Transcript
SD-720Audio Intercom System
Handset Fitting points
Instruction Manual VER
UNLOCK CALL
A6.0
1.Features (1).1pc doorstatio n plus 1pc interphone, eas y wiring; (2 ). Dual-way communication; (3). Auto door -releasing by interphone; (4). Stylish design, aluminum front panel doo r station; (5). Two doorstation s optional fo r different matching; (6). Four interphone s optional for different matching; (7). Alarm callin g be available o n interphone whe n connected with alarm .
6-terminal
Weight: 0.7kg; Power consumption: Stand-by: <0.5W,Operating: 2.0W 6-terminal 1. +12V, to DC12V+ 2. GND to ground or DC12V3. R2 to R2 of door station terminal 4. R1 to R1 of door station termianl 5. L+ to Lock+ 6. L- to Lock-.
3
SD-720AR7 Handset
2.Operation lnstructions Fitting points
Visitors push Call button on door station, chime"DingDong rings simultaneously from interphone.Hosts pick up receiver to communicate with visitors.Press Unlock button to release door after confirmation.
UNLOCK CALL
6-terminal
3. Accessories 1 pc Door-station 1 pc Inter-station
Each extension matches a power
4. Specifications Interphones 1
SD-720AR4
Weight: 0.6kg; Power consumption: Stand-by: <0.5W,Operating: 2.0W 6-terminal 1. +12V, to DC12V+ 2. GND to ground or DC12V3. R2 to R2 of door station terminal 4. R1 to R1 of door station termianl 5. L+ to Lock+ 6. L- to Lock-. 1 SD-720D
6-Terminal
Speaker 2-terminal Microphone
HANDSET
CALL
Weight: 0.3kg; Power consumption: Stand-by: <0.5W,Operating: 1.8W Weight: 0.7kg; Power consumption: Stand-by: <0.5W,Operating: 2.0W 2 SD-720D2 2 SD-720AR5/AR6 Speaker
Handset
Bell ring
2-terminal
Microphone
Fitting points UNLOCK CALL
CALL
6-Terminal
Weight: 0.4kg; Power consumption: Stand-by: <0.5W,Operating: 1.8W Bell do not ring
Weight: 0.6kg; Power consumption: Stand-by: <0.5W,Operating: 2.0W
2-terminal:
1. R1 2. R2
to R1 of interphone back terminals to R2 of interphone back terminals.
* SD-720D6 installation
3 SD-720D6 SCREW Speaker Broadcast the voice from the host
Step Two
Call button Chime "ding dong" sound can be heard from inter-phone, when the button is pressed, the camera works simultaneously.
2P LINE
Rear view
Microphone Pick up the voice of the visitor.
Rain cover
2P LINE FUNCTION DESCRIPTION: RED (R1) Black (R2)
Step One
SCREW
Fore view
2-terminal:
5. Wiring
1. R1 2. R2
Bracket
to R1 of interphone back terminals to R2 of interphone back terminals.
Step Three
SD-720AR4 +12V GND R2 R1
L+
L-
Picture 1
E-lock DC12V
Rain cover
Adaptor
AC SD-720D/D2/D6
SD-720AR5/AR6 +12V GND R2 R1
L+
1
L-
Picture 2
* Interphone installation (1). Drill two holes in the wall as per fixed distance on interphone; (2). Connect interphone terminals; (3). Fix back panel of interphone onto the wall; (4). Fix front panel of interphone onto the back panel; INPUT 230VAC 50/60Hz (5). Connect the handset.
E-lock DC12V
Adaptor
AC SD-720D/D2/D6
OUTPUT
SD-720AR7 +12V R2 GND R1
Picture 3
L+
12VDC
Transportation:
Adaptor
AC SD-720D/D2/D6
6. Installation * SD-720D installation (1). Drill two holes in the wall; (2). Connect door station wiring; (3). Fix the bracket on the wall; (4). Fix the door station on the bracket.
* SD-720D2 installation (1). Scoop a tank on the wall at 48mm depth and little bigger than flush box; (2). Fix the flush box into the tank; (3). Connect door station; (4). Fix door station to flush box. Note: Flush box dimensions: Length: 120mm Width: 115mm
2
L-
E-lock DC12V
3
4
1
3
2
1. All the products are shipped under find condition. Pls do not take apart the packing. Pay attention to avoid moisture, dust and shock; 2. Fine-packed products should be stored in a room with atmosphere temperature -10~+40, relative humidity less 80%, no corrosive gas and good ventilation 3. The mains plug is used as the disconnect device and shall remain readily operation. 4.The apparatus shall not expose to dripping or splashing. 5.The apparatus power by AC/DC adaptor. To reduce the risk of electric shock, do not open the adaptor. 6.The AC/DC adaptor is used as the disconnect device and shall remain readily operation.
