Sd Card Memory

Transcript

www.kocom.co.kr KCV-434SD / KCV-D434SD MANUAL [ Operating Installation Manual ] SD Card Memory COLOR HANDSFREE ■4.3" Digital Color LCD Monitor ■Slim, Compact & Luxury Design ■Easy to operate using OSD menu & Touch key ■Digital Photo Album ■Digital Video Recorder ·Motion Detection ·Memory Size : up to 32GB(SD Card interface) ·Video Format : Moving picture(MPEG-4), Still cut : JPEG ■Multiple language support ·English, Spanish, French and Russian ■Connection up to 2 Door cameras ■Guard Phone, Lobby Phone Operating ■Call & Communication with visitor & Door open function ■Door opener connectable from camera KCV-434SD / KCV-D434SD Monitor color KC-MC24 White KC-MC20 KC-C60 KC-MC30 Black Connection door Camera KLP-C420 Cautions for safety For safe use, please stick to the following cautions. ·Please, save this manual after reading these instructions carefully. ·Read and understand all instructions to set up rightly. ·This Cautions for Safety may include items that are not contained in specifications of the product that consumer purchases. ·If you need assistance with the set-up or operation, please contact with A/S center. The important marks in the manual. To help our customers to understand this manual, to prevent any personal injury or property damage, some marks are used in the manual. The marks and the drawing signs are below. Please, understand the marks before reading the manual. The meaning of the drawing signs. Sign to show what not to do. Mishandling the device with ignoring this sign may result in serious injury or death. Mishandling the device with ignoring this sign may result physical injury or material damage. Sign to tell you that you should follow the instructions. Sing to tell you that you need more attention including (high voltages, electric shock, danger, warning) Sign to tell you that you can't disassemble this unit. Sign to tell you that you must unplug the unit. Caution Cautions for set-up ·The law limits distributing the power lines to an authorized person from government. The work from an unaurhtorized person cause fire or electric shock. ·Place this unit securely on a stable surface. Serious damafe and/or injury may result if the unit falls. ·Do not set up this unit near the leaking place because it may expose you to dangerous voltages or other risks. ·Even if your product is water proof, do not install it slanted place of water leakage, which can a short circuit. ·Fix the product on the wall safely according to the installation guideline to prevent any damage or injury. ㆍDon’t put any stuff in 30cm around the monitor, not to block the air hole. ·The work of distributing wires needs skills and experiences. So please, for assistance, contact your dealer or call service center. ·The communication lines should be built in being distant from the power source. This may result in the risk of fire, electric shock and communication disorder. ·Setting the communication lines in a high humid place such as outside without any protection from rain causes the communication disorder. ·Keep the hook at the wall-mounted device safe. The hook may cause the physical injury. ·Think about the thickness and quality of wall material. The unqualified material may make the device fall. ·Set the device of the wall-mounted type not to fall. Falling from an earthquake causes personal injury. Cautions for Repairs and Maintenance ·Keep the inside of the device clean. Having the dust inside without any cleaning for a long time causes the fire. If necessary, contact your dealer or service center to get cleaning service. ·Unplug this device when you want to check the inside. If there is no plug, please, turn off the circuit breaker. ·Unplug this device when you try to move it to another place. If the electric line is connected inside of the unit, please contact your dealer or service center. ·Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Warning Warnings for Usage ·Do not install this unit near the water and dust, for example, in a bathroom or near the washing machine. It caused fire and electric shock. ·Do not install this unit near the fire, for example, near kitchen sink, heater or the like. ·Do not install near the noxious gar such as Hydrogen Sulfide, metal power and the like. ·Do not install near the water and chemicals. ·Do not give any damage, break and modify the plug. Overloading, heating, pulling causes the damage. ·Do not place the plug near the heater. The damaged code causes fire and electric shock. Do not pull the power code when unplugging. ·The damaged code causes fire and eclectic shock. Must pull with plug. Do not touch with wet hands. It causes the electric shock. ·Do not use any other voltage, except the marked regular voltage. ·Do not use the power terminal at the units to other electric device except the designed device. ·Do not install the units at the leaking place if it doesn’t have any waterproof mark. Do not install the unit when the power is on. ·Install the circuit breaker after checking the safety such as electric shock and leakage. Turn off the power before you install or A/S ·Check the suitability of the lines for installing when you use the exiting lines. ·Do the wiring work by using the designed material. ·Connect the electric wire with the designed ways and ground. ·Do not connect with any other devices except the designed devices to compose the system. ·Unplug electric wire and communication lines from the units before moving to another place. 2 Cautions for Use ·This unit is not designed for security purpose. 쪾·Do not handle the unit with the wet hands. ·Do not place a pot with water or a small metal material on the Units. ·Do not cover the ventilating opening or put any metal material in the units. 쪾 ·During thunderstorms, avoid using this unit. There may be a remote risk of an electric shock from lighting. ·Do not modify the unit. ·Open the main gate after checking ID if the image and sound system do not work. Call A/S ·Do not disassemble the back and cabinet cover. Cautions for Abnormality ·Change the damaged electric code. ·Unplug this unit from plug socket and refer servicing to an authorized service center when the following conditions occur: ·If liquid has been spilled into the unit. 쪾·If the unit does not work normally by following the operating instructions. ·If the unit exhibits a distinct change in performance. ·If the unit has been dropped or physically damaged. ㆍThe mains plug, as a disconnection device, shall remain readily accessible by the user. Caution Safety Instructions, Warnings and Cautions of Each System ·Do not disassemble this unit at will as this device is composed by precision parts. 쪾 ·Install the unit by following the set-up instructions of Kocom. ·Do not touch or insert any foreign substances, for example, sticker, magnetic, opener and the like. ·Make U-type at the end of wires as the rain can effect on the system by following the wires during the rainy season. Videophone ·Separate the AC/DC lines with the hook of the wall-mounted type when installing. 쪾 ·Do not distribute signal line with AC line. ·Do not clean the LCD with the damp cloth for cleaning. Use the only dry and soft cloth. ·Connect the lines after peeling the wires properly. ·Use the designed driver to connect the lines to terminal. ·Do not install the main gate monitor at the leaking place. Things You Need to Know ·This product is designed as a home videophone and cannot use continuously like monitor camera. ·If there is temperature difference between inner part of camera and surrounding, dew condensation occurs on camera lens and may disturb image. If dew condensation is removed from camera lens, image quality recovers. ·White LED light examination range is narrower than camera shot range at night, so there is less amount of light at night than day. So it is difficult to see the face in low illumination condition due to noise increase on screen, but it is not from defect. ·Monitor screen (liquid crystal panel) is not in defect when some pixels always light or black out. ·Please install monitor and camera over 5cm away. Also, avoid installing at a place with too much noise, because too much noise around camera causes phone call inferiority. ·Do not place an object within 20cm in front of monitor. It causes phone call inferiority, especially because microphone is installed at the top of monitor. ·If strong light such as sunlight flows into camera module, screen saturation (or strange mark) and image shaking might occur. ·This is not a defect, so please do not install camera where a direct ray of light do not flow if possible. Cautions ·In some cases there is occurrence of product destruction, malfunction, noise mixing and picture quality deterioration due to mixing of other tool's induced. voltage or thunder with communication wiring of monitor/camera, monitor/extended monitor. Do not wire with power line such as outdoor wiring or AC power, or phones and other tools. ·You cannot use it if you incorrectly wire the AC voltage between monitor/camera, monitor/extended monitor. Call the store or agency where you purchased this product and consult to solve the problem. Beware that unfixable damage might be caused due to authorizing AC voltage on communication wiring of monitor/camera, monitor/extended monitor. ·Do not ever disjoint this product. It may cause electrocution accident when touching high-voltage circuit inside this product. ·Outside power authorizing this product must be confirmed of product description and use rated voltage. Beware that if higher voltage is authorized, unfixable damage might be caused due to product destruction. ·Power must be connected to domestic voltage (product rated voltage) consent or interior wiring. If connected to other motive power or inverter-type power, product destruction, noise mixing, and picture distortion may occur. ·Do not drop this product. Glass is used for monitor and might break, or cause other circuit inferiority. In such case, immediately turn down the power switch, and call to consult agency or store in which this product was purchased. ·Keep away from any conditions where water splatters or falls. Do not place anything containing water like a vase on the product. ·If installed near transmission antenna such as broadcasting station, electric wave may mix and cause picture distortion or voice mixing. ·Avoid installing near tools with strong electromagnetic waves such as microwaves and cell phones, or it may cause picture distortion. ·Do not install monitor in following places. ① Above or around water heater, rice-cooker, heater ② Place exposed to direct rays of the sun ③ Place with temperature below 0'C such as cold store ④ Place with high humidity such as bathroom, washroom, heated room ⑤ Place with a lot of gas, dust, smoke ⑥ Dangerous place with sprays of water or chemicals ·Do not wipe with insecticide, drugs or chemicals such as thinner and alcohol, or it may damage the surface of this product. ·Beware of occurrence of image quality deterioration or malfunction from cause of humidity due to penetration of chemicals or water into camera’s urea resins. ·As in the picture, it prevents temperature difference of camera (outside) and monitor (inside), and removes dew condensation caused by humidity of camera window. ·Camera must be installed when wall cement is completely dry. ·When product is installed in winter below -5'C, wait for approximately 2 hours to connect. Dew formation in monitor and camera due to temperature difference inside and outside may cause product defect. ·Avoid installing monitor and camera in place directly exposed to heat or where gas noxiousness is highly occurring. 3 Installation location ■ Monitor installation location ■ Camera installation location ·Standard monitor installation height is about 1,500mm where screen center is at eye level. In this case, wall-hanging metal center (center of piping) is 1,450mm above ground level. ·Standard installation height ·Camera installation in height Standard camera installation height is when lens is about 1,400mm above the floor. In this case, camera stack center (piping box) is above 1,390mm above ground level. ·Standard installation in height ■ Caution of camera installation ·Avoid installing camera exposed to direct ray of light (and sun). ·Beware backlight and darkness of visitor’s face, which makes identification difficult. ·Avoid installing camera in places such as the following picture. (1) Place illuminating sky as background (2) Place with white wall reflecting direct ray of light (3) Place with direct ray of light ·Standard installation in height ■ Monitor installation ■ Directly connecting cut-off power cord with power wire 1) Do not do such electric work on your own. Installing product in this way requires reliance on electric installation man with electric work license. 2) Insulate with insulating tape while cutting off power cord and connecting with power wire so electric wire metal does not expose. Contact between exposed electric wires cause fire or electric shock accident. 3) Such electric work requires connection after interception of supplied power. 1) Remove wall-hanger bracket metal behind monitor. 2) Install wall-hanger bracket metal on 1 type box or wall with attached Vis. 3) Connect wiring to monitor back terminal referring to product connection diagram. 4) Hang monitor on wall-hanging metal, and fix monitor on wall- hanger bracket metal using attached Vis. 5) Plug monitor’s power plug into consent and check to see if the power switch is [ON] on the left side of monitor. ■Door camera installation KC -MC30 KC-MC20 Wall 4X25mm Screw Camera front Wall Screw (2X8mm) Screw (3X5mm) Wrench Rear Bracket 4X8mm Screw Name plate Main body supporter Camera Terminal Block Standard wire strip specification : 6~7mm Standard wire (AWG) : 16~24(0.5mm~1.2mm) KC-MC24 Wall Screw (4X16mm) KC-C60 Wall Camera front Screw (4X10mm) Camera front Screw (4X10mm) baby support Upward support ※ After fix the rear bracket with 4 screw, put the Door Camera into the grooves of rear bracket, 4 and then fix it with hexagon screws and stick the finishing materials. Screw (2.6X6mm) Components of product ■ Monitor ■ A Wall hanger frame ■ Wire 4 Pin cable for camera 2ea ■ Screw for fixing monitor 4X25mm 4ea (Flat head type) 3X8mm 1ea ■ Door Camera [KC-C60] 4X10mm 2.6X6mm Screws for fixing main body on the wall [KC-MC24] Finishing rubber Screws for fixing camera to main frame supporter 4X10mm Screw for fixing camera Upward adjusting supporter for lens angle Main body Supporter [KC-MC30] 4X25mm Screws for fixing main body on the wall 4X8mm Screws for fixing camera to main frame supporter Main body Supporter 4X16mm [KC-MC20] Screws for fixing camera 3X5mm or Screw for fixing camera "L" wench Main body Supporter Screws for fixing camera main body supporter Scre cap (KC-MB30) 2X8mm Main body Supporter ■ SD CARD(※Option) Maximum Available Capacity : 32GB(SDHC) SAND DISK - MLC Method, CLASS-4 KING MAX - MLC Method, CLASS-6 Bareun Electronics - MLC Method, CLASS-4 ※Do not use any SD card besides the one that is compatible. This may damage the product. The company will not be responsible for such damage. Specifications MONITOR DOOR CAMERA Model No. Power Source KCV-434SD AC100V-AC240V 50/60Hz Power Consumption Standby 3W(±20%), Max 12W(±20%) Operating Temperature 0℃ ~ +40℃ LCD 4.3 Inch color LCD Communication Systerm Handsfree type Wiring Door camaera wiring - Polarized 4 lines (VCC[12V]/GND/VOICE/VIDEO) Mount Type Surface mount Dimension 140(W) X 195(H) X 32(D) mm SD Card Model No. Power Source Power Consumption Operating Temperature SDHC 4GB~32GB, MLC TYPE, CLASS 6(minimum) KC-MC30 KC-MC24 DC 12V±1V (Power from Monitor) Max 3W -10℃ ~ +50℃ KCV-D434SD DC 15V-2A (JPW128KA1502N05) KC-C60 KC-MC20 ※ Door Camera Wiring - Polarzied 4 lines (VCC[12V]/GND/VOICE/VIDEO) 5 Name and Functions of each part ■ Monitor ·Right Side ·Front 3 4 1 ·Left Side ·Back 9 10 13 12 11 2 5 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ 6 7 14 8 LCD Monitor Speaker Microphone State LED Menu Button Monitor Button Talk & Guard Button Door open Button ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ Call sound volume adjusting switch Speaking volume adjusting switch Power Switch SD Card input section Camera connection teminal AC Power Cord ■ The front side ■ The back side KC-MC30 KC-MC20 KC-MC30 KC-MC20 ① ⑦ ② ① ② ③ ④ ⑤ ⑥ ③ ④ ⑤ ⑥ KC-MC24 ⑧ FG(FRAME GROUND) KC-C60 KC-MC24 KC-C60 ③ ② ④ ⑤⑥ ④③②① ⑤ ① ① ② ③ ④ C-Mic : To communicate with Monitor Camera Lens LED Speaker : When visitor calls, the voice from monitor comes out of the speaker. ⑤ Call Button : By pressing the button, the related house will be called. ⑥ Name plate 6 ① VCC ② GND ③ Audio ④ Video ⑤&⑥ Door (Non-Polarity) ⑦ Camera angle knob (Only KC-MC/MB30) ⑧ Wire clamp ①②③④ Product connection diagram ■ System configurations(Camera Mode) Polarized 4wire 2wire DC Door opener Door Camera External power input Polarized 4wire 2wire KCV-434SD DC Door opener Door Camera External power input ■ System configurations(Guard Mode) Polarized 4wire 2wire DC Door opener Door Camera External power input Lobby Phone Polarized 4wire KCV-434SD 4wire KVS-A4P / KVS-A8P Guard Phone Reapter 7 Product connection diagram ■ Name of each connection port ■ Camera connection wiring CAM 2 CAM 1 1 1 6 1 4 1 12 4 1 2 ①②③④ 1 2 3 4 ①②③④ TO CAMERA 1. VCC 2. GND 3. AUDIO 4. VIDEO ① ② ③ ④ ① ② ③ ④ ※ Caution for Camera Installation Because of condition or atmosphere, Monitor can't detect automatically NTSC or PAL. In that case, turn the monitor power off and on again. ■ Cable requirement - Based on distance from a camera to the monitor ·Upto 100M : CAT5 cable Orange W/Orange ① VCC Green W/Orange ② GND Blue W/Orange ③ Audio Brown W/Orange ④ Video double up double up double up double up ※According to outside environment, you may view the images somewhat unclear. However, they do not result from any defect or trouble of the product. 8 ※ CAT5 wire configuration ※ In case of more than 50m of CAT5 cable length, the screen and voice quality can get lower. But the sympthom is not a kind of fault. So less than 50m is recommended. ·Upto 50M : TIV 0.65㎟cable ·Upto 100M : Over TIV 0.8㎟cable ·Upto 150M : TIV 0.8㎟cable + RG-59 / U RG-59 / U (Coaxial cable) for Video signal (Connect core to Video & shield to GND) Instructions for operation ■ Communication with door camera H ell o Push the call button. The camera melody is turned on. You can hear call sound from monitors, and camera image comes out on screen. (Standby time : 30 sec) Push the talk/guard button [ ] andcommunicate with the door camera (Communication time : 3 minutes) Push the talk/guard button [ ] again and stop the communication. ■ Camera monitoring Push the monitor button [ ] when there is no image on monitor screen. Camera image appears on screen. (Monitoring time : 1 minute) Push the monitor button [ ] 2 time and the image of camera 2 appears. H ell o Push the monitor button [ ] again and stop the communication. Press the talk button [ ] while monitoring and start to communicate with the calling camera. Push the talk button [ ] again and stop the communication. ■ Door open H ell o While 'Talk' on, the door open button [ ] and the door will be opened. About 5 seconds after pushing the button, stop the communication automafically. ■ Sound Adjustment ● Call Adjustment : See the side of monitor and find Call Vol. consisting of 3 level(High/Mid/Mute). ● Receiver Adjustment : While communicating, adjust R. Vol. consisting of 3 level(High/Mid/Low). ■ Brightness Adjustment On Monitoring(or talking), push [Menu] and the brightness icon will appear. At this point, adjust the brightness with the keys, UP / DOWN / ENTER. ■ Call Sound (MELODY) MUTE Function Press Open Door button under Standby Condition for two seconds or longer and "MELODY MUTE ON" will appear on the screen. If it has been set, you will not hear any sound when there is a call from Porch, Lobby or Guards. Repeat the Setup method to cancel. Then, "MELODY MUTE ON" will appear on the screen. 9 Instructions for operation ■ If there is a call from Lobby/Guard When interworking Lobby/Guard, set up in the menu. ( [MENU] → [5.System Set] → [4.Cam Set] → [2.Cam1 Select] or [3.Cam2 Select] : System) This fuction is for Guard Master, KLP-C420, KVS-A4p or KVS-A8P. Re calling sound H ell o Lobby Phone or Guard Phone to call ahousehold. Monitor gives a calling sound and the visitor is shown on the screen. Guard Phone has no screen and there will be call sound only (Call standby : 30 seconds) Press the talk/guard button [ ] to call. While calling, press the talk/ guard button [ ] to end. (Call time: 3 minutes) *OSD : CAM1 or CAM2 Display While calling, press the door open button [ ] to open the common porch and in five seconds, the call will automatically stop. (★Door Opening is available only when using a lobby phone.) ※If you see the recorded video image call from the lobby. ■ Call Guard Master on System mode set This function is for Guard Master. KLP-C420, KVS-A4P or KVS-A8P. On Standby, push the talk/ guard button [ ] When the guard picks up. the talk starts. (Communication time : 3 minutes) *OSD : CAM1 or CAM2 Display ※Do not you see the recorded video image call from guard. Specification ·SD CARD Maximum Available Capacity : 32GB(SDHC) SAND DISK - MLC Method, CLASS-4 KING MAX - MLC Method, CLASS-6 Bareun Electronics - MLC Method, CLASS-5 Be careful when use other SD Cards except listed above since they may cause error. ※Highly recommend to use the original SD card packed together with the product. ·Video Image Storage Resolution → NTSC : 704 X 480 / PAL : 704 X 480 / FORMAT : MPEG-4 ·Image Storage Resolution → 704 X 480 / JPEG FORMAT ·DIGITAL FRAME FILE SIZE → Max. Resolution : 2048 X 1536 Pixel, MAX. file size is below 2 MB. Note : Only is the file satisfied with Digital Frame size available. ·Playback the video image stored in SD CARD from PC. PLAYER : KOCOM PC VIEWER, GOM PLAYER, KMPLAYER ·KOCOM PC VIEWER Download : www.kocom.com (EX : Search : KCV-A374SD) 10 While Guard Talk on. Push the talk/guard button [ and Guard Talk finishes. ] Instructions for operation ■ Absence Setup and Recording the image of a door camera Set up Absence in the menu. When a visitor calls at the porch, porch images will be automatically recorded. (Refer to the Menu to set up your leave.) Absense Set : Menu >> 1. Absens Set (LED: Red flickers) ■ Porch motion recording by motion setup If you set up Motion Recording in the menu, when there are motions while monitored, automatic motion recording will begin. If you set up Motion Recording, only for CAM2, automatic motion recording will start when there are motions in standby conditions. (If CAM2 is set up as GUARD, you cannot record motions in CAM2. Motion recording time: 20 seconds) (As Electronic Album is set up, motion recording will be automatically turned off.) (In Menu, appropriately set up motion and motion sensitivity.) Motion Set : Menu >> 3. Rec Set >> 3. Motion set ■ General reccording Recorded files will be saved only in SD CARD. Therefore, if there is no SD CARD, there will be no recording.All recording excluding motion recording will be saved according to Menu REC SET>>SAVE MODE SET:CAMERA(Still Images) and MOVIE(Moving Images) files. Still images are saved in Image Folder in SD CARD and moving images will be saved in VIDEO Folder. ■ Notice for recording When there is any porch image, if you press[MENU] , images may be recorded manually. If you press [MENU] while recording, recording will be finished. ■ System Time Setup Set up system time: Menu>>SYSTEM SET>>TIME SET. Time display when recording shall be done with system time which is initialized when released from the plant. It is necessary to reset when using it for the first time. (★ Reset product time regularly as errors occur according to environment of use.) ■ Digital Frame This is to show JPG files in SD CARD consecutively on the screen. In Menu, set up Digital Frame and it will work in standby positions according to the setup. It will work as long as set up in Menu and automatically stop. If the porch sends a call while Electronic Album works, electronic album motions will stop. It will work again as standby conditions occur again. (★ As motion record setup is decided, electronic album function will be automatically turned off.) Digital Frame Set : Menu >> 4. Digital Frame 11 MENU Setting 1. Absense Set - Absence setup. If you set up, porch / lobby call images will be automatically saved. (As Absence is set up, LED will flicker in red.) (Setup : [MENU] Key>>1. Select Absense Set >>[ENTER] Key>> Select YES >>[ENTER] Key) 2. Play Folder - Play or delete saved moving images, still images, or file albums. - Play Folder>>In PLAY SELECT, you can select: 1.VIDEO, 2.IMAGE, 3.ALBUM. ① VDIEO : Play or delete a file saved as a moving image. ② IMAGE : Play or delete a file saved as a still image. ③ ALBUM : Preview or delete an album file. - VIDEO Folder : You can play or delete a file saved as a moving image. (How to Play or Delete : [MENU] Key>>2. Select Play Folder >>[ENTER] Key >>1. Select VIDEO >> Select File >>[ENTER] Key>>Select Play or Delete>>[ENTER] Key) - IMAGE Folder : You can play or delete a file saved as a still image. (How to Play or Delete : [MENU] Key>>2. Select Play Folder >>[ENTER] Key >>2. Select IMAGE >> Select File >>[ENTER] Key>>Select Play or Delete>>[ENTER] Key) - ALBUM Folder : You can play or delete an electronic album file saved in SD. (How to Play or Delete : [MENU] Key>>2. Select Play Folder >>[ENTER] Key>>3. Select ALBUM >>Select File >>[ENTER] Key>>Select Play or Delete>>[ENTER] Key) 3. Rec Set - Record Setup. ①Save Mode Set, ②Rec Time, ③Motion Set, ④Set up OverWrite. ①Save Mode Set : Set up automatic recording when leaving and method of recording when recording on general occasions. ·Camera(Still images), Movie(Moving images) ②Rec Time : Set up automatic recording time when you are outside. ·30sec / 2min / 5min ③Motion Set : Set up motion recording. ·OFF - Motion record setup OFF , ON - Motion record setup ON ·Motion sensitivity [1~10] ④OverWrite : Set up overwriting. 4. Digital Frame - Set up an electronic album. - OFF : Electronic album off , ON : Electronic album on, FIX - Fix Chapter 1. (★ ON : Play the files in ALBUM Folder consecutively and sequentially.) (★ FIX : When it is FIX, you will be directed to Play Album File, Select Screen as follows.) - 30MIN / 1HOUR - Electronic album working time 5. System Set - Set up in relation to system setup. ① Time Set : Set up system time. ② Melody Set : Set up CAM1,2 call melodies. ③ Monitoring Time Set : Set up time for camera monitoring. (CAM1 :1M(1 minute)/3M(3 minutes)/5M(5 minutes) , CAM2:3M(3 minutes)/30M(30 minutes)/1H(1 hour) ④ Cam Set ·CAM Adjust : Set up Contrast[0~100] and Color[0~100] of porch images. ·CAM1 Select : MC30/MC24/MC20/C60/SYSTEM ·CAM2 Select : MC30/MC24/MC20/C60/SYSTEM ★ Set up the porch camera at CAM1,2. ★ When you use Guard Phone or Lobby Phone, set up SYSTEM One. ⑤ SD Card ·Total : Total capacity of SD CARD ·Free : Remaining capacity of SD CARD ·SD CARD Format? : Format SD CARD. ⑥ System Info ·System Info : Refer to system information ·F/W upgrade : You can upgrade the system software. ※Software upgrade - Copy Firmware, Root Dir., SD CARD. - In the above menu, select F/W upgrade and press [ENTER]. - Select YES and the software will be automatically upgraded. ★ Notice : If you turn off the power or take out SD Card, it may damage the product. Therefore, wit until automatic rebooting after an update. ⑦ Language Set : Set up Language. (Language : English / Russian/Espanol/French) ⑧ Default Set : This is to initialize product setup to the conditions of release from plant. 12 MEMO 13 Warranty To receive after service, have the following ready before you contact our branches. 1. Name of the product. 2. Model number of the product. 3. The area of problem. 4. Phone number and address at which you can be contacted. Warranty Card PRODUCT MODEL DATE PURCHASED WARRANTY PERIOD AGENCY ADDRESS KOCOM Warranties the original purchaser of this product as follows. 1) This product is produced under strict quality control and inspection procedures. 2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge. 3) The following cases will be subject to charge, even during warranty period: a. Breakdown during transport, or through careless treatment, by consumer. b. Breakdown cause by unauthorized repair, or system modification. c. Breakdown caused by natural disaster or power disorder. SINCE 1976 This manual is based on the date as shown in the right and specifications are subject to change without notice for quality improvement www.kocom.com E-mail : [email protected] KCV-434SD / D434SD P0323