Sd Set Top Box

Transcript

SD Set Top Box User Manual SH-SDST01 shintaro.com.au SD Set Top Box Contents Safety Information 4 Introduction 6 System Connection 8 Getting Started 10 Operation 13 System Setup 16 Tools 19 Multimedia Playing 21 Timeshift 23 Troubleshooting 24 Specifications 26 shintaro.com.au Safety Informations To reduce the risk of fire and electric shock, do not expose this unit to rain or moisture. Please read these precautions before operating this unit. Power cord protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. • Hold the plug firmly when connecting or disconnecting the AC power cord. • Keep the AC power cord away from heating appliances. • Never put any heavy object on the AC power cord. • Do not attempt to repair or reconstruct the AC power cord in any way. • Never make or change connections with the power switched on. Placement Avoid placing the unit in areas of direct sunlight or heating appliances, or closed automobiles high temperature (over 350C) or high humidity (over 90%) or high dust areas as the internal parts may be seriously damaged. Non-use periods When the unit is not being used, turn it off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet. No fingers or other objects inside Touching internal parts of this unit is dangerous, and may cause serious damage to the unit. Do not attempt to disassemble the unit. Do not put any foreign object in this unit. Keep away from water/magnet Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage could occur. Never bring a magnet or magnetized object near the unit. Stacking Place the unit in a horizontal position, and do not place anything heavy on it. 4 Condensation Moisture may form on the lens in the following conditions: • Immediately after a heater has been turned on in a steamy or very humid room when the unit is suddenly moved from a cold environment to a warm one. • If moisture forms inside this unit, it may not operate properly. In this case, turn on the power and wait about one hour for the moisture to evaporate. If there is noise interference on the TV while a broadcast is being received Depending on the reception condition of the TV, interference may appear on the TV monitor while you watch a TV broadcast and the unit is left on. This is not a malfunction of the unit or the TV. Recycling This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. For more information, please contact the local authority or your retailer where you purchased the product. 5 Introduction About the STB Front panel Remote sensor Standby button USB port Power indicator Rear panel RF Input for an external aerial TV Scart for connection to your TV Coaxial Digital Audio VCR Scart for connection to a VCR RF Loop through for an external device 6 AC Mains Remote control STANDBY SUBTITLE AUDIO MUTE 12 13 1 14 2 PLAY/PAUSE 3 STOP MENU 15 EXIT CH+ 4 5 5. CH+CH-/VOL+VOL- Button (navigation buttons use to navigate with the menus Channel Up and Down, Volume Up and Down) OK Button (Confirm a selection within a menu) 6. RECORD (Record the current TV to the Hard disk through the USB slot) 7. Numeric entry (Enter numeric values and select channel numbers) 8. DEVICE (Change the working section of Hard disk) 9. FAVORITE (Open the Favorite list) 10. TELETEXT(Open the interactive function 11. DIGEST (Enter multi-picture to get digest of all programs) 12. SUBTITLE (switch subtitles on and off) 13. AUDIO (Select audio: Left / Right / Stereo / Mono) 14. Multimedia files or photos skip the previous /the next 15. STOP 16. EXIT (Exit from the Menu) 17. TIMESHIFT (Activate timeshift function) 18. EPG (Open up the channel schedule menu) 19. RECALL (Switch to previous channel) 20. FILE (Open the list of recorded files) 21. REPEAT (Choose the mode of playback and repeat) 22. INFO (Press for current channel information / Operation guide) 23. TV/RADIO (Switch between TV and Radio) 24. RED / GREEN / YELLOW / BLUE Buttons (For interactive function/Submenu function buttons) Blue button (Timer function) 16 17 VOL- OK VOL+ TIMESHIFT RECORD 18 6 CH- EPG 19 RECALL 7 8 20 FAV DEVICE FILE REPEAT 9 21 22 TELETEXT DIGEST TV/RADIO INFO 10 23 11 24 25 1. 2. 3. 4. STANDBY (switch the STB on and standby) PAUSE/PLAY Search backward / forward Menu Button (open and close the menu screen) 7 System Connection Connecting to the TV Connecting a HiFi system 8 Connecting a video recorder 9 Getting Started Switching on for the first time 1. Turn on your TV set and select the desired input (with the AV key, or via the television remote control). 2. Plug the Set Top Box into the mains supply. The power indicator on the panel is green. Then the “First Time Installation” menu appears. Press “LEFT” and “RIGHT” button to choose “OSD Language” and “Area”. 3. Press “OK” button to start the first time installation. The following message is displayed. In it In sta ll ? D o you w ant to in stall? Yes No O SD Language E n g lish A rea xxxxxx E nglish xxxxxx xxxxxx xxxxxx IN FO : O peration g uide 4. Press “LEFT” and “RIGHT” button to highlight “Yes” and then press “OK” button. The system starts to search all channels for available radio and TV stations. 10 Installation 1. Press “MENU” button to enter the MAIN MENU. 2. Press “OK” button to highlight “Digital TV”. 3. Press “UP” or “DOWN” button to select the “Installation”, and press “OK” button to confirm. Installation D igital T V A uto Se arch Channel M anager Manual Se arch Installation A rea Se arch Configuration Factory D efault V ersion Softw are U pgrade IN FO : O peration guide IN FO : O peration guide Auto Search 1. Press “MENU” button to enter the Main Menu. 2. Press “DOWN” button to Select the Installation. 3. Press “OK” button to “Auto Search”. Installation Channel Search S.N o. TV Channel A uto Se arch S.No. Radio Ch annel Manual Se arch A rea Se arch Ch an ne l xx U HF Prog re ss xxxxxxKH z/ 8M 86 % INFO : O peration guide 11 Manual Search 1. Select the Manual Search and press “OK” button to confirm. 2. Press “LEFT” or “RIGHT” button to select the desired option. 3. Press “OK” button to confirm. Manual Search Channel N umber F req(KH z) B a n dW idth 21 474000 8M Stre ng th Q ua lity 21 22 23 24 25 26 27 28 29 2 0% 2% IN FO : O peration guide Area Search 1. Press “UP” or “DOWN” button to highlight the “Area Search” . 2. Press “OK” button to enter the “Area Search” 3. The Area Search window will displayed. Press the numeric buttons to “Start Freq (KHZ)” 4. Press “DOWN” button to “End Freq (KHZ)” and enter a frequency. 5. Press “DOWN” button to “BandWith”,Use “RIGHT” button to choose the “BandWidth”. 6. Press “OK” button to “Area Search”. Area Search Start Freq(KHZ) 474000 E nd Freq(KH Z) B andW idth 474000 8M NOT E Yo u ca n ch an g e th e freq u en ce a n d ban d w idth by ch oo sin g th e "A re a ". Select th e co n u ra tion m en u , set th e "A re a" at th e "System Setu p " or c h oo se th e A re a w h en th e in itia lizat io n of th e STB . IN FO : O peration g uide 12 Operation Channel Manager Q U ICK SE LE CT Changing Channel 1. Selection by Channel list • Press “OK” button to enter the “QUICK SELECT”. • Press “UP” or “DOWN” button to select channel . • Press “INFO” button to display the navigation window. • Perform the correlative operation with the guide. 2. Selection by EPG • Press “EPG” button to the “EPG” window • Press “UP” or “DOWN” button to select channel. • Press “INFO” button to display the navigation window. • Perform the correlative operation with the guide N one S.N o. Channel N ame 0104 0100 0083 0082 C h a n n el N a me Teletext o n 4 Sky Spts N ew s Sky N ew s : O peration ININ FOFO : O peration guide guide Daily Mode Date 01/01/2000 Time 02:10:21 0082 0075 0032 0029 0028 0014 01/01/2000(Saturday) S ky N ew C ITV E 4 +1 E4 I TV 4 M ore 4 IN FO : O peration g uide 3. Selection by Number • Enter the channel list number directly by remote control to select desired channel. 13 Organize Channel 1. Press “MENU” button to enter “Main Menu” 2. Press “OK” button to enter “Channel Organizer” 3. Press “UP” or “DOWN” button to a channel for “Organize selection” 4. Press “INFO” button,then perform the correlative operation with the guide Channel O rganizer S.No 0001 0002 0007 0011 0012 0030 E ngland Channel name Fa v Move Lock Del B BC O N E B BC TW O B BC THREE SKY THERR U KTV H istory CCBC Channel R ow ridge 6 66000KH z/ 8M IN FO : O peration g uide RED button: For fav selection GREEN button : For move selection YELLOW button: For lock selection BLUE button: For delete selection Channel Sorting 1. Press “MENU” button to enter “Main Menu” 2. Press “OK” button twice to enter Channel Manager 3. Press “CH+/CH-” button to select “Channel Sorting” 4. Press “OK” button to enter the “Channel Sorting” window 5. Press “INFO” button,then do the correlative operation with the guide Channel Sorting First O ption A ll Area Second O ption Scramble Third O ption LCN- NOT E Th e d efa u lt pa ssw o rd fo r Lo ck a n d D eletion is "0 0 0 0 ". Th e su per pa ssw o rd is "8 8 8 8 ". S.N o 0102 0500 0723 0724 0725 Channel Name Teletext cars TPS talksport 3C Premier Radio IN FO : O peration guide 14 G reece Austrialia All A rea Freq Bandwidth 546000k 8M 546000K 8M 5 62000k 8M 562000K 8M 562000K 8M Channel Grouping 1. Press “MENU” button to enter the Channel G rouping Main Menu. S.N o C h a n n el N a me Fa v G roup 1 N on e 2. Press “OK” button twice to enter 2 N ew s 01 02 T eletext Cars 3 Scien 05 00 T PS 4 Spor t Channel Manager. 07 23 t alkSPO RT 5 M ovi 07 24 3 C 6 Ki ds 3. Press “UP” and “DOWN” button to 07 25 P rem ier Ra dio 7 M usic 07 28 H ea rt 8 Fa shi highlight “Channel Grouping”. 4. Press “OK” button to select the “Channel Grouping”. IN FO : O pera tion g uide 5. Press “UP” and “DOWN” button to select channel. 6. Press the numeric button to group the selected channel. 7. Press “INFO” button, then choose the correlative operation with the guide. Delete All D elete A ll 1. Press “MENU” button to enter the All TV Channels “Main Menu”. All Radio Ch annels 2. Press “OK” button twice to select the “Channel Manager”. 3. Press “UP” and “DOWN” button to highlight “Delete All” 4. Press “OK” button. A password IN FO : O peration guide window will display. Enter the password. The default password is “8888”. 5. Press “INFO” button, then choose the correlative operation with the guide. 15 Record You can record the current TV program to the Hard Disk by pressing the “RECORD” button. Press the “stop” button to display an interactive window and choose to stop it or not. Note: Be sure the hard disk has enough space to record. A partition error will appear if the STB loses power while the recording. You can repair or format the hard disk to resolve. The STB only recognises FAT format on HDD’s. System Set-Up Many aspects of your STB can be set to reflect your circumstances and preference. The Configuration menu screen is accessed from main menu. The Configuration contains OSD, TV, System Setup, Time, Wakeup Timer, Parental Lock. All the settings will be saved after quitting the main menu. OSD Set up This menu allows you to set the OSD information based on the viewer preference. 1. Enter the OSD menu, press “LEFT” or “RIGHT” button to select the desired option. 2. Press “UP” or “DOWN” button to highlight the next option. 3. Press “OK” button to set. O SD O SD Theme1 Time on O SD ON O SD Timeout 1 O SD Trans 10% O SD Language English MP4 Subtitle Langua English MP4 Sub codepage 8859 1st Audio Language English 2nd Audio Language English NOT E IN FO : O peration guide Wh en th e"Time o n OS D "i s on , the fu nc tion of su btitle is au tom atic o . 16 Themel Theme2 Theme3 Theme4 Theme5 TV Set up This menu allows you to set the TV information based on the viewer preference. 1. Enter the TV menu, press “LEFT” or “DOWN” button to select the desired option. 2. Press “UP” or “DOWN” button to highlight the next option. 3. Press “OK” button to set. System Set up This menu allows you to set the System information based on the viewer preference. 1. Enter the System Setup menu, press “LEFT” or “DOWN” button to select the desired option. 2. Press “UP” or “DOWN” button to highlight the next option. 3. Press “OK” button to set. Time This menu allows you to set the Time information based on the viewer preference. 1. Enter the Time menu, press “LEFT” or “RIGHT” button to select the desired option. 2. Press “UP” or “DOWN” button to highlight the next option. 3. Press “OK” button to set. 17 TV D isplay M od e A spect Ratio V ideo O utput B righ tness Contrast HUE Saturation PA L 4 :3 PS RG B 80% 80% 0 0 A uto PA L N TSC IN FO : O peration guide System Se tup EQ Setup Standard Surround O FF Active Antenna O FF JPEG Effect ON LCN ON Area E ngla nd Tuner Loop Through O FF Auto Standby ON Standard Classic Rock Jazz PO P IN FO : O peration guide Time System Se tu p E Q SetuMode p Sta d a rd Anuto Timer xx/xx/xxxx Surround Date O FF O FF A ctive A ntenna 01:37 Time ON JPE G OE ffset ffect Auto GMT ON LCN OEFF Summer Time ngland A rea IN FO : O peration guide AStandard uto Classic Manual Rock Ja zz PO P Wakeup Timer This menu allows you to set the Wakeup Timer information based on the viewer preference. There are 3 ways to enter the Wakeup Timer menu. W a keup Timer Timer N O Timer M ode W ak eu p M ode W ak eu p C h an nel W ak eu p D ate O n T ime D ura tion D efau lt Par tition 1 O Message BBC FO UR xx/x x/ xxxx 0 1 :4 2 0 0 :0 0 /s da 1 Entering through the main menu: Press “MENU” button to enter the IN FO : O peration g uide “Main Menu”. Press “OK” button to enter “Digital TV”. Press “UP” and “DOWN” button to highlight “configuration”. Press “OK” button to enter “configuration”. Press “UP” and “DOWN” button to select “Wakeup timer”. Press “OK” button to enter the “Wakeup Timer” menu, Press “LEFT” or “RIGHT” button to select the desired option. Press “UP” or “DOWN” button to highlight the next option. Press “OK” button to set. Entering through the EPG: Press EPG button to enter the EPG window. Press “LEFT” to enter the event. Press “UP” and “DOWN” button to select event. Press “BLUE” button to enter the “Wakeup Timer” menu. Entering through the BLUE button: Press “BLUE” button can enter Wakeup Timer menu directly. NOT E W h en y o u c o mplete y o u r s etu p, yo u m u st e xit a ll m en u s , th en system w ill s a ve y o u r s etu p. 18 1 2 3 4 5 6 7 8 Parental Lock Parental Lock This menu allows you to set the TV information based on the viewer preference. 1. Enter the Parental Lock menu 2. Input a correct password using the numeric buttons Tools E nter O ld Passw ord E nter N ew Passw ord C on rm N ew Passw ord E n ter pa ssw o rd NOT E Th e d e fa u lt p a ssw o rd f o r Lo ck a n d D e letio n is "0 0 0 0 ". Software Upgrade Th e s u pe r p a ssw o rd is "8 8 8 8 ". The software may be upgraded via USB 1. Press “MENU” button to enter the “Main Menu” window 2. Press “OK” button to select the “Digital TV” USB Upgrade 3. Press “UP” or “DOWN” button to select [O K] 1 .Rea d D a te [O K] 2.C heck C hecksum “Software Upgrade” 3.U pdate F LA SH 4. Press “OK” button to enter the download 4 .Restart S ystem route, choose the correct upgrade file 3. U pdate FL A SH 5. Press “OK” button to upgrade Users may also download and upload channel data via USB 1. Highlight “Download channel data” item, press “OK” button to download channel list named “channeldata.bin” in USB Device 2. Highlight “Upload channel.dat”, press “OK” button to enter USB Device and select file “channeldata.bin” then press “OK” button to upload channel list to flash. 19 Factory Default D igital TV This function allows you to re-set the STB back to factory settings, clearing all existing channels. 1. Enter “Digital TV” menu, select “Factory Default”, press “OK” button. You are asked to input a password. 2. Input a correct password using the numeric buttons (the default password is “8888”). A confirmation window is displayed. 3. Select “Yes” to return back to factory settings and clear all channels. Select “No” to cancel. 4. Press “EXIT” button to exit. Channel Manager Installation ConfigurationE nter passw ord ? Factory D efault V ersion Softw are U pgrade IN FO : O peration guide ? D o you w ant to perform factory default? Yes Version The Version menu can display some parameters of this STB. 1. Enter the “Digital TV” menu, select the Version, press “OK” button. The Version window will be displayed. V ersio n H/W version S/W version F/W version Checksum Games This function allows you to play games on the STB. 1. Press “MENU” button to display the Main Menu, move the cursor to select the Games item, press “OK” button to confirm. 2. Press “OK” button to enter the “Native Games”. Press “EXIT” button to exit. 20 No Native Games Box Man Tetris H it Ra t INFO : O peration guide DV B-T V x.x xxxxxx_V x.x xxx_xxx_xxxx_xxxx_xxx xxxxxxxx Multimedia Playing This function allows you to play video, audio or photo files from USB port. Movie Playing M o vie 1. Press “MENU” button to display the “Main Menu” 0 0 0 1 / sda window. 2. Select “Movie”. Move the cursor to enter the route of the desired video files. 3. Press the “OK” button to play the desired video files. Music Playing 1. Press “MENU” button to display the “Main Menu” window. 2. Select “Music”. Move the cursor to enter the route of the desired audio files. 3. Press the “OK” button to play the desired audio files. Photo Playing 1. Press “MENU” button to display the “Main Menu” window. 2. Select “Photo”. Move the cursor to enter the route of the desired photo files. 3. Press the “OK” button to play the desired photo files. NOT E Press "RED " button once , and then press can zoom the phot o at 2,3,4 ,1/2,1 /3,1/ 4. o r 21 butt on , M u sic 0 0 0 1 / sda Ph o to 0 0 0 1 / sda Disk Manager 1. Press “MENU” button to display the “Main Menu” window. Select “Disk Manager”. The Disk Manager window will displayed. 2. Move “UP” or “DOWN” button to select the desired files. Press the “Green” button to select play, delete one or delete all of the files Disk Manager Pla y 0001 0002 0003 0004 0005 0006 0007 0008 BBC N EW S 24(06) E4 +1(080317_1 SKY THREE(0604 SKY THREE(0604 SKY THREE(0604 SKY THREE(0604 SKY THREE(0604 SKY THREE(0604 Play/ Del/R enam e ? D elete th e select file? Ye s No Partition-Format 1. Press “MENU” button to display the “Main Menu” window. 2. Select “Partition-Format”. Press the “OK” button to enter the PartitionFormat menu. Move the cursor to highlight the desired HDD. 3. Press the “OK” button to format the partition. Partition-Format 0 0 0 1 / sda ? D o you w ant to format this partition? Ye s No Note: When playing the multimedia files, make sure the USB is connected to the STB. When “Movie” is selected, the STB can play the video files or the recorded files. When “Music”/”Photo” is selected, the STB can play the audio files or the photo files. The Disk Manager can play the recorded files only. 22 Timeshift Plugging an external Mass Storage Device to the USB port gives you access to Time Shift a broadcast programme. • Pause a broadcast programme and continue watching it later (Time Shift) • Record Time Shift • When the space available on the Mass Storage Device runs out, recording operation of broadcast will stop Timeshift Initiate: Time Shift can be done in viewing mode by pressing the “TIME SHIFT “ button. PAUSE-00:03:44 Trick Modes: During playback, it is possible to perform the following actions : • Press “PLAY/PAUSE “ button to play/pause the playback • Press “FORWARD “ button to fast forward the playback • Press “BACKWARD “ button to rewind the playback Stop the Time Shift: Press “EXIT” button to stop Time Shift. Then, a confirmation window appears. You are asked to save buffer or not: D o you w ant to save Select Yes to record Time Shift buffering buffer? Select No to viewing mode displaying the present Ye s No program ? 23 Troubleshooting In some regions, the digital terrestrial signal may be weak. Ensure you use a quality antenna to maximise reception. Problem Possible cause What to do Standby light not lit Mains lead unplugged Mains fuse blown Check mains lead Check fuse No signal found Aerial is disconnected Check aerial lead Aerial is damaged/ Check aerial misaligned Check with dealer Out of digital signal area No picture or sound Tuned to digital teletext channel Tune to another channel Scrambled channel message Channel is scrambled Select alternative channel No response to remote control Receiver off Handset not aimed correctly Front panel obstructed Hand set batteries exhausted Plug in and turn on plug Aim handset at front panel Check for obstructions Replace handset batteries Forgotten channel lock code Re-install channels to cancel channel lock 24 Forgotten menu lock code Contact help line The remote control will not operate your STB (1) The batteries in your remote control need replacing (2) There is an obstruction blocking the signal path between the remote control and the box. (1) Replace the batteries (2) Check that there is nothing in the way of the path between the remote control and the receiver After moving the STB to another room you find you are no longer able to receive digital reception The aerial feed former new point may come through a distribution system which may reduce the digital signal now received by the box. Try a direct feed from the antenna 25 Specifications Tuner & Channel • RF Input Connector x1 (IEC-TYPE, IEC169-2, Female) • RF Output Connector x1| (IEC-TYPE, IEC169-2, Male (Loop through) • Frequency Range: 174MHz~230MHz(VHF)&470MHz ~862MHz (UHF) • Signal Level: -15 ~ -70 dbm Decoder • Transport Stream MPEG-2 ISO/IEC 13818 • Profile Level MPEG-2 MAIN PROFILE @MAIN LEVEL • Input Rate MAX. 15Mbit/s • Video Formats AUTO, 4:3PS, 4:3LB, 16:9 SWITCHABLE • Audio Formats MPEG Layer I & II, 32 / 44.1 / 48KHz • Video Output RGB(DEFAULT) , CVBS 26 Connection • Main Power Cable Fixed Type • Tuner RF Input x1, RF Loop Through x1 • Scart TO TV x1, TO VCR x1 • Spdif Coaxial x1 • Data Port USB2.0 x1 Power Supply • Input Voltage AC220-240V ~ 50/60Hz • Power Consumption MAX. 5W Note: Design and Specifications are subject to change without notice. 27 [email protected] 28