Transcript
Note
Installation
A new hard drive needs to be initialized and partitioned before it will
1. Connect the power adapter to the Hard Drive Dock
appear in Windows Explorer or Mac Desktop.
2. Connect the USB 3.0 Cable to the Hard Drive Dock and attach the
Do not remove the hard drive while it is in use. Doing so may corrupt
other end to the computer
the data on the hard drive or cause damaged to the hardware.
3. Insert 2.5" or 3.5" SATA Hard Drive into the slot 4. Switch on the Hard Drive Dock and it is ready to use
Package Contents SD323
1Pcs
USB 3.0 Cable
1Pcs
DC Adapter
1Pcs
User Manual
1Pcs
Connect USB 3.0 Cable to Computer
Safely Disconnect
Warranty Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For our assistance with regards to warranty please email to
[email protected] or create a support ticket at http://www.simplecom.com.au
Windows Double-click on the Safely Remove icon in your Windows System Tray. This will launch the Safely Remove program. Then click on the device
SD323 USB 3.0 HDD Docking Station
you wish to remove and click on the Stop button. Mac In Mac OS the drive appears as an icon on the desktop. Before unplugging the drive, it needs to be dismounted by dragging the drive to the Trash Can, once the activity light has gone out, you can safely remove the drive.
System Requirement
Description
・ Available USB 3.0 for high speed data transfer
Simple to use. Lightning speed. Multi-compatible. A quality dock for
・ Reverse compatible with USB 1.1 & USB 2.0.
your 2.5" and 3.5" hard and solid state drives. SD323 supports the
・ Operating System: Windows 10/8/7/Vista/XP, Mac OS X, and Linux
direct insertion of 2.5" or 3.5" SATA Hard Drives. It is a caseless solution
Product
that makes swapping hard drives easier than ever before. Also, you can
Front
take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps.
LED Indicator
Features
On/Off Switch
・ Supports Standard Desktop 2.5"/3.5" SATA Hard Drives ・ On/Off power switch www.simplecom.com.au
・ LED light indicates Power and Activity status ・ Hot-swappable, plug and play, no driver software needed ・ Reverse compatible with USB 1.1 & USB 2.0 ・ Transfer Rates Up to 5 Gbps with USB 3.0 ・ Transfer Rates Up to 480 Mbps with USB 2.0 Secure Lock for 2.5" HDD
Interface
Specifications ・ Model: SD323 ・ Name: USB 3.0 HDD Docking Station
©2015 Simplecom Australia All Rights Reserved. Simplecom is a registered trademark of Simplecom Australia Pty Ltd. All other trademarks are property of their respective owner. Specifications and external appearance are subject to change without notice. Warranty and technical support covering this product are only valid in the country or region of purchase.
・ Interface: USB 3.0 ・ Dimensions: L 180mm, W 120mm, H 40mm ・ Weight: 372g ・ HDD Support: 2.5"/3.5" SATA Hard Drives or Solid State Drives
12V DC USB3.0
