Preview only show first 10 pages with watermark. For full document please download

Seat Adaptor Kit #88254 Installation Instructions

   EMBED

Share

Transcript

1-800-669-9690 SEAT ADAPTOR KIT #88254 INSTALLATION INSTRUCTIONS ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 3880-03 ROADMASTER, Inc. 6110 NE 127th Ave. Before Installation Vancouver, WA 98682 360-896-0407 fax 360-735-9300 Installation Complete www.roadmasterinc.com Parts List (2) 10mm x 1.25 x 40mm (2) 10mm lock washer (2) 10mm fender washer 3 Mounting Post  Seat Adaptor  Seat Adaptor Mounting Bolts, Fender and Lock Washers  1  2 4 Instructions 1. Locate the mounting post (Fig.1) that came with your BrakeMaster. If needed, order part number 450596. Now, secure the post to the center of the seat adaptor using the included 3/8" x ¾" bolt and 3/8" lock washer. If the hole is countersunk, use the Allen head bolt and lock washer included with this kit. 2. Now, die grind a small section of the front half of the bolt opening to allow clearance vfor the bolt once the seat adaptor is placed underneath the seat tracks. 3. Place the adaptor between the floor and the seat tracks, bolt into place using the supplied 10mm x 1.25 x 40mm bolts, fender washers and lock washers. 4. Tighten the rear seat bolts and replace the covers for the front and rear seat tracks. WARNING Failure to follow these instructions can result in property damage, personal injury or even death.