Preview only show first 10 pages with watermark. For full document please download

Seco-larm Enforcer Mve-wh010q Wireless Hdmi Extender Data Sheet ()

   EMBED

Share

Transcript

Wireless HDMI Extender MVE-WH010Q Range: Up to 98ft (30m) Features:  Wirelessly transmits HDMI from a DVR, Blu-Ray      player, or other high-definition source to a monitor Range: Up to 98ft (30m) Support resolutions up to 1080p Signal can pass through walls IR Pass-through carries remote control signals from the monitor’s location back to the source Two 5VDC adapters included Specifications: MVE-WH010Q Transmission frequency RF Communication system Modulation mode Frequency stability Bandwidth Transmission power Receiving sensitivity System latency Range IR Remote frequency Power supply Current draw Dimensions Weight Operating temperature Transmitter Receiver 5.1~5.9 GHz N/A MIMO N/A OFDM /- 4PPM 40MHz >12dBm >15dBm <-75dBm <-65dBm <1ms Up to 98ft N/A (30m) N/A 38kHz 5VDC 2A /- 10% 513/16” x 313/16” x 11/16” (148 x 97 x 18mm) 15.5-oz 15.4-oz (440g) (436g) 14 ~122 F (-10 ~50 C) Sample Application: Transmit up to 98ft (30m) HDMI cable IR Remote extension Transmitter Receiver HDTV Display Remote DVR or HD Source Included 5VDC Power adapter Included 5VDC Power adapter Active VGA and Audio Distributor over Cat5e/6 Component Video Balun over Cat5e/6 HDMI Cable Related Products: HDMI over Single Cat5e/6 HDMI over Dual Cat5e/6 16842 Millikan Ave  Irvine, CA 92606 Tel: 949-261-2999 / 800-662-0800  Fax: 949-261-7326 [email protected]  www.seco-larm.com Copyright 2012 © SECO-LARM U.S.A, Inc. All rights reserved. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints. pi-MVE-WH010Q.docx