Transcript
Second Generation Mobile Smart Repeater with Multiple Carrier transcievers
Data Sheet
MSRB2500
3G Wireless Signal Booster expands Voice and High Speed Packet coverage into “weak” signal areas This Smart Repeater expands mobile phone RF signal coverage into low signal-level areas. Mobile phone customers, when in buildings with high stone, concrete, stucco and metal wall content, experience poor wireless coverage. This Repeater starts with a Window Unit that is strategically placed to receive and send the highest possible RF signal from and to the nearest Mobile base station. It then uses unlicensed 5GHz spectrum to an indoor Coverage Unit. The Coverage Unit delivers RF to and from Mobile devices. This simple, powerful architecture allows your customers to deploy indoor coverage with no setup hassle. It’s completely plug and play. This repeater significantly boosts customers’ data speeds as well. The Window Unit displays 3G signal strength with the familiar “bars.” Your customers may use it or their mobile phones at different windows to select the optimal placement for the best possible RF reception. Once this is done, the MSRB2500’s Coverage Unit delivers the optimal reception to mobile devices.
Benefit to mobile operators
Reduced Churn - Fewer dropped calls and higher data rates promote customer retention. Higher Data Service Usage - Improved data rates in weak signal areas encourage its use. Decreased Capex - Lowers cost of indoor coverage and increases capacity of 3G Macro wireless networks. RF compatible with Macro Cells - Co-exists with macro network with real time automatic gain adjustment. Operator Specific - Integrated with the network through which the MSRB2500 was purchased. Decreased OpEx - Self selects correct frequency based upon PLMN code (UARFCN), eliminating provisioning effort. Significant increase in Network Capacity - Serves formerly low signal level clients. Self Adjusting - Automatically selects the correct frequency for use based on UARFCN and Operator PLMNID codes, thereby eliminating additional provisioning effort. Multi Carrier Support - Supports multiple carriers (up to three simultaneous, either contiguous or non-contiguous). Self Installs with Low Support Cost - “Zero option” automatic setup eliminates customer confusion.
WINDOW UNIT
COVERAGE UNIT
24 / 7
TECHNICAL S U P P O R T*
1-888-NETGEAR (638-4327) Email:
[email protected]
Second Generation Mobile Smart Repeater with Multiple Carrier transcievers
MSRB2500
Improved Voice Coverage - Allows subscribers to make crystal clear calls throughout homes up to 1,235 m2 (13,300 sq. ft).
Features for consumers
Improved Data Throughput - In weak signal areas, offers data throughput improvements often in excess of four fold. Extended Handset Battery Life – Enables lower handset transmit power and thereby extends battery life. Easy Installation – No external antennas, coaxial cables or complex settings. Truly plug and play. Automatically senses and adjusts to changes in the Mobile network or the presence of other MSRB2500s nearby.
• Specifications ––up to HSPA+ ––5 GHz link compliant with ETSI EN301 893 ––Up to 100dB path loss between units (approx 20 meters between WU and CU) ––Max EIRP: 10 dBm/carrier (max 3 carriers) downlink and 24dBm/carrier (max 3) uplink ––Up to 100 dB system gain ––Availability better than 99.9% • Performance ––Support of 6 simultaneous users at max uplink power (24 dBm) ––Typical improvement of more than +5dB in Ec/Io • Physical Dimensions ––Window Unit: (H x W x D) 220 x 142 x 142 mm (8.66 x 5.59 x 5.59 in) ––Coverage Unit: (H x W x D) 160 x 145 x 70 mm (6.29 x 5.70 x 2.75 in) (Each unit weighs less than .45kg)
350 E. Plumeria Drive San Jose, CA 95134-1911 1-888-NETGEAR (638-4327) E-mail:
[email protected] www.NETGEAR.com
• Environment ––Operating temperature: 0° to 40°C ––Storage temperature: -25° to 60°C ––Relative humidity: 5 to 95%, non-condensing ––Operating altitude: -60m to 3,050m ––Storage altitude: 12,000m ––RoHS (2002/95/EC) six of six compliant ––WEEE (2002/96/EC) compliant • 3GPP Compliance ––3GPP TS 25.143 R.8 • Safety ––EN60950-1:2000 ––EN50385:2002 ––EN50392:2004 • Security & Network Safety ––Securely provisioned operation with ciphered software specific to Operator’s network ––Uplink system gain never exceeds path loss for low noise base station operation ––Uplink muting when no active user equipment is detected ––Shuts down upon Operator’s network command or failure detection ––Maintains end-to-end encryption ––Coexistence with adjacent 5GHz systems including 802.11a/n
• Certifications ––WEE ––CB ––CE • EMC/EMI/Immunity ––EN55022 Class B ––EN61000-3-2, 3 ––EN61000-4-2~6,11 ––EN 301 489 -1,17, 23 ––EN 301 893 ––EN 301 908-11-1, 2 • Power ––+12VDC via external supply (2 included) ––External supply: 100 to 240 VAC, 47 – 63 Hz. ––Power consumption less than 15W per unit • Product Family Summary ––MSRB2500: 1 band 2 carrier ––MSRB2510: 1 band 3 carrier ––MSRB2520: 2 band 2 carrier ––MSRB2530: 2 band 3 carrier
© 2011 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, are trademarks and/or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved. This product is packaged with a limited warranty, the acceptance of which is a condition of sale. * Basic technical support provided for 90 days from date of purchase.
DS-MSRB2500-0
