Transcript
SECTION
A
Acenti Collection Premium Grade
INDEX Acenti® Collection Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A2 Acenti Lighting Controls Dimmers and Fan Speed Control . . . . . . . . . . . . . .A3 Acenti Switches 15A and 20A Switches . . . . . . . . . . . . . . . . . . . . . .A4 Electronic Timer Switch . . . . . . . . . . . . . . . . . . . . .A4 Manual-ON Occupancy Sensor . . . . . . . . . . . . . . .A4 Acenti Receptacles Triplex and Duplex . . . . . . . . . . . . . . . . . . . . . . . . .A5 Sixplex and Duplex Surge Protective Receptacles . .A5 Acenti Wallplates and QuickPort® Connectors Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A6 QuickPort Snap-In Connectors . . . . . . . . . . . . . . . .A7 QuickPort Wallplate Inserts . . . . . . . . . . . . . . . . . .A7
Acenti Collection Index Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI COLLECTION FEATURES Premium Grade Lighting Controls and Devices THE ACENTI COLLECTION OFFERS A FULL PORTFOLIO OF TECHNICALLY AND AESTHETICALLY SUPERIOR DEVICES FOR RESIDENTIAL APPLICATIONS. Acenti lighting controls and switches respond alike; their push pads remain permanently graded. No line breaks or irregular shadow patterns detract from their pleasing, symmetrical appearance. The Collection includes the industry’s first triplex receptacle, duplex and sixplex surge protective receptacles, GFCIs, screwless snap-on wallplates, and QuickPort® multimedia inserts and snap-in connectors.
Acenti Lighting Controls Lighting and fan speed controls feature a patent-pending return to neutral push pad, multi-location control with either matching or coordinating remotes, soothing blue LEDs and Acenti’s unique surface alignment system. Clear housing for visual confirmation of termination
Multifunction clips for fastening to wallplate Back- and sidewiring screw terminals
Microcontroller with onboard non-volatile memory
Air-gap switch eases service
Acenti Collection
LED brightness display
Robust MOV for superior surge protection Dim/bright bar
Built-in radio/TV interference filter
Features and Benefits
Return-to-neutral push pad
High-grade triac for superior reliability
I
Efficient construction with consistent form factor, excellent ergonomic traits and precision feel I Innovative contoured geometry* offers an exclusive aesthetic design I Clean multi-gang installation with no dividers between devices I Devices and wallplates molded from engineering-grade polymer with subtle matte finish and flawless color match
Locator LED ACI06-1LW
I
Screwless wallplates snap onto device’s TOX®-fastened multifunction clips I Brushed and polished metal finish wallplates available to coordinate with premium grade appliances I Meet all applicable UL, CSA, NOM and FCC requirements I Backed by a Five-Year Limited Warranty * U. S. and Foreign Patents Pending. TOX® is a registered trademark of TOX PRESSOTECHNIK, LLC.
ACENTI BY LEVITON…DOWN TO THE LAST DETAIL
A
Switches Return-to-neutral push pad with blue LED locator. 15A electronic (single-pole or multi-location) and 20A electromechanical models (120 & 277V in SP, 3W, 4W). ACS15-1LW shown
Triplex & Duplex Receptacles Exclusive space-saving Triplex Receptacle in NEMA 5-15R and 5-20R configurations. Duplex models also available. AC315-W shown
GFCI, Sixplex & Duplex Surge Protective Receptacles GFCIs feature lockout action for added safety. Exclusive Sixplex Surge Receptacle saves space and helps protect sensitive electronic equipment. ACSR6-W shown
Wallplates Screwless snap-on design provides smooth, clean look exclusively for all Acenti devices. Brushed stainless steel versions available. ACWP1-W shown
learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 2Courtesy of Steven Engineering,To Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI LIGHTING CONTROLS • 400–1000 WATTS • 120V AC 60Hz Premium Grade Lighting Controls Acenti Lighting Controls All Acenti lighting controls provide single-pole (one location) and 3-way (multi-location) control when used with Remote unit.
Acenti Controls with LED Locator and Brightness Display 120V AC 60Hz Only U R
ACE06-1L
600W
W, Q, A, S, D, C, G, E
ACX10-1L
1000VA
W, Q, A, S, D, C, G, E
ACH08-1L
8 Amps
W, Q, A, S, D, C, G, E
1.75 (44.5)
ACF01-1L
1.5 Amps
W, Q, A, S, D, C, G, E
ACI06-1LW
AC00R-1L
No load rating
W, Q, A, S, D, C, G, E
AC00R-10
No load rating
W, Q, A, S, D, C, G, E
2.71 (68.8)
COLOR* W, Q, A, S, D, C, G, E W, Q, A, S, D, C, G, E W, Q, A, S, D, C, G, E
ACE04-1L
RATING 600W 600VA (450W) 1000W/ 1000VA (800W) 400W
4.79 (121.7)
CAT. NO. ACI06-1L ACM06-1L ACM10-1L
3.28 (83.3)
DESCRIPTION Acenti Incandescent Dimmer Acenti Magnetic Low-Voltage Dimmer Acenti Incandescent/ Magnetic Low-Voltage Dimmer Acenti Electronic Low-Voltage Dimmer; Neutral required Acenti Electronic Low-Voltage Dimmer; Neutral required Acenti Advance Mark 10™ Powerline or Tu-Wire™ Fluorescent Dimmer; Neutral required Acenti Hi-lume® or Eco-10™ (Eco-Series) Fluorescent Dimmer; Neutral required Acenti Quiet Fan Speed Control (LED Display denotes speed); Neutral required Matching Remote Unit to 120V Dimmers/Fan Speed Control for 3-Way or up to 5 locations; Neutral required Coordinating Remote Unit to 120V Dimmers/Fan Speed Control for 3-Way or up to 10 locations, no LED; Neutral required†
W, Q, A, S, D, C, G, E
1.40 (35.6)
2.71 (68.8)
3.28 (83.3)
Acenti Colors
Alabaster (-W) Quartz (-Q) Natural (-A) Sand (-S) Driftwood (-D) Cocoa (-C) Slate (-G) Note: Wallplates are also available in Brushed Stainless Steel, Polished Chrome and 24K Gold finishes. Custom premium colors available.
Onyx (-E)
1.75 (44.5)
1.37 (34.8)
ACE06-1LW
Acenti Collection
CAUTION ON RETROFITS: When retrofitting Mark 10™ Powerline dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton dimmer.
4.79 (121.7)
† Except when used with incandescent or magnetic low-voltage dimmers.
Maximum Load per Acenti Device CAT. NO. ACE04-1L ACE06-1L ACF01-1L ACH08-1L ACI06-1L ACM06-1L ACM10-1L ACX10-1L
SINGLE 400W 600W 1.5A 8A 600W 600VA (450W) 1000W/ 1000VA (800W) 1000VA
SPECIFICATIONS AND FEATURES • Universal design provides crisp actuation with minimal travel • Push pad always returns to neutral position regardless of load status • Minimum brightness can be adjusted to comfortable level • Dim-lock feature allows lights to turn on to a user-configured level every time • Soothing blue LED Locator for easy location in the dark • Subtle blue LED brightness level display • Digital circuitry provides eye-pleasing soft-ON/fade-OFF and extended lamp life; fade rates are selectable
2-GANG 350W 500W 1.5A 8A 600W 600VA (450W) 800W/ 800VA (640W) 800VA
MORE THAN 2-GANG 250W 400W 1.5A 8A 500W 500VA (375W) 650W/ 650VA (520W) 650VA
• Protected memory and voltage compensation maintain light levels after power outages • Single-pole (one-location) and 3-way (multilocation) switching with Acenti Remote Units • Built-in radio/TV interference filter • Terminal screws (back- and side-wire) on select models ease installation • Multifunction self-grounding clip snaps onto wallplate and ensures proper device alignment • Screwless, snap-on wallplates in matching and coordinating colors TESTING AND CODE COMPLIANCE • UL Listed (File #E-31373) • CSA Certified (File #LR-3413)
Use Leviton Power Extenders to extend the load capacity of box-mounted dimmers. Leviton Power Extenders are available for incandescent, magnetic low-voltage, electronic low-voltage, Advance Mark 10™ Powerline fluorescent dimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such as Advance Mark 7™, OSRAM Sylvania Quicktronic Helios or equivalent ballasts. See Section C for more information.
• NOM Certified (#057) • Meets FCC Part 15 • Backed by a Limited Five-Year Warranty *COLOR For color selection, add suffix to catalog number as follows: Alabaster (-W), Quartz (-Q), Natural (-A), Sand (-S), Driftwood (-D), Cocoa (-C), Slate (-G), Onyx (-E). MATERIAL CHARACTERISTICS Environmental: Flammability UL-94, V2 Rating Operating Temperature: 32°F to 130°F
A For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
3
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI SWITCHES AND ADAPTIVE DEVICES • 120 AND 277V AC Premium Grade Switches and Adaptive Devices Acenti Switches
1.75 (44.5)
1.40 (35.6)
Acenti Switches 277V AC
RATING 15 Amp
COLOR* W, Q, A, S, D, C, G, E
No load rating AC0SR-10 No load rating AC201-1L 20 Amp
W, Q, A, S, D, C, G, E
AC203-1L
20 Amp
W, Q, A, S, D, C, G, E
AC204-1L
20 Amp
W, Q, A, S, D, C, G, E
CAT. NO. AC201-7L
RATING 20 Amp
COLOR* W, Q, A, S, D, C, G, E
AC203-7L
20 Amp
W, Q, A, S, D, C, G, E
AC204-7L
20 Amp
W, Q, A, S, D, C, G, E
AC0SR-1L
W, Q, A, S, D, C, G, E W, Q, A, S, D, C, G, E
UR
DESCRIPTION Acenti 20-Amp Non-Dimming Electromechanical Switch for Single-Pole Applications, with LED Locator Acenti 20-Amp Non-Dimming Electromechanical Switch for 3-Way Applications, with LED Locator Acenti 20-Amp Non-Dimming Electromechanical Switch for 4-Way Applications, with LED Locator 2.71 (68.8)
Acenti Electronic Timer Switch 120V AC 60Hz Only U R DESCRIPTION Acenti Timer Switch with Four Preset Buttons and OFF, LED Locator; Neutral required. 3-Wire, Single-Pole, 1000W Incandescent, 20A Inductive, 1 HP @ 120V
CAT. NO. ACT60-L
INTERVAL 10-2030-60 Minutes
COLOR* W, A
Acenti Manual-ON Occupancy Sensor 120V AC 60Hz Only U R 1.75 (44.5)
DESCRIPTION CAT. NO. Manual-ON Occupancy Sensor, CEC Title 24 Compliant, ACP15-CB Single-Pole, 3-Way or more when used with ACP0R Remote or Acenti Switch Remotes AC0SR-1L and AC0SR-10; Neutral required. With LED locator, 180° field of view, 900 sq. ft. coverage. Manual-ON Occupancy Sensor Remote Unit, 3-Way or ACP0R-CB more when used with ACP15 Occupancy Sensor or any Acenti Dimmer; Neutral required. With LED locator, 180° field of view, 900 sq. ft. coverage.
1.40 (35.6)
AC201-1LW
2.60 (66.1)
3.28 (83.3)
4.79 (121.7)
SPECIFICATIONS AND FEATURES
1.75 (44.5)
ACP15-CBW
A
CAT. NO. ACS15-1L
Acenti Adapted Devices 2.38 (83.3)
4.79 (121.7)
ACS15-1LW
Acenti Collection
UR
DESCRIPTION Acenti 15-Amp Non-Dimming Electronic Switch for Single-Pole, 3-Way or More Applications, with LED Locator; Neutral required Matching Remote Unit to ACS15-1L Switch for 3-Way or up to 5 locations, with LED Locator; Neutral required Coordinating Remote Unit to ACS15-1L Switch for 3-Way or up to 10 locations, no LED; Neutral required Acenti 20-Amp Non-Dimming Electromechanical Switch for Single-Pole and Motor Loads, with LED Locator Acenti 20-Amp Non-Dimming Electromechanical Switch for 3-Way Applications, with LED Locator Acenti 20-Amp Non-Dimming Electromechanical Switch for 4-Way Applications, with LED Locator
2.71 (68.8)
3.28 (83.3)
4.79 (121.7)
Acenti Switches 120V AC
1.35 (34.3)
Acenti Switches • Universal design provides crisp actuation with minimal travel • Push pad always returns to neutral position regardless of load status • Soothing blue Locator LED for easy location in the dark • ACS15-1L provides single-pole (one-location) and multilocation switching with Acenti Remote Units • Terminal screws (back- and side-wire) ease installation • Multifunction self-grounding clip snaps onto wallplate and ensures proper device alignment • Screwless, snap-on wallplates in matching and coordinating colors Acenti Electronic Timer Switch • Four preset buttons plus OFF for timed control of lights and appliances • LEDs indicate time elapsed and last LED flashes two-minutes-until-OFF warning Acenti Occupancy Sensor • Manual-ON/Automatic OFF operation in accordance with California Title 24 2005 requirements • ACP15 provides true 3-way control when used with ACP0R Remote – ideal for L-shaped room or any large rooms • ACP15 can be used with Acenti Switch Remotes for true 3-way control where a single sensor provides
RATING Incandescent: 1800VA, Fluorescent: 1800W at 120V AC. Motor: 1⁄2 HP @ 120V AC No load rating
COLOR* W, A, E
W, A, E
complete room coverage – ideal for rooms with more than one entrance • ACP0R Remote can be used with any Acenti dimmer for true 3-way control with combined occupancy sensor/ dimmer functionality – ideal for Jack and Jill bathrooms TESTING AND CODE COMPLIANCE Switches: • UL Listed (File #E-7458) • CSA Certified (File #LR-152105) • Meets NEMA WD-1 & WD-6 requirements Timer: • UL Listed (File #E-66800) • CSA Certified (File #LR-68679) Occupancy Sensor: • UL Listed (File #E-118904) • CSA Certified (File #LR-152105) • Conforms to California Title 24 Energy code and FCC regulations All Devices: • NOM Certified (#057) • Backed by a Limited Five-Year Warranty *COLOR For color selection, add suffix to catalog number as follows: Alabaster (-W), Quartz (-Q), Natural (-A), Sand (-S), Driftwood (-D), Cocoa (-C), Slate (-G), Onyx (-E). MATERIAL CHARACTERISTICS Environmental: Flammability UL-94, V2 Rating Operating Temperature: 32°F to 130°F
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 4Courtesy of Steven Engineering,To learn Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI RECEPTACLES • 15 AMP 125V • 20 AMP 125V Premium Grade Receptacles Acenti Receptacles
Acenti Triplex and Duplex Receptacles 125V U R
G
5-15R
Acenti Triplex Receptacle Acenti Duplex Receptacle
5-20R
W
AC315 W, Q, A, S, D, C, G, E AC215 W, Q, A, S, D, C, G, E
G W
AC320 W, Q, A, S, D, C, G, E AC220 W, Q, A, S, D, C, G, E
2.77 (70.4)
CAT. NO./COLOR* 20A/125V 4.79 (121.7)
CAT. NO./COLOR* 15A/125V
3.28 (83.3)
DESCRIPTION
Acenti GFCI, Sixplex and Duplex Surge Protective Receptacles 125V U R CAT. NO./COLOR* 20A/125V
Acenti GFCI Receptacle, 20A/125V Feed-Through Acenti Sixplex Surge Protective Receptacle, 2-Gang with 6" Leads, Indicator Light and Audible Alarm Acenti Duplex Surge Protective Receptacle with Indicator Light and Audible Alarm
5-20R
W
AC315-W
1.26 (31.9)
G W
ACGF1 W, Q, A, S, D, C, G, E ACSR6 W, Q, A, S, D, C, G, E
ACGF2 W, Q, A, S, D, C, G, E —
ACSSR W, Q, A, S, D, C, G, E
—
2.77 (70.4)
G
5-15R
1.80 (45.7)
4.79 (121.7)
CAT. NO./COLOR* 15A/125V
3.28 (83.3)
DESCRIPTION
AC215-W
Acenti Collection
1.80 (45.7)
0.86 (21.9)
3.35 (85.0)
2.77 (70.4)
Surge Protective Receptacles • Exclusive space-saving Sixplex Surge Protective Receptacle provides six outlets • Protect sensitive electronic equipment against transient voltage surges • UL 1449 clamping level: 400V • Audible alarm for protection status • Soothing blue LED Monitor/Indicator
3.61 (91.7)
ACSR6-W
2.70 (168.6)
• UL Listed (Triplex/Duplex/Surge: File #E-13399, GFCI: File #E-48380) • CSA Certified (Triplex/Duplex: File #LR-152105, GFCI: File #LR-57811, Surge: File #MC152105/LR-406) • NOM Certified (#057) • Meets NEMA WD-1 & WD-6 requirements • Backed by a Limited Five-Year Warranty
4.79 (212.7)
TESTING AND CODE COMPLIANCE
3.28 (83.3)
SPECIFICATIONS AND FEATURES All Triplex and Duplex Receptacles • Fit into a standard size wallbox • Exclusive space-saving Triplex Receptacle accommodates 3 NEMA grounding plugs • Neat multi-gang installation with no dividers between devices • Terminal screws (back and side wire) available for easier installation • Multifunction self-grounding clip snaps onto wallplate and ensures proper device alignment • Subtle, matte finish complements fine décors • Molded from engineering-grade polymer for uniformity and flawless color match • Screwless, snap-on wallplates in matching and coordinating colors GFCI Receptacles • Patented bridge contact provides individual set of contacts for GFCI receptacle face and downstream receptacles • Patented, advanced technology “dead-face” safety feature: no power to receptacle face if improperly wired (line-load reversal) • Lockout feature for added safety • Matching TEST and RESET buttons
1.26 (31.9)
3.28 (83.3)
4.79 (121.7)
1.81 (46.0)
*COLOR For color selection, add suffix to catalog number as follows: Alabaster (-W), Quartz (-Q), Natural (-A), Sand (-S), Driftwood (-D), Cocoa (-C), Slate (-G), Onyx (-E). MATERIAL CHARACTERISTICS Environmental: Flammability UL-94, V2 Rating Operating Temperature: 32°F to 130°F
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
1.80 (45.7)
ACGF1-W
1.24 (31.5)
A 5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI WALLPLATES Premium Grade Wallplates Acenti Screwless Snap-On Wallplates
4.92 (124.9)
0.30 (7.6)
3.28 (83.4)
DESCRIPTION
COLOR*
ENGINEERING GRADE POLYMER CAT. NO. ACWP1
BRUSHED STAINLESS STEEL CAT. NO.** ACWM1-STS
POLISHED CHROME CAT. NO.**
24K GOLD CAT. NO.**
1-Gang 1 Acenti
W, Q, A, S, D, C, G, E
ACWM1-PCH
ACWM1-24K
2-Gang 2 Acenti
W, Q, A, S, D, C, G, E
ACWP2
ACWM2-STS
ACWM2-PCH
ACWM2-24K
3-Gang 3 Acenti
W, Q, A, S, D, C, G, E
ACWP3
ACWM3-STS
ACWM3-PCH
ACWM3-24K
4-Gang 4 Acenti
W, Q, A, S, D, C, G, E
ACWP4
ACWM4-STS
ACWM4-PCH
ACWM4-24K
5-Gang 5 Acenti
W, Q, A, S, D, C, G, E
ACWP5
ACWM5-STS
ACWM5-PCH
ACWM5-24K
6-Gang 6 Acenti
W, Q, A, S, D, C, G, E
ACWP6
ACWM6-STS
ACWM6-PCH
ACWM6-24K
Blank Wallplate Insert
W, Q, A, S, D, C, G, E
ACW14
—
—
—
Acenti Collection
ACWPI-W
ACWM1-STS
ACWM1-PCH
SPECIFICATIONS AND FEATURES
ACWM1-24K
A
• Exclusively for all Acenti devices • Screwless snap-on design provides smooth, clean look • Subtle, matte finish complements fine décor • Available in engineering-grade polymer, brushed stainless steel, polished chrome and 24k Gold metal finishes • Unique, screwless metal finish wallplates coordinate with premium-grade appliances • Single-opening design of multi-gang wallplates means device frames rest side by side, without extra webbing between them to disrupt clean appearance • Alignment plate with positioning pins ensures alignment of device and wallplate • Snaps easily and directly onto device’s multifunction, Tox®†-fastened clips, which also provides self-grounding of device and metal wallplate (when used with a properly grounded metal wallbox) • Custom premium colors and QuickPort® jack inserts available
TESTING AND CODE COMPLIANCE • UL Listed and CSA Certified • NOM Certified (#057) • Meet NEMA Standards WD-1, WD-6 (plastic); Meet NEMA and ANSI standards (metal) • Backed by a Limited Five-Year Warranty *COLOR For color selection, add suffix to catalog number as follows: Alabaster (-W), Quartz (-Q), Natural (-A), Sand (-S), Driftwood (-D), Cocoa (-C), Slate (-G), Onyx (-E). **STS denotes Stainless Steel, PCH denotes Polished Chrome and 24K denotes 24k Gold finishes. †TOX® is a registered trademark of TOX PRESSOTECHNIK, LLC.
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 6Courtesy of Steven Engineering,To learn Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ACENTI® QUICKPORT® MULTIMEDIA CONNECTORS AND INSERTS Premium Grade Multimedia Connectors and Inserts Acenti® QuickPort Snap-In Connectors and Wallplate Inserts Acenti QuickPort® Snap-In Connectors CAT. NO. AC108-R*5 AC830-B*R AC830-B*E AC830-B*Y AC735-RO* AC735-RR* AC735-RW* AC735-RY* AC837-B*R AC837-B*E AC833-B*R AC833-B*E AC084-B*F AC832-0B* AC084-F*F AC831-0B* AC084-B*B AC734-SV*
4.80 (121.9)
DESCRIPTION Cat 5e Jack RCA Jack w/Red Stripe RCA Jack w/Black Stripe RCA Jack w/Yellow Stripe RCA 110 Termination, Orange Barrel RCA 110 Termination, Red Barrel RCA 110 Termination, White Barrel RCA 110 Termination, Yellow Barrel Banana Jack w/Red Stripe Banana Jack w/Black Stripe Binding Post w/Red Stripe Binding Post w/Black Stripe BNC Adapter, Nickel-Plated BNC Adapter, Gold-Plated F-Type Adapter, Nickel-Plated F-Type Adapter, Gold-Plated Blank Insert S-Video Module, 110 Termination
1.80 (45.7)
AC644-W
DESCRIPTION 2-Port QuickPort Insert 3-Port QuickPort Insert 4-Port QuickPort Insert 6-Port QuickPort Insert
Alabaster (-W)
Quartz (-Q)
CAT. NO. AC642 AC643 AC644 AC646
Natural (-A)
Sand (-S)
SPECIFICATIONS AND FEATURES • Complements complete line of premium grade Acenti devices • Provides voice, data, audio and video • Compatible with the complete collection of Acenti screwless, snap-on wallplates TESTING AND CODE COMPLIANCE
Driftwood (-D)
Acenti Collection
Acenti QuickPort® Multimedia Wallplate Inserts COLOR* W, Q, A, S, D, C, G, E W, Q, A, S, D, C, G, E W, Q, A, S, D, C, G, E W, Q, A, S, D, C, G, E
Cocoa (-C)
Slate (-G)
Onyx (-E)
*COLOR When ordering Acenti QuickPort Snap-In Connectors, insert color description where (*) is indicated. Alabaster (W), Quartz (Q), Natural (A), Sand (S), Driftwood (D), Cocoa (C), Slate (G) and Onyx (E). When ordering Acenti QuickPort Wallplate Inserts, add suffix to catalog number as follows: Alabaster (-W), Quartz (-Q), Natural (-A), Sand (-S), Driftwood (-D), Cocoa (-C), Slate (-G) and Onyx (E).
QuickPort Wallplate Inserts • UL Listed and CSA Certified • Meets NEMA Standards WD-1, WD-6 QuickPort Snap-In Connectors and Wallplate Inserts • Backed by a Limited Five-Year Warranty
A For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
7
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
HOW TO USE THIS CATALOG The L-101 Leviton Wiring Device Catalog is designed to help you find the device you’re seeking in the quickest and easiest way possible. Most product sections are divided into three distinct categories in the following sequence—Industrial Grade, Commercial Grade and Residential Grade—and grouped according to amperage and voltage, lowest to highest. For example, if you need to order 15 Amp, 125 Volt Industrial Grade straight-blade duplex receptacles, begin your search with the main Table of Contents at the front of the book. Here you’ll see that all straight blade receptacles are listed in Section G. Turn to Section G for a more detailed Table of Contents on the first page. Each section page contains product descriptions, ratings and catalog numbers. There are also helpful highlights including Specifications and Features, Testing and Code Compliance, Color listing, Material Characteristics and dimensioned color product photos. Any product page in the L-101 Catalog can be clearly copied or faxed to customers and prospects for use as a specifier sheet or as part of a presentation. The Quick Reference Guide follows the main Table of Contents to help you pinpoint and locate specific products. Technical Section V provides general product and test data, industry standards, NEMA configuration charts, a glossary of wiring device terms, ANSI architectural symbols and other related information. Specific catalog numbers are listed in the exhaustive index at the back of the catalog.
A B D C G
E
F
H
I K
L J
A RATING
E CATALOG NUMBER
I SPECIFICATIONS & FEATURES
B Choose GRADE, if appropriate
F DESCRIPTION
J TESTING AND CODE COMPLIANCE
C DIMENSIONED PHOTOGRAPH
G Check for NEMA CONFIGURATION
K COLOR LISTING
D WIRING/CERTIFICATIONS
H WALLPLATE REFERENCE, if appropriate
L MATERIAL CHARACTERISTICS
A 8 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
