Transcript
SECTION
S
Lampholders INDEX
Lampholders Index
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S2 Incandescent Lampholders Outlet Box, Keyless and Pull Chain . . . . . . . .S3, S4 Metal Shell and Interiors . . . . . . . . . . . . . . . . . . .S5 Phenolic Cap and Shell . . . . . . . . . . . . . . . . . . . .S5 Multi-Lampholder Clusters . . . . . . . . . . . . . . . . .S6 Porcelain Par Connectors . . . . . . . . . . . . . . . . . .S6 Bayonet Socket–Single Contact . . . . . . . . . . . . . .S6 Porcelain Mogul Base . . . . . . . . . . . . . . . . . . . .S7 Socket Extensions . . . . . . . . . . . . . . . . . . . . . . . .S8 Appliance Heating Receptacle . . . . . . . . . . . . . .S8 Porcelain and Phenolic . . . . . . . . . . . . . . . . . . . .S8 Porcelain Snap-In . . . . . . . . . . . . . . . . . . . . . . . .S9 Porcelain Keyless–Commercial Units . . . . . . . . . .S9 Porcelain Keyless Fixture Single Circuit-Medium Base . . . . . . . . . . . . . . . .S9 Porcelain Keyless Medium Base– Side Angle Mounted . . . . . . . . . . . . . . . . . . . . .S10 Phenolic Keyless Fixture–Medium Base . . . . . .S10 Lampholders for Recessed Single Contact Lamps . . . . . . . . . . . . . . . . . . . . . . . . .S10 Lampholders for Metal Halide and Quartz Halogen Lamps . . . . . . . . . . . . . . . . . . .S10 Candle Sockets . . . . . . . . . . . . . . . . . . . .S10–S12 Fluorescent Lampholders Compact Fluorescent Ceiling Lampholder . . . . . .S4 Linear Fluorescent . . . . . . . . . . . . . . . . . .S13–S17 Medium Bi-Pin . . . . . . . . . . . . . . . . . . .S13–S15 High Output . . . . . . . . . . . . . . . . . . . . .S13, S14 Slimline . . . . . . . . . . . . . . . . . . . . . . . . .S13, S14 Miniature . . . . . . . . . . . . . . . . . . . . . . . . . . .S16 T-8 to T-5 Adapter . . . . . . . . . . . . . . . . . . . . .S16 4-Pin Long Twin Tube with 2G11 Base . . . . . . .S17 Lamp Support Clips for Long Twin Tube . . . . . . .S18 Compact Fluorescent Lampholders (CFL’s) . . . . . . . . . . . . . . . . .S19–S22 For a complete listing of OEM products, see the OEM-100 Catalog.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
LAMPHOLDERS
A VARIETY OF INCANDESCENT AND FLUORESCENT STYLES IN A RANGE OF RATINGS AND MATERIALS Leviton offers a complete selection of outlet box, incandescent, fluorescent and specialty lampholders, in various ratings and materials. The following pages offer a variety of types and styles. OUTLET BOX LAMPHOLDER Available in keyless, pull chain and outlet models, all featuring easy twist-lock mounting. Cat. No. 8827-CW4 shown
PORCELAIN MEDIUM BASE LAMPHOLDER With a choice of mounting and wiring options, these lampholders are ideal for a wide range of commercial and residential incandescent fixtures. Cat. No. 8101 shown
Lampholders
LONG TWIN-TUBE 2G11 BASE LAMPHOLDERS Choice of mounting and wiring options to reduce fixture assembly time. Cat. No. 13453 shown
FLUORESCENT LAMPHOLDER FOR MEDIUM BI-PIN LAMPS Features Lamp-Lock design for quick relamping. Models dedicated for energy-efficient T-8 lamps available.
CANDELABRA BASE LAMPHOLDER Keyless lampholders for chandeliers and other fixtures, featuring various hickeys or double snap-in spring clips.
Cat. No. 13653-WP shown
Cat. No. 10014-800 shown
COMPACT FLUORESCENT LAMPHOLDERS Available for all popular 2-pin and 4-pin lamp bases, with a variety of mounting options. Color-coded for easy wattage identification.
S
Cat. No. 26725-426 shown
PORCELAIN MOGUL BASE LAMPHOLDER A complete selection of highquality porcelain moguls with leads or screw terminals. Pulse-rated models available. Cat. No. 8756 shown
METAL SHELL LAMPHOLDER Medium base, electrolier lampholders available in a variety of attractive finishes. Cat. No. 9346-PG shown
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 2Courtesy of Steven Engineering,To learn Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 250V Medium Base Incandescent Lampholders Outlet Box Lampholders
Ø 4.56 (115.9)
DESCRIPTION/ TERMINALS 2 Terminal Screws 6" Pigtail Leads 4 Terminal Screws
WHITE UREA CAT. NO. 8829-CW1 8829-CW2 8829-CW4
OD
FITS BOX SIZE
41⁄ 2" 41⁄ 2" 41⁄ 2"
31⁄ 4" or 4" 31⁄ 4" or 4" 31⁄ 4" or 4"
2.01 (50.9)
660 WATT 600V One-Piece Keyless Top Wired U R
660 WATT 250V One-Piece Pull Chain Top Wired U R DESCRIPTION/ TERMINALS 2 Terminal Screws 6" Pigtail Leads 2 Terminal Screws with Captive Clamps
WHITE UREA CAT. NO. 8827-CW1 8827-CW2 8827-CW4
OD
FITS BOX SIZE
41⁄ 2" 41⁄ 2" 41⁄ 2"
31⁄ 4" or 4" 31⁄ 4" or 4" 31⁄ 4" or 4"
Ø 1.33 (33.9)
8827-CW2
660 WATT 250V One-Piece Keyless Top Wired U R OD
FITS BOX SIZE
33⁄ 4" 41⁄ 2" 41⁄ 2" 41⁄ 2" 41⁄ 2"
31⁄ 4" 31⁄ 4" or 4" 31⁄ 4" or 4" 31⁄ 4" or 4" 31⁄ 4" or 4"
Ø 4.50 (114.3)
660 WATT 250V One-Piece Pull Chain Top Wired U R PORCELAIN CAT. NO. 29816-C 29816-C2 49816-C
OD
FITS BOX SIZE
41⁄ 2" 41⁄ 2" 41⁄ 2"
31⁄ 4" or 4" 31⁄ 4" or 4" 31⁄ 4" or 4"
Ø 1.63 (41.3)
9875-2
Ø 4.50 (115.3)
29816-CM*
2.01 (50.9)
DESCRIPTION/ TERMINALS 2 Screws 6" Pigtail Leads 2 Screws w/Captive Clamps for 4-Wire Terminals Interior Mechanism for 2-Piece Outlet Box Lampholders#
*When existing stock is depleted, this item will be DISCONTINUED. CSA Certified except where indicated by#
Ø 1.74 (44.2)
Incandescent Lampholders
2 Screws, no cage lip 6" Pigtail Leads, no cage lip 4 Screws 4 Quickwire Push-In#
PORCELAIN CAT. NO. 9874 9875 9875-2 49875 9883
1.52 (38.5)
DESCRIPTION/ TERMINALS 2 Screws#
29816-C SPECIFICATIONS AND FEATURES • Twist-lock mounting • Pull chain models have bell at end of chain on 3 foot cord • Medium base TESTING AND CODE COMPLIANCE • UL Listed (File #E-3810) • CSA Certified (File #LR-1863)
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
3
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 125V — 15 AMP-125V • 120W 250V Medium Base Incandescent and GU24 Base Fluorescent Lampholders Ø 4.56 (115.9)
Outlet Box Lampholders 660 WATT 125V Lampholder Outlet 15 AMP-125V One-Piece Pull Chain Side Wired U
2.50 (63.5)
DESCRIPTION/ TERMINALS 2 Screws#
PORCELAIN
OD
FITS BOX SIZE
9716-C
41⁄ 2"
31⁄ 4" or 4"
NEMA CONFIG.
1-15R
W
660 WATT 125V Lampholder Outlet 15 AMP-125V One-Piece Pull Chain Top Wired U R DESCRIPTION/ TERMINALS 2 Screws
PORCELAIN
OD
FITS BOX SIZE
9726-C
41⁄ 2"
31⁄ 4" or 4"
NEMA CONFIG. G
5-15R
W
9716-C
DESCRIPTION No. 6 Chain; 1⁄ 8" Dia. Balls
BRASS FINISH 18302-1
NICKEL FINISH 18302-1N
Connector for No. 6 Chain
9820
9820-N
Chain, 3 feet long, End Bell and Connector; use as extension or replacement; 1⁄ 25" Dia. Balls
6
6-N
Ø 4.56 (115.9)
18302-1N 2.50 (63.5)
Incandescent and Fluorescent Lampholders
Ball and Chain Accessories
9820
6
DESCRIPTION Insulating Link; Thermoplastic 13⁄ 4" Total Length
BROWN 9839
WHITE 9839-I
9726-C
9839-I CSA Certified except where indicated by#
GU24 Base Fluorescent Lampholder Energy-Saving Keyless Bi-Pin Compact Fluorescent Ceiling Lampholder for Closets and Closed Spaces 120 WATT 250V AC DESCRIPTION Lampholder with pigtail leads and knockout holes for multiple configurations Lampholder with pigtail leads and knockout holes for multiple configurations; with 13W Bulb Lampholder with pigtail leads and knockout holes for multiple configurations; with 13W Bulb and Lamp Guard Lamp Guard 13W Replacement Lamp
CAT. NO. 9860 9860-B 9860-BL 9860-L 9865
Note: Not intended for use with incandescent lamps, dimmers or occupancy sensors. SPECIFICATIONS AND FEATURES
9860
S
Outlet Box Incandescent Lampholders • 2-Pole, 2-Wire Outlet; 2-Pole, 3-Wire Outlet • Twist-lock mounting • Pull chain models have bell at end of chain on 3 foot cord Fluorescent Ceiling Lampholder* • Installs indoors in closets, garages, basements, utility rooms and attics • Reduces risk of fire in closets and closed spaces • Built of tough thermoplastic • Use with a standard wall switch • Pigtail leads provide easy installation
• Knockout holes on box enable multiple configurations * Patent pending
TESTING AND CODE COMPLIANCE Outlet Box Incandescent Lampholders • UL Listed (File #E-3810; E-7516) • CSA Certified (File #LR-1863) Fluorescent Ceiling Lampholder • cULus Listed • Meets NFPA 70, NEC Section 410.8B Requirements and Canadian Electric Code Requirements for use in closets with lamp guard • Backed by a Limited Two-Year Warranty
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 4Courtesy of Steven Engineering,To learn Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
250W 250V • 660W 250V Medium Base Incandescent Lampholders Metal Shell Lampholders
Ø1. 38( 38. 9)
RATING 250W 250V
10083-16
250W 250V
7070
250W 250V
7090
250W 250V
19980
660W 250V
7080
660W 250V
8004
660W 250V
9347
660W 250V
Ø1. 36( 34. 5)
9346
Interiors — Medium Base, Phenolic Body, Aluminum Screw Shell‡ U R CAT. NO. INTERIOR 19980-M† 10083-M† 7070-M† 7090-M† 9346-M† 7080-M† 8004-M†
RATING 250W 250V
INTERIORS‡ 7092-2M†
95110
660W 250V
7080-M†
95080
660W 250V
8004-M†
Ø 1.38 (34.9)
0.28 (7.1)
CAT. NO. 97092
7090
2.38 (60.3)
Brown Phenolic Cap and Shell Lampholders Two-Piece, Medium Base Electrolier Interiors U R
Ø 1.36 (34.5)
1.06 (27.0)
LAMPHOLDER 19980 10083-16 7070 7090 9346 6098 8004
Incandescent Lampholders
2.38 (60.3)
0.28 (7.1)
1.06 (27.0)
Ø 1.38 (34.9)
Metal Shell Lampholders
DESCRIPTION Pull Cord (nylon); 2-Circuit, 1⁄ 8 IPS Threaded Cap w/Set Screw Push-Through; 1⁄ 8 IPS Threaded Cap w/Set Screw Keyless; 1⁄ 8 IPS Threaded Cap w/Set Screw
0. 28( 71. 0)
CAT. NO. 9346
2. 38( 60. 3)
DESCRIPTION Key—Electrolier; Single Circuit; 1⁄8 IPS Tapped Bushing w/Set Screw Removable Turn Knob—Electrolier; Single Circuit; 1⁄8 IPS Tapped Bushing w/Set Screw Removable Turn Knob—Electrolier; 2-Circuit; 3 Terminal; 1⁄8 IPS Tapped Bushing less Set Screw Removable Turn Knob—Electrolier; 2-Circuit; 1⁄8 IPS Tapped Bushing Pull Chain—Electrolier; Single Circuit; 1⁄8 IPS Tapped Bushing w/Set Screws Push Through—Electrolier; Single Circuit; 1⁄8 IPS Tapped Bushing w/Set Screw Keyless—Electrolier; Single Circuit; 1⁄8 IPS Tapped Bushing w/Set Screw Keyless—Short Electrolier; Single Circuit; 1⁄8 IPS Tapped Bushing w/Set Screw
1. 06( 27. 00)
Medium Base, Choice of Finishes* U R
†UL Recognized component. NOM Certified except where indicated by‡.
Ø 1.36 (34.5)
7080 Ø 1.94 (49.3)
TESTING AND CODE COMPLIANCE • UL Listed (File #E-3810) • CSA Certified (File #LR-1863) • NOM Certified (File #057), except interiors
2.68 (68.2)
*FINISH A suffix must be added to each basic catalog number to indicate the finish desired. For Polished Gilt/Brass finish, add -PG; for Unfinished Aluminum, add -AL; for Polished Aluminum, add -NI (finishes on aluminum). For bright dip/Brass, add -BR (finish on brass). CONSULT LEVITON REPRESENTATIVE FOR AVAILABILITY OF FINISHES.
2.41 (16.1)
SPECIFICATIONS AND FEATURES • Phenolic interior with aluminum screwshell • 2-Circuit lampholders operate dual-filament lamps in sequence of Low-Medium-High-Off • Cat. No. 7070 (2-Circuit, 3-Terminal) is wired in series with keyless lampholder
1.20 (30.5)
Ø 0.75 (19.1)
Ø 1.53 (38.9)
95110
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V Medium, Candelabra Base, Par Connectors—Incandescent Lampholders Medium Base Multi-Lampholder Clusters Treated Aluminum Screw Shell U R DESCRIPTION 2-Light Twin 1⁄ 8 IPS Male Top Bracket Only 2-Light Twin 1⁄ 8 IPS Male (top & bottom) 2-Light Offset 1⁄ 8 IPS Male (top & bottom) 3-Light 1⁄ 8 IPS Male (top & bottom)‡ 2-Light Offset 1⁄ 8 IPS Male (top); Pullchain Switch (bottom) with 1⁄ 2" usable shank# 4034-F5A
2-Light Twin 1⁄ 8 IPS Male (top); Pullchain Switch (bottom) 3⁄ 8" usable shank#
CAT. NO. 4020-A3A
RATING 660W 250V
T 15⁄ 16
5⁄ 16
TA
B —
BA —
OAH T+B —
4015-D4F
660W 250V
111⁄ 16
5⁄ 16
111⁄ 16
7⁄ 16
33⁄ 8
4032-E5F
660W 250V
13⁄4
5⁄ 16
13⁄ 4
7⁄ 16
311⁄ 16
341-D4U
660W 250V
13⁄4
1⁄ 2
13⁄4
7⁄ 16
31⁄ 2
4034-F5A
660W 250V 1A 125V T
13⁄4
5⁄ 16
115⁄ 16
1⁄ 2
33⁄4+
4017-D2F
660W 250V 1A 125V T
11⁄ 16
5⁄ 16
111⁄ 16
3⁄ 8
213⁄ 16+
Incandescent Lampholders
+Includes nut. Leads are No. 18 AWG 105°C plastic; 9" long, stripped 3⁄4"; untinned and pulled through top bracket.
Porcelain Par Connectors U R DESCRIPTION Medium Base for PAR #46 and #38 lamps. Leads are No. 14 AWG 200°C SEW-2 Silicone Rubber Insulated; 18" Long, Stripped 3⁄4". Others available on inquiry‡ Mogul Base for PAR #56 and #64 lamps. Leads are No. 14 150°C SEWF-2; 18" Long, Stripped 3⁄4". Others available upon request
CAT. NO. 368-1
RATING 660W 125V
357-8
1000W 125V
CAT. NO. 905
RATING Low Voltage
Bayonet Socket — Single Contact Candelabra Base 341-D4U
DESCRIPTION Flat Bracket. Leads are No. 18 AWG, 105°C Plastic; 6" Long, Stripped 3⁄4" (one black, one white)#‡
All devices are UL Listed except Cat. No. 905. Also CSA Certified except where indicated by#, and NOM Certified except where indicated by‡.
T
B
1.69 (42.8)
1.81 (46.0)
TA
BA
0.31 (7.9)
0.38 (9.5)
B
T
1.75 (44.5)
1.75 (44.5)
BA
TA
0.44 (11.1)
0.31 (7.9)
BLACK
BLACK
WHITE
WHITE
4032-E5F
4017-D2F
4032-E5F
T
B
1.75 (44.5)
1.94 (49.2)
SPECIFICATIONS AND FEATURES
TA
BA
0.31 (7.9)
0.50 (12.7)
BLACK
• Pull chain models have bell at end of chain on 3 foot cord • Medium and Candelabra bases • Par connectors have white, unglazed porcelain body TESTING AND CODE COMPLIANCE
WHITE
• UL Listed (File #E-13405, E-3810) • CSA Certified (File #LR-5863, LR-1863) • NOM Certified (File #057) 4034-F5A
S more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 6Courtesy of Steven Engineering,To learn Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
1500W 600V • 660W 1000V Mogul Base Incandescent Lampholders
DESCRIPTION Keyless, Single Circuit. For high pressure sodium lamps up to 1000 watts. 8-32 Mounting Screws on 13⁄ 8" Centers Keyless, Single Circuit. Positon-oriented. For Super Metalarc HID lamps. 8-32 Mounting Screws on 13⁄ 8" Centers Keyless, Single Circuit. For high-pressure sodium lamps up to 400 watts. 8-32 Mounting Screws on 13⁄ 8" Centers Low Pressure Sodium. For use with all single-end bayonet base low pressure sodium lamps#‡ Designed for Open-Fixture Shielded Metal Halide Lamps. Complies with NFPA 70-2005 for Open-Rated Fixtures. 8-32 Mounting Screws on 13⁄ 8" Centers
CAT. NO. 8746
RATING 1500W 600V 5KV Pulse-rated
OD 21⁄ 8
OH 31⁄ 64
8750
1500W 600V
25⁄ 32
239⁄ 64
8756
1500W 600V 4KV Pulse-rated
25⁄ 32
239⁄ 64
8806
660W 1000V
13⁄ 8
15⁄ 8
3.02 (76.6)
Porcelain Mogul Base Lampholders With Leads* U R
Ø 2.13 (54.0)
8746
8751
1500W 600V, 25⁄ 32 4KV Pulse Rated
239⁄ 64
*Leads types, lengths and ratings vary with the end use applications. Standard leads as well as variations available on inquiry.
CAT. NO. 8765 8694
RATING 1500W 600V 1500W 600V
OD 25⁄16 25⁄ 32
OH 223⁄ 64 239⁄ 64
Incandescent Lampholders
DESCRIPTION Keyless; 2-Piece; Single-Pole# Keyless;. Single Circuit with 8-32 Lock Nuts on 13⁄ 8" Centers. Die-cast caps available upon request
2.61 (66.3)
Screw Terminals U R
Ø 2.16 (54.8)
CSA Certified except where indicated by#, and NOM Certified except where indicated by‡.
2.61 (66.3)
8750
Ø 2.16 (54.8)
8694 1.75 (44.5)
1.63 (41.3)
SPECIFICATIONS AND FEATURES • Cat. No. 8746 – Porcelain body gray glazed with ceramic arc shield; Cat. No. 8750 – Porcelain body yellow glazed; Cat. No. 8751 – Porcelain body pink glazed • All other moguls listed have white glazed porcelain body • Copper-alloy nickel-plated screw shell
0.56 (14.3)
1.38 (34.9)
TESTING AND CODE COMPLIANCE • • • •
1.63 (41.3)
2.25 (57.2)
8806
UL Listed (File #E-13402) CSA Certified (File #LR-1863) NOM Certified (File #057) Cat. No. 8751 complies with NFPA 70-2005 requirements for open-rated fixtures
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
7
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V • 1500W 600V Medium, Mogul and Candelabra Base Incandescent Lampholders Socket Extensions — Single Circuit Medium–Medium U R
1.00 (25.4)
2.19 (55.5)
DESCRIPTION 2-Piece Porcelain; Mounting Hole 13⁄8" Dia. Extension 11⁄4"* 1-Piece Porcelain; Slotted Mounting Hole 13⁄8" Dia. Extension 11⁄4"* 1-Piece Phenolic. Extension 13⁄16"**
CAT. NO. 2004
RATING 660W 250V
2005
660W 250V
2006
660W 250V
CAT. NO. 8647
RATING 1500W 600V
CAT. NO. 8681 8681-400
RATING 660W 250V 660W 250V 4 KV PulseRated
CAT. NO. 8110
RATING 660W 250V
*To be used with porcelain sockets only **To be used with phenolic sockets only
Mogul–Mogul U R
Ø 1.63 (41.3)
DESCRIPTION 1-Piece Porcelain. Extension 23⁄8"‡
2005
Socket Adapter
1.69 (42.9) 1.94 (49.3)
DESCRIPTION 1-piece. Meets Fed. Spec. W-L-142a‡ Same as above, except 4 KV Pulse-Rated‡
Appliance Heating Receptacle Porcelain Two-Piece U R DESCRIPTION 2-piece Heating Receptacle. Gasket Furnished‡
19062
Porcelain and Phenolic Lampholders Pony Cleat Type U R
Ø 2.19 (55.6)
DESCRIPTION Candelabra Base; Plastic. Not UL Listed#‡ Miniature Base, Plastic. Not UL Listed#‡ Medium Base, Phenolic Medium Base, Porcelain
0.77 (19.4)
1.94 (49.3)
1.53 (38.9)
Incandescent Lampholders
Mogul-To-Porcelain Medium U R
CAT. NO. 10028
RATING 75W 125V
OD 17⁄ 16
OH 7⁄ 8
C 11⁄ 8
10020
75W 125V
15⁄ 16
7⁄ 8
31⁄ 32
9063 19062
660W 250V 660W 250V
17⁄ 8 17⁄ 8
11⁄ 2 11⁄ 2
115⁄ 16 115⁄ 16
CAT. NO. 9880
RATING 660W 250V
OD 2 5⁄16
OH 11⁄ 2
C 13⁄ 8
9882
660W 250V
2 5⁄16
17⁄ 8
13⁄ 8
Surface Type U R
Ø 2.31 (58.7)
9880
DESCRIPTION Medium Base; Porcelain; Low 2-Piece Medium Base; Porcelain; High 2-Piece#‡
CSA Certified except where indicated by#, and NOM Certified except where indicated by‡.
SPECIFICATIONS AND FEATURES • Medium-to-Medium Extenders available in phenolic and porcelain • Pony Cleat Receptacles have open wiring terminals • Two-piece surface-type lampholders have concealed wiring terminals with wireways for top and continuous wiring TESTING AND CODE COMPLIANCE • UL Listed (File #E-3810; E-13396) • CSA Certified (File #LR-1863) • NOM Certified (File #057)
S more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 8Courtesy of Steven Engineering,To learn Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V • 250W 250V Medium Base Incandescent Lampholders Porcelain Snap-In Lampholders — Medium Base Screw Terminals U R CAT. NO. 8880
RATING 660W 250V
OD 111⁄ 16
OH 11⁄ 2
8875
660W 250V
111⁄ 16
111⁄ 16
1.64 (41.6)
DESCRIPTION 1-Piece, Front Mounted. 1⁄4" Shoulder. Panel Thickness: .025 –.062" 1-Piece, Front Mounted. Shallow Back. Panel Thickness: .030 –.062"
Ø 1.36 (34.5)
Porcelain Keyless Lampholders Commercial Units — Medium Base Single Circuit Screw Terminals U R CAT. NO. 10045 10065
RATING 660W 250V 660W 250V
OD 11⁄ 2 Body 11⁄ 2
OH 21⁄ 8 21⁄ 8
20070
660W 250V
Bead 21⁄4 ringnut —
10085
660W 250V
11⁄ 2
111⁄ 16
Ø 1.69 (42.9)
8880
15⁄ 8
Fixture Pan Lampholder with 1⁄ 8" IPS Hickey
RATING 660W 600V
OD 15⁄ 8
OH 17⁄ 16
9350 8871 3152-8
660W 250V 660W 250V 660W 250V
13⁄ 4 111⁄ 16 13⁄8
13⁄ 8 19⁄ 16 17⁄ 16
CAT. NO. 8101
RATING 660W 250V
OD 13⁄ 4
OH 13⁄ 8
18315
660W 250V
—
—
8052-1 70052-100
660W 250V 13⁄ 8 660W 600V, 145⁄ 64 4KV Pulse Rated
17⁄ 16 29⁄ 32
CAT. NO. 9814
RATING 250W 250V
OH 113⁄ 16
1.69 (42.9)
CAT. NO. 9885
Incandescent Lampholders
Porcelain Keyless Fixture Single Circuit — Medium Base Screw Terminals U R DESCRIPTION 1-Piece, Front Mounted for Fixture or Sign Use. Tapped 8-32 Bushings, Mounting Centers 113⁄ 16". 2-Piece, Ring Type 1-Piece with Removable Strap#
Ø 0.84 (21.4)
0.16 (4.0)
DESCRIPTION Straight Body with Cap. Screw Terminals. Beaded Body for 11⁄ 2" Clamp Style Shadeholder with Cap. Screw Terminals. Adjustable Glass Retaining Ring with Cap and Ring Nut. Screw Terminals. Straight Body with Leads. No. 18 AWG 105°C Plastic; 9" Long, Stripped 3⁄4" with Two 6/32 Mounting Screws
Ø 1.50 (38.1)
10085
Two-Piece Pull Chain U DESCRIPTION Ring Type; Screw Terminals; Gasket Furnished#‡
OD 113⁄ 16
1.88 (47.8)
DESCRIPTION 2-Piece Ring Type with Leads: No. 18 AWG, 105°C Plastic; 9" Long, Stripped 3⁄4" Angle Pan with Leads: No. 18 AWG Type AF 150°C Plastic; 9" Long, Stripped 3⁄4" Removable Bracket with Leads Screw-Mount Pulse-Rated Lampholder with Leads for Open-Fixture Lamps; 18 AWG 200ºC 600V SEW-2 (SF-2) wire; 9" Long, Stripped 1⁄2"
1.52 (38.5)
Leads U R
Ø 1.38 (34.9)
CSA Certified except where indicated by#, and NOM Certified except where indicated by‡.
3152
Ø 1.75 (44.4)
SPECIFICATIONS AND FEATURES
1.47 (37.3)
• Suitable for a wide variety of fixtures, signs and displays • Unglazed base and ring on two-piece lampholders • Gasket supplied with two-piece ring type rated at 90°C dry maximum TESTING AND CODE COMPLIANCE • UL Listed (File #E-3810) • CSA Certified (File #LR-1863) • NOM Certified (File #057)
8101
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
9
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 250V • 250W 250V • 3000W 600V Medium Base, Metal Halide and Quartz Halogen Incandescent Lampholders Phenolic Keyless Fixture — Medium Base Screw Terminals U R
1.44 (36.5)
2.22 (56.4)
DESCRIPTION Permanent Bracket. Terminal Screws Backed Out and Staked Same as 3352-1, with Shorter Bracket Removable Hickey. Terminal Screws Backed Out and Staked
CAT. NO. 3352-1
RATING 660W 250V
3352-F 3352-8
660W 250V 660W 250V
Hickeys and brackets are available in various types and sizes. Consult a Leviton representative for more information.
Porcelain Keyless, Side-Mounted — Medium Base Screw Terminals U R
Ø 1.25 (31.7)
DESCRIPTION Single Lampholder w/Side Outlet Bushing—1⁄8 IPS Twin Lampholder w/Bushed Flange—1⁄8 IPS Twin Lampholder w/Single Outlet Bushing—1⁄8 IPS Same as 4005 with 3⁄8 IPS Bushing
3352-1
CAT. NO. 10091 4010 4005 4006
RATING 660W 250V 660W 250V 660W 250V 660W 250V
Ø 1.50 (38.1)
3.00 (76.2)
Candle Sockets, Bottom Turn Knob — Medium Base Screw Terminals U DESCRIPTION Three-light, two-piece phenolic husk. Lighting sequence: LO-MED-HI-OFF#
4005
Ø 0.82 (20.9) 1.22 (30.9) Ø 0.64 (16.3)
CAT. NO. 4063
RATING 250W 250V
Lampholders for Recessed Single Contact Lamps U R
0.08 (2.0)
1.56 (39.7)
Incandescent Lampholders
All bushings are tapped and have set screw
DESCRIPTION Front Flange Mount. Standard Leads are No. 18 AWG, Type SEW-2, 200°C, 18" Long, Stripped 3⁄4"‡ Rear Flange Mount. Same Leads and Specs as No. 554‡
CAT. NO. 554
RATING 3000W 600V
555
3000W 600V
Lampholders for Metal Halide and Quartz Halogen Lamps U R 0.94 (23.9)
554
0.64 (16.3)
DESCRIPTION Single-Ended Metal Halide for Lamps with a G8.5 Base. Lead-In Edge on Body Ensures Proper Lamping. Standard Leads (2) are Black No. 18 AWG, Type SEW-2, 200ºC 600V Wire, 9" Long, Stripped .325"‡ Single-Ended Metal Halide for Lamps with a GX8.5 Base, such as Philips CDM-R11, rated up to 150W. Standard Leads (2) are Black No. 18 AWG, SEW-2, 200ºC 600V Wire, 12" Long, Stripped 1⁄2"‡ Twist-In Single-Ended Quartz Halogen for Lamps with a GU10 Base, rated up to 150W. Fully Dimmable; Standard Leads (2) are White, No. 20 AWG Teflon® wire, rated 250ºC 600V, 6" Long, Stripped 1⁄2"‡
CAT. NO. 560
RATING 660W 600V, 5KV Pulse Rated
565
660W 600V, 5KV Pulse Rated
570
660W 600V
Ø 0.96 (24.5)
CSA Certified except where indicated by #, and NOM Certified except where indicated by‡.
SPECIFICATIONS AND FEATURES
1.16 (29.5)
560
• Cat. No. 3352 lampholder bodies have wireways • Side-Mounted lampholders are white glazed porcelain with copper-alloy screwshell • Recessed Single-Contact lampholders have porcelain body with nickel-plated steel housing • Cat. No. 560 has a metal lamp-positioning clip (patent pending) that maintains lamp seating position • Cat. No. 565 is designed for energy-efficient CDM lamps • Cat. No. 570 twists in and is fully dimmable TESTING AND CODE COMPLIANCE • UL Listed (File #E-3810) Cat. Nos. 560, 565 and 570: cULus (File #E-13405) • CSA Certified (File #LR-1863) • NOM Certified (File #057)
S To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 10 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 250V • 250W 250V • 75W 125V Candelabra and Medium Base Incandescent Lampholders Ø 1.27 (32.1)
CAT. NO. 4155
RATING 660W 250V
4158
660W 250V
CAT. NO. 8684 9800
RATING 660W 250V 660W 250
Candle Sockets, Keyless* — Medium Base Fiber-Disc Body, Screw Terminals U R DESCRIPTION Solid Hickey, 2" Overall Height‡ Adjustable Hickey. Overall Height: 4–53⁄4"
0.46 (11.6)
3.13 (79.5)
DESCRIPTION 1-Piece Phenolic Body; 2 Leg Bracket; Single Light; Removable Interior; Knurl Nut and Lock Nut 2-Piece Phenolic Husk & Removable Interior Husk; Single Light; Knurl Nut
1.75 (44.5)
Candle Sockets, Bottom Turn Knob — Medium Base Screw Terminals U R
4155
Candle Sockets, Phenolic — Medium Base With Removable Turn Knob, Screw Terminals U R CAT. NO. 9805*
RATING 250W 250V
9805-A*
250W 250V
NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of 13/16" dia. flat at bottom of candle for clearance.
Candelabra Base, Keyless* U R‡ DESCRIPTION Screw Terminals; Solid Hickey. Overall Height: 2" Screw Terminals; Solid Hickey. Overall Height: 11⁄2" Screw Terminals; Adjustable Hickey: 31⁄4–43⁄4" Double Snap-In Spring Clips. Height of socket from panel is 1". Leads are No. 18 AWG 105°C plastic, 24" long, stripped 1⁄2"
Ø 1.16 (29.4)
CAT. NO. 10025 10027 10026 10014-800
RATING 75W 125V 75W 125V 75W 125V 75W 125V
9805 Ø 0.78 (19.8)
2.09 (53.1)
*7/8" candle tube. All hickeys tapped 1/8 IPS. NOM Certified except where indicated by‡
Incandescent Lampholders
DESCRIPTION Removable Knob (Short Type), Adjustable Hickey. Overall Height: 4–51⁄2" Removable Knob, Removable 1-Leg Hickey. Overall Height: 27⁄16"
1.03 (26.2)
*Insulating paper liner pushes down against hickey projections. NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of 13/16" dia. flat bottom of candle cup for clearance.
10025 SPECIFICATIONS AND FEATURES
0.77 (19.4) Across Flats
TESTING AND CODE COMPLIANCE • UL Listed (File #E-3810; E-13400) • CSA Certified (File #LR-1863) • NOM Certified (File #057)
1.22 (31.0)
• Candle sockets for single-light applications • Fiber Disc Body for use with standard candle tubes • Spring-tempered steel clip holds Cat. No. 10014-800 socket rigidly in place
10014-800
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
11
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 125V • 660W 250V Candelabra and Medium Base Incandescent Lampholders Ø 0.78 (19.8)
Candle Sockets — Porcelain Candelabra Base Screw Terminals U DESCRIPTION Solid Hickey.* Overall Height: 23⁄ 32"#‡
CAT. NO. 20025
RATING 75W 125V
2.09 (53.1)
*Other hickey sizes available
Keyless Heavy Duty Phenolic Single Circuit Lampholders Two-Piece Pin Type U R
20025
DESCRIPTION Candelabra Base, Detachable Zinc-Plated Wire Hook. Accepts No. 20 – No. 18 Stranded Insulated Wire Medium Base, Detachable Zinc-Plated Wire Hook. Accepts No. 14 – No. 12 Stranded Insulated Wire
CAT. NO. 267**
RATING 75W 125V
167**
660W 250V
CAT. NO. 55**
RATING 660W 250V
157**
660W 250V
157-X** 124-D
660W 250V 660W 250V
Note: Linings assembled. **For temporary lighting — not waterproof.
1.25 (31.8)
DESCRIPTION Vinyl, Phenolic Interior & Screw Shell, Brass Shell Contact. Leads are No. 14 AWG, 6" Long, Stripped 3⁄4", Molded into Boots‡ Phenolic with Brass Screw Shell. Leads Soldered and Hot Waxed in Deep Well are No. 14 AWG 6" Long Same as 157 above, with Left-Hand Screw Shell Rubber, Aluminum Screwshell. Leads are No. 16 AWG, 6" Long, Soldered to Terminals and Sealed in Rubber Boot# Ø 0.75 (19.0)
267
**For temporary lighting—not waterproof. All devices are UL Listed except Cat.No. 124-D. Also CSA Certified except where indicated by #, and NOM Certified except where indicated by‡ Note: The listed products may be used at construction sites provided that bulb cages are used and suitable splices are made. The listing for the products meets the OSHA requirement and is made for open wiring without a separate outlet box.
1.88 (47.8)
Incandescent Lampholders
Pigtail Type Medium Base with Leads U R
Ø 1.5 (38.1)
167 SPECIFICATIONS AND FEATURES Ø 1.64 (41.7)
• Candle socket has white unglazed porcelain body with aluminum screw shell • Choice of Pin-Type or Pigtail Type for temporary lighting applications • Two-Piece Pin Type automatically pierces wire leads
2.12 (54.0)
TESTING AND CODE COMPLIANCE • UL Listed (File #E-13400) 267** • UL Listed (File #E-3810) 55**, 157**, 157-X** and 167** • CSA Certified (File #LR-1863) • NOM Certified (File #057)
55
S To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 12 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 1000V • 660W 250V Medium, High Output and Slimline—Linear Fluorescent Lampholders RATING
13550
13551
660W 600V
13556
13557
660W 600V
CAT. NO. PLUNGER 452 — 466 — 2536 —
CAT. NO. FIXED — 453 — 467 — 2537
RATING
CAT. NO. WHITE 431-W
RATING 660W 600V
390-1W
660W 600V
660W 600V 660W 600V
For Slimline, Single Pin Lamps U R Butt-On Surface Mounting, 12" Leads‡ Pedestal Base, Slide-On Shallow Base, Slide-On or Lock-On Mounting, Quickwire Terminals*
13464
1.31 (33.3)
391-1W
660W 600V
CAT. NO. 380 396
RATING 660W 250V 660W 250V
1.28 (32.5)
2536
Starter Bases
0.17 (4.3)
NOM Certified except where indicated by‡ *Suitable for outdoor applications when properly enclosed
1.75 (44.5)
DESCRIPTION Starter Base; Screw Terminals, Black‡ Starter Base; with Leads, Black‡
1.17 (29.7)
For Medium Bi-Pin Lamps U R
1.31 (33.3)
1.12 (28.5)
Fluorescent Lampholders
Thin Body, Quickwire Terminals Accommodate Rapid-Start Circuits Pedestal type, Straight-in Wiring Through Wireways or Screw Terminals‡ Same as above, with Starter Base‡
1.44 (36.5)
660W 1000V 660W 600V 660W 1000V 660W 600V 660W 1000V 660W 600V
For Medium Bi-Pin Lamps U R DESCRIPTION
1.66 (42.1)
1.84 (46.7)
DESCRIPTION
2.30 (58.3)
CAT. NO. FIXED 13465 23465
1.14 (29.0)
Screw Mount, Push-in wiring.* Same as 13464/13465 except with Internal Shunt Connection for Electronic Ballasts* Slide-on, Shallow Base, Quickwire Terminals* Slide-on, Shallow Base for Power Groove and Jacketed Lamps, Quickwire Terminals*
CAT. NO. PLUNGER 13464 23464
1.17 (29.7)
DESCRIPTION
1.74 (44.2)
For High Output Lamps — Recessed Double Contact, Pedestal Type U R
2537 0.97 (24.6)
0.47 (11.9)
SPECIFICATIONS AND FEATURES • Silver-plated copper alloy contacts • Quickwire terminals accept No. 18 AWG twisted and tinned, solder-dipped or solid leads • Lampholders are white, starter bases are black TESTING AND CODE COMPLIANCE • UL Listed (File #E-5833) • CSA Certified (File #LR-1863; LR-5863; LR-2200) • NOM Certified (#057)
1.25 (31.8)
1.06 (27.0)
396
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
13
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V • 660W 1000V • 75W 250V Medium and Miniature Bi-Pin Lamps—Linear Fluorescent Lampholders For Medium and Miniature Bi-Pin Lamps — Surface Mount with Leads* U R
1.25 (31.8) 0.97 (24.6)
Rapid-Start Medium Bi-Pin, 9" leads Rapid-Start Medium Bi-Pin, Disconnect (paired with Cat. No. 395-W), 9" leads Miniature Bi-Pin for T5 Lamp, 6" leads
0.53 (13.5)
1.22 (31.0)
DESCRIPTION
RATING 660W 600V 660W 600V
420-W
75W 250V
*Leads are No. 18 AWG, 105°C plastic insulated wire
For Slimline, Medium Bi-Pin, High Output Lamps — Snap-In with Quickwire U R 0.44 (11.1)
DESCRIPTION Slimline‡
395-W
Medium Bi-Pin, Stainless Steel Coverplate & Clip Medium Bi-Pin, Same as above, with Internal Shunt for Use with Electronic Ballasts High Output 800mA and 1500mA ‡
1.28 (33.5)
0.66 (16.7)
0.75 (19.1)
Fluorescent Lampholders
CAT. NO. WHITE 395-W 389-W
CAT. NO. PLUNGER 516 — 13518 — 23518 —
CAT. NO. FIXED — 517 — 13519 — 23519
RATING
523 —
— 524
660W 600V 660W 600V
660W 1000V 660W 600V 660W 600V 660W 600V 660W 600V 660W 600V
NOM Certified except where indicated by‡
0.48 (12.3)
0.64 (16.3)
420-W
Ø1.6
0.55 (14.0)
4 (41
.7)
47.75 (1212.9) FOR 48" LAMPS
13518 PLUNGER STYLE
13518 — see diagram right
13519 STATIONARY STYLE
Medium Bi-Pin Spacing
45°
0. (4 188 .7 6)
SPECIFICATIONS AND FEATURES R 0.813 (20.64)
KEY for 13518/13519
)
.50
38
( .52
1
PANEL OPENING FOR 13518/13519
• Versatile snap-in mounting reduces fixture assembly time • Quickwire terminals accept either No. 18 AWG (stranded, twisted or tinned), No. 18 AWG solid or No. 16 AWG solid. • Internal Shunt versions stamped “S” on back for easy identification TESTING AND CODE COMPLIANCE • UL Listed (File #E-5833) • CSA Certified (File #LR-5863; LR-1863) • NOM Certified (#057)
PANEL THICKNESS 0.035-0.050 (0.89-1.27)
S To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 14 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V Medium Bi-Pin Lamps—Linear Fluorescent Lampholders CAT. NO. 13353-N 13357-N 13359-N
RATING 660W 600V 660W 600V 660W 600V
13351-D 13354-D 23351
660W 600V 660W 600V 660W 600V
0.38 (4.5)
DESCRIPTION Low Profile, Slide-On, with Captive Nut Tall Profile, Slide-On, with Captive Nut Tall Profile without Side Grooves, Slide-On, with Captive Nut Low Profile Disconnect, Slide-On Tall Profile Disconnect, Slide-On Low-Profile; Shunted, Slide-On
1.68 (42.6)
For Medium Bi-Pin Lamps — Turn-Type U R
0.34 (8.6)
1.25 (31.8)
For Medium Bi-Pin Lamps — Straight-In U R
For Medium Bi-Pin Lamps — Snap-In/Slide-On Design and Lamp-Lock U R CAT. NO. 13653-WP
RATING 660W 600V
13653-NP 23653-WP
660W 600V 660W 600V
23653-NP 13652-WP
660W 600V 660W 600V
23652-WP
660W 600V
13652-WWP
600W 600V
13652-WNP 23652-WWP
600W 600V 600W 600V
23652-WNP 13653-WWP
600W 600V 600W 600V
13653-WNP 23653-WWP
600W 600V 600W 600V
23653-WNP
600W 600V
0.34 (8.6)
1.25 (31.8)
0.72 (18.3)
13357-N
0.22 (5.9)
1.35 (34.2)
0.98 (24.9)
0.67 (17.0)
Fluorescent Lampholders
DESCRIPTION Snap-In or Slide-On Mounting Featuring Lamp-Lock, with Panel Locator Post. For T-8 and T-12 Lamps Same as Above, Less Locator Post Same as 13653-WP, Except with Internal Shunt Connection for Electronic Ballasts Same as Above, Less Locator Post Snap-In or Slide-On Mounting Featuring Lamp-Lock, Optional Panel Locator Post. Dedicated for Energy-Efficient T-8 Lamps Only Same as 13652, Except with Internal Shunt Connection for Electronic Ballasts Snap-In or Slide-On Mounting Featuring Lamp-Lock, for Energy-Efficient T-8 Lamps Only. Wide-Wing Design Same as Above, Less Locator Post Same as 13652-WWP, Except with Internal Shunt Connection for Electronic Ballasts Same as Above, Less Locator Post Snap-In or Slide-On Mounting Featuring Lamp-Lock, for T-8 and T-12 Lamps. Wide-Wing Design Same as Above, Less Locator Post Same as 13653-WWP, Except with Internal Shunt Connection for Electronic Ballasts Same as Above, Less Locator Post
13351-D
RATING 660W 600V 660W 600V
2.04 (51.8)
CAT. NO. 13150-UR5 13451-N
0.38 (9.7)
DESCRIPTION Low Profile, Slide-On Self-Locking; Slide-In, with Captive Nut. For use with T-8 Lamps
0.72 (18.2)
13653-WP
NOTE: Also available with bottom push-in wiring. Contact your Leviton representative for further details. 0.18 (4.50) 0.31 (7.90)
1.02 (25.8)
Recommended Panel Thickness 0.02-0.03 (0.53-0.79) 1.00 (25.50)
Recommended Panel Opening for all -WP, -NP Medium Bi-Pin Snap-In/Slide-On Lampholders
Recommended Panel Opening for Medium Bi-Pin Turn-Type Lampholders This is only a recommendation — lampholder will function over a wider range
Ø 0.18 (4.50) 0.38 0.31 (9.53) (7.90)
TESTING AND CODE COMPLIANCE • UL Listed (File #E-5833) • CSA Certified (File #LR-1863; LR-5863; LR-2200) • NOM Certified (#057) • Medium Bi-Pin lamps with SnapIn/Slide-On Design and Lamp-Lock are VDE Certified to IEC
0.38 (9.53)
SPECIFICATIONS AND FEATURES Lamp-Lock • Four-position lamp-lock socket rotates 90°, forward and back, for quick relamping • Lamp-Lock models have slim, low profile silhouette that fits 22 to 25 gauge panels • Chemical-resistant white thermoplastic body
Recommended Panel Thickness 0-021-0.031 (0.53-0.79) 1.031 (26.20)
Recommended Panel Opening for all -WWP, -WNP wide-wing models
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
15
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
120W 600V • 660W 600V Medium and Miniature Bi-Pin Lamps—Linear Fluorescent Lampholders For Medium Bi-Pin Lamps — Slide-On Design and Lamp-LockU R
0.75 (19.1) 0.37 (9.4)
1.11 (28.2)
DESCRIPTION Medium Profile 0.91 (23.0) Lamp Center. Slide-On Mounting Featuring Lamp Lock. For T-8 and T-12 Lamps Same as 13661, Except with Internal Shunt Connection for Electronic Ballasts Tall Profile 1.18 (30.0) Lamp Center. Slide-On Mounting Featuring Lamp Lock. For T-8 and T-12 Lamps Same as 13660, Except with Internal Shunt Connection for Electronic Ballasts
RATING 660W-600V
23661
660W-600V
13660
660W-600V
23660
660W-600V
For Miniature Bi-Pin Lamps — Snap-In/Slide-On Design and Lamp-Lock U R
0.34 (8.6)
1.43 (36.3)
13654-SNP
1.39 (35.3) 1.19 (30.2)
13654-EXL
DESCRIPTION Low Profile 0.62 (15.7) Lamp Center, Snap-In or Slide-On Mounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 Lamps Same as Above, Less Locator Post Tall Profile 0.98 (24.9) Lamp Center, Snap-In or Slide-On Mounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 Lamps Same as Above, Less Locator Post Low Profile 0.62 (15.7) Lamp Center, Snap-In or Slide-On Mounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 Lamps. Internal Shunt Connection for Electronic Ballasts Same as Above, Less Locator Post Tall Profile 0.98 (24.9) Lamp Center, Snap-In or Slide-On Mounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 Lamps. Internal Shunt Connection for Electronic Ballasts. Same as above, Less Locator Post
CAT. NO. 13654-SWP
RATING 120W 600V
13654-SNP 13654-TWP
120W 600V 120W 600V
13654-TNP 23654-SWP
120W 600V 120W 600V
23654-SNP 23654-TWP
120W 600V 120W 600V
23654-TNP
120W 600V
13654-EXL
120W 600V
13654-EXS
120W-600V
T-8 to T-5 Adapter U R
1.43 (36.3)
Long T-8 to T-5 Adapter, converts existing T-8 fixtures to accept energy-efficient T-5 lamps; with Lamp Lock. Specify lamp length for proper ordering Short T-8 to T-5 Adapter, converts existing T-8 fixtures to accept energy-efficient T-5 lamps; with Lamp-Lock. Specify lamp length for proper ordering 0.34 (8.6)
1.19 (30.2) 1.19 (30.2)
13654-EXS
0.79 (20.0)
0.39 (1O.0) 0.39 (10.0)
0.350 (8.89)
0.38 (9.7)
0.14
)
(3.71
0.28 (17.14)
Fluorescent Lampholders
CAT. NO. 13661
SPECIFICATIONS AND FEATURES
PANEL CUTOUT 20–23 GAUGE PANELS
Recommended Panel Opening for Miniature Bi-Pin Snap-In/Slide-On Lampholders
0.375 (9.53)
1.031 (26.18)
Recommended Panel Opening for Medium Bi-Pin Slide-On Lampholders 1.02 (25.9)
Recommended Panel Opening for T-8 to T-5 Adapter
Lamp-Lock • Four-position lamp-lock socket rotates 90°, forward and back, for quick relamping • Lamp-Lock models have slim, low profile silhouette that fits 22 to 25 gauge panels • Chemical-resistant white thermoplastic body T-8 to T-5 Adapter • Cost-effective solution to incorporate miniature bi-pin T-5 lamps into existing T-8 configurations TESTING AND CODE COMPLIANCE • UL Listed (File #E-5833) • CSA Certified (File #LR-1863; LR-5863; LR-2200) • NOM Certified (#057) • Medium Bi-Pin Lamps with Slide-On Design and Lamp-Lock are VDE Certified to IEC
S To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 16 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
660W 600V Long Twin Tube with 2G11 Base—Compact Fluorescent Lampholders 4-Pin Long Twin-Tube with 2G11 Base — Slide-In Mounting U R DESCRIPTION Slide-In for 18-20 Ga. Panels, Quickwire Terminals
CAT. NO. 13452
RATING 660W 600V
4-Pin Long Twin-Tube with 2G11 Base — Bottom or Back Mounting U R DESCRIPTION Vertical Snap-In Mounting, Side Push-In Wiring Same as above, with Internal Shunt Connection for Electronic Ballasts Horizontal Snap-In Mounting, Bottom Push-In Wiring Same as above, with Internal Shunt Connection for Electronic Ballasts Horizontal Screw-Mount. Bottom Push-In Wiring Same as above, with Internal Shunt Connection for Electronic Ballasts
CAT. NO. 13453 23453 13454 23454 13455 23455
RATING 660W 600V 660W 600V 660W 600V 660W 600V 660W 600V 660W 600V
13453
Note: See page S18 for Lamp Support Clips
0.86 (21.8) 0.69 (17.5)
0.86 (21.8) 0.69 (17.5)
0.39 (9.9)
0.39 (9.9)
13453 and 23453
0.52 (13.2)
0.524 (13.31)
0.023-0.040 (0.58-1.02)
0.023-0.040 (0.58-1.02)
1.94 (49.3)
1.00 (25.4)
0.95 (24.1) 0.15 (3.8)
0.30 (7.6) 1.32 (33.5)
0.52 (13.2)
13453
PANEL-THICKNESS .023-.039 (0.58–0.99) MAX., INCLUDING PAINT
23453
1.000 (25.4)
Recommended Panel Opening for 13453, 23453, 13454 and 23454
0.26 (6.6)
0.30 (7.6)
1.90 (48.3) 0.95 (24.1)
0.52 (13.2)
13454 and 23454
0.023-0.040 (0.58-1.02)
Ø 0.146 (3.71)
13454
Fluorescent Lampholders
13454
23454
SPECIFICATIONS AND FEATURES
0.80 (20.3) 0.20 (5.1)
0.94 (23.9)
0.30 (7.6)
0.96 (24.4)
0.95 (24.1)
Ø 0.146 (3.71)
• UL Listed (File #E-5833) • CSA Certified (File #LR-1863) • NOM Certified (File #057)
0.83 (21.1)
TESTING AND CODE COMPLIANCE
1.87 (47.5)
1.35 (34.3)
• Vertical Snap-In model allows wires to be routed on either top or bottom of panel • Two wiring ports per contact speed harness wiring • Internal Shunt models eliminate need for extra jumper wire in fixtures designed for electronic ballasts • Low-profile design for smaller, more compact fixtures • Superior metal-spring lamp retainer clips
R0.078 (1.98)
1.35 (34.3)
Ø 0.174 (4.42)
13455 and 23455
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
17
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
LAMP SUPPORT CLIPS Lamp Support Clips for Long Twin Tube 2G11 Base Fluorescent Lampholders Plastic and Stainless Steel Lamp Support Clips DESCRIPTION Plastic Lamp Support Clip, Slide-On Plastic Lamp Support Clip, Screw Mount Horizontal Snap-In Lamp Support Clip for 13454, 23454, 13455 and 23455. UV-Stable, Clear Polycarbonate Vertical Snap-In Lamp Support Clip for 13453 and 23453. UV-Stable, Clear Polycarbonate Stainless Steel Horizontal Lamp Support Clip, Short Version Stainless Steel Horizontal Lamp Support Clip, Tall Version
23452-H
CAT. NO. 23452-A* 23452-B* 23452-H* 23452-V* 23452-MTS 23452-MTL
*Note: Leviton strongly recommends replacing support clips 23452-A, 23452-B, 23452-V and 23452-H during lamp replacement. 0.20 (5.1)
SUGGESTED PANEL CUTOUT FOR LAMP SUPPORT CLIPS 0.62 (15.7)
0.43 (10.9)
0.43 (10.9)
PANEL THICKNESS .023-.039 (0.58-0.99) MAX. INCLUDING PAINT
0.17
Vertical Lamp Support Clip—23452-V 0.20 (5.1) 0.78 (19.8)
0.83 (21.1)
23452-MTL
0.43 (10.9)
1.12 (28.4)
RO.37(9.4)
0.17 (4.3)
0.65 (16.5)
Horizontal Lamp Support Clip—23452-H PLASTIC SUPPORT
1.45 (36.8)
1.31 (33.3)
0.83 (21.0)
23452-MTS
0.69 (17.5)
Fluorescent Lampholders
23452-V
)
5.54
18 (
Ø0.2
METAL CLIP
0.56 (14.2)
Horizontal Lamp Support Clips 23452-MTS, 234452-MTL
Horizontal Lamp Support Clip, Short 23452-MTS
Horizontal Lamp Support Clip, Tall 23452-MTL
SPECIFICATIONS AND FEATURES • Choice of quality lamp support clips in a variety of configurations for long twin tube lamps with 2G11 base • UV stable clear polycarbonate clips for vertical or horizontal mounting • Stainless steel clips with UV stable clear polycarbonate base for horizontal mounting only; short or tall versions • Plastic clips for slide-on or screw-mount
S To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 18 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V Compact Fluorescent Lampholders (CFLs) 10mm Compact Fluorescent Lampholders For G23 and G23-2 Lamp Bases — Rating: 75 WATT 600V U R MOUNTING
CAT. NO.
COLOR
Horizontal Snap-In
26719-100
White
Horizontal Screw-Down Vertical Top Snap-In 4-Hole Vertical Screw-Down Vertical Bottom Snap-In
26719-200
White
LAMP BASE G23, G23-2 G23, G23-2 G23 G23, G23-2 G23, G23-2
26719-300* White 26719-400 White 26719-500
White
PHILIPS
OSRAM SYLVANIA
GE LIGHTING
PL-S 5W, 7W 9W
DULUX S 5W, 7W, 9W DULUX D 9W
BIAX, 5W, 7W 9W DOUBLE BIAX 9W
26719-100
*Not compatible with 9-watt DTT lamps
For GX23 and GX23-2 Lamp Bases — Rating: 75 WATT 600V U R MOUNTING
CAT. NO.
Horizontal Snap-In
26720-100
4-Hole Vertical Screw-Down Vertical Bottom Snap-In
White w/Black 26720-200 White w/Black 26720-300* White w/Black 26720-400 White w/Black 26720-500 White w/Black
LAMP BASE GX23, GX23-2 GX23, GX23-2 GX23 GX23, GX23-2 GX23, GX23-2
PHILIPS
OSRAM SYLVANIA
GE LIGHTING
PL-S 13W PL-C 13W
DULUX S 13W DULUX D 13W
BIAX 13W DOUBLE BIAX 13W
Fluorescent Lampholders
Horizontal Screw-Down Vertical Top Snap-In
COLOR
26719-200
*Not compatible with 13-watt DTT lamps 1.40 (35.56) 0.68 (17.27)
0.77-0.79 (19.56-20.06)
0.69 (17.53)
1.23 (31.24)
0.87 (22.10)
1.22 (30.99)
0.22 (5.59)
R 0.41 (10.41)
1.22 (30.99)
1.33 (33.78)
0.56 (14.22)
1.22 (30.99)
0.68 (17.27)
26720-300
Horizontal Snap-In CFLs 26720-100 Shown
0.39 (9.91)
0.13 (3.30)
0.39 (9.91)
NOTE: PUNCH PANEL FROM THE DIRECTION OF LAMPHOLDER INSERTION. RECOMMENDED PANEL THICKNESS 0.023-0.039 (0.58-0.99) MAX INCLUDING PAINT
0.13 (3.30)
1.01 (25.65) 0.88 (22.35)
NOTE: PUNCH PANEL FROM THE DIRECTION OF LAMPHOLDER INSERTION. RECOMMENDED PANEL THICKNESS 0.023-0.039 (0.58-0.99) MAX INCLUDING PAINT
26720-400
• Four screw holes for greater mounting flexibility • Wire-routing options for top or bottom side of mounting panel for easier assembly • White thermoplastic body
1.09 (27.8)
1.20 (30.6)
0.81 (20.6)
0.22 (5.5)
1.00 (25.4)
• “Smart” CFL Lampholders are color-coded for easy wattage identification • Bottom Snap-In versions for easier panel assembly • Snap-In versions designed for 16 Ga. panels • Metal-spring lamp-retainer clip provides positive lamp retention and is more durable than plastic clips • Two wiring ports per contact speed harness wiring
Vertical Top Snap-In CFLs 26720-300 Shown
1.39 (35.31) PANEL CUTOUT
1.00 (25.4)
SPECIFICATIONS AND FEATURES
0.22 (5.59)
1.40 (35.6)
1.40 (35.56)
TESTING AND CODE COMPLIANCE • UL Listed (File #E-5833) • UL Listed for indoor and outdoor applications when properly enclosed • CSA Certified (File #LR-1863) • NOM Certified (File #057)
Ø 0.19 (4.75) 0.81 (20.6)
NOTE: RECOMMENDED MOUNTING SELF-THREADING #8 SCREW
RECOMMENDED PANEL OPENING
4-Hole Vertical Screw-Down CFLs — 26720-400 Shown
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
S 19
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V Compact Fluorescent Lampholders (CFLs) 10mm Compact Fluorescent Lampholders For G24d Lamp Bases 2-Pin — Rating: 75 WATT 600V U R MOUNTING Bottom Snap-In For 16 Ga. Panels For 18-20 Ga. Panels For 16 Ga. Panels For 18-20 Ga. Panels For 16 Ga. Panels For 18-20 Ga. Panels Bottom Screw-Down 4-Hole
26725-213
CAT. NO.
COLOR
LAMP BASE
PHILIPS
OSRAM SYLVANIA
GE LIGHTING
26725-201 26725-221 26725-202 26725-222 26725-203 26725-223
White w/Black Green
G24d-1 G24d-2
Orange
G24d-3
PL-C 10W, 13W PL-C 18-W PL-C 26W
DULUX D 10W, 13W DULUX D 18W DULUX D 26W
DOUBLE BIAX 10W, 13W DOUBLE BIAX 18W DOUBLE BIAX 26W
26725-211
G24d-1 G24d-2 G24d-3
PL-C 10W, 13W PL-C 18W PL-C 26W
DULUX D 10W, 13W DULUX D 18W DULUX D 26W DULUX T 26W
DOUBLE BIAX DOUBLE BIAX 18W DOUBLE BIAX 26W
4-Hole
26725-212
White w/Black Green
4-Hole
26725-213
Orange
Fluorescent Lampholders
For G24q and GX24q Lamp Bases 4-Pin — Rating: 75 WATT 600V Suitable for Dimming or Electronic Ballasts U R MOUNTING
CAT. NO.
COLOR
LAMP BASE
Bottom Snap-In For 16 Ga. Panels For 18-20 Ga. Panels For 16 Ga. Panels For 18-20 Ga. Panels For 16 Ga. Panels For 18-20 Ga. Panels
26725-401 26725-421 26725-402 26725-422 26725-403 26725-423
White w/Black Green
G24q-1
26725-419
SPECIFICATIONS AND FEATURES • “Smart” CFL Lampholders are colorcoded for easy wattage identification • Bottom snap-in versions for easier panel assembly available for 16 Ga. and 18–20 Ga. panels • All 4-pin lampholders have internal rejection feature that prevents insertion of 2-pin lamps • Metal-spring lamp-retainer clip provides positive lamp retention and is more durable than plastic clips • Two wiring ports per contact speed harness wiring • Four screw holes for greater mounting flexibility • Wire-routing options for top or bottom side of mounting panel for easier assembly • White thermoplastic body
For 16 Ga. Panels 26725-404 For 18-20 Ga. Panels 26725-424 For Universal ballast only, 26725-429 18-20 Ga. Panels
Orange
Yellow
PHILIPS
PL-C 10W, 13W G24q-2 PL-C 18W G24q-3, PL-C 26W GX24q-3 PL-T 26W, 32W 26W, 32W GX24q-4 PL-T 42W
White
G24q-3 GX24q-4
PL-T 26W, 32W, 42W
G24q-1
PL-C 10W, 13W PL-C 18W
Bottom Screw-Down 4-Hole
26725-411
4-Hole
26725-412
White w/Black Green
4-Hole
26725-413
Orange
G24q-3, GX24q-3
4-Hole
26725-414
Yellow
GX24q-4
PL-C 26W PL-T 26W, 32W PL-T 42W
4-Hole 26725-419 for Universal ballast only
White
G24q-3 GX24q-4
PL-T 26W, 32W, 42W
G24q-2
TESTING AND CODE COMPLIANCE
DULUX D/E 10W, 13W DULUX D/E 18W DULUX D/E DULUX T/E 26W DULUX T/E 42W DULUX T/E 26W, 32W, 42W
DOUBLE BIAX 10W, 13W DOUBLE BIAX 18W DOUBLE BIAX PERFORMANCE BIAX 42W TRIPLE BIAX 26W, 32W, 42W
DULUX D/E 10W, 13W DULUX D/E 18W DULUX D/E DULUX T/E 26W, 32W DULUX T/E 42W DULUX T/E 26W, 32W, 42W
DOUBLE BIAX 10W, 13W DOUBLE BIAX 18W DOUBLE BIAX 26W PERFORMANCE BIAX 42W TRIPLE BIAX 26W, 32W, 42W
Note: Lamp names are trademarked by manufacturers 1.37 (34.80)
0.15 (3.81)
0.062 (1.57)
1.36 (34.6)
0.68 (17.3)
0.267 (6.78)
1.400 (35.56)
GE LIGHTING
1.063 (27.0 )
• UL Listed (File #E-5833) • UL Listed for indoor and outdoor applications when properly enclosed • CSA Certified (File #LR-1863) • NOM Certified (File #057)
OSRAM SYLVANIA
KEYWAY
0.360 (9.14)
S
2. (3 29
0.68 (17.27) 1.40 (35.56)
RECOMMENDED MOUNTING HOLE PATTERN 0.81 (20.6)
RECOMMENDED PANEL THICKNESS 18–20 GA.
1.40 (35.56)
1.
0.560 (14.22)
7)
1.40 (35.6)
Bottom Snap-In CFLs for 18–20 Ga Panels 26725-421 Shown
4-Hole Bottom Screw-Down CFLs 26725-213 Shown
1.00 (25.4)
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 20 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V Compact Fluorescent Lampholders (CFLs) 10mm Compact Fluorescent Lampholders for High-Wattage Lamps For GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600V Suitable for Dimming or Electronic Ballasts U R CAT. NO.
COLOR
Bottom Snap-In for 16 Ga. Panels 4-Hole Bottom Screw-Down 2-Hole Bottom Screw-Down, Round Body Bottom Snap-In for 18–20 Ga. Panels Bottom Snap-In for 16 Ga. Panels 4-Hole Bottom Screw-Down 2-Hole Bottom Screw-Down, Round Body Bottom Snap-In for 18–20 Ga. Panels
26725-405
Blue
LAMP BASE GX24q-5
OSRAM SYLVANIA DULUX T/E 57W DULUX T/E 57W DULUX T/E 57W
GE LIGHTING BIAX Q/E 57W BIAX Q/E 57W BIAX Q/E 57W
26725-415
Blue
GX24q-5
26725-4A5
Blue
GX24q-5
26725-425
Blue
GX24q-5 GX24q-6
DULUX T/E 57W —
Red
GX24q-6
—
26725-4A6
Red
GX24q-6
—
BIAX Q/E 57W BIAX Q/E 70W BIAX Q/E 70W BIAX Q/E 70W
26725-406
Red
26725-416
26725-426
Red
GX24q-6
—
1.36 (34.5)
7) 2.
29
0.81 (20.6)
0.68 (17.3 )
1.12 (28.6)
BIAX Q/E 70W 26725-425
1.40 (35.6) 1.00 (25.4)
1.40 (35.6)
26725-406
(3
1.
KEYWAY
1.00 (25.4) RECOMMENDED MOUNTING SCREW #8 SELF-CUTTING
RECOMMENDED HOLE PATTERN
26725-416
4-Hole Bottom Screw-Down CFLs 26725-415 Shown 1.40 (35.6)
0.27 (6.8)
1.37 (34.8)
0.06 (1.6)
• UL Listed (File #E-5833) • UL Listed for indoor and outdoor applications when properly enclosed • CSA Certified (File #LR-1863) • NOM Certified (#057)
1.40 (35.6)
0.36 (9.1) 0.56 (14.2)
RECOMMENDED PANEL OPENING
RECOMMENDED PANEL THICKNESS — 18–20 GA. 0.036-0.047
Bottom Snap-In CFLs for 18–20 Ga Panels 26725-426 Shown
1.40 (35.6)
1.37 (34.8)
0.24 (6.2)
1.40 (35.6)
TESTING AND CODE COMPLIANCE
KEYWAY
1.51 (38.4)
• “Smart” CFL Lampholders are color-coded for easy wattage identification • Bottom Snap-In versions for easier panel assembly available for 16 Ga. and 18–20 Ga. panels • All 4-pin lampholders have internal rejection feature that prevents insertion of 2-pin lamps • Metal-spring lamp-retainer clip provides positive lamp retention • Two wiring ports per contact speed harness wiring • Wire-routing options for top or bottom side of mounting panel for easier assembly • Bodies are white thermoplastic (with color-coding as indicated) • Quick-connect push-in wiring terminals accept No. 18 AWG solid or twisted-and –overtinned leads, stripped 3/8 inch
1.40 (35.6)
SPECIFICATIONS AND FEATURES
1.51 (38.4)
0.24 (6.2)
Fluorescent Lampholders
MOUNTING
KEYWAY
RECOMMENDED PANEL THICKNESS — 18–20 GA. 0.036-0.047
26725-426
S For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
21
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
75W 600V Compact Fluorescent Lampholders (CFLs) 10mm Compact Fluorescent Lampholders with Round Bodies For G24d Lamp Bases, 2-Pin — Rating: 75 WATT 600V Bottom Screw-Down Mounting U R
26725-4A2
CAT. NO.
COLOR
26725-2A1
Black
LAMP BASE G24d-1
PHILIPS
26725-2A2
Green
G24d-2
PL-C 10W, 13W PL-C, 18W
26725-2A3
Orange
G24d-3
PL-C, 26W
OSRAM SYLVANIA DULUX D 10W, 13W DULUX D, 18W DULUX T, 18W DULUX D, 26W DULUX T, 26W
GE LIGHTING DOUBLE BIAX 10W, 13W DOUBLE BIAX 18W DOUBLE BIAX 26W
For G24q and GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600V Bottom Screw-Down Mounting — Suitable for Dimming or Electronic Ballasts U R CAT. NO.
COLOR
26725-4A1
Black
LAMP BASE G24q-1
26725-4A2
Green Green Orange Orange
G24q-2 GX24q-2 G24q-3 GX24q-3
Yellow
GX24q-4
Blue Red No color code White body only
GX24q-5 GX24q-6 G24q-3 GX24q-4
26725-4A4
26725-4A3
3
4)
3.5 )
0.63 (15.9)
1.40 (35.6)
Ø
3 1.
3. (3
0.20 (5.2
KEYWAY
Ø
PL-C, 18W PL-C, 18W PL-C, 26W PL-T 26W, 32W PL-T, 42W
DULUX D, 18W DULUX T/E, 18W DULUX D, 26W DULUX T/E 26W, 32W DULUX T/E, 42W
— — PL-T 26W, 32W 42W
DULUX T/E, 57W — DULUX T/E 26W, 32W, 42W
GE LIGHTING DOUBLE BIAX 10W, 13W TRIPLE BIAX 13W DOUBLE BIAX, 18W TRIPLE BIAX, 18W DOUBLE BIAX, 26W TRIPLE BIAX 26W, 32W PERFORMANCE BIAX 42W BIAX Q/E, 57W BIAX Q/E, 70W TRIPLE BIAX 26W, 32W, 42W
1.21 (30.8)
)
.25
0.1
4(
)
3 .3
4)
3.5
8 3.
(6.
26725-4A5
PL-C 10W, 13W
OSRAM SYLVANIA DULUX-D 10W, 13W
*For use with universal ballast only Note: Lamp names are trademarked by manufacturers
Ø0
0.94 (23.8) 1.40 (35.6)
(27
Ø 0.63 (15.9)
4(
(6.
0.1
26725-4A5 26725-4A6 1.21 26725-4A9 1.0Universal*
1.40 (35.6)
8)
.25
Ø
Ø0
Fluorescent Lampholders
26725-4A3
PHILIPS
(3
1
1.09 (27.6)
0.20 (5.2
KEYWAY
SPECIFICATIONS AND FEATURES
0.94 (23.8) 1.40 (35.6)
All Round-Body CFLs 26725-4A5 Shown
0.94 (23.8) 1.1
3(
28
4°
.6)
0.63 (15.9)
3
RECOMMENDED PANEL OPENING FOR ALL ROUND-BODY CFLs
• “Smart” CFL Lampholders are colorcoded for easy wattage identification • All 4-pin lampholders have internal rejection feature that prevents insertion of 2-pin lamps • Metal-spring lamp-retainer clip provides positive lamp retention and is more durable than plastic clips • Two wiring ports per contact speed harness wiring • Wire-routing options for top or bottom side of mounting panel for easier assembly • Bodies are white thermoplastic (with color-coding as indicated) • Quick-connect push-in wiring terminals accept No. 18 AWG solid or twistedand–overtinned leads, stripped 3/8 inch TESTING AND CODE COMPLIANCE • UL Listed (File #E-5833) • UL Listed for indoor and outdoor applications when properly enclosed • CSA Certified (File #LR-1863) • NOM Certified (#057)
S To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com 22 Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
