Preview only show first 10 pages with watermark. For full document please download

Securitron Catalog - Clark Security Products!

Rating
Date

November 2018
Size

8.8MB
Views

6,705
Categories

Industrial & lab equipment Personal safety & protection Fire protection

Transcript

Contents Icon Glossary..................................2 Locking Solutions Magnetic Locks.....................3-11 Magnetic Accessories..........12-13 Specialty Locks...................14-19 Strikes................................ 20-21 Gate Locks...............................22 Gate Lock Accessories..............23 Exit Solutions Exit Motion Sensor...................24 Touch Exit Sensor.....................25 Emergency Exit Buttons............26 Push Buttons............................27 Exit Bars............................. 28-30 Entrance Solutions Readers....................................32 Keypads............................. 33-35 Control Solutions Controller.................................36 Electronic Access Control Accessories Timers......................................37 Magnetic Switches...................38 Door Position............................39 Sounder & Latch Monitors........40 Door Prop Alarm & Keyswitch...41 Mortise Keyswitch....................42 Relay Board..............................43 Power Solutions Power Supply...................... 44-53 Power Supply Accessories.. 54-56 Power Path Solutions Power Transfers...................57-58 SECURITRON CATALOG 1-844-522-5275 | clarksecurity.com Products. Technology. Services. Delivered Globally. Icon Glossary ICON DESCRIPTION AMPERAGE Power products Amperage indicator identifies the maximum output amperage for the specified voltage ANSI A250.13-2003 WINDSTORM RESISTANT Products with an ANSI Windstorm Rating are certified and tested to perform in sustained winds or gusts of 100-to-150 miles per hour BATTERY BACKUP Supports the addition of batteries to provide backup power in case of a primary source power outage CE MARKING The CE marking is a conformity marking for certain products sold within the European Economic Area (EEA) CYLINDRICAL LOCKSETS A lock for a door prepared with one or more cross-bores and one or more edge-bores DUAL VOLTAGE Ability to select either 12 or 24 VDC in the field ENVIRONMENTAL PRODUCT DECLARATION A UL-certified Environmental Product Declaration (EPD) is a thorough, internationally harmonized report produced by a manufacturer documenting the ways a product, throughout its lifecycle, impacts the environment. FIRE-RATED Products with a Fire Rating have been evaluated and listed to UL10B, “Fire Test of Door Assemblies” and UL10C, “Positive Pressure Fire Tests with Door Assemblies”. The hourly rating qualification is also noted. GRADE 1 UL 1034: Passed requirements of 1500 lbs. static force, 70 ft. lbs of impact force and withstands 500,000 cycles of operation ANSI/BHMA A156.23: Withstands 1 million cycles MAGNACARE™ Securitron’s exclusive lifetime replacement, no fault warranty MORTISE LOCK WITHOUT DEADBOLT A lock case that fits into a prepared rectangular shaped recess in the edge or a door. Latchbolts are a spring actuated bolt, with a beveled surface, which, when aligned with the strike plate, engages it automatically. SECURICARE Three-year, no fault warranty SUPERVISION Provides contacts that support remote monitoring of power status as indicated in the product specifications UL LISTING UL Listing means that UL has tested representative samples of the product and determined that it meets UL’s requirements. These requirements are based primarily on UL’s published and nationally recognized Standards for Safety. UL LISTING UL Listing means that UL has tested representative samples of the product and determined that it meets UL’s requirements. These requirements are based primarily on UL’s published and nationally recognized Standards for Safety. This icon indicates compliance with both Canadian and U.S. requirements. VISTACARE™ One-year, no fault warranty VOLTAGE Power products voltage indicator identifies output voltage AMPERAGE FIRE RATED 3YR SECURICARE WARRANTY –2– Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M680 SERIES 1,100 lbs Holding Force CLK# Part # Description cs493461 M680BD The Smart, Stylish and Secure Magnalock® List $673.00 Standard 1100lb Magnalock w/BondSTAT and DPS, Satin Aluminum finish The M680 from Securitron delivers unsurpassed PRODUCT FEATURES: • Bracket mounting provides the easiest install for outswing doors • Innovative install templating for an effortlessly accurate alignment between magnet and armature plate • Sleek, low profile and refined lines for improved aesthetics • LED visual locked status with configurable red/green color output • BondSTAT™ lock bond sensor -Patented • Integrated door position switch • Autosensing dual-voltage with microprocessor technology • Adjustable automatic relock timer (0 to 30 seconds) • Wire chamber anti-tamper switch • Efficient, low power usage • Size optimized for use with door closers • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: • UL 1034 Burglary- Resistant Listed • UL 10C Listed • CAN4-S104, CAN/ULC Listed • UL 294 Recognized Component • ANSI/BHMA A156.23 • Grade 1, E08 501-1000 • California State Fire Marshall Listed Holding Force: intelligence, style and 1,100 lbs [499 kg] convenience. Dimensions: Intelligence. A built-in, smart M680BD Magnalock: 11-1/2”L x 2-9/16”D x 2-1/2”H Strike: 10-7/8”L x 9/16”D x 2”H voltage sensing microprocessor controls Securitron’s patented Electrical: BondSTAT and door position 550 mA (± 10%) at 12 VDC 300 mA (± 10%) at 24 VDC status monitoring. Operating Temperature: Style. The aesthetics of the +32 to +110F [0 to +43C] Indoor use only M680 are refined enough Shipping Weight: for the most discriminating designer openings. 13 lbs [5.44kg] Finishes: Convenience. An integrated US28/628 - Satin Aluminum Clear (Standard) US20A/313 - Satin Brown 335 - Satin Black US03/605 - Polished Brass US04/606 - Satin Brass US10/612 - Satin Bronze camera option provides a unique perspective for discreet surveillance and clear facial views. Easy installation. The fastest, 2-9/16" [65mm] 11-1/2" [292.1mm] easiest, most secure installation of any bracket-mount maglock. 2-1/2" [63.5mm] STANDARD 2" [51mm] 9/16" [14mm] 1-844-522-5275 | clarksecurity.com 10-7/8" [277mm] –3– Products. Technology. Services. Delivered Globally. Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M680BDX SERIES 1,100 lbs Holding Force CLK# Part # Description cs493226 M680BDX • All M680 features and standards from previous page SPECIAL PRODUCT FEATURES: $906.00 1100lb Magnalock w/BondSTAT and DPS and REX, Satin Aluminum finish PRODUCT FEATURES AND SPECIFICATIONS: • Adjustable passive infrared (PIR) request to exit (REX) › Automatically cuts power to the M680 for egress › REX output › Easily adjustable beam pattern › Adjustable relock timer The Smart, Stylish and Secure Magnalock® with Integrated Adjustable Passive Infrared Request to Exit List Dimensions: The M680BDX with integrated M680BDX Magnalock: 11-1/2”L x 3-1/8”D x 2-1/2”H Strike: 10-7/8”L x 9/16”D x 2”H request to exit (REX) provides Electrical: an approaching person so the Magnalock Power 550 mA (± 10%) at 12 VDC 300 mA (± 10%) at 24 VDC door unlocks for egress. The REX Power* detection area to be tailored optimum coverage for detecting configurability of the passive infrared (PIR) beam allows the 25 mA (± 10%) at 12 VDC 10 mA (± 10%) at 24 VDC to your environment, for *A separate continuous power input is required to power the REX better accuracy. 3-1/8" [79.4] 11-1/2" [292.1mm] 2-1/2" [63.5mm] PIR (ONLY) 2" [51mm] 10-7/8" [277mm] 9/16" [14mm] –4– Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M38 SERIES 600 lbs Holding Force CLK# Part # Description cs329639 M38 List 6 00 lbs. holding force Magnalock with automatic dual voltage. This model offers a built-in wire access chamber and bracket mount design for a unique and simplified method of installation. cs424918 TJ-38CL $401.00 Top Jamb Mounting Kit F/ M38, In swinging, Clear Anodized $179.00 PRODUCT FEATURES: • Bracket mounts easily using common tools • Internal wire access chamber • Automatic dual-voltage - no field adjustment required • Instant release circuit - no residual magnetism • Efficient, low power usage • All ferrous metal surfaces plated for durability and rust resistance • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: Bracket Mounted with Easy Installation for Interior Applications The M38 electromagnetic lock is ideal for traffic control in high-use areas within secured or monitored perimeters. Offerings Holding Force: include solutions for interior 600 lbs [272kg] rooms, closets and hallways Dimensions: where reliability, high durability Magnalock: 10-1/2”L x 1-11/16”D x 2-1/2”H Strike: 6-1/4”L x 1/2”D x 1-5/8”H and low-maintenance are Electrical: wiring chamber provide quick, 350 mA at 12 VDC 170 mA at 24 VDC accurate installation. required. Bracket mounting and Operating Temperature: • UL 10C Listed • CAN4-S104, CAN/ULC-S533 Listed • ANSI/UL 294 Listed • CSA-C22.2 No.205 Listed • ANSI/BHMA A156.23, Grade 1; E18501-500 • CSFM- California State Fire Marshal Approved • CE-EN 50081-1(92), EN 61000-6-2(99) Approved +32 to +110F [0 to +43C] Indoor use only Shipping Weight: 8 lbs [3.63kg] Finishes: TJ-38 US28/628 - Brushed Aluminum PRODUCT OPTIONS: Top Jamb - in-Swing Door Kit • (S) Senstat • (D) Integrated door position switch (DPS) • (L) LED indicator • (T) Anti-tamper switch • Available for the M38 and M68 • Used to mount the lock on the secure side of a door that swings into a secured area 2-1/4" 10-1/2" [266.7mm] • Includes a Z-Bracket and an oversized Dress Cover • MagnaCare® lifetime replacement, no fault warranty 1-11/16” [43.3mm] 2-1/2" [64mm] Fits in 2-1/4" of flat mounting space 1-844-522-5275 | clarksecurity.com –5– Products. Technology. Services. Delivered Globally. Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M68 SERIES 1,200 lbs Holding Force CLK# Part # Description cs329640 M68 List 1 200 lbs. holding force Magnalock with automatic dual voltage. This model offers a built-in wire access chamber and bracket mount design for a unique method of installation. $501.00 Bracket Mounted with Easy Installation for Higher Security Interior Applications Ideal for traffic control in high-use areas where higher security is needed, the M68 PRODUCT FEATURES: • Strong hold and low maintenance • Bracket mounts easily using common tools • Internal wire access chamber • Automatic dual-voltage - no field adjustment required • Instant release circuit - no residual magnetism • Efficient, low power usage • Rust resistant - All ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: electromagnetic lock provides Holding Force: reliability, durability and 1,200 lbs [544kg] strength with low maintenance Dimensions: and efficient power Magnalock: 10-1/2”L x 2”D x 3-5/8”H consumption. Bracket mounting Strike: 6”L x 1/2”D x 2-3/4”H and wiring chamber provide Electrical: ease of installation. 250 mA at 12 VDC 125 mA at 24 VDC • (S) Senstat • (D) Integrated door position switch (DPS) • (L) LED indicator • (T) Anti-tamper switch Operating Temperature: SPECIFICATIONS: Shipping Weight: +32 to +110F [0 to +43C] Indoor use only • UL 10C Listed • CAN4-S104, CAN/ULC-S533 Listed • ANSI/UL 294 Listed • CSA-C22.2 No.205 Listed • ANSI/BHMA A156.23, Grade 1; E18501-1000 • CSFM- California State Fire Marshal Approved • CE:EN 50081-1(92), EN 61000-6-2(99) Approved 13 lbs [5.44kg] Finishes: US28/628 - Brushed Aluminum 2-1/4" 2" [50.8mm] 10-1/2" [266mm] 3-5/8" [92mm] Fits in 2-1/4" of flat mounting space –6– Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Magnetic Locks Locking Solutions: DUAL VOLTAGE IMXDA SERIES 1,200 lbs Holding Force CLK# Part # Description cs456564 IMXDA Integrated Movement Exit Delay with Advanced Technology Magnalock Reliability with AllIn-One Exit Delay List 1200lbs holding force Magnalock with automatic dual voltage and integrated motion exit delay system $1,197.00 PRODUCT FEATURES: • Fully integrated delay and detection features for fast installation of delayed egress system • Easily adjustable door movement detection from 1/8” [3.2mm] to 1” [25mm] • Bracket mounted for ease of installation • Automatic dual-voltage - no field adjustment required • Permits free egress in emergency situations • Efficient, low power usage • Compact 12-1/2” length can be used with most door closers • BondSTAT™ magnetic bond sensor – Patented (MBS) • Easily visible LEDs indicate status on secure side of door • Advanced intelligent microprocessors provide alarm options and trainable door movement detection to minimize false alarms • Configurable settings include › Nuisance alarm times - 0 to 3 seconds › Irrevocable delay times - 15 or 30 seconds - user selectable › External bypass delay times - 0, 5, 10, or 15 seconds › Post alarm reminder - user selectable › Bypass expiration alarm - user selectable › Manual relock or delayed automatic relock (BOCA) user selectable • E xternal alarm relay isolated dry contact (1A at 24 VDC) • E xternal reset • Rust resistant - all ferrous metal surfaces plated for durability • Instant release circuit - no residual magnetism • Required sign included • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • iEXDa version allows alarm initiation via an external panic device • iMXDa-CA version is CAL Fire BML Listed • iMXDa-CH version is Chicago compliant • iMXDa-H version for HUGS® Infant Protection System 1-844-522-5275 | clarksecurity.com Prevent losses at emergency exits with iMXDa. An attempted exit initiates an alarm and a brief delay before the lock releases, giving personnel time to respond before an exit occurs. Protect memory care wards, hospitals, dormitories, airports, child care facilities and retail or warehouse environments. Used on outswing doors, installation requires no alteration or replacement of existing fire-rated or non-fire-rated latching hardware. SPECIFICATIONS: • C AN/ULC-S533 Listed • ANSI/UL 294 Listed • NFPA 101 • C SFM - California State Fire Marshal Approved (IMXDACA only) • Patents: 5,758,913; 6,609,738; 8,094,017 Holding Force: 1,200 lbs [544kg] Dimensions: Magnalock: 12-1/2”L x 2”D x 3-5/8”H Strike: 8-15/16”L x 5/16”D x 2-3/4”H Electrical: 370 mA max at 12 VDC 270 mA max at 24 VDC 2" [51mm] 8-15/16" [226mm] Operating Temperature: 5/16" [8.1mm] +32 to +104F [0 to +40C] Indoor use only Shipping Weight: 2-3/4" [70mm] 15 lbs [6.80kg] Finishes: 3-5/8" [92mm] US32D/630 - Satin Stainless Steel Finish 1" [25mm] 1" [25mm] 12-1/2" [318mm] 5/16" [8mm] 29" [737mm] 3" [76mm] 5/16" [8mm] –7– Products. Technology. Services. Delivered Globally. Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M32 SERIES M32 600 lbs Holding Force cs382872 M32 6 00 lbs. holding force Magnalock with automatic dual voltage. $368.00 The Ultimate in Magnalock® Reliability for Indoor/Outdoor Traffic Control cs404531 M32B cs449048 M32BD 6 00 lbs. holding force Magnalock with automatic dual voltage and BondSTAT $470.00 The M32 electromagnetic lock CLK# Part # Description List is ideal for traffic control in 6 00 lbs. holding force Magnalock with automatic dual voltage, BondSTAT and Door Position Sensor $529.00 high-use areas within secured cs421091 M32D 6 00 lbs. holding force Magnalock with automatic dual voltage and Door Position Sensor $436.00 or monitored perimeters. With cs382877 M32F 6 00 lbs. holding force Magnalock with automatic dual voltage and Face Drilled $368.00 unsurpassed durability, the M32 cs452412 M32-SS 6 00 lbs. Holding force Magnalock with automatic dual voltage with split strike $480.00 will last long after most buildings wear out. Applications include SPECIFICATIONS: • UL 10C Listed • C AN4-S104, CAN/ULC-S533 Listed • ANSI/UL 294 Listed • C SA-C22.2 No.205 Listed • ANSI/BHMA A156.23, Grade 1; E08501-500 • C SFM- California State Fire Marshal Approved • MEA – City of New York Approved • CE:EN 50081-1(92), EN 61000-6-2(99) Approved • Environmental Product Declaration • Health Product Declaration • Patent: 8,094,017 PRODUCT OPTIONS: storage areas, rooms, and • (B) BondSTAT™ magnetic bond sensor – Patented (MBS) • (D) Integrated door position switch (DPS) • (F) Face drilled • (SS) Split Strike Plate hallways where reliability, high durability and low-maintenance are required. Holding Force: 8” [203mm] 600 lbs [272kg] Dimensions: Magnalock: 8”L x 1-5/8”D x 1-7/8”H Strike: 6-1/4”L x 1/2”D x 1-5/8”H Split Strike: 3”L x 1/2”D x 1-5/8”H each Electrical: 1-7/8” [47mm] • Ultra-secure collapsing blind nuts mount to the door frame for strength and reliability • Fully sealed for weather-proof operations • 10 ft. [3.05m] of jacketed, stranded conductor cable • Automatic dual-voltage - no field adjustment required • Instant release circuit - no residual magnetism • Noise suppression with included MOV • Efficient, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty 1-5/8” [41mm] PRODUCT FEATURES: 6-1/4” [153mm] 2” ] 1/ m m [12 350 mA at 12 VDC 170 mA at 24 VDC Operating Temperature: /8 ” 1-5 mm] [41 2-1/4" +32 to +110F [0 to +43C] Indoor or Outdoor use Shipping Weight: 6 lbs [2.72kg] Finishes: US28/630 - Satin Stainless Steel Fits in 2-1/4" of flat mounting space –8– Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M62 SERIES M62 1,200 lbs Holding Force Part # Description cs179541 M62 cs404532 M62B cs432956 M62BD $470.00 $573.00 1200 lbs. holding force Magnalock with automatic dual voltage 1200 lbs. holding force Magnalock with automatic dual voltage and BondSTAT 1200 lbs. holding force Magnalock with automatic dual voltage and Door Position Sensor 1200 lbs. holding force Magnalock with automatic dual voltage and Face Drilled $496.00 durability, the M62 will last perimeter and exterior access control. With unsurpassed long after most buildings wear $598.00 out. Flexible mounting options 1200 lbs. holding force Magnalock with automatic dual voltage, Face Drilled, Gate Conduit with SASM Bracket 1200 lbs. holding force Magnalock with automatic dual voltage and Gate Conduit 1200 lbs. holding force Magnalock with automatic dual voltage with offset strike 1200 lbs. holding force Magnalock with automatic dual voltage with split strike PRODUCT FEATURES: • Ultra-secure collapsing blind nuts mount to door frame for strength and reliability • Fully sealed for weather- proof operations • 10 ft. [3.05m] of jacketed, stranded conductor cable • Automatic dual-voltage - no field adjustment required • Instant release circuit - no residual magnetism • Noise suppression with included MOV • Efficient, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • Fits in 2.5” of flat mounting space • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: • UL 10C Listed • C AN4-S104, CAN/ULC-S533 Listed • ANSI/UL 294 Listed • C SA-C22.2 No.205 Listed • ANSI/BHMA A156.23, Grade 1; E08501-1000 • C SFM- California State Fire Marshal Approved • MEA – City of New York Approved • CE:EN 50081-1(92), EN 61000-6-2(99) Approved • Environmental Product Declaration • Health Product Declaration • Patent: 8,094,017 support applications for hollow $563.00 $496.00 $470.00 $583.00 metal, concrete filled metal, wood, or glass with aluminum frames, and Herculite doors. PRODUCT OPTIONS: Options include single and • (B) BondSTAT™ magnetic bond sensor – Patented (MBS) • (D) Integrated door position switch (DPS) • (G) Universal threaded conduit fitting is 1/2” female – 3/4” male (Gate conduit) • (F) Face drilled • (OS) Offset Strike Plate • (SS) Split Strike Plate • (SASM) Shock Absorbing Strike Mount double door configurations, or specialty applications such as gates and fences. Holding Force: 1,200 lbs. [544kg] 8" ] [203mm Dimensions: Magnalock: 8”L x 1-3/4”D x 3”H Strike: 6”L x 1/2”D x 2-3/4”H 3" [76mm] cs971243 M62G cs971125 M62-OS cs160756 M62-SS maintain solution for interior, 1200 lbs. holding force Magnalock with automatic dual voltage, Face Drilled, Gate Conduit and BondSTAT cs457331 M62FG-SASM $631.00 $539.00 $470.00 1200 lbs. holding force Magnalock with automatic dual voltage, Face Drilled and Gate Conduit cs404533 M62FGB The M62 is a strong, easy-to- 1200 lbs. holding force Magnalock with automatic dual voltage, BondSTAT and Door Position Sensor cs430094 M62D cs971135 M62F cs971080 M62FG The Ultimate in Magnalock® Versatility for Indoor/Outdoor Higher Security List Electrical: 1 [4 -3/4 4m " m] 250 mA at 12 VDC 150 mA at 24 VDC Operating Temperature: 2-3/4" [70mm] CLK# M62FG-SASM 1 [12 /2” mm ] 6" ] [152mm -40 to +140F [-40 to +60C] Indoor or Outdoor use Shipping Weight: 11 lbs [5kg] Finishes: US32D/630 - Satin Stainless Steel 1-844-522-5275 | clarksecurity.com –9– Products. Technology. Services. Delivered Globally. Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED DM62 SERIES DM62 1,200 lbs Holding Force Double M62 Magnalock® CLK# Part # Description List cs225129 DM62 Double M62 Magnalock with automatic dual voltage cs420767 DM62B Double M62 Magnalock with automatic dual voltage and BondSTAT cs429395 DM62BD Double M62 Magnalock with automatic dual voltage, BondSTAT and Door Position Sensor $1,230.00 $914.00 $1,114.00 The Ultimate Magnalock® Double Magnet for Indoor/ Outdoor Higher Security The versatile DM62 electromagnetic lock offers strength and ease PRODUCT FEATURES: • Ultra-secure collapsing blind nuts mount to door frame for strength and reliability • Fully sealed for weather-proof operations • 3’ [1 m] of jacketed, stranded conductor cable for each lock • Automatic dual-voltage - no field adjustment required • Instant release circuit - no residual magnetism • Noise suppression with included MOV • Efficient, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • (B) BondSTAT™ magnetic bond sensor – Patented (MBS) • (D) Integrated door position switch (DPS) • (OS) Offset strike plates of maintenance for interior, Holding Force: perimeter and exterior access 1,200 lbs [544kg] per lock control - in a compact double Dimensions: magnet. This all-in-one unit is Magnalock: 22”L x 1-3/4”D x 3”H Strike: 6”L x 1/2”D x 2-3/4”H each designed for double doors with no mullion. With unsurpassed Electrical: durability, the DM62 will last 250 mA at 12 VDC/lock 150 mA at 24 VDC/lock long after most buildings wear out. Operating Temperature: -40 to +140F [-40 to +60C] Indoor or Outdoor use Shipping Weight: 16 lbs [7.26kg] Finishes: SPECIFICATIONS: US32D/630 - Satin Stainless Steel Finish • UL 10C Listed • CAN4-S104, CAN/ ULC-S533 Listed • ANSI/BHMA A156.23, Grade 1; E08511-1000 • CSFM- California State Fire Marshal Approved • Patent: 8,094,017 2-1/2" 2-3/4" [70mm] 22" ] [559mm [76 3" mm ] The DM62 with Strike fits in 2-1/2" of flat mounting space – 10 – Products. Technology. Services. Delivered Globally. 1[44 3/4" mm ] 6" ] [152mm 1 [12 /2" mm ] 6" ] [152mm 1-844-522-5275 | clarksecurity.com Magnetic Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M82 SERIES M82 1,800 lbs Holding Force CLK# Part # Description 356301 M82B Magnalock® Industrial Strength Hold for Challenging Indoor/Outdoor Environments List $660.00 1800 lbs. holding force Magnalock with automatic dual voltage and BondSTAT The M82 electromagnetic lock PRODUCT FEATURES: • Ultra-secure collapsing blind nuts mount to door frame for strength and reliability • Fully sealed for weatherproof and tamper-resistant operations • 10 ft. [3.05m] of jacketed, stranded conductor cable • Automatic dual-voltage - no field adjustment required • Instant release circuit - no residual magnetism • Noise suppression with included MOV • Efficient, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • (B) BondSTAT™ magnetic bond sensor – Patented (MBS) • (D) Integrated door position switch (DPS) • (F) Face drilled • Universal threaded conduit fitting is 1/2” female - 3/4” male • (SS) Split Strike Plates and (OS) Offset Strike Plates available offers unsurpassed magnetic Holding Force: holding strength, durability 1,800 lbs [816kg] and ease of maintenance for Dimensions: interior, perimeter and exterior Magnalock: 12”L x 1-3/4”D x 3”H Strike: 9”L x 1/2”D x 2-3/4”H access control applications in high-risk environments. With Electrical: unsurpassed durability, the M82 350 mA at 12 VDC 200 mA at 24 VDC will last long after most buildings Operating Temperature: options are available for higher wear out. Flexible mounting -40 to +140F [-40 to +60C] Indoor or Outdoor use security locations and other Shipping Weight: environments where extreme 16 lbs [7.26kg] forces may be encountered. Finishes: US32D/630 - Satin Stainless Steel SPECIFICATIONS: • UL 10C Listed • C AN4-S104, CAN/ULC-S533 Listed • ANSI/UL 294 Listed • ANSI/BHMA A156.23, Grade 1; E08501-1500 • C SFM- California State Fire Marshal Approved • CE:EN 50081-1(92), EN 61000-6-2(99) Approved • Patent: 8,094,017 1[44 3/4" mm ] 12" [305mm] 1-844-522-5275 | clarksecurity.com 2" 1/ mm] [12 The M82 with Strike fits in 2-1/2" of flat mounting space 2-3/4" [70mm] 3" [76mm] 2-1/2" 9" [229mm] – 11 – Products. Technology. Services. Delivered Globally. Magnetic Accessories Locking Solutions: CLK# Part # Description List cs971390 IK Magnalock Installation Kit cs168841 SEP-2 Fastener/Hardware Pack cs103273 BN-250 Blind Nuts 40/Pk $37.00 cs410574 SASM Shock Absorbing Strike Mount F/ M32/62/82 $65.00 cs167570 MXD-32 Door Movement Exit Delay Initiate F/M32 cs971382 HEB-1CL-8 Header Ext Bracket F/Magnalocks, 1X1X8, Clear Anodized cs367760 HEB-2CL-12 Header Ext Bracket F/Magnalocks, 2X2X12, Clear Anodized $56.00 cs481633 HEB-3CL-12 Header Ext Bracket F/Magnalocks, 3X3X12, Clear Anodized $68.00 cs971034 HEB-3CL-8 Header Ext Bracket F/Magnalocks, 3X3X8, Clear Anodized $64.00 cs105190 UHB-BK-8 8” Universal Header Bracket F/Magnalocks, Black Anodized $83.00 cs401124 UHB-CL-12 12” Universal Header Bracket F/Magnalocks, Clear Anodized cs971473 UHB-CL-8 8” Universal Header Bracket F/Magnalocks, Clear Anodized $72.00 cs424918 TJ-38CL Top Jamb Mounting Kit F/ M38, In swinging, Clear Anodized $179.00 cs971291 SFP-1/2BK-8 Stop Filler Plate F/ Magnalocks, 1/2X1-1/4X8, Black Anodized $36.00 cs214373 SFP-1/2CL-12 Stop Filler Plate F/ Magnalocks, 1/2X1-1/4X12, Clear Anodized $29.00 cs137912 SFP-1/2CL-8 Stop Filler Plate F/ Magnalocks, 1/2X1-1/4X8, Clear Anodized $25.00 cs140759 SFP-3/8CL-8 Stop Filler Plate F/ Magnalocks, 3/8X1-1/4X8, Clear Anodized $25.00 cs971309 SFP-5/8BK-8 Stop Filler Plate F/ Magnalocks, 5/8X1-1/4X8, Black Anodized $36.00 cs163495 SFP-5/8CL-8 Stop Filler Plate F/ Magnalocks, 5/8X1-1/4X8, Clear Anodized cs971523 AKG Adhesive for Glass Installations F/GDB cs971564 GDB Glass Door Bracket for Glass Installations $65.00 cs113201 HEB-3G Header Bracket for Glass Installations, 3X3X8, Clear Anodized $77.00 cs141179 ASB-32CL Aluminum Frame Spacer Bracket F/ M32, Clear Anodized $43.00 cs145062 ASB-62BK Aluminum Frame Spacer Bracket F/ M62, Black Anodized $56.00 cs146181 ASB-62CL Aluminum Frame Spacer Bracket F/ M62, Clear Anodized $43.00 cs195587 ASB-82CL Aluminum Frame Spacer Bracket F/ M82, Clear Anodized $69.00 cs439453 ASCWB-DM62CL Aluminim 1-1/2 Spacer - Concreate/Wood Bracket F/ DM62, Clear Anodized cs129756 CWB-32CL Concrete/Wood Bracket F/ M32, Clear Anodized cs112733 CWB-62CL Concrete/Wood Bracket F/ M62, Clear Anodized cs971168 AOS-62 Offset/Replacement Strike Plate F/ M62 cs128247 APS-62 Strike Plate F/ M62 $117.00 cs445148 ZA-32/62BK Adjustable Z-Bracket F/M32/62 Black Anodized $161.00 cs427175 ZA-32/62SS Adjustable Z-Bracket F/M32/62 Satin Stainless $170.00 cs148273 ZA-82SS Adjustable Z-Bracket F/M82 Satin Stainless $204.00 cs440988 TDK-1 Thick Door Kit F/Magnalocks up to 3” thick $27.00 cs971242 SB-1 Replacement Sex Bolt F/Magnalocks, Clear Anodized $12.00 cs971017 DC-32BK Dress Cover F/M32, Black Anodized $42.00 cs136295 DC-32CL Dress Cover F/M32, Clear Anodized $42.00 cs105191 DC-62BK Dress Cover F/M62, Black Anodized $42.00 $476.00 $16.00 $341.00 $40.00 IK SASM HEB Family UHB TJ-38 SFP Family $102.00 $26.00 $158.00 HEB-3G, GDB, AKG $158.00 $53.00 $60.00 ASB Family CWB Family ZA-32 / 62SS SB-1 $113.00 DC - Dress Covers – 12 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Magnetic Accessories Locking Solutions: XDT SERIES BA-XDT Exit Delay Timer XTD cs971192 BA-XDT-12 Boxed Exit Delay Timer - 12VDC, Boxed w/ Piezo Sounder and Door Label $240.00 Sophisticated Control in an Easy to Use, Modular Exit Delay Timer cs971218 BA-XDT-24 Boxed Exit Delay Timer - 24VDC, Boxed w/ Piezo Sounder and Door Label $240.00 cs971091 EXD-1L Configurable exit delay is ideal Door Label and Docs ONLY F/Exit Delay Timer cs171979 XDT-12 E xit Delay Timer ONLY - 12VDC $158.00 cs122310 XDT-24 E xit Delay Timer ONLY - 24VDC $158.00 CLK# Part # Description List $21.00 for fail safe environments that have varying needs throughout the day. Function is compatible with entry control, door/lock monitoring, and authorized immediate exit. Widely used in health- care environments to alert for patient exit and in retail PRODUCT FEATURES: • Meets all code requirements including the BOCA 30 second relock function • Nuisance delay and release times are digitally set using precise DIP switches • Three 5A SPDT relays for interface capabilities • E xternal switches such as time clocks can put the XDT into different modes when delayed exit is not desired at all times • MagnaCare® lifetime replacement, no fault warranty environments to prevent theft. PRODUCT OPTIONS: • 100 mA at 12 VDC • 50 mA at 24 VDC • XDT - board only • B A-XDT - surface mount enclosure with piezo sounder and door label • FA-XDT - flush mount plate enclosure with piezo sounder and door label SPECIFICATIONS: • ANSI/UL 294 Listed • CSFM – California State Fire Marshal Approved 2-1/2" [63mm] 5-1/4" [133mm] 5-1/4" [133mm] 1-844-522-5275 | clarksecurity.com – 13 – Products. Technology. Services. Delivered Globally. Specialty Locks Locking Solutions: DUAL VOLTAGE FIRE RATED MM15 MEMLOCK™ and Accessories MM15 4,000 lbs Holding Force CLK# Part # Description cs405978 MM15 cs429911 MM15DT Unique Hybrid Design, Two Tons of Holding Power List 4000lb Hybrid Electro-Mechanical, automatic dual voltage $431.00 $528.00 cs478316 Z-MM15CL Z-Bracket Kit F/ MM15, Clear Anodized $101.00 cs432952 HEB-1CL-MM15 1” Header Extention Bracket F/ MM15, Clear Anodized $37.00 cs432954 HEB-3CL-MM15 3” Header Extention Bracket F/ MM15, Clear Anodized $37.00 cs432957 SFP-1/2CLMM15 1/2” Stop Filler Plate F/ MM15, Clear Anodized $29.00 cs432958 SFP-5/8CLMM15 5/8” Stop Filler Plate F/ MM15, Clear Anodized $31.00 PRODUCT FEATURES: • 4,000 lbs holding power • Mounting plate for easy, accurate installation • Automatic dual-voltage (12/24V) • Accepts AC or DC current • Fail safe • Ideal for mental health care and auxiliary detention facilities and other high-risk locations • MagnaCare® lifetime replacement, no fault warranty • (D) Integrated door position switch (DPS) • ( T) Anti-tamper switch • (G) 1/2” conduit ready lock includes two springloaded, hardened steel jaws that deliver up to 4,000 lbs of ultimate holding power. In a forcedentry assault, the jaws of the MM15 MEMLOCK clamp down on the armature plate and hold Holding Force: firm, for an unmatched level of 4,000 lbs [1814 kg] access control. Dimensions: 6”L x 1-7/8”D x 2-3/4”H Electrical: AC Current: 130 mA at 12 VAC; 250 mA at 24 VAC Operating Temperature: -40 to +140F [-40 to +60C] Indoor use only Shipping Weight: SPECIFICATIONS: • UL 10C Fire Rated, 1 hour • C AN/ULC-S533 Listed • Patent: 6,902,214 6 lbs [2.72kg] Finishes: US26D/626 - Brushed Stainless 2-3/4" [70mm] magnetic electromechanical DC Current: 100 mA at 12 VDC; 200 mA at 24 VDC PRODUCT OPTIONS: 5-1/8" [130mm] The hybrid design of this 4 000lb Hybrid Electro-Mechanical, automatic dual voltage, door position sensor and anti-tamper switch 2-9/16" [65mm] 1/4" [6mm] 1-3/8" [35mm] 1-1/8" [28mm] 3-7/8" [98mm] 3-5/8" [92mm] 1/16" [1.6mm] 1-7/8" [48mm] 6" [152mm] – 14 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Specialty Locks Locking Solutions: SAM FIRE RATED 1,200 lbs Shear Aligning Magnalock® SAM2-24 600 lbs Shear Aligning Magnalock® Part # Description cs162052 SAM cs425853 SAMB cs432341 SAMBD cs437838 SAMD cs267470 SAM2-24 cs103664 SMLS cs103670 SMSS List 1200lb Shear Aligning Magnalock, 12/24VDC, Self Aligning 1200lb Shear Aligning Magnalock, 12/24VDC, Self Aligning and BondSTAT 1200lb Shear Aligning Magnalock, 12/24VDC, Self Aligning, BondSTAT and Door Position Sensor 1200lb Shear Aligning Magnalock, 12/24VDC, Self Aligning, and Door Position Sensor 600lb Shear Aligning Magnalock, 24VDC, Mini Version SAM Surface Mount Housing Locking Kit - Shear SAM Surface Mount Housing Strike - Shear PRODUCT FEATURES: SAM • Recessed for aesthetically appealing finish • Fully sealed for weather-proof operations • 10 ft. [3.05m] of jacketed, stranded conductor cable • Automatic dual-voltage - no field adjustment required • Instant release circuit -no residual magnetism • Noise suppression with included MOV • Efficient, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • (B) BondSTAT™ magnetic bond sensor – Patented (MBS) • (D) Integrated door position switch (DPS) SPECIFICATIONS: • UL 10C Listed • C AN4-S104, CAN/ ULC-S533 Listed • ANSI/UL 294 Listed • ANSI/BHMA A156.23, Grade 1; E08561-1000, E08571-1000, E08581-1000, E08591-1000 • C SFM - California State Fire Marshal Approved • CE:EN 50081-1(92), EN 61000-6-2(99) Approved • US Patents: 6,007,119; 6,135,515; 8,094,017 • Foreign Patents: AU:741,880; China: ZL98809925.X; EU: 1,021,633 Holding Force: 1,200 lbs [544kg] Dimensions: Magnalock: 10-7/8”L x 1-3/16”D x 1-1/2”H Strike: 10-7/8”L x 1-7/16”D x 1-1/2”H Electrical: 320 mA at 12 VDC, 170 mA at 24 VDC Operating Temperature: -40 to +140F [-40 to +60C] Indoor or Outdoor use, not for use in open channel doors Shipping Weight: 6 lbs [2.72kg] Finishes: US32D/630 – Satin Stainless Steel Finish FIRE RATED SAM2-24 SAM and Accessories CLK# DUAL VOLTAGE $873.00 $950.00 $1,006.00 $930.00 $688.00 $162.00 $157.00 SAM2-24 PRODUCT FEATURES: • Direct mount to door frame for strength and reliability • Compact design fits tight spaces • Fully sealed for weatherproof operations • 6 ft.[1.8m] of jacketed, stranded conductor cable • Noise suppression with included MOV • Instant release circuit - no residual magnetism • Efficient, low-voltage, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: • UL 10C Listed • C AN4-S104, CAN/ ULC-S533 Listed • ANSI/UL 294 Listed • ANSI/BHMA A156.23, Grade 1; E08571-1000, E08581-500 • C SFM - California State Fire Marshal Approved • US Patents: 6,007,119; 6,135,515 • Foreign Patents: AU:741,880; China: ZL98809925.X; EU: 1,021,633 Holding Force: 600 lbs [272kg] Dimensions: 7-3/16”L x 1-1/8”D x 1”H Electrical: 62 mA at 24 VDC only Operating Temperature: -40 to +140F [-40 to +60C] Indoor or outdoor use, not for use in open channel doors Shipping Weight: 2.5 lbs [1.13kg] Finishes: US32D/630 - Satin Stainless Steel SAM2-24 - Hidden Strength at Any Angle Ideal for Traffic Control The compact and versatile SAM2-24 Shear Aligning Magnalock provides 600 lbs of holding force to swinging or sliding doors. It is ideal for traffic control and to secure smaller applications, like sliding closet doors, atriums, and more. The SAM2-24 mounts fully concealed into wood, steel, aluminum or Herculite doors in any position: at the header, door edge or threshold. SAM - Hidden Strength at Any Angle for Any Application This concealed Magnalock is ideal for traffic control or medium security and with its flexible mounting options solutions the most challenging door control situations. The SAM Shear Aligning Magnalock has mounting options for a single door or each leaf on a pair of doors and can be on a sliding, in-swing, out-swing or swing-through door. It mounts fully concealed into wood, steel, aluminum or Herculite doors in any position: at the header, door edge or threshold. SAM Surface Mount Kit: • For specialty applications • Permits the SAM magnet, strike or both to be surface mounted when mortising is not possible • Stainless steel • MagnaCare® lifetime replacement, no fault warranty – 15 – Products. Technology. Services. Delivered Globally. Specialty Locks Locking Solutions: DUAL VOLTAGE FIRE RATED M34R SERIES M34R 500 lbs Holding Force CLK# Part # Description cs202763 M34R List $388.00 Recessed Magnalock F/Sliding Door Applications PRODUCT FEATURES: • Recessed for aesthetically appealing finish • Fully sealed for weather-proof operations • 10 ft. [3.05m] of jacketed, stranded conductor cable • Automatic dual-voltage - no field adjustment required • Instant release circuit - no residual magnetism • Noise suppression with included MOV • Efficient, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: • UL 10C Listed • CAN4-S104, CAN/ULC-S533 Listed • UL 294 Recognized Component • CSFM- California State Fire Marshal Approved • CE:EN 50081-1(92), EN 61000-6-2(99) Approved • Patent: 8,094,017 Recessed Magnalock® for Traffic Control on a Sliding Door The M34R secures single Holding Force: sliding doors with Magnalock 500 lbs [227kg] strength for traffic control Dimensions: applications within a monitored Magnalock: 10-1/2”L x 1-1/8”D x 1-1/2”H Strike: 6-3/8”L x 1/2”D x 1-7/16”H perimeter. The recessed design Electrical: comes against the frame when 320 mA at 12 VDC 170 mA at 24 VDC the door is closed conceals the Operating Temperature: that blends with the aesthetics on the edge of the door that maglock for hidden protection -40 to +140F [-40 to +60C] Indoor or Outdoor use Shipping Weight: of the opening. Works great on automatic single sliding doors or on sliding doors for patios, 5 lbs [2.23kg] storage closets and more. Finishes: 1-7/16" [37mm] US32D/630 - Satin Stainless Steel 1 [13 /2" mm ] 1-1/ [28 8" mm ] 6-3/8" [162mm] 10 [26 -1/2" 8m m] " /2 ] 1-1 8mm [3 – 16 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Specialty Locks Locking Solutions: MCL 200 lbs Holding Force Cabinet Magnalock® CLK# MCL Part # Description cs234352 MCL-24 List $226.00 Compact Magnalock PRODUCT FEATURES: • Direct mount or bracket mount with common tools for easy installation • Fully sealed for weather-proof operation • Universal bracket included to support a variety of applications • Sealed 6 ft. [1.8m] jacketed, stranded conductor cable • Efficient, low power usage • Rust resistant - all ferrous metal surfaces plated for durability • MagnaCare® lifetime replacement, no fault warranty Holding Force: Compact Magnalock Quality for Versatile Asset Management The compact MCL Magnalock 200 lbs [91kg] is ideal for extending access Dimensions: control to all types of asset Magnalock: 4-5/8”L x 3/4”D x 1-1/8”H Strike: 3-1/8”L x ¼”D x 1-1/8”H protection. Typical applications Electrical: museum cases, gun cabinets, include jewelry cases, 62 mA at 24 VDC only pharmaceutical storage Operating Temperature: cabinets, cash drawers and -40 to +140F [-40 to +60C] Indoor or outdoor use any swinging or sliding door Shipping Weight: or drawer that needs asset control – indoors or out. 1.5 lbs [0.68kg] Finishes: US32D/630 - Satin Stainless Steel 4 -5/8" [117mm] 1-1/8 " [2 9 m m] " 3/4 m] m [19 1-1/8 [2 9 m " m] 1/4" [6mm] Swinging Door 1-844-522-5275 | clarksecurity.com 3 -1/8" [79mm] Sliding Door – 17 – Products. Technology. Services. Delivered Globally. Specialty Locks Locking Solutions: DUAL VOLTAGE FIRE RATED VM600 SERIES and Accessories VM600 600 lbs Holding Force cs434800 VM600 600lb Vista Magnetic Lock, Dual Voltage $166.00 An Affordable Securitron Maglock for Interior Applications cs456270 VM600DB 600lb Vista Magnetic Lock, Dual Voltage, Door position and bond sensor $187.00 cs434939 ASB-VM600 $33.00 The affordable VM600 Aluminum Spacer Bracket F/ VM600 cs434941 HEB-VM600 Header Extension Bracket F/ VM600 $54.00 cs434948 SFP-VM-1/2-CL 1/2” Stop Filler Plate for Vista Magnetic Locks, Clear Anodized $27.00 cs434959 Z-VM600 Z-Bracket Kit F/ VM600 CLK# Part # Description List $118.00 offers traffic control for a wide selection of interior applications. Its field-selectable dual-voltage and easy bracketmount installation delivers PRODUCT FEATURES: • Adjustable bracket for easy installation • Wire access chamber with plug-in connectors • Dual-voltage 12/24 VDC • Instant release mechanism • Rust resistant - all ferrous metal surfaces plated for durability • VistaCare® one year, no fault warranty PRODUCT OPTIONS: • (B) BondSTAT™ magnetic bond sensor – Patented (MBS) • (D) Integrated door position switch (DPS) SPECIFICATIONS: • UL 10C Fire Rated, 1 hour • CAN4-S104 Listed • NFPA 101 Holding Force: Securitron value in a no-frills 600 lbs [272kg] value package. Dimensions: Lock: 9-3/8”L x 1 -1/16”D x 1-7/8”H Strike: 7-1/4”L x 1/2”D x 1-1/2”H Electrical: 520 mA at 12 VDC 260 mA at 24 VDC Operating Temperature: +32 to +110F [0 to +43C] Indoor use only Shipping Weight: 5 lbs [2.27kg] Finishes: US28/628 - Brushed Aluminum 1-7/8" [48mm] 9-3/8" [238mm] 1-1/16" [27mm] – 18 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Specialty Locks Locking Solutions: DUAL VOLTAGE FIRE RATED VM1200/VM1290 SERIES and Accessories VM1200 1,200 lbs Holding Force CLK# $253.00 Value and Strength in a No-Frills Package –Retrofits Competitive Footprint 1200lb Vista Magnetic Lock, Dual Voltage with Door Position and Bond Sensor $275.00 $253.00 Get Vista Maglock value with 1200lb Vista Magnetic Lock, Dual Voltage W/ Retrofit Bracket for Locknetics 390 Lock Part # Description List cs434798 VM1200 1200lb Vista Magnetic Lock, Dual Voltage cs464935 VM1200DB cs442820 VM1290 cs488652 VM1290DB 1200lb Vista Magnetic Lock, Dual Voltage with Door Position and Bond Sensor amd $275.00 Retrofit Bracket for Locknetics 390 Lock cs434691 ASB-VM1200 Aluminum Spacer Bracket F/ VM1200 $39.00 cs104431 GDB-VM1200 Glass Door Bracket F/ VM1200 $80.00 cs434940 HEB-VM1200 Header Extension Bracket F/ VM1200 $64.00 cs434948 SFP-VM-1/2-CL 1/2” Stop Filler Plate for Vista Magnetic Locks, Clear Anodized $27.00 cs434957 Z-VM1200 Z-Bracket Kit F/ VM1200 PRODUCT FEATURES: • Easy mount adjustable bracket • Wire access chamber with plug-in connectors • Dual-voltage 12/24 VDC • Instant release mechanism • All ferrous metal surfaces plated for durability • Retrofits Locknetics 390+ using existing mounting holes (VM1290) • VistaCare® one year, no fault warranty PRODUCT OPTIONS: • (B) BondSTAT™ magnetic bond sensor – Patented (MBS) • (D) Integrated door position switch (DPS) SPECIFICATIONS: • UL 10C Fire Rated, 1 hour • CAN4-S104 Listed • NFPA 101 $139.00 1,200 lbs. of holding force to secure interior and sheltered perimeter doors. The VM1290 is a direct retrofit for the Locknetics 390+ Maglock, complete with a specialized mounting plate to use with existing mounting holes. Holding Force: 1,200 lbs [544kg] Dimensions: Lock: 10-1/2”L x 1-9/16”D x 2-7/8”H Strike: 7-5/8”L x 5/8”D x 2-3/8”H Electrical: 520 mA at 12 VDC 260 mA at 24 VDC Operating Temperature: +32 to +110F [0 to +43C] Indoor use only Shipping Weight: 8 lbs [3.63kg] 2-7/8" [73mm] Finishes: US28/628 - Brushed Aluminum 10-1/2" [266.7mm] 1-9/16" [39.7mm] 1-844-522-5275 | clarksecurity.com – 19 – Products. Technology. Services. Delivered Globally. Strikes Locking Solutions: FIRE RATED UNL UnLatch Strike CLK# Part # Description List cs182213 UNL-24 UnLatch Strike F/ Cylindrical Locks, 24VDC cs142531 TP-24-2 Plug in Transformer F/ UNL and MUNL Locks PRODUCT FEATURES: • No cutting or altering of the jamb required • Fail secure • Releases under preload • Supports deadlatch function • Fits standard ANSI 4-7/8” strike cutout • Motor driven action • Latch status sensor included (SPDT) • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • 12 VDC • 24 VDC • FSUNL for field-selectable fail safe operation SPECIFICATIONS: • UL 10C Listed, 3 hour single door • CAN4-S104, CAN/ULC Listed • NFPA-252 fire door compliant • UL listed to ANSI/ SDI-BHMA A250.13 (60 PSI) Windstorm • ANSI/BHMA A156.31, Grade 1; E09321, E09322, E09323 • ASTM-E152 fire door compliant • Patents: 5,474,342; 6,022,056 $400.00 $39.00 Holding Force: UNL 1,500 lbs [680kg] static Current Draw: 12 VDC: 40 mA continuous, minimum 300 mA when operating 24 VDC: 40 mA continuous, minimum 200 mA when operating Higher capacity supply (1-3As) is recommended for startup inrush to achieve best operation under pre-load Operating Temperature: The universal electromechanical UNL strike works with most North -20 to +125F [-29 to +52C] American cylindrical locksets, Shipping Weight: with or without deadlatches. The UNL supports full 1.6 lbs [0.73kg] deadlatch function, releases Finishes: under pressure and includes US32D/630 - Satin Stainless Steel US10B/613 - Oil Rubbed Bronze 1-1/2" [38mm] latch status monitoring. Strong 1-15/16" [33mm] enough to withstand windstorm conditions, the UNL provides Grade 1 holding power and is UNL TP-24-2 Windstorm-Rated, Preload-Handling Electromechanical Strike 3-3/8" [86mm] UL listed and fire-rated. BPS-12-1 or BPS-24-1 with battery backup or an AQD3 3A/1.5A 12/24 VDC power supply output recommended for startup inrush to achieve best operation when used in preload conditions – 20 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Strikes Locking Solutions: FIRE RATED MUNL Mortise UnLatch Strike CLK# Part # Description List cs233212 MUNL-24 UnLatch Strike F/ Mortise Locks, 24VDC cs142531 TP-24-2 Plug in Transformer F/ UNL and MUNL Locks PRODUCT FEATURES: • No cutting or altering of the jamb required • Fail secure • Releases under preload • Fits standard ANSI 4-7/8” strike cutout • Motorized, no solenoids • Fully concealed installation • Maintains dead latch function at all times • Continuous duty • Latch status sensor is standard • One model works with most North American Mortise Locks (Sargent 7800 and 8200 require tab kit model #STK-1 for retrofit installations) • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • 12 VDC • 24 VDC • FSUNL for field-selectable fail safe operation $562.00 $39.00 Holding Force: 1,500 lbs [680kg] static MUNL Current Draw: Windstorm-Rated, PreloadHandling Strike for Mortise Locksets 12 VDC-40 mA continuous, minimum 700 mA when operating 24 VDC-40 mA continuous, minimum 500 mA when operating Higher capacity supply (1-4As) is recommended for startup inrush to achieve best operation under pre-load Mortise UnLatch is for any Operating Temperature: application where an electric -20 to +125F [-29 to +52C] strike would be used for Shipping Weight: a mortise type lock. The 2 lbs [0.91kg] Mortise UnLatch includes Finishes: field adjustability for latch and US32D/630 - Satin Stainless Steel US10B/613 - Oil Rubbed Bronze US03/605 - Polished Brass under pressure and includes a deadlatch positions, releases latch status monitoring output. 1-7/8" [48mm] SPECIFICATIONS: • UL10C Listed • CAN4-S104, CAN/ULC Listed • ANSI/BHMA A156.31, Grade 1; E09321, E09322, E09323 • NFPA-252 fire door compliant • ASTM-E152 fire door compliant • UL listed to ANSI/ SDI-BHMA A250.13 (60 PSI) Windstorm • Patents: 6,022,056; 6,581,991; 6,902,214 1-3/4" [32mm] 3-5/8" [92mm] TP-24-2 1-844-522-5275 | clarksecurity.com – 21 – Products. Technology. Services. Delivered Globally. Gate Locks Locking Solutions: DUAL VOLTAGE GL1 2,000 lbs Holding Force Gate Lock GL1 cs104131 GL1-FL 2000lb Holding Force Gate Lock, 12/24VDC, Standard Fail Locked/Secure $346.00 Electromechanical Gate Solution Offers One Ton of Holding Power cs104133 GL1-FS 2000lb Holding Force Gate Lock, 12/24VDC, Standard Fail Unlocked/Safe $346.00 The heavy duty GL1 CLK# Part # Description List Electromechanical Gate Lock PRODUCT FEATURES: • 2,000 lbs holding force • Operates under preload up to 100 lbs • Automatic dual-voltage - no field adjustment required • Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below) • Self-aligning receiver (+/- 1/2” horizontally) helps compensate for gate misalignment and sag • Tamper resistant cast housing • Optional latch status monitor • Surface mount • MagnaCare® lifetime replacement, no fault warranty Holding Force: provides weather-resistant 2,000 lbs [907kg] access control for a wide Dimensions: range of gate applications. The GL1 provides 2,000 lbs of 2-3/4”L x 7-1/4”W x 3-1/4”D holding force for electrical and Electrical: manually operated indoor or 12 Volts Initial (Peak): (~1.0 sec.) at 870 mA - Reduced: 290 mA Power Consumption: 3.5 Watts outdoor gates where preload is 24 Volts Initial (Peak): (~1.0 sec.) at 720 mA - Reduced: 170 mA Power Consumption: 4.1 Watts sliding vehicle, pedestrian, or a concern. Ideal for swinging or stock gate access control. Operating Temperature: SPECIFICATIONS: -58 to +167F [-50 to +75C] Indoor or outdoor use • Patent: 8,047,582 Shipping Weight: 6 lbs [2.72kg] 2-11/16" [69mm] Finishes: Black Finish 2-1/8" [54mm] 2-13/16" [71mm] 7-1/4" [184mm] GL1 with FMK-SL for sliding gates – 22 – Products. Technology. Services. Delivered Globally. GL1 with FMK-SW for swinging gates 3-3/16" [81mm] 2-3/4" [70mm] 1-844-522-5275 | clarksecurity.com Gate Lock Accessories Locking Solutions: FMK Flex-Mount Gate Lock Bracket Kits CLK# Part # Description List cs430277 FMK-SL GL1 Flex Mount kit for sliding gates $105.00 cs430279 FMK-SW GL1 Flex Mount kit for swinging gates $130.00 cs435885 FMB9-4 GL1 Post Shim Kit for Flex Mount Brackets (set of 4) PRODUCT FEATURES: $21.00 NOTES: • Permits electronics to be mounted on fence posts or gate posts • Brackets are reversible • Bracket kits include brackets, mounting hardware and post shims • Post brackets are pre-drilled • Zinc-plated steel provides durability and long life • Bolt on or weld for installation • Compatible with maximum 3” round post with minimum pole separation of 1” • Use with Post Shim Brackets for smaller post sizes • MagnaCare® lifetime replacement, no fault warranty • M62FG can be direct mounted on square posts • To use FMK-SL with M62FG-SASM, post separation should be 1” to 2-1/4” • To use FMK-SW with M62FG or the GL1, post separate should be 1” to 2-3/4” • To use FMK-SL with GL1 or M62FG, post separation should be 1” to 3-3/4” FMK-SL Shipping Weight: 7 lbs [3.18kg] FMK-SW Sliding Gate Bracket Kits Extend Access Control to Gates and Fences The FMK Flex-Mount Bracket System is an intuitive set of mounting brackets designed exclusively for use with the M62FG Magnalock® and the GL1 Gate Lock. Pre-formed post channels and plates of varying lengths make it easy for you to assemble a professional looking, high-security gate lock mounting platform in minutes, without special tools. FMK-SL shown with M62FG FMK-SL shown with GL1 1-844-522-5275 | clarksecurity.com FMK-SW shown with M62FG FMK-SW shown with GL1 – 23 – Products. Technology. Services. Delivered Globally. Exit Motion Sensor Exit Solutions: XMS Exit Motion Sensor CLK# XMS Part # Description cs146727 XMS Versatile Motion Detection for Hands-Free Exit Request List Exit Motion Sensor, Hands Free Exit Request $216.00 The XMS passive infrared (PIR) motion sensor reliably detects motion near a door and releases its magnetic lock. Versatile mounting options and PRODUCT FEATURES: an easily adjustable infrared • Passive infrared (PIR) request to exit (REX) device • Automatically and reliably cuts power to the lock with no human intervention • REX output • Easily adjustable beam pattern • Adjustable time relock • MagnaCare® lifetime replacement, no fault warranty beam pattern provide optimal coverage of the egress area for smooth, hands-free lock release and exit. SPECIFICATIONS: • ANSI/UL 294 Listed Dimensions: 7”L x 1-7/8”W x 1-3/4”H Indoor use only Electrical: 20 mA-50 mA (depending on switching status) at 12 VDC or 24 VDC Shipping Weight: 0.5 lbs [0.23kg] Safety Note: Securitron recommends that an emergency exit button, such as the EEB, be used in conjunction with the XMS to meet applicable building codes and specific life safety issues. 7" [178mm] 1.75" [44mm] 1.87" [48mm] – 24 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Touch Exit Sensor Exit Solutions: SP-1 Touch Sense® Plate CLK# Part # Description cs271267 SP-1 List $177.00 Touch Sensor Plate PRODUCT FEATURES: • DPST 2A rated relay • Internal 0-25 second timer • Backup push button • MagnaCare® lifetime replacement, no fault warranty Dimensions: 3-3/16”L x 1-1/2”D x 5-3/4”H SP-1 Electrical: 40 mA at rest; 25 mA releasing at 12 VDC or 24 VDC +32 to +110F [0 to +43C] Indoor use only Touch Sense Technology in a Wall-Mount Request to Exit Plate Shipping Weight: The SP-1 uses touch sensing 1.5 lbs [0.68kg] technology to create a push Finishes: plate with no moving parts. Operating Temperature: For indoor use only, the unit is US32D/630 - Satin Stainless Steel oversized to cover a single gang cutout. Ideal to assist with ADA compliance, the unit includes a three-part vinyl “Touch to Exit” decal. A red LED is 3-3/16" [81mm] incorporated into the backbox. 5-3/4" [146mm] 1-1/2" [38mm] 1-844-522-5275 | clarksecurity.com – 25 – Products. Technology. Services. Delivered Globally. Emergency Exit Buttons Exit Solutions: DUAL VOLTAGE EEB Emergency Exit Buttons CLK# Part # Description List cs169124 EEB2 Exit Button W/ 30sec. Timer - Single Gang, Green/Red/Handicap $135.00 cs180790 EEB3N-G Exit Button W/ 30sec. Timer - Narrow Stile, Green/Red $135.00 EEB2 PRODUCT FEATURES: • Backup device in case of exit sensor failure per BOCA, NFPA, IBC, and VBC code • SPST 3A wet N/C contacts • Momentarily pressing the EEB releases the door for 30-seconds • Re-triggerable for added 30-second release • Field-selectable 12 VDC or 24 VDC to match lock voltage • Interchangeable green and red lenses included standard • MagnaCare® lifetime replacement, no fault warranty Request to Exit Device MagLock PRODUCT OPTIONS: • Single gang • Narrow stile • EEB2 includes standard lenses plus blue ADA lens • Illumination kits EEB3N-G Redundant Backup Ensures Safe Egress EEB2 Install the EEB Emergency SPECIFICATIONS: Exit Button next to the door to (EEB2, EEB3N ONLY) provide additional safety and • ANSI/UL 294 Listed • C SA-C22.2 No.205 Listed • C SFM – California State Fire Marshal redundancy as required by code when using a motion detector for a request-to-exit device. Note: Securitron’s UL294 certification indicates that when the EEB is used with the XMS Motion Sensor, it meets the NFPA Life Safety Code 101 requirements for exit of access-controlled egress doors. – 26 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Push Buttons Exit Solutions: PB Push Buttons CLK# PB Part # Description cs440339 PB2-LK 235850 PB cs185058 PBA-G cs106498 PB2 cs245291 PB22 cs971416 PB2E cs971129 PB3E cs971114 PB3EN cs146186 PB3ER cs971200 PB3N cs460745 PB4L-2 cs479058 PB4LA-2 cs337228 PB4LN-2 cs197514 PB5 cs155961 PB5E cs248453 WBB cs118916 WCC PB2 PB3E PB3EN PB3N List $27.00 $150.00 1-1/2” Round Alternating Illuminated Push Button, DPST W/ Red and Green Lens $150.00 2” Push Button, Momentary, Single Gang, Illuminated, Green/Red/Handicap Lens, SPDT $96.00 2” Push Button, Momentary, Single Gang, DP W/Light, Green/Red/Handicap Lens, SPDT $150.00 2” Push Button, Momentary, Single Gang, Green/Red/Handicap Lens, SPDT $67.00 Push Button, Momentary, Single Gang, Green/Red Lens $76.00 Push Button, Momentary, Narrow Stile, Green/Red Lens $76.00 Push Button, Remote momentary, Surface Mount, Green/Red Lens $76.00 Push Button, Momentary, Narrow Stile, Green/Red Lens, Illuminated $96.00 Push Button Vandal-Resistant Stainless W/ Illuminated Halo, Momentary, Single Gang $128.00 Push Button Vandal-Resistant Stainless W/ Illuminated Halo, Alternate, Single Gang $128.00 Push Button Vandal-Resistant Stainless W/ Illuminated Halo, Momentary, Narrow Stile $128.00 2” Round Push Button, Momentary, SPDT, w/ Light, Single Gang, Red/Green/Handicap Lens $118.00 2” Round Push Button, Momentary, SPDT, NO Light, Single Gang, Red/Green/Handicap Lens $86.00 Weather Back Box for Single Gang Push Buttons $34.00 Clear Weather Cover for Single Gang Push Buttons $47.00 Illumination Kit F/ PB2E, PB5E and EEB2 1-1/2” Round Momentary Illuminated Push Button, DPST W/ Red and Green Lens PB4L-2 PB5 Securitron® Quality with a Wide Range of Options for Size, Color and Function High-quality Securitron Push Buttons are available in a broad selection of colors, sizes, switch types and outputs. With a wide range of options for interchangeable lenses and field PB SERIES » Medium Round Illuminated • 7A rated contacts • Includes interchangeable green and red lenses • Red LED on plate • Stainless steel single gang plate: 4-1/2” x 2-3/4” [114mm x 70mm] • MagnaCare® lifetime replacement, no fault warranty PB2 SERIES » Large Square • Easy to read 2” size • 5A rated contacts • Includes interchangeable green, red and blue ADA lenses • Stainless steel single gang plate: 4-1/2” x 2-3/4” [114mm x 70mm] • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • Standard or Illuminated • Single Pole-Double Throw • Double Pole-Double Throw • Red LED on plate 1-844-522-5275 | clarksecurity.com PB3 SERIES » Assorted Sizes and Colors with a Uniform Look • 3A rated contacts • Includes interchangeable green and red lenses • Field convertible from DPST to DPDT • MagnaCare® lifetime replacement, no fault warranty convertible outputs, Securitron push buttons can release any maglock, alone or in conjunction with door closers and other hardware. PRODUCT OPTIONS: • Stainless steel single gang plate: 4-1/2” x 2-3/4” [114mm x 70mm] • Stainless steel narrow stile plate (N): 4-1/2” x 1-3/4” [114mm x 44mm] • Black plastic surface mount (R): 3-7/8” x 2” [98mm x 51mm] • Red LED on plate; for no LED select (E) • Momentary or for Alernate select (A) • Ilumination Light Kit (LK) WBB WCC PB4L SERIES » Stainless Push Button with Illuminated Halo • 4 A rated contacts • Illuminated green halo-style button • Bi-color LED • Tamper resistant • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • Stainless steel single gang plate: 4-1/2” x 2-3/4” [114mm x 70mm] • Stainless steel narrow stile plate: 4-1/2” x 1-3/4” [114mm x 44mm] PB5 SERIES » easy to Read Large Round • 5A rated contacts • Includes interchangeable green, red and blue ADA lenses • Stainless steel single gang plate: 4-1/2” x 2-3/4” [114mm x 70mm] • Field convertible from DPST to DPDT • MagnaCare® lifetime replacement, no fault warranty – 27 – Products. Technology. Services. Delivered Globally. Exit Bars Exit Solutions: DUAL VOLTAGE DSB DSB Dual Sense® Bar cs116207 CAB-6 16 Foot, 6 Conductor, Cable with Connector cs448387 DSB-BK 36” Dual Sense Bar, Black Anodized $479.00 Dependable Touch and Mechanical Release for Superior Safety and Redundancy cs451379 DSB-CL 36” Dual Sense Bar, Clear Anodized $469.00 The dependable DSB Dual cs103561 EL-DSB-CL Electrolynx 36” Dual Sense Bar, Clear Anodized $505.00 Sense Bar is the most reliable cs466152 EMB-BK 36” Electromechanical Release Bar, Black Anodized $264.00 exit device available for cs477073 EMB-CL 36” Electromechanical Release Bar, Clear Anodized $252.00 magnetically locked, non-fire- cs271267 SP-1 Touch Sensor Plate $177.00 rated doors. Its unique design cs323601 TS-4R Replacement Touch Sensor Board for Tubular Style Bar $145.00 delivers superior fault tolerance cs323294 TS-4RLS Replacement Touch Sensor Board for Tubular Style Bar - Low Sensitivity $145.00 with two independent, cs128385 TSH-CL Touch Sense Handle, Push/Pull, Clear Anodized $406.00 redundant switch circuits for cs479987 WEMB-CL 36” Weatherized Electromechanical Release Bar, Clear Anodized $279.00 releasing the lock. The DSB CLK# Part # Description PRODUCT FEATURES: • Redundant switches • Release triggered by either 1/8” mechanical movement or reliable touch sense technology • Resistant to interference from radio frequency or electromagnetic frequency and external impact/bounce attempts • All metal construction • Can be field cut to fit non-standard door widths • 16 ft. [4.8m] 22AWG 6 conductor cable and armored door cord included • Automatic dual-voltage 12 VDC or 24 VDC • Resists electrostatic discharge up to 27,000 volts • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • 36” (914mm) Length • 42” (1,067mm) Length • 4 8” (1,219mm) Length • (EL) ElectroLynx® ready • (I) Illuminated via fiber optics • Through-bolt kit for doors 1-3/4” to 2-1/4” thick List $61.00 can be installed on all types SPECIFICATIONS: of interior metal, aluminum or • C AN/ULC-S533 Listed • ANSI/UL 294 Listed • C SA-C22.2 No.205 Listed • NFPA 101 • Patent pending wood doors. Meets “no special tools or knowledge” criteria required by code. Electrical: Dual Sense Bar Only - 24 mA at 12 VDC or 24 VDC Dual Sense Bar with Illumination - 44 mA at 12 VDC or 24 VDC Operating Temperature: +32 to +120F [0 to +49C] Indoor use only Shipping Weight: 6 lbs [2.72kg] to 8 lbs [3.63kg] depending on length 3" [76mm] Finishes: BK - Black anodized CL - Clear anodized – 28 – Products. Technology. Services. Delivered Globally. 3" [76mm] 6" 4 6 -13/1 -13/16" 73mm] 0 4 " 6 1 m,11 34 -13/ , 1021m [86 8mm 1-844-522-5275 | clarksecurity.com Exit Bars Exit Solutions: DUAL VOLTAGE TSB TSB Touch Sense® Bar CLK# Part # Description List Touch-Triggered Release for Reliable Egress cs487233 TS-5 Replacement Touch Sensor and Board for TSB Touch Sense Bars $149.00 The TSB Touch Sense Bar cs111224 TSB-BK 36” Touch Sense Bar, Black Anodized $435.00 provides touch-triggered cs109381 TSB-CL 36” Touch Sense Bar, Clear Anodized $415.00 release of magnetically locked, cs104863 TSB-CL-42 42” Touch Sense Bar, Clear Anodized $415.00 non-fire-rated doors. Touching cs139368 TSB-BCA End Cap and Mount base F/ TSB $71.00 the bar, even through light gloves or clothing, triggers an PRODUCT FEATURES: • Can be field cut to accommodate non-standard openings up to 48” • Activates a DPST 2A rated relay when touched (no mechanical movement) which will allow free egress, or initiates the delay on an exit delay timer • Backup push button • 16 ft. [4.8m] 22AWG 6 conductor cable and armored door cord included • Automatic dual-voltage 12 VDC/24 VDC • Available ElectroLynx® ready • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • 36” (914mm) Length • 42” (1,067mm) Length • 4 8” (1,219mm) Length • (EL) ElectroLynx® ready • (D) Dummy bar with no release function • Through-bolt kit works on doors up to 2-1/4” thick • Cover plates for retrofit of competitor products • Trailing edge timer electronic sensor that releases SPECIFICATIONS: • ANSI/UL 294 Listed • C SA-C22.2 No.205 Listed • C SFM – California State Fire Marshal Approved • MEA- City of New York Approved • CE: EN 50091-1, EN 61000-6-2 Approved the lock. For indoor use only, Electrical: criteria in code requirements. types of metal, aluminum or wood frame doors. Meets “no special tools or knowledge” 40 mA at rest; 25 mA releasing at 12 VDC or 24 VDC Operating Temperature: +32 to +110F [0 to +43C] Indoor use Shipping Weight: 7 lbs [3.18kg] to 9 lbs [4.08kg] depending on length Finishes: BK - Black anodized CL - Clear anodized TCP covers unwanted mounting holes from previously installed exit bars 3" [76mm] 2-3/4" [70mm] 1-844-522-5275 | clarksecurity.com the TSB installs easily on all 34-1/2", 40-1/2", 46-1/2" [870mm, 1022mm,1175mm] – 29 – Products. Technology. Services. Delivered Globally. Exit Bars Exit Solutions: EMB EMB Electromechanical Bar cs466152 EMB-BK 36” Electromechanical Release Bar, Black Anodized $264.00 Mechanical Motion for Maglock Release in a Reliable, Durable Exit Bar cs477073 EMB-CL 36” Electromechanical Release Bar, Clear Anodized $252.00 Use the Electromechanical cs479987 WEMB-CL 36” Weatherized Electromechanical Release Bar, Clear Anodized $279.00 Exit Bar (EMB) on magnetically CLK# Part # Description List locked, non-fire-rated doors PRODUCT FEATURES: • Low profile design requires only 1/4” movement for activation • Can be field cut to accommodate non-standard openings up to 48” • Uses same mounting pattern as the TSB and DSB • Direct retrofit for some competitor footprints • Mechanical action activates a DPDT 5A rated output to allow free egress or initiate an exit delay timer • Redundant switches ensure reliable, fault-tolerant operation • All metal construction • 16 ft. [4.8m] 22AWG 6 conductor cable and armored door cord included • MagnaCare® lifetime replacement, no fault warranty or as an initiate device for a SPECIFICATIONS: delayed egress timer. Pressing • ANSI/UL 294 Listed the bar activates internal mechanical switches that Operating Temperature: release the lock. Optional -4 to +185F [-20 to +85C] Optional Weather-resistant waterproof switches are available, which allow the EMB Shipping Weight: 7 lbs [3.18kg] to 9 lbs [4.08kg] depending on length Finishes: to function in protected outdoor applications. Meets “no special tools or knowledge” criteria for BK - Black anodized CL - Clear anodized code requirements. PRODUCT OPTIONS: • 36” (914mm) Length • 42” (1,067mm) Length • 4 8” (1,219mm) Length • ( W) Weather-resistant upgrade • Through-bolt kit works on doors 1-3/4” to 2-1/4” thick • Cover plates for retrofit of competitor products TCP covers unwanted holes from previously installed exit bars, strengthens the mounting area and provides a clean look. 1.6" [41mm] 2.6" [66mm] 34.5, 40.5, 46.5" [876mm, 1029mm, 1181mm] – 30 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Exit Handles Exit Solutions: DUAL VOLTAGE TSH Touch Sense® Handle CLK# Part # Description cs128385 TSH-CL List $406.00 Touch Sense Handle, Push/Pull, Clear Anodized PRODUCT FEATURES: • For use on any push, pull or swing- through door • Activates electronic release via DPST 2A rated relay when touched to allow free egress • Backup push button • 16 ft. [4.8m] 22AWG 6 conductor cable and armored door cord included • Automatic dual-voltage 12 VDC/24 VDC • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • (EL) ElectroLynx® ready SPECIFICATIONS: • ANSI/UL 294 Listed • CSA-C22.2 No.205 Listed • CSFM – California State Fire Marshal Approved • MEA- City of New York Approved • CE: EN 50091-1, EN 61000-6-2 Approved Dimensions: 5”L x 2-1/8”D x 9”H TSH-CL Electrical: 40 mA at rest; 25 mA releasing at 12 VDC or 24 VDC Operating Temperature: +32 to +110F [0 to +43C] Indoor use only Shipping Weight: Compact Push or Pull Egress Alternative for Maglock Release Sized to conceal existing mounting holes, the TSH 3 lbs [1.36kg] Touch Sense Handle replaces Finishes: standard pulls on aluminum BK - Black anodized CL - Clear anodized for egress. With flexible doors to allow maglock release options, it works equally well on in-swing doors or as a 5" [127mm] push-open device for out-swing doors, offering a clean look on aluminum frame glass doors. 9" [229mm] 2-1/8" [54mm] 1-844-522-5275 | clarksecurity.com – 31 – Products. Technology. Services. Delivered Globally. Readers Entrance Solutions: R100 Wireless Reader and Aperio Hub CLK# Part # Description 547910 R100-1H-SE List Surface mounted wireless iCLASS SE reader and pre-paired 1:1 Aperio® hub PRODUCT FEATURES: • Adheres to glass surface without any connecting wires • Online transaction audit trail capability • Low battery signaling and reporting • Green status LED indicator • Shortened wire pull from panel to hub provides cost benefit in installation • Fully-encrypted AES 128 wireless communication • SecuriCare three-year, no fault warranty $700.00 SPECIFICATIONS: • FCC Part 15 • IC Compliant Dimensions: 4.25” x 1.8” x 1.0” [108mm x 46mm x 26mm] Operating Temperature: R100-1H -40 to +122F [-40 to +50C] Indoor or outdoor use PRODUCT OPTIONS: • Low frequency model supports PROX and EM PROX • High frequency model supports iCLASS®, iCLASS Seos™, iCLASS SE, ISO14443B UID, Mifare, Mifare Plus, Desfire SE, Desfire EV1, NFC Surface Mounted–No Drilling Shipping Weight: The R100 surface mounted 2.83oz [80g] wireless reader with Aperio Finishes: technology offers an elegant 1 x 3V CR2 Lithium Battery Electronic Access Control System to glass, stone, granite or marble entryways. Installation Access Control Panel is easy, requires no drilling or Wiegand TCP/IP 1-25/32" [45mm] Aperio Hub Electromagnetic Lock Local wireless communication eliminates the cost and inconvenience of wiring in and around the door, without the hassle of complex site surveys. way to extend access control 1" [25mm] pulling of wires and can adhere in minutes. A complement to ASSA ABLOY electrified locking devices, including electro- IEEE 802.15.4 (2.4GHz) magnetic locks, electrified strikes, electric locks and 4-7/32" [107mm] electrified exit devices, glass entryways can now integrate robust access control while maintaining a clean, Typical configuration with electromagnetic lock – 32 – Products. Technology. Services. Delivered Globally. wireless appearance. 1-844-522-5275 | clarksecurity.com Keypads Entrance Solutions: DK-12 Digital Keypad System CLK# Part # Description cs470981 DK-12 List The DK-12 is a one piece unit designed for lower security requirements, 99 User, Single $181.00 Gang Digital Entry System cs248453 WBB Weather Back Box for Single Gang Devices $34.00 cs118916 WCC Clear Weather Cover for Single Gang Devices $47.00 PRODUCT FEATURES: • Single gang, stainless steel plate with low voltage mounting ring • 12 key illuminated 3x4 keypad • True 10-digit operation (10 digits plus * and # keys) • 99 user code capability • Easy programming from the keypad • Passage mode and Lockout mode • Configurable audible keystroke echo • Red, green and yellow LEDs for status and programming feedback • Fail secure or fail safe-capable • Easy to install with simple hand tools • Accepts 12V or 24 VAC or DC current • 5A SPDT timed, control relay output • Request to exit (REX) input • MagnaCare® lifetime replacement, no fault warranty Dimensions: 2-3/4”W x 4-1/2”H x 5/32”D Electrical: 12/24 VDC: 70 mA Maximum 30 VDC or 300 VAC switched voltage Operating Temperature: SP-1 -10 to +140F [-23 to +60C] Primarily for indoor applications Shipping Weight: 1lb [0.45kg] All-in-One Keypad System for Single-Door Traffic Control The DK-12 standalone keypad Finishes: and controller is ideal for lower US32B/630 - Satin Stainless Steel security requirements such as traffic control. Easy to install and easy to program, the one- PRODUCT OPTIONS: piece DK-12 supports 99 user • Weather-resistant cover (WCC) • Weather-resistant backbox (WBB) codes, including Passage mode and Lockout mode. Need an Outdoor Solution? 4-1/2" [114mm] WCC WBB 2-3/4" [70mm] WCC and WBB allow DK-12 keypad to be mounted in outdoor locations not directly exposed to rain or snow 1-844-522-5275 | clarksecurity.com – 33 – Products. Technology. Services. Delivered Globally. Keypads Entrance Solutions: DK-16 Digital Keypad System CLK# Part # Description List cs192239 DK-16P Digital Keypad only Indoor Use, Single Gang $190.00 cs169012 DK-16/26CBO Circuit Board Only F/DK-26 $211.00 cs248453 WBB Weather Back Box for Single Gang Push Buttons $34.00 cs118916 WCC Clear Weather Cover for Single Gang Push Buttons $47.00 PRODUCT FEATURES: • 12 key 3x4 keypad with engraved and paint filled numbers • Stainless steel plate • Red, green and yellow LEDs for status and programming feedback • Audible keystroke echo • 59 users • User code and/or hard code disable feature • 5A DPDT relay output • Request to exit (REX) input • True 10 digit operation (keys are not paired), 3 LEDs and a beeper • 16 ft. [4.8m], 12 conductor, 22 gauge keypad cable • MagnaCare® lifetime replacement, no fault warranty Dimensions: Keypad: 2-3/4”W x 4-1/2”H x 5/32”D Enclosure: 6”W x 8”H x 3”D Electrical: 12 VAC/VDC: 7 mA at rest; 160 mA active 24 VAC/VDC: 20 mA at rest; 190 mA active CPU: +32 to +158F [0 to +70C] Keypad: +32 to +110F [0 to +43C]Indoor use Secure, Easy-to-Program Single Door Control System Shipping Weight: The DK-16 digital keypad 4.2 lbs [1.91kg] system provides medium/ high security control of electric Finishes: PRODUCT OPTIONS: • Weather-resistant cover (WCC) • Weather-resistant backbox (WBB) • Keypad available as system or separately DK-16 Operating Temperature: US32D/630 – Satin Stainless Steel locks in a one- or two-door application where both doors have the same control needs. The tamper-resistant 3x4 keypad provides true 10key operation for use and programming. Encased in a separate enclosure for secure installation in a protected area, the controller offers REX 4-1/2" [114mm] 8" [203mm] input and relay output for lock control, alarm shunt or other interfaces. 6" [152mm] 3" [76mm] – 34 – Products. Technology. Services. Delivered Globally. 2-3/4" [70mm] 1-844-522-5275 | clarksecurity.com Keypads Entrance Solutions: DK-26 Digital Keypad System CLK# Part # Description cs119219 DK-26BK List D K-26 Series Black Anodized Keypad, digital keypad system designed for medium/high security control of electric locks. The rugged stainless steel keypad is fully weatherproof and can be mounted outdoors and in most $405.00 $200.00 environments. cs127825 DK-26PSS cs119042 DK-26SS Digital Keypad only, Stainless Steal D K-26 Series Stainless Steal Keypad, digital keypad system designed for medium/high security control of electric locks. The rugged stainless steel keypad is fully weatherproof and can be mounted outdoors and in most $395.00 $42.00 environments. cs108312 DK-SSS Spy Shield F/ DK26 Stainless DK-26 PRODUCT FEATURES: • Cast stainless steel with 11 EPDM rubber keys • Weatherproof and vandal resistant • 12V or 24V/ AC or DC current • Mounts on a narrow mullion • Audible keystroke echo • True 10 digit operation(keys are not paired) • 59 users with multiple entry codes • User code and hard code disable feature • Passage Mode and Lockout Mode • 5A DPDT relay • Request to exit (REX) input • 16 ft. [4.8m], 12 conductor, 22 gauge keypad cable • 3 LEDs and a bell button • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • Cover plate • Keypad available as system or separately Dimensions: DK-26 Keypad: 1-1/2”W x 7”H x 7/8”D Enclosure: 6”W x 8”H x 3”D Digital Control System for Narrow Stile Outdoor Applications Electrical: The DK-26 digital keypad 12 VAC/VDC: 7 mA at rest; 160 mA active 24 VAC/VDC: 20 mA at rest; 190 mA active system provides medium/ Operating Temperature: locks in one or two door CPU: +32 to +158F [0 to +70C] Keypad: -22 to +158F [-30 to +70C]Indoor or Outdoor use the same control needs. The applications where doors have fully weatherproof, rugged Shipping Weight: stainless steel keypad can 5 lbs [2.27kg] be mounted in most outdoor Finishes: US32D/630 - Satin Stainless Steel BK - Black 1-1/2" [38mm] SPECIFICATIONS: high security control of electric environments. Encased in a separate enclosure for secure installation, the full-featured, easy to program, DK-26 is ideal for narrow stile applications. • CE: EN 50091-1, EN 61000-6-2 Approved 7" [178mm] 1-844-522-5275 | clarksecurity.com 7/8" [22mm] – 35 – Products. Technology. Services. Delivered Globally. Controller Control Solutions: DKC Digital Controller CLK# DKC Part # Description cs104422 DKC List T he DKC digital keypad controller and software provides stand-alone control of up to two electrically locked doors. Adding door users is fast and simple, either program directly from the keypad or upload via easy-to-use Programming Tool. $355.00 PRODUCT FEATURES: • New, easy-to-use, intuitive remote programming option › Allows users and user codes to be entered from the comfort of the administrator’s desk for later upload to the controllers › Maintains option for the industry’s easiest keypad programming at the reader or the controller board • Ability to independently control up to two doors • E xpanded users - up to 250 per reader • Downloadable audit trail for time/date stamped user access › Stores up to 2000 total events • The controller supports any keypad or card reader capable of 26-bit Wiegand output • Compatible with the ASSA ABLOY Aperio® family of wireless products • Non-volatile memory for fast recover in power outages with no data loss • User code and/or hard code disable feature • 5 Amp DPDT relay output for lock control and alarm shunt, camera call-up or other device interface, REX input • Configurable keypad sound feedback with keystrokes SPECIFICATIONS: • FCC Part 15 and Industry Canada Compliant • Patents pending Dimensions: 6”W x 8”H x 3”D [52mm x 203mm x 76mm] Electrical: 12/24VAC or DC; Minimum 1A supply for the base unit, add supply current for any devices connected to the DC outputs. Operating Temperature: +32 to +110F [0 to +43C] Shipping Weight: 1.75 lbs [0.8kg] Stand-Alone 2-Door Controller for a Flexible, Secure System The DKC Digital Controller provides stand-alone control of up to two electrically locked doors. Adding door users is fast and simple, either upload via easy-to-use software or program directly from an installed system keypad. The DKC offers broad flexibility and ease of use for access control professionals looking for a cost-effective solution for small, simple configurations. Easy-to-use software with upload feature allows quick deployment of a two-door, stand-alone system with the flexibility to use any output reader or keypad capable of 26-bit Wiegand output. The DKC is also compatible with ASSA ABLOY Aperio® wireless products. It communicates with an Aperio Wiegand hub in place of an electronic access control system. Connect your DKC to high quality Securitron keypads, wireless ASSA ABLOY Aperio products, or HID® proximity or smart card readers for sophisticated yet simple access control. – 36 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Timers Electronic Access Control Accessories: TM-2 CLK# TM-2 Part # Description cs117609 TM-2 List PRODUCT FEATURES: • Industrial quality multi-function timer for delay or time sequencing • DIP switches select delay times of 1 to 255 seconds or minutes • Flashing LED provides visual indication of remaining time or alert status • Triggering can be from an N/O or N/C switch • MagnaCare® lifetime replacement, no fault warranty Electrical: 12 or 24 VAC or VDC with 5A DPDT relay output Operating Temperature: +32 to +149F [0 to +65C] TM-9 CLK# The TM-2 is a premium, industrial duty, multi-function timer that provides precise timing using stackable increments in seconds or minutes and easy-to-use dip switch settings. Ideally suited for unusual time sequencing requests, like bank or ATM vaults. TM-9 Part # Description cs218318 TM-9 $135.00 T ime Master II Multi-Function Timer Time Master II MultiFunction Timer List $70.00 T ime Mate Timer PRODUCT FEATURES: • Miniature timer extends momentary switches • Fits in outlet boxes with push buttons or keyswitches • 3A SPDT relay energizes for 2 to 36 seconds • Time setting is selected by easy to configure DIP switches • Applications include releasing electric locks and shunting alarm contacts • MagnaCare® lifetime replacement, no fault warranty Electrical: 12 or 24 VDC or 24 VAC Time Mate Timer The compact TM-9 extends the hold-open request of a pushbutton or Keyswitch, enabling single-hand operation of the door or delaying rearming of alarms. Operating Temperature: +32 to +158F [0 to +70C] DT-7 DT-7 CLK# Part # Description cs971424 DT-7 List $219.00 Prime Time Digital Timer PRODUCT FEATURES: • 7-day digital timer • 10A DPDT relay can be operated in toggle or pulse mode • 12 programmed on/off times • Set daily (6 on, 6 off ), on selected days, or on blocks of days • “First Man In” feature delays preset action until first access • Supports holiday programming • 12 or 24 VAC or VDC • A A battery provides backup to the display module program memory - battery not included • MagnaCare® lifetime replacement, no fault warranty 1-844-522-5275 | clarksecurity.com Electrical: 170 mA at 12V or 24V ( VAC or VDC) Operating Temperature: +32 to +113F [0 to +45C] Shipping Weight: .75 lbs [0.34kg] Prime Time Digital Timer Control doors equipped with electrified hardware - with or without access control - with The DT-7 digital timer. The DT-7 can be used as a stand-alone unit, or in conjunction with DK and other products. Versatile programming supports timed unlocked/locked/or access- control-only states to turn electric locks or other security systems on and off at programmed times. – 37 – Products. Technology. Services. Delivered Globally. Magnetic Switches Electronic Access Control Accessories: MSS Maximum Security Switches CLK# MSS-1 MSS-1C Part # Description List cs125301 MSS-1 High Security Magnetic Switch cs336753 MSS-1C High Security, Concealed, Magnetic Switch cs160327 MSS-1G High Security, Surface Mount, Magnetic Switch $209.00 $209.00 $209.00 MSS-1G Maximum Security Switches for Door Position Detection Tamper-resistant Maximum Security Switches (MSS) provide versatile door monitoring with armored cable PRODUCT FEATURES: • Interfaces to access control and alarm systems for remote indication of open/closed status • Unique “mated” magnetic contact for preventing defeat attempts by foreign magnets • Can be used to provide initiate signal to XDT delayed egress timer • Hidden anti-tamper output(MSS-1 and MSS-1G) • L ayered protection for tamper detection and reporting • SPDT Contact • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • MSS-1 includes jacketed cable for hollow metal applications • MSS-1G includes a 3-foot [936mm] stainless steel cable • (RT) Enables remote testing to confirm function • (C) Concealed SPECIFICATIONS: options to detect the status Dimensions: of windows, doors, gates Contact 3/4”H x 4-1/4”L x 3/4”D and more in higher security settings. With multiple options Switch 1-1/2”H x 4-1/4”L x 3/4”D for different environments, MSS can be used with access Electrical: Main Output: SPDT at max of 125 mA at 24 VDC; 250 mA at 12 VDC Tamper Output: Closed when secure; open to alarm - 1A max current control or alarm systems to provide peace of mind where status detection is a critical concern. Operating Temperature: -40 to +150F [-40 to +65C] Shipping Weight: 1.5 lbs [0.68 kg] • UL 634 Listed • ULC/ORD-C634 Listed • Patent number: 5,668,533 4-1/4" [108mm] 1-1/2" [38mm] 3/4" [19mm] 4-1/4" [108mm] 3/4" [19mm] 3/4" [19mm] – 38 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Door Position Electronic Access Control Accessories: DPS Door Position Switches CLK# Part # Description List cs444972 DPS-M-BK Door Position Switch F/Metal Doors, Black cs431316 DPS-M-WH Door Position Switch F/Metal Doors, White cs447172 DPS-W-BK Door Position Switch F/ Wood Doors, Black cs104423 DPS-W-GY Door Position Switch F/ Wood Doors, Grey cs425852 DPS-W-WH Door Position Switch F/ Wood Doors, White $27.00 $27.00 $21.00 $21.00 $21.00 DPS-W DPS-M Concealed Door Position Switch for Wood Doors: Concealed Door Position Switch for Metal Doors: • Mated magnetic switch and cylindrical magnetic contact • Recesses into door and frame • 3/4” [19mm] round installation, 15/16” deep • Provides Normally Closed SPST switch • Works with door gap up to 3/4” [18mm] • MagnaCare® lifetime replacement, no fault warranty • Mated magnetic switch and magnetic contact • Recessed into door and frame • 3/4” [19mm] round installation, 1/2” deep • L arger cylindrical magnet counters shielding effect of steel • Provides Normally Closed SPST switch • Works with door gap up to 3/4” [18mm] • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • Available in white, gray or black PRODUCT OPTIONS: • Available in white, gray or black Electrical: Switching Current AC/DC (max): 0.4A Operating Temperature: -40 to +150F [-40 to +65C] Electrical: Switching Current AC/DC (max): 0.4A Operating Temperature: DSP-M DSP-W Door Position Switches DPS-W and DPS-M door position switches enable access control systems to monitor the open or closed state of a door. These switches can transmit an initiate signal to Securitron’s XDT delayed exit logic timers and DPA door prop logic timers. -40 to +150F [-40 to +65C] 1-844-522-5275 | clarksecurity.com – 39 – Products. Technology. Services. Delivered Globally. Sounder & Latch Monitors Electronic Access Control Accessories: PZ1 Piezo Sounder CLK# Part # Description cs215515 PZ1 List $66.00 Piezo on Keyplate - Single Gang PRODUCT FEATURES: • Remote annunciator • Powerful Piezo sounder - 86 db • Includes anti-tamper screws • Stainless steel single gang plate 4-1/2” x 2-3/4” [114mm x 70mm] • MagnaCare® lifetime replacement, no fault warranty PZ1 Piezo Sounder The PZ-1 can be used as a local or remote alarm sounder for exit delay or door prop alarm. LM Latch Monitors CLK# LML-1 LMS-1 Part # Description List cs128381 LML-1 Latch Monitor for ANSI, 4-7/8” Strike, SPDT, 3Amp cs128383 LMS-1 Latch Monitor for ANSI, 2-3/4” Strike, SPDT, 3Amp PRODUCT FEATURES: • Electronically detects and reports mechanical latch and bolt positions • Provides peace of mind that the door is secure • Installs easily, conceals behind existing hardware • Requires no jamb or strike plate modification • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • LML-1 provides SPDT switch, fits ANS1 4-7/8” cutout • LMS-1 provides SPDT switch, fits ANSI 2-3/4” cutout • LML-2 monitors mortise latch and deadbolt separately with two SPDT switches $111.00 $111.00 Electrical: Contact Rating: SPDT 2A at 24V Operating Temperature: -40 to +160F [-40 to +71C] 7/8" [22mm] SPECIFICATIONS: • UL 634 Listed • ULC/ORD-C634 Listed • ANSI/UL 294 Listed • C SFM - California State Fire Marshal Approved • Patent numbers: 5,757,269; 5,825,288 – 40 – Products. Technology. Services. Delivered Globally. Latch Monitors The LM Series interfaces with an access control or alarm system to indicate the state of the latchbolt. Used alone or in conjunction with a door position switch, the LM provides confirmation that the door is secure, preventing false alarms and unauthorized access while providing tamper detection. Can also be used to transmit an initiate signal to model XDT delayed egress logic timers. 4-5/8", 2-9/16" [117mm, 65mm] 3-7/16", 1-5/16" [87mm, 33mm] 7/8" [23mm] 1-844-522-5275 | clarksecurity.com Door Prop Alarm & Keyswitch Electronic Access Control Accessories: DPA Door Prop Alarm CLK# Part # Description cs260951 BA-DPA-12 List $240.00 Door Prop Alarm Timer PRODUCT FEATURES: • Multi-functional control timer provides relay action for alarms and alerts • Monitors whether a door remains open after a defined time frame • Includes three 5A SPDT outputs providing local and remote signaling • Digital time settings from 30 to 240 seconds • Detects attempts to tamper with lock or door status • Multiple time ranges for escalating alerts • Bypass mode for valid access/egress needs • Comes with Piezo sounder and LED • MagnaCare® lifetime replacement, no fault warranty Electrical: DPA Max draw 100 mA at 12 VDC Max draw 50 mA at 24 VDC Operating Temperature: Door Prop Alarm The DPA complements door position/door state detection with timed logic and relays that provide escalating alerts when a door is held, propped or unsecure after a defined time period. This unit promotes safety and loss prevention at ancillary exits for healthcare, commercial and retail facilities, and dorms. +32 to +120F [0 to +49C] Shipping Weight: 2.05 lbs [0.93kg] KP1 Tubular Keyswitch CLK# Part # Description cs236015 KP1 Tubular Keyswitch, Momentary, Single Gang List $161.00 PRODUCT FEATURES: • For less demanding applications • Stainless steel face plates • 12/24 VDC bi-color LED, tubular style keyswitches • 7A rated SPDT switch • Momentarily turning the key changes the state of the contacts • Includes anti-tamper screws • Includes two keys • MagnaCare® lifetime replacement, no fault warranty MK Simple Solution for Exit, Door Release, Manual Override or Reset PRODUCT OPTIONS: • Momentary or Alternate switch 1-844-522-5275 | clarksecurity.com – 41 – Products. Technology. Services. Delivered Globally. Mortise Keyswitch Electronic Access Control Accessories: MK Mortise Keyswitch CLK# MK Part # Description cs971341 MK cs173280 MK2 cs971333 MKA cs108378 MKA2 cs971648 MKAN cs203795 MKAN2 cs203796 MKAPZ cs971143 MKN cs134759 MKN2 cs220581 MKPZ cs971124 MKS cs115897 MKS2 cs971689 MKSA Mortise Cylinder Keyswitch, DPDT Momentary, Single Gang Mortise Cylinder Keyswitch, Alternating, Single Gang Mortise Cylinder Keyswitch, DPDT, Alternating, Single Gang Mortise Cyliner Keyswitch, Alternating, Narrow Stile Mortise Cylinder Keyswitch, DPDT Alternating, Narrow Stile Mortise Cylinder Keyswitch w/ Audible, Alternating, Double Gang Mortise Cylinder Keyswitch, Momentary, Narrow Stile Mortise Cylinder Keyswitch, DPDT Momentary, Narrow Stile Mortise Cylinder Keyswitch w/ Audible, Momentary, Double Gang Mortise Cylinder Momentary Keyswitch Only Mortise Cylinder DPDT Momentary Keyswitch Only Mortise Cylinder Alternating Keyswitch Only • Standard with momentary SPDT switch • 12 or 24 VDC • Bi-color LED • Backing bracket permits integration with any 1-1/4”[32mm] or 1-1/8” [28mm] mortise cylinder (not included) • Support for 1-1/2” cylinder using spacer ring and backset • Additional switch position on backing bracket allows another switch to be activated by turning the key in the opposite direction • 5A rated plunger switch • Includes anti-tamper screws • MagnaCare® lifetime replacement, no fault warranty Turns Standard Mortise Cylinder into Full Featured Keyswitch List Mortise Cylinder Keyswitch, Momentary, Single Gang PRODUCT FEATURES: MKN $128.00 $150.00 $128.00 $150.00 $128.00 $150.00 $193.00 $128.00 $150.00 $193.00 $32.00 $54.00 $32.00 The MK Keyswitch supports electric lock control, alarm panel arming, reset and override when paired with any mortise cylinder 1-1/8” to 1-1/2”. Single Pole - Single Throw (SPST): Switches that have one input and one output (NO or NC) and turn on or off in response to the switch action Single Pole - Double Throw (SPDT): Switches with one input and two outputs. When the switch operation occurs, the connection shifts from output A to output B Double Pole - Single Throw (DPST): Two SPST switches that operate in tandem using one switch operation so that two outputs turn on or off simultaneously in reaction to the switch operation PRODUCT OPTIONS: • Momentary or Alternate • SPDT or DPDT • Narrow Stile, Single- or Double-Gang • Local annunciation via Piezo sounder • Additional switch add on • 1-1/8” Key Cylinder, 26D Finish, SC keyway Double Pole - Double Throw (DPDT): Two SPDT switches that operate in tandem using one switch operation so that each connection shifts simultaneously from its primary output to its secondary output Finishes: Alternate Switch: An Alternate Switch changes state upon activation and does not change back until reactivated. A light switch is a common example of an alternate switch. Alternate switches are also called maintained or latching switches Normally Open Contacts (NO): A normally open contact provides an open circuit where no current is flowing in its usual state. Wired in Parallel for Fail Secure type electric locks. i.e. Electric strike. Activating any switch will apply power releasing the lock. Normally Closed Contacts (NC) A normally closed contact provides US26D - Satin Chrome a closed circuit where current is flowing in its usual state. Momentary Switch: A momentary switch changes state during activation and reverts to its original state upon deactivation. A doorbell is a common example of a momentary switch. A timer can be used to extend the effect of the switch operation for a specific amount of time. – 42 – Products. Technology. Services. Delivered Globally. Wired in Series for fail safe type electric locks. i.e. Securitron Magnalocks. Activating any switch will break power releasing the lock. 1-844-522-5275 | clarksecurity.com Relay Boards Electronic Access Control Accessories: RB Relay Board CLK# Part # Description cs971062 RB-4-12 Relay Board - 12VDC cs971008 RB-4-24 Relay Board - 24VDC PRODUCT FEATURES: • 4 DPDT relays with 2A contacts • Individual coil connections - common negative or positive • Replaces socket mount relays • Dry contact connections via screw terminals • Relays have low current coils(13 mA at 12 VDC; 8 mA at 24 VDC) • Allows operation from most LED drive outputs • MagnaCare Lifetime Replacement No Fault Warranty List $109.00 $109.00 Dimensions: RB 4”W x 3-1/2”H Relay Board Electrical Max Draw: The relay board provides Normally - Open or Normally - Closed relays that can be interconnected. Ideal for interlock installations or wherever a basic relay board is used to trigger action, shunt alarms or report status from an access control system. 32 mA at 12 VDC or 32 mA at 24 VDC Operating Temperature: -13 to +158F [-25 to +70C] RLP Relay Logic Pack CLK# Part # Description cs124275 RLP-12 Relay Logic Pack- 12VDC cs971128 RLP-24 Relay Logic Pack- 24VDC PRODUCT FEATURES: • Provides additional relay to access control systems requiring N/O or N/C dry status signals • Provides a brief delay to harmonize door state reporting from multiple detection points • Can create a relay interlock circuit • Use with locks to create an interlocked trap entry • Provides DPDT relay with 1A contacts • Provides time delay of door operator when electric lock is used • MagnaCare® lifetime replacement, no fault warranty 1-844-522-5275 | clarksecurity.com List $55.00 $55.00 Relay Logic Pack Electrical Max Draw: 30 mA at 12 VDC or 15 mA at 24 VDC Max Operating Temperature: -13 to +158F [-25 to +70C] RLP The economical, multifunction RLP logic circuit can be used as a DPDT latching alarm relay, or provide a relay for two-door interlocks (mantrap), or can initiate a brief signal delay to eliminate timing problems among multiple monitoring points on a door under access control. – 43 – Products. Technology. Services. Delivered Globally. Power Supply Power Solutions: ECOPOWER 0.5A Power Supply for Low-Power Lock CLK# EPS-05 Part # Description CS104426 EPS-05 List Ecopower 0.5A Power Supply for Low-Power Locks $258.00 0.5A Power Supply for LowPower Locks Securitron EcoPower power supply is designed to work PRODUCT FEATURES: • E xtremely low power consumption, only 8.5mW standby power consumption with a 115V input • Included battery provides 24 hours of backup • Universal input voltage capabilities (100-240 VAC) • Multiple mounting options › Surface mounted ›Recessed into drywall › U se either the factory box or an existing UL Listed double gang junction box • Reduced low current wire runs and wire run length provides additional cost savings • Fire alarm input dry contact (NO or NC) • Access control input dry contact (NO or NC) • Battery included* • Supports fail secure and fail safelock configurations • LED troubleshooting • Built in battery end-of-life notification system • MagnaCare® lifetime replacement, no fault warranty with ultra-low-power electrified Electrical: Input voltage: 100-240V Output voltage: 12V Standby power: <10mW at 115V, <20mW at 230V Output current: 0.5A peak, 0.1A continuous Includes one (1) 800 mAh sealed AGM lead acid battery* access control devices. This small aesthetic power supply reduces standby power consumption to only 8.5mW, a 99% energy savings compared Operating Temperature: to switching power supplies. -4 to +122F [-20 to +50C] When paired with EcoFlex™ Dimensions: from SARGENT and Corbin 4”L x 4”W x 3-3/4”D enclosure Russwin, EcoPower reduces Shipping Weight: total door power consumption 1.7 lbs [0.77kg] 99%, from up to 20W to 0.3W or less. EcoPower is the most efficient, fully featured power supply available today. SPECIFICATIONS: • UL 294 (6th Edition) listed • UL 603 Listed • ULC S533 Listed • CE Certified • EN 55022: 2010 Class A (Emissions) • EN 55024: 2010 (Immunity) • RoHS Compliant • REACH Compliant • GreenCircle Certified 4" [101.6mm] 3-3/4" [95.25mm] * Battery not covered under MagnaCare® Warranty † Certification Numbers: 14-0253; 14-0254 – 44 – Products. Technology. Services. Delivered Globally. 4" [101.6mm] 1-844-522-5275 | clarksecurity.com Power Supply Power Solutions: DUAL VOLTAGE SUPERVISION BPS 12/24-1 Dual Voltage Linear Power Supply 12/24 VDC, 1AMP CLK# Part # Description CS478551 BPS-12/24-1 List $269.00 Dual Voltage Linear Power Supply BPS 12/24 VDC, 1AMP PRODUCT FEATURES: • Dual output, field selectable 12 or 24 VDC via clearly marked toggle switch • Supplies 1 full AMP continuous current output, even while charging back-up batteries • Linear regulated power supply provides the cleanest power available • UL Class 2 power limited output • SPDT AC monitoring output allows for remote monitoring of the power supply’s 110 VAC input • E xternal LED indicator (AC and DC) easily determines power status • UL Listed, low-current fire alarm disconnect requires only a minimum size fire alarm relay and wire gauge • Polyswitch 2A breaker allows for large short duration inrush current if batteries are installed (approx. 20A for 1 second) • Line voltage and DC fuses • Sealed lead acid or gel battery charging capability (battery sold separately, see page 114) • MagnaCare® lifetime replacement, no fault warranty BPS-12/24-1 Linear Power for Sensitive Electronics SPECIFICATIONS: • UL Listed The BPS series of power Electrical: supplies delivers linear 12V/24V selector switch Input Voltage: 120 VAC Output Current: 1A at 12 VDC or 24 VDC technology recommended by most manufacturers of sensitive electronic access control and security components. Safe Operating Temperature: for use with readers, electric +32 to +105F [0 to +40C] strikes, and maglocks, these Dimensions: units interface to fire alarm 9”L x 12”H x 4”D systems and provide battery Shipping Weight: backup. The BPS-12/24-1 is UL 9 lbs [4.08kg] Class 2 listed. 12" [305mm] 4" [102mm] 1-844-522-5275 | clarksecurity.com 9" [229mm] – 45 – Products. Technology. Services. Delivered Globally. Power Supply Power Solutions: SUPERVISION BPS 12 VDC or 24 VDC Linear Output for High Performance CLK# Part # Description List CS971127 BPS-12-1 Boxed Liner Power Supply 12VDC, 1 AMP $217.00 CS101569 BPS-12-3 Boxed Liner Power Supply 12VDC, 3 AMP $423.00 CS135189 BPS-12-6 Boxed Liner Power Supply 12VDC, 6 AMP $757.00 Linear Power Supply CS150610 BPS-12-9 Boxed Liner Power Supply 12VDC, 9 AMP $916.00 The BPS series single voltage CS971119 BPS-24-1 Boxed Liner Power Supply 24VDC, 1 AMP $217.00 power supplies deliver linear CS108379 BPS-24-10 Boxed Liner Power Supply 24VDC, 10 AMP $1,126.00 technology recommended by CS971572 BPS-24-2 Boxed Liner Power Supply 24VDC, 2 AMP $423.00 most manufacturers of sensitive CS971671 BPS-24-3 Boxed Liner Power Supply 24VDC, 3 AMP $639.00 electronic access control and CS111570 BPS-24-4 Boxed Liner Power Supply 24VDC, 4 AMP $757.00 security components. Safe CS104866 BPS-24-6 Boxed Liner Power Supply 24VDC, 6 AMP $916.00 for use with readers, electric strikes, and maglocks, these PRODUCT FEATURES: • 1, 4 or 8 outputs protected with polyswitch (PTC) 2A circuit breakers • LEDs provide an easy-to-read voltage indicator for output zone status (voltage, no voltage) • Slide switches connect or disconnect load from power (excludes 1A) • Battery charging and backup capability (battery sold separately, see page 114) • Rugged steel enclosure • Fire alarm relay connection for release of all devices upon fire alarm activation • Clean linear power for flawless operation with all sensitive active electronic components • MagnaCare® lifetime replacement, no fault warranty Electrical: Input Voltage: 120 VAC Operating Temperature: +32 to +105F [0 to +40C] Shipping Weight: BPS-12-1, BPS-24-1: 9 lbs [4.08kg] BPS-12-3, BPS-24-2: 15 lbs [6.80kg] BPS-12-45, BPS-24-3: 18 lbs [8.16kg] BPS-12-6, BPS-24-4: 24 lbs [10.89kg] BPS-12-9, BPS-24-6: 28 lbs [12.70kg] BPS-12-15, BPS-24-10: 33 lbs [14.97kg] units interface to fire alarm systems and provide battery backup. The BPS power supplies provide 12 VDC or 24 VDC output with a variety of amp sizes that support small or large power needs. SPECIFICATIONS: • UL 294 Listed • C SA-C22.2 No.205 Listed • MEA – City of New York Approved – 46 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Power Supply Power Solutions: SUPERVISION BPSM Self Monitoring Power Supply CLK# Part # Description 421268 BPSM-24-10 List - Power Supply - 24VDC, 10A, Status Monitor PRODUCT FEATURES: • Polyswitch (PTC) 2A output breakers protect 8 outputs • Easy-to-use slide switches connect or disconnect load from power • LED indicators (AC and DC) provide easy-to-read visual status of power supply • Emergency low-current, fire-release terminals • AC status output terminals provide real time status information, SPDT, 3A • Battery status output terminals supply real time information, Form “C” SPDT, 3A • Line voltage and DC fuses • Sealed lead acid or gel battery charging capability (battery sold separately, see page 114) • Automatic battery disconnect to prevents deep discharge • Clean linear power delivers flawless operation with all sensitive active electronic components • MagnaCare® lifetime replacement, no fault warranty Electrical: Clean Linear Output with BuiltIn Supervision Input Voltage: 120 VAC Voltage and Capacity: › 12 VDC - 6A, 9A, 15A › 24 VDC - 4A, 6A, 10A Monitoring: 110 VAC Status, Battery Status The BPSM self-monitoring power supply delivers all the benefits of linear technology with battery supervision for realtime power status information. Operating Temperature: This unit is the right choice +32 to +105F [0 to +40C] when interfacing to fire alarm Dimensions: 15”W x 8”H x 6”D systems with auxiliary relays Shipping Weight: that can’t handle the full BPSM-12-6, BPS-24-4: 24 lbs [10.89kg] BPSM-12-9, BPS-24-6: 28 lbs [12.70kg] BPSM-12-15, BPS-24-10: 33 lbs [14.97kg] supply, or when monitoring current potential of the power power systems for AC failure or DC battery failure. BPSM PRODUCT OPTIONS: Output Current: • 6A /12 VDC • 9A/12 VDC • 15A/12 VDC • 4 A/24 VDC • 6A/24 VDC • 10A/24 VDC SPECIFICATIONS: • ANSI/UL 294 Listed • C SA-C22.2 No.205 Listed 1-844-522-5275 | clarksecurity.com BPSM status LED indicators and 6" [152mm] status output terminals offer advanced protection. 15" [381mm] 18" [457mm] – 47 – Products. Technology. Services. Delivered Globally. Power Supply AC Loss and Low Battery Status BPS-12/24-1 120 VAC 12/24 VDC 1A √ √ 1 AC LOSS ONLY W/FAR BPS-12-1 120 VAC 12 VDC 1A √ √ 1 - W/FAR-12 BPS-12-3 120 VAC 12 VDC 3A √ √ 4 W/PSM-12 W/FAR-12 BPS-12-45 120 VAC 12 VDC 4.5A √ √ 4 W/PSM-12 W/FAR-12 BPS-12-6 120 VAC 12 VDC 6A √ √ 8 W/PSM-12 W/FAR-12 BPS-12-9 120 VAC 12 VDC 9A √ √ 8 W/PSM-12 W/FAR-12 BPS-12-15 120 VAC 12 VDC 15A √ √ 8 W/PSM-12 W/FAR-12 BPS-24-1 120 VAC 24 VDC 1A √ √ 1 - W/FAR-24 BPS-24-2 120 VAC 24 VDC 2A √ √ 4 W/PSM-24 W/FAR-24 BPS-24-3 120 VAC 24 VDC 3A √ √ 4 W/PSM-24 W/FAR-24 BPS-24-4 120 VAC 24 VDC 4A √ √ 8 W/PSM-24 W/FAR-24 BPS-24-6 120 VAC 24 VDC 6A √ √ 8 W/PSM-24 W/FAR-24 BPS-24-10 120 VAC 24 VDC 10A √ √ 8 W/PSM-24 W/FAR-24 BPSM-12-6 120 VAC 12 VDC 6A √ √ 8 √ W/FAR-12 BPSM-12-9 120 VAC 12 VDC 9A √ √ 8 √ W/FAR-12 BPSM-12-15 120 VAC 12 VDC 15A √ √ 8 √ W/FAR-12 BPSM-24-4 120 VAC 24 VDC 4A √ √ 8 √ W/FAR-24 BPSM-24-6 120 VAC 24 VDC 6A √ √ 8 √ W/FAR-24 BPSM-24-10 120 VAC 24 VDC 10A √ √ 8 √ W/FAR-24 Manual Reset Option Output Current # of Outputs Output Voltage UL Listed Input Voltage Battery Charger Power Solutions: BPS Linear Power Supply Selection Guide Connection to AC power is hard wired. AC Loss & Low Battery Status PSP-12 120 VAC 12 VDC 700 mA - - 1 - - PSP-24 120 VAC 24 VDC 350 mA - - 1 - - PSP-12-3 120-220 VAC 12 VDC 3A - - 1 - - PSP-24-15 120-220 VAC 24 VDC 1.5A - - 1 - - – 48 – Products. Technology. Services. Delivered Globally. Manual Reset Option Output Current # of Outputs Output Voltage UL Listed Input Voltage Battery Charger Plug In Power Supply Selection Guide 1-844-522-5275 | clarksecurity.com Power Supply Power Solutions: DUAL VOLTAGE AMPERAGE SUPERVISION AQD3 SERIES 3A/1.5A 12 VDC/24 VDC Dual-Voltage CLK# AQD3 Part # Description CS479014 AQD3 AQD3 W/ 1 output $209.00 CS479059 AQD3-1R AQD3 W/ 1 output and 1 Relay $294.00 CS479060 AQD3-4C AQD3 w/ 4 outputs and 1 Relay, PTC Fused $272.00 CS479015 AQD3-8F8R AQD3 w/ 8 outputs and 8 Relays, Glass Fused $423.00 PRODUCT FEATURES: • Rated up to 2.8A/1.4A continuous output • Dual-voltage 12/24 VDC field selectable • Tolerates brownout or overvoltage input from 90-240 VAC • Thermal shutdown protection comes with auto restart • Circuit breaker protects against Over-current and reverse battery faults • Includes battery charger and power supervision • Low battery disconnect prevents deep discharge • Dedicated voltage enables faster battery charging even under full load • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: Switching Power Supply List The Securitron AccuPower® AQD3 Series of switching power supplies are dual voltage, supervised units with a battery charger. These field selectable units have a Dimensions: fast battery charge reserve. 14”x 9” x 3-1/2” enclosure They provide a maximum Electrical: 3As at 12 VDC or 1.5As at • Power supply outputs are Class 2 power limited 24 VDC, with up to eight (8) • E xpandable up to eight (8) independently controlled power limited outputs independently controlled, power limited outputs. • Available with configurable access control input/outputs with fire trigger in either PTC or with fuse/ dry contact option, fire relay only, or configurable outputs with fire relay input • LED indicators and form “C” contacts provide supervision • Universal input 90-240 VAC Please refer to the table • ANSI/UL 603 Listed • ULC-S318 Listed • ANSI/UL 294 Listed • Supports up to two (2) sealed gel, AGM or wet lead acid batteries Operating Temperature: PDB-8C Fuse Type # of Relays Relay Type AQD3 3/ 1.5 1 Y - - - - L L L AQD3-1R 3/ 1.5 1 Y - - 1 Fire L L L AQD3-4C 3/ 1.5 4 Y 0.35A PTC - - L L L Access 3/ 8 Y 0.5A Fuse 8 Control AQD3-8F8R 1.5 L w/Fire L: Listed 1-844-522-5275 | clarksecurity.com UL 294 UL 603 ULC S318-96 Fuse Rating Output Amps 7.65 lbs [3.47kg] Product Number Shipping Weight: # of Outputs Class 2 Power Limited -4 to +104F [-20 to +40C] - - R: Recognized – 49 – Products. Technology. Services. Delivered Globally. Power Supply Power Solutions: DUAL VOLTAGE AMPERAGE SUPERVISION AQD5 SERIES 5A/3A 12 VDC/24 VDC Dual-Voltage CLK# AQD5 Part # Description Switching Power Supply List CS479017 AQD5 AQD5 w/ 1 outputs $294.00 CS479018 AQD5-4F AQD5 w/ 4 outputs, Glass Fused $333.00 CS479019 AQD5-8F8R AQD5 w/ 8 outputs, 8 Relays, Glass Fused $466.00 PRODUCT FEATURES: • Dual-voltage 5A/12 VDC or 3A/24 VDC field selectable continuous output • Tolerates brownout or overvoltage input from 90-240 VAC • Thermal shutdown protection with auto restart provided • Circuit breaker protects against over-current and reversebattery faults • Battery charger and power supervision • Low battery disconnect prevents deep discharge • Dedicated voltage enables faster battery charging even under full load • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: The Securitron AccuPower® AQD5 Series of switching power supplies are dual-voltage supervised units with a battery charger. These units are field Dimensions: selectable for 5A at 12 VDC or 14” x 9” x 3-1/2” enclosure 3A at 24 VDC, with up to eight Electrical: (8) independently controlled, • Power supply outputs are Class 2 power limited power limited outputs. • E xpandable up to eight (8) independently controlled power limited outputs • Available with configurable access control input/outputs with fire trigger and fuse/dry contact option, fire relay only, or configurable outputs with fire relay input • Universal input 90-240 VAC • LED indicators and form “C” contacts for supervision Please refer to the table • ANSI/UL 603 Listed • ULC-S318 Listed • ANSI/UL 294 Listed • Enclosure supports up to two (2) 7Amp-hour sealed gel, AGM or wet lead acid batteries Operating Temperature: Fuse Rating Fuse Type # of Relays Relay Type UL 294 UL 603 ULC S318-96 CAN/ULC S533-M87 5/3 1 Y - - - - L L L L AQD5-4F 5/3 4 Y 2A Fuse - - L L L L Access Y 0.5A Fuse 8 Control R w/Fire R R - # of Outputs AQD5 Output Amps 7.65 lbs [3.47kg] Product Number Shipping Weight: Class 2 Power Limited -4 to +104F [-20 to + 40C] AQD5-8F8R 5/3 8 AQD5-8F8R L: Listed – 50 – Products. Technology. Services. Delivered Globally. R: Recognized 1-844-522-5275 | clarksecurity.com Power Supply Power Solutions: DUAL VOLTAGE AMPERAGE SUPERVISION AQD6 Series 6A / 12 or 24 VDC Dual-Voltage AQD6 Part # Description dual voltage supervised units 14” x 14” x 4-3/4” enclosure with a battery charger designed Electrical: to power magnetic locks, electric strikes, card readers, • 6A at 12 VDC or 24 VDC output sensors, access control boards • 115 or 230 VAC/50 or 60Hz input and other devices in access • Supports up to two (2) sealed gel, AGM or wet lead acid batteries control systems. The AQD6 Series can also be used to • High efficiency: 90% at 24V output, full load power DC cameras and other • Output voltage ripple at full load 240mV p-p DC locking equipment. Operating Temperature: These units provide field -4 to +122F [-20 to +50C] selectable 6A at 12 or 24 VDC Shipping Weight: with up to 16 independently 12.7 lbs [5.76kg] controlled power limited outputs. The AQD6 is Securitron’s first power supply series that meets UL 294 8 Y 2A Access Fuse 8 control L w/ Fire L: Listed UL1481 6 ULCS318-96 AQD6-8F8R UL294 PDB-8C UL603 6th Edition. Relay Type • UL 294 (6th Edition) listed • UL 603 Listed • ULC S318 Listed • UL 1481 Listed • RoHS compliant • Environmental Product Declaration • Health Product Declaration Amps Outputs Class 2 Power Limited SPECIFICATIONS: # of Relays • Dual-voltage 6A 12 or 24 VDC field selectable continuous output • Tolerates brownout or overvoltage input ± 15% of nominal voltage • Thermal shutdown protection with auto restart • Circuit breaker protects against overcurrent and reverse battery faults • Dedicated battery charging circuit prevents overvoltage on locking devices • E xpandable up to 16 outputs; Class 2 power limited outputs available • Available with a single relay fire trigger or individually fire trigger relayed outputs • MagnaCare® lifetime replacement, no fault warranty switching power supplies are Dimensions: Fuse Type PRODUCT FEATURES: The Securitron AQD6 Series of $446.00 AQD6 W/ 8 outputs, 8 Relays, Glass Fused, w/ Fire Fuse Rating 597813 AQD6-8F8R Switching Power Supply List Product Number CLK# L L L R: Recognized AQD6-16C 1-844-522-5275 | clarksecurity.com – 51 – Products. Technology. Services. Delivered Globally. Power Supply Power Solutions: DUAL VOLTAGE AMPERAGE SUPERVISION AQM20 SERIES Up to 20A, Multi-Voltage 12 VDC, 24 VDC or 12 VDC and 24 VDC CLK# AQM20 Part # Description CS479063 AQM20-8C8R PRODUCT FEATURES: SPECIFICATIONS: Please refer to the table • ANSI/UL 294 Recognized The Securitron AccuPower® $788.00 AQM20 W/ 8 outputs, 8 Relays, PTC Fused, w/ Fire • Offers output in either 12 VDC or 24 VDC, or both 12 VDC and 24 VDC, field selectable • Rated up to 16As continuous output 12 VDC, 8A continuous output at 24 VDC • Tolerates brownout and overvoltage input at +30% to -30% of selected line voltage, either 120 VAC or 240 VAC • Includes thermal shutdown protection with auto restart • Circuit breaker protects against over-current and reversebattery faults • Battery charger and power supervision included • Dedicated voltage enables faster battery charging even under full load • MagnaCare® lifetime replacement, no fault warranty Switching Power Supply List AQM20 Series of Multi-voltage, Dimensions: supervised switching power 14” x 14” x 4-3/4”enclosure supplies come with a battery Electrical: charger, and provide up to 20 total amps of low-voltage DC • Available with up to 16 Class 2 power limited outputs • Available with configurable access control input/ outputs with fire trigger in either PTC or with fuse/dry contact option, or configurable outputs with fire relay input output. These field selectable units contain two (2) power modules with the flexibility • 120/240 VAC field selectable for delivering 12 VDC, 24 AC input** • LED indicators and form “C” contacts for supervision • Supports up to two (2) 12V or 24V sealed gel, AGM or wet lead acid batteries VDC or 12 and 24 VDC at **Unit ships with default input set to 120 VAC the same time, with up to 16 independently controlled, power limited outputs. Operating Temperature: -4 to +104F [-20 to + 40C] Shipping Weight: L: Listed – 52 – Products. Technology. Services. Delivered Globally. Access 8 Control w/ Fire UL 294 PTC Relay Type 1.04A # of Relays Fuse Type 20/10 8 Y Fuse Rating PDB-8F8R AQM20-8C8R Output Amps Product Number PDB-8F # of Outputs Class 2 Power Limited 12.7 lbs [5.76kg] R R: Recognized 1-844-522-5275 | clarksecurity.com Power Supply Power Solutions: AMPERAGE SUPERVISION AQU128 SERIES 8A / 12 VDC Single-Voltage CLK# AQU128 Part # Description CS491815 AQU128-16C • Provides 8A/12 VDC continuous output • Tolerates brownout or overvoltage input from 90-240 VAC • Includes thermal shutdown protection with auto restart • Circuit breaker protects against overcurrent and reverse battery faults • Low battery disconnect prevents deep discharge • Dedicated voltage enables faster battery charging even under full load • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: Please refer to the table • ANSI/UL 603 Listed • ANSI/UL 294 Listed • ULC S318 Listed The Securitron AccuPower® $524.00 AQU128-16C W/ 16 outputs, Fused PRODUCT FEATURES: Switching Power Supply List AQU128 Series of switching Dimensions: power supplies are single 14” x 14” x 4-3/4” enclosure voltage, supervised units with Electrical: a battery charger. They provide 8A at 12 VDC, with up to 16 • Available with up to 16 Class 2 power limited outputs • Available with configurable access control input/outputs with fire trigger in either PTC or with fuse/ dry contact option, fire relay only, or configurable outputs with fire relay input independently controlled, power limited outputs. • Universal input 90-240 VAC • LED indicators and form “C” contacts for supervision • Supports up to two (2) sealed gel, AGM or wet lead acid batteries Operating Temperature: -4 to +104F [-20 to +40C] Shipping Weight: AQU128-16C AQU128-16C 8 16 Y 1.5A PTC L: Listed 1-844-522-5275 | clarksecurity.com - UL 294 UL 603 ULC S318-96 CSA C22.2 No. 205 Relay Type Fuse Type # of Relays Fuse Rating Output Amps # of Outputs Class 2 Power Limited PDB-8C Product Number 12.5 lbs [5.7kg] L L L L R: Recognized – 53 – Products. Technology. Services. Delivered Globally. Power Supply Accessories Power Solutions: PDB Power Distribution w/Access Control with Fire Trigger CLK# Part # Description CS104436 PDB-8C8R List The PDB splits a main DC power source into eight Class 2 power limited outputs. Each output is individually configurable for Normally On or Normally Off and can change state in response to an alarm condition from either or both supervised triggers, or can remain in its native state. * 8 PTC w/ Relays, Fire Trigger CS502091 PDB-8F8R $213.00 The PDB splits a main DC power source into eight Class 2 power limited outputs. Each output is individually configurable for Normally On or Normally Off and can change state in response to an alarm condition from either or both supervised triggers, or can remain in its native state. * 8 Fused Output with relays, Fire Trigger PRODUCT FEATURES: • Eight power outputs • Eight individually configurable relays with status LEDs • End-of-Line resistor master trigger for Fire System interface • LED indicator for trigger status • Removable terminal blocks for easy connection • Each output individually configurable for: › Fire trigger enabled or disabled › Normally Open or Normally Closed › Continuous output • 8F8R can provide dry contacts by removing fuses • Relay inputs individually configurable for: › Low current open collector › Normally Closed switch › Normally Open switch • MagnaCare® lifetime replacement, no fault warranty $213.00 PDB-8F8R Power Plus Interfaces for Sophisticated Access Control SPECIFICATIONS: • 8F8R Only: › UL 294 Recognized › CAN/ULC 5533-M87 Listed › UL 603 Listed › ULC S318 Listed • 8C8R offers PTC Class 2 power limited outputs • 8F8R offers fused outputs • Uses 20 mA per relay • 7A relays • 8 fused 0.5A outputs The PDB-8F8R and -8C8R split a power supply main output into eight fused- or PTC circuit breaker-protected outputs. Each output is individually configurable to respond and react to access control relay inputs and fire trigger/relay. Dimensions: Board: 3-3/4”H x4-13/16”W x 13/16”D Mounting: 3-7/16”H x 4-1/2”W Shipping Weight 1 lb [0.45kg] PSP SMALL Filtered DC Plug-in Power Supply CLK# Part # Description CS971481 PSP-12 Plug in Transformer -12 volts at 700mA max. capacity Internal thermal fuse. 12 ft. output cable is included. CS971663 PSP-24 List $45.00 Plug in Transformer 24 volts at 350mA max. capacity Internal thermal fuse. 12 ft. output cable is included. PRODUCT FEATURES: • Internal thermal fuse • 12 ft. [3.6m] output cable included • UL listed • 120-240 VAC input • MagnaCare® lifetime replacement, no fault warranty – 54 – Products. Technology. Services. Delivered Globally. $45.00 PSP-12 Small Plug-In Power Supply PSP plug-in DC power supplies are available in 12 volts at 700 mA maximum capacity (model PSP-12) and 24 volts at 350 mA capacity (model PSP-24). PSPs are ideal for powering a wide range of DC devices. Accepts 120-240 VAC input. 1-844-522-5275 | clarksecurity.com Power Supply Accessories Power Solutions: B-12-5 / B-24-5 CLK# Part # Description List CS971275 B-12-5 Lead Acid Back Up Battery, 12VDC, 5Amp CS971531 B-24-5 Lead Acid Back Up Battery, 25VDC, 5Amp $46.00 $104.00 B-12-5 Lead Acid Battery Batteries are not covered under warranty Lead Acid Batteries provide 5 Ah of battery back up when used with BPS power supplies, ensuring continued operation of access control devices when the AC source power is compromised. BR-4 CLK# Part # Description CS435441 BR-4 List B-24-5 $31.00 Bridge Rectifier, 4Amp Bridge Rectifier MagnaCare® lifetime replacement, no fault warranty Converts AC input to full wave rectified DC output with a maximum 4A output capacity. CKL CLK# Part # Description CS334701 CKL List Keyed Cabinet Lock F/ all furnished Securitron Cabinets, 2 keys BR-4 $23.00 Cabinet Key Lock MagnaCare® lifetime replacement, no fault warranty Fits the standard knockout on all Securitron power supply enclosures to protect against tampering and unauthorized access. Includes two (2) keys. MOV CLK# CKL Part # Description CS131094 MOV-50 Metal-Oxide Varistor, 50/PK List $54.00 MOV-50 1-844-522-5275 | clarksecurity.com – 55 – Products. Technology. Services. Delivered Globally. Power Transfers Power Path Solutions: DUAL VOLTAGE FIRE RATED PowerJump ICPT ICPT Inductive Coupling Power Transfer CLK# Part # Description CS502651 ICPT Power Jump Inductive Coupling Power Transfer PRODUCT FEATURES: • Transfers power wirelessly across door gaps of up to 3/16” • Flexible mounting: can be installed on hinge side, latch side or top of frame • Dual-voltage output 12 VDC or 24 VDC field selectable • Continuous or intermittent duty • Recommended f or fail secure devices • Use with electrified locks, latches or other door hardware requiring up to 6 watts (0.5A @12 VDC) of power • Adhesive backed templates for accurate installation • MagnaCare® lifetime replacement, no fault warranty SPECIFICATIONS: • UL 10C Fire Rated, 3 hour • C AN4-S101 (ULC-S104) fire door conformant • ANSI/SDI-BHMA A250.13(+/- 150 psi) Windstorm Listed • FCC Part 15 compliant • Patent: 8,294,302 No Moving Parts, No More Broken Wires, No Need to Core Drill the Door List $230.00 The Securitron PowerJump ICPT Endurance: ports power contactlessly and 2,000,000 cycles invisibly across the door gap to Dimensions: run electrified hardware on the Send Unit (Frame Side) 2-3/4”H x 1-1/4”W x 1-3/8”D door. With flexible installation placement on the latch side, Receive Unit (Door Side) 2-3/4”H x 1-1/4”W x 1-5/8”D hinge side or top of the door, it transfers power without pins Electrical: or wires, eliminating points of Input 24 VDC only 500 mA max vulnerability and wear… and no need to core drill the door! Output 500 mA at 12 VDC 250 mA at 24 VDC Operating Temperature: -40 to +120F [-40 to +49C] 2-3/4" [70mm] 1-5/8" [40mm] 1-1/4" [32mm] Door Side Frame Side Watch how this power transfer works at http://bit.ly/1F7M2j2 – 56 – Products. Technology. Services. Delivered Globally. 1-844-522-5275 | clarksecurity.com Power Transfers Power Path Solutions: EH - Electric Hinge CLK# Part # Description CS331276 EH-45 List $261.00 4.5”X4.5” Electric Transfer Hinge, concealed, 6 Wire PRODUCT FEATURES: • Transfer power with the highest level of concealment • Produces the most aesthetically pleasing appearance • Available in 4-1/2” or 4” hinge length • 500 mA power capability • 6 conductor, 28 gauge wire • 6” pigtail provided for connections • MagnaCare® lifetime replacement, no fault warranty Shipping Weight: 1.10 lbs [0.50kg] Finishes: US32/63025 - Satin Stainless Steel EH Double Duty Hinge for Streamlined - Power Transfer The EH is an efficient, discreet, concealed solution that provides secure power and data transfer from frame to door when streamlined wiring is needed. Each hinge features concealed plug connectors that eliminate separate or exposed wiring. Ultimate concealment for tamper-resistance. FIRE RATED CEPT - Concealed Electrical Power Transfer CLK# Part # Description List CS455889 CEPT-10 10 Wire Concealed Electrical Power Transfer, US32D CS506883 EL-CEPT 10 Wire Concealed Electrical Power Transfer, US32D, ElectroLynx $463.00 CS492760 EL-CEPT-10B 10 Wire Concealed Electrical Power Transfer, US10B/613, ElectroLynx $458.00 PRODUCT FEATURES: • Mortises into the edges of the door and frame • Direct retrofit for competitor products • Tamper resistant • All metal construction including back boxes • 7/8” knockouts on back boxes accommodate EMF-type fittings • Tested to 1,000,000 cycles • Compatible with butt hinges up to 6” and continuous hinges with cutout • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • CEPT-10 includes 8-22 AWG wires plus 2-18 AWG wires for higher- current devices • CEPT-C5E includes CAT5E compatible with 9 - 22 AWG wire stranded conductor, Molex connectors • EL-CEPT is ElectroLynx® compatible with 12-22 AWG wires, ElectroLynx® connectors 1-844-522-5275 | clarksecurity.com $375.00 CEPT Beautifully Crafted, Compact, Secure - Power Transfer SPECIFICATIONS: • ANSI/UL 10C Listed, 3 hour rated • ULC-S318 Listed, 3 hour rated • ANSI/SDI-BHMA A250.13(+/- 150 psi) Windstorm Listed • Florida Building Code Approved • Patents: 8,448,382; 2,714,685 (Canada) The heavy-duty, tamper- Dimensions: electrified hardware on the door. CEPT Housing: 9-1/16”L x 1-3/16”W x 1-7/16”D Shipping Weight: 2.40 lbs [1.09kg] Finishes: US32D/630 - Stainless Steel US04/606 - Dull Brass US10/612 - Dull Bronze US10B/613 - Oil Rubbed Bronze resistant Concealed Electrical Power Transfer (CEPT) securely transfers power and data from the hinge side of the frame to The unit is discreetly concealed between the frame and door when the door is closed. Available in three multi-wire configurations and four finishes, the CEPT complements any architectural setting. – 57 – Products. Technology. Services. Delivered Globally. Power Transfers Power Path Solutions: EPT EPT - Electrical Power Transfer CLK# Part # Description Concealed, Tamper Resistant, Flexible Power and Data Transfer List CS450463 EL-EPT Electrical Power Transfer, Standard Version w/ ElectroLynx CS453868 EL-EPTL Electrical Power Transfer, Long Version w/ ElectroLynx $120.00 CS479257 EL-EPT-SC Electrical Power Transfer, Swing Clear, Standard Version w/ ElectroLynx $130.00 CS225044 EPT Electrical Power Transfer, Standard Version $64.00 CS225045 EPTL Electrical Power Transfer, Long Version $85.00 CS104429 EPT-SC Electrical Power Transfer, Swing Clear,Standard Version $96.00 PRODUCT FEATURES: • Installs in the door and frame edges • Flexible steel shield protects wire bundles up to 5/16” thick • Works with almost any type butt hinge, continuous hinges and some pivot hinges. • Rounded mounting tabs • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: • EPT for standard hinges and pivot hinges less than 3/4” offset • EPTL for extended length • EPT-SC for swing-clear hinges or pivot hinges with larger offset; not for use with center pivot doors • EL- Models are ElectroLynx® compatible including 12-22 AWG wires, ElectroLynx® connectors $99.00 The EPT Electric Power Transfer provides concealed, secure power and data conduit between a frame and door, transmitting power to electrified locks, exit bars and more. Its durable stamped steel housing and flexible spring steel conduit make the EPT suitable for most types of swinging doors with butt or continuous hinges or pivot hinges up to 3/4” offset. The EPT-SC accommodates swing-clear hinges and most pivot hinges. SPECIFICATIONS: • UL 10C Listed • C AN4-S104 Listed • UL 634 Listed (EL-EPT/ EL-EPTL) • ULC/ORD-C634 (EL- EPT/EL-EPTL) • ANSI/SDI-BHMA A250.13 (+/- 60 PSF) Windstorm Listed Dimensions: EPT Housing: 12-3/4”L x 7/8” W x 11/16” D EPTL Housing: 21-3/8”L x 7/8” W x 11/16”D Interior flex shield: 3/8” [9.5mm] Finishes: US26/625 - Bright Chrome plated TSB-C - Door Cord CLK# Part # Description List CS971085 TSB-C 18” Door Cord Power Transfer w/Gray and Black Caps $32.00 CS275143 TSB-CXL 36” Door Cord Power Transfer w/Gray and Black Caps $41.00 PRODUCT FEATURES: • Flexible armored stainless steel cable conduit with plastic end caps • Maximum flexibility for installation site on door/frame • Include both gray and black end caps • Interior diameter: 1/4” [6mm] • MagnaCare® lifetime replacement, no fault warranty PRODUCT OPTIONS: TSB-C Shipping Weight: Simple, Affordable Solution for Durable, Tamper Resistant Power and Data Transfer 0.10 lbs [0.05kg] Finishes: US32/630 - Satin Stainless Steel flex cord, with plastic end caps 1.2" [30mm] 18", 36" [460mm, 920mm] • 18” [460mm] length • 36” [920mm] length 1.2" [30mm] – 58 – Products. Technology. Services. Delivered Globally. The TSB – Door Cord is the simplest and most economical solution for power transfer between a door frame and the door. Designed with an armored stainless steel cable and mounting caps for ease of installation. 1-844-522-5275 | clarksecurity.com WE HAVE WHAT YOU NEED With our expanded ASSA ABLOY inventory, CLARK can help you build COMPLETE Access Control Solutions. CONTROL Electronic Access Control Systems, Panels, Controllers, Software ENTRY Credentials, Readers, Keypads ACCESSORIES Switches, Brackets, Remote Switches EXIT Touch Bars, Electrified Panic Devices, Request to Exit Sensors, Electrification Kits POWER PATH Low Voltage Wire & Cable, Network Cable & Patch Cables, Wire Transfer Hinges, Door Loops LOCK Mag Locks, Strikes, Electrified Locks Plug in Transformers, Boxed & Regulated Power Suppliers, Back Up Batteries CLARK’s 2016 ASSA ABLOY Mini Catalogs at: http://clarksecurity.com/catalog/mini-catalogs Corporate Office CLARK Security Products 4775 Viewridge Ave. San Diego CA 92123-1641 Toll-free: 1 (800) 854-2088 About CLARK: http://clarksecurity.com/about-us Legal Statement: http://anixter.com/legalstatement Mini-Catalog_Securitron_0616 © 2016 Anixter Inc. • 06/16 1-844-522-5275 | clarksecurity.com Products. Technology. Services. Delivered Globally.

Securitron Catalog - Clark Security Products!

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.