Security Console Products

Transcript

Security Console with Touch pad & LCD FS290 Security Console with Touch pad & LCD Features Markets &Applications The FS290 is HI-Performance security console that is for Homes & Businesses with multi-division rooms marketing. The system is full wireless data communication between wireless sensors and wireless external siren. Two partitions separate to Arm/Disarm control for main house and office or garage house both area protect function. It also a PSTN/GSM both of system hand-free phone set for talking and can combine external normal phone set for call-in/out talking function. The GSM module is for 2G system of Tri-Band 900/1800/1900 GSM/GPRS system. It is approved by R&TTE and GCF. The software can via RS232 COM port boot load function for upgrade new software function. Specifications 12-16V DC 1A by AC power cord 450mA (Max) 100mA (Max) 869.25MHz 9.6V/1.5Ahr rechargeable Battery Back up time 8HRS (Min) Working temperature -10 deg C to 60 deg C Power Source Working Current Stand-by Current Working frequency Back-up Battery range Dimensions Weight Package 290L x 180W x 70H (mm) 1650g Dimension: 320L x 230W x 75H (mm) Weight: 2.1kg 5 Two partition Home/Away and Disarm mode & trigger alarm by remote control and sensors. Two partition with total 12 alarm zone on 80pcs wireless sensor accessories. Total environmental protection, intrusion, Smoke/Fire/Gas/ and Sudden Medical Emergencies. Pre-set save 2 phone numbers for alarm call-out send digital data, CONTACT ID . ..ets. Pre-set save 4 phone numbers for alarm call-out play correspondingent Voice messages. Pre-set save 10 speed dialer phone numbers for user call-out talkin function. Pre-set save 3 phone numbers for alarm GSM call-out send alarm event SMS. The alarm SMS with alarm event, sensor number/name and user name address data. Low battery supervision on console and on each individual sensor. EEPROM safely stores 40seconds 4 kind of different Emergency voice messages by user. Can command strategically deployed FS146S/FS148S wireless external siren. Built-in output terminal for connection to any external siren/strobe and NC/NO switch. Built-in 2wire zone input terminal NC/NO type for external wire sensors. Built-in rechargeable back-up battery, Tamper Switch and Power Failure Detector function. Remote hands-free speakerphone, 2-way voice communication. After the connection of emergency call, the called party can listen-in or talk with. Backup line function, in case of disconnects the PSTN. Progress tone detector on dialer tone, ring back tone and busy. Real Door/Window Open/Closed monitoring warns users of any open access points prior to Arming. The LCD is with blue color backlight 10 seconds delay auto OFF. Built-in 16 x 2 digits LCD display for working mode, alarm event and setup manual data. Can combine with phone set, security console or IP voice route transfer to GSM call-out. Touch pad to call-in/out PSTM or GSM hand-free talking function. External phone set call-in/out GSM talking function. Call-in send SMS to setup function and request to reply SMS of working mode and alarm event. It call-in by PSTN or GSM DTMF code to setup working mode or all program function. With 5 channel control turn on/off by wireless control FS172 AC power switch. r