Transcript
CONVERTIBLE CRIB STYLE NO :#314
ORBELLE TRADE INC 347 CLINTON STREET HEMPSTEAD N.Y.11550 516-481-1500 SEE MORE PRODUCTS AT: WWW.ORBELLE.COM
Toddler bed
Day bed
MANUFACTURE DATE:OCT 2011 ALL DIAGRAMS ARE FOR ILLUSTRATION ONLY. Adult bed
ASSEMBLY INSTRUCTION
Read all instructions before assembling crib. Read all insturctions before use of the changing table.Save instructions for future use. Carefully remove and lay out all parts. Familiarize yourself with all diagrams to facilitate the assembly of your crib. Check parts and the enclosed hardware bag with the hardware parts list to be sure all are included and quantities are correct. Failure to assemble the crib in the manner recommended could make the crib hazardous.
1
Warning:Never use this product if there are any loose or missing fasteners, loose joints,broken parts, or torn mesh/fabric. check before assembly and periodically during use. . Do not return to store,call ORBELLE for replacement 516-481-1500 or email
[email protected] For the changing table,the maximum weight of the child is 30lbs,any child over 30lbs, pls don’t use . . MADE IN CHINA
WARNING . Failure to follow these warnings and the instructions could result in serious injury or death. . Read all instructions before assembling crib , keep instructions for future use. . Upon completion of assembly be sure all screws, bolts and fastening devices have been securely tightened. A frequent check should be made. . Never use this product if there are any loose or missing fasteners, loose joints,broken parts , or torn mesh/fabric. check before assembly and periodically during use. Contact ORBELLE for replacement parts and instructional literature if needed. . Never substitute parts, the product including side rails, must be fully erected prior to use. .Discontinue use of the product when child is able to climb out or reaches the height of 35in. (900mm) . . Never place product near window where cords from blinds or drapes can strangle a child. .When child is able to pull to standing posi tion,set mattress/base to lowest adjustment position and remove bumper pads, large toys ,and other objects that could serve as steps for climbing out. A child can trap parts of the body or clothing on loose fasteners . .Never use plastic shipping bag or other plastic film as mattress covers not sold and intended for that purpose, they can cause suffocation . . CAUTION: Any mattress used in this crib must be at least 27-1/4inches(690mm) by 51-5/8 inches(1310mm),with a thickness not exceeding 6 inches(150mm), the dimensions of the mattress shall be taken from seam to seam or edge to edge where appropriate. . Never use a water mattress with this product. . Strings can cause strangulation! Never place items with a string around a child ’s neck,such as hood strings or pacifier cords. Never suspend strings over product or attach strings to toys. . Infants can suffocate in gaps between a mattress too small or too thick and product sides , on soft bedding never add a mattress, pillow,comforter,or padding. . To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advi sed by your physician. . If refinishing,use a non-toxic finish specified for children ’s products. . Infants can suffocate on soft bedding . .Never add a pillow or comforter . . Never place additional padding under an infant . . To help prevent strangulation tighten all fasteners . . A child can trap parts of the body or clothing on loose fasteners . . Follow warnings on all products in a crib . See head panel & mattress support of the product for warnings. Replace teething rail if damaged,cracked or loose. MADE IN CHINA 2
CONNECTION HARDWARE a. 2-4/5”Allen head bolt 10PCS
e.Allen Wrench 1PC
b. 2”Allen head bolt
d.3/5”Allen head bolt
14PCS
4 PCS
f.Wood Dowel 2 PCS
CRIB COMPONENTS G. Right Back Leg (1PC)
J. Right front Leg (1PC)
F. Left Back Leg (1PC)
A. Top Rail (2PCS)
H. Left front Leg (1PC)
B. Front Rail Bottom (1PC)
K. Left Crib Panel (1PC) L. Right Crib Panel (1PC)
C. Back Rail Bottom (1PC)
E. The Stabilizer Bar (1PC)
M. Metal Spring Support Platform (1PC)
3
STEP 1 a a
Attach the right crib panel(L) to the right front leg (J) and the right back leg (G) by using allen head bolts (a) . Then attach the left crib panel (K) to the left front leg (H) and the left back leg (F) by using allen head bolts (a) .
L
G a
a e
J a
STEP 2 b b
A L b b
C
F e
b
G E
K b
Attach the Top rail (A) and the back rail bottom (C) to the left & right back legs (F&G) by using allen head bolts (b). Then attach the stabilizer bar(E) to the left & right crib panels(K&L) by using allen head bolts (b) and wood dowels (f).
STEP 3
G
Locate the metal spring (M) with tabs. Be sure the smooth side of metal spring (M) is faced upward. Position the tabs of metal spring (M) to mount to the selected position onto the legs. Inlert the bolts (d), through the tabs and into thread insets onto the legs, then tighten securely with Allen Wrench (e).
d
d
J
M
F
d
H
STEP 4 b b
A J
b
b
Attach the Top rail (A) and the front rail bottom (B) to the left & right front legs (H&J) by using allen head bolts (b) .
b
B e
b
H 5
CONVERT THE CRIB INTO TODDLER BED TODDLER RAIL FOR CONVERTING TO TODDLER BED ARE NOT INCLUDED
b
J
b b b
D
H 1.Remove the top rail (A) and the front rail bottom (B).
2.Install the mattress support to its lowest position.
3.Install the guard rail (D) as toddler bed by using allen head bolts(b) .
WARNING !
FOR TODDLER BED USE
·FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION. ·DO NOT PLACE BED NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD. ·DO NOT PLACE ITEMS WITH A STRING,CORD, OR RIBBON AROUND A CHILD’S NECK,SUCH AS A HOOD,STRINGS OR PACIFIER CORDS. ·DO NOT SUSPEND STRINGS OVER A TODDLER BED FOR ANY REASON. ·THE MATTRESS INTENDED FOR USE ON THE BED SHALL BE A FULL-SIZE CRIB MATTRESS HAVING THE DIMENSIONS OF 51 5/8 IN.(1310MM) IN LENGTH AND 271/4IN.(690MM) IN WIDTH AND THICKNESS OF 4 IN.(100MM) OR A GREATER THICKNESS AS SPECIFIED BY THE MANUFACTURER. ·THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS THAN 15 MONTHS AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50LBS (22.7KG).
6
CONVERT THE CRIB INTO DAY BED Remove the top rail (A) and the front rail bottom (B) as shown. Install the metal spring support platform (M) in its lowest position.
CONVERT THE CRIB INTO FULL SIZE BED (FRAME RAIL NOT INCLUDED TO CONVERT TO FULL SIZE BED)
1.Remove the Metal Spring Support Platform (M) .Then remove the crib end (K&L) . 2.Use the front panel as foot board . 3.Use the rear panel as head board . 4.connect the front and rear panels by a standard hollywood frame provided by others.
DO NOT RETURN TO STORE CALL OR EMAIL FOR REPLACEMENT 516-481-1500 or customerservice @ orbella.com 7
