Transcript
Océ CS665 Pro
See where color can take you Versatility beyond the ordinary in color production Take your customer satisfaction, performance and profitability to the next level with the Océ CS665 Pro, a stateof-the-art production color printing system that delivers outstanding color quality at 65 ppm. Configured with either an Océ PRISMAsync, EFI® Fiery® or Creo® Color Server Plus, it gives you instant access to flexible media options and the widest selection of finishing configurations at a remarkably low total cost of ownership. Make a splash with beautiful, attention-getting output and see where digital color can take you. Warm-up time
Media sources standard
Type
Less than 7 minutes (at room temperature of
Full-color laser printer/copier/scanner
68ºF
• 3 × 500-sheet trays — Minimum: 5.5" × 7" — Maximum: 13" × 19.2" — 64–256 g/m²
Print engine
Technology
Electrophotographic system, no fusing oil Toner
High-definition polymerized toner, on-the-fly refill Resolution
and rated voltage)
Engine hardware options
• Operator attention light • Hard disk 4 × 40 GB
Media Media handling
• 600 × 1,800 dpi for printing (with smoothing)
• 4" × 6" to 13" × 19.2"
• 256 gradations/8-bit color depth
• 64–300 g/m²
Maximum speed (color and B/W)
• On-the-fly media refill
• 65 ppm (8.5" x 11") • 36 ppm (11" x 17") Maximum monthly print volume
300,000 prints/copies
• Custom sizes
• Auto duplex up to 256 g/m², all sizes • Maximum printable area: 12.5" × 19"
Touch screen monitor plus hard keys
• Margins — Less than 0.2" leading/ trailing edge — Less than 0.1" left/right side
First copy time
Media types
• Color: 6.5 seconds or less • Black & white: 5.0 seconds or less
Plain, color copy, coated, overhead films, labels, tabs, postcards
Memory
4 × 256 MB Engine user interface
• 250-sheet multi-sheet bypass tray — Minimum: 4" × 6" — Maximum: 13" × 19.2" —
64–300 g/m²
Media source options
• 2,500-sheet bulk tray — Minimum: 8" × 7" — Maximum: 13" × 19.2" — 64–300 g/m² — Optional paper conditioning unit • 2 × 3,000-sheet paper input module — Minimum: 4" × 7" (upper drawer) — Minimum: 4" × 6" (lower drawer) — Maximum: 13" × 19.2" — 64–256 g/m² (upper drawer) — 64–300 g/m² (lower drawer) —
Optional paper conditioning unit
FS-520
PK-512
FS-607
PI-502
DF-609
OC-502
RU-504 PB-502
LS-505
• Multi-folding unit FD-503 — Six different folding methods — Punching — Post inserting — Stacking of up to 2,000 sheets
PF-602
RU-506 GP-501
FD-503 FS-521
• Staple finisher FS-521 — 2-point and corner stapling of up to 100 sheets — Stacking/offset stacking of up to 3,000 sheets
• Booklet maker SD-506 — Saddle stitching with face-edge trim — Multi-sheet center and tri-fold
LU-202
SD-506 IC-408
Océ
Scanning & copying Resolution
600 × 600 dpi Maximum speed1 (color and b/w)
• Scanning: 39 opm • Copying: 65 ppm (8.5" x 11”) Multiple
1–9,999 sheets Document feeder (optional)
• 100-sheet capacity for originals — Minimum: 5" × 5.5" — Maximum: 11.5" × 17" — 35–210 g/m² simplex — 50–210 g/m² duplex — 1- or 2-sided — Mixed original detection
Print engine
IC-304
IC-305
Power consumption
• E PA ENERGY STAR® typical electricity consumption 21.2 kWh/week
• Plug-in mode 0.2 W Sound power level
• Standby Lwa = 58.8 dB (A) • Printing Lwa = 78 dB (A) Safety approvals
CE-compliance, EMC mark, TÜV-GS mark (EN 60950-1), CB certificate (compliance with IEC 60950-1), Energy Star Other
Controller options • Océ PRISMAsync color controller • EFI Fiery embedded controller • EFI Fiery external controller
31" x 39" x 41.5"
• Creo Color Server Plus
794 lbs.
Finishing options
Electrical requirements
Finishing modules
• Rated voltage 230 V • Rated current 15 A • Rated frequency 50 Hz
• High-capacity stacker LS-505 — Stacking/offset stacking on a cart — Sample print to sub-tray during production for quality control
• MultiPunch GP-501 — Complete range of punch patterns — Customer exchangeable dies — Punching at full engine speed • All-in-one booklet finisher FS-607 — Light-production booklet making — 2-point and corner stapling — Straight and offset stacking of up to 2,500 sheets — Multi-sheet center and tri-fold — Optional punching — Optional post inserting • Staple finisher FS-520 — 2-point and corner stapling — Stacking/offset stacking of up to 3,000 sheets — Optional punching — Optional post inserting
ISO 15408, WEEE, RoHS compliant
Dimensions (H × W × D) Weight
• Perfect binder PB-502 — Glue-binding with cover trim — Insertion of preprinted covers or cover printing in one run with book block
• Output tray — 150-sheet stacking Detailed specifications of controllers, finishing modules and system configurations of multiple modules are provided in separate specification sheets.
Océ
PRISMAsync Controller
1
With optional document feeder
Océ North America Production Printing Systems 5600 Broken Sound Boulevard Boca Raton, FL 33487
Printing for Professionals
Document Printing Systems 100 Oakview Drive Trumbull, CT 06611
For information and services, call us at: 1.800.523.5444 or visit: www.oceusa.com All rights, including rights created by patent grant or registration of a utility model or design are reserved. Delivery subject to availability, subject to change for technical reasons. All hardware and software names are trade names or trademarks of their respective manufacturers. Specifications subject to change without notice. © Copyright 2009, Océ North America, Inc.
2711-10/09
