Transcript
DC/DC Converter AC/DC Inverters Delay-Lines Pulsetransformers Burst & Surge Filters Harmonic Filters Switching Power Supplies
F LO E T H ELECTRONIC
Am Malfinger Steig 13 86920 Denklingen/Obb. Germany Tel.: 08243-9693-0 Fax: 08243-9693-33 www.floeth-electronic.com
Stand: 14/05
Regulated Single output SMD Case: SO18 package
COMMERCIAL DC/DC Converters
0,5 Watt Series: SDR18
Electrical specifications: +/- 5% capacitor +/- 5% max. 1.0% max. 1,0 % max. 50mVp-p
Input voltage range: Input filter: Output voltage accuracy: Line regulation: Load regulation: Ripple/Noise @20MHz BW:
min. 50% min. 1000V DC min. 2000V DC 1.0 second continuous -40°C to +70°C -55°C to +125°C
Efficiency at full load: Isolation voltage: Optional Part-No.: /H Short circuit protection: Optional Part-No.: /S Operating temp. range: Storage temp. range:
Note: Measured conditions Ta=25°C, Vin = nominal, full load. CAUTION: NO INPUT POLARITY CHANGE ALLOWED!
Model Number single
Input Voltage DC
Output Voltage DC
Output Current mA
SDR18-0505 SDR18-0512 SDR18-0515
5V
5V 12V 15V
100mA 42mA 33mA
SDR18-0905 SDR18-0912 SDR18-0915
9V
5V 12V 15V
100mA 42mA 33mA
SDR18-1205 SDR18-1212 SDR18-1215
12V
5V 12V 15V
100mA 42mA 33mA
SDR18-1505 SDR18-1512 SDR18-1515
15V
5V 12V 15V
100mA 42mA 33mA
SDR18-2405 SDR18-2412 SDR18-2415
24V
5V 12V 15V
100mA 42mA 33mA
Any other input & output voltages available
Mechanical Specifications: 15,24
Footprint: 8,10
PIN CONNECTION:
7,62
NC
+V
18
12
DC/DC 7,10
7,30
2,54x4
9,00 11,10
1
1,80 2,54
1,20
100mA
SDR18-0505 Floeth
12,00
GND
3
7
9
VCC
-V
-V
ALL DIMENSIONS IN MM Tolerance +/-0,25mm All pins on a 2,54mm pitch. Dot marks Pin 1
We can offer EMC - Filter according to EN55011/22 Class B.
Specification may be changed without notice please contact office for verification
115
DC/DC Converter AC/DC Inverters Delay-Lines Pulsetransformers Burst & Surge Filters Harmonic Filters Switching Power Supplies
F LO E T H ELECTRONIC
Am Malfinger Steig 13 86920 Denklingen/Obb. Germany Tel.: 08243-9693-0 Fax: 08243-9693-33 www.floeth-electronic.com
Stand: 28/08
Regulated Single output SMD Case: SO18 package
COMMERCIAL DC/DC Converters
1 Watt Series: SDR18
Electrical specifications: Input voltage range: Input filter: Output voltage accuracy: Line regulation: Load regulation: Ripple/Noise @20MHz BW:
+/- 5% capacitor +/- 5% max. 1.0% max. 1,0 % max. 50mVp-p
Efficiency at full load: Isolation voltage: Optional Part-No.: /H Short circuit protection: Optional Part-No.: /S Operating temp. range: Storage temp. range:
min. 50% min. 1000V DC min. 2000V DC 1,0 second continuous (Only 3V - 5V output voltage) -40°C to +70°C -55°C to +125°C
Note: Measured conditions Ta=25°C, Vin = nominal, full load. CAUTION: NO INPUT POLARITY CHANGE ALLOWED!
Part-No.
SDR18-xxyy
Input Voltage VDC
Output Voltage DC
Output Current mA
3,3, 5, 9, 12, 15, 24, 30
3V - 15V
Depending on Output Voltage
With Short Circuit Protection (Part-No.: /S) SDR18-xx03/S
3,3, 5, 9, 12, 15, 24, 30
3V
200mA
SDR18-xx03,3/S
3,3, 5, 9, 12, 15, 24, 30
3,3V
200mA
SDR18-xx04,85/S
3,3, 5, 9, 12, 15, 24, 30
4,85V
200mA
SDR18-xx05/S
3,3, 5, 9, 12, 15, 24, 30
5V
200mA
Any other output voltages available
Mechanical Specifications:
Footprint:
PIN CONNECTION:
15,24 9,30
7,62
NC
+V
18
12
DC/DC 8,70
0,20
2,54x4
10,00 11,80
1
1,80 2,54
1,20
100mA
SDR18-0505 Floeth
12,70
GND
3
7
9
VCC
-V
-V
ALL DIMENSIONS IN MM Tolerance +/-0,25mm All pins on a 2,54mm pitch. Dot marks Pin 1
We can offer EMC - Filter according to EN55011/22 Class B.
Specification may be changed without notice please contact office for verification
116
