Preview only show first 10 pages with watermark. For full document please download

Seite 38 Cfw2 - Floeth Electronic

   EMBED


Share

Transcript

DC/DC Converter AC/DC Inverters Delay-Lines Pulsetransformers Burst & Surge Filters Harmonic Filters Switching Power Supplies F LO E T H ELECTRONIC Am Malfinger Steig 13 86920 Denklingen/Obb. Germany Tel.: 08243-9693-0 Fax: 08243-9693-33 www.floeth-electronic.com INDUSTRIAL DC/DC Converters Wide input range 1:2 Case style: DIP24 Stand: 29/09 3 - 4 Watt Series: CFW2/ CMW2 base insulation PWM - regulated to various EN/UL/CSA-regulations for those converters voltage on either input/output-voltage higher than 60VDC less than 120VDC Electrical specifications: Input voltage: Output voltage accuracy: Line regulation: Load regulation: Efficiency: Output Ripple & Noise: short circuit protection: wide 1:2 +/- 2% +/- 0,2% +/- 1% min. 65% typ. 150mVp-p fully protected Ambient temperature: -40°C to +71°C max. +105°C Operating temperature: 1000V DC Insulation test voltage: 3kVAC rms optional part-Nr. /3 3,75 Watt part-Nr. /6 4 Watt part-Nr. /2 Case material: CFW2 - polycarbonat / CMW2 - metal Part-No. /5 External -IN & -OUT / COM connection allowed Part-No. /7 3kV DC isolation voltage @ P.-No. /1 & /8 CAUTION: NO INPUT POLARITY CHANGE ALLOWED! Part - No. Single Input Voltage DC CFW2-1203 CFW2-1205 CFW2-1212 CFW2-1215 CFW2-1218 CFW2-1224 CFW2-1228 9-18V* Output Voltage DC Part - No. Dual Output Current Input Voltage DC 3V 5V 12V 15V 18V 24V 28V 1000mA 600mA 250mA 200mA 166mA 125mA 107mA CFW2-1203D CFW2-1205D CFW2-1212D CFW2-1215D CFW2-1218D CFW2-1224D CFW2-1228D Output Voltage DC Output Current +/- 3V +/- 5V +/-12V +/-15V +/-18V +/-24V +/-28V +/-500mA +/-300mA +/-125mA +/-100mA +/- 83mA +/- 62mA +/- 54mA 9-18V* CFW2-2403 CFW2-2405 CFW2-2412 CFW2-2415 CFW2-2418 CFW2-2424 CFW2-2428 16-36V 3V 5V 12V 15V 18V 24V 28V 1000mA 600mA 250mA 200mA 166mA 125mA 107mA CFW2-2403D CFW2-2405D CFW2-2412D CFW2-2415D CFW2-2418D CFW2-2424D CFW2-2428D 16-36V +/- 3V +/- 5V +/-12V +/-15V +/-18V +/-24V +/-28V +/-500mA +/-300mA +/-125mA +/-100mA +/- 83mA +/- 62mA +/- 54mA CFW2-4803 CFW2-4805 CFW2-4812 CFW2-4815 CFW2-4818 CFW2-4824 CFW2-4828 34-75V 3V 5V 12V 15V 18V 24V 28V 1000mA 600mA 250mA 200mA 166mA 125mA 107mA CFW2-4803D CFW2-4805D CFW2-4812D CFW2-4815D CFW2-4818D CFW2-4824D CFW2-4828D 34-75V +/- 3V +/- 5V +/-12V +/-15V +/-18V +/-24V +/-28V +/-500mA +/-300mA +/-125mA +/-100mA +/- 83mA +/- 62mA +/- 54mA Any other output voltages available * Attention: Initial start-up requires Uin min. 10V, then Uin can drop down to min. 9V without leaving output tolerance. PIN CONNECTION: All 3V and 5V output types require a permanent burden of 15-60mA 2,03 (0.08) Bottom View 0,51 DIA. (0.02) Single standard + IN 24 1 NC 23 NC 22 - IN 24 1 + IN 2 NC - IN 23 2 + IN 3 NC Bottom View 31,75 (1.25) 2,54 (0.10) 20,30 (0.80) 3,81 (0.15) 10,20 (0.40) ALL DIMENSIONS IN MM (INCHES) MILLIMETERS +/- 0,5mm ((INCHES +/- 0,02") All pins on a 2,54mm pitch. Specification may be changed without notice please contact office for verification Single Part-Nr. /0 +IN 23 2 -IN +IN 22 3 -IN Bottom View Bottom View - OUT 16 9 NC - OUT 15 10 - OUT NC 15 10 NC + OUT 14 11 + OUT + OUT 14 11 NC - IN 13 12 - IN + OUT Dual standard 15,24 (0.60) Part-Nr. /8 & /3 + IN 13 12 - OUT Dual Part-Nr. /0 Dual Part-Nr. /1 & /3 + IN 24 1 + IN - IN 24 1 + IN - OUT 23 2 - OUT - IN 23 2 + IN +IN 23 2 -IN COM 22 3 COM - IN 22 3 + IN +IN 22 3 -IN 9 COM Bottom View Bottom View Bottom View COM 16 COM 15 10 COM + OUT 15 10 COM NC 15 10 NC + OUT 14 11 + OUT NC 14 11 COM +OUT 14 11 -OUT - IN 13 12 - IN - OUT 13 12 NC 38 We can offer EMC - Filter according to EN55011/22 Class B. DC/DC Converter AC/DC Inverters Delay-Lines Pulsetransformers Burst & Surge Filters Harmonic Filters Switching Power Supplies F LO E T H ELECTRONIC Am Malfinger Steig 13 86920 Denklingen/Obb. Germany Tel.: 08243-9693-0 Fax: 08243-9693-33 www.floeth-electronic.com Stand: 20/08 INDUSTRIAL DC/DC Converters Triple output Wide input range 1:2 Case style: DIP24 3 Watt Plus Series: CFW2/ CMW2 PWM - regulated All outputs cross regulated Electrical specifications: Input voltage: Output voltage accuracy: Line regulation: Load regulation: Efficiency: Output Ripple & Noise: wide 1:2 +/- 3% for all outputs +/- 0,2% for all outputs +/- 1% for all outputs min. 70% typ. 150mVp-p Short circuit protection: fully protected -40°C to +71°C Ambient temperature: max. +105°C Operating temperature: 1000V DC Insulation test voltage: Case material: CFW2 - polycarbonate / CMW2 - metal CAUTION: NO INPUT POLARITY CHANGE ALLOWED! Part - No. Input Voltage DC Output Voltage DC 1 & 2 max. Output Current 1 & 2 Output Voltage DC 3 max. Output Current 3 CFW2-1205D05 CFW2-1212D05 CFW2-1215D05 9-18V +/- 5V +/-12V +/-15V +/-300mA +/-125mA +/-100mA 5V 5V 5V 200mA 200mA 200mA CFW2-2405D05 CFW2-2412D05 CFW2-2415D05 16-36V +/- 5V +/-12V +/-15V +/-300mA +/-125mA +/-100mA 5V 5V 5V 200mA 200mA 200mA Any other output voltages available PIN CONNECTION: 2,03 (0.08) Bottom View 15,24 (0.60) 20,30 (0.80) 0,51 DIA. (0.02) - IN 24 1 + IN - IN 23 2 + IN 31,75 (1.25) + IN 23 2 - IN + IN 22 3 - IN Bottom View Bottom View 2,54 (0.10) 3,81 (0.15) Part No. /0 Part No. /1 COM 16 09 + OUT 15 10 COM NP 15 10 COM NP NC 14 11 COM + OUT 14 11 - OUT - OUT 13 12 +5V 12 + 5V 10,20 (0.40) ALL DIMENSIONS IN MM ( INCHES ) MILLIMETERS +/- 0,25mm (INCHES +/- 0,01") All pins on a 2,54mm pitch. NP = No pin, NC = No connection additional 220µF capacitor recommended for 5V output max. capacitive load 4,7µF at ± 15V output We can offer EMC - Filter according to EN55011/22 Class B. Specification may be changed without notice please contact office for verification 39