Self-propelled Disc-style Whole Tree Chippers

Transcript

Bandit Industries, Inc. - Model 1900 Track - Self-Propelled 19" Disc-Style Whole Tree C... Page 1 of 4 Search ... Home Corporate Product Line Media Guidance Shop Contact Us Bandit Industries About Us          Quality/Innovation News/Stories Service/Support Used Equipment Our Network Self-Propelled Disc-Style Whole Tree Chippers Model 1900 Track - Self-Propelled 19" Disc-Style Whole Tree Chippers The Bandit Model 1900 Track is a 19" diameter capacity self-propelled disc-style whole tree chipper that is considered to be one of the top choices for land and right-ofway clearing contractors looking to chip multiple whole trees, to significantly reduce tree disposal costs, and to simplify operations by eliminating the need to forward and skid material .  The five-wheel feed system, which is considered the best feed system ever developed for a whole tree chipper, combines with a 45-degree angled feed to provide the necessary power, economy, efficiency when chipping larger diameter materials.  The Model 1900 Track is available with engine horsepower options ranging from 540 to 630 horsepower and upholds the Bandit reputation of durability with a heavy-duty frame and heavy-duty hydraulic components. Take the chipper to the trees with the Bandit Model 1900 Track. A powerful Caterpillar 325EL steel track undercarriage is standard with either 700 mm triple grouser track pads or 800 mm double grouser track pads for navigating unstable terrain.  The unit has a ground clearance of 28 inches and a low center of gravity, making the weight of the unit evenly distributed from front to back. These machines can reach areas where it would be difficult to transport and position a towable chipper. The productivity of the Model 1900 Track can be attributed to its powerful hydraulic 5-wheel feed system including (2) 23" long horizontal top feed wheels with (2) top wheels set on an angle and one fixed bottom wheel. These feed wheels are situated in Bandit's patented and proven slide box feed system that can easily pull in and compress whole trees.  Material is fed at an aggressive 135 feet per minute and chipped at a 45-degree angle to the chipper disc, making the unit effective at rapidly slicing and shearing through woody materials. This arrangement requires less energy to chip, and will chip larger diameter materials better than a drum-style chipper because it will consume less fuel, vibrate less, throw harder, and require less horsepower to chip the larger diameter material.   The approximate weight of this unit, including the optional cab and loader options, is 65,000 lbs.  This includes the durable 60" diameter by 3" thick, 3-knife chipper disc with cupped throwers allowing it to capture and throw material out of the discharge at a high velocity, fully loading chip vans to their maximum capacity.   The Model 1900 Track boasts a solid chassis construction using continuous steel welds for structural integrity as opposed to bolt-together techniques.  Component weight is distributed and supported on a sturdy, balanced frame built with 6" x 10" tubular steel that provides the necessary physical reinforcement for chipping. The Model 1900 Track features a 220-degree swivel discharge spout, allowing the operator to discharge chips in all directions. The swivel discharge also allows the operator to switch trailers in seconds; thus, five or six trailers can be spotted at the chipper simultaneously. This powerful chipper will convert a 19-inch diameter whole tree to chips in under a minute and can chip a 25-ton load of chips in under 30 minutes.  A cable remote and radio remote are available for units without a cab and loader so that the chipper can be controlled from an auxiliary machine. High-production land clearers should consider the optional operator cab for comfortable operation.  The cab features 3/8" lexan windows, cab fan, exterior work lights, auto feed tach, fuel sight gauge, deluxe swivel seat with hydraulic controlled joysticks built within the arm rests, GEM engine software monitoring system, throttle control, a ceiling mounted 12 volt AC / heating unit, and an array of monitors and screens to be installed based on customer preference.  Various conveyor options also available to assist the feed system with shorter, brushier material. The steel fuel tank on the Model 1900 Track holds 200 gallons, and the steel hydraulic tank has 150 gallon capacity.    A full palette of standard and custom paint colors give you the freedom to choose the look of your brand or company. The Model 1900 Track, as with all Bandit chippers, is designed and equipped with operator safety in mind. Standard items that accommodate any chipper package include guards that cover all moving parts, engine disabling plugs, disc/drum locks, and other Bandit patented and patent pending devices.   Also, all components on Bandit chippers are designed to be easily accessible to save time on routine maintenance schedules and to reduce downtime by being more serviceable out in the field.  Plus, Bandit whole tree chippers including the Model 1900 Track are protected by an industry-leading 5-year "GUTS" warranty which includes coverage on Bandit manufactured components on the drum/disc and slide box feed system.  The engine also features a 5-year warranty and will be covered by the respective engine supplier. Thus, Bandit chippers have proven over time to be the best economical decision you can make for a long-term investment in a whole tree chipper. http://www.banditchippers.com... Erik Knepler 9/23/2014 Bandit Industries, Inc. - Model 1900 Track - Self-Propelled 19" Disc-Style Whole Tree C... Page 2 of 4 Model 1900 Track -... Model 1900 Track -... Model 1900 Track -... Model 1900 Track -... Model 1900 Track -... Model 1900 Track -... BROCHURE - Whole Tree Chippers (2011) BROCHURE - Biomass Market (2009) BROCHURE - Product Line (2014) BROCHURE - Bandit Product Line (2011) - Spanish Version FLYER - Zenith Cutter Starter Kits (2012) CATALOG - Bandit Wear Parts VIDEO: Model 1900 ... VIDEO: Whole Tree ... STANDARD EQUIPMENT Whole tree control panel (New System) Hydraulic 5-wheel feed system including (2) 23" long horizontal top feed wheels w/ (2) top wheels set on an angle mounted in a slide box and one fixed bottom. Reversing Auto Feed System Engine start panel 220 degree hydraulic swivel discharge with hydraulic chip deflector 60" diameter x 3" thick (3-knife) chipper disc with babbited chipper knives, counter knives, clamps, and all clamping hardware. (Customer to specify chip size). Hydraulic pressure check kit 150 gallon lockable steel hydraulic tank with magnetic drain plug, aluminum fluid level gauge, and gate valve shut-off 200 gallon lockable steel fuel tank with magnetic drain plug and fuel line shut off valve 6" x 10" tubular steel frame Engine disable plug for hood locking pin-preventing engine from operating without pin in place Safety DVD, (2) 6" wide x 9" tall Bandit operator's manuals (one paper copy and one waterproof copy tethered to machine) and (1) engine operator's manual Spanish & English combination safety decals Bandit 5 year "GUTS" warranty (Includes coverage on Bandit manufactured components on the drum/disc and slide box feed system. Engine also features a 5 year warranty and will be covered by respective engine supplier). http://www.banditchippers.com... Erik Knepler 9/23/2014 Bandit Industries, Inc. - Model 1900 Track - Self-Propelled 19" Disc-Style Whole Tree C... Page 3 of 4 PAINT SELECTION Standard Imron Industrial Urethane Bandit Yellow (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane White (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Alert Orange (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Cat. Yellow (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Green (For Whole Tree Chippers please specify Chipper Guard paint color) Standard Imron Industrial Urethane Black (For Whole Tree Chippers please specify Chipper Guard paint color) Special Imron Industrial special paint (please specify color) Special Imron 5000 Paint (please specify color) CAB/LOADER SELECTION Track unit WITHOUT cab and loader (Note: all chipper functions are controlled by radio remote control with tether back up) Track unit WITH cab and HYDRAULIC controlled loader (Features heavy-duty knuckle boom loader with turntable bearing and 4535 Rotobec grapple. Cab features 3/8" lexan windows, cab fan, exterior work lights, auto feed tach, fuel sight gauge, deluxe swivel seat with hydraulic controlled joysticks built within the arm rests, GEM engine software monitoring system, and ceiling mounted A/C / heating unit). ENGINE SELECTION Caterpillar C15, 540 horsepower with over center style clutch and 2 position reversing fan - Tier 4i (Includes Caterpillar 5 year / 5,000 hour "Platinum" engine warranty) CLUTCH SELECTION Standard manual clutch is included with engine TRACK SELECTION Caterpillar 325EL steel track undercarriage (700 MM, 27 1/2" wide track pads), triple grouser (Caterpillar part number 255-1541) Caterpillar 325L steel track undercarriage (600 MM, 23 5/8" wide track pads), single grouser Caterpillar 325EL steel track undercarriage (800 MM, 31 1/2" wide track pads), double grouser INFEED SELECTION Wide profile, tapered infeed hopper WITHOUT infeed conveyor Wide profile, tapered infeed hopper WITH 5 1/2' infeed conveyor with heavy-duty BENT style infeed chain CAB AND LOADER OPTIONS (2) monitors with 7" LCD screens mounted inside operator's cab with (4) cameras mounted on outside of chipper for enhanced operator viewing. Each monitor controls two cameras allowing operator to view a split screen of each camera or switch back and forth between cameras. (Customer to specify where they want the cameras mounted) DTAC Heavy-duty roof mounted heating and air conditioning system. Has a BTU rating of 33,000 in cooling mode and 22,000 in the heating mode. Utilizes a remote mounted, self contained high capacity condenser to ensure maximum operator comfort in the most adverse conditions. ENGINE RELATED OPTIONS Engine pre-cleaner - Engine Air Proheat Engine Heater HYDRAULIC OPTIONS Deluxe hydraulic oil cooler (Hydraulic operated,includes a higher capacity cooler with bypass and reversible hydraulically driven fan that can easily be set up on timed reversing intervals). MISCELLANEOUS OPTIONS Deluxe light package (Includes (7) Hella worklamp lights, (2) are mounted at the top of the infeed on each side, (2) are mounted on each side of the infeed conveyor, (2) on each side of the discharge chute, and (1) on top of the drum/disc hood) 11 horsepower Saylor Beall air compressor (Does not include impact wrench and tools) Dirt seperator For detailed specifications please contact your local authorized Bandit dealer. No used equipment listings of this model available at this time. http://www.banditchippers.com... Erik Knepler 9/23/2014