Preview only show first 10 pages with watermark. For full document please download

Sena 10c Quick Start Guide

   EMBED


Share

Transcript

PREPARATION BASIC OPERATION Knowing the Headset Layout Installing the Headset PAIRING Operating the Buttons Speaker Checking the Battery Level Pairing with Mobile Devices - Phone, Music Making Calls Using the Phone Keypad Using Phone Features After Pairing… 1 Clamp Unit Antenna Camera Button 1 2 Lens Blinking 5 2 Tap the button Microphone Jog Dial 1 Status LED Double tap the button Press and hold the button for 5 seconds Press the two buttons at the same time Rotate the Jog Dial 2 You will hear ascending beeps. “Hello” 1 OFF 3 You will hear descending beeps. “Good bye” Headset Micro HDMI Cable Port Simultaneously press and hold the Jog Dial and the Phone Button for 1 second to turn on or off the headset. Phone Button MicroSD Card Slot Charging LED Blinking 0~30%  You will hear multiple beeps. or or “Hello”   “Phone pairing” Using the Speed Dial “High” 70~100% “Medium” 30~70% “Low” 0~30% Or, press and hold the Jog Dial and the Phone Button for 3 more seconds when the headset turns on. You will hear a triple beep and a voice prompt. Ending Calls or Bluetooth   until you hear a beep Bluetooth You will hear a beep. Sena10C “Speed dial” Charging the Battery   “Your headset is paired” Charging Fully charged Transferring Calls between a mobile phone and the headset Rejecting Calls Adjusting the Volume or 1 2 Voice Menu • Last number redial • Speed dial 1 • Speed dial 2 • Speed dial 3 • Cancel Listening to Music After Pairing… Playing or Pausing Music Speaker and Microphone Port DC Power Charging & Firmware Upgrade Port 30~70% 3 ON 1 Blinking Answering Calls Blinking Turn on the headset and check the battery level via the Status LED. Turning On/Off the Headset 2 70~100% Using the Voice Dialer  You will hear a beep when the volume reaches the maximum or minimum level.  until you hear a beep Tracking Forward or Backward  until you hear a beep  until you hear a double beep AC adapter 1 Rotate While Pressing INTERCOM CAMERA Pairing with Other Headsets Turning On/Off the Camera Headset A Headset B Tagging Videos To Enter Video Tagging Mode ON OFF To Start Video Tagging RADIO SETTING TROUBLESHOOTING Turning On/Off the FM Radio Method1) Using the headset Factory Reset Headset Settings To Exit Video Tagging Mode 1 2 Camera Settings 3 You will hear a double beep sound. If you want to restore the 10C to factory default settings, press and hold the Phone Button for 12 seconds. Tap the Jog Dial. The headset automatically restores the default settings and turns off. “FM on” or “FM off” Fault Reset   “Intercom pairing” Seeking Stations “Video tagging ready” Recording Videos 1 “Video tagging off” OFF “Recording stopped” Rotate While Pressing Saving or Deleting Stations Taking Photos To Save To Delete 2 You can start a two-way intercom conversation with each headset. Quick Start Guide Motorcycle Bluetooth® Camera & Communication System For details about downloading the Sena Device Manager, refer to the leaflet included in the package. After Pairing… 3   “Camera setup” Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click DEVICE SETTING to configure the headset settings. “Recording” Using the Intercom 1   “Configuration menu” If the 10C is not working properly for any reason, push the pin-hole reset button located on the back of the headset. Method2) Using the Sena Device Manager “Tagging complete” ON Follow the steps above to pair with two or more headsets. “Video tagging” Listening to Preset Stations Method3) Using the Sena Smartphone App 1. On your smartphone, download the Sena Smartphone App for Android or iPhone from Google Play or App Store. Refer to www.sena.com/app for more details. 2. Pair your smartphone with the headset.  You will hear a shutter sound. 3. Run the Sena Smartphone App. Swipe the screen to the right and tap Setting to configure the headset settings. 2 “Preset (#)” “(#)” “Save preset (#)” “Delete preset (#)” Sena Technologies, Inc. www.sena.com www.facebook.com/senabluetooth Customer Support: support.sena.com Tel (North America): 408-300-9797  E-mail: [email protected] You can download the full version of the manual and view other Sena products at the Sena website: www.sena.com. 15.May