Transcript
More Precision optoNCDT 1320 // Compact Laser Triangulation Displacement Sensor
Compact Laser Triangulation Displacement Sensor
optoNCDT 1320
Ideal for serial and OEM applications Compact design with integrated controller 312Hz 375Hz 1000Hz
Analog Digital Trigger TeachIn select
Measuring rate up to 2kHz Analogue and digital output Trigger input and teach-in Plug & Play via select button Application-specific presets for fast sensor settings
ATC
Auto Target Compensation
The optoNCDT 1320 is a new laser triangulation sensor with compact size. This series provides the ideal entry-level sensor for precise measurement of displacement, distance and position. The controller is integrated in the housing which considerably simplifies the installation procedure. Due to its extremely compact size, the sensor can also be integrated into restricted installation space. Due to its low weight, the optoNCDT 1320 is ideally suitable for applications where high accelerations occur e.g. on the robot arm or in pick-and-place machines. The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 2kHz. The Auto Target Compensation (ATC) provides stable distance signal control regardless of target colour or brightness. Very small objects can be detected reliably due to the small and sharply projected measurement spot size. A newly defined class of its own The combination of speed, size, performance and application variety defines a new class of laser sensors. The worldwide unique SMART sensor concept combines an integrated web interface with a compact sensor size. The excellent price/performance ratio enables new areas of use, especially for high volume applications in machine integration and factory automation.
With the compact Micro-Epsilon sensors, new application possibilities open up in precisely those areas where conventional laser sensors often perform at their limits. Plug & Play due to unique ease of use The optoNCDT 1320 models enable quick sensor commissioning with just a few clicks using the multifunction sensor button. Therefore, the user has the possibility to use the zero setting/mastering function or the trigger
set up. An intuitive web interface enables the user to carry out extended sensor settings. The settings for the most common surface types can be selected using presets. Using the ‚Standard‘, ‚Changing surfaces‘ and ‚Material with penetration‘ settings, precise measurement results are easily achieved without any complex optimisation. The quality slider enables the sensor to be adapted to static and dynamic processes.
Model
ILD1320
Measuring range
25mm
50mm
Start of measuring range
SMR
20mm
25mm
35mm
Midrange
MMR
25mm
37.5mm
60mm
End of measuring range
EMR
30mm
50mm
85mm
12µm
30µm
60µm
Linearity
10mm
0.12% FSO
Repeatability 1)
1µm
2.5µm
Measuring rate
5µm
0.25kHz / 0.5kHz / 1kHz / 2kHz
Light source
semiconductor laser <1mW, 670nm (red)
Permissable ambient light
10,000lx
Spot diameter ± 10 %
SMR
90 x 120µm
100 x 140µm
90 x 120µm
MMR
45 x 40µm
120 x 130µm
230 x 240µm
EMR smallest diameter
140 x 160µm
390 x 500µm
630 x 820µm
45 x 40µm with 24mm
55 x 50µm with 31mm
70 x 65µm with 42mm
Protection class
IP 65
Laser safety class
class 2 IEC 60825-1 : 2008-05
Temperature stability
± 0.03% FSO/°C
Operation temperature
0 ... +50°C (non-condensing)
Storage temperature
-20 ... +70°C (non-condensing) 1x HTL laser on/off; 1 x HTL multi-function input: trigger in / zero-setting / mastering / teach in (1x error output npn, pnp, push pull)
Control I/O analogue
Output
4..20 mA; free scalable within the nominal range
digital
RS422 / max. 921.6kBaud
Signal processing
14bit
Vibration
2g / 20 ... 500Hz (according to IEC 60068-2-6)
Shock
15g / 6ms / 3 axes (according to IEC 60068-2-29)
Weight
without cable
approx. 30g
with cable 3m
approx. 145g
LED
2 x 3 colour LEDs for power and status button
Operation
select button for zero / teach in / reset / factory setting
web interface
selectable presets
Power supply
11-30V DC, 24V P< 2W
Sensor cable
3m, integrated, open ends
Controller
integrated signal processor EN 61 000-6-3 / DIN EN 61326-1 (class B) EN 61 000-6-2 / DIN EN 61326-1
Electromagnetic compatibility (EMC)
FSO = Full scale output All specifications apply for a diffusely reflecting matt white ceramic target SMR = Start of measuring range; MMR = Midrange; EMR = End of measuring range 1) Measuring rate 1kHz, median 9
20
2.70
2x M3 threads or as mounting holes for M2 3
40
8 SMR
30
46
7.50
6
10 Laser
MR
Limits for free space Keep this area free from other light sources and/or their reflections Y
2
8
MR
SMR
Y
10
20
10
25
25
21
50
35
28
Modifications reserved / Y9761547-A011115GKE
High performance sensors made by Micro-Epsilon
Sensors and systems for displacement and position
Sensors and measurement devices for non-contact temperature measurement
2D/3D profile sensors (laser scanner)
Optical micrometers, fibre optic sensors and fibre optics
Colour recognition sensors, LED analyzers and colour online spectrometer
Measurement and inspection systems
MICRO-EPSILON Headquarters Koenigbacher Str. 15 ∙ 94496 Ortenburg / Germany Tel. +49 (0) 8542 / 168-0 ∙ Fax +49 (0) 8542 / 168-90
[email protected] ∙ www.micro-epsilon.com
