Sensorless Motor Spindle Bm

Transcript

1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:52 PM ページ 1 HAND WORK SOLUTIONS Micro-Grinder Electrically Driven 1 1 EmaxEVO EmaxEVO Emax EVOlution ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" HAND WORK 1,000~40,000 min-1(rpm) ULTRA-PRECISION BRUSHLESS MICRO-GRINDER • Digital display enhances safety and efficiency. • Compact and functional design makes the unit portable. • Soft touch switches permit easy operation and long service life. E2530 / E2550 ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 ESPERT 500 3 3 MA 1,000~50,000 min (rpm) -1 ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 E4000 MA ø0.897" ULTRA-PRECISION BRUSHLESS MICRO-GRINDER • High output power, 200W, and high reliability are achieved by combining a hall-element brushless DC motor and high grade electronics. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p1 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:52 PM ページ 1 HAND WORK SOLUTIONS Micro-Grinder Electrically Driven 1 1 EmaxEVO EmaxEVO Emax EVOlution ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" HAND WORK 1,000~40,000 min-1(rpm) ULTRA-PRECISION BRUSHLESS MICRO-GRINDER • Digital display enhances safety and efficiency. • Compact and functional design makes the unit portable. • Soft touch switches permit easy operation and long service life. E2530 / E2550 ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 ESPERT 500 3 3 MA 1,000~50,000 min (rpm) -1 ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 E4000 MA ø0.897" ULTRA-PRECISION BRUSHLESS MICRO-GRINDER • High output power, 200W, and high reliability are achieved by combining a hall-element brushless DC motor and high grade electronics. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p1 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:52 PM ページ 1-p2 ULTRA-PRECISION BRUSHLESS MICRO-GRINDER Emax EVOlution System Chart 1 CAT. No. Price Model Attachment Motor EmaxEVO ESPERT ROTUS CAT. No. RE11008 Model 1 Control Unit Price CAT. No. Model Price ESPERT IR-310 40,000 min (rpm) Max. (*1) 40,000 min (rpm) Max. (*2) -1 ROTUS -1 Ring Type IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 IMPULSE RE10178 PRESTO II IH-300 40,000 min (rpm) Max. (*1) 40,000 min (rpm) Max. (*2) -1 2811 -1 SHEENUS neo SONIC CUTTER Lever Type LUSTER (Reciprocating motion) Built-in Motor IG-400 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) Straight Type 1483 E2530 / E2550 ø0.897" E3000 - One Piece RE10188 HG-200 ø1.0"/ø0.98" ø0.897" RE10235 iSpeed3 NLS-110 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 27,000 min-1(rpm) Max. (*1) 27,000 min-1(rpm) Max. (*2) Torque Type (*3) BMH-300 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) • • Wide selection of attachments available depending on the application. E3000 - Modular ø1.18" 2 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Long Type E3000 - 80,000rpm E4000 3 E3000 - 80,000rpm MFC-300S (rpm) Max. (*1) 15,000 min 15,000 min-1 -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ 90° Mini Angle Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Speed Reducer · Extension Joint @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 15,000 min (rpm) Max. (*1) 15,000 min (rpm) Max. (*2) 90° Mini Angle Type (Very Small Head) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ MS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" RE10182 IC-300 35,000 min (rpm) Max. (*1) 20,000 min (rpm) Max. (*2) -1 -1 90° Angle Type 4 HES510 -1 HPS Xpeed LS10815 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HES810 HTS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) HES510 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1/15 Speed Reducer RO10228 RG-02 4 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ PARTS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ AIR LINE KIT @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ LUSTER (Reciprocating motion) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 6 30,000 min (rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ENK-410S @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 8086 MS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ • Standard Type Motor with Cord 1,000~40,000 min-1(rpm) @@ @@ @@ @@ @@ @@ @@ @@ 1/4 Speed Reducer RO10214 RG-01 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 5 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ LS-100 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HTS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 45° Angle Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (rpm) Max. (*2) 35,000 min (rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 35,000 min-1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HES810 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ KC-300 (rpm) Max. (*1) 20,000 min @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.0" ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ RE10266 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.897" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ MA @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ NE249 120 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (120V) @@ @@ @@ @@ @@ @@ @@ @@ Extension Joint RE10210 CN-01 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 8224 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 3 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10252 MFC-300M @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.0" ø0.98" E4000 @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ RE10247 MA ø0.897" • Torque Type Motor with Cord 1,000~25,000 min-1(rpm) HPS @@ @@ @@ @@ @@ @@ @@ @@ Xpeed @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 8087 ENK-250T 5 @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ be connected between the motor and the * May attachment as required for increased torque. AIR LINE KIT Optional LS51307 6 ML-8 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) PARTS MINI-LUSTER (Reciprocating motion) 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX EmaxEVO 7 LS11380 SLS-16 35,000 min-1(rpm) Max. (*1) 24,000 min-1(rpm) Max. (*2) SWING-LUSTER (Right to Left motion) Coiled Cord : 4.5 ft 8090 8091 RE18060 HA-500 20,000 min-1(rpm) Max. (*1) 16,000 min-1(rpm) Max. (*2) Hammer Action Type TECHNICAL DATA ENKCD-410C ENKCD-250C for ENK-410S for ENK-250T 8 APPLICATION EXAMPLES INDEX KBS61065 KBS-101 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) 1-p2 FINE BELT SANDER *Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. *1 : Maximum Allowable Speed, intermittent use. *2 : Maximum Allowable Speed, continuous use. *3 :Use 6mm torque Type HG-200 to connect ENK-250T * Order by catalog number. 1-p3 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:52 PM ページ 1-p2 ULTRA-PRECISION BRUSHLESS MICRO-GRINDER Emax EVOlution System Chart 1 CAT. No. Price Model Attachment Motor EmaxEVO ESPERT ROTUS CAT. No. RE11008 Model 1 Control Unit Price CAT. No. Model Price ESPERT IR-310 40,000 min (rpm) Max. (*1) 40,000 min (rpm) Max. (*2) -1 ROTUS -1 Ring Type IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 IMPULSE RE10178 PRESTO II IH-300 40,000 min (rpm) Max. (*1) 40,000 min (rpm) Max. (*2) -1 2811 -1 SHEENUS neo SONIC CUTTER Lever Type LUSTER (Reciprocating motion) Built-in Motor IG-400 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) Straight Type 1483 E2530 / E2550 ø0.897" E3000 - One Piece RE10188 HG-200 ø1.0"/ø0.98" ø0.897" RE10235 iSpeed3 NLS-110 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 27,000 min-1(rpm) Max. (*1) 27,000 min-1(rpm) Max. (*2) Torque Type (*3) BMH-300 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) • • Wide selection of attachments available depending on the application. E3000 - Modular ø1.18" 2 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Long Type E3000 - 80,000rpm E4000 3 E3000 - 80,000rpm MFC-300S (rpm) Max. (*1) 15,000 min 15,000 min-1 -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ 90° Mini Angle Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Speed Reducer · Extension Joint @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 15,000 min (rpm) Max. (*1) 15,000 min (rpm) Max. (*2) 90° Mini Angle Type (Very Small Head) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ MS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" RE10182 IC-300 35,000 min (rpm) Max. (*1) 20,000 min (rpm) Max. (*2) -1 -1 90° Angle Type 4 HES510 -1 HPS Xpeed LS10815 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HES810 HTS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) HES510 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1/15 Speed Reducer RO10228 RG-02 4 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ PARTS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ AIR LINE KIT @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ LUSTER (Reciprocating motion) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 6 30,000 min (rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ENK-410S @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 8086 MS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ • Standard Type Motor with Cord 1,000~40,000 min-1(rpm) @@ @@ @@ @@ @@ @@ @@ @@ 1/4 Speed Reducer RO10214 RG-01 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 5 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ LS-100 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HTS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 45° Angle Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (rpm) Max. (*2) 35,000 min (rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 35,000 min-1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HES810 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ KC-300 (rpm) Max. (*1) 20,000 min @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.0" ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ RE10266 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.897" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ MA @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ NE249 120 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (120V) @@ @@ @@ @@ @@ @@ @@ @@ Extension Joint RE10210 CN-01 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 8224 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 3 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10252 MFC-300M @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.0" ø0.98" E4000 @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ RE10247 MA ø0.897" • Torque Type Motor with Cord 1,000~25,000 min-1(rpm) HPS @@ @@ @@ @@ @@ @@ @@ @@ Xpeed @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 8087 ENK-250T 5 @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ be connected between the motor and the * May attachment as required for increased torque. AIR LINE KIT Optional LS51307 6 ML-8 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) PARTS MINI-LUSTER (Reciprocating motion) 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX EmaxEVO 7 LS11380 SLS-16 35,000 min-1(rpm) Max. (*1) 24,000 min-1(rpm) Max. (*2) SWING-LUSTER (Right to Left motion) Coiled Cord : 4.5 ft 8090 8091 RE18060 HA-500 20,000 min-1(rpm) Max. (*1) 16,000 min-1(rpm) Max. (*2) Hammer Action Type TECHNICAL DATA ENKCD-410C ENKCD-250C for ENK-410S for ENK-250T 8 APPLICATION EXAMPLES INDEX KBS61065 KBS-101 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) 1-p2 FINE BELT SANDER *Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. *1 : Maximum Allowable Speed, intermittent use. *2 : Maximum Allowable Speed, continuous use. *3 :Use 6mm torque Type HG-200 to connect ENK-250T * Order by catalog number. 1-p3 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p4 “Emax EVOlution” FEATURES 1 EmaxEVO display enhances safety and efficiency. • Digital Compact functional design makes the unit portable. • Soft touchand switches permit easy operation and long service life. • New Advanced Design Control Unit 1 Ultra-Precision Micro-Grinder EmaxEVO ESPERT ROTUS ESPERT Advanced Control Function Diversity for work efficiency NAKANISHI Smart Switch 2 Types of Motors ROTUS IMPULSE PRESTO II IMPULSE Upgraded Digital Display. EVOLUTION Speed Control with Flash Load Indicator. SHEENUS neo SONIC CUTTER Provides choice of various applications. The switch provides a click sensation. A confirmation tone is reacted by the control unit when the switch is operated. The motor type is distinguishable by the switch color. 2 Motors A and B can be connected to cover multiple work requirements. *Simultaneous motor operation is not allowable • Standard Type Motor • Torque Type Motor 1,000~40,000 min-1 (rpm) (ENK-410S) 1,000~25,000 min-1 (rpm) (ENK-250T) PRESTO II Blue Green * Exclusive use for Emax EVOlution 2 Motor speed digital display iSpeed3 Memory Speed Function FiXpeed Emax EVOlution and Electer E-max have different motor cord pin configurations. ® E2530 / E2550 ø1.0"/ø0.98" Load Meter E2530 / E2550 •••••• ø0.897" E3000 - One Piece Continuous load area • :: Intermittent • : Overload load area • E3000 - Modular An exclusive new feature of the Emax EVOlution is the FiXpeed® system allowing independent foot switch operation for the A and B Motors. A Motor foot switch can be on/off and B Motor foot switch can be variable speed. This function brings unprecedented versatility and workability. ø1.18" SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" One Touch Tool Changing E3000 - One Piece • Ring Type (IR-310) Emax EVOlution Electer E-max E3000 - Modular ø1.18" Easy twist open/close chuck ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 3 MA ø0.897" Advanced User Friendly Design Excellent Durability Auto Cruise Function New Industrial Design. EVOLUTION new user friendly case meets design and performance requirements. The control unit is equipped with an Auto Cruise Function. While using foot control for work, anyone could fix the motor at any speed by the embedded motor switch. Once speed is set, foot pedal control is not required. This function eliminates foot fatigue during operation. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 Forward / Reverse Select Switch HTS Forward/Reverse rotation can be selected. HPS Xpeed 6 motion. Suitable performance for finish grinding. Various sizes ranging from ultra-small diameter (0.3 mm) are available for each attachment. Furthermore, collet replacement can be easily performed without wrench. superior quietness and smoothness from • Provides low speed to high speed. Capable of infinite applications with 14 different handpieces and 3 types of intermediate attachments. ROTUS system. 7 APPLICATION EXAMPLES EVO-S (Standard Type) E-max-T Emax EVOlution Control Unit CAT. No. Model Specifications Price Motor B INDEX 8224 (120V) NE249 120 • Weight : 5 lb. 1.13 oz. • Power Source : AC120V, 50-60Hz • Dimensions : W5.12" x D10.0" x H3.82" E-max-S (Standard Type) E-max-T (Torque Type) 4 T (N·cm) 8 MS HTS HPS Xpeed 5 6 EVO-T 5 Memory Speed Function FiXpeed® ø1.18" AIR LINE KIT EVO-T (Torque Type) TECHNICAL DATA ø1.0" ø0.98" HES810 17 Types of Attachments for All Types of Applications PARTS 6 ø0.897" HES510 Emax EVOlution vs E-max Torque Characteristic Easy to operate by one finger MA 4 *Interchangeable with attachments form the E-max and ø4.72" Speed Control Volume 3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" The chuck section of Emax EVOlution has a special built-in dust protection mechanism that prevents entry of foreign materials such as chips, and provides superior durability as well. HES510 AIR LINE KIT Various Collet Size Special Dust Protection Mechanism (patented) 4 5 performance brushless motor eliminates the • High need of changing carbon brushes. variation is minimal even when load changes. • RPM Allowing difficult and stable cutting in stress free E4000 EVO-S 3 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES E-max-S 2 INDEX ON/OFF Function 1 Motor A ON/OFF Function 10000 Accessories : Handpiece Holder : 1 pc., Handpiece Stand : 1 pc. Power Supply Cord : 1 pc. 1-p4 20000 30000 40000 N { /min-1(rpm) } * Order by catalog number. 1-p5 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p4 “Emax EVOlution” FEATURES 1 EmaxEVO display enhances safety and efficiency. • Digital Compact functional design makes the unit portable. • Soft touchand switches permit easy operation and long service life. • New Advanced Design Control Unit 1 Ultra-Precision Micro-Grinder EmaxEVO ESPERT ROTUS ESPERT Advanced Control Function Diversity for work efficiency NAKANISHI Smart Switch 2 Types of Motors ROTUS IMPULSE PRESTO II IMPULSE Upgraded Digital Display. EVOLUTION Speed Control with Flash Load Indicator. SHEENUS neo SONIC CUTTER Provides choice of various applications. The switch provides a click sensation. A confirmation tone is reacted by the control unit when the switch is operated. The motor type is distinguishable by the switch color. 2 Motors A and B can be connected to cover multiple work requirements. *Simultaneous motor operation is not allowable • Standard Type Motor • Torque Type Motor 1,000~40,000 min-1 (rpm) (ENK-410S) 1,000~25,000 min-1 (rpm) (ENK-250T) PRESTO II Blue Green * Exclusive use for Emax EVOlution 2 Motor speed digital display iSpeed3 Memory Speed Function FiXpeed Emax EVOlution and Electer E-max have different motor cord pin configurations. ® E2530 / E2550 ø1.0"/ø0.98" Load Meter E2530 / E2550 •••••• ø0.897" E3000 - One Piece Continuous load area • :: Intermittent • : Overload load area • E3000 - Modular An exclusive new feature of the Emax EVOlution is the FiXpeed® system allowing independent foot switch operation for the A and B Motors. A Motor foot switch can be on/off and B Motor foot switch can be variable speed. This function brings unprecedented versatility and workability. ø1.18" SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" One Touch Tool Changing E3000 - One Piece • Ring Type (IR-310) Emax EVOlution Electer E-max E3000 - Modular ø1.18" Easy twist open/close chuck ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 3 MA ø0.897" Advanced User Friendly Design Excellent Durability Auto Cruise Function New Industrial Design. EVOLUTION new user friendly case meets design and performance requirements. The control unit is equipped with an Auto Cruise Function. While using foot control for work, anyone could fix the motor at any speed by the embedded motor switch. Once speed is set, foot pedal control is not required. This function eliminates foot fatigue during operation. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 Forward / Reverse Select Switch HTS Forward/Reverse rotation can be selected. HPS Xpeed 6 motion. Suitable performance for finish grinding. Various sizes ranging from ultra-small diameter (0.3 mm) are available for each attachment. Furthermore, collet replacement can be easily performed without wrench. superior quietness and smoothness from • Provides low speed to high speed. Capable of infinite applications with 14 different handpieces and 3 types of intermediate attachments. ROTUS system. 7 APPLICATION EXAMPLES EVO-S (Standard Type) E-max-T Emax EVOlution Control Unit CAT. No. Model Specifications Price Motor B INDEX 8224 (120V) NE249 120 • Weight : 5 lb. 1.13 oz. • Power Source : AC120V, 50-60Hz • Dimensions : W5.12" x D10.0" x H3.82" E-max-S (Standard Type) E-max-T (Torque Type) 4 T (N·cm) 8 MS HTS HPS Xpeed 5 6 EVO-T 5 Memory Speed Function FiXpeed® ø1.18" AIR LINE KIT EVO-T (Torque Type) TECHNICAL DATA ø1.0" ø0.98" HES810 17 Types of Attachments for All Types of Applications PARTS 6 ø0.897" HES510 Emax EVOlution vs E-max Torque Characteristic Easy to operate by one finger MA 4 *Interchangeable with attachments form the E-max and ø4.72" Speed Control Volume 3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" The chuck section of Emax EVOlution has a special built-in dust protection mechanism that prevents entry of foreign materials such as chips, and provides superior durability as well. HES510 AIR LINE KIT Various Collet Size Special Dust Protection Mechanism (patented) 4 5 performance brushless motor eliminates the • High need of changing carbon brushes. variation is minimal even when load changes. • RPM Allowing difficult and stable cutting in stress free E4000 EVO-S 3 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES E-max-S 2 INDEX ON/OFF Function 1 Motor A ON/OFF Function 10000 Accessories : Handpiece Holder : 1 pc., Handpiece Stand : 1 pc. Power Supply Cord : 1 pc. 1-p4 20000 30000 40000 N { /min-1(rpm) } * Order by catalog number. 1-p5 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p6 1 EmaxEVO ESPERT ROTUS “Emax EVOlution” MOTOR RING TYPE STANDARD SET Motor for Capabilities for a wide variety of applications. Excellent balance and motor power for smooth speed and handling. IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 1,000~40,000 min-1(rpm) * New Ring Type IR-310 is the standard attachment for Emax EVOlution standard set EV410-IR (Electrically Driven) Smart Switch. • NAKANISHI High performance samarium cobalt magnet. • High accuracy, lightweight, compact, high reliability and superior • durability. reduction of RF noise. • Major Provides extremely quiet operation from low to high speed with • stepless speed adjustment. ESPERT ø1.0"/ø0.98" CAT.No. E2530 / E2550 8231 (120V) ø0.897" E3000 - One Piece E3000 - Modular Model EV410-IR Torque Motor (ENK-250T) Motor IR-310 ENK-410S Micro Grinder (IR-310+ENK-410S) : 1 pc. Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Control Unit (NE249 120) : 1 pc. Standard Handpiece Holder : 1 pc. Equipment Handpiece Stand : 1 pc. Power Supply Cord : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 2 pcs. L Shaped Wrench : 1 pc. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 4 PRESTO II ENK-410S 3 Speed 1,000~40,000 min (rpm) 1,000~25,000 min (rpm) Weight (w/o Cord) 3.17 oz. 5.19 oz. Max. Torque 4.3 cN · m 4.8 cN · m Output Power 73W 76W 30000 40000 iSpeed3 E2530 / E2550 -1 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" ø0.897" CAT. No. E3000 - 80,000rpm 8086 STANDARD TYPE MOTOR ENK-410S 1,000~40,000 min -1 E4000 3 (rpm) combination of high speed, lightweight, small diameter •Excellent and high torque. This lightweight and compact general-use type ø0.897" is perfect for precision work. ø0.96" MS 2 20000 ø1.18" MA ø1.18" SHEENUS neo SONIC CUTTER 2 ENK-250T -1 3.82" ø1.0" ø0.98" IMPULSE ENK-250T N { /min-1(rpm) } ENK-410S CAT. No. RING TYPE TORQUE SET Model 8086 ENK-410S Switch color : Blue Standard Accessories Price 1,000~25,000 min-1(rpm) 8087 TORQUE TYPE MOTOR ENK-250T 4.25" for Emax EVOlution torque set EV250-IR 7 8 APPLICATION EXAMPLES INDEX 1-p6 8232 (120V) Model EV250-IR Price Attachment Motor IR-310 ENK-250T Micro Grinder (IR-310+ENK-250T) : 1 pc. Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Control Unit (NE249 120) : 1 pc. Standard Handpiece Holder : 1 pc. Equipment Handpiece Stand : 1 pc. Power Supply Cord : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 1 pc. L Shaped Wrench : 1 pc. HTS -1 HPS (rpm) Xpeed the best of both high speed and high torque. •Combines It is perfect for applications requiring large burs. ø1.12" CAT.No. HES810 1,000~25,000 min * New Ring Type IR-310 is the standard attachment 5 TECHNICAL DATA MS HES510 CAT. No. AIR LINE KIT PARTS ø1.0" ø0.98" 4 HPS 6 ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" • Straight Cord : 4.5 ft • Pin Wrench (K-233) : 1 pc. For heavy duty and larger tools, Torque type promises to extend operation ranges. HES810 Xpeed MA ø1.18" HES510 HTS ROTUS 5 10000 Motor Model Price Attachment Standard Motor (ENK-410S) 6 Motor Specifications E2530 / E2550 4 Emax EVOlution TORQUE CHARACTERISTIC GRAPH 1 iSpeed3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1 EmaxEVO T (cN·m) “Emax EVOlution” STANDARD SET 5 AIR LINE KIT CAT. No. Model 8087 ENK-250T Switch color : Green Standard Accessories • Straight Cord : 4.5 ft Price 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 1-p7 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p6 1 EmaxEVO ESPERT ROTUS “Emax EVOlution” MOTOR RING TYPE STANDARD SET Motor for Capabilities for a wide variety of applications. Excellent balance and motor power for smooth speed and handling. IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 1,000~40,000 min-1(rpm) * New Ring Type IR-310 is the standard attachment for Emax EVOlution standard set EV410-IR (Electrically Driven) Smart Switch. • NAKANISHI High performance samarium cobalt magnet. • High accuracy, lightweight, compact, high reliability and superior • durability. reduction of RF noise. • Major Provides extremely quiet operation from low to high speed with • stepless speed adjustment. ESPERT ø1.0"/ø0.98" CAT.No. E2530 / E2550 8231 (120V) ø0.897" E3000 - One Piece E3000 - Modular Model EV410-IR Torque Motor (ENK-250T) Motor IR-310 ENK-410S Micro Grinder (IR-310+ENK-410S) : 1 pc. Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Control Unit (NE249 120) : 1 pc. Standard Handpiece Holder : 1 pc. Equipment Handpiece Stand : 1 pc. Power Supply Cord : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 2 pcs. L Shaped Wrench : 1 pc. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 4 PRESTO II ENK-410S 3 Speed 1,000~40,000 min (rpm) 1,000~25,000 min (rpm) Weight (w/o Cord) 3.17 oz. 5.19 oz. Max. Torque 4.3 cN · m 4.8 cN · m Output Power 73W 76W 30000 40000 iSpeed3 E2530 / E2550 -1 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" ø0.897" CAT. No. E3000 - 80,000rpm 8086 STANDARD TYPE MOTOR ENK-410S 1,000~40,000 min -1 E4000 3 (rpm) combination of high speed, lightweight, small diameter •Excellent and high torque. This lightweight and compact general-use type ø0.897" is perfect for precision work. ø0.96" MS 2 20000 ø1.18" MA ø1.18" SHEENUS neo SONIC CUTTER 2 ENK-250T -1 3.82" ø1.0" ø0.98" IMPULSE ENK-250T N { /min-1(rpm) } ENK-410S CAT. No. RING TYPE TORQUE SET Model 8086 ENK-410S Switch color : Blue Standard Accessories Price 1,000~25,000 min-1(rpm) 8087 TORQUE TYPE MOTOR ENK-250T 4.25" for Emax EVOlution torque set EV250-IR 7 8 APPLICATION EXAMPLES INDEX 1-p6 8232 (120V) Model EV250-IR Price Attachment Motor IR-310 ENK-250T Micro Grinder (IR-310+ENK-250T) : 1 pc. Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Control Unit (NE249 120) : 1 pc. Standard Handpiece Holder : 1 pc. Equipment Handpiece Stand : 1 pc. Power Supply Cord : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 1 pc. L Shaped Wrench : 1 pc. HTS -1 HPS (rpm) Xpeed the best of both high speed and high torque. •Combines It is perfect for applications requiring large burs. ø1.12" CAT.No. HES810 1,000~25,000 min * New Ring Type IR-310 is the standard attachment 5 TECHNICAL DATA MS HES510 CAT. No. AIR LINE KIT PARTS ø1.0" ø0.98" 4 HPS 6 ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" • Straight Cord : 4.5 ft • Pin Wrench (K-233) : 1 pc. For heavy duty and larger tools, Torque type promises to extend operation ranges. HES810 Xpeed MA ø1.18" HES510 HTS ROTUS 5 10000 Motor Model Price Attachment Standard Motor (ENK-410S) 6 Motor Specifications E2530 / E2550 4 Emax EVOlution TORQUE CHARACTERISTIC GRAPH 1 iSpeed3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1 EmaxEVO T (cN·m) “Emax EVOlution” STANDARD SET 5 AIR LINE KIT CAT. No. Model 8087 ENK-250T Switch color : Green Standard Accessories • Straight Cord : 4.5 ft Price 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 1-p7 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p8 “Emax EVOlution” & “ROTUS” ATTACHMENTS CAT. No. RE11008 RING TYPE ATTACHMENT IR-310 1 ROTUS 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) IMPULSE Weight : 3.25 oz. Simple, no wrench bur replacement. Wrench is not required to exchange the chuck. Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) Optional Collets : CHH-[][] are shown in page (6-p2) Ring Type Attachment CAT. No. Model RE11008 IR-310 1 grip to eliminate slipping. ø0.98" • • • • ø0.51" ESPERT 2 The resistance produced by cutting and •grinding is absorbed by a special rubber 4.02" weight for comfortable gripping. EmaxEVO SHEENUS neo SONIC CUTTER RE10188 TORQUE TYPE ATTACHMENT HG-200 Perfectly designed for powerful and delicate •cutting and grinding, and made slim and light 2.52" PRESTO II CAT. No. • Chuck is tightened by a Wrench. • Weight : 7.41 oz. • Collet Standard Size : ø1/4" (CHG-6.35) Optional Collets : CHG-[][] are shown in page (6-p2) 27,000 min (rpm) Max. (*1) 27,000 min-1(rpm) Max. (*2) -1 Torque Type Attachment Model RE10188 HG-200 Price Standard Accessories Price Standard Accessories • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench : 1 pc. • Collet ø1/4" (CHG-6.35) : 1 pc. • Wrench (10 x 10) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Pin Wrench (K-233) : 1 pc. ø1.0"/ø0.98" RE10235 For Deep Hole Grinding LONG ATTACHMENT BMH-300 E2530 / E2550 RE10178 LEVER TYPE ATTACHMENT IH-300 ø1.18" Perfectly designed for powerful and delicate •cutting and grinding, and made slim and light 2.36" weight for comfortable gripping. ø1.0"/ø0.98" ø0.897" E4000 3 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) MA ø1.0" ø0.98" • • • • ø0.55" E3000 - 80,000rpm Weight : 2.19 oz. Just turn the lever to exchange the bur. Wrench is not required to exchange the chuck. Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) Optional Collets : CHH-[][] are shown in page (6-p2) Lever Type Attachment CAT. No. Model This unique slim body makes it ideal for •cutting and grinding the bottom surface 4.72" of deep ribs or holes. ø0.51" CAT. No. E3000 - Modular ø0.897" 2.45" 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) Long Attachment for Deep Hole Grinding CAT. No. Model RE10235 BMH-300 Price Standard Accessories • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. IH-300 2811 STRAIGHT TYPE ATTACHMENT IG-400 Light weight ergonomically designed •with minimal vibration for extended use. High precision NK Micron Collet for •maximum tool retention. 2.21" 0.71" HPS PARTS 7 • Weight : 1.94 oz. • Collet Standard Size : ø1/8" (NKM6-3.175) Optional Collets : NKM6-[][] are shown in page (6-p6) 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) AIR LINE KIT 6 CAT. No. Ideal for chamfering and deburring the •inside of slit pipe. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 2811 Model IG-400 ø0.33" Minimum Inner Diameter : ø0.79" Weight : 1.76 oz. Standard Collet : ø1.6 mm (K-252) Speed Reduction Ratio : 10/11 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) Model RE10247 MFC-300S ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø1.6 mm *Please use it with Speed Reducer. (ROTUS Air Motor) CAT. No. MS Price Standard Accessories HPS Xpeed 5 • Collet ø1.6 mm (K-252) : 1 pc. • Chuck Wrench (K-232) : 1 pc. • Pin Wrench (K-233) : 1 pc. AIR LINE KIT 6 Straight Type Attachment CAT. No. • • • • Standard Accessories Price CAT. No. RE10252 For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-300M • Collet ø1/8" (NKM6-3.175) : 1 pc • Collet Nut (CHN-6) : 1 pc. • Wrench (9 x 9), (15 x 17) : 1 pc. each • Bar Wrench (PCR-30) : 1 pc. The smallest 90˚Angle type head is suitable •for chamfering and deburring the inside of 3.74" TECHNICAL DATA 2.73" the slit pipe. 0.37" 8 ø1.18" ø0.897" RE10247 For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-300S 0.54" CAT. No. HTS 5 ø0.897" E3000 - One Piece ø1.0" ø0.98" 3.78" 2.77" HES810 Xpeed ø1.0"/ø0.98" E2530 / E2550 ø1.18" RE10178 HES510 E2530 / E2550 MA • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1), (6 x 4.5) : 1 pc. each • Pin Wrench (K-233) : 1 pc. Price Standard Accessories ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 SHEENUS neo SONIC CUTTER E3000 - Modular • Weight : 5.50 oz. • Wrench is not required to exchange the chuck. • Collet Standard Size : ø1/8" (CHM-3.175) Optional Collets : CHM-[][] are shown in page (6-p4) ø1.18" MS PRESTO II iSpeed3 CAT. No. E2530 / E2550 E3000 - One Piece ROTUS 2 iSpeed3 ø0.897" ESPERT IMPULSE *Use 6mm torque Type HG-200 to connect ENK-250T *Please use it with Speed Reducer. (ROTUS Air Motor) CAT. No. EmaxEVO APPLICATION EXAMPLES ø0.27" INDEX • • • • 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) Minimum Inner Diameter : ø0.51" Weight : 1.66 oz. Standard Collet : ø1.6 mm (K-253) Speed Reduction Ratio : 10/11 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø1.6 mm (Very Small Head) *Please use it with Speed Reducer. (ROTUS Air Motor) 1-p8 CAT. No. Model RE10252 MFC-300M Standard Accessories Price • Collet ø1.6 mm (K-253) : 1 pc. • Chuck Wrench (K-232) : 1 pc. • Pin Wrench (K-233) : 1 pc. Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p9 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p8 “Emax EVOlution” & “ROTUS” ATTACHMENTS CAT. No. RE11008 RING TYPE ATTACHMENT IR-310 1 ROTUS 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) IMPULSE Weight : 3.25 oz. Simple, no wrench bur replacement. Wrench is not required to exchange the chuck. Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) Optional Collets : CHH-[][] are shown in page (6-p2) Ring Type Attachment CAT. No. Model RE11008 IR-310 1 grip to eliminate slipping. ø0.98" • • • • ø0.51" ESPERT 2 The resistance produced by cutting and •grinding is absorbed by a special rubber 4.02" weight for comfortable gripping. EmaxEVO SHEENUS neo SONIC CUTTER RE10188 TORQUE TYPE ATTACHMENT HG-200 Perfectly designed for powerful and delicate •cutting and grinding, and made slim and light 2.52" PRESTO II CAT. No. • Chuck is tightened by a Wrench. • Weight : 7.41 oz. • Collet Standard Size : ø1/4" (CHG-6.35) Optional Collets : CHG-[][] are shown in page (6-p2) 27,000 min (rpm) Max. (*1) 27,000 min-1(rpm) Max. (*2) -1 Torque Type Attachment Model RE10188 HG-200 Price Standard Accessories Price Standard Accessories • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench : 1 pc. • Collet ø1/4" (CHG-6.35) : 1 pc. • Wrench (10 x 10) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Pin Wrench (K-233) : 1 pc. ø1.0"/ø0.98" RE10235 For Deep Hole Grinding LONG ATTACHMENT BMH-300 E2530 / E2550 RE10178 LEVER TYPE ATTACHMENT IH-300 ø1.18" Perfectly designed for powerful and delicate •cutting and grinding, and made slim and light 2.36" weight for comfortable gripping. ø1.0"/ø0.98" ø0.897" E4000 3 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) MA ø1.0" ø0.98" • • • • ø0.55" E3000 - 80,000rpm Weight : 2.19 oz. Just turn the lever to exchange the bur. Wrench is not required to exchange the chuck. Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) Optional Collets : CHH-[][] are shown in page (6-p2) Lever Type Attachment CAT. No. Model This unique slim body makes it ideal for •cutting and grinding the bottom surface 4.72" of deep ribs or holes. ø0.51" CAT. No. E3000 - Modular ø0.897" 2.45" 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) Long Attachment for Deep Hole Grinding CAT. No. Model RE10235 BMH-300 Price Standard Accessories • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. IH-300 2811 STRAIGHT TYPE ATTACHMENT IG-400 Light weight ergonomically designed •with minimal vibration for extended use. High precision NK Micron Collet for •maximum tool retention. 2.21" 0.71" HPS PARTS 7 • Weight : 1.94 oz. • Collet Standard Size : ø1/8" (NKM6-3.175) Optional Collets : NKM6-[][] are shown in page (6-p6) 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) AIR LINE KIT 6 CAT. No. Ideal for chamfering and deburring the •inside of slit pipe. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 2811 Model IG-400 ø0.33" Minimum Inner Diameter : ø0.79" Weight : 1.76 oz. Standard Collet : ø1.6 mm (K-252) Speed Reduction Ratio : 10/11 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) Model RE10247 MFC-300S ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø1.6 mm *Please use it with Speed Reducer. (ROTUS Air Motor) CAT. No. MS Price Standard Accessories HPS Xpeed 5 • Collet ø1.6 mm (K-252) : 1 pc. • Chuck Wrench (K-232) : 1 pc. • Pin Wrench (K-233) : 1 pc. AIR LINE KIT 6 Straight Type Attachment CAT. No. • • • • Standard Accessories Price CAT. No. RE10252 For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-300M • Collet ø1/8" (NKM6-3.175) : 1 pc • Collet Nut (CHN-6) : 1 pc. • Wrench (9 x 9), (15 x 17) : 1 pc. each • Bar Wrench (PCR-30) : 1 pc. The smallest 90˚Angle type head is suitable •for chamfering and deburring the inside of 3.74" TECHNICAL DATA 2.73" the slit pipe. 0.37" 8 ø1.18" ø0.897" RE10247 For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-300S 0.54" CAT. No. HTS 5 ø0.897" E3000 - One Piece ø1.0" ø0.98" 3.78" 2.77" HES810 Xpeed ø1.0"/ø0.98" E2530 / E2550 ø1.18" RE10178 HES510 E2530 / E2550 MA • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1), (6 x 4.5) : 1 pc. each • Pin Wrench (K-233) : 1 pc. Price Standard Accessories ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 SHEENUS neo SONIC CUTTER E3000 - Modular • Weight : 5.50 oz. • Wrench is not required to exchange the chuck. • Collet Standard Size : ø1/8" (CHM-3.175) Optional Collets : CHM-[][] are shown in page (6-p4) ø1.18" MS PRESTO II iSpeed3 CAT. No. E2530 / E2550 E3000 - One Piece ROTUS 2 iSpeed3 ø0.897" ESPERT IMPULSE *Use 6mm torque Type HG-200 to connect ENK-250T *Please use it with Speed Reducer. (ROTUS Air Motor) CAT. No. EmaxEVO APPLICATION EXAMPLES ø0.27" INDEX • • • • 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) Minimum Inner Diameter : ø0.51" Weight : 1.66 oz. Standard Collet : ø1.6 mm (K-253) Speed Reduction Ratio : 10/11 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø1.6 mm (Very Small Head) *Please use it with Speed Reducer. (ROTUS Air Motor) 1-p8 CAT. No. Model RE10252 MFC-300M Standard Accessories Price • Collet ø1.6 mm (K-253) : 1 pc. • Chuck Wrench (K-232) : 1 pc. • Pin Wrench (K-233) : 1 pc. Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p9 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p10 “Emax EVOlution” & “ROTUS” ATTACHMENTS & ACCESSORIES CAT. No. RE10182 90°ANGLE ATTACHMENT IC-300 Optional Accessories for IC-300 and KC-300 Rubber Pad 2.26" 1 Product ø0.50" Description CAT. No. Model O.D. Grits package Price Drive Motor & Control Unit ESPERT ESPERT ROTUS IMPULSE 35,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) PRESTO II Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 Rubber Pad (Small) RE11915 —— ø10 mm (ø0.39") _ ROTUS 1 pc./pack IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 SHEENUS neo SONIC CUTTER 2 90˚Angle attachment with ø1/8" •(ø3.175 mm) Collet. Most suitable for iSpeed3 polishing flat surfaces, corners and internal surfaces of pipes with paper disk mounted on rubber pad. E2530 / E2550 E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Rubber Pad (Med) 90º Angle Attachment *Please use it with Speed Reducer. (ROTUS Air Motor) ø0.897" E3000 - One Piece 1 EmaxEVO 0.80" EmaxEVO CAT. No. • Reduction Ratio : 3/4 • Weight : 1.59 oz. • Collet Standard Size : ø1/8" (CHC-3.175) Optional Collets : CHC-[][] are shown in page (6-p2) RE10182 Model Standard Accessories IC-300 Price RE11916 —— ø20 mm (ø0.79") _ ø1.0"/ø0.98" 1 pc./pack E2530 / E2550 ø0.897" E3000 - One Piece • Collet ø1/8" (CHC-3.175) : 1 pc. • Standard Accessories : 1 set • Chuck Wrench (K-231) : 1 pc. • Pin Wrench (K-233) : 1 pc. E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm CAT. No. E4000 RE10266 45°ANGLE ATTACHMENT KC-300 E4000 3 Rubber Pad (Large) RE11917 —— ø30 mm (ø1.18") _ 3 1 pc./pack 2.44" MA MA ø0 ø0.897" ø0.897" Drive Motor & Control Unit ø1.0" ø0.98" 0. 79 " ø1.0" ø0.98" .50 " ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 35,000 min (rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) -1 Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Sandpaper Disk (Paper Type for Metals, Adhesive Back) Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 Product Description 4 HES510 Sandpaper Disk for small pad HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 • Ideal for the work at 45˚angle, especially corners and deep concaves. 45º Angle Attachment *Please use it with Speed Reducer. (ROTUS Air Motor) • Use the motor in reverse rotation for clockwise rotation. • Speed Reduction Ratio : 3/4 • Weight : 1.59 oz. • Collet Standard Size : ø1/8" (CHC-3.175) Optional Collets : CHC-[][] are shown in page (6-p2) CAT. No. Model Standard Accessories RE10266 KC-300 • Collet ø1/8" (CHC-3.175) : 1 pc. • Standard Accessories : 1 set • Chuck Wrench (K-231) : 1 pc. • Pin Wrench (K-233) : 1 pc. Price Sandpaper Disk for med. pad PARTS 7 Standard Accessories for IC-300 and KC-300 TECHNICAL DATA 8 APPLICATION EXAMPLES Description (Small) Rubber Pad (Large) INDEX Sandpaper Disk 1-p10 (Med) CAT. No. Model O.D. Grits Q'ty RE11915 RE11916 RE11917 LS10904 LS10910 RE11804 RE11810 RE11904 RE11910 —— —— —— S-018 S-060 M-018 M-060 L-018 L-060 ø 10mm (ø 0.39") ø 20mm (ø 0.79") ø 30mm (ø 1.18") ø 11mm (ø 0.43") ø 11mm (ø 0.43") ø 21mm (ø 0.83") ø 21mm (ø 0.83") ø 31mm (ø 1.22") ø 31mm (ø 1.22") _ _ _ 1 1 1 5 5 5 5 5 5 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. # 180 # 600 # 180 # 600 # 180 # 600 Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. Sandpaper Disk for large pad CAT. No. Model LS10900 LS10902 LS10904 LS10905 LS10906 LS10908 LS10910 LS10912 LS10914 LS10915 RE11800 RE11802 RE11804 RE11805 RE11806 RE11808 RE11810 RE11812 RE11814 RE11815 RE11900 RE11902 RE11904 RE11905 RE11906 RE11908 RE11910 RE11912 RE11914 RE11925 S-008 S-012 S-018 S-024 S-032 S-040 S-060 S-080 S-100 S-150 M-008 M-012 M-018 M-024 M-032 M-040 M-060 M-080 M-100 M-150 L-008 L-012 L-018 L-024 L-032 L-040 L-060 L-080 L-100 L-150 O.D. Grits ø11 mm (ø0.43") ø21 mm (ø0.83") ø31 mm (ø1.22") # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 #1,500 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 #1,500 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 #1,500 package Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 100 pcs./pack 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 1-p11 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p10 “Emax EVOlution” & “ROTUS” ATTACHMENTS & ACCESSORIES CAT. No. RE10182 90°ANGLE ATTACHMENT IC-300 Optional Accessories for IC-300 and KC-300 Rubber Pad 2.26" 1 Product ø0.50" Description CAT. No. Model O.D. Grits package Price Drive Motor & Control Unit ESPERT ESPERT ROTUS IMPULSE 35,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) PRESTO II Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 Rubber Pad (Small) RE11915 —— ø10 mm (ø0.39") _ ROTUS 1 pc./pack IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 SHEENUS neo SONIC CUTTER 2 90˚Angle attachment with ø1/8" •(ø3.175 mm) Collet. Most suitable for iSpeed3 polishing flat surfaces, corners and internal surfaces of pipes with paper disk mounted on rubber pad. E2530 / E2550 E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Rubber Pad (Med) 90º Angle Attachment *Please use it with Speed Reducer. (ROTUS Air Motor) ø0.897" E3000 - One Piece 1 EmaxEVO 0.80" EmaxEVO CAT. No. • Reduction Ratio : 3/4 • Weight : 1.59 oz. • Collet Standard Size : ø1/8" (CHC-3.175) Optional Collets : CHC-[][] are shown in page (6-p2) RE10182 Model Standard Accessories IC-300 Price RE11916 —— ø20 mm (ø0.79") _ ø1.0"/ø0.98" 1 pc./pack E2530 / E2550 ø0.897" E3000 - One Piece • Collet ø1/8" (CHC-3.175) : 1 pc. • Standard Accessories : 1 set • Chuck Wrench (K-231) : 1 pc. • Pin Wrench (K-233) : 1 pc. E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm CAT. No. E4000 RE10266 45°ANGLE ATTACHMENT KC-300 E4000 3 Rubber Pad (Large) RE11917 —— ø30 mm (ø1.18") _ 3 1 pc./pack 2.44" MA MA ø0 ø0.897" ø0.897" Drive Motor & Control Unit ø1.0" ø0.98" 0. 79 " ø1.0" ø0.98" .50 " ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 35,000 min (rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) -1 Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Sandpaper Disk (Paper Type for Metals, Adhesive Back) Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 Product Description 4 HES510 Sandpaper Disk for small pad HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 • Ideal for the work at 45˚angle, especially corners and deep concaves. 45º Angle Attachment *Please use it with Speed Reducer. (ROTUS Air Motor) • Use the motor in reverse rotation for clockwise rotation. • Speed Reduction Ratio : 3/4 • Weight : 1.59 oz. • Collet Standard Size : ø1/8" (CHC-3.175) Optional Collets : CHC-[][] are shown in page (6-p2) CAT. No. Model Standard Accessories RE10266 KC-300 • Collet ø1/8" (CHC-3.175) : 1 pc. • Standard Accessories : 1 set • Chuck Wrench (K-231) : 1 pc. • Pin Wrench (K-233) : 1 pc. Price Sandpaper Disk for med. pad PARTS 7 Standard Accessories for IC-300 and KC-300 TECHNICAL DATA 8 APPLICATION EXAMPLES Description (Small) Rubber Pad (Large) INDEX Sandpaper Disk 1-p10 (Med) CAT. No. Model O.D. Grits Q'ty RE11915 RE11916 RE11917 LS10904 LS10910 RE11804 RE11810 RE11904 RE11910 —— —— —— S-018 S-060 M-018 M-060 L-018 L-060 ø 10mm (ø 0.39") ø 20mm (ø 0.79") ø 30mm (ø 1.18") ø 11mm (ø 0.43") ø 11mm (ø 0.43") ø 21mm (ø 0.83") ø 21mm (ø 0.83") ø 31mm (ø 1.22") ø 31mm (ø 1.22") _ _ _ 1 1 1 5 5 5 5 5 5 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. # 180 # 600 # 180 # 600 # 180 # 600 Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. Sandpaper Disk for large pad CAT. No. Model LS10900 LS10902 LS10904 LS10905 LS10906 LS10908 LS10910 LS10912 LS10914 LS10915 RE11800 RE11802 RE11804 RE11805 RE11806 RE11808 RE11810 RE11812 RE11814 RE11815 RE11900 RE11902 RE11904 RE11905 RE11906 RE11908 RE11910 RE11912 RE11914 RE11925 S-008 S-012 S-018 S-024 S-032 S-040 S-060 S-080 S-100 S-150 M-008 M-012 M-018 M-024 M-032 M-040 M-060 M-080 M-100 M-150 L-008 L-012 L-018 L-024 L-032 L-040 L-060 L-080 L-100 L-150 O.D. Grits ø11 mm (ø0.43") ø21 mm (ø0.83") ø31 mm (ø1.22") # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 #1,500 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 #1,500 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 #1,500 package Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 100 pcs./pack 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 1-p11 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p12 “Emax EVOlution” & “ROTUS” ATTACHMENTS The Features of LUSTER NLS-110 (Built-in Motor) 4.69" 3.36" ESPERT EmaxEVO ESPERT ROTUS 4.72" IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" • NAKANISHI Smart Switch • High Power ø1.50" tilt angle of grindstone arbor is adjustable. •The The grinding surface can be set at any angle between 0 and 360˚ enabling grinding of bottom, right, left and top surfaces without moving the machine itself. Control Unit LUSTER (NLS-110) is a powerful reciprocating stroke polisher equipped with 1/4 Speed Reducer to multiply the torque by 4 times. • Reciprocating Stroke : Emax EVOlution Control Unit (NE249 120) 0~7,600 times/min. Fully adjustable. Ultra-Precision Grinder • All important parts are hardened by with comfortable • Designed rubber-grip Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation. CAT. No. Model Standard Accessories 1483 NLS-110 • Standard Accessories : 1 set • Lubrication Oil • Lubrication Nozzle for LUSTER Price E3000 - One Piece Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment ø1.18" Model Stroke Range Standard Accessories Price Drive Motor & Control Unit • High Power LUSTER (LS-100) is a powerful reciprocating stroke polisher. • Reciprocating Stroke : 0~7,600 times/min. Fully adjustable. • Designed with comfortable rubber-grip Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 • Standard Accessories : 1 set 3 MA MS 1.77" Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Drive Motor & Control Unit ø0.69" 4.72" enabling grinding of bottom, right, left and top surfaces without moving the machine itself. heat treatment to provide excellent durability. E3000 - Modular ø1.18" 3.43" ø0.79" tilt angle of grindstone arbor is adjustable. •The The grinding surface can be set at any angle between 0 and 360˚ AIR LINE KIT INDEX • Weight : 4.59 oz. • Max. tool shank diameter ø0.13", Screw clamp type. • Various attachment tools and holders are provided as standard accessories. ø1.0" ø0.98" •Stroke Range : 0~6 mm adjustable by stroke cam 5 8 ø1.0"/ø0.98" E2530 / E2550 The Features of SWING-LUSTER SLS-16 4.69" Xpeed APPLICATION EXAMPLES E2530 / E2550 -1 The Features of LUSTER LS-100 Grinder • Ultra-Precision All important parts are hardened by PRESTO II ø0.897" HPS 7 IMPULSE iSpeed3 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) HTS TECHNICAL DATA Page 5-p2 2 LS51307 ML-8 0.8mm 4 HES810 PARTS Page 1-p33 ROTUS SHEENUS neo SONIC CUTTER CAT. No. HES510 6 Page 1-p4 ROTUS Air Line Kit (AL-H1207F) & AFC-45 30,000 min (rpm) Max. (*1) 30,000 min (rpm) Max. (*2) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 Page 1-p7 Air Motor (IM-301) Reciprocating Motion Polishing Finisher LUSTER ø1.0" ø0.98" MS Emax EVOlution Control Unit (NE249 120) ø0.897" • Weight : 1 lb. 12.22 oz. • Max. tool shank diameter ø0.25", Screw clamp type. • Various types of attachment tools are provided as standard accessories. heat treatment to provide excellent durability. Electric Motor (ENK-410S) (ENK-250T) or Stroke (variable) : Approx 0~9,000 times/min. • Reciprocating Range (fixed) : 0.8 mm. • Stroke to pencil type grip, it is most suitable for polishing • Due narrow grooves, details, etc. compact design and minimal vibration keep • Lightweight, the hand free from fatigue for long continuous operation. using the grindstone holder provided, various tools such • By as oil stone, super stone, diamond files, etc. can be used. Page 1-p4 -1 ø1.18" 1 Drive Motor & Control Unit ø0.59" EmaxEVO •Stroke Range : 0~6 mm adjustable by stroke cam ø0.79" 1 The Features of MINI-LUSTER ML-8 speed grinding and polishing operations can be •High performed while maintaining the fine and delicate feeling of hand polishing. Lightweight pencil type design makes it easy to work in tight areas. Ergonomically designed to provide high sensitivity for precision work. Easily adjustable stroke length allows efficient work on minute areas or large sections. • • • • Weight : 4.48 oz. • Reciprocating Stroke (variable) : 0~9,000 times/min • Stroke range (variable) : 0~1.6 mm • Max. tool shank diameter ø0.20", Screw clamp type. Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT Pencil-Type Reciprocating Polishing Finisher SWING-LUSTER Attachment CAT. No. Model LS11380 SLS-16 Standard Accessories Price 6 PARTS • Standard Accessories : 1 set 35,000 min (rpm) Max. (*1) 24,000 min (rpm) Max. (*2) *Please use it with Speed Reducer. (ROTUS Air Motor) -1 -1 7 TECHNICAL DATA 8 • Weight : 1 lb. 7.99 oz. • Max. tool shank diameter ø0.25", Screw clamp type. • Various types of attachment tools are provided as standard accessories. APPLICATION EXAMPLES Reciprocating Motion Miniature Polisher LUSTER INDEX CAT. No. Model Standard Accessories LS10815 LS-100 • Standard Accessories : 1 set • Lubrication Oil • Lubrication Nozzle for LUSTER Price 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 1-p12 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p13 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:53 PM ページ 1-p12 “Emax EVOlution” & “ROTUS” ATTACHMENTS The Features of LUSTER NLS-110 (Built-in Motor) 4.69" 3.36" ESPERT EmaxEVO ESPERT ROTUS 4.72" IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" • NAKANISHI Smart Switch • High Power ø1.50" tilt angle of grindstone arbor is adjustable. •The The grinding surface can be set at any angle between 0 and 360˚ enabling grinding of bottom, right, left and top surfaces without moving the machine itself. Control Unit LUSTER (NLS-110) is a powerful reciprocating stroke polisher equipped with 1/4 Speed Reducer to multiply the torque by 4 times. • Reciprocating Stroke : Emax EVOlution Control Unit (NE249 120) 0~7,600 times/min. Fully adjustable. Ultra-Precision Grinder • All important parts are hardened by with comfortable • Designed rubber-grip Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation. CAT. No. Model Standard Accessories 1483 NLS-110 • Standard Accessories : 1 set • Lubrication Oil • Lubrication Nozzle for LUSTER Price E3000 - One Piece Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment ø1.18" Model Stroke Range Standard Accessories Price Drive Motor & Control Unit • High Power LUSTER (LS-100) is a powerful reciprocating stroke polisher. • Reciprocating Stroke : 0~7,600 times/min. Fully adjustable. • Designed with comfortable rubber-grip Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 • Standard Accessories : 1 set 3 MA MS 1.77" Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Drive Motor & Control Unit ø0.69" 4.72" enabling grinding of bottom, right, left and top surfaces without moving the machine itself. heat treatment to provide excellent durability. E3000 - Modular ø1.18" 3.43" ø0.79" tilt angle of grindstone arbor is adjustable. •The The grinding surface can be set at any angle between 0 and 360˚ AIR LINE KIT INDEX • Weight : 4.59 oz. • Max. tool shank diameter ø0.13", Screw clamp type. • Various attachment tools and holders are provided as standard accessories. ø1.0" ø0.98" •Stroke Range : 0~6 mm adjustable by stroke cam 5 8 ø1.0"/ø0.98" E2530 / E2550 The Features of SWING-LUSTER SLS-16 4.69" Xpeed APPLICATION EXAMPLES E2530 / E2550 -1 The Features of LUSTER LS-100 Grinder • Ultra-Precision All important parts are hardened by PRESTO II ø0.897" HPS 7 IMPULSE iSpeed3 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) HTS TECHNICAL DATA Page 5-p2 2 LS51307 ML-8 0.8mm 4 HES810 PARTS Page 1-p33 ROTUS SHEENUS neo SONIC CUTTER CAT. No. HES510 6 Page 1-p4 ROTUS Air Line Kit (AL-H1207F) & AFC-45 30,000 min (rpm) Max. (*1) 30,000 min (rpm) Max. (*2) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 Page 1-p7 Air Motor (IM-301) Reciprocating Motion Polishing Finisher LUSTER ø1.0" ø0.98" MS Emax EVOlution Control Unit (NE249 120) ø0.897" • Weight : 1 lb. 12.22 oz. • Max. tool shank diameter ø0.25", Screw clamp type. • Various types of attachment tools are provided as standard accessories. heat treatment to provide excellent durability. Electric Motor (ENK-410S) (ENK-250T) or Stroke (variable) : Approx 0~9,000 times/min. • Reciprocating Range (fixed) : 0.8 mm. • Stroke to pencil type grip, it is most suitable for polishing • Due narrow grooves, details, etc. compact design and minimal vibration keep • Lightweight, the hand free from fatigue for long continuous operation. using the grindstone holder provided, various tools such • By as oil stone, super stone, diamond files, etc. can be used. Page 1-p4 -1 ø1.18" 1 Drive Motor & Control Unit ø0.59" EmaxEVO •Stroke Range : 0~6 mm adjustable by stroke cam ø0.79" 1 The Features of MINI-LUSTER ML-8 speed grinding and polishing operations can be •High performed while maintaining the fine and delicate feeling of hand polishing. Lightweight pencil type design makes it easy to work in tight areas. Ergonomically designed to provide high sensitivity for precision work. Easily adjustable stroke length allows efficient work on minute areas or large sections. • • • • Weight : 4.48 oz. • Reciprocating Stroke (variable) : 0~9,000 times/min • Stroke range (variable) : 0~1.6 mm • Max. tool shank diameter ø0.20", Screw clamp type. Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT Pencil-Type Reciprocating Polishing Finisher SWING-LUSTER Attachment CAT. No. Model LS11380 SLS-16 Standard Accessories Price 6 PARTS • Standard Accessories : 1 set 35,000 min (rpm) Max. (*1) 24,000 min (rpm) Max. (*2) *Please use it with Speed Reducer. (ROTUS Air Motor) -1 -1 7 TECHNICAL DATA 8 • Weight : 1 lb. 7.99 oz. • Max. tool shank diameter ø0.25", Screw clamp type. • Various types of attachment tools are provided as standard accessories. APPLICATION EXAMPLES Reciprocating Motion Miniature Polisher LUSTER INDEX CAT. No. Model Standard Accessories LS10815 LS-100 • Standard Accessories : 1 set • Lubrication Oil • Lubrication Nozzle for LUSTER Price 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 1-p12 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p13 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:54 PM ページ 1-p14 “Emax EVOlution” & “ROTUS” ACCESSORIES memo 1 EmaxEVO Product Model CAT. No. ESPERT ROTUS IMPULSE Grindstone Holder VES 0.98" Max. clampable size : Thickness 0.43" x width 0.53" VEA ø0.12" ø1.0"/ø0.98" LS10834 E3000 - One Piece SHEENUS neo SONIC CUTTER (1 pc./pack) LS10867 E2530 / E2550 (1 pc./pack) ø1.0"/ø0.98" (1 pc.) E2530 / E2550 (1 pc.) ø0.897" E3000 - One Piece 08 0. [1] 2 iSpeed3 Tool Holder with Spring FVA 1.77" ø0.897" Rectangular Pad " E3000 - Modular 0. 0 31 ø1.18" LS10891 LKE-2A " .71 E3000 - Modular (1 pc./pack) ø1.18" " (1 pc.) ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" [2] E3000 - 80,000rpm Rod for Rectangular Pad FBA-2 2.24" E4000 LS10848 E3000 - 80,000rpm Angle Rod 2.60" ø0.897" LS10853 NGA MA (1 pc./pack) ø0.897" (1 pc.) ø1.0" ø0.98" ø1.18" ø1.0" ø0.98" ø1.18" ø0.12" Diamond Grindstone 0.16" MS 0.63" 0.05" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" DLA4 x 1-100 1.97" 1.97" 4 Ceramic Fiber Grindstone (#1,200) 0.04" 0.2 4" HES510 HPS 3 [3] MA HTS E4000 (1 pc./pack) (1 pc.) 3 HES810 LS10918 60737 MS (1 pc./pack) (1 pc.) (1 pc.) (1 pc.) (1 pc.) HES510 HES810 HTS 1 HPS 2 [3] [4] [4] 5 Xpeed 5 [2] AIR LINE KIT 6 6 PARTS PARTS 7 TECHNICAL DATA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 (2 pcs./pack) • Illustration Usage Xpeed AIR LINE KIT ESPERT PRESTO II (1 pc.) E2530 / E2550 E2530 / E2550 1 EmaxEVO IMPULSE (1 pc./pack) 3.07" [4] MINI-LUSTER SWING-LUSTER ML-8 SLS-16 (1 pc.) Grindstone Holder 0.79" iSpeed3 LS10875 1.18" ø0.12" 1.22" 2 Price (Package) LUSTER NLS-110 LS-100 ROTUS ø0.13" Max. clampable size : Thickness 0.18" x width 0.43" PRESTO II SHEENUS neo SONIC CUTTER • Each product is provided with tool as standard. Tool and standard accessories for LUSTER, MINI-LUSTER, SWING-LUSTER 7 [1] TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p14 * Order by catalog number. 1-p15 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:54 PM ページ 1-p14 “Emax EVOlution” & “ROTUS” ACCESSORIES memo 1 EmaxEVO Product Model CAT. No. ESPERT ROTUS IMPULSE Grindstone Holder VES 0.98" Max. clampable size : Thickness 0.43" x width 0.53" VEA ø0.12" ø1.0"/ø0.98" LS10834 E3000 - One Piece SHEENUS neo SONIC CUTTER (1 pc./pack) LS10867 E2530 / E2550 (1 pc./pack) ø1.0"/ø0.98" (1 pc.) E2530 / E2550 (1 pc.) ø0.897" E3000 - One Piece 08 0. [1] 2 iSpeed3 Tool Holder with Spring FVA 1.77" ø0.897" Rectangular Pad " E3000 - Modular 0. 0 31 ø1.18" LS10891 LKE-2A " .71 E3000 - Modular (1 pc./pack) ø1.18" " (1 pc.) ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" [2] E3000 - 80,000rpm Rod for Rectangular Pad FBA-2 2.24" E4000 LS10848 E3000 - 80,000rpm Angle Rod 2.60" ø0.897" LS10853 NGA MA (1 pc./pack) ø0.897" (1 pc.) ø1.0" ø0.98" ø1.18" ø1.0" ø0.98" ø1.18" ø0.12" Diamond Grindstone 0.16" MS 0.63" 0.05" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" DLA4 x 1-100 1.97" 1.97" 4 Ceramic Fiber Grindstone (#1,200) 0.04" 0.2 4" HES510 HPS 3 [3] MA HTS E4000 (1 pc./pack) (1 pc.) 3 HES810 LS10918 60737 MS (1 pc./pack) (1 pc.) (1 pc.) (1 pc.) (1 pc.) HES510 HES810 HTS 1 HPS 2 [3] [4] [4] 5 Xpeed 5 [2] AIR LINE KIT 6 6 PARTS PARTS 7 TECHNICAL DATA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 (2 pcs./pack) • Illustration Usage Xpeed AIR LINE KIT ESPERT PRESTO II (1 pc.) E2530 / E2550 E2530 / E2550 1 EmaxEVO IMPULSE (1 pc./pack) 3.07" [4] MINI-LUSTER SWING-LUSTER ML-8 SLS-16 (1 pc.) Grindstone Holder 0.79" iSpeed3 LS10875 1.18" ø0.12" 1.22" 2 Price (Package) LUSTER NLS-110 LS-100 ROTUS ø0.13" Max. clampable size : Thickness 0.18" x width 0.43" PRESTO II SHEENUS neo SONIC CUTTER • Each product is provided with tool as standard. Tool and standard accessories for LUSTER, MINI-LUSTER, SWING-LUSTER 7 [1] TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p14 * Order by catalog number. 1-p15 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:54 PM ページ 1-p16 “Emax EVOlution” & “ROTUS” ATTACHMENTS & ACCESSORIES 1 The Features of HA-500 1 Belt for FINE BELT SANDER (Ring Type) EmaxEVO EmaxEVO Product ESPERT ROTUS Description Drive Motor & Control Unit 3.66" ø0.55" IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 2 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 iSpeed3 Sand Belt E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • • • • • Stroke speed : 25~5,000 strokes/min A wide variety of patterns can be produced by varying the spring pressure and hammer speed. Light weight, pencil type grip makes the handpiece very comfortable to hold and easy to use. Adjustable spring pressure. Self lubricating hammer mechanism ensure excellent durability. E4000 Engraving and Ornament Processing Work Hammer Attachment CAT. No. Model Price Standard Accessories • Wrench (7 x 5.1) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Oil and Oil offer machine • Hammer Bit (For replacement) : 2 pcs. RE18060 HA-500 20,000 min-1(rpm) Max. (*1) 16,000 min-1(rpm) Max. (*2) *Please use it with Speed Reducer. (ROTUS Air Motor) Hammer Bit to be machined to required shapes (SUS-420, heat treated, approx, HRC50) Product 3 MA W • Weight : 3.35 oz. • Stroke range : 0.4 mm • Stroke Spring Pressure : 4.4~7.1N (Ring Adjustment Type) CAT. No. Package RE65301 3 pcs./pack Price Sand Belt for Wood ø0.897" ø1.0" ø0.98" ø1.18" 8 The Features of FINE BELT SANDER KBS-101 Zirconia MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 7.28" 8 •Polishing a flat surface Diamond (Hard Type) Drive Motor & Control Unit HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX •Polishing a curved surface Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) Page 1-p33 ROTUS Air Line Kit (AL-H1207F) & AFC-45 8 Diamond (Soft Type) Page 5-p2 runs Approx. 0~2,700 ft/min • Belt mm, 6 mm and 4 mm width belts are available. • 8The angle of the belt section is fully adjustable. • Exchanging the belt is simply done by lever release. • Weight : 12.35 oz. • CAT. No. 64901 64902 64903 64904 64905 64906 64911 64912 64913 64914 64915 64916 64921 64922 64923 64924 64925 64926 64927 64928 64941 64942 64943 64971 64972 64973 65011 65012 65014 65015 65017 65021 65022 65023 65024 65028 65025 65026 65027 Grit # # # # # # # # # # # # # # # # # # # # # # # 80 120 180 240 320 400 80 120 180 240 320 400 80 120 180 240 320 400 600 800 80 120 240 # 80 # 100 Width (mm) Length (mm) Package ESPERT ROTUS IMPULSE 4 PRESTO II SHEENUS neo SONIC CUTTER 2 6 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" 300 30 pcs./pack E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 8 E4000 3 MA ø0.897" ø1.0" ø0.98" 8 300 30 pcs./pack 8 300 3 pcs./pack 8 300 3 pcs./pack 8 300 3 pcs./pack # 120 # 80 # 120 # 240 # 320 # 600 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 Price (Package) ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS 8 300 3 pcs./pack Xpeed 5 AIR LINE KIT 8 Felt 65101 8 300 5 pcs./pack 6 PARTS compact, minimal vibration and a small diameter grip •Light-weight, design keep the hand free from fatigue for long, continuous operation. polishing a curved surface, the tension between the front and •When central pulley can be utilized. When polishing a flat surface or a 7 TECHNICAL DATA groove, use the flat part of belt. 8 APPLICATION EXAMPLES FINE BELT SANDER Attachment CAT. No. Model KBS61065 KBS-101 Standard Accessories Price INDEX • 8 mm Belt (3 kinds 2 pcs. each) • 6 mm Belt (3 kinds 2 pcs. each) • 4 mm Belt (3 kinds 2 pcs. each) • Allen Wrench (3 mm) : 1 pc. 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) 1-p16 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p17 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:54 PM ページ 1-p16 “Emax EVOlution” & “ROTUS” ATTACHMENTS & ACCESSORIES 1 The Features of HA-500 1 Belt for FINE BELT SANDER (Ring Type) EmaxEVO EmaxEVO Product ESPERT ROTUS Description Drive Motor & Control Unit 3.66" ø0.55" IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 2 or Air Motor (IM-301) ROTUS Air Line Kit (AL-H1207F) & AFC-45 Page 1-p33 Page 5-p2 iSpeed3 Sand Belt E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • • • • • Stroke speed : 25~5,000 strokes/min A wide variety of patterns can be produced by varying the spring pressure and hammer speed. Light weight, pencil type grip makes the handpiece very comfortable to hold and easy to use. Adjustable spring pressure. Self lubricating hammer mechanism ensure excellent durability. E4000 Engraving and Ornament Processing Work Hammer Attachment CAT. No. Model Price Standard Accessories • Wrench (7 x 5.1) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Oil and Oil offer machine • Hammer Bit (For replacement) : 2 pcs. RE18060 HA-500 20,000 min-1(rpm) Max. (*1) 16,000 min-1(rpm) Max. (*2) *Please use it with Speed Reducer. (ROTUS Air Motor) Hammer Bit to be machined to required shapes (SUS-420, heat treated, approx, HRC50) Product 3 MA W • Weight : 3.35 oz. • Stroke range : 0.4 mm • Stroke Spring Pressure : 4.4~7.1N (Ring Adjustment Type) CAT. No. Package RE65301 3 pcs./pack Price Sand Belt for Wood ø0.897" ø1.0" ø0.98" ø1.18" 8 The Features of FINE BELT SANDER KBS-101 Zirconia MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 7.28" 8 •Polishing a flat surface Diamond (Hard Type) Drive Motor & Control Unit HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX •Polishing a curved surface Electric Motor (ENK-410S) (ENK-250T) Emax EVOlution Control Unit (NE249 120) Page 1-p7 Page 1-p4 or Air Motor (IM-301) Page 1-p33 ROTUS Air Line Kit (AL-H1207F) & AFC-45 8 Diamond (Soft Type) Page 5-p2 runs Approx. 0~2,700 ft/min • Belt mm, 6 mm and 4 mm width belts are available. • 8The angle of the belt section is fully adjustable. • Exchanging the belt is simply done by lever release. • Weight : 12.35 oz. • CAT. No. 64901 64902 64903 64904 64905 64906 64911 64912 64913 64914 64915 64916 64921 64922 64923 64924 64925 64926 64927 64928 64941 64942 64943 64971 64972 64973 65011 65012 65014 65015 65017 65021 65022 65023 65024 65028 65025 65026 65027 Grit # # # # # # # # # # # # # # # # # # # # # # # 80 120 180 240 320 400 80 120 180 240 320 400 80 120 180 240 320 400 600 800 80 120 240 # 80 # 100 Width (mm) Length (mm) Package ESPERT ROTUS IMPULSE 4 PRESTO II SHEENUS neo SONIC CUTTER 2 6 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" 300 30 pcs./pack E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 8 E4000 3 MA ø0.897" ø1.0" ø0.98" 8 300 30 pcs./pack 8 300 3 pcs./pack 8 300 3 pcs./pack 8 300 3 pcs./pack # 120 # 80 # 120 # 240 # 320 # 600 # 120 # 180 # 240 # 320 # 400 # 600 # 800 #1,000 Price (Package) ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS 8 300 3 pcs./pack Xpeed 5 AIR LINE KIT 8 Felt 65101 8 300 5 pcs./pack 6 PARTS compact, minimal vibration and a small diameter grip •Light-weight, design keep the hand free from fatigue for long, continuous operation. polishing a curved surface, the tension between the front and •When central pulley can be utilized. When polishing a flat surface or a 7 TECHNICAL DATA groove, use the flat part of belt. 8 APPLICATION EXAMPLES FINE BELT SANDER Attachment CAT. No. Model KBS61065 KBS-101 Standard Accessories Price INDEX • 8 mm Belt (3 kinds 2 pcs. each) • 6 mm Belt (3 kinds 2 pcs. each) • 4 mm Belt (3 kinds 2 pcs. each) • Allen Wrench (3 mm) : 1 pc. 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) 1-p16 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p17 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:54 PM ページ 1-p18 “Emax EVOlution” & “ROTUS” SPEED REDUCER & PARTS 1 CAT. No. RO10214 SPEED REDUCER RG-01 CAT. No. “Emax EVOlution” & “ROTUS” ACCESSORIES RO10228 SPEED REDUCER RG-02 1 Common Tools for LUSTER, MINI-LUSTER EmaxEVO EmaxEVO 1.65" TORQUE UP 4 TIMES (1/4 Speed Reducer) PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" •The speed is reduced to 1/4 but the torque is multiplied by 4 times. • Weight : 2.40 oz. 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Model TORQUE UP 15 TIMES (1/15 Speed Reducer) 0.79" E3000 - One Piece CAT. No. Model 0.98" Standard Accessories RG-01 RO10228 • Pin Wrench (K-233) : 1 pc. RG-02 LS10963 DLA-1-100 LS10918 DLA4 x 1-100 LS10922 DLA1 x 4-100 LS26712 Black # 600 *2 LS26707 Blue LS26708 White # 1,000 LS26709 Red LS26711 Black # 600 LS26704 Blue LS26705 White # 1,000 LS26706 Red LS26710 Black # 600 LS26701 Blue 0.04" LS26702 White # 1,000 Super Stone LS26703 Red *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 Grindstone Holder VEA for (W 0.53" x T 0.43") Sandpaper Disk ø0.13" Price L1 RO10214 S-008 S-012 S-018 S-024 S-032 S-040 S-060 S-080 S-100 S-150 K-008 K-012 K-018 K-024 K-032 K-040 K-060 K-080 K-100 K-150 ø0.43" • Weight : 3.28 oz. LS 10875 Grindstone Holder VES for (W 0.43" x T 0.18") 1.18" L2 ø0.12" • Pin Wrench (K-233) : 1 pc. ZO 94005 94006 94007 Holder for Super Stone SH-10 (L1=0.40") (L2=1.00") SH-6 (L1=0.24") (L2=0.92") SH-4 (L1=0.16") (L2=0.87") 0.71" *1 0.31" E3000 - Modular Sandpaper CAT. No. RE10210 EXTENSION JOINT CN-01 E4000 3 ø0.897" ø1.0" ø0.98" 1.97" • Weight : 2.93 oz. [4] (Speed 1 : 1) RE10210 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" -1 Model Standard Accessories Tool Holder with Spring FVA Price LS 10853 2.60" Angle Rod NGA [2] LS 10848 Super Stone 2.24" CAT. No. " 08 0. [1] 1" " 31 0. HPS 0.04" 0.7 LS 10891 LKE-2A with Hinge Use with FBA-2 [1] 5 0. 28 " 1" 0.7 LS 11326 Hinge (Diamond) DLC-7 x 18-100 AIR LINE KIT 0.33" ø0.39" Foot Pedal Fit to 8106 FC-64 Emax EVOlution Price 0.03" 7 TECHNICAL DATA •Used as an ON/OFF switch as well as a variable speed control. *2 LS 10886 Ball Joint LAA-3A Use with SEV LS 11327 Ball Joint (with Diamond) DLD-10/0.75 *2 *2 [1]~[4] : Please See Page 1-p14 for Illustration Usage. *1 : Other than noted, prices are per piece. *2 : Available while supply lasts. Check with NSK America. 8 APPLICATION EXAMPLES INDEX 1-p18 ø0.39" 2. 0.16" Xpeed Model 2 Super Stone 8106 FOOT PEDAL FC-64 CAT. No. 5 .9 0.24" Rod for Lapping FBA-2 # 800 2 0.04" " HTS PARTS 5 .9 " 95 # 1,200 # 800 # 1,200 # 800 # 1,200 ESPERT ROTUS IMPULSE 100 pcs. Package PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 100 pcs. Package E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 0.59" 0.39" • Pin Wrench (K-233) : 1 pc. 4 6 0.63" " [3] CN-01 LS 10867 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 # 1,000 # 1,500 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 # 1,000 # 1,500 0.59" 1.77" Extension Joint (Speed 1 : 1) CAT. No. MS HES810 ø0.12" 35,000 min (rpm) Max. (*1) 35,000 min (rpm) Max. (*2) -1 ø1.18" HES510 ZO 95008 Oil Stone Lapping Stick Holder for (W 0.24" x T 0.12") This is a joint to be connected between a motor and an attachment to •extend the total length of the attachment. ø0.74" MA ø0.12" 0.94" 0.16" 0.16" ø0.04" E3000 - 80,000rpm 0.28" 0.13" ø1.18" ø1.0"/ø0.98" ø0.897" Price Description · Model LS10900 LS10902 LS10904 LS10905 LS10906 LS10908 LS10910 LS10912 LS10914 LS10915 LS10917 LS10919 LS10921 LS10924 LS10923 LS10925 LS10927 LS10929 LS10931 LS10932 3.07" •The speed is reduced to 1/15 but the torque is multiplied by 15 times. E2530 / E2550 ø0.897" LS 10834 1.22" Speed Reducer (1/15) Price Standard Accessories CAT. No. Product Price Description · Model ø0.12" 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Speed Reducer (1/4) CAT. No. CAT. No. Product 0.05" IMPULSE 2.21" ø0.74" ROTUS ø0.74" ESPERT MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p19 1-p0-19_EmaxEVO_A_1407.qxd 14.8.3 3:54 PM ページ 1-p18 “Emax EVOlution” & “ROTUS” SPEED REDUCER & PARTS 1 CAT. No. RO10214 SPEED REDUCER RG-01 CAT. No. “Emax EVOlution” & “ROTUS” ACCESSORIES RO10228 SPEED REDUCER RG-02 1 Common Tools for LUSTER, MINI-LUSTER EmaxEVO EmaxEVO 1.65" TORQUE UP 4 TIMES (1/4 Speed Reducer) PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" •The speed is reduced to 1/4 but the torque is multiplied by 4 times. • Weight : 2.40 oz. 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Model TORQUE UP 15 TIMES (1/15 Speed Reducer) 0.79" E3000 - One Piece CAT. No. Model 0.98" Standard Accessories RG-01 RO10228 • Pin Wrench (K-233) : 1 pc. RG-02 LS10963 DLA-1-100 LS10918 DLA4 x 1-100 LS10922 DLA1 x 4-100 LS26712 Black # 600 *2 LS26707 Blue LS26708 White # 1,000 LS26709 Red LS26711 Black # 600 LS26704 Blue LS26705 White # 1,000 LS26706 Red LS26710 Black # 600 LS26701 Blue 0.04" LS26702 White # 1,000 Super Stone LS26703 Red *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 Grindstone Holder VEA for (W 0.53" x T 0.43") Sandpaper Disk ø0.13" Price L1 RO10214 S-008 S-012 S-018 S-024 S-032 S-040 S-060 S-080 S-100 S-150 K-008 K-012 K-018 K-024 K-032 K-040 K-060 K-080 K-100 K-150 ø0.43" • Weight : 3.28 oz. LS 10875 Grindstone Holder VES for (W 0.43" x T 0.18") 1.18" L2 ø0.12" • Pin Wrench (K-233) : 1 pc. ZO 94005 94006 94007 Holder for Super Stone SH-10 (L1=0.40") (L2=1.00") SH-6 (L1=0.24") (L2=0.92") SH-4 (L1=0.16") (L2=0.87") 0.71" *1 0.31" E3000 - Modular Sandpaper CAT. No. RE10210 EXTENSION JOINT CN-01 E4000 3 ø0.897" ø1.0" ø0.98" 1.97" • Weight : 2.93 oz. [4] (Speed 1 : 1) RE10210 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" -1 Model Standard Accessories Tool Holder with Spring FVA Price LS 10853 2.60" Angle Rod NGA [2] LS 10848 Super Stone 2.24" CAT. No. " 08 0. [1] 1" " 31 0. HPS 0.04" 0.7 LS 10891 LKE-2A with Hinge Use with FBA-2 [1] 5 0. 28 " 1" 0.7 LS 11326 Hinge (Diamond) DLC-7 x 18-100 AIR LINE KIT 0.33" ø0.39" Foot Pedal Fit to 8106 FC-64 Emax EVOlution Price 0.03" 7 TECHNICAL DATA •Used as an ON/OFF switch as well as a variable speed control. *2 LS 10886 Ball Joint LAA-3A Use with SEV LS 11327 Ball Joint (with Diamond) DLD-10/0.75 *2 *2 [1]~[4] : Please See Page 1-p14 for Illustration Usage. *1 : Other than noted, prices are per piece. *2 : Available while supply lasts. Check with NSK America. 8 APPLICATION EXAMPLES INDEX 1-p18 ø0.39" 2. 0.16" Xpeed Model 2 Super Stone 8106 FOOT PEDAL FC-64 CAT. No. 5 .9 0.24" Rod for Lapping FBA-2 # 800 2 0.04" " HTS PARTS 5 .9 " 95 # 1,200 # 800 # 1,200 # 800 # 1,200 ESPERT ROTUS IMPULSE 100 pcs. Package PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 100 pcs. Package E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 0.59" 0.39" • Pin Wrench (K-233) : 1 pc. 4 6 0.63" " [3] CN-01 LS 10867 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 # 1,000 # 1,500 # 80 # 120 # 180 # 240 # 320 # 400 # 600 # 800 # 1,000 # 1,500 0.59" 1.77" Extension Joint (Speed 1 : 1) CAT. No. MS HES810 ø0.12" 35,000 min (rpm) Max. (*1) 35,000 min (rpm) Max. (*2) -1 ø1.18" HES510 ZO 95008 Oil Stone Lapping Stick Holder for (W 0.24" x T 0.12") This is a joint to be connected between a motor and an attachment to •extend the total length of the attachment. ø0.74" MA ø0.12" 0.94" 0.16" 0.16" ø0.04" E3000 - 80,000rpm 0.28" 0.13" ø1.18" ø1.0"/ø0.98" ø0.897" Price Description · Model LS10900 LS10902 LS10904 LS10905 LS10906 LS10908 LS10910 LS10912 LS10914 LS10915 LS10917 LS10919 LS10921 LS10924 LS10923 LS10925 LS10927 LS10929 LS10931 LS10932 3.07" •The speed is reduced to 1/15 but the torque is multiplied by 15 times. E2530 / E2550 ø0.897" LS 10834 1.22" Speed Reducer (1/15) Price Standard Accessories CAT. No. Product Price Description · Model ø0.12" 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Speed Reducer (1/4) CAT. No. CAT. No. Product 0.05" IMPULSE 2.21" ø0.74" ROTUS ø0.74" ESPERT MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p19 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p20 ULTRA-PRECISION BRUSHLESS MICRO-GRINDER “ESPERT 500” • Evolutionary New Design High-Performance Brushless Micro Grinder. 1 EmaxEVO ESPERT Ultra-Precision Micro-Grinder New Advanced Design Control Unit 1 The Espert 500 brushless motor takes motor technology to an even higher level. The new state of the art motor has dramatically increased efficiency and torque output. The microprocessor based control unit provides optimal control of the motors and allows for increased flexibility in this multi-function system. EmaxEVO ESPERT ROTUS ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 IMPULSE Speed : 1,000~50,000 min-1 (rpm) Speed is steplessly variable from 1,000~50,000 min-1 (rpm). Smooth and powerful torque is delivered at both high and low speeds. The extremely high maximum speed of 50,000 min-1 (rpm) allows high precision micro-machining. Low Noise, Low Vibration The brushless motor and incorporated cooling fan have reduced the vibration and noise levels, resulting in a quieter, more comfortable work environment. Dramatically compared with conventional grinders. iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 2 Types of Motors Special Dust-Proof Mechanism Compliance with EMC and other Safety Standards Optimal Control via Microcomputer The operation of all Espert 500 functions is controlled by a high performance microcomputer (CPU) that is programmed with NAKANISHI's proprietary technology. NAKANISHI’s CPU has direct control of the brushless micro-grinder allowing smooth and highly precise cutting and polishing of a wide variety of materials. Bur "chatter" has been eliminated. The system automatically senses which micromotor is attached (ENK-500C or ENK-500T) and self adjusts to provide optimum micro-grinder performance. ø0.897" E3000 - One Piece E3000 - Modular ø1.18" Very high torque from compact motors. NAKANISHI Smart Switch Color • Compact Type (ENK-500C) • Torque Type (ENK-500T) 140W Blue 200W Gray ø1.0"/ø0.98" ø0.897" The handpiece has a patented built-in-dust protection system to prevent the infiltration of dust and debris into the front bearings. This NAKANISHI patented design assures long-term durability. E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" The electronic circuits are designed using NAKANISHI's proprietary technology to meet eco-friendly expectations by minimizing power consumption. Since power demands are minimal, no significant heat is generated and no cooling fan is required. 4 10 Types of Attachments Available All of the Espert 400 system attachments are available for use with this system. 9 different types of attachments and 1 speed reducer making an almost infinite number of applications possible. Excellent Durability HTS Wide Range of Collet Available Xpeed Collet sizes range from a tiny 0.3 mm up, with a wide variety of sizes available. Tools can be changed without the use of any wrenches. Micro Grinder & Handpiece Stand 5 AIR LINE KIT 6 7 TECHNICAL DATA E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 A/B 2 Motors Can Be Connected E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" High Quality Metallic Silver Body E3000 - 80,000rpm 3 • Self Check Function (Maintenance Mode) • Smooth Operation • Operation Check Sound • Highly Visible and easy to operate front panel • 2-Digit Digital Display • Error Code Display Function MA ø0.897" ø1.0" ø0.98" ø1.18" An exclusive new feature of the Espert 500 system, the FiXpeed® system allows the user to independently preset the speed of motor A and motor B. For example motor A can be set to maintain the speed set by the FiXpeed® system while motor B has variable control using a foot pedal. This function allows for unprecedented flexibility. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 High performance brushless motor eliminates the need to change carbon brushes. NAKANISHI's internal load test has proven continuous use for more than 5,000 hours. HPS PARTS iSpeed3 MS Memory Speed Function FiXpeed ® HES510 HES810 2 E3000 - One Piece Other Features The control unit is equipped with an auto cruise function that operates the micro-grinder at a preset speed without the need to use the foot pedal. This function eliminates foot fatigue during prolonged operation. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E4000 Auto Cruise Function The switch provides a click sensation and a confirmation tone is produced by the control unit when the switch is operated. The motor type is distinguishable by the switch color. MS PRESTO II ø0.897" *EMC (Electromagnetic Compatibility) Eco-Friendly Design NAKANISHI Smart Switch NAKANISHI Smart Switch NAKANISHI has given considerable thought to 'behind the scenes' performance. The Espert 500 system complies with the world's most rigorous EMC * standards. In electromagnetic terms, it has been designed to be very safe so as to curb the generation of electromagnetic interference (noise), which may cause failure or malfunctions in other equipment. The Espert 500 system will not be affected by external electromagnetic interference. The Espert 500 system also complies with the strict European safety standard EN61010-1. Operator safety is always NAKANISHI's highest priority. High Precision This specially designed micromotor stand allows easy pick-up and set-down of the micro-grinder. Strong, but soft to the touch, the micro-grinder stand contains convenient, integrated storage compartments for adjustment wrenches and a spare chuck. HES810 Simplified Hand and Foot Pedal Control HTS You no longer need to push a switch on the control unit to switch between hand and foot pedal control. If you want to operate the motor handpiece by hand simply push the NAKANISHI Smart Switch, if you want to use foot pedal control simply depress the foot pedal. HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 NAKANISHI's ultra-precision technology ensures bur concentricity of 0.02 mm (0.0008") or less, which allows for very high precision finishing. TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX Simple Screw on Attachments ESPERT 500 Control Unit CAT. No. Model ES9087 NE96 1-p20 Specifications Price INDEX • Power Source : AC120V, 50-60Hz • Dimensions : W6.77" x D9.06" x H3.70" • Weight : 5 lb. 11.71 oz. • Accessories : Handpiece Stand : 1 pc. Handpiece Holder : 1 pc. * Order by catalog number. 1-p21 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p20 ULTRA-PRECISION BRUSHLESS MICRO-GRINDER “ESPERT 500” • Evolutionary New Design High-Performance Brushless Micro Grinder. 1 EmaxEVO ESPERT Ultra-Precision Micro-Grinder New Advanced Design Control Unit 1 The Espert 500 brushless motor takes motor technology to an even higher level. The new state of the art motor has dramatically increased efficiency and torque output. The microprocessor based control unit provides optimal control of the motors and allows for increased flexibility in this multi-function system. EmaxEVO ESPERT ROTUS ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 IMPULSE Speed : 1,000~50,000 min-1 (rpm) Speed is steplessly variable from 1,000~50,000 min-1 (rpm). Smooth and powerful torque is delivered at both high and low speeds. The extremely high maximum speed of 50,000 min-1 (rpm) allows high precision micro-machining. Low Noise, Low Vibration The brushless motor and incorporated cooling fan have reduced the vibration and noise levels, resulting in a quieter, more comfortable work environment. Dramatically compared with conventional grinders. iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 2 Types of Motors Special Dust-Proof Mechanism Compliance with EMC and other Safety Standards Optimal Control via Microcomputer The operation of all Espert 500 functions is controlled by a high performance microcomputer (CPU) that is programmed with NAKANISHI's proprietary technology. NAKANISHI’s CPU has direct control of the brushless micro-grinder allowing smooth and highly precise cutting and polishing of a wide variety of materials. Bur "chatter" has been eliminated. The system automatically senses which micromotor is attached (ENK-500C or ENK-500T) and self adjusts to provide optimum micro-grinder performance. ø0.897" E3000 - One Piece E3000 - Modular ø1.18" Very high torque from compact motors. NAKANISHI Smart Switch Color • Compact Type (ENK-500C) • Torque Type (ENK-500T) 140W 200W Blue Gray ø1.0"/ø0.98" ø0.897" The handpiece has a patented built-in-dust protection system to prevent the infiltration of dust and debris into the front bearings. This NAKANISHI patented design assures long-term durability. E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" The electronic circuits are designed using NAKANISHI's proprietary technology to meet eco-friendly expectations by minimizing power consumption. Since power demands are minimal, no significant heat is generated and no cooling fan is required. 4 10 Types of Attachments Available All of the Espert 400 system attachments are available for use with this system. 9 different types of attachments and 1 speed reducer making an almost infinite number of applications possible. Excellent Durability HTS Wide Range of Collet Available Xpeed Collet sizes range from a tiny 0.3 mm up, with a wide variety of sizes available. Tools can be changed without the use of any wrenches. Micro Grinder & Handpiece Stand 5 AIR LINE KIT 6 7 TECHNICAL DATA E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 A/B 2 Motors Can Be Connected E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" High Quality Metallic Silver Body E3000 - 80,000rpm 3 • Self Check Function (Maintenance Mode) • Smooth Operation • Operation Check Sound • Highly Visible and easy to operate front panel • 2-Digit Digital Display • Error Code Display Function MA ø0.897" ø1.0" ø0.98" ø1.18" An exclusive new feature of the Espert 500 system, the FiXpeed® system allows the user to independently preset the speed of motor A and motor B. For example motor A can be set to maintain the speed set by the FiXpeed® system while motor B has variable control using a foot pedal. This function allows for unprecedented flexibility. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 High performance brushless motor eliminates the need to change carbon brushes. NAKANISHI's internal load test has proven continuous use for more than 5,000 hours. HPS PARTS iSpeed3 MS Memory Speed Function FiXpeed ® HES510 HES810 2 E3000 - One Piece Other Features The control unit is equipped with an auto cruise function that operates the micro-grinder at a preset speed without the need to use the foot pedal. This function eliminates foot fatigue during prolonged operation. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E4000 Auto Cruise Function The switch provides a click sensation and a confirmation tone is produced by the control unit when the switch is operated. The motor type is distinguishable by the switch color. MS PRESTO II ø0.897" *EMC (Electromagnetic Compatibility) Eco-Friendly Design NAKANISHI Smart Switch NAKANISHI Smart Switch NAKANISHI has given considerable thought to 'behind the scenes' performance. The Espert 500 system complies with the world's most rigorous EMC * standards. In electromagnetic terms, it has been designed to be very safe so as to curb the generation of electromagnetic interference (noise), which may cause failure or malfunctions in other equipment. The Espert 500 system will not be affected by external electromagnetic interference. The Espert 500 system also complies with the strict European safety standard EN61010-1. Operator safety is always NAKANISHI's highest priority. High Precision This specially designed micromotor stand allows easy pick-up and set-down of the micro-grinder. Strong, but soft to the touch, the micro-grinder stand contains convenient, integrated storage compartments for adjustment wrenches and a spare chuck. HES810 Simplified Hand and Foot Pedal Control HTS You no longer need to push a switch on the control unit to switch between hand and foot pedal control. If you want to operate the motor handpiece by hand simply push the NAKANISHI Smart Switch, if you want to use foot pedal control simply depress the foot pedal. HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 NAKANISHI's ultra-precision technology ensures bur concentricity of 0.02 mm (0.0008") or less, which allows for very high precision finishing. TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX Simple Screw on Attachments ESPERT 500 Control Unit CAT. No. Model ES9087 NE96 1-p20 Specifications Price INDEX • Power Source : AC120V, 50-60Hz • Dimensions : W6.77" x D9.06" x H3.70" • Weight : 5 lb. 11.71 oz. • Accessories : Handpiece Stand : 1 pc. Handpiece Holder : 1 pc. * Order by catalog number. 1-p21 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p22 “ESPERT 500” STANDARD SET 1 EmaxEVO “ESPERT 500” SYSTEM CHART 1 Espert 500 Standard Set (Ring Type) • High Power System. Max. Output 140W • Speed Range : 1,000~50,000 min-1(rpm) • Microprocessor controlled for optimal motor control • Hand Switch [NAKANISHI Smart Switch] • Memory Speed Function [FiXpeed® ] ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER System Chart CAT. No. Model Price Attachment iSpeed3 ES9085 Model ES50C-HR 50,000 min (rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) -1 Price Attachment Motor Unit EHR-500 ENK-500C NE96 ø1.0"/ø0.98" Control Unit (NE96) : 1 pc. Compact Motor Handpiece (ENK50C-HR) : 1 pc. Collet ø1/8" (CHH-3.175), Standard ø2.35 mm (CHH-2.35) : 1 pc. each Accessories Handpiece Holder : 1 pc. Handpiece Stand : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" ø0.897" ES41553 ERG-01B 90˚ Angle Torque Type ES41551 ERA-270 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) May be connected between the motor and the spindle as required for increased torque. 2.34" ø1.0" ø0.98" CAT. No. ES9091 Model ENK50C-HR Motor Lever Type ES11515 EHL-401 ø1.18" ø1.0"/ø0.98" ø0.897" 1,000~50,000 min-1(rpm) Attachment Motor EHR-500 ENK-500C Torque Type ES41552 EHG-400 40,000 min (rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Collet ø1/8" (CHH-3.175), LUSTER (Reciprocating motion) ES11516 ELS-100 ES9088 ENK-500C 4 ES81525 • Highest Power in its Class. Max. Output 200W • Speed Range : 1,000~50,000 min-1(rpm) • Microprocessor controlled for optimal motor control • Hand Switch [NAKANISHI Smart Switch] • Memory Speed Function [FiXpeed®] HES510 HES810 HTS HPS 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) ø0.897" • Torque Motor and Cord ø1.0" ø0.98" 1,000~50,000 min-1(rpm) ø1.18" 5 CAT. No. AIR LINE KIT 6 ES9086 Model ES50T-HR Price Motor Unit EHR-500 ENK-500T NE96 Control Unit (NE96) : 1 pc. Compact Motor Handpiece (ENK50T-HR) : 1 pc. Collet ø1/8" (CHH-3.175), Standard ø2.35 mm (CHH-2.35) : 1 pc. each Accessories Handpiece Holder : 1 pc. Handpiece Stand : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. PARTS 7 TECHNICAL DATA Espert 500 Torque Motor Handpiece CAT. No. ø1.11" ø13.3 mm (ø0.52") NAKANISHI Smart Switch (Gray) 2.34" 4.78" 7.12" ES9092 Model ENK50T-HR EML-8 Motor EHR-500 ENK-500T 4 HTS HPS FINE BELT SANDER KBS61557 EBS-101 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Xpeed • Use ECN-011 or ERG-01 for ELECTER Emax EVOlution, ROTUS attachments 5 • Espert 500 ES9087 NE96 AIR LINE KIT 6 PARTS 7 Extension Adaptor ES11518 ECN-011 Speed Reducer (1/4) ES11517 ERG-01 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Price Attachment Control Unit HES810 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Attachment ES51554 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MINI-LUSTER (Reciprocating motion) 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 3 HES510 45˚ Angle Type ES81526 EKC-300 Xpeed 1-p22 90˚ Angle Type EIC-300 E4000 MA 30,000 min (rpm) Max. ( 1) * 30,000 min-1(rpm) Max. (*2) -1 Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. Espert 500 Torque Set (Ring Type) Speed Range 1,000~50,000 min-1(rpm) 200W Max. Output Weight 8.82 oz. excluding cord ø1.0"/ø0.98" E3000 - Modular 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) Price Standard ø2.35 mm (CHH-2.35) : 1 pc. each Accessories Wrench (7 x 5.1) : 1 pc. 4.24" 6.58" INDEX E2530 / E2550 ø0.897" MS APPLICATION EXAMPLES iSpeed3 E3000 - One Piece ES9089 ENK-500T 8 2 E2530 / E2550 -1 ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E3000 - 80,000rpm ø1.06" Speed Range 1,000~50,000 min-1(rpm) Max. Output 140W Weight 7.41 oz. excluding cord 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) • Compact Motor and Cord NAKANISHI Smart Switch (Blue) 3 MA • 1/4 Speed Reducer Espert 500 Compact Motor Handpiece ø13.3 mm (ø0.52") E4000 IMPULSE PRESTO II E2530 / E2550 E3000 - 80,000rpm Speed Reducer Ring Type CAT. No. ESPERT ROTUS ES9090 EHR-500 2 EmaxEVO TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Standard Accessories Wrench (7 x 5.1) : 1 pc. Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p23 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p22 “ESPERT 500” STANDARD SET 1 EmaxEVO “ESPERT 500” SYSTEM CHART 1 Espert 500 Standard Set (Ring Type) • High Power System. Max. Output 140W • Speed Range : 1,000~50,000 min-1(rpm) • Microprocessor controlled for optimal motor control • Hand Switch [NAKANISHI Smart Switch] • Memory Speed Function [FiXpeed® ] ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER System Chart CAT. No. Model Price Attachment iSpeed3 ES9085 Model ES50C-HR 50,000 min (rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) -1 Price Attachment Motor Unit EHR-500 ENK-500C NE96 ø1.0"/ø0.98" Control Unit (NE96) : 1 pc. Compact Motor Handpiece (ENK50C-HR) : 1 pc. Collet ø1/8" (CHH-3.175), Standard ø2.35 mm (CHH-2.35) : 1 pc. each Accessories Handpiece Holder : 1 pc. Handpiece Stand : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" ø0.897" ES41553 ERG-01B 90˚ Angle Torque Type ES41551 ERA-270 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) May be connected between the motor and the spindle as required for increased torque. 2.34" ø1.0" ø0.98" CAT. No. ES9091 Model ENK50C-HR Motor Lever Type ES11515 EHL-401 ø1.18" ø1.0"/ø0.98" ø0.897" 1,000~50,000 min-1(rpm) Attachment Motor EHR-500 ENK-500C Torque Type ES41552 EHG-400 40,000 min (rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Collet ø1/8" (CHH-3.175), LUSTER (Reciprocating motion) ES11516 ELS-100 ES9088 ENK-500C 4 ES81525 • Highest Power in its Class. Max. Output 200W • Speed Range : 1,000~50,000 min-1(rpm) • Microprocessor controlled for optimal motor control • Hand Switch [NAKANISHI Smart Switch] • Memory Speed Function [FiXpeed®] HES510 HES810 HTS HPS 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) ø0.897" • Torque Motor and Cord ø1.0" ø0.98" 1,000~50,000 min-1(rpm) ø1.18" 5 CAT. No. AIR LINE KIT 6 ES9086 Model ES50T-HR Price Motor Unit EHR-500 ENK-500T NE96 Control Unit (NE96) : 1 pc. Compact Motor Handpiece (ENK50T-HR) : 1 pc. Collet ø1/8" (CHH-3.175), Standard ø2.35 mm (CHH-2.35) : 1 pc. each Accessories Handpiece Holder : 1 pc. Handpiece Stand : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. PARTS 7 TECHNICAL DATA Espert 500 Torque Motor Handpiece CAT. No. ø1.11" ø13.3 mm (ø0.52") NAKANISHI Smart Switch (Gray) 2.34" 4.78" 7.12" ES9092 Model ENK50T-HR EML-8 Motor EHR-500 ENK-500T 4 HTS HPS FINE BELT SANDER KBS61557 EBS-101 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Xpeed • Use ECN-011 or ERG-01 for ELECTER Emax EVOlution, ROTUS attachments 5 • Espert 500 ES9087 NE96 AIR LINE KIT 6 PARTS 7 Extension Adaptor ES11518 ECN-011 Speed Reducer (1/4) ES11517 ERG-01 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Price Attachment Control Unit HES810 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Attachment ES51554 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MINI-LUSTER (Reciprocating motion) 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 3 HES510 45˚ Angle Type ES81526 EKC-300 Xpeed 1-p22 90˚ Angle Type EIC-300 E4000 MA 30,000 min (rpm) Max. ( 1) * 30,000 min-1(rpm) Max. (*2) -1 Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. Espert 500 Torque Set (Ring Type) Speed Range 1,000~50,000 min-1(rpm) 200W Max. Output Weight 8.82 oz. excluding cord ø1.0"/ø0.98" E3000 - Modular 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) Price Standard ø2.35 mm (CHH-2.35) : 1 pc. each Accessories Wrench (7 x 5.1) : 1 pc. 4.24" 6.58" INDEX E2530 / E2550 ø0.897" MS APPLICATION EXAMPLES iSpeed3 E3000 - One Piece ES9089 ENK-500T 8 2 E2530 / E2550 -1 ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E3000 - 80,000rpm ø1.06" Speed Range 1,000~50,000 min-1(rpm) Max. Output 140W Weight 7.41 oz. excluding cord 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) • Compact Motor and Cord NAKANISHI Smart Switch (Blue) 3 MA • 1/4 Speed Reducer Espert 500 Compact Motor Handpiece ø13.3 mm (ø0.52") E4000 IMPULSE PRESTO II E2530 / E2550 E3000 - 80,000rpm Speed Reducer Ring Type CAT. No. ESPERT ROTUS ES9090 EHR-500 2 EmaxEVO TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Standard Accessories Wrench (7 x 5.1) : 1 pc. Pin Wrench : 1 pc. L-Wrench (9) : 1 pc. Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p23 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p24 “ESPERT 500” MOTORS & ATTACHMENTS CAT. No. ES9088 COMPACT TYPE MOTOR ENK-500C 1 CAT. No. 1,000~50,000 min ES41552 TORQUE TYPE ATTACHMENT EHG-400 4.24" ø24.5 mm (ø0.96") IMPULSE 2 • Collet Standard Size : ø1/4" (CHG-6.35) : 1 pc. Optional Collets : CHG-[][] are shown in page (6-p2) • Weight : 3.88 oz. 40,000 min (rpm) Max. (*1) 30,000 min *Please use it with Speed Reducer. -1 • Weight : 4.06 oz. excluding cord PRESTO II SHEENUS neo SONIC CUTTER ø0.88" lightweight, high-speed brushless DC motor. •Small, Incorporates •operation. the NAKANISHI Smart Switch for easy on/off •Very low vibration noise and maintenance. ESPERT ROTUS type attachment used with ø1/4" chuck diameter as •Torque standard and nicely fits in hand-grip. 2.95" (rpm) -1 EmaxEVO -1 ESPERT ROTUS IMPULSE (rpm) Max. (*2) PRESTO II Torque Type Attachment Compact Type Motor CAT. No. Model ES9088 ENK-500C Price Specifications • Output Power : 140W • Maximum Torque : 6.0 cN · m • Cord Length : 4.5 ft CAT. No. Model ES41552 EHG-400 Price Standard Accessories • Collet ø1/4" (CHG-6.35) : 1 pc. • Wrench (10 x 10) : 1 pc. • Bar Wrench (K-212) : 1 pc. ø1.0"/ø0.98" E2530 / E2550 iSpeed3 CAT. No. ES9089 TORQUE TYPE MOTOR ENK-500T CAT. No. E3000 - One Piece 1,000~50,000 min 3 MA ø0.897" ø1.0" ø0.98" 0.80" ø28.4 mm (ø1.12") E4000 pad paper disk, corner work, and grinding the inside of a pipes. high-torque, high-speed brushless DC motor. •High-power, Incorporates the NAKANISHI Smart Switch for easy on/off •operation. •Very low vibration noise and maintenance. ø1.18" E3000 - 80,000rpm ø0.50" (rpm) ø0.88" 4.78" • Weight : 5.64 oz. excluding cord ES9089 • Speed Reduction Ratio : 3/4 • Collet Standard Size : ø1/8" (CHC-3.175) : 1 pc. Optional Collets : CHC-[][] are shown in page (6-p2) • Standard Accessories : Rubber Pad, Paper Disk • Weight : 1.90 oz. * Refer to 1-p10~p11 about the detail of Accessories. 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Model Specifications ENK-500T Price • Output Power : 200W • Maximum Torque : 8.7 cN · m • Cord Length : 4.5 ft CAT. No. Model ES81525 Price Standard Accessories • Collet ø1/8" (CHC-3.175) : 1 pc. • Chuck Wrench (K-231) : 1 pc. • Wrench (20 x 24) : 1 pc. • Standard Accessories : 1 set EIC-300 ø13.3 mm (ø0.52") HES510 with micron level precision for high accuracy and •Manufactured high reliability. lightweight design allows for fine finishing of delicate parts. •Slim, •Ring Type one touch bur release. HTS • Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Optional Collets : CHH-[][] are shown in page (6-p2) • Weight : 3.32 oz. HPS 50,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) HES810 5 Ring Type Attachment CAT. No. Model Standard Accessories ES9090 EHR-500 •45˚Angle Attachment is suitable for working in corners, cavities, etc. 2.71" ø0 " .5 0" • Reverse rotation against the motor • Speed Reduction Ratio : 3/4 • Collet Standard Size : ø1/8" (CHC-3.175) : 1 pc. Optional Collets : CHC-[][] are shown in page (6-p2) • Standard Accessories : Rubber Pad, Paper Disk • Weight : 1.90 oz. CAT. No. Model ES81526 EKC-300 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HES810 HTS -1 HPS 45º Angle Attachment Price Price Standard Accessories Xpeed 5 • Collet ø1/8" (CHC-3.175) : 1 pc. • Chuck Wrench (K-231) : 1 pc. • Wrench (20 x 24) : 1 pc. • Standard Accessories : 1 set ø0.88" ø13.3 mm (ø0.52") Lever Type Attachment CAT. No. Model ES11515 EHL-401 • • • Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Optional Collets : CHH-[][] are shown in page (6-p2) • Weight : 2.47 oz. Standard Accessories • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. type is suitable for the work of corner and the grinding •90˚Angle of the inside of pipe. 2.78" ø0.69" to pen-grip type holding. Simple lever turning for bur exchange. Same chuck as used in EHR-500. 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) 6 ES41551 90°ANGLE TORQUE ATTACHMENT ERA-270 To attain more powerful grinding and fine polishing finish, •attachment EHL-401 is designed to make it lightweight and fit 2.32" INDEX CAT. No. ø0.88" ES11515 LEVER TYPE ATTACHMENT EHL-401 1.12" CAT. No. 7 1-p24 MA AIR LINE KIT TECHNICAL DATA 8 E4000 4 40,000 min (rpm) Max. (*1) 20,000 min (rpm) Max. (*2) -1 * Refer to 1-p10~p11 about the detail of Accessories. • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. • Pin Wrench : 1 pc. • L Wrench (9) : 1 pc. PARTS APPLICATION EXAMPLES E3000 - 80,000rpm MS AIR LINE KIT 6 ø1.0"/ø0.98" ø0.897" ø1.0" ø0.98" ES81526 45°ANGLE ATTACHMENT EKC-300 79 2.34" CAT. No. ø0.88" ES9090 RING TYPE ATTACHMENT EHR-500 0. CAT. No. 4 Xpeed ø1.18" ø1.18" ø0.88" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" E3000 - Modular ø0.897" ø1.18" MS ø0.897" E3000 - One Piece 3 90º Angle Attachment Torque Type Motor CAT. No. ø1.0"/ø0.98" E2530 / E2550 Attachment with ø1/8" Collet is conveniently small •90˚Angle and equally suitable for polishing flat surfaces with rubber 2.53" -1 E3000 - Modular E2530 / E2550 ES81525 90°ANGLE ATTACHMENT EIC-300 ø0.897" ø1.0"/ø0.98" ø0.897" SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 1 EmaxEVO • Speed Reduction Ratio : 1/1.5 • Collet Standard Size : ø1/8" (CHS-3.175) : 1 pc. Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 3.77 oz. 7 TECHNICAL DATA 8 APPLICATION EXAMPLES 40,000 min (rpm) Max. (*1) 20,000 min (rpm) Max. (*2) -1 PARTS -1 INDEX * Refer to 1-p10~p11 about the detail of Accessories. 90º Angle Torque Attachment Price CAT. No. Model ES41551 ERA-270 Standard Accessories Price • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (8 x 5), (7 x 5.1), (20 x 24) : 1 pc. each Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p25 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p24 “ESPERT 500” MOTORS & ATTACHMENTS CAT. No. ES9088 COMPACT TYPE MOTOR ENK-500C 1 CAT. No. 1,000~50,000 min ES41552 TORQUE TYPE ATTACHMENT EHG-400 4.24" ø24.5 mm (ø0.96") IMPULSE 2 • Collet Standard Size : ø1/4" (CHG-6.35) : 1 pc. Optional Collets : CHG-[][] are shown in page (6-p2) • Weight : 3.88 oz. 40,000 min (rpm) Max. (*1) 30,000 min *Please use it with Speed Reducer. -1 • Weight : 4.06 oz. excluding cord PRESTO II SHEENUS neo SONIC CUTTER ø0.88" lightweight, high-speed brushless DC motor. •Small, Incorporates •operation. the NAKANISHI Smart Switch for easy on/off •Very low vibration noise and maintenance. ESPERT ROTUS type attachment used with ø1/4" chuck diameter as •Torque standard and nicely fits in hand-grip. 2.95" (rpm) -1 EmaxEVO -1 ESPERT ROTUS IMPULSE (rpm) Max. (*2) PRESTO II Torque Type Attachment Compact Type Motor CAT. No. Model ES9088 ENK-500C Price Specifications • Output Power : 140W • Maximum Torque : 6.0 cN · m • Cord Length : 4.5 ft CAT. No. Model ES41552 EHG-400 Price Standard Accessories • Collet ø1/4" (CHG-6.35) : 1 pc. • Wrench (10 x 10) : 1 pc. • Bar Wrench (K-212) : 1 pc. ø1.0"/ø0.98" E2530 / E2550 iSpeed3 CAT. No. ES9089 TORQUE TYPE MOTOR ENK-500T CAT. No. E3000 - One Piece 1,000~50,000 min 3 MA ø0.897" ø1.0" ø0.98" 0.80" ø28.4 mm (ø1.12") E4000 pad paper disk, corner work, and grinding the inside of a pipes. high-torque, high-speed brushless DC motor. •High-power, Incorporates the NAKANISHI Smart Switch for easy on/off •operation. •Very low vibration noise and maintenance. ø1.18" E3000 - 80,000rpm ø0.50" (rpm) ø0.88" 4.78" • Weight : 5.64 oz. excluding cord ES9089 • Speed Reduction Ratio : 3/4 • Collet Standard Size : ø1/8" (CHC-3.175) : 1 pc. Optional Collets : CHC-[][] are shown in page (6-p2) • Standard Accessories : Rubber Pad, Paper Disk • Weight : 1.90 oz. * Refer to 1-p10~p11 about the detail of Accessories. 40,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Model Specifications ENK-500T Price • Output Power : 200W • Maximum Torque : 8.7 cN · m • Cord Length : 4.5 ft CAT. No. Model ES81525 Price Standard Accessories • Collet ø1/8" (CHC-3.175) : 1 pc. • Chuck Wrench (K-231) : 1 pc. • Wrench (20 x 24) : 1 pc. • Standard Accessories : 1 set EIC-300 ø13.3 mm (ø0.52") HES510 with micron level precision for high accuracy and •Manufactured high reliability. lightweight design allows for fine finishing of delicate parts. •Slim, •Ring Type one touch bur release. HTS • Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Optional Collets : CHH-[][] are shown in page (6-p2) • Weight : 3.32 oz. HPS 50,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) HES810 5 Ring Type Attachment CAT. No. Model Standard Accessories ES9090 EHR-500 •45˚Angle Attachment is suitable for working in corners, cavities, etc. 2.71" ø0 " .5 0" • Reverse rotation against the motor • Speed Reduction Ratio : 3/4 • Collet Standard Size : ø1/8" (CHC-3.175) : 1 pc. Optional Collets : CHC-[][] are shown in page (6-p2) • Standard Accessories : Rubber Pad, Paper Disk • Weight : 1.90 oz. CAT. No. Model ES81526 EKC-300 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HES810 HTS -1 HPS 45º Angle Attachment Price Price Standard Accessories Xpeed 5 • Collet ø1/8" (CHC-3.175) : 1 pc. • Chuck Wrench (K-231) : 1 pc. • Wrench (20 x 24) : 1 pc. • Standard Accessories : 1 set ø0.88" ø13.3 mm (ø0.52") Lever Type Attachment CAT. No. Model ES11515 EHL-401 • • • Collet Standard Size : ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Optional Collets : CHH-[][] are shown in page (6-p2) • Weight : 2.47 oz. Standard Accessories • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. type is suitable for the work of corner and the grinding •90˚Angle of the inside of pipe. 2.78" ø0.69" to pen-grip type holding. Simple lever turning for bur exchange. Same chuck as used in EHR-500. 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) 6 ES41551 90°ANGLE TORQUE ATTACHMENT ERA-270 To attain more powerful grinding and fine polishing finish, •attachment EHL-401 is designed to make it lightweight and fit 2.32" INDEX CAT. No. ø0.88" ES11515 LEVER TYPE ATTACHMENT EHL-401 1.12" CAT. No. 7 1-p24 MA AIR LINE KIT TECHNICAL DATA 8 E4000 4 40,000 min (rpm) Max. (*1) 20,000 min (rpm) Max. (*2) -1 * Refer to 1-p10~p11 about the detail of Accessories. • Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each • Wrench (7 x 5.1) : 1 pc. • Pin Wrench : 1 pc. • L Wrench (9) : 1 pc. PARTS APPLICATION EXAMPLES E3000 - 80,000rpm MS AIR LINE KIT 6 ø1.0"/ø0.98" ø0.897" ø1.0" ø0.98" ES81526 45°ANGLE ATTACHMENT EKC-300 79 2.34" CAT. No. ø0.88" ES9090 RING TYPE ATTACHMENT EHR-500 0. CAT. No. 4 Xpeed ø1.18" ø1.18" ø0.88" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" E3000 - Modular ø0.897" ø1.18" MS ø0.897" E3000 - One Piece 3 90º Angle Attachment Torque Type Motor CAT. No. ø1.0"/ø0.98" E2530 / E2550 Attachment with ø1/8" Collet is conveniently small •90˚Angle and equally suitable for polishing flat surfaces with rubber 2.53" -1 E3000 - Modular E2530 / E2550 ES81525 90°ANGLE ATTACHMENT EIC-300 ø0.897" ø1.0"/ø0.98" ø0.897" SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 1 EmaxEVO • Speed Reduction Ratio : 1/1.5 • Collet Standard Size : ø1/8" (CHS-3.175) : 1 pc. Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 3.77 oz. 7 TECHNICAL DATA 8 APPLICATION EXAMPLES 40,000 min (rpm) Max. (*1) 20,000 min (rpm) Max. (*2) -1 PARTS -1 INDEX * Refer to 1-p10~p11 about the detail of Accessories. 90º Angle Torque Attachment Price CAT. No. Model ES41551 ERA-270 Standard Accessories Price • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (8 x 5), (7 x 5.1), (20 x 24) : 1 pc. each Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p25 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p26 CAT. No. ES11516 Reciprocating Motion Polishing Finisher LUSTER ATTACHMENT ELS-100 1 Stroke (variable) : 0~7,600 times/min (Max.) •Reciprocating for final finishing such as lapping and honing after •Perfect grinding. Streamlines conventional hand-finishing of metal molds. type compact special polisher for ESPERT motor. •Reciprocating •Stroke is adjustable from 0~6 mm. 4.45" EmaxEVO 1.77" ESPERT PRESTO II CAT. No. ES41553 SPEED REDUCER (1/4) ERG-01B 1/4 Speed Reducer ERG-01B •provides 4 times greater torque by 1.57" CAT. No. ES11517 SPEED REDUCER (1/4) ERG-01 The Speed Reducer can be used with •the attachments for Emax EVOlution 1.61" mounting it in between the motor and the attachment. and ROTUS you already have. the speed 1/4 and •Reduces multiplies the torque by 4 times. • Weight : 2.29 oz. • Max. tool shank diameter ø0.25", Screw clamp type. • Weight : 1 lb. 7.99 oz. 4.69" ROTUS IMPULSE “ESPERT 500” SPEED REDUCER & PARTS ø0.88" “ESPERT 500” ATTACHMENTS 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) SHEENUS neo SONIC CUTTER Speed Reducer (1/4) Reciprocating Motion Polishing Finisher LUSTER Attachment 2 iSpeed3 CAT. No. Model ES11516 ELS-100 Standard Accessories CAT. No. Speed Reduction Ratio Price ES41553 ERG-01B • Speed Reduction Ratio 1/4 IMPULSE PRESTO II CAT. No. Model Speed Reduction Ratio ES11517 ERG-01 • Speed Reduction Ratio 1/4 Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 CAT. No. ø0.897" E3000 - Modular CAT. No. ES51554 Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER ATTACHMENT EML-8 ø0.13" ø0.31" E3000 - One Piece ø1.18" E4000 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 CAT. No. Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment CAT. No. Model Stroke Range ES51554 EML-8 0.8 mm Standard Accessories Price Speed Ratio ES11518 ECN-011 E4000 Price MA ø0.897" • Speed Ratio 1 : 1 ø1.0" ø0.98" ø1.18" • Standard Accessories : 1 set MS ESPERT 500 Spare Parts CAT. No. Product KBS61557 FINE BELT SANDER ATTACHMENT EBS-101 7.28" Description Foot Pedal •The angle of belt section is steplessly adjustable. HTS HPS 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Xpeed * Refer to 1-p17 about the detail of Belt. Espert 500 Compact Motor Cord KBS61557 Model EG11404 FC-40 8104 ES9093 Standard Accessories EBS-101 • 8 mm Belt (3 different kinds) : 2 pcs. each • 6 mm Belt (3 different kinds) : 2 pcs. each • 4 mm Belt (3 different kinds) : 2 pcs. each • Allen Wrench (3 mm) : 1 pc. • Variable Speed Control Foot Pedal Price 4 K-274 HES810 ENKCD-50C • Compact Motor Cord • 4.5 ft Long HPS Xpeed Espert 500 Compact Motor Cord Model Specifications HTS FINE BELT SANDER Attachment CAT. No. CAT. No. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Espert 500 Handpiece Stand PARTS E3000 - 80,000rpm 3 Model • Width of Belt : 8 mm, 6 mm, 4 mm. • Belt Speed : 0~2,820 ft/min (Max.) • Weight : 12.52 oz. 6 ø1.0"/ø0.98" ø0.897" • Weight : 1.09 oz. Extension Adaptor HES810 AIR LINE KIT ø1.18" and ROTUS you already have. 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) HES510 5 E3000 - Modular 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) MA ø1.0" ø0.98" ø0.897" E3000 - One Piece The Adaptor can be used with the •attachments for Emax EVOlution 1.14" • Max. tool shank diameter ø0.13", Screw clamp type. • Weight : 4.59 oz. 3 ø0.897" E2530 / E2550 ES11518 EXTENSION ADAPTOR ECN-011 Stroke (variable) : 0~10,000 times/min (Max.) •Reciprocating •Stroke Range : 0.8 mm 3.33" ø0.59" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm SHEENUS neo SONIC CUTTER 2 ø0.79" E2530 / E2550 ROTUS 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Price • Standard Accessories • Lubrication Oil • Lubrication Nozzle for LUSTER ESPERT • Weight : 2.19 oz. Speed Reducer (1/4) Model 1 EmaxEVO Price 9095 ENKCD-50C 3M • Compact Motor Cord • 9.84 ft Long 5 AIR LINE KIT Espert 500 Torque Motor Cord ES9094 ENKCD-50T • Torque Motor Cord • 4.5 ft Long Espert 500 Torque Motor Cord 9096 ENKCD-50T 3M • Torque Motor Cord • 9.84 ft Long 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p26 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p27 1-p20-27_ESPERT_A_1407.qxd 14.8.3 3:58 PM ページ 1-p26 CAT. No. ES11516 Reciprocating Motion Polishing Finisher LUSTER ATTACHMENT ELS-100 1 Stroke (variable) : 0~7,600 times/min (Max.) •Reciprocating for final finishing such as lapping and honing after •Perfect grinding. Streamlines conventional hand-finishing of metal molds. type compact special polisher for ESPERT motor. •Reciprocating •Stroke is adjustable from 0~6 mm. 4.45" EmaxEVO 1.77" ESPERT PRESTO II CAT. No. ES41553 SPEED REDUCER (1/4) ERG-01B 1/4 Speed Reducer ERG-01B •provides 4 times greater torque by 1.57" CAT. No. ES11517 SPEED REDUCER (1/4) ERG-01 The Speed Reducer can be used with •the attachments for Emax EVOlution 1.61" mounting it in between the motor and the attachment. and ROTUS you already have. the speed 1/4 and •Reduces multiplies the torque by 4 times. • Weight : 2.29 oz. • Max. tool shank diameter ø0.25", Screw clamp type. • Weight : 1 lb. 7.99 oz. 4.69" ROTUS IMPULSE “ESPERT 500” SPEED REDUCER & PARTS ø0.88" “ESPERT 500” ATTACHMENTS 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) SHEENUS neo SONIC CUTTER Speed Reducer (1/4) Reciprocating Motion Polishing Finisher LUSTER Attachment 2 iSpeed3 CAT. No. Model ES11516 ELS-100 Standard Accessories CAT. No. Speed Reduction Ratio Price ES41553 ERG-01B • Speed Reduction Ratio 1/4 IMPULSE PRESTO II CAT. No. Model Speed Reduction Ratio ES11517 ERG-01 • Speed Reduction Ratio 1/4 Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 CAT. No. ø0.897" E3000 - Modular CAT. No. ES51554 Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER ATTACHMENT EML-8 ø0.13" ø0.31" E3000 - One Piece ø1.18" E4000 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 CAT. No. Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment CAT. No. Model Stroke Range ES51554 EML-8 0.8 mm Standard Accessories Price Speed Ratio ES11518 ECN-011 E4000 Price MA ø0.897" • Speed Ratio 1 : 1 ø1.0" ø0.98" ø1.18" • Standard Accessories : 1 set MS ESPERT 500 Spare Parts CAT. No. Product KBS61557 FINE BELT SANDER ATTACHMENT EBS-101 7.28" Description Foot Pedal •The angle of belt section is steplessly adjustable. HTS HPS 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Xpeed * Refer to 1-p17 about the detail of Belt. Espert 500 Compact Motor Cord KBS61557 Model EG11404 FC-40 8104 ES9093 Standard Accessories EBS-101 • 8 mm Belt (3 different kinds) : 2 pcs. each • 6 mm Belt (3 different kinds) : 2 pcs. each • 4 mm Belt (3 different kinds) : 2 pcs. each • Allen Wrench (3 mm) : 1 pc. • Variable Speed Control Foot Pedal Price 4 K-274 HES810 ENKCD-50C • Compact Motor Cord • 4.5 ft Long HPS Xpeed Espert 500 Compact Motor Cord Model Specifications HTS FINE BELT SANDER Attachment CAT. No. CAT. No. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Espert 500 Handpiece Stand PARTS E3000 - 80,000rpm 3 Model • Width of Belt : 8 mm, 6 mm, 4 mm. • Belt Speed : 0~2,820 ft/min (Max.) • Weight : 12.52 oz. 6 ø1.0"/ø0.98" ø0.897" • Weight : 1.09 oz. Extension Adaptor HES810 AIR LINE KIT ø1.18" and ROTUS you already have. 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) HES510 5 E3000 - Modular 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) MA ø1.0" ø0.98" ø0.897" E3000 - One Piece The Adaptor can be used with the •attachments for Emax EVOlution 1.14" • Max. tool shank diameter ø0.13", Screw clamp type. • Weight : 4.59 oz. 3 ø0.897" E2530 / E2550 ES11518 EXTENSION ADAPTOR ECN-011 Stroke (variable) : 0~10,000 times/min (Max.) •Reciprocating •Stroke Range : 0.8 mm 3.33" ø0.59" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm SHEENUS neo SONIC CUTTER 2 ø0.79" E2530 / E2550 ROTUS 40,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Price • Standard Accessories • Lubrication Oil • Lubrication Nozzle for LUSTER ESPERT • Weight : 2.19 oz. Speed Reducer (1/4) Model 1 EmaxEVO Price 9095 ENKCD-50C 3M • Compact Motor Cord • 9.84 ft Long 5 AIR LINE KIT Espert 500 Torque Motor Cord ES9094 ENKCD-50T • Torque Motor Cord • 4.5 ft Long Espert 500 Torque Motor Cord 9096 ENKCD-50T 3M • Torque Motor Cord • 9.84 ft Long 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p26 Allowable Speed, continuous use may change depending *Maximum on the material being cut and other application variables. Allowable Speed, intermittent use. *12 :: Maximum * Maximum Allowable Speed, continuous use. * Order by catalog number. 1-p27 1-p28-33_ROTUS_A_1407.qxd 14.8.3 4:00 PM ページ 1-p28 Micro-Grinder Air Driven 1 1 EmaxEVO EmaxEVO ESPERT ROTUS ROTUS IMPULSE PRESTO II 30,000 min-1(rpm) ULTRA-PRECISION HIGH TORQUE AIR GRINDER • High torque air motor assembled with special vane mechanism. • Two types of air motors can be selected depending on • SHEENUS neo SONIC CUTTER PRESTO II SHEENUS neo SONIC CUTTER E2530 / E2550 ø1.0"/ø0.98" E3000 - One Piece IMPULSE E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" 60,000 min (rpm) -1 E3000 - 80,000rpm ULTRA-PRECISION HIGH-TORQUE AIR GRINDER • Durable and quiet high-efficient air grinder. • The IMPULSE Series also offers 45 degree and 90 degree models. Choose the type that best fits your application requirements. • Lubricating oil is required. E4000 PRESTO ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 ULTRA-PRECISION HIGH SPEED AIR TURBINE GRINDER • ø1.18" MS ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 3 3 ø1.0" ø0.98" ø1.0"/ø0.98" E2530 / E2550 E4000 MA ø0.897" 2 iSpeed3 E2530 / E2550 ø0.897" IMPULSE 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected. iSpeed3 E2530 / E2550 ROTUS the application. • Lubricating oil is required. 2 ESPERT 320,000 min-1(rpm) Most suitable for delicate processing works due to no lube air turbine handpiece. MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p28 1-p29 1-p28-33_ROTUS_A_1407.qxd 14.8.3 4:00 PM ページ 1-p28 Micro-Grinder Air Driven 1 1 EmaxEVO EmaxEVO ESPERT ROTUS ROTUS IMPULSE PRESTO II 30,000 min-1(rpm) ULTRA-PRECISION HIGH TORQUE AIR GRINDER • High torque air motor assembled with special vane mechanism. • Two types of air motors can be selected depending on • SHEENUS neo SONIC CUTTER PRESTO II SHEENUS neo SONIC CUTTER E2530 / E2550 ø1.0"/ø0.98" E3000 - One Piece IMPULSE E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" 60,000 min (rpm) -1 E3000 - 80,000rpm ULTRA-PRECISION HIGH-TORQUE AIR GRINDER • Durable and quiet high-efficient air grinder. • The IMPULSE Series also offers 45 degree and 90 degree models. Choose the type that best fits your application requirements. • Lubricating oil is required. E4000 PRESTO ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 ULTRA-PRECISION HIGH SPEED AIR TURBINE GRINDER • ø1.18" MS ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 3 3 ø1.0" ø0.98" ø1.0"/ø0.98" E2530 / E2550 E4000 MA ø0.897" 2 iSpeed3 E2530 / E2550 ø0.897" IMPULSE 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected. iSpeed3 E2530 / E2550 ROTUS the application. • Lubricating oil is required. 2 ESPERT 320,000 min-1(rpm) Most suitable for delicate processing works due to no lube air turbine handpiece. MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 1-p28 1-p29 1-p28-33_ROTUS_A_1407.qxd 14.8.3 4:00 PM ページ 1-p30 ULTRA-PRECISION HIGH TORQUE AIR GRINDER 1 “ROTUS” ROTUS System Chart Ultra-Precision High-Torque Air Grinder 1 min (rpm) • 30,000 High torque assembled with special vane mechanism. • Two types ofairairmotor motors can be selected depending on the application. • 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected. • -1 EmaxEVO CAT. No. Price Model Attachment @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ ESPERT @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ROTUS IMPULSE PRESTO II @@ @@ @@ @@ @@ @@ @@ @@ RE11008 IR-310 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) Page 1-p8 Ring Type @@ @@ @@ @@ @@ @@ @@ @@ Speed Reducer · Extension Joint @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Extension Joint RE10210 CN-01 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 2811 Page 1-p8 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Lever Type IG-400 Straight Type ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1/4 Speed Reducer RO10214 RG-01 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 4 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1/15 Speed Reducer RO10228 RG-02 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min-1(rpm) Max. (*1) Page 1-p18 30,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HTS E3000 - 80,000rpm @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ E4000 be connected * May between the motor MFC-300S Page 1-p9 3 MA 90° Mini Angle Type ø0.897" RE10252 MFC-300M Page 1-p9 90° Mini Angle Type (Very Small Head) • Air Motor with Chip Air Mechanism 3,000~30,000 min-1(rpm) 5 Assembled with ON/OFF, speed control and FWD./REV. control ring switch. Page 1-p33 90° Angle Type KC-300 45° Angle Type Capable of infinite applications with 14 different handpieces and 3 types of intermediate attachments. * Interchangeable with attachments form the Emax EVOlution series. • Air Motor with 360˚ Twist-Free Joint 3,000~30,000 min (rpm) -1 RO10163 IM-301 LS-100 Page 1-p33 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Page 1-p12 AIR LINE KIT 6 Special Dust Protection Mechanism (patented) LS51307 INDEX HTS HPS Xpeed 7 MINI-LUSTER (Reciprocating motion) TECHNICAL DATA LS11380 • Air Line kit SLS-16 35,000 min-1(rpm) Max. (*1) 24,000 min-1(rpm) Max. (*2) Page 1-p13 RE18060 4507 SWING-LUSTER (Right to Left motion) 8 AL-H1207F * This air line kit is designed for use with the AFC-45 foot control, CAT. No.AF10045. 6.33" 20,000 min (rpm) Max. (*1) 16,000 min (rpm) Max. (*2) Page 1-p16 -1 Hammer Action Type • Foot Control KBS61065 KBS-101 AF10045 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) Page 1-p16 FINE BELT SANDER *Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. *1 : Maximum Allowable Speed, intermittent use. *2 : Maximum Allowable Speed, continuous use. AFC-45 Page 6-p9 APPLICATION EXAMPLES Specifications Page 5-p2 HA-500 -1 1-p30 HES810 6 ML-8 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Page 1-p13 ø0.51" APPLICATION EXAMPLES 4 HES510 PARTS TECHNICAL DATA 8 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" AIR LINE KIT PARTS 7 MS 5 The chuck section of ROTUS has a special built-in dust protection mechanism that prevents entry of foreign matter such as chips and provides superior durability. LUSTER (Reciprocating motion) ø1.0" ø0.98" ø1.18" Various sizes ranging from ultra-small diameter (0.3 mm) are available for each attachment. Furthermore, collet replacement can be easily performed without wrench. 17 Types of Attachments for All Types of Applications 35,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Page 1-p10 LS10815 Ring Switch RO10163A IM-300 IC-300 35,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Page 1-p10 HPS Xpeed ø1.0"/ø0.98" ø0.897" @@ @@ @@ @@ @@ @@ @@ @@ Wide-range of Collet Sizes RE10266 ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ HES510 HES810 E3000 - Modular and the attachment as required for increased torque. 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) RE10182 ø0.897" E3000 - One Piece The air motor is utilizes a special vane design which keeps constant speed even under load providing stable grinding and polishing operation. @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ E2530 / E2550 A Special Rotary Vane Air Motor is Incorporated @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.0" ø0.98" MS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.897" ø1.18" ø1.0"/ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 2 iSpeed3 E2530 / E2550 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10247 To prevent twisting of the hose, 360˚ Twist- Free Joint connects the motor and the hose. @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min (rpm) Max. (*1) Page 1-p18 30,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ Long Type Type (IR-310) • Ring Ring operated open/close chuck @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ Twist Free Hose @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ One Touch Tool Changing SHEENUS neo SONIC CUTTER @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) Page 1-p9 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ BMH-300 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10235 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Torque Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HG-200 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10188 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 27,000 min-1(rpm) Max. (*1) 27,000 min-1(rpm) Max. (*2) Page 1-p9 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ PRESTO II @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ IMPULSE @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ROTUS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Page 1-p8 ø0.897" E3000 - Modular @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) E2530 / E2550 E3000 - One Piece @@ @@ @@ @@ @@ @@ @@ @@ ESPERT @@ @@ @@ @@ @@ @@ @@ @@ 35,000 min-1(rpm) Max. (*1) Page 1-p18 35,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ IH-300 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10178 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ SHEENUS neo SONIC CUTTER @@ @@ @@ @@ @@ @@ @@ @@ EmaxEVO Attachment IR-310 + Air motor IM-301 Speed : Max. 30,000 min-1(rpm) (56PSI) Proper Air Pressure : 42~63PSI Air Consumption : 2.65CFM Output Power : 46W (motor) Max. Torque : 6.6 cN · m (56PSI) Motor : Air motor IM-301 Dimensions : Air motor (IM-301) + Attachment (IR-310) See left figures Weight : Air motor (IM-301) + Attachment (IR-310) : 6.63 oz. INDEX * Order by catalog number. 1-p31 1-p28-33_ROTUS_A_1407.qxd 14.8.3 4:00 PM ページ 1-p30 ULTRA-PRECISION HIGH TORQUE AIR GRINDER 1 “ROTUS” ROTUS System Chart Ultra-Precision High-Torque Air Grinder 1 min (rpm) • 30,000 High torque assembled with special vane mechanism. • Two types ofairairmotor motors can be selected depending on the application. • 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected. • -1 EmaxEVO CAT. No. Price Model Attachment @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ ESPERT @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ROTUS IMPULSE PRESTO II @@ @@ @@ @@ @@ @@ @@ @@ RE11008 IR-310 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) Page 1-p8 Ring Type @@ @@ @@ @@ @@ @@ @@ @@ Speed Reducer · Extension Joint @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Extension Joint RE10210 CN-01 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 2811 Page 1-p8 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Lever Type IG-400 Straight Type ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1/4 Speed Reducer RO10214 RG-01 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 4 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1/15 Speed Reducer RO10228 RG-02 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min-1(rpm) Max. (*1) Page 1-p18 30,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HTS E3000 - 80,000rpm @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ E4000 be connected * May between the motor MFC-300S Page 1-p9 3 MA 90° Mini Angle Type ø0.897" RE10252 MFC-300M Page 1-p9 90° Mini Angle Type (Very Small Head) • Air Motor with Chip Air Mechanism 3,000~30,000 min-1(rpm) 5 Assembled with ON/OFF, speed control and FWD./REV. control ring switch. Page 1-p33 90° Angle Type KC-300 45° Angle Type Capable of infinite applications with 14 different handpieces and 3 types of intermediate attachments. * Interchangeable with attachments form the Emax EVOlution series. • Air Motor with 360˚ Twist-Free Joint 3,000~30,000 min (rpm) -1 RO10163 IM-301 LS-100 Page 1-p33 30,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Page 1-p12 AIR LINE KIT 6 Special Dust Protection Mechanism (patented) LS51307 INDEX HTS HPS Xpeed 7 MINI-LUSTER (Reciprocating motion) TECHNICAL DATA LS11380 • Air Line kit SLS-16 35,000 min-1(rpm) Max. (*1) 24,000 min-1(rpm) Max. (*2) Page 1-p13 RE18060 4507 SWING-LUSTER (Right to Left motion) 8 AL-H1207F * This air line kit is designed for use with the AFC-45 foot control, CAT. No.AF10045. 6.33" 20,000 min (rpm) Max. (*1) 16,000 min (rpm) Max. (*2) Page 1-p16 -1 Hammer Action Type • Foot Control KBS61065 KBS-101 AF10045 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) Page 1-p16 FINE BELT SANDER *Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. *1 : Maximum Allowable Speed, intermittent use. *2 : Maximum Allowable Speed, continuous use. AFC-45 Page 6-p9 APPLICATION EXAMPLES Specifications Page 5-p2 HA-500 -1 1-p30 HES810 6 ML-8 35,000 min-1(rpm) Max. (*1) 30,000 min-1(rpm) Max. (*2) Page 1-p13 ø0.51" APPLICATION EXAMPLES 4 HES510 PARTS TECHNICAL DATA 8 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" AIR LINE KIT PARTS 7 MS 5 The chuck section of ROTUS has a special built-in dust protection mechanism that prevents entry of foreign matter such as chips and provides superior durability. LUSTER (Reciprocating motion) ø1.0" ø0.98" ø1.18" Various sizes ranging from ultra-small diameter (0.3 mm) are available for each attachment. Furthermore, collet replacement can be easily performed without wrench. 17 Types of Attachments for All Types of Applications 35,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Page 1-p10 LS10815 Ring Switch RO10163A IM-300 IC-300 35,000 min-1(rpm) Max. (*1) 20,000 min-1(rpm) Max. (*2) Page 1-p10 HPS Xpeed ø1.0"/ø0.98" ø0.897" @@ @@ @@ @@ @@ @@ @@ @@ Wide-range of Collet Sizes RE10266 ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ HES510 HES810 E3000 - Modular and the attachment as required for increased torque. 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) RE10182 ø0.897" E3000 - One Piece The air motor is utilizes a special vane design which keeps constant speed even under load providing stable grinding and polishing operation. @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ E2530 / E2550 A Special Rotary Vane Air Motor is Incorporated @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 15,000 min-1(rpm) Max. (*1) 15,000 min-1(rpm) Max. (*2) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.0" ø0.98" MS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø0.897" ø1.18" ø1.0"/ø0.98" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 2 iSpeed3 E2530 / E2550 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10247 To prevent twisting of the hose, 360˚ Twist- Free Joint connects the motor and the hose. @@ @@ @@ @@ @@ @@ @@ @@ 30,000 min (rpm) Max. (*1) Page 1-p18 30,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ Long Type Type (IR-310) • Ring Ring operated open/close chuck @@ @@ @@ @@ @@ @@ @@ @@ -1 @@ @@ @@ @@ @@ @@ @@ @@ Twist Free Hose @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ One Touch Tool Changing SHEENUS neo SONIC CUTTER @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 35,000 min-1(rpm) Max. (*1) 35,000 min-1(rpm) Max. (*2) Page 1-p9 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ BMH-300 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10235 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ø1.18" @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Torque Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ HG-200 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10188 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 27,000 min-1(rpm) Max. (*1) 27,000 min-1(rpm) Max. (*2) Page 1-p9 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ PRESTO II @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ IMPULSE @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ROTUS @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Page 1-p8 ø0.897" E3000 - Modular @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) E2530 / E2550 E3000 - One Piece @@ @@ @@ @@ @@ @@ @@ @@ ESPERT @@ @@ @@ @@ @@ @@ @@ @@ 35,000 min-1(rpm) Max. (*1) Page 1-p18 35,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ 40,000 min-1(rpm) Max. (*1) 40,000 min-1(rpm) Max. (*2) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ IH-300 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ RE10178 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ SHEENUS neo SONIC CUTTER @@ @@ @@ @@ @@ @@ @@ @@ EmaxEVO Attachment IR-310 + Air motor IM-301 Speed : Max. 30,000 min-1(rpm) (56PSI) Proper Air Pressure : 42~63PSI Air Consumption : 2.65CFM Output Power : 46W (motor) Max. Torque : 6.6 cN · m (56PSI) Motor : Air motor IM-301 Dimensions : Air motor (IM-301) + Attachment (IR-310) See left figures Weight : Air motor (IM-301) + Attachment (IR-310) : 6.63 oz. INDEX * Order by catalog number. 1-p31 1-p28-33_ROTUS_A_1407.qxd 14.8.3 4:00 PM ページ 1-p32 “ROTUS” STANDARD SET 1148 ROTUS STANDARD SET (Ring Type) ESPERT The ROTUS System is a hand-held grinder with an energy saving air motor. Since it is an air driven system, there is virtually no heat generation resulting in excellent durability. Select from a variety of attachments depending on the application. ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 30,000 min 2 iSpeed3 (rpm) -1 EmaxEVO ESPERT Air motor designed for high-efficiency ROTUS IM-301 Performance Curve To achieve high torque, ROTUS air motor is assembled with micron precision between the vanes and the internal surface of cylinder using NAKANISHI's proprietary techniques. This high performance air motor with minimal power loss from load fluctuation has excellent performance in its grinding stability. Moreover, the motor with minimal air consumption runs quietly and the energy-saving mechanism makes it possible to operate with a 1 hp (0.75KW) air compressor. The motor prevents heat generation and expansion of metal by air cooling system and provides stable rotation speed. attachment for ROTUS standard set R301-IR. ø1.0"/ø0.98" E2530 / E2550 Light-weight and compact design ø0.897" CAT.No. E3000 - One Piece E3000 - Modular ø1.18" 1148 Model R301-IR Price Attachment Motor IR-310 IM-301 Air Grinder (IM-301+IR-310) : 1 pc. Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Air Line Kit (AL-H1207F) : 1 pc. Standard Foot Control (AFC-45) : 1 pc. Equipment Hose for Piping (K-275) 6 ft : 1 pc. Lubricating Oil (K-211) : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 2 pcs. L Shaped Wrench : 1 pc. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA The motor with attachment IR-310 is only 8.74 oz. Its light-weight and well balanced design provides excellent grinding performance. ROTUS Air Pressure 71PSI Speed-Torque Characteristics (IM-301) 12 IMPULSE Speed-Output Characteristics (IM-301) Speed-Torque Characteristics (IM-301+RG-01) 11 Speed-Output Characteristics (IM-301+RG-01) 10 9 Air Cooling System generates no heat for a continuous operation * The new ring type IR-310 is the standard E2530 / E2550 1 Motor for ROTUS (Pneumatically Driven) Output Power (W) CAT. No. 8 Torque (cN·m) 1 EmaxEVO “ROTUS” MOTOR 7 Speed control by Foot Control ø1.18" 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" 60 5 50 E3000 - One Piece 4 40 E3000 - Modular 3 30 ø1.18" 2 20 1 10 E2530 / E2550 ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 0 5 10 15 20 25 3 30 Speed { x 103 min-1(rpm) } Fine adjustment of variable speed can be controlled by Foot Control. MA ø0.897" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER 6 Assembled with Speed Control and Forward/Reverse Control Ring Forward/Reverse Rotating Direction Control Ring located at the end of the motor can control the motor speed as well. PRESTO II ø0.897" IR-310 Excellent quietness with Silencer ø1.0" ø0.98" By attaching the silencer to the end of the exhaust air tubing, the motor is operated extremely quiet. ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. RO10163 AIR MOTOR IM-301 (with Twist-Free Joint Mechanism) 4 Air Motor with 360˚ Twist-Free Joint Mechanism 3.81" HES810 HTS HPS • Adopted Twist-Free Joint mechanism between the motor and the hose has solved the problem of hose twisting. ø0.897" HES510 HTS HPS CAT. No. FWD/REV Rotating Direction Switch Ring 3,000~30,000 min (rpm) -1 RO10163 Model Standard Accessories IM-301 • Hose (K-206) : 6 ft • Silencer (K-209) • Pin Wrench (K-233) : 1 pc. Price AIR LINE KIT CAT. No. 6 RO10163A AIR MOTOR IM-300 (with Chip Air Mechanism) PARTS PARTS TECHNICAL DATA through the top end of the attachment. The handheld cutting work remains cool by the chip air allowing comfort through out the working process. (This is only with the attachment IH-300) APPLICATION EXAMPLES FWD/REV Rotating Direction Switch Ring INDEX 3,000~30,000 min (rpm) -1 8 APPLICATION EXAMPLES • Weight : 4.59 oz. excluding hose INDEX CAT. No. Model RO10163A IM-300 1-p32 7 motor IM-300 with Chip Air mechanism •Air blows away the cutting dust with clean air coming ø0.897" 8 Air Motor with Chip Air Mechanism 3.84" 7 TECHNICAL DATA Xpeed 5 AIR LINE KIT 6 HES810 • Weight : 4.59 oz. excluding hose Xpeed 5 4 HES510 Standard Accessories Price • Hose (K-207) : 6 ft • Silencer (K-209) • Pin Wrench (K-233) : 1 pc. * Order by catalog number. 1-p33 1-p28-33_ROTUS_A_1407.qxd 14.8.3 4:00 PM ページ 1-p32 “ROTUS” STANDARD SET 1148 ROTUS STANDARD SET (Ring Type) ESPERT The ROTUS System is a hand-held grinder with an energy saving air motor. Since it is an air driven system, there is virtually no heat generation resulting in excellent durability. Select from a variety of attachments depending on the application. ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 30,000 min 2 iSpeed3 (rpm) -1 EmaxEVO ESPERT Air motor designed for high-efficiency ROTUS IM-301 Performance Curve To achieve high torque, ROTUS air motor is assembled with micron precision between the vanes and the internal surface of cylinder using NAKANISHI's proprietary techniques. This high performance air motor with minimal power loss from load fluctuation has excellent performance in its grinding stability. Moreover, the motor with minimal air consumption runs quietly and the energy-saving mechanism makes it possible to operate with a 1 hp (0.75KW) air compressor. The motor prevents heat generation and expansion of metal by air cooling system and provides stable rotation speed. attachment for ROTUS standard set R301-IR. ø1.0"/ø0.98" E2530 / E2550 Light-weight and compact design ø0.897" CAT.No. E3000 - One Piece E3000 - Modular ø1.18" 1148 Model R301-IR Price Attachment Motor IR-310 IM-301 Air Grinder (IM-301+IR-310) : 1 pc. Collet ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35) : 1 pc. each Air Line Kit (AL-H1207F) : 1 pc. Standard Foot Control (AFC-45) : 1 pc. Equipment Hose for Piping (K-275) 6 ft : 1 pc. Lubricating Oil (K-211) : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 2 pcs. L Shaped Wrench : 1 pc. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA The motor with attachment IR-310 is only 8.74 oz. Its light-weight and well balanced design provides excellent grinding performance. ROTUS Air Pressure 71PSI Speed-Torque Characteristics (IM-301) 12 IMPULSE Speed-Output Characteristics (IM-301) Speed-Torque Characteristics (IM-301+RG-01) 11 Speed-Output Characteristics (IM-301+RG-01) 10 9 Air Cooling System generates no heat for a continuous operation * The new ring type IR-310 is the standard E2530 / E2550 1 Motor for ROTUS (Pneumatically Driven) Output Power (W) CAT. No. 8 Torque (cN·m) 1 EmaxEVO “ROTUS” MOTOR 7 Speed control by Foot Control ø1.18" 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" 60 5 50 E3000 - One Piece 4 40 E3000 - Modular 3 30 ø1.18" 2 20 1 10 E2530 / E2550 ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 0 5 10 15 20 25 3 30 Speed { x 103 min-1(rpm) } Fine adjustment of variable speed can be controlled by Foot Control. MA ø0.897" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER 6 Assembled with Speed Control and Forward/Reverse Control Ring Forward/Reverse Rotating Direction Control Ring located at the end of the motor can control the motor speed as well. PRESTO II ø0.897" IR-310 Excellent quietness with Silencer ø1.0" ø0.98" By attaching the silencer to the end of the exhaust air tubing, the motor is operated extremely quiet. ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. RO10163 AIR MOTOR IM-301 (with Twist-Free Joint Mechanism) 4 Air Motor with 360˚ Twist-Free Joint Mechanism 3.81" HES810 HTS HPS • Adopted Twist-Free Joint mechanism between the motor and the hose has solved the problem of hose twisting. ø0.897" HES510 HTS HPS CAT. No. FWD/REV Rotating Direction Switch Ring 3,000~30,000 min (rpm) -1 RO10163 Model Standard Accessories IM-301 • Hose (K-206) : 6 ft • Silencer (K-209) • Pin Wrench (K-233) : 1 pc. Price AIR LINE KIT CAT. No. 6 RO10163A AIR MOTOR IM-300 (with Chip Air Mechanism) PARTS PARTS TECHNICAL DATA through the top end of the attachment. The handheld cutting work remains cool by the chip air allowing comfort through out the working process. (This is only with the attachment IH-300) APPLICATION EXAMPLES FWD/REV Rotating Direction Switch Ring INDEX 3,000~30,000 min (rpm) -1 8 APPLICATION EXAMPLES • Weight : 4.59 oz. excluding hose INDEX CAT. No. Model RO10163A IM-300 1-p32 7 motor IM-300 with Chip Air mechanism •Air blows away the cutting dust with clean air coming ø0.897" 8 Air Motor with Chip Air Mechanism 3.84" 7 TECHNICAL DATA Xpeed 5 AIR LINE KIT 6 HES810 • Weight : 4.59 oz. excluding hose Xpeed 5 4 HES510 Standard Accessories Price • Hose (K-207) : 6 ft • Silencer (K-209) • Pin Wrench (K-233) : 1 pc. * Order by catalog number. 1-p33 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:02 PM ページ 1-p34 HIGH TORQUE PENCIL TYPE AIR GRINDER “IMPULSE” min (rpm) • Durable and quiet high-efficient air grinder. • 60,000 The IMPULSE Series also offers 45 degree and 90 degree models. Choose the type that best fits your • application requirements. -1 1 EmaxEVO CAT. No. NK60100 IMPULSE NSP-601 1 60,000 min-1(rpm) CAT. No. NK45400 IMPULSE NA45-400 40,000 min-1(rpm) ESPERT ESPERT The air motor is assembled with a special vane design which keeps constant speed even under load providing stable grinding and polishing operation. ø0.94" ø0.67" PRESTO II 2 The shape of the grinder is designed for sensitive finger •touch control toward the top of the cutting tool. start is guaranteed. •Smooth The safety design of clamping the chuck up to 1.14" •maintains stable rotation of the cutting tool. ø0.94" 6.61" • Angled model housings are all aluminum alloy. 6.34" 6" IMPULSE 1.5 ROTUS SHEENUS neo SONIC CUTTER EmaxEVO ROTUS • Collet Standard Size : ø1/8" (CHS-3.175) Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 7.41 oz. IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 ø1.13" iSpeed3 iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" CAT. No. NK60100 NSP-601 Price Standard Accessories Model • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. CAT. No. NK45400 Price Standard Accessories Model NA45-400 E2530 / E2550 ø0.897" E3000 - One Piece • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" shape of the grinder is specially designed for sensitive finger •The touch control toward the top of the cutting tool. The front part of the NSP-601 model is made of stainless steel ; the back portion of aluminum alloy. The exhaust air line hose with silencer keeps the noise level to a minimum. To prevent twisting of the double line hose, a 360 degree twist-free joint connects the motor and the hose. Silencer •Excellent Silencer on the exhaust air hose keeps the grinder very quiet. NK45230 IMPULSE NA45-230 •Set-Up Drawing • Air Line Kit AL-H1206 • To Intake Air Hose CAT. No. HPS Xpeed ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 NK45230 • Compressor Price Standard Accessories Model HES810 From Twisting Hose •Free To prevent the twisting of hose, 360˚ Twist-Free Joint connects 3 ø0.897" ø1.32" HES510 E4000 MA • Collet Standard Size : ø1/8" (CHS-3.175) Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 6.70 oz. • Intake Air Coupling 4 HTS • • IMPULSE • Silencer Filter 23,000 min-1(rpm) Angled model housings are all aluminum alloy. 6.42" ø0.94" 3 CAT. No. 6" E4000 E3000 - 80,000rpm Features 1.5 E3000 - 80,000rpm NA45-230 • Air Supply 3 Pieces Set HES510 HES810 • Collet ø1/8" (CHS-3.175) : 1 pc. • Special Grindstone Arbor (NCH-01) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 2 pcs. • Allen Wrench (1.5 mm) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. • Cup Wheel (NK06104, NK45800) : 1 pc. each • Rubber Pad (NK11033) : 1 pc. • Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each HTS HPS the motor and the hose. Xpeed • Use Air Line Kit AL-H1206 or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator) 5 •Connecting Part To Air Line Kit AIR LINE KIT CAT. No. NK90230 IMPULSE NA90-230 6 8 APPLICATION EXAMPLES INDEX 1-p34 & Dismounting Cutting Tool •Mounting Insert the wrench provided into the hole on the spindle and open or close the chuck with the Chuck Wrench to exchange the cutting tool. •Exchangeable Collet • Standard Size : ø1/8" (CHS-3.175) • Optional Collets : CHS-[][] are shown in page (6-p4) Air Filter ø0.94" 7 1.34" PARTS TECHNICAL DATA •Angled model housings are all aluminum alloy. 6.14" Screw for PT 1/4 Pipe 23,000 min-1(rpm) 6 • Collet Standard Size : ø1/8" (CHS-3.175) Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 6.70 oz. PARTS 7 TECHNICAL DATA 8 Specifications Rotating Speed Air Consumption Proper Air Pressure Hose Length Weight Output Intake Air Hose Length Eraser Hose Length 5 AIR LINE KIT : 60,000 min-1(rpm) : 5.83CFM : 56~85PSI : 4.5 ft : 5.82 oz. : 70W : 4.5 ft : 3.9 ft ø1.32" APPLICATION EXAMPLES INDEX CAT. No. NK90230 Model NA90-230 Price Standard Accessories • Collet ø1/8" (CHS-3.175) : 1 pc. • Special Grindstone Arbor (NCH-01) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 2 pcs. • Allen Wrench (1.5 mm) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. • Cup Wheel (NK06104, NK45800) : 1 pc. each • Rubber Pad (NK11033) : 1 pc. • Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each * Order by catalog number. 1-p35 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:02 PM ページ 1-p34 HIGH TORQUE PENCIL TYPE AIR GRINDER “IMPULSE” min (rpm) • Durable and quiet high-efficient air grinder. • 60,000 The IMPULSE Series also offers 45 degree and 90 degree models. Choose the type that best fits your • application requirements. -1 1 EmaxEVO CAT. No. NK60100 IMPULSE NSP-601 1 60,000 min-1(rpm) CAT. No. NK45400 IMPULSE NA45-400 40,000 min-1(rpm) ESPERT ESPERT The air motor is assembled with a special vane design which keeps constant speed even under load providing stable grinding and polishing operation. ø0.94" ø0.67" PRESTO II 2 The shape of the grinder is designed for sensitive finger •touch control toward the top of the cutting tool. start is guaranteed. •Smooth The safety design of clamping the chuck up to 1.14" •maintains stable rotation of the cutting tool. ø0.94" 6.61" • Angled model housings are all aluminum alloy. 6.34" 6" IMPULSE 1.5 ROTUS SHEENUS neo SONIC CUTTER EmaxEVO ROTUS • Collet Standard Size : ø1/8" (CHS-3.175) Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 7.41 oz. IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 ø1.13" iSpeed3 iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" CAT. No. NK60100 NSP-601 Price Standard Accessories Model • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. CAT. No. NK45400 Price Standard Accessories Model NA45-400 E2530 / E2550 ø0.897" E3000 - One Piece • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" shape of the grinder is specially designed for sensitive finger •The touch control toward the top of the cutting tool. The front part of the NSP-601 model is made of stainless steel ; the back portion of aluminum alloy. The exhaust air line hose with silencer keeps the noise level to a minimum. To prevent twisting of the double line hose, a 360 degree twist-free joint connects the motor and the hose. Silencer •Excellent Silencer on the exhaust air hose keeps the grinder very quiet. NK45230 IMPULSE NA45-230 •Set-Up Drawing • Air Line Kit AL-H1206 • To Intake Air Hose CAT. No. HPS Xpeed ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 NK45230 • Compressor Price Standard Accessories Model HES810 From Twisting Hose •Free To prevent the twisting of hose, 360˚ Twist-Free Joint connects 3 ø0.897" ø1.32" HES510 E4000 MA • Collet Standard Size : ø1/8" (CHS-3.175) Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 6.70 oz. • Intake Air Coupling 4 HTS • • IMPULSE • Silencer Filter 23,000 min-1(rpm) Angled model housings are all aluminum alloy. 6.42" ø0.94" 3 CAT. No. 6" E4000 E3000 - 80,000rpm Features 1.5 E3000 - 80,000rpm NA45-230 • Air Supply 3 Pieces Set HES510 HES810 • Collet ø1/8" (CHS-3.175) : 1 pc. • Special Grindstone Arbor (NCH-01) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 2 pcs. • Allen Wrench (1.5 mm) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. • Cup Wheel (NK06104, NK45800) : 1 pc. each • Rubber Pad (NK11033) : 1 pc. • Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each HTS HPS the motor and the hose. Xpeed • Use Air Line Kit AL-H1206 or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator) 5 •Connecting Part To Air Line Kit AIR LINE KIT CAT. No. NK90230 IMPULSE NA90-230 6 8 APPLICATION EXAMPLES INDEX 1-p34 & Dismounting Cutting Tool •Mounting Insert the wrench provided into the hole on the spindle and open or close the chuck with the Chuck Wrench to exchange the cutting tool. •Exchangeable Collet • Standard Size : ø1/8" (CHS-3.175) • Optional Collets : CHS-[][] are shown in page (6-p4) Air Filter ø0.94" 7 1.34" PARTS TECHNICAL DATA •Angled model housings are all aluminum alloy. 6.14" Screw for PT 1/4 Pipe 23,000 min-1(rpm) 6 • Collet Standard Size : ø1/8" (CHS-3.175) Optional Collets : CHS-[][] are shown in page (6-p4) • Weight : 6.70 oz. PARTS 7 TECHNICAL DATA 8 Specifications Rotating Speed Air Consumption Proper Air Pressure Hose Length Weight Output Intake Air Hose Length Eraser Hose Length 5 AIR LINE KIT : 60,000 min-1(rpm) : 5.83CFM : 56~85PSI : 4.5 ft : 5.82 oz. : 70W : 4.5 ft : 3.9 ft ø1.32" APPLICATION EXAMPLES INDEX CAT. No. NK90230 Model NA90-230 Price Standard Accessories • Collet ø1/8" (CHS-3.175) : 1 pc. • Special Grindstone Arbor (NCH-01) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 2 pcs. • Allen Wrench (1.5 mm) : 1 pc. • Hose (K-213) 4.5 ft • Silencer (K-208) : 1 pc. • Cup Wheel (NK06104, NK45800) : 1 pc. each • Rubber Pad (NK11033) : 1 pc. • Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each * Order by catalog number. 1-p35 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:02 PM ページ 1-p36 “IMPULSE” AIR LINE KIT & PARTS using IMPULSE series, use with the air line kit AL-H1206 shown below or equivalent air line kit in order to • When provide proper air pressure and lubrication to the air motor. 1 EmaxEVO ESPERT lubricators offered by NAKANISHI are micro-mist type. They are specially designed to supply about 3% * ofAllvisual drip rate (about 30 drops/min) into the secondary side (air motor). CAT. No. 4506 AIR LINE KIT AL-H1206 (Automatic Lubricating Device) ROTUS 11.81" 10.24" 0.79" IMPULSE PRESTO II R3.5mm ø15mm 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 5 µm) E2530 / E2550 2-ø7mm ø0.897" E3000 - One Piece E3000 - 80,000rpm CAT. No. Model 1.18" Tool Holder 4.7 2" E3000 - Modular ø1.0"/ø0.98" ø0.897" ESPERT Product PF1/4 ø1.0"/ø0.98" ø1.18" Optional Accessories for the Impulse. 8.66" 6.69" E2530 / E2550 0.79" ø6 mm SHEENUS neo SONIC CUTTER iSpeed3 0.79" smooth air flow and automatic lubrication, ensuring stable • Supplies speed and power. lubrication and air pressure settings provide longevity to • Adjustable the Air Grinder. for grinding and polishing applications. This compact Air Line • Best Kit allows for portability or stationary mounting as well as a carrier 1 4506 AL-H1206 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. EmaxEVO CAT.No. Grit O.D. NK06104 NK45800 NK45801 NK86A46S 64842 64844 64846 64847 64849 # 80 Ø 20 # 80 Ø 30 # 80 Ø 30 # 46 Ø 30 # 80 Ø 30 # 120 Ø 30 # 180 Ø 30 # 240 Ø 30 # 400 Ø 30 (mm) Description • Model Price Product Standard Cup Wheel (12 pcs./pack) CAT.No. Grit O.D. (mm) 64821 Ø 20 NK11033 Ø 30 Standard Hard Description • Model Price Rubber Pad (5 pcs./pack) (use sandpaper) IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Hard 2 Polishing Sander (5 pcs./pack) iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Price E2530 / E2550 ø0.897" E3000 - One Piece • The Exchangeable Attachment Chart E3000 - Modular If you replace the Cup Grinding Stone with a ø1/8" Collet, a mounted grindstone can be used. When using a Collet, the wheel cover is removable for better visibility if necessary. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Remove Head Cover 3 • Collet CHS-[][] MA ø0.897" ø1.18" E4000 3 • Grindstone Arbor NCH-01 MA ø1.0" ø0.98" ROTUS ø0.897" • Cup Wheel • Mounted Grindstone • Sandpaper Disk • Felt Disk *When using a rubber pad, slow down the rotating speed. ø1.0" ø0.98" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 IMPULSE Spare Parts Product 1.14" HES810 HTS Description CAT. No. Model (for Cup Wheel & Rubber Pad) NK11045 NCH-01 IMPULSE Head Cover NK11043 CNA IMPULSE Price Fit to Grindstone Arbor HES510 HES810 HTS HPS HPS Xpeed 5 AIR LINE KIT 6 3.15" Hose 4.5 ft K076211 K-213 IMPULSE Silencer Small (w/Metal Fittings) AA10055 K-208 IMPULSE Wrench 8 x 5 mm (0.31" x 0.20") RA12012 Bar Wrench (2.83") RE22015 Xpeed 5 AIR LINE KIT 6 IMPULSE PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 1-p36 4 PARTS K-212 Allen Wrench (1.5 mm) IMPULSE Available in the market IMPULSE Lubricating Oil (4 oz.) AA10478 Lubricating Oil (32 oz.) AA10480 K-211 For Air Line Kit AL-H1206 7 TECHNICAL DATA 8 APPLICATION EXAMPLES K-202 For Air Line Kit AL-H1206 INDEX * Order by catalog number. 1-p37 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:02 PM ページ 1-p36 “IMPULSE” AIR LINE KIT & PARTS using IMPULSE series, use with the air line kit AL-H1206 shown below or equivalent air line kit in order to • When provide proper air pressure and lubrication to the air motor. 1 EmaxEVO ESPERT lubricators offered by NAKANISHI are micro-mist type. They are specially designed to supply about 3% * ofAllvisual drip rate (about 30 drops/min) into the secondary side (air motor). CAT. No. 4506 AIR LINE KIT AL-H1206 (Automatic Lubricating Device) ROTUS 11.81" 10.24" 0.79" IMPULSE PRESTO II R3.5mm ø15mm 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 5 µm) E2530 / E2550 2-ø7mm ø0.897" E3000 - One Piece E3000 - 80,000rpm CAT. No. Model 1.18" Tool Holder 4.7 2" E3000 - Modular ø1.0"/ø0.98" ø0.897" ESPERT Product PF1/4 ø1.0"/ø0.98" ø1.18" Optional Accessories for the Impulse. 8.66" 6.69" E2530 / E2550 0.79" ø6 mm SHEENUS neo SONIC CUTTER iSpeed3 0.79" smooth air flow and automatic lubrication, ensuring stable • Supplies speed and power. lubrication and air pressure settings provide longevity to • Adjustable the Air Grinder. for grinding and polishing applications. This compact Air Line • Best Kit allows for portability or stationary mounting as well as a carrier 1 4506 AL-H1206 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. EmaxEVO CAT.No. Grit O.D. NK06104 NK45800 NK45801 NK86A46S 64842 64844 64846 64847 64849 # 80 Ø 20 # 80 Ø 30 # 80 Ø 30 # 46 Ø 30 # 80 Ø 30 # 120 Ø 30 # 180 Ø 30 # 240 Ø 30 # 400 Ø 30 (mm) Description • Model Price Product Standard Cup Wheel (12 pcs./pack) CAT.No. Grit O.D. (mm) 64821 Ø 20 NK11033 Ø 30 Standard Hard Description • Model Price Rubber Pad (5 pcs./pack) (use sandpaper) IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Hard 2 Polishing Sander (5 pcs./pack) iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Price E2530 / E2550 ø0.897" E3000 - One Piece • The Exchangeable Attachment Chart E3000 - Modular If you replace the Cup Grinding Stone with a ø1/8" Collet, a mounted grindstone can be used. When using a Collet, the wheel cover is removable for better visibility if necessary. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Remove Head Cover 3 • Collet CHS-[][] MA ø0.897" ø1.18" E4000 3 • Grindstone Arbor NCH-01 MA ø1.0" ø0.98" ROTUS ø0.897" • Cup Wheel • Mounted Grindstone • Sandpaper Disk • Felt Disk *When using a rubber pad, slow down the rotating speed. ø1.0" ø0.98" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 IMPULSE Spare Parts Product 1.14" HES810 HTS Description CAT. No. Model (for Cup Wheel & Rubber Pad) NK11045 NCH-01 IMPULSE Head Cover NK11043 CNA IMPULSE Price Fit to Grindstone Arbor HES510 HES810 HTS HPS HPS Xpeed 5 AIR LINE KIT 6 3.15" Hose 4.5 ft K076211 K-213 IMPULSE Silencer Small (w/Metal Fittings) AA10055 K-208 IMPULSE Wrench 8 x 5 mm (0.31" x 0.20") RA12012 Bar Wrench (2.83") RE22015 Xpeed 5 AIR LINE KIT 6 IMPULSE PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 1-p36 4 PARTS K-212 Allen Wrench (1.5 mm) IMPULSE Available in the market IMPULSE Lubricating Oil (4 oz.) AA10478 Lubricating Oil (32 oz.) AA10480 K-211 For Air Line Kit AL-H1206 7 TECHNICAL DATA 8 APPLICATION EXAMPLES K-202 For Air Line Kit AL-H1206 INDEX * Order by catalog number. 1-p37 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:03 PM ページ 1-p38 ULTRA-PRECISION HIGH SPEED AIR TURBINE GRINDER “PRESTO ” min (rpm) • 320,000 Ultra-high speed no lube air turbine handpiece ideal for delicate processing application. • Chip air blows away the cutting powder and cools the cutting tool. • Built-in dust protect mechanism developed by NAKANISHI ensures long durability. • -1 1 EmaxEVO ESPERT CAT. No. Ultra Sonic Products 1 EmaxEVO Y150022 PRESTO II STANDARD SET ROTUS SHEENUS neo 4.28" IMPULSE 22.5 KHz ø0.62" SHEENUS neo SONIC CUTTER PRESTO II is a ultra high speed 320,000 min (rpm) non-lube air turbine. It is •most suitable for precision processing works such as small precision parts, -1 2 ceramic, correction of printed circuit board, etc. due to its non-lube handpiece. Flexible tubing ensures excellent workability reducing fatigue to the operater's hand for long continuous use. iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • NAKANISHI's Own Dust Protection Mechanism Specifications Rotating Speed Proper Air Pressure Weight Inside Diameter Air Consumption ULTRASONIC POLISHER • SHEENUS neo can be used for grinding, polishing and mirror finishing on a wide range of materials from aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. • This tool quickly removes hard layer of EDM deposits and polishes difficult areas such as complex corners and ribs. Chip Air Mechanism blows away the cutting powder to improves cutting efficiency. It also reduces the heat generated by cutting to extend the service life of the bur. : 320,000 min-1(rpm) : 35PSI : 2.50 oz. (w/o Hose) : ø1.6 mm Bur Only : 1.41CFM MA ø0.897" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 CAT. No. Model Y150022 PR2-304S SONIC-CUTTER Price Standard Equipment • Presto Handpiece (PR-304) • Air Line Kit (PR2-06) • Foot Control (AFC-40) • Handpiece Holder (Z014) Product ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 2 ø1.18" PRESTO II Standard Set MS 4 SHEENUS neo SONIC CUTTER E3000 - Modular CAT. No. Model T815001 PR-304 Standard Accessories CAT. No. HIGH PERFORMANCE ULTRA-SONIC CUTTER Not available for sale in Europe. *• Max. Output Power : 30W Specifications Description · Model Z307015I HPS Xpeed 5 AIR LINE KIT Price PRESTO II Air Line Kit PR2-06 PRESTO Foot Control AFC-40 T815016I PRESTO II / PRESTO Cartridge PR-03 Z101240 Piping Hose K-237 ø1.0" ø0.98" ø1.18" • Intricate and accurate cutting with a light touch. • Machine attachment type is also available. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS (w/o Lubricator · Filter Mesh 5 µm ) Z100001 MA MS • 6 ft Hose HES810 HTS 39.5 KHz Price PRESTO II Spare Parts Product 3 ø0.897" ø1.0" ø0.98" ø1.18" PRESTO II E3000 - One Piece E4000 3 ROTUS IMPULSE PRESTO II E3000 - One Piece ESPERT Xpeed 5 AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA 8 APPLICATION EXAMPLES T815220 INDEX Air Turbine Hose K-238 • 6 ft Long • ø0.24" TECHNICAL DATA 8 APPLICATION EXAMPLES • 6 ft Long • ø0.20" INDEX 2.44" HR10303 1-p38 Pin Wrench T-751 * Order by catalog number. 1-p39 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:03 PM ページ 1-p38 ULTRA-PRECISION HIGH SPEED AIR TURBINE GRINDER “PRESTO ” min (rpm) • 320,000 Ultra-high speed no lube air turbine handpiece ideal for delicate processing application. • Chip air blows away the cutting powder and cools the cutting tool. • Built-in dust protect mechanism developed by NAKANISHI ensures long durability. • -1 1 EmaxEVO ESPERT CAT. No. Ultra Sonic Products 1 EmaxEVO Y150022 PRESTO II STANDARD SET ROTUS SHEENUS neo 4.28" IMPULSE 22.5 KHz ø0.62" SHEENUS neo SONIC CUTTER PRESTO II is a ultra high speed 320,000 min (rpm) non-lube air turbine. It is •most suitable for precision processing works such as small precision parts, -1 2 ceramic, correction of printed circuit board, etc. due to its non-lube handpiece. Flexible tubing ensures excellent workability reducing fatigue to the operater's hand for long continuous use. iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • NAKANISHI's Own Dust Protection Mechanism Specifications Rotating Speed Proper Air Pressure Weight Inside Diameter Air Consumption ULTRASONIC POLISHER • SHEENUS neo can be used for grinding, polishing and mirror finishing on a wide range of materials from aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. • This tool quickly removes hard layer of EDM deposits and polishes difficult areas such as complex corners and ribs. Chip Air Mechanism blows away the cutting powder to improves cutting efficiency. It also reduces the heat generated by cutting to extend the service life of the bur. : 320,000 min-1(rpm) : 35PSI : 2.50 oz. (w/o Hose) : ø1.6 mm Bur Only : 1.41CFM MA ø0.897" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 CAT. No. Model Y150022 PR2-304S SONIC-CUTTER Price Standard Equipment • Presto Handpiece (PR-304) • Air Line Kit (PR2-06) • Foot Control (AFC-40) • Handpiece Holder (Z014) Product ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 2 ø1.18" PRESTO II Standard Set MS 4 SHEENUS neo SONIC CUTTER E3000 - Modular CAT. No. Model T815001 PR-304 Standard Accessories CAT. No. HIGH PERFORMANCE ULTRA-SONIC CUTTER Not available for sale in Europe. *• Max. Output Power : 30W Specifications Description · Model Z307015I HPS Xpeed 5 AIR LINE KIT Price PRESTO II Air Line Kit PR2-06 PRESTO Foot Control AFC-40 T815016I PRESTO II / PRESTO Cartridge PR-03 Z101240 Piping Hose K-237 ø1.0" ø0.98" ø1.18" • Intricate and accurate cutting with a light touch. • Machine attachment type is also available. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS (w/o Lubricator · Filter Mesh 5 µm ) Z100001 MA MS • 6 ft Hose HES810 HTS 39.5 KHz Price PRESTO II Spare Parts Product 3 ø0.897" ø1.0" ø0.98" ø1.18" PRESTO II E3000 - One Piece E4000 3 ROTUS IMPULSE PRESTO II E3000 - One Piece ESPERT Xpeed 5 AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA 8 APPLICATION EXAMPLES T815220 INDEX Air Turbine Hose K-238 • 6 ft Long • ø0.24" TECHNICAL DATA 8 APPLICATION EXAMPLES • 6 ft Long • ø0.20" INDEX 2.44" HR10303 1-p38 Pin Wrench T-751 * Order by catalog number. 1-p39 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:03 PM ページ 1-p40 ULTRASONIC POLISHER 1 EmaxEVO “SHEENUS neo” “SHEENUS neo” can be used for grinding, polishing and mirror finishing on a wide range of materials from • aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. . tool quickly removes hard layers of EDM deposits and polishes difficult areas such as complex corners and •• This Capabilities include bur removal, grinding and polishing of precision molds, dies electronic and ceramic components. SHEENUS neo Spare Parts Product ribs Description SHE8103 FC-24 Foot Pedal (ON/OFF switch only) CAT. No. 8094 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 0.03" M6 0.16" 0.75" 0.59" 1.97" 0.04" M6 0.16" 0.59" 0.51" 1.73" Handpiece Model Oscillator Attachment fixing Cable length Dimensions Weight E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" CAT. No. # 200 # 320 # 600 60101 60102 60103 # 200 # 320 # 600 60105 60106 60107 # 200 # 320 # 600 60111 60112 60113 # 200 # 320 # 600 60151 60152 60153 ø0.08" Price 0.39" 1.61" ø0.04" 0.71" 0.28" 1.57" ø0.12" M6 0.31" 0.67" 1.57" M6 0.31" 0.67" 1.57" 0.71" 1.57" 0.08" M6 0.12" 0.28" 0.67" 1.61" 8094 US-25PBS 120V ø0.897" 1.57" 0.79" 2.36" Price 0.04" M6 0.79" 2.76" 4.13" t CONTROL UNIT NE240 120V HES510 M6 0.39" d d constant output power. 0.18" 0.31" 0.39" Carrying Handle CAT. No. (Pullout type) 5 Model 8096 NE240 120V Vibration ON/OFF Switch (At OFF mode Foot Pedal can be operated) Clamp or Unclamp Mode Switch Power Switch AIR LINE KIT Standard Accessories d d Price 0.67" 0.31" CAT. No. 8099 • Fuse AC120V (T1.6AH 250V) : 2 pcs. HANDPIECE US-25PB d=ø0.08" d=ø0.12" d=ø0.13" # 200 # 320 # 600 60191 60192 60193 # 200 # 320 # 600 60115 60116 60117 E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm # 200 # 320 # 600 60911 60912 60913 MA # 200 # 320 # 600 60235 60236 60237 ø1.18" MS t t 0.16" Grain diameter CAT. No. t=ø0.03" t=ø0.04" t=ø0.08" t=ø0.12" t=ø0.13" 60921 60922 60923 60924 60925 t=ø0.04" 60927 Price t t HES810 HTS HPS Xpeed 5 Wood lapping tip Grain diameter CAT. No. d=ø0.08" d=ø0.12" 60801 60802 Price CAT. No. ø0.12" Price 60811 AIR LINE KIT 1.57" 6 0.12" 60805 60815 0.24" PARTS 1.57" 1.57" 4.73" 7 ø0.99" TECHNICAL DATA 0.04" 0.03" 1.97" 8099 Model Specifications US-25PB • Oscillator : PZT piezoelectric type • Attachment fixing : M6 screw • Cable length : 6 ft (2.12 oz.) • Dimensions : ø0.63" (Max. ø1.10") x L5.28" • Weight : 4.94 oz. (excluding cable) Price Grit Color W=0.16" # 180 # 300 # 400 # 600 # 800 # 1,000 # 1,200 Ivory Brown Orange Black Blue White Pink 60701 60702 60703 60704 60705 60706 60707 Price APPLICATION EXAMPLES 1.97" 1.97" provided when only handpiece US-25PB is purchased. 8 ø0.12" W W *Tip holder and Ceramic fiber grindstone in this picture are not Ergonomically comfortable and light for effortless work •over long periods. Lightweight, resin body ergonomically designed to provide •precise control while operating. 4 HES510 M6 0.47" E4000 3 60231 60232 60233 0.79" 0.39" CAT. No. 1-p40 M6 0.39" Brass lapping tip APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" 0.16" d ø0.56" 8 Price 0.08" 7 TECHNICAL DATA 60901 60902 60903 0.79" 1.57" PARTS CAT. No. d=ø0.08" d=ø0.12" d=ø0.13" 0.79" M6 Foot Pedal 6 Grain diameter 0.28" HTS Output Power Control Knob 2 Mode Display Selection Switch E2530 / E2550 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 0.79" Xpeed iSpeed3 ø1.0" ø0.98" 2.76" 4.13" 0.79" HES810 HPS 60185 60186 60187 0.06" 0.31" Displayed Function •Digital 2 Mode Display Selection : “WATT” “POWER” Touch Function Switches •Easy Powerful and Constant •Maximum output of 45W (Center Frequency 22.5KHz) and 4 # 200 # 320 # 600 2 ø0.897" M6 8096 60181 60182 60183 0.06" 0.20" 0.04" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" # 200 # 320 # 600 PRESTO II SHEENUS neo SONIC CUTTER * Flat long type is used to set output power LOW mode. • Control Unit (NE240 120V) • Ultrasonic Handpiece (US-25PB) • Included Accessories : 1 set [ Tip Holder (60902, 60922) 2 pcs., Ceramic fiber grindstone (60725) 1 pc., Electroplated diamond file (60101) 1 pc.] • Tool box (plastic) : 1 pc. • Handpiece stand (K-274) : 1 pc. • Wrench (10 mm) • Allen Wrench (2.5 mm) • Foot Pedal (FC-24) : 1 pc. • Fuse AC120V (T1.6AH 250V) : 2 pcs. ø1.18" MS 60155 60156 60157 5.39" ø1.0" ø0.98" CAT. No. # 200 # 320 # 600 Price ø1.18" M6 SHEENUS neo Standard Set Standard Equipment CAT. No. 0.04" 0.20" Model Grit E2530 / E2550 0.12" CAT. No. ESPERT ø0.897" M6 0.28" M6 0.12" M6 0.16" : US-25PB : PZT piezoelectric type : M6 screw : 6 ft : ø0.63" (Max. ø1.10") x L5.28" : 4.94 oz. (excluding cable) Grit 45˚ 0.04" 0.59" ø0.897" 1 EmaxEVO IMPULSE Unit Model : NE240 120V Power Source : AC120V, 50-60Hz Power consumption : 100VA Dimensions : W8.86" x D7.68" x H3.82" Oscillation frequency : 22.5KHz (center frequency) Power conditioning : Continuous variable type Frequency control : Homing type Output power : UNCLAMP mode Max. 45W : CLAMP mode Max. 20W Weight : 4 lb. 10.07 oz. SHEENUS neo SONIC CUTTER MA 2.5 mm Available in the market Allen Wrench Specifications PRESTO II 3 10 mm Available in the market Wrench ROTUS 0.02" E4000 Description SHEENUS neo STANDARD SET IMPULSE E3000 - 80,000rpm Product K-274 Handpiece Stand 8104 ESPERT ROTUS Price CAT. No. W=0.24" 60711 60712 60713 60714 60715 60716 60717 Price Grit Color W=0.16" # 180 # 300 # 400 # 600 # 800 # 1,000 # 1,200 Ivory Brown Orange Black Blue White Pink 60721 60722 60723 60724 60725 60726 60727 Price W=0.24" 60731 60732 60733 60734 60735 60736 60737 Price Grit Color ø0.12" # 180 # 300 # 400 # 600 # 800 # 1,000 # 1,200 Ivory Red Orange Black Blue White Pink 63101 63102 63103 63104 63105 63106 63107 Price INDEX * Order by catalog number. 1-p41 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:03 PM ページ 1-p40 ULTRASONIC POLISHER 1 EmaxEVO “SHEENUS neo” “SHEENUS neo” can be used for grinding, polishing and mirror finishing on a wide range of materials from • aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. . tool quickly removes hard layers of EDM deposits and polishes difficult areas such as complex corners and •• This Capabilities include bur removal, grinding and polishing of precision molds, dies electronic and ceramic components. SHEENUS neo Spare Parts Product ribs Description SHE8103 FC-24 Foot Pedal (ON/OFF switch only) CAT. No. 8094 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 0.03" M6 0.16" 0.75" 0.59" 1.97" 0.04" M6 0.16" 0.59" 0.51" 1.73" Handpiece Model Oscillator Attachment fixing Cable length Dimensions Weight E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" CAT. No. # 200 # 320 # 600 60101 60102 60103 # 200 # 320 # 600 60105 60106 60107 # 200 # 320 # 600 60111 60112 60113 # 200 # 320 # 600 60151 60152 60153 ø0.08" Price 0.39" 1.61" ø0.04" 0.71" 0.28" 1.57" ø0.12" M6 0.31" 0.67" 1.57" M6 0.31" 0.67" 1.57" 0.71" 1.57" 0.08" M6 0.12" 0.28" 0.67" 1.61" 8094 US-25PBS 120V ø0.897" 1.57" 0.79" 2.36" Price 0.04" M6 0.79" 2.76" 4.13" t CONTROL UNIT NE240 120V HES510 M6 0.39" d d constant output power. 0.18" 0.31" 0.39" Carrying Handle CAT. No. (Pullout type) 5 Model 8096 NE240 120V Vibration ON/OFF Switch (At OFF mode Foot Pedal can be operated) Clamp or Unclamp Mode Switch Power Switch AIR LINE KIT Standard Accessories d d Price 0.67" 0.31" CAT. No. 8099 • Fuse AC120V (T1.6AH 250V) : 2 pcs. HANDPIECE US-25PB d=ø0.08" d=ø0.12" d=ø0.13" # 200 # 320 # 600 60191 60192 60193 # 200 # 320 # 600 60115 60116 60117 E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm # 200 # 320 # 600 60911 60912 60913 MA # 200 # 320 # 600 60235 60236 60237 ø1.18" MS t t 0.16" Grain diameter CAT. No. t=ø0.03" t=ø0.04" t=ø0.08" t=ø0.12" t=ø0.13" 60921 60922 60923 60924 60925 t=ø0.04" 60927 Price t t HES810 HTS HPS Xpeed 5 Wood lapping tip Grain diameter CAT. No. d=ø0.08" d=ø0.12" 60801 60802 Price CAT. No. ø0.12" Price 60811 AIR LINE KIT 1.57" 6 0.12" 60805 60815 0.24" PARTS 1.57" 1.57" 4.73" 7 ø0.99" TECHNICAL DATA 0.04" 0.03" 1.97" 8099 Model Specifications US-25PB • Oscillator : PZT piezoelectric type • Attachment fixing : M6 screw • Cable length : 6 ft (2.12 oz.) • Dimensions : ø0.63" (Max. ø1.10") x L5.28" • Weight : 4.94 oz. (excluding cable) Price Grit Color W=0.16" # 180 # 300 # 400 # 600 # 800 # 1,000 # 1,200 Ivory Brown Orange Black Blue White Pink 60701 60702 60703 60704 60705 60706 60707 Price APPLICATION EXAMPLES 1.97" 1.97" provided when only handpiece US-25PB is purchased. 8 ø0.12" W W *Tip holder and Ceramic fiber grindstone in this picture are not Ergonomically comfortable and light for effortless work •over long periods. Lightweight, resin body ergonomically designed to provide •precise control while operating. 4 HES510 M6 0.47" E4000 3 60231 60232 60233 0.79" 0.39" CAT. No. 1-p40 M6 0.39" Brass lapping tip APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" 0.16" d ø0.56" 8 Price 0.08" 7 TECHNICAL DATA 60901 60902 60903 0.79" 1.57" PARTS CAT. No. d=ø0.08" d=ø0.12" d=ø0.13" 0.79" M6 Foot Pedal 6 Grain diameter 0.28" HTS Output Power Control Knob 2 Mode Display Selection Switch E2530 / E2550 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 0.79" Xpeed iSpeed3 ø1.0" ø0.98" 2.76" 4.13" 0.79" HES810 HPS 60185 60186 60187 0.06" 0.31" Displayed Function •Digital 2 Mode Display Selection : “WATT” “POWER” Touch Function Switches •Easy Powerful and Constant •Maximum output of 45W (Center Frequency 22.5KHz) and 4 # 200 # 320 # 600 2 ø0.897" M6 8096 60181 60182 60183 0.06" 0.20" 0.04" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" # 200 # 320 # 600 PRESTO II SHEENUS neo SONIC CUTTER * Flat long type is used to set output power LOW mode. • Control Unit (NE240 120V) • Ultrasonic Handpiece (US-25PB) • Included Accessories : 1 set [ Tip Holder (60902, 60922) 2 pcs., Ceramic fiber grindstone (60725) 1 pc., Electroplated diamond file (60101) 1 pc.] • Tool box (plastic) : 1 pc. • Handpiece stand (K-274) : 1 pc. • Wrench (10 mm) • Allen Wrench (2.5 mm) • Foot Pedal (FC-24) : 1 pc. • Fuse AC120V (T1.6AH 250V) : 2 pcs. ø1.18" MS 60155 60156 60157 5.39" ø1.0" ø0.98" CAT. No. # 200 # 320 # 600 Price ø1.18" M6 SHEENUS neo Standard Set Standard Equipment CAT. No. 0.04" 0.20" Model Grit E2530 / E2550 0.12" CAT. No. ESPERT ø0.897" M6 0.28" M6 0.12" M6 0.16" : US-25PB : PZT piezoelectric type : M6 screw : 6 ft : ø0.63" (Max. ø1.10") x L5.28" : 4.94 oz. (excluding cable) Grit 45˚ 0.04" 0.59" ø0.897" 1 EmaxEVO IMPULSE Unit Model : NE240 120V Power Source : AC120V, 50-60Hz Power consumption : 100VA Dimensions : W8.86" x D7.68" x H3.82" Oscillation frequency : 22.5KHz (center frequency) Power conditioning : Continuous variable type Frequency control : Homing type Output power : UNCLAMP mode Max. 45W : CLAMP mode Max. 20W Weight : 4 lb. 10.07 oz. SHEENUS neo SONIC CUTTER MA 2.5 mm Available in the market Allen Wrench Specifications PRESTO II 3 10 mm Available in the market Wrench ROTUS 0.02" E4000 Description SHEENUS neo STANDARD SET IMPULSE E3000 - 80,000rpm Product K-274 Handpiece Stand 8104 ESPERT ROTUS Price CAT. No. W=0.24" 60711 60712 60713 60714 60715 60716 60717 Price Grit Color W=0.16" # 180 # 300 # 400 # 600 # 800 # 1,000 # 1,200 Ivory Brown Orange Black Blue White Pink 60721 60722 60723 60724 60725 60726 60727 Price W=0.24" 60731 60732 60733 60734 60735 60736 60737 Price Grit Color ø0.12" # 180 # 300 # 400 # 600 # 800 # 1,000 # 1,200 Ivory Red Orange Black Blue White Pink 63101 63102 63103 63104 63105 63106 63107 Price INDEX * Order by catalog number. 1-p41 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:03 PM ページ 1-p42 HIGH PERFORMANCE ULTRA-SONIC CUTTER 1 EmaxEVO “SONIC-CUTTER” Frequency : 39.5KHz · Max. Output Power : 30W • Oscillating Intricate and accurate cutting with a light touch. • Machine attachment type is also available. • CAT. No. * Not available in Europe. SC71495 SONIC-CUTTER STANDARD SET ESPERT 1 CAT. No. SC71497 SONIC-CUTTER CONTROL UNIT NE80 ESPERT 6.14" Specifications··· • Power Source : AC120V, 50-60Hz • Max. Output Power : 30W • Oscillating Frequency : 39.5KHz • Oscillating System : Automatic Oscillation, Automatic Trucking • Dimensions : W5.91" x D9.84" x H4.72" • Weight : 5 lb. 11.71 oz. ø0.79" ø0.98" ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Hand-Held Type Cutter US-15CB Specifications Piezoelectric Transducer : Bolt-Clamped PZT Type Weight : Approx. 7.41 oz. (w/cord) Cord Length : 10 ft 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Control Unit NE80 E2530 / E2550 Specifications CAT. No. SC71497 Model Standard Accessories NE80 • Ground Wire : 1 pc. • Tool Stand (Spiral Spring) : 1 pc. • Washer : 1 pc. • Tool Stand Holder : 1 pc. • Hexagon Socket Head Bolt : 1 pc. • Allen Wrench (5.0 mm) : 1 pc. ø0.897" Power Source : AC120V, 50-60Hz Max. Output Power : 30W Oscillating Frequency : 39.5KHz Oscillating System : Automatic Oscillation, Automatic Trucking Dimensions : W5.91" x D9.84" x H4.72" Weight : 5 lb. 11.71 oz. E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm CAT. No. MA SC71495 ø0.897" US-15CBS ø1.0" ø0.98" • Control Unit (NE80) : 1 pc. • Hand-Held Sonic-Cutter w/cord (US-15CB) : 1 pc. • Allen Wrench (1.5 mm) : 3 pcs. • Spare Set Screw : 4 pcs. • Spare Blade : 40 pcs. (made by NT Co. BDC-200P 30˚) • Ground Wire : 1 pc. • Tool Stand (Spiral Spring) : 1 pc. • Washer : 1 pc. • Tool Stand Holder : 1 pc. • Hexagon Socket Head Bolt : 1 pc. • Allen Wrench (5.0 mm) : 1 pc. HPS Xpeed • Model 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA OPTIONAL Sonic-Cutter US-l6CB (with clamp) for machine attachment is • The available with internal coolant air joint to withstand long continuous • Power Switch Output ON / OFF Swtich Standard Accessories ø1.0" ø0.98" ø1.18" MS Specifications··· • Piezoelectric Transducer : Bolt-Clamped PZT Type • Weight : Approx. 10.23 oz. (w/cord) • Cord Length : 10 ft 6.14" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS CAT. No. Model SC71499 US-16CB Connector for Cutter Standard Accessories Price • Allen Wrench (1.5 mm) : 3 pcs. • Air Hose (ø4mm x 13 ft) • Spare Set Screw : 4 pcs. • Spare Blade : 40 pcs. (made by NT Co. BDC-200T 30˚) Xpeed 5 AIR LINE KIT 6 PARTS • For correction of PCB patterns • For cutting rubber film, etc. CAT. No. DC200 SPARE BLADE CAT. No. EG11404 FOOT PEDAL FC-40 8 7 TECHNICAL DATA 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX CAT. No. Efficient for cutting and deburring of composite material of FRP and plastic materials. 1-p42 E4000 ø0.897" • Allen Wrench (1.5 mm) : 3 pcs. • Spare Set Screw : 4 pcs. • Spare Blade : 40 pcs. (made by NT Co. BDC-200T 30˚) operation. If Foot Pedal FC-40 is connected, ON-OFF switch operation is made by foot. • For cutting and deburring of plastics • For cutting of sheet, cloth, etc. E3000 - 80,000rpm Price CUTTER FOR MACHINE ATTACHMENT US-16CB Handpiece Stand Output Lamp Power Lamp SC71499 ø1.26" HTS CAT. No. Nomenclature of Control Unit NE80 Output Adjustment Knob ø1.18" ø1.99" HES810 E3000 - Modular 0.16" HES510 Features and Application Samples • • ø0.897" MA CAT. No. SC71496 US-15CB ø1.02" ø0.33" 4 ø1.0"/ø0.98" 3 MS Designed compact and light weight with an easy hand grip to reduce fatigue, the Sonic-Cutter allows for long continuous operation. This ideal handpiece offers excellent maneuverability and there is no vibration to the hand ensuring an accurate and sharp cutting finish. The controller automatically adjusts the output power depending on load so there is no need to make minor adjustments on the controller during the working process. Constant frequency provides steady cutting results. From simple work to fine cutting and complicated shapes, the Sonic-Cutter performs effortlessly and beautifully. 2 E2530 / E2550 6.14" ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" ø0.897" Price Standard Equipment PRESTO II E2530 / E2550 Specifications··· • Piezoelectric Transducer : Bolt-Clamped PZT Type • Weight : Approx. 7.41 oz. (w/cord) • Cord Length : 10 ft ø0.98" 3 Model IMPULSE iSpeed3 SC71496 HAND-HELD TYPE CUTTER US-15CB SONIC-CUTTER Standard Set CAT. No. Price ROTUS E3000 - One Piece ø0.79" E4000 EmaxEVO Delicate and beautiful cutting with a light touch can be made on sheet, cloth, etc. Most suitable for accurate correction work required on PCB. Beautiful cutting finish is made for cutting out designs and patterns on rubber, POP sheet, paper, etc. Model DC200 BDC-200P 30˚ Description Spare Blade Made by NT Co. Spare blade is available at a shop near you. INDEX Price CAT. No. Model EG11404 FC-40 Fit to Price SONIC-CUTTER * Order by catalog number. 1-p43 1-p34-43_IM-SH-SO_A_1407.qxd 14.8.3 4:03 PM ページ 1-p42 HIGH PERFORMANCE ULTRA-SONIC CUTTER 1 EmaxEVO “SONIC-CUTTER” Frequency : 39.5KHz · Max. Output Power : 30W • Oscillating Intricate and accurate cutting with a light touch. • Machine attachment type is also available. • CAT. No. * Not available in Europe. SC71495 SONIC-CUTTER STANDARD SET ESPERT 1 CAT. No. SC71497 SONIC-CUTTER CONTROL UNIT NE80 ESPERT 6.14" Specifications··· • Power Source : AC120V, 50-60Hz • Max. Output Power : 30W • Oscillating Frequency : 39.5KHz • Oscillating System : Automatic Oscillation, Automatic Trucking • Dimensions : W5.91" x D9.84" x H4.72" • Weight : 5 lb. 11.71 oz. ø0.79" ø0.98" ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Hand-Held Type Cutter US-15CB Specifications Piezoelectric Transducer : Bolt-Clamped PZT Type Weight : Approx. 7.41 oz. (w/cord) Cord Length : 10 ft 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Control Unit NE80 E2530 / E2550 Specifications CAT. No. SC71497 Model Standard Accessories NE80 • Ground Wire : 1 pc. • Tool Stand (Spiral Spring) : 1 pc. • Washer : 1 pc. • Tool Stand Holder : 1 pc. • Hexagon Socket Head Bolt : 1 pc. • Allen Wrench (5.0 mm) : 1 pc. ø0.897" Power Source : AC120V, 50-60Hz Max. Output Power : 30W Oscillating Frequency : 39.5KHz Oscillating System : Automatic Oscillation, Automatic Trucking Dimensions : W5.91" x D9.84" x H4.72" Weight : 5 lb. 11.71 oz. E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm CAT. No. MA SC71495 ø0.897" US-15CBS ø1.0" ø0.98" • Control Unit (NE80) : 1 pc. • Hand-Held Sonic-Cutter w/cord (US-15CB) : 1 pc. • Allen Wrench (1.5 mm) : 3 pcs. • Spare Set Screw : 4 pcs. • Spare Blade : 40 pcs. (made by NT Co. BDC-200P 30˚) • Ground Wire : 1 pc. • Tool Stand (Spiral Spring) : 1 pc. • Washer : 1 pc. • Tool Stand Holder : 1 pc. • Hexagon Socket Head Bolt : 1 pc. • Allen Wrench (5.0 mm) : 1 pc. HPS Xpeed • Model 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA OPTIONAL Sonic-Cutter US-l6CB (with clamp) for machine attachment is • The available with internal coolant air joint to withstand long continuous • Power Switch Output ON / OFF Swtich Standard Accessories ø1.0" ø0.98" ø1.18" MS Specifications··· • Piezoelectric Transducer : Bolt-Clamped PZT Type • Weight : Approx. 10.23 oz. (w/cord) • Cord Length : 10 ft 6.14" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS CAT. No. Model SC71499 US-16CB Connector for Cutter Standard Accessories Price • Allen Wrench (1.5 mm) : 3 pcs. • Air Hose (ø4mm x 13 ft) • Spare Set Screw : 4 pcs. • Spare Blade : 40 pcs. (made by NT Co. BDC-200T 30˚) Xpeed 5 AIR LINE KIT 6 PARTS • For correction of PCB patterns • For cutting rubber film, etc. CAT. No. DC200 SPARE BLADE CAT. No. EG11404 FOOT PEDAL FC-40 8 7 TECHNICAL DATA 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX CAT. No. Efficient for cutting and deburring of composite material of FRP and plastic materials. 1-p42 E4000 ø0.897" • Allen Wrench (1.5 mm) : 3 pcs. • Spare Set Screw : 4 pcs. • Spare Blade : 40 pcs. (made by NT Co. BDC-200T 30˚) operation. If Foot Pedal FC-40 is connected, ON-OFF switch operation is made by foot. • For cutting and deburring of plastics • For cutting of sheet, cloth, etc. E3000 - 80,000rpm Price CUTTER FOR MACHINE ATTACHMENT US-16CB Handpiece Stand Output Lamp Power Lamp SC71499 ø1.26" HTS CAT. No. Nomenclature of Control Unit NE80 Output Adjustment Knob ø1.18" ø1.99" HES810 E3000 - Modular 0.16" HES510 Features and Application Samples • • ø0.897" MA CAT. No. SC71496 US-15CB ø1.02" ø0.33" 4 ø1.0"/ø0.98" 3 MS Designed compact and light weight with an easy hand grip to reduce fatigue, the Sonic-Cutter allows for long continuous operation. This ideal handpiece offers excellent maneuverability and there is no vibration to the hand ensuring an accurate and sharp cutting finish. The controller automatically adjusts the output power depending on load so there is no need to make minor adjustments on the controller during the working process. Constant frequency provides steady cutting results. From simple work to fine cutting and complicated shapes, the Sonic-Cutter performs effortlessly and beautifully. 2 E2530 / E2550 6.14" ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" ø0.897" Price Standard Equipment PRESTO II E2530 / E2550 Specifications··· • Piezoelectric Transducer : Bolt-Clamped PZT Type • Weight : Approx. 7.41 oz. (w/cord) • Cord Length : 10 ft ø0.98" 3 Model IMPULSE iSpeed3 SC71496 HAND-HELD TYPE CUTTER US-15CB SONIC-CUTTER Standard Set CAT. No. Price ROTUS E3000 - One Piece ø0.79" E4000 EmaxEVO Delicate and beautiful cutting with a light touch can be made on sheet, cloth, etc. Most suitable for accurate correction work required on PCB. Beautiful cutting finish is made for cutting out designs and patterns on rubber, POP sheet, paper, etc. Model DC200 BDC-200P 30˚ Description Spare Blade Made by NT Co. Spare blade is available at a shop near you. INDEX Price CAT. No. Model EG11404 FC-40 Fit to Price SONIC-CUTTER * Order by catalog number. 1-p43 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:47 PM ページ 1 SWISS-TYPE & CNC LATHE AUTOMATION SOLUTIONS iSpeed3 Series Electric System 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Outside Diameter ø0.75", ø0.79", ø0.87" and ø0.98" IMPULSE (ø19.05, ø20, ø22 and ø25 mm) PRESTO II 1,000~80,000 min-1(rpm) Output 140W / 150W • One Piece Type • • The iSpeed3 series have sensorless motors and are equipped with super precision SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Shorter spindle length is suitable for compact sized automatic CNC lathes. E2530 / E2550 hybrid ceramic bearings for longer spindle life. E3000 - One Piece ø0.897" E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p1 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:47 PM ページ 1 SWISS-TYPE & CNC LATHE AUTOMATION SOLUTIONS iSpeed3 Series Electric System 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Outside Diameter ø0.75", ø0.79", ø0.87" and ø0.98" IMPULSE (ø19.05, ø20, ø22 and ø25 mm) PRESTO II 1,000~80,000 min-1(rpm) Output 140W / 150W • One Piece Type • • The iSpeed3 series have sensorless motors and are equipped with super precision SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Shorter spindle length is suitable for compact sized automatic CNC lathes. E2530 / E2550 hybrid ceramic bearings for longer spindle life. E3000 - One Piece ø0.897" E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p1 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p2 SENSORLESS MOTOR SPINDLE SERIES Outside Diameter 1 One Piece Type ø0.75"(ø19.05mm), ø0.79"(ø20mm), ø0.87"(ø22mm) and ø0.98"(ø25mm) iSpeed3 Series System Chart EmaxEVO ESPERT BM ROTUS Pages 2-p6~p9 IMPULSE EmaxEVO •Automatic Control System Chart Type Sensorless Motor Spindle BM-319 BMF Operation of up to 2 Motor / Spindles •Sequential * ESPERT Type ROTUS Pages 2-p12~p13 2 motors can not be operated simultaneously. Sensorless Motor Spindle BM-320 2 Motor Spindle Motor Cord Air Motor Spindle Air Motor Cord NE273 Control •ON/OFF Unit •R/L Air iSpeed3 IMPULSE Sensorless Motor Spindle BMF-319 PRESTO II SHEENUS neo SONIC CUTTER 1 iSpeed3 Series System Chart PRESTO II SHEENUS neo SONIC CUTTER Compressor Motor Cord -Straight Type Sensorless Motor Spindle BMF-320 Collet Nut CHN-A CNC / PLC (Cord with Quick Disconnect) 2 EMCD-BM3S4M / 6M / 8M Page 2-p14 Collet CHA-[][] iSpeed3 ø1.0"/ø0.98" Sensorless Motor Spindle BM-320F E2530 / E2550 ø0.897" E3000 - 80,000rpm E3000 - One Piece Motor Cord -Angle Type E3000 - Modular (Cord with Quick Disconnect) Sensorless Motor Spindle BM-322 Collet Nut CHN-A EMCD-BM3A4M / 6M / 8M Page 2-p14 Sensorless Motor Spindle BMF-325 Collet CHA-[][] Motor Cord E4000 (Cord with Quick Disconnect) 3 Sensorless Motor Spindle BM-322FL / BM-322FR MA Control Unit NE273 ø1.0"/ø0.98" ø0.897" E3000 - Modular ø1.18" E2530 / E2550 E2530 / E2550 Sensorless Motor Spindle BMF-322 E3000 - One Piece ø1.0"/ø0.98" ø0.897" 120V, 200V 230V, 100V Control Unit NE273 E2530 / E2550 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 120V, 200V 230V, 100V Compressor E4000 EMCD-BM33M / 5M / 7M Page 2-p14 3 Air Line Kit AL-C1204 *1 : Motor Cord is Sold Separately. *Clean dry air is required. MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" Features ø1.18" Compressor MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MS Air Line Kit AL-C1204 Sensorless Motor Spindle BM-322FS • Maximum 60,000 / 80,000 min (rpm) -1 A maximum motor speed 80,000 min-1(rpm) (BM-319, BM-320, BM-320F, BMJ-319, BMJ-320, BMF-319, BMF-320) is realized by using a high performance brushless motor and ceramic bearings. A maximum motor speed 60,000 min-1(rpm) (BM-322, BM-322FL/BM-322FR, BM-322FS, BM-325, BMJ-322, BMJ-325, BMF-322, BMF-325) is realized by using a high performance brushless motor and ceramic bearings. *Clean dry air is required. 4 HES510 Sensorless Motor Spindle BM-325 HES810 • Maximum Motor Power Output 140W / 150W • Air-Cooling System HTS HPS BMJ Xpeed 5 Type Pages 2-p10~p11 iSpeed3 series uses a short body that is hardened and precision ground for excellent durability. Connector Attaches Directly to the • Motor Back of the Motor / Spindle. Simple screw-lock connector makes changing motors extremely easy. Electric and Air feed incorporated into a single connector. APPLICATION EXAMPLES (Cord with Quick Disconnect) Sensorless Motor Spindle BMJ-325 EMCD-BM3A4M / 6M / 8M Page 2-p14 BM-319 BM-320 BM-320F BMJ-319 BMJ-320 BMF-319 BMF-320 7 160 6 140 Output 100 4 80 3 60 Torque 2 40 1 Compressor 20 Continuous Duty Area 0 Air Line Kit AL-C1204 *1 : Motor Cord is Sold Separately. • 120 5 0 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } 70 HTS HPS Xpeed PARTS 80 BM-322 BM-322FL BM-322FR BM-322FS BM-325 BMJ-322 BMJ-325 BMF-322 BMF-325 7 160 6 140 7 TECHNICAL DATA Output 120 5 100 8 80 APPLICATION EXAMPLES 4 Torque 3 60 2 Output (W) Motor Cord -Angle Type • HES810 5 . Sensorless Motor Spindle BMJ-322 120V, 200V 230V, 100V HES510 AIR LINE KIT Torque (cN m) Control Unit NE273 4 6 Output (W) Collet CHA-[][] 8 2-p2 Spindle Accuracy is within 1 µm (TIR). Torque Characteristics Graph EMCD-BM3S4M / 6M / 8M Page 2-p14 . Collet Nut CHN-A (Cord with Quick Disconnect) Torque (cN m) Sensorless Motor Spindle BMJ-320 PARTS INDEX ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Motor Cord -Straight Type 6 7 • Spindle Accuracy • High Rigidity, Short Body Air-cooled motor uses a small volume of air (1.0 CFM) to minimize heat buildup and allow continuous operation. Air pressure required is 23-50 PSI. Sensorless Motor Spindle BMJ-319 AIR LINE KIT TECHNICAL DATA ø1.18" INDEX 40 1 20 Continuous Duty Area 0 0 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } *Clean dry air is required. 2-p3 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p2 SENSORLESS MOTOR SPINDLE SERIES Outside Diameter 1 One Piece Type ø0.75"(ø19.05mm), ø0.79"(ø20mm), ø0.87"(ø22mm) and ø0.98"(ø25mm) iSpeed3 Series System Chart EmaxEVO ESPERT BM ROTUS Pages 2-p6~p9 IMPULSE EmaxEVO •Automatic Control System Chart Type Sensorless Motor Spindle BM-319 BMF Operation of up to 2 Motor / Spindles •Sequential * ESPERT Type ROTUS Pages 2-p12~p13 2 motors can not be operated simultaneously. Sensorless Motor Spindle BM-320 2 Motor Spindle Motor Cord Air Motor Spindle Air Motor Cord NE273 Control •ON/OFF Unit •R/L Air iSpeed3 IMPULSE Sensorless Motor Spindle BMF-319 PRESTO II SHEENUS neo SONIC CUTTER 1 iSpeed3 Series System Chart PRESTO II SHEENUS neo SONIC CUTTER Compressor Motor Cord -Straight Type Sensorless Motor Spindle BMF-320 Collet Nut CHN-A CNC / PLC (Cord with Quick Disconnect) 2 EMCD-BM3S4M / 6M / 8M Page 2-p14 Collet CHA-[][] iSpeed3 ø1.0"/ø0.98" Sensorless Motor Spindle BM-320F E2530 / E2550 ø0.897" E3000 - 80,000rpm E3000 - One Piece Motor Cord -Angle Type E3000 - Modular (Cord with Quick Disconnect) Sensorless Motor Spindle BM-322 Collet Nut CHN-A EMCD-BM3A4M / 6M / 8M Page 2-p14 Sensorless Motor Spindle BMF-325 Collet CHA-[][] Motor Cord E4000 (Cord with Quick Disconnect) 3 Sensorless Motor Spindle BM-322FL / BM-322FR MA Control Unit NE273 ø1.0"/ø0.98" ø0.897" E3000 - Modular ø1.18" E2530 / E2550 E2530 / E2550 Sensorless Motor Spindle BMF-322 E3000 - One Piece ø1.0"/ø0.98" ø0.897" 120V, 200V 230V, 100V Control Unit NE273 E2530 / E2550 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 120V, 200V 230V, 100V Compressor E4000 EMCD-BM33M / 5M / 7M Page 2-p14 3 Air Line Kit AL-C1204 *1 : Motor Cord is Sold Separately. *Clean dry air is required. MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" Features ø1.18" Compressor MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MS Air Line Kit AL-C1204 Sensorless Motor Spindle BM-322FS • Maximum 60,000 / 80,000 min (rpm) -1 A maximum motor speed 80,000 min-1(rpm) (BM-319, BM-320, BM-320F, BMJ-319, BMJ-320, BMF-319, BMF-320) is realized by using a high performance brushless motor and ceramic bearings. A maximum motor speed 60,000 min-1(rpm) (BM-322, BM-322FL/BM-322FR, BM-322FS, BM-325, BMJ-322, BMJ-325, BMF-322, BMF-325) is realized by using a high performance brushless motor and ceramic bearings. *Clean dry air is required. 4 HES510 Sensorless Motor Spindle BM-325 HES810 • Maximum Motor Power Output 140W / 150W • Air-Cooling System HTS HPS BMJ Xpeed 5 Type Pages 2-p10~p11 iSpeed3 series uses a short body that is hardened and precision ground for excellent durability. Connector Attaches Directly to the • Motor Back of the Motor / Spindle. Simple screw-lock connector makes changing motors extremely easy. Electric and Air feed incorporated into a single connector. APPLICATION EXAMPLES (Cord with Quick Disconnect) Sensorless Motor Spindle BMJ-325 EMCD-BM3A4M / 6M / 8M Page 2-p14 BM-319 BM-320 BM-320F BMJ-319 BMJ-320 BMF-319 BMF-320 7 160 6 140 Output 100 4 80 3 60 Torque 2 40 1 Compressor 20 Continuous Duty Area 0 Air Line Kit AL-C1204 *1 : Motor Cord is Sold Separately. • 120 5 0 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } 70 HTS HPS Xpeed PARTS 80 BM-322 BM-322FL BM-322FR BM-322FS BM-325 BMJ-322 BMJ-325 BMF-322 BMF-325 7 160 6 140 7 TECHNICAL DATA Output 120 5 100 8 80 APPLICATION EXAMPLES 4 Torque 3 60 2 Output (W) Motor Cord -Angle Type • HES810 5 . Sensorless Motor Spindle BMJ-322 120V, 200V 230V, 100V HES510 AIR LINE KIT Torque (cN m) Control Unit NE273 4 6 Output (W) Collet CHA-[][] 8 2-p2 Spindle Accuracy is within 1 µm (TIR). Torque Characteristics Graph EMCD-BM3S4M / 6M / 8M Page 2-p14 . Collet Nut CHN-A (Cord with Quick Disconnect) Torque (cN m) Sensorless Motor Spindle BMJ-320 PARTS INDEX ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Motor Cord -Straight Type 6 7 • Spindle Accuracy • High Rigidity, Short Body Air-cooled motor uses a small volume of air (1.0 CFM) to minimize heat buildup and allow continuous operation. Air pressure required is 23-50 PSI. Sensorless Motor Spindle BMJ-319 AIR LINE KIT TECHNICAL DATA ø1.18" INDEX 40 1 20 Continuous Duty Area 0 0 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } *Clean dry air is required. 2-p3 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p4 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE “iSpeed3 SERIES” CONTROL UNIT min (rpm) • Maximum Output 150W • 1,000~80,000 External Input / Output Control Signal • -1 (Refer to 7-p24~p29 page of this catalog) 1 CAT. No. EmaxEVO ROTUS PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 Flange Type ø0.87" (ø19.05mm) (ø22mm) • Input Signal Examples : Start / Stop, Forward / Reverse, Pulse Speed Increase / Decrease, Speed Control, Error Code Release. • Output Signal Examples : Error / Warning, At-Speed, RPM Monitoring, Motor Torque Output. BM-322FR BM-319FC -1 • Max. 60,000min-1 • Max. 150W • Motor Protection System E2530 / E2550 E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular [6] + ø25.4 Bush ø1.18" ø1.0"/ø0.98" ø0.897" [5] [4] [3] [2] This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. CITIZEN Cincom BL20 mounting example ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" •••••• load area • :: Continuous load area • : Intermittent • Overload 4 BM-322 BM-325 -1 [7] [8] [9] • Max. 60,000min-1 • Max. 150W • Max. 60,000min • Max. 150W 3 MA [10] [11] [12] [13] [6] Rotating Speed Display (SPEED) [7] Error Reset Switch (RESET) [8] KEY HOLD Switch [9] DISP (DISPLAY) Switch [10] Control Switch (AUTO / MANUAL) HTS CAT. No. Plug Type AIR LINE KIT 8478 120V 6 8490 230V Model NE273 STAR SB-16 mounting example TSUGAMI C300-III mounting example Standard Equipment · Accessories Price • Power Cord : 6 ft • Air Hose with filter • Motor Connector Cap • Connector Cap A / B (Provided) • Bracket • Plate nut • M3 Screw HES810 5 AIR LINE KIT 6 PARTS PARTS *Please refer to Technical Data 7-p24~p29 in detail about External Input-Output Connector. *Please check the power source plug type and order accordingly. • Power Source Plug Plug Type For 100V (A type) For 120V (B type) 2-p4 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Xpeed iSpeed3 Control Unit 5 INDEX MS HPS Xpeed APPLICATION EXAMPLES ø1.18" HTS [11] Motor Selection Switch (No.1 / No.2) [12] Rotating Direction Selector Switch (FWD./REV.) [13] Start Switch (START) HPS 8 ø1.0" ø0.98" HES510 [1] Load LED (LOAD)* [2] Running LED (RUN) [3] Warning LED (WARNING) [4] Error LED (ERROR) [5] Motor Speed Switch (UP / DOWN) HES810 7 ø0.897" 4 HES510 TECHNICAL DATA ø1.0"/ø0.98" E4000 : NE273 : AC 120V 60Hz, AC 200V 50Hz-60Hz AC 230V 50Hz, AC 100V 50Hz-60Hz (4 types) Motor Speed : 1,000-80,000 min-1(rpm) Max. Output Power : 150W (For ø0.87", ø0.98") Rated Power Consumption : 1.1A Air Flow Volume : 1.0CFM (23-50PSI) Weight : 7 lb. 11.46 oz. Dimensions : W5.59" x D9.21" x H2.83" Straight type for flexible mounting. (ø25mm) E2530 / E2550 E3000 - 80,000rpm Model Power Source (ø22mm) iSpeed3 ø1.0"/ø0.98" ø0.897" Specifications ø0.98" 2 ø1.18" * : Load LED CITIZEN Cincom C16 mounting example ø0.87" SHEENUS neo SONIC CUTTER E3000 - Modular [1] ø1.18" MS PRESTO II ø0.897" ø0.897" Straight Type IMPULSE E3000 - One Piece MA ø1.0" ø0.98" ROTUS E2530 / E2550 E4000 3 ESPERT • Centering Mode Switch • O.D. : ø25.4mm • Length : 33.5mm E3000 - 80,000rpm 1 EmaxEVO The safety relay utilizes normally open contacts. The emergency stop signal lines must be supplied with power to hold the safety relay contacts closed and allow the control unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the iSpeed3 Series control unit and the machining center's controller will cause the relay contacts to open and the iSpeed3 Series motor to stop. Motor Spindle is stopped safely and quickly. A Warning / Error LED is lit, Warning / Error Signal is output to an external device when a problem occurs. ø1.0"/ø0.98" 80,000 min-1(rpm) • Special Safety Version Available Input power required is 120VAC for U.S. usage. Flange type for easy mounting. ø0.75" • Max. 80,000min • Max. 140W iSpeed3 CONTROL UNIT NE273 • Power Source Required • Input / Output Controls Signal Examples : ESPERT IMPULSE 8478 Main Usable Area For Japan For U.S.A. and Canada Interface Cable Page 2-p14 7 TECHNICAL DATA Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Product 8 APPLICATION EXAMPLES Without Plug INDEX For Europe * Order by catalog number. 2-p5 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p4 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE “iSpeed3 SERIES” CONTROL UNIT min (rpm) • Maximum Output 150W • 1,000~80,000 External Input / Output Control Signal • -1 (Refer to 7-p24~p29 page of this catalog) 1 CAT. No. EmaxEVO ROTUS PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 Flange Type ø0.87" (ø19.05mm) (ø22mm) • Input Signal Examples : Start / Stop, Forward / Reverse, Pulse Speed Increase / Decrease, Speed Control, Error Code Release. • Output Signal Examples : Error / Warning, At-Speed, RPM Monitoring, Motor Torque Output. BM-322FR BM-319FC -1 • Max. 60,000min-1 • Max. 150W • Motor Protection System E2530 / E2550 E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular [6] + ø25.4 Bush ø1.18" ø1.0"/ø0.98" ø0.897" [5] [4] [3] [2] This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. CITIZEN Cincom BL20 mounting example ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" •••••• load area • :: Continuous load area • : Intermittent • Overload 4 BM-322 BM-325 -1 [7] [8] [9] • Max. 60,000min-1 • Max. 150W • Max. 60,000min • Max. 150W 3 MA [10] [11] [12] [13] [6] Rotating Speed Display (SPEED) [7] Error Reset Switch (RESET) [8] KEY HOLD Switch [9] DISP (DISPLAY) Switch [10] Control Switch (AUTO / MANUAL) HTS CAT. No. Plug Type AIR LINE KIT 8478 120V 6 8490 230V Model NE273 STAR SB-16 mounting example TSUGAMI C300-III mounting example Standard Equipment · Accessories Price • Power Cord : 6 ft • Air Hose with filter • Motor Connector Cap • Connector Cap A / B (Provided) • Bracket • Plate nut • M3 Screw HES810 5 AIR LINE KIT 6 PARTS PARTS *Please refer to Technical Data 7-p24~p29 in detail about External Input-Output Connector. *Please check the power source plug type and order accordingly. • Power Source Plug Plug Type For 100V (A type) For 120V (B type) 2-p4 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Xpeed iSpeed3 Control Unit 5 INDEX MS HPS Xpeed APPLICATION EXAMPLES ø1.18" HTS [11] Motor Selection Switch (No.1 / No.2) [12] Rotating Direction Selector Switch (FWD./REV.) [13] Start Switch (START) HPS 8 ø1.0" ø0.98" HES510 [1] Load LED (LOAD)* [2] Running LED (RUN) [3] Warning LED (WARNING) [4] Error LED (ERROR) [5] Motor Speed Switch (UP / DOWN) HES810 7 ø0.897" 4 HES510 TECHNICAL DATA ø1.0"/ø0.98" E4000 : NE273 : AC 120V 60Hz, AC 200V 50Hz-60Hz AC 230V 50Hz, AC 100V 50Hz-60Hz (4 types) Motor Speed : 1,000-80,000 min-1(rpm) Max. Output Power : 150W (For ø0.87", ø0.98") Rated Power Consumption : 1.1A Air Flow Volume : 1.0CFM (23-50PSI) Weight : 7 lb. 11.46 oz. Dimensions : W5.59" x D9.21" x H2.83" Straight type for flexible mounting. (ø25mm) E2530 / E2550 E3000 - 80,000rpm Model Power Source (ø22mm) iSpeed3 ø1.0"/ø0.98" ø0.897" Specifications ø0.98" 2 ø1.18" * : Load LED CITIZEN Cincom C16 mounting example ø0.87" SHEENUS neo SONIC CUTTER E3000 - Modular [1] ø1.18" MS PRESTO II ø0.897" ø0.897" Straight Type IMPULSE E3000 - One Piece MA ø1.0" ø0.98" ROTUS E2530 / E2550 E4000 3 ESPERT • Centering Mode Switch • O.D. : ø25.4mm • Length : 33.5mm E3000 - 80,000rpm 1 EmaxEVO The safety relay utilizes normally open contacts. The emergency stop signal lines must be supplied with power to hold the safety relay contacts closed and allow the control unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the iSpeed3 Series control unit and the machining center's controller will cause the relay contacts to open and the iSpeed3 Series motor to stop. Motor Spindle is stopped safely and quickly. A Warning / Error LED is lit, Warning / Error Signal is output to an external device when a problem occurs. ø1.0"/ø0.98" 80,000 min-1(rpm) • Special Safety Version Available Input power required is 120VAC for U.S. usage. Flange type for easy mounting. ø0.75" • Max. 80,000min • Max. 140W iSpeed3 CONTROL UNIT NE273 • Power Source Required • Input / Output Controls Signal Examples : ESPERT IMPULSE 8478 Main Usable Area For Japan For U.S.A. and Canada Interface Cable Page 2-p14 7 TECHNICAL DATA Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Product 8 APPLICATION EXAMPLES Without Plug INDEX For Europe * Order by catalog number. 2-p5 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p6 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE COOLANT iSpeed3 Series can be used in conjunction with water or oil based coolants. 1 ESPERT COOLANT CAT. No. Straight and Flange Type with Quick Disconnect BM EmaxEVO BM Outside Diameter 7633 SENSORLESS MOTOR SPINDLE BM-320F ø0.79"(ø20mm) Flange Type Motor Spindles for machines with tool block with a blind hole. No Clamping 8" ø1.1 O.D. sizes for all Swiss type machines. iSpeed3 2-ø4.4 through hole 2-ø7.4 countersinking depth 4 30˚ E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 E3000 - Modular ø1.18" CAT. No. Outside Diameter 7626 SENSORLESS MOTOR SPINDLE BM-319 ø0.75"(ø19.05mm) • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 7.41 oz. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm (0.57") E4000 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft Recommended Clamping Area 1.6' Quick Disconnect Cord ø0.897" 0.87" 3.48" 1.59" ø0.46" MA 0 mm ø19.05 -0.01 (ø0.75") 3 0.45" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 80,000 min-1(rpm) 4 7626 Model Standard Equipment · Accessories BM-319 • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES810 Xpeed Outside Diameter 5 ø0.79"(ø20mm) AIR LINE KIT (0.57") 6 0.45" 8 APPLICATION EXAMPLES INDEX 3.48" 1.59" BM-320F • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 25) : 2 pcs. ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece ø1.18" E3000 - 80,000rpm E4000 CAT. No. Outside Diameter 7635 SENSORLESS MOTOR SPINDLE BM-322 ø0.87"(ø22mm) (0.57") 0.45" 0.98" 3.48" 1.54" 60,000 min (rpm) -1 3 • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.82 oz. MA < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.897" ø1.0" ø0.98" ø1.18" MS 4 Sensorless Motor Spindle ø0.87"(ø22 mm) CAT. No. 7635 Model Standard Equipment · Accessories BM-322 • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES510 Price HES810 HTS HPS Xpeed Note : Motor Cord is sold separately. 5 AIR LINE KIT 6 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft ø0.46" 7 TECHNICAL DATA 0.87" 80,000 min-1(rpm) • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.11 oz. Recommended Clamping Area 0 mm ø20 -0.01 (ø0.79") PARTS SENSORLESS MOTOR SPINDLE BM-320 1.6' Quick Disconnect Cord HPS 7628 Standard Equipment · Accessories ESPERT E3000 - Modular Recommended Clamping Area Note : Motor Cord is sold separately. CAT. No. 7633 Model 1 EmaxEVO ø1.0"/ø0.98" ø0.897" Price HES510 HTS CAT. No. Note : Motor Cord is sold separately. Sensorless Motor Spindle ø0.75"(ø19.05 mm) CAT. No. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft Sensorless Motor Spindle ø0.79"(ø20 mm) 0 ø22 -0.01 mm (ø0.87") ø0.46" E3000 - One Piece 1.43" 0 mm ø20 -0.01 (ø0.79") 2 0.90" (22.8 mm) 1.6' Quick Disconnect Cord SHEENUS neo SONIC CUTTER (0.57") 2.87" 0.45" 0.65" 0.79" 1.6' Quick Disconnect Cord PRESTO II Straight and Flange Type Motor/Spindles with pigtail for Motor cords with Quick-Disconnect. 0 mm ø22 -0.01 (ø0.87") ø0.46" • • • IMPULSE ø0.897" • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 9.52 oz. Features: ROTUS 80,000 min-1(rpm) PARTS 7 TECHNICAL DATA Sensorless Motor Spindle ø0.79"(ø20 mm) CAT. No. 7628 Model BM-320 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each 8 Price Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. 2-p6 * Order by catalog number. 2-p7 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p6 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE COOLANT iSpeed3 Series can be used in conjunction with water or oil based coolants. 1 ESPERT COOLANT CAT. No. Straight and Flange Type with Quick Disconnect BM EmaxEVO BM Outside Diameter 7633 SENSORLESS MOTOR SPINDLE BM-320F ø0.79"(ø20mm) Flange Type Motor Spindles for machines with tool block with a blind hole. No Clamping 8" ø1.1 O.D. sizes for all Swiss type machines. iSpeed3 2-ø4.4 through hole 2-ø7.4 countersinking depth 4 30˚ E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 E3000 - Modular ø1.18" CAT. No. Outside Diameter 7626 SENSORLESS MOTOR SPINDLE BM-319 ø0.75"(ø19.05mm) • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 7.41 oz. ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm (0.57") E4000 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft Recommended Clamping Area 1.6' Quick Disconnect Cord ø0.897" 0.87" 3.48" 1.59" ø0.46" MA 0 mm ø19.05 -0.01 (ø0.75") 3 0.45" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 80,000 min-1(rpm) 4 7626 Model Standard Equipment · Accessories BM-319 • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES810 Xpeed Outside Diameter 5 ø0.79"(ø20mm) AIR LINE KIT (0.57") 6 0.45" 8 APPLICATION EXAMPLES INDEX 3.48" 1.59" BM-320F • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 25) : 2 pcs. ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece ø1.18" E3000 - 80,000rpm E4000 CAT. No. Outside Diameter 7635 SENSORLESS MOTOR SPINDLE BM-322 ø0.87"(ø22mm) (0.57") 0.45" 0.98" 3.48" 1.54" 60,000 min (rpm) -1 3 • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.82 oz. MA < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.897" ø1.0" ø0.98" ø1.18" MS 4 Sensorless Motor Spindle ø0.87"(ø22 mm) CAT. No. 7635 Model Standard Equipment · Accessories BM-322 • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES510 Price HES810 HTS HPS Xpeed Note : Motor Cord is sold separately. 5 AIR LINE KIT 6 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft ø0.46" 7 TECHNICAL DATA 0.87" 80,000 min-1(rpm) • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.11 oz. Recommended Clamping Area 0 mm ø20 -0.01 (ø0.79") PARTS SENSORLESS MOTOR SPINDLE BM-320 1.6' Quick Disconnect Cord HPS 7628 Standard Equipment · Accessories ESPERT E3000 - Modular Recommended Clamping Area Note : Motor Cord is sold separately. CAT. No. 7633 Model 1 EmaxEVO ø1.0"/ø0.98" ø0.897" Price HES510 HTS CAT. No. Note : Motor Cord is sold separately. Sensorless Motor Spindle ø0.75"(ø19.05 mm) CAT. No. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft Sensorless Motor Spindle ø0.79"(ø20 mm) 0 ø22 -0.01 mm (ø0.87") ø0.46" E3000 - One Piece 1.43" 0 mm ø20 -0.01 (ø0.79") 2 0.90" (22.8 mm) 1.6' Quick Disconnect Cord SHEENUS neo SONIC CUTTER (0.57") 2.87" 0.45" 0.65" 0.79" 1.6' Quick Disconnect Cord PRESTO II Straight and Flange Type Motor/Spindles with pigtail for Motor cords with Quick-Disconnect. 0 mm ø22 -0.01 (ø0.87") ø0.46" • • • IMPULSE ø0.897" • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 9.52 oz. Features: ROTUS 80,000 min-1(rpm) PARTS 7 TECHNICAL DATA Sensorless Motor Spindle ø0.79"(ø20 mm) CAT. No. 7628 Model BM-320 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each 8 Price Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. 2-p6 * Order by catalog number. 2-p7 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p8 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE & PARTS BM COOLANT ROTUS (0.57") 0.45" 0.57" IMPULSE 1.08" PRESTO II 2.88" 0.98" 20˚ ø1.0"/ø0.98" E2530 / E2550 " BM-322FR E3000 - One Piece E3000 - Modular 20˚ ø1.0"/ø0.98" ø0.897" Standard Equipment · Accessories Model 7639 BM-322FL 7641 BM-322FR E3000 - 80,000rpm (1.17") 0.87" for Applicable Swiss Machines Outside Diameter HES510 ø1.02" ø1.26" 0 mm ø34 -0.01 (ø1.34") ø1.95" 0.87" 1.48" 4-M5 P.C. D ø40 0.35" (1.75") 2.89" HTS This 34mm O.D. / 22mm I.D Sleeve with Idler Gear is designed to •replace the Star CNC standard 8,000 min (rpm) gear driven spindle -1 5 M5 25 BM-322FR / FL 0.39" 0.39" with an NSK / BM-322FL 60,000 min-1(rpm) Motor/Spindle. The rear mounted Idler Gear insures there is no gear interruption of the other Star live spindles. This sleeve is used on the 3,300 and 3,400 positions on the SJ20-R2&R3, SR20J and SR32J. • Weight ................................................................ 12.70 oz. • Applicable Swiss Machines ................ Star Micronics Co., Ltd : SR-20J type C, SR-20R III, SR-32J, SR-20J type N, SR-32J type N Idle Gear (for BM-322FL / BM-322FR) CAT. No. Model Standard Equipment · Accessories 8533 BM3-IG • Hexagon Socket Bolt (M4 x 12) : 4 pcs. 7 SPACER for BM-322FL / BM-322FR Inserting the spacer between the back of •the flange and the face of the machines 8 tool block moves the back of the Motor Spindle forward 10mm to eliminate gear face interference. APPLICATION EXAMPLES Spacer CAT. No. 2 E2530 / E2550 E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular Note : Motor Cord is sold separately. ø1.18" ø1.0"/ø0.98" ø0.897" 0.98" 60,000 min-1(rpm) 3 3.48" 1.54" < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft 7637 Model Standard Equipment · Accessories BM-325 • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 16) : 2 pcs. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Sensorless Motor Spindle ø0.98"(ø25 mm) CAT. No. ø0.897" Price HES810 HTS HPS Xpeed Price Note : Motor Cord is sold separately. 5 AIR LINE KIT PARTS SPLIT BUSHING 7 Hardened and ground split bushings are •available in several sizes to fit most NSK TECHNICAL DATA 8 Spindle/Motors. Page 6-p19 Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Model 1882 SP-22x10L 2-p8 SHEENUS neo SONIC CUTTER 6 TECHNICAL DATA INDEX PRESTO II ø1.0"/ø0.98" • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 35) : 2 pcs. 6 PARTS IMPULSE iSpeed3 Price • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 11.29 oz. Recommended Clamping Area Idle Gear (BM3-IG) ROTUS MA ø0.98"(ø25mm) 0.45" HES810 AIR LINE KIT 7702 BM-322FS Standard Equipment · Accessories SENSORLESS MOTOR SPINDLE BM-325 (0.57") 45 20˚ 7637 12 ˚ (1.17") M4 Gear ˚ 45 22 +0.01 0 mm (ø0.87") 4 Xpeed Model ESPERT E4000 1.6' Quick Disconnect Cord IDLE GEAR BM3-IG 4-ø4.5 P.C. D ø42 HPS Sensorless Motor Spindle ø0.87"(ø22 mm) 1 EmaxEVO E3000 - 80,000rpm CAT. No. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft CAT. No. • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 25) : 2 pcs. ø1.0" ø0.98" MS 0.98" No Clamping ø Price 3 ø0.897" 2.88" 0.98" Note : Motor Cord is sold separately. E4000 MA 0.91" " 3 1.9 Sensorless Motor Spindle ø0.87"(ø22 mm) CAT. No. .57 ø1 ø0.897" (0.57") 0.45" 1.28" 60,000 min-1(rpm) • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 14.46 oz. .5 ø4 2-ø5.2 through hole 2-ø10 countersinking depth 8.5 1.08" E2530 / E2550 1.6' Quick Disconnect Cord iSpeed3 0 mm ø22 -0.01 (ø0.87") BM-322FL 0 mm ø24.95 -0.01 (ø0.98") ø0.46" ø < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft ø0.87"(ø22mm) .5 ø4 " 7 1.5 2 ø1.18" 1.33" No Clamping SHEENUS neo SONIC CUTTER Outside Diameter • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 12.70 oz. 0 mm ø22 -0.01 (ø0.87") ø0.87"(ø22mm) 1.6' Quick Disconnect Cord Outside Diameter SENSORLESS MOTOR SPINDLE BM-322FS 0 mm ø24.95 -0.01 (ø0.98") ø0.46" ESPERT 7702 CAT. No. 60,000 min-1(rpm) 0 ø25 -0.01 mm (ø0.98") ø0.46" EmaxEVO SENSORLESS MOTOR SPINDLE BM-322FL / BM-322FR 1.64" 1 COOLANT Specifications Price Dimensions ø22 (I.D.) x 10mm * Order by catalog number. 2-p9 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p8 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE & PARTS BM COOLANT ROTUS (0.57") 0.45" 0.57" IMPULSE 1.08" PRESTO II 2.88" 0.98" 20˚ ø1.0"/ø0.98" E2530 / E2550 " BM-322FR E3000 - One Piece E3000 - Modular 20˚ ø1.0"/ø0.98" ø0.897" Standard Equipment · Accessories Model 7639 BM-322FL 7641 BM-322FR E3000 - 80,000rpm (1.17") 0.87" for Applicable Swiss Machines Outside Diameter HES510 ø1.02" ø1.26" 0 mm ø34 -0.01 (ø1.34") ø1.95" 0.87" 1.48" 4-M5 P.C. D ø40 0.35" (1.75") 2.89" HTS This 34mm O.D. / 22mm I.D Sleeve with Idler Gear is designed to •replace the Star CNC standard 8,000 min (rpm) gear driven spindle -1 5 M5 25 BM-322FR / FL 0.39" 0.39" with an NSK / BM-322FL 60,000 min-1(rpm) Motor/Spindle. The rear mounted Idler Gear insures there is no gear interruption of the other Star live spindles. This sleeve is used on the 3,300 and 3,400 positions on the SJ20-R2&R3, SR20J and SR32J. • Weight ................................................................ 12.70 oz. • Applicable Swiss Machines ................ Star Micronics Co., Ltd : SR-20J type C, SR-20R III, SR-32J, SR-20J type N, SR-32J type N Idle Gear (for BM-322FL / BM-322FR) CAT. No. Model Standard Equipment · Accessories 8533 BM3-IG • Hexagon Socket Bolt (M4 x 12) : 4 pcs. 7 SPACER for BM-322FL / BM-322FR Inserting the spacer between the back of •the flange and the face of the machines 8 tool block moves the back of the Motor Spindle forward 10mm to eliminate gear face interference. APPLICATION EXAMPLES Spacer CAT. No. 2 E2530 / E2550 E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular Note : Motor Cord is sold separately. ø1.18" ø1.0"/ø0.98" ø0.897" 0.98" 60,000 min-1(rpm) 3 3.48" 1.54" < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft 7637 Model Standard Equipment · Accessories BM-325 • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 16) : 2 pcs. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Sensorless Motor Spindle ø0.98"(ø25 mm) CAT. No. ø0.897" Price HES810 HTS HPS Xpeed Price Note : Motor Cord is sold separately. 5 AIR LINE KIT PARTS SPLIT BUSHING 7 Hardened and ground split bushings are •available in several sizes to fit most NSK TECHNICAL DATA 8 Spindle/Motors. Page 6-p19 Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Model 1882 SP-22x10L 2-p8 SHEENUS neo SONIC CUTTER 6 TECHNICAL DATA INDEX PRESTO II ø1.0"/ø0.98" • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 35) : 2 pcs. 6 PARTS IMPULSE iSpeed3 Price • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 11.29 oz. Recommended Clamping Area Idle Gear (BM3-IG) ROTUS MA ø0.98"(ø25mm) 0.45" HES810 AIR LINE KIT 7702 BM-322FS Standard Equipment · Accessories SENSORLESS MOTOR SPINDLE BM-325 (0.57") 45 20˚ 7637 12 ˚ (1.17") M4 Gear ˚ 45 22 +0.01 0 mm (ø0.87") 4 Xpeed Model ESPERT E4000 1.6' Quick Disconnect Cord IDLE GEAR BM3-IG 4-ø4.5 P.C. D ø42 HPS Sensorless Motor Spindle ø0.87"(ø22 mm) 1 EmaxEVO E3000 - 80,000rpm CAT. No. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft CAT. No. • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 25) : 2 pcs. ø1.0" ø0.98" MS 0.98" No Clamping ø Price 3 ø0.897" 2.88" 0.98" Note : Motor Cord is sold separately. E4000 MA 0.91" " 3 1.9 Sensorless Motor Spindle ø0.87"(ø22 mm) CAT. No. .57 ø1 ø0.897" (0.57") 0.45" 1.28" 60,000 min-1(rpm) • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 14.46 oz. .5 ø4 2-ø5.2 through hole 2-ø10 countersinking depth 8.5 1.08" E2530 / E2550 1.6' Quick Disconnect Cord iSpeed3 0 mm ø22 -0.01 (ø0.87") BM-322FL 0 mm ø24.95 -0.01 (ø0.98") ø0.46" ø < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 10 ft, 16 ft, 22 ft ø0.87"(ø22mm) .5 ø4 " 7 1.5 2 ø1.18" 1.33" No Clamping SHEENUS neo SONIC CUTTER Outside Diameter • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 12.70 oz. 0 mm ø22 -0.01 (ø0.87") ø0.87"(ø22mm) 1.6' Quick Disconnect Cord Outside Diameter SENSORLESS MOTOR SPINDLE BM-322FS 0 mm ø24.95 -0.01 (ø0.98") ø0.46" ESPERT 7702 CAT. No. 60,000 min-1(rpm) 0 ø25 -0.01 mm (ø0.98") ø0.46" EmaxEVO SENSORLESS MOTOR SPINDLE BM-322FL / BM-322FR 1.64" 1 COOLANT Specifications Price Dimensions ø22 (I.D.) x 10mm * Order by catalog number. 2-p9 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p10 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE BMJ COOLANT ESPERT Straight Type without Motor Cord ROTUS Features: EmaxEVO BMJ • • • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 CAT. No. Outside Diameter Straight Motor/Spindles with O.D. sizes for all Swiss type machines. Uses a Straight or 90-Degree Motor Cord that attach to the rear of the Motor/Spindle. Ability to insert the Motor/Spindle from the front or rear of the tool block. 7653 SENSORLESS MOTOR SPINDLE BMJ-322 ø0.87"(ø22mm) (0.57") 0.45" 0.98" 3.22" 1.54" 0.32" < Optional > Motor Cord 60,000 min-1(rpm) • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.70 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft Recommended Clamping Area 0 ø22 -0.01 mm (ø0.87") ø0.46" 1 COOLANT Sensorless Motor Spindle ø0.87"(ø22 mm) iSpeed3 CAT. No. E2530 / E2550 Model Standard Equipment · Accessories ø1.18" CAT. No. Outside Diameter 7651 SENSORLESS MOTOR SPINDLE BMJ-319 ø0.75"(ø19.05mm) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm (0.57") E4000 ø0.897" ø1.0" ø0.98" 0.87" 3.15" 1.59" 0.32" Recommended Clamping Area CAT. No. MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Model 7651 BMJ-319 4 Standard Equipment · Accessories CAT. No. Outside Diameter 7652 SENSORLESS MOTOR SPINDLE BMJ-320 ø0.79"(ø20mm) 5 AIR LINE KIT (0.57") 6 0.45" APPLICATION EXAMPLES 0.87" 3.15" 1.59" Recommended Clamping Area ø0.46" 0 mm ø20 -0.01 (ø0.79") PARTS 8 Outside Diameter 7654 SENSORLESS MOTOR SPINDLE BMJ-325 ø0.98"(ø25mm) E2530 / E2550 0.45" 0.98" 3.22" 1.54" Recommended Clamping Area 0.32" 80,000 min-1(rpm) • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 5.64 oz. 0.32" 7652 BMJ-320 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each INDEX ø1.18" 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Sensorless Motor Spindle ø0.98"(ø25 mm) HES510 Model 7654 BMJ-325 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price 4 HES810 HTS HPS Xpeed Note : Motor Cord is sold separately. 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Sensorless Motor Spindle ø0.79"(ø20 mm) Model ø0.897" E3000 - One Piece 60,000 min-1(rpm) < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft CAT. No. E2530 / E2550 • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.99 oz. CAT. No. HPS 7 2 E4000 CAT. No. (0.57") HES810 TECHNICAL DATA SHEENUS neo SONIC CUTTER E3000 - 80,000rpm • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES510 Xpeed PRESTO II ø1.0"/ø0.98" ø0.897" Price Note : Motor Cord is sold separately. • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Note : Motor Cord is sold separately. Sensorless Motor Spindle ø0.75"(ø19.05 mm) ø1.18" HTS IMPULSE E3000 - Modular • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 5.11 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft ø0.46" MA 0 mm ø19.05 -0.01 (ø0.75") 3 0.45" 7653 BMJ-322 80,000 min-1(rpm) 0 ø25 -0.01 mm (ø0.98") ø0.46" E3000 - Modular ROTUS ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece ESPERT iSpeed3 Price ø1.0"/ø0.98" ø0.897" 1 EmaxEVO 8 Price Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. 2-p10 * Order by catalog number. 2-p11 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p10 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE BMJ COOLANT ESPERT Straight Type without Motor Cord ROTUS Features: EmaxEVO BMJ • • • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 CAT. No. Outside Diameter Straight Motor/Spindles with O.D. sizes for all Swiss type machines. Uses a Straight or 90-Degree Motor Cord that attach to the rear of the Motor/Spindle. Ability to insert the Motor/Spindle from the front or rear of the tool block. 7653 SENSORLESS MOTOR SPINDLE BMJ-322 ø0.87"(ø22mm) (0.57") 0.45" 0.98" 3.22" 1.54" 0.32" < Optional > Motor Cord 60,000 min-1(rpm) • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.70 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft Recommended Clamping Area 0 ø22 -0.01 mm (ø0.87") ø0.46" 1 COOLANT Sensorless Motor Spindle ø0.87"(ø22 mm) iSpeed3 CAT. No. E2530 / E2550 Model Standard Equipment · Accessories ø1.18" CAT. No. Outside Diameter 7651 SENSORLESS MOTOR SPINDLE BMJ-319 ø0.75"(ø19.05mm) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm (0.57") E4000 ø0.897" ø1.0" ø0.98" 0.87" 3.15" 1.59" 0.32" Recommended Clamping Area CAT. No. MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Model 7651 BMJ-319 4 Standard Equipment · Accessories CAT. No. Outside Diameter 7652 SENSORLESS MOTOR SPINDLE BMJ-320 ø0.79"(ø20mm) 5 AIR LINE KIT (0.57") 6 0.45" APPLICATION EXAMPLES 0.87" 3.15" 1.59" Recommended Clamping Area ø0.46" 0 mm ø20 -0.01 (ø0.79") PARTS 8 Outside Diameter 7654 SENSORLESS MOTOR SPINDLE BMJ-325 ø0.98"(ø25mm) E2530 / E2550 0.45" 0.98" 3.22" 1.54" Recommended Clamping Area 0.32" 80,000 min-1(rpm) • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 5.64 oz. 0.32" 7652 BMJ-320 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each INDEX ø1.18" 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Sensorless Motor Spindle ø0.98"(ø25 mm) HES510 Model 7654 BMJ-325 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price 4 HES810 HTS HPS Xpeed Note : Motor Cord is sold separately. 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Sensorless Motor Spindle ø0.79"(ø20 mm) Model ø0.897" E3000 - One Piece 60,000 min-1(rpm) < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft CAT. No. E2530 / E2550 • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.99 oz. CAT. No. HPS 7 2 E4000 CAT. No. (0.57") HES810 TECHNICAL DATA SHEENUS neo SONIC CUTTER E3000 - 80,000rpm • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES510 Xpeed PRESTO II ø1.0"/ø0.98" ø0.897" Price Note : Motor Cord is sold separately. • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Note : Motor Cord is sold separately. Sensorless Motor Spindle ø0.75"(ø19.05 mm) ø1.18" HTS IMPULSE E3000 - Modular • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 5.11 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft ø0.46" MA 0 mm ø19.05 -0.01 (ø0.75") 3 0.45" 7653 BMJ-322 80,000 min-1(rpm) 0 ø25 -0.01 mm (ø0.98") ø0.46" E3000 - Modular ROTUS ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece ESPERT iSpeed3 Price ø1.0"/ø0.98" ø0.897" 1 EmaxEVO 8 Price Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. 2-p10 * Order by catalog number. 2-p11 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p12 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE BMF COOLANT COOLANT 1 Fixed Flange Type without Motor Cord BMF EmaxEVO ESPERT CAT. No. Outside Diameter 7657 SENSORLESS MOTOR SPINDLE BMF-322 ø0.87"(ø22mm) Features: • • • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 Fixed Flange with Straight or 90-Degree Motor Cord that attach to the rear of the Motor/Spindle. (0.57") 0.45" Flange mount eliminates the need to clamp on the O.D. 1.16" 0.32" 3.22" 0.39" 1.66" < Optional > Motor Cord O.D. sizes for all Swiss type machines. iSpeed3 57" ø1. E2530 / E2550 • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.82 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft No Clamping 0 ø22 -0.01 mm (ø0.87") ø0.46" ROTUS Sensorless Motor Spindle ø0.87"(ø22 mm) CAT. No. Model ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece E3000 - Modular ø1.18" CAT. No. Outside Diameter 7655 SENSORLESS MOTOR SPINDLE BMF-319 ø0.75"(ø19.05mm) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm (0.57") E4000 0.45" 3 18" ø1. 30˚ 30˚ 0.90" (22.8mm) MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 80,000 min-1(rpm) CAT. No. Model Body mounting hole 4-ø4.2 through hole 7655 BMF-319 Standard Equipment · Accessories Outside Diameter 7658 ø0.98"(ø25mm) (0.57") Xpeed Outside Diameter ø0.79"(ø20mm) 5 AIR LINE KIT (0.57") 6 0.45" APPLICATION EXAMPLES INDEX 18" ø1. 30˚ 30˚ 0.90" (22.8mm) ø0.46" 0 mm ø20 -0.01 (ø0.79") 7 8 3.15" 0.39" 1.71" No Clamping PARTS TECHNICAL DATA 1.05" 0.32" • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.88 oz. 7656 BMF-320 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 16) : 2 pcs. 2 E2530 / E2550 ø1.0"/ø0.98" ø0.897" E3000 - One Piece ø1.18" 3.48" 0.39" 0.32" 1.66" • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 10.76 oz. Body mounting hole 4-ø5.2 through hole MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Sensorless Motor Spindle ø0.98"(ø25 mm) HES510 CAT. No. 20˚ 20˚ 1.08" 3 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft Model 7658 BMF-325 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 16) : 2 pcs. Price 4 HES810 HTS HPS Xpeed Note : Motor Cord is sold separately. 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Sensorless Motor Spindle ø0.79"(ø20 mm) Model SHEENUS neo SONIC CUTTER E2530 / E2550 60,000 min-1(rpm) < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft CAT. No. Body mounting hole 4-ø4.2 through hole 1.16" No Clamping 57" ø1. HPS PRESTO II iSpeed3 Price • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 16) : 2 pcs. SENSORLESS MOTOR SPINDLE BMF-325 0.45" 80,000 min-1(rpm) IMPULSE E4000 CAT. No. • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 16) : 2 pcs. SENSORLESS MOTOR SPINDLE BMF-320 ROTUS E3000 - 80,000rpm HES510 7656 ESPERT ø1.0"/ø0.98" ø0.897" Note : Motor Cord is sold separately. CAT. No. 1 EmaxEVO E3000 - Modular Price HES810 Standard Equipment · Accessories Note : Motor Cord is sold separately. Sensorless Motor Spindle ø0.75"(ø19.05 mm) 4 HTS 7657 BMF-322 Body mounting hole 4-ø5.2 through hole • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.35 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft ø0.46" 0 mm ø19.05 -0.01 (ø0.75") ø0.897" ø1.18" 0.32" 1.71" No Clamping MA ø1.0" ø0.98" 3.15" 1.05" 0.39" 20˚ 20˚ 1.08" 0 mm ø25 -0.01 (ø0.98") ø0.46" ø0.897" 60,000 min-1(rpm) 8 Price Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. 2-p12 * Order by catalog number. 2-p13 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p12 “iSpeed3 SERIES” SENSORLESS MOTOR SPINDLE BMF COOLANT COOLANT 1 Fixed Flange Type without Motor Cord BMF EmaxEVO ESPERT CAT. No. Outside Diameter 7657 SENSORLESS MOTOR SPINDLE BMF-322 ø0.87"(ø22mm) Features: • • • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 Fixed Flange with Straight or 90-Degree Motor Cord that attach to the rear of the Motor/Spindle. (0.57") 0.45" Flange mount eliminates the need to clamp on the O.D. 1.16" 0.32" 3.22" 0.39" 1.66" < Optional > Motor Cord O.D. sizes for all Swiss type machines. iSpeed3 57" ø1. E2530 / E2550 • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.82 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft No Clamping 0 ø22 -0.01 mm (ø0.87") ø0.46" ROTUS Sensorless Motor Spindle ø0.87"(ø22 mm) CAT. No. Model ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece E3000 - Modular ø1.18" CAT. No. Outside Diameter 7655 SENSORLESS MOTOR SPINDLE BMF-319 ø0.75"(ø19.05mm) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm (0.57") E4000 0.45" 3 18" ø1. 30˚ 30˚ 0.90" (22.8mm) MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 80,000 min-1(rpm) CAT. No. Model Body mounting hole 4-ø4.2 through hole 7655 BMF-319 Standard Equipment · Accessories Outside Diameter 7658 ø0.98"(ø25mm) (0.57") Xpeed Outside Diameter ø0.79"(ø20mm) 5 AIR LINE KIT (0.57") 6 0.45" APPLICATION EXAMPLES INDEX 18" ø1. 30˚ 30˚ 0.90" (22.8mm) ø0.46" 0 mm ø20 -0.01 (ø0.79") 7 8 3.15" 0.39" 1.71" No Clamping PARTS TECHNICAL DATA 1.05" 0.32" • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.88 oz. 7656 BMF-320 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 16) : 2 pcs. 2 E2530 / E2550 ø1.0"/ø0.98" ø0.897" E3000 - One Piece ø1.18" 3.48" 0.39" 0.32" 1.66" • Motor Speed ................................... 1,000~60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 150W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 10.76 oz. Body mounting hole 4-ø5.2 through hole MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Sensorless Motor Spindle ø0.98"(ø25 mm) HES510 CAT. No. 20˚ 20˚ 1.08" 3 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft Model 7658 BMF-325 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 16) : 2 pcs. Price 4 HES810 HTS HPS Xpeed Note : Motor Cord is sold separately. 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Sensorless Motor Spindle ø0.79"(ø20 mm) Model SHEENUS neo SONIC CUTTER E2530 / E2550 60,000 min-1(rpm) < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft CAT. No. Body mounting hole 4-ø4.2 through hole 1.16" No Clamping 57" ø1. HPS PRESTO II iSpeed3 Price • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M5 x 16) : 2 pcs. SENSORLESS MOTOR SPINDLE BMF-325 0.45" 80,000 min-1(rpm) IMPULSE E4000 CAT. No. • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hexagon socket bolt (M4 x 16) : 2 pcs. SENSORLESS MOTOR SPINDLE BMF-320 ROTUS E3000 - 80,000rpm HES510 7656 ESPERT ø1.0"/ø0.98" ø0.897" Note : Motor Cord is sold separately. CAT. No. 1 EmaxEVO E3000 - Modular Price HES810 Standard Equipment · Accessories Note : Motor Cord is sold separately. Sensorless Motor Spindle ø0.75"(ø19.05 mm) 4 HTS 7657 BMF-322 Body mounting hole 4-ø5.2 through hole • Motor Speed ................................... 1,000~80,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 140W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.35 oz. < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft ø0.46" 0 mm ø19.05 -0.01 (ø0.75") ø0.897" ø1.18" 0.32" 1.71" No Clamping MA ø1.0" ø0.98" 3.15" 1.05" 0.39" 20˚ 20˚ 1.08" 0 mm ø25 -0.01 (ø0.98") ø0.46" ø0.897" 60,000 min-1(rpm) 8 Price Motor Cord Page 2-p14 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. 2-p12 * Order by catalog number. 2-p13 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p14 “iSpeed3 SERIES” MOTOR CORD & INTERFACE CABLE 1 MOTOR CORD for BM “iSpeed3 SERIES” AIR LINE KIT CAT. No. Type 4504 AIR LINE KIT AL-C1204 EmaxEVO Description · Model Length 9261 Motor Cord 3M EMCD-BM3-3M 10 ft (3.0m) ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 9262 Motor Cord 5M EMCD-BM3-5M 16 ft (5.0m) 9263 Motor Cord 7M EMCD-BM3-7M 22 ft (7.0m) Std. Accessories Fit to Price 0.79" CAT. No. • Air Hose • Connector Protection Cap BM-319 · BM-320 BM-320F · BM-322 BM-322FL · BM-322FR BM-322FS · BM-325 0.79" 9.06" 7.48" ø6 mm Type & BMF Type E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Description · Model Length 9264 EMCD-BM3S-4M Motor Cord 4M 13 ft (4.0m) Motor Cord 6M EMCD-BM3S-6M 19 ft (6.0m) Motor Cord 8M 26 ft (8.0m) CAT. No. 9265 E3000 - 80,000rpm E4000 9266 EMCD-BM3S-8M 3 MA Product CAT. No. Description · Model Length 9267 Motor Cord 4M EMCD-BM3A-4M 13 ft (4.0m) ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 9268 Motor Cord 6M EMCD-BM3A-6M 19 ft (6.0m) 9269 Motor Cord 8M EMCD-BM3A-8M 26 ft (8.0m) Std. Accessories Fit to Price 4.7 2" Product CAT. No. Model 4504 AL-C1204 ø0.897" E3000 - One Piece ROTUS PRESTO II Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 1.18" E2530 / E2550 for BMJ ESPERT SHEENUS neo SONIC CUTTER 2-ø7mm MOTOR CORD of debris while the adjustable regulator provides the correct air pressure for cooling and purging. PF1/4 iSpeed3 ø1.0"/ø0.98" The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts IMPULSE R3.5mm ø15mm 2 E2530 / E2550 0.79" 8.66" 6.69" Product ESPERT 1 EmaxEVO 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular • Air Hose • Connector Protection Cap ø1.18" BMJ-319 · BMJ-320 BMJ-322 · BMJ-325 BMF-319 · BMF-320 BMF-322 · BMF-325 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 Std. Accessories Fit to Price MA ø0.897" ø1.0" ø0.98" • Air Hose • Connector Protection Cap BMJ-319 · BMJ-320 BMJ-322 · BMJ-325 BMF-319 · BMF-320 BMF-322 · BMF-325 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE HPS HPS 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a Xpeed 5 PARTS 7 TECHNICAL DATA 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. AIR LINE KIT 6 HTS 25 Pin Interface Cable CAT. No. 15 Pin Interface Cable Price Model DB25M DB25M blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. For NSK Control Connector A CAT. No. Price Model DB15M DB15M For NSK Control Connector B Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p14 * Order by catalog number. 2-p15 2-p0-15_ispeed_A_1407.qxd 14.8.3 3:48 PM ページ 2-p14 “iSpeed3 SERIES” MOTOR CORD & INTERFACE CABLE 1 MOTOR CORD for BM “iSpeed3 SERIES” AIR LINE KIT CAT. No. Type 4504 AIR LINE KIT AL-C1204 EmaxEVO Description · Model Length 9261 Motor Cord 3M EMCD-BM3-3M 10 ft (3.0m) ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 9262 Motor Cord 5M EMCD-BM3-5M 16 ft (5.0m) 9263 Motor Cord 7M EMCD-BM3-7M 22 ft (7.0m) Std. Accessories Fit to Price 0.79" CAT. No. • Air Hose • Connector Protection Cap BM-319 · BM-320 BM-320F · BM-322 BM-322FL · BM-322FR BM-322FS · BM-325 0.79" 9.06" 7.48" ø6 mm Type & BMF Type E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Description · Model Length 9264 EMCD-BM3S-4M Motor Cord 4M 13 ft (4.0m) Motor Cord 6M EMCD-BM3S-6M 19 ft (6.0m) Motor Cord 8M 26 ft (8.0m) CAT. No. 9265 E3000 - 80,000rpm E4000 9266 EMCD-BM3S-8M 3 MA Product CAT. No. Description · Model Length 9267 Motor Cord 4M EMCD-BM3A-4M 13 ft (4.0m) ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 9268 Motor Cord 6M EMCD-BM3A-6M 19 ft (6.0m) 9269 Motor Cord 8M EMCD-BM3A-8M 26 ft (8.0m) Std. Accessories Fit to Price 4.7 2" Product CAT. No. Model 4504 AL-C1204 ø0.897" E3000 - One Piece ROTUS PRESTO II Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 1.18" E2530 / E2550 for BMJ ESPERT SHEENUS neo SONIC CUTTER 2-ø7mm MOTOR CORD of debris while the adjustable regulator provides the correct air pressure for cooling and purging. PF1/4 iSpeed3 ø1.0"/ø0.98" The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts IMPULSE R3.5mm ø15mm 2 E2530 / E2550 0.79" 8.66" 6.69" Product ESPERT 1 EmaxEVO 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular • Air Hose • Connector Protection Cap ø1.18" BMJ-319 · BMJ-320 BMJ-322 · BMJ-325 BMF-319 · BMF-320 BMF-322 · BMF-325 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 Std. Accessories Fit to Price MA ø0.897" ø1.0" ø0.98" • Air Hose • Connector Protection Cap BMJ-319 · BMJ-320 BMJ-322 · BMJ-325 BMF-319 · BMF-320 BMF-322 · BMF-325 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE HPS HPS 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a Xpeed 5 PARTS 7 TECHNICAL DATA 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. AIR LINE KIT 6 HTS 25 Pin Interface Cable CAT. No. 15 Pin Interface Cable Price Model DB25M DB25M blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. For NSK Control Connector A CAT. No. Price Model DB15M DB15M For NSK Control Connector B Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p14 * Order by catalog number. 2-p15 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:42 PM ページ 2-p16 NC / CNC LATHE & AUTOMATION SOLUTIONS E2530/E2550 Series Electric System 1 1 EmaxEVO EmaxEVO ESPERT ROTUS IMPULSE ESPERT E2530 SERIES 5,000~30,000 min-1(rpm) Output 125W -1 and employs a high-speed, ultra-quiet brushless motor. • High-performance system and state of the art design • Modular Type iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Outside Diameter E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 E2550 SERIES Outside Diameter ø0.897", ø0.98", ø1.0" ø0.897"(ø22.8 mm) 5,000~50,000 min-1(rpm) Output 125W ( ø22.8, ø25, ø25.4 mm) 5,000~50,000 min-1(rpm) Output 125W • The E2550 Series is capable of up to 50,000 min (rpm) -1 and employs a high-speed, ultra-quiet brushless motor. • High-performance system and state of the art design • Modular Type allows high-speed machining and a variety of safety functions. 3 ROTUS 5,000~50,000 min-1(rpm) Output 125W • The E2530 Series is capable of up to 30,000 min (rpm) allows high-speed machining and a variety of safety functions. 2 ø1.0", ø0.98"(ø25.4, ø25 mm) IMPULSE ( ø22.8, ø25, ø25.4 mm) PRESTO II SHEENUS neo SONIC CUTTER Outside Diameter Outside Diameter ø0.897", ø0.98", ø1.0" PRESTO II SHEENUS neo SONIC CUTTER Angle Spindle 2 (Modular Type) Capable of working on corners difficult to iSpeed3 work with straight type and drilling and milling on side face. Three type Angle E2530 / E2550 Head Sizes available. E3000 - One Piece E2530 / E2550 ø1.0"/ø0.98" ø0.897" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 E3000 SERIES 1,000~60,000 min-1(rpm) Output 350W MS (ø20, ø25, ø30 mm) HES810 Outside Diameter [Modular Type] ø0.897", ø0.98", ø1.0", ø1.18" HTS (ø22.8, ø25, ø25.4, ø30 mm) HES510 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Outside Diameter [One Piece Type] ø0.79", ø0.98", ø1.18" 4 HES510 HES810 HTS HPS Xpeed 5 HPS 1,000~80,000 min-1(rpm) Output 350W Outside Diameter [Modular Type] ø1.18" (ø30 mm) ø1.97" (ø50 mm) -Air Bearing Xpeed 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX E4000 SERIES Outside Diameter ø1.57" 8 APPLICATION EXAMPLES (ø40 mm) 2,000~40,000 min-1(rpm) Max. Output 1,200W • Up to ø0.375" Collet Capacity • Designed for use on CNC Lathes, Robots and Special Application Machines for precision milling, drilling grinding, slitting and deburring applications. INDEX Straight Spindle (Modular Type) Suitable for small diameter milling & drilling, slitting, chamfer and grinding operation. 2-p16 2-p17 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:42 PM ページ 2-p16 NC / CNC LATHE & AUTOMATION SOLUTIONS E2530/E2550 Series Electric System 1 1 EmaxEVO EmaxEVO ESPERT ROTUS IMPULSE ESPERT E2530 SERIES 5,000~30,000 min-1(rpm) Output 125W -1 and employs a high-speed, ultra-quiet brushless motor. • High-performance system and state of the art design • Modular Type iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Outside Diameter E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 E2550 SERIES Outside Diameter ø0.897", ø0.98", ø1.0" ø0.897"(ø22.8 mm) 5,000~50,000 min-1(rpm) Output 125W ( ø22.8, ø25, ø25.4 mm) 5,000~50,000 min-1(rpm) Output 125W • The E2550 Series is capable of up to 50,000 min (rpm) -1 and employs a high-speed, ultra-quiet brushless motor. • High-performance system and state of the art design • Modular Type allows high-speed machining and a variety of safety functions. 3 ROTUS 5,000~50,000 min-1(rpm) Output 125W • The E2530 Series is capable of up to 30,000 min (rpm) allows high-speed machining and a variety of safety functions. 2 ø1.0", ø0.98"(ø25.4, ø25 mm) IMPULSE ( ø22.8, ø25, ø25.4 mm) PRESTO II SHEENUS neo SONIC CUTTER Outside Diameter Outside Diameter ø0.897", ø0.98", ø1.0" PRESTO II SHEENUS neo SONIC CUTTER Angle Spindle 2 (Modular Type) Capable of working on corners difficult to iSpeed3 work with straight type and drilling and milling on side face. Three type Angle E2530 / E2550 Head Sizes available. E3000 - One Piece E2530 / E2550 ø1.0"/ø0.98" ø0.897" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 E3000 SERIES 1,000~60,000 min-1(rpm) Output 350W MS (ø20, ø25, ø30 mm) HES810 Outside Diameter [Modular Type] ø0.897", ø0.98", ø1.0", ø1.18" HTS (ø22.8, ø25, ø25.4, ø30 mm) HES510 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Outside Diameter [One Piece Type] ø0.79", ø0.98", ø1.18" 4 HES510 HES810 HTS HPS Xpeed 5 HPS 1,000~80,000 min-1(rpm) Output 350W Outside Diameter [Modular Type] ø1.18" (ø30 mm) ø1.97" (ø50 mm) -Air Bearing Xpeed 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX E4000 SERIES Outside Diameter ø1.57" 8 APPLICATION EXAMPLES (ø40 mm) 2,000~40,000 min-1(rpm) Max. Output 1,200W • Up to ø0.375" Collet Capacity • Designed for use on CNC Lathes, Robots and Special Application Machines for precision milling, drilling grinding, slitting and deburring applications. INDEX Straight Spindle (Modular Type) Suitable for small diameter milling & drilling, slitting, chamfer and grinding operation. 2-p16 2-p17 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:42 PM ページ 2-p18 BRUSHLESS MOTOR & SPINDLE E2530 / E2550 SERIES 1 ø1.0" ø0.98" Modular Type (ø25.4 mm) (ø25 mm) E2530 / E2550 Series ø1.0", ø0.98"(ø25.4, ø25 mm) System Chart 1 Features of E2530 / E2550 Series EmaxEVO • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Transmission Clutch Collet Nut K-265 Collet CHK-[][] The connection part "+" is "concave" 2 ø1.0"/ø0.98" ø0.897" Grindstone Arbor AGM-03 E3000 - 80,000rpm • Air-Cooling system provides Excellent Durability E4000 3 ø0.897" Clean dry air is required to cool the motor and protect the spindle from contaminants. Use a filter and regulator. (Proper air pressure 21~35PSI) (Use Air Line Kit AL-C1204) ø1.0" ø0.98" Collet CHB-[][] Lever Type Spindle NRR-2651 * • May be connected between the motor and the spindle as required for increased torque. Open and Close Lever E2530 HES510 115V 230V HES810 Control Unit NE236 Compressor HPS 5 Air Line Kit AL-C1204 2 • Operating Parameters iSpeed3 The operating parameters can be preset for : *Fixed Motor Speed *Maximum Motor Speed *Operating without Air 2 Motors can be connected (NE145) • (No Simultaneous Operation) Up to 2 motors may be connected to 1 control unit and operated sequentially making this system very easy to use when multiple live tools are required. • Compact Vertical Control Unit 7 Control Unit NE145 NE145-OP1 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" The compact, vertical design of the control unit makes it extremely easy to mount in cramped control cabinets. • Dual Voltage Power Source AC 115V/230V The control unit is compatible with 115-230V main supply voltage and is equipped with a switch for voltage selection. The power supply cord is packaged for your ordered voltage specifications. Fuses and power must be exchanged to compatible component when changing supply voltage. Verify that voltage selection, power cord and fuse type are compatible with supply voltage prior to connecting to power supply. • Stainless Steel Outside Body The housings of the motor and spindle are made from precision ground (SUS416). • Special Safety Version Available (NE145) The safety relay utilizes normally open contacts. The emergency stop signal lines must be supplied with power to hold the safety relay contacts closed and allow the control unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the E2550 Series control unit and the machining center's controller will cause the relay contacts to open and the E2550 Series motor or stop. E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 Automatic Control System Chart E2530 Series Spindle Motor Motor Cord Air 7 •Sequential Operation of up to 2 Motor / Spindles Air not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. PARTS E2550 Series •Single Motor Spindle Operation TECHNICAL DATA E2530 / E2550 E3000 - 80,000rpm E2550 115V 230V PARTS INDEX The E2530 / E2550 Series is equipped with a protective function to stop the spindle rotation automatically in case of overload ensuring safe and smooth operation. When the protective circuit is activated, an error code is shown on the digital display. In case of an air supply failure, the protective circuit limits the motor/spindle to 30,000 min-1(rpm) (E2530) / 25,000 min-1(rpm) (E2550) maximum. This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. *Clean dry air is required. 6 8 • Safe Protective Function • Centering Mode Switch AIR LINE KIT APPLICATION EXAMPLES Wide Variety of Interchangeable Attachments are Available Straight-type spindle is available along with speed reducers to increase torque as well as 90° degree spindles to provide outstanding system flexibility. 4 Xpeed Air-cooled motor uses a small volume of air (1.2CFM) to prevent heat buildup and allow long continuous operation. Regulate the cooling air supply between 21-35PSI. If the air pressure is too low the control will limit the maximum motor speed to 30,000 min-1(rpm) for safety. Brushless Motor (Cord with Quick Disconnect) EM25N-5000-J4 Speed Reducer ARG- H2516N ARG-2516N (1/16 Reduction) MA HTS NR-2551 + EM25N-5000-J4 The brushless DC Motor designs allows for excellent reliability and durability. The brushless DC Motor can be steplessly controlled up to 30,000 / 50,000 min-1(rpm). Speed Reducer ARG-H2504N ARG-2504N (1/4 Reduction) ø1.0"/ø0.98" ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1.36" SHEENUS neo SONIC CUTTER Recommended Clamping Area • Brushless Motor ø1.18" MS PRESTO II The E2530 / E2550 Series motor is a brushless DC motor utilizing hall elements and rare-earth magnet in the rotor. The Motor develops 125W. E3000 - One Piece ø1.18" IMPULSE • Maximum Output 125W Spindle NR-H2551 Spindle NR-2551 ESPERT 4.39" ROTUS 0.80" Arbor for Metal Saw KCH-03 E2530 / E2550 E3000 - Modular 3.02" The connection part "+" is "convex" iSpeed3 E2530 / E2550 7.41" 0.67" ø0.63" ROTUS Interchangeable with a variety of attachments depending on the application. 0 mm ø25-0.01 (ø0.98") ESPERT EmaxEVO NE236 Control Unit •ON/OFF •R/L Compressor Spindle NR-2551 Motor EM25N-5000-J4 Spindle NR-2551 8 APPLICATION EXAMPLES NE145 Control Unit Sequence TECHNICAL DATA Sequence INDEX Motor EM25N-5000-J4 E2550 Series control unit has the ability to control up to *2The motors sequentially. 2 motors can not be run simultaneously. 2-p18 2-p19 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:42 PM ページ 2-p18 BRUSHLESS MOTOR & SPINDLE E2530 / E2550 SERIES 1 ø1.0" ø0.98" Modular Type (ø25.4 mm) (ø25 mm) E2530 / E2550 Series ø1.0", ø0.98"(ø25.4, ø25 mm) System Chart 1 Features of E2530 / E2550 Series EmaxEVO • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Transmission Clutch Collet Nut K-265 Collet CHK-[][] The connection part "+" is "concave" 2 ø1.0"/ø0.98" ø0.897" Grindstone Arbor AGM-03 E3000 - 80,000rpm • Air-Cooling system provides Excellent Durability E4000 3 ø0.897" Clean dry air is required to cool the motor and protect the spindle from contaminants. Use a filter and regulator. (Proper air pressure 21~35PSI) (Use Air Line Kit AL-C1204) ø1.0" ø0.98" Collet CHB-[][] Lever Type Spindle NRR-2651 * • May be connected between the motor and the spindle as required for increased torque. Open and Close Lever E2530 HES510 115V 230V HES810 Control Unit NE236 Compressor HPS 5 Air Line Kit AL-C1204 2 • Operating Parameters iSpeed3 The operating parameters can be preset for : *Fixed Motor Speed *Maximum Motor Speed *Operating without Air 2 Motors can be connected (NE145) • (No Simultaneous Operation) Up to 2 motors may be connected to 1 control unit and operated sequentially making this system very easy to use when multiple live tools are required. • Compact Vertical Control Unit 7 Control Unit NE145 NE145-OP1 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" The compact, vertical design of the control unit makes it extremely easy to mount in cramped control cabinets. • Dual Voltage Power Source AC 115V/230V The control unit is compatible with 115-230V main supply voltage and is equipped with a switch for voltage selection. The power supply cord is packaged for your ordered voltage specifications. Fuses and power must be exchanged to compatible component when changing supply voltage. Verify that voltage selection, power cord and fuse type are compatible with supply voltage prior to connecting to power supply. • Stainless Steel Outside Body The housings of the motor and spindle are made from precision ground (SUS416). • Special Safety Version Available (NE145) The safety relay utilizes normally open contacts. The emergency stop signal lines must be supplied with power to hold the safety relay contacts closed and allow the control unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the E2550 Series control unit and the machining center's controller will cause the relay contacts to open and the E2550 Series motor or stop. E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 Automatic Control System Chart E2530 Series Spindle Motor Motor Cord Air 7 •Sequential Operation of up to 2 Motor / Spindles Air not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. PARTS E2550 Series •Single Motor Spindle Operation TECHNICAL DATA E2530 / E2550 E3000 - 80,000rpm E2550 115V 230V PARTS INDEX The E2530 / E2550 Series is equipped with a protective function to stop the spindle rotation automatically in case of overload ensuring safe and smooth operation. When the protective circuit is activated, an error code is shown on the digital display. In case of an air supply failure, the protective circuit limits the motor/spindle to 30,000 min-1(rpm) (E2530) / 25,000 min-1(rpm) (E2550) maximum. This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. *Clean dry air is required. 6 8 • Safe Protective Function • Centering Mode Switch AIR LINE KIT APPLICATION EXAMPLES Wide Variety of Interchangeable Attachments are Available Straight-type spindle is available along with speed reducers to increase torque as well as 90° degree spindles to provide outstanding system flexibility. 4 Xpeed Air-cooled motor uses a small volume of air (1.2CFM) to prevent heat buildup and allow long continuous operation. Regulate the cooling air supply between 21-35PSI. If the air pressure is too low the control will limit the maximum motor speed to 30,000 min-1(rpm) for safety. Brushless Motor (Cord with Quick Disconnect) EM25N-5000-J4 Speed Reducer ARG- H2516N ARG-2516N (1/16 Reduction) MA HTS NR-2551 + EM25N-5000-J4 The brushless DC Motor designs allows for excellent reliability and durability. The brushless DC Motor can be steplessly controlled up to 30,000 / 50,000 min-1(rpm). Speed Reducer ARG-H2504N ARG-2504N (1/4 Reduction) ø1.0"/ø0.98" ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1.36" SHEENUS neo SONIC CUTTER Recommended Clamping Area • Brushless Motor ø1.18" MS PRESTO II The E2530 / E2550 Series motor is a brushless DC motor utilizing hall elements and rare-earth magnet in the rotor. The Motor develops 125W. E3000 - One Piece ø1.18" IMPULSE • Maximum Output 125W Spindle NR-H2551 Spindle NR-2551 ESPERT 4.39" ROTUS 0.80" Arbor for Metal Saw KCH-03 E2530 / E2550 E3000 - Modular 3.02" The connection part "+" is "convex" iSpeed3 E2530 / E2550 7.41" 0.67" ø0.63" ROTUS Interchangeable with a variety of attachments depending on the application. 0 mm ø25-0.01 (ø0.98") ESPERT EmaxEVO NE236 Control Unit •ON/OFF •R/L Compressor Spindle NR-2551 Motor EM25N-5000-J4 Spindle NR-2551 8 APPLICATION EXAMPLES NE145 Control Unit Sequence TECHNICAL DATA Sequence INDEX Motor EM25N-5000-J4 E2550 Series control unit has the ability to control up to *2The motors sequentially. 2 motors can not be run simultaneously. 2-p18 2-p19 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:42 PM ページ 2-p20 “E2530 SERIES” COMBINATION EXAMPLE “E2530 SERIES” CONTROL UNIT min (rpm) • 5,000~30,000 Max. Output brushless DC Motor with an outside diameter of ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) • External Input(125W) / Output Control Signal • -1 (Refer to 7-p10~p13 page of this catalog) ESPERT • ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) • • • 8602 CAT. No. High Precision and High-Performance Control Unit E2530 CONTROL UNIT NE236 30,000 min-1(rpm) ESPERT Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD [1] Load LED (LOAD)* * : Load LED : Continuous load area : Intermittent load area : Overload • • • [2] Error LED (ERROR) ROTUS [3] Error Reset Switch (RESET) IMPULSE [4] Centering Switch {500 min-1(rpm)} PRESTO II [5] Control Switch (AUTO/MANUAL) [6] Rotating Direction Selector Switch (FWD./REV.) [7] Start Switch (START) [8] Warning LED (WARNING) Motor Connector LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. [10] Rotating Speed Display (SPEED) iSpeed3 [11] Speed Control Potentiometer E2530 / E2550 ø1.0"/ø0.98" [8] [9] [10] Cooling Air Output Joint Air Input Joint E3000 - Modular [11] ø1.18" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" E2530 Series Combination Example 30,000 min-1(rpm) Power Source Power Consumption Weight Dimensions ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 Motor Spindle NE236 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25N-5000-J4 NR-2551 5,000~30,000 min-1(rpm) * 500 min-1(rpm) : for centering 1 lb. 1.74 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions APPLICATION EXAMPLES INDEX 2-p20 E3000 - Modular ø1.18" E3000 - 80,000rpm Power Fuse [1] Product 8602 AS88322P AS81820P 4504 NE236 EM25N-5000-J4 NR-H2551 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit ø0.897" Specifications Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Intake Plug Type Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Total * Maximum Speed (rpm) with the NE236 Control Unit MA Power Switch CAT. No. Price Model 3 [7] E2530 Control Unit E2530, NR-H2551 Combination Example CAT. No. [2] [3] [4] [5] [6] 8602 115V (B type) NE236 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HES810 HTS HPS *Please refer to Technical Data 7-p10~p13 in detail about External Input-Output Connector. *Please check the power source plug type and order accordingly. • Power Source Plug Plug Type Main Usable Area Interface Cable Page 2-p26. Xpeed 5 AIR LINE KIT Product Plug Type Main Usable Area 30,000 min-1(rpm) with Air & 25,000 min-1(rpm) without Air. Product 6 PARTS For 100V (A type) For Japan For 200V (C type) Without Plug TECHNICAL DATA 8 ø0.897" E3000 - One Piece ø1.0"/ø0.98" ø0.897" External Input-Output Connector A, B Motor & Spindle MS E2530 / E2550 E4000 Unit Specifications Model SHEENUS neo SONIC CUTTER 2 [9] Running LED (RUN) Motor Speed Display Motor speed is displayed precisely and digitally. E3000 - One Piece ø1.0"/ø0.98" ø0.897" 1 EmaxEVO External Input-Output Connector (Refer to Technical Data 7-p10~p13 in detail) •••••• 1 EmaxEVO 7 TECHNICAL DATA For 115V (B type) For U.S.A. and Canada For 230V (D type) For Europe 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 2-p21 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:42 PM ページ 2-p20 “E2530 SERIES” COMBINATION EXAMPLE “E2530 SERIES” CONTROL UNIT min (rpm) • 5,000~30,000 Max. Output brushless DC Motor with an outside diameter of ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) • External Input(125W) / Output Control Signal • -1 (Refer to 7-p10~p13 page of this catalog) ESPERT • ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) • • • 8602 CAT. No. High Precision and High-Performance Control Unit E2530 CONTROL UNIT NE236 30,000 min-1(rpm) ESPERT Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD [1] Load LED (LOAD)* * : Load LED : Continuous load area : Intermittent load area : Overload • • • [2] Error LED (ERROR) ROTUS [3] Error Reset Switch (RESET) IMPULSE [4] Centering Switch {500 min-1(rpm)} PRESTO II [5] Control Switch (AUTO/MANUAL) [6] Rotating Direction Selector Switch (FWD./REV.) [7] Start Switch (START) [8] Warning LED (WARNING) Motor Connector LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. [10] Rotating Speed Display (SPEED) iSpeed3 [11] Speed Control Potentiometer E2530 / E2550 ø1.0"/ø0.98" [8] [9] [10] Cooling Air Output Joint Air Input Joint E3000 - Modular [11] ø1.18" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" E2530 Series Combination Example 30,000 min-1(rpm) Power Source Power Consumption Weight Dimensions ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 Motor Spindle NE236 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25N-5000-J4 NR-2551 5,000~30,000 min-1(rpm) * 500 min-1(rpm) : for centering 1 lb. 1.74 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions APPLICATION EXAMPLES INDEX 2-p20 E3000 - Modular ø1.18" E3000 - 80,000rpm Power Fuse [1] Product 8602 AS88322P AS81820P 4504 NE236 EM25N-5000-J4 NR-H2551 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit ø0.897" Specifications Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Intake Plug Type Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Total * Maximum Speed (rpm) with the NE236 Control Unit MA Power Switch CAT. No. Price Model 3 [7] E2530 Control Unit E2530, NR-H2551 Combination Example CAT. No. [2] [3] [4] [5] [6] 8602 115V (B type) NE236 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HES810 HTS HPS *Please refer to Technical Data 7-p10~p13 in detail about External Input-Output Connector. *Please check the power source plug type and order accordingly. • Power Source Plug Plug Type Main Usable Area Interface Cable Page 2-p26. Xpeed 5 AIR LINE KIT Product Plug Type Main Usable Area 30,000 min-1(rpm) with Air & 25,000 min-1(rpm) without Air. Product 6 PARTS For 100V (A type) For Japan For 200V (C type) Without Plug TECHNICAL DATA 8 ø0.897" E3000 - One Piece ø1.0"/ø0.98" ø0.897" External Input-Output Connector A, B Motor & Spindle MS E2530 / E2550 E4000 Unit Specifications Model SHEENUS neo SONIC CUTTER 2 [9] Running LED (RUN) Motor Speed Display Motor speed is displayed precisely and digitally. E3000 - One Piece ø1.0"/ø0.98" ø0.897" 1 EmaxEVO External Input-Output Connector (Refer to Technical Data 7-p10~p13 in detail) •••••• 1 EmaxEVO 7 TECHNICAL DATA For 115V (B type) For U.S.A. and Canada For 230V (D type) For Europe 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 2-p21 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:43 PM ページ 2-p22 “E2550 SERIES” COMBINATION EXAMPLE “E2550 SERIES” CONTROL UNIT min (rpm) • 5,000~50,000 Maximum Output 125W • 2 motors can be connected (No Simultaneous Operation). • External Input / Output Control Signal • -1 (Refer to 7-p14~p17 page of this catalog) EmaxEVO ESPERT • ROTUS IMPULSE PRESTO II • SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) Selector Function Max. 2 motor can be controlled sequentially. 2 motors can not be run simultaneously. • • • External Input-Output Connector (Refer to Technical Data 7-p14~p17 in detail) Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 * : Load LED • • • Xpeed 5 AIR LINE KIT 6 PARTS [5] Control Switch (AUTO/MANUAL) PRESTO II [6] Motor Selector Switch (MOTOR1/MOTOR2) SHEENUS neo SONIC CUTTER [7] Rotating Direction Selector Switch (FWD./REV.) 2 [9] Warning LED (WARNING) [10] Running LED (RUN) iSpeed3 [11] Rotating Speed Display (SPEED) Cooling Air Output Joint ( For motor #1, #2 ) E2530 / E2550 ø1.0"/ø0.98" [12] Speed Control Potentiometer [9] [10] [11] 50,000 min-1(rpm) Power Source Power Consumption Weight Dimensions NE145 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25N-5000-J4 NR-2551 5,000~50,000 min-1(rpm) 500 min-1(rpm) : for centering 1 lb. 1.74 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions E3000 - Modular Power Fuse E4000 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm [1] Power Switch 3 [2] [3] [4] [5] [6] [7] [8] MA ø0.897" Specifications Intake Model : NE145 / NE145-OP1 Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Motor & Spindle Motor Spindle ø0.897" E3000 - One Piece ø1.18" Unit Specifications Model E2530 / E2550 External Input-Output Connector A, B E2550 Control Unit CAT. No. Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 AS88323 NE145 AS88324 NE145-OP1 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HTS HPS IMPULSE [4] Centering Switch {500 min-1(rpm)} : Continuous load area : Intermittent load area : Overload [12] MA ø0.897" ROTUS [3] Error Reset Switch (RESET) Air Input Joint E2550 Series Combination Example 1 ESPERT [2] Error LED (ERROR) Motor Connector #1, #2 ø1.0"/ø0.98" ø0.897" 3 [1] Load LED (LOAD)* [8] Start Switch (START) Motor Speed Display Motor speed is displayed precisely and digitally. ø1.18" E4000 50,000 min-1(rpm) EmaxEVO E3000 - Modular E3000 - 80,000rpm AS88323 E2550 CONTROL UNIT NE145 CAT. No. High Precision and High-Performance Control Unit •••••• 1 E2550, NR-2551 Combination Example HES810 HTS HPS Price CAT. No. Model Product AS88323 AS88322P AS81820P 4504 NE145 EM25N-5000-J4 NR-H2551 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit Total *Please refer to Technical Data 7-p14~p17 in detail about External Input-Output Connector. *The NE145-OP1 is a Special Safety Version that features an "Emergency Stop Input" and "Safety Relay". Please contact us regarding delivery. Interface Cable Page 2-p26 Xpeed 5 AIR LINE KIT • Mounting Bracket 6 Back Mounting Bottom Mounting PARTS 6.14" 4.25" 2.68" 0.39" 7 6.89" 0.79" 6.14" 8.11" 7.62" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4.25" 2.68" 0.98" INDEX 2-p22 0.98" 0.98" 6.89" 8.07" 8.66" 8 APPLICATION EXAMPLES 0.39" 7 TECHNICAL DATA * Order by catalog number. 2-p23 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:43 PM ページ 2-p22 “E2550 SERIES” COMBINATION EXAMPLE “E2550 SERIES” CONTROL UNIT min (rpm) • 5,000~50,000 Maximum Output 125W • 2 motors can be connected (No Simultaneous Operation). • External Input / Output Control Signal • -1 (Refer to 7-p14~p17 page of this catalog) EmaxEVO ESPERT • ROTUS IMPULSE PRESTO II • SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) Selector Function Max. 2 motor can be controlled sequentially. 2 motors can not be run simultaneously. • • • External Input-Output Connector (Refer to Technical Data 7-p14~p17 in detail) Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 * : Load LED • • • Xpeed 5 AIR LINE KIT 6 PARTS [5] Control Switch (AUTO/MANUAL) PRESTO II [6] Motor Selector Switch (MOTOR1/MOTOR2) SHEENUS neo SONIC CUTTER [7] Rotating Direction Selector Switch (FWD./REV.) 2 [9] Warning LED (WARNING) [10] Running LED (RUN) iSpeed3 [11] Rotating Speed Display (SPEED) Cooling Air Output Joint ( For motor #1, #2 ) E2530 / E2550 ø1.0"/ø0.98" [12] Speed Control Potentiometer [9] [10] [11] 50,000 min-1(rpm) Power Source Power Consumption Weight Dimensions NE145 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25N-5000-J4 NR-2551 5,000~50,000 min-1(rpm) 500 min-1(rpm) : for centering 1 lb. 1.74 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions E3000 - Modular Power Fuse E4000 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm [1] Power Switch 3 [2] [3] [4] [5] [6] [7] [8] MA ø0.897" Specifications Intake Model : NE145 / NE145-OP1 Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Motor & Spindle Motor Spindle ø0.897" E3000 - One Piece ø1.18" Unit Specifications Model E2530 / E2550 External Input-Output Connector A, B E2550 Control Unit CAT. No. Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 AS88323 NE145 AS88324 NE145-OP1 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HTS HPS IMPULSE [4] Centering Switch {500 min-1(rpm)} : Continuous load area : Intermittent load area : Overload [12] MA ø0.897" ROTUS [3] Error Reset Switch (RESET) Air Input Joint E2550 Series Combination Example 1 ESPERT [2] Error LED (ERROR) Motor Connector #1, #2 ø1.0"/ø0.98" ø0.897" 3 [1] Load LED (LOAD)* [8] Start Switch (START) Motor Speed Display Motor speed is displayed precisely and digitally. ø1.18" E4000 50,000 min-1(rpm) EmaxEVO E3000 - Modular E3000 - 80,000rpm AS88323 E2550 CONTROL UNIT NE145 CAT. No. High Precision and High-Performance Control Unit •••••• 1 E2550, NR-2551 Combination Example HES810 HTS HPS Price CAT. No. Model Product AS88323 AS88322P AS81820P 4504 NE145 EM25N-5000-J4 NR-H2551 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit Total *Please refer to Technical Data 7-p14~p17 in detail about External Input-Output Connector. *The NE145-OP1 is a Special Safety Version that features an "Emergency Stop Input" and "Safety Relay". Please contact us regarding delivery. Interface Cable Page 2-p26 Xpeed 5 AIR LINE KIT • Mounting Bracket 6 Back Mounting Bottom Mounting PARTS 6.14" 4.25" 2.68" 0.39" 7 6.89" 0.79" 6.14" 8.11" 7.62" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4.25" 2.68" 0.98" INDEX 2-p22 0.98" 0.98" 6.89" 8.07" 8.66" 8 APPLICATION EXAMPLES 0.39" 7 TECHNICAL DATA * Order by catalog number. 2-p23 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:43 PM ページ 2-p24 “E2530 / E2550 SERIES” ø0.98"(ø25 mm) MOTOR EM 25 Product Symbol Outside Diameter N Clutch 5000 J4 Max. Motor Speed Cord Variety N “E2530 / E2550 SERIES” ø1.0", ø0.98"(ø25.4, ø25 mm) SPINDLE Clutch COOLANT E2530 / E2550 Series can be used in conjunction with water or oil based coolants. New Model Name for E2530 / E2550 Series Motor 1 CAT. No. *Do not exceed the allowable motor speed for the spindle. AS88322P BRUSHLESS MOTOR EM25N-5000-J4 (Cord with Quick Disconnect) 50,000 min (rpm) -1 CAT. No. AS81820P SPINDLE NR-H2551 (Ceramic Bearing) 50,000 min-1(rpm) EmaxEVO (1.97") Max. Tool Mounting Depth ROTUS ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 1' D SHEENUS neo SONIC CUTTER 12.1' 3.02" 0.80" • Motor Speed ....................................... 5,000~50,000 min-1(rpm) • Max. Output Power ....................................................... 125W • Housing ............................................. Stainless steel (SUS416) • Cord .................................................................. Length 13 ft • Air Coolant Hose .................................................. Length 13 ft • Weight ......................................................... 8.82 oz. (w/o Cord) • Torque Characteristics of EM25N-5000-J4 Brushless Motor CAT. No. Model AS88322P EM25N5000-J4 < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel with I.D. of ø5 mm ø0.63" PRESTO II E2530 / E2550 0.67" 0 ø25-0.01 mm (ø0.98") IMPULSE iSpeed3 • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 8.92 oz. 4.39" ESPERT 2 1.36" Recommended Clamping Area Outside Diameter Standard Equipment · Accessories * There is not an outside diameter ø1.0"(ø25.4 mm) dimension. ø1.0"/ø0.98" Spindle Designed for increased durability by utilizing ceramic bearings, for •obtaining strong rigidity in both radial direction and thrust directions by utilizing 2 super-precision ceramic bearings on the front side and 2 on the rear side. This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. CAT. No. ø0.897" D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model Outside Diameter Standard Equipment · Accessories AS81820P NR-H2551 AS81819P NR-2551 ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Price 80 Intermittent Duty Area 3 1 E3000 - Modular • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 60 20 30 Speed { x 103 min-1(rpm) } 40 50 50,000 min (rpm) -1 ø0.897" ø1.0" ø0.98" ø1.18" • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHB-3.175) ................................. ø1/8" • Weight ................................................................ 11.64 oz. 0 ø25-0.01 mm (ø0.98") 20 Continuous Duty Area 10 AS81835P LEVER TYPE SPINDLE NRR-2651 40 Torque 0 0 MA CAT. No. No wrenches are required for tool changing. < Optional > • Collet (CHB-[][]) ....................... ø2.0, ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) 4 5 AIR LINE KIT NRR-2651 Installed Example (1.41") OPEN Recommended Clamping Area LOCK 3.07" HPS Exhaust air direction PARTS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS Open and Close Lever (0.22") HTS (1.19") Max. Tool Mounting Depth 1.00" HES810 ø0.27" HES510 7 E3000 - One Piece 3 Output (W) . Torque ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" TECHNICAL DATA 2 E2530 / E2550 100 5 4 MS 6 SHEENUS neo SONIC CUTTER Output 2 Xpeed PRESTO II E2530 / E2550 • Cord with Quick Disconnect ø0.98" • Air Coolant Hose (ø25 mm) • Reducer • Wrench (22 x 27) : 1 pc. 120 6 Torque (cN m) ø1.18" IMPULSE E4000 3 ø1.0" ø0.98" ROTUS 140 7 ø0.897" ESPERT iSpeed3 Price E4000 MA 1 EmaxEVO Lever Type Spindle CAT. No. Model AS81835P NRR-2651 ø0.98"(ø25 mm) Outside Diameter Standard Equipment · Accessories HPS Price • Collet ø1/8" (CHB-3.175) • Wrench (6.1 x 8), (10 x 10), (ø25 mm) (22 x 27): 1 pc. each ø0.98" * There is not an outside diameter ø1.0"(ø25.4 mm) dimension. Xpeed 5 AIR LINE KIT 6 PARTS 0 ø26.8-0.01 mm (ø1.06") 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p24 * Order by catalog number. 2-p25 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:43 PM ページ 2-p24 “E2530 / E2550 SERIES” ø0.98"(ø25 mm) MOTOR EM 25 Product Symbol Outside Diameter N Clutch 5000 J4 Max. Motor Speed Cord Variety N “E2530 / E2550 SERIES” ø1.0", ø0.98"(ø25.4, ø25 mm) SPINDLE Clutch COOLANT E2530 / E2550 Series can be used in conjunction with water or oil based coolants. New Model Name for E2530 / E2550 Series Motor 1 CAT. No. *Do not exceed the allowable motor speed for the spindle. AS88322P BRUSHLESS MOTOR EM25N-5000-J4 (Cord with Quick Disconnect) 50,000 min (rpm) -1 CAT. No. AS81820P SPINDLE NR-H2551 (Ceramic Bearing) 50,000 min-1(rpm) EmaxEVO (1.97") Max. Tool Mounting Depth ROTUS ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 1' D SHEENUS neo SONIC CUTTER 12.1' 3.02" 0.80" • Motor Speed ....................................... 5,000~50,000 min-1(rpm) • Max. Output Power ....................................................... 125W • Housing ............................................. Stainless steel (SUS416) • Cord .................................................................. Length 13 ft • Air Coolant Hose .................................................. Length 13 ft • Weight ......................................................... 8.82 oz. (w/o Cord) • Torque Characteristics of EM25N-5000-J4 Brushless Motor CAT. No. Model AS88322P EM25N5000-J4 < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel with I.D. of ø5 mm ø0.63" PRESTO II E2530 / E2550 0.67" 0 ø25-0.01 mm (ø0.98") IMPULSE iSpeed3 • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 8.92 oz. 4.39" ESPERT 2 1.36" Recommended Clamping Area Outside Diameter Standard Equipment · Accessories * There is not an outside diameter ø1.0"(ø25.4 mm) dimension. ø1.0"/ø0.98" Spindle Designed for increased durability by utilizing ceramic bearings, for •obtaining strong rigidity in both radial direction and thrust directions by utilizing 2 super-precision ceramic bearings on the front side and 2 on the rear side. This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. CAT. No. ø0.897" D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model Outside Diameter Standard Equipment · Accessories AS81820P NR-H2551 AS81819P NR-2551 ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Price 80 Intermittent Duty Area 3 1 E3000 - Modular • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 60 20 30 Speed { x 103 min-1(rpm) } 40 50 50,000 min (rpm) -1 ø0.897" ø1.0" ø0.98" ø1.18" • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHB-3.175) ................................. ø1/8" • Weight ................................................................ 11.64 oz. 0 ø25-0.01 mm (ø0.98") 20 Continuous Duty Area 10 AS81835P LEVER TYPE SPINDLE NRR-2651 40 Torque 0 0 MA CAT. No. No wrenches are required for tool changing. < Optional > • Collet (CHB-[][]) ....................... ø2.0, ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) 4 5 AIR LINE KIT NRR-2651 Installed Example (1.41") OPEN Recommended Clamping Area LOCK 3.07" HPS Exhaust air direction PARTS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS Open and Close Lever (0.22") HTS (1.19") Max. Tool Mounting Depth 1.00" HES810 ø0.27" HES510 7 E3000 - One Piece 3 Output (W) . Torque ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" TECHNICAL DATA 2 E2530 / E2550 100 5 4 MS 6 SHEENUS neo SONIC CUTTER Output 2 Xpeed PRESTO II E2530 / E2550 • Cord with Quick Disconnect ø0.98" • Air Coolant Hose (ø25 mm) • Reducer • Wrench (22 x 27) : 1 pc. 120 6 Torque (cN m) ø1.18" IMPULSE E4000 3 ø1.0" ø0.98" ROTUS 140 7 ø0.897" ESPERT iSpeed3 Price E4000 MA 1 EmaxEVO Lever Type Spindle CAT. No. Model AS81835P NRR-2651 ø0.98"(ø25 mm) Outside Diameter Standard Equipment · Accessories HPS Price • Collet ø1/8" (CHB-3.175) • Wrench (6.1 x 8), (10 x 10), (ø25 mm) (22 x 27): 1 pc. each ø0.98" * There is not an outside diameter ø1.0"(ø25.4 mm) dimension. Xpeed 5 AIR LINE KIT 6 PARTS 0 ø26.8-0.01 mm (ø1.06") 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p24 * Order by catalog number. 2-p25 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:43 PM ページ 2-p26 “E2530 / E2550 SERIES” ø1.0", ø0.98"(ø25.4, ø25 mm) SPEED REDUCER Caution : 1 CAT. No. “E2530 / E2550 SERIES” AIR LINE KIT Use the motor at motor speed less than maximum allowable speed or use a speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. AS81826P SPEED REDUCER 1/4 ARG-H2504N CAT. No. 4504 AIR LINE KIT AL-C1204 EmaxEVO Maximum allowable motor speed 1.87" Maximum rotating speed at the cutting tool ROTUS IMPULSE 7,500 min (rpm) iSpeed3 CAT. No. ø0.897" E3000 - Modular ø1.18" ø6 mm the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model Speed Reduction Ratio Outside Diameter AS81826P ARG-H2504N AS81822P ARG-2504N ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) ESPERT ROTUS PRESTO II SHEENUS neo SONIC CUTTER Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 2-ø7mm Speed Reducer of debris while the adjustable regulator provides the correct air pressure for cooling and purging. PF1/4 30,000 min (rpm) E2530 / E2550 E3000 - One Piece R3.5mm ø15mm -1 ø1.0"/ø0.98" The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts IMPULSE Maximum allowable motor speed E2530 / E2550 0.79" (rpm) Price CAT. No. Model 4504 AL-C1204 1.18" 1 4 -1 9.06" 7.48" -1 4.7 2" Reduction Ratio Maximum rotating speed at the cutting tool 0.79" 8.66" 6.69" SHEENUS neo SONIC CUTTER 2 7,500 min (rpm) -1 • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 5.29 oz. D PRESTO II 30,000 min 0.79" ESPERT 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm Speed Reduction Ratio 1/4 E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 3 CAT. No. Maximum allowable motor speed ø0.897" 2.54" Maximum rotating speed at the cutting tool ø1.0" ø0.98" ø1.18" D Reduction Ratio Maximum rotating speed at the cutting tool 1 16 -1 HES510 1,870 min (rpm) 5 1,870 min -1 (rpm) (rpm) CAT. No. the motor speed unchanged. D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model AS81828P ARG-H2516N AS81824P ARG-2516N Outside Diameter Speed Reduction Ratio PARTS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/16 HTS HPS Xpeed 5 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE • • 3 Meter long Interface Cable provides a DB25 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. 7 8 3 Meter long Interface Cable provides a DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. APPLICATION EXAMPLES 25 Pin Interface Cable CAT. No. 15 Pin Interface Cable Price Model DB25M DB25M 2-p26 ø1.18" AIR LINE KIT TECHNICAL DATA INDEX ø1.0" ø0.98" HES810 Price AIR LINE KIT 6 ø0.897" HES510 Speed Reducer the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping MA An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. 4 30,000 min-1(rpm) HTS Xpeed -1 Maximum allowable motor speed HES810 HPS 30,000 min • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 7.23 oz. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 3 Rotary Coupling MA MS E4000 AS81828P SPEED REDUCER 1/16 ARG-H2516N For NSK Control Connector A CAT. No. Price Model DB15M DB15M 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX For NSK Control Connector B * Order by catalog number. 2-p27 2-p16-27_E2530-2550_1407.qxd 14.8.3 3:43 PM ページ 2-p26 “E2530 / E2550 SERIES” ø1.0", ø0.98"(ø25.4, ø25 mm) SPEED REDUCER Caution : 1 CAT. No. “E2530 / E2550 SERIES” AIR LINE KIT Use the motor at motor speed less than maximum allowable speed or use a speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. AS81826P SPEED REDUCER 1/4 ARG-H2504N CAT. No. 4504 AIR LINE KIT AL-C1204 EmaxEVO Maximum allowable motor speed 1.87" Maximum rotating speed at the cutting tool ROTUS IMPULSE 7,500 min (rpm) iSpeed3 CAT. No. ø0.897" E3000 - Modular ø1.18" ø6 mm the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model Speed Reduction Ratio Outside Diameter AS81826P ARG-H2504N AS81822P ARG-2504N ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) ESPERT ROTUS PRESTO II SHEENUS neo SONIC CUTTER Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 2-ø7mm Speed Reducer of debris while the adjustable regulator provides the correct air pressure for cooling and purging. PF1/4 30,000 min (rpm) E2530 / E2550 E3000 - One Piece R3.5mm ø15mm -1 ø1.0"/ø0.98" The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts IMPULSE Maximum allowable motor speed E2530 / E2550 0.79" (rpm) Price CAT. No. Model 4504 AL-C1204 1.18" 1 4 -1 9.06" 7.48" -1 4.7 2" Reduction Ratio Maximum rotating speed at the cutting tool 0.79" 8.66" 6.69" SHEENUS neo SONIC CUTTER 2 7,500 min (rpm) -1 • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 5.29 oz. D PRESTO II 30,000 min 0.79" ESPERT 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm Speed Reduction Ratio 1/4 E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 3 CAT. No. Maximum allowable motor speed ø0.897" 2.54" Maximum rotating speed at the cutting tool ø1.0" ø0.98" ø1.18" D Reduction Ratio Maximum rotating speed at the cutting tool 1 16 -1 HES510 1,870 min (rpm) 5 1,870 min -1 (rpm) (rpm) CAT. No. the motor speed unchanged. D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model AS81828P ARG-H2516N AS81824P ARG-2516N Outside Diameter Speed Reduction Ratio PARTS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/16 HTS HPS Xpeed 5 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE • • 3 Meter long Interface Cable provides a DB25 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. 7 8 3 Meter long Interface Cable provides a DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. APPLICATION EXAMPLES 25 Pin Interface Cable CAT. No. 15 Pin Interface Cable Price Model DB25M DB25M 2-p26 ø1.18" AIR LINE KIT TECHNICAL DATA INDEX ø1.0" ø0.98" HES810 Price AIR LINE KIT 6 ø0.897" HES510 Speed Reducer the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping MA An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. 4 30,000 min-1(rpm) HTS Xpeed -1 Maximum allowable motor speed HES810 HPS 30,000 min • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 7.23 oz. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 3 Rotary Coupling MA MS E4000 AS81828P SPEED REDUCER 1/16 ARG-H2516N For NSK Control Connector A CAT. No. Price Model DB15M DB15M 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX For NSK Control Connector B * Order by catalog number. 2-p27 2-p28-39_22.8_A_1407.qxd 14.8.3 3:36 PM ページ 2-p28 BRUSHLESS MOTOR & SPINDLE E2530 / E2550 SERIES 1 Modular Type ø0.897" (ø22.8 mm) E2530 / E2550 Series ø0.897"(ø22.8 mm) System Chart 1 Features of E2530 / E2550 Series EmaxEVO EmaxEVO 7.41" ESPERT 0.67" ESPERT 4.39" 3.02" ROTUS Collet CHK-[][] Transmission Clutch Spindle NR-303 PRESTO II SHEENUS neo SONIC CUTTER The connection part " " is "concave" Arbor for Metal Saw KCH-03 2 The connection part " " is "convex" E2530 / E2550 ø0.897" E3000 - One Piece The E2530 / E2550 Series motor is a brushless DC motor utilizing hall elements and rare-earth magnet in the rotor. The Motor develops 125W. • Speed Reducer ARG-01 (1/3.92 Reduction) ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 90º Angle Spindle RA-100 (1 / 2.67 Reduction) E4000 Collet CH8-[][] 3 Speed Reducer ARG-02 (1/15.39 Reduction) Arbor for Metal Saw KCH-02 ø0.897" 90º Angle Spindle RA-200 (1/1.5 Reduction) ø1.0" ø0.98" ø1.18" Collet CHS-[][] Brushless Motor (Cord with Quick Disconnect) EM25-5000-J4 4 Collet Nut K-265 • required for increased torque. 5 Arbor for Metal Saw KCH-03 The E2530 / E2550 Series is equipped with a protective function to stop the spindle rotation automatically in case of overload ensuring safe and smooth operation. When the protective circuit is activated, an error code is shown on the digital display. In case of an air supply failure, the protective circuit limits the motor/spindle to 30,000 min-1(rpm) (E2530) / 25,000 min-1(rpm) (E2550) maximum. Spindle NR-311 Grindstone Flange NGF2-19 Collet CHM-[][] Grindstone Arbor AGM-01 • Slim Neck Spindle AMH-301 AIR LINE KIT 6 E2530 115V 230V PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES Air-cooled motor uses a small volume of air (1.2CFM) to prevent heat buildup and allow long continuous operation. Regulate the cooling air supply between 21-35PSI. If the air pressure is too low the control will limit the maximum motor speed to 30,000 min-1(rpm) for safety. • Safe Protective Function HPS Xpeed Air-Cooling system provides Excellent Durability Straight-type spindle is available along with speed reducers to increase torque as well as 90° degree spindles to provide outstanding system flexibility. HES810 HTS The brushless DC Motor designs allows for excellent reliability and durability. The brushless DC Motor can be steplessly controlled up to 30,000 / 50,000 min-1(rpm). Control Unit NE236 Centering Mode Switch This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. E2550 not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. 115V 230V Control Unit NE145 NE145-OP1 • (No Simultaneous Operation) Up to 2 motors may be connected to 1 control unit and operated sequentially making this system very easy to use when multiple live tools are required. Compact Vertical Control Unit The compact, vertical design of the control unit makes it extremely easy to mount in cramped control cabinets. • Dual Voltage Power Source AC 115V/230V The control unit is compatible with 115-230V main supply voltage and is equipped with a switch for voltage selection. The power supply cord is packaged for your ordered voltage specifications. Fuses and power must be exchanged to compatible component when changing supply voltage. Verify that voltage selection, power cord and fuse type are compatible with supply voltage prior to connecting to power supply. • Stainless Steel Outside Body The housings of the motor and spindle are made from precision ground (SUS416). • Special Safety Version Available (NE145) The safety relay utilizes normally open contacts. The emergency stop signal lines must be supplied with power to hold the safety relay contacts closed and allow the control unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the E2550 Series control unit and the machining center's controller will cause the relay contacts to open and the E2550 Series motor or stop. E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 Spindle Motor Motor Cord Air 7 E2550 Series •Sequential Operation of up to 2 Motor / Spindles Air *Clean dry air is required. INDEX SHEENUS neo SONIC CUTTER PARTS •Single Motor Spindle Operation Air Line Kit AL-C1204 The operating parameters can be preset for : *Fixed Motor Speed *Maximum Motor Speed *Operating without Air Automatic Control System Chart E2530 Series Compressor PRESTO II 2 • Operating Parameters • IMPULSE iSpeed3 2 Motors can be connected (NE145) Variety of Interchangeable Attachments • Wide are Available Collet CHK-[][] HES510 Brushless Motor Clean dry air is required to cool the motor and protect the spindle from contaminants. Use a filter and regulator. (Proper air pressure 21~35PSI) (Use Air Line Kit AL-C1204) be connected between *May the motor and the spindle as MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" NR-303 + EM25-5000-J4 • Maximum Output 125W 90º Angle Spindle RAS-101 (1 / 2.67 Reduction) E3000 - Modular MA 1.38" Recommended Clamping Area E2530 / E2550 Grindstone Arbor AGM-03 0.85" Spindle NR-2351 iSpeed3 ø1.0"/ø0.98" ø0.63" Collet Nut K-265 ø22.8 -00.01 mm (ø0.897") IMPULSE 0 ø25-0.01 mm (ø0.98") ROTUS NE236 Control Unit •ON/OFF •R/L Compressor Spindle NR-2551 8 Motor EM25N-5000-J4 NE145 Control Unit Sequence Spindle NR-2551 TECHNICAL DATA APPLICATION EXAMPLES Sequence INDEX Motor EM25N-5000-J4 The E2550 Series control unit has the ability to control up to 2 *motors sequentially. 2 motors can not be run simultaneously. 2-p28 2-p29 2-p28-39_22.8_A_1407.qxd 14.8.3 3:36 PM ページ 2-p28 BRUSHLESS MOTOR & SPINDLE E2530 / E2550 SERIES 1 Modular Type ø0.897" (ø22.8 mm) E2530 / E2550 Series ø0.897"(ø22.8 mm) System Chart 1 Features of E2530 / E2550 Series EmaxEVO EmaxEVO 7.41" ESPERT 0.67" ESPERT 4.39" 3.02" ROTUS Collet CHK-[][] Transmission Clutch Spindle NR-303 PRESTO II SHEENUS neo SONIC CUTTER The connection part " " is "concave" Arbor for Metal Saw KCH-03 2 The connection part " " is "convex" E2530 / E2550 ø0.897" E3000 - One Piece The E2530 / E2550 Series motor is a brushless DC motor utilizing hall elements and rare-earth magnet in the rotor. The Motor develops 125W. • Speed Reducer ARG-01 (1/3.92 Reduction) ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 90º Angle Spindle RA-100 (1 / 2.67 Reduction) E4000 Collet CH8-[][] 3 Speed Reducer ARG-02 (1/15.39 Reduction) Arbor for Metal Saw KCH-02 ø0.897" 90º Angle Spindle RA-200 (1/1.5 Reduction) ø1.0" ø0.98" ø1.18" Collet CHS-[][] Brushless Motor (Cord with Quick Disconnect) EM25-5000-J4 4 Collet Nut K-265 • required for increased torque. 5 Arbor for Metal Saw KCH-03 The E2530 / E2550 Series is equipped with a protective function to stop the spindle rotation automatically in case of overload ensuring safe and smooth operation. When the protective circuit is activated, an error code is shown on the digital display. In case of an air supply failure, the protective circuit limits the motor/spindle to 30,000 min-1(rpm) (E2530) / 25,000 min-1(rpm) (E2550) maximum. Spindle NR-311 Grindstone Flange NGF2-19 Collet CHM-[][] Grindstone Arbor AGM-01 • Slim Neck Spindle AMH-301 AIR LINE KIT 6 E2530 115V 230V PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES Air-cooled motor uses a small volume of air (1.2CFM) to prevent heat buildup and allow long continuous operation. Regulate the cooling air supply between 21-35PSI. If the air pressure is too low the control will limit the maximum motor speed to 30,000 min-1(rpm) for safety. • Safe Protective Function HPS Xpeed Air-Cooling system provides Excellent Durability Straight-type spindle is available along with speed reducers to increase torque as well as 90° degree spindles to provide outstanding system flexibility. HES810 HTS The brushless DC Motor designs allows for excellent reliability and durability. The brushless DC Motor can be steplessly controlled up to 30,000 / 50,000 min-1(rpm). Control Unit NE236 Centering Mode Switch This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. E2550 not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. 115V 230V Control Unit NE145 NE145-OP1 • (No Simultaneous Operation) Up to 2 motors may be connected to 1 control unit and operated sequentially making this system very easy to use when multiple live tools are required. Compact Vertical Control Unit The compact, vertical design of the control unit makes it extremely easy to mount in cramped control cabinets. • Dual Voltage Power Source AC 115V/230V The control unit is compatible with 115-230V main supply voltage and is equipped with a switch for voltage selection. The power supply cord is packaged for your ordered voltage specifications. Fuses and power must be exchanged to compatible component when changing supply voltage. Verify that voltage selection, power cord and fuse type are compatible with supply voltage prior to connecting to power supply. • Stainless Steel Outside Body The housings of the motor and spindle are made from precision ground (SUS416). • Special Safety Version Available (NE145) The safety relay utilizes normally open contacts. The emergency stop signal lines must be supplied with power to hold the safety relay contacts closed and allow the control unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the E2550 Series control unit and the machining center's controller will cause the relay contacts to open and the E2550 Series motor or stop. E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 Spindle Motor Motor Cord Air 7 E2550 Series •Sequential Operation of up to 2 Motor / Spindles Air *Clean dry air is required. INDEX SHEENUS neo SONIC CUTTER PARTS •Single Motor Spindle Operation Air Line Kit AL-C1204 The operating parameters can be preset for : *Fixed Motor Speed *Maximum Motor Speed *Operating without Air Automatic Control System Chart E2530 Series Compressor PRESTO II 2 • Operating Parameters • IMPULSE iSpeed3 2 Motors can be connected (NE145) Variety of Interchangeable Attachments • Wide are Available Collet CHK-[][] HES510 Brushless Motor Clean dry air is required to cool the motor and protect the spindle from contaminants. Use a filter and regulator. (Proper air pressure 21~35PSI) (Use Air Line Kit AL-C1204) be connected between *May the motor and the spindle as MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" NR-303 + EM25-5000-J4 • Maximum Output 125W 90º Angle Spindle RAS-101 (1 / 2.67 Reduction) E3000 - Modular MA 1.38" Recommended Clamping Area E2530 / E2550 Grindstone Arbor AGM-03 0.85" Spindle NR-2351 iSpeed3 ø1.0"/ø0.98" ø0.63" Collet Nut K-265 ø22.8 -00.01 mm (ø0.897") IMPULSE 0 ø25-0.01 mm (ø0.98") ROTUS NE236 Control Unit •ON/OFF •R/L Compressor Spindle NR-2551 8 Motor EM25N-5000-J4 NE145 Control Unit Sequence Spindle NR-2551 TECHNICAL DATA APPLICATION EXAMPLES Sequence INDEX Motor EM25N-5000-J4 The E2550 Series control unit has the ability to control up to 2 *motors sequentially. 2 motors can not be run simultaneously. 2-p28 2-p29 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p30 “E2530 SERIES” COMBINATION EXAMPLE “E2530 SERIES” CONTROL UNIT min (rpm) • 5,000~30,000 Max. Output brushless DC Motor with an outside diameter of ø0.897"(ø22.8 mm) • External Input(125W) / Output Control Signal • -1 (Refer to 7-p10~p13 page of this catalog) ESPERT • ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) • • • 8602 CAT. No. High Precision and High-Performance Control Unit E2530 CONTROL UNIT NE236 30,000 min-1(rpm) ESPERT Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD [1] Load LED (LOAD)* * : Load LED load area • :: Continuous Intermittent load area • : Overload • [2] Error LED (ERROR) ROTUS [3] Error Reset Switch (RESET) IMPULSE [4] Centering Switch {500 min-1(rpm)} PRESTO II [5] Control Switch (AUTO/MANUAL) [6] Rotating Direction Selector Switch (FWD./REV.) [7] Start Switch (START) [8] Warning LED (WARNING) Motor Connector LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. [10] Rotating Speed Display (SPEED) iSpeed3 [11] Speed Control Potentiometer E2530 / E2550 ø1.0"/ø0.98" [8] [9] [10] Cooling Air Output Joint Air Input Joint E3000 - Modular [11] ø1.18" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" E2530 Series Combination Example 30,000 min-1(rpm) Power Source Power Consumption Weight Dimensions ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 Motor Spindle NE236 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25-5000-J4 NR-303 5,000~30,000 min-1(rpm) * 500 min-1(rpm) : for centering 1 lb. 0.40 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions APPLICATION EXAMPLES INDEX 2-p30 E3000 - Modular ø1.18" E3000 - 80,000rpm Power Fuse [1] Product 8602 AS88322 AS41830 4504 NE236 EM25-5000-J4 NR-303 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit MA Power Switch ø0.897" Specifications Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Intake CAT. No. Plug Type Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Price Model 3 [7] E2530 Control Unit E2530, NR-303 Combination Example CAT. No. [2] [3] [4] [5] [6] Total (rpm) with the NE236 Control Unit * Maximum Speed 30,000 min-1(rpm) with Air & 25,000 min-1(rpm) without Air. 8602 115V (B type) NE236 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HES810 HTS HPS *Please refer to Technical Data 7-p10~p13 in detail about External Input-Output Connector. *Please check the power source plug type and order accordingly. • Power Source Plug Plug Type Main Usable Area Interface Cable Page 2-p38 Xpeed 5 AIR LINE KIT Product Plug Type Main Usable Area Product 6 PARTS For 100V (A type) For Japan For 200V (C type) Without Plug TECHNICAL DATA 8 ø0.897" E3000 - One Piece ø1.0"/ø0.98" ø0.897" External Input-Output Connector A, B Motor & Spindle MS E2530 / E2550 E4000 Unit Specifications Model SHEENUS neo SONIC CUTTER 2 [9] Running LED (RUN) Motor Speed Display Motor speed is displayed precisely and digitally. E3000 - One Piece ø1.0"/ø0.98" ø0.897" 1 EmaxEVO External Input-Output Connector (Refer to Technical Data 7-p10~p13 in detail) •••••• 1 EmaxEVO 7 TECHNICAL DATA For 115V (B type) For U.S.A. and Canada For 230V (D type) For Europe 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 2-p31 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p30 “E2530 SERIES” COMBINATION EXAMPLE “E2530 SERIES” CONTROL UNIT min (rpm) • 5,000~30,000 Max. Output brushless DC Motor with an outside diameter of ø0.897"(ø22.8 mm) • External Input(125W) / Output Control Signal • -1 (Refer to 7-p10~p13 page of this catalog) ESPERT • ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) • • • 8602 CAT. No. High Precision and High-Performance Control Unit E2530 CONTROL UNIT NE236 30,000 min-1(rpm) ESPERT Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD [1] Load LED (LOAD)* * : Load LED load area • :: Continuous Intermittent load area • : Overload • [2] Error LED (ERROR) ROTUS [3] Error Reset Switch (RESET) IMPULSE [4] Centering Switch {500 min-1(rpm)} PRESTO II [5] Control Switch (AUTO/MANUAL) [6] Rotating Direction Selector Switch (FWD./REV.) [7] Start Switch (START) [8] Warning LED (WARNING) Motor Connector LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. [10] Rotating Speed Display (SPEED) iSpeed3 [11] Speed Control Potentiometer E2530 / E2550 ø1.0"/ø0.98" [8] [9] [10] Cooling Air Output Joint Air Input Joint E3000 - Modular [11] ø1.18" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" E2530 Series Combination Example 30,000 min-1(rpm) Power Source Power Consumption Weight Dimensions ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 Motor Spindle NE236 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25-5000-J4 NR-303 5,000~30,000 min-1(rpm) * 500 min-1(rpm) : for centering 1 lb. 0.40 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions APPLICATION EXAMPLES INDEX 2-p30 E3000 - Modular ø1.18" E3000 - 80,000rpm Power Fuse [1] Product 8602 AS88322 AS41830 4504 NE236 EM25-5000-J4 NR-303 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit MA Power Switch ø0.897" Specifications Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Intake CAT. No. Plug Type Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Price Model 3 [7] E2530 Control Unit E2530, NR-303 Combination Example CAT. No. [2] [3] [4] [5] [6] Total (rpm) with the NE236 Control Unit * Maximum Speed 30,000 min-1(rpm) with Air & 25,000 min-1(rpm) without Air. 8602 115V (B type) NE236 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HES810 HTS HPS *Please refer to Technical Data 7-p10~p13 in detail about External Input-Output Connector. *Please check the power source plug type and order accordingly. • Power Source Plug Plug Type Main Usable Area Interface Cable Page 2-p38 Xpeed 5 AIR LINE KIT Product Plug Type Main Usable Area Product 6 PARTS For 100V (A type) For Japan For 200V (C type) Without Plug TECHNICAL DATA 8 ø0.897" E3000 - One Piece ø1.0"/ø0.98" ø0.897" External Input-Output Connector A, B Motor & Spindle MS E2530 / E2550 E4000 Unit Specifications Model SHEENUS neo SONIC CUTTER 2 [9] Running LED (RUN) Motor Speed Display Motor speed is displayed precisely and digitally. E3000 - One Piece ø1.0"/ø0.98" ø0.897" 1 EmaxEVO External Input-Output Connector (Refer to Technical Data 7-p10~p13 in detail) •••••• 1 EmaxEVO 7 TECHNICAL DATA For 115V (B type) For U.S.A. and Canada For 230V (D type) For Europe 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 2-p31 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p32 “E2550 SERIES” COMBINATION EXAMPLE “E2550 SERIES” CONTROL UNIT min (rpm) • 5,000~50,000 Maximum Output 125W • 2 motors can be connected (No Simultaneous Operation). • External Input / Output Control Signal • -1 (Refer to 7-p14~p17 page of this catalog) EmaxEVO ESPERT • ROTUS IMPULSE PRESTO II • SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) Selector Function Max. 2 motor can be controlled sequentially. 2 motors can not be run simultaneously. • • • External Input-Output Connector (Refer to Technical Data 7-p14~p17 in detail) Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 • • • Xpeed 5 AIR LINE KIT 6 PARTS [5] Control Switch (AUTO/MANUAL) PRESTO II [6] Motor Selector Switch (MOTOR1/MOTOR2) SHEENUS neo SONIC CUTTER [7] Rotating Direction Selector Switch (FWD./REV.) 2 [9] Warning LED (WARNING) [10] Running LED (RUN) iSpeed3 [11] Rotating Speed Display (SPEED) Cooling Air Output Joint ( For motor #1, #2 ) E2530 / E2550 ø1.0"/ø0.98" [12] Speed Control Potentiometer [9] [10] [11] 50,000 min-1(rpm) Power Source Power Consumption Weight Dimensions NE145 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25-5000-J4 NR-2351 5,000~50,000 min-1(rpm) 500 min-1(rpm) : for centering 1 lb. 0.40 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions E3000 - Modular Power Fuse E4000 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm [1] Power Switch 3 [2] [3] [4] [5] [6] [7] [8] MA ø0.897" Specifications Intake Model : NE145 / NE145-OP1 Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Motor & Spindle Motor Spindle ø0.897" E3000 - One Piece ø1.18" Unit Specifications Model E2530 / E2550 External Input-Output Connector A, B E2550 Control Unit CAT. No. Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 AS88323 NE145 AS88324 NE145-OP1 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HTS HPS IMPULSE [4] Centering Switch {500 min (rpm)} -1 [12] MA ø0.897" ROTUS [3] Error Reset Switch (RESET) * : Load LED : Continuous load area : Intermittent load area : Overload Air Input Joint E2550 Series Combination Example 1 ESPERT [2] Error LED (ERROR) Motor Connector #1, #2 ø1.0"/ø0.98" ø0.897" 3 [1] Load LED (LOAD)* [8] Start Switch (START) Motor Speed Display Motor speed is displayed precisely and digitally. ø1.18" E4000 50,000 min-1(rpm) EmaxEVO E3000 - Modular E3000 - 80,000rpm AS88323 E2550 CONTROL UNIT NE145 CAT. No. High Precision and High-Performance Control Unit •••••• 1 E2550, NR-2351 Combination Example HES810 HTS HPS Price CAT. No. Model Product AS88323 AS88322 AS18220 4504 NE145 EM25-5000-J4 NR-2351 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit Total *Please refer to Technical Data 7-p14~p17 in detail about External Input-Output Connector. *The NE145-OP1 is a Special Safety Version that features an "Emergency Stop Input" and "Safety Relay". Please contact us regarding delivery. Interface Cable Page 2-p38 Xpeed 5 AIR LINE KIT • Mounting Bracket 6 Back Mounting Bottom Mounting PARTS 6.14" 4.25" 2.68" 0.39" 7 6.14" 6.89" 0.79" TECHNICAL DATA 8.11" 7.62" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4.25" 2.68" 0.98" INDEX 2-p32 0.98" 0.98" 6.89" 8.07" 8.66" 8 APPLICATION EXAMPLES 0.39" 7 * Order by catalog number. 2-p33 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p32 “E2550 SERIES” COMBINATION EXAMPLE “E2550 SERIES” CONTROL UNIT min (rpm) • 5,000~50,000 Maximum Output 125W • 2 motors can be connected (No Simultaneous Operation). • External Input / Output Control Signal • -1 (Refer to 7-p14~p17 page of this catalog) EmaxEVO ESPERT • ROTUS IMPULSE PRESTO II • SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece • High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. Warning/Error Function Motor/Spindle is stopped safely when, Warning/Error LED is lit, and Warning/Error Signal is output to external when there is something wrong with the motor/spindle, or any breakage is detected. Warning : • Air shortage • Overload operation • Motor cord disconnection and etc. Error : • Internal Circuit Error • Voltage/Electric currency Error • Overheat/Overload operation • Operation Error • Air shortage • Locked Motor and others (Total 13 items) Selector Function Max. 2 motor can be controlled sequentially. 2 motors can not be run simultaneously. • • • External Input-Output Connector (Refer to Technical Data 7-p14~p17 in detail) Motor/Spindle can be controlled and monitored by external input-output connector. Control : Start/Stop, Motor Speed Control, FWD./REV. Rotation and etc. Monitor : While Rotating, Rotation Pulse, Unit Power Source Detection, AUTO Mode, Motor Speed Voltage and etc. And Error Output can be reversed by the parameter setting. LOAD LOAD Monitor LED Motor load is displayed by 6 LED’s to indicate load level. ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 • • • Xpeed 5 AIR LINE KIT 6 PARTS [5] Control Switch (AUTO/MANUAL) PRESTO II [6] Motor Selector Switch (MOTOR1/MOTOR2) SHEENUS neo SONIC CUTTER [7] Rotating Direction Selector Switch (FWD./REV.) 2 [9] Warning LED (WARNING) [10] Running LED (RUN) iSpeed3 [11] Rotating Speed Display (SPEED) Cooling Air Output Joint ( For motor #1, #2 ) E2530 / E2550 ø1.0"/ø0.98" [12] Speed Control Potentiometer [9] [10] [11] 50,000 min-1(rpm) Power Source Power Consumption Weight Dimensions NE145 AC 115V/230V Single-Phase (Switchable type) 50-60 H z 92W 7 lb. 14.99 oz. W4.25" x D6.14" x H6.89" EM25-5000-J4 NR-2351 5,000~50,000 min-1(rpm) 500 min-1(rpm) : for centering 1 lb. 0.40 oz. (w/o motor cable) ø0.98" x 7.41" Speed Weight Dimensions E3000 - Modular Power Fuse E4000 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm [1] Power Switch 3 [2] [3] [4] [5] [6] [7] [8] MA ø0.897" Specifications Intake Model : NE145 / NE145-OP1 Power Source : AC 115V/230V, 50-60 Hz Single-Phase (switchable type) Power Consumption : 92W : 7 lb. 14.99 oz. Weight : W4.25" x D6.14" x H6.89" Dimensions Motor & Spindle Motor Spindle ø0.897" E3000 - One Piece ø1.18" Unit Specifications Model E2530 / E2550 External Input-Output Connector A, B E2550 Control Unit CAT. No. Standard Equipment · Accessories Model Price ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 AS88323 NE145 AS88324 NE145-OP1 • Power Cord • Air Hose with filter (K-251) : ø6 mm x 6 ft • Bracket (2 pcs.) • Connector Cap • Power Cord Grip • Air Plug • Screw (7 pcs.) HTS HPS IMPULSE [4] Centering Switch {500 min (rpm)} -1 [12] MA ø0.897" ROTUS [3] Error Reset Switch (RESET) * : Load LED : Continuous load area : Intermittent load area : Overload Air Input Joint E2550 Series Combination Example 1 ESPERT [2] Error LED (ERROR) Motor Connector #1, #2 ø1.0"/ø0.98" ø0.897" 3 [1] Load LED (LOAD)* [8] Start Switch (START) Motor Speed Display Motor speed is displayed precisely and digitally. ø1.18" E4000 50,000 min-1(rpm) EmaxEVO E3000 - Modular E3000 - 80,000rpm AS88323 E2550 CONTROL UNIT NE145 CAT. No. High Precision and High-Performance Control Unit •••••• 1 E2550, NR-2351 Combination Example HES810 HTS HPS Price CAT. No. Model Product AS88323 AS88322 AS18220 4504 NE145 EM25-5000-J4 NR-2351 AL-C1204 Control Unit Brushless Motor Spindle Air Line Kit Total *Please refer to Technical Data 7-p14~p17 in detail about External Input-Output Connector. *The NE145-OP1 is a Special Safety Version that features an "Emergency Stop Input" and "Safety Relay". Please contact us regarding delivery. Interface Cable Page 2-p38 Xpeed 5 AIR LINE KIT • Mounting Bracket 6 Back Mounting Bottom Mounting PARTS 6.14" 4.25" 2.68" 0.39" 7 6.14" 6.89" 0.79" TECHNICAL DATA 8.11" 7.62" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4.25" 2.68" 0.98" INDEX 2-p32 0.98" 0.98" 6.89" 8.07" 8.66" 8 APPLICATION EXAMPLES 0.39" 7 * Order by catalog number. 2-p33 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p34 “E2530 / E2550 SERIES” ø0.98"(ø25 mm) BRUSHLESS MOTOR EM 25 5000 J4 Product Symbol Outside Diameter Max. Motor Speed Cord Variety “E2530 / E2550 SERIES” ø0.897"(ø22.8 mm) SPINDLE Clutch COOLANT New Model Name for E2530 / E2550 Series Motor 1 EmaxEVO E2530 / E2550 Series can be used in conjunction with water or oil based coolants. *Do not exceed the allowable motor speed for the spindle. CAT. No. AS88322 BRUSHLESS MOTOR EM25-5000-J4 (Cord with Quick Disconnect) CAT. No. 50,000 min-1(rpm) AS41830 SPINDLE NR-303 ESPERT ROTUS • Allowable Motor Speed ............................... 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. 4.39" IMPULSE 1' ø0.63" SHEENUS neo SONIC CUTTER ø22.8 -00.01 mm (ø0.897") (1.97") Max. Tool Mounting Depth 0.67" 3.02" 0 ø25-0.01 mm (ø0.98") PRESTO II 12.1' 2 iSpeed3 0.85" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 • Motor Speed ....................................... 5,000~50,000 min-1(rpm) • Max. Output Power ....................................................... 125W • Housing ............................................. Stainless steel (SUS416) • Cord .................................................................. Length 13 ft • Air Coolant Hose .................................................. Length 13 ft • Weight ......................................................... 8.82 oz. (w/o Cord) * 3 MA ø0.897" ø1.0" ø0.98" 1.38" • CAT. No. Model EM25AS88322 5000-J4 Outside Diameter Standard Equipment · Accessories • Cord with Quick Disconnect • Air Coolant Hose (ø25 mm) • Reducer • Wrench (22 x 27) : 1 pc. CAT. No. • This spindle is ideal for small diameter drilling, milling and grinding. A wide selection of collets and accessories is available. * There is not an outside diameter ø1.0"(ø25.4 mm) dimension. Intermittent Duty Area 3 2 HES810 1 60 40 Torque 0.87" 20 Continuous Duty Area 1.38" 10 20 30 40 6 ø1.0"/ø0.98" ø0.897" 50,000 min (rpm) -1 MA ø0.897" < Optional > • Collet (CHK-[][]) ..................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS 50 HPS Spindle Speed { x 103 min-1(rpm) } Xpeed PARTS ø1.18" 0 0 AIR LINE KIT AS41830 NR-303 E3000 - One Piece E3000 - Modular • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. • Allowable Motor Speed ............................... 50,000 min (rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. Recommended Clamping Area HTS 5 Price Standard Equipment · Accessories AS18220 SPINDLE NR-2351 (Ceramic Bearings) ø0.63" 80 2 iSpeed3 3 CAT. No. (1.97") Max. Tool Mounting Depth 0.67" 3.02" Output (W) . Torque SHEENUS neo SONIC CUTTER E4000 100 5 4 PRESTO II E3000 - 80,000rpm ø22.8 -00.01 mm (ø0.897") 120 HES510 HPS Model ø0.98" Output Torque (cN m) 4 6 IMPULSE ø0.897" Spindle -1 140 ROTUS ø1.0"/ø0.98" Price Torque Characteristics of EM25-5000-J4 7 ESPERT E2530 / E2550 Use the Brushless Motor EM25-5000-J4 for the spindles and the reducers in this section. MS 1 EmaxEVO E2530 / E2550 Brushless Motor ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm Recommended Clamping Area ø1.0"/ø0.98" E2530 / E2550 30,000 min-1(rpm) CAT. No. spindle is ideal for ultra-precision, small diameter drilling, •This milling and grinding. A wide selection of collets and accessories is available. Model AS18220 NR-2351 Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. Price Xpeed 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p34 * Order by catalog number. 2-p35 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p34 “E2530 / E2550 SERIES” ø0.98"(ø25 mm) BRUSHLESS MOTOR EM 25 5000 J4 Product Symbol Outside Diameter Max. Motor Speed Cord Variety “E2530 / E2550 SERIES” ø0.897"(ø22.8 mm) SPINDLE Clutch COOLANT New Model Name for E2530 / E2550 Series Motor 1 EmaxEVO E2530 / E2550 Series can be used in conjunction with water or oil based coolants. *Do not exceed the allowable motor speed for the spindle. CAT. No. AS88322 BRUSHLESS MOTOR EM25-5000-J4 (Cord with Quick Disconnect) CAT. No. 50,000 min-1(rpm) AS41830 SPINDLE NR-303 ESPERT ROTUS • Allowable Motor Speed ............................... 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. 4.39" IMPULSE 1' ø0.63" SHEENUS neo SONIC CUTTER ø22.8 -00.01 mm (ø0.897") (1.97") Max. Tool Mounting Depth 0.67" 3.02" 0 ø25-0.01 mm (ø0.98") PRESTO II 12.1' 2 iSpeed3 0.85" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 • Motor Speed ....................................... 5,000~50,000 min-1(rpm) • Max. Output Power ....................................................... 125W • Housing ............................................. Stainless steel (SUS416) • Cord .................................................................. Length 13 ft • Air Coolant Hose .................................................. Length 13 ft • Weight ......................................................... 8.82 oz. (w/o Cord) * 3 MA ø0.897" ø1.0" ø0.98" 1.38" • CAT. No. Model EM25AS88322 5000-J4 Outside Diameter Standard Equipment · Accessories • Cord with Quick Disconnect • Air Coolant Hose (ø25 mm) • Reducer • Wrench (22 x 27) : 1 pc. CAT. No. • This spindle is ideal for small diameter drilling, milling and grinding. A wide selection of collets and accessories is available. * There is not an outside diameter ø1.0"(ø25.4 mm) dimension. Intermittent Duty Area 3 2 HES810 1 60 40 Torque 0.87" 20 Continuous Duty Area 1.38" 10 20 30 40 6 ø1.0"/ø0.98" ø0.897" 50,000 min (rpm) -1 MA ø0.897" < Optional > • Collet (CHK-[][]) ..................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS 50 HPS Spindle Speed { x 103 min-1(rpm) } Xpeed PARTS ø1.18" 0 0 AIR LINE KIT AS41830 NR-303 E3000 - One Piece E3000 - Modular • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. • Allowable Motor Speed ............................... 50,000 min (rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. Recommended Clamping Area HTS 5 Price Standard Equipment · Accessories AS18220 SPINDLE NR-2351 (Ceramic Bearings) ø0.63" 80 2 iSpeed3 3 CAT. No. (1.97") Max. Tool Mounting Depth 0.67" 3.02" Output (W) . Torque SHEENUS neo SONIC CUTTER E4000 100 5 4 PRESTO II E3000 - 80,000rpm ø22.8 -00.01 mm (ø0.897") 120 HES510 HPS Model ø0.98" Output Torque (cN m) 4 6 IMPULSE ø0.897" Spindle -1 140 ROTUS ø1.0"/ø0.98" Price Torque Characteristics of EM25-5000-J4 7 ESPERT E2530 / E2550 Use the Brushless Motor EM25-5000-J4 for the spindles and the reducers in this section. MS 1 EmaxEVO E2530 / E2550 Brushless Motor ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm Recommended Clamping Area ø1.0"/ø0.98" E2530 / E2550 30,000 min-1(rpm) CAT. No. spindle is ideal for ultra-precision, small diameter drilling, •This milling and grinding. A wide selection of collets and accessories is available. Model AS18220 NR-2351 Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. Price Xpeed 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p34 * Order by catalog number. 2-p35 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p36 “E2530 / E2550 SERIES” ø0.897"(ø22.8 mm) SPINDLE Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT COOLANT *Do not exceed the allowable motor speed for the spindle. AS51094 90° ANGLE SPINDLE RAS-101 PRESTO II SHEENUS neo SONIC CUTTER 0.80" 1.10" Recommended Clamping Area 2 Maximum rotating speed at the cutting tool 7,490 min-1(rpm) iSpeed3 Reduction Ratio 1 2.67 E2530 / E2550 ø1.0"/ø0.98" Maximum allowable motor speed for the spindle E2530 / E2550 ø0.897" 20,000 min-1(rpm) E3000 - One Piece Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 ø22.8 mm (ø0.897") 0 -0.01 E3000 - Modular E3000 - 80,000rpm (rpm) < Optional > • Collet (CHK-[][]) ..................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03).......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel I.D. of ø5 mm CAT. No. Model • 90˚Angle type spindle with wide chucking range up to ø1/4"(ø6.35 mm) is suitable for installations where space restrictions exist. AS51094 RAS-101 • Allowable Motor Speed .............................. 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 13.50 oz. (1.97") Max. Tool Mounting Depth (0.89") 3.43" (2.18") 0.49" 0.20" 1.25" 1.22" 0.96" Recommended Clamping Area Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. < Optional > • Collet (CHK-[][]) ..................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Flange (NGF2-19) ... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm sides. This spindle is suitable for grinding of deep hole, grinding by ø1.57" (40 mm) grindstone and small-diameter end milling. 1 2.67 Maximum rotating speed at the cutting tool ø0.35" 7,490 min-1(rpm) 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" CAT. No. Model AS42511 NR-311 Standard Equipment · Accessories Price ø0.897" E3000 - One Piece • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. E3000 - Modular ø1.18" Recommended Clamping Area ø0.31" 30,000 min-1(rpm) 7,490 min -1 Reduction Ratio 1 1.5 • Allowable Motor Speed .............................. 30,000 min-1(rpm) • Standard Size Collet (CHM-3.175) ................................. ø1/8" • Weight .................................................................. 6.03 oz. (rpm) (1.18") Max. Tool Mounting Depth 0.26" 3.29" 1.52" (rpm) • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight .................................................................. 9.56 oz. < Optional > • Collet (CH8-[][]) .................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) 1.65" Maximum allowable motor speed for the spindle 20,000 min-1(rpm) 13,330 min-1(rpm) This spindle can be used for working on corners difficult to work or •unfit for working with straight type, drilling on side face, etc. < Optional > • Collet (CHM-[][]) .................................. ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Grindstone Arbor (AGM-01) ..... For grinding wheel with I.D. of ø5 mm 3 AS11411 RA-100 ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Recommended Clamping Area 90° Angle Spindle Model ø0.897" 4 0.98" HES810 Standard Equipment · Accessories Price • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (20 x 24) : 1 pc. each. HTS Spindle Suitable for the grinding of the inner surface of slender and deep holes. •(Example) If a ø0.55" grindstone is mounted on the grinding arbor AGM-01, this spindle is suitable for the inner grinding of ø0.59" or more and with the depth of 1.57" or less. 1.06" ø0.69" Maximum rotating speed at the cutting tool 2-p36 Maximum rotating speed at the cutting tool CAT. No. 2.70" 0.59" PARTS -1 CAT. No. Model AS11510 AMH-301 Standard Equipment · Accessories • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1), (6 x 4.5), (20 x 24) : 1 pc. each Price HPS Xpeed 5 AIR LINE KIT AS11412 90° ANGLE SPINDLE RA-200 CAT. No. 1.12" 6 20,000 min etc. with the use of ø1.18"(ø30 mm) Metal Saw. (0.26") AIR LINE KIT 20,000 min-1(rpm) spindle is capable of working on corners difficult to work with •This straight type, drilling on side face and, slitting of aluminum, brass, (1.22") Max. Tool Mounting Depth 5 Maximum allowable motor speed for the spindle Maximum allowable motor speed for the spindle 0 ø22.8-0.01 mm (ø0.897") Reduction Ratio HTS Xpeed 2 E2530 / E2550 AS11510 SPINDLE AMH-301 ø0.31" 1.58" 0.79" 0 ø22.8-0.01 mm (ø0.897") Recommended Clamping Area HES810 HPS CAT. No. ø0.51" 1.95" 0 ø22.8-0.01 mm (ø0.897") 4 HES510 SHEENUS neo SONIC CUTTER MA ø0.90" 0.32" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II E3000 - 80,000rpm 3.20" (1.26") Max. Tool Mounting Depth MS IMPULSE ø1.0"/ø0.98" ø0.897" AS11411 90° ANGLE SPINDLE RA-100 MA ø1.18" ROTUS E4000 CAT. No. 3 ø1.0" ø0.98" ESPERT E2530 / E2550 Spindle E4000 ø0.897" 1 iSpeed3 precision angular ball bearings are assembled on the front part •ofLarge the spindle to provide rigidity on both the radial and the thrust 90° Angle Spindle ø1.18" ø1.0"/ø0.98" ø0.897" (rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 11.46 oz. 1.85" IMPULSE 0.55" 0 ø22.8-0.01 mm (ø0.897") ø0.63" ROTUS 30,000 min-1(rpm) EmaxEVO (1.97") Max. Tool Mounting Depth 0.67" 2.95" ESPERT AS42511 SPINDLE NR-311 0 ø22.8-0.01 mm (ø0.897") EmaxEVO CAT. No. 0 ø35-0.01 mm (ø1.38") ø21.4 mm (ø0.84") ø0.63" CAT. No. 1 6 Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) ................................. ø1/8" • Weight .................................................................. 5.82 oz. < Optional > • Collet (CHS-[][]) ................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 90° Angle Spindle CAT. No. Model AS11412 RA-200 Standard Equipment · Accessories Price • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (20 x 24) : 1 pc. each. * Order by catalog number. 2-p37 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p36 “E2530 / E2550 SERIES” ø0.897"(ø22.8 mm) SPINDLE Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT COOLANT *Do not exceed the allowable motor speed for the spindle. AS51094 90° ANGLE SPINDLE RAS-101 PRESTO II SHEENUS neo SONIC CUTTER 0.80" 1.10" Recommended Clamping Area 2 Maximum rotating speed at the cutting tool 7,490 min-1(rpm) iSpeed3 Reduction Ratio 1 2.67 E2530 / E2550 ø1.0"/ø0.98" Maximum allowable motor speed for the spindle E2530 / E2550 ø0.897" 20,000 min-1(rpm) E3000 - One Piece Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 ø22.8 mm (ø0.897") 0 -0.01 E3000 - Modular E3000 - 80,000rpm (rpm) < Optional > • Collet (CHK-[][]) ..................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03).......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel I.D. of ø5 mm CAT. No. Model • 90˚Angle type spindle with wide chucking range up to ø1/4"(ø6.35 mm) is suitable for installations where space restrictions exist. AS51094 RAS-101 • Allowable Motor Speed .............................. 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 13.50 oz. (1.97") Max. Tool Mounting Depth (0.89") 3.43" (2.18") 0.49" 0.20" 1.25" 1.22" 0.96" Recommended Clamping Area Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. < Optional > • Collet (CHK-[][]) ..................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Flange (NGF2-19) ... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm sides. This spindle is suitable for grinding of deep hole, grinding by ø1.57" (40 mm) grindstone and small-diameter end milling. 1 2.67 Maximum rotating speed at the cutting tool ø0.35" 7,490 min-1(rpm) 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" CAT. No. Model AS42511 NR-311 Standard Equipment · Accessories Price ø0.897" E3000 - One Piece • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. E3000 - Modular ø1.18" Recommended Clamping Area ø0.31" 30,000 min-1(rpm) 7,490 min -1 Reduction Ratio 1 1.5 • Allowable Motor Speed .............................. 30,000 min-1(rpm) • Standard Size Collet (CHM-3.175) ................................. ø1/8" • Weight .................................................................. 6.03 oz. (rpm) (1.18") Max. Tool Mounting Depth 0.26" 3.29" 1.52" (rpm) • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight .................................................................. 9.56 oz. < Optional > • Collet (CH8-[][]) .................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) 1.65" Maximum allowable motor speed for the spindle 20,000 min-1(rpm) 13,330 min-1(rpm) This spindle can be used for working on corners difficult to work or •unfit for working with straight type, drilling on side face, etc. < Optional > • Collet (CHM-[][]) .................................. ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Grindstone Arbor (AGM-01) ..... For grinding wheel with I.D. of ø5 mm 3 AS11411 RA-100 ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Recommended Clamping Area 90° Angle Spindle Model ø0.897" 4 0.98" HES810 Standard Equipment · Accessories Price • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (20 x 24) : 1 pc. each. HTS Spindle Suitable for the grinding of the inner surface of slender and deep holes. •(Example) If a ø0.55" grindstone is mounted on the grinding arbor AGM-01, this spindle is suitable for the inner grinding of ø0.59" or more and with the depth of 1.57" or less. 1.06" ø0.69" Maximum rotating speed at the cutting tool 2-p36 Maximum rotating speed at the cutting tool CAT. No. 2.70" 0.59" PARTS -1 CAT. No. Model AS11510 AMH-301 Standard Equipment · Accessories • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1), (6 x 4.5), (20 x 24) : 1 pc. each Price HPS Xpeed 5 AIR LINE KIT AS11412 90° ANGLE SPINDLE RA-200 CAT. No. 1.12" 6 20,000 min etc. with the use of ø1.18"(ø30 mm) Metal Saw. (0.26") AIR LINE KIT 20,000 min-1(rpm) spindle is capable of working on corners difficult to work with •This straight type, drilling on side face and, slitting of aluminum, brass, (1.22") Max. Tool Mounting Depth 5 Maximum allowable motor speed for the spindle Maximum allowable motor speed for the spindle 0 ø22.8-0.01 mm (ø0.897") Reduction Ratio HTS Xpeed 2 E2530 / E2550 AS11510 SPINDLE AMH-301 ø0.31" 1.58" 0.79" 0 ø22.8-0.01 mm (ø0.897") Recommended Clamping Area HES810 HPS CAT. No. ø0.51" 1.95" 0 ø22.8-0.01 mm (ø0.897") 4 HES510 SHEENUS neo SONIC CUTTER MA ø0.90" 0.32" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II E3000 - 80,000rpm 3.20" (1.26") Max. Tool Mounting Depth MS IMPULSE ø1.0"/ø0.98" ø0.897" AS11411 90° ANGLE SPINDLE RA-100 MA ø1.18" ROTUS E4000 CAT. No. 3 ø1.0" ø0.98" ESPERT E2530 / E2550 Spindle E4000 ø0.897" 1 iSpeed3 precision angular ball bearings are assembled on the front part •ofLarge the spindle to provide rigidity on both the radial and the thrust 90° Angle Spindle ø1.18" ø1.0"/ø0.98" ø0.897" (rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 11.46 oz. 1.85" IMPULSE 0.55" 0 ø22.8-0.01 mm (ø0.897") ø0.63" ROTUS 30,000 min-1(rpm) EmaxEVO (1.97") Max. Tool Mounting Depth 0.67" 2.95" ESPERT AS42511 SPINDLE NR-311 0 ø22.8-0.01 mm (ø0.897") EmaxEVO CAT. No. 0 ø35-0.01 mm (ø1.38") ø21.4 mm (ø0.84") ø0.63" CAT. No. 1 6 Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) ................................. ø1/8" • Weight .................................................................. 5.82 oz. < Optional > • Collet (CHS-[][]) ................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 90° Angle Spindle CAT. No. Model AS11412 RA-200 Standard Equipment · Accessories Price • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (20 x 24) : 1 pc. each. * Order by catalog number. 2-p37 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p38 “E2530 / E2550 SERIES” ø0.897"(ø22.8 mm) SPEED REDUCER Caution : 1 CAT. No. “E2530 / E2550 SERIES” AIR LINE KIT Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. AS11414 SPEED REDUCER 1/3.92 ARG-01 CAT. No. 4504 AIR LINE KIT AL-C1204 EmaxEVO Maximum rotating speed at the cutting tool 0 ø22.8-0.01 mm (ø0.897") ROTUS PRESTO II SHEENUS neo SONIC CUTTER 7,650 min-1(rpm) Reduction Ratio 1 3.92 E3000 - Modular of debris while the adjustable regulator provides the correct air pressure for cooling and purging. ø6 mm AS11414 ARG-01 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model Speed Reduction Ratio 1/3.92 4504 AL-C1204 1.18" Price 4.7 2" the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping Speed Reduction Ratio Model ROTUS SHEENUS neo SONIC CUTTER Speed Reducer 1/3.92 CAT. No. ESPERT PRESTO II PF1/4 2-ø7mm ø1.0"/ø0.98" E3000 - One Piece The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts IMPULSE R3.5mm ø15mm 30,000 min-1(rpm) E2530 / E2550 ø0.897" 0.79" (rpm) Maximum allowable motor speed iSpeed3 E2530 / E2550 0.79" 9.06" 7.48" -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 3.81 oz. Maximum rotating speed at the cutting tool 2 7,650 min (rpm) -1 8.66" 6.69" IMPULSE 30,000 min 0.79" Maximum allowable motor speed 1.65" ESPERT 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm the motor speed unchanged. E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 CAT. No. AS11428 SPEED REDUCER 1/15.39 ARG-02 E4000 3 MA Maximum allowable motor speed 2.21" Maximum rotating speed at the cutting tool 0 ø22.8-0.01 mm (ø0.897") ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1,940 min-1(rpm) Reduction Ratio 1 15.39 HPS -1 (rpm) Speed Reducer 1/15.39 MA An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Speed Reduction Ratio Model 3 Rotary Coupling 4 30,000 min-1(rpm) CAT No. HTS 1,940 min (rpm) Maximum allowable motor speed HES510 HES810 -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................. 5.22 oz. Maximum rotating speed at the cutting tool 4 30,000 min Price HES810 • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. AS11428 ARG-02 HTS Speed Reduction Ratio 1/15.39 HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a 7 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. TECHNICAL DATA 8 blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. APPLICATION EXAMPLES INDEX 25 Pin Interface Cable CAT. No. DB25M DB25M 2-p38 15 Pin Interface Cable Price Model For NSK Control Connector A CAT. No. Price Model DB15M DB15M 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX For NSK Control Connector B * Order by catalog number. 2-p39 2-p28-39_22.8_A_1407.qxd 14.8.3 3:37 PM ページ 2-p38 “E2530 / E2550 SERIES” ø0.897"(ø22.8 mm) SPEED REDUCER Caution : 1 CAT. No. “E2530 / E2550 SERIES” AIR LINE KIT Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. AS11414 SPEED REDUCER 1/3.92 ARG-01 CAT. No. 4504 AIR LINE KIT AL-C1204 EmaxEVO Maximum rotating speed at the cutting tool 0 ø22.8-0.01 mm (ø0.897") ROTUS PRESTO II SHEENUS neo SONIC CUTTER 7,650 min-1(rpm) Reduction Ratio 1 3.92 E3000 - Modular of debris while the adjustable regulator provides the correct air pressure for cooling and purging. ø6 mm AS11414 ARG-01 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model Speed Reduction Ratio 1/3.92 4504 AL-C1204 1.18" Price 4.7 2" the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping Speed Reduction Ratio Model ROTUS SHEENUS neo SONIC CUTTER Speed Reducer 1/3.92 CAT. No. ESPERT PRESTO II PF1/4 2-ø7mm ø1.0"/ø0.98" E3000 - One Piece The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts IMPULSE R3.5mm ø15mm 30,000 min-1(rpm) E2530 / E2550 ø0.897" 0.79" (rpm) Maximum allowable motor speed iSpeed3 E2530 / E2550 0.79" 9.06" 7.48" -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 3.81 oz. Maximum rotating speed at the cutting tool 2 7,650 min (rpm) -1 8.66" 6.69" IMPULSE 30,000 min 0.79" Maximum allowable motor speed 1.65" ESPERT 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm the motor speed unchanged. E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 CAT. No. AS11428 SPEED REDUCER 1/15.39 ARG-02 E4000 3 MA Maximum allowable motor speed 2.21" Maximum rotating speed at the cutting tool 0 ø22.8-0.01 mm (ø0.897") ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1,940 min-1(rpm) Reduction Ratio 1 15.39 HPS -1 (rpm) Speed Reducer 1/15.39 MA An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Speed Reduction Ratio Model 3 Rotary Coupling 4 30,000 min-1(rpm) CAT No. HTS 1,940 min (rpm) Maximum allowable motor speed HES510 HES810 -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................. 5.22 oz. Maximum rotating speed at the cutting tool 4 30,000 min Price HES810 • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. AS11428 ARG-02 HTS Speed Reduction Ratio 1/15.39 HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a 7 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. TECHNICAL DATA 8 blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. APPLICATION EXAMPLES INDEX 25 Pin Interface Cable CAT. No. DB25M DB25M 2-p38 15 Pin Interface Cable Price Model For NSK Control Connector A CAT. No. Price Model DB15M DB15M 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX For NSK Control Connector B * Order by catalog number. 2-p39 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:21 PM ページ 2-p40 NC / CNC LATHE & AUTOMATION SOLUTIONS E3000 Series Electric System 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II PRESTO II SHEENUS neo SONIC CUTTER SHEENUS neo SONIC CUTTER 1,000~60,000 min-1(rpm) 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 2 • One Piece Type Outside Diameter ø1.18", ø0.98", ø0.79" (ø30, 25, 20 mm) iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 • Modular Type Outside Diameter ø1.18", ø1.0", ø0.98", ø0.897" (ø30, 25.4, 25, 22.8 mm) E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Xpeed 1,000~80,000 min-1(rpm) • Modular Type Outside Diameter ø1.97", ø1.18" (ø50, 30 mm) 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p40 2-p41 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:21 PM ページ 2-p40 NC / CNC LATHE & AUTOMATION SOLUTIONS E3000 Series Electric System 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II PRESTO II SHEENUS neo SONIC CUTTER SHEENUS neo SONIC CUTTER 1,000~60,000 min-1(rpm) 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 2 • One Piece Type Outside Diameter ø1.18", ø0.98", ø0.79" (ø30, 25, 20 mm) iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 • Modular Type Outside Diameter ø1.18", ø1.0", ø0.98", ø0.897" (ø30, 25.4, 25, 22.8 mm) E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Xpeed 1,000~80,000 min-1(rpm) • Modular Type Outside Diameter ø1.97", ø1.18" (ø50, 30 mm) 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p40 2-p41 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p42 “E3000 SERIES” LINE UP One Piece Type 1 EmaxEVO Modular Type Straight Motor Spindles Max. Speed (rpm) O.D. 90˚Angle Spindles Model Collet EMS-3060K CHK Features Page Max. Speed (rpm) 1 Motors O.D. Model Collet Page RAS-151E CHK 2-p62 Max. Speed (rpm) Page ESPERT ESPERT ROTUS IMPULSE 2-p48 7,490 ROTUS 60,000 IMPULSE EMS-3060A PRESTO II SHEENUS neo SONIC CUTTER for light duty Grinding CHA 2-p48 20,000 ø1.18" 8,000 (ø30mm) EMR-3008K 2-p49 CHK 2 EM30-S6000 iSpeed3 2-p52 CHK 5,000 RAX-271E ø1.18" (ø30mm) 7,490 CHK 2-p62 RAX-71E CHK 2-p62 RA-151E CH8 2-p63 PRESTO II 32,000 EM-3030J 2-p60 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" 60,000 E3000 - One Piece ø0.98" (ø25mm) ø0.79" E3000 - Modular (ø20mm) EM25-S6000 2-p52 CHA E3000 - 80,000rpm E4000 EM20-S6000 Flange Type 7,490 EMSF-3060K ø0.897" (ø22.8mm) 2-p50 CHK 13,330 21,300 ø1.18" EMA-3020K Collet Size : Max. ø6.35mm CHK 2-p54 ø1.97" EMA-3020S Collet Size : Max. ø3.175mm CHSS 2-p54 50,000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 (ø40mm) Modular Type 80,000 PARTS 7 60,000 Model Collet Page Max. Speed (rpm) Page CHA 2-p77 80,000 EM-3080J 2-p76 NR-3080S ø1.18" NR-3060S CHK 2-p61 (ø30mm) 50,000 NR-453E 40,000 TECHNICAL DATA NR-403E ø1.0" (ø25.4mm) 8 APPLICATION EXAMPLES 2-p36 CHS 50,000 ø0.98" (ø25mm) NR-H2551 CHK NR50-5100 ATC CHR 30,000 CHK CHK 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 2-p61 NR40-5100 ATC CHR-RS CHB 2-p64 2-p64 2-p42 E4000 ø0.897" 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 CHK NR-2551 CHK 2-p24 NR-2351 CHK 2-p37 NR-303 CHK 50,000 EM25-5000-J4 2-p35 2-p34 HES810 HTS HPS 60,000 ø1.06" (ø26.8mm) NRR-3060 ø1.06" (ø26.8mm) NRR-2651 60,000 ø1.18" (ø30mm) NRR3060-QC 2-p25 2-p35 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 50,000 EM25-5000-J4 Xpeed CHB 2-p65 CHB 2-p25 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 50,000 EM25N-5000-J4 2-p24 5 AIR LINE KIT 6 PARTS 7 Quick Change Spindle 50,000 EM25N-5000-J4 ø1.18" MS 2-p37 ø0.897" CHM ø1.0" ø0.98" 4 (ø22.8mm) AMH-301 50,000 2-p25 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 2-p64 2-p61 (ø22.8mm) 30,000 ø1.18" 2-p34 MA TECHNICAL DATA CHK CHA 2-p66 INDEX ø0.897" 50,000 EM25-5000-J4 2-p36 Lever Type Spindle AIR LINE KIT 6 CH8 NR-311 Xpeed 5 RA-100 E3000 - Modular 3 Motors HTS HPS E2530 / E2550 Spindle for deep hole grinding Straight Spindles O.D. 2-p36 NR50-5100 ATC RS ø1.57" Max. Speed (rpm) CHK (ø50mm) (ø30mm) MS RAS-101 RA-200 ø0.897" ø1.18" ø1.0"/ø0.98" 2-p63 ATC Spindles 90˚Angle Motor Spindle ø1.0" ø0.98" CHS ø0.897" Straight Motor Spindles (Flange Type) 60,000 RA-271E 2-p53 CHA 3 MA 13,330 E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" SHEENUS neo SONIC CUTTER 2 E2530 / E2550 E2530 / E2550 EmaxEVO 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 80,000 EM-3080J 2-p76 8 APPLICATION EXAMPLES INDEX Air Bearing Spindle (Flange Type) 2-p34 80,000 Flange Type NRAF-5080 CHK 2-p77 2-p43 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p42 “E3000 SERIES” LINE UP One Piece Type 1 EmaxEVO Modular Type Straight Motor Spindles Max. Speed (rpm) O.D. 90˚Angle Spindles Model Collet EMS-3060K CHK Features Page Max. Speed (rpm) 1 Motors O.D. Model Collet Page RAS-151E CHK 2-p62 Max. Speed (rpm) Page ESPERT ESPERT ROTUS IMPULSE 2-p48 7,490 ROTUS 60,000 IMPULSE EMS-3060A PRESTO II SHEENUS neo SONIC CUTTER for light duty Grinding CHA 2-p48 20,000 ø1.18" 8,000 (ø30mm) EMR-3008K 2-p49 CHK 2 EM30-S6000 iSpeed3 2-p52 CHK 5,000 RAX-271E ø1.18" (ø30mm) 7,490 CHK 2-p62 RAX-71E CHK 2-p62 RA-151E CH8 2-p63 PRESTO II 32,000 EM-3030J 2-p60 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" 60,000 E3000 - One Piece ø0.98" (ø25mm) ø0.79" E3000 - Modular (ø20mm) EM25-S6000 2-p52 CHA E3000 - 80,000rpm E4000 EM20-S6000 Flange Type 7,490 EMSF-3060K ø0.897" (ø22.8mm) 2-p50 CHK 13,330 21,300 ø1.18" EMA-3020K Collet Size : Max. ø6.35mm CHK 2-p54 ø1.97" EMA-3020S Collet Size : Max. ø3.175mm CHSS 2-p54 50,000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 (ø40mm) Modular Type 80,000 PARTS 7 60,000 Model Collet Page Max. Speed (rpm) Page CHA 2-p77 80,000 EM-3080J 2-p76 NR-3080S ø1.18" NR-3060S CHK 2-p61 (ø30mm) 50,000 NR-453E 40,000 TECHNICAL DATA NR-403E ø1.0" (ø25.4mm) 8 APPLICATION EXAMPLES 2-p36 CHS 50,000 ø0.98" (ø25mm) NR-H2551 CHK NR50-5100 ATC CHR 30,000 CHK CHK 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 2-p61 NR40-5100 ATC CHR-RS CHB 2-p64 2-p64 2-p42 E4000 ø0.897" 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 CHK NR-2551 CHK 2-p24 NR-2351 CHK 2-p37 NR-303 CHK 50,000 EM25-5000-J4 2-p35 2-p34 HES810 HTS HPS 60,000 ø1.06" (ø26.8mm) NRR-3060 ø1.06" (ø26.8mm) NRR-2651 60,000 ø1.18" (ø30mm) NRR3060-QC 2-p25 2-p35 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 50,000 EM25-5000-J4 Xpeed CHB 2-p65 CHB 2-p25 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 50,000 EM25N-5000-J4 2-p24 5 AIR LINE KIT 6 PARTS 7 Quick Change Spindle 50,000 EM25N-5000-J4 ø1.18" MS 2-p37 ø0.897" CHM ø1.0" ø0.98" 4 (ø22.8mm) AMH-301 50,000 2-p25 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 2-p64 2-p61 (ø22.8mm) 30,000 ø1.18" 2-p34 MA TECHNICAL DATA CHK CHA 2-p66 INDEX ø0.897" 50,000 EM25-5000-J4 2-p36 Lever Type Spindle AIR LINE KIT 6 CH8 NR-311 Xpeed 5 RA-100 E3000 - Modular 3 Motors HTS HPS E2530 / E2550 Spindle for deep hole grinding Straight Spindles O.D. 2-p36 NR50-5100 ATC RS ø1.57" Max. Speed (rpm) CHK (ø50mm) (ø30mm) MS RAS-101 RA-200 ø0.897" ø1.18" ø1.0"/ø0.98" 2-p63 ATC Spindles 90˚Angle Motor Spindle ø1.0" ø0.98" CHS ø0.897" Straight Motor Spindles (Flange Type) 60,000 RA-271E 2-p53 CHA 3 MA 13,330 E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" SHEENUS neo SONIC CUTTER 2 E2530 / E2550 E2530 / E2550 EmaxEVO 60,000 EM-3060 2-p58 60,000 EM-3060J 2-p59 80,000 EM-3080J 2-p76 8 APPLICATION EXAMPLES INDEX Air Bearing Spindle (Flange Type) 2-p34 80,000 Flange Type NRAF-5080 CHK 2-p77 2-p43 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p44 BRUSHLESS MOTOR & SPINDLE E3000 SERIES One Piece Type ø1.18" ø0.98" ø0.79" (ø30 mm) (ø25 mm) (ø20 mm) 1 EmaxEVO 1 One Piece Type - System Chart Features of E3000 Series EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE Collet Nut Collet K-265 CHK-[][] PRESTO II SHEENUS neo SONIC CUTTER 2 PRESTO II Grindstone Arbor AGM-03 Motor Cord (Cord with Quick Disconnect) • EMCD-3000J3M/4M/6M/8M *1 E2530 / E2550 ø1.0"/ø0.98" Grindstone Flange EGF-19 Brushless Motor Spindle EMSF-3060K E3000 - One Piece E3000 - Modular ø1.18" Motor Cord (Cord with Quick Disconnect) EMCD-3000J3M/4M/6M/8M *1 E4000 Brushless Motor Spindle EMS-3060A A ø0.79"(ø20 mm), ø0.98"(ø25 mm), ø1.18"(ø30 mm) motor spindle diameter are available. Motor Cord (Cord with Quick Disconnect) • Air-Cooling System EMCD-3000J3M/4M/6M/8M *1 Air-cooled motor uses a small volume of air (1.0 CFM) to minimize heat buildup and allow continuous operation. Air pressure required is 36-44 PSI. Collet Nut Collet K-265 CHK-[][] ø0.897" ø1.0" ø0.98" ø1.18" Arbor for Metal Saw KCH-03 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Brushless Motor Spindle EMR-3008K Grindstone Arbor AGM-03 120V Motor Cord EMCD-3000J3M/4M/6M/8M *1 Selector Unit NE212 Control Unit NE211 HES810 Motor Cord EMCD-30004M/6M/8M *2 2 Power Source Auto Detection iSpeed3 Power Source is 100-240V for international operation. Eliminate the need of setting the voltage or changing fuses. System, External Input / Output • Protection Control Signal Error function : Motor/Spindle is stopped safety, Error LED is lit. ex.) Overload operation, Air shortage, Motor Spindle can be controlled and monitored by external input-output connector. ex.) Control ; Start/Stop, FWD./REV., Motor Speed Control Monitor ; Motor rotating, Torque Load. • Use E2550 Motor & Spindle with E3000 Control Unit E2550 motor & spindle can be used with E3000 control unit. {Less than 50,000 min-1(rpm)} • ø0.897"(ø22.8 mm) Spindle Usage E3000 series uses a short body that is hardened and precision ground for excellent durability. • Centering Mode Switch This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. Xpeed Brushless Motor Spindle EM25-S6000 Motor Cord EMCD-30004M/6M/8M *2 Brushless Motor Spindle EM20-S6000 Motor Cord EMCD-30004M/6M/8M *2 Collet Nut Collet CHN-A CHA-[][] AIR LINE KIT 6 8 Collet Nut Collet K-265 CHK-[][] Arbor for Metal Saw KCH-03 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 Automatic Control System Chart •Single Motor Spindle Operation Brushless Motor Spindle Motor Cord (Cord with Quick Disconnect) EMA-3020K EMCD-3000J3M/4M/6M/8M *1 Xpeed •Sequential Operation of up to 4 Motor / Spindles Air Compressor Air *1 : Motor Cord is Sold Separately. Motor Spindle Motor Cord Air NE211 Control •ON/OFF Unit •R/L Motor Cord Compressor Motor Spindle Air Motor Spindle Sequence Motor Spindle PARTS Motor Cord NE212 Selector Connector for Unit communication Motor Spindle Grindstone Arbor AGM-03 *2 : Motor Cord is Sold Separately. Brushless Motor Spindle Motor Cord (Cord with Quick Disconnect) EMA-3020S EMCD-3000J3M/4M/6M/8M *1 Motor Cord EMCD-3000A-4M/6M/8M (90º Angle Type) is available. Please see for 2-p53. 5 AIR LINE KIT 6 Compressor •ON/OFF NE211 •R/L Control •Motor Selector Unit Sequence 7 TECHNICAL DATA 8 APPLICATION EXAMPLES Please see for 2-p49. Collet CHSS-[][] 2-p44 ø1.18" HPS *Clean dry air is required. APPLICATION EXAMPLES INDEX E3000 - Modular HES510 Simple screw-lock connector makes changing motors extremely easy. Electric and Air feed incorporated into a single connector. Air Line Kit AL-C1204 PARTS 7 ø0.897" E3000 - One Piece HTS HPS TECHNICAL DATA ø1.0"/ø0.98" E2530 / E2550 4 HTS 5 E2530 / E2550 ø1.0" ø0.98" Use ø0.897"(ø22.8 mm) spindles from our general catalog and an EM25-5000-J4 motor {ø0.98"(ø25 mm) 250W} with NE211. Connector Attaches Directly to the • Motor Back of the Motor / Spindle. No simultaneous operation. Brushless Motor Spindle EM30-S6000 • • High Rigidity, Short Body Spindle Accuracy Spindle Accuracy is within 1 µm (TIR). (Cord with Quick Disconnect) one motor can *Only be operated at a time. Collet Nut Collet K-265 CHK-[][] • • Motor Spindle Diameter 3 MA The maximum motor speed 60,000 min-1(rpm) is realized by using high performance brushless motor and ceramic bearings. 350W for ø1.18"(ø30 mm) spindle. 250W for ø0.98"(ø25 mm) and ø0.79"(ø20 mm) spindle. ø1.0"/ø0.98" ø0.897" Collet Nut Collet CHN-A CHA-[][] Maximum Motor Speed 60,000 min-1(rpm) Motor Output with 350W • Maximum Power Supply ø0.897" E3000 - 80,000rpm Motor Cord Sold Separately EM30-S6000 Brushless Motor Spindle EMS-3060K iSpeed3 E2530 / E2550 SHEENUS neo SONIC CUTTER Arbor for Metal Saw KCH-03 connecting NE211 to NE212, up to 4 motors can be connected to *When NE212 providing individual control of each motor. INDEX (4 motors can not be run simultaneously.) 2-p45 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p44 BRUSHLESS MOTOR & SPINDLE E3000 SERIES One Piece Type ø1.18" ø0.98" ø0.79" (ø30 mm) (ø25 mm) (ø20 mm) 1 EmaxEVO 1 One Piece Type - System Chart Features of E3000 Series EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE Collet Nut Collet K-265 CHK-[][] PRESTO II SHEENUS neo SONIC CUTTER 2 PRESTO II Grindstone Arbor AGM-03 Motor Cord (Cord with Quick Disconnect) • EMCD-3000J3M/4M/6M/8M *1 E2530 / E2550 ø1.0"/ø0.98" Grindstone Flange EGF-19 Brushless Motor Spindle EMSF-3060K E3000 - One Piece E3000 - Modular ø1.18" Motor Cord (Cord with Quick Disconnect) EMCD-3000J3M/4M/6M/8M *1 E4000 Brushless Motor Spindle EMS-3060A A ø0.79"(ø20 mm), ø0.98"(ø25 mm), ø1.18"(ø30 mm) motor spindle diameter are available. Motor Cord (Cord with Quick Disconnect) • Air-Cooling System EMCD-3000J3M/4M/6M/8M *1 Air-cooled motor uses a small volume of air (1.0 CFM) to minimize heat buildup and allow continuous operation. Air pressure required is 36-44 PSI. Collet Nut Collet K-265 CHK-[][] ø0.897" ø1.0" ø0.98" ø1.18" Arbor for Metal Saw KCH-03 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Brushless Motor Spindle EMR-3008K Grindstone Arbor AGM-03 120V Motor Cord EMCD-3000J3M/4M/6M/8M *1 Selector Unit NE212 Control Unit NE211 HES810 Motor Cord EMCD-30004M/6M/8M *2 2 Power Source Auto Detection iSpeed3 Power Source is 100-240V for international operation. Eliminate the need of setting the voltage or changing fuses. System, External Input / Output • Protection Control Signal Error function : Motor/Spindle is stopped safety, Error LED is lit. ex.) Overload operation, Air shortage, Motor Spindle can be controlled and monitored by external input-output connector. ex.) Control ; Start/Stop, FWD./REV., Motor Speed Control Monitor ; Motor rotating, Torque Load. • Use E2550 Motor & Spindle with E3000 Control Unit E2550 motor & spindle can be used with E3000 control unit. {Less than 50,000 min-1(rpm)} • ø0.897"(ø22.8 mm) Spindle Usage E3000 series uses a short body that is hardened and precision ground for excellent durability. • Centering Mode Switch This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. Xpeed Brushless Motor Spindle EM25-S6000 Motor Cord EMCD-30004M/6M/8M *2 Brushless Motor Spindle EM20-S6000 Motor Cord EMCD-30004M/6M/8M *2 Collet Nut Collet CHN-A CHA-[][] AIR LINE KIT 6 8 Collet Nut Collet K-265 CHK-[][] Arbor for Metal Saw KCH-03 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 Automatic Control System Chart •Single Motor Spindle Operation Brushless Motor Spindle Motor Cord (Cord with Quick Disconnect) EMA-3020K EMCD-3000J3M/4M/6M/8M *1 Xpeed •Sequential Operation of up to 4 Motor / Spindles Air Compressor Air *1 : Motor Cord is Sold Separately. Motor Spindle Motor Cord Air NE211 Control •ON/OFF Unit •R/L Motor Cord Compressor Motor Spindle Air Motor Spindle Sequence Motor Spindle PARTS Motor Cord NE212 Selector Connector for Unit communication Motor Spindle Grindstone Arbor AGM-03 *2 : Motor Cord is Sold Separately. Brushless Motor Spindle Motor Cord (Cord with Quick Disconnect) EMA-3020S EMCD-3000J3M/4M/6M/8M *1 Motor Cord EMCD-3000A-4M/6M/8M (90º Angle Type) is available. Please see for 2-p53. 5 AIR LINE KIT 6 Compressor •ON/OFF NE211 •R/L Control •Motor Selector Unit Sequence 7 TECHNICAL DATA 8 APPLICATION EXAMPLES Please see for 2-p49. Collet CHSS-[][] 2-p44 ø1.18" HPS *Clean dry air is required. APPLICATION EXAMPLES INDEX E3000 - Modular HES510 Simple screw-lock connector makes changing motors extremely easy. Electric and Air feed incorporated into a single connector. Air Line Kit AL-C1204 PARTS 7 ø0.897" E3000 - One Piece HTS HPS TECHNICAL DATA ø1.0"/ø0.98" E2530 / E2550 4 HTS 5 E2530 / E2550 ø1.0" ø0.98" Use ø0.897"(ø22.8 mm) spindles from our general catalog and an EM25-5000-J4 motor {ø0.98"(ø25 mm) 250W} with NE211. Connector Attaches Directly to the • Motor Back of the Motor / Spindle. No simultaneous operation. Brushless Motor Spindle EM30-S6000 • • High Rigidity, Short Body Spindle Accuracy Spindle Accuracy is within 1 µm (TIR). (Cord with Quick Disconnect) one motor can *Only be operated at a time. Collet Nut Collet K-265 CHK-[][] • • Motor Spindle Diameter 3 MA The maximum motor speed 60,000 min-1(rpm) is realized by using high performance brushless motor and ceramic bearings. 350W for ø1.18"(ø30 mm) spindle. 250W for ø0.98"(ø25 mm) and ø0.79"(ø20 mm) spindle. ø1.0"/ø0.98" ø0.897" Collet Nut Collet CHN-A CHA-[][] Maximum Motor Speed 60,000 min-1(rpm) Motor Output with 350W • Maximum Power Supply ø0.897" E3000 - 80,000rpm Motor Cord Sold Separately EM30-S6000 Brushless Motor Spindle EMS-3060K iSpeed3 E2530 / E2550 SHEENUS neo SONIC CUTTER Arbor for Metal Saw KCH-03 connecting NE211 to NE212, up to 4 motors can be connected to *When NE212 providing individual control of each motor. INDEX (4 motors can not be run simultaneously.) 2-p45 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p46 “E3000 SERIES” CONTROL UNIT “E3000 SERIES” SELECTOR UNIT for international operation • AC100-240V 1,000~60,000 (rpm) • Maximum Output 350W • External Inputmin/ Output Control Signal • for international operation • AC100-240V Up to 4 motors can be connected to NE212 providing individual control of each motor. • (Simultaneous motor operation is not possible) -1 (Refer to 7-p2~p9 page of this catalog) 9775 CONTROL UNIT NE211 ESPERT E2530 / E2550 ø1.0"/ø0.98" •••••• [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload [5] Error Reset Switch (RESET) [7] Control Switch (AUTO/MANUAL) [8] Rotating Direction Selector Switch (FWD./REV.) [9] Start Switch (START) External Input-Output Connector A (D-SUB25 Female) E3000 - Modular ø1.18" Motor Connector ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm MA ø0.897" ø1.0" ø0.98" ø1.18" 4 HES510 [3] Running LED (RUN) [4] Link LED (LINK) [10] [6] [5] Motor Select LED [6] Motor Speed Adjustment Switch Motor Output Connector 1~4 [7] (SPEED) [11] Display (FWD./REV.) [8] Motor Selector Switch (MOTOR SEL) [9] Display [10] FWD./REV. LED (FWD. / REV.) [8] Motor Input Connector Air Input Joint ø6 mm [2] [10] Connector for Communication [3] [11] (D-SUB9 Female) Power Switch [7] [8] [9] • Communication Connector for NE212 Intake with Power Fuse : NE211 : AC120V : 1,000-60,000 min-1(rpm) : 350W (For ø1.18") : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" CAT. No. : NE212 : AC120V : 0.15A : Max. 4.0CFM (51PSI / Using max. 4 motor/spindles) Weight Dimensions : 4 lb. 3.02 oz. : W3.46" x D5.43" x H9.37" 6.61" 7.40" M4x0.7 Stepped Bracket Model Price Standard Equipment · Accessories CAT. No. 9775 120V NE211 (B type) Xpeed PARTS 7 9781 *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type (2-p47) and order accordingly. • Mounting Bracket 3.46" 5.43" 3.58" 2.56" 1.77" 0.18" 5.67" 5.43" TECHNICAL DATA Back Mounting 4 HES510 Plug Type Price Standard Equipment · Accessories Model 9.69" 8 9.29" APPLICATION EXAMPLES INDEX 8407 E3000PEX-4 NE212 HTS HPS Xpeed 5 Plug Type For 100V Fit to Price NE211 (A type) For 120V (B type) Main Usable Area For Japan For U.S.A. and Canada AIR LINE KIT 6 PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug Product 7 TECHNICAL DATA 8 APPLICATION EXAMPLES For Europe INDEX 25 / 15 Pin Interface Cable 6.61" 7.40" M4x0.7 Stepped Bracket Model (B type) • Power Source Plug Control Panel Extension Cord CAT. No. 120V • Power Cord : 6 ft • Connect NE211 to NE212 Cable : 23.62" • Communication Cable : 23.62" • Connector Cap (Provided) • Plug to avoid Air Flow • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T1.6AL) 250V: 2 pcs. *Power Source for Global Operation (AC100-240V). Please check the power source plug type and order accordingly. Optional 0.39" 6 • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. 9.88" 10.67" 5 ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" M4x0.7 Stepped Bracket Bottom Mounting ø0.897" HES810 HTS AIR LINE KIT 3 MS 0.39" HES810 HPS E4000 ø1.18" E3000 Selector Unit Plug Type ø0.897" MA Specifications Model Power Source Power Consumption Air Flow Volume 3.39" 2.56" 1.77" 0.18" 5.83" 5.43" Air Output Joint 1~4 E3000 Control Unit ø1.0"/ø0.98" E2530 / E2550 E3000 - 80,000rpm Specifications Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions E2530 / E2550 ø1.0"/ø0.98" ø0.897" Mounting Bracket 3.46" [5] [6] iSpeed3 ø1.18" Intake with Power Fuse Air Input Joint ø6 mm 2 E3000 - Modular Power Switch Air Output Joint ø6 mm SHEENUS neo SONIC CUTTER E3000 - One Piece [4] MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II [5] [7] Rotating Direction Selector Switch E4000 3 IMPULSE [10] Motor Speed Adjustment Switch (SPEED) [1] External Input-Output Connector B (D-SUB15 Female) 9.37" E3000 - One Piece [1] Error LED (ERROR) [2] Warning LED (WARNING) [9] [6] Gear Setting Switch (GEAR) E2530 / E2550 ø0.897" ROTUS [3] Warning LED (WARNING) 2 iSpeed3 ESPERT [1] [2] [3] [4] [2] Running LED (RUN) LOAD 1 EmaxEVO 3.46" [1] Load Meter* * : Load Meter 60,000 min-1(rpm) 9.88" 10.67" SHEENUS neo SONIC CUTTER SELECTOR UNIT NE212 9.29" PRESTO II 9781 9.69" IMPULSE 3.46" CAT. No. 3.39" 2.56" 1.77" 0.18" ROTUS 60,000 min-1(rpm) 0.39" CAT. No. 9.37" 1 EmaxEVO CAT. No. Model Fit to Price Bottom Mounting 2-p46 3.39" 2.56" 1.77" 0.18" 0.39" Back Mounting M4x0.7 Stepped Bracket DB25M DB25M NE211 DB15M DB15M NE211 * Order by catalog number. 2-p47 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p46 “E3000 SERIES” CONTROL UNIT “E3000 SERIES” SELECTOR UNIT for international operation • AC100-240V 1,000~60,000 (rpm) • Maximum Output 350W • External Inputmin/ Output Control Signal • for international operation • AC100-240V Up to 4 motors can be connected to NE212 providing individual control of each motor. • (Simultaneous motor operation is not possible) -1 (Refer to 7-p2~p9 page of this catalog) 9775 CONTROL UNIT NE211 ESPERT E2530 / E2550 ø1.0"/ø0.98" •••••• [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload [5] Error Reset Switch (RESET) [7] Control Switch (AUTO/MANUAL) [8] Rotating Direction Selector Switch (FWD./REV.) [9] Start Switch (START) External Input-Output Connector A (D-SUB25 Female) E3000 - Modular ø1.18" Motor Connector ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm MA ø0.897" ø1.0" ø0.98" ø1.18" 4 HES510 [3] Running LED (RUN) [4] Link LED (LINK) [10] [6] [5] Motor Select LED [6] Motor Speed Adjustment Switch Motor Output Connector 1~4 [7] (SPEED) [11] Display (FWD./REV.) [8] Motor Selector Switch (MOTOR SEL) [9] Display [10] FWD./REV. LED (FWD. / REV.) [8] Motor Input Connector Air Input Joint ø6 mm [2] [10] Connector for Communication [3] [11] (D-SUB9 Female) Power Switch [7] [8] [9] • Communication Connector for NE212 Intake with Power Fuse : NE211 : AC120V : 1,000-60,000 min-1(rpm) : 350W (For ø1.18") : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" CAT. No. : NE212 : AC120V : 0.15A : Max. 4.0CFM (51PSI / Using max. 4 motor/spindles) Weight Dimensions : 4 lb. 3.02 oz. : W3.46" x D5.43" x H9.37" 6.61" 7.40" M4x0.7 Stepped Bracket Model Price Standard Equipment · Accessories CAT. No. 9775 120V NE211 (B type) Xpeed PARTS 7 9781 *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type (2-p47) and order accordingly. • Mounting Bracket 3.46" 5.43" 3.58" 2.56" 1.77" 0.18" 5.67" 5.43" TECHNICAL DATA Back Mounting 4 HES510 Plug Type Price Standard Equipment · Accessories Model 9.69" 8 9.29" APPLICATION EXAMPLES INDEX 8407 E3000PEX-4 NE212 HTS HPS Xpeed 5 Plug Type For 100V Fit to Price NE211 (A type) For 120V (B type) Main Usable Area For Japan For U.S.A. and Canada AIR LINE KIT 6 PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug Product 7 TECHNICAL DATA 8 APPLICATION EXAMPLES For Europe INDEX 25 / 15 Pin Interface Cable 6.61" 7.40" M4x0.7 Stepped Bracket Model (B type) • Power Source Plug Control Panel Extension Cord CAT. No. 120V • Power Cord : 6 ft • Connect NE211 to NE212 Cable : 23.62" • Communication Cable : 23.62" • Connector Cap (Provided) • Plug to avoid Air Flow • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T1.6AL) 250V: 2 pcs. *Power Source for Global Operation (AC100-240V). Please check the power source plug type and order accordingly. Optional 0.39" 6 • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. 9.88" 10.67" 5 ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" M4x0.7 Stepped Bracket Bottom Mounting ø0.897" HES810 HTS AIR LINE KIT 3 MS 0.39" HES810 HPS E4000 ø1.18" E3000 Selector Unit Plug Type ø0.897" MA Specifications Model Power Source Power Consumption Air Flow Volume 3.39" 2.56" 1.77" 0.18" 5.83" 5.43" Air Output Joint 1~4 E3000 Control Unit ø1.0"/ø0.98" E2530 / E2550 E3000 - 80,000rpm Specifications Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions E2530 / E2550 ø1.0"/ø0.98" ø0.897" Mounting Bracket 3.46" [5] [6] iSpeed3 ø1.18" Intake with Power Fuse Air Input Joint ø6 mm 2 E3000 - Modular Power Switch Air Output Joint ø6 mm SHEENUS neo SONIC CUTTER E3000 - One Piece [4] MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II [5] [7] Rotating Direction Selector Switch E4000 3 IMPULSE [10] Motor Speed Adjustment Switch (SPEED) [1] External Input-Output Connector B (D-SUB15 Female) 9.37" E3000 - One Piece [1] Error LED (ERROR) [2] Warning LED (WARNING) [9] [6] Gear Setting Switch (GEAR) E2530 / E2550 ø0.897" ROTUS [3] Warning LED (WARNING) 2 iSpeed3 ESPERT [1] [2] [3] [4] [2] Running LED (RUN) LOAD 1 EmaxEVO 3.46" [1] Load Meter* * : Load Meter 60,000 min-1(rpm) 9.88" 10.67" SHEENUS neo SONIC CUTTER SELECTOR UNIT NE212 9.29" PRESTO II 9781 9.69" IMPULSE 3.46" CAT. No. 3.39" 2.56" 1.77" 0.18" ROTUS 60,000 min-1(rpm) 0.39" CAT. No. 9.37" 1 EmaxEVO CAT. No. Model Fit to Price Bottom Mounting 2-p46 3.39" 2.56" 1.77" 0.18" 0.39" Back Mounting M4x0.7 Stepped Bracket DB25M DB25M NE211 DB15M DB15M NE211 * Order by catalog number. 2-p47 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p48 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR SPINDLE COOLANT 1 CAT. No. E3000 Series can be used in conjunction with water or oil based coolants. 1756 Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT BRUSHLESS MOTOR SPINDLE EMS-3060K 60,000 min-1(rpm) CAT. No. 1757 BRUSHLESS MOTOR SPINDLE EMR-3008K 1 EmaxEVO EmaxEVO (1.83") Max. Tool Mounting Depth (1.83") Max. Tool Mounting Depth ESPERT Maximum allowable motor speed for the spindle Grease Point Reduction Ratio 1 4 SHEENUS neo SONIC CUTTER 0.79" Recommended Clamping Area (0.67") 2 PRESTO II 0.79" (0.67") Maximum rotating speed at the cutting tool iSpeed3 2 (0.43") 6.13" (7.22") 8,000 min-1(rpm) SHEENUS neo SONIC CUTTER 1' Quick Disconnect Cord 1.77" Recommended Clamping Area (0.43") 5.37" (6.46") ROTUS IMPULSE 1' Quick Disconnect Cord 1.77" ESPERT 32,000 min-1(rpm) ø0.63" PRESTO II 0 mm ø30-0.01 (ø1.18") 0 ø30-0.01 mm (ø1.18") IMPULSE ø0.63" (3.04") ROTUS iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA E2530 / E2550 • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 3.93 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.)x 7 (W)mm ø1.0"/ø0.98" Brushless Motor Spindle CAT. No. Model 1756 EMS3060K Maximum allowable motor speed for the spindle Standard Equipment · Accessories Price Maximum rotating speed at the cutting tool • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. 32,000 min 8,000 min Brushless Motor Spindle (rpm) -1 (rpm) Model 1757 EMR3008K -1 • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 6.93 oz. Note : Motor Cord is sold separately. CAT. No. ø1.0" ø0.98" Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. • Gear Grease (10 mL) ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Note : Motor Cord is sold separately. < Optional > • Collet (CHK-[][]) ....................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel with I.D. of ø5 mm ø0.897" E2530 / E2550 E4000 3 To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. ø1.18" MS MA ø0.897" ø1.0" ø0.98" ø1.18" MS HES510 HES810 1755 BRUSHLESS MOTOR SPINDLE EMS-3060A 60,000 min-1(rpm) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MOTOR CORD (1.24") Max. Tool Mounting Depth For light duty Grinding Product ø0.46" 4 CAT. No. 0 mm ø30-0.01 (ø1.18") ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 0.55" HPS 5 Description · Model Length 1778 Motor Cord 3M EMCD-3000J-3M 10 ft (3.0m) 1768 Motor Cord 4M EMCD-3000J-4M 12.1 ft (3.7m) Motor Cord 6M 18.7 ft (5.7m) Std. Accessories 1' Quick Disconnect Cord 1.77" Recommended Clamping Area (0.58") 1767 EMCD-3000J-6M (0.43") 4.87" (5.88") Motor Cord 8M • Air Hose • Connector Cap (Provided) Model Standard Equipment · Accessories 1755 EMS3060A • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price •EMS-3060K, EMS-3060A 8 Note : Motor Cord is sold separately. Torque 450 35 400 30 7 300 6 Output 5 250 4 200 3 150 8 300 Output 25 250 20 200 15 150 10 100 APPLICATION EXAMPLES INDEX Continuous Duty Area 100 Continuous Duty Area TECHNICAL DATA 350 Torque 350 7 5 50 50 1 0 0 PARTS •EMR-3008K 9 2 10 20 30 40 Speed { x 103 min-1(rpm) } 2-p48 HPS 6 Torque Characteristics Graph . < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft CAT. No. Output (W) INDEX HTS 5 Brushless Motor Spindle Torque (cN m) APPLICATION EXAMPLES • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 1.46 oz. Output (W) 8 EMS-3060K EMS-3060A EMR-3008K AIR LINE KIT . 7 TECHNICAL DATA 4 Xpeed 25.3 ft (7.7m) 1766 EMCD-3000J-8M Torque (cN m) PARTS Price HES510 AIR LINE KIT 6 Fit to HES810 HTS Xpeed CAT. No. 50 60 0 0 1 2 3 4 5 6 7 8 Speed { x 103 min-1(rpm) } * Order by catalog number. 2-p49 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p48 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR SPINDLE COOLANT 1 CAT. No. E3000 Series can be used in conjunction with water or oil based coolants. 1756 Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT BRUSHLESS MOTOR SPINDLE EMS-3060K 60,000 min-1(rpm) CAT. No. 1757 BRUSHLESS MOTOR SPINDLE EMR-3008K 1 EmaxEVO EmaxEVO (1.83") Max. Tool Mounting Depth (1.83") Max. Tool Mounting Depth ESPERT Maximum allowable motor speed for the spindle Grease Point Reduction Ratio 1 4 SHEENUS neo SONIC CUTTER 0.79" Recommended Clamping Area (0.67") 2 PRESTO II 0.79" (0.67") Maximum rotating speed at the cutting tool iSpeed3 2 (0.43") 6.13" (7.22") 8,000 min-1(rpm) SHEENUS neo SONIC CUTTER 1' Quick Disconnect Cord 1.77" Recommended Clamping Area (0.43") 5.37" (6.46") ROTUS IMPULSE 1' Quick Disconnect Cord 1.77" ESPERT 32,000 min-1(rpm) ø0.63" PRESTO II 0 mm ø30-0.01 (ø1.18") 0 ø30-0.01 mm (ø1.18") IMPULSE ø0.63" (3.04") ROTUS iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA E2530 / E2550 • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 3.93 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.)x 7 (W)mm ø1.0"/ø0.98" Brushless Motor Spindle CAT. No. Model 1756 EMS3060K Maximum allowable motor speed for the spindle Standard Equipment · Accessories Price Maximum rotating speed at the cutting tool • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. 32,000 min 8,000 min Brushless Motor Spindle (rpm) -1 (rpm) Model 1757 EMR3008K -1 • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 6.93 oz. Note : Motor Cord is sold separately. CAT. No. ø1.0" ø0.98" Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. • Gear Grease (10 mL) ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Note : Motor Cord is sold separately. < Optional > • Collet (CHK-[][]) ....................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel with I.D. of ø5 mm ø0.897" E2530 / E2550 E4000 3 To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. ø1.18" MS MA ø0.897" ø1.0" ø0.98" ø1.18" MS HES510 HES810 1755 BRUSHLESS MOTOR SPINDLE EMS-3060A 60,000 min-1(rpm) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MOTOR CORD (1.24") Max. Tool Mounting Depth For light duty Grinding Product ø0.46" 4 CAT. No. 0 mm ø30-0.01 (ø1.18") ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 0.55" HPS 5 Description · Model Length 1778 Motor Cord 3M EMCD-3000J-3M 10 ft (3.0m) 1768 Motor Cord 4M EMCD-3000J-4M 12.1 ft (3.7m) Motor Cord 6M 18.7 ft (5.7m) Std. Accessories 1' Quick Disconnect Cord 1.77" Recommended Clamping Area (0.58") 1767 EMCD-3000J-6M (0.43") 4.87" (5.88") Motor Cord 8M • Air Hose • Connector Cap (Provided) Model Standard Equipment · Accessories 1755 EMS3060A • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price •EMS-3060K, EMS-3060A 8 Note : Motor Cord is sold separately. Torque 450 35 400 30 7 300 6 Output 5 250 4 200 3 150 8 300 Output 25 250 20 200 15 150 10 100 APPLICATION EXAMPLES INDEX Continuous Duty Area 100 Continuous Duty Area TECHNICAL DATA 350 Torque 350 7 5 50 50 1 0 0 PARTS •EMR-3008K 9 2 10 20 30 40 Speed { x 103 min-1(rpm) } 2-p48 HPS 6 Torque Characteristics Graph . < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft CAT. No. Output (W) INDEX HTS 5 Brushless Motor Spindle Torque (cN m) APPLICATION EXAMPLES • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 1.46 oz. Output (W) 8 EMS-3060K EMS-3060A EMR-3008K AIR LINE KIT . 7 TECHNICAL DATA 4 Xpeed 25.3 ft (7.7m) 1766 EMCD-3000J-8M Torque (cN m) PARTS Price HES510 AIR LINE KIT 6 Fit to HES810 HTS Xpeed CAT. No. 50 60 0 0 1 2 3 4 5 6 7 8 Speed { x 103 min-1(rpm) } * Order by catalog number. 2-p49 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p50 “E3000 SERIES” ø1.18" (ø30 mm) FLANGE TYPE BRUSHLESS MOTOR SPINDLE COOLANT CAT. No. 1 FLANGE TYPE BRUSHLESS MOTOR SPINDLE EMSF-3060K 7644 60,000 min-1(rpm) MOTOR CORD 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 EmaxEVO CAT. No. Description · Model Length 30mm Spindle with a Pre-mounted (1.3" x 1.69") Flange. 1778 Motor Cord 3M EMCD-3000J-3M 10 ft (3.0m) Pre-mounted flange for easy installation on a machines standard boring bar holder. 1768 EMCD-3000J-4M Motor Cord 4M 12.1 ft (3.7m) Motor Cord 6M EMCD-3000J-6M 18.7 ft (5.7m) Motor Cord 8M 25.3 ft (7.7m) Product Features: • • • • Eliminates the chance of spindle damage due to over tightening. 1767 Flange is mountable on either side of the machines holder. 1766 EMCD-3000J-8M iSpeed3 E3000 - 80,000rpm No Clamping Body mounting hole 4-ø4.2 Through hole 1.30" 1.97" 3 ø1.18" ø1.0"/ø0.98" ø0.897" No Clamping (1.99") 0.31" E3000 - 80,000rpm (1.09") (0.43") 5.37" (6.03") 3 1' Quick Disconnect Cord MA MA ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS 2 E4000 (0.67") MS SHEENUS neo SONIC CUTTER E3000 - Modular E4000 ø1.18" PRESTO II EMSF-3060K E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0" ø0.98" IMPULSE • Air Hose • Connector Cap (Provided) E2530 / E2550 ø0.63" 0 ø30-0.01 mm (ø1.18") ø1.18" ROTUS ø0.897" ø1.69" E3000 - Modular ESPERT ø1.0"/ø0.98" (1.83") Max. Tool Mounting Depth 54" ø1. ø0.897" E3000 - One Piece Price E2530 / E2550 35˚ 3 R2 E2530 / E2550 Fit to iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Std. Accessories ø0.897" • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 5.87 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.)x 7 (W)mm ø1.0" ø0.98" Flange Type Brushless Motor Spindle CAT. No. Model Standard Equipment · Accessories 7644 EMSF3060K • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. • Air Hose 0.3m : 1 pc. • Hexagon Socket Bolt (M4 x 16) : 4 pcs. ø1.18" Price MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 Note : Motor Cord is sold separately. HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 Torque Characteristics Graph AIR LINE KIT 6 •EMSF-3060K 6 PARTS PARTS 450 9 APPLICATION EXAMPLES . Torque (cN m) 8 8 7 350 6 300 Output 5 250 4 200 3 150 2 100 Continuous Duty Area TECHNICAL DATA 8 APPLICATION EXAMPLES 50 1 INDEX 0 0 7 400 Torque Output (W) 7 TECHNICAL DATA 5 AIR LINE KIT 10 20 30 40 50 INDEX 60 Speed { x 103 min-1(rpm) } 2-p50 * Order by catalog number. 2-p51 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p50 “E3000 SERIES” ø1.18" (ø30 mm) FLANGE TYPE BRUSHLESS MOTOR SPINDLE COOLANT CAT. No. 1 FLANGE TYPE BRUSHLESS MOTOR SPINDLE EMSF-3060K 7644 60,000 min-1(rpm) MOTOR CORD 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 EmaxEVO CAT. No. Description · Model Length 30mm Spindle with a Pre-mounted (1.3" x 1.69") Flange. 1778 Motor Cord 3M EMCD-3000J-3M 10 ft (3.0m) Pre-mounted flange for easy installation on a machines standard boring bar holder. 1768 EMCD-3000J-4M Motor Cord 4M 12.1 ft (3.7m) Motor Cord 6M EMCD-3000J-6M 18.7 ft (5.7m) Motor Cord 8M 25.3 ft (7.7m) Product Features: • • • • Eliminates the chance of spindle damage due to over tightening. 1767 Flange is mountable on either side of the machines holder. 1766 EMCD-3000J-8M iSpeed3 E3000 - 80,000rpm No Clamping Body mounting hole 4-ø4.2 Through hole 1.30" 1.97" 3 ø1.18" ø1.0"/ø0.98" ø0.897" No Clamping (1.99") 0.31" E3000 - 80,000rpm (1.09") (0.43") 5.37" (6.03") 3 1' Quick Disconnect Cord MA MA ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS 2 E4000 (0.67") MS SHEENUS neo SONIC CUTTER E3000 - Modular E4000 ø1.18" PRESTO II EMSF-3060K E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0" ø0.98" IMPULSE • Air Hose • Connector Cap (Provided) E2530 / E2550 ø0.63" 0 ø30-0.01 mm (ø1.18") ø1.18" ROTUS ø0.897" ø1.69" E3000 - Modular ESPERT ø1.0"/ø0.98" (1.83") Max. Tool Mounting Depth 54" ø1. ø0.897" E3000 - One Piece Price E2530 / E2550 35˚ 3 R2 E2530 / E2550 Fit to iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Std. Accessories ø0.897" • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Max. Output Power .................................................... 350W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 5.87 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.)x 7 (W)mm ø1.0" ø0.98" Flange Type Brushless Motor Spindle CAT. No. Model Standard Equipment · Accessories 7644 EMSF3060K • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. • Air Hose 0.3m : 1 pc. • Hexagon Socket Bolt (M4 x 16) : 4 pcs. ø1.18" Price MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 Note : Motor Cord is sold separately. HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 Torque Characteristics Graph AIR LINE KIT 6 •EMSF-3060K 6 PARTS PARTS 450 9 APPLICATION EXAMPLES . Torque (cN m) 8 8 7 350 6 300 Output 5 250 4 200 3 150 2 100 Continuous Duty Area TECHNICAL DATA 8 APPLICATION EXAMPLES 50 1 INDEX 0 0 7 400 Torque Output (W) 7 TECHNICAL DATA 5 AIR LINE KIT 10 20 30 40 50 INDEX 60 Speed { x 103 min-1(rpm) } 2-p50 * Order by catalog number. 2-p51 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p52 “E3000 SERIES” BRUSHLESS MOTOR SPINDLE COOLANT Outside Diameter BRUSHLESS MOTOR SPINDLE EM30-S6000 ø1.18" (0.69") 1745 CAT. No. Outside Diameter (1.97") Max. Tool Mounting Depth (ø30mm) ROTUS 60,000 min-1(rpm) 5.89" BRUSHLESS MOTOR SPINDLE EM20-S6000 ø0.79" (1.61") Max. Tool Mounting Depth (ø20mm) (0.58") PRESTO II SHEENUS neo SONIC CUTTER ø0.63" 0 ø30-0.01 mm (ø1.18") IMPULSE E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 PRESTO II • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 350 W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 4.28 oz. Brushless Motor Spindle ø1.18"(ø30 mm) CAT. No. 1747 < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) Model EM30S6000 Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. 1.34" • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 250 W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.11 oz. *High precision type is also available for CHK-3.0, 3.175, 4.0, 6.0, 6.35 • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft Product CAT. No. Outside Diameter 1746 BRUSHLESS MOTOR SPINDLE EM25-S6000 ø0.98" 60,000 min-1(rpm) (1.37") (0.51") (1.61") Max. Tool Mounting Depth (ø25mm) (0.58") ø 0.46" 0 ø25-0.01 mm (ø0.98") Product PARTS 7 TECHNICAL DATA 8 MA Length 1748 Motor Cord 4M EMCD-3000-4M 13 ft 1749 Motor Cord 6M EMCD-3000-6M 19 ft 1750 Motor Cord 8M EMCD-3000-8M 26 ft 1743 Recommended Clamping Area Std. Accessories Fit to Price < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft CAT. No. 1746 Model EM25S6000 Standard Equipment · Accessories ø1.18" • Air Hose • Connector Cap (Provided) MS EM30-S6000 EM25-S6000 EM20-S6000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Description · Model Length • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Std. Accessories Fit to Price HTS HPS 13 ft Xpeed Motor Cord 6M EMCD-3000A-6M • Air Hose • Connector Cap (Provided) 19 ft EM30-S6000 EM25-S6000 EM20-S6000 5 AIR LINE KIT 1742 EMCD-3000A-8M Price ø0.897" ø1.0" ø0.98" Motor Cord 8M Brushless Motor Spindle ø0.98"(ø25 mm) 26 ft 6 PARTS Torque Characteristics Graph •EM30-S6000 Note : Motor Cord is sold separately. . Torque (cN m) 7 350 6 300 Output 5 250 200 4 150 3 100 Continuous Duty Area 50 1 0 10 20 30 40 Speed { x 103 min-1(rpm) } 50 60 Torque 8 400 Torque TECHNICAL DATA 8 450 9 450 8 0 7 •EM20-S6000, EM25-S6000 9 2 2-p52 E3000 - 80,000rpm 3 Description · Model 1.18" APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" ø0.897" Note : Motor Cord is sold separately. 1744 EMCD-3000A-4M 400 APPLICATION EXAMPLES 350 7 Output (W) 6 ø0.897" E3000 - One Piece ø1.18" Motor Cord 4M • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 250 W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 13.23 oz. ø1.0"/ø0.98" E3000 - Modular CAT. No. CAT. No. 0.70" 0.59" 0.87" E2530 / E2550 E2530 / E2550 MOTOR CORD 90° Angle Type Xpeed AIR LINE KIT • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each 5.49" HES510 5 1745 iSpeed3 Price MOTOR CORD Straight Type MS HPS EM20S6000 Standard Equipment · Accessories E4000 ø1.18" HTS Model CAT. No. Refer to 6-p3 page of this catalog. ø1.0" ø0.98" HES810 Brushless Motor Spindle ø0.79"(ø20 mm) Note : Motor Cord is sold separately. ø0.897" 4 2 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER 6 300 Output 5 250 4 200 Output (W) ø0.897" IMPULSE . E2530 / E2550 ROTUS 1.42" Recommended Clamping Area iSpeed3 ø1.0"/ø0.98" ESPERT Recommended Clamping Area 0.79" 1 5.24" 0.71" 2 E2530 / E2550 60,000 min-1(rpm) EmaxEVO Torque (cN m) ESPERT 1747 ø0.46" EmaxEVO CAT. No. 0 ø20-0.01 mm (ø0.79") 1 COOLANT INDEX 150 3 2 100 Continuous Duty Area 50 1 0 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } * Order by catalog number. 2-p53 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:22 PM ページ 2-p52 “E3000 SERIES” BRUSHLESS MOTOR SPINDLE COOLANT Outside Diameter BRUSHLESS MOTOR SPINDLE EM30-S6000 ø1.18" (0.69") 1745 CAT. No. Outside Diameter (1.97") Max. Tool Mounting Depth (ø30mm) ROTUS 60,000 min-1(rpm) 5.89" BRUSHLESS MOTOR SPINDLE EM20-S6000 ø0.79" (1.61") Max. Tool Mounting Depth (ø20mm) (0.58") PRESTO II SHEENUS neo SONIC CUTTER ø0.63" 0 ø30-0.01 mm (ø1.18") IMPULSE E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 PRESTO II • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 350 W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................................... 1 lb. 4.28 oz. Brushless Motor Spindle ø1.18"(ø30 mm) CAT. No. 1747 < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) Model EM30S6000 Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. 1.34" • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 250 W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 8.11 oz. *High precision type is also available for CHK-3.0, 3.175, 4.0, 6.0, 6.35 • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft Product CAT. No. Outside Diameter 1746 BRUSHLESS MOTOR SPINDLE EM25-S6000 ø0.98" 60,000 min-1(rpm) (1.37") (0.51") (1.61") Max. Tool Mounting Depth (ø25mm) (0.58") ø 0.46" 0 ø25-0.01 mm (ø0.98") Product PARTS 7 TECHNICAL DATA 8 MA Length 1748 Motor Cord 4M EMCD-3000-4M 13 ft 1749 Motor Cord 6M EMCD-3000-6M 19 ft 1750 Motor Cord 8M EMCD-3000-8M 26 ft 1743 Recommended Clamping Area Std. Accessories Fit to Price < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft CAT. No. 1746 Model EM25S6000 Standard Equipment · Accessories ø1.18" • Air Hose • Connector Cap (Provided) MS EM30-S6000 EM25-S6000 EM20-S6000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Description · Model Length • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Std. Accessories Fit to Price HTS HPS 13 ft Xpeed Motor Cord 6M EMCD-3000A-6M • Air Hose • Connector Cap (Provided) 19 ft EM30-S6000 EM25-S6000 EM20-S6000 5 AIR LINE KIT 1742 EMCD-3000A-8M Price ø0.897" ø1.0" ø0.98" Motor Cord 8M Brushless Motor Spindle ø0.98"(ø25 mm) 26 ft 6 PARTS Torque Characteristics Graph •EM30-S6000 Note : Motor Cord is sold separately. . Torque (cN m) 7 350 6 300 Output 5 250 200 4 150 3 100 Continuous Duty Area 50 1 0 10 20 30 40 Speed { x 103 min-1(rpm) } 50 60 Torque 8 400 Torque TECHNICAL DATA 8 450 9 450 8 0 7 •EM20-S6000, EM25-S6000 9 2 2-p52 E3000 - 80,000rpm 3 Description · Model 1.18" APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" ø0.897" Note : Motor Cord is sold separately. 1744 EMCD-3000A-4M 400 APPLICATION EXAMPLES 350 7 Output (W) 6 ø0.897" E3000 - One Piece ø1.18" Motor Cord 4M • Motor Speed ............................................. 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Max. Output Power .................................................... 250 W • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight ................................................................ 13.23 oz. ø1.0"/ø0.98" E3000 - Modular CAT. No. CAT. No. 0.70" 0.59" 0.87" E2530 / E2550 E2530 / E2550 MOTOR CORD 90° Angle Type Xpeed AIR LINE KIT • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each 5.49" HES510 5 1745 iSpeed3 Price MOTOR CORD Straight Type MS HPS EM20S6000 Standard Equipment · Accessories E4000 ø1.18" HTS Model CAT. No. Refer to 6-p3 page of this catalog. ø1.0" ø0.98" HES810 Brushless Motor Spindle ø0.79"(ø20 mm) Note : Motor Cord is sold separately. ø0.897" 4 2 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Motor Cord ....................................... Length 13 ft, 19 ft, 26 ft MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER 6 300 Output 5 250 4 200 Output (W) ø0.897" IMPULSE . E2530 / E2550 ROTUS 1.42" Recommended Clamping Area iSpeed3 ø1.0"/ø0.98" ESPERT Recommended Clamping Area 0.79" 1 5.24" 0.71" 2 E2530 / E2550 60,000 min-1(rpm) EmaxEVO Torque (cN m) ESPERT 1747 ø0.46" EmaxEVO CAT. No. 0 ø20-0.01 mm (ø0.79") 1 COOLANT INDEX 150 3 2 100 Continuous Duty Area 50 1 0 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } * Order by catalog number. 2-p53 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:23 PM ページ 2-p54 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR SPINDLE Caution : “E3000 SERIES” MOTOR CORD & AIR LINE KIT Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT 1 CAT. No. 1759 90°ANGLE BRUSHLESS MOTOR SPINDLE EMA-3020K MOTOR CORD 1 EmaxEVO EmaxEVO Product Grease Point E2530 / E2550 ø0.63" 21,300 min-1(rpm) ø1.18" 32,000 min-1(rpm) ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" 4 18.7 ft (5.7m) Motor Cord 8M 25.3 ft (7.7m) -1 Maximum rotating speed at the cutting tool 21,300 min -1 (rpm) (rpm) • Spindle Accuracy ............................................... Within 2 µm • Max. Output Power .................................................... 280W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .......................................................... 1 lb. 10.81 oz. < Optional > • Collet (CHK-[][]) ....................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm CAT. No. 1759 Model EMA3020K Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. • Gear Grease (10 mL) •EMA-3020K, EMA-3020S 14 350 7 8 APPLICATION EXAMPLES INDEX 2-p54 0.79" 9.06" 7.48" AIR LINE KIT AL-C1204 The AL-C1204 Air Line Kit is •designed to deliver clean, dry air 0.79" ø6 mm 12 Note : Motor Cord is sold separately. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. 300 Torque Output 10 250 8 200 6 150 2-ø7mm 100 4 Continuous Duty Area 50 2 to Electric Motors via the Control Unit. The filter removes small amounts of debris while the adjustable regulator provides the correct air pressure for cooling and purging. 2 4 6 8 10 12 14 16 18 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 ø0.897" ø1.0" ø0.98" 4-ø7mm ø1.18" 20 21.3 Speed { x 103 min-1(rpm) } E3000 - Modular MA 0 0 ø0.897" E3000 - One Piece Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) Model 4504 AL-C1204 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft MS Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 1.06" HES510 HES810 HTS (1.22") 0.59" 0.59" Maximum rotating speed at the cutting tool 0 mm (ø1.18") ø30-0.01 Max. Tool Mounting Depth 1 1.5 (0.26") 1.18" Reduction Ratio (1.44") Xpeed TECHNICAL DATA 4504 PF1/4 90°ANGLE BRUSHLESS MOTOR SPINDLE EMA-3020S HPS PARTS 2 R3.5mm ø15mm HTS 6 CAT. No. Torque Characteristics Graph 90° Angle Brushless Motor Spindle CAT. No. HES810 5 SHEENUS neo SONIC CUTTER E2530 / E2550 HES510 AIR LINE KIT PRESTO II EMA-3020K EMA-3020S ø1.0"/ø0.98" 32,000 min 1758 IMPULSE • Air Hose • Connector Cap (Provided) E2530 / E2550 Maximum allowable motor speed for the spindle CAT. No. ROTUS iSpeed3 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Motor Cord 6M EMCD-3000J-6M Price (6.59") . E3000 - Modular 12.1 ft (3.7m) Fit to ESPERT 1766 EMCD-3000J-8M ø0.897" E3000 - One Piece Motor Cord 4M 0.79" ø1.0"/ø0.98" Maximum rotating speed at the cutting tool 1768 EMCD-3000J-4M Std. Accessories 8.66" 6.69" E2530 / E2550 5.57" 1778 10 ft (3.0m) 1.18" iSpeed3 Maximum allowable motor speed for the spindle (0.43") Length Motor Cord 3M EMCD-3000J-3M 4.7 2" 1 1.5 Description · Model Output (W) 2 Recommended Clamping Area (0.69") Reduction Ratio CAT. No. 1767 1' Quick Disconnect Cord 1.77" Torque (cN m) SHEENUS neo SONIC CUTTER (1.97") PRESTO II 1.22" (3.00") IMPULSE 2.31" ROTUS Max. Tool Mounting Depth 0 mm (ø1.18") ø30-0.01 1.09" ESPERT HPS Rotary Coupling 1' Quick Disconnect Cord 1.77" ø0.31" Recommended Clamping Area (0.43") 5.26" ø0.51" (6.20") -1 21,300 min (rpm) Maximum allowable motor speed for the spindle 32,000 min -1 Maximum rotating speed at the cutting tool 21,300 min -1 (rpm) -1 32,000 min (rpm) 90° Angle Brushless Motor Spindle CAT. No. Model Standard Equipment · Accessories 1758 EMA3020S • Collet ø1/8" (CHSS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 6.1) : 1 pc.each (rpm) • Spindle Accuracy .............................................. Within 3 µm • Max. Output Power .................................................... 280W • Standard Size Collet (CHSS-3.175) ................................ ø1/8" • Weight ........................................................... 1 lb. 5.34 oz. < Optional > • Collet (CHSS-[][]) ................................... ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft Maximum allowable motor speed for the spindle Price An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. * Order by catalog number. 2-p55 2-p40-55_E3000_One_A_1407.qxd 14.8.3 3:23 PM ページ 2-p54 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR SPINDLE Caution : “E3000 SERIES” MOTOR CORD & AIR LINE KIT Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT 1 CAT. No. 1759 90°ANGLE BRUSHLESS MOTOR SPINDLE EMA-3020K MOTOR CORD 1 EmaxEVO EmaxEVO Product Grease Point E2530 / E2550 ø0.63" 21,300 min-1(rpm) ø1.18" 32,000 min-1(rpm) ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" 4 18.7 ft (5.7m) Motor Cord 8M 25.3 ft (7.7m) -1 Maximum rotating speed at the cutting tool 21,300 min -1 (rpm) (rpm) • Spindle Accuracy ............................................... Within 2 µm • Max. Output Power .................................................... 280W • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .......................................................... 1 lb. 10.81 oz. < Optional > • Collet (CHK-[][]) ....................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm CAT. No. 1759 Model EMA3020K Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. • Gear Grease (10 mL) •EMA-3020K, EMA-3020S 14 350 7 8 APPLICATION EXAMPLES INDEX 2-p54 0.79" 9.06" 7.48" AIR LINE KIT AL-C1204 The AL-C1204 Air Line Kit is •designed to deliver clean, dry air 0.79" ø6 mm 12 Note : Motor Cord is sold separately. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. 300 Torque Output 10 250 8 200 6 150 2-ø7mm 100 4 Continuous Duty Area 50 2 to Electric Motors via the Control Unit. The filter removes small amounts of debris while the adjustable regulator provides the correct air pressure for cooling and purging. 2 4 6 8 10 12 14 16 18 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 ø0.897" ø1.0" ø0.98" 4-ø7mm ø1.18" 20 21.3 Speed { x 103 min-1(rpm) } E3000 - Modular MA 0 0 ø0.897" E3000 - One Piece Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) Model 4504 AL-C1204 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft MS Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 1.06" HES510 HES810 HTS (1.22") 0.59" 0.59" Maximum rotating speed at the cutting tool 0 mm (ø1.18") ø30-0.01 Max. Tool Mounting Depth 1 1.5 (0.26") 1.18" Reduction Ratio (1.44") Xpeed TECHNICAL DATA 4504 PF1/4 90°ANGLE BRUSHLESS MOTOR SPINDLE EMA-3020S HPS PARTS 2 R3.5mm ø15mm HTS 6 CAT. No. Torque Characteristics Graph 90° Angle Brushless Motor Spindle CAT. No. HES810 5 SHEENUS neo SONIC CUTTER E2530 / E2550 HES510 AIR LINE KIT PRESTO II EMA-3020K EMA-3020S ø1.0"/ø0.98" 32,000 min 1758 IMPULSE • Air Hose • Connector Cap (Provided) E2530 / E2550 Maximum allowable motor speed for the spindle CAT. No. ROTUS iSpeed3 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Motor Cord 6M EMCD-3000J-6M Price (6.59") . E3000 - Modular 12.1 ft (3.7m) Fit to ESPERT 1766 EMCD-3000J-8M ø0.897" E3000 - One Piece Motor Cord 4M 0.79" ø1.0"/ø0.98" Maximum rotating speed at the cutting tool 1768 EMCD-3000J-4M Std. Accessories 8.66" 6.69" E2530 / E2550 5.57" 1778 10 ft (3.0m) 1.18" iSpeed3 Maximum allowable motor speed for the spindle (0.43") Length Motor Cord 3M EMCD-3000J-3M 4.7 2" 1 1.5 Description · Model Output (W) 2 Recommended Clamping Area (0.69") Reduction Ratio CAT. No. 1767 1' Quick Disconnect Cord 1.77" Torque (cN m) SHEENUS neo SONIC CUTTER (1.97") PRESTO II 1.22" (3.00") IMPULSE 2.31" ROTUS Max. Tool Mounting Depth 0 mm (ø1.18") ø30-0.01 1.09" ESPERT HPS Rotary Coupling 1' Quick Disconnect Cord 1.77" ø0.31" Recommended Clamping Area (0.43") 5.26" ø0.51" (6.20") -1 21,300 min (rpm) Maximum allowable motor speed for the spindle 32,000 min -1 Maximum rotating speed at the cutting tool 21,300 min -1 (rpm) -1 32,000 min (rpm) 90° Angle Brushless Motor Spindle CAT. No. Model Standard Equipment · Accessories 1758 EMA3020S • Collet ø1/8" (CHSS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 6.1) : 1 pc.each (rpm) • Spindle Accuracy .............................................. Within 3 µm • Max. Output Power .................................................... 280W • Standard Size Collet (CHSS-3.175) ................................ ø1/8" • Weight ........................................................... 1 lb. 5.34 oz. < Optional > • Collet (CHSS-[][]) ................................... ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Motor Cord ........................ Length 10 ft, 12.1 ft, 18.7 ft, 25.3 ft Maximum allowable motor speed for the spindle Price An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Note : Motor Cord is sold separately. * Order by catalog number. 2-p55 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p56 BRUSHLESS MOTOR & SPINDLE E3000 SERIES Modular Type “E3000 SERIES” CONTROL UNIT ø1.18" (ø30 mm) for international operation • AC100-240V 1,000~60,000 min (rpm) • Maximum Output 350W • ø0.79"(ø20 mm), ø0.897"(ø22.8 mm), ø0.98"(ø25 mm), ø1.0"(ø25.4 mm), ø1.18"(ø30 mm) spindles are available. • min (rpm) • Maximum Output 350W • Auto or Manual Control Modes. • 1,000~60,000 Can be installed on Special-Purpose Machines, NC Lathes, Robots, etc. • Motor speed is displayed accurately on the front panel. • -1 -1 1 ESPERT ROTUS CONTROL UNIT NE211 60,000 min-1(rpm) 3.46" • Interchangeable with a variety of attachments depending on the application. ESPERT LOAD •••••• PRESTO II Grindstone Flange EGF-19 [2] Running LED (RUN) ROTUS [3] Warning LED (WARNING) IMPULSE [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload Spindle NR-3060S PRESTO II [5] Error Reset Switch (RESET) [6] Gear Setting Switch (GEAR) [7] Control Switch (AUTO/MANUAL) [8] Rotating Direction Selector Switch (FWD./REV.) 2 iSpeed3 [10] Motor Speed Adjustment Switch (SPEED) External Input-Output Connector A (D-SUB25 Female) E2530 / E2550 [11] Display iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece Collet Nut Collet K-265 CHK-[][] 90º Angle Spindle RAS-151E (1/2.67) Brushless Motor EM-3060 E3000 - Modular ø1.18" Arbor for Metal Saw KCH-03 E3000 - 80,000rpm E4000 Grindstone Arbor AGM-03 3 Brushless Motor Motor Cord (Cord with Quick Disconnect) EM-3060J EMCD-3000JEM-3060J-2M 3M/4M/6M/8M *2 Speed Reducer ARG-021E (1 / 16) Collet CH8-[][] 90º Angle Spindle RA-151E (1/2.67) MS required for increasing torque. (1/OO ) indicates reduction ratio. [7] [8] 3 [9] MA Communication Connector for NE212 Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions Intake with Power Fuse ø0.897" : NE211 : AC120V : 1,000-60,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" 9775 120V Air Line Kit AL-C1204 Collet CHR-[][]RS *Clean dry air is required. Selector Unit NE212 Page 2-p47 one motor can be *Only operated at a time. No simultaneous operation. Collet CHB-[][] Automatic Tool Replacement Spindle NR40-5100 ATC Model Price Standard Equipment · Accessories 8 Lever Type Spindle NRR-3060 (B type) NE211 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Compressor • Plug Type (A type) Open and Close Lever HPS Interface Cable Page 2-p68 Main Usable Area For Japan 5 AIR LINE KIT 6 PARTS Product Plug Type For 200V (C type) Main Usable Area Product 7 Without Plug TECHNICAL DATA 8 Motor Cord is Sold Separately. *1 : Motor Cord EMCD-3000A-4M/6M/8M (90º Angle Type) is available. Please see for 2-p58. Collet Nut Collet K-265 CHK-[][] HTS Power Source Plug Open and Close Lever APPLICATION EXAMPLES Collet Nut Collet CHN-A CHA-[][] 120V • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type and order accordingly. For 100V Collet CHB-[][] MS Xpeed Control Unit NE211 AIR LINE KIT 7 ø1.18" HES810 Automatic Tool Replacement Spindle NR50-5100 ATC PARTS ø1.0" ø0.98" 4 Plug Type Collet CHR-[][] Xpeed 2-p56 Power Switch CAT. No. HPS INDEX [5] [6] E3000 Control Unit Automatic Tool Replacement Spindle NR50-5100 ATC RS ø1.18" ø1.0"/ø0.98" ø0.897" Collet CHS-[][] 5 E3000 - Modular E3000 - 80,000rpm 90º Angle Spindle RA-271E (1/1.5) HTS TECHNICAL DATA [11] E4000 Brushless Motor Motor Cord (Cord with Quick Disconnect) EM-3030J EMCD-3000JEM-3030J-2M 3M/4M/6M/8M *2 Arbor for Metal Saw KCH-02 HES810 6 [10] Specifications 4 HES510 [2] [3] Air Input Joint ø6 mm be connected between *May the motor and the spindle as * ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Motor Connector E3000 - One Piece Air Output Joint ø6 mm 90º Angle Spindle RAX-271E (1/1.5) RAX-71E (1/6) ø0.897" ø0.897" [1] [4] MA ø1.0" ø0.98" Motor Cord EMCD-30004M/6M/8M *1 Speed Reducer ARG-011E (1 / 4) ø1.0"/ø0.98" ø0.897" E2530 / E2550 External Input-Output Connector B (D-SUB15 Female) 9.37" ø0.897" SHEENUS neo SONIC CUTTER 2 [9] Start Switch (START) Spindle NR-453E / NR-403E 1 EmaxEVO [1] Load Meter* * : Load Meter IMPULSE SHEENUS neo SONIC CUTTER 9775 CAT. No. Modular Type ø1.18"(ø30 mm) System Chart EmaxEVO For 120V (B type) For U.S.A. and Canada For 230V (D type) For Europe APPLICATION EXAMPLES INDEX 2 : Motor Cord is Sold Separately. Please see for 2-p59. * Lever Type Spindle NRR3060-QC not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. * Order by catalog number. 2-p57 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p56 BRUSHLESS MOTOR & SPINDLE E3000 SERIES Modular Type “E3000 SERIES” CONTROL UNIT ø1.18" (ø30 mm) for international operation • AC100-240V 1,000~60,000 min (rpm) • Maximum Output 350W • ø0.79"(ø20 mm), ø0.897"(ø22.8 mm), ø0.98"(ø25 mm), ø1.0"(ø25.4 mm), ø1.18"(ø30 mm) spindles are available. • min (rpm) • Maximum Output 350W • Auto or Manual Control Modes. • 1,000~60,000 Can be installed on Special-Purpose Machines, NC Lathes, Robots, etc. • Motor speed is displayed accurately on the front panel. • -1 -1 1 ESPERT ROTUS CONTROL UNIT NE211 60,000 min-1(rpm) 3.46" • Interchangeable with a variety of attachments depending on the application. ESPERT LOAD •••••• PRESTO II Grindstone Flange EGF-19 [2] Running LED (RUN) ROTUS [3] Warning LED (WARNING) IMPULSE [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload Spindle NR-3060S PRESTO II [5] Error Reset Switch (RESET) [6] Gear Setting Switch (GEAR) [7] Control Switch (AUTO/MANUAL) [8] Rotating Direction Selector Switch (FWD./REV.) 2 iSpeed3 [10] Motor Speed Adjustment Switch (SPEED) External Input-Output Connector A (D-SUB25 Female) E2530 / E2550 [11] Display iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece Collet Nut Collet K-265 CHK-[][] 90º Angle Spindle RAS-151E (1/2.67) Brushless Motor EM-3060 E3000 - Modular ø1.18" Arbor for Metal Saw KCH-03 E3000 - 80,000rpm E4000 Grindstone Arbor AGM-03 3 Brushless Motor Motor Cord (Cord with Quick Disconnect) EM-3060J EMCD-3000JEM-3060J-2M 3M/4M/6M/8M *2 Speed Reducer ARG-021E (1 / 16) Collet CH8-[][] 90º Angle Spindle RA-151E (1/2.67) MS required for increasing torque. (1/OO ) indicates reduction ratio. [7] [8] 3 [9] MA Communication Connector for NE212 Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions Intake with Power Fuse ø0.897" : NE211 : AC120V : 1,000-60,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" 9775 120V Air Line Kit AL-C1204 Collet CHR-[][]RS *Clean dry air is required. Selector Unit NE212 Page 2-p47 one motor can be *Only operated at a time. No simultaneous operation. Collet CHB-[][] Automatic Tool Replacement Spindle NR40-5100 ATC Model Price Standard Equipment · Accessories 8 Lever Type Spindle NRR-3060 (B type) NE211 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Compressor • Plug Type (A type) Open and Close Lever HPS Interface Cable Page 2-p68 Main Usable Area For Japan 5 AIR LINE KIT 6 PARTS Product Plug Type For 200V (C type) Main Usable Area Product 7 Without Plug TECHNICAL DATA 8 Motor Cord is Sold Separately. *1 : Motor Cord EMCD-3000A-4M/6M/8M (90º Angle Type) is available. Please see for 2-p58. Collet Nut Collet K-265 CHK-[][] HTS Power Source Plug Open and Close Lever APPLICATION EXAMPLES Collet Nut Collet CHN-A CHA-[][] 120V • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type and order accordingly. For 100V Collet CHB-[][] MS Xpeed Control Unit NE211 AIR LINE KIT 7 ø1.18" HES810 Automatic Tool Replacement Spindle NR50-5100 ATC PARTS ø1.0" ø0.98" 4 Plug Type Collet CHR-[][] Xpeed 2-p56 Power Switch CAT. No. HPS INDEX [5] [6] E3000 Control Unit Automatic Tool Replacement Spindle NR50-5100 ATC RS ø1.18" ø1.0"/ø0.98" ø0.897" Collet CHS-[][] 5 E3000 - Modular E3000 - 80,000rpm 90º Angle Spindle RA-271E (1/1.5) HTS TECHNICAL DATA [11] E4000 Brushless Motor Motor Cord (Cord with Quick Disconnect) EM-3030J EMCD-3000JEM-3030J-2M 3M/4M/6M/8M *2 Arbor for Metal Saw KCH-02 HES810 6 [10] Specifications 4 HES510 [2] [3] Air Input Joint ø6 mm be connected between *May the motor and the spindle as * ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Motor Connector E3000 - One Piece Air Output Joint ø6 mm 90º Angle Spindle RAX-271E (1/1.5) RAX-71E (1/6) ø0.897" ø0.897" [1] [4] MA ø1.0" ø0.98" Motor Cord EMCD-30004M/6M/8M *1 Speed Reducer ARG-011E (1 / 4) ø1.0"/ø0.98" ø0.897" E2530 / E2550 External Input-Output Connector B (D-SUB15 Female) 9.37" ø0.897" SHEENUS neo SONIC CUTTER 2 [9] Start Switch (START) Spindle NR-453E / NR-403E 1 EmaxEVO [1] Load Meter* * : Load Meter IMPULSE SHEENUS neo SONIC CUTTER 9775 CAT. No. Modular Type ø1.18"(ø30 mm) System Chart EmaxEVO For 120V (B type) For U.S.A. and Canada For 230V (D type) For Europe APPLICATION EXAMPLES INDEX 2 : Motor Cord is Sold Separately. Please see for 2-p59. * Lever Type Spindle NRR3060-QC not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. * Order by catalog number. 2-p57 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p58 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR “E3000 SERIES” ø1.18"(ø30 mm) BRUSHLESS MOTOR Caution : 1 EmaxEVO 1597 CAT. No. BRUSHLESS MOTOR EM-3060 60,000 min-1(rpm) Brushless Motor with 6.5 ft (2 m) long quick disconnect cord can not used with EMCD-3000J-8M. BRUSHLESS MOTOR EM-3060J 60,000 min-1(rpm) ESPERT ESPERT 3.80" 3.68" ø30-00.02mm (ø1.18") IMPULSE PRESTO II SHEENUS neo SONIC CUTTER ROTUS IMPULSE ø30-00.02mm (ø1.18") ROTUS PRESTO II 1' / 12.1' E2530 / E2550 ø0.897" Cord is sold separately. Note : Motor Please select a cord from the list below. E3000 - One Piece E3000 - Modular Motor Cord EMCD-3000J-3M / 4M / 6M / 8M on page 2-p59 can not used for this motor. ø1.18" CAT. No. E3000 - 80,000rpm ø1.18" 350 7 350 6 300 6 300 Output 250 Output 5 250 . 200 3 150 100 2 100 50 1 200 3 150 2 Continuous Duty Area 4 HES510 0 10 20 30 40 50 Xpeed 5 (1.37") (0.51") AIR LINE KIT Description · Model Length 1748 Motor Cord 4M EMCD-3000-4M 13 ft 1749 Motor Cord 6M EMCD-3000-6M 19 ft 1750 Motor Cord 8M EMCD-3000-8M 26 ft Std. Accessories • Air Hose • Connector Cap (Provided) Fit to Price Price Product MA ø0.897" ø1.0" ø0.98" • Wrench (22 x 27) : 1 pc. ø1.18" *EMCD-3000J-8M (25.3 ft / 8m long) can not be used for this motor. 60 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Description · Model Length 1778 EMCD-3000J-3M Motor Cord 3M 10 ft (3.0m) Motor Cord 4M EMCD-3000J-4M 12.1 ft (3.7m) Motor Cord 6M 18.7 ft (5.7m) CAT. No. Motor Cord 8M 25.3 ft (7.7m) Std. Accessories Fit to Price HES810 HTS HPS • Air Hose • Connector Cap (Provided) EM-3060J EM-3060J-2M Xpeed 5 AIR LINE KIT EM-3060J 6 PARTS MOTOR CORD 90° Angle Type Product 0.70" 0.59" 7 CAT. No. Description · Model Length 1744 Motor Cord 4M EMCD-3000A-4M 13 ft APPLICATION EXAMPLES Motor Cord 6M 1743 EMCD-3000A-6M 19 ft Motor Cord 8M EMCD-3000A-8M 26 ft 1742 2-p58 50 1766 EMCD-3000J-8M TECHNICAL DATA INDEX 40 1767 EMCD-3000J-6M PARTS 8 30 1768 EM-3060 6 7 20 ø1.0"/ø0.98" ø0.897" 3 Standard Equipment · Accessories MOTOR CORD CAT. No. HTS HPS 10 ø0.897" E3000 - One Piece E4000 Speed { x 103 min-1(rpm) } MOTOR CORD Straight Type Product 1779 EM-3060J2M 0 0 60 Speed { x 103 min-1(rpm) } HES810 CAT. No. ø1.0"/ø0.98" E2530 / E2550 E3000 - 80,000rpm • Wrench (22 x 27) : 1 pc. Brushless Motor with 12.1 ft Cord 50 0 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Price 400 Model E2530 / E2550 ø1.18" Standard Equipment · Accessories 450 Torque 4 4 Continuous Duty Area Torque (cN m) 7 5 Model iSpeed3 E3000 - Modular Brushless Motor with 1 ft Cord 1765 EM-3060J 8 2 • Motor Speed .................................... 1,000~60,000 min-1(rpm) • Max. Output Power .................................................... 350W • Housing .......................................... Stainless steel (SUS416) • Weight ..................................................... 12.70 oz. (w/o Cord) CAT. No. • Wrench (22 x 27) : 1 pc. Output (W) . Price 9 Torque 1 MS Standard Equipment · Accessories 400 8 Torque (cN m) ø1.0" ø0.98" EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M / 8M on page 2-p58 can not used for this motor. 450 9 3 ø0.897" Model 1597 EM-3060 E4000 Cord is sold separately. Note : Motor Please select a cord from the list below. Brushless Motor ø1.0"/ø0.98" ø0.897" MA • Motor Speed .................................... 5,000~60,000 min-1(rpm) • Max. Output Power .................................................... 350W • Housing .......................................... Stainless steel (SUS416) • Weight ..................................................... 11.46 oz. (w/o Cord) Output (W) iSpeed3 ø1.0"/ø0.98" SHEENUS neo SONIC CUTTER Quick Disconnect Cord 2 E2530 / E2550 1 EmaxEVO Std. Accessories Fit to Price TECHNICAL DATA 8 • Air Hose • Connector Cap (Provided) APPLICATION EXAMPLES EM-3060 INDEX * Order by catalog number. 2-p59 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p58 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR “E3000 SERIES” ø1.18"(ø30 mm) BRUSHLESS MOTOR Caution : 1 EmaxEVO 1597 CAT. No. BRUSHLESS MOTOR EM-3060 60,000 min-1(rpm) Brushless Motor with 6.5 ft (2 m) long quick disconnect cord can not used with EMCD-3000J-8M. BRUSHLESS MOTOR EM-3060J 60,000 min-1(rpm) ESPERT ESPERT 3.80" 3.68" ø30-00.02mm (ø1.18") IMPULSE PRESTO II SHEENUS neo SONIC CUTTER ROTUS IMPULSE ø30-00.02mm (ø1.18") ROTUS PRESTO II 1' / 12.1' E2530 / E2550 ø0.897" Cord is sold separately. Note : Motor Please select a cord from the list below. E3000 - One Piece E3000 - Modular Motor Cord EMCD-3000J-3M / 4M / 6M / 8M on page 2-p59 can not used for this motor. ø1.18" CAT. No. E3000 - 80,000rpm ø1.18" 350 7 350 6 300 6 300 Output 250 Output 5 250 . 200 3 150 100 2 100 50 1 200 3 150 2 Continuous Duty Area 4 HES510 0 10 20 30 40 50 Xpeed 5 (1.37") (0.51") AIR LINE KIT Description · Model Length 1748 Motor Cord 4M EMCD-3000-4M 13 ft 1749 Motor Cord 6M EMCD-3000-6M 19 ft 1750 Motor Cord 8M EMCD-3000-8M 26 ft Std. Accessories • Air Hose • Connector Cap (Provided) Fit to Price Price Product MA ø0.897" ø1.0" ø0.98" • Wrench (22 x 27) : 1 pc. ø1.18" *EMCD-3000J-8M (25.3 ft / 8m long) can not be used for this motor. 60 MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Description · Model Length 1778 EMCD-3000J-3M Motor Cord 3M 10 ft (3.0m) Motor Cord 4M EMCD-3000J-4M 12.1 ft (3.7m) Motor Cord 6M 18.7 ft (5.7m) CAT. No. Motor Cord 8M 25.3 ft (7.7m) Std. Accessories Fit to Price HES810 HTS HPS • Air Hose • Connector Cap (Provided) EM-3060J EM-3060J-2M Xpeed 5 AIR LINE KIT EM-3060J 6 PARTS MOTOR CORD 90° Angle Type Product 0.70" 0.59" 7 CAT. No. Description · Model Length 1744 Motor Cord 4M EMCD-3000A-4M 13 ft APPLICATION EXAMPLES Motor Cord 6M 1743 EMCD-3000A-6M 19 ft Motor Cord 8M EMCD-3000A-8M 26 ft 1742 2-p58 50 1766 EMCD-3000J-8M TECHNICAL DATA INDEX 40 1767 EMCD-3000J-6M PARTS 8 30 1768 EM-3060 6 7 20 ø1.0"/ø0.98" ø0.897" 3 Standard Equipment · Accessories MOTOR CORD CAT. No. HTS HPS 10 ø0.897" E3000 - One Piece E4000 Speed { x 103 min-1(rpm) } MOTOR CORD Straight Type Product 1779 EM-3060J2M 0 0 60 Speed { x 103 min-1(rpm) } HES810 CAT. No. ø1.0"/ø0.98" E2530 / E2550 E3000 - 80,000rpm • Wrench (22 x 27) : 1 pc. Brushless Motor with 12.1 ft Cord 50 0 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Price 400 Model E2530 / E2550 ø1.18" Standard Equipment · Accessories 450 Torque 4 4 Continuous Duty Area Torque (cN m) 7 5 Model iSpeed3 E3000 - Modular Brushless Motor with 1 ft Cord 1765 EM-3060J 8 2 • Motor Speed .................................... 1,000~60,000 min-1(rpm) • Max. Output Power .................................................... 350W • Housing .......................................... Stainless steel (SUS416) • Weight ..................................................... 12.70 oz. (w/o Cord) CAT. No. • Wrench (22 x 27) : 1 pc. Output (W) . Price 9 Torque 1 MS Standard Equipment · Accessories 400 8 Torque (cN m) ø1.0" ø0.98" EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M / 8M on page 2-p58 can not used for this motor. 450 9 3 ø0.897" Model 1597 EM-3060 E4000 Cord is sold separately. Note : Motor Please select a cord from the list below. Brushless Motor ø1.0"/ø0.98" ø0.897" MA • Motor Speed .................................... 5,000~60,000 min-1(rpm) • Max. Output Power .................................................... 350W • Housing .......................................... Stainless steel (SUS416) • Weight ..................................................... 11.46 oz. (w/o Cord) Output (W) iSpeed3 ø1.0"/ø0.98" SHEENUS neo SONIC CUTTER Quick Disconnect Cord 2 E2530 / E2550 1 EmaxEVO Std. Accessories Fit to Price TECHNICAL DATA 8 • Air Hose • Connector Cap (Provided) APPLICATION EXAMPLES EM-3060 INDEX * Order by catalog number. 2-p59 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p60 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR Caution : “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE E3000 Series can be used in conjunction with water or oil based coolants. Brushless Motor with 6.5 ft (2 m) long quick disconnect cord can not used with EMCD-3000J-8M. COOLANT *Do not exceed the allowable motor speed for the spindle. 1 BRUSHLESS MOTOR EM-3030J EmaxEVO ROTUS IMPULSE • • 1583 EM-3030J has a 32,000 min-1(rpm) max. This motors intended design is for use with NAKANISHI angle spindles such as : RAX-271E / 71E, RA-271E, RAS-151E and RA-151E. These spindles have a 20,000-30,000 min-1(rpm) max. input speed. EM-3030J is designed for high performance (power and torque) at a lower rpm. SPINDLE NR-3060S (Ceramic Bearing) (1.97") Max. Tool Mounting Depth (0.69") 2.12" 3.80" ø30-00.02mm (ø1.18") SHEENUS neo SONIC CUTTER 0 ø30-0.01 mm (ø1.18") PRESTO II 2 ø0.63" ESPERT 32,000 min-1(rpm) CAT. No. 0.79" 1' / 12.1' iSpeed3 Recommended Clamping Area Quick Disconnect Cord E2530 / E2550 1.33" ø1.0"/ø0.98" ø0.897" Motor Cord is sold separately. Please select a cord from the list below. ø1.18" EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M / 8M on page 2-p58 can not used for this motor. E3000 - 80,000rpm CAT. No. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" . Price 300 Output 5 250 4 200 150 3 CAT. No. Model 1780 EM-3030J2M 100 2 Standard Equipment · Accessories Price • Wrench (22 x 27) : 1 pc. Continuous Duty Area 50 1 * EMCD-3000J-8M (25.3 ft / 8m long) can not be used for this motor. 0 10 20 30 32 (1.97") Max. Tool Mounting Depth (0.69") 3.94" 0.79" Speed { x 103 min-1(rpm) } 4 2.17" Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 1583 NR-3060S MOTOR CORD Product • CAT. No. Description · Model Length 1778 Motor Cord 3M EMCD-3000J-3M 10 ft (3.0m) 1768 Motor Cord 4M EMCD-3000J-4M 12.1 ft (3.7m) 1767 Motor Cord 6M EMCD-3000J-6M 18.7 ft (5.7m) Motor Cord 8M 25.3 ft (7.7m) 1766 EMCD-3000J-8M Std. Accessories Fit to Price This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø0.897" • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. E3000 - Modular 50,000 min-1(rpm) • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm Model ASE1566 NR-453E Price Standard Equipment · Accessories E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. HTS HPS Xpeed CAT. No. • Air Hose • Connector Cap (Provided) EM-3030J EM-3030J-2M EM-3030J APPLICATION EXAMPLES ASE1514 SPINDLE NR-403E (0.69") 40,000 min (rpm) -1 3.94" • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. 2.17" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm (1.97") Max. Tool Mounting Depth 0.79" Recommended Clamping Area INDEX • This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Spindle CAT. No. 2-p60 PRESTO II ø1.18" CAT. No. ø0.63" HPS IMPULSE E3000 - One Piece Spindle 0 ø30-0.01 mm (ø1.18") HTS ROTUS ø1.0"/ø0.98" Price Standard Equipment · Accessories Recommended Clamping Area HES510 HES810 ESPERT E2530 / E2550 Model ASE1566 SPINDLE NR-453E (Ceramic Bearing) • Wrench (22 x 27) : 1 pc. Brushless Motor with 12.1 ft Cord 350 6 0 CAT. No. 400 Torque Output (W) 7 Torque (cN m) 8 ø0.897" Standard Equipment · Accessories 450 9 MS Model 1769 EM-3030J 3 MA spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. 1 EmaxEVO ø1.0"/ø0.98" ø0.897" Brushless Motor with 1 ft Cord E4000 ø1.18" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) .......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm CAT. No. ø0.63" ø1.0"/ø0.98" ø0.897" • Motor Speed .................................... 1,000~32,000 min-1(rpm) • Max. Output Power .................................................... 280W • Housing .......................................... Stainless steel (SUS416) • Weight ..................................................... 12.70 oz. (w/o Cord) 0 ø30-0.01 mm (ø1.18") Note : E3000 - Modular ø1.0" ø0.98" • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 9.52 oz. Spindle E2530 / E2550 E3000 - One Piece 60,000 min-1(rpm) Model ASE1514 NR-403E Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. * Order by catalog number. 2-p61 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p60 “E3000 SERIES” ø1.18" (ø30 mm) BRUSHLESS MOTOR Caution : “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE E3000 Series can be used in conjunction with water or oil based coolants. Brushless Motor with 6.5 ft (2 m) long quick disconnect cord can not used with EMCD-3000J-8M. COOLANT *Do not exceed the allowable motor speed for the spindle. 1 BRUSHLESS MOTOR EM-3030J EmaxEVO ROTUS IMPULSE • • 1583 EM-3030J has a 32,000 min-1(rpm) max. This motors intended design is for use with NAKANISHI angle spindles such as : RAX-271E / 71E, RA-271E, RAS-151E and RA-151E. These spindles have a 20,000-30,000 min-1(rpm) max. input speed. EM-3030J is designed for high performance (power and torque) at a lower rpm. SPINDLE NR-3060S (Ceramic Bearing) (1.97") Max. Tool Mounting Depth (0.69") 2.12" 3.80" ø30-00.02mm (ø1.18") SHEENUS neo SONIC CUTTER 0 ø30-0.01 mm (ø1.18") PRESTO II 2 ø0.63" ESPERT 32,000 min-1(rpm) CAT. No. 0.79" 1' / 12.1' iSpeed3 Recommended Clamping Area Quick Disconnect Cord E2530 / E2550 1.33" ø1.0"/ø0.98" ø0.897" Motor Cord is sold separately. Please select a cord from the list below. ø1.18" EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M / 8M on page 2-p58 can not used for this motor. E3000 - 80,000rpm CAT. No. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" . Price 300 Output 5 250 4 200 150 3 CAT. No. Model 1780 EM-3030J2M 100 2 Standard Equipment · Accessories Price • Wrench (22 x 27) : 1 pc. Continuous Duty Area 50 1 * EMCD-3000J-8M (25.3 ft / 8m long) can not be used for this motor. 0 10 20 30 32 (1.97") Max. Tool Mounting Depth (0.69") 3.94" 0.79" Speed { x 103 min-1(rpm) } 4 2.17" Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 1583 NR-3060S MOTOR CORD Product • CAT. No. Description · Model Length 1778 Motor Cord 3M EMCD-3000J-3M 10 ft (3.0m) 1768 Motor Cord 4M EMCD-3000J-4M 12.1 ft (3.7m) 1767 Motor Cord 6M EMCD-3000J-6M 18.7 ft (5.7m) Motor Cord 8M 25.3 ft (7.7m) 1766 EMCD-3000J-8M Std. Accessories Fit to Price This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø0.897" • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. E3000 - Modular 50,000 min-1(rpm) • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm Model ASE1566 NR-453E Price Standard Equipment · Accessories E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. HTS HPS Xpeed CAT. No. • Air Hose • Connector Cap (Provided) EM-3030J EM-3030J-2M EM-3030J APPLICATION EXAMPLES ASE1514 SPINDLE NR-403E (0.69") 40,000 min (rpm) -1 3.94" • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. 2.17" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm (1.97") Max. Tool Mounting Depth 0.79" Recommended Clamping Area INDEX • This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Spindle CAT. No. 2-p60 PRESTO II ø1.18" CAT. No. ø0.63" HPS IMPULSE E3000 - One Piece Spindle 0 ø30-0.01 mm (ø1.18") HTS ROTUS ø1.0"/ø0.98" Price Standard Equipment · Accessories Recommended Clamping Area HES510 HES810 ESPERT E2530 / E2550 Model ASE1566 SPINDLE NR-453E (Ceramic Bearing) • Wrench (22 x 27) : 1 pc. Brushless Motor with 12.1 ft Cord 350 6 0 CAT. No. 400 Torque Output (W) 7 Torque (cN m) 8 ø0.897" Standard Equipment · Accessories 450 9 MS Model 1769 EM-3030J 3 MA spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. 1 EmaxEVO ø1.0"/ø0.98" ø0.897" Brushless Motor with 1 ft Cord E4000 ø1.18" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) .......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm CAT. No. ø0.63" ø1.0"/ø0.98" ø0.897" • Motor Speed .................................... 1,000~32,000 min-1(rpm) • Max. Output Power .................................................... 280W • Housing .......................................... Stainless steel (SUS416) • Weight ..................................................... 12.70 oz. (w/o Cord) 0 ø30-0.01 mm (ø1.18") Note : E3000 - Modular ø1.0" ø0.98" • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 9.52 oz. Spindle E2530 / E2550 E3000 - One Piece 60,000 min-1(rpm) Model ASE1514 NR-403E Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. * Order by catalog number. 2-p61 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p62 “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Caution : COOLANT ASE1559 90°ANGLE SPINDLE RAS-151E CAT. No. PRESTO II SHEENUS neo SONIC CUTTER 0.80" 2 1.10" 2.06" Maximum rotating speed at the cutting tool 7,490 min-1(rpm) E2530 / E2550 Reduction Ratio 1 2.67 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm 3.41" (1.48") ø0.90" EmaxEVO ESPERT Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) Recommended Clamping Area Reduction Ratio ø0.35" 1 2.67 Maximum rotating speed at the cutting tool • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight ................................................................ 13.58 oz. < Optional > • Collet (CH8-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) Type Spindle can use up to a ø1/4"(ø6.35 mm) collet and •90˚Angle is suitable for installation where space restrictions exist. 2 iSpeed3 20,000 min-1(rpm) E2530 / E2550 ø1.0"/ø0.98" ø0.897" 7,490 min-1(rpm) CAT. No. E3000 - One Piece Model Standard Equipment · Accessories Price E3000 - Modular ø1.18" 90˚ Angle Spindle CAT. No. E3000 - 80,000rpm SHEENUS neo SONIC CUTTER E2530 / E2550 0 -0.01 ø1.0"/ø0.98" ø0.897" IMPULSE Maximum allowable motor speed for the spindle 90˚ Angle Spindle ø30 mm (ø1.18") ROTUS PRESTO II 20,000 min-1(rpm) ø1.18" 3 -1 Maximum allowable motor speed for the spindle E3000 - Modular E4000 20,000 min • Spindle Accuracy ............................................... Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 11.46 oz. Recommended Clamping Area iSpeed3 Maximum allowable motor speed for the spindle 0 ø30-0.01 mm (ø1.18") 0.55" 0 ø23-0.01 mm (ø0.19") IMPULSE (1.97") Max. Tool Mounting Depth 0.67" 2.95" 1.58" ROTUS 0.79" ø0.63" ESPERT 1 ASE1505 90°ANGLE SPINDLE RA-151E 0.32" CAT. No. COOLANT (1.26" ) Max. Tool Mounting Depth 1 EmaxEVO Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Model ASE1559 RAS-151E Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • This spindle is capable of working on corners difficult to work or unfit for working with straight type, drilling on side face and, slitting of aluminum, brass, etc. with the use of ø1.18"(ø30 mm) Metal Saw. ASE1505 RA-151E • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (22 x 27) : 1 pc. each ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" 4 Maximum rotating speed at the cutting tool RAX-271E RAX-71E HES510 3.23" ø1.18" HES810 0.79" 1.38" HTS 6 PARTS 7 TECHNICAL DATA 8 ø0.63" 0 ø30-0.01 mm (ø1.18") 1.22" 5 AIR LINE KIT 2.32" Xpeed (0.69") HPS (1.96") Max. Tool Mounting Depth Recommended Clamping Area Grease Point 0.35" Reduction Ratio 1/1.5 1/6 (RAX-271E) (RAX-71E) Maximum allowable motor speed for the spindle 30,000 min-1(rpm) Maximum rotating speed at the cutting tool 5,000 min-1(rpm) (RAX-71E) INDEX spindle is capable of working on corners difficult to work with •This straight type, drilling on side faces and milling of grooves. 2-p62 (rpm) -1 (rpm) -1 90˚ Angle Spindle Model ASE1579 RAX-271E ASE1576 RAX-71E APPLICATION EXAMPLES 20,000 min 5,000 min (rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................... 1 lb. 4.46 oz. (RAX-271E) 1 lb. 0.58 oz. (RAX-71E) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm CAT. No. 20,000 min-1(rpm) (RAX-271E) 30,000 min Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. 2.90" ø0.69" 1.77" 1.29" Recommended Clamping Area 0 ø30-0.01 mm (ø1.18") Maximum allowable motor speed for the spindle -1 ASE1506 90°ANGLE SPINDLE RA-271E 0.59" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. (0.26") 1.12" MS ASE1579 90° ANGLE SPINDLE RAX-271E (Speed Reduction Ratio 1/1.5) CAT. 90° ANGLE SPINDLE RAX-71E (Speed Reduction Ratio 1/6) No. ASE1576 CAT. No. (1.22") Max. Tool Mounting Depth ø1.18" Reduction Ratio ø0.31" 1 1.5 Maximum rotating speed at the cutting tool ø1.18" MS Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) .................................. ø1/8" • Weight .................................................................. 8.47 oz. < Optional > • Collet (CHS-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed Maximum allowable motor speed for the spindle 5 20,000 min-1(rpm) AIR LINE KIT -1 13,330 min (rpm) 90˚ Angle Spindle CAT. No. spindle can be used for working on corners difficult to work or •This unfit for working with straight type, drilling on side face, etc. Model ASE1506 RA-271E Standard Equipment · Accessories • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (22 x 27) : 1 pc. each Price 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 2-p63 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:07 PM ページ 2-p62 “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Caution : COOLANT ASE1559 90°ANGLE SPINDLE RAS-151E CAT. No. PRESTO II SHEENUS neo SONIC CUTTER 0.80" 2 1.10" 2.06" Maximum rotating speed at the cutting tool 7,490 min-1(rpm) E2530 / E2550 Reduction Ratio 1 2.67 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm 3.41" (1.48") ø0.90" EmaxEVO ESPERT Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) Recommended Clamping Area Reduction Ratio ø0.35" 1 2.67 Maximum rotating speed at the cutting tool • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight ................................................................ 13.58 oz. < Optional > • Collet (CH8-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) Type Spindle can use up to a ø1/4"(ø6.35 mm) collet and •90˚Angle is suitable for installation where space restrictions exist. 2 iSpeed3 20,000 min-1(rpm) E2530 / E2550 ø1.0"/ø0.98" ø0.897" 7,490 min-1(rpm) CAT. No. E3000 - One Piece Model Standard Equipment · Accessories Price E3000 - Modular ø1.18" 90˚ Angle Spindle CAT. No. E3000 - 80,000rpm SHEENUS neo SONIC CUTTER E2530 / E2550 0 -0.01 ø1.0"/ø0.98" ø0.897" IMPULSE Maximum allowable motor speed for the spindle 90˚ Angle Spindle ø30 mm (ø1.18") ROTUS PRESTO II 20,000 min-1(rpm) ø1.18" 3 -1 Maximum allowable motor speed for the spindle E3000 - Modular E4000 20,000 min • Spindle Accuracy ............................................... Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 11.46 oz. Recommended Clamping Area iSpeed3 Maximum allowable motor speed for the spindle 0 ø30-0.01 mm (ø1.18") 0.55" 0 ø23-0.01 mm (ø0.19") IMPULSE (1.97") Max. Tool Mounting Depth 0.67" 2.95" 1.58" ROTUS 0.79" ø0.63" ESPERT 1 ASE1505 90°ANGLE SPINDLE RA-151E 0.32" CAT. No. COOLANT (1.26" ) Max. Tool Mounting Depth 1 EmaxEVO Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Model ASE1559 RAS-151E Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • This spindle is capable of working on corners difficult to work or unfit for working with straight type, drilling on side face and, slitting of aluminum, brass, etc. with the use of ø1.18"(ø30 mm) Metal Saw. ASE1505 RA-151E • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (22 x 27) : 1 pc. each ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" 4 Maximum rotating speed at the cutting tool RAX-271E RAX-71E HES510 3.23" ø1.18" HES810 0.79" 1.38" HTS 6 PARTS 7 TECHNICAL DATA 8 ø0.63" 0 ø30-0.01 mm (ø1.18") 1.22" 5 AIR LINE KIT 2.32" Xpeed (0.69") HPS (1.96") Max. Tool Mounting Depth Recommended Clamping Area Grease Point 0.35" Reduction Ratio 1/1.5 1/6 (RAX-271E) (RAX-71E) Maximum allowable motor speed for the spindle 30,000 min-1(rpm) Maximum rotating speed at the cutting tool 5,000 min-1(rpm) (RAX-71E) INDEX spindle is capable of working on corners difficult to work with •This straight type, drilling on side faces and milling of grooves. 2-p62 (rpm) -1 (rpm) -1 90˚ Angle Spindle Model ASE1579 RAX-271E ASE1576 RAX-71E APPLICATION EXAMPLES 20,000 min 5,000 min (rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................... 1 lb. 4.46 oz. (RAX-271E) 1 lb. 0.58 oz. (RAX-71E) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm CAT. No. 20,000 min-1(rpm) (RAX-271E) 30,000 min Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. 2.90" ø0.69" 1.77" 1.29" Recommended Clamping Area 0 ø30-0.01 mm (ø1.18") Maximum allowable motor speed for the spindle -1 ASE1506 90°ANGLE SPINDLE RA-271E 0.59" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. (0.26") 1.12" MS ASE1579 90° ANGLE SPINDLE RAX-271E (Speed Reduction Ratio 1/1.5) CAT. 90° ANGLE SPINDLE RAX-71E (Speed Reduction Ratio 1/6) No. ASE1576 CAT. No. (1.22") Max. Tool Mounting Depth ø1.18" Reduction Ratio ø0.31" 1 1.5 Maximum rotating speed at the cutting tool ø1.18" MS Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) .................................. ø1/8" • Weight .................................................................. 8.47 oz. < Optional > • Collet (CHS-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed Maximum allowable motor speed for the spindle 5 20,000 min-1(rpm) AIR LINE KIT -1 13,330 min (rpm) 90˚ Angle Spindle CAT. No. spindle can be used for working on corners difficult to work or •This unfit for working with straight type, drilling on side face, etc. Model ASE1506 RA-271E Standard Equipment · Accessories • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (22 x 27) : 1 pc. each Price 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 2-p63 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p64 “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE COOLANT 0.67" IMPULSE 2 • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Air for Collet Opening ........................................... 80~87PSI • Standard Size Collet (CHR-3.175) ................................. ø1/8" • Weight ........................................................... 3 lb. 0.33 oz. iSpeed3 No wrenches are required for tool changing. 1.00" Exhaust air direction E2530 / E2550 ø1.0"/ø0.98" (0.31") (0.38") E2530 / E2550 Spindle 3.86" ø0.897" E3000 - One Piece E3000 - Modular ø1.18" CAT. No. designed for easy tool replacement. The cutting tool can •beSpecially exchanged automatically by supplying air to the spindle. This high-precision spindle utilizes high precision bearings. LOCK Model 1580 NR50-5100 ATC OPEN Price Standard Equipment · Accessories • Collet ø1/8" (CHR-3.175) • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (9 x 11), (12 x 14) : 1 pc. each • Bar Wrench (K-236) : 1 pc. NRR-3060 Installed Example 60,000 min-1(rpm) • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHB-3.175) ................................. ø1/8" • Weight ................................................................ 12.35 oz. ø1.18" < Optional > • Collet (CHR-[][]) ....... ø2.0, ø3.0 mm, ø1/8", ø4.0, ø6.0 mm, ø1/4" (See Page 6-p4 for details) ø1.42" ø0.62" SHEENUS neo SONIC CUTTER 2.76" Recommended Clamping Area 0 ø50 -0.01 mm (ø1.97") PRESTO II 0.49" LEVER TYPE SPINDLE NRR-3060 < Optional > • Collet (CHB-[][]) ....................... ø2.0, ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) ø0.27" * for ø1/8" tool shank 1836 (1.32") (2.13") Max. Tool Mounting Depth ROTUS 50,000 min-1(rpm) Recommended Clamping Area ESPERT AUTOMATIC TOOL REPLACEMENT SPINDLE NR50-5100 ATC 3.13" 1580 *Do not exceed the allowable motor speed for the spindle. CAT. No. (1.07") Max. Tool Mounting Depth EmaxEVO *Do not exceed the allowable motor speed for the spindle. CAT. No. (0.22") 1 COOLANT Spindle 7690 CAT. No. AUTOMATIC TOOL REPLACEMENT SPINDLE NR50-5100 ATC RS 50,000 min (rpm) -1 (2.13") Max. Tool Mounting Depth * for ø1/8" tool shank 0.67" ø0.897" HPS Xpeed 5 AIR LINE KIT 6 ø1.17" ø0.54" 0 ø50 -0.01 mm (ø1.97") < Optional > • Collet (CHR-[][] RS) ........ ø3.0 mm, ø1/8", ø4.0, ø6.0 mm, ø1/4" (See Page 6-p4 for details) (0.37") Spindle 4.17" Specially designed for easy tool replacement. The cutting tool can be •exchanged automatically by supplying air to the spindle. This highprecision spindle utilizes high precision bearings. Utilizes a sealed collet to prevent powder debris and residue from entering the spindle during dental, circuit board and other non-ferrous material machining. 1582 CAT. No. 0.39" ø0.94" ø0.43" Exhaust air direction INDEX 2.17" Recommended Clamping Area 0 ø40-0.01 mm (ø1.57") 8 APPLICATION EXAMPLES 7690 NR50-5100 ATC RS Standard Equipment · Accessories Price E2530 / E2550 ø0.897" 1836 NRR-3060 • Collet ø1/8" (CHB-3.175) • Wrench (6.1 x 8) : 2 pcs, (22 x 27): 1 pc Exhaust air direction E3000 - One Piece E3000 - Modular ø1.18" E3000 - 80,000rpm ø26.8 mm (ø1.06") ø1.17" E4000 Features: • • Standard Equipment · Accessories Price (0.24") (3.23") 3.54" designed for easy tool replacement. The cutting tool can •beSpecially exchanged automatically by supplying air to the spindle. This high-precision spindle utilizes high precision bearings. 3 New dust protection mechanism design exhausts air sideways. Side exhaust discharge keeps chips from being disbursed away from the machining area. The bottom of the spindle is equipped with an internal thread (M2 x 0.4mm / 3mm long). This enables tool length pre-setting. MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 L 3 mm HES510 HES810 • Collet ø1/8" (CHR-3.175 RS) • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (9 x 11), (12 x 14) : 1 pc. each • Bar Wrench (K-236) : 1 pc. HTS HPS Xpeed 5 AIR LINE KIT 50,000 min-1(rpm) • Allowable Motor Speed ............................... 50,000 min (rpm) • Spindle Accuracy .............................................. Within 2 µm • Air for Collet Opening ........................................... 80~87PSI • Standard Size Collet (CHB-3.175) .................................. ø1/8" • Weight ......................................................... 1 lb. 10.10 oz. < Optional > • Collet (CHB-[][]) ....................... ø2.0, ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Spindle CAT. No. 2-p64 Model -1 0.59" 7 CAT. No. AUTOMATIC TOOL REPLACEMENT SPINDLE NR40-5100 ATC PARTS TECHNICAL DATA SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" Model M2 x 0.4 mm HES510 HTS 2.76" • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Air for Collet Opening ........................................... 80~87PSI • Standard Size Collet (CHR-3.175 RS) ............................. ø1/8" • Weight ........................................................... 3 lb. 0.33 oz. Exhaust air direction 4 HES810 0.49" Recommended Clamping Area ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II ø1.0"/ø0.98" ø0.897" MA MS IMPULSE E2530 / E2550 CAT. No. 0 -0.01 3 ø1.18" ROTUS iSpeed3 Open and Close Lever ø4.05 mm øA E4000 ESPERT 2 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 1 EmaxEVO Model 1582 NR40-5100 ATC Standard Equipment · Accessories Price • Collet ø1/8" (CHB-3.175) • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (6.1 x 8), (9 x 11) : 1 pc. each • Bar Wrench (K-236) : 1 pc. * Order by catalog number. 2-p65 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p64 “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE COOLANT 0.67" IMPULSE 2 • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Air for Collet Opening ........................................... 80~87PSI • Standard Size Collet (CHR-3.175) ................................. ø1/8" • Weight ........................................................... 3 lb. 0.33 oz. iSpeed3 No wrenches are required for tool changing. 1.00" Exhaust air direction E2530 / E2550 ø1.0"/ø0.98" (0.31") (0.38") E2530 / E2550 Spindle 3.86" ø0.897" E3000 - One Piece E3000 - Modular ø1.18" CAT. No. designed for easy tool replacement. The cutting tool can •beSpecially exchanged automatically by supplying air to the spindle. This high-precision spindle utilizes high precision bearings. LOCK Model 1580 NR50-5100 ATC OPEN Price Standard Equipment · Accessories • Collet ø1/8" (CHR-3.175) • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (9 x 11), (12 x 14) : 1 pc. each • Bar Wrench (K-236) : 1 pc. NRR-3060 Installed Example 60,000 min-1(rpm) • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHB-3.175) ................................. ø1/8" • Weight ................................................................ 12.35 oz. ø1.18" < Optional > • Collet (CHR-[][]) ....... ø2.0, ø3.0 mm, ø1/8", ø4.0, ø6.0 mm, ø1/4" (See Page 6-p4 for details) ø1.42" ø0.62" SHEENUS neo SONIC CUTTER 2.76" Recommended Clamping Area 0 ø50 -0.01 mm (ø1.97") PRESTO II 0.49" LEVER TYPE SPINDLE NRR-3060 < Optional > • Collet (CHB-[][]) ....................... ø2.0, ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) ø0.27" * for ø1/8" tool shank 1836 (1.32") (2.13") Max. Tool Mounting Depth ROTUS 50,000 min-1(rpm) Recommended Clamping Area ESPERT AUTOMATIC TOOL REPLACEMENT SPINDLE NR50-5100 ATC 3.13" 1580 *Do not exceed the allowable motor speed for the spindle. CAT. No. (1.07") Max. Tool Mounting Depth EmaxEVO *Do not exceed the allowable motor speed for the spindle. CAT. No. (0.22") 1 COOLANT Spindle 7690 CAT. No. AUTOMATIC TOOL REPLACEMENT SPINDLE NR50-5100 ATC RS 50,000 min (rpm) -1 (2.13") Max. Tool Mounting Depth * for ø1/8" tool shank 0.67" ø0.897" HPS Xpeed 5 AIR LINE KIT 6 ø1.17" ø0.54" 0 ø50 -0.01 mm (ø1.97") < Optional > • Collet (CHR-[][] RS) ........ ø3.0 mm, ø1/8", ø4.0, ø6.0 mm, ø1/4" (See Page 6-p4 for details) (0.37") Spindle 4.17" Specially designed for easy tool replacement. The cutting tool can be •exchanged automatically by supplying air to the spindle. This highprecision spindle utilizes high precision bearings. Utilizes a sealed collet to prevent powder debris and residue from entering the spindle during dental, circuit board and other non-ferrous material machining. 1582 CAT. No. 0.39" ø0.94" ø0.43" Exhaust air direction INDEX 2.17" Recommended Clamping Area 0 ø40-0.01 mm (ø1.57") 8 APPLICATION EXAMPLES 7690 NR50-5100 ATC RS Standard Equipment · Accessories Price E2530 / E2550 ø0.897" 1836 NRR-3060 • Collet ø1/8" (CHB-3.175) • Wrench (6.1 x 8) : 2 pcs, (22 x 27): 1 pc Exhaust air direction E3000 - One Piece E3000 - Modular ø1.18" E3000 - 80,000rpm ø26.8 mm (ø1.06") ø1.17" E4000 Features: • • Standard Equipment · Accessories Price (0.24") (3.23") 3.54" designed for easy tool replacement. The cutting tool can •beSpecially exchanged automatically by supplying air to the spindle. This high-precision spindle utilizes high precision bearings. 3 New dust protection mechanism design exhausts air sideways. Side exhaust discharge keeps chips from being disbursed away from the machining area. The bottom of the spindle is equipped with an internal thread (M2 x 0.4mm / 3mm long). This enables tool length pre-setting. MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 L 3 mm HES510 HES810 • Collet ø1/8" (CHR-3.175 RS) • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (9 x 11), (12 x 14) : 1 pc. each • Bar Wrench (K-236) : 1 pc. HTS HPS Xpeed 5 AIR LINE KIT 50,000 min-1(rpm) • Allowable Motor Speed ............................... 50,000 min (rpm) • Spindle Accuracy .............................................. Within 2 µm • Air for Collet Opening ........................................... 80~87PSI • Standard Size Collet (CHB-3.175) .................................. ø1/8" • Weight ......................................................... 1 lb. 10.10 oz. < Optional > • Collet (CHB-[][]) ....................... ø2.0, ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Spindle CAT. No. 2-p64 Model -1 0.59" 7 CAT. No. AUTOMATIC TOOL REPLACEMENT SPINDLE NR40-5100 ATC PARTS TECHNICAL DATA SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" Model M2 x 0.4 mm HES510 HTS 2.76" • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Air for Collet Opening ........................................... 80~87PSI • Standard Size Collet (CHR-3.175 RS) ............................. ø1/8" • Weight ........................................................... 3 lb. 0.33 oz. Exhaust air direction 4 HES810 0.49" Recommended Clamping Area ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II ø1.0"/ø0.98" ø0.897" MA MS IMPULSE E2530 / E2550 CAT. No. 0 -0.01 3 ø1.18" ROTUS iSpeed3 Open and Close Lever ø4.05 mm øA E4000 ESPERT 2 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 1 EmaxEVO Model 1582 NR40-5100 ATC Standard Equipment · Accessories Price • Collet ø1/8" (CHB-3.175) • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (6.1 x 8), (9 x 11) : 1 pc. each • Bar Wrench (K-236) : 1 pc. * Order by catalog number. 2-p65 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p66 “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE COOLANT 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 *Do not exceed the allowable motor speed for the spindle. CAT. No. 9208 QUICK CHANGE SPINDLE NRR3060-QC 60,000 min-1(rpm) CAT. No. 9211 Features: • • • • Quick, easy and accurate tool change without the need for wrenches. Collet Holder •QC3-K •QC3-A Loosen Makes tool pre-setting outside of the machine possible. 2 collet styles available (CHA or CHK) depending on QC3 Model. Collet Holder •QC3-K / •QC3-A 1 PRESET ADAPTER Tighten EmaxEVO the tool holder into the Preset Adapter. •Insert Align the tool holder with the drive dog notches in the •Preset Adapter. Attached the Collet Nut and Collet to the tool holder. •Lightly finger tighten the Collet Nut. the cutting tool into the Collet. •Insert Place the wrenches on the Collet Nut and Collet Holder and •securely tighten in a clockwise direction. ø1.0"/ø0.98" ø0.897" Preset Adapter E3000 - One Piece • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Weight ........................................................... 1 lb. 4.11 oz. E3000 - Modular ø1.18" (2.36") ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 QC3-A holder QC3-K holder 3 < Optional > • Collet Holder .......................................................... QC3-K • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .......................................... for Collet (CHK) (1.18") (1.38") ø1.50" ø1.18" ø0.63" 0 ø30 -0.01 mm (ø1.18") Max. Tool Mounting Depth ø1.18" (1.39") ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E2530 / E2550 ø0.897" MS PRESTO II E2530 / E2550 E2530 / E2550 ø1.0" ø0.98" IMPULSE iSpeed3 Preset Adapter •QC3-ADP ø1.0"/ø0.98" ø0.897" ROTUS 2 10 times the retention force as compared to the NRR-2651. E2530 / E2550 MA ESPERT photo: •QC3-K < Optional > • Collet Holder .......................................................... QC3-A • Collet (CHA-[][]) ....................................... ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Collet Nut (CHN-A) ........................................ for Collet (CHA) Recommended Clamping Area 0.04"-0.06" (0.84") (2.17") (0.11") 1.17" Quick Change Spindle 0.79" CAT. No. 4.13" Model 9208 NRR3060QC 4 Standard Equipment · Accessories Price CAT. No. Model 9211 QC3ADP Standard Equipment · Accessories Price E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 • Wrench (22 x 27) : 1 pc. HES510 HES510 HES810 HES810 The Collet Holder with Collet Nut, and Collet Note : are sold separately. HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 7 TECHNICAL DATA COLLET HOLDER Product Taper Shank Tools and Collet Nut CAT. No. Model Collet 9210 • QC3-K CHK Std. Accessories • Collet Nut (K-265) : 1 pc. 6 Attaches to NRR3060-QC Price PARTS 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX 2-p66 9209 • QC3-A CHA • Collet Nut (CHN-A) : 1 pc. NRR3060-QC INDEX * Order by catalog number. 2-p67 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p66 “E3000 SERIES” ø1.18" (ø30 mm) SPINDLE COOLANT 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 *Do not exceed the allowable motor speed for the spindle. CAT. No. 9208 QUICK CHANGE SPINDLE NRR3060-QC 60,000 min-1(rpm) CAT. No. 9211 Features: • • • • Quick, easy and accurate tool change without the need for wrenches. Collet Holder •QC3-K •QC3-A Loosen Makes tool pre-setting outside of the machine possible. 2 collet styles available (CHA or CHK) depending on QC3 Model. Collet Holder •QC3-K / •QC3-A 1 PRESET ADAPTER Tighten EmaxEVO the tool holder into the Preset Adapter. •Insert Align the tool holder with the drive dog notches in the •Preset Adapter. Attached the Collet Nut and Collet to the tool holder. •Lightly finger tighten the Collet Nut. the cutting tool into the Collet. •Insert Place the wrenches on the Collet Nut and Collet Holder and •securely tighten in a clockwise direction. ø1.0"/ø0.98" ø0.897" Preset Adapter E3000 - One Piece • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Weight ........................................................... 1 lb. 4.11 oz. E3000 - Modular ø1.18" (2.36") ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 QC3-A holder QC3-K holder 3 < Optional > • Collet Holder .......................................................... QC3-K • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .......................................... for Collet (CHK) (1.18") (1.38") ø1.50" ø1.18" ø0.63" 0 ø30 -0.01 mm (ø1.18") Max. Tool Mounting Depth ø1.18" (1.39") ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E2530 / E2550 ø0.897" MS PRESTO II E2530 / E2550 E2530 / E2550 ø1.0" ø0.98" IMPULSE iSpeed3 Preset Adapter •QC3-ADP ø1.0"/ø0.98" ø0.897" ROTUS 2 10 times the retention force as compared to the NRR-2651. E2530 / E2550 MA ESPERT photo: •QC3-K < Optional > • Collet Holder .......................................................... QC3-A • Collet (CHA-[][]) ....................................... ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Collet Nut (CHN-A) ........................................ for Collet (CHA) Recommended Clamping Area 0.04"-0.06" (0.84") (2.17") (0.11") 1.17" Quick Change Spindle 0.79" CAT. No. 4.13" Model 9208 NRR3060QC 4 Standard Equipment · Accessories Price CAT. No. Model 9211 QC3ADP Standard Equipment · Accessories Price E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 • Wrench (22 x 27) : 1 pc. HES510 HES510 HES810 HES810 The Collet Holder with Collet Nut, and Collet Note : are sold separately. HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 7 TECHNICAL DATA COLLET HOLDER Product Taper Shank Tools and Collet Nut CAT. No. Model Collet 9210 • QC3-K CHK Std. Accessories • Collet Nut (K-265) : 1 pc. 6 Attaches to NRR3060-QC Price PARTS 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX 2-p66 9209 • QC3-A CHA • Collet Nut (CHN-A) : 1 pc. NRR3060-QC INDEX * Order by catalog number. 2-p67 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p68 “E3000 SERIES” ø1.18" (ø30 mm) SPEED REDUCER CAT. No. ASE1507 SPEED REDUCER 1/4 ARG-011E CAT. No. ESPERT Maximum allowable motor speed 2.09" ROTUS Maximum rotating speed at the cutting tool 0 ø30-0.01 mm (ø1.18") IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Grease Point Maximum rotating speed at the cutting tool 7,500 min-1(rpm) Reduction Ratio 1 4 Maximum allowable motor speed Speed Reduction Ratio Model ASE1507 ARG-011E ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. 0.79" Price The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts of debris while the adjustable regulator provides the correct air pressure for cooling and purging. ø6 mm Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 2-ø7mm 4.7 2" CAT. No. Model 4504 AL-C1204 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft 4-ø7mm E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - 80,000rpm 3 MA Maximum allowable motor speed 2.76" Maximum rotating speed at the cutting tool 0 ø30-0.01 mm (ø1.18") ø1.18" Grease Point Maximum rotating speed at the cutting tool HES810 -1 1,870 min -1 (rpm) (rpm) Speed Reducer 1/16 0.31" CAT. No. HES510 30,000 min • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................ 11.46 oz. 4 1,870 min-1(rpm) Reduction Ratio 1 16 Maximum allowable motor speed Speed Reduction Ratio Model Price ø0.897" Rotary Coupling ø1.0" ø0.98" ø1.18" An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 ASE1508 ARG-021E Speed Reduction Ratio 1/16 HES810 30,000 min-1(rpm) HTS HTS HPS 5 iSpeed3 ø1.0"/ø0.98" ø0.897" ASE1508 SPEED REDUCER 1/16 ARG-021E ø1.0" ø0.98" Xpeed Price 2 E4000 CAT. No. ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" IMPULSE ø1.18" MA MS ROTUS E3000 - Modular E4000 3 ESPERT SHEENUS neo SONIC CUTTER PF1/4 Speed Reduction Ratio 1/4 To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. EmaxEVO PRESTO II R3.5mm ø15mm ø0.897" E3000 - Modular 9.06" 7.48" (rpm) 30,000 min-1(rpm) E3000 - One Piece 0.79" 1 AIR LINE KIT AL-C1204 1.18" iSpeed3 E2530 / E2550 7,500 min -1 (rpm) Speed Reducer 1/4 0.31" CAT. No. ø1.0"/ø0.98" -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 8.54 oz. 2 E2530 / E2550 30,000 min 4504 8.66" 6.69" 1 EmaxEVO Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. 0.79" Caution : “E3000 SERIES” ø1.18"(ø30 mm) AIR LINE KIT the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. HPS Xpeed 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 25 Pin INTERFACE CABLE 7 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a TECHNICAL DATA 8 25 Pin Interface Cable CAT. No. blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. 15 Pin Interface Cable Price Model DB25M DB25M 2-p68 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. APPLICATION EXAMPLES INDEX 15 Pin INTERFACE CABLE For NSK Control Connector A CAT. No. 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Price Model DB15M DB15M PARTS For NSK Control Connector B * Order by catalog number. 2-p69 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p68 “E3000 SERIES” ø1.18" (ø30 mm) SPEED REDUCER CAT. No. ASE1507 SPEED REDUCER 1/4 ARG-011E CAT. No. ESPERT Maximum allowable motor speed 2.09" ROTUS Maximum rotating speed at the cutting tool 0 ø30-0.01 mm (ø1.18") IMPULSE PRESTO II SHEENUS neo SONIC CUTTER Grease Point Maximum rotating speed at the cutting tool 7,500 min-1(rpm) Reduction Ratio 1 4 Maximum allowable motor speed Speed Reduction Ratio Model ASE1507 ARG-011E ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. 0.79" Price The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts of debris while the adjustable regulator provides the correct air pressure for cooling and purging. ø6 mm Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 2-ø7mm 4.7 2" CAT. No. Model 4504 AL-C1204 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft 4-ø7mm E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - 80,000rpm 3 MA Maximum allowable motor speed 2.76" Maximum rotating speed at the cutting tool 0 ø30-0.01 mm (ø1.18") ø1.18" Grease Point Maximum rotating speed at the cutting tool HES810 -1 1,870 min -1 (rpm) (rpm) Speed Reducer 1/16 0.31" CAT. No. HES510 30,000 min • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................ 11.46 oz. 4 1,870 min-1(rpm) Reduction Ratio 1 16 Maximum allowable motor speed Speed Reduction Ratio Model Price ø0.897" Rotary Coupling ø1.0" ø0.98" ø1.18" An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spindles up to 30mm diameter, to be mounted to the turret of a CNC turning machine. The rotary coupling prevents power cable and pneumatic lines from getting tangled when the turret is rotated. Contact NSK America at 800-585-4675 for complete details. MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 ASE1508 ARG-021E Speed Reduction Ratio 1/16 HES810 30,000 min-1(rpm) HTS HTS HPS 5 iSpeed3 ø1.0"/ø0.98" ø0.897" ASE1508 SPEED REDUCER 1/16 ARG-021E ø1.0" ø0.98" Xpeed Price 2 E4000 CAT. No. ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" IMPULSE ø1.18" MA MS ROTUS E3000 - Modular E4000 3 ESPERT SHEENUS neo SONIC CUTTER PF1/4 Speed Reduction Ratio 1/4 To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. EmaxEVO PRESTO II R3.5mm ø15mm ø0.897" E3000 - Modular 9.06" 7.48" (rpm) 30,000 min-1(rpm) E3000 - One Piece 0.79" 1 AIR LINE KIT AL-C1204 1.18" iSpeed3 E2530 / E2550 7,500 min -1 (rpm) Speed Reducer 1/4 0.31" CAT. No. ø1.0"/ø0.98" -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 8.54 oz. 2 E2530 / E2550 30,000 min 4504 8.66" 6.69" 1 EmaxEVO Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. 0.79" Caution : “E3000 SERIES” ø1.18"(ø30 mm) AIR LINE KIT the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. HPS Xpeed 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 25 Pin INTERFACE CABLE 7 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a TECHNICAL DATA 8 25 Pin Interface Cable CAT. No. blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. 15 Pin Interface Cable Price Model DB25M DB25M 2-p68 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. APPLICATION EXAMPLES INDEX 15 Pin INTERFACE CABLE For NSK Control Connector A CAT. No. 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Price Model DB15M DB15M PARTS For NSK Control Connector B * Order by catalog number. 2-p69 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p70 BRUSHLESS MOTOR & SPINDLE BRUSHLESS MOTOR & SPINDLE E3000 SERIES ø1.0" ø0.98" Modular Type (ø25.4 mm) E3000 SERIES (ø25 mm) ø0.897" Modular Type (ø22.8 mm) brushless motor which provides compact size, light weight, output (Max. 300W), and • High-performance excellent durability (motor endurance to 5,000 hours of continuous use by NAKANISHI's internal • Interchangeable with a variety of attachments depending on the application. standard load test). By the combination with high-performance spindles, it can be installed on a NC lathe, special purpose machine, robot, etc. 1 EmaxEVO ESPERT Modular Type ø1.0", ø0.98"(ø25.4, ø25 mm) System Chart Modular Type ø0.897"(ø22.8 mm) System Chart ESPERT ROTUS IMPULSE PRESTO II ROTUS IMPULSE *Take note that model names and specifications will be changed. SHEENUS neo SONIC CUTTER PRESTO II Collet Nut K-265 Collet Nut K-265 Collet CHK-[][] Transmission Clutch Collet CHK-[][] Transmission Clutch Spindle NR-303 Page 2-p35 2 The connection part " " is "concave" The connection part "+" is "concave" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" The connection part "+" is "convex" E3000 - One Piece E3000 - Modular ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 90º Angle Spindle RAS-101 (1 / 2.67 Reduction) Page 2-p36 E4000 3 MA ø0.897" ø1.0" ø0.98" Collet CH8-[][] 90º Angle Spindle RA-100 (1 / 2.67 Reduction) Page 2-p36 Arbor for Metal Saw KCH-02 * ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Speed Reducer ARG-01 (1/3.92 Reduction) Page 2-p38 Brushless Motor (Cord with Quick Disconnect) EM25N-5000-J4 Page 2-p24 Speed Reducer ARG- H2516N ARG-2516N (1/16 Reduction) Page 2-p26 MS E3000 - One Piece Grindstone Arbor AGM-03 ø1.18" Lever Type Spindle NRR-2651 Page 2-p25 E2530 / E2550 ø1.0"/ø0.98" Speed Reducer ARG-H2504N ARG-2504N (1/4 Reduction) Page 2-p26 Collet CHB-[][] 2 E2530 / E2550 Grindstone Arbor AGM-03 ø1.18" SHEENUS neo SONIC CUTTER iSpeed3 Spindle NR-2351 Page 2-p35 Spindle NR-H2551 Spindle NR-2551 Page 2-p25 ø0.897" The connection part " " is "convex" Arbor for Metal Saw KCH-03 Arbor for Metal Saw KCH-03 E2530 / E2550 May be connected between the motor and the spindle as required for increased torque. E3000 - 80,000rpm E4000 Brushless Motor (Cord with Quick Disconnect) EM25-5000-J4 Page 2-p34 Speed Reducer ARG-02 (1/15.39 Reduction) Page 2-p38 3 MA ø0.897" ø1.0" ø0.98" ø1.18" Open and Close Lever Collet CHS-[][] 90º Angle Spindle RA-200 (1 / 1.5 Reduction) Page 2-p36 be connected between *May the motor and the spindle as MS required for increased torque. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 Collet Nut K-265 HES510 Collet CHK-[][] HES510 HES810 HES810 HTS HTS Arbor for Metal Saw KCH-03 HPS 120V HPS Spindle NR-311 Page 2-p37 Xpeed 5 Xpeed Control Unit NE211 Page 2-p46 Grindstone Flange NGF2-19 Selector Unit NE212 Page 2-p47 * AIR LINE KIT Collet CHM-[][] Compressor 6 120V PARTS Air Line Kit AL-C1204 Page 2-p69 7 TECHNICAL DATA *Clean dry air is required. Control Unit NE211 Page 2-p46 Grindstone Arbor AGM-01 Only one motor can be operated at a time. No simultaneous operation. Slim Neck Spindle AMH-301 Page 2-p37 5 AIR LINE KIT 6 PARTS Selector Unit NE212 Page 2-p47 7 TECHNICAL DATA one motor can be *Only operated at a time. 8 Compressor No simultaneous operation. Air Line Kit AL-C1204 Page 2-p69 APPLICATION EXAMPLES INDEX 8 APPLICATION EXAMPLES INDEX * 2-p70 1 EmaxEVO Do not exceed the maximum motor speed recommendation for the spindles. Excess speed will dramatically reduce bearing life. * Do not exceed the maximum motor speed recommendation for the spindles. Excess speed will dramatically reduce bearing life. *Clean dry air is required. 2-p71 2-p56-71_E3000_30mm_A_1407.qxd 14.8.3 4:08 PM ページ 2-p70 BRUSHLESS MOTOR & SPINDLE BRUSHLESS MOTOR & SPINDLE E3000 SERIES ø1.0" ø0.98" Modular Type (ø25.4 mm) E3000 SERIES (ø25 mm) ø0.897" Modular Type (ø22.8 mm) brushless motor which provides compact size, light weight, output (Max. 300W), and • High-performance excellent durability (motor endurance to 5,000 hours of continuous use by NAKANISHI's internal • Interchangeable with a variety of attachments depending on the application. standard load test). By the combination with high-performance spindles, it can be installed on a NC lathe, special purpose machine, robot, etc. 1 EmaxEVO ESPERT Modular Type ø1.0", ø0.98"(ø25.4, ø25 mm) System Chart Modular Type ø0.897"(ø22.8 mm) System Chart ESPERT ROTUS IMPULSE PRESTO II ROTUS IMPULSE *Take note that model names and specifications will be changed. SHEENUS neo SONIC CUTTER PRESTO II Collet Nut K-265 Collet Nut K-265 Collet CHK-[][] Transmission Clutch Collet CHK-[][] Transmission Clutch Spindle NR-303 Page 2-p35 2 The connection part " " is "concave" The connection part "+" is "concave" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" The connection part "+" is "convex" E3000 - One Piece E3000 - Modular ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 90º Angle Spindle RAS-101 (1 / 2.67 Reduction) Page 2-p36 E4000 3 MA ø0.897" ø1.0" ø0.98" Collet CH8-[][] 90º Angle Spindle RA-100 (1 / 2.67 Reduction) Page 2-p36 Arbor for Metal Saw KCH-02 * ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" Speed Reducer ARG-01 (1/3.92 Reduction) Page 2-p38 Brushless Motor (Cord with Quick Disconnect) EM25N-5000-J4 Page 2-p24 Speed Reducer ARG- H2516N ARG-2516N (1/16 Reduction) Page 2-p26 MS E3000 - One Piece Grindstone Arbor AGM-03 ø1.18" Lever Type Spindle NRR-2651 Page 2-p25 E2530 / E2550 ø1.0"/ø0.98" Speed Reducer ARG-H2504N ARG-2504N (1/4 Reduction) Page 2-p26 Collet CHB-[][] 2 E2530 / E2550 Grindstone Arbor AGM-03 ø1.18" SHEENUS neo SONIC CUTTER iSpeed3 Spindle NR-2351 Page 2-p35 Spindle NR-H2551 Spindle NR-2551 Page 2-p25 ø0.897" The connection part " " is "convex" Arbor for Metal Saw KCH-03 Arbor for Metal Saw KCH-03 E2530 / E2550 May be connected between the motor and the spindle as required for increased torque. E3000 - 80,000rpm E4000 Brushless Motor (Cord with Quick Disconnect) EM25-5000-J4 Page 2-p34 Speed Reducer ARG-02 (1/15.39 Reduction) Page 2-p38 3 MA ø0.897" ø1.0" ø0.98" ø1.18" Open and Close Lever Collet CHS-[][] 90º Angle Spindle RA-200 (1 / 1.5 Reduction) Page 2-p36 be connected between *May the motor and the spindle as MS required for increased torque. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 Collet Nut K-265 HES510 Collet CHK-[][] HES510 HES810 HES810 HTS HTS Arbor for Metal Saw KCH-03 HPS 120V HPS Spindle NR-311 Page 2-p37 Xpeed 5 Xpeed Control Unit NE211 Page 2-p46 Grindstone Flange NGF2-19 Selector Unit NE212 Page 2-p47 * AIR LINE KIT Collet CHM-[][] Compressor 6 120V PARTS Air Line Kit AL-C1204 Page 2-p69 7 TECHNICAL DATA *Clean dry air is required. Control Unit NE211 Page 2-p46 Grindstone Arbor AGM-01 Only one motor can be operated at a time. No simultaneous operation. Slim Neck Spindle AMH-301 Page 2-p37 5 AIR LINE KIT 6 PARTS Selector Unit NE212 Page 2-p47 7 TECHNICAL DATA one motor can be *Only operated at a time. 8 Compressor No simultaneous operation. Air Line Kit AL-C1204 Page 2-p69 APPLICATION EXAMPLES INDEX 8 APPLICATION EXAMPLES INDEX * 2-p70 1 EmaxEVO Do not exceed the maximum motor speed recommendation for the spindles. Excess speed will dramatically reduce bearing life. * Do not exceed the maximum motor speed recommendation for the spindles. Excess speed will dramatically reduce bearing life. *Clean dry air is required. 2-p71 2-p72-78_E3000_80000_A_1407.qxd 14.8.3 3:17 PM ページ 2-p72 BRUSHLESS MOTOR & SPINDLE E3000 SERIES ø1.18" ø1.97" 80,000 min-1 (ø30 mm) (ø50 mm) ~80,000 min (rpm) 350W • Auto or Manual Control Modes. • 1,000 • Maximum Output Can be installed on a Special-Purpose Machine, Lathe, Robot, etc. • Motor speed is displayed accurately on the frontNC panel. • -1 1 EmaxEVO 1 Modular Type ø1.18", ø1.97"(ø30, ø50 mm) System Chart Features of E3000 Series EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II PRESTO II SHEENUS neo SONIC CUTTER Collet Nut CHN-A Collet CHA-[][] Spindle NR-3080S NR-3080S SHEENUS neo SONIC CUTTER EM-3080J 2 2 iSpeed3 Brushless Motor EM-3080J EM-3080J-2M E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Motor Cord 120V (Cord with Quick Disconnect) EMCD-3000J3M/4M/6M/8M *1 Selector Unit NE211 Control Unit NE212 one motor can *Only be operated at a time. E3000 - Modular No simultaneous operation. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Collet Nut K-265A Collet CHK-[][] 3 Air Bearing Spindle NRAF-5080 ø0.897" ø1.0" ø0.98" Air Line Kit AL-C1204 (NR-3080S) AL-A1205 (NRAF-5080) AL-A0611 (NRAF-5080) ø1.18" MS *Clean dry air is required. Transmission Clutch 4 HES510 HES810 High Rigidity, Short Body The maximum motor speed 80,000 min-1(rpm) is realized by using high performance brushless motor and ceramic bearings. E3000 series uses a short body that is hardened and precision ground for excellent durability. Maximum Motor Output with 350W Power Supply Motor Connector Attaches Directly to the Back of the Motor / Spindle. E3000 - One Piece The E Series motor is a brushless DC motor utilizing hall elements, the rotor unit is a rare-earth magnet, motor develops 350W. Simple screw-lock connector makes changing motors extremely easy. Electric and Air feed incorporated into a single connector. ø1.18" Motor Endurance Power Source Auto Detection Brushless motor has no carbon brushes or commutator, minimizing wear and resulting in a long service life. Due to the brushless construction, electrical interference and other noises are minimized. Power Source is 100-240V for international operation. Eliminate the need of setting the voltage or changing fuses. Smooth Rotation MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Maximum Motor Speed 80,000 min-1(rpm) The connection part "+" is "concave" The connection part "+" is "convex" ‘The absence of a commutator’ and ‘the use of a photo coupler sending a feedback signal of 48 pulses per revolution’ result in very smooth rotation with little vibration throughout the speed range. Excellent Durability by air-cooling system Air-cooled motor uses a small volume of air (1.0CFM) to prevent heat buildup and allow long continuous operation. Clean dry air is required to cool the motor and protect the spindle from contaminants. Use a filter, regulator and lubricator. (Proper air pressure 28~71PSI) (Use Air Line Kit AL-C1204) Compressor *1 : Motor Cord is Sold Separately. Please see for 2-p76. iSpeed3 Protection System, External Input / Output Control Signal Error function : Motor/Spindle is stopped safety, Error LED is lit. ex.) Overload operation, Air shortage, Motor Spindle can be controlled and monitored by external input-output connector. ex.) Control ; Start/Stop, FWD./REV., Motor Speed Control Monitor ; Motor rotating, Torque Load. Centering Mode Switch This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. Spindle Accuracy APPLICATION EXAMPLES INDEX 2-p72 E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HPS Automatic Control System Chart Xpeed •Single Motor Spindle Operation •Sequential Operation of up to 4 Motor / Spindles Air Air PARTS 8 ø1.0"/ø0.98" ø0.897" HTS 6 TECHNICAL DATA E3000 - Modular HES810 AIR LINE KIT 7 ø0.897" Spindle Accuracy is within 1 µm (TIR). Xpeed 5 ø1.0"/ø0.98" E2530 / E2550 HES510 HTS HPS E2530 / E2550 Spindle Motor Motor Cord Air NE211 Control Unit •ON/OFF •R/L Compressor Motor Cord Compressor Spindle Motor Sequence 6 Spindle Motor Air Spindle Motor Motor Cord NE212 Selector Connector for Unit communication Spindle Motor •ON/OFF NE211 •R/L Control •Motor Selector Unit PARTS 7 TECHNICAL DATA Sequence connecting NE211 to NE212, up to 4 motors can be connected to *When NE212 providing individual control of each motor. (4 motors can not be run simultaneously.) 5 AIR LINE KIT 8 APPLICATION EXAMPLES INDEX 2-p73 2-p72-78_E3000_80000_A_1407.qxd 14.8.3 3:17 PM ページ 2-p72 BRUSHLESS MOTOR & SPINDLE E3000 SERIES ø1.18" ø1.97" 80,000 min-1 (ø30 mm) (ø50 mm) ~80,000 min (rpm) 350W • Auto or Manual Control Modes. • 1,000 • Maximum Output Can be installed on a Special-Purpose Machine, Lathe, Robot, etc. • Motor speed is displayed accurately on the frontNC panel. • -1 1 EmaxEVO 1 Modular Type ø1.18", ø1.97"(ø30, ø50 mm) System Chart Features of E3000 Series EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II PRESTO II SHEENUS neo SONIC CUTTER Collet Nut CHN-A Collet CHA-[][] Spindle NR-3080S NR-3080S SHEENUS neo SONIC CUTTER EM-3080J 2 2 iSpeed3 Brushless Motor EM-3080J EM-3080J-2M E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Motor Cord 120V (Cord with Quick Disconnect) EMCD-3000J3M/4M/6M/8M *1 Selector Unit NE211 Control Unit NE212 one motor can *Only be operated at a time. E3000 - Modular No simultaneous operation. ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Collet Nut K-265A Collet CHK-[][] 3 Air Bearing Spindle NRAF-5080 ø0.897" ø1.0" ø0.98" Air Line Kit AL-C1204 (NR-3080S) AL-A1205 (NRAF-5080) AL-A0611 (NRAF-5080) ø1.18" MS *Clean dry air is required. Transmission Clutch 4 HES510 HES810 High Rigidity, Short Body The maximum motor speed 80,000 min-1(rpm) is realized by using high performance brushless motor and ceramic bearings. E3000 series uses a short body that is hardened and precision ground for excellent durability. Maximum Motor Output with 350W Power Supply Motor Connector Attaches Directly to the Back of the Motor / Spindle. E3000 - One Piece The E Series motor is a brushless DC motor utilizing hall elements, the rotor unit is a rare-earth magnet, motor develops 350W. Simple screw-lock connector makes changing motors extremely easy. Electric and Air feed incorporated into a single connector. ø1.18" Motor Endurance Power Source Auto Detection Brushless motor has no carbon brushes or commutator, minimizing wear and resulting in a long service life. Due to the brushless construction, electrical interference and other noises are minimized. Power Source is 100-240V for international operation. Eliminate the need of setting the voltage or changing fuses. Smooth Rotation MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Maximum Motor Speed 80,000 min-1(rpm) The connection part "+" is "concave" The connection part "+" is "convex" ‘The absence of a commutator’ and ‘the use of a photo coupler sending a feedback signal of 48 pulses per revolution’ result in very smooth rotation with little vibration throughout the speed range. Excellent Durability by air-cooling system Air-cooled motor uses a small volume of air (1.0CFM) to prevent heat buildup and allow long continuous operation. Clean dry air is required to cool the motor and protect the spindle from contaminants. Use a filter, regulator and lubricator. (Proper air pressure 28~71PSI) (Use Air Line Kit AL-C1204) Compressor *1 : Motor Cord is Sold Separately. Please see for 2-p76. iSpeed3 Protection System, External Input / Output Control Signal Error function : Motor/Spindle is stopped safety, Error LED is lit. ex.) Overload operation, Air shortage, Motor Spindle can be controlled and monitored by external input-output connector. ex.) Control ; Start/Stop, FWD./REV., Motor Speed Control Monitor ; Motor rotating, Torque Load. Centering Mode Switch This switch activates the centering mode, which maintains a constant 500 min-1(rpm) spindle speed for centering the tool. Spindle Accuracy APPLICATION EXAMPLES INDEX 2-p72 E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HPS Automatic Control System Chart Xpeed •Single Motor Spindle Operation •Sequential Operation of up to 4 Motor / Spindles Air Air PARTS 8 ø1.0"/ø0.98" ø0.897" HTS 6 TECHNICAL DATA E3000 - Modular HES810 AIR LINE KIT 7 ø0.897" Spindle Accuracy is within 1 µm (TIR). Xpeed 5 ø1.0"/ø0.98" E2530 / E2550 HES510 HTS HPS E2530 / E2550 Spindle Motor Motor Cord Air NE211 Control Unit •ON/OFF •R/L Compressor Motor Cord Compressor Spindle Motor Sequence 6 Spindle Motor Air Spindle Motor Motor Cord NE212 Selector Connector for Unit communication Spindle Motor •ON/OFF NE211 •R/L Control •Motor Selector Unit PARTS 7 TECHNICAL DATA Sequence connecting NE211 to NE212, up to 4 motors can be connected to *When NE212 providing individual control of each motor. (4 motors can not be run simultaneously.) 5 AIR LINE KIT 8 APPLICATION EXAMPLES INDEX 2-p73 2-p72-78_E3000_80000_A_1407.qxd 14.8.3 3:17 PM ページ 2-p74 “E3000 SERIES” CONTROL UNIT “E3000 SERIES” SELECTOR UNIT for international operation • AC100-240V 1,000~80,000 (rpm) • Maximum Output 350W • External Inputmin/ Output Control Signal • for international operation • AC100-240V Up to 4 motors can be connected to NE212 providing individual control of each motor. • (Simultaneous motor operation is not possible) -1 (Refer to 7-p2~p9 page of this catalog) 9775 CONTROL UNIT NE211 ESPERT 80,000 min-1(rpm) 3.46" ROTUS 3.46" [5] Error Reset Switch (RESET) [7] Control Switch (AUTO/MANUAL) [9] Start Switch (START) External Input-Output Connector A (D-SUB25 Female) ø1.0"/ø0.98" 9.37" E3000 - Modular Motor Connector ø1.18" ø1.0"/ø0.98" ø0.897" [6] [5] Motor Select LED [6] Motor Speed Adjustment Switch [7] (SPEED) (FWD./REV.) [8] Motor Selector Switch (MOTOR SEL) [9] Display [10] FWD./REV. LED (FWD. / REV.) [8] Motor Input Connector Air Input Joint ø6 mm [10] Connector for Communication [3] [11] (D-SUB9 Female) • Intake with Power Fuse Specifications Model Power Source Power Consumption Air Flow Volume E3000 Control Unit CAT. No. : NE212 : AC120V : 0.15A : Max. 4.0CFM (51PSI / Using max. 4 motor/spindles) Weight Dimensions 9.88" 10.67" : NE211 : AC120V : 1,000-80,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" : 4 lb. 3.02 oz. : W3.46" x D5.43" x H9.37" 6.61" 7.40" M4x0.7 Stepped Bracket Model Price Standard Equipment · Accessories CAT. No. Back Mounting 4 HES510 Plug Type Price Standard Equipment · Accessories Model HES810 HTS 9775 120V NE211 (B type) Xpeed 7 9781 120V (B type) NE212 • Power Cord : 6 ft • Connect NE211 to NE212 Cable : 23.62" • Communication Cable : 23.62" • Connector Cap (Provided) • Plug to avoid Air Flow • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T1.6AL) 250V: 2 pcs. HTS HPS Xpeed *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type (2-p75) and order accordingly. *Power Source for Global Operation (AC100-240V). Please check the power source plug type and order accordingly. • • Mounting Bracket 5.43" 3.46" 3.58" 2.56" 1.77" 0.18" 5.67" 5.43" TECHNICAL DATA 9.69" 8 9.29" APPLICATION EXAMPLES INDEX 6 For 100V Control Panel Extension Cord CAT. No. Model Fit to 8407 E3000PEX-4 NE211 Price (A type) For 120V (B type) CAT. No. Model Fit to 5 AIR LINE KIT Power Source Plug Plug Type 25 / 15 Pin Interface Cable 6.61" 7.40" M4x0.7 Stepped Bracket Optional 0.39" 6 PARTS • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. 9.88" 10.67" 5 AIR LINE KIT ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" M4x0.7 Stepped Bracket Bottom Mounting ø0.897" MS 0.39" HES810 HPS 3 ø1.18" E3000 Selector Unit Plug Type E4000 MA 9.29" Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Output Joint 1~4 Specifications Communication Connector for NE212 ø1.18" [9] 3.39" 2.56" 1.77" 0.18" 5.83" 5.43" 3.39" 2.56" 1.77" 0.18" ø1.0" ø0.98" [8] ø0.897" E3000 - 80,000rpm 9.69" Power Switch ø0.897" [7] ø1.0"/ø0.98" E2530 / E2550 ø1.0"/ø0.98" ø0.897" Mounting Bracket Intake with Power Fuse [5] [6] E2530 / E2550 ø1.18" 3.46" 3 2 iSpeed3 E3000 - Modular Power Switch Air Input Joint ø6 mm SHEENUS neo SONIC CUTTER E3000 - One Piece [2] Air Output Joint ø6 mm MA 4 [10] [11] Display E4000 HES510 [3] Running LED (RUN) [4] Link LED (LINK) Motor Output Connector 1~4 [4] E3000 - 80,000rpm PRESTO II [5] [7] Rotating Direction Selector Switch [1] External Input-Output Connector B (D-SUB15 Female) E3000 - One Piece IMPULSE [10] Motor Speed Adjustment Switch (SPEED) E2530 / E2550 ø0.897" ROTUS [1] Error LED (ERROR) [2] Warning LED (WARNING) [9] [6] Gear Setting Switch (GEAR) 2 E2530 / E2550 ESPERT [1] [2] [3] [4] [8] Rotating Direction Selector Switch (FWD./REV.) 1 EmaxEVO [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload iSpeed3 80,000 min-1(rpm) [3] Warning LED (WARNING) •••••• SHEENUS neo SONIC CUTTER SELECTOR UNIT NE212 [2] Running LED (RUN) LOAD PRESTO II 9781 [1] Load Meter* * : Load Meter IMPULSE CAT. No. 0.39" CAT. No. 9.37" 1 EmaxEVO Main Usable Area For Japan For U.S.A. and Canada PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug Product 7 TECHNICAL DATA 8 APPLICATION EXAMPLES For Europe INDEX Price Bottom Mounting 2-p74 3.39" 2.56" 1.77" 0.18" 0.39" Back Mounting M4x0.7 Stepped Bracket DB25M DB25M NE211 DB15M DB15M NE211 * Order by catalog number. 2-p75 2-p72-78_E3000_80000_A_1407.qxd 14.8.3 3:17 PM ページ 2-p74 “E3000 SERIES” CONTROL UNIT “E3000 SERIES” SELECTOR UNIT for international operation • AC100-240V 1,000~80,000 (rpm) • Maximum Output 350W • External Inputmin/ Output Control Signal • for international operation • AC100-240V Up to 4 motors can be connected to NE212 providing individual control of each motor. • (Simultaneous motor operation is not possible) -1 (Refer to 7-p2~p9 page of this catalog) 9775 CONTROL UNIT NE211 ESPERT 80,000 min-1(rpm) 3.46" ROTUS 3.46" [5] Error Reset Switch (RESET) [7] Control Switch (AUTO/MANUAL) [9] Start Switch (START) External Input-Output Connector A (D-SUB25 Female) ø1.0"/ø0.98" 9.37" E3000 - Modular Motor Connector ø1.18" ø1.0"/ø0.98" ø0.897" [6] [5] Motor Select LED [6] Motor Speed Adjustment Switch [7] (SPEED) (FWD./REV.) [8] Motor Selector Switch (MOTOR SEL) [9] Display [10] FWD./REV. LED (FWD. / REV.) [8] Motor Input Connector Air Input Joint ø6 mm [10] Connector for Communication [3] [11] (D-SUB9 Female) • Intake with Power Fuse Specifications Model Power Source Power Consumption Air Flow Volume E3000 Control Unit CAT. No. : NE212 : AC120V : 0.15A : Max. 4.0CFM (51PSI / Using max. 4 motor/spindles) Weight Dimensions 9.88" 10.67" : NE211 : AC120V : 1,000-80,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" : 4 lb. 3.02 oz. : W3.46" x D5.43" x H9.37" 6.61" 7.40" M4x0.7 Stepped Bracket Model Price Standard Equipment · Accessories CAT. No. Back Mounting 4 HES510 Plug Type Price Standard Equipment · Accessories Model HES810 HTS 9775 120V NE211 (B type) Xpeed 7 9781 120V (B type) NE212 • Power Cord : 6 ft • Connect NE211 to NE212 Cable : 23.62" • Communication Cable : 23.62" • Connector Cap (Provided) • Plug to avoid Air Flow • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T1.6AL) 250V: 2 pcs. HTS HPS Xpeed *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type (2-p75) and order accordingly. *Power Source for Global Operation (AC100-240V). Please check the power source plug type and order accordingly. • • Mounting Bracket 5.43" 3.46" 3.58" 2.56" 1.77" 0.18" 5.67" 5.43" TECHNICAL DATA 9.69" 8 9.29" APPLICATION EXAMPLES INDEX 6 For 100V Control Panel Extension Cord CAT. No. Model Fit to 8407 E3000PEX-4 NE211 Price (A type) For 120V (B type) CAT. No. Model Fit to 5 AIR LINE KIT Power Source Plug Plug Type 25 / 15 Pin Interface Cable 6.61" 7.40" M4x0.7 Stepped Bracket Optional 0.39" 6 PARTS • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. 9.88" 10.67" 5 AIR LINE KIT ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" M4x0.7 Stepped Bracket Bottom Mounting ø0.897" MS 0.39" HES810 HPS 3 ø1.18" E3000 Selector Unit Plug Type E4000 MA 9.29" Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Output Joint 1~4 Specifications Communication Connector for NE212 ø1.18" [9] 3.39" 2.56" 1.77" 0.18" 5.83" 5.43" 3.39" 2.56" 1.77" 0.18" ø1.0" ø0.98" [8] ø0.897" E3000 - 80,000rpm 9.69" Power Switch ø0.897" [7] ø1.0"/ø0.98" E2530 / E2550 ø1.0"/ø0.98" ø0.897" Mounting Bracket Intake with Power Fuse [5] [6] E2530 / E2550 ø1.18" 3.46" 3 2 iSpeed3 E3000 - Modular Power Switch Air Input Joint ø6 mm SHEENUS neo SONIC CUTTER E3000 - One Piece [2] Air Output Joint ø6 mm MA 4 [10] [11] Display E4000 HES510 [3] Running LED (RUN) [4] Link LED (LINK) Motor Output Connector 1~4 [4] E3000 - 80,000rpm PRESTO II [5] [7] Rotating Direction Selector Switch [1] External Input-Output Connector B (D-SUB15 Female) E3000 - One Piece IMPULSE [10] Motor Speed Adjustment Switch (SPEED) E2530 / E2550 ø0.897" ROTUS [1] Error LED (ERROR) [2] Warning LED (WARNING) [9] [6] Gear Setting Switch (GEAR) 2 E2530 / E2550 ESPERT [1] [2] [3] [4] [8] Rotating Direction Selector Switch (FWD./REV.) 1 EmaxEVO [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload iSpeed3 80,000 min-1(rpm) [3] Warning LED (WARNING) •••••• SHEENUS neo SONIC CUTTER SELECTOR UNIT NE212 [2] Running LED (RUN) LOAD PRESTO II 9781 [1] Load Meter* * : Load Meter IMPULSE CAT. No. 0.39" CAT. No. 9.37" 1 EmaxEVO Main Usable Area For Japan For U.S.A. and Canada PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug Product 7 TECHNICAL DATA 8 APPLICATION EXAMPLES For Europe INDEX Price Bottom Mounting 2-p74 3.39" 2.56" 1.77" 0.18" 0.39" Back Mounting M4x0.7 Stepped Bracket DB25M DB25M NE211 DB15M DB15M NE211 * Order by catalog number. 2-p75 2-p72-78_E3000_80000_A_1407.qxd 14.8.3 3:17 PM ページ 2-p76 “E3000 SERIES” ø1.18"(ø30 mm) BRUSHLESS MOTOR Caution : “E3000 SERIES” ø1.18", ø1.97" (ø30, ø50mm) SPINDLE E3000 Series can be used in conjunction with water or oil based coolants. Brushless Motor with 6.5 ft (2 m) long quick disconnect cord can not used with EMCD-3000J-8M. COOLANT 1 EmaxEVO *Do not exceed the allowable motor speed for the spindle. BRUSHLESS MOTOR EM-3080J 80,000 min-1(rpm) CAT. No. 7588 SPINDLE NR-3080S (Ceramic Bearing) ESPERT PRESTO II SHEENUS neo SONIC CUTTER 1' / 12.1' 0.15" E3000 - One Piece EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M / 8M on page 2-p58 can not used for this motor. ø1.18" ø1.0"/ø0.98" ø0.897" E4000 ø1.18" Torque 200 4 150 3 Continuous Duty Area 1 4 HES510 HES810 30 40 50 60 70 Xpeed 5 AIR LINE KIT 6 PARTS CAT. No. • Wrench (22 x 27) : 1 pc. 1793 Standard Equipment · Accessories Price 8-ø3.5 through hole 8-ø6.5 head depth 3.5 (2 • Wrench (22 x 27) : 1 pc. * Description · Model Length Motor Cord 3M 10 ft (3.0m) 1778 EMCD-3000J-3M Motor Cord 4M 1768 EMCD-3000J-4M Motor Cord 6M 12.1 ft (3.7m) 1767 EMCD-3000J-6M 18.7 ft (5.7m) Motor Cord 8M EMCD-3000J-8M 25.3 ft (7.7m) 1766 • Collet ø1/8" (CHA-3.175) • Collet Nut (CHN-A) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. AIR BEARING SPINDLE NRAF-5080 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 Std. Accessories Fit to 2.5 ) (0.67") Price 80,000 min-1(rpm) • Allowable Motor Speed ............................... 80,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Air Bearing Consumption ............................. 1.24CFM (73PSI) • Weight .......................................................... 1 lb. 12.57 oz. • Main body mount method ................. Flange mounting method, M3 bolt (8 locations, 45˚ Angle, PDC57) • Bearing Type .............................................. Air static bearing • Bearing Load Capacity ..................... Radial : 20N, Thrust : 40N • Useable Max. Diameter of Grindstone ..... Less than ø8mm (For ø6.0mm shank) • Hose Diameter (Air Intake · Bearing) ........................... ø4.0mm EMCD-3000J-8M (25.3 ft / 8m long) can not be used for this motor. CAT. No. SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" ø0.897" MOTOR CORD Product Price Price 80 Speed { x 103 min-1(rpm) } HTS HPS Model 1788 EM-3080J2M 0 20 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. 50 0 MS Standard Equipment · Accessories Brushless Motor with 12.1 ft Cord 100 2 PRESTO II E3000 - Modular 22.5 ø1.0" ø0.98" 250 IMPULSE ø0.897" 300 Output 6 5 Model 1781 EM-3080J Output (W) ø0.897" 350 7 Torque (cN.m) MA 400 ROTUS ø1.18" CAT. No. 8 Standard Equipment · Accessories Brushless Motor with 1 ft Cord E3000 - 80,000rpm 9 ESPERT E3000 - One Piece - E3000 - Modular • Model 7588 NR-3080S This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. ø50 00.025 mm (1.97") ø0.897" • Motor Speed .................................. 20,000~80,000 min-1(rpm) • Max. Output Power .................................................... 350W • Housing .......................................... Stainless steel (SUS416) • Weight (EM-3080J) .................................... 12.70 oz. (w/o Cord) • Weight (EM-3080J-2M) ............................... 18.70 oz. (w/o Cord) ø2.56" PCD 57 ø1.89" Note : Motor Cord is sold separately. Please select a cord from the list below. 45 E2530 / E2550 3 CAT. No. 1 EmaxEVO 2 Spindle 1.11" Recommended Clamping Area iSpeed3 E2530 / E2550 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) Quick Disconnect Cord 2 ø1.0"/ø0.98" 0 mm ø30-0.01 (1.18") 0.03mm ø30--0.02 (ø1.18") IMPULSE ø0.46" ROTUS • Allowable Motor Speed ............................... 80,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.00 oz. (1.23") Max. Tool Mounting Depth (0.58") (1.26") 3.85" 80,000 min-1(rpm) 0.98" 0.47" 0.31" 0.86" 3.24" 3.91" (0.61") < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) EM-3080J EM-3080J-2M CAT. No. air bearing type spindle incorporates an air pressure bearing •This that floats the spindle resulting in almost no vibration and extremely high accuracy for extremely high precision machining. EM-3080J * Air line kit AL-A1205 and AL-A0611 are recommendable as air supply system. E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS Air Bearing Spindle • Air Hose • Connector Cap (Provided) E3000 - 80,000rpm 1793 HPS Model Standard Equipment · Accessories NRAF5080 • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265A) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • Fitting for piping (KQ2H04-M5-X2) : 1pc. • Plug (KQ2P-04) : 1pc. • Intake Air Hose : ø4mm x 13ft, 1pc. • Bar Wrench (K-236) : 1pc. Price Xpeed 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p76 * Order by catalog number. 2-p77 2-p72-78_E3000_80000_A_1407.qxd 14.8.3 3:17 PM ページ 2-p76 “E3000 SERIES” ø1.18"(ø30 mm) BRUSHLESS MOTOR Caution : “E3000 SERIES” ø1.18", ø1.97" (ø30, ø50mm) SPINDLE E3000 Series can be used in conjunction with water or oil based coolants. Brushless Motor with 6.5 ft (2 m) long quick disconnect cord can not used with EMCD-3000J-8M. COOLANT 1 EmaxEVO *Do not exceed the allowable motor speed for the spindle. BRUSHLESS MOTOR EM-3080J 80,000 min-1(rpm) CAT. No. 7588 SPINDLE NR-3080S (Ceramic Bearing) ESPERT PRESTO II SHEENUS neo SONIC CUTTER 1' / 12.1' 0.15" E3000 - One Piece EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M / 8M on page 2-p58 can not used for this motor. ø1.18" ø1.0"/ø0.98" ø0.897" E4000 ø1.18" Torque 200 4 150 3 Continuous Duty Area 1 4 HES510 HES810 30 40 50 60 70 Xpeed 5 AIR LINE KIT 6 PARTS CAT. No. • Wrench (22 x 27) : 1 pc. 1793 Standard Equipment · Accessories Price 8-ø3.5 through hole 8-ø6.5 head depth 3.5 (2 • Wrench (22 x 27) : 1 pc. * Description · Model Length Motor Cord 3M 10 ft (3.0m) 1778 EMCD-3000J-3M Motor Cord 4M 1768 EMCD-3000J-4M Motor Cord 6M 12.1 ft (3.7m) 1767 EMCD-3000J-6M 18.7 ft (5.7m) Motor Cord 8M EMCD-3000J-8M 25.3 ft (7.7m) 1766 • Collet ø1/8" (CHA-3.175) • Collet Nut (CHN-A) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. AIR BEARING SPINDLE NRAF-5080 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 Std. Accessories Fit to 2.5 ) (0.67") Price 80,000 min-1(rpm) • Allowable Motor Speed ............................... 80,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Air Bearing Consumption ............................. 1.24CFM (73PSI) • Weight .......................................................... 1 lb. 12.57 oz. • Main body mount method ................. Flange mounting method, M3 bolt (8 locations, 45˚ Angle, PDC57) • Bearing Type .............................................. Air static bearing • Bearing Load Capacity ..................... Radial : 20N, Thrust : 40N • Useable Max. Diameter of Grindstone ..... Less than ø8mm (For ø6.0mm shank) • Hose Diameter (Air Intake · Bearing) ........................... ø4.0mm EMCD-3000J-8M (25.3 ft / 8m long) can not be used for this motor. CAT. No. SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" ø0.897" MOTOR CORD Product Price Price 80 Speed { x 103 min-1(rpm) } HTS HPS Model 1788 EM-3080J2M 0 20 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. 50 0 MS Standard Equipment · Accessories Brushless Motor with 12.1 ft Cord 100 2 PRESTO II E3000 - Modular 22.5 ø1.0" ø0.98" 250 IMPULSE ø0.897" 300 Output 6 5 Model 1781 EM-3080J Output (W) ø0.897" 350 7 Torque (cN.m) MA 400 ROTUS ø1.18" CAT. No. 8 Standard Equipment · Accessories Brushless Motor with 1 ft Cord E3000 - 80,000rpm 9 ESPERT E3000 - One Piece - E3000 - Modular • Model 7588 NR-3080S This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. ø50 00.025 mm (1.97") ø0.897" • Motor Speed .................................. 20,000~80,000 min-1(rpm) • Max. Output Power .................................................... 350W • Housing .......................................... Stainless steel (SUS416) • Weight (EM-3080J) .................................... 12.70 oz. (w/o Cord) • Weight (EM-3080J-2M) ............................... 18.70 oz. (w/o Cord) ø2.56" PCD 57 ø1.89" Note : Motor Cord is sold separately. Please select a cord from the list below. 45 E2530 / E2550 3 CAT. No. 1 EmaxEVO 2 Spindle 1.11" Recommended Clamping Area iSpeed3 E2530 / E2550 < Optional > • Collet (CHA-[][]) ........................................ ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) Quick Disconnect Cord 2 ø1.0"/ø0.98" 0 mm ø30-0.01 (1.18") 0.03mm ø30--0.02 (ø1.18") IMPULSE ø0.46" ROTUS • Allowable Motor Speed ............................... 80,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHA-3.175) .................................. ø1/8" • Weight .................................................................. 6.00 oz. (1.23") Max. Tool Mounting Depth (0.58") (1.26") 3.85" 80,000 min-1(rpm) 0.98" 0.47" 0.31" 0.86" 3.24" 3.91" (0.61") < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) EM-3080J EM-3080J-2M CAT. No. air bearing type spindle incorporates an air pressure bearing •This that floats the spindle resulting in almost no vibration and extremely high accuracy for extremely high precision machining. EM-3080J * Air line kit AL-A1205 and AL-A0611 are recommendable as air supply system. E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS Air Bearing Spindle • Air Hose • Connector Cap (Provided) E3000 - 80,000rpm 1793 HPS Model Standard Equipment · Accessories NRAF5080 • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265A) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • Fitting for piping (KQ2H04-M5-X2) : 1pc. • Plug (KQ2P-04) : 1pc. • Intake Air Hose : ø4mm x 13ft, 1pc. • Bar Wrench (K-236) : 1pc. Price Xpeed 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p76 * Order by catalog number. 2-p77 2-p72-78_E3000_80000_A_1407.qxd 14.8.3 3:17 PM ページ 2-p78 “E3000 SERIES” AIR LINE KIT 1 CAT. No. 4504 AIR LINE KIT AL-C1204 EmaxEVO 0.79" ESPERT ROTUS 9.06" 7.48" 0.79" The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts 0.79" of debris while the adjustable regulator provides the correct air pressure for cooling and purging. IMPULSE R3.5mm ø15mm PRESTO II SHEENUS neo SONIC CUTTER ø6 mm 8.66" 6.69" PF1/4 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. 2-ø7mm iSpeed3 E2530 / E2550 4504 AL-C1204 1.18" ø1.0"/ø0.98" E2530 / E2550 Model 4.7 2" ø0.897" E3000 - One Piece Standard Equipment · Accessories Price • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft 4-ø7mm E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" CAT. No. 4505 AIR LINE KIT AL-A1205 (For Air Bearing Spindles) E3000 - 80,000rpm •The AL-A1205 is a dual output dry air, Air Line Kit designed for use on 11.81" 10.24" E4000 0.79" 0.79" 3 MA 0.79" ø6 mm ø0.897" ø1.0" ø0.98" • R3.5mm ø15mm ø1.18" ø6 mm 8.66" 6.30" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" • PF1/4 2-ø7mm 4 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) Model 1.18" CAT. No. 4.7 2" HES510 HES810 Electric Motor Systems that use the NRAF-5080 Air Bearing Spindle and the NE211 (E3000) Control Unit. One output is for the Electric Motor cooling, and the second output is for the Air Bearing operation. This unit is also designed for use on Air Turbine / Air Bearing Motor/Spindles such as the ABT Series. One air output drives the Air Turbine Motor. The other air output drives the Air Bearing Spindle. Always supply air to the Air Bearing before starting the EM-3080 Motor. When stopping the spindle, always stop the motor before removing the air from the Air Bearing Spindle. Always supply air to the Air Bearing Spindle before starting the Air Turbine Motor. When stopping the spindle, always stop the Air Turbine Motor before removing the air from the Air Bearing Spindle. 4505 AL-A1205 4-ø7mm HTS Standard Equipment · Accessories Price • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft HPS Xpeed 5 CAT. No. 1548 AIR LINE KIT AL-A0611 (For Air Bearing Spindles) •The AL-A0611 is a high filtered Air Line Kit utilizing a *0.01µm micro 6 PARTS 0.79" AIR LINE KIT 4-ø7mm Exterior screw Type * ø6mm 7 8 ø6mm Air Line Kit (For ø6 mm Hose · Filter Mesh 0.01 µm) CAT. No. APPLICATION EXAMPLES Model 1548 AL-A0611 0.79" INDEX 2-p78 • * 16.93" 15.35" TECHNICAL DATA mist filter system for NRAF-5080 Air Bearing Spindles combined with the NE211 (E3000) Control Unit. This Air Line Kit is highly recommended for use on all Xpeed Series Air Turbine / Air Bearing motor/spindles. Exterior screw Type (Model KK13P-02M by SMC Corporation) 0.59" 17.52" 18.70" Standard Equipment · Accessories • Mist Separator • Micro Mist Separator • Membrane Air Dryer • Regulator • Solenoid Valve • Digital Pressure Switch Price 0.59" * Order by catalog number. 2-p79-89_E4000_A_1407.qxd 14.8.3 3:13 PM ページ 1 HIGH POWER SOLUTIONS E4000 Series Electric System 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ROTUS Outside Diameter ø1.57"(ø40 mm) 2,000~40,000 min-1(rpm) Max. Output 1,200W • One Piece Type / Modular Type • Up to ø0.375" Collet Capacity • Designed for use on CNC Lathes, Robots and Special Application Machines for precision milling, drilling grinding, slitting and deburring applications. IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 2-p79 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p80 BRUSHLESS MOTOR SPINDLE E4000 SERIES One Piece Type Modular Type ø1.57" (ø40 mm) Speed, Power and Torque in a Brushless DC Motor/Spindle • High 2,000 40,000 min (rpm) with 1,200 Watts (1.6 HP) of Power • 40 mm~ (1.57 Dia.) Body Diameter • .375" Collet Capacity • -1 1 1 EmaxEVO Features of E4000 Series (Cord with Quick Disconnect) EMCD-40002M / 4M / 6M / 8M SHEENUS neo SONIC CUTTER iSpeed3 Collet Nut Collet CHN-16 CH16-[][] 200V Control Unit NE246 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 Brushless Motor Spindle BMS-4020RA / BMS-4040RA ø0.897" E3000 - One Piece Motor Signal Cable (Cord with Quick Disconnect) EMCD-4000S2M / 4M / 6M / 8M E3000 - Modular • Compressor E3000 - 80,000rpm *1 : Motor Cord is Sold Separately. 3 Please see for 2-p88. 80 1000 Output 70 60 800 50 600 Torque 40 400 30 20 0 0 5 10 15 20 25 30 Motor Cord Air MA ø0.897" NE246 Control Unit E2530 / E2550 0 40 35 ø0.897" Speed { x 103 min-1(rpm) } E3000 - One Piece 100 ON/OFF R/L Compressor Torque E3000 - Modular 60 50 E3000 - 80,000rpm 600 40 400 30 E4000 MA ø0.897" 0 0 5 10 0 20 15 Speed { x 103 min-1(rpm) } ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Collet CH16-[][] Collet Nut Collet K-265 CHK-[][] PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX E4000, BMS-4040 Combination Example Air Quick Change Spindle NR4040-AQC 5 Brushless Motor EM-4020A / EM-4040A Collet Nut CHN-16 Collet CH16-[][] ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 EMCD-40002M / 4M / 6M / 8M Spindle NR-4040 Brushless Motor EM-4020 / EM-4040 HPS 6 40,000 min-1(rpm) (Cord with Quick Disconnect) Collet Nut CHN-16 HTS AIR LINE KIT One Piece Type Combination Example Motor Power Cable with Air Hose HES810 Xpeed ø1.0" ø0.98" ø1.18" Modular Type System Chart MS 3 200 Continuous Duty Area 10 ø1.0" ø0.98" ø1.0"/ø0.98" ø0.897" 1200 800 20 Sequence ø1.18" 1400 1000 Output 70 iSpeed3 ø1.0"/ø0.98" Continuous Duty Area 10 2 E2530 / E2550 200 BMS-4020 / BMS-4020RA EM-4020 / EM-4020A Air Motor Spindle SHEENUS neo SONIC CUTTER 1200 90 80 is supplied. *Cooled-air (51PSI) PRESTO II 1400 90 E4000 IMPULSE 100 Single Motor Spindle Operation Air Line Kit AL-C1204 ROTUS BMS-4040 / BMS-4040RA EM-4040 / EM-4040A Automatic Control System Chart ø1.18" ø1.0"/ø0.98" ø0.897" • • Torque Characteristics . 2 Brushless Motor Spindle BMS-4020 / BMS-4040 2,000~40,000 min-1(rpm), 500 min-1(rpm) (for centering rotation) Rated output 400W (Max. output 1,200W) Spindle accuracy 1 µm or less. Achieved continuous run of over 5,000 hours. {NAKANISHI's factory test without load at 40,000 min-1(rpm)} Motor weight : 3 lb. 4.91 oz. (BMS-4020 / 4040), 2 lb. 13.86 oz. (EM-4020 / 4040), 4 lb. 6.55 oz. (BMS-4020RA / 4040RA), 3 lb. 15.49 oz. (EM-4020A / 4040A) Proper cooling air pressure 51PSI Cooling air consumption 3.53CFM Extremely low vibration brushless DC motor. Utilizes a double pair of ultra-precision ceramic bearings to obtain high rigidity in both radial and thrust directions. Incorporates 2 ceramic bearings on the front side and 2 on the rear side. External housing made of precision ground stainless steel SUS-416. Output (W) PRESTO II •• • • •• • • Output (W) Motor Power Cable with Air Hose IMPULSE ESPERT . ROTUS Torque (cN m) One Piece Type System Chart Torque (cN m) ESPERT EmaxEVO CAT. No. Model 8472 1791 9253 9257 4504 NE246 BMS-4040 EMCD-4000-2M EMCD-4000S-2M AL-C1204 HES510 Price Product Control Unit Motor Spindle Motor Power Cable Motor Signal Cable Air Line Kit Motor Signal Cable HTS HPS Xpeed 5 Total (Cord with Quick Disconnect) HES810 AIR LINE KIT EMCD-4000S2M / 4M / 6M / 8M 6 Lever Quick Change Spindle NR4040-QC Modular Type Combination Example 40,000 min (rpm) -1 PARTS 7 Compressor 200V Control Unit NE246 Air Line Kit AL-C1204 is supplied. *Cooled-air (51PSI) *1 : Motor Cord is Sold Separately. Please see for 2-p88. TECHNICAL DATA E4000, EM-4040, NR-4040 Combination Example CAT. No. Model 8472 8346 9213 9253 9257 4504 NE246 EM-4040 NR-4040 EMCD-4000-2M EMCD-4000S-2M AL-C1204 Product Price Control Unit Motor Spindle Motor Power Cable Motor Signal Cable Air Line Kit 8 APPLICATION EXAMPLES INDEX Total 2-p80 * Order by catalog number. 2-p81 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p80 BRUSHLESS MOTOR SPINDLE E4000 SERIES One Piece Type Modular Type ø1.57" (ø40 mm) Speed, Power and Torque in a Brushless DC Motor/Spindle • High 2,000 40,000 min (rpm) with 1,200 Watts (1.6 HP) of Power • 40 mm~ (1.57 Dia.) Body Diameter • .375" Collet Capacity • -1 1 1 EmaxEVO Features of E4000 Series (Cord with Quick Disconnect) EMCD-40002M / 4M / 6M / 8M SHEENUS neo SONIC CUTTER iSpeed3 Collet Nut Collet CHN-16 CH16-[][] 200V Control Unit NE246 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 Brushless Motor Spindle BMS-4020RA / BMS-4040RA ø0.897" E3000 - One Piece Motor Signal Cable (Cord with Quick Disconnect) EMCD-4000S2M / 4M / 6M / 8M E3000 - Modular • Compressor E3000 - 80,000rpm *1 : Motor Cord is Sold Separately. 3 Please see for 2-p88. 80 1000 Output 70 60 800 50 600 Torque 40 400 30 20 0 0 5 10 15 20 25 30 Motor Cord Air MA ø0.897" NE246 Control Unit E2530 / E2550 0 40 35 ø0.897" Speed { x 103 min-1(rpm) } E3000 - One Piece 100 ON/OFF R/L Compressor Torque E3000 - Modular 60 50 E3000 - 80,000rpm 600 40 400 30 E4000 MA ø0.897" 0 0 5 10 0 20 15 Speed { x 103 min-1(rpm) } ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Collet CH16-[][] Collet Nut Collet K-265 CHK-[][] PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX E4000, BMS-4040 Combination Example Air Quick Change Spindle NR4040-AQC 5 Brushless Motor EM-4020A / EM-4040A Collet Nut CHN-16 Collet CH16-[][] ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 EMCD-40002M / 4M / 6M / 8M Spindle NR-4040 Brushless Motor EM-4020 / EM-4040 HPS 6 40,000 min-1(rpm) (Cord with Quick Disconnect) Collet Nut CHN-16 HTS AIR LINE KIT One Piece Type Combination Example Motor Power Cable with Air Hose HES810 Xpeed ø1.0" ø0.98" ø1.18" Modular Type System Chart MS 3 200 Continuous Duty Area 10 ø1.0" ø0.98" ø1.0"/ø0.98" ø0.897" 1200 800 20 Sequence ø1.18" 1400 1000 Output 70 iSpeed3 ø1.0"/ø0.98" Continuous Duty Area 10 2 E2530 / E2550 200 BMS-4020 / BMS-4020RA EM-4020 / EM-4020A Air Motor Spindle SHEENUS neo SONIC CUTTER 1200 90 80 is supplied. *Cooled-air (51PSI) PRESTO II 1400 90 E4000 IMPULSE 100 Single Motor Spindle Operation Air Line Kit AL-C1204 ROTUS BMS-4040 / BMS-4040RA EM-4040 / EM-4040A Automatic Control System Chart ø1.18" ø1.0"/ø0.98" ø0.897" • • Torque Characteristics . 2 Brushless Motor Spindle BMS-4020 / BMS-4040 2,000~40,000 min-1(rpm), 500 min-1(rpm) (for centering rotation) Rated output 400W (Max. output 1,200W) Spindle accuracy 1 µm or less. Achieved continuous run of over 5,000 hours. {NAKANISHI's factory test without load at 40,000 min-1(rpm)} Motor weight : 3 lb. 4.91 oz. (BMS-4020 / 4040), 2 lb. 13.86 oz. (EM-4020 / 4040), 4 lb. 6.55 oz. (BMS-4020RA / 4040RA), 3 lb. 15.49 oz. (EM-4020A / 4040A) Proper cooling air pressure 51PSI Cooling air consumption 3.53CFM Extremely low vibration brushless DC motor. Utilizes a double pair of ultra-precision ceramic bearings to obtain high rigidity in both radial and thrust directions. Incorporates 2 ceramic bearings on the front side and 2 on the rear side. External housing made of precision ground stainless steel SUS-416. Output (W) PRESTO II •• • • •• • • Output (W) Motor Power Cable with Air Hose IMPULSE ESPERT . ROTUS Torque (cN m) One Piece Type System Chart Torque (cN m) ESPERT EmaxEVO CAT. No. Model 8472 1791 9253 9257 4504 NE246 BMS-4040 EMCD-4000-2M EMCD-4000S-2M AL-C1204 HES510 Price Product Control Unit Motor Spindle Motor Power Cable Motor Signal Cable Air Line Kit Motor Signal Cable HTS HPS Xpeed 5 Total (Cord with Quick Disconnect) HES810 AIR LINE KIT EMCD-4000S2M / 4M / 6M / 8M 6 Lever Quick Change Spindle NR4040-QC Modular Type Combination Example 40,000 min (rpm) -1 PARTS 7 Compressor 200V Control Unit NE246 Air Line Kit AL-C1204 is supplied. *Cooled-air (51PSI) *1 : Motor Cord is Sold Separately. Please see for 2-p88. TECHNICAL DATA E4000, EM-4040, NR-4040 Combination Example CAT. No. Model 8472 8346 9213 9253 9257 4504 NE246 EM-4040 NR-4040 EMCD-4000-2M EMCD-4000S-2M AL-C1204 Product Price Control Unit Motor Spindle Motor Power Cable Motor Signal Cable Air Line Kit 8 APPLICATION EXAMPLES INDEX Total 2-p80 * Order by catalog number. 2-p81 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p82 “E4000 SERIES” CONTROL UNIT “E4000 SERIES” BRUSHLESS MOTOR SPINDLE COOLANT • 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" Warning/Error Function Motor Spindle is stopped safely and quickly, Warning/Error LED is lit, Warning/Error Signal is output to external device when a problem or tool breakage is detected. Warning : • Air shortage • Overload operation • Motor Sensor Error • Control Unit Overheat Error : • Internal Circuit Error • Voltage/Currency Error • Overheat/Overload operation • Operation Error • Air shortage E3000 - One Piece E3000 - Modular • • Maximum RPM Setting by Parameter Capable of setting a maximum allowable motor speed by Parameter Setting (2.18") Max. Tool Mounting ROTUS Depth*2 (1.31") (0.57") 7.51" PRESTO II (Refer to Technical Data 7-p18~p23 in detail) • Input Signal Examples : Start / Stop, Forward / Reverse, Pulse Speed Increase / Decrease, Speed Control, Error Code Release. • Output Signal Examples : Error / Warning, At-Speed, RPM Monitoring, Torque Monitoring, Rotating Signal. • STRAIGHT TYPE BMS-4020 BMS-4040 1.57" E4000 [2] 3 E2530 / E2550 (2.18") Max. Tool Mounting Depth*2 E3000 - One Piece ø0.897" (1.31") 90˚ ANGLE TYPE ( RA) BMS-4020RA BMS-4040RA 8.03" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 1.57" 3.54" Recommended Clamping Area 6' [11] [4] *1 : When the tool shank diameter is between 6.9mm and 10mm ø0.897" *2 : When the tool shank diameter is less than 6.9mm ø1.0" ø0.98" MS [5] [6] ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 [7] [8] [1] Load Meter • E4000 Optional Safety Relay Box The Safety Relay Box is for use with the E4000 Control Unit. The Safety Relay “A” contacts switch the Motor Power Line and “B” contacts switch the external outputs to the machining center’s CNC controller. [9] LOAD [2] Running LED (RUN) [3] Warning LED (WARNING) • • • •••••• : Continuous load area : Intermittent load area : Overload [4] Error LED (ERROR) [5] Error Reset Switch (RESET) [6] Gear Setting Switch (GEAR) • The Safety Relay utilizes Normally Open contacts. The Emergency Stop Signal lines must be supplied with power to hold the Safety Relay contacts closed and allow the E4000 Control Unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the E4000 Control Unit and the machining center's controller will cause the relay contacts to open and the E4000 motor to stop. • The Emergency Stop Signal Input can be connected to any and all portions of the machine’s safety systems (E-Stop String) to stop the E4000 motor any time that stoppage of the spindle and motor is required. • The “B” contact outputs can be used to detect an open circuit on the motor line and integrated with the machines safety systems to stop the machine in case a problem occurs. TECHNICAL DATA 8 3 MA ø0.897" ø1.0" ø0.98" Plug Type 4 HES510 Note : Motor Cable is sold separately. HES810 HTS HPS [8] Rotating Direction Selector Switch (FWD./REV.) 40,000 min-1(rpm) [9] Start Switch (START) [10] Motor Speed Adjustment Switch (SPEED) [11] Display Specifications Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions CAT. No. Xpeed Model 1791 BMS-4040 1792 BMS-4040RA Shape Max. Torque Straight 0.5 N · m : NE246 : AC 200 V : 2,000-40,000 min-1(rpm) : 1,200 W : 3.2 A : 3.53 CFM (51PSI) : 14 lb. 12.34 oz. : W9.84" x D11.42" x H3.94" 90˚ Angle Standard Equipment · Accessories Price Spindle Accuracy Max. Output Rated Output Within 1 µm 1,200W Weight * CAT. No. 1789 1790 Price Cord Length 3 lb 4.91 oz. 1 ft 4 lb 6.55 oz. 6 ft 6 * Model BMS-4020 Shape Max. Torque Straight BMS-4020RA 90˚ Angle Spindle Accuracy Max. Output Rated Output Within 1 µm 1,200W Weight * 1 ft 4 lb 6.55 oz. 6 ft 8472 200V NE246 7 400W 8 w/o Motor Cable APPLICATION EXAMPLES Standard Equipment · Accessories • Power Cord : 13 ft • Air Hose with filter : 6 ft • Connector Cap (Provided) • Connector Cover (Provided) • Bracket : 4 pcs. • Rubber Pad *Please refer to Technical Data 7-p18~p23 in detail about External Input-Output Connector. PARTS TECHNICAL DATA * INDEX w/o Motor Cable Price Cord Length 3 lb 4.91 oz. 5 AIR LINE KIT 400W 20,000 min-1(rpm) 1.0 N · m Model ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø1.18" [7] Control Switch (AUTO/MANUAL) E4000 Control Unit CAT. No. ø1.18" MS • Proper Air Pressure .............................................. 51PSI • Air Consumption ............................................. 3.53CFM • Min. Bending Cord Radius ................................. R70 mm < Optional > • Collet (CH16-[][]) ................................ ø3.0 mm~ø8.0 mm (See Page 6-p5 for details) • Motor Power Cable*3 ........................................... ø1.18" • Motor Signal Cable*3 ........................................... ø0.39" • Air Hose ............................................................ ø6mm APPLICATION EXAMPLES 2-p82 E4000 *3 : Max. Motor Cable length is 6 meter (90˚ ANGLE TYPE) ø1.18" HES810 iSpeed3 (2.70") Max. Tool Mounting Depth*1 [10] [3] MA 2 1' ø1.0"/ø0.98" • [1] SHEENUS neo SONIC CUTTER E2530 / E2550 Operation Panel Extension Cord 4 meter (13 ft.) is available E3000 - 80,000rpm 3.54" Recommended Clamping Area Quick Disconnect Cord Motor Speed Display Motor speed is displayed precisely and digitally. ø1.0"/ø0.98" ø0.897" HES510 IMPULSE External Input-Output Connector ø1.18" 4 1 EmaxEVO ESPERT (2.70") Max. Tool Mounting Depth*1 ø1.18" ø0.39" SHEENUS neo SONIC CUTTER • • 40,000 · 20,000 min-1(rpm) Quick Disconnect Cord PRESTO II High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. BRUSHLESS MOTOR SPINDLE BMS SERIES 40,000 min-1(rpm) ø0.91" IMPULSE CONTROL UNIT NE246 ø0.91" • ROTUS 8472 0 ø40 -0.01 mm (ø1.57") ESPERT CAT. No. 0 ø40 -0.01 mm (ø1.57") 1 EmaxEVO E4000 Series can be used in conjunction with water or oil based coolants. INDEX • Collet ø1/4" (CH16-6.35) : 1 pc. • Collet Nut (CHN-16) • Wrench (15 x 17), (22 x 27) : 1 pc. each Interface Cable Page 2-p89 * Order by catalog number. 2-p83 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p82 “E4000 SERIES” CONTROL UNIT “E4000 SERIES” BRUSHLESS MOTOR SPINDLE COOLANT • 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" Warning/Error Function Motor Spindle is stopped safely and quickly, Warning/Error LED is lit, Warning/Error Signal is output to external device when a problem or tool breakage is detected. Warning : • Air shortage • Overload operation • Motor Sensor Error • Control Unit Overheat Error : • Internal Circuit Error • Voltage/Currency Error • Overheat/Overload operation • Operation Error • Air shortage E3000 - One Piece E3000 - Modular • • Maximum RPM Setting by Parameter Capable of setting a maximum allowable motor speed by Parameter Setting (2.18") Max. Tool Mounting ROTUS Depth*2 (1.31") (0.57") 7.51" PRESTO II (Refer to Technical Data 7-p18~p23 in detail) • Input Signal Examples : Start / Stop, Forward / Reverse, Pulse Speed Increase / Decrease, Speed Control, Error Code Release. • Output Signal Examples : Error / Warning, At-Speed, RPM Monitoring, Torque Monitoring, Rotating Signal. • STRAIGHT TYPE BMS-4020 BMS-4040 1.57" E4000 [2] 3 E2530 / E2550 (2.18") Max. Tool Mounting Depth*2 E3000 - One Piece ø0.897" (1.31") 90˚ ANGLE TYPE ( RA) BMS-4020RA BMS-4040RA 8.03" E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 1.57" 3.54" Recommended Clamping Area 6' [11] [4] *1 : When the tool shank diameter is between 6.9mm and 10mm ø0.897" *2 : When the tool shank diameter is less than 6.9mm ø1.0" ø0.98" MS [5] [6] ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 [7] [8] [1] Load Meter • E4000 Optional Safety Relay Box The Safety Relay Box is for use with the E4000 Control Unit. The Safety Relay “A” contacts switch the Motor Power Line and “B” contacts switch the external outputs to the machining center’s CNC controller. [9] LOAD [2] Running LED (RUN) [3] Warning LED (WARNING) • • • •••••• : Continuous load area : Intermittent load area : Overload [4] Error LED (ERROR) [5] Error Reset Switch (RESET) [6] Gear Setting Switch (GEAR) • The Safety Relay utilizes Normally Open contacts. The Emergency Stop Signal lines must be supplied with power to hold the Safety Relay contacts closed and allow the E4000 Control Unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the E4000 Control Unit and the machining center's controller will cause the relay contacts to open and the E4000 motor to stop. • The Emergency Stop Signal Input can be connected to any and all portions of the machine’s safety systems (E-Stop String) to stop the E4000 motor any time that stoppage of the spindle and motor is required. • The “B” contact outputs can be used to detect an open circuit on the motor line and integrated with the machines safety systems to stop the machine in case a problem occurs. TECHNICAL DATA 8 3 MA ø0.897" ø1.0" ø0.98" Plug Type 4 HES510 Note : Motor Cable is sold separately. HES810 HTS HPS [8] Rotating Direction Selector Switch (FWD./REV.) 40,000 min-1(rpm) [9] Start Switch (START) [10] Motor Speed Adjustment Switch (SPEED) [11] Display Specifications Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions CAT. No. Xpeed Model 1791 BMS-4040 1792 BMS-4040RA Shape Max. Torque Straight 0.5 N · m : NE246 : AC 200 V : 2,000-40,000 min-1(rpm) : 1,200 W : 3.2 A : 3.53 CFM (51PSI) : 14 lb. 12.34 oz. : W9.84" x D11.42" x H3.94" 90˚ Angle Standard Equipment · Accessories Price Spindle Accuracy Max. Output Rated Output Within 1 µm 1,200W Weight * CAT. No. 1789 1790 Price Cord Length 3 lb 4.91 oz. 1 ft 4 lb 6.55 oz. 6 ft 6 * Model BMS-4020 Shape Max. Torque Straight BMS-4020RA 90˚ Angle Spindle Accuracy Max. Output Rated Output Within 1 µm 1,200W Weight * 1 ft 4 lb 6.55 oz. 6 ft 8472 200V NE246 7 400W 8 w/o Motor Cable APPLICATION EXAMPLES Standard Equipment · Accessories • Power Cord : 13 ft • Air Hose with filter : 6 ft • Connector Cap (Provided) • Connector Cover (Provided) • Bracket : 4 pcs. • Rubber Pad *Please refer to Technical Data 7-p18~p23 in detail about External Input-Output Connector. PARTS TECHNICAL DATA * INDEX w/o Motor Cable Price Cord Length 3 lb 4.91 oz. 5 AIR LINE KIT 400W 20,000 min-1(rpm) 1.0 N · m Model ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø1.18" [7] Control Switch (AUTO/MANUAL) E4000 Control Unit CAT. No. ø1.18" MS • Proper Air Pressure .............................................. 51PSI • Air Consumption ............................................. 3.53CFM • Min. Bending Cord Radius ................................. R70 mm < Optional > • Collet (CH16-[][]) ................................ ø3.0 mm~ø8.0 mm (See Page 6-p5 for details) • Motor Power Cable*3 ........................................... ø1.18" • Motor Signal Cable*3 ........................................... ø0.39" • Air Hose ............................................................ ø6mm APPLICATION EXAMPLES 2-p82 E4000 *3 : Max. Motor Cable length is 6 meter (90˚ ANGLE TYPE) ø1.18" HES810 iSpeed3 (2.70") Max. Tool Mounting Depth*1 [10] [3] MA 2 1' ø1.0"/ø0.98" • [1] SHEENUS neo SONIC CUTTER E2530 / E2550 Operation Panel Extension Cord 4 meter (13 ft.) is available E3000 - 80,000rpm 3.54" Recommended Clamping Area Quick Disconnect Cord Motor Speed Display Motor speed is displayed precisely and digitally. ø1.0"/ø0.98" ø0.897" HES510 IMPULSE External Input-Output Connector ø1.18" 4 1 EmaxEVO ESPERT (2.70") Max. Tool Mounting Depth*1 ø1.18" ø0.39" SHEENUS neo SONIC CUTTER • • 40,000 · 20,000 min-1(rpm) Quick Disconnect Cord PRESTO II High-Performance Electric Circuit ‘High grade feedback loop to maintain constant spindle speed even if load is varied’, and ‘Gentle start/Quick stop functions’ are provided. BRUSHLESS MOTOR SPINDLE BMS SERIES 40,000 min-1(rpm) ø0.91" IMPULSE CONTROL UNIT NE246 ø0.91" • ROTUS 8472 0 ø40 -0.01 mm (ø1.57") ESPERT CAT. No. 0 ø40 -0.01 mm (ø1.57") 1 EmaxEVO E4000 Series can be used in conjunction with water or oil based coolants. INDEX • Collet ø1/4" (CH16-6.35) : 1 pc. • Collet Nut (CHN-16) • Wrench (15 x 17), (22 x 27) : 1 pc. each Interface Cable Page 2-p89 * Order by catalog number. 2-p83 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p84 “E4000 SERIES” BRUSHLESS MOTOR “E4000 SERIES” SPINDLE COOLANT *Do not exceed the allowable motor speed for the spindle. 1 BRUSHLESS MOTOR EmaxEVO 40,000 · 20,000 min-1(rpm) CAT. No. 9213 SPINDLE NR-4040 40,000 min-1(rpm) ESPERT ESPERT ROTUS ROTUS IMPULSE (2.78") Max. Tool Mounting Depth (1.17") 3.15" (0.57") 6.80" EM-4020 EM-4040 2 IMPULSE PRESTO II SHEENUS neo SONIC CUTTER ø0.91" STRAIGHT TYPE 0 ø40 -0.01 mm (ø1.57") 0 ø40 -0.01 mm (ø1.57") • ø1.18" ø0.39" PRESTO II SHEENUS neo SONIC CUTTER 1 EmaxEVO 2 1' iSpeed3 Quick Disconnect Cord 1.23" E2530 / E2550 iSpeed3 1.04" (0.88") E2530 / E2550 Recommended Clamping Area ø1.0"/ø0.98" E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • 90˚ ANGLE TYPE ( A) EM-4020A EM-4040A • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CH16-6.35) .................................. ø1/4" • Weight ........................................................... 1 lb. 8.69 oz. E4000 (0.57") 6' 3 MA ø0.897" ø1.0" ø0.98" Quick Disconnect Cord ø1.18" 7.69" 0 ø40 -0.01 mm (ø1.57") E3000 - Modular < Optional > • Collet (CH16-[][]) ...................................... ø3.0 mm~ø8.0 mm (See Page 6-p3 for details) • Collet Nut (CHN-16) .................................... For Collet (CH16) spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. 9213 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Spindle CAT. No. E3000 - Modular Model NR-4040 Standard Equipment · Accessories • Collet ø1/4" (CH16-6.35) • Collet Nut (CHN-16) : 1 pc. • Wrench (36), (15 x 17), (22 x 27) : 1 pc. each Price E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS • Proper Air Pressure .............................................. 51PSI • Air Consumption ............................................. 3.53CFM • Min. Bending Cord Radius ................................. R70 mm < Optional > • Motor Power Cable*3 ........................................... ø1.18" • Motor Signal Cable*3 ........................................... ø0.39" • Air Hose ............................................................ ø6mm ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø1.18" *3 : Max. Motor Cable length is 6 meter (90˚ ANGLE TYPE) HES510 Note : Motor Cable is sold separately. HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 4 HPS 40,000 min-1(rpm) CAT. No. Xpeed Model 8346 EM-4040 8347 EM-4040A Shape Max. Torque Max. Output Rated Output Straight 0.5 N · m 1,200W Weight * Price Cord Length 2 lb 13.86 oz. 1 ft 3 lb 15.49 oz. 6 ft 400W 90˚ Angle 6 * 20,000 min-1(rpm) 7 CAT. No. TECHNICAL DATA 8348 EM-4020 8 8349 EM-4020A Model Shape Max. Torque Max. Output Rated Output Straight 1.0 N · m 1,200W 90˚ Angle APPLICATION EXAMPLES Weight * 1 ft 3 lb 15.49 oz. 6 ft w/o Motor Cable Price Cord Length 2 lb 13.86 oz. 5 AIR LINE KIT PARTS 7 TECHNICAL DATA 400W 8 * w/o Motor Cable APPLICATION EXAMPLES Standard Equipment · Accessories INDEX INDEX • Wrench (36) : 1 pc 2-p84 * Order by catalog number. 2-p85 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p84 “E4000 SERIES” BRUSHLESS MOTOR “E4000 SERIES” SPINDLE COOLANT *Do not exceed the allowable motor speed for the spindle. 1 BRUSHLESS MOTOR EmaxEVO 40,000 · 20,000 min-1(rpm) CAT. No. 9213 SPINDLE NR-4040 40,000 min-1(rpm) ESPERT ESPERT ROTUS ROTUS IMPULSE (2.78") Max. Tool Mounting Depth (1.17") 3.15" (0.57") 6.80" EM-4020 EM-4040 2 IMPULSE PRESTO II SHEENUS neo SONIC CUTTER ø0.91" STRAIGHT TYPE 0 ø40 -0.01 mm (ø1.57") 0 ø40 -0.01 mm (ø1.57") • ø1.18" ø0.39" PRESTO II SHEENUS neo SONIC CUTTER 1 EmaxEVO 2 1' iSpeed3 Quick Disconnect Cord 1.23" E2530 / E2550 iSpeed3 1.04" (0.88") E2530 / E2550 Recommended Clamping Area ø1.0"/ø0.98" E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • 90˚ ANGLE TYPE ( A) EM-4020A EM-4040A • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CH16-6.35) .................................. ø1/4" • Weight ........................................................... 1 lb. 8.69 oz. E4000 (0.57") 6' 3 MA ø0.897" ø1.0" ø0.98" Quick Disconnect Cord ø1.18" 7.69" 0 ø40 -0.01 mm (ø1.57") E3000 - Modular < Optional > • Collet (CH16-[][]) ...................................... ø3.0 mm~ø8.0 mm (See Page 6-p3 for details) • Collet Nut (CHN-16) .................................... For Collet (CH16) spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. 9213 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Spindle CAT. No. E3000 - Modular Model NR-4040 Standard Equipment · Accessories • Collet ø1/4" (CH16-6.35) • Collet Nut (CHN-16) : 1 pc. • Wrench (36), (15 x 17), (22 x 27) : 1 pc. each Price E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS • Proper Air Pressure .............................................. 51PSI • Air Consumption ............................................. 3.53CFM • Min. Bending Cord Radius ................................. R70 mm < Optional > • Motor Power Cable*3 ........................................... ø1.18" • Motor Signal Cable*3 ........................................... ø0.39" • Air Hose ............................................................ ø6mm ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø1.18" *3 : Max. Motor Cable length is 6 meter (90˚ ANGLE TYPE) HES510 Note : Motor Cable is sold separately. HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 4 HPS 40,000 min-1(rpm) CAT. No. Xpeed Model 8346 EM-4040 8347 EM-4040A Shape Max. Torque Max. Output Rated Output Straight 0.5 N · m 1,200W Weight * Price Cord Length 2 lb 13.86 oz. 1 ft 3 lb 15.49 oz. 6 ft 400W 90˚ Angle 6 * 20,000 min-1(rpm) 7 CAT. No. TECHNICAL DATA 8348 EM-4020 8 8349 EM-4020A Model Shape Max. Torque Max. Output Rated Output Straight 1.0 N · m 1,200W 90˚ Angle APPLICATION EXAMPLES Weight * 1 ft 3 lb 15.49 oz. 6 ft w/o Motor Cable Price Cord Length 2 lb 13.86 oz. 5 AIR LINE KIT PARTS 7 TECHNICAL DATA 400W 8 * w/o Motor Cable APPLICATION EXAMPLES Standard Equipment · Accessories INDEX INDEX • Wrench (36) : 1 pc 2-p84 * Order by catalog number. 2-p85 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p86 “E4000 SERIES” SPINDLE COOLANT 1 EmaxEVO COOLANT *Do not exceed the allowable motor speed for the spindle. CAT. No. 9219 AIR QUICK CHANGE SPINDLE NR4040-AQC ESPERT *Do not exceed the allowable motor speed for the spindle. CAT. No. 40,000 min-1(rpm) 9214 LEVER QUICK CHANGE SPINDLE NRR4040-QC 40,000 min-1(rpm) ESPERT NR4040-AQC ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 ROTUS Features: • • • Features: The collet holder can be replaced by using Air ON/OFF. Air ON/OFF M4 Bolt The Spindle housing is made from precision ground, hardened, stainless steel (SUS). There are 2 types of collet holders. Various sizes of mounting collets are available depending on the collet holder used. • • • • IMPULSE Quick, easy and accurate tool change without the need for wrenches. PRESTO II SHEENUS neo SONIC CUTTER Makes tool pre-setting outside of the machine possible. 2 collet styles available (CHK or CH16) depending on QC5 Model. (CHK 0.5mm - 6.35mm or CH16 3.0mm, 3.175mm, 4.0mm, 6.0mm, 6.35mm, 8.0mm and 10.0mm) Holder Collet Holder •QC5-K / •QC5-16 E2530 / E2550 ø1.0"/ø0.98" 2 iSpeed3 10 times the retention force as compared to the NRR-2651. Collet Holder •QC5-K / •QC5-16 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" (1.30") QC5-16 holder (1.69") * for ø1/4" tool shank 4 - M4 X 0.7 depth 10 E3000 - Modular QC5-K holder E3000 - One Piece ø1.57" ø2.68" E3000 - 80,000rpm Air ON/OFF ø0.91" ø1.0"/ø0.98" ø0.897" 0 ø40 -0.01 mm (ø1.57") Max.Tool Mounting Depth 5" .0 ø2 ø1.18" E4000 (1.30") QC5-16 holder (1.69") * for ø1/4" tool shank 5.24" ø1.0" ø0.98" ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Air for Collet Opening ........................................... 80~87PSI • Weight ......................................................... 4 lb. 12.19 oz. ø1.57" ø1.95" (0.15") Max.Tool Mounting Depth 2.76" ø0.91" (1.45") ø0.897" (2.13") 0 ø40 -0.01 mm (ø1.57") 0.05"-0.07" MA < Optional > • Collet Holder .......................................................... QC5-K • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .......................................... for Collet (CHK) QC5-K holder photo: •QC5-16 3 • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Weight ......................................................... 2 lb. 13.86 oz. (3.20") E3000 - One Piece MS 1 EmaxEVO Air Quick Change Spindle < Optional > • Collet Holder .......................................................... QC5-K • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .......................................... for Collet (CHK) (1.57") CAT. No. Model Standard Equipment · Accessories 9219 NR4040AQC • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (36) : 1 pc. Price photo: •QC5-16 < Optional > • Collet Holder ......................................................... QC5-16 • Collet (CH16-[][]) ...................................... ø3.0 mm~ø8.0 mm (See Page 6-p5 for details) • Collet Nut (CHN-16) ..................................... for Collet (CH16) Recommended Clamping Area (2.67") 0.05"-0.07" (1.45") (0.15") 1.56" 1.01" 5.24" Lever Quick Change Spindle CAT. No. Model Standard Equipment · Accessories Price E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Note : 9214 NRR4040QC The Collet Holder with Collet Nut, and Collet are sold separately. • Wrench (36) : 1 pc. HES810 HTS < Optional > • Collet Holder ......................................................... QC5-16 • Collet (CH16-[][]) ...................................... ø3.0 mm~ø8.0 mm (See Page 6-p5 for details) • Collet Nut (CHN-16) ..................................... for Collet (CH16) HPS Note : The Collet Holder with Collet Nut, and Collet are sold separately. Xpeed 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 7 COLLET HOLDER Taper Shank Tools and Collet Nut Product CAT. No. Model Collet PRESET ADAPTER Std. Accessories Attaches to Price Product CAT. No. PARTS Model TECHNICAL DATA 8 9215 • QC5-K CHK • Collet Nut (K-265) : 1 pc. NR4040-AQC NRR4040-QC 9217 • QC5-K ADP APPLICATION EXAMPLES Price Collet Holder •QC5-K •QC5-16 Loosen 8 Tighten INDEX APPLICATION EXAMPLES INDEX 9216 2-p86 7 TECHNICAL DATA • QC5-16 CH16 • Collet Nut (CHN-16) : 1 pc. NR4040-AQC NRR4040-QC 9218 • QC5-16 ADP Preset Adapter •QC5-K ADP •QC5-16 ADP * Order by catalog number. 2-p87 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p86 “E4000 SERIES” SPINDLE COOLANT 1 EmaxEVO COOLANT *Do not exceed the allowable motor speed for the spindle. CAT. No. 9219 AIR QUICK CHANGE SPINDLE NR4040-AQC ESPERT *Do not exceed the allowable motor speed for the spindle. CAT. No. 40,000 min-1(rpm) 9214 LEVER QUICK CHANGE SPINDLE NRR4040-QC 40,000 min-1(rpm) ESPERT NR4040-AQC ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 ROTUS Features: • • • Features: The collet holder can be replaced by using Air ON/OFF. Air ON/OFF M4 Bolt The Spindle housing is made from precision ground, hardened, stainless steel (SUS). There are 2 types of collet holders. Various sizes of mounting collets are available depending on the collet holder used. • • • • IMPULSE Quick, easy and accurate tool change without the need for wrenches. PRESTO II SHEENUS neo SONIC CUTTER Makes tool pre-setting outside of the machine possible. 2 collet styles available (CHK or CH16) depending on QC5 Model. (CHK 0.5mm - 6.35mm or CH16 3.0mm, 3.175mm, 4.0mm, 6.0mm, 6.35mm, 8.0mm and 10.0mm) Holder Collet Holder •QC5-K / •QC5-16 E2530 / E2550 ø1.0"/ø0.98" 2 iSpeed3 10 times the retention force as compared to the NRR-2651. Collet Holder •QC5-K / •QC5-16 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" (1.30") QC5-16 holder (1.69") * for ø1/4" tool shank 4 - M4 X 0.7 depth 10 E3000 - Modular QC5-K holder E3000 - One Piece ø1.57" ø2.68" E3000 - 80,000rpm Air ON/OFF ø0.91" ø1.0"/ø0.98" ø0.897" 0 ø40 -0.01 mm (ø1.57") Max.Tool Mounting Depth 5" .0 ø2 ø1.18" E4000 (1.30") QC5-16 holder (1.69") * for ø1/4" tool shank 5.24" ø1.0" ø0.98" ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Air for Collet Opening ........................................... 80~87PSI • Weight ......................................................... 4 lb. 12.19 oz. ø1.57" ø1.95" (0.15") Max.Tool Mounting Depth 2.76" ø0.91" (1.45") ø0.897" (2.13") 0 ø40 -0.01 mm (ø1.57") 0.05"-0.07" MA < Optional > • Collet Holder .......................................................... QC5-K • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .......................................... for Collet (CHK) QC5-K holder photo: •QC5-16 3 • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Weight ......................................................... 2 lb. 13.86 oz. (3.20") E3000 - One Piece MS 1 EmaxEVO Air Quick Change Spindle < Optional > • Collet Holder .......................................................... QC5-K • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .......................................... for Collet (CHK) (1.57") CAT. No. Model Standard Equipment · Accessories 9219 NR4040AQC • Air Hose with filter (K-251) : ø6 mm x 6 ft • Wrench (36) : 1 pc. Price photo: •QC5-16 < Optional > • Collet Holder ......................................................... QC5-16 • Collet (CH16-[][]) ...................................... ø3.0 mm~ø8.0 mm (See Page 6-p5 for details) • Collet Nut (CHN-16) ..................................... for Collet (CH16) Recommended Clamping Area (2.67") 0.05"-0.07" (1.45") (0.15") 1.56" 1.01" 5.24" Lever Quick Change Spindle CAT. No. Model Standard Equipment · Accessories Price E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 Note : 9214 NRR4040QC The Collet Holder with Collet Nut, and Collet are sold separately. • Wrench (36) : 1 pc. HES810 HTS < Optional > • Collet Holder ......................................................... QC5-16 • Collet (CH16-[][]) ...................................... ø3.0 mm~ø8.0 mm (See Page 6-p5 for details) • Collet Nut (CHN-16) ..................................... for Collet (CH16) HPS Note : The Collet Holder with Collet Nut, and Collet are sold separately. Xpeed 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 7 COLLET HOLDER Taper Shank Tools and Collet Nut Product CAT. No. Model Collet PRESET ADAPTER Std. Accessories Attaches to Price Product CAT. No. PARTS Model TECHNICAL DATA 8 9215 • QC5-K CHK • Collet Nut (K-265) : 1 pc. NR4040-AQC NRR4040-QC 9217 • QC5-K ADP APPLICATION EXAMPLES Price Collet Holder •QC5-K •QC5-16 Loosen 8 Tighten INDEX APPLICATION EXAMPLES INDEX 9216 2-p86 7 TECHNICAL DATA • QC5-16 CH16 • Collet Nut (CHN-16) : 1 pc. NR4040-AQC NRR4040-QC 9218 • QC5-16 ADP Preset Adapter •QC5-K ADP •QC5-16 ADP * Order by catalog number. 2-p87 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p88 “E4000 SERIES” AIR LINE KIT & MOTOR CABLE CAT. No. 4504 ESPERT 0.79" ROTUS 9.06" 7.48" 0.79" The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts 0.79" of debris while the adjustable regulator provides the correct air pressure for cooling and purging. IMPULSE PRESTO II ESPERT E4000 Motor Spindle or the E4000 Control Unit to stop the machine operation. Example of using an E4000 control unit with the Safety Relay Box 2-ø7mm Model 4504 AL-C1204 1.18" E2530 / E2550 4.7 2" ø0.897" Standard Equipment · Accessories Price ø1.0"/ø0.98" ø0.897" 344.2 250 Safety Relay Box 4-ø7mm CAT. No. Model Standard Equipment · Accessories E3000 - One Piece 71.2 E3000 - Modular Price 90 100 ø1.18" MOTOR POWER CABLE with Air Hose E4000SRB • Relay Cord (Motor Power Line) • Emergency Stop Cord ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 10 8475 E4000 Please contact NSK America for specification and pricing. Product MA Model Length EMCD-4000-2M 6 ft (2.0m) EMCD-4000-4M 13 ft (4.0m) CAT. No. 9253 ø0.897" ø1.0" ø0.98" 9254 ø1.18" Std. Accessories MS 9255 Connector Diameter : ø1.18" 9256 EMCD-4000-6M EMCD-4000-8M 20 ft (6.0m) 26 ft * (8.0m) 4 Fit to 3 Price BMS-4020 BMS-4040 BMS-4020RA BMS-4040RA EM-4020 EM-4040 EM-4020A EM-4040A • Air Hose ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" 3 2 E2530 / E2550 • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft ø1.18" E4000 IMPULSE 139 CAT. No. ø1.0"/ø0.98" E3000 - 80,000rpm ROTUS SHEENUS neo SONIC CUTTER Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) E2530 / E2550 E3000 - Modular Mounts directly on E4000 Control Unit. •Allows Emergency Stop Signal from the CNC to stop the EmaxEVO PF1/4 iSpeed3 E3000 - One Piece 1 SAFETY RELAY BOX ø6 mm 8.66" 6.69" 2 8475 PRESTO II R3.5mm ø15mm SHEENUS neo SONIC CUTTER CAT. No. AIR LINE KIT AL-C1204 43 1 EmaxEVO “E4000 SERIES” SAFETY RELAY BOX & PARTS MA ø0.897" ø1.0" ø0.98" ø1.18" Operation Panel Extension Cord / Box For Control Panel CAT. No. Model 8474 E4000PEX4 BMS-4020 · BMS-4040 EM-4020 · EM-4040 * Not for use with the 90-Degree Angle Motor (RA) Product Description / Specifications Operation Panel Extension Cord (4m) Fit to MS Price E4000 Control Unit 4 HES510 HES510 HES810 HTS MOTOR SIGNAL CABLE 8473 HPS Product CAT. No. Model Xpeed 5 AIR LINE KIT 6 7 8 APPLICATION EXAMPLES INDEX 2-p88 Connector Diameter : ø0.39" Length Std. Accessories Fit to 9257 EMCD-4000S-2M 6 ft (2.0m) 9258 EMCD-4000S-4M 13 ft (4.0m) 9259 EMCD-4000S-6M 20 ft (6.0m) BMS-4020 BMS-4040 BMS-4020RA BMS-4040RA EM-4020 EM-4040 EM-4020A EM-4040A 9260 EMCD-4000S-8M 26 ft * (8.0m) BMS-4020 · BMS-4040 EM-4020 · EM-4040 PARTS TECHNICAL DATA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Please purchase both the Motor Power Cable and the Motor Signal Cable HES810 Box For Control Panel E4000PB • Case A • Case B • Blind Plate • Screw (M3) : 6 pcs. • Screw (M4) : 2 pcs. HTS E4000 Control Unit HPS Price Xpeed 5 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a 3 Meter long Interface Cable provides a • DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. * Not for use with the 90-Degree Angle Motor (RA) 25 Pin Interface Cable CAT. No. 15 Pin Interface Cable Price Model DB25M DB25M blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. For NSK Control Connector A CAT. No. Price Model DB15M DB15M AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX For NSK Control Connector B * Order by catalog number. 2-p89 2-p79-89_E4000_A_1407.qxd 14.8.3 3:14 PM ページ 2-p88 “E4000 SERIES” AIR LINE KIT & MOTOR CABLE CAT. No. 4504 ESPERT 0.79" ROTUS 9.06" 7.48" 0.79" The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts 0.79" of debris while the adjustable regulator provides the correct air pressure for cooling and purging. IMPULSE PRESTO II ESPERT E4000 Motor Spindle or the E4000 Control Unit to stop the machine operation. Example of using an E4000 control unit with the Safety Relay Box 2-ø7mm Model 4504 AL-C1204 1.18" E2530 / E2550 4.7 2" ø0.897" Standard Equipment · Accessories Price ø1.0"/ø0.98" ø0.897" 344.2 250 Safety Relay Box 4-ø7mm CAT. No. Model Standard Equipment · Accessories E3000 - One Piece 71.2 E3000 - Modular Price 90 100 ø1.18" MOTOR POWER CABLE with Air Hose E4000SRB • Relay Cord (Motor Power Line) • Emergency Stop Cord ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 10 8475 E4000 Please contact NSK America for specification and pricing. Product MA Model Length EMCD-4000-2M 6 ft (2.0m) EMCD-4000-4M 13 ft (4.0m) CAT. No. 9253 ø0.897" ø1.0" ø0.98" 9254 ø1.18" Std. Accessories MS 9255 Connector Diameter : ø1.18" 9256 EMCD-4000-6M EMCD-4000-8M 20 ft (6.0m) 26 ft * (8.0m) 4 Fit to 3 Price BMS-4020 BMS-4040 BMS-4020RA BMS-4040RA EM-4020 EM-4040 EM-4020A EM-4040A • Air Hose ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" 3 2 E2530 / E2550 • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft ø1.18" E4000 IMPULSE 139 CAT. No. ø1.0"/ø0.98" E3000 - 80,000rpm ROTUS SHEENUS neo SONIC CUTTER Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) E2530 / E2550 E3000 - Modular Mounts directly on E4000 Control Unit. •Allows Emergency Stop Signal from the CNC to stop the EmaxEVO PF1/4 iSpeed3 E3000 - One Piece 1 SAFETY RELAY BOX ø6 mm 8.66" 6.69" 2 8475 PRESTO II R3.5mm ø15mm SHEENUS neo SONIC CUTTER CAT. No. AIR LINE KIT AL-C1204 43 1 EmaxEVO “E4000 SERIES” SAFETY RELAY BOX & PARTS MA ø0.897" ø1.0" ø0.98" ø1.18" Operation Panel Extension Cord / Box For Control Panel CAT. No. Model 8474 E4000PEX4 BMS-4020 · BMS-4040 EM-4020 · EM-4040 * Not for use with the 90-Degree Angle Motor (RA) Product Description / Specifications Operation Panel Extension Cord (4m) Fit to MS Price E4000 Control Unit 4 HES510 HES510 HES810 HTS MOTOR SIGNAL CABLE 8473 HPS Product CAT. No. Model Xpeed 5 AIR LINE KIT 6 7 8 APPLICATION EXAMPLES INDEX 2-p88 Connector Diameter : ø0.39" Length Std. Accessories Fit to 9257 EMCD-4000S-2M 6 ft (2.0m) 9258 EMCD-4000S-4M 13 ft (4.0m) 9259 EMCD-4000S-6M 20 ft (6.0m) BMS-4020 BMS-4040 BMS-4020RA BMS-4040RA EM-4020 EM-4040 EM-4020A EM-4040A 9260 EMCD-4000S-8M 26 ft * (8.0m) BMS-4020 · BMS-4040 EM-4020 · EM-4040 PARTS TECHNICAL DATA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Please purchase both the Motor Power Cable and the Motor Signal Cable HES810 Box For Control Panel E4000PB • Case A • Case B • Blind Plate • Screw (M3) : 6 pcs. • Screw (M4) : 2 pcs. HTS E4000 Control Unit HPS Price Xpeed 5 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a 3 Meter long Interface Cable provides a • DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. * Not for use with the 90-Degree Angle Motor (RA) 25 Pin Interface Cable CAT. No. 15 Pin Interface Cable Price Model DB25M DB25M blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. For NSK Control Connector A CAT. No. Price Model DB15M DB15M AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX For NSK Control Connector B * Order by catalog number. 2-p89 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 1 MODULAR AIR SPINDLE MA Series Air System 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 MA SERIES • Modular Type • Outside Diameter : Modular Type Spindle IMPULSE PRESTO II Separate motor and spindle for flexible application changes. Spindle SHEENUS neo SONIC CUTTER Motor Easy to interchange components. 2 ø0.897", ø0.98", ø1.0" and ø1.18" iSpeed3 (ø22.8, ø25, ø25.4 and ø30 mm) E2530 / E2550 O.D. ø0.897" (ø22.8mm) ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece (Modular Type) Angle Spindles and Straight Spindles are available. E3000 - Modular ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 MA MS SERIES ø0.897" ø1.0" ø0.98" • One Piece Type • Outside Diameter : ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75", ø0.79", ø0.87", ø0.91", ø0.98" and ø1.0" 4 (ø19.05, ø20, ø22, ø23, ø25 and ø25.4 mm) HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX PARTS O.D. ø1.18" (ø30mm) (Modular Type) Angle Spindles and Straight Spindles are available. 7 O.D. ø0.98"/1.0" (ø25/25.4mm) (Modular Type) Straight Spindles are available. TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p1 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 1 MODULAR AIR SPINDLE MA Series Air System 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 MA SERIES • Modular Type • Outside Diameter : Modular Type Spindle IMPULSE PRESTO II Separate motor and spindle for flexible application changes. Spindle SHEENUS neo SONIC CUTTER Motor Easy to interchange components. 2 ø0.897", ø0.98", ø1.0" and ø1.18" iSpeed3 (ø22.8, ø25, ø25.4 and ø30 mm) E2530 / E2550 O.D. ø0.897" (ø22.8mm) ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece (Modular Type) Angle Spindles and Straight Spindles are available. E3000 - Modular ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 MA MS SERIES ø0.897" ø1.0" ø0.98" • One Piece Type • Outside Diameter : ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75", ø0.79", ø0.87", ø0.91", ø0.98" and ø1.0" 4 (ø19.05, ø20, ø22, ø23, ø25 and ø25.4 mm) HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX PARTS O.D. ø1.18" (ø30mm) (Modular Type) Angle Spindles and Straight Spindles are available. 7 O.D. ø0.98"/1.0" (ø25/25.4mm) (Modular Type) Straight Spindles are available. TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p1 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p2 FEATURES & DRILLING CAPACITY REFERENCE TABLE MODULAR AIR SPINDLE MA SERIES MA Series Features 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER ø0.897"(ø22.8 mm) Modular Type MA Series ø0.897"(ø22.8 mm) System Chart slide NC lathes can be transformed into complex machining centers. •Gang Specialized design will be made compact and universal. •Mounting MAmachine on existing equipment can eliminate secondary operations or the equipment can be turned into a special purpose machine. •The MA SeriesSeries to secondary operation machines, single purpose machines or special machining and grinding machines. •The air motors areis applicable explosion and do not generate heat even in continuous use. •When MA Series is used at lowproof speed, a speed reducer (ARG-01, or other selections) is added in order to obtain the speed of your choice. •Collet, Jacobs drill chuck, saw arbormotor and grinding stone arbor are available for grinding, drilling, milling, slitting, chamfer and deburring operations. • • • 1 MA Series has been designed to operate smoothly at high speed for long continuous cutting and grinding by connecting an air line kit directly between the air compressor and the air motor. (Air Line Kit Refer to 3-p10 in detail) Air supply and exhaust air hoses are supplied with an air motor. Air supply hose is provided with metal fitting to connect to ø0.24"(ø6 mm) one-touch joint. Air exhaust hose is supplied with silencer. EmaxEVO ESPERT ROTUS IMPULSE PRESTO II Application Examples Collet Nut K-265 SHEENUS neo SONIC CUTTER Air Motor Spindle Collet CHK-[][] Spindle NR-303 Compressor Air Line Kit 2 2 Arbor for Metal Saw KCH-03 iSpeed3 iSpeed3 Spindle NR-2351 Compressor E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" Grindstone Arbor AGM-03 E3000 - One Piece 90º Angle Spindle RAS-101 (1 / 2.67 Reduction) E3000 - Modular E3000 - One Piece Air Line Kit AL-M1202. AL-M1203BS2 E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 90º Angle Spindle RA-100 (1 / 2.67 Reduction) Collet CH8-[][] 3 ø0.897" ø1.0" ø0.98" Collet CHS-[][] 4 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Drilling Capacity Reference Table HES810 Grindstone Flange NGF2-19 Air Motor AM-600R This table summarizes the drilling capacity for the MA Series spindles. Please use this table as a guide for the selection of the proper model given the torque, speed and size requirements for your application. Data is given for three materials Medium Carbon Steel (S45C), aluminum and brass. HTS HPS *Conditions : High speed steel drill was used with a feed rate of 60mm/min. Tool life was not considered in determining the above capacities. Combination as System Speed {min-1(rpm)} Output (W) Motor Speed Reducer Spindle AM-300R AM-300R AM-300R ARG-01 (1/3.92) ARG-02 (1/15.39) NR-2351 NR-2351 NR-2351 30,000 8,000 2,000 57 57 57 AM-310R AM-310R AM-310R ARG-01 (1/3.92) ARG-02 (1/15.39) NR-2351 NR-2351 NR-2351 30,000 8,000 2,000 AM-2526R AM-2526R ARG-2504N (1/4) AM-2526R ARG-2516N (1/16) NR-2551 NR-2551 NR-2551 24,000 6,000 1,500 NR-453E NR-453E NR-453E 19,000 4,750 1,190 Max. Torque (cN·m ) Max. Drill Diameter for drilling (mm) S45C Aluminum Brass 6.9 26.5 100.9 ø1.0 ø1.9 ø2.8 ø1.5 ø2.9 ø3.8 ø2.0 ø3.4 ø4.5 108 108 108 13.7 51.9 201.9 ø1.5 ø2.5 ø3.5 ø2.0 ø3.5 ø4.3 ø3.0 ø4.0 ø4.8 130 130 130 22.5 85.3 332.2 ø2.0 ø2.7 ø4.3 ø3.0 ø3.8 ø5.2 ø3.5 ø4.4 ø5.5 130 130 130 27 108 432 90º Angle Air Motor AM-600RA Slim Neck Spindle AMH-301 Collet CHM-[][] Use this table as a reference to extrapolate suitability for a given application. AM-3020R AM-3020R ARG-011E (1/4) AM-3020R ARG-021E (1/16) 3-p2 HES510 ø2.3 ø3.2 ø4.0 ø4.0 ø5.0 ø6.0 ø4.5 ø5.5 ø6.0 Xpeed 5 Transmission Clutch AIR LINE KIT Grindstone Arbor AGM-01 6 The connection part " " is "convex" The connection part " " is "concave" Spindle NR-601 PARTS 7 • AM-300R Torque-Speed Characteristics • AM-310R Torque-Speed Characteristics Proper Air Pressure 71PSI 56PSI 42PSI 8 7 6 5 4 3 0 10 8 6 4 2 5 10 15 20 Speed { x 103 min-1(rpm) } 25 30 0 AM-600R Torque-Speed Characteristics Proper Air Pressure 71PSI 56PSI 42PSI 12 2 1 • Proper Air Pressure 85PSI 71PSI 56PSI 6 5 Torque (cN.m) 6 4 Spindle NR-311 5 AIR LINE KIT ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 90º Angle Air Motor AM-310RA required for increased torque. Torque (cN.m) Xpeed MS Arbor for Metal Saw KCH-03 Torque (cN.m) HPS Air Motor AM-310R be connected between *May the motor and the spindle as Collet CHK-[][] HES510 HTS ø1.18" Speed Reducer ARG-02 (1 / 15.39 Reduction) Collet Nut K-265 ø0.897" ø1.0" ø0.98" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA 90º Angle Air Motor AM-300RA 90º Angle Spindle RA-200 (1 / 1.5 Reduction) ø1.18" HES810 3 Speed Reducer ARG-01 (1 / 3.92 Reduction) Arbor for Metal Saw KCH-02 MA E4000 Air Motor AM-300R TECHNICAL DATA 8 APPLICATION EXAMPLES 4 INDEX 3 2 1 5 10 15 20 Speed { x 103 min-1(rpm) } 25 30 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } *Do not exceed the maximum motor speed recommendation for the spindles. Excess speed will dramatically reduce bearing life. 3-p3 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p2 FEATURES & DRILLING CAPACITY REFERENCE TABLE MODULAR AIR SPINDLE MA SERIES MA Series Features 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER ø0.897"(ø22.8 mm) Modular Type MA Series ø0.897"(ø22.8 mm) System Chart slide NC lathes can be transformed into complex machining centers. •Gang Specialized design will be made compact and universal. •Mounting MAmachine on existing equipment can eliminate secondary operations or the equipment can be turned into a special purpose machine. •The MA SeriesSeries to secondary operation machines, single purpose machines or special machining and grinding machines. •The air motors areis applicable explosion and do not generate heat even in continuous use. •When MA Series is used at lowproof speed, a speed reducer (ARG-01, or other selections) is added in order to obtain the speed of your choice. •Collet, Jacobs drill chuck, saw arbormotor and grinding stone arbor are available for grinding, drilling, milling, slitting, chamfer and deburring operations. • • • 1 MA Series has been designed to operate smoothly at high speed for long continuous cutting and grinding by connecting an air line kit directly between the air compressor and the air motor. (Air Line Kit Refer to 3-p10 in detail) Air supply and exhaust air hoses are supplied with an air motor. Air supply hose is provided with metal fitting to connect to ø0.24"(ø6 mm) one-touch joint. Air exhaust hose is supplied with silencer. EmaxEVO ESPERT ROTUS IMPULSE PRESTO II Application Examples Collet Nut K-265 SHEENUS neo SONIC CUTTER Air Motor Spindle Collet CHK-[][] Spindle NR-303 Compressor Air Line Kit 2 2 Arbor for Metal Saw KCH-03 iSpeed3 iSpeed3 Spindle NR-2351 Compressor E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" Grindstone Arbor AGM-03 E3000 - One Piece 90º Angle Spindle RAS-101 (1 / 2.67 Reduction) E3000 - Modular E3000 - One Piece Air Line Kit AL-M1202. AL-M1203BS2 E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 90º Angle Spindle RA-100 (1 / 2.67 Reduction) Collet CH8-[][] 3 ø0.897" ø1.0" ø0.98" Collet CHS-[][] 4 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Drilling Capacity Reference Table HES810 Grindstone Flange NGF2-19 Air Motor AM-600R This table summarizes the drilling capacity for the MA Series spindles. Please use this table as a guide for the selection of the proper model given the torque, speed and size requirements for your application. Data is given for three materials Medium Carbon Steel (S45C), aluminum and brass. HTS HPS *Conditions : High speed steel drill was used with a feed rate of 60mm/min. Tool life was not considered in determining the above capacities. Combination as System Speed {min-1(rpm)} Output (W) Motor Speed Reducer Spindle AM-300R AM-300R AM-300R ARG-01 (1/3.92) ARG-02 (1/15.39) NR-2351 NR-2351 NR-2351 30,000 8,000 2,000 57 57 57 AM-310R AM-310R AM-310R ARG-01 (1/3.92) ARG-02 (1/15.39) NR-2351 NR-2351 NR-2351 30,000 8,000 2,000 AM-2526R AM-2526R ARG-2504N (1/4) AM-2526R ARG-2516N (1/16) NR-2551 NR-2551 NR-2551 24,000 6,000 1,500 NR-453E NR-453E NR-453E 19,000 4,750 1,190 Max. Torque (cN·m ) Max. Drill Diameter for drilling (mm) S45C Aluminum Brass 6.9 26.5 100.9 ø1.0 ø1.9 ø2.8 ø1.5 ø2.9 ø3.8 ø2.0 ø3.4 ø4.5 108 108 108 13.7 51.9 201.9 ø1.5 ø2.5 ø3.5 ø2.0 ø3.5 ø4.3 ø3.0 ø4.0 ø4.8 130 130 130 22.5 85.3 332.2 ø2.0 ø2.7 ø4.3 ø3.0 ø3.8 ø5.2 ø3.5 ø4.4 ø5.5 130 130 130 27 108 432 90º Angle Air Motor AM-600RA Slim Neck Spindle AMH-301 Collet CHM-[][] Use this table as a reference to extrapolate suitability for a given application. AM-3020R AM-3020R ARG-011E (1/4) AM-3020R ARG-021E (1/16) 3-p2 HES510 ø2.3 ø3.2 ø4.0 ø4.0 ø5.0 ø6.0 ø4.5 ø5.5 ø6.0 Xpeed 5 Transmission Clutch AIR LINE KIT Grindstone Arbor AGM-01 6 The connection part " " is "convex" The connection part " " is "concave" Spindle NR-601 PARTS 7 • AM-300R Torque-Speed Characteristics • AM-310R Torque-Speed Characteristics Proper Air Pressure 71PSI 56PSI 42PSI 8 7 6 5 4 3 0 10 8 6 4 2 5 10 15 20 Speed { x 103 min-1(rpm) } 25 30 0 AM-600R Torque-Speed Characteristics Proper Air Pressure 71PSI 56PSI 42PSI 12 2 1 • Proper Air Pressure 85PSI 71PSI 56PSI 6 5 Torque (cN.m) 6 4 Spindle NR-311 5 AIR LINE KIT ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 90º Angle Air Motor AM-310RA required for increased torque. Torque (cN.m) Xpeed MS Arbor for Metal Saw KCH-03 Torque (cN.m) HPS Air Motor AM-310R be connected between *May the motor and the spindle as Collet CHK-[][] HES510 HTS ø1.18" Speed Reducer ARG-02 (1 / 15.39 Reduction) Collet Nut K-265 ø0.897" ø1.0" ø0.98" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA 90º Angle Air Motor AM-300RA 90º Angle Spindle RA-200 (1 / 1.5 Reduction) ø1.18" HES810 3 Speed Reducer ARG-01 (1 / 3.92 Reduction) Arbor for Metal Saw KCH-02 MA E4000 Air Motor AM-300R TECHNICAL DATA 8 APPLICATION EXAMPLES 4 INDEX 3 2 1 5 10 15 20 Speed { x 103 min-1(rpm) } 25 30 0 10 20 30 40 50 60 Speed { x 103 min-1(rpm) } *Do not exceed the maximum motor speed recommendation for the spindles. Excess speed will dramatically reduce bearing life. 3-p3 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p4 HIGH-TORQUE AIR MOTOR O.D. ø0.897"(ø22.8 mm) diameter ø0.897"(ø22.8 mm). • Small Ultra-precision type air motor. • Outside housingvane is made of stainless steel (SUS416). • 1 CAT. No. AS11397 AIR MOTOR AM-300R (Forward Rotation) 57W 30,000 min-1(rpm) CAT. No. AS41081 90°ANGLE TYPE AIR MOTOR AM-310RA (Forward Rotation) 108W 30,000 min-1(rpm) EmaxEVO • Motor Speed .................................. 30,000 min-1(rpm) (56PSI) • Max. Output Power ..................................................... 57W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 3.18CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ............. Air Intake I.D. ø3.7 mm x O.D. ø5.7 mm Exhaust Air I.D. ø5.0 mm x O.D. ø6.5 mm • Weight (w/o hose) ................................................... 4.76 oz. 0.28" 0 ø22.8-0.02 mm (ø0.897") ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER • Motor Speed ................................... 30,000 min-1(rpm) (71PSI) • Max. Output Power .................................................... 108W • Proper Air Pressure ............................................... 42~71PSI • Air Consumption ................................................... 6.00CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.0 mm x O.D. ø6.0 mm 3.23" 0.53" ø0.89" 2.58" 0 ø22.8-0.02 mm (ø0.897") ESPERT Exhaust Air I.D. ø5.5 mm x O.D. ø8.0 mm • Weight (w/o hose) ................................................... 8.61 oz. 2 • Silencer ø1.0"/ø0.98" E3000 - One Piece E3000 - Modular • Silencer Air Motor E2530 / E2550 ø0.897" CAT. No. Ultra precision, compact, vane-type air motor provides high torque •with small volume of air consumption. Withstands long continuous operation without heat generation. Silencer keeps noise to a minimum. 90˚ Angle Type Air Motor (R=Forward, L=Reverse) Model AS11397 AM-300R AS81083 AM-300L Standard Equipment · Accessories Price • Hose (K-221) : 6 ft • Silencer (K-209) • Wrench (20 x 24) : 1 pc. CAT. No. Model AS41081 AM-310RA AS81082 AM-310LA Air hose is attached on the rear end of air motor at •90° angle which decreases the installation space. (RA=Forward, LA=Reverse) Standard Equipment · Accessories SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" E2530 / E2550 • Hose (K-215) : ø6 mm x 6 ft • Hose (K-216) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. ø0.897" E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" ø0.897" AS11395 90°ANGLE TYPE AIR MOTOR AM-300RA (Forward Rotation) 57W 2.83" 0.53" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.89" 0 ø22.8-0.02 mm (ø0.897") ø0.897" 30,000 min-1(rpm) • Motor Speed .................................. 30,000 min-1(rpm) (56PSI) • Max. Output Power ..................................................... 57W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 3.18CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ............. Air Intake I.D. ø4.0 mm x O.D. ø6.0 mm Exhaust Air I.D. ø5.5 mm x O.D. ø8.0 mm • Weight (w/o hose) ................................................... 6.21 oz. CAT. No. AS11071 AIR MOTOR AM-600R (Forward Rotation) 76W 58,000 min-1(rpm) 4.83" 3.15" Exhaust Air I.D. ø5.5 mm x O.D. ø7.5 mm • Weight (w/o hose) ................................................... 7.58 oz. • Silencer 4 90˚ Angle Type Air Motor CAT. No. HES510 Model AS11395 AM-300RA AS81084 AM-300LA on the rear end of air motor •atAir90°hoseangleis attached which decreases the installation space. (RA=Forward, LA=Reverse) Standard Equipment · Accessories • Silencer Price • Hose (K-215) : ø6 mm x 6 ft • Hose (K-216) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. Assembled with high quality ball bearings enabling higher grinding •power at a maximum speed of 58,000 min (rpm). Suitable for very -1 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 Air Motor CAT. No. E3000 - 80,000rpm E4000 • Motor Speed ................................... 58,000 min-1(rpm) (85PSI) • Max. Output Power ...................................................... 76W • Proper Air Pressure ............................................... 56~85PSI • Air Consumption ................................................... 5.12CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.5 mm x O.D. ø6.7 mm ø22.8-0.02 -0.03 mm (ø0.897") CAT. No. MA HTS PRESTO II ø1.18" 3 HES810 IMPULSE E2530 / E2550 Price ø1.0"/ø0.98" ø0.897" E4000 ROTUS iSpeed3 ø1.18" E3000 - 80,000rpm ESPERT 2 ø0.24" • Filter Joint iSpeed3 E2530 / E2550 1 EmaxEVO Model AS11071 AM-600R precise processing works. Standard Equipment · Accessories Price • Hose (K-204) : 6 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 CAT. No. AS41079 AIR MOTOR AM-310R (Forward Rotation) 108W 30,000 min-1(rpm) CAT. No. AS12512 90°ANGLE TYPE AIR MOTOR AM-600RA (Forward Rotation) 69W 55,000 min-1(rpm) AIR LINE KIT 0.28" 0 ø22.8-0.02 mm (ø0.897") PARTS 7 • Motor Speed .................................. 30,000 min-1(rpm) (71PSI) • Max. Output Power ................................................... 108W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 6.71CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ............. Air Intake I.D. ø4.5 mm x O.D. ø6.7 mm 2.97" Exhaust Air I.D. ø5.5 mm x O.D. ø7.5 mm • Weight (w/o hose) ................................................... 7.16 oz. 8 3.69" 0.54" -0.02 ø22.8-0.03 mm (ø0.897") 6 TECHNICAL DATA • Motor Speed ................................... 55,000 min-1(rpm) (85PSI) • Max. Output Power ...................................................... 69W • Proper Air Pressure ............................................... 56~85PSI • Air Consumption ................................................... 4.94CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.0 mm x O.D. ø6.0 mm Exhaust Air I.D. ø5.5 mm x O.D. ø8.0 mm • Weight (w/o hose) ................................................... 8.99 oz. APPLICATION EXAMPLES 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES • Filter Joint ø0.24" • Silencer • Silencer INDEX Air Motor CAT. No. Ultra-precision, compact, vane-type air motor provides high torque •with small volume of air consumption. Withstands long continuous operation without heat generation. Silencer keeps noise to a minimum. 3-p4 5 AIR LINE KIT Model AS41079 AM-310R AS81085 AM-310L Standard Equipment · Accessories • Hose (K-204) : 6 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. INDEX 90˚ Angle Type Air Motor (R=Forward, L=Reverse) Price CAT. No. Air hose is attached on the rear end of air motor at •90° angle which decreases the installation space. Model AS12512 AM-600RA Standard Equipment · Accessories Price • Hose (K-215) : ø6 mm x 6 ft • Hose (K-216) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. * Order by catalog number. 3-p5 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p4 HIGH-TORQUE AIR MOTOR O.D. ø0.897"(ø22.8 mm) diameter ø0.897"(ø22.8 mm). • Small Ultra-precision type air motor. • Outside housingvane is made of stainless steel (SUS416). • 1 CAT. No. AS11397 AIR MOTOR AM-300R (Forward Rotation) 57W 30,000 min-1(rpm) CAT. No. AS41081 90°ANGLE TYPE AIR MOTOR AM-310RA (Forward Rotation) 108W 30,000 min-1(rpm) EmaxEVO • Motor Speed .................................. 30,000 min-1(rpm) (56PSI) • Max. Output Power ..................................................... 57W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 3.18CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ............. Air Intake I.D. ø3.7 mm x O.D. ø5.7 mm Exhaust Air I.D. ø5.0 mm x O.D. ø6.5 mm • Weight (w/o hose) ................................................... 4.76 oz. 0.28" 0 ø22.8-0.02 mm (ø0.897") ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER • Motor Speed ................................... 30,000 min-1(rpm) (71PSI) • Max. Output Power .................................................... 108W • Proper Air Pressure ............................................... 42~71PSI • Air Consumption ................................................... 6.00CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.0 mm x O.D. ø6.0 mm 3.23" 0.53" ø0.89" 2.58" 0 ø22.8-0.02 mm (ø0.897") ESPERT Exhaust Air I.D. ø5.5 mm x O.D. ø8.0 mm • Weight (w/o hose) ................................................... 8.61 oz. 2 • Silencer ø1.0"/ø0.98" E3000 - One Piece E3000 - Modular • Silencer Air Motor E2530 / E2550 ø0.897" CAT. No. Ultra precision, compact, vane-type air motor provides high torque •with small volume of air consumption. Withstands long continuous operation without heat generation. Silencer keeps noise to a minimum. 90˚ Angle Type Air Motor (R=Forward, L=Reverse) Model AS11397 AM-300R AS81083 AM-300L Standard Equipment · Accessories Price • Hose (K-221) : 6 ft • Silencer (K-209) CAT. No. AS41081 AM-310RA AS81082 AM-310LA Air hose is attached on the rear end of air motor at •90° angle which decreases the installation space. • Wrench (20 x 24) : 1 pc. Model (RA=Forward, LA=Reverse) Standard Equipment · Accessories SHEENUS neo SONIC CUTTER ø1.0"/ø0.98" E2530 / E2550 • Hose (K-215) : ø6 mm x 6 ft • Hose (K-216) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. ø0.897" E3000 - One Piece E3000 - Modular ø1.0"/ø0.98" ø0.897" AS11395 90°ANGLE TYPE AIR MOTOR AM-300RA (Forward Rotation) 57W 2.83" 0.53" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.89" 0 ø22.8-0.02 mm (ø0.897") ø0.897" 30,000 min-1(rpm) • Motor Speed .................................. 30,000 min-1(rpm) (56PSI) • Max. Output Power ..................................................... 57W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 3.18CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ............. Air Intake I.D. ø4.0 mm x O.D. ø6.0 mm Exhaust Air I.D. ø5.5 mm x O.D. ø8.0 mm • Weight (w/o hose) ................................................... 6.21 oz. CAT. No. AS11071 AIR MOTOR AM-600R (Forward Rotation) 76W 58,000 min-1(rpm) 4.83" 3.15" Exhaust Air I.D. ø5.5 mm x O.D. ø7.5 mm • Weight (w/o hose) ................................................... 7.58 oz. • Silencer 4 90˚ Angle Type Air Motor CAT. No. HES510 Model AS11395 AM-300RA AS81084 AM-300LA on the rear end of air motor •atAir90°hoseangleis attached which decreases the installation space. (RA=Forward, LA=Reverse) Standard Equipment · Accessories • Silencer Price • Hose (K-215) : ø6 mm x 6 ft • Hose (K-216) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. Assembled with high quality ball bearings enabling higher grinding •power at a maximum speed of 58,000 min (rpm). Suitable for very -1 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 Air Motor CAT. No. E3000 - 80,000rpm E4000 • Motor Speed ................................... 58,000 min-1(rpm) (85PSI) • Max. Output Power ...................................................... 76W • Proper Air Pressure ............................................... 56~85PSI • Air Consumption ................................................... 5.12CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.5 mm x O.D. ø6.7 mm ø22.8-0.02 -0.03 mm (ø0.897") CAT. No. MA HTS PRESTO II ø1.18" 3 HES810 IMPULSE E2530 / E2550 Price ø1.0"/ø0.98" ø0.897" E4000 ROTUS iSpeed3 ø1.18" E3000 - 80,000rpm ESPERT 2 ø0.24" • Filter Joint iSpeed3 E2530 / E2550 1 EmaxEVO Model AS11071 AM-600R precise processing works. Standard Equipment · Accessories Price • Hose (K-204) : 6 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 CAT. No. AS41079 AIR MOTOR AM-310R (Forward Rotation) 108W 30,000 min-1(rpm) CAT. No. AS12512 90°ANGLE TYPE AIR MOTOR AM-600RA (Forward Rotation) 69W 55,000 min-1(rpm) AIR LINE KIT 0.28" 0 ø22.8-0.02 mm (ø0.897") PARTS 7 • Motor Speed .................................. 30,000 min-1(rpm) (71PSI) • Max. Output Power ................................................... 108W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 6.71CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ............. Air Intake I.D. ø4.5 mm x O.D. ø6.7 mm 2.97" Exhaust Air I.D. ø5.5 mm x O.D. ø7.5 mm • Weight (w/o hose) ................................................... 7.16 oz. 8 3.69" 0.54" -0.02 ø22.8-0.03 mm (ø0.897") 6 TECHNICAL DATA • Motor Speed ................................... 55,000 min-1(rpm) (85PSI) • Max. Output Power ...................................................... 69W • Proper Air Pressure ............................................... 56~85PSI • Air Consumption ................................................... 4.94CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.0 mm x O.D. ø6.0 mm Exhaust Air I.D. ø5.5 mm x O.D. ø8.0 mm • Weight (w/o hose) ................................................... 8.99 oz. APPLICATION EXAMPLES 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES • Filter Joint ø0.24" • Silencer • Silencer INDEX Air Motor CAT. No. Ultra-precision, compact, vane-type air motor provides high torque •with small volume of air consumption. Withstands long continuous operation without heat generation. Silencer keeps noise to a minimum. 3-p4 5 AIR LINE KIT Model AS41079 AM-310R AS81085 AM-310L Standard Equipment · Accessories • Hose (K-204) : 6 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. INDEX 90˚ Angle Type Air Motor (R=Forward, L=Reverse) Price CAT. No. Air hose is attached on the rear end of air motor at •90° angle which decreases the installation space. Model AS12512 AM-600RA Standard Equipment · Accessories Price • Hose (K-215) : ø6 mm x 6 ft • Hose (K-216) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (20 x 24) : 1 pc. * Order by catalog number. 3-p5 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p6 SPINDLE O.D. ø0.897"(ø22.8 mm) COOLANT MA Series can be used in conjunction with water or oil based coolants. Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT *Do not exceed the allowable motor speed for the spindle. AS41830 SPINDLE NR-303 AS51094 90° ANGLE SPINDLE RAS-101 CAT. No. 30,000 min-1(rpm) EmaxEVO ROTUS IMPULSE (1.97") Max. Tool Mounting Depth 0.67" 3.02" 2 ø0.63" SHEENUS neo SONIC CUTTER ø22.8 -00.01 mm (ø0.897") PRESTO II 0.85" iSpeed3 1.38" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm (1.97") Max. Tool Mounting Depth 0.67" 2.95" 0.80" Recommended Clamping Area Maximum rotating speed at the cutting tool 7,490 min-1(rpm) Reduction Ratio 1 2.67 ø1.0"/ø0.98" Spindle E2530 / E2550 ø0.897" CAT. No. E3000 - One Piece E3000 - Modular ø1.18" • This spindle is ideal for small diameter drilling, milling and grinding. A wide selection of collets and accessories is available. ø1.0"/ø0.98" ø0.897" Maximum allowable motor speed for the spindle Model AS41830 NR-303 Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. 20,000 min-1(rpm) ø22.8 mm (ø0.897") 0 -0.01 • 90˚Angle type spindle with wide chucking range up to ø1/4"(ø6.35 mm) is suitable for installations where space restrictions exist. E3000 - 80,000rpm Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) ROTUS IMPULSE < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel I.D. of ø5 mm Model AS51094 RAS-101 Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. 50,000 min-1(rpm) (1.97") Max. Tool Mounting Depth 0.67" 3.02" ø0.63" ø22.8 -00.01 mm (ø0.897") MS HES510 0.87" 1.38" Recommended Clamping Area HES810 < Optional > • Collet (CHK-[][]) ....................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm ø0.90" 1.95" Recommended Clamping Area 0 ø22.8-0.01 mm (ø0.897") ø1.18" Reduction Ratio 1 2.67 8 APPLICATION EXAMPLES INDEX • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. Price 20,000 min-1(rpm) 7,490 min-1(rpm) 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) ø0.897" (rpm) ø1.18" < Optional > • Collet (CH8-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) 90° Angle Spindle Model AS11411 RA-100 1.06" Recommended Clamping Area ø0.31" Reduction Ratio 1 1.5 4 HES510 Price HTS HPS • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (20 x 24) : 1 pc. each. Xpeed 5 2.70" ø0.69" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 Standard Equipment · Accessories AIR LINE KIT AS11412 90° ANGLE SPINDLE RA-200 CAT. No. ø1.0" ø0.98" MS • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight .................................................................. 9.56 oz. etc. with the use of ø1.18"(ø30 mm) Metal Saw. Maximum rotating speed at the cutting tool Maximum allowable motor speed for the spindle 20,000 min-1(rpm) 13,330 min-1(rpm) This spindle can be used for working on corners difficult to work or •unfit for working with straight type, drilling on side face, etc. 3-p6 E3000 - Modular 3 Maximum allowable motor speed for the spindle CAT. No. spindle is capable of working on corners difficult to work with •This straight type, drilling on side face and, slitting of aluminum, brass, 0.59" 7 TECHNICAL DATA AS18220 NR-2351 Standard Equipment · Accessories 1.12" PARTS • This spindle is ideal for ultra-precision, small diameter drilling, milling and grinding. A wide selection of collets and accessories is available. Model (0.26") CAT. No. (1.22") Max. Tool Mounting Depth Spindle HPS Maximum allowable motor speed for the spindle Maximum rotating speed at the cutting tool ø0.35" HTS 6 ø0.897" MA 0 ø22.8-0.01 mm (ø0.897") • Allowable Motor Speed ............................... 50,000 min (rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. -1 ø1.0" ø0.98" AIR LINE KIT ø1.0"/ø0.98" E2530 / E2550 E3000 - 80,000rpm 3.20" ø0.897" 5 E2530 / E2550 ø1.0"/ø0.98" ø0.897" AS11411 90° ANGLE SPINDLE RA-100 1.58" 0.79" AS18220 SPINDLE NR-2351 (Ceramic Bearings) 0.32" CAT. No. CAT. No. (1.26") Max. Tool Mounting Depth 3 Xpeed 2 iSpeed3 E4000 MA 4 SHEENUS neo SONIC CUTTER ø1.18" E4000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II E3000 - One Piece 90° Angle Spindle CAT. No. ESPERT (rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) ................................. ø1/8" • Weight ................................................................ 11.46 oz. 1.10" Recommended Clamping Area E2530 / E2550 0.55" 0 ø22.8-0.01 mm (ø0.897") ø0.63" • Allowable Motor Speed ............................... 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. ESPERT 1 EmaxEVO 1.85" CAT. No. 1 6 Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) ................................. ø1/8" • Weight ................................................................. 5.82 oz. < Optional > • Collet (CHS-[][]) .................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 90° Angle Spindle CAT. No. Model AS11412 RA-200 Standard Equipment · Accessories Price • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (20 x 24) : 1 pc. each. * Order by catalog number. 3-p7 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p6 SPINDLE O.D. ø0.897"(ø22.8 mm) COOLANT MA Series can be used in conjunction with water or oil based coolants. Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT *Do not exceed the allowable motor speed for the spindle. AS41830 SPINDLE NR-303 AS51094 90° ANGLE SPINDLE RAS-101 CAT. No. 30,000 min-1(rpm) EmaxEVO ROTUS IMPULSE (1.97") Max. Tool Mounting Depth 0.67" 3.02" 2 ø0.63" SHEENUS neo SONIC CUTTER ø22.8 -00.01 mm (ø0.897") PRESTO II 0.85" iSpeed3 1.38" < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ........ For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm (1.97") Max. Tool Mounting Depth 0.67" 2.95" 0.80" Recommended Clamping Area Maximum rotating speed at the cutting tool 7,490 min-1(rpm) Reduction Ratio 1 2.67 ø1.0"/ø0.98" Spindle E2530 / E2550 ø0.897" CAT. No. E3000 - One Piece E3000 - Modular ø1.18" • This spindle is ideal for small diameter drilling, milling and grinding. A wide selection of collets and accessories is available. ø1.0"/ø0.98" ø0.897" Maximum allowable motor speed for the spindle Model AS41830 NR-303 Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. 20,000 min-1(rpm) ø22.8 mm (ø0.897") 0 -0.01 • 90˚Angle type spindle with wide chucking range up to ø1/4"(ø6.35 mm) is suitable for installations where space restrictions exist. E3000 - 80,000rpm Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) ROTUS IMPULSE < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel I.D. of ø5 mm Model AS51094 RAS-101 Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. 50,000 min-1(rpm) (1.97") Max. Tool Mounting Depth 0.67" 3.02" ø0.63" ø22.8 -00.01 mm (ø0.897") MS HES510 0.87" 1.38" Recommended Clamping Area HES810 < Optional > • Collet (CHK-[][]) ....................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm ø0.90" 1.95" Recommended Clamping Area 0 ø22.8-0.01 mm (ø0.897") ø1.18" Reduction Ratio 1 2.67 8 APPLICATION EXAMPLES INDEX • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. Price 20,000 min-1(rpm) 7,490 min-1(rpm) 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) ø0.897" (rpm) ø1.18" < Optional > • Collet (CH8-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) 90° Angle Spindle Model AS11411 RA-100 1.06" Recommended Clamping Area ø0.31" Reduction Ratio 1 1.5 4 HES510 Price HTS HPS • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (20 x 24) : 1 pc. each. Xpeed 5 2.70" ø0.69" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 Standard Equipment · Accessories AIR LINE KIT AS11412 90° ANGLE SPINDLE RA-200 CAT. No. ø1.0" ø0.98" MS • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight .................................................................. 9.56 oz. etc. with the use of ø1.18"(ø30 mm) Metal Saw. Maximum rotating speed at the cutting tool Maximum allowable motor speed for the spindle 20,000 min-1(rpm) 13,330 min-1(rpm) This spindle can be used for working on corners difficult to work or •unfit for working with straight type, drilling on side face, etc. 3-p6 E3000 - Modular 3 Maximum allowable motor speed for the spindle CAT. No. spindle is capable of working on corners difficult to work with •This straight type, drilling on side face and, slitting of aluminum, brass, 0.59" 7 TECHNICAL DATA AS18220 NR-2351 Standard Equipment · Accessories 1.12" PARTS • This spindle is ideal for ultra-precision, small diameter drilling, milling and grinding. A wide selection of collets and accessories is available. Model (0.26") CAT. No. (1.22") Max. Tool Mounting Depth Spindle HPS Maximum allowable motor speed for the spindle Maximum rotating speed at the cutting tool ø0.35" HTS 6 ø0.897" MA 0 ø22.8-0.01 mm (ø0.897") • Allowable Motor Speed ............................... 50,000 min (rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. -1 ø1.0" ø0.98" AIR LINE KIT ø1.0"/ø0.98" E2530 / E2550 E3000 - 80,000rpm 3.20" ø0.897" 5 E2530 / E2550 ø1.0"/ø0.98" ø0.897" AS11411 90° ANGLE SPINDLE RA-100 1.58" 0.79" AS18220 SPINDLE NR-2351 (Ceramic Bearings) 0.32" CAT. No. CAT. No. (1.26") Max. Tool Mounting Depth 3 Xpeed 2 iSpeed3 E4000 MA 4 SHEENUS neo SONIC CUTTER ø1.18" E4000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" PRESTO II E3000 - One Piece 90° Angle Spindle CAT. No. ESPERT (rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) ................................. ø1/8" • Weight ................................................................ 11.46 oz. 1.10" Recommended Clamping Area E2530 / E2550 0.55" 0 ø22.8-0.01 mm (ø0.897") ø0.63" • Allowable Motor Speed ............................... 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 7.58 oz. ESPERT 1 EmaxEVO 1.85" CAT. No. 1 6 Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) ................................. ø1/8" • Weight ................................................................. 5.82 oz. < Optional > • Collet (CHS-[][]) .................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 90° Angle Spindle CAT. No. Model AS11412 RA-200 Standard Equipment · Accessories Price • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (20 x 24) : 1 pc. each. * Order by catalog number. 3-p7 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p8 SPINDLE O.D. ø0.897"(ø22.8 mm) SPEED REDUCER O.D. ø0.897"(ø22.8 mm) Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT *Do not exceed the allowable motor speed for the spindle. CAT. No. 1 AS42511 SPINDLE NR-311 30,000 min-1(rpm) CAT. No. AS11414 SPEED REDUCER 1/3.92 ARG-01 1 EmaxEVO EmaxEVO • Allowable Motor Speed .............................. 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 13.50 oz. PRESTO II SHEENUS neo SONIC CUTTER 2 0 ø35-0.01 mm (ø1.38") ø21.4 mm (ø0.84") ø0.63" IMPULSE 0 ø22.8-0.01 mm (ø0.897") ROTUS (1.97") Max. Tool Mounting Depth (0.89") 3.43" (2.18") 0.49" 0.20" 1.25" 1.22" 0.96" Recommended Clamping Area Maximum allowable motor speed 1.65" Maximum rotating speed at the cutting tool 0 ø22.8-0.01 mm (ø0.897") ESPERT < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Flange (NGF2-19) ... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm Maximum rotating speed at the cutting tool 7,650 min-1(rpm) Reduction Ratio 1 3.92 E2530 / E2550 ø0.897" • Large precision angular ball bearings are assembled on the front part of the spindle to provide rigidity on both the radial and the thrust sides. This spindle is suitable for grinding of deep hole, grinding by ø1.57" (40 mm) grindstone and small-diameter end milling. E3000 - One Piece E3000 - Modular CAT. No. 7,650 min -1 (rpm) ROTUS IMPULSE CAT. No. AS42511 NR-311 Standard Equipment · Accessories Price • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. PRESTO II SHEENUS neo SONIC CUTTER 2 30,000 min-1(rpm) iSpeed3 Speed Reducer 1/3.92 Model ESPERT (rpm) Maximum allowable motor speed Spindle ø1.0"/ø0.98" -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 3.81 oz. iSpeed3 E2530 / E2550 30,000 min Speed Reduction Ratio Model Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 AS11414 ARG-01 ø0.897" Speed Reduction Ratio 1/3.92 E3000 - One Piece E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm CAT. No. E4000 3 • Allowable Motor Speed .............................. 30,000 min (rpm) • Standard Size Collet (CHM-3.175) ................................. ø1/8" • Weight .................................................................. 6.03 oz. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 < Optional > • Collet (CHM-[][]) ................................... ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Grindstone Arbor (AGM-01) ..... For grinding wheel with I.D. of ø5 mm 1,940 min-1(rpm) AGM-01, this spindle is suitable for the inner grinding of ø0.59" or more and with the depth of 1.57" or less. HPS Model AS11510 AMH-301 Standard Equipment · Accessories Price • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1), (6 x 4.5), (20 x 24) : 1 pc. each 3 MA (rpm) -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................. 5.22 oz. ø0.897" ø1.0" ø0.98" ø1.18" Reduction Ratio 1 15.39 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Maximum allowable motor speed 30,000 min-1(rpm) CAT No. the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping the motor speed unchanged. Model Speed Reduction Ratio Price 4 HES510 AS11428 ARG-02 Speed Reduction Ratio 1/15.39 HES810 HTS HPS Xpeed 5 CAT. No. AS11073 SPINDLE NR-601 60,000 min-1(rpm) AIR LINE KIT 5 AIR LINE KIT 6 • Adaptable Motor ............................................ AM-600R (RA) • Allowable Motor Speed .............................. 60,000 min-1(rpm) • Standard Size Collet (CHM-3.175) ................................. ø1/8" • Weight ................................................................... 7.4 oz. (1.18") Max. Tool Mounting Depth PARTS 2.99" 0.31" ø0.32" ø0.71" 0 ø22.8-0.01 (ø0.90") 0.55" 7 8 1,940 min (rpm) -1 Speed Reducer 1/15.39 Xpeed APPLICATION EXAMPLES Maximum rotating speed at the cutting tool 30,000 min MS Recommended Clamping Area Suitable for the grinding of the inner surface of slender and deep holes. •(Example) If a ø0.55" grindstone is mounted on the grinding arbor E4000 Maximum allowable motor speed Spindle HTS TECHNICAL DATA 2.21" Maximum rotating speed at the cutting tool CAT. No. E3000 - 80,000rpm AS11428 SPEED REDUCER 1/15.39 ARG-02 0.98" 1.65" 4 HES510 CAT. No. 0 ø22.8-0.01 mm (ø0.897") ø0.31" ø0.51" ø1.0" ø0.98" 0 ø22.8-0.01 mm (ø0.897") (1.18") Max. Tool Mounting Depth 0.26" 3.29" 1.52" ø0.897" MS 30,000 min-1(rpm) -1 MA ø1.18" AS11510 SPINDLE AMH-301 0.79" < Optional > • Collet (CHM-[][]) ................................... ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Grindstone Arbor (AGM-01) ..... For grinding wheel with I.D. of ø5 mm 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES 1.50 Recommended Clamping Area INDEX CAT. No. This spindle with high-speed rotation is suitable for internal grinding. •Also ideal for small-diameter drilling of higher accuracy. 3-p8 INDEX Spindle Model AS11073 NR-601 Standard Equipment · Accessories Price • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1) : 2 pcs., (6 x 4.5), (20 x 24) : 1 pc. each * Order by catalog number. 3-p9 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p8 SPINDLE O.D. ø0.897"(ø22.8 mm) SPEED REDUCER O.D. ø0.897"(ø22.8 mm) Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. COOLANT *Do not exceed the allowable motor speed for the spindle. CAT. No. 1 AS42511 SPINDLE NR-311 30,000 min-1(rpm) CAT. No. AS11414 SPEED REDUCER 1/3.92 ARG-01 1 EmaxEVO EmaxEVO • Allowable Motor Speed .............................. 30,000 min-1(rpm) • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 13.50 oz. PRESTO II SHEENUS neo SONIC CUTTER 2 0 ø35-0.01 mm (ø1.38") ø21.4 mm (ø0.84") ø0.63" IMPULSE 0 ø22.8-0.01 mm (ø0.897") ROTUS (1.97") Max. Tool Mounting Depth (0.89") 3.43" (2.18") 0.49" 0.20" 1.25" 1.22" 0.96" Recommended Clamping Area Maximum allowable motor speed 1.65" Maximum rotating speed at the cutting tool 0 ø22.8-0.01 mm (ø0.897") ESPERT < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Flange (NGF2-19) ... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm Maximum rotating speed at the cutting tool 7,650 min-1(rpm) Reduction Ratio 1 3.92 E2530 / E2550 ø0.897" • Large precision angular ball bearings are assembled on the front part of the spindle to provide rigidity on both the radial and the thrust sides. This spindle is suitable for grinding of deep hole, grinding by ø1.57" (40 mm) grindstone and small-diameter end milling. E3000 - One Piece E3000 - Modular CAT. No. 7,650 min -1 (rpm) ROTUS IMPULSE CAT. No. AS42511 NR-311 Standard Equipment · Accessories Price • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc. PRESTO II SHEENUS neo SONIC CUTTER 2 30,000 min-1(rpm) iSpeed3 Speed Reducer 1/3.92 Model ESPERT (rpm) Maximum allowable motor speed Spindle ø1.0"/ø0.98" -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 3.81 oz. iSpeed3 E2530 / E2550 30,000 min Speed Reduction Ratio Model Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 AS11414 ARG-01 ø0.897" Speed Reduction Ratio 1/3.92 E3000 - One Piece E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm CAT. No. E4000 3 • Allowable Motor Speed .............................. 30,000 min (rpm) • Standard Size Collet (CHM-3.175) ................................. ø1/8" • Weight .................................................................. 6.03 oz. ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 < Optional > • Collet (CHM-[][]) ................................... ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Grindstone Arbor (AGM-01) ..... For grinding wheel with I.D. of ø5 mm 1,940 min-1(rpm) AGM-01, this spindle is suitable for the inner grinding of ø0.59" or more and with the depth of 1.57" or less. HPS Model AS11510 AMH-301 Standard Equipment · Accessories Price • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1), (6 x 4.5), (20 x 24) : 1 pc. each 3 MA (rpm) -1 • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................. 5.22 oz. ø0.897" ø1.0" ø0.98" ø1.18" Reduction Ratio 1 15.39 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Maximum allowable motor speed 30,000 min-1(rpm) CAT No. the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping the motor speed unchanged. Model Speed Reduction Ratio Price 4 HES510 AS11428 ARG-02 Speed Reduction Ratio 1/15.39 HES810 HTS HPS Xpeed 5 CAT. No. AS11073 SPINDLE NR-601 60,000 min-1(rpm) AIR LINE KIT 5 AIR LINE KIT 6 • Adaptable Motor ............................................ AM-600R (RA) • Allowable Motor Speed .............................. 60,000 min-1(rpm) • Standard Size Collet (CHM-3.175) ................................. ø1/8" • Weight ................................................................... 7.4 oz. (1.18") Max. Tool Mounting Depth PARTS 2.99" 0.31" ø0.32" ø0.71" 0 ø22.8-0.01 (ø0.90") 0.55" 7 8 1,940 min (rpm) -1 Speed Reducer 1/15.39 Xpeed APPLICATION EXAMPLES Maximum rotating speed at the cutting tool 30,000 min MS Recommended Clamping Area Suitable for the grinding of the inner surface of slender and deep holes. •(Example) If a ø0.55" grindstone is mounted on the grinding arbor E4000 Maximum allowable motor speed Spindle HTS TECHNICAL DATA 2.21" Maximum rotating speed at the cutting tool CAT. No. E3000 - 80,000rpm AS11428 SPEED REDUCER 1/15.39 ARG-02 0.98" 1.65" 4 HES510 CAT. No. 0 ø22.8-0.01 mm (ø0.897") ø0.31" ø0.51" ø1.0" ø0.98" 0 ø22.8-0.01 mm (ø0.897") (1.18") Max. Tool Mounting Depth 0.26" 3.29" 1.52" ø0.897" MS 30,000 min-1(rpm) -1 MA ø1.18" AS11510 SPINDLE AMH-301 0.79" < Optional > • Collet (CHM-[][]) ................................... ø1.0 mm~ø3.175 mm (See Page 6-p4 for details) • Grindstone Arbor (AGM-01) ..... For grinding wheel with I.D. of ø5 mm 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES 1.50 Recommended Clamping Area INDEX CAT. No. This spindle with high-speed rotation is suitable for internal grinding. •Also ideal for small-diameter drilling of higher accuracy. 3-p8 INDEX Spindle Model AS11073 NR-601 Standard Equipment · Accessories Price • Collet ø1/8" (CHM-3.175) : 1 pc. • Wrench (7 x 5.1) : 2 pcs., (6 x 4.5), (20 x 24) : 1 pc. each * Order by catalog number. 3-p9 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p10 AIR LINE KIT & OIL 1 4502 CAT. No. AIR LINE KIT AL-M1202 EmaxEVO 0.79" ESPERT ROTUS 11.81" 10.24" 0.79" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" IMPULSE PRESTO II ø6 mm 8.66" 6.69" CAT. No. Model 2-ø7mm E2530 / E2550 ø1.0"/ø0.98" E3000 - One Piece E3000 - Modular 4502 AL-M1202 1.18" 4.7 2" ø0.897" IMPULSE 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) iSpeed3 E2530 / E2550 ROTUS SHEENUS neo SONIC CUTTER PF1/4 2 ESPERT PRESTO II R3.5mm ø15mm SHEENUS neo SONIC CUTTER 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 CAT. No. 4503 E3000 - 80,000rpm AIR LINE KIT AL-M1203BS2 3 E4000 The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator MA ø0.897" ø6 mm ø1.0" ø0.98" PF1/4 and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 4-ø9 mm CAT. No. HES510 HTS ø1.0" ø0.98" MS Alarm Buzzer 4 HES810 ø0.897" ø1.18" Solenoid Operated Valve 12.60" 11.02" MS 3 MA 17.72" 19.29" 4503 Model AL-M1203 BS2 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p10 LUBRICATING OIL 6 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 PARTS Product Price 8 Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 7 TECHNICAL DATA Product Price APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p11 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p10 AIR LINE KIT & OIL 1 4502 CAT. No. AIR LINE KIT AL-M1202 EmaxEVO 0.79" ESPERT ROTUS 11.81" 10.24" 0.79" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" IMPULSE PRESTO II ø6 mm 8.66" 6.69" CAT. No. Model 2-ø7mm E2530 / E2550 ø1.0"/ø0.98" E3000 - One Piece E3000 - Modular 4502 AL-M1202 1.18" 4.7 2" ø0.897" IMPULSE 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) iSpeed3 E2530 / E2550 ROTUS SHEENUS neo SONIC CUTTER PF1/4 2 ESPERT PRESTO II R3.5mm ø15mm SHEENUS neo SONIC CUTTER 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 CAT. No. 4503 E3000 - 80,000rpm AIR LINE KIT AL-M1203BS2 3 E4000 The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator MA ø0.897" ø6 mm ø1.0" ø0.98" PF1/4 and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 4-ø9 mm CAT. No. HES510 HTS ø1.0" ø0.98" MS Alarm Buzzer 4 HES810 ø0.897" ø1.18" Solenoid Operated Valve 12.60" 11.02" MS 3 MA 17.72" 19.29" 4503 Model AL-M1203 BS2 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p10 LUBRICATING OIL 6 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 PARTS Product Price 8 Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 7 TECHNICAL DATA Product Price APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p11 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p12 MODULAR AIR SPINDLE MA SERIES Modular Type ø1.0" ø0.98" (ø25.4 mm) (ø25 mm) diameter ø1.0"(ø25.4 mm), ø0.98"(ø25 mm). • Small Ultra-precision vane type air motor. • Rigid stainless steel (SUS416) outer housing. • 1 EmaxEVO HIGH-TORQUE AIR MOTOR O.D. ø1.0", ø0.98"(ø25.4, ø25 mm) CAT. No. MA Series ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) System Chart AS81805P AIR MOTOR AM-H2526R (Forward Rotation) 130W 1 24,000 min-1(rpm) ESPERT ROTUS IMPULSE PRESTO II EmaxEVO ESPERT • • MA Series has been designed to operate smoothly at high speed for long continuous cutting and grinding by connecting an air line kit directly between the air compressor and the air motor. (Air Line Kit Refer to 3-p16 in detail) Air supply and exhaust air hoses are supplied with an air motor. Air supply hose is provided with metal fitting to connect to ø0.24"(ø6 mm) one-touch joint. Air exhaust hose is supplied with silencer. • Motor Speed ................................... 24,000 min-1(rpm) (71PSI) • Max. Output Power .................................................... 130W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption ................................................... 7.24CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.5 mm x O.D. ø6.7 mm Exhaust Air I.D. ø5.5 mm x O.D. ø7.5 mm • Weight (w/o hose) ................................................... 7.05 oz. 3.14" 0.28" D SHEENUS neo SONIC CUTTER 2 Air Motor Spindle Compressor iSpeed3 ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 Air Line Kit E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" • Filter Joint E2530 / E2550 ø1.0"/ø0.98" ø0.24" • Silencer ø0.897" CAT. No. E3000 - One Piece Collet CHK-[][] • Speed Reducer ARG-H2504N ARG-2504N (1/4 Reduction) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Arbor for Metal Saw KCH-03 Spindle NR-H2551 NR-2551 3 Speed Reducer ARG- H2516N ARG-2516N (1/16 Reduction) ø0.897" Grindstone Arbor AGM-03 ø1.18" * MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" AS81805P AS81806P AS81801P AS81802P D=ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) (R=Forward, L=Reverse) Model Outside Diameter Standard Equipment · Accessories AM-H2526R ø1.0" AM-H2526L (ø25.4 mm) AM-2526R ø0.98" Price ø1.18" ø1.0"/ø0.98" ø0.897" AM-2526L (ø25 mm) E4000 AS81807P AIR MOTOR AM-H2526RA (Forward Rotation) 120W 22,000 min-1(rpm) 90˚ Angle Type Air Motor AM-H2526RA AM-2526RA 3.39" 0.53" • Motor Speed ................................... 22,000 min-1(rpm) (71PSI) • Max. Output Power .................................................... 120W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption ................................................... 6.00CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ................... Air Intake I.D. ø4 mm x O.D. ø6 mm Exhaust Air I.D. ø5.5 mm x O.D. ø8 mm • Weight (w/o hose) ................................................... 8.50 oz. Transmission Clutch Air Motor The connection part "+" is "concave" The connection part "+" is "convex" Air Line Kit AL-M1202. AL-M1203BS2 The installation space is reduced by installing the air intake and •exhaust air hoses at 90˚ angle from the rear end of the motor. not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. • AM-2526 Torque-Speed Characteristics 7 24 INDEX ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 D=ø1.0" (ø25.4 mm), ø0.98" (ø25 mm) (R=Forward, L=Reverse) CAT. No. Model AS81807P AS81808P AS81803P AS81804P AM-H2526RA Outside Diameter Standard Equipment · Accessories ø0.98" AM-2526LA (ø25 mm) HTS HPS ø1.0" AM-H2526LA (ø25.4 mm) AM-2526RA Price • Hose (K-215) : ø6 mm x 6 ft • Hose (K-256) : ø8 mm x 3 ft • Silencer (K-209) • Wrench (22 x 27) : 1 pc. Xpeed 5 20 6 PARTS 7 71PSI TECHNICAL DATA 56PSI Torque (cN.m) 8 MS AIR LINE KIT TECHNICAL DATA APPLICATION EXAMPLES ø1.18" • Silencer Compressor 5 6 ø1.0" ø0.98" 4 Xpeed PARTS ø0.897" HES510 HTS AIR LINE KIT 3 MA May be connected between the motor and the spindle as required for increased torque. HES810 HPS ø0.897" E3000 - One Piece E3000 - Modular • Hose (K-204) : 6 ft • Silencer (K-208) • Wrench (22 x 27) : 1 pc. 4 HES510 E2530 / E2550 E3000 - 80,000rpm CAT. No. MA ø1.0" ø0.98" Air Motor AM-H2526R AM-2526R Ultra precision, compact, vane-type air motor provides high torque with small volume of air consumption. Withstands long continuous operation without heat generation. Silencer keeps noise to a minimum. ø0.97" ø1.18" Collet Nut K-265 D E3000 - Modular Air Motor 42PSI 16 8 12 APPLICATION EXAMPLES 8 INDEX 4 0 5 10 15 20 25 30 Speed { x 103 min-1(rpm) } 3-p12 * Order by catalog number. 3-p13 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:37 PM ページ 3-p12 MODULAR AIR SPINDLE MA SERIES Modular Type ø1.0" ø0.98" (ø25.4 mm) (ø25 mm) diameter ø1.0"(ø25.4 mm), ø0.98"(ø25 mm). • Small Ultra-precision vane type air motor. • Rigid stainless steel (SUS416) outer housing. • 1 EmaxEVO HIGH-TORQUE AIR MOTOR O.D. ø1.0", ø0.98"(ø25.4, ø25 mm) CAT. No. MA Series ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) System Chart AS81805P AIR MOTOR AM-H2526R (Forward Rotation) 130W 1 24,000 min-1(rpm) ESPERT ROTUS IMPULSE PRESTO II EmaxEVO ESPERT • • MA Series has been designed to operate smoothly at high speed for long continuous cutting and grinding by connecting an air line kit directly between the air compressor and the air motor. (Air Line Kit Refer to 3-p16 in detail) Air supply and exhaust air hoses are supplied with an air motor. Air supply hose is provided with metal fitting to connect to ø0.24"(ø6 mm) one-touch joint. Air exhaust hose is supplied with silencer. • Motor Speed ................................... 24,000 min-1(rpm) (71PSI) • Max. Output Power .................................................... 130W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption ................................................... 7.24CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .............. Air Intake I.D. ø4.5 mm x O.D. ø6.7 mm Exhaust Air I.D. ø5.5 mm x O.D. ø7.5 mm • Weight (w/o hose) ................................................... 7.05 oz. 3.14" 0.28" D SHEENUS neo SONIC CUTTER 2 Air Motor Spindle Compressor iSpeed3 ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 Air Line Kit E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" • Filter Joint E2530 / E2550 ø1.0"/ø0.98" ø0.24" • Silencer ø0.897" CAT. No. E3000 - One Piece Collet CHK-[][] • Speed Reducer ARG-H2504N ARG-2504N (1/4 Reduction) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Arbor for Metal Saw KCH-03 Spindle NR-H2551 NR-2551 3 Speed Reducer ARG- H2516N ARG-2516N (1/16 Reduction) ø0.897" Grindstone Arbor AGM-03 ø1.18" * MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" AS81805P AS81806P AS81801P AS81802P D=ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) (R=Forward, L=Reverse) Model Outside Diameter Standard Equipment · Accessories AM-H2526R ø1.0" AM-H2526L (ø25.4 mm) AM-2526R ø0.98" Price ø1.18" ø1.0"/ø0.98" ø0.897" AM-2526L (ø25 mm) E4000 AS81807P AIR MOTOR AM-H2526RA (Forward Rotation) 120W 22,000 min-1(rpm) 90˚ Angle Type Air Motor AM-H2526RA AM-2526RA 3.39" 0.53" • Motor Speed ................................... 22,000 min-1(rpm) (71PSI) • Max. Output Power .................................................... 120W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption ................................................... 6.00CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter ................... Air Intake I.D. ø4 mm x O.D. ø6 mm Exhaust Air I.D. ø5.5 mm x O.D. ø8 mm • Weight (w/o hose) ................................................... 8.50 oz. Transmission Clutch Air Motor The connection part "+" is "concave" The connection part "+" is "convex" Air Line Kit AL-M1202. AL-M1203BS2 The installation space is reduced by installing the air intake and •exhaust air hoses at 90˚ angle from the rear end of the motor. not exceed the maximum motor speed recommendation for the spindles. *Do Excess speed will dramatically reduce bearing life. • AM-2526 Torque-Speed Characteristics 7 24 INDEX ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 D=ø1.0" (ø25.4 mm), ø0.98" (ø25 mm) (R=Forward, L=Reverse) CAT. No. Model AS81807P AS81808P AS81803P AS81804P AM-H2526RA Outside Diameter Standard Equipment · Accessories ø0.98" AM-2526LA (ø25 mm) HTS HPS ø1.0" AM-H2526LA (ø25.4 mm) AM-2526RA Price • Hose (K-215) : ø6 mm x 6 ft • Hose (K-256) : ø8 mm x 3 ft • Silencer (K-209) • Wrench (22 x 27) : 1 pc. Xpeed 5 20 6 PARTS 7 71PSI TECHNICAL DATA 56PSI Torque (cN.m) 8 MS AIR LINE KIT TECHNICAL DATA APPLICATION EXAMPLES ø1.18" • Silencer Compressor 5 6 ø1.0" ø0.98" 4 Xpeed PARTS ø0.897" HES510 HTS AIR LINE KIT 3 MA May be connected between the motor and the spindle as required for increased torque. HES810 HPS ø0.897" E3000 - One Piece E3000 - Modular • Hose (K-204) : 6 ft • Silencer (K-208) • Wrench (22 x 27) : 1 pc. 4 HES510 E2530 / E2550 E3000 - 80,000rpm CAT. No. MA ø1.0" ø0.98" Air Motor AM-H2526R AM-2526R Ultra precision, compact, vane-type air motor provides high torque with small volume of air consumption. Withstands long continuous operation without heat generation. Silencer keeps noise to a minimum. ø0.97" ø1.18" Collet Nut K-265 D E3000 - Modular Air Motor 42PSI 16 8 12 APPLICATION EXAMPLES 8 INDEX 4 0 5 10 15 20 25 30 Speed { x 103 min-1(rpm) } 3-p12 * Order by catalog number. 3-p13 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:38 PM ページ 3-p14 SPINDLE O.D. ø1.0", ø0.98"(ø25.4, ø25 mm) COOLANT SPEED REDUCER O.D. ø1.0", ø0.98"(ø25.4, ø25 mm) MA Series can be used in conjunction with water or oil based coolants. Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. *Do not exceed the allowable motor speed for the spindle. CAT. No. 1 AS81820P SPINDLE NR-H2551 (Ceramic Bearing) 50,000 min-1(rpm) CAT. No. AS81826P SPEED REDUCER 1/4 ARG-2504N 1 EmaxEVO EmaxEVO (1.97") Max. Tool Mounting Depth ROTUS 0.67" 3.02" SHEENUS neo SONIC CUTTER 2 D PRESTO II ø0.63" IMPULSE 0.80" 1.36" Recommended Clamping Area • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 8.92 oz. In case of the use of Air Motor AM-2526R Rotating speed at the cutting tool < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel with I.D. of ø5 mm * E2530 / E2550 E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Reduction Ratio 1 4 6,000 min (rpm) ø1.0"/ø0.98" Spindle Designed for increased durability by utilizing ceramic bearings, for •obtaining strong rigidity in both radial direction and thrust directions by utilizing 2 super-precision ceramic bearings on the front side and 2 on the rear side. This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. CAT. No. AS81820P NR-H2551 AS81819P NR-2551 Outside Diameter Standard Equipment · Accessories ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. 24,000 min (rpm) ø1.0"/ø0.98" Speed Reducer CAT. No. Price the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. E2530 / E2550 D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model AS81826P ARG-H2504N AS81822P ARG-2504N Outside Diameter Speed Reduction Ratio ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/4 ø0.897" Price E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E4000 3 CAT. No. AS81828P SPEED REDUCER 1/16 ARG-H2516N MA ø0.897" Allowable motor speed 2.54" MS D Rotating speed at the cutting tool 4 HPS AIR LINE KIT 6 PARTS -1 1,500 min -1 (rpm) (rpm) Rotating speed at the cutting tool -1 1,500 min (rpm) Reduction Ratio 1 16 Allowable motor speed ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES810 24,000 min-1(rpm) HTS *MA Series motor's maximum speed used for reduction ratio examples. HPS Speed Reducer CAT. No. the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping the motor speed unchanged. MS HES510 Xpeed 5 ø1.18" 24,000 min • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 7.23 oz. HES510 HTS ø1.0" ø0.98" In case of the use of Air Motor AM-2526R ø1.18" HES810 E3000 - One Piece E3000 - 80,000rpm ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E2530 / E2550 MA Series motor's maximum speed used for reduction ratio examples. 3 ø0.897" IMPULSE iSpeed3 -1 E4000 MA ROTUS 2 Allowable motor speed D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model (rpm) -1 PRESTO II -1 E2530 / E2550 6,000 min ESPERT (rpm) -1 • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 5.29 oz. Rotating speed at the cutting tool iSpeed3 ø0.897" 24,000 min Allowable motor speed 1.87" D ESPERT D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model AS81828P ARG-H2516N AS81824P ARG-2516N Outside Diameter Speed Reduction Ratio ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/16 Xpeed Price 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 3-p14 * Order by catalog number. 3-p15 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:38 PM ページ 3-p14 SPINDLE O.D. ø1.0", ø0.98"(ø25.4, ø25 mm) COOLANT SPEED REDUCER O.D. ø1.0", ø0.98"(ø25.4, ø25 mm) MA Series can be used in conjunction with water or oil based coolants. Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. *Do not exceed the allowable motor speed for the spindle. CAT. No. 1 AS81820P SPINDLE NR-H2551 (Ceramic Bearing) 50,000 min-1(rpm) CAT. No. AS81826P SPEED REDUCER 1/4 ARG-2504N 1 EmaxEVO EmaxEVO (1.97") Max. Tool Mounting Depth ROTUS 0.67" 3.02" SHEENUS neo SONIC CUTTER 2 D PRESTO II ø0.63" IMPULSE 0.80" 1.36" Recommended Clamping Area • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 8.92 oz. In case of the use of Air Motor AM-2526R Rotating speed at the cutting tool < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ..... For grinding wheel with I.D. of ø5 mm * E2530 / E2550 E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Reduction Ratio 1 4 6,000 min (rpm) ø1.0"/ø0.98" Spindle Designed for increased durability by utilizing ceramic bearings, for •obtaining strong rigidity in both radial direction and thrust directions by utilizing 2 super-precision ceramic bearings on the front side and 2 on the rear side. This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. CAT. No. AS81820P NR-H2551 AS81819P NR-2551 Outside Diameter Standard Equipment · Accessories ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. 24,000 min (rpm) ø1.0"/ø0.98" Speed Reducer CAT. No. Price the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. E2530 / E2550 D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model AS81826P ARG-H2504N AS81822P ARG-2504N Outside Diameter Speed Reduction Ratio ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/4 ø0.897" Price E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E4000 3 CAT. No. AS81828P SPEED REDUCER 1/16 ARG-H2516N MA ø0.897" Allowable motor speed 2.54" MS D Rotating speed at the cutting tool 4 HPS AIR LINE KIT 6 PARTS -1 1,500 min -1 (rpm) (rpm) Rotating speed at the cutting tool -1 1,500 min (rpm) Reduction Ratio 1 16 Allowable motor speed ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES810 24,000 min-1(rpm) HTS *MA Series motor's maximum speed used for reduction ratio examples. HPS Speed Reducer CAT. No. the speed reducer is connected between the motor and the spindle, •itIf reduces the rotating speed and increases the torque while keeping the motor speed unchanged. MS HES510 Xpeed 5 ø1.18" 24,000 min • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 7.23 oz. HES510 HTS ø1.0" ø0.98" In case of the use of Air Motor AM-2526R ø1.18" HES810 E3000 - One Piece E3000 - 80,000rpm ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" SHEENUS neo SONIC CUTTER E2530 / E2550 MA Series motor's maximum speed used for reduction ratio examples. 3 ø0.897" IMPULSE iSpeed3 -1 E4000 MA ROTUS 2 Allowable motor speed D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model (rpm) -1 PRESTO II -1 E2530 / E2550 6,000 min ESPERT (rpm) -1 • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 5.29 oz. Rotating speed at the cutting tool iSpeed3 ø0.897" 24,000 min Allowable motor speed 1.87" D ESPERT D = ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) Model AS81828P ARG-H2516N AS81824P ARG-2516N Outside Diameter Speed Reduction Ratio ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/16 Xpeed Price 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 3-p14 * Order by catalog number. 3-p15 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:38 PM ページ 3-p16 AIR LINE KIT & OIL 1 4502 CAT. No. AIR LINE KIT AL-M1202 EmaxEVO 0.79" ESPERT ROTUS 11.81" 10.24" 0.79" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" IMPULSE PRESTO II ø6 mm 8.66" 6.69" CAT. No. Model 2-ø7mm E2530 / E2550 ø1.0"/ø0.98" E3000 - One Piece E3000 - Modular 4502 AL-M1202 1.18" 4.7 2" ø0.897" IMPULSE 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) iSpeed3 E2530 / E2550 ROTUS SHEENUS neo SONIC CUTTER PF1/4 2 ESPERT PRESTO II R3.5mm ø15mm SHEENUS neo SONIC CUTTER 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 CAT. No. 4503 E3000 - 80,000rpm AIR LINE KIT AL-M1203BS2 3 E4000 The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator MA ø0.897" ø6 mm ø1.0" ø0.98" PF1/4 and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 4-ø9 mm CAT. No. HES510 HTS ø1.0" ø0.98" MS Alarm Buzzer 4 HES810 ø0.897" ø1.18" Solenoid Operated Valve 12.60" 11.02" MS 3 MA 17.72" 19.29" 4503 Model AL-M1203 BS2 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p16 LUBRICATING OIL 6 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 PARTS Product Price 8 Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 7 TECHNICAL DATA Product Price APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p17 3_p0-p17_22.8-25mm_A_1407.qxd 14.8.2 10:38 PM ページ 3-p16 AIR LINE KIT & OIL 1 4502 CAT. No. AIR LINE KIT AL-M1202 EmaxEVO 0.79" ESPERT ROTUS 11.81" 10.24" 0.79" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" IMPULSE PRESTO II ø6 mm 8.66" 6.69" CAT. No. Model 2-ø7mm E2530 / E2550 ø1.0"/ø0.98" E3000 - One Piece E3000 - Modular 4502 AL-M1202 1.18" 4.7 2" ø0.897" IMPULSE 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) iSpeed3 E2530 / E2550 ROTUS SHEENUS neo SONIC CUTTER PF1/4 2 ESPERT PRESTO II R3.5mm ø15mm SHEENUS neo SONIC CUTTER 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece 4-ø7mm E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 CAT. No. 4503 E3000 - 80,000rpm AIR LINE KIT AL-M1203BS2 3 E4000 The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator MA ø0.897" ø6 mm ø1.0" ø0.98" PF1/4 and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 4-ø9 mm CAT. No. HES510 HTS ø1.0" ø0.98" MS Alarm Buzzer 4 HES810 ø0.897" ø1.18" Solenoid Operated Valve 12.60" 11.02" MS 3 MA 17.72" 19.29" 4503 Model AL-M1203 BS2 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p16 LUBRICATING OIL 6 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 PARTS Product Price 8 Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 7 TECHNICAL DATA Product Price APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p17 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:39 PM ページ 3-p18 HIGH-TORQUE AIR MOTOR O.D. ø1.18"(ø30 mm) MODULAR AIR SPINDLE MA SERIES ø1.18"(ø30 mm) Modular Type MA Series consists of 3 kinds of air motors, AM-3020R {19,000 min (rpm), 130W}, AM-3020RA {18,000 min (rpm), • 125W}, enabling a wide variety of operations by the combination of various kinds of spindles. Higher torque is -1 -1 provided by connecting speed reducers. 1 EmaxEVO CAT. No. MA Series ø1.18"(ø30 mm) System Chart ESPERT ROTUS IMPULSE PRESTO II • • MA Series has been designed to operate smoothly at high speed for long continuous cutting and grinding by connecting an air line kit directly between the air compressor and the air motor. (Air Line Kit Refer to 3-p25 in detail) Air supply and exhaust air hoses are supplied with an air motor. Air supply hose is provided with metal fitting to connect to ø6 mm one-touch joint. Air exhaust hose is supplied with silencer. iSpeed3 Air Motor Spindle Spindle NR-3060S Grindstone Flange EGF-19 CAT. No. AS11797 AIR MOTOR AM-3020R AS11798 AIR MOTOR AM-3020L 1 (Forward Rotation) (Reverse Rotation) 130W 19,000 min-1(rpm) EmaxEVO ESPERT ROTUS • Motor Speed .................................. 19,000 min (rpm) (71PSI) • Max. Output Power ................................................... 130W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 6.36CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .................. Air Intake I.D. ø4 mm x O.D. ø6 mm -1 3.43" 0.47" ø30-0.02 -0.03 mm (ø1.18") SHEENUS neo SONIC CUTTER 2 vane type air motor. • Ultra-precision Rigid stainless steel (SUS416) outer housing. • Exhaust Air I.D. ø6 mm x O.D. ø8 mm • Weight (w/o hose) ................................................. 10.51 oz. Compressor Air Line Kit E2530 / E2550 IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" • Silencer E3000 - One Piece Spindle NR-453E NR-403E E3000 - Modular ø1.0"/ø0.98" ø0.897" CAT. No. Collet Nut Collet K-265 CHK-[][] E3000 - 80,000rpm E4000 Arbor for Metal Saw KCH-03 Air Motor AM-3020R Speed Reducer ARG-011E (1 / 4) operation without heat generation. Silencer keeps noise to a minimum. Price Grindstone Arbor AGM-03 * 90º Angle Spindle RAX-271E (1/1.5) RAX-71E (1/6) ø1.18" MS ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 3 * AS11799 AIR MOTOR AM-3020RA CAT. AIR MOTOR AM-3020LA No. AS11800 CAT. No. 90º Angle Air Motor AM-3020RA May be connected between the motor and the spindle as the need of torque. (1/OO ) indicates reduction ratio. 3.48" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Compressor 90º Angle Spindle RA-151E (1/2.67) HES510 ø30-0.02 -0.03 mm (ø1.18") 0.53" Collet CH8-[][] HES810 Arbor for Metal Saw KCH-02 (Forward Rotation) (Reverse Rotation) MA 125W 18,000 min-1(rpm) ø1.0" ø0.98" • Motor Speed .................................. 18,000 min-1(rpm) (71PSI) • Max. Output Power ................................................... 125W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 6.18CFM • Length of Motor Hose ................................................... 6 ft • Hose Diameter .................. Air Intake I.D. ø4 mm x O.D. ø6 mm MS Exhaust Air I.D. ø6 mm x O.D. ø8 mm • Weight (w/o hose) ................................................. 11.96 oz. HES510 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES810 HTS HPS • Silencer 90º Angle Spindle RA-271E (1/1.5) Xpeed ø0.897" ø1.18" Air Line Kit AL-M1202. AL-M1203BS2 HPS E3000 - Modular ø1.18" Speed Reducer ARG-021E (1 / 16) ø1.0" ø0.98" HTS AS11797 AM-3020R AS11798 AM-3020L Standard Equipment · Accessories • Hose (K-215) : ø6 mm x 6 ft • Hose (K-256) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (22 x 27) : 1 pc. E3000 - One Piece E4000 MA 4 Model 90º Angle Spindle RAS-151E (1/2.67) 3 ø0.897" Ultra precision, compact, vane-type air motor provides high torque •with small volume of air consumption. Withstands long continuous ø1.17" ø1.18" ø0.897" Air Motor (R=Forward, L=Reverse) Xpeed Collet CHS-[][] 5 Transmission Clutch 6 PARTS 7 Proper Air Pressure 30 The connection part "+" is "concave" The connection part "+" is "convex" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p18 71PSI 56PSI 25 42PSI CAT. No. installation space is reduced by installing the air intake and •The exhaust air hoses at 90˚ angle from the rear end of the motor. Model AS11799 AM-3020RA AS11800 AM-3020LA Standard Equipment · Accessories • Hose (K-215) : ø6 mm x 6 ft • Hose (K-256) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (22 x 27) : 1 pc. Price AIR LINE KIT 6 PARTS 20 7 15 TECHNICAL DATA 8 10 APPLICATION EXAMPLES 5 not exceed the maximum motor speed recommendation for *Do the spindles. Excess speed will dramatically reduce bearing life. 5 90˚ Angle Type Air Motor (RA=Forward, LA=Reverse) • AM-3020 Torque-Speed Characteristics Torque (cN.m) AIR LINE KIT 0 5 10 15 20 25 INDEX Speed { x 103 min-1(rpm) } * Order by catalog number. 3-p19 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:39 PM ページ 3-p18 HIGH-TORQUE AIR MOTOR O.D. ø1.18"(ø30 mm) MODULAR AIR SPINDLE MA SERIES ø1.18"(ø30 mm) Modular Type MA Series consists of 3 kinds of air motors, AM-3020R {19,000 min (rpm), 130W}, AM-3020RA {18,000 min (rpm), • 125W}, enabling a wide variety of operations by the combination of various kinds of spindles. Higher torque is -1 -1 provided by connecting speed reducers. 1 EmaxEVO CAT. No. MA Series ø1.18"(ø30 mm) System Chart ESPERT ROTUS IMPULSE PRESTO II • • MA Series has been designed to operate smoothly at high speed for long continuous cutting and grinding by connecting an air line kit directly between the air compressor and the air motor. (Air Line Kit Refer to 3-p25 in detail) Air supply and exhaust air hoses are supplied with an air motor. Air supply hose is provided with metal fitting to connect to ø6 mm one-touch joint. Air exhaust hose is supplied with silencer. iSpeed3 Air Motor Spindle Spindle NR-3060S Grindstone Flange EGF-19 CAT. No. AS11797 AIR MOTOR AM-3020R AS11798 AIR MOTOR AM-3020L 1 (Forward Rotation) (Reverse Rotation) 130W 19,000 min-1(rpm) EmaxEVO ESPERT ROTUS • Motor Speed .................................. 19,000 min (rpm) (71PSI) • Max. Output Power ................................................... 130W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 6.36CFM • Length of Motor Hose .................................................... 6 ft • Hose Diameter .................. Air Intake I.D. ø4 mm x O.D. ø6 mm -1 3.43" 0.47" ø30-0.02 -0.03 mm (ø1.18") SHEENUS neo SONIC CUTTER 2 vane type air motor. • Ultra-precision Rigid stainless steel (SUS416) outer housing. • Exhaust Air I.D. ø6 mm x O.D. ø8 mm • Weight (w/o hose) ................................................. 10.51 oz. Compressor Air Line Kit E2530 / E2550 IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" • Silencer E3000 - One Piece Spindle NR-453E NR-403E E3000 - Modular ø1.0"/ø0.98" ø0.897" CAT. No. Collet Nut Collet K-265 CHK-[][] E3000 - 80,000rpm E4000 Arbor for Metal Saw KCH-03 Air Motor AM-3020R Speed Reducer ARG-011E (1 / 4) operation without heat generation. Silencer keeps noise to a minimum. Price Grindstone Arbor AGM-03 * 90º Angle Spindle RAX-271E (1/1.5) RAX-71E (1/6) ø1.18" MS ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 3 * AS11799 AIR MOTOR AM-3020RA CAT. AIR MOTOR AM-3020LA No. AS11800 CAT. No. 90º Angle Air Motor AM-3020RA May be connected between the motor and the spindle as the need of torque. (1/OO ) indicates reduction ratio. 3.48" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Compressor 90º Angle Spindle RA-151E (1/2.67) HES510 ø30-0.02 -0.03 mm (ø1.18") 0.53" Collet CH8-[][] HES810 Arbor for Metal Saw KCH-02 (Forward Rotation) (Reverse Rotation) MA 125W 18,000 min-1(rpm) ø1.0" ø0.98" • Motor Speed .................................. 18,000 min-1(rpm) (71PSI) • Max. Output Power ................................................... 125W • Proper Air Pressure .............................................. 42~71PSI • Air Consumption .................................................. 6.18CFM • Length of Motor Hose ................................................... 6 ft • Hose Diameter .................. Air Intake I.D. ø4 mm x O.D. ø6 mm MS Exhaust Air I.D. ø6 mm x O.D. ø8 mm • Weight (w/o hose) ................................................. 11.96 oz. HES510 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES810 HTS HPS • Silencer 90º Angle Spindle RA-271E (1/1.5) Xpeed ø0.897" ø1.18" Air Line Kit AL-M1202. AL-M1203BS2 HPS E3000 - Modular ø1.18" Speed Reducer ARG-021E (1 / 16) ø1.0" ø0.98" HTS AS11797 AM-3020R AS11798 AM-3020L Standard Equipment · Accessories • Hose (K-215) : ø6 mm x 6 ft • Hose (K-256) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (22 x 27) : 1 pc. E3000 - One Piece E4000 MA 4 Model 90º Angle Spindle RAS-151E (1/2.67) 3 ø0.897" Ultra precision, compact, vane-type air motor provides high torque •with small volume of air consumption. Withstands long continuous ø1.17" ø1.18" ø0.897" Air Motor (R=Forward, L=Reverse) Xpeed Collet CHS-[][] 5 Transmission Clutch 6 PARTS 7 Proper Air Pressure 30 The connection part "+" is "concave" The connection part "+" is "convex" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p18 71PSI 56PSI 25 42PSI CAT. No. installation space is reduced by installing the air intake and •The exhaust air hoses at 90˚ angle from the rear end of the motor. Model AS11799 AM-3020RA AS11800 AM-3020LA Standard Equipment · Accessories • Hose (K-215) : ø6 mm x 6 ft • Hose (K-256) : ø8 mm x 3 ft • Silencer (K-208) • Wrench (22 x 27) : 1 pc. Price AIR LINE KIT 6 PARTS 20 7 15 TECHNICAL DATA 8 10 APPLICATION EXAMPLES 5 not exceed the maximum motor speed recommendation for *Do the spindles. Excess speed will dramatically reduce bearing life. 5 90˚ Angle Type Air Motor (RA=Forward, LA=Reverse) • AM-3020 Torque-Speed Characteristics Torque (cN.m) AIR LINE KIT 0 5 10 15 20 25 INDEX Speed { x 103 min-1(rpm) } * Order by catalog number. 3-p19 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:39 PM ページ 3-p20 SPINDLE O.D. ø1.18"(ø30 mm) MA Series can be used in conjunction with water or oil based coolants. COOLANT 1583 SPINDLE NR-3060S (Ceramic Bearing) ESPERT ROTUS (1.97") Max. Tool Mounting Depth (0.69") 2.12" IMPULSE 0 ø30-0.01 mm (ø1.18") SHEENUS neo SONIC CUTTER 2 ø0.63" PRESTO II iSpeed3 0.79" 1.33" Recommended Clamping Area E2530 / E2550 60,000 min-1(rpm) *Do not exceed the allowable motor speed for the spindle. CAT. No. • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 9.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) .......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm ASE1514 SPINDLE NR-403E ø0.63" EmaxEVO *Do not exceed the allowable motor speed for the spindle. CAT. No. (1.97") Max. Tool Mounting Depth (0.69") 3.94" 0 ø30-0.01 mm (ø1.18") 1 COOLANT 0.79" 2.17" Recommended Clamping Area ø1.0"/ø0.98" 40,000 min-1(rpm) • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" Spindle E3000 - One Piece CAT. No. Model E3000 - Modular ø1.0"/ø0.98" ø0.897" ESPERT ø1.0"/ø0.98" E2530 / E2550 ø1.18" 1 EmaxEVO spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. 1583 NR-3060S Price Standard Equipment · Accessories CAT. No. • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. E3000 - 80,000rpm E3000 - One Piece Spindle Model ASE1514 NR-403E Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. Price E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 E4000 3 3 MA ø0.897" ø1.0" ø0.98" MA CAT. No. ASE1566 SPINDLE NR-453E (Ceramic Bearing) 50,000 min (rpm) -1 ø1.18" (1.97") Max. Tool Mounting Depth (0.69") 3.94" 0 ø30-0.01 mm (ø1.18") HES810 ø0.63" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HTS HPS 0.79" 2.17" • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm Recommended Clamping Area Xpeed 5 PARTS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 Spindle CAT. No. AIR LINE KIT 6 ø1.0" ø0.98" ø1.18" MS 4 ø0.897" spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. Model ASE1566 NR-453E Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. Price AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 3-p20 * Order by catalog number. 3-p21 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:39 PM ページ 3-p20 SPINDLE O.D. ø1.18"(ø30 mm) MA Series can be used in conjunction with water or oil based coolants. COOLANT 1583 SPINDLE NR-3060S (Ceramic Bearing) ESPERT ROTUS (1.97") Max. Tool Mounting Depth (0.69") 2.12" IMPULSE 0 ø30-0.01 mm (ø1.18") SHEENUS neo SONIC CUTTER 2 ø0.63" PRESTO II iSpeed3 0.79" 1.33" Recommended Clamping Area E2530 / E2550 60,000 min-1(rpm) *Do not exceed the allowable motor speed for the spindle. CAT. No. • Allowable Motor Speed ............................... 60,000 min-1(rpm) • Spindle Accuracy ............................................... Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight .................................................................. 9.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) .......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm ASE1514 SPINDLE NR-403E ø0.63" EmaxEVO *Do not exceed the allowable motor speed for the spindle. CAT. No. (1.97") Max. Tool Mounting Depth (0.69") 3.94" 0 ø30-0.01 mm (ø1.18") 1 COOLANT 0.79" 2.17" Recommended Clamping Area ø1.0"/ø0.98" 40,000 min-1(rpm) • Allowable Motor Speed ............................... 40,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" Spindle E3000 - One Piece CAT. No. Model E3000 - Modular ø1.0"/ø0.98" ø0.897" ESPERT ø1.0"/ø0.98" E2530 / E2550 ø1.18" 1 EmaxEVO spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. 1583 NR-3060S Price Standard Equipment · Accessories CAT. No. • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • This spindle can be used for small-diameter milling, drilling, slitting, chamfering, grinding, etc. E3000 - 80,000rpm E3000 - One Piece Spindle Model ASE1514 NR-403E Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. Price E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 E4000 3 3 MA ø0.897" ø1.0" ø0.98" MA CAT. No. ASE1566 SPINDLE NR-453E (Ceramic Bearing) 50,000 min (rpm) -1 ø1.18" (1.97") Max. Tool Mounting Depth (0.69") 3.94" 0 ø30-0.01 mm (ø1.18") HES810 ø0.63" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HTS HPS 0.79" 2.17" • Allowable Motor Speed ............................... 50,000 min-1(rpm) • Spindle Accuracy .............................................. Within 1 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 15.52 oz. < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm • Grindstone Flange (EGF-19) ..... ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm Recommended Clamping Area Xpeed 5 PARTS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 Spindle CAT. No. AIR LINE KIT 6 ø1.0" ø0.98" ø1.18" MS 4 ø0.897" spindle can be used for small-diameter milling, drilling, •This slitting, chamfering, grinding, etc. Model ASE1566 NR-453E Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. Price AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 3-p20 * Order by catalog number. 3-p21 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:40 PM ページ 3-p22 SPINDLE O.D. ø1.18"(ø30 mm) Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Caution : COOLANT ASE1559 90°ANGLE SPINDLE RAS-151E CAT. No. PRESTO II SHEENUS neo SONIC CUTTER 0.80" 2 1.10" 2.06" Maximum rotating speed at the cutting tool 7,490 min-1(rpm) E2530 / E2550 Reduction Ratio 1 2.67 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm 3.41" (1.48") ø0.90" EmaxEVO ESPERT Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) Recommended Clamping Area Reduction Ratio ø0.35" 1 2.67 • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight ................................................................ 13.58 oz. < Optional > • Collet (CH8-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) ø1.0"/ø0.98" ø0.897" Type Spindle can use up to a ø1/4"(ø6.35 mm) collet and •90˚Angle is suitable for installation where space restrictions exist. iSpeed3 ø0.897" 7,490 min-1(rpm) CAT. No. E3000 - One Piece Model Standard Equipment · Accessories Price E3000 - Modular ø1.18" 90˚ Angle Spindle CAT. No. E3000 - 80,000rpm 2 ø1.0"/ø0.98" 20,000 min (rpm) 0 -0.01 SHEENUS neo SONIC CUTTER E2530 / E2550 -1 90˚ Angle Spindle ø30 mm (ø1.18") IMPULSE E2530 / E2550 Maximum allowable motor speed for the spindle Maximum rotating speed at the cutting tool ROTUS PRESTO II 20,000 min-1(rpm) ø1.18" 3 -1 Maximum allowable motor speed for the spindle E3000 - Modular E4000 20,000 min • Spindle Accuracy ............................................... Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 11.46 oz. Recommended Clamping Area iSpeed3 Maximum allowable motor speed for the spindle 0 ø30-0.01 mm (ø1.18") 0.55" 0 ø23-0.01 mm (ø0.19") IMPULSE (1.97") Max. Tool Mounting Depth 0.67" 2.95" 1.58" ROTUS 0.79" ø0.63" ESPERT 1 ASE1505 90°ANGLE SPINDLE RA-151E 0.32" CAT. No. COOLANT (1.26" ) Max. Tool Mounting Depth 1 EmaxEVO Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Model ASE1559 RAS-151E Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • This spindle is capable of working on corners difficult to work or unfit for working with straight type, drilling on side face and, slitting of aluminum, brass, etc. with the use of ø1.18"(ø30 mm) Metal Saw. ASE1505 RA-151E • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (22 x 27) : 1 pc. each ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" 3.23" ø1.18" HES510 6 1.22" 2.32" 5 AIR LINE KIT (0.69") Xpeed Recommended Clamping Area (1.96") Max. Tool Mounting Depth HPS PARTS 7 TECHNICAL DATA 8 0.79" 1.38" HES810 HTS Maximum rotating speed at the cutting tool RAX-271E RAX-71E ø0.63" Grease Point 0.35" Reduction Ratio 1/1.5 1/6 (RAX-271E) (RAX-71E) Maximum allowable motor speed for the spindle 20,000 min-1(rpm) Maximum rotating speed at the cutting tool 13,300 min-1(rpm) (RAX-271E) 3,300 min-1(rpm) (RAX-71E) SERIES motor's maximum speed used *MA for reduction ratio examples. INDEX spindle is capable of working on corners difficult to work with •This straight type, drilling on side faces and milling of grooves. 3-p22 (rpm) -1 (rpm) -1 • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................... 1 lb. 4.46 oz. (RAX-271E) 1 lb. 0.58 oz. (RAX-71E) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm 90˚ Angle Spindle CAT. No. Model ASE1579 RAX-271E ASE1576 RAX-71E APPLICATION EXAMPLES 20,000 min 5,000 min (rpm) Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. ø0.69" 1.77" 1.29" Recommended Clamping Area 0 ø30-0.01 mm (ø1.18") 4 30,000 min 2.90" 0.59" Maximum allowable motor speed for the spindle -1 ASE1506 90°ANGLE SPINDLE RA-271E (0.26") 1.12" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. (1.22") Max. Tool Mounting Depth MS ASE1579 90° ANGLE SPINDLE RAX-271E (Speed Reduction Ratio 1/1.5) CAT. 90° ANGLE SPINDLE RAX-71E (Speed Reduction Ratio 1/6) No. ASE1576 CAT. No. 0 ø30-0.01 mm (ø1.18") ø1.18" Reduction Ratio ø0.31" 1 1.5 Maximum rotating speed at the cutting tool ø1.18" MS Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) .................................. ø1/8" • Weight .................................................................. 8.47 oz. < Optional > • Collet (CHS-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed Maximum allowable motor speed for the spindle 5 20,000 min-1(rpm) AIR LINE KIT -1 13,330 min (rpm) 90˚ Angle Spindle CAT. No. spindle can be used for working on corners difficult to work or •This unfit for working with straight type, drilling on side face, etc. Model ASE1506 RA-271E Standard Equipment · Accessories • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (22 x 27) : 1 pc. each Price 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p23 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:40 PM ページ 3-p22 SPINDLE O.D. ø1.18"(ø30 mm) Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Caution : COOLANT ASE1559 90°ANGLE SPINDLE RAS-151E CAT. No. PRESTO II SHEENUS neo SONIC CUTTER 0.80" 2 1.10" 2.06" Maximum rotating speed at the cutting tool 7,490 min-1(rpm) E2530 / E2550 Reduction Ratio 1 2.67 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm 3.41" (1.48") ø0.90" EmaxEVO ESPERT Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 7,490 min -1 (rpm) (rpm) Recommended Clamping Area Reduction Ratio ø0.35" 1 2.67 • Standard Size Collet (CH8-3.175) .................................. ø1/8" • Weight ................................................................ 13.58 oz. < Optional > • Collet (CH8-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p5 for details) • Metal Saw Arbor (KCH-02) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) ø1.0"/ø0.98" ø0.897" Type Spindle can use up to a ø1/4"(ø6.35 mm) collet and •90˚Angle is suitable for installation where space restrictions exist. iSpeed3 ø0.897" 7,490 min-1(rpm) CAT. No. E3000 - One Piece Model Standard Equipment · Accessories Price E3000 - Modular ø1.18" 90˚ Angle Spindle CAT. No. E3000 - 80,000rpm 2 ø1.0"/ø0.98" 20,000 min (rpm) 0 -0.01 SHEENUS neo SONIC CUTTER E2530 / E2550 -1 90˚ Angle Spindle ø30 mm (ø1.18") IMPULSE E2530 / E2550 Maximum allowable motor speed for the spindle Maximum rotating speed at the cutting tool ROTUS PRESTO II 20,000 min-1(rpm) ø1.18" 3 -1 Maximum allowable motor speed for the spindle E3000 - Modular E4000 20,000 min • Spindle Accuracy ............................................... Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ................................................................ 11.46 oz. Recommended Clamping Area iSpeed3 Maximum allowable motor speed for the spindle 0 ø30-0.01 mm (ø1.18") 0.55" 0 ø23-0.01 mm (ø0.19") IMPULSE (1.97") Max. Tool Mounting Depth 0.67" 2.95" 1.58" ROTUS 0.79" ø0.63" ESPERT 1 ASE1505 90°ANGLE SPINDLE RA-151E 0.32" CAT. No. COOLANT (1.26" ) Max. Tool Mounting Depth 1 EmaxEVO Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. Model ASE1559 RAS-151E Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. • This spindle is capable of working on corners difficult to work or unfit for working with straight type, drilling on side face and, slitting of aluminum, brass, etc. with the use of ø1.18"(ø30 mm) Metal Saw. ASE1505 RA-151E • Collet ø1/8" (CH8-3.175) : 1 pc. • Wrench (7 x 5.5), (8 x 5), (22 x 27) : 1 pc. each ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" 3.23" ø1.18" HES510 6 1.22" 2.32" 5 AIR LINE KIT (0.69") Xpeed Recommended Clamping Area (1.96") Max. Tool Mounting Depth HPS PARTS 7 TECHNICAL DATA 8 0.79" 1.38" HES810 HTS Maximum rotating speed at the cutting tool RAX-271E RAX-71E ø0.63" Grease Point 0.35" Reduction Ratio 1/1.5 1/6 (RAX-271E) (RAX-71E) Maximum allowable motor speed for the spindle 20,000 min-1(rpm) Maximum rotating speed at the cutting tool 13,300 min-1(rpm) (RAX-271E) 3,300 min-1(rpm) (RAX-71E) SERIES motor's maximum speed used *MA for reduction ratio examples. INDEX spindle is capable of working on corners difficult to work with •This straight type, drilling on side faces and milling of grooves. 3-p22 (rpm) -1 (rpm) -1 • Spindle Accuracy .............................................. Within 2 µm • Standard Size Collet (CHK-3.175) .................................. ø1/8" • Weight ........................................... 1 lb. 4.46 oz. (RAX-271E) 1 lb. 0.58 oz. (RAX-71E) < Optional > • Collet (CHK-[][]) ...................................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) ........................................ For Collet (CHK) • Metal Saw Arbor (KCH-03) ......... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) .... For grinding wheel with I.D. of ø5 mm 90˚ Angle Spindle CAT. No. Model ASE1579 RAX-271E ASE1576 RAX-71E APPLICATION EXAMPLES 20,000 min 5,000 min (rpm) Standard Equipment · Accessories Price • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs., (22 x 27) : 1 pc. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. ø0.69" 1.77" 1.29" Recommended Clamping Area 0 ø30-0.01 mm (ø1.18") 4 30,000 min 2.90" 0.59" Maximum allowable motor speed for the spindle -1 ASE1506 90°ANGLE SPINDLE RA-271E (0.26") 1.12" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. (1.22") Max. Tool Mounting Depth MS ASE1579 90° ANGLE SPINDLE RAX-271E (Speed Reduction Ratio 1/1.5) CAT. 90° ANGLE SPINDLE RAX-71E (Speed Reduction Ratio 1/6) No. ASE1576 CAT. No. 0 ø30-0.01 mm (ø1.18") ø1.18" Reduction Ratio ø0.31" 1 1.5 Maximum rotating speed at the cutting tool ø1.18" MS Maximum allowable motor speed for the spindle 20,000 min -1 Maximum rotating speed at the cutting tool 13,330 min -1 (rpm) (rpm) • Standard Size Collet (CHS-3.175) .................................. ø1/8" • Weight .................................................................. 8.47 oz. < Optional > • Collet (CHS-[][]) ..................................... ø0.8 mm~ø3.175 mm (See Page 6-p4 for details) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed Maximum allowable motor speed for the spindle 5 20,000 min-1(rpm) AIR LINE KIT -1 13,330 min (rpm) 90˚ Angle Spindle CAT. No. spindle can be used for working on corners difficult to work or •This unfit for working with straight type, drilling on side face, etc. Model ASE1506 RA-271E Standard Equipment · Accessories • Collet ø1/8" (CHS-3.175) : 1 pc. • Wrench (7 x 5.1), (8 x 5), (22 x 27) : 1 pc. each Price 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p23 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:40 PM ページ 3-p24 SPEED REDUCER O.D. ø1.18"(ø30 mm) Caution : CAT. No. Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. ASE1507 SPEED REDUCER 1/4 ARG-011E IMPULSE 0 ø30-0.01 mm (ø1.18") Rotating speed at the cutting tool SHEENUS neo SONIC CUTTER 0.31" iSpeed3 Rotating speed at the cutting tool ø1.0"/ø0.98" 4,750 min-1(rpm) E2530 / E2550 ø0.897" Reduction Ratio 1 4 Allowable motor speed 19,000 min-1(rpm) E3000 - Modular E3000 - 80,000rpm Model Speed Reduction Ratio the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. 11.81" 10.24" 0.79" R3.5mm ø15mm impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" CAT. No. ASE1507 ARG-011E 1.18" 4502 AL-M1202 4503 PF1/4 19,000 min -1 1,187 min -1 (rpm) (rpm) 0.31" Rotating speed at the cutting tool 1,187 min-1(rpm) Reduction Ratio 1 16 Allowable motor speed 19,000 min-1(rpm) PARTS 7 TECHNICAL DATA and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. CAT. No. Model 4503 AL-M1203 BS2 Speed Reducer 1/16 Model ASE1508 ARG-021E Speed Reduction Ratio Price 17.72" 19.29" the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. ø1.0" ø0.98" ø1.18" 4 HES510 HES810 HTS HPS Speed Reduction Ratio 1/16 Xpeed To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. 5 AIR LINE KIT LUBRICATING OIL 6 PARTS Lubricating Oil (4 oz.) CAT. No. AA10478 Model Product Price 7 TECHNICAL DATA K-211 8 Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 INDEX 3-p24 ø0.897" Price 8 APPLICATION EXAMPLES MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 4-ø9 mm 3 MS * MA Series motor's maximum speed used for reduction ratio examples. AIR LINE KIT 6 E4000 Alarm Buzzer • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................ 11.46 oz. CAT. No. HTS 5 ø0.897" E3000 - One Piece Solenoid Operated Valve 12.60" 11.02" 0 ø30-0.01 mm (ø1.18") Rotating speed at the cutting tool Grease Point HES810 Xpeed ø1.0"/ø0.98" E2530 / E2550 AIR LINE KIT AL-M1203BS2 HES510 HPS E2530 / E2550 E3000 - 80,000rpm ø6 mm Allowable motor speed 2.76" iSpeed3 ø1.0"/ø0.98" ø0.897" In case of the use of Air Motor AM-3020R MS PRESTO II E3000 - Modular ASE1508 SPEED REDUCER 1/16 ARG-021E ø1.18" 4 Price 4-ø7mm MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator CAT. No. IMPULSE ø1.18" CAT. No. 3 ø1.0" ø0.98" Model 2-ø7mm To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. ROTUS 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) Speed Reduction Ratio 1/4 ESPERT SHEENUS neo SONIC CUTTER ø6 mm PF1/4 Price E4000 ø0.897" EmaxEVO The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and (rpm) *MA Series motor's maximum speed used for reduction ratio examples. E3000 - One Piece ø1.0"/ø0.98" ø0.897" -1 Speed Reducer 1/4 CAT. No. E2530 / E2550 4,750 min (rpm) • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 8.54 oz. Grease Point 2 -1 8.66" 6.69" PRESTO II 19,000 min 0.79" Allowable motor speed 2.09" ROTUS 1 AIR LINE KIT AL-M1202 In case of the use of Air Motor AM-3020R ESPERT ø1.18" 4502 CAT. No. 4.7 2" 1 EmaxEVO AIR LINE KIT & OIL APPLICATION EXAMPLES Product Price INDEX * Order by catalog number. 3-p25 3_p18-p25_30mm_A_1407.qxd 14.8.2 10:40 PM ページ 3-p24 SPEED REDUCER O.D. ø1.18"(ø30 mm) Caution : CAT. No. Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. ASE1507 SPEED REDUCER 1/4 ARG-011E IMPULSE 0 ø30-0.01 mm (ø1.18") Rotating speed at the cutting tool SHEENUS neo SONIC CUTTER 0.31" iSpeed3 Rotating speed at the cutting tool ø1.0"/ø0.98" 4,750 min-1(rpm) E2530 / E2550 ø0.897" Reduction Ratio 1 4 Allowable motor speed 19,000 min-1(rpm) E3000 - Modular E3000 - 80,000rpm Model Speed Reduction Ratio the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. 11.81" 10.24" 0.79" R3.5mm ø15mm impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" CAT. No. ASE1507 ARG-011E 1.18" 4502 AL-M1202 4503 PF1/4 19,000 min -1 1,187 min -1 (rpm) (rpm) 0.31" Rotating speed at the cutting tool 1,187 min-1(rpm) Reduction Ratio 1 16 Allowable motor speed 19,000 min-1(rpm) PARTS 7 TECHNICAL DATA and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. CAT. No. Model 4503 AL-M1203 BS2 Speed Reducer 1/16 Model ASE1508 ARG-021E Speed Reduction Ratio Price 17.72" 19.29" the speed reducer is connected between the motor and the spindle, •Ifit reduces the rotating speed and increases the torque while keeping the motor speed unchanged. Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. ø1.0" ø0.98" ø1.18" 4 HES510 HES810 HTS HPS Speed Reduction Ratio 1/16 Xpeed To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. 5 AIR LINE KIT LUBRICATING OIL 6 PARTS Lubricating Oil (4 oz.) CAT. No. AA10478 Model Product Price 7 TECHNICAL DATA K-211 8 Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 INDEX 3-p24 ø0.897" Price 8 APPLICATION EXAMPLES MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 4-ø9 mm 3 MS * MA Series motor's maximum speed used for reduction ratio examples. AIR LINE KIT 6 E4000 Alarm Buzzer • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................ 11.46 oz. CAT. No. HTS 5 ø0.897" E3000 - One Piece Solenoid Operated Valve 12.60" 11.02" 0 ø30-0.01 mm (ø1.18") Rotating speed at the cutting tool Grease Point HES810 Xpeed ø1.0"/ø0.98" E2530 / E2550 AIR LINE KIT AL-M1203BS2 HES510 HPS E2530 / E2550 E3000 - 80,000rpm ø6 mm Allowable motor speed 2.76" iSpeed3 ø1.0"/ø0.98" ø0.897" In case of the use of Air Motor AM-3020R MS PRESTO II E3000 - Modular ASE1508 SPEED REDUCER 1/16 ARG-021E ø1.18" 4 Price 4-ø7mm MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator CAT. No. IMPULSE ø1.18" CAT. No. 3 ø1.0" ø0.98" Model 2-ø7mm To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. ROTUS 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) Speed Reduction Ratio 1/4 ESPERT SHEENUS neo SONIC CUTTER ø6 mm PF1/4 Price E4000 ø0.897" EmaxEVO The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and (rpm) *MA Series motor's maximum speed used for reduction ratio examples. E3000 - One Piece ø1.0"/ø0.98" ø0.897" -1 Speed Reducer 1/4 CAT. No. E2530 / E2550 4,750 min (rpm) • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 8.54 oz. Grease Point 2 -1 8.66" 6.69" PRESTO II 19,000 min 0.79" Allowable motor speed 2.09" ROTUS 1 AIR LINE KIT AL-M1202 In case of the use of Air Motor AM-3020R ESPERT ø1.18" 4502 CAT. No. 4.7 2" 1 EmaxEVO AIR LINE KIT & OIL APPLICATION EXAMPLES Product Price INDEX * Order by catalog number. 3-p25 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p26 ONE PIECE AIR SPINDLE / MOTOR MS Air System Series 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ROTUS One Piece Type Spindle IMPULSE PRESTO II Shorter overall length suitable for CNC lathes and special purpose machines. Hardened and precision ground for high rigidity & excellent durability. SHEENUS neo SONIC CUTTER Spindle Motor External one-piece housing includes both the motor & spindle. 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 O.D. ø0.91" (ø23mm) 3 (One Piece Type) E3000 - 80,000rpm E4000 O.D. ø0.87" (ø22mm) MA ø0.897" (One Piece Type) 3 MA ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p26 PARTS O.D. ø0.75" (ø19.05mm) (One Piece Type) 7 TECHNICAL DATA O.D. ø0.79" (ø20mm) (One Piece Type) O.D. ø1.0" (ø25.4mm) (One Piece Type) 8 APPLICATION EXAMPLES INDEX 3-p27 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p26 ONE PIECE AIR SPINDLE / MOTOR MS Air System Series 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ROTUS One Piece Type Spindle IMPULSE PRESTO II Shorter overall length suitable for CNC lathes and special purpose machines. Hardened and precision ground for high rigidity & excellent durability. SHEENUS neo SONIC CUTTER Spindle Motor External one-piece housing includes both the motor & spindle. 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 O.D. ø0.91" (ø23mm) 3 (One Piece Type) E3000 - 80,000rpm E4000 O.D. ø0.87" (ø22mm) MA ø0.897" (One Piece Type) 3 MA ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 3-p26 PARTS O.D. ø0.75" (ø19.05mm) (One Piece Type) 7 TECHNICAL DATA O.D. ø0.79" (ø20mm) (One Piece Type) O.D. ø1.0" (ø25.4mm) (One Piece Type) 8 APPLICATION EXAMPLES INDEX 3-p27 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p28 SYSTEM CHART COOLANT 1 ULTRA-PRECISION CONFIGURATION & ø1.18"(ø30 CHARACTERISTICS mm) SPINDLE MS Series can be used in conjunction with water or oil based coolants. MS Series System Chart 1 Configuration & Characteristics EmaxEVO • ESPERT ROTUS Model Code Example Air Motor Vane Rotor IMPULSE Air Motor Spindle MSS-25 Series Straight Type PRESTO II Cylinder SHEENUS neo SONIC CUTTER Air Intake Port Collet Nut K-265 Exhaust Air Port Collet CHK-[][] 2 MSS [1] Air Motor Spindle MSS-25 Series Angle Type Arbor for Metal Saw KCH-03 19 08 R [2] [3] on the mounting and plumbing restrictions in your installation. PRESTO II [4] • • 90˚ Angle Type [1] SERIES CODE [2] OUTSIDE DIAMETER [3] SPEED [4] R=FORWARD (Right) [5] CODE FOR 90˚ ANGLE TYPE iSpeed3 E2530 / E2550 • Straight Type [1] SERIES CODE [2] OUTSIDE DIAMETER [3] SPEED [4] R=FORWARD (Right) Housing Material •Outer The outer housing is (SUS416) precision ground to +0/-0.01mm. •Configuration Either straight or 90˚ air connection types are available depending EmaxEVO MSS [1] 19 08 R A [2] [5] [3] [4] Very high spindle accuracy makes ultra-precision machining possible. • Spindle Accuracy ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece Grindstone Arbor AGM-03 E3000 - Modular •The design of NAKANISHI's air motors gives Air Motor Spindle MSST-23 Series Straight Type E3000 - 80,000rpm E4000 Rotor 3 Cylinder MA ø0.897" ø1.0" ø0.98" Air Intake Port Air Motor Spindle MSS-22 Series Straight Type ø1.18" Compressor MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Collet Nut CHN-A Collet CHA-[][] HTS Air Motor Spindle MSS-20 Series Straight Type HPS Xpeed Grindstone Arbor AGM-01A Exhaust Air Port The rotor of the air motor rotates off center in the cylinder. The vanes are pushed by compressed air and this rotates the rotor. This small air motor produces high torque making it suitable for small diameter drilling, milling, slitting and grinding. E3000 - 80,000rpm E4000 3 MS Series Set-Up Chart •(Air line kit is required for operation) Reduction System •ASpeed planetary gear speed reduction system is incorporated in some ø0.897" The MS Series spindles are specifically designed for long term continuous use in high speed machining applications such as small diameter drilling, milling, slitting and grinding applications. It runs by connecting the air line kit to Compressor [1] directly. Stably adjusted air pressure is supplied through Air Regulator [2] that also controls the speed of spindle. Air is purified by Air Filter [3] and Lubricator [4] supplies lubricant automatically to the air spindle while in operation. Switch [5] controls the operation of air spindle ON and OFF. of the MS Series motor/spindles. The speed reduction ratio is either 1/4 or 1/16. This maintains a high motor speed while giving very high torque, low speed rotation at the spindle. By carefully selecting only the highest grade materials for the planetary gear reducers we can ensure high load capacity. 1/4 · 1/16 : Planetary Gear System Air Motor Spindle MSS-20 Series Angle Type MA INDEX MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HTS [5] HPS Xpeed Air Motor Spindle [3] [1] [4] 5 AIR LINE KIT Air Line Kit Refer to 3-p34 6 PARTS Air Motor Spindle MSS-19 Series Straight Type • 7 Installation of 90˚ Angle Type MSS · MSST · MSSH series angle (RA) type drive air and exhaust air pipes can • be removed enabling the motor spindle installed through the front of a holder 8 APPLICATION EXAMPLES ø1.18" HES810 PARTS 7 ø1.0" ø0.98" HES510 [2] 6 TECHNICAL DATA ø1.0"/ø0.98" E2530 / E2550 ø1.18" Silencer •By utilizing a silencer on the exhaust air tubing the noise Arbor for Metal Saw KCH-01A 5 AIR LINE KIT Air Line Kit AL-M1202.AL-M1203BS2 E2530 / E2550 E3000 - Modular generated by the motor or turbine is greatly reduced. Air Motor Spindle MSS-22 Series Angle Type 2 ø1.0"/ø0.98" ø0.897" Vane Air Motor Spindle MSST-23 Series Angle Type SHEENUS neo SONIC CUTTER ø0.897" • Air Motor ø1.0"/ø0.98" ø0.897" IMPULSE E3000 - One Piece the highest output power in this small spindle class. ø1.18" ROTUS iSpeed3 Spindle accuracy is the spindle runout as measured at the tip of taper on the ID of the spindle. ø0.897" ESPERT with backside restriction as shown in the illustration. Air Motor Spindle MSS-19 Series Angle Type Installation [1] Remove Intake and Exhaust Air Pipes from motor spindle. [2] Insert the straight spindle from the front side of holder and fix it. [3] Mount the intake and exhaust air pipes to the spindle fixed on the holder and attach a hose to the quick disconnect joint. • Urethane hose of 6 x 4 for intake air and 8 x 5 for exhaust air can be installed. Quick Disconnect Joint Intake Air ø6 mm Intake Air Pipe O Ring Set Screw for Intake Air Pipe M5.5X0.5 Quick Disconnect Joint Exhaust Air ø8 mm Exhaust Air Pipe TECHNICAL DATA 8 APPLICATION EXAMPLES O Ring Set Screw for Exhaust Air Pipe M6X0.5 INDEX *The motor speed of 90˚ Angle air connection type motor / spindles are 10% less than that of the straight type. 3-p28 3-p29 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p28 SYSTEM CHART COOLANT 1 ULTRA-PRECISION CONFIGURATION & ø1.18"(ø30 CHARACTERISTICS mm) SPINDLE MS Series can be used in conjunction with water or oil based coolants. MS Series System Chart 1 Configuration & Characteristics EmaxEVO • ESPERT ROTUS Model Code Example Air Motor Vane Rotor IMPULSE Air Motor Spindle MSS-25 Series Straight Type PRESTO II Cylinder SHEENUS neo SONIC CUTTER Air Intake Port Collet Nut K-265 Exhaust Air Port Collet CHK-[][] 2 MSS [1] Air Motor Spindle MSS-25 Series Angle Type Arbor for Metal Saw KCH-03 19 08 R [2] [3] on the mounting and plumbing restrictions in your installation. PRESTO II [4] • • 90˚ Angle Type [1] SERIES CODE [2] OUTSIDE DIAMETER [3] SPEED [4] R=FORWARD (Right) [5] CODE FOR 90˚ ANGLE TYPE iSpeed3 E2530 / E2550 • Straight Type [1] SERIES CODE [2] OUTSIDE DIAMETER [3] SPEED [4] R=FORWARD (Right) Housing Material •Outer The outer housing is (SUS416) precision ground to +0/-0.01mm. •Configuration Either straight or 90˚ air connection types are available depending EmaxEVO MSS [1] 19 08 R A [2] [5] [3] [4] Very high spindle accuracy makes ultra-precision machining possible. • Spindle Accuracy ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece Grindstone Arbor AGM-03 E3000 - Modular •The design of NAKANISHI's air motors gives Air Motor Spindle MSST-23 Series Straight Type E3000 - 80,000rpm E4000 Rotor 3 Cylinder MA ø0.897" ø1.0" ø0.98" Air Intake Port Air Motor Spindle MSS-22 Series Straight Type ø1.18" Compressor MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Collet Nut CHN-A Collet CHA-[][] HTS Air Motor Spindle MSS-20 Series Straight Type HPS Xpeed Grindstone Arbor AGM-01A Exhaust Air Port The rotor of the air motor rotates off center in the cylinder. The vanes are pushed by compressed air and this rotates the rotor. This small air motor produces high torque making it suitable for small diameter drilling, milling, slitting and grinding. E3000 - 80,000rpm E4000 3 MS Series Set-Up Chart •(Air line kit is required for operation) Reduction System •ASpeed planetary gear speed reduction system is incorporated in some ø0.897" The MS Series spindles are specifically designed for long term continuous use in high speed machining applications such as small diameter drilling, milling, slitting and grinding applications. It runs by connecting the air line kit to Compressor [1] directly. Stably adjusted air pressure is supplied through Air Regulator [2] that also controls the speed of spindle. Air is purified by Air Filter [3] and Lubricator [4] supplies lubricant automatically to the air spindle while in operation. Switch [5] controls the operation of air spindle ON and OFF. of the MS Series motor/spindles. The speed reduction ratio is either 1/4 or 1/16. This maintains a high motor speed while giving very high torque, low speed rotation at the spindle. By carefully selecting only the highest grade materials for the planetary gear reducers we can ensure high load capacity. 1/4 · 1/16 : Planetary Gear System Air Motor Spindle MSS-20 Series Angle Type MA INDEX MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HTS [5] HPS Xpeed Air Motor Spindle [3] [1] [4] 5 AIR LINE KIT Air Line Kit Refer to 3-p34 6 PARTS Air Motor Spindle MSS-19 Series Straight Type • 7 Installation of 90˚ Angle Type MSS · MSST · MSSH series angle (RA) type drive air and exhaust air pipes can • be removed enabling the motor spindle installed through the front of a holder 8 APPLICATION EXAMPLES ø1.18" HES810 PARTS 7 ø1.0" ø0.98" HES510 [2] 6 TECHNICAL DATA ø1.0"/ø0.98" E2530 / E2550 ø1.18" Silencer •By utilizing a silencer on the exhaust air tubing the noise Arbor for Metal Saw KCH-01A 5 AIR LINE KIT Air Line Kit AL-M1202.AL-M1203BS2 E2530 / E2550 E3000 - Modular generated by the motor or turbine is greatly reduced. Air Motor Spindle MSS-22 Series Angle Type 2 ø1.0"/ø0.98" ø0.897" Vane Air Motor Spindle MSST-23 Series Angle Type SHEENUS neo SONIC CUTTER ø0.897" • Air Motor ø1.0"/ø0.98" ø0.897" IMPULSE E3000 - One Piece the highest output power in this small spindle class. ø1.18" ROTUS iSpeed3 Spindle accuracy is the spindle runout as measured at the tip of taper on the ID of the spindle. ø0.897" ESPERT with backside restriction as shown in the illustration. Air Motor Spindle MSS-19 Series Angle Type Installation [1] Remove Intake and Exhaust Air Pipes from motor spindle. [2] Insert the straight spindle from the front side of holder and fix it. [3] Mount the intake and exhaust air pipes to the spindle fixed on the holder and attach a hose to the quick disconnect joint. • Urethane hose of 6 x 4 for intake air and 8 x 5 for exhaust air can be installed. Quick Disconnect Joint Intake Air ø6 mm Intake Air Pipe O Ring Set Screw for Intake Air Pipe M5.5X0.5 Quick Disconnect Joint Exhaust Air ø8 mm Exhaust Air Pipe TECHNICAL DATA 8 APPLICATION EXAMPLES O Ring Set Screw for Exhaust Air Pipe M6X0.5 INDEX *The motor speed of 90˚ Angle air connection type motor / spindles are 10% less than that of the straight type. 3-p28 3-p29 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p30 2 1.10" M Recommended Clamping Area • Filter Joint (FJ-02) ø0.24" iSpeed3 COOLANT E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - Modular • (1.61") Max. Tool Mounting Depth (0.58") ø1.18" ø1.0"/ø0.98" ø0.897" 3 0.59" 0.47" Recommended Clamping Area MA 1.10" ø0.897" ø1.18" M Recommended Clamping Area ø1.0" ø0.98" MSS-1908 . MSS-2008 50 MSS-1902 . MSS-2002 40 < Optional > • Collet (CHA-[][]) ................................. ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Collet Nut (CHN-A) ................................. For Collet (CHA) • Metal Saw Arbor (KCH-01A) .... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-01A) ... For grinding wheel with I.D. of ø5 mm ø0.74" MSS-22 SERIES Torque-Speed Characteristics Graph (0.48") Proper Air Pressure (71PSI) 60 1.10" 20 M COOLANT 15 20 25 MSS-2208 MSS-2202 50 • Filter Joint (FJ-01) 30 MSS-20 Series D = ø0.79"(ø20 mm) HPS AS91676 MSS-1930R AS41710 MSS-2030R Model CAT. No. Model Shape 5 10 15 20 25 30 Two recommended clamp areas are laser-marked on the spindle. 30,000 min (rpm) 71PSI Length M 72W 9.2 cN · m Weight (MSS-19 / MSS-20) Price 6.03 oz. / 6.70 oz. 4.37" Straight Model CAT. No. Model AS41601 MSS-1908R AS41609 MSS-2008R Shape Length 72W 36 cN · m M Model CAT. No. Model AS41605 MSS-1902R AS41613 MSS-2002R Shape Rotating Direction Max. Output Max. Torque Length 72W Straight Weight (MSS-19 / MSS-20) Price MSS-2230RA 141 cN · m Model Shape 7.13 oz. / 7.94 oz. AS81680 MSS-2208R Straight 8.82 oz. / 9.67 oz. AS81682 MSS-2208RA Max. Torque Length M 4.37" 72W 9.2 cN · m Weight Price ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" M Xpeed 9.88 oz. 5 AIR LINE KIT Rotating Direction Max. Output Price Max. Torque Length M 72W Weight Price 9.70 oz. 4.99" FWD. (CW) Weight (MSS-19 / MSS-20) 11.39 oz. 4.69" Model Shape 7.62 oz. / 8.50 oz. AS81684 MSS-2202R Straight 9.31 oz. / 10.23 oz. AS81686 MSS-2202RA 7 TECHNICAL DATA Rotating Direction Max. Output Max. Torque Length M 72W 141 cN · m Price 2.09" 5.24" 90˚ Angle Weight 10.23 oz. 5.55" FWD. (CW) 11.92 oz. Standard Equipment · Accessories Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hose (K-221) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-216) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hose (K-221) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-216) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) *Refer to Page 3-p29 for mounting instructions for the 90˚ Angle Type. 6 PARTS 1.54" 36 cN · m 71PSI 1/16 Speed Reduction CAT. No. HTS HPS 8.18 oz. 0.91" 4.06" 90˚ Angle 2.09" 5.24" AS41607 MSS-1902RA AS41615 MSS-2002RA 90˚ Angle Rotating Direction Max. Output 90˚ Angle CAT. No. 2,000 min-1(rpm) 5.55" Straight FWD. (CW) MSS-2230R AS91712 2,000 min-1(rpm) 71PSI 1/16 Speed Reduction CAT. No. AS91710 1.54" 4.69" AS41603 MSS-1908RA AS41611 MSS-2008RA 90˚ Angle TECHNICAL DATA Shape 8,000 min-1(rpm) 71PSI 1/4 Speed Reduction 4.99" Straight FWD. (CW) Model FWD. (CW) 7.73 oz. / 8.43 oz. 4.06" Rotating Direction Max. Output Max. Torque CAT. No. 0.91" 8,000 min-1(rpm) 71PSI 1/4 Speed Reduction PARTS 3-p30 ø1.18" HES810 -1 AS91678 MSS-1930RA AS41712 MSS-2030RA 90˚ Angle CAT. No. INDEX ø0.897" MS ø0.24" Caution : Select one of them for clamping, and do not clamp both areas. Rotating Direction Max. Output Max. Torque FWD. (CW) AIR LINE KIT APPLICATION EXAMPLES ø1.0"/ø0.98" E2530 / E2550 ø1.18" Speed { x 103 min-1(rpm) } 30,000 min-1(rpm) 71PSI Xpeed 8 E2530 / E2550 HES510 MSS-19 Series D = ø0.75"(ø19.05 mm) CAT. No. 7 iSpeed3 4 HTS 6 2 ø1.0" ø0.98" HES510 5 SHEENUS neo SONIC CUTTER ø0.897" 4 HES810 PRESTO II MA 30 0 Two recommended clamp areas are laser-marked on the spindle. IMPULSE 3 40 Speed { x 103 min-1(rpm) } Caution : Select one of them for clamping, and do not clamp both areas. ROTUS E4000 10 ø0.24" 10 MSS-2230 20 Recommended Clamping Area 5 ESPERT E3000 - Modular (1.61") Max. Tool Mounting Depth (0.58") L Recommended Clamping Area 1 EmaxEVO E3000 - One Piece MSS-22 Series 90˚ ANGLE TYPE ( RA) 0.59" 0.47" 0 ø0.24" COOLANT 30 10 • Filter Joint (FJ-01) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MSS-1930 . MSS-2030 60 COOLANT MS • Filter Joint (FJ-02) Proper Air Pressure (71PSI) ø0.74" E4000 (0.48") M Recommended Clamping Area MSS-19 · MSS-20 SERIES Torque-Speed Characteristics Graph L 0 øD-0.01 ø0.46" E3000 - 80,000rpm Recommended Clamping Area 1.10" • MSS-19 · MSS-20 Series 90˚ ANGLE TYPE ( RA) øD -0.01 -0.02 E3000 - One Piece 0.59" 0.47" < Optional > • Collet (CHA-[][]) ................................. ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Collet Nut (CHN-A) ................................. For Collet (CHA) • Metal Saw Arbor (KCH-01A) .... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-01A) ... For grinding wheel with I.D. of ø5 mm ø0.74" Recommended Clamping Area -0.02 mm ø22-0.01 (ø0.87") 0.59" 0.47" • Proper Air Pressure ........................................ 42~71PSI • Air Consumption ............................................. 5.47CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø5.7 mm (O.D.) : Exhaust Air .......... ø6.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHA-3.175) ............................ ø1/8" Torque (cN.m) øD -0.01 -0.02 SHEENUS neo SONIC CUTTER 0 øD -0.01 ø0.46" PRESTO II 0.79" -0.02 mm ø22-0.01 (ø0.87") 0.79" IMPULSE (1.61") Max. Tool Mounting Depth (0.58") L ø0.46" ROTUS L • 0 ø22-0.01 mm (ø0.87") (1.61") Max. Tool Mounting Depth (0.58") 30,000 · 8,000 · 2,000 min-1(rpm) STRAIGHT · 90° ANGLE TYPE MSS-22 Series STRAIGHT TYPE ( R) 0 ø22-0.01 mm (ø0.87") • • Proper Air Pressure ........................................ 42~71PSI • Air Consumption ............................................. 5.47CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø5.7 mm (O.D.) : Exhaust Air .......... ø6.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHA-3.175) ............................ ø1/8" MSS-19 · MSS-20 Series STRAIGHT TYPE ( R) ESPERT MSS-22 SERIES STRAIGHT · 90°ANGLE TYPE 30,000 · 8,000 · 2,000 min-1(rpm) Torque (cN.m) 1 EmaxEVO MSS-19 · MSS-20 SERIES ULTRA-PRECISION mm) SPINDLE O.D. ø0.87"(ø22 mm) ø0.46" ULTRA-PRECISION AIR MOTOR SPINDLE O.D. ø1.18"(ø30 mm) SPINDLE ø0.75"(ø19.05 mm), ø0.79"(ø20 mm)

8 APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p31 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p30 2 1.10" M Recommended Clamping Area • Filter Joint (FJ-02) ø0.24" iSpeed3 COOLANT E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - Modular • (1.61") Max. Tool Mounting Depth (0.58") ø1.18" ø1.0"/ø0.98" ø0.897" 3 0.59" 0.47" Recommended Clamping Area MA 1.10" ø0.897" ø1.18" M Recommended Clamping Area ø1.0" ø0.98" MSS-1908 . MSS-2008 50 MSS-1902 . MSS-2002 40 < Optional > • Collet (CHA-[][]) ................................. ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Collet Nut (CHN-A) ................................. For Collet (CHA) • Metal Saw Arbor (KCH-01A) .... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-01A) ... For grinding wheel with I.D. of ø5 mm ø0.74" MSS-22 SERIES Torque-Speed Characteristics Graph (0.48") Proper Air Pressure (71PSI) 60 1.10" 20 M COOLANT 15 20 25 MSS-2208 MSS-2202 50 • Filter Joint (FJ-01) 30 MSS-20 Series D = ø0.79"(ø20 mm) HPS AS91676 MSS-1930R AS41710 MSS-2030R Model CAT. No. Model Shape 5 10 15 20 25 30 Two recommended clamp areas are laser-marked on the spindle. 30,000 min (rpm) 71PSI Length M 72W 9.2 cN · m Weight (MSS-19 / MSS-20) Price 6.03 oz. / 6.70 oz. 4.37" Straight Model CAT. No. Model AS41601 MSS-1908R AS41609 MSS-2008R Shape Length 72W 36 cN · m M Model CAT. No. Model AS41605 MSS-1902R AS41613 MSS-2002R Shape Rotating Direction Max. Output Max. Torque Length 72W Straight Weight (MSS-19 / MSS-20) Price MSS-2230RA 141 cN · m Model Shape 7.13 oz. / 7.94 oz. AS81680 MSS-2208R Straight 8.82 oz. / 9.67 oz. AS81682 MSS-2208RA Max. Torque Length M 4.37" 72W 9.2 cN · m Weight Price ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" M Xpeed 9.88 oz. 5 AIR LINE KIT Rotating Direction Max. Output Price Max. Torque Length M 72W Weight Price 9.70 oz. 4.99" FWD. (CW) Weight (MSS-19 / MSS-20) 11.39 oz. 4.69" Model Shape 7.62 oz. / 8.50 oz. AS81684 MSS-2202R Straight 9.31 oz. / 10.23 oz. AS81686 MSS-2202RA 7 TECHNICAL DATA Rotating Direction Max. Output Max. Torque Length M 72W 141 cN · m Price 2.09" 5.24" 90˚ Angle Weight 10.23 oz. 5.55" FWD. (CW) 11.92 oz. Standard Equipment · Accessories Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hose (K-221) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-216) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Hose (K-221) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-216) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) *Refer to Page 3-p29 for mounting instructions for the 90˚ Angle Type. 6 PARTS 1.54" 36 cN · m 71PSI 1/16 Speed Reduction CAT. No. HTS HPS 8.18 oz. 0.91" 4.06" 90˚ Angle 2.09" 5.24" AS41607 MSS-1902RA AS41615 MSS-2002RA 90˚ Angle Rotating Direction Max. Output 90˚ Angle CAT. No. 2,000 min-1(rpm) 5.55" Straight FWD. (CW) MSS-2230R AS91712 2,000 min-1(rpm) 71PSI 1/16 Speed Reduction CAT. No. AS91710 1.54" 4.69" AS41603 MSS-1908RA AS41611 MSS-2008RA 90˚ Angle TECHNICAL DATA Shape 8,000 min-1(rpm) 71PSI 1/4 Speed Reduction 4.99" Straight FWD. (CW) Model FWD. (CW) 7.73 oz. / 8.43 oz. 4.06" Rotating Direction Max. Output Max. Torque CAT. No. 0.91" 8,000 min-1(rpm) 71PSI 1/4 Speed Reduction PARTS 3-p30 ø1.18" HES810 -1 AS91678 MSS-1930RA AS41712 MSS-2030RA 90˚ Angle CAT. No. INDEX ø0.897" MS ø0.24" Caution : Select one of them for clamping, and do not clamp both areas. Rotating Direction Max. Output Max. Torque FWD. (CW) AIR LINE KIT APPLICATION EXAMPLES ø1.0"/ø0.98" E2530 / E2550 ø1.18" Speed { x 103 min-1(rpm) } 30,000 min-1(rpm) 71PSI Xpeed 8 E2530 / E2550 HES510 MSS-19 Series D = ø0.75"(ø19.05 mm) CAT. No. 7 iSpeed3 4 HTS 6 2 ø1.0" ø0.98" HES510 5 SHEENUS neo SONIC CUTTER ø0.897" 4 HES810 PRESTO II MA 30 0 Two recommended clamp areas are laser-marked on the spindle. IMPULSE 3 40 Speed { x 103 min-1(rpm) } Caution : Select one of them for clamping, and do not clamp both areas. ROTUS E4000 10 ø0.24" 10 MSS-2230 20 Recommended Clamping Area 5 ESPERT E3000 - Modular (1.61") Max. Tool Mounting Depth (0.58") L Recommended Clamping Area 1 EmaxEVO E3000 - One Piece MSS-22 Series 90˚ ANGLE TYPE ( RA) 0.59" 0.47" 0 ø0.24" COOLANT 30 10 • Filter Joint (FJ-01) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MSS-1930 . MSS-2030 60 COOLANT MS • Filter Joint (FJ-02) Proper Air Pressure (71PSI) ø0.74" E4000 (0.48") M Recommended Clamping Area MSS-19 · MSS-20 SERIES Torque-Speed Characteristics Graph L 0 øD-0.01 ø0.46" E3000 - 80,000rpm Recommended Clamping Area 1.10" • MSS-19 · MSS-20 Series 90˚ ANGLE TYPE ( RA) øD -0.01 -0.02 E3000 - One Piece 0.59" 0.47" < Optional > • Collet (CHA-[][]) ................................. ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Collet Nut (CHN-A) ................................. For Collet (CHA) • Metal Saw Arbor (KCH-01A) .... For ø0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-01A) ... For grinding wheel with I.D. of ø5 mm ø0.74" Recommended Clamping Area -0.02 mm ø22-0.01 (ø0.87") 0.59" 0.47" • Proper Air Pressure ........................................ 42~71PSI • Air Consumption ............................................. 5.47CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø5.7 mm (O.D.) : Exhaust Air .......... ø6.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHA-3.175) ............................ ø1/8" Torque (cN.m) øD -0.01 -0.02 SHEENUS neo SONIC CUTTER 0 øD -0.01 ø0.46" PRESTO II 0.79" -0.02 mm ø22-0.01 (ø0.87") 0.79" IMPULSE (1.61") Max. Tool Mounting Depth (0.58") L ø0.46" ROTUS L • 0 ø22-0.01 mm (ø0.87") (1.61") Max. Tool Mounting Depth (0.58") 30,000 · 8,000 · 2,000 min-1(rpm) STRAIGHT · 90° ANGLE TYPE MSS-22 Series STRAIGHT TYPE ( R) 0 ø22-0.01 mm (ø0.87") • • Proper Air Pressure ........................................ 42~71PSI • Air Consumption ............................................. 5.47CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø5.7 mm (O.D.) : Exhaust Air .......... ø6.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHA-3.175) ............................ ø1/8" MSS-19 · MSS-20 Series STRAIGHT TYPE ( R) ESPERT MSS-22 SERIES STRAIGHT · 90°ANGLE TYPE 30,000 · 8,000 · 2,000 min-1(rpm) Torque (cN.m) 1 EmaxEVO MSS-19 · MSS-20 SERIES ULTRA-PRECISION mm) SPINDLE O.D. ø0.87"(ø22 mm) ø0.46" ULTRA-PRECISION AIR MOTOR SPINDLE O.D. ø1.18"(ø30 mm) SPINDLE ø0.75"(ø19.05 mm), ø0.79"(ø20 mm)

8 APPLICATION EXAMPLES INDEX * Order by catalog number. 3-p31 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p32 0.28" 0.83" 1.02" Recommended Clamping Area 2 1.97" M -0.01 ø23-0.02 mm (ø0.91") SHEENUS neo SONIC CUTTER ø0.63" PRESTO II 0 ø23-0.01 mm (ø0.91") IMPULSE Recommended Clamping Area • Filter Joint (FJ-02) < Optional > • Collet (CHK-[][]) ............................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .................................. For Collet (CHK) • Metal Saw Arbor (KCH-03) ...... For ø0.24" (I.D.) x ø 1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm ø0.24" iSpeed3 COOLANT E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - Modular • MSST-23 Series 90˚ ANGLE TYPE ( RA) (2.05") Max. Tool Mounting Depth (0.67") ø1.18" ø1.0"/ø0.98" ø0.897" ø0.89" 3 0.83" 1.02" Recommended Clamping Area MA 1.97" ø0.897" M Recommended Clamping Area ø1.0" ø0.98" ø1.18" Proper Air Pressure (71PSI) MSST-2330 90 ø0.63" E4000 (0.53") 0 ø23-0.01 mm (ø0.91") E3000 - 80,000rpm 80 MSST-2308 70 MSST-2302 0.83" 1.02" Recommended Clamping Area 1.97" M Recommended Clamping Area • ø0.24" MSSH-25 · MSS-25 Series 90˚ ANGLE TYPE ( RA) (2.05") Max. Tool Mounting Depth (0.67") < Optional > • Collet (CHK-[][]) ............................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .................................. For Collet (CHK) • Metal Saw Arbor (KCH-03) ....... For ø 0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm 0.83" MSSH · MSS-25 SERIES Torque-Speed Characteristics Graph L 1.02" Recommended Clamping Area 50 1.97" 40 Proper Air Pressure (71PSI) M Recommended Clamping Area 30 60 MSSH-2524, MSS-2524 MSSH-2506, MSS-2506 MSSH-2501, MSS-2501 50 40 • Filter Joint (FJ-01) 0 10 15 20 25 0 Speed { x 103 min-1(rpm) } 5 10 15 103 20 25 30 min-1(rpm) } Two recommended clamp areas are laser-marked on the spindle. Caution : Select one of them for clamping, and do not clamp both areas. HES510 71PSI CAT. No. Model Shape HPS AS41637 MSST-2330R Straight Rotating Direction Max. Output 6 AS41639 8,000 min-1(rpm) MSST-2330RA 7 8 APPLICATION EXAMPLES INDEX Length M 13.7 cN · m Weight Price 11.57 oz. MSS Series D = ø0.98"(ø25 mm) CAT. No. Model CAT. No. Model AS81721 MSSH-2524R AS81690 MSS-2524R Model Shape AS41645 MSST-2308R Straight AS41647 MSST-2308RA 5.27" Rotating Direction Max. Output AS81723 MSSH-2524RA AS81692 MSS-2524RA Max. Torque Length M 108W 52 cN · m Weight Price CAT. No. Model CAT. No. Model AS41653 MSST-2302R Straight AS41655 MSST-2302RA Max. Torque Straight Length E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 M 5.17" 130W 22.5 cN · m 90˚ Angle Shape 14.64 oz. AS81729 MSSH-2506R AS81698 MSS-2506R Straight 16.08 oz. AS81731 MSSH-2506RA AS81700 MSS-2506RA 90˚ Angle 2.28" 6.56" Weight Price Rotating Direction Max. Output Max. Torque Length Xpeed 15.38 oz. M 6.46" 130W 85 cN · m 5 Weight AIR LINE KIT Price 6 1 lb. 1.11 oz. PARTS 2.28" 6.72" 1 lb. 2.55 oz. 7 1,500 min-1(rpm) 71PSI R / 1,400 min-1(rpm) 71PSI RA 1/16 Speed Reduction Rotating Direction Max. Output Max. Torque Length M 6.47" FWD. (CW) 108W 202 cN · m Price CAT. No. Model CAT. No. Model Shape 14.29 oz. AS81737 MSSH-2501R AS81706 MSS-2501R Straight 15.73 oz. AS81739 MSSH-2501RA AS81708 MSS-2501RA 90˚ Angle 2.44" 6.73" 90˚ Angle Weight Rotating Direction Max. Output *Refer to Page 3-p29 for mounting instructions for the 90˚ Angle Type. Length M 6.63" FWD. (CW) Standard Equipment · Accessories Max. Torque 130W 332 cN · m Weight 1 lb. 0.76 oz. 2.44" 6.89" HTS HPS 13.93 oz. 0.98" 5.43" FWD. (CW) 71PSI 1/16 Speed Reduction Shape Rotating Direction Max. Output FWD. (CW) 13.02 oz. 6.30" FWD. (CW) Model Shape 6,000 min-1(rpm) 71PSI R / 5,500 min-1(rpm) 71PSI RA 1/4 Speed Reduction 90˚ Angle CAT. No. 24,000 min-1(rpm) 71PSI R / 22,000 min-1(rpm) 71PSI RA 0.98" • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. • Hose (K-204) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-216) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) 3-p32 MSSH Series D = ø1.0"(ø25.4 mm) 71PSI 1/4 Speed Reduction CAT. No. 2,000 min-1(rpm) 108W 90˚ Angle PARTS TECHNICAL DATA Max. Torque 5.01" FWD. (CW) Xpeed 5 iSpeed3 HES510 30,000 min-1(rpm) HTS AIR LINE KIT 2 4 4 HES810 SHEENUS neo SONIC CUTTER ø1.18" Speed { x Two recommended clamp areas are laser-marked on the spindle. PRESTO II MS 30 Caution : Select one of them for clamping, and do not clamp both areas. IMPULSE ø1.0" ø0.98" ø0.24" • Filter Joint (FJ-01) 5 ROTUS ø0.897" 20 COOLANT ø0.24" ESPERT MA 30 10 MS 1 EmaxEVO E3000 - Modular (0.53") 10 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" • Filter Joint (FJ-02) COOLANT 60 20 COOLANT (0.53") L 0.28" MSST-23 SERIES Torque-Speed Characteristics Graph L -0.01 ø23-0.02 mm (ø0.91") E3000 - One Piece (2.05") Max. Tool Mounting Depth (0.67") Torque (cN.m) (0.53") L 24,000 · 6,000 · 1,500 min-1(rpm) • Proper Air Pressure ......................................... 42~71PSI • Air Consumption (R-type) : ............................... 7.24CFM (RA-type) : ............................... 6.00CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø6.7 mm (O.D.) : Exhaust Air .......... ø7.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHK-3.175) ........................... ø 1/8" ø0.97" ROTUS • øD -0.01 -0.02 (2.05") Max. Tool Mounting Depth (0.67") MSSH-25 · MSS-25 Series STRAIGHT TYPE ( R) 0 øD -0.01 ø0.63" ESPERT STRAIGHT · 90°ANGLE TYPE 0 øD -0.01 ø0.63" • • Proper Air Pressure ........................................ 42~71PSI • Air Consumption (R-type) : ............................... 6.71CFM (RA-type) : ............................... 6.00CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø6.7 mm (O.D.) : Exhaust Air .......... ø7.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHK-3.175) ............................ ø1/8" MSST-23 Series STRAIGHT TYPE ( R) MSSH-25 · MSS-25 SERIES 30,000 · 8,000 · 2,000 min-1(rpm) STRAIGHT · 90° ANGLE TYPE Torque (cN.m) 1 EmaxEVO MSST-23 SERIES > ULTRA-PRECISION ø1.18"(ø30 mm) O.D. ø1.0"(ø25.4 mm), ø0.98"(ø25 mm)

1 lb. 2.20 oz. TECHNICAL DATA Price 8 APPLICATION EXAMPLES INDEX Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. • Hose (K-204) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-256) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) * Order by catalog number. 3-p33 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p32 0.28" 0.83" 1.02" Recommended Clamping Area 2 1.97" M -0.01 ø23-0.02 mm (ø0.91") SHEENUS neo SONIC CUTTER ø0.63" PRESTO II 0 ø23-0.01 mm (ø0.91") IMPULSE Recommended Clamping Area • Filter Joint (FJ-02) < Optional > • Collet (CHK-[][]) ............................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .................................. For Collet (CHK) • Metal Saw Arbor (KCH-03) ...... For ø0.24" (I.D.) x ø 1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm ø0.24" iSpeed3 COOLANT E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - Modular • MSST-23 Series 90˚ ANGLE TYPE ( RA) (2.05") Max. Tool Mounting Depth (0.67") ø1.18" ø1.0"/ø0.98" ø0.897" ø0.89" 3 0.83" 1.02" Recommended Clamping Area MA 1.97" ø0.897" M Recommended Clamping Area ø1.0" ø0.98" ø1.18" Proper Air Pressure (71PSI) MSST-2330 90 ø0.63" E4000 (0.53") 0 ø23-0.01 mm (ø0.91") E3000 - 80,000rpm 80 MSST-2308 70 MSST-2302 0.83" 1.02" Recommended Clamping Area 1.97" M Recommended Clamping Area • ø0.24" MSSH-25 · MSS-25 Series 90˚ ANGLE TYPE ( RA) (2.05") Max. Tool Mounting Depth (0.67") < Optional > • Collet (CHK-[][]) ............................... ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Collet Nut (K-265) .................................. For Collet (CHK) • Metal Saw Arbor (KCH-03) ....... For ø 0.24" (I.D.) x ø1.18" (O.D.) • Grindstone Arbor (AGM-03) ... For grinding wheel with I.D. of ø5 mm 0.83" MSSH · MSS-25 SERIES Torque-Speed Characteristics Graph L 1.02" Recommended Clamping Area 50 1.97" 40 Proper Air Pressure (71PSI) M Recommended Clamping Area 30 60 MSSH-2524, MSS-2524 MSSH-2506, MSS-2506 MSSH-2501, MSS-2501 50 40 • Filter Joint (FJ-01) 0 10 15 20 25 0 Speed { x 103 min-1(rpm) } 5 10 15 103 20 25 30 min-1(rpm) } Two recommended clamp areas are laser-marked on the spindle. Caution : Select one of them for clamping, and do not clamp both areas. HES510 71PSI CAT. No. Model Shape HPS AS41637 MSST-2330R Straight Rotating Direction Max. Output 6 AS41639 8,000 min-1(rpm) MSST-2330RA 7 8 APPLICATION EXAMPLES INDEX Length M 13.7 cN · m Weight Price 11.57 oz. MSS Series D = ø0.98"(ø25 mm) CAT. No. Model CAT. No. Model AS81721 MSSH-2524R AS81690 MSS-2524R Model Shape AS41645 MSST-2308R Straight AS41647 MSST-2308RA 5.27" Rotating Direction Max. Output AS81723 MSSH-2524RA AS81692 MSS-2524RA Max. Torque Length M 108W 52 cN · m Weight Price CAT. No. Model CAT. No. Model AS41653 MSST-2302R Straight AS41655 MSST-2302RA Max. Torque Straight Length E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES810 M 5.17" 130W 22.5 cN · m 90˚ Angle Shape 14.64 oz. AS81729 MSSH-2506R AS81698 MSS-2506R Straight 16.08 oz. AS81731 MSSH-2506RA AS81700 MSS-2506RA 90˚ Angle 2.28" 6.56" Weight Price Rotating Direction Max. Output Max. Torque Length Xpeed 15.38 oz. M 6.46" 130W 85 cN · m 5 Weight AIR LINE KIT Price 6 1 lb. 1.11 oz. PARTS 2.28" 6.72" 1 lb. 2.55 oz. 7 1,500 min-1(rpm) 71PSI R / 1,400 min-1(rpm) 71PSI RA 1/16 Speed Reduction Rotating Direction Max. Output Max. Torque Length M 6.47" FWD. (CW) 108W 202 cN · m Price CAT. No. Model CAT. No. Model Shape 14.29 oz. AS81737 MSSH-2501R AS81706 MSS-2501R Straight 15.73 oz. AS81739 MSSH-2501RA AS81708 MSS-2501RA 90˚ Angle 2.44" 6.73" 90˚ Angle Weight Rotating Direction Max. Output *Refer to Page 3-p29 for mounting instructions for the 90˚ Angle Type. Length M 6.63" FWD. (CW) Standard Equipment · Accessories Max. Torque 130W 332 cN · m Weight 1 lb. 0.76 oz. 2.44" 6.89" HTS HPS 13.93 oz. 0.98" 5.43" FWD. (CW) 71PSI 1/16 Speed Reduction Shape Rotating Direction Max. Output FWD. (CW) 13.02 oz. 6.30" FWD. (CW) Model Shape 6,000 min-1(rpm) 71PSI R / 5,500 min-1(rpm) 71PSI RA 1/4 Speed Reduction 90˚ Angle CAT. No. 24,000 min-1(rpm) 71PSI R / 22,000 min-1(rpm) 71PSI RA 0.98" • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. • Hose (K-204) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-216) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) 3-p32 MSSH Series D = ø1.0"(ø25.4 mm) 71PSI 1/4 Speed Reduction CAT. No. 2,000 min-1(rpm) 108W 90˚ Angle PARTS TECHNICAL DATA Max. Torque 5.01" FWD. (CW) Xpeed 5 iSpeed3 HES510 30,000 min-1(rpm) HTS AIR LINE KIT 2 4 4 HES810 SHEENUS neo SONIC CUTTER ø1.18" Speed { x Two recommended clamp areas are laser-marked on the spindle. PRESTO II MS 30 Caution : Select one of them for clamping, and do not clamp both areas. IMPULSE ø1.0" ø0.98" ø0.24" • Filter Joint (FJ-01) 5 ROTUS ø0.897" 20 COOLANT ø0.24" ESPERT MA 30 10 MS 1 EmaxEVO E3000 - Modular (0.53") 10 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" • Filter Joint (FJ-02) COOLANT 60 20 COOLANT (0.53") L 0.28" MSST-23 SERIES Torque-Speed Characteristics Graph L -0.01 ø23-0.02 mm (ø0.91") E3000 - One Piece (2.05") Max. Tool Mounting Depth (0.67") Torque (cN.m) (0.53") L 24,000 · 6,000 · 1,500 min-1(rpm) • Proper Air Pressure ......................................... 42~71PSI • Air Consumption (R-type) : ............................... 7.24CFM (RA-type) : ............................... 6.00CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø6.7 mm (O.D.) : Exhaust Air .......... ø7.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHK-3.175) ........................... ø 1/8" ø0.97" ROTUS • øD -0.01 -0.02 (2.05") Max. Tool Mounting Depth (0.67") MSSH-25 · MSS-25 Series STRAIGHT TYPE ( R) 0 øD -0.01 ø0.63" ESPERT STRAIGHT · 90°ANGLE TYPE 0 øD -0.01 ø0.63" • • Proper Air Pressure ........................................ 42~71PSI • Air Consumption (R-type) : ............................... 6.71CFM (RA-type) : ............................... 6.00CFM • Spindle Accuracy ........................................ Within 2 µm • Length of Motor Hose .............................................. 6 ft • Hose Diameter (R-type) : Air Intake ............. ø6.7 mm (O.D.) : Exhaust Air .......... ø7.5 mm (O.D.) • Hose Diameter (RA-type) : Air Intake ........... ø6.0 mm (O.D.) : Exhaust Air ........ ø8.0 mm (O.D.) • Standard Size Collet (CHK-3.175) ............................ ø1/8" MSST-23 Series STRAIGHT TYPE ( R) MSSH-25 · MSS-25 SERIES 30,000 · 8,000 · 2,000 min-1(rpm) STRAIGHT · 90° ANGLE TYPE Torque (cN.m) 1 EmaxEVO MSST-23 SERIES > ULTRA-PRECISION ø1.18"(ø30 mm) O.D. ø1.0"(ø25.4 mm), ø0.98"(ø25 mm)

1 lb. 2.20 oz. TECHNICAL DATA Price 8 APPLICATION EXAMPLES INDEX Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. • Hose (K-204) (R type) : 6 ft • Hose (K-215) (RA type) : ø6 mm x 6 ft • Hose (K-256) (RA type) : ø8 mm x 3 ft • Silencer (K-209) (R type) • Silencer (K-208) (RA type) * Order by catalog number. 3-p33 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p34 AIR LINE KIT & OIL CAT. No. 4502 1 AIR LINE KIT AL-M1202 0.79" EmaxEVO ESPERT 11.81" 10.24" 0.79" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" ROTUS IMPULSE PRESTO II 8.66" 6.69" CAT. No. Model 2-ø7mm iSpeed3 4502 AL-M1202 1.18" ø1.0"/ø0.98" E3000 - One Piece 4.7 2" E2530 / E2550 ø0.897" SHEENUS neo SONIC CUTTER Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 2 E2530 / E2550 ROTUS ø6 mm PF1/4 SHEENUS neo SONIC CUTTER ESPERT IMPULSE R3.5mm ø15mm PRESTO II 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 4-ø7mm E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm CAT. No. 4503 AIR LINE KIT AL-M1203BS2 E4000 ø6 mm MA PF1/4 ø0.897" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. HES810 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 17.72" 19.29" MA ø0.897" MS CAT. No. Model 4503 AL-M1203 BS2 4 HES510 3 ø1.18" Alarm Buzzer 4-ø9 mm E4000 ø1.0" ø0.98" Solenoid Operated Valve 12.60" 11.02" MS E3000 - 80,000rpm The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator 3 ø1.18" ø1.0"/ø0.98" ø0.897" Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 AIR LINE KIT 6 PARTS 7 5 LUBRICATING OIL AIR LINE KIT 6 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 Product Price 7 TECHNICAL DATA 8 APPLICATION EXAMPLES TECHNICAL DATA Lubricating Oil (32 oz.) CAT. No. AA10480 Model Product Price 8 APPLICATION EXAMPLES K-202 INDEX 3-p34 PARTS INDEX * Order by catalog number. 3-p35 3-p26-35_MS_A_1407.qxd 14.8.2 10:41 PM ページ 3-p34 AIR LINE KIT & OIL CAT. No. 4502 1 AIR LINE KIT AL-M1202 0.79" EmaxEVO ESPERT 11.81" 10.24" 0.79" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" ROTUS IMPULSE PRESTO II 8.66" 6.69" CAT. No. Model 2-ø7mm iSpeed3 4502 AL-M1202 1.18" ø1.0"/ø0.98" E3000 - One Piece 4.7 2" E2530 / E2550 ø0.897" SHEENUS neo SONIC CUTTER Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 2 E2530 / E2550 ROTUS ø6 mm PF1/4 SHEENUS neo SONIC CUTTER ESPERT IMPULSE R3.5mm ø15mm PRESTO II 1 EmaxEVO Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 4-ø7mm E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm CAT. No. 4503 AIR LINE KIT AL-M1203BS2 E4000 ø6 mm MA PF1/4 ø0.897" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. HES810 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 17.72" 19.29" MA ø0.897" MS CAT. No. Model 4503 AL-M1203 BS2 4 HES510 3 ø1.18" Alarm Buzzer 4-ø9 mm E4000 ø1.0" ø0.98" Solenoid Operated Valve 12.60" 11.02" MS E3000 - 80,000rpm The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator 3 ø1.18" ø1.0"/ø0.98" ø0.897" Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 AIR LINE KIT 6 PARTS 7 5 LUBRICATING OIL AIR LINE KIT 6 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 Product Price 7 TECHNICAL DATA 8 APPLICATION EXAMPLES TECHNICAL DATA Lubricating Oil (32 oz.) CAT. No. AA10480 Model Product Price 8 APPLICATION EXAMPLES K-202 INDEX 3-p34 PARTS INDEX * Order by catalog number. 3-p35 4-p0-9_HES510_A_1407.qxd 14.8.2 7:57 PM ページ 1 HSM SOLUTIONS HES Series Electric System 1 EmaxEVO 1 Upgrade your existing NC Milling machines and CNC machining centers to high speed machines. EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 HES510 5,000~50,000 min-1(rpm) Output : 340W BT30 / 40 / 50, NT30 / 40 / 50 (M), CAT40 / 50 IT40 / 50, ST32, R8, HSK A63 / A100 PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 MA HES810 ø0.897" ø1.0" ø0.98" ø1.18" 4 MA ø0.897" 20,000~80,000 min-1(rpm) Output : 350W MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 3 ø1.0" ø0.98" ø1.18" MS BT30 / 40 / 50, NT40, CAT40 HSK A63, ST32 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 4-p1 4-p0-9_HES510_A_1407.qxd 14.8.2 7:57 PM ページ 1 HSM SOLUTIONS HES Series Electric System 1 EmaxEVO 1 Upgrade your existing NC Milling machines and CNC machining centers to high speed machines. EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 HES510 5,000~50,000 min-1(rpm) Output : 340W BT30 / 40 / 50, NT30 / 40 / 50 (M), CAT40 / 50 IT40 / 50, ST32, R8, HSK A63 / A100 PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 MA HES810 ø0.897" ø1.0" ø0.98" ø1.18" 4 MA ø0.897" 20,000~80,000 min-1(rpm) Output : 350W MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 3 ø1.0" ø0.98" ø1.18" MS BT30 / 40 / 50, NT40, CAT40 HSK A63, ST32 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 4-p1 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p2 “HES • HTS • HPS SERIES” SPECIFICATION'S COMPARISON UPGRADE YOUR EXISTING NC MILLING MACHINES AND CNC MACHINING CENTERS TO HIGH SPEED MACHINES 1 • EmaxEVO ESPERT • ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE “HES SERIES” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE HES510 • The Ultra-Precision, High-Speed HES510 spindles allow you to use your existing equipment for a much larger variety of operations. Conventional milling machines and machining centers can now do high-speed machining, small diameter drilling and milling with extremely good surface finishes with the HES510. Max. Output 340W • EmaxEVO • 5,000-50,000 min (rpm) • Maximum Output 340W “HTS SERIES” • Cooling Air -1 IMPULSE The HES510 motor is a brushless DC motor that utilizes hall elements and rare-earth magnets to realize max. output 340W in a very compact size. PRESTO II SHEENUS neo SONIC CUTTER • Ceramic Bearings iSpeed3 • ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular • ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • HIGH-SPEED AIR MOTOR MILLING SPINDLE “HPS SERIES” ESPERT Clean dry air is required to cool the motor and protect the spindle from contaminants. Please use a filter and regulator. MA • ø0.897" ø1.0" ø0.98" ø1.18" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Smooth Rotation E2530 / E2550 The absence of a commutator and the use of a photo coupler sending a feedback signal of 48 pulses per revolution result in very smooth rotation with low vibration throughout the speed range. E3000 - One Piece One-Piece motor and spindle construction ø1.18" ø0.897" E3000 - Modular ø1.0"/ø0.98" ø0.897" The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines. E3000 - 80,000rpm E4000 3 MA Excellent Durability by air-cooling system ø0.897" ø1.0" ø0.98" Air-cooling motor uses a small volume of air (1.0 CFM) to prevent heat buildup and allow long, continuous operation. ø1.18" • Best for small diameter drilling and milling MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Less than ø0.08" (ø2 mm) small diameter drilling and milling with extremely good surface finishes, using a high-speed brushless motor. 4 4 HES510 HES510 Specification's Comparison HES510 Specifications HES810 Driven System Xpeed 5 AIR LINE KIT HES510 5,000 ~ 50,000 HES Series HES510 HES810 Speed {min-1(rpm)} Max. Output Power 340W Available Chuck Size Max. ø1/4" Electric System (Brushless Motor) HES810 20,000 ~ 80,000 6 350W Max. ø4.0 mm Shank BT30 / 40 / 50 NT30 / 40 / 50 (M) CAT40 / 50, IT40 / 50 ST32, R8 HSK A63 / A100 BT30 / 40 / 50 NT40 CAT40 HSK A63, ST32 PARTS 7 HTS Series TECHNICAL DATA Air System (Air Turbine) 150,000 (71PSI) 25W Max. ø4.0 mm 8 APPLICATION EXAMPLES INDEX 4-p2 HPS Series Air System (Air Motor) HPS250 25,000 (73PSI) 77W (73PSI) HPS500 50,000 (73PSI) 51W (73PSI) Straight ø20 mm BT30 / 40 / 50 HSK E25 / 32 / 40 / 50 HSK A63, HSK F63 NE211 NE211 • Speed ................................................................... 5,000-50,000 min-1(rpm) • Max. Output Power .......................................................................... 340W • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHK-3.175) ........................................................ ø1/8" • HTS Torque & Output Power Characteristic of HES510 < Optional > • Air Line Kit (AL-C1204) .............................................. For Control Unit NE211 • Collet (CHK-[][]) ............................................................ ø0.5 mm-ø6.35 mm (See Page 6-p3 for details) • Motor Cord (EMCD-810-[][]) .......... Length 13 ft (9248) / 19 ft (9249) / 26 ft (9250) Provided with Air Cooling Hose ø4 mm 450 Torque 8 350 6 300 5 250 Output 4 200 3 150 2 BT30 CAT40 AIR LINE KIT 6 PARTS 100 Continuous Duty Area 50 0 Motor Cord is sold separately. 5 400 7 1 Note : HPS Xpeed 9 0 10 20 Speed { x 30 103 min-1(rpm) 40 50 } 7 TECHNICAL DATA 8 APPLICATION EXAMPLES HES510 Connection Drawing Max. ø1/4" Max. ø4.0 mm Notes Output (W) HPS Series . HTS Torque (cN m) HES810 SHEENUS neo SONIC CUTTER 2 The control unit is compact and lightweight. It features a protection circuit to stop the motor automatically in case of overload ensuring safe and smooth operation. The system incorporates an emergency, breakaway connector to help prevent system damage in case the machine's main spindle is rotated accidentally. 3 IMPULSE PRESTO II • Large Variety of Tapers Available • Protection Circuit • Emergency Connector E4000 ROTUS (Proper air pressure 28-42PSI) (Use Air Line Kit AL-C1204) BT, NT, CAT, IT, ST32, R8 and HSK A tapers are available. The spindle uses a double pair of ceramic bearings in the front and in the rear. This arrangement maximizes both radial and axial rigidity to insure extremely high-precision cutting. The motor also uses ceramic bearings to maximize life expectancy. 2 E2530 / E2550 1 HES510 Features ULTRA-HIGH SPEED AIR TURBINE MILLING SPINDLE ROTUS Electric System The HES510 motor and spindle require dry, clean, regulated air. Please refer to the drawing to the right for proper components. Air Line Kit AL-C1204 supplies clean dry air to the control unit through the filter and the regulator. INDEX Compressor Air Line Kit AL-C1204 (Refer to 4-p9 in detail) Control Unit NE211 (Refer to 4-p8 in detail) HES 510 4-p3 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p2 “HES • HTS • HPS SERIES” SPECIFICATION'S COMPARISON UPGRADE YOUR EXISTING NC MILLING MACHINES AND CNC MACHINING CENTERS TO HIGH SPEED MACHINES 1 • EmaxEVO ESPERT • ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE “HES SERIES” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE HES510 • The Ultra-Precision, High-Speed HES510 spindles allow you to use your existing equipment for a much larger variety of operations. Conventional milling machines and machining centers can now do high-speed machining, small diameter drilling and milling with extremely good surface finishes with the HES510. Max. Output 340W • EmaxEVO • 5,000-50,000 min (rpm) • Maximum Output 340W “HTS SERIES” • Cooling Air -1 IMPULSE The HES510 motor is a brushless DC motor that utilizes hall elements and rare-earth magnets to realize max. output 340W in a very compact size. PRESTO II SHEENUS neo SONIC CUTTER • Ceramic Bearings iSpeed3 • ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular • ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm • HIGH-SPEED AIR MOTOR MILLING SPINDLE “HPS SERIES” ESPERT Clean dry air is required to cool the motor and protect the spindle from contaminants. Please use a filter and regulator. MA • ø0.897" ø1.0" ø0.98" ø1.18" iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Smooth Rotation E2530 / E2550 The absence of a commutator and the use of a photo coupler sending a feedback signal of 48 pulses per revolution result in very smooth rotation with low vibration throughout the speed range. E3000 - One Piece One-Piece motor and spindle construction ø1.18" ø0.897" E3000 - Modular ø1.0"/ø0.98" ø0.897" The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines. E3000 - 80,000rpm E4000 3 MA Excellent Durability by air-cooling system ø0.897" ø1.0" ø0.98" Air-cooling motor uses a small volume of air (1.0 CFM) to prevent heat buildup and allow long, continuous operation. ø1.18" • Best for small diameter drilling and milling MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Less than ø0.08" (ø2 mm) small diameter drilling and milling with extremely good surface finishes, using a high-speed brushless motor. 4 4 HES510 HES510 Specification's Comparison HES510 Specifications HES810 Driven System Xpeed 5 AIR LINE KIT HES510 5,000 ~ 50,000 HES Series HES510 HES810 Speed {min-1(rpm)} Max. Output Power 340W Available Chuck Size Max. ø1/4" Electric System (Brushless Motor) HES810 20,000 ~ 80,000 6 350W Max. ø4.0 mm Shank BT30 / 40 / 50 NT30 / 40 / 50 (M) CAT40 / 50, IT40 / 50 ST32, R8 HSK A63 / A100 BT30 / 40 / 50 NT40 CAT40 HSK A63, ST32 PARTS 7 HTS Series TECHNICAL DATA Air System (Air Turbine) 150,000 (71PSI) 25W Max. ø4.0 mm 8 APPLICATION EXAMPLES INDEX 4-p2 HPS Series Air System (Air Motor) HPS250 25,000 (73PSI) 77W (73PSI) HPS500 50,000 (73PSI) 51W (73PSI) Straight ø20 mm BT30 / 40 / 50 HSK E25 / 32 / 40 / 50 HSK A63, HSK F63 NE211 NE211 • Speed ................................................................... 5,000-50,000 min-1(rpm) • Max. Output Power .......................................................................... 340W • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHK-3.175) ........................................................ ø1/8" • HTS Torque & Output Power Characteristic of HES510 < Optional > • Air Line Kit (AL-C1204) .............................................. For Control Unit NE211 • Collet (CHK-[][]) ............................................................ ø0.5 mm-ø6.35 mm (See Page 6-p3 for details) • Motor Cord (EMCD-810-[][]) .......... Length 13 ft (9248) / 19 ft (9249) / 26 ft (9250) Provided with Air Cooling Hose ø4 mm 450 Torque 8 350 6 300 5 250 Output 4 200 3 150 2 BT30 CAT40 AIR LINE KIT 6 PARTS 100 Continuous Duty Area 50 0 Motor Cord is sold separately. 5 400 7 1 Note : HPS Xpeed 9 0 10 20 Speed { x 30 103 min-1(rpm) 40 50 } 7 TECHNICAL DATA 8 APPLICATION EXAMPLES HES510 Connection Drawing Max. ø1/4" Max. ø4.0 mm Notes Output (W) HPS Series . HTS Torque (cN m) HES810 SHEENUS neo SONIC CUTTER 2 The control unit is compact and lightweight. It features a protection circuit to stop the motor automatically in case of overload ensuring safe and smooth operation. The system incorporates an emergency, breakaway connector to help prevent system damage in case the machine's main spindle is rotated accidentally. 3 IMPULSE PRESTO II • Large Variety of Tapers Available • Protection Circuit • Emergency Connector E4000 ROTUS (Proper air pressure 28-42PSI) (Use Air Line Kit AL-C1204) BT, NT, CAT, IT, ST32, R8 and HSK A tapers are available. The spindle uses a double pair of ceramic bearings in the front and in the rear. This arrangement maximizes both radial and axial rigidity to insure extremely high-precision cutting. The motor also uses ceramic bearings to maximize life expectancy. 2 E2530 / E2550 1 HES510 Features ULTRA-HIGH SPEED AIR TURBINE MILLING SPINDLE ROTUS Electric System The HES510 motor and spindle require dry, clean, regulated air. Please refer to the drawing to the right for proper components. Air Line Kit AL-C1204 supplies clean dry air to the control unit through the filter and the regulator. INDEX Compressor Air Line Kit AL-C1204 (Refer to 4-p9 in detail) Control Unit NE211 (Refer to 4-p8 in detail) HES 510 4-p3 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p4 “HES510” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE COOLANT HES Series can be used in conjunction with water or oil based coolants. ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Motor Cord Motor Cord Emergency Connector Emergency Connector COOLANT 7.87" 1 Note : Motor Cord is sold separately. 7.87" *All HES Series Spindles incorporate an emergency connector Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector EmaxEVO IMPULSE PRESTO II HES510-BT30 / NT30 (M) 30 (0.69") (0.69") 8.40" (2.69") 6.48" (3.74") (3.72") (2.76") ROTUS IMPULSE PRESTO II (0.69") 60 60 (0.69") 10.31" ø63 mm ø15.9 mm ø40 mm ø29.6 mm (2.76") NT30 11.29" (4.01") 6.30" BT30 ESPERT 50 9.17" (1.91") 6.50" (2.76") SHEENUS neo SONIC CUTTER 2 HES510-BT50 / NT50 (M) / CAT50 / IT50 (2.76") 60 SHEENUS neo SONIC CUTTER (4.98") 6.31" (3.54") ø63 mm ROTUS ø40 mm ø29.6 mm ø15.9 mm ESPERT (3.55") 60 BT50 2 NT50 ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose E2530 / E2550 HES510-BT30 Motor Cord ø0.897" HES510-NT30 (M) Motor Cord ø40 mm ø29.6 mm ø15.9 mm ø1.0"/ø0.98" ø100 mm E2530 / E2550 ø100 mm iSpeed3 ø40 mm ø29.6 mm ø15.9 mm iSpeed3 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 1943 1944 1945 Standard Equipment · Accessories Model CAT. No. ø4 mm Air Cooling Hose Price Weight ø4 mm Air Cooling Hose Motor Cord E3000 - Modular Motor Cord HES510-BT30 HES510-BT50 HES510-NT30 • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. ø1.18" HES510-NT50 (M) ø1.0"/ø0.98" ø0.897" 4.85 lb. HES510-NT30M (0.69") (0.69") 10.31" (2.76") (4.01") 6.31" (2.76") (3.55") E3000 - 80,000rpm 10.31" (4.00") 6.31" *NT30M — Retention knob threads are metric. E4000 (3.55") 3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 (2.76") (3.15") ø4 mm Air Cooling Hose HES510 HES510-BT40 HES510-NT40 (M) Motor Cord HPS (0.69") 9.39" Xpeed 5 9.39" (2.69") 6.70" (2.76") (0.69") (3.94") (2.76") 60 AIR LINE KIT (2.69") 6.70" (3.94") ø97.5 mm Weight Price 11.02 lb. HES810 HES510-NT50 11.90 lb. HTS 11.90 lb. HPS HES510-CAT50 11.02 lb. Xpeed HES510-IT50 11.02 lb. HES510-NT50M • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. ø40 mm ø29.6 mm ø15.9 mm ø63.6 mm 6 PARTS 7 ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose HES510-CAT40 Motor Cord Motor Cord TECHNICAL DATA HES510-IT40 8 INDEX 5 AIR LINE KIT 7 TECHNICAL DATA APPLICATION EXAMPLES HES510 HES510-BT50 IT40 ø63.5 mm ø15.9 mm ø40 mm ø29.6 mm PARTS 4 Standard Equipment · Accessories Model *NT50M — Retention knob threads are metric. 60 CAT40 6 HES510-IT50 HES500-CAT50 1951 1952 1953 1954 1955 ø4 mm Air Cooling Hose Motor Cord HES510-CAT50 CAT. No. Motor Cord ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø4 mm Air Cooling Hose Motor Cord NT40 BT40 HTS ø1.0" ø0.98" MS 60 ø4 mm Air Cooling Hose MA (3.13") 60 HES810 IT50 ø40 mm ø29.6 mm ø15.9 mm (3.67") 5.89" (2.76") ø98.4 mm 9.56" (2.57") 5.91" ø40 mm ø29.6 mm ø15.9 mm (0.69") 8.48" ø63 mm MS 40 (0.69") 60 CAT50 ø0.897" ø40 mm ø29.6 mm ø15.9 mm ø1.18" ø63 mm ø1.0" ø0.98" 60 HES510-BT40 / NT40 (M) / CAT40 / IT40 ø40 mm ø29.6 mm ø15.9 mm ø0.897" ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece 3 MA E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular 1 EmaxEVO 8 CAT. No. 1946 1947 1948 1949 1950 Standard Equipment · Accessories Model Weight HES510-BT40 5.07 lb. HES510-NT40 5.29 lb. HES510-NT40M • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. 5.29 lb. HES510-CAT40 5.07 lb. HES510-IT40 5.07 lb. Price APPLICATION EXAMPLES Caution • INDEX If the machine's main spindle is rotated by mistake, the Emergency Connector on the motor is designed to separate. In order for the Emergency Connector to function as designed it must be set and positioned correctly. Please refer to the owner's manual for proper installation and check the integrity of the Emergency Connector and suspension prior to each use. *NT40M — Retention knob threads are metric. 4-p4 *For dimensions of taper shanks, please see page 4-p30, 31. * Order by catalog number. 4-p5 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p4 “HES510” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE COOLANT HES Series can be used in conjunction with water or oil based coolants. ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Motor Cord Motor Cord Emergency Connector Emergency Connector COOLANT 7.87" 1 Note : Motor Cord is sold separately. 7.87" *All HES Series Spindles incorporate an emergency connector Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector EmaxEVO IMPULSE PRESTO II HES510-BT30 / NT30 (M) 30 (0.69") (0.69") 8.40" (2.69") 6.48" (3.74") (3.72") (2.76") ROTUS IMPULSE PRESTO II (0.69") 60 60 (0.69") 10.31" ø63 mm ø15.9 mm ø40 mm ø29.6 mm (2.76") NT30 11.29" (4.01") 6.30" BT30 ESPERT 50 9.17" (1.91") 6.50" (2.76") SHEENUS neo SONIC CUTTER 2 HES510-BT50 / NT50 (M) / CAT50 / IT50 (2.76") 60 SHEENUS neo SONIC CUTTER (4.98") 6.31" (3.54") ø63 mm ROTUS ø40 mm ø29.6 mm ø15.9 mm ESPERT (3.55") 60 BT50 2 NT50 ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose E2530 / E2550 HES510-BT30 Motor Cord ø0.897" HES510-NT30 (M) Motor Cord ø40 mm ø29.6 mm ø15.9 mm ø1.0"/ø0.98" ø100 mm E2530 / E2550 ø100 mm iSpeed3 ø40 mm ø29.6 mm ø15.9 mm iSpeed3 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 1943 1944 1945 Standard Equipment · Accessories Model CAT. No. ø4 mm Air Cooling Hose Price Weight ø4 mm Air Cooling Hose Motor Cord E3000 - Modular Motor Cord HES510-BT30 HES510-BT50 HES510-NT30 • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. ø1.18" HES510-NT50 (M) ø1.0"/ø0.98" ø0.897" 4.85 lb. HES510-NT30M (0.69") (0.69") 10.31" (2.76") (4.01") 6.31" (2.76") (3.55") E3000 - 80,000rpm 10.31" (4.00") 6.31" *NT30M — Retention knob threads are metric. E4000 (3.55") 3 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 (2.76") (3.15") ø4 mm Air Cooling Hose HES510 HES510-BT40 HES510-NT40 (M) Motor Cord HPS (0.69") 9.39" Xpeed 5 9.39" (2.69") 6.70" (2.76") (0.69") (3.94") (2.76") 60 AIR LINE KIT (2.69") 6.70" (3.94") ø97.5 mm Weight Price 11.02 lb. HES810 HES510-NT50 11.90 lb. HTS 11.90 lb. HPS HES510-CAT50 11.02 lb. Xpeed HES510-IT50 11.02 lb. HES510-NT50M • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. ø40 mm ø29.6 mm ø15.9 mm ø63.6 mm 6 PARTS 7 ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose HES510-CAT40 Motor Cord Motor Cord TECHNICAL DATA HES510-IT40 8 INDEX 5 AIR LINE KIT 7 TECHNICAL DATA APPLICATION EXAMPLES HES510 HES510-BT50 IT40 ø63.5 mm ø15.9 mm ø40 mm ø29.6 mm PARTS 4 Standard Equipment · Accessories Model *NT50M — Retention knob threads are metric. 60 CAT40 6 HES510-IT50 HES500-CAT50 1951 1952 1953 1954 1955 ø4 mm Air Cooling Hose Motor Cord HES510-CAT50 CAT. No. Motor Cord ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø4 mm Air Cooling Hose Motor Cord NT40 BT40 HTS ø1.0" ø0.98" MS 60 ø4 mm Air Cooling Hose MA (3.13") 60 HES810 IT50 ø40 mm ø29.6 mm ø15.9 mm (3.67") 5.89" (2.76") ø98.4 mm 9.56" (2.57") 5.91" ø40 mm ø29.6 mm ø15.9 mm (0.69") 8.48" ø63 mm MS 40 (0.69") 60 CAT50 ø0.897" ø40 mm ø29.6 mm ø15.9 mm ø1.18" ø63 mm ø1.0" ø0.98" 60 HES510-BT40 / NT40 (M) / CAT40 / IT40 ø40 mm ø29.6 mm ø15.9 mm ø0.897" ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece 3 MA E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular 1 EmaxEVO 8 CAT. No. 1946 1947 1948 1949 1950 Standard Equipment · Accessories Model Weight HES510-BT40 5.07 lb. HES510-NT40 5.29 lb. HES510-NT40M • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. 5.29 lb. HES510-CAT40 5.07 lb. HES510-IT40 5.07 lb. Price APPLICATION EXAMPLES Caution • INDEX If the machine's main spindle is rotated by mistake, the Emergency Connector on the motor is designed to separate. In order for the Emergency Connector to function as designed it must be set and positioned correctly. Please refer to the owner's manual for proper installation and check the integrity of the Emergency Connector and suspension prior to each use. *NT40M — Retention knob threads are metric. 4-p4 *For dimensions of taper shanks, please see page 4-p30, 31. * Order by catalog number. 4-p5 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p6 “HES510” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Motor Cord Motor Cord Emergency Connector COOLANT Emergency Connector COOLANT 7.87" 1 Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector 7.87" Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector EmaxEVO PRESTO II HES510-HSK A63 ST32 (0.69") (2.76") (3.66") SHEENUS neo SONIC CUTTER 2.36" IMPULSE 8.62" 7.36" (2.76") (1.26") PRESTO II HSK A63 SHEENUS neo SONIC CUTTER (4.60") 60 0.87" 45 ø32 mm ø40 mm ø29.6 mm ø15.9 mm iSpeed3 (0.69") 1.50" M8x1.25 60 depth 6 2 ROTUS HSK A63 (8.78") ESPERT 2 ø63 mm IMPULSE HES510-ST32 ø40 mm ø29.6 mm ø15.9 mm ROTUS ø63 mm ESPERT 1 EmaxEVO iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø4 mm Air Cooling Hose E3000 - One Piece ø0.897" ø4 mm Air Cooling Hose HES510-ST32 Motor Cord E3000 - One Piece HES510-HSK A63 Motor Cord E3000 - Modular E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm ø1.18" CAT. No. 9197 Standard Equipment · Accessories Model HES510-ST32 Weight • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Price 5.29 lb. CAT. No. Model 1956 HES510-HSK A63 Standard Equipment · Accessories Weight • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Price ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 5.95 lb. E4000 E4000 3 3 MA ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510-R8 HES510-HSK A100 R8 (0.69") HSK A100 (10.55") (2.76") (3.79") (4.00") ø0.897" ø1.0" ø0.98" ø1.18" (0.69") MS 9.72" (2.76") (5.00") 1.63" M8x1.25 60 depth 6 HSK A100 60 1.00" R8 HES510 HES810 4 ø63 mm ø40 mm ø29.6 mm ø15.9 mm 4 45 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" (1.97") 7.76" ø100 mm ø1.0" ø0.98" MA ø40 mm ø29.6 mm ø15.9 mm ø0.897" HES510 HES810 HTS HTS HPS Motor Cord 5 HPS ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Xpeed Motor Cord HES510-R8 Xpeed HES510-HSK A100 5 S AIR LINE KIT AIR LINE KIT CAT. No. 6 PARTS 9196 Model HES510-R8 Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Weight 5.29 lb. Price CAT. No. Model 1957 HES510-HSK A100 Standard Equipment · Accessories Weight • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Price 9.70 lb. 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX 4-p6 Caution • INDEX If the machine's main spindle is rotated by mistake, the Emergency Connector on the motor is designed to separate. In order for the Emergency Connector to function as designed it must be set and positioned correctly. Please refer to the owner's manual for proper installation and check the integrity of the Emergency Connector and suspension prior to each use. *For dimensions of taper shanks, please see page 4-p31, 32. * Order by catalog number. 4-p7 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p6 “HES510” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Motor Cord Motor Cord Emergency Connector COOLANT Emergency Connector COOLANT 7.87" 1 Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector 7.87" Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector EmaxEVO PRESTO II HES510-HSK A63 ST32 (0.69") (2.76") (3.66") SHEENUS neo SONIC CUTTER 2.36" IMPULSE 8.62" 7.36" (2.76") (1.26") PRESTO II HSK A63 SHEENUS neo SONIC CUTTER (4.60") 60 0.87" 45 ø32 mm ø40 mm ø29.6 mm ø15.9 mm iSpeed3 (0.69") 1.50" M8x1.25 60 depth 6 2 ROTUS HSK A63 (8.78") ESPERT 2 ø63 mm IMPULSE HES510-ST32 ø40 mm ø29.6 mm ø15.9 mm ROTUS ø63 mm ESPERT 1 EmaxEVO iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø4 mm Air Cooling Hose E3000 - One Piece ø0.897" ø4 mm Air Cooling Hose HES510-ST32 Motor Cord E3000 - One Piece HES510-HSK A63 Motor Cord E3000 - Modular E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm ø1.18" CAT. No. 9197 Standard Equipment · Accessories Model HES510-ST32 Weight • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Price 5.29 lb. CAT. No. Model 1956 HES510-HSK A63 Standard Equipment · Accessories Weight • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Price ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 5.95 lb. E4000 E4000 3 3 MA ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510-R8 HES510-HSK A100 R8 (0.69") HSK A100 (10.55") (2.76") (3.79") (4.00") ø0.897" ø1.0" ø0.98" ø1.18" (0.69") MS 9.72" (2.76") (5.00") 1.63" M8x1.25 60 depth 6 HSK A100 60 1.00" R8 HES510 HES810 4 ø63 mm ø40 mm ø29.6 mm ø15.9 mm 4 45 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" (1.97") 7.76" ø100 mm ø1.0" ø0.98" MA ø40 mm ø29.6 mm ø15.9 mm ø0.897" HES510 HES810 HTS HTS HPS Motor Cord 5 HPS ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Xpeed Motor Cord HES510-R8 Xpeed HES510-HSK A100 5 S AIR LINE KIT AIR LINE KIT CAT. No. 6 PARTS 9196 Model HES510-R8 Standard Equipment · Accessories • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Weight 5.29 lb. Price CAT. No. Model 1957 HES510-HSK A100 Standard Equipment · Accessories Weight • Collet ø1/8" (CHK-3.175) : 1 pc. • Collet Nut (K-265) : 1 pc. • Wrench (12 x 14) : 2 pcs. Price 9.70 lb. 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX 4-p6 Caution • INDEX If the machine's main spindle is rotated by mistake, the Emergency Connector on the motor is designed to separate. In order for the Emergency Connector to function as designed it must be set and positioned correctly. Please refer to the owner's manual for proper installation and check the integrity of the Emergency Connector and suspension prior to each use. *For dimensions of taper shanks, please see page 4-p31, 32. * Order by catalog number. 4-p7 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p8 “HES510” CONTROL UNIT “HES510” AIR LINE KIT & MOTOR CORD for international operation • AC100-240V 1,000~50,000 min (rpm) • Maximum Output 350W • -1 CONTROL UNIT NE211 3.46" ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 50,000 min-1(rpm) E2530 / E2550 4504 [1] Load Meter* * : Load Meter [2] Running LED (RUN) •••••• 1 AIR LINE KIT AL-C1204 9.06" 7.48" 0.79" 0.79" [3] Warning LED (WARNING) LOAD EmaxEVO The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts of debris while the adjustable regulator provides the correct air pressure for cooling and purging. [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload [6] Gear Setting Switch (GEAR) [8] Rotating Direction Selector Switch (FWD./REV.) [9] Start Switch (START) [10] Motor Speed Adjustment Switch (SPEED) External Input-Output Connector A (D-SUB25 Female) ø6 mm Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) [11] Display 2-ø7mm CAT. No. Model ø1.0"/ø0.98" E3000 - Modular [1] Motor Connector ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 4504 AL-C1204 1.18" E3000 - One Piece External Input-Output Connector B (D-SUB15 Female) [2] [10] [3] [11] 4.7 2" ø0.897" 9.37" E2530 / E2550 Standard Equipment · Accessories Price MA ø0.897" E3000 - One Piece E3000 - Modular ø1.18" MOTOR CORD Air Input Joint ø6 mm Product ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 [5] [6] Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions Communication Connector MS HES510 [7] [8] [9] Power Switch ø1.0" ø0.98" 4 Inlet with Power Fuse : NE211 : AC120V : 1,000-50,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" E3000 Control Unit CAT. No. Plug Type Model Price Standard Equipment · Accessories CAT. No. Description · Model Length 9248 Motor Cord 4M EMCD-810-4M 13 ft 9249 Motor Cord 6M EMCD-810-6M 19 ft Motor Cord 8M EMCD-810-8M 26 ft 9250 HPS 9775 120V (B type) NE211 AIR LINE KIT 6 PARTS *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type and order accordingly. • Power Source Plug Plug Type 7 TECHNICAL DATA For 100V (A type) 8 APPLICATION EXAMPLES For 120V (B type) INDEX 4-p8 Main Usable Area For Japan For U.S.A. and Canada Price 3 MA ø0.897" • Air Cooling Hose : ø4 mm • Reducer • Plug Cap ø1.0" ø0.98" HES510 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Control Panel Extension Cord • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. Xpeed 5 Fit to Standard Equipment · Accessories CONTROL PANEL EXTENSION CORD HES810 HTS iSpeed3 ø1.0"/ø0.98" 4-ø7mm Air Output Joint ø6 mm Specifications ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 2 E2530 / E2550 [4] ø0.897" ø1.18" IMPULSE E2530 / E2550 • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft E4000 3 ROTUS SHEENUS neo SONIC CUTTER PF1/4 [7] Control Switch (AUTO/MANUAL) ESPERT PRESTO II R3.5mm ø15mm [5] Error Reset Switch (RESET) 2 iSpeed3 CAT. No. 0.79" 9775 CAT. No. 8.66" 6.69" 1 EmaxEVO CAT. No. Model For use with 8407 E3000PEX-4 NE211 Price HTS HPS Xpeed 5 Interface Cable Page 4-p13 AIR LINE KIT 6 HES Purchasing Example PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug For Europe Product HES Purchasing Example Description CAT. No. Model Spindle with CAT40 Control Unit 13 ft Motor Cord Air Line Kit 1949 9775 9248 4504 HES510-CAT40 NE211 EMCD-810-4M AL-C1204 Total Price 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 4-p9 4-p0-9_HES510_A_1407.qxd 14.8.2 7:58 PM ページ 4-p8 “HES510” CONTROL UNIT “HES510” AIR LINE KIT & MOTOR CORD for international operation • AC100-240V 1,000~50,000 min (rpm) • Maximum Output 350W • -1 CONTROL UNIT NE211 3.46" ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 50,000 min-1(rpm) E2530 / E2550 4504 [1] Load Meter* * : Load Meter [2] Running LED (RUN) •••••• 1 AIR LINE KIT AL-C1204 9.06" 7.48" 0.79" 0.79" [3] Warning LED (WARNING) LOAD EmaxEVO The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts of debris while the adjustable regulator provides the correct air pressure for cooling and purging. [4] Error LED (ERROR) load area • :: Continuous load area • : Intermittent • Overload [6] Gear Setting Switch (GEAR) [8] Rotating Direction Selector Switch (FWD./REV.) [9] Start Switch (START) [10] Motor Speed Adjustment Switch (SPEED) External Input-Output Connector A (D-SUB25 Female) ø6 mm Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) [11] Display 2-ø7mm CAT. No. Model ø1.0"/ø0.98" E3000 - Modular [1] Motor Connector ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 4504 AL-C1204 1.18" E3000 - One Piece External Input-Output Connector B (D-SUB15 Female) [2] [10] [3] [11] 4.7 2" ø0.897" 9.37" E2530 / E2550 Standard Equipment · Accessories Price MA ø0.897" E3000 - One Piece E3000 - Modular ø1.18" MOTOR CORD Air Input Joint ø6 mm Product ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 [5] [6] Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions Communication Connector MS HES510 [7] [8] [9] Power Switch ø1.0" ø0.98" 4 Inlet with Power Fuse : NE211 : AC120V : 1,000-50,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" E3000 Control Unit CAT. No. Plug Type Model Price Standard Equipment · Accessories CAT. No. Description · Model Length 9248 Motor Cord 4M EMCD-810-4M 13 ft 9249 Motor Cord 6M EMCD-810-6M 19 ft Motor Cord 8M EMCD-810-8M 26 ft 9250 HPS 9775 120V (B type) NE211 AIR LINE KIT 6 PARTS *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type and order accordingly. • Power Source Plug Plug Type 7 TECHNICAL DATA For 100V (A type) 8 APPLICATION EXAMPLES For 120V (B type) INDEX 4-p8 Main Usable Area For Japan For U.S.A. and Canada Price 3 MA ø0.897" • Air Cooling Hose : ø4 mm • Reducer • Plug Cap ø1.0" ø0.98" HES510 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Control Panel Extension Cord • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. Xpeed 5 Fit to Standard Equipment · Accessories CONTROL PANEL EXTENSION CORD HES810 HTS iSpeed3 ø1.0"/ø0.98" 4-ø7mm Air Output Joint ø6 mm Specifications ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 2 E2530 / E2550 [4] ø0.897" ø1.18" IMPULSE E2530 / E2550 • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft E4000 3 ROTUS SHEENUS neo SONIC CUTTER PF1/4 [7] Control Switch (AUTO/MANUAL) ESPERT PRESTO II R3.5mm ø15mm [5] Error Reset Switch (RESET) 2 iSpeed3 CAT. No. 0.79" 9775 CAT. No. 8.66" 6.69" 1 EmaxEVO CAT. No. Model For use with 8407 E3000PEX-4 NE211 Price HTS HPS Xpeed 5 Interface Cable Page 4-p13 AIR LINE KIT 6 HES Purchasing Example PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug For Europe Product HES Purchasing Example Description CAT. No. Model Spindle with CAT40 Control Unit 13 ft Motor Cord Air Line Kit 1949 9775 9248 4504 HES510-CAT40 NE211 EMCD-810-4M AL-C1204 Total Price 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 4-p9 4-p10-15_HES810_A_1407.qxd 14.8.2 10:29 PM ページ 4-p10 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE HES810 • 1 The HES810 motor is a brushless DC motor that utilizes hall elements and rare-earth magnets to achieve max. output 350W in a very compact size. • Ceramic Bearings ø1.0"/ø0.98" ø0.897" 3 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" E2530 / E2550 Motor Cord • One-Piece motor and spindle construction 6 PARTS The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines. Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES810-BT30 ø1.0"/ø0.98" ø0.897" 4.41 lb. E3000 - 80,000rpm E4000 The system incorporates an emergency, breakaway connector to help prevent system damage in case the machine's main spindle is rotated accidentally. • 3 HES810-BT40 / NT40 / CAT40 Excellent Durability by air-cooling system 40 Air-cooling motor uses a small volume of air (0.53 CFM) to prevent heat buildup and allow long, continuous operation. • Best for small diameter drilling and milling MA ø0.897" (7.90") (0.58") (5.33") (2.18") (0.58") (5.31") 2.57" (2.18") (3.15") ø1.18" 3.68" MS (3.13") 60 Less than ø0.08"(ø2 mm) small diameter drilling and milling with extremely good surface finishes, using a high-speed brushless motor. ø1.0" ø0.98" (8.99") 60 BT40 NT40 • Speed ................................................................. 20,000-80,000 min-1(rpm) • Ideal Operating Speed ............................................ 50,000-80,000 min-1(rpm) • Max. Output Power ......................................................................... 350W • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHA-3.175) ........................................................ ø1/8" < Optional > • Air Line Kit (AL-C1204) .............................................. For Control Unit NE211 • Collet (CHA-[][]) .............................................................. ø0.5 mm-ø4.0 mm ø4 mm Air Cooling Hose • Torque & Output Power Characteristic of HES810 INDEX 4-p10 4 350 7 300 6 250 5 200 Torque 4 150 3 100 2 Continuous Duty Area 1 Xpeed 2.69" (3.94") (2.18") 5 60 AIR LINE KIT CAT40 6 PARTS 50 0 7 0 20 Motor Cord is sold separately. HTS Motor Cord (8.81") (6.12") Output HES810 HES810-NT40 HPS (0.58") 8 ø4 mm Air Cooling Hose HES810-BT40 Motor Cord 400 9 (See Page 6-p2 for details) • Motor Cord (EMCD-810-[][]) .......... Length 13 ft (9248) / 19 ft (9249) / 26 ft (9250) Provided with Air Cooling Hose ø4 mm Note : ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HES810 Specifications 30 40 50 60 70 80 ø4 mm Air Cooling Hose Speed { x 103 min-1(rpm) } Motor Cord TECHNICAL DATA HES810-CAT40 8 APPLICATION EXAMPLES E3000 - Modular Price • Emergency Connector 7 TECHNICAL DATA ø0.897" ø1.18" 7611 ø40 mm ø29.6 mm ø11.8 mm AIR LINE KIT E2530 / E2550 Standard Equipment · Accessories Model CAT. No. Output (W) 5 ø1.0"/ø0.98" HES810-BT30 E3000 - One Piece . Xpeed 2 iSpeed3 ø4 mm Air Cooling Hose Torque (cN m) HPS ø63 mm The control unit is compact and lightweight. It features a protection circuit to stop the motor automatically in case of overload ensuring safe and smooth operation. HES810 HTS SHEENUS neo SONIC CUTTER BT30 4 HES510 PRESTO II 60 ø40 mm ø29.6 mm ø11.8 mm ø1.0" ø0.98" (3.74") Large Variety of Tapers Available The absence of a commutator and the use of a photo coupler sending a feedback signal of 48 pulses per revolution result in very smooth rotation with low vibration throughout the speed range. MA ø0.897" IMPULSE 1.91" (5.92") (2.18") • Smooth Rotation E3000 - 80,000rpm E4000 • • Protection Circuit 30 (7.83") ø63 mm ø1.18" (Proper air pressure 28-42PSI) (Use Air Line Kit AL-C1204) ROTUS (0.58") BT, NT, CAT, ST32 and HSK A tapers are available. The spindle uses a double pair of ceramic bearings in the front and in the rear. This arrangement maximizes both radial and axial rigidity to insure extremely high-precision cutting. The motor also uses ceramic bearings to maximize life expectancy. E3000 - One Piece E3000 - Modular Clean dry air is required to cool the motor and protect the spindle from contaminants. Please use a filter and regulator. ø40 mm ø29.6 mm ø11.8 mm ø0.897" 1 ESPERT ø63.5 mm E2530 / E2550 *All HES Series Spindles incorporate an emergency connector HES810-BT30 • Cooling Air -1 iSpeed3 ø1.0"/ø0.98" 7.87" Note : Motor Cord is sold separately. EmaxEVO • 20,000-80,000 min (rpm) • Maximum Output 350W 2 E2530 / E2550 Motor Cord Emergency Connector HES810 Features PRESTO II SHEENUS neo SONIC CUTTER ø4 mm Air Cooling Hose ø63 mm IMPULSE COOLANT HES Series can be used in conjunction with water or oil based coolants. ø40 mm ø29.6mm ø11.8 mm ROTUS The Ultra-Precision, High-Speed HES810 spindles allow you to use your existing equipment for a much larger variety of operations. Conventional milling machines and machining centers can now do high-speed machining, small diameter drilling and milling with extremely good surface finishes with the HES810. Max. Output 350W • EmaxEVO ESPERT Electric System 8 CAT. No. HES810 Connection Drawing The HES810 motor and spindle require dry, clean, regulated air. Please refer to the drawing to the right for proper components. Air Line Kit AL-C1204 supplies clean dry air to the control unit through the filter and the regulator. 7612 7613 9201 Compressor Air Line Kit AL-C1204 (Refer to 4-p15 in detail) Control Unit NE211 (Refer to 4-p14 in detail) Model Standard Equipment · Accessories Price APPLICATION EXAMPLES 4.85 lb. HES810-BT40 HES810-NT40 Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES810-CAT40 5.07 lb. INDEX 5.28 lb. HES810 *For dimensions of taper shanks, please see page 4-p30. * Order by catalog number. 4-p11 4-p10-15_HES810_A_1407.qxd 14.8.2 10:29 PM ページ 4-p10 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE HES810 • 1 The HES810 motor is a brushless DC motor that utilizes hall elements and rare-earth magnets to achieve max. output 350W in a very compact size. • Ceramic Bearings ø1.0"/ø0.98" ø0.897" 3 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" E2530 / E2550 Motor Cord • One-Piece motor and spindle construction 6 PARTS The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines. Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES810-BT30 ø1.0"/ø0.98" ø0.897" 4.41 lb. E3000 - 80,000rpm E4000 The system incorporates an emergency, breakaway connector to help prevent system damage in case the machine's main spindle is rotated accidentally. • 3 HES810-BT40 / NT40 / CAT40 Excellent Durability by air-cooling system 40 Air-cooling motor uses a small volume of air (0.53 CFM) to prevent heat buildup and allow long, continuous operation. • Best for small diameter drilling and milling MA ø0.897" (7.90") (0.58") (5.33") (2.18") (0.58") (5.31") 2.57" (2.18") (3.15") ø1.18" 3.68" MS (3.13") 60 Less than ø0.08"(ø2 mm) small diameter drilling and milling with extremely good surface finishes, using a high-speed brushless motor. ø1.0" ø0.98" (8.99") 60 BT40 NT40 • Speed ................................................................. 20,000-80,000 min-1(rpm) • Ideal Operating Speed ............................................ 50,000-80,000 min-1(rpm) • Max. Output Power ......................................................................... 350W • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHA-3.175) ........................................................ ø1/8" < Optional > • Air Line Kit (AL-C1204) .............................................. For Control Unit NE211 • Collet (CHA-[][]) .............................................................. ø0.5 mm-ø4.0 mm ø4 mm Air Cooling Hose • Torque & Output Power Characteristic of HES810 INDEX 4-p10 4 350 7 300 6 250 5 200 Torque 4 150 3 100 2 Continuous Duty Area 1 Xpeed 2.69" (3.94") (2.18") 5 60 AIR LINE KIT CAT40 6 PARTS 50 0 7 0 20 Motor Cord is sold separately. HTS Motor Cord (8.81") (6.12") Output HES810 HES810-NT40 HPS (0.58") 8 ø4 mm Air Cooling Hose HES810-BT40 Motor Cord 400 9 (See Page 6-p2 for details) • Motor Cord (EMCD-810-[][]) .......... Length 13 ft (9248) / 19 ft (9249) / 26 ft (9250) Provided with Air Cooling Hose ø4 mm Note : ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HES810 Specifications 30 40 50 60 70 80 ø4 mm Air Cooling Hose Speed { x 103 min-1(rpm) } Motor Cord TECHNICAL DATA HES810-CAT40 8 APPLICATION EXAMPLES E3000 - Modular Price • Emergency Connector 7 TECHNICAL DATA ø0.897" ø1.18" 7611 ø40 mm ø29.6 mm ø11.8 mm AIR LINE KIT E2530 / E2550 Standard Equipment · Accessories Model CAT. No. Output (W) 5 ø1.0"/ø0.98" HES810-BT30 E3000 - One Piece . Xpeed 2 iSpeed3 ø4 mm Air Cooling Hose Torque (cN m) HPS ø63 mm The control unit is compact and lightweight. It features a protection circuit to stop the motor automatically in case of overload ensuring safe and smooth operation. HES810 HTS SHEENUS neo SONIC CUTTER BT30 4 HES510 PRESTO II 60 ø40 mm ø29.6 mm ø11.8 mm ø1.0" ø0.98" (3.74") Large Variety of Tapers Available The absence of a commutator and the use of a photo coupler sending a feedback signal of 48 pulses per revolution result in very smooth rotation with low vibration throughout the speed range. MA ø0.897" IMPULSE 1.91" (5.92") (2.18") • Smooth Rotation E3000 - 80,000rpm E4000 • • Protection Circuit 30 (7.83") ø63 mm ø1.18" (Proper air pressure 28-42PSI) (Use Air Line Kit AL-C1204) ROTUS (0.58") BT, NT, CAT, ST32 and HSK A tapers are available. The spindle uses a double pair of ceramic bearings in the front and in the rear. This arrangement maximizes both radial and axial rigidity to insure extremely high-precision cutting. The motor also uses ceramic bearings to maximize life expectancy. E3000 - One Piece E3000 - Modular Clean dry air is required to cool the motor and protect the spindle from contaminants. Please use a filter and regulator. ø40 mm ø29.6 mm ø11.8 mm ø0.897" 1 ESPERT ø63.5 mm E2530 / E2550 *All HES Series Spindles incorporate an emergency connector HES810-BT30 • Cooling Air -1 iSpeed3 ø1.0"/ø0.98" 7.87" Note : Motor Cord is sold separately. EmaxEVO • 20,000-80,000 min (rpm) • Maximum Output 350W 2 E2530 / E2550 Motor Cord Emergency Connector HES810 Features PRESTO II SHEENUS neo SONIC CUTTER ø4 mm Air Cooling Hose ø63 mm IMPULSE COOLANT HES Series can be used in conjunction with water or oil based coolants. ø40 mm ø29.6mm ø11.8 mm ROTUS The Ultra-Precision, High-Speed HES810 spindles allow you to use your existing equipment for a much larger variety of operations. Conventional milling machines and machining centers can now do high-speed machining, small diameter drilling and milling with extremely good surface finishes with the HES810. Max. Output 350W • EmaxEVO ESPERT Electric System 8 CAT. No. HES810 Connection Drawing The HES810 motor and spindle require dry, clean, regulated air. Please refer to the drawing to the right for proper components. Air Line Kit AL-C1204 supplies clean dry air to the control unit through the filter and the regulator. 7612 7613 9201 Compressor Air Line Kit AL-C1204 (Refer to 4-p15 in detail) Control Unit NE211 (Refer to 4-p14 in detail) Model Standard Equipment · Accessories Price APPLICATION EXAMPLES 4.85 lb. HES810-BT40 HES810-NT40 Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each HES810-CAT40 5.07 lb. INDEX 5.28 lb. HES810 *For dimensions of taper shanks, please see page 4-p30. * Order by catalog number. 4-p11 4-p10-15_HES810_A_1407.qxd 14.8.2 10:29 PM ページ 4-p12 “HES810” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Motor Cord Motor Cord Emergency Connector COOLANT Emergency Connector COOLANT 7.87" 1 Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector 7.87" Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector EmaxEVO (5.72") (2.18") 4.01" (3.54") SHEENUS neo SONIC CUTTER 60 IMPULSE (8.20") (3.66") (2.18") M8x1.25 60 depth 6 ø100 mm iSpeed3 (0.58") BT50 ø40 mm ø29.6 mm ø11.8 mm 2 ROTUS ST32 (9.73") PRESTO II 2.36" 1.50" SHEENUS neo SONIC CUTTER 0.87" 45 2 ø63 mm 50 (0.58") ESPERT ø32 mm PRESTO II HES810-ST32 ø11.8 mm IMPULSE HES810-BT50 ø40 mm ROTUS ø29.6 mm ESPERT iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose ø0.897" E3000 - One Piece ø0.897" Motor Cord Motor Cord E3000 - One Piece HES810-ST32 HES810-BT50 E3000 - Modular E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 ø1.18" CAT. No. 7614 Standard Equipment · Accessories Model HES810-BT50 Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price 7616 10.80 lb. Standard Equipment · Accessories Model CAT. No. HES810-ST32 Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price E4000 3 MA ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA HES810-HSK A63 HSK A63 ø0.897" ø1.0" ø0.98" ø1.18" (0.58") (8.04") MS 1.26" (6.78") (2.18") ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" (4.60") 60 HSK A63 4 HES510 HES810 ø63 mm ø40 mm ø29.6 mm ø11.8 mm 4 HES510 HES810 HTS HTS HPS Caution ø4 mm Air Cooling Hose Motor Cord Xpeed HES810-HSK A63 • 5 AIR LINE KIT 6 PARTS 7 CAT. No. Model 7615 HES810-HSK A63 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Weight Price HPS Xpeed If the machine's main spindle is rotated by mistake, the Emergency Connector on the motor is designed to separate. In order for the Emergency Connector to function as designed it must be set and positioned correctly. Please refer to the owner's manual for proper installation and check the integrity of the Emergency Connector and suspension prior to each use. 5 AIR LINE KIT 6 5.73 lb. 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a TECHNICAL DATA 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. 8 APPLICATION EXAMPLES blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. INDEX 25 Pin Interface Cable CAT. No. PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 15 Pin Interface Cable Price Model DB25M DB25M 4-p12 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 5.07 lb. 3 ø0.897" 1 EmaxEVO For NSK Control Connector A CAT. No. DB15M DB15M *For dimensions of taper shanks, please see page 4-p31, 32. Price Model For NSK Control Connector B * Order by catalog number. 4-p13 4-p10-15_HES810_A_1407.qxd 14.8.2 10:29 PM ページ 4-p12 “HES810” ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose Motor Cord Motor Cord Emergency Connector COOLANT Emergency Connector COOLANT 7.87" 1 Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector 7.87" Note : Motor Cord is sold separately. *All HES Series Spindles incorporate an emergency connector EmaxEVO (5.72") (2.18") 4.01" (3.54") SHEENUS neo SONIC CUTTER 60 IMPULSE (8.20") (3.66") (2.18") M8x1.25 60 depth 6 ø100 mm iSpeed3 (0.58") BT50 ø40 mm ø29.6 mm ø11.8 mm 2 ROTUS ST32 (9.73") PRESTO II 2.36" 1.50" SHEENUS neo SONIC CUTTER 0.87" 45 2 ø63 mm 50 (0.58") ESPERT ø32 mm PRESTO II HES810-ST32 ø11.8 mm IMPULSE HES810-BT50 ø40 mm ROTUS ø29.6 mm ESPERT iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø4 mm Air Cooling Hose ø4 mm Air Cooling Hose ø0.897" E3000 - One Piece ø0.897" Motor Cord Motor Cord E3000 - One Piece HES810-ST32 HES810-BT50 E3000 - Modular E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 ø1.18" CAT. No. 7614 Standard Equipment · Accessories Model HES810-BT50 Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price 7616 10.80 lb. Standard Equipment · Accessories Model CAT. No. HES810-ST32 Weight • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Price E4000 3 MA ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA HES810-HSK A63 HSK A63 ø0.897" ø1.0" ø0.98" ø1.18" (0.58") (8.04") MS 1.26" (6.78") (2.18") ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" (4.60") 60 HSK A63 4 HES510 HES810 ø63 mm ø40 mm ø29.6 mm ø11.8 mm 4 HES510 HES810 HTS HTS HPS Caution ø4 mm Air Cooling Hose Motor Cord Xpeed HES810-HSK A63 • 5 AIR LINE KIT 6 PARTS 7 CAT. No. Model 7615 HES810-HSK A63 Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) : 1 pc. • Collet Nut (CHN-A) : 1 pc. • Wrench (8 x 5), (9 x 11) : 1 pc. each Weight Price HPS Xpeed If the machine's main spindle is rotated by mistake, the Emergency Connector on the motor is designed to separate. In order for the Emergency Connector to function as designed it must be set and positioned correctly. Please refer to the owner's manual for proper installation and check the integrity of the Emergency Connector and suspension prior to each use. 5 AIR LINE KIT 6 5.73 lb. 25 Pin INTERFACE CABLE 15 Pin INTERFACE CABLE 3 Meter long Interface Cable provides a •DB25 Male Connector at one end and a TECHNICAL DATA 3 Meter long Interface Cable provides a •DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. 8 APPLICATION EXAMPLES blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. INDEX 25 Pin Interface Cable CAT. No. PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 15 Pin Interface Cable Price Model DB25M DB25M 4-p12 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm 5.07 lb. 3 ø0.897" 1 EmaxEVO For NSK Control Connector A CAT. No. DB15M DB15M *For dimensions of taper shanks, please see page 4-p31, 32. Price Model For NSK Control Connector B * Order by catalog number. 4-p13 4-p10-15_HES810_A_1407.qxd 14.8.2 10:29 PM ページ 4-p14 “HES810” CONTROL UNIT “HES810” AIR LINE KIT & MOTOR CORD for international operation • AC100-240V 1,000~80,000 min (rpm) • Maximum Output 350W • -1 CONTROL UNIT NE211 ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 80,000 min-1(rpm) 3.46" E2530 / E2550 ø1.0"/ø0.98" 4504 * : Load Meter [2] Running LED (RUN) LOAD [3] Warning LED (WARNING) •••••• 9.06" 7.48" 0.79" 0.79" load area • :: Continuous load area • : Intermittent • Overload [6] Gear Setting Switch (GEAR) R3.5mm ø15mm [7] Control Switch (AUTO/MANUAL) PF1/4 [9] Start Switch (START) [10] Motor Speed Adjustment Switch (SPEED) Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) [11] Display 2-ø7mm 9.37" Motor Connector ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm [2] [10] [3] [11] CAT. No. Model 4504 AL-C1204 1.18" [1] External Input-Output Connector B (D-SUB15 Female) Standard Equipment · Accessories Price MA ø0.897" ø0.897" E3000 - One Piece E3000 - Modular 4-ø7mm ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Product Air Input Joint ø6 mm [5] [6] Power Switch 4 HES510 [7] [8] [9] Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions Communication Connector Inlet with Power Fuse : NE211 : AC120V : 1,000-80,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" E3000 Control Unit CAT. No. CAT. No. Description · Model Length 9248 Motor Cord 4M EMCD-810-4M 13 ft 9249 Motor Cord 6M EMCD-810-6M 19 ft Motor Cord 8M EMCD-810-8M 26 ft Specifications MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Plug Type Model Price Standard Equipment · Accessories 9250 HPS 9775 120V (B type) NE211 AIR LINE KIT 6 PARTS *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type and order accordingly. • Power Source Plug Plug Type 7 TECHNICAL DATA For 100V (A type) 8 APPLICATION EXAMPLES For 120V (B type) INDEX 4-p14 Main Usable Area For Japan For U.S.A. and Canada Price 3 MA ø0.897" • Air Cooling Hose : ø4 mm • Reducer • Plug Cap ø1.0" ø0.98" HES810 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Control Panel Extension Cord • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. Xpeed 5 Fit to Standard Equipment · Accessories CONTROL PANEL EXTENSION CORD HES810 HTS iSpeed3 ø1.0"/ø0.98" MOTOR CORD Air Output Joint ø6 mm 2 E2530 / E2550 [4] ø1.0" ø0.98" ø1.18" IMPULSE E2530 / E2550 • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft E4000 3 ROTUS SHEENUS neo SONIC CUTTER ø6 mm [8] Rotating Direction Selector Switch (FWD./REV.) External Input-Output Connector A (D-SUB25 Female) ESPERT PRESTO II [5] Error Reset Switch (RESET) E3000 - Modular ø1.18" of debris while the adjustable regulator provides the correct air pressure for cooling and purging. [4] Error LED (ERROR) 4.7 2" E3000 - One Piece EmaxEVO The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts E2530 / E2550 ø0.897" 1 AIR LINE KIT AL-C1204 [1] Load Meter* 2 iSpeed3 CAT. No. 0.79" 9775 CAT. No. 8.66" 6.69" 1 EmaxEVO CAT. No. Model For use with 8407 E3000PEX-4 NE211 Price HTS HPS Xpeed 5 Interface Cable Page 4-p13 AIR LINE KIT 6 HES Purchasing Example PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug For Europe Product HES Purchasing Example Description Spindle with CAT40 Control Unit 13 ft Motor Cord Air Line Kit CAT. No. 9201 9775 9248 4504 Model HES810-CAT40 NE211 EMCD-810-4M AL-C1204 Total Price 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 4-p15 4-p10-15_HES810_A_1407.qxd 14.8.2 10:29 PM ページ 4-p14 “HES810” CONTROL UNIT “HES810” AIR LINE KIT & MOTOR CORD for international operation • AC100-240V 1,000~80,000 min (rpm) • Maximum Output 350W • -1 CONTROL UNIT NE211 ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 80,000 min-1(rpm) 3.46" E2530 / E2550 ø1.0"/ø0.98" 4504 * : Load Meter [2] Running LED (RUN) LOAD [3] Warning LED (WARNING) •••••• 9.06" 7.48" 0.79" 0.79" load area • :: Continuous load area • : Intermittent • Overload [6] Gear Setting Switch (GEAR) R3.5mm ø15mm [7] Control Switch (AUTO/MANUAL) PF1/4 [9] Start Switch (START) [10] Motor Speed Adjustment Switch (SPEED) Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) [11] Display 2-ø7mm 9.37" Motor Connector ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm [2] [10] [3] [11] CAT. No. Model 4504 AL-C1204 1.18" [1] External Input-Output Connector B (D-SUB15 Female) Standard Equipment · Accessories Price MA ø0.897" ø0.897" E3000 - One Piece E3000 - Modular 4-ø7mm ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Product Air Input Joint ø6 mm [5] [6] Power Switch 4 HES510 [7] [8] [9] Model Power Source Motor Speed Max. Output Power Power Consumption Air Flow Volume Weight Dimensions Communication Connector Inlet with Power Fuse : NE211 : AC120V : 1,000-80,000 min-1(rpm) : 350W : 1.8A : 1.0CFM (36-44PSI) : 6 lb. 2.77 oz. : W3.46" x D5.43" x H9.37" E3000 Control Unit CAT. No. CAT. No. Description · Model Length 9248 Motor Cord 4M EMCD-810-4M 13 ft 9249 Motor Cord 6M EMCD-810-6M 19 ft Motor Cord 8M EMCD-810-8M 26 ft Specifications MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Plug Type Model Price Standard Equipment · Accessories 9250 HPS 9775 120V (B type) NE211 AIR LINE KIT 6 PARTS *Please refer to Technical Data 7-p2~p9 in detail about External Input-Output Connector. *AC100-240V for international operation. Please check the power source plug type and order accordingly. • Power Source Plug Plug Type 7 TECHNICAL DATA For 100V (A type) 8 APPLICATION EXAMPLES For 120V (B type) INDEX 4-p14 Main Usable Area For Japan For U.S.A. and Canada Price 3 MA ø0.897" • Air Cooling Hose : ø4 mm • Reducer • Plug Cap ø1.0" ø0.98" HES810 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Control Panel Extension Cord • Power Cord : 6 ft • Air Hose with filter • Reducer • Air Plug (Provided) • Connector Cap (Provided) • Bracket • Power Cord Grip • Screw • Rubber Pad • Fuse (T6.3AL) 250V: 2 pcs. Xpeed 5 Fit to Standard Equipment · Accessories CONTROL PANEL EXTENSION CORD HES810 HTS iSpeed3 ø1.0"/ø0.98" MOTOR CORD Air Output Joint ø6 mm 2 E2530 / E2550 [4] ø1.0" ø0.98" ø1.18" IMPULSE E2530 / E2550 • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft E4000 3 ROTUS SHEENUS neo SONIC CUTTER ø6 mm [8] Rotating Direction Selector Switch (FWD./REV.) External Input-Output Connector A (D-SUB25 Female) ESPERT PRESTO II [5] Error Reset Switch (RESET) E3000 - Modular ø1.18" of debris while the adjustable regulator provides the correct air pressure for cooling and purging. [4] Error LED (ERROR) 4.7 2" E3000 - One Piece EmaxEVO The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts E2530 / E2550 ø0.897" 1 AIR LINE KIT AL-C1204 [1] Load Meter* 2 iSpeed3 CAT. No. 0.79" 9775 CAT. No. 8.66" 6.69" 1 EmaxEVO CAT. No. Model For use with 8407 E3000PEX-4 NE211 Price HTS HPS Xpeed 5 Interface Cable Page 4-p13 AIR LINE KIT 6 HES Purchasing Example PARTS Product Plug Type For 200V (C type) For 230V (D type) Main Usable Area Without Plug For Europe Product HES Purchasing Example Description Spindle with CAT40 Control Unit 13 ft Motor Cord Air Line Kit CAT. No. 9201 9775 9248 4504 Model HES810-CAT40 NE211 EMCD-810-4M AL-C1204 Total Price 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 4-p15 4-p16-22_HTS_A_1407.qxd 14.8.2 10:31 PM ページ 4-p16 HSM SOLUTIONS “HES SERIES” SHANKS Product CAT. No. Description Model Fit to Price 1 ø63 mm 3.80" 4.56" ø63 mm ROTUS IMPULSE iSpeed3 E2530 / E2550 ø63 mm 4.96" ø63 mm 2 ASE HES510-NT30-SK 9153 ASE HES510-NT30M-SK 9154 • Type : NT30 • Weight : 24.69 oz. HES510-NT30 • Type : NT30M *Metric threads • Weight : 24.69 oz. HES510-NT30M ASE HES510-BT40-SK 9149 • Type : BT40 • Weight : 27.87 oz. HES510-BT40 HES810-BT40 ASE HES510-NT40-SK 9155 ASE HES510-NT40M-SK 9156 • Type : NT40 • Weight : 32.80 oz. HES510-NT40 HES810-NT40 • Type : NT40M *Metric threads • Weight : 32.80 oz. HES510-NT40M HES510-BT30 HES810-BT30 Air System ø1.0"/ø0.98" ESPERT HTS1501S-BT30 / 40 / 50 150,000 min (rpm) Output : 25W iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" ø72 mm 4.79" 9191 HES510-IT40-SK • Type : IT40 • Weight : 37.81 oz. HES510-IT40 HES810-IT40 HTS1501S-HSK E25 / 32 / 40 / 50 ø1.0" ø0.98" ø63 mm • Type : CAT40 • Weight : 38.20 oz. HES510-CAT40 HES810-CAT40 6.69" ø100 mm MS ø97 mm HES510 ASE HES510-BT50-SK 9150 • Type : BT50 • Weight : 122.75 oz. ASE HES510-NT50-SK 9157 ASE HES510-NT50M-SK 9158 • Type : NT50 • Weight : 135.80 oz. HES510-NT50 • Type : NT50M *Metric threads • Weight : 136.16 oz. HES510-NT50M 9190 HES510-IT50-SK • Type : IT50 • Weight : 103.56 oz. HES510-IT50 ø0.897" HTS1501S-HSK A63 150,000 min-1(rpm) Output : 25W ø98 mm ø100 mm 7 8 • Type : CAT50 • Weight : 103.53 oz. HES510-CAT50 ASE HES510-HSK A63-SK 9152 • Type : HSK A63 • Weight : 43.03 oz. HES510-HSK A63 HES810-HSK A63 ASE HES510-HSK A100-SK 9151 • Type : HSK A100 • Weight : 102.65 oz. K812 HES510-R8-SK A271 • Type : R8 • Weight : 32.00 oz. HTS1501S-HSK F63 150,000 min-1(rpm) Output : 25W HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 HES510-HSK A100 HTS1501S-M2040 5.94" ø63 mm APPLICATION EXAMPLES ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 5.12" PARTS TECHNICAL DATA MS HTS ASE HES510-CAT50-SK 9192 4.02" ø63 mm 6 ø1.18" HES810 5 AIR LINE KIT ø1.0" ø0.98" 4 5.70" HTS Xpeed E3000 - 80,000rpm MA HES510-BT50 HES810-BT50 HES810 HPS ø1.0"/ø0.98" ø0.897" 3 5.71" 4 E3000 - Modular E4000 5.70" ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 150,000 min (rpm) Output : 25W ASE HES510-CAT40-SK 9193 ø100 mm ø0.897" -1 4.78" 3 MA E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" E4000 SHEENUS neo SONIC CUTTER 2 ø1.18" E3000 - 80,000rpm IMPULSE E2530 / E2550 ø0.897" E3000 - Modular ROTUS PRESTO II -1 E2530 / E2550 E3000 - One Piece 1 EmaxEVO 3.87" PRESTO II SHEENUS neo SONIC CUTTER • Type : BT30 • Weight : 23.28 oz. Series Dramatically shorten mold cavity machining time. EmaxEVO ESPERT ASE HES510-BT30-SK 9148 HTS 8 APPLICATION EXAMPLES HES510-R8 150,000 min-1(rpm) Output : 25W INDEX TECHNICAL DATA INDEX ø63 mm 4.17" K812 HES510-ST32-SK A272 • Type : ST32 • Weight : 31.82 oz. 4-p16 *For dimensions of taper shanks, please see page 4-p30~32. HES510-ST32 HES810-ST32 * Order by catalog number. 4-p17 4-p16-22_HTS_A_1407.qxd 14.8.2 10:31 PM ページ 4-p16 HSM SOLUTIONS “HES SERIES” SHANKS Product CAT. No. Description Model Fit to Price 1 ø63 mm 3.80" 4.56" ø63 mm ROTUS IMPULSE iSpeed3 E2530 / E2550 ø63 mm 4.96" ø63 mm 2 ASE HES510-NT30-SK 9153 ASE HES510-NT30M-SK 9154 • Type : NT30 • Weight : 24.69 oz. HES510-NT30 • Type : NT30M *Metric threads • Weight : 24.69 oz. HES510-NT30M ASE HES510-BT40-SK 9149 • Type : BT40 • Weight : 27.87 oz. HES510-BT40 HES810-BT40 ASE HES510-NT40-SK 9155 ASE HES510-NT40M-SK 9156 • Type : NT40 • Weight : 32.80 oz. HES510-NT40 HES810-NT40 • Type : NT40M *Metric threads • Weight : 32.80 oz. HES510-NT40M HES510-BT30 HES810-BT30 Air System ø1.0"/ø0.98" ESPERT HTS1501S-BT30 / 40 / 50 150,000 min (rpm) Output : 25W iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" ø72 mm 4.79" 9191 HES510-IT40-SK • Type : IT40 • Weight : 37.81 oz. HES510-IT40 HES810-IT40 HTS1501S-HSK E25 / 32 / 40 / 50 ø1.0" ø0.98" ø63 mm • Type : CAT40 • Weight : 38.20 oz. HES510-CAT40 HES810-CAT40 6.69" ø100 mm MS ø97 mm HES510 ASE HES510-BT50-SK 9150 • Type : BT50 • Weight : 122.75 oz. ASE HES510-NT50-SK 9157 ASE HES510-NT50M-SK 9158 • Type : NT50 • Weight : 135.80 oz. HES510-NT50 • Type : NT50M *Metric threads • Weight : 136.16 oz. HES510-NT50M 9190 HES510-IT50-SK • Type : IT50 • Weight : 103.56 oz. HES510-IT50 ø0.897" HTS1501S-HSK A63 150,000 min-1(rpm) Output : 25W ø98 mm ø100 mm 7 8 • Type : CAT50 • Weight : 103.53 oz. HES510-CAT50 ASE HES510-HSK A63-SK 9152 • Type : HSK A63 • Weight : 43.03 oz. HES510-HSK A63 HES810-HSK A63 ASE HES510-HSK A100-SK 9151 • Type : HSK A100 • Weight : 102.65 oz. K812 HES510-R8-SK A271 • Type : R8 • Weight : 32.00 oz. HTS1501S-HSK F63 150,000 min-1(rpm) Output : 25W HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 HES510-HSK A100 HTS1501S-M2040 5.94" ø63 mm APPLICATION EXAMPLES ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 5.12" PARTS TECHNICAL DATA MS HTS ASE HES510-CAT50-SK 9192 4.02" ø63 mm 6 ø1.18" HES810 5 AIR LINE KIT ø1.0" ø0.98" 4 5.70" HTS Xpeed E3000 - 80,000rpm MA HES510-BT50 HES810-BT50 HES810 HPS ø1.0"/ø0.98" ø0.897" 3 5.71" 4 E3000 - Modular E4000 5.70" ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 150,000 min (rpm) Output : 25W ASE HES510-CAT40-SK 9193 ø100 mm ø0.897" -1 4.78" 3 MA E3000 - One Piece ø1.18" ø1.0"/ø0.98" ø0.897" E4000 SHEENUS neo SONIC CUTTER 2 ø1.18" E3000 - 80,000rpm IMPULSE E2530 / E2550 ø0.897" E3000 - Modular ROTUS PRESTO II -1 E2530 / E2550 E3000 - One Piece 1 EmaxEVO 3.87" PRESTO II SHEENUS neo SONIC CUTTER • Type : BT30 • Weight : 23.28 oz. Series Dramatically shorten mold cavity machining time. EmaxEVO ESPERT ASE HES510-BT30-SK 9148 HTS 8 APPLICATION EXAMPLES HES510-R8 150,000 min-1(rpm) Output : 25W INDEX TECHNICAL DATA INDEX ø63 mm 4.17" K812 HES510-ST32-SK A272 • Type : ST32 • Weight : 31.82 oz. 4-p16 *For dimensions of taper shanks, please see page 4-p30~32. HES510-ST32 HES810-ST32 * Order by catalog number. 4-p17 4-p16-22_HTS_A_1407.qxd 14.8.2 10:31 PM ページ 4-p18 ULTRA-HIGH SPEED AIR TURBINE MILLING SPINDLE HTS SERIES Air System COOLANT 1 EmaxEVO CAT. No. HTS Series Features HTS Series can be used in conjunction with water or oil based coolants. 8296 1 HTS1501S-BT30 • stable milling conditions are • High Speed 150,000 min (rpm) • Highly possible even with very small diameter Suitable for cutting tool diameters of less • than R0.5mm in reference to Ball End Mills cutting tools. • Negligible spindle expansion Accuracy is within 1 µm • Spindle Dramatically shorten mold cavity • machining time • Very High Feed Rates are possible BT30 taper shanks make this spindle very easy to attach to small machining centers. Very High speed milling is possible. -1 2 Usable max. cutting tool diameter : Ball End Mill R0.5 mm, Square End Mill ø1 mm 1.34" Air Turbine mechanism has extremely low heat generation. Up to cutting tool R x 0.1 mm depth of cut is possible. IMPULSE (1.91") 3.25" Air Turbine Spindle 0.69" (0.39") BT30 ø46 mm SHEENUS neo SONIC CUTTER 5.15" ø49.5 mm PRESTO II PRESTO II CAT. No. Model Weight 8296 HTS1501S-BT30 36.33 oz. Price iSpeed3 • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft HTS Series Milling Capacity Reference E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece E3000 - Modular E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" Milling : Straight Milling / Work : NAK80 / Motor Speed : 150,000 min-1(rpm) Caution) E3000 - One Piece 1. Ball End Mill Type with ultra hard coating. Cutting tool capabilities vary depending on the tools being used. 2. Milling capacity may change depending on the tools being used, the material being cut and other application variables. E3000 - Modular ø1.18" • 120 120 100 100 ) ø0.897" 80 Milling Capacity Area 60 40 20 ø1.0" ø0.98" HES510 HES810 HTS E4000 • BT40 taper shanks make this spindle very easy to attach to a wide variety of machining centers. Very High speed milling is possible. Milling Capacity Area 60 (0.58") 40 12500 15000 0 • 2500 5000 7500 10000 f (mm/min) 12500 15000 ø0.897" 0.69" (0.39") ø1.0" ø0.98" Air Turbine Spindle BT40 CAT. No. Model Weight 8297 HTS1501S-BT40 59.97 oz. Price 120 120 Standard Equipment · Accessories 100 ) 100 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 80 Milling Capacity Area 60 40 20 0 80 Milling Capacity Area 4 • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft 60 40 HES510 HES810 20 2500 5000 7500 10000 f (mm/min) 12500 15000 0 2500 5000 7500 10000 f (mm/min) 12500 HTS 15000 HPS HPS Xpeed 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4-p18 HTS1501S-BT50 5 • Collet (CHA-[][]) ........................................... ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • (0.58") BT50 taper shanks make this spindle very easy to attach to a wide variety of machining centers. Very High speed milling is possible. 7.89" 3.88" 1.34" (4.01") BT50 Air Turbine Spindle ø1.95" CAT. No. 8281 Model Weight 6 HTS Series Connection Drawing Price 7 TECHNICAL DATA HTS1501S-BT50 158.73 oz. Standard Equipment · Accessories Clean, lubricated, and regulated air is required for HTS Series spindles. Please refer to the diagram to the right for proper connections. AL-M1202 incorporates a filter, regulator and lubricator to provide the appropriate air. AIR LINE KIT PARTS 0.69" (0.39") ø100 mm PARTS 8281 < Optional > ø0.46" 6 • Speed .............................................. 150,000 min-1(rpm) (71PSI) • Max. Output Power ........................................................ 25W • Air type ................................................... Side Air Supply Type • Shank .......... Straight, BT30 / 40 / 50, HSK E25 / 32 / 40 / 50 / A63 / F63 • Proper Air Pressure .................................................. 42~71PSI • Air Consumption ...................................................... 3.18CFM • Spindle Accuracy .................................................. Within 1 µm • Hose Diameter (Air Intake) .................................... ø6 mm (O.D.) • Standard Size Collet (CHA-4.0) .................................... ø4.0 mm ø1.75" AIR LINE KIT Xpeed CAT. No. HTS Series Specifications ø0.98" 5 ø1.18" MS Ball End Mill Size : R0.5 mm L = 2.5 mm ø63 mm 7500 10000 f (mm/min) (2.57") ø0.46" 5000 3 MA 6.10" 3.52" ø1.75" 2500 Ball End Mill Size : R0.2 mm L = 1.0 mm Cutting depth ( 4 80 ø0.98" 0 • E3000 - 80,000rpm HTS1501S-BT40 1.34" ) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 8297 20 ø1.18" MS CAT. No. ø1.95" MA Cutting depth ( 3 ø1.0"/ø0.98" ø0.897" ) E4000 • Ball End Mill Size : R0.1 mm L = 0.5 mm Cutting depth ( E3000 - 80,000rpm ø1.18" Ball End Mill Size : R0.05 mm L = 0.1 mm Cutting depth ( ø1.0"/ø0.98" ø0.897" SHEENUS neo SONIC CUTTER 2 Standard Equipment · Accessories iSpeed3 ø0.897" ESPERT ROTUS (0.58") ø0.98" IMPULSE ø0.46" ROTUS ø1.75" ESPERT EmaxEVO • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft 8 APPLICATION EXAMPLES INDEX Compressor Air Line Kit AL-M1202 (Refer to 4-p22 in detail) HTS Series *For dimensions of taper shanks, please see page 4-p30, 31. * Order by catalog number. 4-p19 4-p16-22_HTS_A_1407.qxd 14.8.2 10:31 PM ページ 4-p18 ULTRA-HIGH SPEED AIR TURBINE MILLING SPINDLE HTS SERIES Air System COOLANT 1 EmaxEVO CAT. No. HTS Series Features HTS Series can be used in conjunction with water or oil based coolants. 8296 1 HTS1501S-BT30 • stable milling conditions are • High Speed 150,000 min (rpm) • Highly possible even with very small diameter Suitable for cutting tool diameters of less • than R0.5mm in reference to Ball End Mills cutting tools. • Negligible spindle expansion Accuracy is within 1 µm • Spindle Dramatically shorten mold cavity • machining time • Very High Feed Rates are possible BT30 taper shanks make this spindle very easy to attach to small machining centers. Very High speed milling is possible. -1 2 Usable max. cutting tool diameter : Ball End Mill R0.5 mm, Square End Mill ø1 mm 1.34" Air Turbine mechanism has extremely low heat generation. Up to cutting tool R x 0.1 mm depth of cut is possible. IMPULSE (1.91") 3.25" Air Turbine Spindle 0.69" (0.39") BT30 ø46 mm SHEENUS neo SONIC CUTTER 5.15" ø49.5 mm PRESTO II PRESTO II CAT. No. Model Weight 8296 HTS1501S-BT30 36.33 oz. Price iSpeed3 • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft HTS Series Milling Capacity Reference E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 E3000 - One Piece E3000 - Modular E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" Milling : Straight Milling / Work : NAK80 / Motor Speed : 150,000 min-1(rpm) Caution) E3000 - One Piece 1. Ball End Mill Type with ultra hard coating. Cutting tool capabilities vary depending on the tools being used. 2. Milling capacity may change depending on the tools being used, the material being cut and other application variables. E3000 - Modular ø1.18" • 120 120 100 100 ) ø0.897" 80 Milling Capacity Area 60 40 20 ø1.0" ø0.98" HES510 HES810 HTS E4000 • BT40 taper shanks make this spindle very easy to attach to a wide variety of machining centers. Very High speed milling is possible. Milling Capacity Area 60 (0.58") 40 12500 15000 0 • 2500 5000 7500 10000 f (mm/min) 12500 15000 ø0.897" 0.69" (0.39") ø1.0" ø0.98" Air Turbine Spindle BT40 CAT. No. Model Weight 8297 HTS1501S-BT40 59.97 oz. Price 120 120 Standard Equipment · Accessories 100 ) 100 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 80 Milling Capacity Area 60 40 20 0 80 Milling Capacity Area 4 • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft 60 40 HES510 HES810 20 2500 5000 7500 10000 f (mm/min) 12500 15000 0 2500 5000 7500 10000 f (mm/min) 12500 HTS 15000 HPS HPS Xpeed 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4-p18 HTS1501S-BT50 5 • Collet (CHA-[][]) ........................................... ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • (0.58") BT50 taper shanks make this spindle very easy to attach to a wide variety of machining centers. Very High speed milling is possible. 7.89" 3.88" 1.34" (4.01") BT50 Air Turbine Spindle ø1.95" CAT. No. 8281 Model Weight 6 HTS Series Connection Drawing Price 7 TECHNICAL DATA HTS1501S-BT50 158.73 oz. Standard Equipment · Accessories Clean, lubricated, and regulated air is required for HTS Series spindles. Please refer to the diagram to the right for proper connections. AL-M1202 incorporates a filter, regulator and lubricator to provide the appropriate air. AIR LINE KIT PARTS 0.69" (0.39") ø100 mm PARTS 8281 < Optional > ø0.46" 6 • Speed .............................................. 150,000 min-1(rpm) (71PSI) • Max. Output Power ........................................................ 25W • Air type ................................................... Side Air Supply Type • Shank .......... Straight, BT30 / 40 / 50, HSK E25 / 32 / 40 / 50 / A63 / F63 • Proper Air Pressure .................................................. 42~71PSI • Air Consumption ...................................................... 3.18CFM • Spindle Accuracy .................................................. Within 1 µm • Hose Diameter (Air Intake) .................................... ø6 mm (O.D.) • Standard Size Collet (CHA-4.0) .................................... ø4.0 mm ø1.75" AIR LINE KIT Xpeed CAT. No. HTS Series Specifications ø0.98" 5 ø1.18" MS Ball End Mill Size : R0.5 mm L = 2.5 mm ø63 mm 7500 10000 f (mm/min) (2.57") ø0.46" 5000 3 MA 6.10" 3.52" ø1.75" 2500 Ball End Mill Size : R0.2 mm L = 1.0 mm Cutting depth ( 4 80 ø0.98" 0 • E3000 - 80,000rpm HTS1501S-BT40 1.34" ) ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 8297 20 ø1.18" MS CAT. No. ø1.95" MA Cutting depth ( 3 ø1.0"/ø0.98" ø0.897" ) E4000 • Ball End Mill Size : R0.1 mm L = 0.5 mm Cutting depth ( E3000 - 80,000rpm ø1.18" Ball End Mill Size : R0.05 mm L = 0.1 mm Cutting depth ( ø1.0"/ø0.98" ø0.897" SHEENUS neo SONIC CUTTER 2 Standard Equipment · Accessories iSpeed3 ø0.897" ESPERT ROTUS (0.58") ø0.98" IMPULSE ø0.46" ROTUS ø1.75" ESPERT EmaxEVO • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft 8 APPLICATION EXAMPLES INDEX Compressor Air Line Kit AL-M1202 (Refer to 4-p22 in detail) HTS Series *For dimensions of taper shanks, please see page 4-p30, 31. * Order by catalog number. 4-p19 4-p16-22_HTS_A_1407.qxd 14.8.2 10:32 PM ページ 4-p20 “HTS SERIES” ULTRA-HIGH SPEED AIR TURBINE MILLING SPINDLE COOLANT HTS1501S-HSK E25 (0.58") 0.69" 1.34" HSK E25 Air Turbine Spindle ø52 mm ø49.5 mm ø0.98" ø0.46" ø1.75" SHEENUS neo SONIC CUTTER ø1.95" PRESTO II Model Weight 8300 HTS1501S-HSK E25 26.81 oz. Price • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft iSpeed3 CAT. No. Model Weight 8298 HTS1501S-HSK A63 49.38 oz. Price SHEENUS neo SONIC CUTTER Standard Equipment · Accessories 2 • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" E3000 - One Piece ø1.0"/ø0.98" CAT. No. 8283 E3000 - Modular HTS1501S-HSK E32 (0.58") ø1.0"/ø0.98" ø0.897" 1.34" E3000 - 80,000rpm CAT. No. 8282 • (0.63") 1.34" 0.69" (0.39") HSK E32 Model Weight 8283 HTS1501S-HSK E32 27.87 oz. HSK F63 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. (0.98") HSK F63 ø2.05" Air Turbine Spindle Price CAT. No. Model Weight 8282 HTS1501S-HSK F63 48.68 oz. Price ø1.18" E3000 - 80,000rpm ø63 mm ø0.46" ø0.98" ø1.75" ø1.95" ø52 mm ø49.5 mm ø0.46" ø0.98" ø1.75" E4000 ø1.95" E4000 MA E3000 - Modular ø1.0"/ø0.98" ø0.897" 0.69" (0.39") CAT. No. ø0.897" E3000 - One Piece • 4.61" 3.62" Air Turbine Spindle E2530 / E2550 HTS1501S-HSK F63 (0.58") HSK E32 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. 3.39" 2.76" ø1.18" 3 IMPULSE PRESTO II E2530 / E2550 E2530 / E2550 ESPERT ROTUS Air Turbine Spindle ø2.05" Standard Equipment · Accessories 2 EmaxEVO HSK A63 0.69" (0.39") CAT. No. HSK A63 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. (1.26") ø63 mm (0.39") IMPULSE 1 • 4.88" 3.62" ø0.98 1.34" (0.58") HSK E25 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. (0.51") 2.64" ESPERT ROTUS • 3.15" HTS1501S-HSK A63 ø0.46" EmaxEVO 8298 CAT. No. ø1.75" 8300 CAT. No. ø1.95" 1 COOLANT Standard Equipment · Accessories 3 MA Standard Equipment · Accessories ø0.897" ø0.897" • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft ø1.0" ø0.98" ø1.18" • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft ø1.0" ø0.98" ø1.18" MS MS HTS1501S-HSK E40 HSK E40 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. 0.69" HSK E40 (0.39") HES810 CAT. No. ø63 mm ø0.46" ø0.98" ø1.95" ø1.75" Xpeed 8279 PARTS 8280 CAT. No. 7 0.69" Model Weight Price (1.34") 8 0.69" HSK E50 (0.39") ø63 mm ø0.46" 8299 HTS1501S-M2040 25.04 oz. Price HES810 Standard Equipment · Accessories HPS Xpeed 5 AIR LINE KIT PARTS Air Turbine Spindle 8280 ø0.98" Weight 6 CAT. No. ø1.95" Model • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft HSK E50 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. 0.98" APPLICATION EXAMPLES ø1.75" CAT. No. HTS HTS1501S-HSK E40 34.57 oz. • (3.96") (2.97") 4 HES510 Air Turbine Spindle HTS1501S-HSK E50 (0.58") TECHNICAL DATA INDEX 1.34" • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft AIR LINE KIT 6 Straight shanks make this spindle very easy to attach to smaller machining centers. Very High speed milling is possible. (1.57") (0.39") Standard Equipment · Accessories 5 • 3.82" 2.24" Air Turbine Spindle HTS HPS (0.58") 0 ø20-0.01 mm (1.34") 0.79" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HTS1501S-M2040 ø49.5 mm HES510 • (3.68") (2.89") 8299 ø0.46" (0.58") 4 CAT. No. ø1.75" 8279 CAT. No. ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Model HTS1501S-HSK E50 Weight Caution • 7 Do not rotate the machining center's main spindle with the HTS1501 spindle installed. TECHNICAL DATA 8 Price APPLICATION EXAMPLES 37.74 oz INDEX Standard Equipment · Accessories • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft 4-p20 *For dimensions of taper shanks, please see page 4-p31. * Order by catalog number. 4-p21 4-p16-22_HTS_A_1407.qxd 14.8.2 10:32 PM ページ 4-p20 “HTS SERIES” ULTRA-HIGH SPEED AIR TURBINE MILLING SPINDLE COOLANT HTS1501S-HSK E25 (0.58") 0.69" 1.34" HSK E25 Air Turbine Spindle ø52 mm ø49.5 mm ø0.98" ø0.46" ø1.75" SHEENUS neo SONIC CUTTER ø1.95" PRESTO II Model Weight 8300 HTS1501S-HSK E25 26.81 oz. Price • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft iSpeed3 CAT. No. Model Weight 8298 HTS1501S-HSK A63 49.38 oz. Price SHEENUS neo SONIC CUTTER Standard Equipment · Accessories 2 • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft iSpeed3 E2530 / E2550 ø1.0"/ø0.98" ø0.897" E3000 - One Piece ø1.0"/ø0.98" CAT. No. 8283 E3000 - Modular HTS1501S-HSK E32 (0.58") ø1.0"/ø0.98" ø0.897" 1.34" E3000 - 80,000rpm CAT. No. 8282 • (0.63") 1.34" 0.69" (0.39") HSK E32 Model Weight 8283 HTS1501S-HSK E32 27.87 oz. HSK F63 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. (0.98") HSK F63 ø2.05" Air Turbine Spindle Price CAT. No. Model Weight 8282 HTS1501S-HSK F63 48.68 oz. Price ø1.18" E3000 - 80,000rpm ø63 mm ø0.46" ø0.98" ø1.75" ø1.95" ø52 mm ø49.5 mm ø0.46" ø0.98" ø1.75" E4000 ø1.95" E4000 MA E3000 - Modular ø1.0"/ø0.98" ø0.897" 0.69" (0.39") CAT. No. ø0.897" E3000 - One Piece • 4.61" 3.62" Air Turbine Spindle E2530 / E2550 HTS1501S-HSK F63 (0.58") HSK E32 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. 3.39" 2.76" ø1.18" 3 IMPULSE PRESTO II E2530 / E2550 E2530 / E2550 ESPERT ROTUS Air Turbine Spindle ø2.05" Standard Equipment · Accessories 2 EmaxEVO HSK A63 0.69" (0.39") CAT. No. HSK A63 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. (1.26") ø63 mm (0.39") IMPULSE 1 • 4.88" 3.62" ø0.98 1.34" (0.58") HSK E25 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. (0.51") 2.64" ESPERT ROTUS • 3.15" HTS1501S-HSK A63 ø0.46" EmaxEVO 8298 CAT. No. ø1.75" 8300 CAT. No. ø1.95" 1 COOLANT Standard Equipment · Accessories 3 MA Standard Equipment · Accessories ø0.897" ø0.897" • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft ø1.0" ø0.98" ø1.18" • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft ø1.0" ø0.98" ø1.18" MS MS HTS1501S-HSK E40 HSK E40 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. 0.69" HSK E40 (0.39") HES810 CAT. No. ø63 mm ø0.46" ø0.98" ø1.95" ø1.75" Xpeed 8279 PARTS 8280 CAT. No. 7 0.69" Model Weight Price (1.34") 8 0.69" HSK E50 (0.39") ø63 mm ø0.46" 8299 HTS1501S-M2040 25.04 oz. Price HES810 Standard Equipment · Accessories HPS Xpeed 5 AIR LINE KIT PARTS Air Turbine Spindle 8280 ø0.98" Weight 6 CAT. No. ø1.95" Model • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft HSK E50 taper shanks make this spindle very easy to attach to your machining centers. Very High speed milling is possible. 0.98" APPLICATION EXAMPLES ø1.75" CAT. No. HTS HTS1501S-HSK E40 34.57 oz. • (3.96") (2.97") 4 HES510 Air Turbine Spindle HTS1501S-HSK E50 (0.58") TECHNICAL DATA INDEX 1.34" • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft AIR LINE KIT 6 Straight shanks make this spindle very easy to attach to smaller machining centers. Very High speed milling is possible. (1.57") (0.39") Standard Equipment · Accessories 5 • 3.82" 2.24" Air Turbine Spindle HTS HPS (0.58") 0 ø20-0.01 mm (1.34") 0.79" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HTS1501S-M2040 ø49.5 mm HES510 • (3.68") (2.89") 8299 ø0.46" (0.58") 4 CAT. No. ø1.75" 8279 CAT. No. ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Model HTS1501S-HSK E50 Weight Caution • 7 Do not rotate the machining center's main spindle with the HTS1501 spindle installed. TECHNICAL DATA 8 Price APPLICATION EXAMPLES 37.74 oz INDEX Standard Equipment · Accessories • Collet ø4.0 mm (CHA-4.0) • Collet Nut (CHN-AA) • Wrench (8 x 5), (9 x 11) : 1 pc. each • Filter Joint (FJ-01) • Hose (K-247) : ø6 mm x 13 ft 4-p20 *For dimensions of taper shanks, please see page 4-p31. * Order by catalog number. 4-p21 4-p16-22_HTS_A_1407.qxd 14.8.2 10:32 PM ページ 4-p22 “HTS SERIES” AIR LINE KIT & OIL CAT. No. 4502 1 AIR LINE KIT AL-M1202 0.79" EmaxEVO ESPERT 11.81" 10.24" 0.79" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and 0.79" ROTUS IMPULSE R3.5mm ø15mm PRESTO II ø6 mm PF1/4 8.66" 6.69" SHEENUS neo SONIC CUTTER impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) 2 CAT. No. Model 2-ø7mm iSpeed3 4502 AL-M1202 1.18" E2530 / E2550 ø1.0"/ø0.98" ø0.897" E3000 - One Piece 4.7 2" E2530 / E2550 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price 4-ø7mm E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" LUBRICATING OIL Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 Product Price Product Price ø1.18" Lubricating Oil (32 oz.) MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CAT. No. Model AA10480 K-202 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4-p22 * Order by catalog number. 4-p23-29_HPS_A_1407.qxd 14.8.2 10:35 PM ページ 1 HSM SOLUTIONS HPS Air System Series 1 Fully Tool Changeable Air Motor Spindle. EmaxEVO ESPERT ROTUS IMPULSE PRESTO II HPS SERIES BT30 25,000 min-1(rpm) Output : 77W SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 50,000 min-1(rpm) Output : 51W ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" HPS SERIES CAT40 25,000 min-1(rpm) Output : 77W E3000 - 80,000rpm E4000 3 MA ø0.897" 50,000 min-1(rpm) Output : 51W ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4-p23 4-p23-29_HPS_A_1407.qxd 14.8.2 10:35 PM ページ 4-p24 HIGH-SPEED AIR MOTOR MILLING SPINDLE HPS SERIES ESPERT ROTUS • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER E2530 / E2550 ø1.0"/ø0.98" Fully tool changeable spindles for transfer from the machine magazine to the main spindle without the need to connect the air supply. • High Precision Spindle All Spindles are guaranteed to be less than 1um T.I.R. at the spindle taper, allowing for excellent surface finish and extended tool life. True High Speed Machining can be achieved with the high speed and accuracy of the HPS250 / 500. E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" • Minimal Thermal Growth E4000 MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" • No Main Spindle Wear Machines main spindle is used only to hold the HPS Spindle, providing longer main spindle life. Running a machine spindle at the machines maximum rpm for extended periods of time will severely affect the machines spindle longevity. • • Speed ................................................................... 25,000 min-1(rpm) (73PSI) • Max. Output Power .................................................................. 77W (73PSI) • Proper Air Pressure .......................................................................... 73PSI • Air Consumption ......................................................................... 6.36CFM • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHK-3.175) ....................................................... ø1/8" < Optional > • Collet (CHK-[][]) ............................................................ ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Grindstone Arbor (AGM-03) ..................... For grinding wheel with I.D. of ø5 mm • HPS250 Series Torque-Speed Characteristics EmaxEVO ESPERT ROTUS 14 Air Pressure IMPULSE 73PSI 12 10 PRESTO II 8 SHEENUS neo SONIC CUTTER 6 4 2 2 0 5 15 10 20 25 iSpeed3 Speed { x 103 min-1(rpm) } E2530 / E2550 ø1.0"/ø0.98" • Positioning Block E2530 / E2550 We provide the positioning block to mate the HPS spindle with the machine. Several designs are available depending on the machine manufacturer and machine model and year of manufacture. E3000 - One Piece The motor and spindle are built as a single unit to minimize length and weight for usage on a wide variety of machines. Spindle and motor constructed of precision ground SUS-416. ø1.0" ø0.98" MS Our Air Line Kit provides lubricated air to cool, purge and lubricate the motor and spindle for extended machining operations that are typical for high speed machining. Unused lubrication oil is returned to the reservoir. • Integral Motor and Spindle ø0.897" ø1.18" • Dedicated Air System Constant cooling and lubrication of the spindle and motor ensures minimal thermal growth, which promotes extremely high accuracy and long bearing life. E3000 - 80,000rpm 3 Meets micro mill and drill manufacturers spindle speed requirements for many applications where small hole drilling and light milling are required. • Uninterrupted Machining 2 iSpeed3 25,000 & 50,000 min-1(rpm) 1 HPS250 Series Specifications Torque (cN.m) HPS Series Features EmaxEVO Minimal Vibration ø0.897" E3000 - Modular HPS500 Series Specifications ø1.18" • Speed ................................................................... 50,000 min-1(rpm) (73PSI) • Max. Output Power .................................................................. 51W (73PSI) • Proper Air Pressure .......................................................................... 73PSI • Air Consumption ......................................................................... 5.12CFM • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHA-3.175) ....................................................... ø1/8" < Optional > • Collet (CHA-[][]) .............................................................. ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Grindstone Arbor (AGM-01A) ................... For grinding wheel with I.D. of ø5 mm • HPS500 Series Torque-Speed Characteristics ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Air Pressure 73PSI 5 Torque (cN.m) 1 Air System 3 4 MA 3 ø0.897" 2 ø1.0" ø0.98" 1 ø1.18" MS Gearless operation eliminates heat and vibration affording high RPM for micro milling and micro drilling of all materials. Helps extend spindle bearing and cutting tool life. 0 5 10 15 25 20 Speed { x 103 30 35 min-1(rpm) 40 45 50 } ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HPS System Example HES810 HTS HES810 HTS HPS HPS HPS System Example Xpeed Description 5 50,000min-1 (rpm) Spindle with CAT40 Generic Block Air Line Kit AIR LINE KIT 6 Xpeed CAT. No. HPS10 BLC2 4502 Model HPS500-CAT40A GB40 AL-M1202 Total PARTS Price 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4-p24 Caution • Do not rotate the main spindle when in use. Damage to the spindle will result as well as danger to the operator 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 4-p25 4-p23-29_HPS_A_1407.qxd 14.8.2 10:35 PM ページ 4-p24 HIGH-SPEED AIR MOTOR MILLING SPINDLE HPS SERIES ESPERT ROTUS • IMPULSE PRESTO II SHEENUS neo SONIC CUTTER E2530 / E2550 ø1.0"/ø0.98" Fully tool changeable spindles for transfer from the machine magazine to the main spindle without the need to connect the air supply. • High Precision Spindle All Spindles are guaranteed to be less than 1um T.I.R. at the spindle taper, allowing for excellent surface finish and extended tool life. True High Speed Machining can be achieved with the high speed and accuracy of the HPS250 / 500. E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" • Minimal Thermal Growth E4000 MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" • No Main Spindle Wear Machines main spindle is used only to hold the HPS Spindle, providing longer main spindle life. Running a machine spindle at the machines maximum rpm for extended periods of time will severely affect the machines spindle longevity. • • Speed ................................................................... 25,000 min-1(rpm) (73PSI) • Max. Output Power .................................................................. 77W (73PSI) • Proper Air Pressure .......................................................................... 73PSI • Air Consumption ......................................................................... 6.36CFM • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHK-3.175) ....................................................... ø1/8" < Optional > • Collet (CHK-[][]) ............................................................ ø0.5 mm~ø6.35 mm (See Page 6-p3 for details) • Grindstone Arbor (AGM-03) ..................... For grinding wheel with I.D. of ø5 mm • HPS250 Series Torque-Speed Characteristics EmaxEVO ESPERT ROTUS 14 Air Pressure IMPULSE 73PSI 12 10 PRESTO II 8 SHEENUS neo SONIC CUTTER 6 4 2 2 0 5 15 10 20 25 iSpeed3 Speed { x 103 min-1(rpm) } E2530 / E2550 ø1.0"/ø0.98" • Positioning Block E2530 / E2550 We provide the positioning block to mate the HPS spindle with the machine. Several designs are available depending on the machine manufacturer and machine model and year of manufacture. E3000 - One Piece The motor and spindle are built as a single unit to minimize length and weight for usage on a wide variety of machines. Spindle and motor constructed of precision ground SUS-416. ø1.0" ø0.98" MS Our Air Line Kit provides lubricated air to cool, purge and lubricate the motor and spindle for extended machining operations that are typical for high speed machining. Unused lubrication oil is returned to the reservoir. • Integral Motor and Spindle ø0.897" ø1.18" • Dedicated Air System Constant cooling and lubrication of the spindle and motor ensures minimal thermal growth, which promotes extremely high accuracy and long bearing life. E3000 - 80,000rpm 3 Meets micro mill and drill manufacturers spindle speed requirements for many applications where small hole drilling and light milling are required. • Uninterrupted Machining 2 iSpeed3 25,000 & 50,000 min-1(rpm) 1 HPS250 Series Specifications Torque (cN.m) HPS Series Features EmaxEVO Minimal Vibration ø0.897" E3000 - Modular HPS500 Series Specifications ø1.18" • Speed ................................................................... 50,000 min-1(rpm) (73PSI) • Max. Output Power .................................................................. 51W (73PSI) • Proper Air Pressure .......................................................................... 73PSI • Air Consumption ......................................................................... 5.12CFM • Spindle Accuracy .................................................................... Within 1 µm • Standard Size Collet (CHA-3.175) ....................................................... ø1/8" < Optional > • Collet (CHA-[][]) .............................................................. ø0.5 mm~ø4.0 mm (See Page 6-p2 for details) • Grindstone Arbor (AGM-01A) ................... For grinding wheel with I.D. of ø5 mm • HPS500 Series Torque-Speed Characteristics ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 Air Pressure 73PSI 5 Torque (cN.m) 1 Air System 3 4 MA 3 ø0.897" 2 ø1.0" ø0.98" 1 ø1.18" MS Gearless operation eliminates heat and vibration affording high RPM for micro milling and micro drilling of all materials. Helps extend spindle bearing and cutting tool life. 0 5 10 15 25 20 Speed { x 103 30 35 min-1(rpm) 40 45 50 } ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HPS System Example HES810 HTS HES810 HTS HPS HPS HPS System Example Xpeed Description 5 50,000min-1 (rpm) Spindle with CAT40 Generic Block Air Line Kit AIR LINE KIT 6 Xpeed CAT. No. HPS10 BLC2 4502 Model HPS500-CAT40A GB40 AL-M1202 Total PARTS Price 5 AIR LINE KIT 6 PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4-p24 Caution • Do not rotate the main spindle when in use. Damage to the spindle will result as well as danger to the operator 8 APPLICATION EXAMPLES INDEX * Order by catalog number. 4-p25 4-p23-29_HPS_A_1407.qxd 14.8.2 10:35 PM ページ 4-p26 “HPS SERIES” SPINDLE BT30 1 EmaxEVO COOLANT HPS Series can be used in conjunction with water or oil based coolants. Dimensions shown on this page are Note : all in metric (mm). Please divide them by 25.4 for conversion to inch. HPS250-BT30 / HPS500-BT30 CAT40 Dimensions shown on this page are Note : all in metric (mm). Please divide them by 25.4 for conversion to inch. COOLANT HPS250-CAT40 / HPS500-CAT40 1 HPS250-BT30A HPS250-BT30B HPS250-BT30C HPS250-CAT40A HPS250-CAT40B HPS250-CAT40C Spindle Key relationship to Driven Pin 0˚ fixed position Spindle Key relationship to Driven Pin 45˚ , -45˚ Spindle Key relationship to Driven Pin 90˚, 180˚, 270˚, 360˚ Spindle Key relationship to Driven Pin 360˚ rotation position Spindle Key relationship to Driven Pin 360˚ rotation position Spindle Key relationship to Driven Pin 360˚ rotation position EmaxEVO ESPERT ROTUS ESPERT ROTUS IMPULSE IMPULSE R40 R40 R15 R15 R41 5 *1 (-1*2 ) R15 65 R41 CAT40 PRESTO II CAT40 2 48 48 50.5 (197.5) ø49 ø47.5 ø0.897" E3000 - One Piece E3000 - Modular 22 22 ø1.0"/ø0.98" E2530 / E2550 17.5 ø47.5 22 ø47.5 ø49 E2530 / E2550 42.6 50.5 (197.5) ø49 42.6 17.5 (197.5) ø47.5 42.6 17.5 ø49 50.5 48.5 (207.5) ø47.5 29.5 ø49 E4000 *1: Compressed Position *2: Free Position Air Motor Spindle : 25,000 min-1(rpm) MA Type CAT. No. Model A HPS01 HPS250-BT30A ø0.897" ø1.0" ø0.98" ø1.18" B HPS02 HPS250-BT30B C HPS03 HPS250-BT30C Price Weight Standard Equipment · Accessories 6.83 lb. • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. ø15.9 ø22.8 (16.9) ø15.9 ø22.8 (16.9) ø15.9 ø22.8 (16.9) E3000 - 80,000rpm ø15.9 ø22.8 (16.9) ø1.0"/ø0.98" ø0.897" (16.9) ø1.18" (16.9) ø1.18" 3 SHEENUS neo SONIC CUTTER iSpeed3 42.6 (207.5) 22 E3000 - Modular ø47.5 R41 CAT40 22 E3000 - One Piece 29.5 ø0.897" ø49 22 E2530 / E2550 31 (207.5) ø1.0"/ø0.98" 42.6 E2530 / E2550 42.6 43 48.5 iSpeed3 65 48 35*1 (29 *2 ) 48 65 BT30 18*1 (12 *2 ) 52 2 55 BT30 BT30 SHEENUS neo SONIC CUTTER R15 10*1 (4*2 ) 55 6*1 (0*2 ) R15 R40 48 PRESTO II 40 8*1 (2*2 ) R12 ø15.9 ø22.8 ø1.0"/ø0.98" ø0.897" ø15.9 ø22.8 E3000 - 80,000rpm *1: Compressed Position *2: Free Position Air Motor Spindle : 25,000 min-1(rpm) Type CAT. No. Model A HPS07 HPS250-CAT40A Weight Standard Equipment · Accessories 6.61 lb. B HPS08 HPS250-CAT40B 6.83 lb. C HPS09 HPS250-CAT40C Price E4000 3 MA 7.94 lb. ø0.897" • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. 7.94 lb. ø1.0" ø0.98" ø1.18" 7.94 lb. MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HPS500-BT30C HPS500-CAT40A HPS500-CAT40B HPS500-CAT40C Spindle Key relationship to Driven Pin 0˚ fixed position Spindle Key relationship to Driven Pin 45˚ , -45˚ Spindle Key relationship to Driven Pin 90˚, Spindle Key relationship to Driven Pin 360˚ Spindle Key relationship to Driven Pin 360˚ Spindle Key relationship to Driven Pin 360˚ 180˚, 270˚, 360˚ rotation position rotation position rotation position 45 HPS500-BT30B R15 R40 R41 R15 5 *1 (-1*2 ) CAT. No. Model HPS04 HPS500-BT30A B HPS05 HPS500-BT30B C HPS06 HPS500-BT30C Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) • Collet Nut (CHN-A) • Wrench (8 x 5), (10 x 10) : 1 pc. each HES810 CAT40 HTS 10*1 (4*2 ) Xpeed Weight Price 48 Air Motor Spindle : 50,000 min (rpm) CAT. No. Model A HPS10 HPS500-CAT40A 6.61 lb. B HPS11 HPS500-CAT40B 6.83 lb. C HPS12 HPS500-CAT40C 50.5 ø47.5 6 PARTS 7 TECHNICAL DATA ø11.8 ø22.8 8 *1: Compressed Position *2: Free Position -1 Type 17.5 (184.4) ø11.8 ø22.8 42.6 ø47.5 ø49 11.1 ø11.8 ø22.8 6.83 lb. *Call NSK America at 800-585-4675 for the correct HPS Spindle for your machines builder and model. ø49 (14.7) ø11.8 ø22.8 5 AIR LINE KIT (14.7) 48 (184.4) 50.5 (184.4) 17.5 ø47.5 11.1 ø49 42.6 48.5 29.5 ø47.5 *1: Compressed Position *2: Free Position Air Motor Spindle : 50,000 min (rpm) A ø49 42.6 (194.4) ø11.8 ø22.8 -1 Type R41 CAT40 48 8 65 HPS (14.7) ø11.8 ø22.8 R15 R41 CAT40 11.1 (194.4) 29.5 ø47.5 (14.7) (14.7) TECHNICAL DATA ø49 42.6 ø47.5 11.1 7 ø49 11.1 (194.4) PARTS 31 6 42.6 AIR LINE KIT 65 48 35*1 (29 *2 ) 48 48.5 65 BT30 18*1 (12 *2 ) 52 43 Xpeed 5 55 BT30 BT30 HPS 4-p26 R15 R40 6*1 (0*2 ) HTS INDEX HES510 55 50.5 R15 R40 17.5 40 11.1 42.6 R12 8*1 (2*2 ) HES810 APPLICATION EXAMPLES 4 ˚ HES510 (14.7) 4 HPS500-BT30A Standard Equipment · Accessories Weight Price APPLICATION EXAMPLES INDEX 7.94 lb. • Collet ø1/8" (CHA-3.175) • Collet Nut (CHN-A) • Wrench (8 x 5), (10 x 10) : 1 pc. each *For dimensions of taper shanks, please see page 4-p30. 7.94 lb. 7.94 lb. * Order by catalog number. 4-p27 4-p23-29_HPS_A_1407.qxd 14.8.2 10:35 PM ページ 4-p26 “HPS SERIES” SPINDLE BT30 1 EmaxEVO COOLANT HPS Series can be used in conjunction with water or oil based coolants. Dimensions shown on this page are Note : all in metric (mm). Please divide them by 25.4 for conversion to inch. HPS250-BT30 / HPS500-BT30 CAT40 Dimensions shown on this page are Note : all in metric (mm). Please divide them by 25.4 for conversion to inch. COOLANT HPS250-CAT40 / HPS500-CAT40 1 HPS250-BT30A HPS250-BT30B HPS250-BT30C HPS250-CAT40A HPS250-CAT40B HPS250-CAT40C Spindle Key relationship to Driven Pin 0˚ fixed position Spindle Key relationship to Driven Pin 45˚ , -45˚ Spindle Key relationship to Driven Pin 90˚, 180˚, 270˚, 360˚ Spindle Key relationship to Driven Pin 360˚ rotation position Spindle Key relationship to Driven Pin 360˚ rotation position Spindle Key relationship to Driven Pin 360˚ rotation position EmaxEVO ESPERT ROTUS ESPERT ROTUS IMPULSE IMPULSE R40 R40 R15 R15 R41 5 *1 (-1*2 ) R15 65 R41 CAT40 PRESTO II CAT40 2 48 48 50.5 (197.5) ø49 ø47.5 ø0.897" E3000 - One Piece E3000 - Modular 22 22 ø1.0"/ø0.98" E2530 / E2550 17.5 ø47.5 22 ø47.5 ø49 E2530 / E2550 42.6 50.5 (197.5) ø49 42.6 17.5 (197.5) ø47.5 42.6 17.5 ø49 50.5 48.5 (207.5) ø47.5 29.5 ø49 E4000 *1: Compressed Position *2: Free Position Air Motor Spindle : 25,000 min-1(rpm) MA Type CAT. No. Model A HPS01 HPS250-BT30A ø0.897" ø1.0" ø0.98" ø1.18" B HPS02 HPS250-BT30B C HPS03 HPS250-BT30C Price Weight Standard Equipment · Accessories 6.83 lb. • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. ø15.9 ø22.8 (16.9) ø15.9 ø22.8 (16.9) ø15.9 ø22.8 (16.9) E3000 - 80,000rpm ø15.9 ø22.8 (16.9) ø1.0"/ø0.98" ø0.897" (16.9) ø1.18" (16.9) ø1.18" 3 SHEENUS neo SONIC CUTTER iSpeed3 42.6 (207.5) 22 E3000 - Modular ø47.5 R41 CAT40 22 E3000 - One Piece 29.5 ø0.897" ø49 22 E2530 / E2550 31 (207.5) ø1.0"/ø0.98" 42.6 E2530 / E2550 42.6 43 48.5 iSpeed3 65 48 35*1 (29 *2 ) 48 65 BT30 18*1 (12 *2 ) 52 2 55 BT30 BT30 SHEENUS neo SONIC CUTTER R15 10*1 (4*2 ) 55 6*1 (0*2 ) R15 R40 48 PRESTO II 40 8*1 (2*2 ) R12 ø15.9 ø22.8 ø1.0"/ø0.98" ø0.897" ø15.9 ø22.8 E3000 - 80,000rpm *1: Compressed Position *2: Free Position Air Motor Spindle : 25,000 min-1(rpm) Type CAT. No. Model A HPS07 HPS250-CAT40A Weight Standard Equipment · Accessories 6.61 lb. B HPS08 HPS250-CAT40B 6.83 lb. C HPS09 HPS250-CAT40C Price E4000 3 MA 7.94 lb. ø0.897" • Collet ø1/8" (CHK-3.175) • Collet Nut (K-265) • Wrench (12 x 14) : 2 pcs. 7.94 lb. ø1.0" ø0.98" ø1.18" 7.94 lb. MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HPS500-BT30C HPS500-CAT40A HPS500-CAT40B HPS500-CAT40C Spindle Key relationship to Driven Pin 0˚ fixed position Spindle Key relationship to Driven Pin 45˚ , -45˚ Spindle Key relationship to Driven Pin 90˚, Spindle Key relationship to Driven Pin 360˚ Spindle Key relationship to Driven Pin 360˚ Spindle Key relationship to Driven Pin 360˚ 180˚, 270˚, 360˚ rotation position rotation position rotation position 45 HPS500-BT30B R15 R40 R41 R15 5 *1 (-1*2 ) CAT. No. Model HPS04 HPS500-BT30A B HPS05 HPS500-BT30B C HPS06 HPS500-BT30C Standard Equipment · Accessories • Collet ø1/8" (CHA-3.175) • Collet Nut (CHN-A) • Wrench (8 x 5), (10 x 10) : 1 pc. each HES810 CAT40 HTS 10*1 (4*2 ) Xpeed Weight Price 48 Air Motor Spindle : 50,000 min (rpm) CAT. No. Model A HPS10 HPS500-CAT40A 6.61 lb. B HPS11 HPS500-CAT40B 6.83 lb. C HPS12 HPS500-CAT40C 50.5 ø47.5 6 PARTS 7 TECHNICAL DATA ø11.8 ø22.8 8 *1: Compressed Position *2: Free Position -1 Type 17.5 (184.4) ø11.8 ø22.8 42.6 ø47.5 ø49 11.1 ø11.8 ø22.8 6.83 lb. *Call NSK America at 800-585-4675 for the correct HPS Spindle for your machines builder and model. ø49 (14.7) ø11.8 ø22.8 5 AIR LINE KIT (14.7) 48 (184.4) 50.5 (184.4) 17.5 ø47.5 11.1 ø49 42.6 48.5 29.5 ø47.5 *1: Compressed Position *2: Free Position Air Motor Spindle : 50,000 min (rpm) A ø49 42.6 (194.4) ø11.8 ø22.8 -1 Type R41 CAT40 48 8 65 HPS (14.7) ø11.8 ø22.8 R15 R41 CAT40 11.1 (194.4) 29.5 ø47.5 (14.7) (14.7) TECHNICAL DATA ø49 42.6 ø47.5 11.1 7 ø49 11.1 (194.4) PARTS 31 6 42.6 AIR LINE KIT 65 48 35*1 (29 *2 ) 48 48.5 65 BT30 18*1 (12 *2 ) 52 43 Xpeed 5 55 BT30 BT30 HPS 4-p26 R15 R40 6*1 (0*2 ) HTS INDEX HES510 55 50.5 R15 R40 17.5 40 11.1 42.6 R12 8*1 (2*2 ) HES810 APPLICATION EXAMPLES 4 ˚ HES510 (14.7) 4 HPS500-BT30A Standard Equipment · Accessories Weight Price APPLICATION EXAMPLES INDEX 7.94 lb. • Collet ø1/8" (CHA-3.175) • Collet Nut (CHN-A) • Wrench (8 x 5), (10 x 10) : 1 pc. each *For dimensions of taper shanks, please see page 4-p30. 7.94 lb. 7.94 lb. * Order by catalog number. 4-p27 4-p23-29_HPS_A_1407.qxd 14.8.2 10:35 PM ページ 4-p28 “HPS SERIES” POSITIONING BLOCK 4502 CAT. No. Control System Chart EmaxEVO 24V Solenoid Air Valve (not included) ESPERT Air Hose ROTUS 0.79" 1 “HPS SERIES” AIR LINE KIT & OIL IMPULSE AIR LINE KIT AL-M1202 11.81" 10.24" 0.79" impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" ø6 mm 8.66" 6.69" Air Line Kit AL-M1202 / AL-M1203BS2 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model 2-ø7mm iSpeed3 ø1.0"/ø0.98" CNC Unit E2530 / E2550 HPS Series 4.7 2" ø0.897" E3000 - One Piece 4502 AL-M1202 1.18" E2530 / E2550 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 4-ø7mm E3000 - One Piece E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" Main Spindle E3000 - 80,000rpm CAT. No. Machine Side 4503 AIR LINE KIT AL-M1203BS2 E3000 - 80,000rpm E4000 E4000 The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator 3 MA ø1.0" ø0.98" ø1.18" Generic Block MS PF1/4 * Sub-plate to be prepared by the end-user to adjust distance between gauge line and spindle flange. Product ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Description Block for BT30 Taper CAT. No. BLC1 Model Price Block for CAT40 Taper HES510 BLC2 GB30 HTS HPS 17.72" 19.29" CAT. No. Model 4503 AL-M1203 BS2 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price Description HTS CAT. No. Model BLC3 SBHS Price HPS Xpeed Block for Haas Machine 5 5 LUBRICATING OIL AIR LINE KIT Special Block for Fanuc Machines Product Description CAT. No. Model BLC4 SBFS Price AIR LINE KIT Superla #9 lubrication oil, available from NSK America, •isChevron highly recommended for use with the above air line kits. PARTS 8 APPLICATION EXAMPLES INDEX 4-p28 6 PARTS Block for Robodrill 7 TECHNICAL DATA 4 HES810 Xpeed 6 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Special Block for Haas Machines Product ø0.897" MS Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) GB40 MA ø1.18" Alarm Buzzer HES810 3 ø1.0" ø0.98" Solenoid Operated Valve 4-ø9 mm 4 and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. ø6 mm Positioning Block 12.60" 11.02" ø0.897" 2 iSpeed3 M Signal (24V) to open/close the Solenoid Valve E3000 - Modular ROTUS SHEENUS neo SONIC CUTTER Compressor Positioning Block ESPERT PRESTO II PF1/4 SHEENUS neo SONIC CUTTER 1 EmaxEVO IMPULSE R3.5mm ø15mm PRESTO II The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and Lubricating Oil (4 oz.) CAT. No. Product Price 7 TECHNICAL DATA Customized Special Block Product Model Description to be designed for your machine CAT. No. — Model — Price Ask for Quotation AA10478 K-211 8 APPLICATION EXAMPLES Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 Product Price INDEX * Order by catalog number. 4-p29 4-p23-29_HPS_A_1407.qxd 14.8.2 10:35 PM ページ 4-p28 “HPS SERIES” POSITIONING BLOCK 4502 CAT. No. Control System Chart EmaxEVO 24V Solenoid Air Valve (not included) ESPERT Air Hose ROTUS 0.79" 1 “HPS SERIES” AIR LINE KIT & OIL IMPULSE AIR LINE KIT AL-M1202 11.81" 10.24" 0.79" impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" ø6 mm 8.66" 6.69" Air Line Kit AL-M1202 / AL-M1203BS2 2 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model 2-ø7mm iSpeed3 ø1.0"/ø0.98" CNC Unit E2530 / E2550 HPS Series 4.7 2" ø0.897" E3000 - One Piece 4502 AL-M1202 1.18" E2530 / E2550 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" 4-ø7mm E3000 - One Piece E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" Main Spindle E3000 - 80,000rpm CAT. No. Machine Side 4503 AIR LINE KIT AL-M1203BS2 E3000 - 80,000rpm E4000 E4000 The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator 3 MA ø1.0" ø0.98" ø1.18" Generic Block MS PF1/4 * Sub-plate to be prepared by the end-user to adjust distance between gauge line and spindle flange. Product ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Description Block for BT30 Taper CAT. No. BLC1 Model Price Block for CAT40 Taper HES510 BLC2 GB30 HTS HPS 17.72" 19.29" CAT. No. Model 4503 AL-M1203 BS2 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Price Description HTS CAT. No. Model BLC3 SBHS Price HPS Xpeed Block for Haas Machine 5 5 LUBRICATING OIL AIR LINE KIT Special Block for Fanuc Machines Product Description CAT. No. Model BLC4 SBFS Price AIR LINE KIT Superla #9 lubrication oil, available from NSK America, •isChevron highly recommended for use with the above air line kits. PARTS 8 APPLICATION EXAMPLES INDEX 4-p28 6 PARTS Block for Robodrill 7 TECHNICAL DATA 4 HES810 Xpeed 6 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 Special Block for Haas Machines Product ø0.897" MS Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) GB40 MA ø1.18" Alarm Buzzer HES810 3 ø1.0" ø0.98" Solenoid Operated Valve 4-ø9 mm 4 and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. ø6 mm Positioning Block 12.60" 11.02" ø0.897" 2 iSpeed3 M Signal (24V) to open/close the Solenoid Valve E3000 - Modular ROTUS SHEENUS neo SONIC CUTTER Compressor Positioning Block ESPERT PRESTO II PF1/4 SHEENUS neo SONIC CUTTER 1 EmaxEVO IMPULSE R3.5mm ø15mm PRESTO II The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and Lubricating Oil (4 oz.) CAT. No. Product Price 7 TECHNICAL DATA Customized Special Block Product Model Description to be designed for your machine CAT. No. — Model — Price Ask for Quotation AA10478 K-211 8 APPLICATION EXAMPLES Lubricating Oil (32 oz.) CAT. No. Model AA10480 K-202 Product Price INDEX * Order by catalog number. 4-p29 4-p30-32_TAPAR_A_120407.qxd 14.5.2 10:42 PM ページ 4-p30 TAPER SHANKS 1 Taper Shanks Dimensions 1 Taper Shanks Dimensions EmaxEVO 30 50 NT30 (M) BT30 SHEENUS neo SONIC CUTTER 0.54" 2 30 0.79" ø1.18" 0.64" 0.08" 0.87" 0.64" 1.91" ø1.0"/ø0.98" ø0.897" (0.67") 2.69" 0.64" 0.64" 1.38" 0.12" ø1.0"/ø0.98" 1.01" ø26 mm E2530 / E2550 E2530 / E2550 ø0.897" E3000 - One Piece Taper : 7/24 1.39" 0.12" 1.39" 0.13" (0.66") 4.01" 4.01" 1.50" iSpeed3 ø39.25 mm ø69.85 mm 1.01" Taper : 7/24 Taper : 7/24 1.91" 0.06" 60 ø25 mm ø69.85 mm Taper : 7/24 E3000 - Modular 1-8UNC (NT50) M24X3 (NT50M) M24X3 ø85 mm ø13 mm 0.64" 60 ø12.5 mm E3000 - One Piece ø31.75 mm ø0.897" ø17.63 mm ø31.75 mm ø38 mm ø46 mm E2530 / E2550 SHEENUS neo SONIC CUTTER 1/2-13UNC (NT30) M12X1.75 (NT30M) iSpeed3 ø1.0"/ø0.98" PRESTO II 0.91" 30 30 30 M12X1.75 E2530 / E2550 IMPULSE NT50 (M) 0.59" 0.31" 2 ROTUS ø40.1 mm PRESTO II ESPERT BT50 ø100 mm IMPULSE 0.63" ROTUS ø17.1 mm ESPERT EmaxEVO 1.39" E3000 - Modular 1.39" 0.31" 5.11" ø1.18" ø1.0"/ø0.98" ø0.897" 5.50" 2.77" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 40 NT40 (M) BT40 30 ø0.897" 0.44" 0.15" 0.15" 30 ø1.18" 1-8UNC M24X3 MS ø25 mm ø69.85 mm ø70.1 mm ø97.5 mm ø91.25 mm 1.01" 60 (ø40.22 mm) ø26.2 mm 30 ø69.85 mm 30 ø69.85 mm ø98.45 mm 0.65" (ø91.85 mm) MS 0.39" ø1.0" ø0.98" 1.18" 30 30 ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA DIN698971 : 1995 1.38" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1.01" ø1.0" ø0.98" ASME B5.50-1994 0.44" 1.18" ø0.897" 3 IT50 60 MA CAT50 ø40.2 mm 3 5/8-11UNC (NT40) M16X2 M16X2 (NT40M) 0.64" ø17 mm 4 Taper : 7/24 1.48" 0.13" 0.62" ø24.95 mm ø44.45 mm 0.64" 60 ø17 mm ø25.37 mm ø44.45 mm ø53 mm HES510 Taper : 7/24 ø63 mm 4 1.39" 0.63" 0.13" 0.75" 1.48" 1.40" HES510 0.75" 4.00" 1.40" 4.01" 1.38" HES810 HES810 0.89" 0.06" 2.57" 3.67" 0.89" 0.89" HSK A63 5 AIR LINE KIT CAT40 IT40 ASME B5.50-1994 30 30 30 0.79" 0.87" ø75 mm ø63 mm ø92 mm ø100 mm ø52 mm INDEX Taper : 7/24 0.63" 0.13" 0.99" 0.75" 1.52" 0.89" 0.63" 0.98" 0.13" 0.75" 2.69" 1.38" 0.90" 1.02" 2.69" 8 APPLICATION EXAMPLES Taper : 7/24 INDEX 1.65" 0.25" 1.26" 1.04" 1.04" 1.14" 1.77" 4-p30 7 30 TECHNICAL DATA ø17 mm ø44.45 mm ø44.7 mm ø56.25 mm ø63.55 mm 0.64" 60 (ø24.54 mm) ø13.9 mm ø44.45 mm ø44.45 mm ø63.5 mm ø56.36 mm 8 APPLICATION EXAMPLES 30 30 M16X2 5/8-11UNC ø63 mm 30 TECHNICAL DATA PARTS 0.15" 0.15" 0.73" 60 7 0.71" 0.28" 30 6 0.79" 0.44" 0.28" ø24.5 mm PARTS 5 AIR LINE KIT HSK A100 DIN698971 : 1995 0.44" Xpeed HSK A100 HSK A63 0.73" 0.63" 6 HPS 0.20" 3.64" ø48 mm Xpeed (0.90") 2.57" 0.63" 1.06" 0.89" ø55 mm HPS HTS Taper : 7/24 Taper : 7/24 0.08" 0.98" 0.71" HTS 1.73" 0.39" 1.73" 1.97" 4-p31 4-p30-32_TAPAR_A_120407.qxd 14.5.2 10:42 PM ページ 4-p30 TAPER SHANKS 1 Taper Shanks Dimensions 1 Taper Shanks Dimensions EmaxEVO 30 50 NT30 (M) BT30 SHEENUS neo SONIC CUTTER 0.54" 2 30 0.79" ø1.18" 0.64" 0.08" 0.87" 0.64" 1.91" ø1.0"/ø0.98" ø0.897" (0.67") 2.69" 0.64" 0.64" 1.38" 0.12" ø1.0"/ø0.98" 1.01" ø26 mm E2530 / E2550 E2530 / E2550 ø0.897" E3000 - One Piece Taper : 7/24 1.39" 0.12" 1.39" 0.13" (0.66") 4.01" 4.01" 1.50" iSpeed3 ø39.25 mm ø69.85 mm 1.01" Taper : 7/24 Taper : 7/24 1.91" 0.06" 60 ø25 mm ø69.85 mm Taper : 7/24 E3000 - Modular 1-8UNC (NT50) M24X3 (NT50M) M24X3 ø85 mm ø13 mm 0.64" 60 ø12.5 mm E3000 - One Piece ø31.75 mm ø0.897" ø17.63 mm ø31.75 mm ø38 mm ø46 mm E2530 / E2550 SHEENUS neo SONIC CUTTER 1/2-13UNC (NT30) M12X1.75 (NT30M) iSpeed3 ø1.0"/ø0.98" PRESTO II 0.91" 30 30 30 M12X1.75 E2530 / E2550 IMPULSE NT50 (M) 0.59" 0.31" 2 ROTUS ø40.1 mm PRESTO II ESPERT BT50 ø100 mm IMPULSE 0.63" ROTUS ø17.1 mm ESPERT EmaxEVO 1.39" E3000 - Modular 1.39" 0.31" 5.11" ø1.18" ø1.0"/ø0.98" ø0.897" 5.50" 2.77" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 40 NT40 (M) BT40 30 ø0.897" 0.44" 0.15" 0.15" 30 ø1.18" 1-8UNC M24X3 MS ø25 mm ø69.85 mm ø70.1 mm ø97.5 mm ø91.25 mm 1.01" 60 (ø40.22 mm) ø26.2 mm 30 ø69.85 mm 30 ø69.85 mm ø98.45 mm 0.65" (ø91.85 mm) MS 0.39" ø1.0" ø0.98" 1.18" 30 30 ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA DIN698971 : 1995 1.38" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1.01" ø1.0" ø0.98" ASME B5.50-1994 0.44" 1.18" ø0.897" 3 IT50 60 MA CAT50 ø40.2 mm 3 5/8-11UNC (NT40) M16X2 M16X2 (NT40M) 0.64" ø17 mm 4 Taper : 7/24 1.48" 0.13" 0.62" ø24.95 mm ø44.45 mm 0.64" 60 ø17 mm ø25.37 mm ø44.45 mm ø53 mm HES510 Taper : 7/24 ø63 mm 4 1.39" 0.63" 0.13" 0.75" 1.48" 1.40" HES510 0.75" 4.00" 1.40" 4.01" 1.38" HES810 HES810 0.89" 0.06" 2.57" 3.67" 0.89" 0.89" HSK A63 5 AIR LINE KIT CAT40 IT40 ASME B5.50-1994 30 30 30 0.79" 0.87" ø75 mm ø63 mm ø92 mm ø100 mm ø52 mm INDEX Taper : 7/24 0.63" 0.13" 0.99" 0.75" 1.52" 0.89" 0.63" 0.98" 0.13" 0.75" 2.69" 1.38" 0.90" 1.02" 2.69" 8 APPLICATION EXAMPLES Taper : 7/24 INDEX 1.65" 0.25" 1.26" 1.04" 1.04" 1.14" 1.77" 4-p30 7 30 TECHNICAL DATA ø17 mm ø44.45 mm ø44.7 mm ø56.25 mm ø63.55 mm 0.64" 60 (ø24.54 mm) ø13.9 mm ø44.45 mm ø44.45 mm ø63.5 mm ø56.36 mm 8 APPLICATION EXAMPLES 30 30 M16X2 5/8-11UNC ø63 mm 30 TECHNICAL DATA PARTS 0.15" 0.15" 0.73" 60 7 0.71" 0.28" 30 6 0.79" 0.44" 0.28" ø24.5 mm PARTS 5 AIR LINE KIT HSK A100 DIN698971 : 1995 0.44" Xpeed HSK A100 HSK A63 0.73" 0.63" 6 HPS 0.20" 3.64" ø48 mm Xpeed (0.90") 2.57" 0.63" 1.06" 0.89" ø55 mm HPS HTS Taper : 7/24 Taper : 7/24 0.08" 0.98" 0.71" HTS 1.73" 0.39" 1.73" 1.97" 4-p31 4-p30-32_TAPAR_A_120407.qxd 14.5.2 10:42 PM ページ 4-p32 TAPER SHANKS 1 1 Taper Shanks Dimensions EmaxEVO EmaxEVO IMPULSE ST32 PRESTO II ST32 ESPERT ROTUS R8 ESPERT ROTUS IMPULSE R8 PRESTO II SHEENUS neo SONIC CUTTER SHEENUS neo SONIC CUTTER 2 0.10" 7/16-20 UNF 0.16" ø12 mm ø24.12 mm ø31.75 mm E2530 / E2550 ø63 mm ø1.0"/ø0.98" iSpeed3 ø32 mm E2530 / E2550 ø63 mm iSpeed3 2 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular 0.13" 1.81" 2.36" 4.17" 1.94" 4.00" 5.94" E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 4-p32 4-p33 4-p30-32_TAPAR_A_120407.qxd 14.5.2 10:42 PM ページ 4-p32 TAPER SHANKS 1 1 Taper Shanks Dimensions EmaxEVO EmaxEVO IMPULSE ST32 PRESTO II ST32 ESPERT ROTUS R8 ESPERT ROTUS IMPULSE R8 PRESTO II SHEENUS neo SONIC CUTTER SHEENUS neo SONIC CUTTER 2 0.10" 7/16-20 UNF 0.16" ø12 mm ø24.12 mm ø31.75 mm E2530 / E2550 ø63 mm ø1.0"/ø0.98" iSpeed3 ø32 mm E2530 / E2550 ø63 mm iSpeed3 2 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular 0.13" 1.81" 2.36" 4.17" 1.94" 4.00" 5.94" E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX 4-p32 4-p33 4-p34-38_Xpeed_A_1408.qxd 14.8.2 7:21 PM ページ 4-p34 AIR BEARING SPINDLE Xpeed Series Air Turbine 1 1 EmaxEVO EmaxEVO Xpeed1600 ESPERT ROTUS IMPULSE ROTUS IMPULSE 160,000 min-1(rpm) Output : 56W PRESTO II SHEENUS neo SONIC CUTTER ESPERT PRESTO II SHEENUS neo SONIC CUTTER Outside Diameter ø1.57"(ø40 mm) 2 2 iSpeed3 iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular Xpeed1200 ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm 120,000 min-1(rpm) Output : 192W E4000 3 E4000 Outside Diameter ø2.56"(ø65 mm) 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 AIR BEARING HES810 HTS HPS Xpeed 5 AIR LINE KIT Xpeed1600 Xpeed1200 • • 6 PARTS 7 • 160,000 min (rpm) 120,000 min-1(rpm) -1 Output 56W Output 192W 8 HTS Nozzle Air Air HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Spindle Xpeed Series Connection Drawing The Xpeed Series motor and spindle require dry, clean, regulated air. Please refer to the drawing for proper components. INDEX 8 Nozzle Air Air APPLICATION EXAMPLES INDEX Xpeed Series 4-p34 HES510 HES810 Ideal for extremely high precision, small diameter machining applications. Air bearings use compressed air blown into a small gap between the spindle and the bearing surface. The spindle floats on an even cushion of compressed air. This non-contact type of bearing means the spindle has a very long service life because of low friction and wear ; it also means that the spindle generates almost no heat or vibration. The spindle and bearing are finished with a very high-accuracy process to ensure extremely low vibration and very high rotating accuracy. TECHNICAL DATA APPLICATION EXAMPLES Principle of Air Bearing Xpeed Series Air Line Kit AL-A0611 (Refer to 4-p38 in detail) Compressor 4-p35 4-p34-38_Xpeed_A_1408.qxd 14.8.2 7:21 PM ページ 4-p34 AIR BEARING SPINDLE Xpeed Series Air Turbine 1 1 EmaxEVO EmaxEVO Xpeed1600 ESPERT ROTUS IMPULSE ROTUS IMPULSE 160,000 min-1(rpm) Output : 56W PRESTO II SHEENUS neo SONIC CUTTER ESPERT PRESTO II SHEENUS neo SONIC CUTTER Outside Diameter ø1.57"(ø40 mm) 2 2 iSpeed3 iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular Xpeed1200 ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm 120,000 min-1(rpm) Output : 192W E4000 3 E4000 Outside Diameter ø2.56"(ø65 mm) 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 AIR BEARING HES810 HTS HPS Xpeed 5 AIR LINE KIT Xpeed1600 Xpeed1200 • • 6 PARTS 7 • 160,000 min (rpm) 120,000 min-1(rpm) -1 Output 56W Output 192W 8 HTS Nozzle Air Air HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA Spindle Xpeed Series Connection Drawing The Xpeed Series motor and spindle require dry, clean, regulated air. Please refer to the drawing for proper components. INDEX 8 Nozzle Air Air APPLICATION EXAMPLES INDEX Xpeed Series 4-p34 HES510 HES810 Ideal for extremely high precision, small diameter machining applications. Air bearings use compressed air blown into a small gap between the spindle and the bearing surface. The spindle floats on an even cushion of compressed air. This non-contact type of bearing means the spindle has a very long service life because of low friction and wear ; it also means that the spindle generates almost no heat or vibration. The spindle and bearing are finished with a very high-accuracy process to ensure extremely low vibration and very high rotating accuracy. TECHNICAL DATA APPLICATION EXAMPLES Principle of Air Bearing Xpeed Series Air Line Kit AL-A0611 (Refer to 4-p38 in detail) Compressor 4-p35 4-p34-38_Xpeed_A_1408.qxd 14.8.2 7:22 PM ページ 4-p36 “ABS SERIES” SPINDLE AIR BEARING SPINDLE 1 COOLANT “ SERIES” Xpeed Series can be used in conjunction with water or oil based coolants. “Xpeed SERIES” SPINDLE Dimensions shown on this page are Note : all in metric (mm). Please divide them by 25.4 for conversion to inch. COOLANT 1 EmaxEVO ESPERT EmaxEVO CAT. No. 1855 Xpeed1600 160,000 min-1(rpm) O. D. ø1.57"(ø40 mm)

CAT. No. 1854 Xpeed1200 120,000 min-1(rpm) O. D. ø2.56"(ø65 mm)

ROTUS ROTUS IMPULSE 4-ø5.6 through hole 4-ø9.5 head depth 5.5 8-ø6.5 head depth 3.5 E2530 / E2550 ø0.897" (8.7) E3000 - One Piece 18.5 8 35.2 E3000 - Modular 17 5˚ ø65 .5˚ ) E2530 / E2550 (67 - PCD 52 87. Be ø1.0"/ø0.98" E2530 / E2550 67.5˚ (16.6) 9.8 10 112.7 ø0.897" E3000 - One Piece (61.4) 90 28.6 (28.5) 49 2 iSpeed3 90˚ (31.5) 17.5 Br Br (62 ø1.0"/ø0.98" Exhaust Air ° 25 T E2530 / E2550 ø65 00.01 90˚ ø39.8 PCD 29.5 0 ø40 -0.025 ø55 PCD 47 ø39 ø10.8 Be B Be 20˚ 27.5˚ Be ˚ 25 t iSpeed3 T SHEENUS neo SONIC CUTTER 67.5˚ us (22.5˚) 2 PRESTO II 45˚ ha Ex r Ai ˚ 45 Exh Air 90˚ 90˚ Exhaust Air t aus .5˚ ) 22.5˚ SHEENUS neo SONIC CUTTER ø88 PCD 75 ø60 ø15.2 PRESTO II IMPULSE Stepped Test Bar (Standard Equipment) Stepped Test Bar (Standard Equipment) 8-ø3.5 through hole E3000 - Modular (20) 126.4 ø1.18" ø1.18" < Specifications > E3000 - 80,000rpm Spindle Accuracy : Within 1 µm E4000 Standard Size Collet (CHA-4.0AA) : ø4.0 mm Proper Air Pressure for Air Bearing : 87 PSI ø1.0" ø0.98" Air Consumption for Air Bearing : 1.41 CFM ø1.18" Proper Air Pressure for Air Turbine : 22~65 PSI MS Air Consumption for Air Turbine : 5.65 CFM ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Bearing Load Capacity : Radial : Less than 15N, Thrust : Less than 25N 1.8 M5 bolt (4 locations, 90˚ Angle, PCD75) 60 1.5 50 Torque (cN.m) 40 0.9 30 0.6 20 0.3 0 0.0 Useable Max. Diameter of Grindstone : Less than ø2.0 mm (For ø4.0 mm shank) 0 Hose Diameter : Bearing supply ø4 mm (2 locations) 40 80 120 160 Others : Detection of Rotation Speed Mark 5 150 Torque 65PSI Torque 22PSI Output 65PSI Output 22PSI 3 Air Consumption for Air Turbine : 10.60 CFM 4.0 100 2.0 50 ø0.897" (Bearing Air supply pressure 87 PSI) 0 0.0 Useable Max. Diameter of Grindstone : Less than ø2.0 mm (For ø4.0 mm shank) 0 30 60 90 120 Turbine Air supply ø6 mm (2 locations) Torque 75PSI Torque 35PSI Output 75PSI Output 35PSI ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HES810 < Optional > HTS < Optional > Collet (CHA-[][]AA) : ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) HPS Collet (CHK-[][]AA) : ø3.0 mm, ø1/8", ø4.0 mm, ø6.0 mm, ø1/4" (See Page 6-p3 for details) CAT. No. 1855 ø1.0" ø0.98" 4 Speed { x 103 min-1(rpm) } Break Air supply ø6 mm (2 locations) Others : Detection of Rotation Speed Mark Model Xpeed1600 6 PARTS 7 6.0 Hose Diameter : Bearing supply ø4 mm (2 locations) Speed { x 103 min-1(rpm) } Turbine Air supply ø6 mm (2 locations) Xpeed AIR LINE KIT Proper Air Pressure for Air Turbine : 35~75 PSI 10 HES810 HPS Air Consumption for Air Bearing : 2.83 CFM Bearing Load Capacity : Radial : Less than 25N, Thrust : Less than 70N (Bearing Air supply pressure 87 PSI) 200 MA Proper Air Pressure for Air Bearing : 87 PSI 1.2 8.0 Bearing Type : Static Air Bearing Output (W) M3 bolt (8 locations, 45˚ Angle, PDC47) ø0.897" HTS E4000 • Torque & Output Power Characteristic Main body mount method : Flange mounting method, MA HES510 Standard Size Collet (CHK-4.0AA) : ø4.0 mm • Torque & Output Power Characteristic Main body mount method : Flange mounting method, Bearing Type : Static Air Bearing 4 E3000 - 80,000rpm Spindle Accuracy : Within 1 µm Torque (cN.m) 3 ø1.0"/ø0.98" ø0.897" < Specifications > Output (W) ø1.0"/ø0.98" ø0.897" ESPERT Standard Equipment · Accessories Speed 160,000 min-1(rpm) Max. Output 56W Weight 1 lb. 2.34 oz. Xpeed 5 Price Call For Details. (Factory Order) • Collet ø4.0 mm (CHA-4.0AA) • Collet Nut (CHN-3A) • ø4 mm Hose (transparent 6 ft) : 1 pc. • ø6 mm Hose (blue 6 ft) : 1 pc. • ø6 mm Plug : 2 pcs. • ø4 mm Plug : 2 pcs. • Stepped Test Bar (ø2.0 mm x ø4.0 mm x 34L) : 1 pc. • Bar Wrench (K-277) : 1 pc. • Torque Wrench (10 mm) : 1 pc. • Allen Wrench (2 mm) : 1 pc. • Hexagon Socket Button Head Bolt (M3 x 5L) : 1 pc. • Gasket (for M3) : 1 pc. CAT. No. Model Speed Max. Output Weight 1854 Xpeed1200 120,000 min-1(rpm) 192W 5 lb. 1.13 oz. Price AIR LINE KIT Call For Details. 6 (Factory Order) PARTS Standard Equipment · Accessories TECHNICAL DATA • Collet ø4.0 mm (CHK-4.0AA) • Collet Nut (K-265A) • ø6 mm Hose (transparent 6 ft) : 1 pc. • ø6 mm Hose (blue 6 ft) : 1 pc. • ø6 mm Plug : 6 pcs. • Stepped Test Bar (ø2.0 mm x ø4.0 mm x 34L) : 1 pc. • Wrench (12 x 14) : 1 pc. • Torque Wrench (14 mm) : 1 pc. 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES Caution INDEX •• •• 4-p36 *Call NSK America at 800-585-4675 for the correct Xpeed Spindle for your machines builder and model. INDEX Air bearing spindles require clean dry air for proper operation. Never rotate the spindle, change cutting tools or collet without supplying clean, dry air to the bearing surfaces. Always supply clean, dry air to the bearing surfaces even when the spindle is not being rotated. Do not start work process until after stable rotation has been established and verified. * Order by catalog number. 4-p37 4-p34-38_Xpeed_A_1408.qxd 14.8.2 7:22 PM ページ 4-p36 “ABS SERIES” SPINDLE AIR BEARING SPINDLE 1 COOLANT “ SERIES” Xpeed Series can be used in conjunction with water or oil based coolants. “Xpeed SERIES” SPINDLE Dimensions shown on this page are Note : all in metric (mm). Please divide them by 25.4 for conversion to inch. COOLANT 1 EmaxEVO ESPERT EmaxEVO CAT. No. 1855 Xpeed1600 160,000 min-1(rpm) O. D. ø1.57"(ø40 mm)

CAT. No. 1854 Xpeed1200 120,000 min-1(rpm) O. D. ø2.56"(ø65 mm)

ROTUS ROTUS IMPULSE 4-ø5.6 through hole 4-ø9.5 head depth 5.5 8-ø6.5 head depth 3.5 E2530 / E2550 ø0.897" (8.7) E3000 - One Piece 18.5 8 35.2 E3000 - Modular 17 5˚ ø65 .5˚ ) E2530 / E2550 (67 - PCD 52 87. Be ø1.0"/ø0.98" E2530 / E2550 67.5˚ (16.6) 9.8 10 112.7 ø0.897" E3000 - One Piece (61.4) 90 28.6 (28.5) 49 2 iSpeed3 90˚ (31.5) 17.5 Br Br (62 ø1.0"/ø0.98" Exhaust Air ° 25 T E2530 / E2550 ø65 00.01 90˚ ø39.8 PCD 29.5 0 ø40 -0.025 ø55 PCD 47 ø39 ø10.8 Be B Be 20˚ 27.5˚ Be ˚ 25 t iSpeed3 T SHEENUS neo SONIC CUTTER 67.5˚ us (22.5˚) 2 PRESTO II 45˚ ha Ex r Ai ˚ 45 Exh Air 90˚ 90˚ Exhaust Air t aus .5˚ ) 22.5˚ SHEENUS neo SONIC CUTTER ø88 PCD 75 ø60 ø15.2 PRESTO II IMPULSE Stepped Test Bar (Standard Equipment) Stepped Test Bar (Standard Equipment) 8-ø3.5 through hole E3000 - Modular (20) 126.4 ø1.18" ø1.18" < Specifications > E3000 - 80,000rpm Spindle Accuracy : Within 1 µm E4000 Standard Size Collet (CHA-4.0AA) : ø4.0 mm Proper Air Pressure for Air Bearing : 87 PSI ø1.0" ø0.98" Air Consumption for Air Bearing : 1.41 CFM ø1.18" Proper Air Pressure for Air Turbine : 22~65 PSI MS Air Consumption for Air Turbine : 5.65 CFM ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Bearing Load Capacity : Radial : Less than 15N, Thrust : Less than 25N 1.8 M5 bolt (4 locations, 90˚ Angle, PCD75) 60 1.5 50 Torque (cN.m) 40 0.9 30 0.6 20 0.3 0 0.0 Useable Max. Diameter of Grindstone : Less than ø2.0 mm (For ø4.0 mm shank) 0 Hose Diameter : Bearing supply ø4 mm (2 locations) 40 80 120 160 Others : Detection of Rotation Speed Mark 5 150 Torque 65PSI Torque 22PSI Output 65PSI Output 22PSI 3 Air Consumption for Air Turbine : 10.60 CFM 4.0 100 2.0 50 ø0.897" (Bearing Air supply pressure 87 PSI) 0 0.0 Useable Max. Diameter of Grindstone : Less than ø2.0 mm (For ø4.0 mm shank) 0 30 60 90 120 Turbine Air supply ø6 mm (2 locations) Torque 75PSI Torque 35PSI Output 75PSI Output 35PSI ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HES510 HES810 < Optional > HTS < Optional > Collet (CHA-[][]AA) : ø3.0 mm, ø1/8", ø4.0 mm (See Page 6-p2 for details) HPS Collet (CHK-[][]AA) : ø3.0 mm, ø1/8", ø4.0 mm, ø6.0 mm, ø1/4" (See Page 6-p3 for details) CAT. No. 1855 ø1.0" ø0.98" 4 Speed { x 103 min-1(rpm) } Break Air supply ø6 mm (2 locations) Others : Detection of Rotation Speed Mark Model Xpeed1600 6 PARTS 7 6.0 Hose Diameter : Bearing supply ø4 mm (2 locations) Speed { x 103 min-1(rpm) } Turbine Air supply ø6 mm (2 locations) Xpeed AIR LINE KIT Proper Air Pressure for Air Turbine : 35~75 PSI 10 HES810 HPS Air Consumption for Air Bearing : 2.83 CFM Bearing Load Capacity : Radial : Less than 25N, Thrust : Less than 70N (Bearing Air supply pressure 87 PSI) 200 MA Proper Air Pressure for Air Bearing : 87 PSI 1.2 8.0 Bearing Type : Static Air Bearing Output (W) M3 bolt (8 locations, 45˚ Angle, PDC47) ø0.897" HTS E4000 • Torque & Output Power Characteristic Main body mount method : Flange mounting method, MA HES510 Standard Size Collet (CHK-4.0AA) : ø4.0 mm • Torque & Output Power Characteristic Main body mount method : Flange mounting method, Bearing Type : Static Air Bearing 4 E3000 - 80,000rpm Spindle Accuracy : Within 1 µm Torque (cN.m) 3 ø1.0"/ø0.98" ø0.897" < Specifications > Output (W) ø1.0"/ø0.98" ø0.897" ESPERT Standard Equipment · Accessories Speed 160,000 min-1(rpm) Max. Output 56W Weight 1 lb. 2.34 oz. Xpeed 5 Price Call For Details. (Factory Order) • Collet ø4.0 mm (CHA-4.0AA) • Collet Nut (CHN-3A) • ø4 mm Hose (transparent 6 ft) : 1 pc. • ø6 mm Hose (blue 6 ft) : 1 pc. • ø6 mm Plug : 2 pcs. • ø4 mm Plug : 2 pcs. • Stepped Test Bar (ø2.0 mm x ø4.0 mm x 34L) : 1 pc. • Bar Wrench (K-277) : 1 pc. • Torque Wrench (10 mm) : 1 pc. • Allen Wrench (2 mm) : 1 pc. • Hexagon Socket Button Head Bolt (M3 x 5L) : 1 pc. • Gasket (for M3) : 1 pc. CAT. No. Model Speed Max. Output Weight 1854 Xpeed1200 120,000 min-1(rpm) 192W 5 lb. 1.13 oz. Price AIR LINE KIT Call For Details. 6 (Factory Order) PARTS Standard Equipment · Accessories TECHNICAL DATA • Collet ø4.0 mm (CHK-4.0AA) • Collet Nut (K-265A) • ø6 mm Hose (transparent 6 ft) : 1 pc. • ø6 mm Hose (blue 6 ft) : 1 pc. • ø6 mm Plug : 6 pcs. • Stepped Test Bar (ø2.0 mm x ø4.0 mm x 34L) : 1 pc. • Wrench (12 x 14) : 1 pc. • Torque Wrench (14 mm) : 1 pc. 7 TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES Caution INDEX •• •• 4-p36 *Call NSK America at 800-585-4675 for the correct Xpeed Spindle for your machines builder and model. INDEX Air bearing spindles require clean dry air for proper operation. Never rotate the spindle, change cutting tools or collet without supplying clean, dry air to the bearing surfaces. Always supply clean, dry air to the bearing surfaces even when the spindle is not being rotated. Do not start work process until after stable rotation has been established and verified. * Order by catalog number. 4-p37 4-p34-38_Xpeed_A_1408.qxd 14.8.2 7:22 PM ページ 4-p38 “Xpeed SERIES” AIR LINE KIT 1 CAT. No. 1548 AIR LINE KIT AL-A0611 EmaxEVO •The AL-A0611 is a high filtered Air Line Kit utilizing a *0.01µm micro 0.79" ESPERT ROTUS IMPULSE 4-ø7mm Exterior screw Type * ø6mm 16.93" 15.35" 2 • * PRESTO II SHEENUS neo SONIC CUTTER mist filter system for NRAF-5080 Air Bearing Spindles combined with the NE211 (E3000) Control Unit. This Air Line Kit is highly recommended for use on all Xpeed Series Air Turbine / Air Bearing motor/spindles. Exterior screw Type (Model KK13P-02M by SMC Corporation) ø6mm iSpeed3 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.01 µm) E2530 / E2550 ø1.0"/ø0.98" CAT. No. E2530 / E2550 Model E3000 - One Piece E3000 - Modular 0.79" ø0.897" 0.59" 17.52" 18.70" 0.59" 1548 AL-A0611 Standard Equipment · Accessories • Mist Separator • Micro Mist Separator • Membrane Air Dryer • Regulator • Solenoid Valve • Digital Pressure Switch Price ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4-p38 * Order by catalog number. 5-p1-5_AIRLINEKIT_A_1408.qxd 14.8.1 8:59 PM ページ 1 AIR LINE KIT Compressor FOR HAND WORK / MACHINE SPINDLES Air Motor Air Line Kit 1 EmaxEVO FOR HAND WORK ESPERT ROTUS IMPULSE • AIR LINE KIT AL-H1206 • AIR LINE KIT AL-H1207F PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 • FOOT CONTROL AFC-45 * Use Air Line Kit AL-H1207F, CAT. No. 4507 with this foot control. E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular FOR MACHINE SPINDLES ø1.18" ø1.0"/ø0.98" ø0.897" • AIR LINE KIT AL-C1204 • AIR LINE KIT AL-A1205 E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" • AIR LINE KIT AL-M1202 • AIR LINE KIT AL-A0611 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 • AIR LINE KIT AL-M1203BS2 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 AIR BRANCHING JOINT PARTS 7 • AIR BRANCHING JOINT DJ-6 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 5-p1 5-p1-5_AIRLINEKIT_A_1408.qxd 14.8.1 8:59 PM ページ 5-p2 AIR LINE KIT ESPERT ROTUS FOR MACHINE SPINDLES CAT. No. 4504 The Air Line Kit is designed to trap small amounts of moisture, debris and rust from the incoming air from the compressor. This provides a stable and accurate air supply through the regulator. The lubricator then meters the correct amount of lubricating oil to the air motor and spindle to ensure efficiency and longevity. 9.06" 7.48" 0.79" 4506 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) ø6 mm CAT. No. PF1/4 8.66" 6.69" FOR HAND WORK CAT. No. of debris while the adjustable regulator provides the correct air pressure for cooling and purging. 0.79" AIR LINE KIT AL-H1206 E3000 - One Piece 0.79" 0.79" ø6 mm E3000 - Modular R3.5mm ø15mm ø1.18" ø1.0"/ø0.98" ø0.897" CAT. No. 3 2-ø7mm Tool Holder 1.18" MA 4506 AL-H1206 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. 0.79" Tool Holder PF1/4 CAT. No. 1.18" 4.7 2" 4507 Model ALH1207F 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air Control Valve (CV-05) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Fit to 8 ROTUS CAT. No. Model AF10045 AFC-45 5-p2 Standard Accessories Price 3 MA ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model 4502 AL-M1202 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price 1.18" MA SERIES Every Air Motor MS SERIES Every Air Motor Spindle HTS · HPS SERIES Every Air Motor Spindle 4-ø7mm ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Fit to 4 HES510 HES810 HTS HPS CAT. No. 4503 AIR LINE KIT AL-M1203BS2 (For Air Motors) Xpeed The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator Price ø6 mm PF1/4 Solenoid Operated Valve Alarm Buzzer IM-300 · IM-301 AF10045 FOOT CONTROL AFC-45 * Use Air Line Kit AL-H1207F, CAT. No. 4507 with this Foot Control. E4000 ø0.897" and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model 4503 AL-M1203 BS2 4-ø9 mm CAT. No. E3000 - 80,000rpm impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" ø6 mm APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" ø0.897" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and Air Line Kit (For ø6 mm Hose · Filter Mesh 5 µm) 2-ø7mm (For Air Motors) 2-ø7mm * Supplies smooth, conditioned air flow and automatic lubrication to •ensure stable speed and power. Filter, Lubricator and Regulator can be used to adjust motor speed. •The Adjustable lubrication and air pressure setting provides longevity to •the Air Grinder. compact size allows for portability or stationary mounting. •Its •Unit includes a Tool Holder to store the Rotus Motor. PARTS 7 11.81" 10.24" 8.66" 6.69" 0.79" 6 TECHNICAL DATA AIR LINE KIT AL-M1202 12.60" 11.02" 0.79" 11.81" 10.24" 0.79" R3.5mm ø15mm 8.66" 6.69" 5 E3000 - One Piece PF1/4 NSP-601 · NA45-230 · NA45-400 · NA90-230 This Air Line Kit is designed for use with the AFC-45 Foot Control, CAT. No. AF10045. ø6 mm Xpeed AIR LINE KIT 4502 R3.5mm ø15mm IMPULSE HTS HPS ø1.0"/ø0.98" E2530 / E2550 ø0.897" AIR LINE KIT AL-H1207F (For Rotus System) HES510 HES810 E2530 / E2550 NE273 · NE246 · NE236 NE211 · NE145 · NE145-OP1 4-ø7mm 4.7 2" 4507 CAT. No. iSpeed3 Control Unit Price MS 4 2 ø1.18" Fit to 4.7 2" ø0.897" Model PRESTO II E3000 - Modular CAT. No. Air Line Kit (For ø6 mm Hose · Filter Mesh 5 µm) 8.66" 6.69" E4000 ESPERT SHEENUS neo SONIC CUTTER • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft for the Impulse. PF1/4 E3000 - 80,000rpm 1.18" 11.81" 10.24" smooth air flow and automatic lubrication, ensuring stable • Supplies speed and power. lubrication and air pressure settings provide longevity to • Adjustable the Air Grinder. for grinding and polishing applications. This compact Air Line • Best Kit allows for portability or stationary mounting as well as a carrier 4.7 2" ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Price 2-ø7mm 0.79" 0.79" E2530 / E2550 ø1.18" Standard Equipment · Accessories Fit to ø1.0"/ø0.98" ø1.0" ø0.98" Model 4504 AL-C1204 (Automatic Lubricating Device) iSpeed3 E2530 / E2550 1 EmaxEVO IMPULSE R3.5mm ø15mm PRESTO II 2 The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts ROTUS IMPULSE SHEENUS neo SONIC CUTTER AIR LINE KIT AL-C1204 (For Electric Motors) THE ROLE OF AIR LINE KIT 0.79" 1 EmaxEVO using Air Motors, be sure to install either an NSK Air Line Kit shown below or a similar Air Line Kit system. • When To ensure the longevity of Air Motors and Spindles, proper lubrication and air pressure are very important. Line Kits offered by NAKANISHI are micron filter, regulator / lubricators specially designed to control the • oilThedripAirvolume (3 drops per minute) for maximum efficiency. Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Fit to 17.72" 19.29" Price 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX MA SERIES Every Air Motor MS SERIES Every Air Motor Spindle HPS SERIES Every Air Motor Spindle Foot Control only * Order by catalog number. 5-p3 5-p1-5_AIRLINEKIT_A_1408.qxd 14.8.1 8:59 PM ページ 5-p2 AIR LINE KIT ESPERT ROTUS FOR MACHINE SPINDLES CAT. No. 4504 The Air Line Kit is designed to trap small amounts of moisture, debris and rust from the incoming air from the compressor. This provides a stable and accurate air supply through the regulator. The lubricator then meters the correct amount of lubricating oil to the air motor and spindle to ensure efficiency and longevity. 9.06" 7.48" 0.79" 4506 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) ø6 mm CAT. No. PF1/4 8.66" 6.69" FOR HAND WORK CAT. No. of debris while the adjustable regulator provides the correct air pressure for cooling and purging. 0.79" AIR LINE KIT AL-H1206 E3000 - One Piece 0.79" 0.79" ø6 mm E3000 - Modular R3.5mm ø15mm ø1.18" ø1.0"/ø0.98" ø0.897" CAT. No. 3 2-ø7mm Tool Holder 1.18" MA 4506 AL-H1206 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. 0.79" Tool Holder PF1/4 CAT. No. 1.18" 4.7 2" 4507 Model ALH1207F 4-ø7mm Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air Control Valve (CV-05) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Fit to 8 ROTUS CAT. No. Model AF10045 AFC-45 5-p2 Standard Accessories Price 3 MA ø1.0" ø0.98" Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model 4502 AL-M1202 Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-211) : 1 pc. Price 1.18" MA SERIES Every Air Motor MS SERIES Every Air Motor Spindle HTS · HPS SERIES Every Air Motor Spindle 4-ø7mm ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Fit to 4 HES510 HES810 HTS HPS CAT. No. 4503 AIR LINE KIT AL-M1203BS2 (For Air Motors) Xpeed The AL-M1203BS2 is equipped with 2 (DC+24V) Air Solenoids, a •large capacity filter, large capacity oil reservoir, high flow regulator Price ø6 mm PF1/4 Solenoid Operated Valve Alarm Buzzer IM-300 · IM-301 AF10045 FOOT CONTROL AFC-45 * Use Air Line Kit AL-H1207F, CAT. No. 4507 with this Foot Control. E4000 ø0.897" and a low oil level warning alarm, making this unit ideal for use on CNC machines. This Air Line Kit allows for the operation of 2 Air Motors. Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) CAT. No. Model 4503 AL-M1203 BS2 4-ø9 mm CAT. No. E3000 - 80,000rpm impure substances from the input air supply. The regulator maintains the proper air pressure, and the lubricator ensures proper oil flow to the motor and spindle. This Air Line Kit is wall mountable. 0.79" ø6 mm APPLICATION EXAMPLES INDEX ø1.0"/ø0.98" ø0.897" The AL-M1202 provides simple, automatic conditioning of the air •supplied to NAKANISHI Air Motors. The filter removes water and Air Line Kit (For ø6 mm Hose · Filter Mesh 5 µm) 2-ø7mm (For Air Motors) 2-ø7mm * Supplies smooth, conditioned air flow and automatic lubrication to •ensure stable speed and power. Filter, Lubricator and Regulator can be used to adjust motor speed. •The Adjustable lubrication and air pressure setting provides longevity to •the Air Grinder. compact size allows for portability or stationary mounting. •Its •Unit includes a Tool Holder to store the Rotus Motor. PARTS 7 11.81" 10.24" 8.66" 6.69" 0.79" 6 TECHNICAL DATA AIR LINE KIT AL-M1202 12.60" 11.02" 0.79" 11.81" 10.24" 0.79" R3.5mm ø15mm 8.66" 6.69" 5 E3000 - One Piece PF1/4 NSP-601 · NA45-230 · NA45-400 · NA90-230 This Air Line Kit is designed for use with the AFC-45 Foot Control, CAT. No. AF10045. ø6 mm Xpeed AIR LINE KIT 4502 R3.5mm ø15mm IMPULSE HTS HPS ø1.0"/ø0.98" E2530 / E2550 ø0.897" AIR LINE KIT AL-H1207F (For Rotus System) HES510 HES810 E2530 / E2550 NE273 · NE246 · NE236 NE211 · NE145 · NE145-OP1 4-ø7mm 4.7 2" 4507 CAT. No. iSpeed3 Control Unit Price MS 4 2 ø1.18" Fit to 4.7 2" ø0.897" Model PRESTO II E3000 - Modular CAT. No. Air Line Kit (For ø6 mm Hose · Filter Mesh 5 µm) 8.66" 6.69" E4000 ESPERT SHEENUS neo SONIC CUTTER • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft for the Impulse. PF1/4 E3000 - 80,000rpm 1.18" 11.81" 10.24" smooth air flow and automatic lubrication, ensuring stable • Supplies speed and power. lubrication and air pressure settings provide longevity to • Adjustable the Air Grinder. for grinding and polishing applications. This compact Air Line • Best Kit allows for portability or stationary mounting as well as a carrier 4.7 2" ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Price 2-ø7mm 0.79" 0.79" E2530 / E2550 ø1.18" Standard Equipment · Accessories Fit to ø1.0"/ø0.98" ø1.0" ø0.98" Model 4504 AL-C1204 (Automatic Lubricating Device) iSpeed3 E2530 / E2550 1 EmaxEVO IMPULSE R3.5mm ø15mm PRESTO II 2 The AL-C1204 Air Line Kit is designed to deliver clean, dry air to •Electric Motors via the Control Unit. The filter removes small amounts ROTUS IMPULSE SHEENUS neo SONIC CUTTER AIR LINE KIT AL-C1204 (For Electric Motors) THE ROLE OF AIR LINE KIT 0.79" 1 EmaxEVO using Air Motors, be sure to install either an NSK Air Line Kit shown below or a similar Air Line Kit system. • When To ensure the longevity of Air Motors and Spindles, proper lubrication and air pressure are very important. Line Kits offered by NAKANISHI are micron filter, regulator / lubricators specially designed to control the • oilThedripAirvolume (3 drops per minute) for maximum efficiency. Standard Equipment · Accessories • Air Filter • Air Regulator • Air Pressure Gauge • Lubricator • Solenoid Valve (DC 24V) : 2 pcs. • Buzzer (DC 24V) • Hose for Piping (K-275) : 6 ft • Lubricating Oil (K-202) : 1 pc. Fit to 17.72" 19.29" Price 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX MA SERIES Every Air Motor MS SERIES Every Air Motor Spindle HPS SERIES Every Air Motor Spindle Foot Control only * Order by catalog number. 5-p3 5-p1-5_AIRLINEKIT_A_1408.qxd 14.8.1 8:59 PM ページ 5-p4 AIR LINE KIT AIR LINE KIT AL-A1205 (For Air Bearing Spindles) ROTUS IMPULSE 11.81" 10.24" 0.79" 0.79" SHEENUS neo SONIC CUTTER 2 ø6 mm R3.5mm ø15mm ø6 mm iSpeed3 E2530 / E2550 ø0.897" 8.66" 6.30" E2530 / E2550 PF1/4 • • ø49 mm (ø1.93") • 2-ø7mm CAT. No. 1.18" Model 4505 AL-A1205 4.7 2" E3000 - 80,000rpm air pressure and lubrication. This branching joint is designed to supply even, compressed air and oil for 3 to 6 air motors where installation of individual air kits is not feasible. The intake hose size is ø12 mm and the exhaust hose size is ø6 mm. Please use with the AL-M1203BS2 High Volume, High Capacity Air Line Kit. • E3000 - Modular ø1.0"/ø0.98" ø0.897" •It is essential to run air motors with Air Line Kits to ensure proper Electric Motor Systems that use the NRAF-5080 Air Bearing Spindle and the NE211 (E3000) Control Unit. One output is for the Electric Motor cooling, and the second output is for the Air Bearing operation. This unit is also designed for use on Air Turbine / Air Bearing Motor/Spindles such as the ABT Series. One air output drives the Air Turbine Motor. The other air output drives the Air Bearing Spindle. Always supply air to the Air Bearing before starting the EM-3080 Motor. When stopping the spindle, always stop the motor before removing the air from the Air Bearing Spindle. Always supply air to the Air Bearing Spindle before starting the Air Turbine Motor. When stopping the spindle, always stop the Air Turbine Motor before removing the air from the Air Bearing Spindle. 4-ø7mm Standard Equipment · Accessories Top View • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft 3 Control Unit NE211 Spindle NRAF-5080 0.24" Side View E3000 - Modular ø69 mm (ø2.72") CAT. No. Model Standard Equipment · Accessories AS02051 DJ-6 • Plug (air stopper) : 3 pcs. Price CAT. No. 1548 E4000 3 CAT. No. AIR LINE KIT AL-A0611 (For Air Bearing Spindles) ø6mm ø4 mm • ø6 mm 0.79" 4-ø7mm ø1.18" Reducer • Exterior screw Type * ø1.0" ø0.98" U235406 REDUCER (ø6 - ø4 Adaptor) MS The AL-A0611 is a high filtered Air Line Kit utilizing a *0.01µm micro mist filter system for NRAF-5080 Air Bearing Spindles combined with the NE211 (E3000) Control Unit. This Air Line Kit is highly recommended for use on all Xpeed Series Air Turbine / Air Bearing motor/spindles. Exterior screw Type (Model KK13P-02M by SMC Corporation) CAT. No. Model U235406 Reducer Specifications Price HES510 HES810 16.93" 15.35" HTS ø6mm Air Line Kit (For ø6 mm Hose · Filter Mesh 0.01 µm) CAT. No. 5 Model 1548 AL-A0611 7 8 APPLICATION EXAMPLES 0.79" AIR LINE KIT TECHNICAL DATA 0.59" 17.52" 18.70" 0.59" Standard Equipment · Accessories • Mist Separator • Micro Mist Separator • Membrane Air Dryer • Regulator • Solenoid Valve • Digital Pressure Switch Price Fit to Control Unit NE211 Spindle NRAF-5080 · Xpeed1600 · Xpeed1200 HPS LUBRICATING OIL Xpeed 5 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 Product Price AIR LINE KIT 6 PARTS Lubricating Oil (32 oz.) CAT. No. AA10480 Model Product Price 7 TECHNICAL DATA K-202 8 The following products need Lubricating oil to use the AIR LINE KIT. INDEX APPLICATION EXAMPLES INDEX • ROTUS • IMPULSE 5-p4 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 • ø6 - ø4 mm Adaptor * Xpeed PARTS ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm HES810 6 ø0.897" E3000 - One Piece ø0.897" HES510 HPS E2530 / E2550 MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HTS SHEENUS neo SONIC CUTTER ø1.18" ø1.0" ø0.98" 4 PRESTO II ø1.0"/ø0.98" ø0.897" MS IMPULSE 2 MA ø1.18" ROTUS E2530 / E2550 Price Fit to E4000 ESPERT iSpeed3 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) E3000 - One Piece ø1.18" EmaxEVO 0.31" PRESTO II 0.79" 1 AS02051 AIR BRANCHING JOINT DJ-6 •The AL-A1205 is a dual output dry air, Air Line Kit designed for use on ESPERT ø1.0"/ø0.98" CAT. No. 0.79" 4505 2.17" CAT. No. 2.28" 1 EmaxEVO • MS Series • MA Series • HTS Series • HPS Series * Order by catalog number. 5-p5 5-p1-5_AIRLINEKIT_A_1408.qxd 14.8.1 8:59 PM ページ 5-p4 AIR LINE KIT AIR LINE KIT AL-A1205 (For Air Bearing Spindles) ROTUS IMPULSE 11.81" 10.24" 0.79" 0.79" SHEENUS neo SONIC CUTTER 2 ø6 mm R3.5mm ø15mm ø6 mm iSpeed3 E2530 / E2550 ø0.897" 8.66" 6.30" E2530 / E2550 PF1/4 • • ø49 mm (ø1.93") • 2-ø7mm CAT. No. 1.18" Model 4505 AL-A1205 4.7 2" E3000 - 80,000rpm air pressure and lubrication. This branching joint is designed to supply even, compressed air and oil for 3 to 6 air motors where installation of individual air kits is not feasible. The intake hose size is ø12 mm and the exhaust hose size is ø6 mm. Please use with the AL-M1203BS2 High Volume, High Capacity Air Line Kit. • E3000 - Modular ø1.0"/ø0.98" ø0.897" •It is essential to run air motors with Air Line Kits to ensure proper Electric Motor Systems that use the NRAF-5080 Air Bearing Spindle and the NE211 (E3000) Control Unit. One output is for the Electric Motor cooling, and the second output is for the Air Bearing operation. This unit is also designed for use on Air Turbine / Air Bearing Motor/Spindles such as the ABT Series. One air output drives the Air Turbine Motor. The other air output drives the Air Bearing Spindle. Always supply air to the Air Bearing before starting the EM-3080 Motor. When stopping the spindle, always stop the motor before removing the air from the Air Bearing Spindle. Always supply air to the Air Bearing Spindle before starting the Air Turbine Motor. When stopping the spindle, always stop the Air Turbine Motor before removing the air from the Air Bearing Spindle. 4-ø7mm Standard Equipment · Accessories Top View • Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve • Hose for Piping (K-275) : 6 ft 3 Control Unit NE211 Spindle NRAF-5080 0.24" Side View E3000 - Modular ø69 mm (ø2.72") CAT. No. Model Standard Equipment · Accessories AS02051 DJ-6 • Plug (air stopper) : 3 pcs. Price CAT. No. 1548 E4000 3 CAT. No. AIR LINE KIT AL-A0611 (For Air Bearing Spindles) ø6mm ø4 mm • ø6 mm 0.79" 4-ø7mm ø1.18" Reducer • Exterior screw Type * ø1.0" ø0.98" U235406 REDUCER (ø6 - ø4 Adaptor) MS The AL-A0611 is a high filtered Air Line Kit utilizing a *0.01µm micro mist filter system for NRAF-5080 Air Bearing Spindles combined with the NE211 (E3000) Control Unit. This Air Line Kit is highly recommended for use on all Xpeed Series Air Turbine / Air Bearing motor/spindles. Exterior screw Type (Model KK13P-02M by SMC Corporation) CAT. No. Model U235406 Reducer Specifications Price HES510 HES810 16.93" 15.35" HTS ø6mm Air Line Kit (For ø6 mm Hose · Filter Mesh 0.01 µm) CAT. No. 5 Model 1548 AL-A0611 7 8 APPLICATION EXAMPLES 0.79" AIR LINE KIT TECHNICAL DATA 0.59" 17.52" 18.70" 0.59" Standard Equipment · Accessories • Mist Separator • Micro Mist Separator • Membrane Air Dryer • Regulator • Solenoid Valve • Digital Pressure Switch Price Fit to Control Unit NE211 Spindle NRAF-5080 · Xpeed1600 · Xpeed1200 HPS LUBRICATING OIL Xpeed 5 Lubricating Oil (4 oz.) CAT. No. Model AA10478 K-211 Product Price AIR LINE KIT 6 PARTS Lubricating Oil (32 oz.) CAT. No. AA10480 Model Product Price 7 TECHNICAL DATA K-202 8 The following products need Lubricating oil to use the AIR LINE KIT. INDEX APPLICATION EXAMPLES INDEX • ROTUS • IMPULSE 5-p4 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 • ø6 - ø4 mm Adaptor * Xpeed PARTS ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm HES810 6 ø0.897" E3000 - One Piece ø0.897" HES510 HPS E2530 / E2550 MA ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" HTS SHEENUS neo SONIC CUTTER ø1.18" ø1.0" ø0.98" 4 PRESTO II ø1.0"/ø0.98" ø0.897" MS IMPULSE 2 MA ø1.18" ROTUS E2530 / E2550 Price Fit to E4000 ESPERT iSpeed3 Air Line Kit (For ø6 mm Hose · Filter Mesh 0.3 µm) E3000 - One Piece ø1.18" EmaxEVO 0.31" PRESTO II 0.79" 1 AS02051 AIR BRANCHING JOINT DJ-6 •The AL-A1205 is a dual output dry air, Air Line Kit designed for use on ESPERT ø1.0"/ø0.98" CAT. No. 0.79" 4505 2.17" CAT. No. 2.28" 1 EmaxEVO • MS Series • MA Series • HTS Series • HPS Series * Order by catalog number. 5-p5 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 1 PARTS 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II PRESTO II SHEENUS neo SONIC CUTTER SHEENUS neo SONIC CUTTER 2 2 iSpeed3 iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Index HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4 HES510 HES810 HTS Collet .................................................................................................. 6-p2~6-p6 Collet Nut ............................................................................................ 6-p6~6-p7 Motor Cord ......................................................................................... 6-p8~6-p9 Foot Pedal & Handpiece Stand etc. ............................................................. 6-p9 Parts for Air Turbine & FINE BELT SANDER ............................................... 6-p10 Oil, Grease & Silencer ................................................................................. 6-p11 Hose ............................................................................................... 6-p12~6-p13 Metal Fitting, Filter Joint & Grindstone Flange etc. .................................... 6-p13 Special Arbor .................................................................................. 6-p14~6-p15 Wrench ............................................................................................ 6-p16~6-p17 Grip Ring, Split Bushing ................................................................ 6-p18~6-p19 HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 6-p1 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 1 PARTS 1 1 EmaxEVO EmaxEVO ESPERT ESPERT ROTUS ROTUS IMPULSE IMPULSE PRESTO II PRESTO II SHEENUS neo SONIC CUTTER SHEENUS neo SONIC CUTTER 2 2 iSpeed3 iSpeed3 E2530 / E2550 E2530 / E2550 ø1.0"/ø0.98" ø1.0"/ø0.98" E2530 / E2550 E2530 / E2550 ø0.897" ø0.897" E3000 - One Piece E3000 - One Piece E3000 - Modular E3000 - Modular ø1.18" ø1.18" ø1.0"/ø0.98" ø0.897" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E3000 - 80,000rpm E4000 E4000 3 3 MA MA ø0.897" ø0.897" ø1.0" ø0.98" ø1.0" ø0.98" ø1.18" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 Index HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 4 HES510 HES810 HTS Collet .................................................................................................. 6-p2~6-p6 Collet Nut ............................................................................................ 6-p6~6-p7 Motor Cord ......................................................................................... 6-p8~6-p9 HPS Xpeed 5 Foot Pedal & Handpiece Stand etc. ............................................................. 6-p9 Parts for Air Turbine & FINE BELT SANDER ............................................... 6-p10 Oil, Grease & Silencer ................................................................................. 6-p11 Hose ............................................................................................... 6-p12~6-p13 Metal Fitting, Filter Joint & Grindstone Flange etc. .................................... 6-p13 Special Arbor .................................................................................. 6-p14~6-p15 AIR LINE KIT Wrench ............................................................................................ 6-p16~6-p17 Grip Ring, Split Bushing ................................................................ 6-p18~6-p19 APPLICATION EXAMPLES 6 PARTS 7 TECHNICAL DATA 8 INDEX 6-p1 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 6-p2 < PARTS > COLLET ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS 0.67" Fit to AMS-1200 · AMS-1210 · AMS-1500 · AMS-1501 · AMS-250 · ABS-800 · iSpeed3 MS-19 · MS-20 · MS-22 · MSS-19 · MSS-20 · MSS-22 · NR-3080S · NRA-5080 · NR-320 PS20-70/120 · PS20S-70 · PSA23-80/130 · PSA23S-80 · PMS-3020A · BANTAM 250 PLANET 850· PLANET 1500 · PLANET 2000 · SMS · HTS · EM20-S6000 · EM25-S6000 EMS-3060A · NRR3060-QC · HES810 · HPS500 · Xpeed1600 CAT. No. 91405 91406 91407 RA11805 RA11804 RA11806 RA11807 RA11808 RA11803 RA11815 RA11814 RA11809 91417 RA11810 RA11822 RA11811 RA11831 91422 91423 RA11812 RA11824 RA11821 RA11826 91427 RA11828 RA11829 RA11813 91494 RA11830 RA11818 91496 91432 91433 91434 RA11823 91436 91437 91438 91439 RA11819 91495 Model CHA-0.5 CHA-0.6 CHA-0.7 CHA-0.8 CHA-0.9 CHA-1.0 CHA-1.1 CHA-1.2 CHA-1.3 CHA-1.4 CHA-1.5 CHA-1.6 CHA-1.7 CHA-1.8 CHA-1.9 CHA-2.0 CHA-2.1 CHA-2.2 CHA-2.3 CHA-2.35 CHA-2.4 CHA-2.5 CHA-2.6 CHA-2.7 CHA-2.8 CHA-2.9 CHA-3.0 CHA-3.0AA* CHA-3.1 CHA-3.175 CHA-3.175AA* CHA-3.2 CHA-3.3 CHA-3.4 CHA-3.5 CHA-3.6 CHA-3.7 CHA-3.8 CHA-3.9 CHA-4.0 CHA-4.0AA* Inside Diameter d ø0.5 ø0.6 ø0.7 ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø3.0 ø3.1 ø1/8" ø1/8" ø3.2 ø3.3 ø3.4 ø3.5 ø3.6 ø3.7 ø3.8 ø3.9 ø4.0 ø4.0 Price Model CHC-1.6 CHC-2.35 CHC-3.0 CHC-3.175 Inside Diameter d ø1.6 ø2.35 ø3.0 ø1/8" Price 1.46" CAT. No. Model Inside Diameter d 91730 91793 CHF-3.0 CHF-3.175 ø3.0 ø1/8" Price CHG Group d 1.54" Fit to HG-200 · NR-301 · EHG-400 Fit to NR-301 CAT. No. RA11777 RA11778 RA11766 RA11780 RA11771 RA11781 RA11772 RA11452 RA11697 RA11698 RA11709 RA11773 RA11714 1.38" Model CHG-1.0 CHG-1.5 CHG-1.6 CHG-2.0 CHG-2.35 CHG-2.5 CHG-3.0 CHG-3.175 CHG-4.0 CHG-4.76 CHG-5.0 CHG-6.0 CHG-6.35 Inside Diameter d ø1.0 ø1.5 ø1.6 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" ø4.0 ø4.76 ø5.0 ø6.0 ø1/4" Price CHH Group PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 6-p2 d 1.33" Fit to NRR-2651 · NRR-3060 · NR40-5100 ATC CAT. No. 92820 92830 92893 92840 Model CHB-2.0 CHB-3.0 CHB-3.175 CHB-4.0 Inside Diameter d ø2.0 ø3.0 ø1/8" ø4.0 Price Fit to IH-300 · IR-310 · EHL-401 · EHR-401 · EHR-500 · VH-E CAT. No. RE11729 90615 RE11659 RE11734 RE11625 90625 RE11739 RE11630 Model CHH-1.0 CHH-1.5 CHH-1.6 CHH-2.0 CHH-2.35 CHH-2.5 CHH-3.0 CHH-3.175 Fit to : K-265 : CHN-B Inside Diameter d ø1.0 ø1.5 ø1.6 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" Model CHK-5.9 CHK-6.0 CHK-6.0AA* CHK-6.35 CHK-6.35AA* Inside Diameter d ø5.9 ø6.0 ø6.0 ø1/4" ø1/4" Price 1 EmaxEVO ESPERT Fit to ABS-70P · ABS-400 · AMX-50 · AMX-65 (1/1 Ratio) · AMX-80 (1/1 Ratio) · EM30-S6000 · EMA-3020K EMS-3041 · EMS-3045 · EMS-3052 · EMS-3056 · EMS-3046-J4 · EMS-3057-J4 · EMS-6040 EMS-6040K · EMS-3060K · EMSF-3060K · EMR-3008K · MS-23 · MSS-25 · MSSH-25 · MST-23 MSST-23 · NR-2351 · NR-2532 · NR-H2532 · NR-2551 · NR-H2551 · NR-303 · NR-303P · NR-311 NR-3060S · NR-403E · NR-453E · NRAF-5080 · NRL-300 · NRL-300E · NRR3060-QC · NR4040-AQC NRR4040-QC · PMA-3013K · PMR-3005K · PMS-3020K · PS23-80/130 · PS23S-80 · PSA25-90/140 PSA25S-90 · PSA30-100/160 · PSA30S-100 · PSA35-120/180 · PSA35S-120 · RAS-101 · RAS-151E RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · FG-01S · PLANET 400 · HES510 · HPS250 · Xpeed1200 *High precision type Fit to NR-3080 CHB Group d CAT. No. 90416 90492 90430 90493 0.79" CAT. No. PL42697 PL42686 91600 PL42675 91601 Fit to NR-302 · ENR-302 Fit to IC-300 · KC-300 · EIC-300 · EKC-300 · IC-E · KC-E d 5 6 d 0.68" CHF Group Xpeed AIR LINE KIT d Fit to : K-263 : CHN-A CHK Group Price CAT. No. PL42665 91506 PL42667 PL42668 PL42692 PL42691 PL42699 PL42682 PL42693 PL42700 PL42695 PL42696 PL42709 PL42698 91519 PL42672 PL42681 PL42662 91523 PL42690 PL42710 PL42663 PL42712 PL42617 PL42694 PL42689 PL42669 91597 PL42670 PL42685 91598 91532 PL42705 PL42701 PL42707 PL42706 91537 PL42702 91539 PL42678 91599 PL42711 91542 PL42671 PL42673 PL42687 91546 PL42674 PL42680 91548 91549 PL42676 PL42677 PL42708 91553 PL42703 PL42704 PL42679 91557 91558 Inside Diameter d Model ø0.5 CHK-0.5 ø0.6 CHK-0.6 ø0.7 CHK-0.7 ø0.8 CHK-0.8 ø0.9 CHK-0.9 ø1.0 CHK-1.0 ø1.1 CHK-1.1 ø1.2 CHK-1.2 ø1.3 CHK-1.3 ø1.4 CHK-1.4 ø1.5 CHK-1.5 ø1.6 CHK-1.6 ø1.7 CHK-1.7 ø1.8 CHK-1.8 ø1.9 CHK-1.9 ø2.0 CHK-2.0 ø2.1 CHK-2.1 ø2.2 CHK-2.2 ø2.3 CHK-2.3 CHK-2.35 ø2.35 CHK-2.4 ø2.4 CHK-2.5 ø2.5 CHK-2.6 ø2.6 CHK-2.7 ø2.7 CHK-2.8 ø2.8 CHK-2.9 ø2.9 CHK-3.0 ø3.0 CHK-3.0AA* ø3.0 CHK-3.1 ø3.1 CHK-3.175 ø1/8" CHK-3.175AA* ø1/8" CHK-3.2 ø3.2 CHK-3.3 ø3.3 CHK-3.4 ø3.4 CHK-3.5 ø3.5 CHK-3.6 ø3.6 CHK-3.7 ø3.7 CHK-3.8 ø3.8 CHK-3.9 ø3.9 CHK-4.0 ø4.0 CHK-4.0AA* ø4.0 CHK-4.1 ø4.1 CHK-4.2 ø4.2 CHK-4.3 ø4.3 CHK-4.4 ø4.4 ø4.5 CHK-4.5 ø4.6 CHK-4.6 ø4.7 CHK-4.7 ø4.76 CHK-4.76 ø4.8 CHK-4.8 ø4.9 CHK-4.9 ø5.0 CHK-5.0 CHK-5.1 ø5.1 CHK-5.2 ø5.2 CHK-5.3 ø5.3 CHK-5.4 ø5.4 CHK-5.5 ø5.5 CHK-5.6 ø5.6 CHK-5.7 ø5.7 CHK-5.8 ø5.8 Price Old code number CHL Group d ROTUS IMPULSE 0.98" Fit to : CHN-L ø0.59" ESPERT d CHC Group ø0.41" 1 EmaxEVO ø0.29" CHA Group Fit to AMX-65 (1/3 · 1/9 Ratio) · PSA40-140/200 · PSA40S-140 · PSA45-160/220 PSA45S-160 · PSA50-180/240 · PSA50S-180 CAT. No. 91610 91615 91620 91692 91625 91630 91693 91635 91640 91645 91650 91655 91660 91696 91665 91670 91675 91680 Model CHL-1.0 CHL-1.5 CHL-2.0 CHL-2.35 CHL-2.5 CHL-3.0 CHL-3.175 CHL-3.5 CHL-4.0 CHL-4.5 CHL-5.0 CHL-5.5 CHL-6.0 CHL-6.35 CHL-6.5 CHL-7.0 CHL-7.5 CHL-8.0 Inside Diameter d ø1.0 ø1.5 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" ø3.5 ø4.0 ø4.5 ø5.0 ø5.5 ø6.0 ø1/4" ø6.5 ø7.0 ø7.5 ø8.0 Price PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use * Order by catalog number. 6-p3 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 6-p2 < PARTS > COLLET ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS 0.67" Fit to AMS-1200 · AMS-1210 · AMS-1500 · AMS-1501 · AMS-250 · ABS-800 · iSpeed3 MS-19 · MS-20 · MS-22 · MSS-19 · MSS-20 · MSS-22 · NR-3080S · NRA-5080 · NR-320 PS20-70/120 · PS20S-70 · PSA23-80/130 · PSA23S-80 · PMS-3020A · BANTAM 250 PLANET 850· PLANET 1500 · PLANET 2000 · SMS · HTS · EM20-S6000 · EM25-S6000 EMS-3060A · NRR3060-QC · HES810 · HPS500 · Xpeed1600 CAT. No. 91405 91406 91407 RA11805 RA11804 RA11806 RA11807 RA11808 RA11803 RA11815 RA11814 RA11809 91417 RA11810 RA11822 RA11811 RA11831 91422 91423 RA11812 RA11824 RA11821 RA11826 91427 RA11828 RA11829 RA11813 91494 RA11830 RA11818 91496 91432 91433 91434 RA11823 91436 91437 91438 91439 RA11819 91495 Model CHA-0.5 CHA-0.6 CHA-0.7 CHA-0.8 CHA-0.9 CHA-1.0 CHA-1.1 CHA-1.2 CHA-1.3 CHA-1.4 CHA-1.5 CHA-1.6 CHA-1.7 CHA-1.8 CHA-1.9 CHA-2.0 CHA-2.1 CHA-2.2 CHA-2.3 CHA-2.35 CHA-2.4 CHA-2.5 CHA-2.6 CHA-2.7 CHA-2.8 CHA-2.9 CHA-3.0 CHA-3.0AA* CHA-3.1 CHA-3.175 CHA-3.175AA* CHA-3.2 CHA-3.3 CHA-3.4 CHA-3.5 CHA-3.6 CHA-3.7 CHA-3.8 CHA-3.9 CHA-4.0 CHA-4.0AA* Inside Diameter d ø0.5 ø0.6 ø0.7 ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø3.0 ø3.1 ø1/8" ø1/8" ø3.2 ø3.3 ø3.4 ø3.5 ø3.6 ø3.7 ø3.8 ø3.9 ø4.0 ø4.0 Price Model CHC-1.6 CHC-2.35 CHC-3.0 CHC-3.175 Inside Diameter d ø1.6 ø2.35 ø3.0 ø1/8" Price 1.46" CAT. No. Model Inside Diameter d 91730 91793 CHF-3.0 CHF-3.175 ø3.0 ø1/8" Price CHG Group d 1.54" Fit to HG-200 · NR-301 · EHG-400 Fit to NR-301 CAT. No. RA11777 RA11778 RA11766 RA11780 RA11771 RA11781 RA11772 RA11452 RA11697 RA11698 RA11709 RA11773 RA11714 1.38" Model CHG-1.0 CHG-1.5 CHG-1.6 CHG-2.0 CHG-2.35 CHG-2.5 CHG-3.0 CHG-3.175 CHG-4.0 CHG-4.76 CHG-5.0 CHG-6.0 CHG-6.35 Inside Diameter d ø1.0 ø1.5 ø1.6 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" ø4.0 ø4.76 ø5.0 ø6.0 ø1/4" Price CHH Group PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX 6-p2 d 1.33" Fit to NRR-2651 · NRR-3060 · NR40-5100 ATC CAT. No. 92820 92830 92893 92840 Model CHB-2.0 CHB-3.0 CHB-3.175 CHB-4.0 Inside Diameter d ø2.0 ø3.0 ø1/8" ø4.0 Price Fit to IH-300 · IR-310 · EHL-401 · EHR-401 · EHR-500 · VH-E CAT. No. RE11729 90615 RE11659 RE11734 RE11625 90625 RE11739 RE11630 Model CHH-1.0 CHH-1.5 CHH-1.6 CHH-2.0 CHH-2.35 CHH-2.5 CHH-3.0 CHH-3.175 Fit to : K-265 : CHN-B Inside Diameter d ø1.0 ø1.5 ø1.6 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" Model CHK-5.9 CHK-6.0 CHK-6.0AA* CHK-6.35 CHK-6.35AA* Inside Diameter d ø5.9 ø6.0 ø6.0 ø1/4" ø1/4" Price 1 EmaxEVO ESPERT Fit to ABS-70P · ABS-400 · AMX-50 · AMX-65 (1/1 Ratio) · AMX-80 (1/1 Ratio) · EM30-S6000 · EMA-3020K EMS-3041 · EMS-3045 · EMS-3052 · EMS-3056 · EMS-3046-J4 · EMS-3057-J4 · EMS-6040 EMS-6040K · EMS-3060K · EMSF-3060K · EMR-3008K · MS-23 · MSS-25 · MSSH-25 · MST-23 MSST-23 · NR-2351 · NR-2532 · NR-H2532 · NR-2551 · NR-H2551 · NR-303 · NR-303P · NR-311 NR-3060S · NR-403E · NR-453E · NRAF-5080 · NRL-300 · NRL-300E · NRR3060-QC · NR4040-AQC NRR4040-QC · PMA-3013K · PMR-3005K · PMS-3020K · PS23-80/130 · PS23S-80 · PSA25-90/140 PSA25S-90 · PSA30-100/160 · PSA30S-100 · PSA35-120/180 · PSA35S-120 · RAS-101 · RAS-151E RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · FG-01S · PLANET 400 · HES510 · HPS250 · Xpeed1200 *High precision type Fit to NR-3080 CHB Group d CAT. No. 90416 90492 90430 90493 0.79" CAT. No. PL42697 PL42686 91600 PL42675 91601 Fit to NR-302 · ENR-302 Fit to IC-300 · KC-300 · EIC-300 · EKC-300 · IC-E · KC-E d 5 6 d 0.68" CHF Group Xpeed AIR LINE KIT d Fit to : K-263 : CHN-A CHK Group Price CAT. No. PL42665 91506 PL42667 PL42668 PL42692 PL42691 PL42699 PL42682 PL42693 PL42700 PL42695 PL42696 PL42709 PL42698 91519 PL42672 PL42681 PL42662 91523 PL42690 PL42710 PL42663 PL42712 PL42617 PL42694 PL42689 PL42669 91597 PL42670 PL42685 91598 91532 PL42705 PL42701 PL42707 PL42706 91537 PL42702 91539 PL42678 91599 PL42711 91542 PL42671 PL42673 PL42687 91546 PL42674 PL42680 91548 91549 PL42676 PL42677 PL42708 91553 PL42703 PL42704 PL42679 91557 91558 Inside Diameter d Model ø0.5 CHK-0.5 ø0.6 CHK-0.6 ø0.7 CHK-0.7 ø0.8 CHK-0.8 ø0.9 CHK-0.9 ø1.0 CHK-1.0 ø1.1 CHK-1.1 ø1.2 CHK-1.2 ø1.3 CHK-1.3 ø1.4 CHK-1.4 ø1.5 CHK-1.5 ø1.6 CHK-1.6 ø1.7 CHK-1.7 ø1.8 CHK-1.8 ø1.9 CHK-1.9 ø2.0 CHK-2.0 ø2.1 CHK-2.1 ø2.2 CHK-2.2 ø2.3 CHK-2.3 CHK-2.35 ø2.35 CHK-2.4 ø2.4 CHK-2.5 ø2.5 CHK-2.6 ø2.6 CHK-2.7 ø2.7 CHK-2.8 ø2.8 CHK-2.9 ø2.9 CHK-3.0 ø3.0 CHK-3.0AA* ø3.0 CHK-3.1 ø3.1 CHK-3.175 ø1/8" CHK-3.175AA* ø1/8" CHK-3.2 ø3.2 CHK-3.3 ø3.3 CHK-3.4 ø3.4 CHK-3.5 ø3.5 CHK-3.6 ø3.6 CHK-3.7 ø3.7 CHK-3.8 ø3.8 CHK-3.9 ø3.9 CHK-4.0 ø4.0 CHK-4.0AA* ø4.0 CHK-4.1 ø4.1 CHK-4.2 ø4.2 CHK-4.3 ø4.3 CHK-4.4 ø4.4 ø4.5 CHK-4.5 ø4.6 CHK-4.6 ø4.7 CHK-4.7 ø4.76 CHK-4.76 ø4.8 CHK-4.8 ø4.9 CHK-4.9 ø5.0 CHK-5.0 CHK-5.1 ø5.1 CHK-5.2 ø5.2 CHK-5.3 ø5.3 CHK-5.4 ø5.4 CHK-5.5 ø5.5 CHK-5.6 ø5.6 CHK-5.7 ø5.7 CHK-5.8 ø5.8 Price Old code number CHL Group d ROTUS IMPULSE 0.98" Fit to : CHN-L ø0.59" ESPERT d CHC Group ø0.41" 1 EmaxEVO ø0.29" CHA Group Fit to AMX-65 (1/3 · 1/9 Ratio) · PSA40-140/200 · PSA40S-140 · PSA45-160/220 PSA45S-160 · PSA50-180/240 · PSA50S-180 CAT. No. 91610 91615 91620 91692 91625 91630 91693 91635 91640 91645 91650 91655 91660 91696 91665 91670 91675 91680 Model CHL-1.0 CHL-1.5 CHL-2.0 CHL-2.35 CHL-2.5 CHL-3.0 CHL-3.175 CHL-3.5 CHL-4.0 CHL-4.5 CHL-5.0 CHL-5.5 CHL-6.0 CHL-6.35 CHL-6.5 CHL-7.0 CHL-7.5 CHL-8.0 Inside Diameter d ø1.0 ø1.5 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" ø3.5 ø4.0 ø4.5 ø5.0 ø5.5 ø6.0 ø1/4" ø6.5 ø7.0 ø7.5 ø8.0 Price PRESTO II SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use * Order by catalog number. 6-p3 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 6-p4 < PARTS > COLLET CHS Group 1.35" d d CH5 Group 0.93" d 1.18" 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 Fit to MH-300 · BMH-300 Fit to ERA-270 · 45˚, 90˚ Angle Type ECOMO · IMPULSE SERIES Fit to NR-600 · NR-601 · AMH-300 · AMH-301 Fit to RA-200 · RA-271E · RA-2521 · RA-H2521 CAT. No. RE11605 RE11600 RE11609 RE11602 RE10459 RE11604 Model CHM-1.0 CHM-1.6 CHM-2.0 CHM-2.35 CHM-3.0 CHM-3.175 Inside Diameter d ø1.0 ø1.6 ø2.0 ø2.35 ø3.0 ø1/8" Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 CHP Group ø0.897" E3000 - One Piece E3000 - Modular 1.38" d ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" Fit to ENR-420 ATC Fit to NRR-2650 · NR-260E ATC CAT. No. AS72115 AS72116 AS72117 Model CHP-2.0 CHP-3.0 CHP-3.175 Inside Diameter d ø2.0 ø3.0 ø1/8" Price CAT. No. NK10216 90509 NK10218 90511 90512 90513 90514 NK10219 NK10220 90517 90518 90519 NK10221 90521 90522 90523 NK10215 NK10224 NK10222 90526 90527 90528 NK10209 NK10223 NK10210 Model CHS-0.8 CHS-0.9 CHS-1.0 CHS-1.1 CHS-1.2 CHS-1.3 CHS-1.4 CHS-1.5 CHS-1.6 CHS-1.7 CHS-1.8 CHS-1.9 CHS-2.0 CHS-2.1 CHS-2.2 CHS-2.3 CHS-2.35 CHS-2.4 CHS-2.5 CHS-2.6 CHS-2.7 CHS-2.8 CHS-2.9 CHS-3.0 CHS-3.175 Inside Diameter d ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø1/8" Price ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CHSS Group CHR Group d d 0.93" 1.18" 4 Fit to EMA-3020S · PMA-3013S HES510 HES810 HTS HPS Xpeed 5 Fit to NR-5040E ATC · NR-5041E ATC · NR50-5100 ATC CAT. No. 91920 91930 91993 91940 91960 91996 Model CHR-2.0 CHR-3.0 CHR-3.175 CHR-4.0 CHR-6.0 CHR-6.35 Inside Diameter d ø2.0 ø3.0 ø1/8" ø4.0 ø6.0 ø1/4" Price AIR LINE KIT 6 PARTS 7 CHR RS Group d 1.18" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Fit to NR-5040E ATC · NR-5041E ATC · NR50-5100 ATC RS CAT. No. 93201 93202 93203 93204 93205 Model CHR-3.0 RS CHR-3.175 RS CHR-4.0 RS CHR-6.0 RS CHR-6.35 RS Inside Diameter d ø3.0 ø1/8" ø4.0 ø6.0 ø1/4" Price CAT. No. 93010 93015 93020 93092 93025 93030 93093 Model CHSS-1.0 CHSS-1.5 CHSS-2.0 CHSS-2.35 CHSS-2.5 CHSS-3.0 CHSS-3.175 Inside Diameter d ø1.0 ø1.5 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" Fit to : K-218 : CHN-02 Fit to PLANET 550 · BANTAM 150 · AMS-150R · AMS-150L · AMS-600 AMS-20R · AMS-20L · AMS-50R · AMS-50L · MSTN-23 · NR-310 · FG-02S ø1.0" ø0.98" MS CH6 Group Price CAT. No. 91203 91204 91205 PL11464 PL11465 PL11467 PL11468 PL11488 PL11469 PL11470 91213 91214 PL11494 PL11495 91217 PL11498 91219 PL11489 91221 PL11492 91223 91292 91224 PL10672 91226 PL10683 PL10670 91229 PL11490 91231 PL11466 91232 91233 PL10671 PL10673 PL10674 PL10682 91238 91239 PL10677 91241 91242 PL10681 PL10679 PL10678 91246 91247 91294 91248 91249 PL10676 91251 91252 91253 91254 91255 91256 91257 91258 91259 PL11502 PL10675 Model CH5-0.3 CH5-0.4 CH5-0.5 CH5-0.6 CH5-0.7 CH5-0.8 CH5-0.9 CH5-1.0 CH5-1.1 CH5-1.2 CH5-1.3 CH5-1.4 CH5-1.5 CH5-1.6 CH5-1.7 CH5-1.8 CH5-1.9 CH5-2.0 CH5-2.1 CH5-2.2 CH5-2.3 CH5-2.35 CH5-2.4 CH5-2.5 CH5-2.6 CH5-2.7 CH5-2.8 CH5-2.9 CH5-3.0 CH5-3.1 CH5-3.175 CH5-3.2 CH5-3.3 CH5-3.4 CH5-3.5 CH5-3.6 CH5-3.7 CH5-3.8 CH5-3.9 CH5-4.0 CH5-4.1 CH5-4.2 CH5-4.3 CH5-4.4 CH5-4.5 CH5-4.6 CH5-4.7 CH5-4.76 CH5-4.8 CH5-4.9 CH5-5.0 CH5-5.1 CH5-5.2 CH5-5.3 CH5-5.4 CH5-5.5 CH5-5.6 CH5-5.7 CH5-5.8 CH5-5.9 CH5-6.0 CH5-6.35 Inside Diameter d ø0.3 ø0.4 ø0.5 ø0.6 ø0.7 ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø3.1 ø1/8" ø3.2 ø3.3 ø3.4 ø3.5 ø3.6 ø3.7 ø3.8 ø3.9 ø4.0 ø4.1 ø4.2 ø4.3 ø4.4 ø4.5 ø4.6 ø4.7 ø4.76 ø4.8 ø4.9 ø5.0 ø5.1 ø5.2 ø5.3 ø5.4 ø5.5 ø5.6 ø5.7 ø5.8 ø5.9 ø6.0 ø1/4" Fit to ABS-1600 1.39" d 1 CAT. No. Model Inside Diameter d 90830 90893 CH6-3.0 CH6-3.175 ø3.0 ø1/8" Price EmaxEVO ESPERT ROTUS Price IMPULSE CH8 Group PRESTO II Fit to RA-100 · RA-151E · RA-2511 RA-H2511 1.35" d CAT. No. PL11539 91009 PL11540 PL11531 PL11536 PL11533 PL11555 PL11556 PL11517 PL11568 PL11569 91019 PL11574 91021 PL11532 91023 PL11521 PL11522 PL11523 PL11525 91027 PL11578 91029 PL11588 PL10637 Model CH8-0.8 CH8-0.9 CH8-1.0 CH8-1.1 CH8-1.2 CH8-1.3 CH8-1.4 CH8-1.5 CH8-1.6 CH8-1.7 CH8-1.8 CH8-1.9 CH8-2.0 CH8-2.1 CH8-2.2 CH8-2.3 CH8-2.35 CH8-2.4 CH8-2.5 CH8-2.6 CH8-2.7 CH8-2.8 CH8-2.9 CH8-3.0 CH8-3.175 Inside Diameter d ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø1/8" Price SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 CH16 Group HES510 d Fit to BMS-4020 · BMS-4020RA BMS-4040 · BMS-4040RA NR-4040 · NR4040-AQC NRR4040-QC 1.08" ø0.65" CHM Group CAT. No. 93130 93193 93140 93160 93196 93180 Model CH16-3.0 CH16-3.175 CH16-4.0 CH16-6.0 CH16-6.35 CH16-8.0 Inside Diameter d ø3.0 ø1/8" ø4.0 ø6.0 ø1/4" ø8.0 Price HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS CH20-16 ø0.06" 7 0.46" TECHNICAL DATA Fit to PLANET 2000 CAT. No. Model Inside Diameter d PL10641 CH20-16 ø1/16" 8 Price APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p4 * Order by catalog number. 6-p5 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 6-p4 < PARTS > COLLET CHS Group 1.35" d d CH5 Group 0.93" d 1.18" 1 EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 Fit to MH-300 · BMH-300 Fit to ERA-270 · 45˚, 90˚ Angle Type ECOMO · IMPULSE SERIES Fit to NR-600 · NR-601 · AMH-300 · AMH-301 Fit to RA-200 · RA-271E · RA-2521 · RA-H2521 CAT. No. RE11605 RE11600 RE11609 RE11602 RE10459 RE11604 Model CHM-1.0 CHM-1.6 CHM-2.0 CHM-2.35 CHM-3.0 CHM-3.175 Inside Diameter d ø1.0 ø1.6 ø2.0 ø2.35 ø3.0 ø1/8" Price iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 CHP Group ø0.897" E3000 - One Piece E3000 - Modular 1.38" d ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" Fit to ENR-420 ATC Fit to NRR-2650 · NR-260E ATC CAT. No. AS72115 AS72116 AS72117 Model CHP-2.0 CHP-3.0 CHP-3.175 Inside Diameter d ø2.0 ø3.0 ø1/8" Price CAT. No. NK10216 90509 NK10218 90511 90512 90513 90514 NK10219 NK10220 90517 90518 90519 NK10221 90521 90522 90523 NK10215 NK10224 NK10222 90526 90527 90528 NK10209 NK10223 NK10210 Model CHS-0.8 CHS-0.9 CHS-1.0 CHS-1.1 CHS-1.2 CHS-1.3 CHS-1.4 CHS-1.5 CHS-1.6 CHS-1.7 CHS-1.8 CHS-1.9 CHS-2.0 CHS-2.1 CHS-2.2 CHS-2.3 CHS-2.35 CHS-2.4 CHS-2.5 CHS-2.6 CHS-2.7 CHS-2.8 CHS-2.9 CHS-3.0 CHS-3.175 Inside Diameter d ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø1/8" Price ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CHSS Group CHR Group d d 0.93" 1.18" 4 Fit to EMA-3020S · PMA-3013S HES510 HES810 HTS HPS Xpeed 5 Fit to NR-5040E ATC · NR-5041E ATC · NR50-5100 ATC CAT. No. 91920 91930 91993 91940 91960 91996 Model CHR-2.0 CHR-3.0 CHR-3.175 CHR-4.0 CHR-6.0 CHR-6.35 Inside Diameter d ø2.0 ø3.0 ø1/8" ø4.0 ø6.0 ø1/4" Price AIR LINE KIT 6 PARTS 7 CHR RS Group d 1.18" TECHNICAL DATA 8 APPLICATION EXAMPLES INDEX Fit to NR-5040E ATC · NR-5041E ATC · NR50-5100 ATC RS CAT. No. 93201 93202 93203 93204 93205 Model CHR-3.0 RS CHR-3.175 RS CHR-4.0 RS CHR-6.0 RS CHR-6.35 RS Inside Diameter d ø3.0 ø1/8" ø4.0 ø6.0 ø1/4" Price CAT. No. 93010 93015 93020 93092 93025 93030 93093 Model CHSS-1.0 CHSS-1.5 CHSS-2.0 CHSS-2.35 CHSS-2.5 CHSS-3.0 CHSS-3.175 Inside Diameter d ø1.0 ø1.5 ø2.0 ø2.35 ø2.5 ø3.0 ø1/8" Fit to : K-218 : CHN-02 Fit to PLANET 550 · BANTAM 150 · AMS-150R · AMS-150L · AMS-600 AMS-20R · AMS-20L · AMS-50R · AMS-50L · MSTN-23 · NR-310 · FG-02S ø1.0" ø0.98" MS CH6 Group Price CAT. No. 91203 91204 91205 PL11464 PL11465 PL11467 PL11468 PL11488 PL11469 PL11470 91213 91214 PL11494 PL11495 91217 PL11498 91219 PL11489 91221 PL11492 91223 91292 91224 PL10672 91226 PL10683 PL10670 91229 PL11490 91231 PL11466 91232 91233 PL10671 PL10673 PL10674 PL10682 91238 91239 PL10677 91241 91242 PL10681 PL10679 PL10678 91246 91247 91294 91248 91249 PL10676 91251 91252 91253 91254 91255 91256 91257 91258 91259 PL11502 PL10675 Model CH5-0.3 CH5-0.4 CH5-0.5 CH5-0.6 CH5-0.7 CH5-0.8 CH5-0.9 CH5-1.0 CH5-1.1 CH5-1.2 CH5-1.3 CH5-1.4 CH5-1.5 CH5-1.6 CH5-1.7 CH5-1.8 CH5-1.9 CH5-2.0 CH5-2.1 CH5-2.2 CH5-2.3 CH5-2.35 CH5-2.4 CH5-2.5 CH5-2.6 CH5-2.7 CH5-2.8 CH5-2.9 CH5-3.0 CH5-3.1 CH5-3.175 CH5-3.2 CH5-3.3 CH5-3.4 CH5-3.5 CH5-3.6 CH5-3.7 CH5-3.8 CH5-3.9 CH5-4.0 CH5-4.1 CH5-4.2 CH5-4.3 CH5-4.4 CH5-4.5 CH5-4.6 CH5-4.7 CH5-4.76 CH5-4.8 CH5-4.9 CH5-5.0 CH5-5.1 CH5-5.2 CH5-5.3 CH5-5.4 CH5-5.5 CH5-5.6 CH5-5.7 CH5-5.8 CH5-5.9 CH5-6.0 CH5-6.35 Inside Diameter d ø0.3 ø0.4 ø0.5 ø0.6 ø0.7 ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø3.1 ø1/8" ø3.2 ø3.3 ø3.4 ø3.5 ø3.6 ø3.7 ø3.8 ø3.9 ø4.0 ø4.1 ø4.2 ø4.3 ø4.4 ø4.5 ø4.6 ø4.7 ø4.76 ø4.8 ø4.9 ø5.0 ø5.1 ø5.2 ø5.3 ø5.4 ø5.5 ø5.6 ø5.7 ø5.8 ø5.9 ø6.0 ø1/4" Fit to ABS-1600 1.39" d 1 CAT. No. Model Inside Diameter d 90830 90893 CH6-3.0 CH6-3.175 ø3.0 ø1/8" Price EmaxEVO ESPERT ROTUS Price IMPULSE CH8 Group PRESTO II Fit to RA-100 · RA-151E · RA-2511 RA-H2511 1.35" d CAT. No. PL11539 91009 PL11540 PL11531 PL11536 PL11533 PL11555 PL11556 PL11517 PL11568 PL11569 91019 PL11574 91021 PL11532 91023 PL11521 PL11522 PL11523 PL11525 91027 PL11578 91029 PL11588 PL10637 Model CH8-0.8 CH8-0.9 CH8-1.0 CH8-1.1 CH8-1.2 CH8-1.3 CH8-1.4 CH8-1.5 CH8-1.6 CH8-1.7 CH8-1.8 CH8-1.9 CH8-2.0 CH8-2.1 CH8-2.2 CH8-2.3 CH8-2.35 CH8-2.4 CH8-2.5 CH8-2.6 CH8-2.7 CH8-2.8 CH8-2.9 CH8-3.0 CH8-3.175 Inside Diameter d ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø1/8" Price SHEENUS neo SONIC CUTTER 2 iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 CH16 Group HES510 d Fit to BMS-4020 · BMS-4020RA BMS-4040 · BMS-4040RA NR-4040 · NR4040-AQC NRR4040-QC 1.08" ø0.65" CHM Group CAT. No. 93130 93193 93140 93160 93196 93180 Model CH16-3.0 CH16-3.175 CH16-4.0 CH16-6.0 CH16-6.35 CH16-8.0 Inside Diameter d ø3.0 ø1/8" ø4.0 ø6.0 ø1/4" ø8.0 Price HES810 HTS HPS Xpeed 5 AIR LINE KIT 6 PARTS CH20-16 ø0.06" 7 0.46" TECHNICAL DATA Fit to PLANET 2000 CAT. No. Model Inside Diameter d PL10641 CH20-16 ø1/16" 8 Price APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p4 * Order by catalog number. 6-p5 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 6-p6 < PARTS > COLLET & COLLET NUT CAT. No. Model — ER16-UP REGO-FIX ER16-UP AR16-AA ALPS TOOL AR16-AA PRESTO II 2 — Price Available in the market CAT. No. Model Fit to 2102 CHN-A CHA Price K-252 E3000 - One Piece Fit to HTS · AMS-1501/ 1510 · AMS-1210 Fit to MFC-300S CAT. No. CAT. No. Model Inside Diameter d RE10360 K-252 ø1/16" 2159 Model Fit to CHN-AA CHA Price K-253 ø0.39" Model Fit to AS32124 CHN-02 CH5 ø0.74" ø0.06" Fit to : CHK 0.26" MS Fit to MFC-300M CAT. No. Model Inside Diameter d RE10356 K-253 ø1/16" Price CAT. No. Model Fit to AS12123 CHN-B CHK Price CHA Fit to 2160 CHN-3A CHA-AA Fit to : CHN-6 5 Fit to IG-400 · Straight Type ECOMO CAT. No. 92030 92092 92093 Model NKM6-2.35 NKM6-3.0 NKM6-3.175 Inside Diameter d ø2.35 ø3.0 ø1/8" 2 Collet Nut K-265 iSpeed3 Fit to : CHK Fit to AMX-80 (1/3 · 1/9 Ratio) · PSA60-200/260 · PSA60S-200 CAT. No. Model Fit to PS12119 CHN-E ER16-UP AR16-AA Price Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" Fit to ABS-400 · ABS-70P · AMX-50 · AMX-65 (1/1 Ratio) · AMX-80 (1/1 Ratio) EM30-S6000 · EMA-3020K · EMS-3041 · EMS-3046-J4 · EMS-3052 · EMS-3057-J4 EMS-3060K · EMSF-3060K · EMR-3008K · FG-01S · HES510 · HPS250 NR-403E · NR-453E · NRL-300E · NR-2532 · NR-H2532 · NR-2511 · NR-H2511 NR-2551 · NR-H2551 · NR-2351 · NRL-300 · NR-303 · NR-303P · NR-311 · NR-3060S NRR3060-QC · NR4040-AQC · NRR4040-QC · MS-23 · MSS-23 · MST-23 MSST-23 · MSS-25 · MSSH-25 PMA-3013K · PMR-3005K · PMS-3020K · PS23-80/130 · PS23S-80 · PSA25-90/140 PSA25S-90 · PSA30-100/160 · PSA30S-100 · PSA35-120/180 · PSA35S-120 PLANET 400 · RAS-101 · RAS-151E · RAS-2510 · RAS-H2510 · RAX-271E · RAX-71E CAT. No. Model Fit to RA11900 K-265 CHK Price E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø1.0" ø0.98" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Collet Nut K-265A Fit to BMS-4020 · BMS-4020RA · BMS-4040 · BMS-4040RA NR-4040 · NR4040-AQC · NRR4040-QC CAT. No. Model Fit to 2161 CHN-16 CH16 Fit to : CHK 4 HES510 HES810 Fit to NRAF-5080 · Xpeed1200 HTS CAT. No. Model Fit to 2158 K-265A CHK Price HPS Xpeed 5 Price AIR LINE KIT 6 PARTS Collet Nut CHN-L 7 Collet Nut K-218 TECHNICAL DATA 0.91" Fit to : CHL 8 0.35" Fit to : CH5 ø0.63" 0.43" Fit to : ER16-UP AR16-AA ø0.98" d IMPULSE PRESTO II Price Fit to : CH16 ø0.91" HPS ROTUS ø1.18" 1.00" ø1.09" NKM6 Group (NK Micron Collet) ESPERT ø0.897" Model 0.98" APPLICATION EXAMPLES INDEX K-263 Collet Nut CHN-16 Collet Nut CHN-E Xpeed Fit to : CHA-AA CAT. No. HES810 7 RA11820 Price 0.49" HES510 TECHNICAL DATA Fit to Fit to Xpeed1600 Fit to EMS-6040 · EMS-6040K PARTS Price 0.41" 0.49" ø1.18" 6 Model 0.49" CAT. No. Collet Nut CHN-B (For EMS-6040/6040K) ø1.0" ø0.98" AIR LINE KIT Fit to : CH5 Collet Nut CHN-3A ø0.897" HTS CAT. No. EmaxEVO SHEENUS neo SONIC CUTTER Price 3 4 NKM6 Group Fit to NRA-5080 · NR-320 · ABS-800 · PS20-70/120 · PS20S-70 · PSA23-80/130 PSA23S-80 · SMS400 · BANTAM 250 · PLANET 850 · PLANET 1500 AMS-250 · AMS-1500 · MS-19 · 20 · 22 Fit to NR-310 · AMS-20R · AMS-20L · AMS-50R · AMS-50L · MSTN-23 · FG-02S E4000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CHN-6 Fit to : CHA ø0.897" MA 2104 Price 0.47" ø0.46" 0.50" E2530 / E2550 E3000 - 80,000rpm Fit to 0.45" ø0.06" ø1.0"/ø0.98" ø1.0"/ø0.98" ø0.897" Model 1 Collet Nut CHN-02 E2530 / E2550 ø1.18" CAT. No. Collet Nut CHN-AA iSpeed3 E3000 - Modular Fit to IG-400 · Straight Type ECOMO Fit to : CHA ø0.63" SHEENUS neo SONIC CUTTER Fit to Fit to iSpeed3 · EM20-S6000 · EM25-S6000 · EMS-3060A · HES810 · HPS500 MSS-19 · MSS-20 · MSS-22 · NR-3080S · NRR3060-QC · PMS-3020A SMS401 Fit to : NKM6 Group ø0.60" IMPULSE Fit to AMX-80 (1/3 · 1/9 Ratio) · PSA60-200/260 · PSA60S-200 0.45" 0.35" Fit to : CHA ø0.67" ROTUS Fit to : CHN-E Collet Nut K-263 ø0.43" ESPERT 0.45" (1.08") (ø0.67") 1 EmaxEVO Collet Nut CHN-6 ø0.46" d Collet Nut CHN-A ø0.51" ER16-UP / AR16-AA Fit to AMX-65 (1/3 · 1/9 Ratio) · PSA40-140/200 · PSA40S-140 · PSA45-160/220 PSA45S-160 · PSA50-180/240 · PSA50S-180 CAT. No. Model Fit to PS02121 CHN-L CHL Price 8 APPLICATION EXAMPLES Fit to PLANET 550 · BANTAM 150 · AMS-150R · AMS-150L · AMS-600 CAT. No. Model Fit to PL12120 K-218 CH5 INDEX Price indicates Hand Grinder use indicates Machine Spindle use 6-p6 * Order by catalog number. 6-p7 6-p0-19_Parts_1408.qxd 14.8.1 8:49 PM ページ 6-p6 < PARTS > COLLET & COLLET NUT CAT. No. Model — ER16-UP REGO-FIX ER16-UP AR16-AA ALPS TOOL AR16-AA PRESTO II 2 — Price Available in the market CAT. No. Model Fit to 2102 CHN-A CHA Price K-252 E3000 - One Piece Fit to HTS · AMS-1501/ 1510 · AMS-1210 Fit to MFC-300S CAT. No. CAT. No. Model Inside Diameter d RE10360 K-252 ø1/16" 2159 Model Fit to CHN-AA CHA Price K-253 ø0.39" Model Fit to AS32124 CHN-02 CH5 ø0.74" ø0.06" Fit to : CHK 0.26" MS Fit to MFC-300M CAT. No. Model Inside Diameter d RE10356 K-253 ø1/16" Price CAT. No. Model Fit to AS12123 CHN-B CHK Price CHA Fit to 2160 CHN-3A CHA-AA Fit to : CHN-6 5 Fit to IG-400 · Straight Type ECOMO CAT. No. 92030 92092 92093 Model NKM6-2.35 NKM6-3.0 NKM6-3.175 Inside Diameter d ø2.35 ø3.0 ø1/8" 2 Collet Nut K-265 iSpeed3 Fit to : CHK Fit to AMX-80 (1/3 · 1/9 Ratio) · PSA60-200/260 · PSA60S-200 CAT. No. Model Fit to PS12119 CHN-E ER16-UP AR16-AA Price Price E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" Fit to ABS-400 · ABS-70P · AMX-50 · AMX-65 (1/1 Ratio) · AMX-80 (1/1 Ratio) EM30-S6000 · EMA-3020K · EMS-3041 · EMS-3046-J4 · EMS-3052 · EMS-3057-J4 EMS-3060K · EMSF-3060K · EMR-3008K · FG-01S · HES510 · HPS250 NR-403E · NR-453E · NRL-300E · NR-2532 · NR-H2532 · NR-2511 · NR-H2511 NR-2551 · NR-H2551 · NR-2351 · NRL-300 · NR-303 · NR-303P · NR-311 · NR-3060S NRR3060-QC · NR4040-AQC · NRR4040-QC · MS-23 · MSS-23 · MST-23 MSST-23 · MSS-25 · MSSH-25 PMA-3013K · PMR-3005K · PMS-3020K · PS23-80/130 · PS23S-80 · PSA25-90/140 PSA25S-90 · PSA30-100/160 · PSA30S-100 · PSA35-120/180 · PSA35S-120 PLANET 400 · RAS-101 · RAS-151E · RAS-2510 · RAS-H2510 · RAX-271E · RAX-71E CAT. No. Model Fit to RA11900 K-265 CHK Price E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø1.0" ø0.98" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Collet Nut K-265A Fit to BMS-4020 · BMS-4020RA · BMS-4040 · BMS-4040RA NR-4040 · NR4040-AQC · NRR4040-QC CAT. No. Model Fit to 2161 CHN-16 CH16 Fit to : CHK 4 HES510 HES810 Fit to NRAF-5080 · Xpeed1200 HTS CAT. No. Model Fit to 2158 K-265A CHK Price HPS Xpeed 5 Price AIR LINE KIT 6 PARTS Collet Nut CHN-L 7 Collet Nut K-218 TECHNICAL DATA 0.91" Fit to : CHL 8 0.35" Fit to : CH5 ø0.63" 0.43" Fit to : ER16-UP AR16-AA ø0.98" d IMPULSE PRESTO II Price Fit to : CH16 ø0.91" HPS ROTUS ø1.18" 1.00" ø1.09" NKM6 Group (NK Micron Collet) ESPERT ø0.897" Model 0.98" APPLICATION EXAMPLES INDEX K-263 Collet Nut CHN-16 Collet Nut CHN-E Xpeed Fit to : CHA-AA CAT. No. HES810 7 RA11820 Price 0.49" HES510 TECHNICAL DATA Fit to Fit to Xpeed1600 Fit to EMS-6040 · EMS-6040K PARTS Price 0.41" 0.49" ø1.18" 6 Model 0.49" CAT. No. Collet Nut CHN-B (For EMS-6040/6040K) ø1.0" ø0.98" AIR LINE KIT Fit to : CH5 Collet Nut CHN-3A ø0.897" HTS CAT. No. EmaxEVO SHEENUS neo SONIC CUTTER Price 3 4 NKM6 Group Fit to NRA-5080 · NR-320 · ABS-800 · PS20-70/120 · PS20S-70 · PSA23-80/130 PSA23S-80 · SMS400 · BANTAM 250 · PLANET 850 · PLANET 1500 AMS-250 · AMS-1500 · MS-19 · 20 · 22 Fit to NR-310 · AMS-20R · AMS-20L · AMS-50R · AMS-50L · MSTN-23 · FG-02S E4000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" CHN-6 Fit to : CHA ø0.897" MA 2104 Price 0.47" ø0.46" 0.50" E2530 / E2550 E3000 - 80,000rpm Fit to 0.45" ø0.06" ø1.0"/ø0.98" ø1.0"/ø0.98" ø0.897" Model 1 Collet Nut CHN-02 E2530 / E2550 ø1.18" CAT. No. Collet Nut CHN-AA iSpeed3 E3000 - Modular Fit to IG-400 · Straight Type ECOMO Fit to : CHA ø0.63" SHEENUS neo SONIC CUTTER Fit to Fit to iSpeed3 · EM20-S6000 · EM25-S6000 · EMS-3060A · HES810 · HPS500 MSS-19 · MSS-20 · MSS-22 · NR-3080S · NRR3060-QC · PMS-3020A SMS401 Fit to : NKM6 Group ø0.60" IMPULSE Fit to AMX-80 (1/3 · 1/9 Ratio) · PSA60-200/260 · PSA60S-200 0.45" 0.35" Fit to : CHA ø0.67" ROTUS Fit to : CHN-E Collet Nut K-263 ø0.43" ESPERT 0.45" (1.08") (ø0.67") 1 EmaxEVO Collet Nut CHN-6 ø0.46" d Collet Nut CHN-A ø0.51" ER16-UP / AR16-AA Fit to AMX-65 (1/3 · 1/9 Ratio) · PSA40-140/200 · PSA40S-140 · PSA45-160/220 PSA45S-160 · PSA50-180/240 · PSA50S-180 CAT. No. Model Fit to PS02121 CHN-L CHL Price 8 APPLICATION EXAMPLES Fit to PLANET 550 · BANTAM 150 · AMS-150R · AMS-150L · AMS-600 CAT. No. Model Fit to PL12120 K-218 CH5 INDEX Price indicates Hand Grinder use indicates Machine Spindle use 6-p6 * Order by catalog number. 6-p7 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p8 < PARTS > MOTOR CORD < PARTS > FOOT PEDAL & HANDPIECE STAND ETC. Emax EVOlution Motor Cord Product Description Straight Cord : 4.5 ft 1 ESPERT 400 Motor Cord CAT. No. Model Price Fit to Product Description 8088 ENKCD-410S ENK-410S (Standard Motor) ESPERT 400 Motor Cord 8089 ENKCD-250T ENK-250T (Torque Motor) ESPERT 400 Motor Cord 10 ft CAT. No. Model Price Fit to 9046 ENKCD-401 ENK-401 • Standard Motor Cord : 4.5 ft 9047 ENKCD-401-3M ENK-401 • Long Motor Cord : 10 ft 1 EmaxEVO EmaxEVO ESPERT Coiled Cord : 4.5 ft ROTUS 8090 8091 ENKCD-410C ENKCD-250C ENK-410S (Standard Motor) ESPERT Foot Pedal ENK-250T (Torque Motor) Product IMPULSE ELECTER Description Coiled Cord : 4.5 ft iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Straight Cord : 6 ft E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular Extension Straight Cord : 10 ft ø1.18" ø1.0"/ø0.98" ø0.897" ON-OFF and speed change can be accomplished. Motor Cord Product 2 CAT. No. Model Fit to Switch color 3 Model 8106 FC-64 EMX8004 EMX8013 EMX8023 EMX8005 EMX8014 EMX8024 NCL-351C NK-351 (Standard Motor) NCL-261C NK-261 (Torque Motor) Green NCL-151C NK-151 (Super Torque Motor) Gray NCL-351S NK-351 (Standard Motor) Blue NCL-261S NK-261 (Torque Motor) Green NCL-151S NK-151 (Super Torque Motor) Gray EMX8051 NCL-EXT ELECTER E-max Motor (All Types) Blue Foot Pedal Description EL11330 FC-35 ELECTER (previous model) / CONCEPT NE30 E2530 / E2550 ZO18001 FC-25 VIVA-MATE 3 NE77-A E2530 / E2550 MA Motor Cord Adaptor ø0.897" ø1.0" ø0.98" Model Fit to ø1.0"/ø0.98" Foot Pedal ON-OFF switch only SHE8103 FC-24 AFC-45 AFC-40 E3000 - Modular MIRACLE · ROTUS FINE BELT SANDER ROTUS Air Line Kit AL-0306 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm PRESTO II PR2-06 · PRESTO PR-06 E4000 3 • This adaptor is used for connecting former GX motor cable to the E-max unit. Product Description CAT. No. 8104 MA Model K-274 Price Fit to Emax EVOlution · ELECTER E-max SHEENUS · SHEENUS neo ESPERT 500 ESPERT 500 Motor Cord Product Description ESPERT 500 Compact Motor Cord : 4.5 ft 4 HES510 HES810 HTS HPS CAT. No. Model Fit to Price Handpiece Stand ESPERT 500 Compact Motor Cord : 9.84 ft 9095 ENKCD-50C 3M ESPERT 500 Torque Motor Cord : 4.5 ft ES9094 ENKCD-50T ESPERT 500 Torque Motor Cord : 9.84 ft 9096 ENKCD-50T 3M ENK-500C (Compact Motor Cord) Z095101 ESPERT 400 ZO14001 NCL-S VIVA-MATE 3 K-273 Control Unit Emax EVOlution NE249 8107 ENK-500T (Torque Motor Cord) 6 Motor Cord CAT. No. Model EO15012 NCL-25CD Fit to Price VIVA-MATE 3 (NCL-25S) HH-01 Control Unit ELECTER E-max NE129 EG11417 K-230 Control Unit ELECTER-GX NE22E 1042 CNA-BL HTS HPS Xpeed 5 AIR LINE KIT 6 ECOMO PARTS Head Cover 7 NK11043 ELECTER-GX Motor Cord Product Description 8 APPLICATION EXAMPLES MS HES810 PARTS TECHNICAL DATA ø1.18" 4 EMX8050 VIVA-MATE 3 Motor Cord Description ø1.0" ø0.98" HES510 Handpiece Holder Product ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1519 ES9093 ENKCD-50C Xpeed AIR LINE KIT SHEENUS NE124 · SHEENUS neo NE240 Handpiece Stand, Handpiece Holder & Head Cover MS 5 ø0.897" E3000 - One Piece Price ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 2 iSpeed3 Z100001 CAT. No. SHEENUS neo SONIC CUTTER Control Unit ELECTER E-max NE129 · ELECTER-GX NE22E ESPERT 400 NE51 · ESPERT 500 NE96 SONIC-CUTTER NE80 AF10045 EMX8052 NCL-ADP351 EMX8053 NCL-ADP261 EMX8054 NCL-ADP151 PRESTO II FC-40 ON-OFF and speed change can be accomplished. Motor Cord Adaptor Product Control Unit Emax EVOlution NE249 IMPULSE EG11404 Foot Control ELECTER Price Fit to Price E3000 - 80,000rpm E4000 CAT. No. Foot Pedal PRESTO II SHEENUS neo SONIC CUTTER ROTUS Description CAT. No. Model EL11344 NCL-35GXC Coiled Cord : 4.5 ft Fit to NK-150 (Torque Motor) NK-260 (Super Torque Motor) EG11441 NCL-35GXS NK-350 (Standard Motor) EG11442 NCL-26GXS NK-150 (Torque Motor) NK-260 (Super Torque Motor) Straight Cord : 4.5 ft 7 IMPULSE TECHNICAL DATA Price 8 NK-350 (Standard Motor) EL11346 NCL-26GXC INDEX CNA APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p8 * Order by catalog number. 6-p9 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p8 < PARTS > MOTOR CORD < PARTS > FOOT PEDAL & HANDPIECE STAND ETC. Emax EVOlution Motor Cord Product Description Straight Cord : 4.5 ft 1 ESPERT 400 Motor Cord CAT. No. Model Price Fit to Product Description 8088 ENKCD-410S ENK-410S (Standard Motor) ESPERT 400 Motor Cord 8089 ENKCD-250T ENK-250T (Torque Motor) ESPERT 400 Motor Cord 10 ft CAT. No. Model Price Fit to 9046 ENKCD-401 ENK-401 • Standard Motor Cord : 4.5 ft 9047 ENKCD-401-3M ENK-401 • Long Motor Cord : 10 ft 1 EmaxEVO EmaxEVO ESPERT Coiled Cord : 4.5 ft ROTUS 8090 8091 ENKCD-410C ENKCD-250C ENK-410S (Standard Motor) ESPERT Foot Pedal ENK-250T (Torque Motor) Product IMPULSE ELECTER Description Coiled Cord : 4.5 ft iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Straight Cord : 6 ft E2530 / E2550 ø0.897" E3000 - One Piece E3000 - Modular Extension Straight Cord : 10 ft ø1.18" ø1.0"/ø0.98" ø0.897" ON-OFF and speed change can be accomplished. Motor Cord Product 2 CAT. No. Model Fit to Switch color 3 Model 8106 FC-64 EMX8004 EMX8013 EMX8023 EMX8005 EMX8014 EMX8024 NCL-351C NK-351 (Standard Motor) NCL-261C NK-261 (Torque Motor) Green NCL-151C NK-151 (Super Torque Motor) Gray NCL-351S NK-351 (Standard Motor) Blue NCL-261S NK-261 (Torque Motor) Green NCL-151S NK-151 (Super Torque Motor) Gray EMX8051 NCL-EXT ELECTER E-max Motor (All Types) Blue Foot Pedal Description EL11330 FC-35 ELECTER (previous model) / CONCEPT NE30 E2530 / E2550 ZO18001 FC-25 VIVA-MATE 3 NE77-A E2530 / E2550 MA Motor Cord Adaptor ø0.897" ø1.0" ø0.98" Model Fit to ø1.0"/ø0.98" Foot Pedal ON-OFF switch only SHE8103 FC-24 AFC-45 AFC-40 E3000 - Modular MIRACLE · ROTUS FINE BELT SANDER ROTUS Air Line Kit AL-0306 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm PRESTO II PR2-06 · PRESTO PR-06 E4000 3 • This adaptor is used for connecting former GX motor cable to the E-max unit. Product Description CAT. No. 8104 MA Model K-274 Price Fit to Emax EVOlution · ELECTER E-max SHEENUS · SHEENUS neo ESPERT 500 ESPERT 500 Motor Cord Product Description ESPERT 500 Compact Motor Cord : 4.5 ft 4 HES510 HES810 HTS HPS CAT. No. Model Fit to Price Handpiece Stand ESPERT 500 Compact Motor Cord : 9.84 ft 9095 ENKCD-50C 3M ESPERT 500 Torque Motor Cord : 4.5 ft ES9094 ENKCD-50T ESPERT 500 Torque Motor Cord : 9.84 ft 9096 ENKCD-50T 3M ENK-500C (Compact Motor Cord) Z095101 ESPERT 400 ZO14001 NCL-S VIVA-MATE 3 K-273 Control Unit Emax EVOlution NE249 8107 ENK-500T (Torque Motor Cord) 6 Motor Cord CAT. No. Model EO15012 NCL-25CD Fit to Price VIVA-MATE 3 (NCL-25S) HH-01 Control Unit ELECTER E-max NE129 EG11417 K-230 Control Unit ELECTER-GX NE22E 1042 CNA-BL HTS HPS Xpeed 5 AIR LINE KIT 6 ECOMO PARTS Head Cover 7 NK11043 ELECTER-GX Motor Cord Product Description 8 APPLICATION EXAMPLES MS HES810 PARTS TECHNICAL DATA ø1.18" 4 EMX8050 VIVA-MATE 3 Motor Cord Description ø1.0" ø0.98" HES510 Handpiece Holder Product ø0.897" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 1519 ES9093 ENKCD-50C Xpeed AIR LINE KIT SHEENUS NE124 · SHEENUS neo NE240 Handpiece Stand, Handpiece Holder & Head Cover MS 5 ø0.897" E3000 - One Piece Price ø1.18" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 2 iSpeed3 Z100001 CAT. No. SHEENUS neo SONIC CUTTER Control Unit ELECTER E-max NE129 · ELECTER-GX NE22E ESPERT 400 NE51 · ESPERT 500 NE96 SONIC-CUTTER NE80 AF10045 EMX8052 NCL-ADP351 EMX8053 NCL-ADP261 EMX8054 NCL-ADP151 PRESTO II FC-40 ON-OFF and speed change can be accomplished. Motor Cord Adaptor Product Control Unit Emax EVOlution NE249 IMPULSE EG11404 Foot Control ELECTER Price Fit to Price E3000 - 80,000rpm E4000 CAT. No. Foot Pedal PRESTO II SHEENUS neo SONIC CUTTER ROTUS Description CAT. No. Model EL11344 NCL-35GXC Coiled Cord : 4.5 ft Fit to NK-150 (Torque Motor) NK-260 (Super Torque Motor) EG11441 NCL-35GXS NK-350 (Standard Motor) EG11442 NCL-26GXS NK-150 (Torque Motor) NK-260 (Super Torque Motor) Straight Cord : 4.5 ft 7 IMPULSE TECHNICAL DATA Price 8 NK-350 (Standard Motor) EL11346 NCL-26GXC INDEX CNA APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p8 * Order by catalog number. 6-p9 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p10 < PARTS > PRESTO II & FINE BELT SANDER ETC. < PARTS > OIL, GREASE & SILENCER Oil List Power Supply Cord Product Description 1 CAT. No. Model 1484 K-269 EmaxEVO Description CAT. No. Model Control Unit Emax EVOlution NE249 Lubricating Oil (4 oz.) AA10478 K-211 ELECTER/ESPERT Control Unit Lubricating Oil (32 oz.) Fit to Product Price Price Fit to 1 For Air Motor · Air Line Kit EmaxEVO Power Supply Cord ESPERT ROTUS ESPERT U165013 U166A013 IMPULSE AA10480 K-202 ROTUS For Air Motor · Air Line Kit IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 PRESTO II Lubricating Oil for ECOMO Series (4 oz.) PRESTO II / PRESTO Product iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Description CAT. No. Model PRESTO II / PRESTO Cartridge T815016I PR-03 Fit to iSpeed3 Grease PRESTO II · PRESTO E2530 / E2550 Product E3000 - One Piece FINE BELT SANDER PARTS Product Description CAT. No. Model Fit to KBS1067 TP-12 KBS-100 · EBS-100 1103 TP-12A KBS-101 · EBS-101 KBS1068 TPA-12 KBS-100 · EBS-100 1104 TPA-12A KBS-101 · EBS-101 3 Tension Pulley Assembly MA ø0.897" ø1.0" ø0.98" 1547 — Grease for Reducer (10mL) 1550 — Product Description CAT. No. EO23011 Model Fit to E023011 NK-351 NK-350 · NK-804T ET II NK-260 E037011 NK-151 · NK-261 NK-150 ET II NK-260N Carbon Brush (each 2 pcs.) ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece ARG-011E · ARG-021E · EMA-3020K RAX-271E · RAX-71E E3000 - Modular ø1.18" 1549 — ø1.0"/ø0.98" ø0.897" ARG-011E · ARG-021E · EMA-3020K RAX-271E · RAX-71E E3000 - 80,000rpm 3 Silencer Product Carbon Brush 4 HTS Grease for Reducer (2.5mL) Price Fit to E4000 MS HES810 Model Grease for Reducer (100mL) ø1.18" HES510 CAT. No. Tension Pulley E4000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Description Price ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm SHEENUS neo SONIC CUTTER ECOMO 2 ø0.897" ø1.18" K-268 Price E2530 / E2550 E3000 - Modular 1055 MA Description CAT. No. Model Price Fit to Silencer Large (with Metal Fitting) AA10040 K-209 ROTUS PLANET 550 · AMS-20 · 50 · 150 · 250 · 600 · AM-300 (R · L) · AM-2526 (RA · LA) AM-H2526 (RA · LA) · MSS-19 · 20 · 22 · MS-23 (R · L) · MSS-25 (R) · MSSH-25 (R) · MSST-23 Silencer Small (with Metal Fitting) AA10055 K-208 IMPULSE · MIRACLE AM-300 (RA · LA) · AM-600 · AM-310 · AM-2526 · AM-H2526 (R · L) · MSS-19 · 20 · 22 MS-23 (RA · LA) · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 · ABS-800 · AM-3020 Silencer (with Metal Fitting) AS1546 K-246 AMX-8003 · AMX-8001 Price ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 EO37011 HES810 HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p10 * Order by catalog number. 6-p11 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p10 < PARTS > PRESTO II & FINE BELT SANDER ETC. < PARTS > OIL, GREASE & SILENCER Oil List Power Supply Cord Product Description 1 CAT. No. Model 1484 K-269 EmaxEVO Description CAT. No. Model Control Unit Emax EVOlution NE249 Lubricating Oil (4 oz.) AA10478 K-211 ELECTER/ESPERT Control Unit Lubricating Oil (32 oz.) Fit to Product Price Price Fit to 1 For Air Motor · Air Line Kit EmaxEVO Power Supply Cord ESPERT ROTUS ESPERT U165013 U166A013 IMPULSE AA10480 K-202 ROTUS For Air Motor · Air Line Kit IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 PRESTO II Lubricating Oil for ECOMO Series (4 oz.) PRESTO II / PRESTO Product iSpeed3 E2530 / E2550 ø1.0"/ø0.98" Description CAT. No. Model PRESTO II / PRESTO Cartridge T815016I PR-03 Fit to iSpeed3 Grease PRESTO II · PRESTO E2530 / E2550 Product E3000 - One Piece FINE BELT SANDER PARTS Product Description CAT. No. Model Fit to KBS1067 TP-12 KBS-100 · EBS-100 1103 TP-12A KBS-101 · EBS-101 KBS1068 TPA-12 KBS-100 · EBS-100 1104 TPA-12A KBS-101 · EBS-101 3 Tension Pulley Assembly MA ø0.897" ø1.0" ø0.98" 1547 — Grease for Reducer (10mL) 1550 — Product Description CAT. No. EO23011 Model Fit to E023011 NK-351 NK-350 · NK-804T ET II NK-260 E037011 NK-151 · NK-261 NK-150 ET II NK-260N Carbon Brush (each 2 pcs.) ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece ARG-011E · ARG-021E · EMA-3020K RAX-271E · RAX-71E E3000 - Modular ø1.18" 1549 — ø1.0"/ø0.98" ø0.897" ARG-011E · ARG-021E · EMA-3020K RAX-271E · RAX-71E E3000 - 80,000rpm 3 Silencer Product Carbon Brush 4 HTS Grease for Reducer (2.5mL) Price Fit to E4000 MS HES810 Model Grease for Reducer (100mL) ø1.18" HES510 CAT. No. Tension Pulley E4000 ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" Description Price ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm SHEENUS neo SONIC CUTTER ECOMO 2 ø0.897" ø1.18" K-268 Price E2530 / E2550 E3000 - Modular 1055 MA Description CAT. No. Model Price Fit to Silencer Large (with Metal Fitting) AA10040 K-209 ROTUS PLANET 550 · AMS-20 · 50 · 150 · 250 · 600 · AM-300 (R · L) · AM-2526 (RA · LA) AM-H2526 (RA · LA) · MSS-19 · 20 · 22 · MS-23 (R · L) · MSS-25 (R) · MSSH-25 (R) · MSST-23 Silencer Small (with Metal Fitting) AA10055 K-208 IMPULSE · MIRACLE AM-300 (RA · LA) · AM-600 · AM-310 · AM-2526 · AM-H2526 (R · L) · MSS-19 · 20 · 22 MS-23 (RA · LA) · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 · ABS-800 · AM-3020 Silencer (with Metal Fitting) AS1546 K-246 AMX-8003 · AMX-8001 Price ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 EO37011 HES810 HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p10 * Order by catalog number. 6-p11 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p12 < PARTS > HOSE < PARTS > HOSE, METAL FITTING, FILTER JOINT & GRINDSTONE FLANGE ETC. Hose List Product 1 Hose List Description Hose 6 ft (INTAKE) CAT. No. Model AA10426 K-206 Fit to Price Product Description EMCD-3000 Air Hose ROTUS IM-301 CAT. No. Model E304052 — Price Fit to 1 EMCD-3000 · EMCD-3000A EmaxEVO 2020 K-207 ESPERT ROTUS IM-300 Metal Fitting & Filter Joint K076211 K-213 IMPULSE & PNEU-SONIC E2530 / E2550 ø1.18" Turbine Hose 6 ft (ø5.1 mm) T815220 K-237 K-238 PRESTO II · PRESTO PRESTO II · PRESTO ø1.0"/ø0.98" ø0.897" ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS AA10411 K-275 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES 2.93" ø0.20" (For K-215 Hose) (For K-259 Hose) AS12036 K-242 (For K-204 Hose) AS12037 K-244 (For K-257 Hose) PRESTO II SHEENUS neo SONIC CUTTER Metal Fitting (for ø6 mm Quick Disconnecting Joint) 2 iSpeed3 Metal Fitting (for ø6 mm Quick Disconnecting Joint) Filter Joint Filter Joint Filter Joint Filter Joint E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 AA82038 (for ø6 mm Quick Disconnecting Joint) FJ-01 AA82039 (for ø6 mm Quick Disconnecting Joint) FJ-02 ø0.897" (For K-206 Hose) (For K-207 Hose) (For K-215 Hose) (For K-247 Hose) (For K-254 Hose) (For K-259 Hose) E3000 - One Piece E3000 - Modular ø1.18" (For K-213 Hose) (For K-204 Hose) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm AA82040 (for ø6 mm Quick Disconnecting Joint) FJ-03 E4000 (For K-257 Hose) 3 AA82053 (for ø8 mm Quick Disconnecting Joint) FJ-04 MA (For K-223 Hose) ø0.897" K-247 EMS-6040 · EMS-6040K · HTS SERIES ø1.0" ø0.98" Hose ø6 mm (O.D.) (INTAKE) 6 ft · Blue K-254 ABS-400 · 800 · 1600 AMS-1210 · AMS-1501 ø1.18" 2059 Hose ø7 mm (O.D.) (INTAKE) 6 ft PL12022 K-257 PLANET 550 · AMS-20 · 50 · 150 · 250 · 600 · 1500 · BANTAM 150 · 250 Hose ø6 mm (O.D.) (INTAKE) 16 ft 2057 K-250 EMS-6040 · EMS-6040K Hose ø8 mm (O.D.) (EXHAUST) 3 ft PL12023 K-258 PLANET 550 · AMS-20 · 50 · 150 · 250 · 600 Hose ø6 mm (O.D.) (INTAKE) 6 ft PL12024 K-259 PLANET 850 · 1500 · 2000 · AMS-1200 K-215 AM-300 (RA · LA) · AM-310 (RA · LA) · AM-2526 (RA · LA) AM-H2526 (RA · LA) · AM-600RA · MSS-19 · 20 · 22 (RA · LA) · MS-23 (RA · LA) · MSST-23 (RA · LA) · MSTN-23 (RA · LA) · MSS-25 (RA · LA) · MSSH-25 (RA · LA) ABS-400 · ABS-800 · ABS-1600 · ABS-70P · PLANET 400 AM-3020 · AMX-50 · AMX-65 · AMX-8008 · SMS400 · 401 PMA-3020A · PMA-3013K · PMA-3013S · PMS-3020K PMS-3020A · PMR-3005K Hose ø6 mm (O.D.) (INTAKE) 6 ft 091140 6020 Hose ø8 mm (O.D.) (EXHAUST) 3 ft 091150 8010 K-216 AM-300 (RA · LA) · AM-310 (RA · LA) · MSS-19 · 20 · 22 MS-23 (RA · LA) · MST-23 (RA · LA) · MSTN-23 (RA · LA) ABS-800 · AM-600RA Hose ø8 mm (O.D.) (INTAKE) 6 ft 2043 K-223 AMX-8003 · AMX-8001 Hose ø8 mm (O.D.) (EXHAUST) 3.94" Hose ø10 mm (O.D.) (EXHAUST) 3.94" Grindstone Flange Product 2052 K-256 AM-2526 (RA · LA) · AM-H2526 (RA · LA) · AM-3020 AMX-50 · AMX-65 · AMX-8008 · MSS-25 (RA · LA) MSSH-25 (RA · LA) · PMA-3013K · PMA-3013S PMR-3005K · PMS-3020A · PMS-3020K *NGF2-19, EGF-19 for right hand (cw) rotation only. Description ø0.75" CAT. No. Model Fit to AS42127 NGF2-19 Grindstone Flange AS2138 NR-311 NR-403E · NR-453E · NR-3060S · EMS-3041 · EMS-3045 EMS-3052 · EMS-3056 · EMS-3060K · EMSF-3060K PMS-3020K · PS23 · PSA25 · PSA35 · PSA30 EGF-19 Specifications Price Applicable Grindstone Dimensions ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm K-224 AMX-8003 · AMX-8001 Hose 6 ft AA12030 K-204 AM-310 (R · L) · AM-600R · AM-2526 (R · L) · AM-H2526 (R · L) MST-23 (R · L) · MSTN-23 (R · L) · MSS-25 (R · L) · MSSH-25 (R · L) MSST-23 (R) · AM-H2525 (R · L)· AM-2525 (R · L) · MS-25 (R) Hose 6 ft 2049 K-221 AM-300 (R · L ) · MSS-19 · 20 · 22 (R) MS-19 · 20 · 22 (R · L ) Air Hose with filter ø6 mm (O.D.) 6 ft 2058 K-251 NE123 · NE145 · NE145-OP1 · NE147 · NE147-800 NE147-400 · NE211 · NE211-OP1 · NE236 · NE246 NE260 · NE273 · NR40-5100 ATC · NR4040-AQC NR50-5100 ATC · NR50-5100 ATC RS · NR-5041E ATC ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES810 Unmounted Vitrified Grindstone for Internal Grinding Product HTS Product dimensions HPS ø0.79" ø0.63" ø0.55" ø0.20" ø0.20" Xpeed 5 ø0.20" AIR LINE KIT (Diamond) Grit #170 Grit #170 CAT. No. PL-10341 PL-10361 Model PDG-14 PDG-16 PDG-20 CAT. No. PL-10351 PL-10371 PL-16455 Model PBG-14 PBG-16 PBG-20 Package PL-16456 6 PARTS 7 1 pc. TECHNICAL DATA Price 2050 MS HES510 (CBN) INDEX 6-p12 For Air Line Kit K-241 IMPULSE 2056 5 AIR LINE KIT 2.80" (for ø6 mm Quick Disconnecting Joint) Price Fit to Hose ø6 mm (O.D.) (INTAKE) 13 ft · Blue HPS Xpeed MIRACLE AS12035 Metal Fitting 0.24" MA Hose for Piping 6 ft with Metal Fitting K-217 ø0.24" 3 AA10425 ø0.31" E4000 Hose 6 ft 2.80" ø1.14" E3000 - 80,000rpm 2.80" Model 0.24" E3000 - Modular Z101240 CAT. No. 0.24" E3000 - One Piece Hose for Piping 6 ft (ø6.0 mm) ø0.24" ø0.897" ø0.24" ø1.0"/ø0.98" E2530 / E2550 1.50" ø0.24" Hose 4.5 ft 1.38" ø0.24" ECOMO 2 iSpeed3 1.30" ø0.26" K-267 ECOMO ø0.18" 2066 K-281 Description ø0.24" Exhaust Air Hose 2077 ø0.24" SHEENUS neo SONIC CUTTER Air Hose with Joint ø0.24" PRESTO II ROTUS Product IMPULSE ø0.26" ROTUS Hose 6 ft (INTAKE, Chip Air Mechanism) ø0.22" ESPERT EmaxEVO 8 APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use * Order by catalog number. 6-p13 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p12 < PARTS > HOSE < PARTS > HOSE, METAL FITTING, FILTER JOINT & GRINDSTONE FLANGE ETC. Hose List Product 1 Hose List Description Hose 6 ft (INTAKE) CAT. No. Model AA10426 K-206 Fit to Price Product Description EMCD-3000 Air Hose ROTUS IM-301 CAT. No. Model E304052 — Price Fit to 1 EMCD-3000 · EMCD-3000A EmaxEVO 2020 K-207 ESPERT ROTUS IM-300 Metal Fitting & Filter Joint K076211 K-213 IMPULSE & PNEU-SONIC E2530 / E2550 ø1.18" Turbine Hose 6 ft (ø5.1 mm) T815220 K-237 K-238 PRESTO II · PRESTO PRESTO II · PRESTO ø1.0"/ø0.98" ø0.897" ø0.897" ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES510 HES810 HTS AA10411 K-275 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES 2.93" ø0.20" (For K-215 Hose) (For K-259 Hose) AS12036 K-242 (For K-204 Hose) AS12037 K-244 (For K-257 Hose) PRESTO II SHEENUS neo SONIC CUTTER Metal Fitting (for ø6 mm Quick Disconnecting Joint) 2 iSpeed3 Metal Fitting (for ø6 mm Quick Disconnecting Joint) Filter Joint Filter Joint Filter Joint Filter Joint E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 AA82038 (for ø6 mm Quick Disconnecting Joint) FJ-01 AA82039 (for ø6 mm Quick Disconnecting Joint) FJ-02 ø0.897" (For K-206 Hose) (For K-207 Hose) (For K-215 Hose) (For K-247 Hose) (For K-254 Hose) (For K-259 Hose) E3000 - One Piece E3000 - Modular ø1.18" (For K-213 Hose) (For K-204 Hose) ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm AA82040 (for ø6 mm Quick Disconnecting Joint) FJ-03 E4000 (For K-257 Hose) 3 AA82053 (for ø8 mm Quick Disconnecting Joint) FJ-04 MA (For K-223 Hose) ø0.897" K-247 EMS-6040 · EMS-6040K · HTS SERIES ø1.0" ø0.98" Hose ø6 mm (O.D.) (INTAKE) 6 ft · Blue K-254 ABS-400 · 800 · 1600 AMS-1210 · AMS-1501 ø1.18" 2059 Hose ø7 mm (O.D.) (INTAKE) 6 ft PL12022 K-257 PLANET 550 · AMS-20 · 50 · 150 · 250 · 600 · 1500 · BANTAM 150 · 250 Hose ø6 mm (O.D.) (INTAKE) 16 ft 2057 K-250 EMS-6040 · EMS-6040K Hose ø8 mm (O.D.) (EXHAUST) 3 ft PL12023 K-258 PLANET 550 · AMS-20 · 50 · 150 · 250 · 600 Hose ø6 mm (O.D.) (INTAKE) 6 ft PL12024 K-259 PLANET 850 · 1500 · 2000 · AMS-1200 K-215 AM-300 (RA · LA) · AM-310 (RA · LA) · AM-2526 (RA · LA) AM-H2526 (RA · LA) · AM-600RA · MSS-19 · 20 · 22 (RA · LA) · MS-23 (RA · LA) · MSST-23 (RA · LA) · MSTN-23 (RA · LA) · MSS-25 (RA · LA) · MSSH-25 (RA · LA) ABS-400 · ABS-800 · ABS-1600 · ABS-70P · PLANET 400 AM-3020 · AMX-50 · AMX-65 · AMX-8008 · SMS400 · 401 PMA-3020A · PMA-3013K · PMA-3013S · PMS-3020K PMS-3020A · PMR-3005K Hose ø6 mm (O.D.) (INTAKE) 6 ft 091140 6020 Hose ø8 mm (O.D.) (EXHAUST) 3 ft 091150 8010 K-216 AM-300 (RA · LA) · AM-310 (RA · LA) · MSS-19 · 20 · 22 MS-23 (RA · LA) · MST-23 (RA · LA) · MSTN-23 (RA · LA) ABS-800 · AM-600RA Hose ø8 mm (O.D.) (INTAKE) 6 ft 2043 K-223 AMX-8003 · AMX-8001 Hose ø8 mm (O.D.) (EXHAUST) 3.94" Hose ø10 mm (O.D.) (EXHAUST) 3.94" Grindstone Flange Product 2052 K-256 AM-2526 (RA · LA) · AM-H2526 (RA · LA) · AM-3020 AMX-50 · AMX-65 · AMX-8008 · MSS-25 (RA · LA) MSSH-25 (RA · LA) · PMA-3013K · PMA-3013S PMR-3005K · PMS-3020A · PMS-3020K *NGF2-19, EGF-19 for right hand (cw) rotation only. Description ø0.75" CAT. No. Model Fit to AS42127 NGF2-19 Grindstone Flange AS2138 NR-311 NR-403E · NR-453E · NR-3060S · EMS-3041 · EMS-3045 EMS-3052 · EMS-3056 · EMS-3060K · EMSF-3060K PMS-3020K · PS23 · PSA25 · PSA35 · PSA30 EGF-19 Specifications Price Applicable Grindstone Dimensions ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm K-224 AMX-8003 · AMX-8001 Hose 6 ft AA12030 K-204 AM-310 (R · L) · AM-600R · AM-2526 (R · L) · AM-H2526 (R · L) MST-23 (R · L) · MSTN-23 (R · L) · MSS-25 (R · L) · MSSH-25 (R · L) MSST-23 (R) · AM-H2525 (R · L)· AM-2525 (R · L) · MS-25 (R) Hose 6 ft 2049 K-221 AM-300 (R · L ) · MSS-19 · 20 · 22 (R) MS-19 · 20 · 22 (R · L ) Air Hose with filter ø6 mm (O.D.) 6 ft 2058 K-251 NE123 · NE145 · NE145-OP1 · NE147 · NE147-800 NE147-400 · NE211 · NE211-OP1 · NE236 · NE246 NE260 · NE273 · NR40-5100 ATC · NR4040-AQC NR50-5100 ATC · NR50-5100 ATC RS · NR-5041E ATC ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 HES810 Unmounted Vitrified Grindstone for Internal Grinding Product HTS Product dimensions HPS ø0.79" ø0.63" ø0.55" ø0.20" ø0.20" Xpeed 5 ø0.20" AIR LINE KIT (Diamond) Grit #170 Grit #170 CAT. No. PL-10341 PL-10361 Model PDG-14 PDG-16 PDG-20 CAT. No. PL-10351 PL-10371 PL-16455 Model PBG-14 PBG-16 PBG-20 Package PL-16456 6 PARTS 7 1 pc. TECHNICAL DATA Price 2050 MS HES510 (CBN) INDEX 6-p12 For Air Line Kit K-241 IMPULSE 2056 5 AIR LINE KIT 2.80" (for ø6 mm Quick Disconnecting Joint) Price Fit to Hose ø6 mm (O.D.) (INTAKE) 13 ft · Blue HPS Xpeed MIRACLE AS12035 Metal Fitting 0.24" MA Hose for Piping 6 ft with Metal Fitting K-217 ø0.24" 3 AA10425 ø0.31" E4000 Hose 6 ft 2.80" ø1.14" E3000 - 80,000rpm 2.80" Model 0.24" E3000 - Modular Z101240 CAT. No. 0.24" E3000 - One Piece Hose for Piping 6 ft (ø6.0 mm) ø0.24" ø0.897" ø0.24" ø1.0"/ø0.98" E2530 / E2550 1.50" ø0.24" Hose 4.5 ft 1.38" ø0.24" ECOMO 2 iSpeed3 1.30" ø0.26" K-267 ECOMO ø0.18" 2066 K-281 Description ø0.24" Exhaust Air Hose 2077 ø0.24" SHEENUS neo SONIC CUTTER Air Hose with Joint ø0.24" PRESTO II ROTUS Product IMPULSE ø0.26" ROTUS Hose 6 ft (INTAKE, Chip Air Mechanism) ø0.22" ESPERT EmaxEVO 8 APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use * Order by catalog number. 6-p13 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p14 < PARTS > SPECIAL ARBOR < PARTS > GRINDSTONE ARBOR *For right hand (cw) rotation only. Special Drill Chuck Arbor Product Description 2.01" 1 For Drill Chuck Jacob's Taper No. 0 Run-out Accuracy : Within 0.05 mm EmaxEVO ESPERT 2.20" ROTUS IMPULSE PRESTO II 2.72" SHEENUS neo SONIC CUTTER CAT. No. Model AS02136 DCH-J0A Special Drill Chuck Arbor Product AS42132 DCH-J0K 1.59" RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · NR-3060S NR-311 · NR-303 · NR-2351 · NR-303P · NR-403E · NR-453E · NR-2551 · NR-H2551 NR-2532 · NR-H2532 · MS-23 · MSS-19 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 EMA-3020K· EMS-3041 · EMS-3052 · EMS-3045 · EMS-3056 · EMS-3060K · EMS-6040 EMS-6040K · EMR-3008K · ABS-70P · HES · PS23 · PSA25 · PSA30 · PSA35 NRL-300 · NRL-300E · PMA-3013K · PMR-3050K · PMS-3020K 1.61" AS42134 DCH-J0N NR-310 1.89" 2 E2530 / E2550 ø1.0"/ø0.98" Product Description 1.99" E2530 / E2550 ø0.897" E3000 - One Piece 2.68" d 1.97" E4000 d 3 MA 2.15" ø0.897" ø1.0" ø0.98" ø1.18" Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm ø1.18" E3000 - 80,000rpm Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm d E3000 - Modular ø1.0"/ø0.98" ø0.897" *For right hand (cw) rotation only. Special Metal Saw Arbor d Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm CAT. No. Model AS02135 2135 2155 AS42133 2133 2154 AS11434 1077 2147 K301085 AS42130A AS42130 2149 KCH-01A (5.0) KCH-01A (6.0) KCH-01A (8.0) KCH-01N (5.0) KCH-01N (6.0) KCH-01N (8.0) KCH-02 (5.0) KCH-02 (6.0) KCH-02 (8.0) KCH-03 (5.0) KCH-03 (6.0) KCH-03 (6.35) KCH-03 (8.0) Fit to MSS-19 · MSS-20 · MSS-22 · PS20-70/120 PS20S-70 · PSA23-80/130 · PSA23S-80 NR-320 Price d 0.43" 4.84" 0.71" Price Fit to 1 ECOMO · IMPULSE EmaxEVO AS11029 AGM-01 Grinding Arbor for Deep Hole ROTUS IMPULSE AS02137 AGM-01A MSS-19 · MSS-20 · MSS-22 · PS20-70/120 PS20S-70 · PSA23-80/130 · PSA23S-80 NR-320 · SMS400 · HPS500 PRESTO II SHEENUS neo SONIC CUTTER ENR-302 AS42131 AGM-03 — — RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · NR-3060S NR-311 · NR-303 · NR-2351 · NR-303P · NR-403E · NR-453E · NR-2551 · NR-H2551 NR-2532 · NR-H2532 · MS-23 · MSS-19 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 EMA-3020K · EMS-3041 · EMS-3052 · EMS-3045 · EMS-3056 · EMS-3060K · EMSF-3060K EMS-6040 · EMS-6040K · EMR-3008K · ABS-70P · HES · PS23 · PSA25 · PSA30 PSA35 · NRL-300 · NRL-300E · PMA-3013K · PMR-3050K · PMS-3020K · HPS250 PY-[][]D (Diamond) BY-[][]B (CBN) ESPERT AMH-300 · AMH-301 NR-600 · NR-601 · SMS401 ø0.4 mm~ø2.3 mm PLANET 2000 PY-[][]L (Blank) ø0.20" iSpeed3 NCH-01 Grindstone Arbor Run-out Accuracy : Within 0.02 mm For Grindstone with ø5.0 mm I.D. ø0.20" NK11045 Grindstone Arbor Run-out Accuracy : Within 0.02 mm For Grindstone with ø5.0 mm I.D. ø0.20" Model Grindstone Arbor Run-out Accuracy : Within 0.02 mm For Grindstone with ø5.0 mm I.D. ø0.20" CAT. No. Grindstone Arbor (for Cup Wheel & Rubber Pad) Special Drill Chuck Arbor For Drill Chuck Jacob's Taper No. 0 Run-out Accuracy : Within 0.05 mm Description 1.14" MSS-19 · MSS-20 · MSS-22 · PS20-70/120 PS20S-70 · PSA23-80/130 · PSA23S-80 NR-320 · SMS400 ENR-302 Special Drill Chuck Arbor For Drill Chuck Jacob's Taper No. 0 Run-out Accuracy : Within 0.05 mm Fit to *For right hand (cw) rotation only. Grindstone Arbor Price 2 iSpeed3 Quoted upon request E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece AS43737 AX-105 E3000 - Modular NR-310 ø1.18" MSTN-23 · NR-310 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 RA-100 · RA-151E · RA-2511 · RA-H2511 3 ENR-302 MA RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · NR-3060S NR-311 · NR-303 · NR-2351 · NR-303P · NR-403E · NR-453E · NR-2551 · NR-H2551 NR-2532 · NR-H2532 · MS-23 · MSS-19 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 EMA-3020K · EMS-3041 · EMS-3052 · EMS-3045 · EMS-3056 · EMS-3060K EMSF-3060K · EMS-6040 · EMS-6040K · EMR-3008K · ABS-70P · PS23 · PSA25 PSA30 · PSA35 · NRL-300 · NRL-300E · PMA-3013K · PMR-3050K · PMS-3020K ø0.897" ø1.0" ø0.98" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p14 * Order by catalog number. 6-p15 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p14 < PARTS > SPECIAL ARBOR < PARTS > GRINDSTONE ARBOR *For right hand (cw) rotation only. Special Drill Chuck Arbor Product Description 2.01" 1 For Drill Chuck Jacob's Taper No. 0 Run-out Accuracy : Within 0.05 mm EmaxEVO ESPERT 2.20" ROTUS IMPULSE PRESTO II 2.72" SHEENUS neo SONIC CUTTER CAT. No. Model AS02136 DCH-J0A Special Drill Chuck Arbor Product AS42132 DCH-J0K 1.59" RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · NR-3060S NR-311 · NR-303 · NR-2351 · NR-303P · NR-403E · NR-453E · NR-2551 · NR-H2551 NR-2532 · NR-H2532 · MS-23 · MSS-19 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 EMA-3020K· EMS-3041 · EMS-3052 · EMS-3045 · EMS-3056 · EMS-3060K · EMS-6040 EMS-6040K · EMR-3008K · ABS-70P · HES · PS23 · PSA25 · PSA30 · PSA35 NRL-300 · NRL-300E · PMA-3013K · PMR-3050K · PMS-3020K 1.61" AS42134 DCH-J0N NR-310 1.89" 2 E2530 / E2550 ø1.0"/ø0.98" Product Description 1.99" E2530 / E2550 ø0.897" E3000 - One Piece 2.68" d 1.97" E4000 d 3 MA 2.15" ø0.897" ø1.0" ø0.98" ø1.18" Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm ø1.18" E3000 - 80,000rpm Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm d E3000 - Modular ø1.0"/ø0.98" ø0.897" *For right hand (cw) rotation only. Special Metal Saw Arbor d Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm Special Metal Saw Arbor Dimensions of Metal Saw ød (I.D) x ø1.18" (O.D.) Run-out Accuracy : Within 0.02 mm CAT. No. Model AS02135 2135 2155 AS42133 2133 2154 AS11434 1077 2147 K301085 AS42130A AS42130 2149 KCH-01A (5.0) KCH-01A (6.0) KCH-01A (8.0) KCH-01N (5.0) KCH-01N (6.0) KCH-01N (8.0) KCH-02 (5.0) KCH-02 (6.0) KCH-02 (8.0) KCH-03 (5.0) KCH-03 (6.0) KCH-03 (6.35) KCH-03 (8.0) Fit to MSS-19 · MSS-20 · MSS-22 · PS20-70/120 PS20S-70 · PSA23-80/130 · PSA23S-80 NR-320 Price d 0.43" 4.84" 0.71" Price Fit to 1 ECOMO · IMPULSE EmaxEVO AS11029 AGM-01 Grinding Arbor for Deep Hole ROTUS IMPULSE AS02137 AGM-01A MSS-19 · MSS-20 · MSS-22 · PS20-70/120 PS20S-70 · PSA23-80/130 · PSA23S-80 NR-320 · SMS400 · HPS500 PRESTO II SHEENUS neo SONIC CUTTER ENR-302 AS42131 AGM-03 — — RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · NR-3060S NR-311 · NR-303 · NR-2351 · NR-303P · NR-403E · NR-453E · NR-2551 · NR-H2551 NR-2532 · NR-H2532 · MS-23 · MSS-19 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 EMA-3020K · EMS-3041 · EMS-3052 · EMS-3045 · EMS-3056 · EMS-3060K · EMSF-3060K EMS-6040 · EMS-6040K · EMR-3008K · ABS-70P · HES · PS23 · PSA25 · PSA30 PSA35 · NRL-300 · NRL-300E · PMA-3013K · PMR-3050K · PMS-3020K · HPS250 PY-[][]D (Diamond) BY-[][]B (CBN) ESPERT AMH-300 · AMH-301 NR-600 · NR-601 · SMS401 ø0.4 mm~ø2.3 mm PLANET 2000 PY-[][]L (Blank) ø0.20" iSpeed3 NCH-01 Grindstone Arbor Run-out Accuracy : Within 0.02 mm For Grindstone with ø5.0 mm I.D. ø0.20" NK11045 Grindstone Arbor Run-out Accuracy : Within 0.02 mm For Grindstone with ø5.0 mm I.D. ø0.20" Model Grindstone Arbor Run-out Accuracy : Within 0.02 mm For Grindstone with ø5.0 mm I.D. ø0.20" CAT. No. Grindstone Arbor (for Cup Wheel & Rubber Pad) Special Drill Chuck Arbor For Drill Chuck Jacob's Taper No. 0 Run-out Accuracy : Within 0.05 mm Description 1.14" MSS-19 · MSS-20 · MSS-22 · PS20-70/120 PS20S-70 · PSA23-80/130 · PSA23S-80 NR-320 · SMS400 ENR-302 Special Drill Chuck Arbor For Drill Chuck Jacob's Taper No. 0 Run-out Accuracy : Within 0.05 mm Fit to *For right hand (cw) rotation only. Grindstone Arbor Price 2 iSpeed3 Quoted upon request E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" E3000 - One Piece AS43737 AX-105 E3000 - Modular NR-310 ø1.18" MSTN-23 · NR-310 ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 RA-100 · RA-151E · RA-2511 · RA-H2511 3 ENR-302 MA RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · NR-3060S NR-311 · NR-303 · NR-2351 · NR-303P · NR-403E · NR-453E · NR-2551 · NR-H2551 NR-2532 · NR-H2532 · MS-23 · MSS-19 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 EMA-3020K · EMS-3041 · EMS-3052 · EMS-3045 · EMS-3056 · EMS-3060K EMSF-3060K · EMS-6040 · EMS-6040K · EMR-3008K · ABS-70P · PS23 · PSA25 PSA30 · PSA35 · NRL-300 · NRL-300E · PMA-3013K · PMR-3050K · PMS-3020K ø0.897" ø1.0" ø0.98" ø1.18" MS MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 4 HES510 HES510 HES810 HES810 HTS HTS HPS HPS Xpeed Xpeed 5 5 AIR LINE KIT AIR LINE KIT 6 6 PARTS PARTS 7 7 TECHNICAL DATA TECHNICAL DATA 8 8 APPLICATION EXAMPLES APPLICATION EXAMPLES INDEX INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p14 * Order by catalog number. 6-p15 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p16 < PARTS > WRENCH Wrench List Wrench List Product Description CAT. No. Model Price Fit to Description CAT. No. Model 3.35" 1.09" 1 Product Chuck Wrench RE10389 K-232 MFC-300S · MFC-300M Pin Wrench RE22014 K-233 EmaxEVO ESPERT Chuck Wrench RE10394 K-231 ROTUS IMPULSE 2.36" PRESTO II SHEENUS neo SONIC CUTTER 2 IC-300 · KC-300 · EIC-300 · EKC-300 IC-E · KC-E Wrench 4 x 7 mm (0.16" x 0.28") (for K-231) 2068 — Bar Wrench (2.83") RE22015 K-212 HG-200 · HA-500 · EHG-400 · ECOMO · IMPULSE Bar Wrench (3.94") RE82046 K-236 2073 K-277 Bar Wrench IC-300 · KC-300 · EIC-300 · EKC-300 IC-E · KC-E 2.44" Pin Wrench HR10303 T-751 3.19" Price Specifications · Fit to NK-351 · ENK-410S · IH-300 · IR-310 · HG-200 SR-300 · BMH-300 · MH-300 · MFC-300S MFC-300M · IC-300 · IC-E · KC-300 · KC-E K-042 · RG-01 · RG-02 · CN-01 · IM-301 · IM-300 PRESTO II / PRESTO · HI-RITE NR-3080 ESPERT ROTUS IMPULSE PLANET 550 · BANTAM 150 AMS-150 · AMS-600 PL10618 K-222 Allen Wrench (1.5 mm) — — ML-2 · ML-4 · ML-8 · EML-8 · SLS-16 ECOMO · IMPULSE · SONIC-CUTTER NR-260E ATC · NR-5041E ATC · NRA-5080 · NRAF-5080 NR50-5100 ATC · NR50-5100 ATC RS · NR40-5100 ATC Allen Wrench (2 mm) — — LS-100 · NLS-110 · ELS-100 Xpeed1600 Allen Wrench (2.5 mm) — — SHEENUS· SHEENUS neo Allen Wrench (3 mm) — — KBS-101 · NLS-110 · EBS-101 E2530 / E2550 Allen Wrench (6 mm) — — PST50 · PST60 E2530 / E2550 Wrench with Handle (8 mm) LS22016 K-248 Length : 4.09" Wrench with Handle (10 mm) LS22017 K-249 Length : 4.13" ABS-1600 Pin Wrench PRESTO II Bar Wrench for Straight Type ECOMO ø1.0"/ø0.98" E2530 / E2550 2067 PCR-30 ABS-1600 1.77" Wrench K-220 E3000 - Modular ø1.18" K-220 2.34" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Wrench 6 x 4.5 mm (0.24" x 0.18") RE22001 Wrench 6.1 x 8 mm (0.24" x 0.31") 2069 — 2.34" E4000 3 MA PL10622 3.15" ø0.897" Wrench 7 x 5.1 mm (0.28" x 0.20") RE10207 Z103117 — ø1.0" ø0.98" ø1.18" 3.15" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 3.15" RE10290 — Wrench 8 x 5 mm (0.31" x 0.20") Wrench 10 x 10 mm (0.39" x 0.39") Wrench 9 x 11 mm (0.35" x 0.43") (Length 3.54") 5 6 Wrench 12 x 14 mm (0.47" x 0.55") (Length 3.94") PARTS INDEX ø1.0"/ø0.98" ø0.897" Wrench (10 mm) — Available in the market — SHEENUS · SHEENUS neo — EM-4040 · EM-4040A · EM-4020 EM-4020A · NR-4040 · NR4040-AQC NRR4040-QC — EHR-500 · IR-310 E400Z · E500Z · E800Z RA12012 2064 E3000 - 80,000rpm E4000 Wrench (36 mm) L Shaped Wrench (9 mm) 2080 2055 3 MA ø0.897" ø1.0" ø0.98" ø1.18" Xpeed1600 Contact NSK AMS-250 · AMS-1210 · AMS-1501 · iSpeed3 · EMA-3020S · EM20-S6000 EM25-S6000 · EMS-3060A · HES810 · HPS500 · HTS MSS-19 · 20 · 22 · NR-320 · NRA-5080 · NRR-2650 PLANET 850 · PLANET 1500 · PMS-3020A · PMA-3013S · RA-100 RA-151E · RA-200 · RA-271E · RA-2511 · RA-2521 · SMS400 · SMS401 Torque Wrench Head (14 mm) 2081 — Xpeed1200 Contact NSK — ECOMO · IG-400 Torque Wrench — — HG-200 · EHG-400 PLANET 550 · PLANET 850 · PLANET 1500 · BANTAM 150 BANTAM 250 · NR-301 · AMS-150 · 250 · 600 · ABS-800 HES-50/40 RA · NR-320 · PS20 · NRA-5080 · SMS400 NR-5041E ATC · NRR-2651 · HPS500 — AMS-1210 · 1501 · EM20-S6000 · EM25-S6000 · EMS-3060A HTS · HES810 · iSpeed3 · MSS-19 · 20 · 22 · NR-5041E ATC NR40-5100 ATC · NR50-5100 ATC· NR50-5100 ATCRS · PMS-3020A · SMS401 AIR LINE KIT — NR-302 · ENR-302 ABS-400 · ABS-800 · ABS-70P · AMS-20 · AMS-50 · AMX-50 · AMX-6510 · AMX-8008 EM30-S6000 · EMS-6040 · EMS-6040K · EMS-3060K · EMSF-3060K · EMS · EMR-3008K EMA-3020K · HES510 · HPS250 NR-2351 · NR-401E · NR-311 · NR-303 · NR-3060S · NR-3080S ·NR-303P · NRAF-5080 NR-2532 · NR-H2532· NR-2551 · NR-H2551 · NR-403E · NR-453E · NR50-5100 ATC NR50-5100 ATC RS · MS-23 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 · NRL-300E NRL-300 · PLANET 400 · PMS-3020K · PS23 · PSA23 · PSA25 · PSA30 · PSA35 RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · RA-H2530 PMR-3005K · PMA-3013K · Xpeed1200 TECHNICAL DATA — MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 — Xpeed1600 · Xpeed1200 Contact NSK HES510 HES810 RA10406 2054 AS42026 L Wrench 15 x 17 mm (0.59" x 0.67") (Length 4.53") 2048 — IG-400 AMX-6501 · AMX-6503 · PSA40 · BMS-4020 BMS-4020RA · BMS-4040 · BMS-4040RA · NR-4040 Wrench 16 x 18 mm (0.63" x 0.71") (Length 4.92") 2047 — EMS-6040 · EMS-6040K · PSA35 Wrench 20 x 24 mm (0.79" x 0.94") (Length 5.91") RA12018 Wrench 22 x 27 mm (0.87" x 1.06") (Length 6.69") 6-p16 RA-100 · RA-151E · RA-2511 RA-H2510 ø1.18" — AIR LINE KIT 8 IH-300 · IR-310 · ERA-270 · BMH-300 · MH-300 HA-500 · EHR-401 · EHL-401 · EHR-500 · VH-E NRR-2650 · NR-600 · NR-601 · AMH-300 · AMH-301 · RA-200 · RA-271E RA-2521 · RA-H2520 · NR-3080 · ABS-1600 · EMA-3020S · PMA-3013S E3000 - Modular 2082 Xpeed APPLICATION EXAMPLES NRR-2651 · NR40-5100 ATC NRR-3060 · EMA-3020S ø0.897" Torque Wrench Head (10 mm) 3.05" HPS 7 BMH-300 · MH-300 NR-600 · NR-601 · AMH-300 · AMH-301 iSpeed3 E3000 - One Piece ERA-270 · K-042 · ECOMO · IMPULSE Wrench 9 x 9 mm (0.35" x 0.35") HES810 TECHNICAL DATA PLANET 2000 2 ø1.0"/ø0.98" 3.07" HES510 HTS Wrench 7 x 5.5 mm (0.28" x 0.22") Available in the market ECOMO · IG-400 ø0.897" E3000 - One Piece SHEENUS neo SONIC CUTTER Xpeed1600 iSpeed3 E2530 / E2550 1 EmaxEVO RA12045 — NR-302 · EIC-300 · EKC-300 · ERA-270 MA SERIES · AM-300 · AM-310 · AM-600 · NR-2351 NR-301 · NR-303 · NR-600 · NR-601 · RAS-101 · RA-100 RA-200 · NR-311 · AMH-300 · AMH-301 · MSTN-23 · PSA45 PSA60 · NRL-300 · NRL-300E · AMX-8001 · AMX-8003 — AM-2526 · AM-H2526 · AM-3020 · AMX-6501 · AMX-6503 BMS-4020 · BMS-4020RA · BMS-4040 · BMS-4040RA EM25-5000-J4 · EM-3060 · EM-3060J · EM25N-5000-J4 · EM-805 · EM-3080J · EM-3030J MA ø25 , ø25.4 , ø30mm · NR-2532 · NR-H2532 · NR-2551/H2551 · NR-3080S NR-3060S · NR-403E · NR-4040 · NR-453E · NRAF-5080 NRR-2651 · NRR-3060 · NRR3060-QC · PSA40 · PSA45 · PSA50 · PSA60 · PST50 · PST60 RA-151E · RA-271E · RAS-151E· RAX-271E · RAX-71E HTS HPS Xpeed 5 6 PARTS 7 8 APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use * Order by catalog number. 6-p17 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p16 < PARTS > WRENCH Wrench List Wrench List Product Description CAT. No. Model Price Fit to Description CAT. No. Model 3.35" 1.09" 1 Product Chuck Wrench RE10389 K-232 MFC-300S · MFC-300M Pin Wrench RE22014 K-233 EmaxEVO ESPERT Chuck Wrench RE10394 K-231 ROTUS IMPULSE 2.36" PRESTO II SHEENUS neo SONIC CUTTER 2 IC-300 · KC-300 · EIC-300 · EKC-300 IC-E · KC-E Wrench 4 x 7 mm (0.16" x 0.28") (for K-231) 2068 — Bar Wrench (2.83") RE22015 K-212 HG-200 · HA-500 · EHG-400 · ECOMO · IMPULSE Bar Wrench (3.94") RE82046 K-236 2073 K-277 Bar Wrench IC-300 · KC-300 · EIC-300 · EKC-300 IC-E · KC-E 2.44" Pin Wrench HR10303 T-751 3.19" Price Specifications · Fit to NK-351 · ENK-410S · IH-300 · IR-310 · HG-200 SR-300 · BMH-300 · MH-300 · MFC-300S MFC-300M · IC-300 · IC-E · KC-300 · KC-E K-042 · RG-01 · RG-02 · CN-01 · IM-301 · IM-300 PRESTO II / PRESTO · HI-RITE NR-3080 ESPERT ROTUS IMPULSE PLANET 550 · BANTAM 150 AMS-150 · AMS-600 PL10618 K-222 Allen Wrench (1.5 mm) — — ML-2 · ML-4 · ML-8 · EML-8 · SLS-16 ECOMO · IMPULSE · SONIC-CUTTER NR-260E ATC · NR-5041E ATC · NRA-5080 · NRAF-5080 NR50-5100 ATC · NR50-5100 ATC RS · NR40-5100 ATC Allen Wrench (2 mm) — — LS-100 · NLS-110 · ELS-100 Xpeed1600 Allen Wrench (2.5 mm) — — SHEENUS· SHEENUS neo Allen Wrench (3 mm) — — KBS-101 · NLS-110 · EBS-101 E2530 / E2550 Allen Wrench (6 mm) — — PST50 · PST60 E2530 / E2550 Wrench with Handle (8 mm) LS22016 K-248 Length : 4.09" Wrench with Handle (10 mm) LS22017 K-249 Length : 4.13" ABS-1600 Pin Wrench PRESTO II Bar Wrench for Straight Type ECOMO ø1.0"/ø0.98" E2530 / E2550 2067 PCR-30 ABS-1600 1.77" Wrench K-220 E3000 - Modular ø1.18" K-220 2.34" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm Wrench 6 x 4.5 mm (0.24" x 0.18") RE22001 Wrench 6.1 x 8 mm (0.24" x 0.31") 2069 — 2.34" E4000 3 MA PL10622 3.15" ø0.897" Wrench 7 x 5.1 mm (0.28" x 0.20") RE10207 Z103117 — ø1.0" ø0.98" ø1.18" 3.15" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 3.15" RE10290 — Wrench 8 x 5 mm (0.31" x 0.20") Wrench 10 x 10 mm (0.39" x 0.39") Wrench 9 x 11 mm (0.35" x 0.43") (Length 3.54") 5 6 Wrench 12 x 14 mm (0.47" x 0.55") (Length 3.94") PARTS INDEX ø1.0"/ø0.98" ø0.897" Wrench (10 mm) — Available in the market — SHEENUS · SHEENUS neo — EM-4040 · EM-4040A · EM-4020 EM-4020A · NR-4040 · NR4040-AQC NRR4040-QC — EHR-500 · IR-310 E400Z · E500Z · E800Z RA12012 2064 E3000 - 80,000rpm E4000 Wrench (36 mm) L Shaped Wrench (9 mm) 2080 2055 3 MA ø0.897" ø1.0" ø0.98" ø1.18" Xpeed1600 Contact NSK AMS-250 · AMS-1210 · AMS-1501 · iSpeed3 · EMA-3020S · EM20-S6000 EM25-S6000 · EMS-3060A · HES810 · HPS500 · HTS MSS-19 · 20 · 22 · NR-320 · NRA-5080 · NRR-2650 PLANET 850 · PLANET 1500 · PMS-3020A · PMA-3013S · RA-100 RA-151E · RA-200 · RA-271E · RA-2511 · RA-2521 · SMS400 · SMS401 Torque Wrench Head (14 mm) 2081 — Xpeed1200 Contact NSK — ECOMO · IG-400 Torque Wrench — — HG-200 · EHG-400 PLANET 550 · PLANET 850 · PLANET 1500 · BANTAM 150 BANTAM 250 · NR-301 · AMS-150 · 250 · 600 · ABS-800 HES-50/40 RA · NR-320 · PS20 · NRA-5080 · SMS400 NR-5041E ATC · NRR-2651 · HPS500 — AMS-1210 · 1501 · EM20-S6000 · EM25-S6000 · EMS-3060A HTS · HES810 · iSpeed3 · MSS-19 · 20 · 22 · NR-5041E ATC NR40-5100 ATC · NR50-5100 ATC· NR50-5100 ATCRS · PMS-3020A · SMS401 AIR LINE KIT — NR-302 · ENR-302 ABS-400 · ABS-800 · ABS-70P · AMS-20 · AMS-50 · AMX-50 · AMX-6510 · AMX-8008 EM30-S6000 · EMS-6040 · EMS-6040K · EMS-3060K · EMSF-3060K · EMS · EMR-3008K EMA-3020K · HES510 · HPS250 NR-2351 · NR-401E · NR-311 · NR-303 · NR-3060S · NR-3080S ·NR-303P · NRAF-5080 NR-2532 · NR-H2532· NR-2551 · NR-H2551 · NR-403E · NR-453E · NR50-5100 ATC NR50-5100 ATC RS · MS-23 · MSST-23 · MSTN-23 · MSS-25 · MSSH-25 · NRL-300E NRL-300 · PLANET 400 · PMS-3020K · PS23 · PSA23 · PSA25 · PSA30 · PSA35 RAS-101 · RAS-151E · RAX-271E · RAX-71E · RAS-2511 · RAS-H2511 · RA-H2530 PMR-3005K · PMA-3013K · Xpeed1200 TECHNICAL DATA — MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" 4 — Xpeed1600 · Xpeed1200 Contact NSK HES510 HES810 RA10406 2054 AS42026 L Wrench 15 x 17 mm (0.59" x 0.67") (Length 4.53") 2048 — IG-400 AMX-6501 · AMX-6503 · PSA40 · BMS-4020 BMS-4020RA · BMS-4040 · BMS-4040RA · NR-4040 Wrench 16 x 18 mm (0.63" x 0.71") (Length 4.92") 2047 — EMS-6040 · EMS-6040K · PSA35 Wrench 20 x 24 mm (0.79" x 0.94") (Length 5.91") RA12018 Wrench 22 x 27 mm (0.87" x 1.06") (Length 6.69") 6-p16 RA-100 · RA-151E · RA-2511 RA-H2510 ø1.18" — AIR LINE KIT 8 IH-300 · IR-310 · ERA-270 · BMH-300 · MH-300 HA-500 · EHR-401 · EHL-401 · EHR-500 · VH-E NRR-2650 · NR-600 · NR-601 · AMH-300 · AMH-301 · RA-200 · RA-271E RA-2521 · RA-H2520 · NR-3080 · ABS-1600 · EMA-3020S · PMA-3013S E3000 - Modular 2082 Xpeed APPLICATION EXAMPLES NRR-2651 · NR40-5100 ATC NRR-3060 · EMA-3020S ø0.897" Torque Wrench Head (10 mm) 3.05" HPS 7 BMH-300 · MH-300 NR-600 · NR-601 · AMH-300 · AMH-301 iSpeed3 E3000 - One Piece ERA-270 · K-042 · ECOMO · IMPULSE Wrench 9 x 9 mm (0.35" x 0.35") HES810 TECHNICAL DATA PLANET 2000 2 ø1.0"/ø0.98" 3.07" HES510 HTS Wrench 7 x 5.5 mm (0.28" x 0.22") Available in the market ECOMO · IG-400 ø0.897" E3000 - One Piece SHEENUS neo SONIC CUTTER Xpeed1600 iSpeed3 E2530 / E2550 1 EmaxEVO RA12045 — NR-302 · EIC-300 · EKC-300 · ERA-270 MA SERIES · AM-300 · AM-310 · AM-600 · NR-2351 NR-301 · NR-303 · NR-600 · NR-601 · RAS-101 · RA-100 RA-200 · NR-311 · AMH-300 · AMH-301 · MSTN-23 · PSA45 PSA60 · NRL-300 · NRL-300E · AMX-8001 · AMX-8003 — AM-2526 · AM-H2526 · AM-3020 · AMX-6501 · AMX-6503 BMS-4020 · BMS-4020RA · BMS-4040 · BMS-4040RA EM25-5000-J4 · EM-3060 · EM-3060J · EM25N-5000-J4 · EM-805 · EM-3080J · EM-3030J MA ø25 , ø25.4 , ø30mm · NR-2532 · NR-H2532 · NR-2551/H2551 · NR-3080S NR-3060S · NR-403E · NR-4040 · NR-453E · NRAF-5080 NRR-2651 · NRR-3060 · NRR3060-QC · PSA40 · PSA45 · PSA50 · PSA60 · PST50 · PST60 RA-151E · RA-271E · RAS-151E· RAX-271E · RAX-71E HTS HPS Xpeed 5 6 PARTS 7 8 APPLICATION EXAMPLES INDEX indicates Hand Grinder use indicates Machine Spindle use * Order by catalog number. 6-p17 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p18 < PARTS > GRIP RING < PARTS > SPLIT BUSHING Split Bushing : Bushings to allow smaller dia. spindles to be mounted in larger dia. holders GRIP RING Description The Grip Ring is an adjustable position split type flange for •40mm and 30mm spindles. The Grip Ring can easily mounted or removed from any •CNC machine or specialty machine tool block or tool post. Eliminates chance of over tightening and damaging the •spindle in thethesleeve during installation. 1 EmaxEVO ESPERT ROTUS IMPULSE CAT. No. 1871 Model RB-22.8x25 I.D. O.D. ø0.897" ø0.98" (ø22.8 mm) (ø25 mm) Length 44 mm Fit to Price 1 RA-100 EmaxEVO 1872 RBS-22.8x25 ø0.897" ø0.98" (ø22.8 mm) (ø25 mm) 25 mm ESPERT NR-303 · NR-2351 NR-311 · AMH-301 RA-200 · RAS-101 ROTUS IMPULSE PRESTO II PRESTO II Caution SHEENUS neo SONIC CUTTER Do not remove the Lock Bolt. If the Lock Bolt is removed, the Washer inside may move. Once the Washer is moved, it may make it impossible to attach the Lock Bolt. 2 Do not remove the spindle while the Grip Ring is attached to the machines' holder. This may cause deformation and / or damage to the Grip Ring. iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 1873 RB-22.8x25.4 ø1.0" ø0.897" (ø22.8 mm) (ø25.4 mm) 44 mm RA-100 1874 RBS-22.8x25.4 ø1.0" ø0.897" (ø22.8 mm) (ø25.4 mm) 25 mm NR-303 · NR-2351 NR-311 · AMH-301 RA-200 · RAS-101 RB-20x23 ø0.79" ø0.91" (ø20 mm) (ø23 mm) 40 mm E3000 - One Piece E3000 - Modular ø1.18" CAT. No. ø1.0"/ø0.98" ø0.897" 1885 GRIP RING GR-30 1876 RB-20x22.8 E3000 - 80,000rpm E4000 Lock Bolt (M5) Washer Screw hole for removal (M5) X 1877 ø0.79" ø0.897" (ø20 mm) (ø22.8 mm) RB-20x22 ø0.79" ø0.87" (ø20 mm) (ø22 mm) RB-20x25 ø0.79" ø0.98" (ø20 mm) (ø25 mm) 40 mm ø30mm (ø1.18") ø2.35" " .77 ø1 ø0.897" 0.24" Mounting Bolt (Accessories) (M5x25L) 0.98" Section X-X 4 E3000 - Modular EM20-S6000 MSS2030 · MSS2008 MSS2002 40 mm 40 mm EM20-S6000 MSS2030 · MSS2008 MSS2002 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" 12 0 X ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.897" E3000 - One Piece ø1.0" ø0.98" ø1.18" MS 1878 ø1.0"/ø0.98" E2530 / E2550 0 12 ø1.0" ø0.98" iSpeed3 EM20-S6000 MSS2030 · MSS2008 MSS2002 EM20-S6000 MSS2030 · MSS2008 MSS2002 3 MA 2 E2530 / E2550 1875 ø0.897" SHEENUS neo SONIC CUTTER CAT. No. Model 1885 GR-30 Standard Equipment · Accessories Price 1879 1880 RB-20x25.4 RB-30x32 ø0.79" ø1.0" (ø20 mm) (ø25.4 mm) ø1.18" ø1.26" (ø30 mm) (ø32 mm) 40 mm 45 mm EM20-S6000 MSS2030 · MSS2008 MSS2002 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" NR-3060S NR-453E · NR-403E 4 • Mounting Bolt (M5x25) : 3 pcs. HES510 1881 HES810 RB-30x36 ø1.42" ø1.18" (ø30 mm) (ø36 mm) 45 mm HES510 NR-3060S NR-453E · NR-403E HES810 HTS HPS HTS CAT. No. 1886 GRIP RING GR-40 1883 RB-22x25x34L Xpeed 5 Lock Bolt (M5) Washer AIR LINE KIT " 17 ø 2. 8 INDEX ø0.87" ø1.0" 33.5 mm (ø22 mm) (ø25.4 mm) BM-322 · BM-322FL · BM-322FR Xpeed Note : After inserting spindle into bushing, verify the O.D. measurement vs. the machine holder I.D. 45 7 (1.53") TECHNICAL DATA APPLICATION EXAMPLES RB-22x25.4x34L X 0.31" 1.10" Section X-X CAT. No. Model 1886 GR-40 5 AIR LINE KIT PARTS 7 Mounting Bolt (Accessories) (M5x30L) Standard Equipment · Accessories HPS 6 ø40mm (ø1.57") ø2.75" (1.53") PARTS 1884 BM-322 · BM-322FL · BM-322FR 45 6 Screw hole for removal (M5) X ø0.87" ø0.98" 33.5 mm (ø22 mm) (ø25 mm) TECHNICAL DATA 8 Price APPLICATION EXAMPLES • Mounting Bolt (M5x30) : 4 pcs. INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p18 * Order by catalog number. 6-p19 6-p0-19_Parts_1408.qxd 14.8.1 8:50 PM ページ 6-p18 < PARTS > GRIP RING < PARTS > SPLIT BUSHING Split Bushing : Bushings to allow smaller dia. spindles to be mounted in larger dia. holders GRIP RING Description The Grip Ring is an adjustable position split type flange for •40mm and 30mm spindles. The Grip Ring can easily mounted or removed from any •CNC machine or specialty machine tool block or tool post. Eliminates chance of over tightening and damaging the •spindle in thethesleeve during installation. 1 EmaxEVO ESPERT ROTUS IMPULSE CAT. No. 1871 Model RB-22.8x25 I.D. O.D. ø0.897" ø0.98" (ø22.8 mm) (ø25 mm) Length 44 mm Fit to Price 1 RA-100 EmaxEVO 1872 RBS-22.8x25 ø0.897" ø0.98" (ø22.8 mm) (ø25 mm) 25 mm ESPERT NR-303 · NR-2351 NR-311 · AMH-301 RA-200 · RAS-101 ROTUS IMPULSE PRESTO II PRESTO II Caution SHEENUS neo SONIC CUTTER Do not remove the Lock Bolt. If the Lock Bolt is removed, the Washer inside may move. Once the Washer is moved, it may make it impossible to attach the Lock Bolt. 2 Do not remove the spindle while the Grip Ring is attached to the machines' holder. This may cause deformation and / or damage to the Grip Ring. iSpeed3 E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 1873 RB-22.8x25.4 ø1.0" ø0.897" (ø22.8 mm) (ø25.4 mm) 44 mm RA-100 1874 RBS-22.8x25.4 ø1.0" ø0.897" (ø22.8 mm) (ø25.4 mm) 25 mm NR-303 · NR-2351 NR-311 · AMH-301 RA-200 · RAS-101 RB-20x23 ø0.79" ø0.91" (ø20 mm) (ø23 mm) 40 mm E3000 - One Piece E3000 - Modular ø1.18" CAT. No. ø1.0"/ø0.98" ø0.897" 1885 GRIP RING GR-30 1876 RB-20x22.8 E3000 - 80,000rpm E4000 Lock Bolt (M5) Washer Screw hole for removal (M5) X 1877 ø0.79" ø0.897" (ø20 mm) (ø22.8 mm) RB-20x22 ø0.79" ø0.87" (ø20 mm) (ø22 mm) RB-20x25 ø0.79" ø0.98" (ø20 mm) (ø25 mm) 40 mm ø30mm (ø1.18") ø2.35" " .77 ø1 ø0.897" 0.24" Mounting Bolt (Accessories) (M5x25L) 0.98" Section X-X 4 E3000 - Modular EM20-S6000 MSS2030 · MSS2008 MSS2002 40 mm 40 mm EM20-S6000 MSS2030 · MSS2008 MSS2002 ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 3 MA ø0.897" 12 0 X ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" ø0.897" E3000 - One Piece ø1.0" ø0.98" ø1.18" MS 1878 ø1.0"/ø0.98" E2530 / E2550 0 12 ø1.0" ø0.98" iSpeed3 EM20-S6000 MSS2030 · MSS2008 MSS2002 EM20-S6000 MSS2030 · MSS2008 MSS2002 3 MA 2 E2530 / E2550 1875 ø0.897" SHEENUS neo SONIC CUTTER CAT. No. Model 1885 GR-30 Standard Equipment · Accessories Price 1879 1880 RB-20x25.4 RB-30x32 ø0.79" ø1.0" (ø20 mm) (ø25.4 mm) ø1.18" ø1.26" (ø30 mm) (ø32 mm) 40 mm 45 mm EM20-S6000 MSS2030 · MSS2008 MSS2002 ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" NR-3060S NR-453E · NR-403E 4 • Mounting Bolt (M5x25) : 3 pcs. HES510 1881 HES810 RB-30x36 ø1.42" ø1.18" (ø30 mm) (ø36 mm) 45 mm HES510 NR-3060S NR-453E · NR-403E HES810 HTS HPS HTS CAT. No. 1886 GRIP RING GR-40 1883 RB-22x25x34L Xpeed 5 Lock Bolt (M5) Washer AIR LINE KIT " 17 ø 2. 8 INDEX ø0.87" ø1.0" 33.5 mm (ø22 mm) (ø25.4 mm) BM-322 · BM-322FL · BM-322FR Xpeed Note : After inserting spindle into bushing, verify the O.D. measurement vs. the machine holder I.D. 45 7 (1.53") TECHNICAL DATA APPLICATION EXAMPLES RB-22x25.4x34L X 0.31" 1.10" Section X-X CAT. No. Model 1886 GR-40 5 AIR LINE KIT PARTS 7 Mounting Bolt (Accessories) (M5x30L) Standard Equipment · Accessories HPS 6 ø40mm (ø1.57") ø2.75" (1.53") PARTS 1884 BM-322 · BM-322FL · BM-322FR 45 6 Screw hole for removal (M5) X ø0.87" ø0.98" 33.5 mm (ø22 mm) (ø25 mm) TECHNICAL DATA 8 Price APPLICATION EXAMPLES • Mounting Bolt (M5x30) : 4 pcs. INDEX indicates Hand Grinder use indicates Machine Spindle use 6-p18 * Order by catalog number. 6-p19