Transcript
Technical
Sensors, Pressure – A62 Type: Overpressure: Temperature: Accuracy: Seal: Tread: IP Rating: Connector:
2 wire, 4 to 20mA (@ 10 to 33V DC) 2x fs –25ºC to 80ºC (temperature compensated) +-0.5% FPM Viton G1/4” DIN3852 Form E Inox 1.4305 stainless IP65 DIN EN 175301-803-C 24
Conformity: 3 3
Sensor + Connector
1 2
Part No.
Range:
Y07CM14.00 Y07CM15.00 Y07CM66.00 Y04CM29.00 Y07CM67.00 Y08CM30.00 Y07CM68.00
0 to -1.0 bar.g 0 to 2.0 bar.g 0 to 5.0 bar.g 0 to 16.0 bar.g 0 to 60.0 bar.g 0 to 400 bar.g 0 to 600 bar.g
1
57
36 3
1 Y07CM14.00 & Y08CM23.00 4mA = 0.0bar.g (atmosphere) 20mA = -1.0bar.g (vacuum)
19A/F
G¼“
Pre-wired with 3m Cable Part No.
Range:
Y08CM23.00 Y08CM24.00 Y08CM25.00 Y04CM71.00 Y08CM26.00 Y08CM28.00 Y08CM27.00
0 to -1.0 bar.g 0 to 2.0 bar.g 0 to 5.0 bar.g 0 to 16.0 bar.g 0 to 60.0 bar.g 0 to 400 bar.g 0 to 600 bar.g
Cable: Insulation: Terminations: Connector:
Confidential
2 x 0.25mm2, 3m 300V (1200Vp) 2 x ferrule ‘C’ = +VDC DIN EN 175301-803-C
3 1 2
3
1
29/08/2007
Technical
Y08CM29.00
16.0bar.g Pressure Sensor; Integral 3m Cable
Sensor:
4-20mA, 0 to 16.0 bar.g specification as Y04CM29.00 2 x 0.25mm2, 3m 300V (1200Vp), PVC 2 x ferrule (+) brown (+VDC) (-) green (signal)
Cable: Insulation: Terminations:
brown 3m
green
brown
green
19A/F
G¼“
Y08CM22.00
3m Cable Assembly
Cable: Insulation: Terminations:
2 x 0.25mm2, 3m 300V (1200Vp), PVC 2 x ferrule C = +VDC DIN EN 175301-803-C
Connector:
3m
3
3 1 2
1
Mounting: Mount vertically upwards. Do not mount downwards, accuracy and seal reliability may be affected by build-up of internal condensation or oil combined with other airborne contaminants. If mounted in a position exposed to environmental conditions, ensure the sensor is protected from direct exposure to rainfall, wind chill factor, and direct sunlight.
Confidential
29/08/2007
