Transcript
Liquid & Slurry
Pipeline Integrity Products
Solid & Powder
Insertion & Retraction Tools
Steam & Water
Sentry HPTEXL Series
Gas
description Sentry® Pipeline Integrity Products insertion & retraction tools are used to place and retrieve corrosion coupons holders, injection & sample quills, or chemical nozzles & atomizers into high-pressure applications without interruption of the system. The tool is used only during insertion or retraction and is removed once that operation has been completed. This allows just one insertion & retraction tool to be used to service multiple installations, saving money.
models HPTEXL-24 HPTEXL
benefits The Sentry HPTEXL Series tool is used to place Sentry MM-30 and MM-50 multipurpose tool holders into a pressurized system. The HPT tool is used only during insertion or retraction and is removed once that operation has been completed. This allows just one insertion & retraction tool to be used to service multiple installations, saving money. The operator is able to work from a stable and secure position to the side of the tool, which can be operated from any position. The tool is non-telescoping, reducing the space needed for operation. Other systems require clearances of up to 2-1/2 times the height of the tool.
HPTEXL-24
features Non-telescoping design Side handle crank for easy insertion and retraction Can be mounted and operated in any position Standard travel lengths of:
HPTEXL - 41 in (104 cm) HPTEXL-24 - 20 in (50 cm) Unique collet retention design allows multiple passes when inserting or retracting
rods and shafts, which permits total travel of up to 20 feet Standard travel lengths of 20 in (50 cm) or 41 in (104 cm) Mechanical retraction for bent or jammed rods/shafts Grease fittings for long service life Fully rebuildable
Manufactured under one or more U. S. patents: 6,357,470 B1; 8,359,937 B2
966 Blue Ribbon Circle North, Oconomowoc, WI 53066 | +1-262-567-7256 |
[email protected] | www.sentry-equip.com
Pipeline Integrity Products > Insertable & Retractable Tool Holders > Sentry HPTEXL Series
Support Handle (Storage Position)
Grease Fitting
"Travel" (See Specifications) Travel Plate
"OA Height" HPTEXL24
25 7/8" [657]
HPTEXL
49 7/8" [1267]
Crank Handle
"OA Height" Collet and Lock Bolt Assembly
Grease Fittings Support Handle (Operating Position)
Swivel Joint Tool Connection
S-PI-SPS-00416-0 7-15
specifications weight
HPTEXL-24: 15.5 lbs (7 kg); HPTEXL: 22 lbs (10 kg)
materials
Lightweight aircraft grade aluminum, brass and SS
pressure rating
Can be used to insert and retract rods and shafts in applications up to MAOP of 7500 psi (517 bar)
temperature rating
Ambient
tool connection
3/4 in NPT
European Authorized Rep: OBELIS Bd. General Wahis 53-1030 Brussels, Belgium
It is solely the responsibility of end users, through their own analysis and testing, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied and properly maintained, and to limit their use to their intended purpose. Improper selection, installation, or use may result in personal injury or property damage.
966 Blue Ribbon Circle North Oconomowoc, WI 53066 U.S. +1-262-567-7256
[email protected] www.sentry-equip.com
