Preview only show first 10 pages with watermark. For full document please download

Ser-rj45 Serial Rs232 Cable

   EMBED

Share

Transcript

SER-RJ45 Serial RS232 Cable Pre-terminated Configuration Cable for Simple Commissioning Specifications Termination Host DB-9 - Female Module RJ45 - Male Length 1.1m (3.6’) General Note: Specifications subject to change. Ordering To order, select product code from the table and specify country of application. Description The SER-RJ45 Serial Cable is a 1.1m (3.6’) DB-9 female to RJ45 male preterminated straight through cable. It is suitable for various ELPRO products and is used for connecting between ELPRO products and peripheral equipment. Product Code Description SER-RJ45 Serial RS232 Cable - DB9 Female to RJ45 Male Straight Through Product Compatibility Please refer to product datasheets for compatibility details to suit your application. The SER-RJ45 cable enables configuration, diagnostics and exchange of serial data to a DTE device. Note: Configure other ELPRO products using SER-DB9 (Data Sheet #7955). The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. ©2013 Cooper Bussmann www.cooperbussmann.com/wireless 0513 BU-SB13099 Page 1 of 1 Datasheet: 7956