Transcript
CX330_Copertina 18-04-2005 14:33 Pagina 1 C
CX
M
Y
CM
MY
CY CMY
K
SERIES HYDRAULIC EXCAVATORS
Colori compositi
CX330
CX330 _INB
18-04-2005
14:30
Pagina 2
ENGINE Latest generation engine, meeting European standards (Tier 2 “low smoke emission” regulations). Make ........................................................................... ISUZU Type ............................................................... AA-6HK1XQB Turbo ............................................................................... Yes Injection ......................................... electronically controlled No. of cylinders................................................................... 6 Bore - Stroke ................................................. 115 x 125 mm Cubic capacity ........................................................ 7790 cm3 EEC 80/1269 horsepower...................... 185.4 kW - 248 hp Engine speed......................................................... 2000 rpm Automatic engine pre-heating provides for optimum and immediate operation as soon as the working temperature is reached, a guarantee of longer life for the engine and the hydraulic components. The injection pump is directly, electronically controlled by a special calculator which takes the hydraulic system load parameters into account. Regulation is quicker and more efficient than on conventional systems, reducing smoke and noise emissions and also significantly reducing fuel consumption.
SWING Axial piston, fixed flow motor Max upperstructure swing speed .......................... 9.6 rpm Hydraulic system gives priority to the swing when operated simultaneously with the dipper. Hydrostatic swing brake backed up by mechanical brake during swing stopping and when machine is being transported. Hydrostatic upperstructure braking during working phases, with an “anti-bounce” valve stopping neatly and accurately over a truck body or trench. Backhoe clamshell circuit operated by means of a manual control on the dipper. Auxiliary circuit Using the auxiliary section available as standard, a maximum number of different tools and assemblies can be used, to suit customer requirements (See options). FILTRATION Exceptionally fine protection of all hydraulic system components by means of the “ULTRA CLEAN” system (a special filter which removes all particles over 1 micron in size, as well as all traces of water condensation ). The use of this system means the hydraulic fluid retains all its qualities for 5000 hours, thus reducing servicing intervals and maintenance costs. The hydraulic system is also equipped with an inlet filter, a return filter and a filter on the pilot circuit.
HYDRAULIC SYSTEM Linked to the engine power management electronic system, a second electronic system manages all the hydraulic parameters so as to obtain the highest possible available hydraulic power, under optimum conditions of efficiency and economy. The system consists of two axial piston, variable flow pumps. Max output ..................................................... 2 x 284 l/min Max safety valve pressure Attachment / Power Boost ......................... 343/373 bar Upperstructure swing ........................................... 294 bar Travel..................................................................... 343 bar CONTROL VALVES 4 sections for: LH travel, boom, bucket, and dipper acceleration 5 sections for: RH travel, swing, dipper, auxiliary circuit and boom acceleration.
CX330 - 02
2
COOLING Servicing of the cooling systems (engine and hydraulics) is considerably simplified due to total accessibility.
CX330 _INB
18-04-2005
14:30
Pagina 3
TRAVEL The travel circuit is equipped with two axial piston, variable flow motors. Planetary reduction gear, automatic multi-disc brake. Max travel speed ...................................................... 5.5 kph Low travel speed ...................................................... 3.2 kph Speed change is controlled from the instrument panel. Gradeability........................................................... 70% (35°)
ELECTRICAL SYSTEM Circuit........................................................................ 24 volts Batteries .................................................. 2 x 12 v - 140 A/h Circuit equipped with water-proof connectors Alternator ........................................................ 24 v - 50 A/h
UNDERCARRIAGE Type “X” design, strongly built undercarriage provides for quick travel over all types of work-site and better stability when working or travelling under load. Perfectly protected motors and piping, a guard underneath the hydraulic swivel, high ground clearance - for easy access to the most difficult work-sites. Spring-type track tensioning, adjustable by an easily accessible grease cylinder.
Suspended cab (6 mounting points with rubber/fluid shock absorbing mountings). Access to the operator’s compartment is facilitated by a wide door and the fact that the LH control arm can be raised completely out of the way. Exceptional cab width (1.00 metre) providing a spacious, airy working space. Air suspension, ergonomic seat, with multiple adjustments as standard equipment. The windscreen can be raised and locked in the upper or lower position. The lower portion of the windscreen can be removed and placed in a storage compartment at the rear LH side of the cab. The windscreen wiper is mounted on the RH cab pillar. The cab floor is flush with the door sill for easy cleaning. Self-regulating air conditioning, ventilation and defrosting of the cab by adjustable outlets (windscreen, operator, rear of cab). Radio pre-equipment with loud-speaker housings. Double sliding window on door. Wide foot-rest on either side of the travel pedals and levers. Optional pedal location (hammer, offset, etc.)
Specifications (per track set): Upper rollers ...................................................................... 2 Lower rollers ...................................................................... 8 Number of track pads ..................................................... 48 Type of shoes................................................ Triple grouser Standard track pad width ...................................... 600 mm Chain guides ..................................... Front and central (2)
COMFORT - OPERATION - SAFETY
CAB Combining comfort, safety and ergonomics, the CX330 cab has been designed to provide the best possible working conditions in a pleasant environment, thus enabling the operator to get the very best out of his machine.
The safety console and the control panel are located to the right of the operator. They include: A large back-lit LCD screen, clearly displaying messages and indicators covering the vital functions of the machine - in a choice of 14 languages. Touch controls for work mode, travel speed, automatic mode and emergency stop are provided. There is also a touch control to select the attachment shock absorbing function: a soft or firm mode can be selected by the operator depending on the work being done. “Clear language text and symbol” messages, plus an audible warning, enable the operator to check that his machine is operating correctly. ENGINE RETURN TO IDLE The engine return to idle can be automatic or manual as required by the operator (control on RH control lever).
CX330 - 02
3
CX330 _INB
18-04-2005
14:30
Pagina 4
working mode to be changed automatically and continuously (without any action on the part of the operator), depending on the type of work being done. Over all the cycles performed, a real reduction in fuel consumption is found compared with continuous use in one single working mode.
ANTI-THEFT PROTECTION An anti-theft system incorporated into the machine’s electronic system is standard equipment.
AUTO POWERBOOST To simplify the operator’s work even further, enabling him to get the maximum performance from his machine, CASE uses a totally automatic powerboost. Regardless of the working mode, AUTO POWERBOOST on the CX330 cuts in whenever the machine encounters a difficult obstacle. For a period of 8 seconds the force at the dipper and bucket is increased by 8 to 10 %, totally automatically.
WORK MODES Hydraulic power is controlled by the electronic system, which provides a continuous link between the hydraulics and the engine. The operator has a choice of 3 “traditional” modes, plus one “automatic” mode: H mode (Heavy) uses all the machine’s available power for tough jobs, providing optimum efficiency, high working speed and maximum force. S mode (Standard) is the “traditional” working mode. It gives 90% of H mode performance (power and speed), and greater fuel economy. L mode (Light) is the mode to be used for finishing work (sloping banks, profiles, etc), where precision is what is required. It’s also the mode used when handling loads and travelling with loads, due to the reduced flow and the continuous availability of Power Boost (maximum pressure applied continuously). For higher efficiency and maximum use of the machine’s resources, certain functions have been simplified for the operator. This is the case for the Automatic Mode. The AUTO mode on the new CX330 considerably simplifies machine operation, since it enables the
ATTACHMENT For quick attachment changing, a hydraulic quick coupler is recommended. MULTI-FIT is the CASE hydraulic quick coupler which has a self-locking mechanical safety system (so the operator doesn’t have to climb down from his cab). This coupler can take buckets made by competing manufacturers, without modification, since it can accept varying centre distances (the clearance is automatically taken up).
CIRCUIT AND COMPONENT CAPACITIES Hydraulic reservoir ...................................................... 175 Hydraulic system.......................................................... 350 Travel reduction gear (per side) ................................... 11 Swing reduction gear....................................................... 6 Engine (including filter change) ................................... 33 Fuel tank....................................................................... 580 Engine cooling system................................................... 42
CX330 - 02
4
L L L L L L L
CX330 _INB
18-04-2005
14:30
Pagina 5
GENERAL DIMENSIONS E
G
CX330
A
B
F M I
K J
H
L
D C
A Overall height
Bal. Bal. Bal. Bal.
2.20 2.60 3.25 4.00
m m m m
B Cab height C Overall length
Bal. 2.20 m Bal. 2.60 m Bal. 3.25 m Bal. 4.00 m D Overall length (wo/attachment) E Width of upperstructure
LC 3.60 m 3.53 m 3.29 m 3.51 m 3.13 m 11.25 m 11.13 m 11.05 m 11.09 m 5.91 m 3.04 m
NLC 3.57 m 3.53 m 3.29 m 3.51 m 3.13 m 11.25 m 11.13 m 11.05 m 11.09 m 5.91 m 3.04 m
F G H I J K L
Upperstructure ground clearance Swing (rear end) radius Track overall length Centre/centre (idler to sprocket) Track gauge Track shoes width (std) Track overall width Shoes 600 mm Shoes 700 mm Shoes 800 mm M Ground clearance
LC 1.21 m 3.45 m 4.98 m 4.04 m 2.60 m 600 mm
NLC 1.21 m 3.45 m 4.98 m 4.04 m 2.39 m 600 mm
3.20 m 3.30 m 3.40 m 0.48 m
2.99 m 3.09 m 3.19 m 0.48 m
WEIGHT AND GROUND PRESSURE With 6.45 m monobloc boom - 3.25 m dipper bucket - operator and full fuel tank
Weight (kg) LC 34 000
Shoes 600 mm steel
Ground pressure (bar) LC NLC 0.64 0.63
NLC 33 800
BUCKETS General purpose SAE capacity Width Weight
Litres mm kg
740 750 770
940 900 820
1150 1050 910
1360 1200 1000
1580 1350 1150
1800 1500 1230
2010 1650 1330
Heavy duty SAE capacity Width Weight
Litres mm kg
740 750 864
940 900 938
1150 1050 1096
1360 1200 1243
1550 1350 1350
1800 1500 1429
2010 1650 1537
Extra heavy duty SAE capacity Width
Litres mm
1360 1200
Litres mm kg
2010 1650 1660
Ditchcleaning with blade SAE capacity Litres Width mm Weight kg
1380 2400 1020
Ditchcleaning with teeth SAE capacity Litres Width mm Weight kg
1380 2400 1020
Quarry SAE capacity Width Weight
1440 2500 1140
1440 2500 1140
Other types of bucket on application.
CX330 - 02
5
CX330 _INB
18-04-2005
14:30
Pagina 6
PERFORMANCE DATA With 6.45 m monobloc boom
11m
40'
35'
30'
25'
20'
15'
10'
5'
0 35'
10m 9m
30'
8m
25' 7m 6m 5m
20'
F
G
15'
4m
E
3m 2m
CX330
1m 0 1m
B D H
2m
A
3m 4m
5'
10'
C 15'
5m
20'
6m
2,44 m 7m
25' 8m 12m 11m
10m
9m
8m
7m
6m
5m
4m
Dipper :
3m
2m
1m
0
2.20 m
2.60 m
3.20 m
4.00 m
10.20 m
10.67 m
11.17 m
11.90 m
B Maximum digging reach at ground levell
9.99 m
10.47 m
10.98 m
11.72 m
C Maximum digging depth
6.30 m
6.73 m
7.34 m
8.14 m
A Maximum digging reach
D Digging depth - 2.44 m (8') level bottom
-
6.55 m
7.19 m
8.01 m
E Maxi dump height
6.77 m
7.14 m
7.23 m
7.54 m
F Overall reach height
9.85 m
10.32 m
10.37 m
10.67 m
-
4.63 m
4.50 m
4.56 m
G Minimum swing radius
-
5.97 m
6.35 m
7.15 m
Digging force
H Vertical straight wall dig depth
24600 daN
21100 daN
17800 daN
15260 daN
Breakout force
24840 daN
24840 daN
24840 daN
24840 daN
CX330 - 02
6
CX330 _INB
18-04-2005
14:30
Pagina 7
LIFTING CAPACITY CX330 LC with 6.45 m monobloc boom With 2.20 m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
18750* 20050*
4.5 m front 360°
13600* 16650* 18450* 18500* 17550* 15600* 12050*
13300 11850 10950 10650 10700 10950 11400
6m front 360° 9450* 10600* 12000* 12400 12050 11950 12000*
9000 8450 7800 7250 6950 6850 7000
7.5 m front 360° 8650* 9100* 9050 8750 8500 8450
9m front 360°
max front 360° 8850* 8450 8650* 5850 7950 4900 7250 4400 7050 4200 7200 4300 7950 4700 9650 5650 9800* 8300
Max reach m 6.3 7.7 8.3 8.6 8.6 8.4 7.8 7.0 5.5
9m front 360°
max front 360° 8100* 7400 6650* 5050 6750* 4350 6550 3950 6350 3750 6500 3800 7000 4150 8250 4850 9100* 6600
Max reach m 6.9 8.3 8.9 9.1 9.2 9.0 8.5 7.6 6.4
max front 360° 6000* 4500* 4600* 3900 4850* 3550 5350* 3400 5900 3450 6300 3650 7250 4250 8950* 5450 8600*
Max reach m 7.6 8.8 9.4 9.6 9.7 9.4 9.0 8.2 7.1 5.2
max front 360° 4400* 3350* 3400* 3250 3600* 3000 3900* 2850 4350* 2850 5150* 3000 5950 3350 7300 4150 8150* 6050
Max reach m 8.6 9.6 10.1 10.4 10.4 10.2 9.8 9.1 8.1 6.5
6050 5850 5500 5200 5050 5000
With 2.60 m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
15950* 22050* 17350*
4.5 m front 360°
15750* 18000* 18600* 18000* 16350* 13300*
12200 11150 10700 10650 10800 11200
6m front 360°
10000* 11500* 12450 12050 11900 11950* 9950*
8550 7900 7300 6950 6800 6850 7150
7.5 m front 360° 8150* 8650* 9100 8750 8500 8400 8450
6150 5850 5550 5200 5000 4900 5000
6700 6550
4050 3900
With 3.25 m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
4.5 m front 360°
13700* 7150* 10550* 15450* 21450* 20350*
14400* 12700 17150* 11500 18450* 10850 18400* 10650 17300* 10700 14850* 10950 10250*
6m front 360°
9150* 10750* 12250* 12150 11900 11850 11150*
8750 8050 7450 7000 6800 6750 6950
7.5 m front 360° 6350* 7400* 6250 8050* 5950 8900* 5600 8800 5250 8500 5000 8300 4850 8300 4850
9m front 360°
6550* 6700 6500 6350
4250 4050 3850 3750
With 4.00 m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
12100* 11400* 14250* 18550* 23050* 21850 17750*
4.5 m front 360°
6m front 360°
12300* 9450* 8200 15500* 11750 11150* 7500 17500* 10800 12100 6950 18200* 10350 11700 6600 17700* 10250 11550* 6450 16050* 10400 11650 6550 12750* 10850 9300* 6850
7.5 m front 360°
7050* 8000* 8750 8400 8150 8050 8100
6000 5600 5200 4850 4650 4550 4650
9m front 360° 5350* 6600* 6700 6450 6200 6100 6050
4400 4250 4000 3800 3600 3450 3450
- Machine in «LIGHT» mode - Lift capacities are taken in accordance with SAE J 1097 / ISO 10567 / DIN 15019-2. - Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity. - Capacities that are marked with an asterisk are hydraulic limited. - If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the tables to calculate the real lifting capacity.
CX330 - 02
7
CX330 _INB
18-04-2005
14:30
Pagina 8
LIFTING CAPACITY CX330 NLC with 6.45 m monobloc boom With 2.20 m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
4.5 m front 360°
13600* 16650* 18450* 18500* 18750* 17550* 20050* 20000 15600* 12050*
12100 10650 9800 9500 9550 9750 10250
6m front 360° 9450* 10600* 12000* 12350 12000 11900 12000*
7.5 m front 360°
8250 8650* 7700 9100* 7050 9000 6550 8700 6250 8500 6150 8450 6300*
9m front 360°
max front 360° 8850* 7750 8650* 5300 7900 4450 7250 4000 7000 3800 7200 3850 7900 4200 9600 5100 9800* 7500
Max reach m 6.3 7.7 8.3 8.6 8.6 8.4 7.9 7.0 5.5
9m front 360°
max front 360° 8100* 6800 6650* 4600 6750* 3900 6500 3550 6300 3400 6450 3450 6700 3700 8250 4350 9100* 5950
Max reach m 6.9 8.3 8.9 9.1 9.2 9.0 8.5 7.6 6.4
max front 360° 6000* 5650 4500* 4100 4600* 3550 4850* 3200 5350* 3050 5850 3050 6300 3300 7200 3800 8950* 4900 8600* 8200
Max reach m 7.6 8.8 9.4 9.6 9.7 9.4 9.0 8.2 7.1 5.2
max front 360° 4400* 3350* 3400* 2950 3600* 2650 3900* 2500 4350* 2500 5150* 2650 5950 3000 7250 3700 8150* 5400
Max reach m 8.6 9.6 10.1 10.4 10.4 10.2 9.8 9.1 8.1 6.5
5550 5300 5000 4700 4550 4500
With 2.60 m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
4.5 m front 360°
6m front 360°
10000* 15750* 10950 11500* 18000* 9950 12450 18600* 9550 12000 16000* 18000* 9500 11850 22050* 19700 16350* 9650 11950 17350* 13300* 10000 9950*
7.5 m front 360°
8150* 7800 8650* 7150 9050 6600 8700 6250 8450 6100 8350 6150* 8450 6450
5600 5350 5000 4700 4500 4400 4500
6650 6500
3650 3500
With 3.25m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
4.5 m front 360°
13700* 7150* 10550* 15450* 21450* 19450 20350* 20000
14400* 11500 17150* 10300 18450* 9700 18400* 9500 17300* 9550 14850* 9800 10250*
6m front 360°
9150* 10750* 12250* 12100 11850 11800 11150*
7800 7350 6750 6300 6100 6050 6250
7.5 front 6350* 7400* 8050* 8900* 8750 8450 8300 8300
m 360° 5850 5700 5450 5100 4750 4500 4350 4350
9m front 360°
6550* 6700 6500 6350
3850 3650 3500 3350
With 4.00 m dipper, 600 mm shoes and bucket Reach Height 7.5 m 6m 4.5 m 3m 1.5 m 0 -1.5 m -3 m -4.5 m -6 m
3m front 360°
12100* 11400* 14250* 18550* 23050* 19000 17750*
4.5 m front 360°
12300* 15500* 17500* 18200* 17700* 16050* 12750*
6m front 360°
11950 9500* 7500 10550 11150* 6750 9600 12050 6200 9200 11650 5900 9100 11500 5750 9250 11600 5850 9650 9300* 6150
7.5 m front 360°
7050* 8000* 8750 8350 8100 8000 8100
5500 5100 4700 4350 4150 4050 4150
9m front 360° 5350* 6600* 6650 6400 6200 6050 6050
4000 3850 3600 3400 3200 3050 3050
- Machine in «LIGHT» mode - Lift capacities are taken in accordance with SAE J 1097 / ISO 10567 / DIN 15019-2. - Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity. - Capacities that are marked with an asterisk are hydraulic limited. - If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the tables to calculate the real lifting capacity.
CX330 - 02
8
CX330 _INB
18-04-2005
14:30
Pagina 9
GENERAL DIMENSIONS - LONG REACH With 12 m monobloc boom and 9.30 m dipper
E
G
CX330
A
B
F M I
K J
H
L
D C
A Overall height
3.50 m
H Track overall length
4.98 m
B Cab height
3.13 m
I Centre/centre (idler to sprocket)
4.04 m
C Overall length
16.77 m
J Track gauge
2.60 m
D Overall length (wo/attachment)
6.03 m
K Track shoes width (std)
800 mm
E Width of upperstructure
3.04 m
L Track overall width
F Upperstructure ground clearance
1.21 m
M Ground clearance
G Swing (rear end) radius
3.57 m
Shoes 800 mm
3.40 m 0.48 m
WEIGHT AND GROUND PRESSURE With 12 m monobloc boom - 9.30 m dipper bucket - operator and full fuel tank
Weight (kg)
Ground pressure (bar)
Shoes 800 mm
39400
0.58
BUCKETS for 12 m monobloc boom and 9.30 m dipper General purpose SAE capacity Width PWeight
Litres
190
260
330
450
560
mm
350
450
600
750
900
Kg
265
300
325
375
420
CX330 - 02
9
CX330 _INB
18-04-2005
14:30
Pagina 10
PERFORMANCE DATA - LONG REACH With 12 m monobloc boom and 9.30 m dipper 16m 75'
70'
65'
60'
55'
50'
45'
40'
35'
30'
25'
20'
15'
10'
5'
0
15m
50'
14m
45'
13m
40'
12m 11m
35'
10m 9m 8m 7m
30'
G
25'
F E
6m
20'
5m
15'
4m 3m 2m
CX330
1m 0 1m
5'
2m 3m
5m 6m 7m
10'
B A
4m
C
D
15' 20'
H
25'
8m
30'
9m 10m
35'
11m
40'
12m 13m
45'
14m 15m
50' 2,44 m
16m
55'
17m 22m
20m
18m
16m
14m
12m
10m
8m
6m
4m
2m
0
Dipper : A Maximum digging reach B Maximum digging reach at ground level C Maximum digging depth D Digging depth - 2.44 m (8') level bottom E Maxi dump height F Overall reach height G Minimum swing radius H Vertical straight wall dig depth Digging force Breakout force
CX330 - 02
10
9.30 m 21.05 m 20.95 m 16.75 m 16.65 m 13.05 m 15.20 m 7.40 m 14.10 m 4 390 daN 6 410 daN
7690* 4783* 3813* 3478* 3425* 3519* 3702* 3944* 4230* 4551* 4905* 5290* 5706* 6153* 6632* 6538* 5514* 4275*
5541* 5981* 6358* 6660* 6287 6886* 5934 6580* 5679 6406* 5504 6430* 5394 6588* 5337 6851* 5324 6850* 5350 6630* 5411 6341* 5506 5975* 5634 5519* 4954* 4254* 3378*
7m front 360°
4092* 4358* 4600* 4812* 4549 4988* 4285 5124* 4075 5221* 3914 5275* 3799 5288* 3723 5256* 3682 5178* 3674 5049* 3696 4864* 3748 4615* 3828 4289* 3939 3868* 3325* 2611*
9m front 360°
3071* 3248* 3420* 3582* 3729* 3427 3857* 3237 3963* 3078 4044* 2949 4097* 2850 4120* 2779 4111* 2735 4064* 2718 3977* 2725 3841* 2758 3648* 2817 3385* 2904 3028* 3026 2543*
11 m front 360°
2353* 2466* 2583* 2701* 2817* 2928* 2783 3031* 2630 3122* 2495 3200* 2378 3260* 2280 3302* 2203 3320* 2147 3312* 2111 3274* 2095 3199* 2102 3080* 2130 2905* 2184 2654* 2267
13 m front 360°
1948* 2013* 2085* 2161* 2241* 2321* 2401* 2255 2478* 2140 2549* 2034 2613* 1938 2666* 1854 2707* 1784 2732* 1728 2739* 1688 2722* 1665 2676* 1660 2594* 1674 2464* 1710
15 m front 360°
17 m front 360° 1185* 1496* 1735* 1763* 1798* 1839* 1886* 1937* 1991* 1889 2045* 1805 2099* 1722 2150* 1644 2198* 1571 2239* 1505 2271* 1448 2293* 1402 2299* 1367 2286* 1345 2249* 1339* 877* 1114* 1311* 1477* 1462 1611* 1408 1713* 1354 1777* 1301 1793* 1250 1747* 1204 1622* 1164 1395* 1131
19 m front 360°
Max Max reach front 360° m 805* 17.53 802* 18 805* 18.42 813* 18.76 827* 19.05 846* 19.29 871* 19.46 903* 19.59 940* 19.66 985* 19.69 1039* 19.66 1101* 19.58 1175* 1133 19.45 1262* 1125 19.26 1365* 1128 19.02 1488* 1143 18.72 1636* 1172 18.37 1817* 1216 17.95 2042* 1278 17.46 2202* 1363 16.90 2257* 1476 16.26 2312* 1626 15.52 2364* 1827 14.69 2409* 2101 13.72 2438* 12.61 2434* 11.29 2355* 9.69
14:30
3152* 1448* 1241* 1379* 1611* 1878* 2162* 2457* 2762* 3077* 3402* 3736* 4082* 4438* 4803* 5174* 5544*
3m 5m front 360° front 360°
18-04-2005
- Machine in «LIGHT» mode - Lift capacities are taken in accordance with SAE J 1097 / ISO 10567 / DIN 15019-2. - Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity. - Capacities that are marked with an asterisk are hydraulic limited - If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the tables to calculate the real lifting capacity.
Reach Height 11 m 10 m 9m 8m 7m 6m 5m 4m 3m 2m 1m 0m -1 m -2 m -3 m -4 m -5 m -6 m -7 m -8 m -9 m -10 m -11 m -12 m -13 m -14 m -15 m
CX330 Long Reach with 12.00 m boom - 9.30 m dipper, 800 mm shoes and bucket
CX330 _INB Pagina 11
LIFTING CAPACITY - LONG REACH With 12.00 m monobloc boom and 9.30 m dipper
CX330 - 02
11
CX330 _INB
18-04-2005
14:30
Pagina 12
STANDARD EQUIPMENT Hydraulic control • 4 working modes (3 manual + 1 auto) • 2 travel speeds with automatic speed change • Swing brake control • Load-holding valves on boom and dipper • Power control automatic powerboost • Hydraulic control lever locking, lever position adjustment • Auxiliary circuit control valve section • High performance “Ultra Clean” filtration system (1 µ) Engine control • Engines to Tier 2 standard • Calculator on injection pump • Automatic / manual engine return to idle • Fuel level check • Emergency stop • Automatic engine pre-heating System Monitor, with 14 language display • Messages (Function, safety, etc.) • Working modes (H-S-L and auto) • Operating modes (travel mode, swing locking, etc.) • Audible warning device • Digital clock • Water temperature • Hydraulic oil temperature • Diagnostic system
OPTIONS Electrical system • Leak-proof connectors • Double horn Lighting • 1 working light on the fuel tank • 1 working light on the boom • 1 working light on the cab Operator environment • Modern cab, 1 metre wide • Safety glass • Suspended cab (6 mounting points with rubber/fluid shock absorbing mountings) • Windscreen with lockable opening • “LCD” display • Water and dust-proof membrane type touch controls • Windscreen washer and wiper • Adjustable heater • Floor mat • Sun-visor • Rear-view mirror and safety mirrors • Self-adjusting air conditioning • Anti-theft device Operator seat • Air suspension • Height and tilt adjustment • Adjustable head-rest • Adjustable seat-back angle • Adjustable arm-rests • Reel-type safety belt
• Auxiliary hydraulic circuit Possible options and combinations: - Hammer circuit with pedal control - 2nd auxiliary circuit for clamshell rotation, etc. - Dual-acting circuit (shears type) - Multi-purpose circuit (hammer or shears) - Multi-purpose circuit + 2nd circuit • MULTI-FIT quick coupler
Standard and optional equipment can vary from country to country
WORLDWIDE CASE CONSTRUCTION EQUIPMENT CONTACT INFORMATION EUROPE/AFRICA/MIDDLE EAST: CENTRE D’AFFAIRES EGB 5, AVENUE GEORGES BATAILLE - BP 40401 60671 LE PLESSIS-BELLEVILLE - FRANCE NORTH AMERICA/MEXICO: 700 STATE STREET RACINE, WI 53404 U.S.A. LATIN AMERICA: AV. GENERAL DAVID SARNOFF 2237 32210 - 900 CONTAGEM - MG BELO HORIZONTE BRAZIL
NOTE: Standard and optional fittings can vary according to the demands and specific regulations of each country. The illustrations may include optional rather than standard fittings consult your Case dealer. Furthermore, CNH reserves the right to modify machine specifications without incurring any obligation relating to such changes.
Conforms to directive 98/37/CE
CASE CONSTRUCTION EQUIPMENT CNH France, S.A. Centre d’Affaires EGB 5, avenue Georges Bataille BP 40401 60671 Le Plessis-Belleville Cedex - FRANCE Tel. 33 (0)3 44742100 Fax 33 (0)3 44742335
www.casece.com
CASE IS A BRAND OF CNH. CNH: THE TOTAL SOLUTIONS CHOICE FOR YOUR SPECIFIC BUSINESS NEEDS.
Form No. 26051049GB - Printed in Italy - LEADER Firenze - 04/05
ASIA PACIFIC: UNIT 1 - 1 FOUNDATION PLACE - PROSPECT NEW SOUTH WALES - 2148 AUSTRALIA CHINA: No. 29, INDUSTRIAL PREMISES, No. 376. DE BAO ROAD, WAIGAOQIAO FTZ, PUDONG, SHANGHAI, 200131, P.R.C.
