Series Pvt412apbf Hexfet Power Mosfet Photovoltaic Relay General Description

Transcript

Data Sheet No. PD10060 revK Series PVT412APbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay ® Single Pole, Normally Open, 0-400V, 240mA AC / 360mA DC General Description The PVT412A Series Photovoltaic Relay is a sin­glepole, normally open solid-state re­lay that can replace electromechani­cal re­lays in many applications. It util­ izes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an inte­grated circuit photovoltaic gen­erator of novel construction. The output switch is con­trolled by radiation from a GaAlAs light emit­ting diode (LED) which is optically isolated from the photovol­taic generator. These SSRs are specifically designed for industrial control and peripheral tele­com applications. Series PVT412A Relays are packaged in a 6-lead molded DIP package with either thru-hole or surface mount (‘gull-wing’) termi­nals. It is avail­able in standard plastic ship­ping tubes or on tape-and-reel. Please refer to part identifica­tion in­formation . Features  HEXFET Power MOSFET output  Bounce-free operation  4,000 VRMS I/O isolation  Very low on-resistance (RDD-ON)  Linear AC/DC operation  Solid-State Reliability  UL Recognized  ESD Tolerance: 4000V Human Body Model 500V Machine Model Applications  Control of AC power line (up to 240 VAC) industrial loads  Control of DC industrial loads up to +/-300 VDC  On/Off hook switch  Dial-pulse generation Part Identification PVT412APbF PVT412ASPbF PVT412AS-TPbF thru-hole surface-mount surface-mount, Tape and Reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) www.irf.com 1 Series PVT412APbF Electrical Specifications 0-400V, 240ma,AC (TA = +25°C) unless otherwise specified) INPUT CHARACTERISTICS Limits 3.0 to 25 6.0 mA V Limits Units Minimum Control Current (see figure 1) Maximum Control Current for Off-State Resistance Control Current Range (Caution: current limit input LED, see figure 5) Maximum Reverse Voltage a OUTPUT CHARACTERISTICS 3.0 0.4 Operating Voltage Range Maximum Load Current @ TA=+40°C 5mA Control (see figure 1) A Connection B Connection C Connection Maximum On-State Resistance @TA=+25°C 100mA Pulsed Load, 5mA Control (see figures 2 & 3) A Connection B Connection C Connection Max. pulsed Load Current @TA=+25°C, ±400V, 5mA Control (10mS @ 10% duty cycle) Maximum Off-State Leakage @TA=+25°C, ±400V Maximum Turn-On Time @TA=+25°C (see figures 6 & 7) For 50mA, 100 VDC load, 5mA Control (5mS pulse width @ 50% duty cycle) Maximum Turn-Off Time @TA=+25°C (see figures 6 & 7) For 50mA, 100 VDC load, 5mA Control (5mS pulse width @ 50% duty cycle) Maximum Output Capacitance @ 50VDC, f=1MHz (Cout, see figure 8) 0 to ±400 GENERAL CHARACTERISTICS Limits Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output Maximum Capacitance, Input-Output Vd=0V, f=1MHz Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage Units mA mA V peak 240 260 360 mA mA mA 6 3 2 750 1.0 Ω Ω Ω mA µA 3.0 ms 0.5 40.0 ms pF 4000 1012 1.0 +260 -40 to +85 -40 to +100 Units VRMS Ω pF °C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. Connection Diagrams www.irf.com 2 Series PVT412APbF 300 800 600 400 200 L oad C urrent (mA ) Max. Load Current (mA) 250 “A” Connection “A” Connection ILED = 5mA ILED = 3mA 150 100 200 -3.0 -2.0 -1.0 0 0.0 -400 -600 50 1.0 2.0 3.0 -200 I L E D = 5mA 20mS P u ls ed, 25C -800 0 Vo lta ge D r op (V DD ) 0 20 40 60 80 Ambient Temperature (C) 100 Figure 1. Current Derating Curves 800 I 700 LED Figure 2. Typical On Characteristics = 5mA “A” Connection 600 L oad C urrent (mA ) 20 m S - P u l s e d , 25 ºC 500 400 25-40º C 60ºC 85ºC 300 200 100 0 0. 0 0.5 1.0 1. 5 2. 0 2.5 3.0 3. 5 VDD (Volts) Ambient Ambient Temperature (oC) Figure 3. Typical On-Characteristics Figure 4. Typical Normalized Off-State Leakage www.irf.com 3 Series PVT412APbF 10.00 “A” “A” Connection Connection Tdly Ton 0 0.5 Delay T ime (mS ) it & -45°C lim max. device TYPICAL min. devic e & +85°C limit Input Current (mA) 1.00 1.0 Toff Toff 0.10 1.5 0.01 2.0 1 2 3 4 5 6 7 8 9 10 40 45 50 I LE D ( mA) LED Forward Voltage Drop (Volts DC) Figure 6. Typical Delay Times Figure 5. Input Characteristics (Current Controlled) 400 “A” Connection 350 T ypic al C apac itanc e (pF ) 300 ILED 90% I D 10% tdly ton toff Figure 7. Delay Time Definitions www.irf.com 250 200 150 100 50 0 0 5 10 15 20 25 30 35 VDD Drain to DrainCapacitance Voltage Figure 8. Typical Output 4 Series PVT412APbF Case Outlines 01-2008 01 01-2009 01 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 Data and specifications subject to change without notice. 2/2008 5