Preview only show first 10 pages with watermark. For full document please download

Server Pro - Pro Systems Group

   EMBED

Share

Transcript

UK SERVER PRO professional patch panel PSG’s Server PRO patch panel is a professional 19" rack mount device, designed to connect all necessary devices and connectors in a server environment, within a rack mount environment. All Dual-link DVI graphic outputs are user configurable with an EDID management based on DVI Parrot and the EDID emulator by Carallon. This patch panel features an internal active USB hub, powering all USB outputs to maximum level according to USB standards. The internal USB connector provides a safe place for copy protection dongles (e.g. for the Catalyst Media Server software) and thus effectively works as a theft protection for the precious dongle. The Server PRO patch panel also provides two USB connectors on the back panel, to power up two PSG Graphic Extender (PSG X4 or PSG THTG). PowerCon connectors on the back panel allow for internal power-supply of the server computer as well as other PSG 19" devices without the necessity of any cabling on the front panel. FEATURES | Neutrik PowerCon input connector on the back panel | USB cabling connecting to server computer | Neutrik PowerCon output connectors (3 front panel, 2 back panel) | 2 Neutrik etherCon connectors on front panel and Cat6 cabling connecting to server computer | Active USB hub providing maximum power output on USB ports | Neutrik USB connectors (2 front panel, 2 back panel) | internal USB connectors for dongles (the™ protection) TECHNICAL FACTS | Dual-link DVI-I compatible for both high bandwith digital and analog functionality | Accessible Mode buttons and RGB Status LED’s | Compatible with VESA EDID 1.3 and EDID Extensions EIA/CEA-861 (HDTV support etc.) | 2 or 3 DVI connectors on front panel | Various connections to server computer (e.g. DVI-I-Dual-Link, HMDI, Dual-Link MiniDisplay Port) | Auto-ranging power input: 100VAC to 240VAC | Mains input current at full load: 115VAC/230VAC – 16A Neutrik PowerCon | Mains input frequency: 50Hz to 60Hz | Power consumption: 69VA | Operating temperature range: -20°C to +50°C | Industrial steel chassis designed for road purposes | 1 rack unit: 19" wide/1.75" high/7.8" deep (483mm x 45mm x 200mm) The Server PRO patch panel is intended for both rental/road and installation purposes. With its family of 19" products and appropriate accessories Pro Systems Group provides professional solutions for the entertainment industry. Pro Systems Group also engineers tailor-made solutions for turnkey application. Pro Systems Group also engineers tailor-made solutions for turnkey application. Pro Systems Group GmbH | Am Vorderfloess 4–6 | D-33175 Bad Lippspringe | Germany | pro-systems-group.com | [email protected]