Preview only show first 10 pages with watermark. For full document please download

Service Bullitin Put Out For This Kit.

   EMBED

Share

Transcript

April, 1997 CLOSE WINDOW SERVICE BULLETIN NO. 5 1992 - Ford 350 4x4 Vehicles Frame Attachment KIT NO. 81004 Some Ford F-350 vehicles with single rear wheels are being produced that have “stacking pins” protruding from the bottom flange of the frame rails back behind the radiator web mounting brackets. These “stacking pins” can prevent the Part Number 815000 103 (driver’s - side) and Part Number 815000 104 (passenger’s - side) push arms from fitting properly. To install push arms onto vehicles that have “stacking pins” in the frame, either cut the pins off flush with the bottom of the frame rails or drill clearance holes in the horizontal frame plates of the push arms for the pins to pass through. PIN Diamond Equipment assumes no responsibility for installations not made according to these instructions Diamond Equipment reserves the right, under its continuing product improvement program, to change construction or design details, specifications and prices without notice or without incurring any obligation. © 1996 Printed in the U.S.A. Old Route 1 RR2, Box 125 • Damariscotta, Maine 04543 Phone 563-2226 (Area Code 207)