Transcript
SERVICE MANUAL MODEL
KV-14FV1B KV-14FV1D KV-14FV1E KV-14FV1U
COMMANDER
DEST. CHASSIS NO.
RM-C816
FR
SCC-xxxx-A
RM-C814
AEP
SCC-xxxx-A
RM-C814
ESP
SCC-Q62B-A
RM-C815
UK
SCC-xxxx-A
BC-5 CHASSIS
MODEL
KV-21FV1B KV-21FV1D KV-21FV1E KV-21FV1U
14
DEST. CHASSIS NO.
RM-C816
FR
SCC-xxxx-A
RM-C814
AEP
SCC-xxxx-A
RM-C814
ESP
SCC-Q62A-A
RM-C815
UK
SCC-xxxx-A
FD TRINITRON COLOUR VIDEO TV ®
∗ Please file according to model size. ....
COMMANDER
SPECIFICATIONS
TV Section
General
TV system: I
Rear Terminals :1/ 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output.
Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In)
Front Terminals … 2 video input – phono jack 2 audio input – phono jack headphones jack
Channel Coverage: UHF: B-21, B69 Picture Tube: • KV-14FV1U: Flat Display Trinitron. 14” (approx. 37 cm. measured diagonally) • KV-21FV1U: Flat Display Trinitron. 21” (approx. 55 cm. measured diagonally)
Clock Quartz locked Clock back up Approx. 7 days Power requirements 220-240 V AC, 50Hz Sound Output: 1 x 6W (music power) 1 x 3W (RMS Mono)
VCR Section Format: VHS Standard Video recording system: Rotary 2-head helical scanning system
Power Consumption: • KV-14FV1U: 86 W • KV-21FV1U: 107 W
Audio recording system: Monaural
Standby Power Consumption: <2W
Video signal: This Video TV is designated to receive TV programmes based on PAL (I) colour system and to record and play on PAL system. The Video TV can also play tapes on NTSC colour system.
Dimensions: • KV-14FV1U: Approx. 375 x 398 x 407 mm. • KV-21FV1U: Approx. 489 x 500 x 477 mm. Weight: • KV-14FV1U: Approx. 15.6 Kg. • KV-21FV1U: Approx. 27.2 Kg.
Tape speed: PAL: SP: 23.39 mm/sec. LP: 11.70 mm/sec.
Accessories supplied: 1 Remote Control (RM-C815) 2 Batteries (IEC designated)
NTSC (playback only): SP: 33.35 mm/sec. LP: 11.12 mm/sec.
Other features: Teletext, Fastext, TOPtext Sleep Timer Wake UP Timer Parental Lock Auto Head Cleaner Dial Timer VideoPlus+
Maximum recording time: SP: 4 hours with E-240 tape LP: 8 hours with E-240 tape
Design and specifications are subject to change without notice.
–2–
TABLE OF CONTENTS Section
Title
Page
SELF DIAGNOSIS FUNCTION ...................................... [ TV SECTION] 1. GENERAL .........................................................
4
Section
Rear Cover Removal ............................................... Chassis Assy Removal ............................................ Service Position (A Board) ..................................... A Board Removal .................................................... Harnes Location ...................................................... Picture Tube Removal .............................................
4-1. 4-2. 4-3. 4-4.
7
16 16 16 16 17 18
Page
4. CIRCUIT ADJUSTMENTS
2. DISASSEMBLY 2-1. 2-2. 2-3. 2-4. 2-5. 2-6.
Title
Adjustments with Commander ................................ Adjustment Method ................................................. Service Data ............................................................ A Board Adjustment ................................................
23 24 25 26
5. DIAGRAMS 5-1. 5-2. 5-3. • •
Block Diagrams ....................................................... Circuit Boards Location .......................................... Printed Wiring Boards and Schematic Diagrams .... A Board .................................................................... CVM Board ..............................................................
27 33 33 34 41
3. SET-UP ADJUSTMENTS 3-1. 3-2. 3-3. 3-4. 3-5. 3-6.
Beam Landing ......................................................... Convergence ............................................................ Focus Adjustment .................................................... Screen (G2) Adjustment .......................................... White Barance Adjustment ..................................... Picture Distortion Adjustment .................................
19 20 21 21 22 22
6. EXPLODED VIEWS 6-1. 6-2.
Picture Tube ............................................................ 77 Chassis ..................................................................... 78
7. ELECTRICAL PARTS LIST ...................................... 82 [ VIDEO SECTION] 1. GENERAL ....................................................................... 2. DISASSEMBLY ............................................................. 3. CIRCUIT ADJUSTMENTS ........................................ 4. INTERFACE, IC PIN FUNCTION DESCRIPTION .............................................................. 5. DIAGRAMS ..................................................................... 6. EXPLODED VIEWS ..................................................... 7. ELECTRICAL PARTS LIST ......................................
46 47 48 51 55 79 90
CAUTION
ATTENTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE ANODE.
APRES AVIOR DECONNECTE LE CAP DE L'ANODE, COURTCIRCUITER L'ANODE DU TUBE CATHODIQUE ET CELUI DE L'ANODE DU CAP AU CHASSIS METALLIQUE DE L'APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LE TUBE CATHODIQUE OU AU BLINDAGE DU TUBE CATHODIQUE.
SAFETY-RELATED COMPONENT WARNING!!
ATTENTION AUX COMPOSANTS RELATIFS À LA SÉCURITÉ!!
COMPONENTS IDENTIFIED BY SHADING AND MARK ! ON THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. CIRCUIT ADJUSTMENTS THAT ARE CRITICAL FOR SAFE OPERATION ARE IDENTIFIED IN THIS MANUAL. FOLLOW THESE PROCEDURES WHENEVER CRITICAL COMPONENTS ARE REPLACED OR IMPROPER OPERATION IS SUSPECTED.
LES COMPOSANTS IDENTIFIÉS PAR UNE TRAME ET PAR UNE MARQUE ! SUR LES SCHÈMAS DE PRINCIPE, LES VUES EXPLOSÈES ET LES LISTES DE PIECES SONT D'UNE IMPORTANCE CIRTIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT. NE LES REMPLACER QUE PAR DES COMPOSANTS SONY DONT LE NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT MANUEL OU DANS DES SUPPLÈMENTS PUBLIÈS PAR SONY. LES RÉGLAGES DE CIRCUIT DONT L’IMPORTANCE EST CRITIQUE POUR LA SÉCURITÉ DU FONCTIONNEMENT SONT IDENTIFIÉS DANS LE PRÉSENT MANUEL. SUIVRE CES PROCÉDURES LORS DE CHAQUE REMPLACEMENT DE COMPOSANTS CRITIQUES, OU LORSQU’UN MAUVAIS FONCTIONNEMENT EST SUSPECTÉ.
–3–
SELF DIAGNOSTIC FUNCTION
1.
OUTLINE
• The units in this manual contain a self-diagnostic function. • If an error occurs, the STANDBY lamp will automatically begin to flash. The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY lamp flash indicators is listed in the instruction manual for the user’s knowledge and reference. • If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.
2.
DIAGNOSTIC TEST INDICATORS
• When an errors occurs, the STANDBY lamp will flash a set number of times to indicate the possible cause of the problem. If there is more than one error, the lamp will identify the first of the problem areas. • Result for all of the following diagnostic items are displayed on screen. No error has occured if the screen displays a “0”. Diagnostic Item Description
No. of times STANDBY lamp flashes
Self-diagnostic display/Diagnostic result
Probable Cause Location
• Power does not turn on
Does not light
—
• +B overcurrent (OCP) or overvoltage (OVP)
2 times
2 : 0 or 2:1 at the same 4:1 time (Note 1)
• FBT • Q802 (H OUT) shorted
• Vertical deflection stopped
4 times
4:0 or 4:1
• IC501 • IC301 !¢ pin • IC606 • Q802 (H OUT) shorted • Q803 • Q608 • R803 open
• Has entered standby state after horizontal raster. • Vertical deflection pulse is stopped. • Horizontal deflection stopped. • Power line is shorted or power supply is stopped.
• White balance failure (no PICTURE)
5 times
5:0 or 5:1
• CRT • IC301 • Q701 - Q717 (CVM board) • G2 is improperly adjusted. (Note 2)
• No raster is generated. • CRT cathode current detection reference pulse output is small.
• Power cord is not plugged in. • Fuse is burned out F1701
Detected Symptoms • Power does not come on. • No power is supplied to the TV. • AC power supply is faulty. • On standby state. • Load on power line is shorted (at the same time 4 : 1 on display).
Note 1: If a + B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously. The symptom that is diagnosed first by the microcontroller is displayed on the screen. Note 2: Refer to screen (G2) Adjustment in section 3-4 of this manual. • VCR EMG code List Code 00h 10h 11h 12h 20h 21h 22h 23h 24h 25h
Coutents NO EMG CAM encode NG during unloading CAM encode NG during unloading CAM encode NG at intial T reel NG during unloading S reel FG NG T reel FG NG S reel FG NG T reel FG NG at initial S reel FG NG at initial
Code 30h 31h 40h 41h 42h 43h 44h 50h 60h 70h
–4–
Coutents Capstan FG NG at initial Capstan FG NG Drum FG NG Drum FG NG at initial Drum FG NG Drum PG NG Drum PG NG DEW FL NG DEW eject NG
3.
DISPLAY OF STANDBY LIGHT FLASH COUNT * One flash count is not used for self-diagnostic. < Diagnostic Item >
< Flash Count > 2 times
• +B OCP/OVP
P PUSH
TEMER REC REC
STANDBY lamp (RED)
• Vertical deflection stopped
4 times
• White balance failure
5 times
Lamp ON 0.3 sec. Lamp OFF 0.3 sec.
Lamp OFF 3.0 sec.
STOPPING THE STANDBY FLASH • Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY lamp from flashing.
4.
SELF-DIAGNOSTIC SCREEN DISPLAY
• For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurances of failure for confirmation on the screen: [To Bring Up Screen Test] • In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below: [Screen display] / channel [5] / Sound volume [-] / Power ON u ˘
+
Note that this differs from entering the service mode (mode volume [+]).
Self-Diagnosis screen display SELF CHECK 1:
2:1
3:
diagnostic item : result 4:0
5:1
VCR : -- --
Numeral "0" means that no fault has been detected. Numeral "1" means a fault has been detected.
EMG code.
Note: Though "1: , 3:" indicated, not using.
5.
HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAY
• Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. • Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs. [Clearing the result display] • To clear the result display to “0”, press buttons on the remote commander sequentially as shown below when the diagnostic screen is being displayed. • Pay attention when perform by the service mode, other all electric adjustment data will be rewrite.
Channel [8] / [0] [Quitting Self-diagnostic screen] • To quit the entire self-diagnostic screen, turn off the power switch on the remote commander or the main unit.
–5–
6.
SELF-DIAGNOSTIC CIRCUIT LED flash
IC001 µ-COM
STANDBY lamp
SCL1 49 D1304
RY603 RELAY 4 3
To item 2 and 5 via bus line
SDA1 47
53 LED
IC002
MEMORY 1
2 62 VCR PWR
Q601
OVP 64
ITEM 2 Over current Detection(OVP) Q606
60 V PULSE R611
V•STOP
R656
Q611 +B LINE
Q612
IC301 Y/C/J R679 D636
FBT (T801) ITEM 2. Over voltage Detection(OCP) ✩ Diagnostic screen display
IC901 TELE TEXT 62 – 62 R•G•B
SDA 35 SCL 34 15 VM OUT IK IN 21
CRT ITEM 4. Auto cut-off white balance detection(AKB)
R,G,B STOP IC501 Q502 7 BOOST VCC 3 C504
Q501
D502
R510
ITEM 3. Vertical Deflection output Detection (V•STOP)
C505
[+B overcurrent]
Owing to current increase voltage of R679 decrease and that it make Q611 and Q612 to become LOW and OFF RY601.
[+B over voltage]
When +B voltage become more than 142.5V, Q611 and Q612 pin become LOW and RY601 OFF.
[Vertical deflection stopped]
Detect Vertical deflection Pulse lost by IC001 ^º pin of micro computer. Mute the picture at !∞ pin of IC301 that performed by Y/C/J.
[White balance]
Detect when R.G.B. output wrong level balance of automatic white balance detecting standard pulse which detect cathode current, or which become low almost.
–6–
SECTION 1 GENERAL Overview of Remote Control Buttons Muting the Sound Displaying on Screen information Comprobación de los accsorios suministrados Press once to display On-Screen indications (first level). Press to mute TV sound. Press again to restore the sound.
Ejecting a videotape Press to eject the videotape
Selecting Teletext Press to switch on teletext.
Selecting TV mode Press to switch off teletext or video input.
The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remein as in the manual.
Overview of Video TV Buttons
Press twice to display On-Screen indications (second level) Press a third time to cancel.
Temporally Switch Off the Video TV Press to temporarily switch off the Video TV (the standby indicator on TV lights up). Press again to switch on the Video TV from standby mode. By using this button to turn off the Video TV instead of the Main Power on/off button, settings will not be cleared unless that the power is interrupted or you disconnect the AC power cord. In that case settings will be cleared after 7 days.
DIAL TIMER (see page 12)
VCR Operation buttons For details refer to “VCR Operation” section of this instruction manual.
Displaying the menu system Press to display the menu on the TV screen. Press again to remove the menu display from the TV screen.
Selecting Picture mode Press repeatedly to change the picture mode.
Fastext buttons
• When MENU is switched on: Use these buttons to operate the menu system. For details refer to “Introducing and Using the Menu System” of this instruction manual (see page 7). • When MENU is switched off and a tape is inserted: Use these buttons to operate VCR. For details refer to “Playing a Tape and Additional Tasks” section of this instruction manual (see page 10).
REC (Recording) button (see page11)
Tape transport buttons (see page 10).
Press on the mark on the front of the Video TV to reveal the front control panel.
Selecting input source Press repeatedly until the desired input symbol of the source appears on the TV screen.
TIMER REC (recording) indicator (see page 13)
Main Power On/Off switch If you turn off the Video TV by using this button and you do not turn on it again during 7 days, all the settings will be cleared.
Headphone Video Input jack jack
Sleep Timer For details refer to “Switching Off the Video TV Automatically (Sleep Timer)” section of this instruction manual (see page 9).
Standby Standby on/off indicator button By using this button to turn off Volume control buttons the Video TV instead of the Main Power on/off Programme Up or Down button, settings Buttons (Selects TV channels) will not be cleared unless that the power is Audio Selecting Input source interrupted or you Input TIMER disconnect the AC REC jack REC power cord. In that (recording) (recording) case settings will on/off button (see be cleared after 7 button (see page 11) days. page 13)
GB
Descripción general de los botonesOndel Timer Retroproyector
For details refer to “Teletext” section of this instruction manual.
–7–
Selecting channels Press to select channels. For double-digit programme numbers, e.g. 23, press -/-- first, then the buttons 2 and 3. If you enter an incorrect first digit, this should be corrected by entering another digit (0-9) and then selecting -/-- button again to enter the programme number of your choice.
For details refer to “Switching On the Video TV Automatically (On Timer)” section of this instruction manual (see page 9).
Selecting the TV Screen format Press to view programmes in 16:9 mode. Press again to return to Normal (4:3) mode.
Back to the channel last watched
Inserting Batteries into the Remote Control Make sure to insert the supplied batteries using the correct polarities. Always remember you dispose of used batteries in an environmental friendly way.
Press to watch the last channel selected (watched for at least 5 seconds).
Selecting channels Press to select the next or previous channel.
Adjusting TV volume Press to adjust the volume of the TV.
Connecting the Aerial Connecting cables are not supplied.
Besides TV functions, all buttons with green symbols are also used for Teletext operation. For more details, please refer to "“Teletext” section of this instruction manual (see page 18).
4
Overview
Overview-Installation
5
Switching On the Video TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast), 3) change the order in which the channels (TV Broadcast) appear on the screen and 4) confirm the clock setting. However, if you need to change any of these settings, you can do that by selecting the appropriate menu in the (Set Up).
Introducing and Using the Menu System Your Video TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on. 2• To highlight the desired menu or option, press
1 Connect the TV plug to the mains socket (220-240V AC, 50Hz)
• To enter to the selected menu or option, press
Press the main on/off button on the TV set to turn on the Video TV. The first time you press this button, a Language menu displays automatically on the TV screen.
2 Press the
or button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language.
• To return to the last menu or option, press
The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
3
Language English Deutsch Netherlands Français Italiano Español Português
The Video TV starts to automatically search and store all available channels (TV Broadcast) for you. This procedure could take some minutes. Please be patient and do not press any button. Otherwise the automatic tuning will not be completed.
/
or
.
Press the MENU button to remove the menu from the screen.
OK
Picture Adjustment
Do you want to start automatic tuning?
The “Picture Adjustment” menu allows you to alter the picture adjustments. OK
Ensure the aerial is connected and then press the OK button.
/
• To confirm and store your selection, press OK.
Yes No
4 A new menu appears on the screen asking you to check that the aerial is connected.
.
.
• To alter settings of your selected option, press
Select Language:
3
or .
To do that: by using the menu system and after selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also allows you to customise the picture mode based on the programme you are watching: Live (for live broadcast programmes). Movie (for films). Personal (for individual settings).
Please confirm that aerial is connected Confirm
OK
Auto Tuning Programme: System: Channel:
01 I C21
Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
GB OK
• Brightness, Colour and Sharpness can only be alterated if “Personal” mode is selected. • Hue is only available for NTSC colour signal (e.g: USA video tapes). • Select Reset and press OK to reset the picture to the factory preset levels.
Searching...
–8–
5 After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen.
Setting The Clock Manually
a) If you do not wish to change the channel order, press OK and go to step 6. b) If you wish to change the channel order: 1 Press the PROGR + or - button to select the programme number with the channel (TV Broadcast) you wish to rearrange appears on the screen. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press the OK button. The word Confirm is highlighted for a few seconds to confirm that the new programme position is stored. 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels.
The “Clock” option in the “Timer” menu allows you to set manually the clock whilst you are in TV mode. Programme Sorting Programme: Confirm:
To do that: by using the menu system and after selecting the option press
01 -> 01
Select channel: PROG + Select new position: Exit: OK
OK
The Video TV adjusts itself automatically clock setting, and after few seconds date and time settings are displayed. If you want to change the time settings, you can adjust it manually through the menu system (for details, see “Setting the Clock Manually” section of this instruction manual (see page 7).
Programme: Confirm:
OK
Auto Clock Set Adjusting Clock...
, then :
to select Off. Next
• II t is important you to set correctly the clock to use Timer Recording, Quick-Timer recording and On Timer functions. • If power is interrupted or you turn off the Video TV by using the main On/off power switch or you disconnect the AC power cord, after 7 days will cause these settings to be cleared. • To automatically set the clock, and whilst you are in TV mode select “Auto Adjust” “On” in the step above and in the “Programme” option select the from which programme number you want to get the time. • Because the Video TV gets clock settings from teletext signals (sent by broadcasters), even you have selected Auto Adjust “On”, we recommend you to check after summertime and wintertime that clock settings are correct, if not adjust it manually.
Clock
23-09-2000 15:00
Auto Adjust: Clock Programme: Manual Adjust: 23 09
2000
Off 03
SAT 15:00
OK
Auto Clock Set
Exit: OK
Press the MENU button to remove the menu from the screen.
or
2 Select Manual Adjust and press . With the day column highlighted, press or to set the date, then press and proceed in the same way to set the month, year, hour and minutes. Finally press OK.
02 -> 04
Select channel: PROG + Select new position: Exit: OK
23.09.2000
7
and next press
Programme Sorting
4 When you finish to rearrange the order of the channels, press OK.
6
1 With Auto Adjust highlighted, press press OK.
-
SAT
12:00
Automatically Tuning The Video TV The “Auto Tuning” option in the “TV Set Up” menu allows you to automatically search for and store all available TV channels. To do that: by using the menu system and after selecting the option, press and then proceed in the same way as in the section “Switching On the Video TV and Automatically Tuning”. (see page 6, steps 3 and 4).
Do you want to start automatic tuning? Yes No OK
Your Video TV is now ready for use
6
First Time Operation
Menu System - TV Operation
7
Changing The Programme Order Of The TV Channels The “Programme Sorting” option in the “TV Set Up” menu allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do that: by using the menu system and after selecting the option, press proceed in the same way as in the section “Switching On the Video TV and Automatically Tuning” (see step 5b) on page 6).
and then
Selecting The Language Of The Menu Screens
The “Language” option in the “Set Up” menu allows you to select the language that the menus are displayed in.
Programme Sorting Programme: Confirm:
To do that: by using the menu system and after selecting the option, press and then proceed in the same way as in the section “Switching On the TV and Automatically Tuning” (see page 6, step 2).
01 -> 01
Select channel: PROG + Select new position:
-
Set Up TV Set Up VCR Set Up Language Parental Lock: VHS: Picture Rotation:
Off Others 0 OK
OK
Locking The Video TV The “Parental Lock” option in the “Set Up” menu allows you to lock the buttons of the Video TV set. In this way, after this option is selected and the Video TV set is switched off, the buttons on the Video TV only works by using the remote control buttons.
Manually Tuning The TV The “Manual Programme Preset” option in the “TV Set Up” menu allows you to preset channels one by one to the programme order of your choice. To do that: 1 By using the menu system and after selecting the ”Manual Programme Preset” option, press . Then with Programme option highlighted press . Press or to select on which programme number you want to preset the channel. Then press . 2 After selecting the Channel option, press . Then press or to select the channel tuning (“C” for terrestrial channels or “S” for cable channels). Next press . After that, press the number buttons to enter directly the channel number of the TV Broadcast. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store.
To do that: by using the menu system and after selecting the option, press . Then press or to select On. Press OK to confirm and store and finally press . • To cancel this function afterwards, select “Off” instead of “On” in the step above. • If you have locked your Video TV and the remote commander is lost, press the button (during more than 5 seconds) on the set to operate it.
Manual Programme Preset Programme: System: Channel: AFT: Skip: Decoder: Confirm
01 I C 21 On No Off
Because of the earth’s magnetism, the picture might be slant. In this case, you can correct the pictures slant by using the option “Picture Rotation” in the “Set Up” menu. To do that: by using the menu system and after selecting the option, press . Then press or to correct any slant of the picture between -5 and +5 and finally press OK to store.
–9–
01 I C 21 On No Off
OK
Skipping Programme Positions The “Manual Programme Preset” option in the “TV Set Up” menu allows you to skip any unwanted programme numbers when they are selected with the PROGR +/- buttons.
3 With On Timer option highlighted, press Press OK. 4 Finally press the standby button automatically.
Manual Programme Preset 01 I C 21 On No Off
OK
• To cancel this function afterwards, select “No” instead of “Yes” in the step above.
The “Manual Programme Preset” option in the “TV Set Up” menu allows you to watch Pay-TV channels by connecting a Pay-TV decoder to the Scart connector :1/ placed on the rear of the Video TV.
• While you are recording a programme which is being recorded through the Pay-TV decoder, you will not be able to view other programmes through the decoder.
8
TV Operation
OK
GB
,
and then press
or
On Timer Time: Source: On Timer:
06: 00 TV PROG01 Off
OK
to select On.
. At the selected time, the Video TV switches on
• Any loss of power will cause these settings to be cleared. • By pressing the ON TIMER button on the remote control you can set on/off the On Timer, but it is not possible to change the time and programme settings.
Switching Off The Video TV Automatically (Sleep Timer)
Setting Pay-TV Channels To do that: by using the menu system and after selecting the “Manual Programme Preset” option, press . Then with the Programme option highlighted, press . Next press or to select the programme number with the scrambled channel and press . Select the Decoder option and press . Next press or to select On. Finally, press OK twice to confirm and store.
Off Others 0
The “On Timer” option in the “Timer” menu allows you to preset your Video TV to automatically switch on at a desired time. You can select the TV programme or video playback to be switched automatically on from standby mode. 1 With Time option highlighted, press . Press or to set the on-time hour then press . Proceed in the same way to set the minutes and press OK. 2 With Source option highlighted, press . Then press or to select the source to be switched on (“TV” or “VCR”). If you select “TV”, press and then press or to select the programme number you want the Video TV turns on. Press OK.
Programme: System: Channel: AFT: Skip: Decoder: Confirm
Set Up TV Set Up VCR Set Up Language Parental Lock: VHS: Picture Rotation:
Switching On The Video TV Automatically (On Timer)
Manual Programme Preset Programme: System: Channel: AFT: Skip: Decoder: Confirm
To do that: by using the menu system and after selecting the option press
To do that: by using the menu system and after selecting the “Manual Programme Preset” option, press . Then with the Programme option highlighted press . Next, press or to select the programme number you want to skip. Press . Then, select the Skip option and press . Next press or to select Yes. Finally press OK twice to confirm and store.
OK
(only for KV-21FV1U)
Fine Tuning Channels
To do that: while watching the channel (TV Broadcast) you wish to fine tune, and by using the menu system select the “Manual Programme Preset” option. Press . With the AFT option highlighted, press . Next press or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.
Off Others 0
Adjusting The Picture Rotation
OK
• Repeat all the above steps to tune and store more channels.
Normally the Automatic Fine Tuning (AFT) is operating, however by using the “Manual Programme Preset” option in the “TV Set Up” menu you can manually fine tune the Video TV to obtain a better picture reception in the case that the picture is distorted.
Set Up TV Set Up VCR Set Up Language Parental Lock: VHS: Picture Rotation:
You can automatically switch the video TV into standby mode after a selected time period. To do that: Press the SLEEP button on the remote control repeatedly to set the time period delay (OFF, 30, 60 or 90 minutes).
Manual Programme Preset Programme: System: Channel: AFT: Skip: Decoder: Confirm
01 I C 21 On No Off
OK
• While watching the TV, you can press the / button on the remote control to display the time remaining. • One minute before the Video TV switches itself into standby mode, a good night message will be displayed on the screen. • To cancel this function afterwards, select “Off” in the step above.
TV Operation
9
Playing a tape 1 Insert a cassette with the arrow indication
Recording TV programmes facing upwards.
1 In standby mode, press the standby button
•If you insert a cassette with its safety tab removed, playback starts automatically.
2 Press PLAY z and the playback starts. On Screen information is displayed for a few seconds.
2 Insert a cassette with a safety tab. 3 Press PROGR + or –, or the number buttons to select the programme number.
Additional Tasks You can operate all the video tasks by using the remote control buttons or the Video TV buttons.
To stop playback
to turn on the Video TV.
4 Press TAPE SPEED to select the recording speed: SP for Standard Play or LP for Insert this side into recorder
Long Play.
Do not touch the tape inside
• In the SP mode, the tape runs twice as fast as the LP mode. It means that in LP mode you can record double time than in SP mode.
Press STOP p and the Video TV returns to the normal TV picture.
To stop playback for a moment
5 Press REC r.
Press PAUSE P. Press it again or press to resume playback. ¥ If you leave your Video TV in pause mode, normal playback resumes after about 5 minutes.
The REC indicator on the front of the Video TV lights up and recording begins.
To fast forward or rewind the tape Press STOP p, then press FF ) to fast forward or press REW 0.
To stop recording
To view the picture in fast forward or rewind mode
Press STOP p.
or
Press and hold FF ) during fast forward or REW 0 during rewind. While you hold the button, you can view the picture. When you release the button, fast forward or rewind mode is resumed. If you use the buttons on the remote commander, press FF ) or REW0 once and will not be necessary to hold the button. In this case to resume normal playback, press PLAY z.
• When the tape reaches the end, the Video TV rewinds the tape automatically to the beginning, then stops. This function does not work when the power of the Video TV is off.
To pause recording
To search a tape at high speed
You can cut out an unwanted scene during recording with this button.
During playback, press and hold REW 0 (rewind) or FF ) (fast forward). A high speed picture appears on the TV screen.
pauses.
To eject a cassette
2 Press PAUSE P again to release the pause mode at the desired scene, then recording
Press EJECT 6.
resumes from the point set in step 1.
– 10 –
¥ You can eject the cassette even if the power is in standby mode.
Protecting your cassette against accidental erasure
GB
1 Press PAUSE P when an unwanted scene appears on the screen, then recording
¥ To resume normal playback, release the button.
• When the recording pause mode lasts for about 5 minutes, the Video TV stops recording to prevent tape damage.
Safety tab
Adhesive tape
To prevent accidental erasure, break off the safety tab as illustrated.
Continues Recording with the TV off Whilst you are recording, press . The Video TV is turned off. However, recording continues and the REC indicator on the Video TV lights up.
¥ To record on a cassette without a safety tab, simply cover the tab hole with adhesive tape.
Displaying On-Screen Information In Play mode, press the / button to display the following on-screen information. To show only the amount of remaining tape and the linear tape counter on the screen, press / again. To make the information disappear, press / repeatedly until no information is displayed on the screen.
Amount of tape remaining End of the tape
Beginning of the tape
S
E
Tape operation mode S
4 . 1 2 THU 20:00
SP
Current date and time
E 2:05:10
Linear tape counter
Resetting the tape counter The tape counter helps you to locate a certain scene after playback. Press the COUNTER RESET button on the remote control to set the counter to “00:00:00” before playing the tape. The tape counter is automatically reset to zero whenever a cassette is inserted. The Video TV keeps counting the length of the tape being played. Note, however, that the tape counter does not count the portions without video signals recorded.
10
VCR-Basic Operations
VCR-Recording
11
Recording TV Programmes Using the Timer
Recording TV programmes using DIALTIMER
This function allows you to preset your Video TV to record up to 5 programmes within a one-month period.
The Dial-Timer recording function allows you to preset your Video TV to record one programme within a 24 hour period. for setting the Dial-Timer, use DIAL TIMER button on the Video TV.
Before you begin: • Make sure that the clock is set correctly. if it is not, please refer to the section “Setting the Clock Manually”(see page 7). • Make sure that the loaded cassette has its safety tab intact.
Before you begin: • Make sure that the clock is set correctly. If it is not, refer to the “Setting the Clock Manually” section of this instruction manual (see page 7). • Make sure that the loaded cassette has its safety tab intact. • Make sure that the Video TV does not enter the timer recording standby mode (the TIMER REC indicator on the Video TV should not be lit).
1 In standby mode, press the standby button
Setting the Timer
1 In standby mode, press the standby button
2 Press the TIMER REC button to display the Programme List menu.
to turn on the Video TV.
3 Press
or repeatedly to set the date (for daily and weekly recording, refer to the section “Daily/Weekly Recording” below), then press .
2 Press DIAL TIMER. The “Dial Timer” menu appears on the screen. 3 Turn DIAL TIMER to set the hour of the start time, then press DIAL TIMER to confirm.
Programme List
4 Proceed in the same way as in step 3 to set recording start time, recording stop time, Turn
Press
4 Proceed in the same way as in step 3 to set the minutes of the recording start time, the recording time period and programme number to be recorded. • The hour increases or decreases by one hour. • The minutes increase or decrease by one minute. • The recording time period increases or decreases by 15 minutes. • The programme position changes as follows
Dial Timer START
23 SAT 23:00
DURATION
23 22:00
PROG
11:00
01
SAT
TAPE SPEED: SP OK CHANGE
CLEAR OK
SELECT
0 <—> 1 <—> 2... <—> 99 <—> L1 <—> L 2 <—> 0 <—>1 • L1 is used for the equipment connected to the Scart connector :1/ placed on the rear of the Video TV. • L2 is used for the equipment connected to the front connectors … and .
– 11 –
5 With TAPE SPEED highlighted, turn the DIAL TIMER to select
the recording speed: SP for Standard Play or LP for Long Play, then press the DIAL TIMER. • In LP mode you can record double time than in SP mode.
6 Turn DIAL TIMER to move the cursor to OK, then press DIAL TIMER to confirm all the settings. • If a warning message appear on the screen, the recording is cancelled and after proceed according the necessities, you must re-enter again the Dial timer settings.
The Dial Timer indicator on the Video TV lights up and the Video TV enters into the timer recording standby mode.
1 Press DIAL TIMER.
6 If you want to set more programmes, press Turn
Press
2 Turn DIAL TIMER to CHANGE (to change the recording settings) or to CLEAR (to clear the recording settings) and press DIAL TIMER.
If you have selected CLEAR, press DIAL TIMER and all the settings will be cleared. b) If you have selected CHANGE, you can change all the settings by following steps from 2 to 5 of the above section “Recording TV Programmes using DIAL TIMER”.
then press OK. Repeat steps from 3 to 5.
or
7 After setting all your desired programmes press Dial Timer START
3 a)
programme number, tape speed (SP or LP) and VPS/PDC “On” or “Off”. If you have made a mistake during timer setting, press to return to the previous position and correct the setting. • Date: Daily/Weekly Recording You can preset your Video TV to record the same programme every day of the week (daily recording) or the same programme on the same day every week (weekly recording). Whilst you are in DATE position, with each press of , the setting changes as follows: 23 SAT (today) —> MON-SUN —> MON-SAT —> MON-FRI —> SAT (means every Saturday...) —> FRI —> SUN —> 22 (next month).—>... • Time: • The hour increases or decreases by one hour. • The minutes increase or decrease by one minute. • Programme number: • The programme position changes as follows: 0 <—> 1 <—> 2... <—> 99 <—> L1 <—> L 2 <—> 0 <—>1 • L1 is used for the equipment connected to the Scart connector :1/ placed on the rear of the Video TV. • L2 is used for the equipment connected to the front connectors … and . • Tape Speed: • In “LP” mode you can record double than in SP mode • VPS/PDC: • For details refer to “Timer recording with VPS/PDC signals” section of this instruction manual (see page 14).
23 SAT 20:00
VPS DATE START STOP PROG PDC 23 SAT 22:00 OK
ADD
23:00 03 SP ON
CHANGE
CLEAR OK
GB
5 Press OK.
Changing or Cancelling the Dial Timer settings The Dial Timer menu appears on the screen.
to turn on the Video TV.
23 SAT 23:00
DURATION
23 22:00
PROG
11:00
01
SAT
TAPE SPEED: SP OK CHANGE SELECT
CLEAR
the OK button to confirm your settings.
to move the cursor to ADD and
or
and highlighting OK, press
The TIMER REC indicator on the Video TV lights up and the Video TV enters into timer recording standby mode.
OK
To Stop Timer Recording Press the ON/OFF button on the remote control. Then the TIMER REC indicator on the Video TV turns off.
Using the Video TV before Timer Recording starts You can watch a TV programme, check the timer settings and reset the counter in timer recording standby mode. However, if you want to eject the cassette, use the tape operation buttons, change or cancel the timer settings, you have to press the ON/OFF button on the remote control to turn off the TIMER REC indicator on the Video TV set. Remember to press again the ON/OFF button to make the TIMER REC indicator lights up again and the set comes back into the timer recording standby mode.
12
VCR-Recording
VCR-Recording
13
Timer recording with VPS/PDC signals
Guide Channels for VideoPlus+
Some broadcasting system transmits VPS (Video Programme System) signals or PDC (Programme Delivery Control) signals with the TV programmes. These signals assure you that your timer recordings are made regardless of broadcast delays, early starts, or broadcast interruptions. For example, if an urgent news bulletin interrupts a regular programme, recording stops. As soon as the interrupted programme resumes, recording starts again. To do that:
1 When you set a programme to be recorded by using the timer, (refer to the “Setting the Timer” section on page 13), set VPS/PDC to On.
•If recording times overlap due to a VPS/PDC time shift, the programme that was broadcast first has priority. Recording of the second programme begins when the first programme has finished. •If the Video TV could not receive VPS/PDC signal because it was too weak or because the station failed to transmit VPS/PDC signals, timer recording is made without the VPS/PDC function.
Guide channel
Station name
001 002 003 004 005 006 101 102 103 104 105 106
BBC1 BBC2 ITV CHANNEL 4 RTE (IRELAND) NETWORK 2 (IRELAND) SKY ONE SKY NEWS SKY MOVIES THE MOVIE CHANNEL SKY SPORT NICKELODEON VH-1 GERMANY EUROSPORT GALAVISION MTV EUROPE CHILDREN´S CHANNEL THE FAMILY CHANNEL SKY MOVIES GOLD BBC WORLD SERVICE RTL 4 SUPER SPORT FILMNET 2 FILMNET + RTL PLUS INTERNATIONAL SAT 1 PREMIERE 3 SAT ARD PRO 7 TELE 5 TELECLUB
107 108 109 110
Recording TV Programmes Using VideoPlus+ *
111 112 113 114
*
115 116 117 118 119 120 121 122
VideoPlus+ is a trademark applied for by Gemstar Development Corp. VideoPlus+ system is manufactured under license from Gemstar Development Corporation.
The VideoPlus+ function allows you to simplify the task of making timer recordings. Using VideoPlus+, you can make all the necessary settings by just entering the desired programme’s 9-digit code, which is available in your local programme guide.
Guide channel 123 124 125 126 127 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149
Station name UK GOLD DISCOVERY THE LEARNING CHANNEL BRAVO ADULT CHANNEL CNN EURONEWS QVC UK LIVING TV-X RAI 1 RAI 2 TV5 EUROPE TVE INTERNATIONAL MBC/ARABIC VTM SPORTNET COUNTRY MUSIC TV VIDEO HITS ONE VH-1 SKY SPORT 2 & SOAPS & TRAVEL TV ASIA LA-5 LIVE TV SUPERCHANNEL JAPAN TV SELECT TV MOVIE CHANNEL FILMNET 1 SKY SPORT 3 TNT CARTOON NETWORK
Before you begin:
Checking/Adding/Changing/Cancelling the Timer Settings
• Make sure that the loaded cassette has its safety tab.
1 In standby mode, press the standby button
to turn on the Video TV.
GB
1 Press the TIMER REC button on the remote control to display the list of the timer
2 Press the VIDEOPLUS+ button to display the VideoPlus+ menu.
settings that you preset. If you just want to check the list, go to step 4. If you want to add, change or clear any setting, please follow all the steps below.
3 Press the number buttons to enter the desired programme’s VideoPlus+ number and
– 12 –
press OK.
• If you have made a mistake, press
and re-enter the correct number.
2
Press
3
a)To add new settings: Repeat steps from 3 to 7 of the section “Setting the Timer” (see page 13).
or
repeatedly to select ADD, CHANGE or CLEAR and press OK.
4 On the screen appears automatically date and time recording settings. With PROG column highlighted, press press .
5 Press
or
or
to select the correct programme number and then
to select the recording speed: SP or LP. Then press
.
• In LP mode you can record double time than in SP mode.
6 Highlighting the VPS/PDC column, press
or to select On or Off. (for details, refer to “Timer recording with VPS/PDC signals” section above). Then press .
Video Plus+ 23 SAT 22:00 Plus Code
[1 2 6 - - - - - -] Set 0-9 and press
Video Plus +
7 The Programme List menu appears on the screen. If recording settings are correct, highlighting OK, press the OK button to confirm.
OK
23 SAT 22:00
Plus Code
[1 2 6 1 9 6 3 3 6] VPS DATE START STOP PROG PDC 23SAT 22:00 23:00 03 SP ON
8 If you want to check, add, change or cancel your settings please refer to the
Select Programme:
OK
“Checking/Adding/Changing/Cancelling the Timer Settings” section (see page 15). Programme List
The TIMER REC indicator on the front of the Video TV lights up and the set enters into timer recording standby mode.
23 SAT 20:00
VPS DATE START STOP PROG PDC 23 SAT 22:00 OK
ADD
23:00 03 SP ON
CHANGE
VCR – Recording
23 SAT 20:00
VPS DATE START STOP PROG PDC 23 SAT 22:00 OK
ADD
23:00 03 SP ON
CHANGE
CLEAR OK
If you notice you have overlapped timer settings, you can correct the settings as mentioned above. Otherwise, the second programme starts recording only after the first programme has finished. c) To clear the settings: Press or repeatedly to move the cursor to the setting you want to delete, then press OK. The setting is cleared and “--“ appears.
4 When you finish adding, changing or cancelling the settings, press
or
to select
OK and then press the OK button.
CLEAR OK
14
Programme List
b) To change the settings: Press or repeatedly to move the cursor to the setting you want to change, then press OK. Finally repeat steps from 3 to 7 of the section “Setting the Timer” (see page 13).
If there are other timer setting on the list, the Video TV enters the timer recording standby mode and the TIMER REC indicator on the Video TV set lights up.
VCR-Recording
15
Playing a Tape Repeatedly
Setting the Colour System The colour system is set in “Auto” condition. However, by using the “Colour System Option” in the “VCR Set Up” menu allows you to, set the colour system to the corresponding system that the tape was recorded in the case that you notice streaks appearing on the screen during playback
The “Auto Repeat ” option in the “VCR Set Up” menu allows you to play a recorded tape repeatedly. To do that: by using the menu system and after selecting the option, press . Then press or to select On. Finally press PLAY z to start the playback. When the tape reaches its end, the video TV rewinds the tape to the beginning and then, plays it again.
To do that: Whilst you are in play mode and by using the menu system, select the Colour System option and press . Then press or to select the corresponding colour system (Auto, MESECAM, PAL or NTSC). Finally, press OK.
VCR Set Up Tracking Control: OPC: Auto Repeat Format: Colour System:
• To cancel this function afterwards, select “Off” instead of “On” in the step above.
On Off Normal Auto
VCR Set Up Tracking Control: OPC: Auto Repeat Format: Colour System:
• To cancel this function afterwards, select again “Auto” in the step above.
On Off Normal Auto
OK
OK
Searching Using the Index Function The Video TV marks the tape with an index signal at the point where each recording begins. These signals can be used to find a specific recording. this Video TV can search up to 99 index signals ahead of or behind the current position.
Viewing Programmes in 16:9 Mode When viewing recording of programmes which were originally broadcast in 16:9 mode, you can set your Video TV to 16:9 mode to prevent a distorted picture.
To do that: 1 Insert a tape.
To do that: : Press repeatedly the button on the remote control to select 16:9 or Normal (4:3 format). You can also do it, by using the menu system. In that case, select the Format option in the “VCR Set Up” menu and press . Then press or to select 16:9 or Normal. Finally, press OK.
2 Press INDEX = or + repeatedly to specify how many index signals ahead or behind you want to search in relation to the current tape position. The Video TV begins searching for the selected index. When the index is reached, playback begins automatically.
• When you change channels, switch between input sources or turn the power on and off, the Video TV will switch back to normal mode.
• You can stop searching by pressing STOP p.
or
VCR Set Up Tracking Control: OPC: Auto Repeat Format: Colour System:
On Off Normal Auto
OK
GB
– 13 –
Adjusting the Tracking The tracking condition is automatically adjusted on this Video TV. The AUTO TRACKING message appears while the Video TV is searching for the best tracking condition. However, if streak or snow noise appear on the video playback, you can adjust the tracking condition manually by using the “Tracking Control” menu in the “VCR Set Up” menu. To do that: Whilst you are in play mode and by using the menu system, select the Tracking Control menu and press . Press or to select Manual and press . When the tracking meter appears on the screen press or to reduce the picture noise and get the best picture noise. Finally press OK.
When Connecting to a Sony VCR Tracking Control: OPC: Auto Repeat Format: Colour System:
If you use this Video TV with another Sony VCR, the remote control may accidentally operate both the Video TV and VCR at the same time. The VHS option in the “Set Up” menu allows you that the remote control operates only this Video TV.
Tracking Control
VCR Set Up
Auto Manual
On Off Normal Auto
OK
OK
To do that: by using the menu system and after selecting the VHS option, press press or to select Sony. Finally, press OK. • To cancel this function afterwards, select “Others” in the step above.
Tracking Control
. Then
Set Up TV Set Up VCR Set Up Language Parental Lock: VHS: Picture Rotation:
Off Others 0 OK
OK
• To cancel this function afterwards, select again “Auto” instead of “Manual” in the step above.
Adjusting the Picture with the Optimum Picture Control (OPC) The “OPC” option in the “VCR Set Up” menu allows you to improve playback and recording quality by adjusting the system parameter automatically according to the condition of the video tape. The OPC function works on all types of tapes, even on rental tapes. This function is set to “On” at the factory. To maintain better picture quality, we recommend to leave the function on. To do that: Whilst you are in play mode and by using the menu system, select the OPC option and press . Then press or to select On or Off. Finally press OK.
16
VCR-Additional Operations
VCR Set Up Tracking Control: OPC: Auto Repeat Format: Colour System:
On Off Normal Auto
OK
VCR-Additional Operations
17
Connecting Optional Equipment
Teletext
Using the following instructions, you can connect a wide range of optional equipment to your Video TV set. (Connecting cables are not supplied).
Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100) gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below. Make sure to use a channel (TV Broadcast) with a strong signal, otherwise teletext errors may occur. To Switch On Teletext: After select the channel (TV Broadcast) which carries the teletext you wish to view, press .
TELETEXT Index Programme News Sport Weather
25 153 101 98
C
To Select a Teletext page: Input 3 digits for the page number, using the numbered buttons. • If you have made a mistake, retype the correct page number. • If the counter on the screen continues searching, it is because this page is not available. In that case, input another page number.
1
A
To access the next or preceding page: Press PROGR + ( ) o PROGR - ( ). To superimpose teletext on to the TV: Whilst you are viewing teletext, press . Press it again to cancel teletext mode. To freeze a teletext page: Some teletext pages have sub-pages which follow on automatically. To stop them, press / . Press it again to cancel the freeze.
“PlayStation”*
VCR
Decoder
* “PlayStation” is a product of Sony Computer Entertainment, Inc. * “PlayStation” is a trademark of Sony Computer Entertainment, Inc.
GB
Using Optional Equipment
– 14 –
In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the connector to which you have connected the device. e.g.: You have connected a “PlayStation” to the connector with the symbol :1/ . Press the button … on the remote control repeatedly until you see the symbol …1 on the screen.
To reveal concealed information (e.g: answer to a quiz): Press / . Press it again to conceal the information. To Switch Off Teletext: Press .
2
B
1
Connect your equipment to the designated Video TV socket, as indicated above.
2 To watch the picture of the connected equipment, press the … button repeatedly until the correct input symbol appears on the screen.
Fastext
Symbol
Fastext service lets you access pages with one button push. While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to access the corresponding page.
1 2
Input Signals • Audio / video input signal through the Scart connector C. • RGB input signal through the Scart connector C. • Video and audio input signals through the phono sockets A and B.
3
Switch on the connected equipment.
4
Press
button on the remote control to return to the normal TV picture.
Editing with another VCR Using an additional VCR and connecting as it is in the section above “Connecting Optional Equipment”, you can edit a tape.
18
Additional Information Teletext
19
Troubleshooting
Video Head Cleaning Even the Auto Head Cleaner built into this set automatically cleans the video heads when a cassette is loaded or unloaded. However, if the playback pictures are noisy and hardly visible or no picture appears, video heads probably need an extra cleaning. In this case, clean the video heads using the V-25CL video head cleaning tape (not supplied) or ask Sony service personnel to clean the video heads.
If you have any problems while viewing your Video TV, please check the following troubleshooting guide. If the problem persists, contact your Sony dealer. Solution
Problem TV Section
Do not use a commercially available wet-type cleaning tape, as it may damage the video heads.
No picture (screen is dark) and no sound.
• Check the aerial connection. • Plug the Video TV in and press the indicator is on, press button.
Symptoms caused by contaminated video heads
Poor or no picture (screen is dark), but good sound.
• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to the factory settings.
No picture when watching equipment connected to the Scart connector.
• Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen.
Good picture, no sound.
• Press the
No colour on colour programmes.
• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to factory settings.
Distorted picture when changing programmes or selecting teletext.
• Turn off any equipment connected to the Scart connector on the rear of the TV.
Picture slanted (only for KV-21FV1U).
• Using the menu system, select the “Picture Rotation” option in the “Set Up” menu to correct the picture slant.
Noisy picture when viewing a TV channel.
• Using the menu system, select the “Manual Programme Preset” menu and adjust Fine Tuning (AFT) to obtain better picture reception.
Clock section The clock has stopped and “--:--“ is displayed.
• Reset the clock and timer settings. for details refer to the section “Setting the Clock Manually” (see page 7).
Playback section Power is on, but the tape does not run.
• Switch off, disconnect the AC power cord and leave the set for about one minute.
• Normal picture
• Rough picture
initial
• Unclear picture
• No picture (or black& white screen appears)
terminal
Worn Video heads
– 15 –
If your Video TV displays a poor picture after you clean the video heads, you may need to replace them. Consult your dealer or the Sony Service Centre nearest you.
+/- button on the remote control.
Poor playback picture.
• Using the menu system, select the “VCR Set Up” menu and check the “Colour System” option. • Adjust the tracking manually. For details refer to the section “Adjusting the Tracking” (see page 16). • Clean the video heads. For details refer to the section ”Video Head Cleaning” (see page 20). • Use a new tape.
The sound drops out.
• Use a new tape.
Check the video heads after 1,000 hours of use A Video TV is a high precision machine. It must record on or play from magnetic tapes on which the image signals from the colour TV or the video camcorder are recorded. The video heads or mechanical parts for transporting the tape are contaminated or worn after extended use. You should have your Video TV checked after each 1,000 hours of use.
button on the front of TV or if the standby
Recording section The cassette is ejected when you press REC r.
• Cover the safety tab hole. For details refer to the section “ “Protecting your cassette against accidental erasure” (see page 10).
Cannot record.
• Insert a cassette with its safety tab intact. • Rewind the tape.
Timer recording section Cannot program a recording using the timer.
• Set the current time and date. For details refer to the section “Setting Clock Manually” (see page 7).
The cassette is ejected when you press TIMER REC ON/OFF.
• Cover the safety tab hole. For details refer to the section “ “Protecting your cassette against accidental erasure” (see page 10).
The TIMER REC indicator on the front of the Video TV does not light up even though you press TIMER REC ON/ OFF.
• Insert a cassette with its safety tab intact. • Rewind the tape. • Check the settings for timer recording. For details refer to the section “Checking/ Adding/Changing/Cancelling the Timer Settings” (see page 15).
Others A cassette cannot be inserted.
• Press EJECT 6 to eject the cassette that it is already inserted.
Remote control does not function.
• Replace the batteries.
The standby indicator TV flashes.
• Contact to your nearest Sony service centre.
on the Video
In case of problems, have your TV serviced by qualified personnel. Never open the casing yourself.
20
Additional Information
22
Additional Information
SECTION 2 DISASSEMBLY 2-1. REAR COVER REMOVAL
2-2. CHASSIS ASSY REMOVAL
2 Rear cover
1 Eight screws (+BVTP 4 X 16)
2 Chassis assy 1 Two screws (+BVTP 4 X 16)
2-3. SERVICE POSITION (A BOARD)
2-4. A BOARD REMOVAL
CV board
1 Three screws (+BVTP 3 X 12) 3 A board
Insulator Terminal board
A board
Claw 2 Two Claws
Claw
Note: Open the A board after slide the terminal board
– 16 –
2-5. HARNESS LOCATION
Demagnetic coil
Anode cap
Deflection yoke
NA rotation coil
DGC holder
DGC holder
VM coil
CVM board
Speaker
H10 board MA10 board
CN1301 CN002
CN251 CN1703
CN305
CN1702
CN1003
CN1701
CN001
CN302
CN301
CN306
CN803
CN1001
CN1002
CN701
CN801
A board
CN401
CN604
CN606 CN603 CN601
FBT CN707 CN706
CN1705 CN702
CN1801
C703
CVM board
Choke coil (21inches model only)
CN1703
– 17 –
Power cord
2-6. PICTURE TUBE REMOVAL 7Two DGC clips 9Two spring 8Demagnetization
2 Two screws (+BVTP 4 X 16)
4 CV board 5 NA rotation coil 3 Chassis assmbly 6 Deflection yoke 0 Four screws (Tapping screw 5)
!¡ Picture tube
1 Anode cap
Cushion
•
Removal of anode-cap
NOTE : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode.
•
removing procedures
1 Turn up one side of the rubber cap in the direction indicated by the arrow a.
a
a
2 Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b.
3 When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c.
•
how to handle an anode-cap
1 Don't hurt the surface of anode-caps with shaped objects! 2 Don't press the rubber too hard so as not to hurt inside of anode-caps! A metal fitting called the shatter-hook terminal is built into the rebber. 3 Don't turn the foot of rubber over too hard! The shatter-hook terminal will stick out of damage the rubber.
b b
c
– 18 –
SECTION 3 SET-UP ADJUSTMENTS •
The following adjustments should be made when a complete
Perform the adjustments in the following order:
•
realignment is required or a new picture tube is installed. These adjustments should be performed with the rated
1. Beam Landing 2. Convergence
power supply voltage, unless otherwise noted. The PICTURE and Brightness controls should be set as follows
3. Focus 4. Screen (G2)
unless otherwise noted:
5. White Balance 6. Picture Distortion
CONTRAST .......................... 100% (LIVE) BRIGHTNESS control .......... 50%
Note: Test Equipment Required.
COLOUR .............................. 50% HUE ....................................... 50%
1. Color bar/Pattern Generator 2. Degausser
SHARPNESS ........................ 50%
3. Oscilloscope
Preparation: • In order to reduce the influence of external magnetic forces on the picture tube, face the TV set in an easterly or westerly direction. •
Turn the power switch for the unit ON and erase the magnetic force using a degausser.
3-1. BEAM LANDING
B
1. Degauss CRT screen. 2. Inut all-green pattern.
R G
3. Adjust roughly landing at the centre of the screen by moving the purity magnet.
Fig.3-2
4. Adjust toughly landing at both right and left sides of the screen by sliding the DY forward or backward. 5. Adjust landing according to the lupe method or the allowance mothod. 6. Adjust DY so the horizontal tilt of DY is within the standard. Product standard is as follows. ± 1°
Fig.3-3
Purity control corrects this area.
± 1°
a
7. Use disk magnet, if landing at the corner is not good. Disk mg shold be applyied on the funnel. Don't use mag if possible because of picture distortion. 8. Screw down the DY.
c
b Disk magnets or rotatable disk magnets correct these areas (a-d).
d
Deflection yoke positioning corrects these areas.
a
Purity control c b
d
Fig.3-1
– 19 –
Fig.3-4
•
3-2. CONVERGENCE
Movement of red, green and blue dots by V. STAT tilting and opening or closing.
Purity
1
BMC magnet Vertical static convergence magnet
2
Movement of opening or closing the V. STAT convergence magnet. B
B
G R
G R
Movement of tilting the V. STAT convergence magnet counterclockwise. R
G B
(1) Horizontal and Vertical Static Convergence 1. Receive the channel with dot signal. 2. Minimize BRT and set picture level to the position where the dot is easy to see.
3
Movement of tilting the V. STAT convergence magnet clockwise.
3. Adjust horizontal convergence at the centre of the screen with V. STAT correction piece.
B
G R
4. Adjust vertical convergence of dot at the centre of the screen with V. STAT MG. 5. Adjust repeatedly static convergence according to righe figure in case that both HMC and VMC are not independant.
4
In case of both HMC and VMC exist attach BMC magnet to neck assembly.
Movement of tilting and opening or closing the V. STAT convergence magnet. R
B
Case of HMC attached Turn BMC over in case of adjustment in opposite direction.
G
Use BMC mg only when it is necessary, for it makes CRT focus worse.
Center dot
G R
B
•
If the blue dot did not harmonize with red and green, then use the BMC magnet to adjust. 1)HMC (Horizontal mis-convergence) correction
R G
HMC correction (A)
B R G B
R G
HMC correction (B) R
B
A
D
RV702 (H-STAT)
Fig.3-5
C D G
D B
– 20 –
C=D C
B
R G B
A=B
R
GB
A>B
R G B
C=D
R C G D
R C
B
D
G B
B
(2) Convergence adjustment of screen surroundings. (Dynamic convergence)
3-3. FOCUS ADJUSTMENT
1. Recieve dot pattern. 2. Set BRT to main and PIC to the level where dot pattern is
1. Receive monoscope pattern. 2. Adjust FBT focus VR so that the picture has the best focus. Adjust the focus so that the center of the screen is in the best focus.
easy to see. 3. Shake DY up and down. Insert DY spacer at position 'A' so
Turn focus VR clockwise to the end and then turn back counter clockwise.
that cross MIS convergence is minimum. 4. Shake DY right or left and insert DY spacer at position 'C'
While turning back, pay attention to the centre cross of the colour pattern, and then adjust the VR so that horizontal line
and 'D' where tilt is the smallest both on vertical and horizontal axis.
because clear and vertical line begins to become unclear. Change signal to dot pattern, confirm that corner focus is good. 3. Receiving white signal, confirm that magenta ring is hardly noticed.
R B G R B G G R G B R B
B G R R G B
R G B B G R
Fuoco
Schermo
Fig.3-8
B R G B R G G B G R B R
3-4. SCREEN (G2) ADJUSTMENT 1. Receive a Black signal, Cross and Hatch signal or dots signal. 2. Make sure to be in Personal, reset condition. 3. Adjust screen VR on FBT so that highest level of black area
Fig.3-6
among kathodes is 175 ± 2 V. a b
a
b
a-d : screen-corner misconvergence c
d c d
Fig.3-7
– 21 –
3-5. WHITE BALANCE ADJUSTMENT 1. Input ehite pattern. Adjust white balance of drive side, using service mode VP No. 22 RAMP, No. 23 GAMP and No. 24 BAMP, so that colour temperature is 8600 K + 0 MPCD. 2. Input gray pattern for 10NIT. Adjust white balance of cut-off side, using service mode No. 25 RCUT, No. 26 GCUT and No. 27 BCUT, so that colour temperature is 8600 K + 0 MPCD. 3. To take tracking, confirm again that colour temperatures of both side are within the limit of the above standard 8600 K + 0 MPCD. If necessary, re-adjust. W/B Specification: H/L difference = 2JND or less C/O difference = 3JND or less
3-6. PICTURE DISTORTION ADJUSTMENT •
When performing these adjustment, do receive monoscope signal.
VP01 (HSIZ)
VP07 (AFBW)
VP02 (HPOS)
VP08 (PAMP)
VP03 (VSIZ)
VP09 (VPOS)
VP04 (LCPN)
VP10 (VLIN)
VP05 (UCPN)
VP11 (SCOR)
VP06 (AFAG)
VP13 (TRAP)
– 22 –
SECTION 4 CIRCUIT ADJUSTMENTS 4-1. ADJUSTMENTS WITH COMMANDER 6. WRITING "STANDARD VALUE"
1. ENTERING SERVICE MODE 1) Turn on the main power of the set and enter into stand-by mode.
1) Set to service mode. 2) When push 5 button on the remote commander green
2) Press the following sequence of buttons on the Remote Control Commander.
colored "INITIAL write" indicates on the screen right above. Continuing to press - button while words are displaying (about 3 seconds). Display turns to red colored "INITIAL write" then the screen become pitch-dark and select 1ch
ON SCREEN DISPLAY
about 5 seconds after. Then it turns green colored "G" display.
+
CH “ 5 ”
Perform writing "standard value" standard data in micro computer will write to the MEMORY and set to initialization
VOLUME (+) POWER “ ON ” (REMOTE CONTROL POWER “ ON ”)
state all. Note: When exchange only MEMORY IC002, perform "standard u
value" writing in the begginning.
2. TO READ THE MEMORY 1) Set to service mode. 2) When push these buttons 7 n - on the remote commander, it would read all item's adjustment value and switch set-up value which written in the memory. Note: Do not read before "standard value" writing when exchange the MEMORY IC002. 3. PICTURE ADJUSTMENT 1) Select adjustment item number of service mode by 1 and 4 buttons on the remote commander. 2) Adjust 3 and 6 buttons to satisfy set-up value and picture condition of the screen. 4. WRITE TO THE MEMORY •
After adjusted, write to the MEMORY by MUTE and buttons and push - button while green "light" word indicated on the picture display (about 3 seconds). It takes about 1 second to complete the writing to the MEMORY. When red "light" displayed turns to "G" and that makes writing completely finish.
Color of the screen displayed light word. MUTE button on ..................... Green word - button on ........................... Red word 5. RELEASE THE SERVICE MODE • Turn off TV set and turn on again or turn off by the remote commander, and turn off by the remote commander again by stand-by state to disappear serivce display and set to normal TV mode.
– 23 –
4-2. ADJUSTMENT METHOD Service adjustment to this model can be performed with the supplied Remote Control Commander RM-955, 956. •
HOW TO ENTER INTO SERVICE MODE
Entering the service mode
When exchange the MEMORY IC002 (MA10 board)
When exchange the board
Perform “standard value” writing
When repair connected with picture quality
A board deflection system exchange CRT and DY.
A board
YCJ adjustment Deflection circuit adjustment Micro computer adjustment
Write to the MEMORY
Note :
•
Release the service mode.
• Write to the MEMORY every performing one item adjustment. • Before writing to the MEMORY adjusted data would not memorize when turn off.
R E M OT E C O M M A N D E R ' S F U N C T I O N I N SERVICE MODE
•
SERVICE MODE DISPLAY
No. Write memory After pressed "0" button
Releace service mode
DATA
VP00 VPOS 000 SERVI 21 D05 VPS NS
Adjustment item up Adjustment item down Read memory After pressed "0" button
Data up Data down Write standard value After pressed "0" button Perform read and write
– 24 –
SERVICE ITEM
4-3. SERVICE DATA No.
DISP
VP00 VP01 VP02 VP03 VP04 VP05 VP06 VP07 VP08 VP09 VP10 VP11 VP12 VP13 VP14 VP15 VP16 VP17 VP18 VP19 VP20 VP21 VP22 VP23 VP24 VP25 VP26 VP27 VP28 VP29 VP30 VP31 VP32 VP33 VP34 VP35 VP36 VP37 VP38 VP39 VP40 VP41 VP42 VP43 VP44 VP45 VP46 VP47 VP48 VP49 VP50 VP51 VP52 VP53 VP54 VP55 VP56 VP57 VP58 VP59 VP60
SBRT HSIZ HPOS VSIZ LCPN UCPN AFAG AFBW PAMP VPOS VLIN SCOR AFC TRAP HBLK LBLK RBLK VUND EHT HSS VSS HMSK RAMP GAMP BAMP RCUT GCUT BCUT SCOL SHUE SSHP SHPF PREL GAMM ABLM VTH DYCL YDC RON GON BON CDMD HOSC VMSW YDE PAF IDS IDP IDL BELL SCSE GDSE BDSE RCSE GCSE BCSE GDLI BDLI RCLI GCLI BCLI
DATA RANGE 00-3F 00-3F 00-3F 00-3F 00-3F 00-3F 00-0F 00-0F 00-3F 00-3F 00-0F 00-0F 00-03 00-0F 00-01 00-0F 00-0F 00-01 00-0F 00-01 00-01 00-01 00-3F 00-3F 00-3F 00-0F 00-0F 00-0F 00-3F 00-1F 00-0F 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-01 00-03 00-0F 00-01 00-0F 00-03 00-03 00-03 00-03 00-3F 00-3F 00-0F 00-0F 00-1F 00-1F 00-1F 00-0F 00-0F 00-0F 00-0F 00-0F
STANDARD DATA 17 27 1B 1D IE 17 07 07 0C 22 07 07 01 06 00 07 07 00 07 00 00 01 21 14 0F 0F 06 00 21 1F 07 00 00 02 01 01 01 01 01 01 01 00 07 00 00 00 02 02 02 25 1F 07 07 10 10 10 07 07 07 07 07
ITEM SUB BRIGHT H SIZE H POSITION V SIZE LOWERSIDE CORNER PIN UPPERSIDE CORNER PIN AFC ANGLE AFC BOW PIN AMPLITUDE V POSITION V LINEARITY S CORRECTION AFC LOOP GAIN SWITCHING TRAPEZIUM H BLANKING LEFT H BLANKING RIGHT H BLANKING V UNDER SCAN EHT COMP SLICE LEVEL OF H SYNC SEPARATION SLICE LEVEL OF V SYNC SEPARATION H MASK R DRIVE G DRIVE B DRIVE R CUTOFF G CUTOFF B CUTOFF SUB COLOR FOR PAL SUB HUE SUB SHARPNESS SHARPNESS F0 SWITCHING PRE/OVER-SHOOT RATIO SWITCHING GAMMA CORRECTION ABL MODE ABL VTH DYNAMIC COLOR DC TRAN R ON G ON B ON COUNT DOWN MODE H VCO’S OSCILLATION VM SW Y DELAY PB AFC ID START ID STOP ID LEVEL BELL F0 SUB COLOR FOR SECAM G DRIVE (SECAM) *DISPLAY -7 to +8* B DRIVE (SECAM) *DISPLAY -7 to +8* R CUTOFF (SECAM) *DISPLAY -15 to +16* G CUTOFF (SECAM) *DISPLAY -15 to +16* B CUTOFF (SECAM) *DISPLAY -15 to +16* G DRIVE (LIVE) *DISPLAY -7 to +8* B DRIVE (LIVE) *DISPLAY -7 to +8* R CUTOFF (LIVE) *DISPLAY -7 to +8* G CUTOFF (LIVE) *DISPLAY -7 to +8* B CUTOFF (LIVE) *DISPLAY -7 to +8*
– 25 –
DEVICE CXA2139S (Y/C/J)
No.
DISP AMFM GAIN GATE TOP
DATA RANGE 00-01 00-01 00-01 00-1F
STANDARD DATA 00 00 00 10
IF00 IF01 IF02 IF03
ITEM AUTO MUTE FM AUDIO GAIN GATING (POSITIVE MODULATION) TAKE OVER POINT *DISPLAY -16 to +15*
IF04 IF05
TAGC VAGC
00-1F 00-1F
10 10
AGC FOR TV TUNER *DISPLAY -16 to +15* AGC FOR VCR TUNER *DISPLAY -16 to +15*
No.
DISP
OP00 OP01 OP02 OP03 OP04 OP05 OP06 OP07 OP08 OP09
OSDH NS LWAI HDCG MUT VPS BDES UDES ID0 ID1
DATA RANGE 00-3F 00-01 00-1F 00-03 00-01 00-01 00-01 00-01 00-01 00-01
STANDARD DATA 06 01 13 00 01 01 00 00 00 00
ITEM OSD HORIZONTAL POSITION NS COIL L SYSTEM TUNING WAIT TIMER HEADCLOG DETECT FTZ MUTE (0:OFF 1:ON) VPS (0:NO EXIST 1:EXIST) B DESTINATION (0:OTHERS 1:B) U DESTINATION (0:OTHERS 1:U) PAINTER M3A/M3C SELECT (0:M3A 1:M3C) NVM-ID1 (RESERVE)
4-4. A BOARD ADJUSTMENT 1. SUB COLOUR ADJUSTMENT 1) Recieve the PAL colour bar signal. 2) Check the pin4 of CN305 by oscilloscope. 3) Adjust the part of the right waveform to become the same level by service mode (VP28:Sub colour).
Same level
B-Out waveform
Fig.4-1
– 26 –
DEVICE
CXP85452 (µ-COM)
DEVICE
CXP85452 (µ-COM)
SECTION 5
TV BLOCK
DIAGRAMS 5-1. BLOCK DIAGRAMS CP101
UT101(VTR)
TU102(TV)
VIDEO
AM
AGC
SDA
SCL
FMG/POS
+33V
VIDEO
AM
AGC
SDA
SUB OUT
SCL
+33V
ANT
FMG/POS
MAIN OUT
IC301(1/2) Y/C/J
IC401 A/V SW D611
VIDEO(TV)
AUDIO(TV)
V OUT 34
VIDEO
BUFFER Q403
VIDEO(REC)
+3.3V
41 TU V 1 42 TU A 1 AUDIO(REC) BUFFER Q306 D101
OSD R OSD G OSD B YM/YS
FRGB
BLK
J401 R G B
CV(Y)IN CV OUT
CN305
R 43 TV IN
TEXT VIDEO
43 TU V 0 44 TU A 0
R OUT G OUT B OUT IK IN
22 23 24 21
B
G
9V
32 R2 IN 31 G2 IN 30 B2 IN
6 5 4 1 3
29 YS 2/YM 25 YS 1 28 R1 IN 27 G1 IN 26 B1 IN
27 AV V IN SSCP
BUFFER Q401
17 SSCP
23 AV V OUT
BLK R(C) 48 XTAL 1 X301 G 47 XTAL 2 SW B L IN
X302 25 AV A IN
L OUT R IN R OUT
BUFFER Q405
MUTE Q420
22 AV A OUT
BUFFER Q101
CN301(1/3) 1 2 H SYNC 1(REC) 3 FRGB 4 AUTO AGC 8 SCL 1 17 SDA 1 18 YM/YS 19 MODE 20 OSD B 21 OSD G 22 OSD R 23 B INT 24 TEXT VIDEO 26 SP AUDIO 25 PB A 27 PB V 28 FR LINE A 30 FR LINE V 32 VCR A 34 VCR V 35 SSCP
H SYNC 0(TV)
B
TO MA10 BOARD CN001
C TO MA10 BOARD CN001
BUFFER Q102
13 SCL 14 SDA
AUDIO AUDIO(PB) VIDEO(PB)
AUDIO(REC) VIDEO (REC)
TO JIG
GND SCL SDA B INT NC
BUFFER Q404
AUDIO (REC)
33 8 7 2 1 18
SP OUT VCR A IN VCR V IN FRONT A IN FRONT V IN VCR A OUT
17 VCR V OUT VIDEO(REC)
A(1/3)
1 2 3 4 5
(TUNER,A/V SW,Y/C/J) (Schematic diagram P.37 to 40) (15)
– 27 –
– 28 –
R G B IK 9V
A TO CVM BOARD CN703
CVM (RGB OUT,VM)
R AMP Q702,703
R OUT Q713,715
G AMP Q705,706
G OUT Q712,715
A TO A BOARD CN305
R
6 5 4 AUTO CUT OFF 1 3 9V R IN G IN B IN
B AMP Q708,709
B OUT Q701,717
KR
H2
G
KG
G
J701
IC1801 ROTATION OUT
IK BUFFER Q711
FV
CN706
G2
B
1
R IK DET Q704
9V
G IK DET Q707
NC/H2 200V
G4
KB
B
5 1
200V
(Schematic diagram P.41 to 43) CN703
CN007
R
V901 PICTURE TUBE
G2
G2
RV701 H STAT
B IK DET Q710
BIAS Q714 CN1801
2 IN 1-
OUT 1
1
OUT 2
7
1 2 3
3 IN 1+ 6 IN 2+8V
ROT(+) NC ROT(-)
ROTATION COIL
5 IN 2+
CN704 NS CORRECT VM +8V +135V
6 5 4 1
CN1703 +8V +135V(+B)
BUFFER Q1701
AMP Q1704,1705
BUFFER Q1706
BUFFER Q1707-Q1710
VM DRIVE Q1711,1712
3 2 1
VM NC E
VM COIL
CN801 VM SW Q304
IC301(2/2) Y/C/J
BUFFER Q301-Q303
VM OUT 15
4 REF 5 IN 7 BOOST
OUT 2 T801 FBT
VCC 3 C
200V
H DRIVE Q803
+B
H OUT Q802
T803 HDT
H1
11
5 +V IN 2 6 -V IN 2
OUT 2 7
4 +V IN 1 5 -V IN 1
FV
H2
PIN OUT Q801
L805 D507 +13V RECT D807
D804
+13V
G2 +13V
C
OUT 1 1
L802 +
R
GND L
GND D801 -13 RECT
L808 S801 H-CENT ABL IN
+B
18
IC801 PIN COMP EW
HV
D503 PUMP UP
+
135V (+B)
HP/PROTECT
1 5
CN803 200V H1
-13V
ABL -13V
3
CN301(2/3)
B
TO MA10 BOARD CN001
GND SCL SDA B INT NC
CN306 1 2 3 4 5
+B 9V
21inch model only NS OUT Q305
A(2/3)(DEFLECTION)
1 4 5 6
(Schematic diagram P.37 to 40) (15)
– 29 –
– 30 –
V DY
H DY
IC501 V OUT
VD+ 13 VD- 14
19
V DY+ V DYH DYH DYHDY+ H DY+
D506 200V RECT
V PROTECT Q501,502
HD
6 5 4 3 2 1
+B 9V VM OUT N.S
REG SW Q603
D622
TH601
IC602 SW REG CONTROL D602 AC-RECT
T604 SRT D616 +33V RECT
C SENSE 3 16 LINE G DRIVE 11
POWER SWITCHING Q605
IC609 9V REG
D635 +11V RECT
O
I
IC610 5V REG
4 V FB D627 +5V RECT
6 V REF P VCC 12
I
D621 RECT
O
A VCC 13 ZC 1
14 inch model
21 inch model CN606 PFC NC PFC
IC604 6V STBY REG
PH602 FEED BACK
3 2 1
4
1
3
2
IC611
D601 AC-RECT
1
R605 3
E
CN601 AC NUET
1
AC
5
IC606 SWITCHING REG
RY602
TO MA10 BOARD CN1703
O
I
2
T602 SRT
D 3
IC601 SW 5V REG
IC603 +6V REG
D625 +7V RECT
O
I
1 I
D605 +14V RECT
O 2 4
IC605 +13.2V REG CN602 CHECK CHECK
OCP/FB 1 S 2
F TO MA10 BOARD CN001
O 3 2
V IN 4 D610 AUDIO RECT
3 2 1
DGC
RY601 DGC DRIVE Q609
CN301(3/3) DGC SW VPS ON VCR PWR CRT PWR OVP
D609 MOTOR RECT
D606 VCC RECT 5 GND
CN603 DGC NC DGC
5 I
RY602
2 1
PH601 FEED BACK
TV DRIVE Q608
9 10 11 12 16
D612 +135V RECT
REG SW Q602
REG DRIVE Q604
4
1
3
2
2 O
I I
IC607 +135V RECT
RY DRIVE Q601
IC608 +9V REG 1 I
O 2 4
PROTECT DRIVE Q606
SW Q611,612
A(3/3) (POWER SUPPLY) – 31 –
(Schematic diagram P.37 to 40)
– 32 –
5-2. CIRCUIT BOARDS LOCATION
+33V STBY
Reference information IC609 9V REG
RESISTOR
CVM
O
STBY 9V
H10 IC610 5V REG O
STBY 5V
COIL CAPACITOR
MA10 IC604 STBY REG
A
O
5-3. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
: RN
METAL FILM
: RC : FPRD
SOLID NONFRAMMABLE CARBON
: FUSE : RW
NONFRAMMABLE FUSIBLE NONFRAMMABLE WIREWOUND
: RS : RB
NONFRAMMABLE METAL OXIDE NONFRAMMABLE CEMENT
: : LF-8L
ADJUSTMENT RESISTOR MICRO INDUCTOR
: TA : PS
TANTALUM STYROL
: PP : PT
POLYPROPYLENE MYLAR
: MPS : MPP
METALIZED POLYESTER METALIZED POLYPROPYLENE
: ALB : ALT
BIPOLAR HIGH TEMPERATURE
: ALR
HIGH RIPPLE
Note: • All capacitors are in µF unless otherwise noted. pF: µµF Capacitors without voltage indication are all 50V. • All resistors are in ohms. k = 1000 , M = 1000k
+7V
IC601 SW 5V REG
IC603 +6V REG O
1 I
1 3 5 6
O 2 4
IC605 13.2V REG
2
RY601
Y DRIVE Q601
CN302 D 5V SW 5V MTR 13.2V VCC(SP)
Device
• Indication of resistance, which does not have one for rating electrical power, is as follows.
G
TO MA10 BOARD CN1003
Pitch: 5 mm •
f
: nonflammable resistor.
• •
F ¢
: fusible resistor. : internal component.
Diode
4 5
7
: B + line : B – line.
9
: signal path.
0
P
Emitter
Collector Base
Emitter
Cathode Anode
Diode
Anode
(NC)
Cathode
• • •
O 2
3
8
IC608 +9V REG 1 I
Base Transistor
• All voltages are in V. • Circled numbers are waveform reference. V
Diode
Anode
(NC)
!¡
Diode Anode Diode
!™
Cathode
Common Anode
Cathode
Common Diode
Anode
Anode
Common Diode
Anode
Anode
Common Diode Cathode
Cathode
Common Diode
+9V
4
Diode
Cathode Anode Anode Cathode
Cathode Cathode Anode Anode
(Chip semiconductors that are not actually used are included.)
Note: The components identified by shading and mark B are critical for safety. Replace only with part nummber specified.
(15)
– 32 –
Circuit
Transistor
2
6
• Readings are taken with a 10M digital multimeter. • Voltage variations may be noted due to normal production tolerances.
V
Terminal name Collector
Common
• Readings are taken with a color-bar signal input.
+B(+135V)
*
Printed symbol
Cathode
otherwise noted. • E : earth-chassis.
D612 +135V RECT
1
Rating electrical power: 1/4W(CHIP:1/10W)
• p : panel designation and adjustment for repair. • All variable and adjustable resistors have characteristic curve B, unless
O 3
I
Terminal name of semiconductors in silk screen printed circuit ( )
– 33 –
Ver.1.6
Note: Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
A
– A BOARD – [TUNER, A/V SW, Y/C/J, HV DEFLECTION, POWER SUPPLY]
A BOARD
IC IC301 IC401 IC501 IC601 IC602 IC603 IC604 IC605 IC606 IC607 IC608 IC609 IC610 IC611 IC801
K-2 F-6 L-4 A-2 D-6 A-3 F-2 B-3 A-4 F-2 K-3 F-3 G-3 F-3 L-2
TRANSISTOR Q101 Q102 Q301 Q302 Q303 Q304 Q305 Q306 Q401 Q402 Q403 Q404 Q405 Q501 Q502 Q601 Q602 Q603 Q604 Q605 Q606 Q608 Q609 Q611 Q612 Q801 Q802 Q803
F-4 F-3 K-3 J-3 K-3 I-3 J-3 I-2 F-7 F-7 G-6 E-5 F-7 K-3 K-3 E-2 E-2 F-3 E-1 D-4 H-2 B-8 F-3 I-3 I-3 J-4 I-8 H-7
*
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
DIODE D101 D102 D103 D301 D302 D304 D305 D307 D308 D313
E-7 ––– ––– J-1 J-1 K-2 L-3 K-2 I-2 I-1
*
8 -
D314 D401 D402 D404 D405 D406 D407 D408 D409 D410 D411 D412 D413 D414 D501 D502 D503 D506 D507 D601 D602 D604 D605 D606 D607 D608 D609 D610 D611 D612 D613 D614 D615 D616 D617 D618 D619 D620 D621 D622 D623 D624 D625 D626 D627 D628 D629 D631 D632 D633 D634 D635 D636 D637 D638 D639 D801 D803 D804 D805 D807 D810 D811 D812
J-3 D-8 G-5 E-8 D-8 D-8 E-8 E-7 E-8 C-8 C-8 E-8 E-8 E-8 L-5 L-3 L-4 J-5 L-5 B-7 C-7 F-3 B-2 A-4 D-7 I-2 C-3 C-3 E-7 D-2 D-5 D-2 C-8 C-3 B-4 A-4 A-4 A-4 D-4 F-3 ––– E-1 A-2 C-4 D-3 E-1 E-2 D-5 C-8 K-3 E-2 D-3 I-3 F-2 G-3 F-2 K-6 I-4 H-5 L-3 H-6 J-9 H-9 G-7
3 3 3 -
: Refer to Terminal name of semiconductors
*
in silk screen printed circuit (see page 33).
NOTE: The circuit indicated as left contains high voltage of over 600 Vp-p. Care must be paid to prevent an electric shock in inspection or repairing.
– 34 –
– 35 –
– 35 –
– 36 –
1
3
2
4
5
6
7
8
10
9
11
12
15
14
13
A
TO MA10(1/3 CN100
C105 0.1 25V B:CHIP
L102 47µH C107 0.01 50V B:CHIP
D101 DAN202K-T-146
AUDIO(TV)
C109 R109 C108 10 0.01 100 50V 1/10W 50V B:CHIP :CHIP
R107 100 1/10W :CHIP
R159 100 1/10W :CHIP
C112 47 25V
R108 100 1/10W :CHIP C111 0.1 25V B:CHIP
C116 R160 1 100 16V 1/10W F:CHIP :CHIP L103 47µH
D611 HZT33-02TA
33V STBY
R410 47k D402 MTZJ-T-77-10B 1/10W :CHIP C405 47 4.0 25V
48 47 46 45 44 43 42 41 40 39 38 37
R614 1k 1/4W
VCR V IN VCR A IN
GND
SCL SDA ADR
AV A IN
R402 100 1/10W :CHIP
F
3.7
R441 100 1/10W :CHIP
R405 0 :CHIP
3 2 1 6
4
C418 1 16V F:CHIP
R434 100k 1/10W :CHIP
R435 2.2k 1/10W :CHIP
56mH
PFC 3 NC 2 PFC 1
R677 *
C631 0.01 50V B:CHIP
LINE
16
ZC
C407 1 16V F:CHIP
3 4
CSENSE V FB A VCC P VCC V REF G DRIVE P GND F CLAMP R GND
13.5
IC602 MC33364DR2 SW REG CONTROL
6 1
Q401 2SA1037K-T-146-R BUFFER
3.1 0.1 R612 3.3 1/2W :FPRD
D621 D1NL20U-TA2 RECT
D 5V GND(A) SW 5V GND(M)
GND
R(C)
GND
G
GND
B
GND
L.OUT
CV.OUT CV(Y).IN GND
GND
BLK
GND
NC
NC
SW
L.IN
R.OUT
R437 2.2k 1/10W :CHIP
IC609 PQ30RV11 9V REG
1.2
I
FB612
1 4
9 10
5 5
8 11+5V-RECT
2 6 C647 100 25V
7
R631
R643 C614 68k 0.47 1/4W 100V R673 470k 1/10W
R642 10k 1/4W
D639 MTZJ-T-77-8.2C C668 220 35V
R689 1k 1/10W :CHIP
R670 15k 1/10W
VC
I
O
6V STBY
G
C617 47 25V
C601 47 25V C655 1000 25V
C669 47 25V
D623 MA111-TX
1.2
R669
IC604 3.9k PQ30RV11 1/10W 6V REG :RN-CP
Q603 2SA1037K-T-146-QR REG SW 4.9 4.5 R686 1k 1/10W :CHIP
IC610 PQ30RV11 5V REG
C413 470 6.3V
R423 22k 1/10W :CHIP
1.2 C615 1.4 R678 22k 1/10W :CHIP
0.47 100V
D638 1SS119-25TD I G O R687 10k 1/10W :CHIP
O G
D635 D1NL20-TA RECT FB614 1.1UH
1 2 3 4
D637 MTZJ-T-77-4.3B
Q405 2SC2412K-T-146-R BUFFER
R617 1k 1/10W :CHIP
D1NL20U-TR2 11 8 RECT 10 9
R424 75 1/4W
D401 UDZS-TE17-9.1B
6.1
R436 82k 1/10W :CHIP
4.0
D604 1SS119-25TD
D627 D2S6MF S
D631 MA111-TX
A.GND
D408 MTZJ-T-77-9.1C
Q402 2SC2412K-T-146-R 6.7 MUTE
2.5
12
4 3
R449 47k 1/10W
6.8
D616
R624 2.2k 1/10W 1.5 :CHIP
R426 R448 5.6k 47k 1/10W 1/10W :CHIP
3.5
C609 100V 10
3
R422 5.6k 1/10W :CHIP C408 L401 0.001 100µH 50V B:CHIP :EL0606
4.5
T604
DUMPER
Q605 2SK2733 POWER SWITCHING 257
2
1
257
9 10 11 12 13
CN606 *
D613 UDZ-TE-17-16B
R657 100k 1/4W :RN
R419 C420 100 0.01 1/10W 50V :CHIP B:CHIP
D414 MTZJ-T-77-6.8A
R425 470k 1/10W :CHIP
FB611 1.1UH
C650 0.01 250V :PP
R647 4.7 1/4W :FPRD
D626 ERA22-08TP3
6.8 C628 0 0.001 50V 0.1 B:CHIP 4.3 C634 0 0.01 R623 50V 1k B:CHIP 1/10W 5.0 0 R676 150k 1/10W:CHIP 1.9
5
H
~
R628 47 1/10W :CHIP
6
C649 0.001 250V E
+
7
~ -
D602 D2SBA60F
R625 470 1/10W :CHIP
8
TH601
R632 22k 1/10W :CHIP
R
D413 MTZJ-T-77-6.8A
L403 10µH R408 220 1/10W :CHIP
9V STBY C616 33 450V
D407 MTZJ-T-77-6.8A
AUDIO
4.0
1.9
Q404 2SB709A-QRS-TX BUFFER
R414 R415 75 75 1/10W 1/10W :CHIP :CHIP
R420 100 1/10W D412 :CHIPMTZJ-T-77-6.8A C412 2.2 16V F:CHIP
R418 100 1/10W :CHIP C419 0.01 50V B:CHIP
VIDEO
D622 1SS119-25TD
G
VIDEO(REC)
R413 75 1/10W :CHIP
R428 22k 1/10W :CHIP
R443 R444 100 100 1/10W 1/10W :CHIP :CHIP
R650 47k 1/10W :CHIP
R432 2.2k 1/10W :CHIP
C421 0.01 50V B:CHIP R417 100 1/10W :CHIP
R429 330 1/10W :CHIP
C410 47 25V
R427 330 1/10W :CHIP
R442 220 1/10W :CHIP
R409 2.2k 1/10W R431 :CHIP C414 4.7k 1 1/10W :CHIP 16V F:CHIP
R407 1.5k 1/10W :CHIP
D411 MTZJ-T-77-6.2 D406 MTZJ-T-77-9.1C
4.0
3.9
AUDIO (REC)
C315 47 25V
R416 75 1/10W :CHIP
MTZJ-T-77-6.2
R446 470 1/10W 1.3 :CHIP
C406 1 16V R406 F:CHIP 220 1/10W :CHIP
4.0 3.9
R404 2.2k 1/10W :CHIP R403 220 1/10W :CHIP
4.0
3.9 0
4.3
4.4
R401 100 1/10W :CHIP
AUDIO (PB)
D404 MTZJ-T-77-6.8A
1.9
4.0
C311 47 25V
R412 AUDIO 100 D409 (PB) 1/10W :CHIP MTZJ-T-77-13 VIDEO (PB) D410
R445 Q403 470 2SC2412K-T-146-QR 1/4W BUFFER
13 14 15 16 17 18 19 20 21 22 23 24
VIDEO (PB)
AV V IN
VCR V OUT VCR A OUT
12 11 10 9
8
4.0 R439 5.6k 1/10W :CHIP
VCC
4
IC401 CXA1855Q-T6 A/V SW
7
C403 10 50V 4.0
C404 10 50V
2
V OUT SP OUT
5
R411 100 1/10W :CHIP
E
1
3
R438 5.6k 1/10W :CHIP
AV A OUT AV V OUT
C402 10 50V
BIAS
3
6
R111 1M 1/10W :CHIP
FRONT V IN FRONT A IN
25 26 27 28 29 30 31 32 33 34 35 36
2
4.0
TUA TUV TUA TUV
1
D
0 0 1 1
R447 100 1/10W :CHIP 4.0
C401 10 50V
R.IN
PB A PB V GND(A) FR LINE A GND FR V FR LINE V GND VCR A VCR V
TEXT VIDEO
DGC SW VPS ON VCR PWR CRT PWR VPULSE HPULSE NS CTL OVP SCL1 SDA1 YM/YS MODE OSD B OSD G OSD R BINT SP AUDIO
POS/NEG(VCR) POS/NEG(CTV) AUTO-AGC
5 7 8
C110 47 25V
L603 10µH :LHL08
VIDEO (REC) L402 4.7µH :EL0606
R120 Q102 22k 2SA1037K-T-146-QR R118 1/10W BUFFER 220 :CHIP 1/10W 9.4 C120 :CHIP (7.9) 0.047 R123 C122 15k 120p <1.7> 25V 1/10W C118 50V B:CHIP :CHIP 0.1 CH:CHIP R121 R119 25V 10k 220k B:CHIP 1/10W 1/10W R122 10k :CHIP :CHIP 1/10W R124 R125 :CHIP Q101 220 22k 9.3 2SA1037K-T-146-QR 1/10W 1/10W C121 BUFFER :CHIP :CHIP 0.047 50V R129 15k 1/10W C119 B:CHIP R126 0.1 (3.7)<1.7> :CHIP 220k R127 25V 10k B:CHIP 1/10W :CHIP 1/10W R128 C123 10k 120p :CHIP 1/10W 50V :CHIP CH:CHIP
VIDEO(REC)
4.0 4.0 4.0 3.9
L106 22µH :EL0606
AUDIO (REC)
AUDIO C114 68p 50V CH
C113 68p 50V CH R106 100 1/10W :CHIP
D103 UDZS-TE-17-5.6B
R110 6.8k 1/10W :CHIP
SSCP
8 C117 1 16V F:CHIP
R421 75 1/10W :CHIP
R105 100 1/10W :CHIP C102 10 50V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
L/ L' NEG/POS GND +5V AM QSS VIDEO NC
AS SCL SDA
VIDEO(TV)
7 C115 68p C103 50V 0.01 CH 50V B:CHIP
D102 UDZS-TE-17-5.6B
R101 6.8k 1/10W :CHIP
L107 4.7µH
J401 21P
STBY 5V
C
AGC
AS SCL SDA R103 100 1/10W :CHIP
GND 1
L108 4.7µH
C106 47 25V
D405 MTZJ-T-77-9.1C
CN604 :TAB
L105 4.7µH
CN301 35P
AUDIO(REC)
L101 JW(5)
R102 100 1/10W :CHIP L104 4.7µH C124 68p 50V CH
C104 47 25V
R151 0 :CHIP
C101 0.01 50V B:CHIP
R104 100 1/10W :CHIP
B
R152 0.01 50V B
AGC
MAIN OUT SUB OUT ATT SW BST +B 1 2
+33V
ANTIN
FRGB VM SW
TU102 * (FOR TV)
(FOR VTR)
+33V
TU101 *
L/ L' NEG/POS GND +5V AM QSS VIDEO NC
CP101
HSYNC 0(TV) HSYNC 1(REC)
TO MA10(1/3) BOARD CN001
C670 47 25V R688 33k 1/4W
VIDEO
G B
15
4
16
17
18
19
20
22
21
A BOARD
23
D 5V GND(A) SW 5V GND(M) MTR 13.2V VCC(SP) GND(SP)
J401 21P
CN302 7P :S-MICRO
ABOARD : IC501 LA7840L
1 2 3 4 5 6 7
CV.OUT CV(Y).IN GND
TO MA10(1/3) BOARD CN1003
TUNER,Y/C/J,HV DEFLECTION, POWER SUPPLY,AV SW
A
L603 10µH :LHL08
PUMP UP
THERMAL PROTECTION
– AMP
R
47 46 43
6 7
TV IN
(8.6)<7.6>
39
EW
ER-YIN
38
IREF
EYIN
37
41
EB-YIN
YUVSW
36
40
8 9 10
GND1
11
D305 1SS119-25TD
R309 10k D307 1SS119-25TD 1/10W :CHIP
B
R304 100 1/10W :CHIP
ABOARD : IC606 STR-F6654 V IN 4
4.2
13
SDA
VMOUT
SCL
33
SSCP
R2IN
32
HP/PROTECT
G2IN
30
19 20
AFCFIL IKIN
YS2/YM
R340 100k 1/10W
R341 100 1/4W
R322 470 1/10W
4.5 C323 0.01 1kR326 1/10W 50V F:CHIP
R325 470 1/10W
3
0 R331 4.7k 1kR329 1/10W 1/10W:CHIP
R328 470 1/10W
4
GOUT
G1IN
C319 0.1 25V F:CHIP
R330 100 1/10W :CHIP
YS1
O.V.P
LATCH
3 D
R4
DRIVE 2 S
REG.
TO JIG T.S.D
Comp1 – + Vth(1)
O.S.C
1 O.C.P/F.B
– + Vth(2)
Iconst R2 Rconst –
Comp2 C1
R1 5 GND
CN305 6P :S-MICRO
9V R G B
B
6 5 4 3 2 1
C339 0.1 25V F:CHIP
R335 100 1/4W
R343 100 1/4W R342 100 1/10W :CHIP
NC B.INT SDA SCL GND
Rconst +
0
9
5 4 3 2 1
R3 START
2
G
26
B1IN
CN304 5P :S-MICRO
1
4.5
8 BOUT
R 4.5
27
22
ROUT
R319 100 1/10W :CHIP
R321 100 1/10W :CHIP C320 0.01 C318 4.5 50V F:CHIP100 25V 4.5C322 0.01 1kR323 1/10W 50V F:CHIP
28
R1IN
7
1.8
R337 2.2k 1.6 1/10W :CHIP R338 2.2k 1.6 1/10W :CHIP
R313 3.3k 1/10W :CHIP
D301 MTZJ-T-77-5.6 D302 MTZJ-T-77-5.6
4.5
0.5 R336 2.2k 1/10W :CHIP
D401 UDZS-TE17-9.1B C326 1 50V
B2IN
3.9
PROTECT
C327 0.001 50V B:CHIP
6 HD
6
R318 100 1/10W :CHIP
34
VCC
31
REG
21
D304 MTZJ-T-77-9.1C
L305 JW(5)
4.4
R327 100 1/10W:CHIP 4.0 R332 33k 1/10W :CHIP
35
14
VD-
29
R424 75 1/4W
R317 100 :CHIP
4.3 1/10W
5
25
C321 0.1 25V F:CHIP
R365 R316 100 R320 1k 1/10W :CHIP 10k :CHIP 1/10W:CHIP5.7 L304 0.45µH 7.6 C317 10 C333 0.7 50V 0.01 50V B R324 100 1/10W :CHIP 0.4
VD+
15
D413 ZJ-T-77-6.8A
R315 100 1/10W :CHIP
4
16
R307 22k 1/10W :CHIP
17
R312 10k 1/10W:RN-CP 2.3 C309 22 3.6 50V R314 100 1/10W:CHIP 3.5
18
R419 C420 0.01 100 1/10W 50V :CHIP B:CHIP
R334 2.2k 1/10W :CHIP
GND2
COMBY IN
C355 0.01 50V B
C312 4.7 50V
4.7
R305 10k 1/10W :CHIP
G
VCR/FR IN
YCLAMP
12
0
VIDEO
42
ABLFIL
7
50V
C313 0.1 50V B:CHIP
2
R423 22k 1/10W :CHIP
COMBC IN
23
R418 00 1/10W :CHIP C419 0.01 50V B:CHIP
MONOUT
C307 0.22 50V
5.1 C310 10
6
PUMP UP OUT
(SECAM)
10
24
R421 75 1/10W :CHIP
0
Q306 2SC2412K-T-146-QR BUFFER
5
INVERTING INPUT
(APCFIL)
(VSAW)
C304 R303 18p 10k 50V 1/10W CH:CHIP :CHIP CH:CHIP
C306 (5.2) 220p <4.5> 50V
4
NON INV. INPUT
Y1 IN
C308 *
3
OUTPUT STAGE Vcc
XTAL3
R301 (1.6)<1.3> *
1
2
1
X302
0
Ver. OUTPUT
ABLIN
45
C421 0.01 50V B:CHIP R417 1/10W :CHIP
C302 2.8 R364 680 X301 18p 50V CH:CHIP 1/10W:CHIP
GND
XTAL2
44
48
1 2
C1 IN
3
C315 47 25V
R416 75 1/10W :CHIP
C413 470 6.3V
XTAL1
5.1
D404 MTZJ-T-77-6.8A
D407 MTZJ-T-77-6.8A
APED
4
C301 4.7 3.4 50V
0 0 0W D412 IPMTZJ-T-77-6.8A C412 2.2 16V F:CHIP
+
IC301 CXA2139S Y/C/J
5
C311 47 25V
Vcc
C325 47 25V
G
R G B 9V GND IK
TO CVM BOARD CN703
* MARK LIST
Ref No.
14inch model
21inch model
C303 C308 C801 C803 C806 C812 C813 C817 C818 C820 C821 C824 C827 CN606 D314 L802 L805 L808 Q305 R301 R306 R308 R311 R677 R801 R802 R805 R808 R810 R824 R830 R831 R832 R838 T801
— 0.033 50V B:CHIP 0.015 200V :PT 0.36 250V 100p 500V 0.022 200V 4700p 25V SL:CHIP 470p 50V 330p CH:CHIP 0.022 200V :PT 680p 2kV B 5600p 1.2kV 0.015 630V :PP — — 1-419-551-11 COIL,CHOKE(10MMH) COIL,CHOKE(1.5MMH) — 33k :CHIP — — — 3.3 10W 470k :RN-CP 27 2W :RS 82k :RN 82k 1/4W :RN — 110k :RN-CP 39k :RN-CP 75k :RN-CP 10k :RN-CP JW(15) NX-1912-M
10 0.47 16V B:CHIP 0.01 400V :PT 0.47 250V 100p 500V 0.033 250V 0.0022 50V SL:CHIP JW(5) 0.01 CH:CHIP 0.047 200V :PT 470p 2kV B 9100p 1.2kV 0.36 400V :PP 3P(3.3 10W) DAP202K-T-146 1-419-552-11 COIL,DRAM CORE COIL,WITH CORE 2SC2412K-T-146-R 2.2k :CHIP 10k :CHIP 10k :CHIP 10k :CHIP — 330k :RN-CP 47 2W :RS 33k :RN 56k 1/2W :RN 22k :RN-CP 100k :RN-CP 47k :RN-CP 510k :RN-CP 2.7k :RN-CP 100 2W :RS 1-453-314-11 —: Not used
B R D308 MTZJ-T-77-9.1C
D313 MTZJ-T-77-9.1C
VIDEO
C330 100 25V
CN306 6P
Q301 Q302 2SC2412K-T-146-Q BUFFER 2SC2412K-T-146-QR
L302 10µH :LAV35
R357 5.7 2.2k 1/10W :CHIP
L301 JW(5)
5.7
C501 R502
47k 0.1 220 1/10W 16V :CHIP
0.1
R520 47k 1/10W :CHIP R504 100k -0.21/10W :CHIP
R358 2.7k 1/10W :CHIP
5.0 5.7
R347 1k 0 1/10W :CHIP
Q501 UN2211-TX V-PROTECT
R503 22k
BUFFER
C502 1
1/10W 50V Q502 Q304 :CHIP 2SD601A-QRS-TX 2SC2412K-T-146-QR V-PROTECT VM SW
C328 10 16V
Q303 1 2SC2412K-T-146-QR 2 BUFFER
L303 R350 C329 R352 15k 50V 10µH 1/10W 470 68p :CHIP 1/10W CH:CHIP :LAV35 :CHIP R349 0 3.4 6.1 2.7 :CHIP R351 10k 1/10W :CHIP 2.7
3 4 5 6
5
2.1 R353 R354 470 470 1/10W 1/10W :CHIP :CHIP
A BOARD
R344 15k 1/10W
R346 10k 1/10W :CHIP
R355 470 1/10W :CHIP
19 20
R359 10k 1/10W :CHIP
+B NC GND 9V VM OUT N.S. CN801 6P :DY
1 2 3
H.DY+ H.DY+ H.DY-
*
MARK LIST
Ref No.
AEP/ESP model
FR model
UK model
TU101 TU102
BTF-EC402 BTF-EC402
BTF-EF412 BTF-EF412
BTF-EU602 BTF-EU602 —: Not used
TO CVM BOARD CN1705
A BOARD WAVEFORMS
1
PAL
1
SECAM
2
PAL
9 10
5 5
8 11+5V-RECT
2 6
R631 33 1/10W :CHIP
R658 10k 1/10W :CHIP
PH602 R641 TCET1103G 6.6 100 1/10W
0
1 2
I
R607 22k 1/10W :RN-CP
CN603 3P
2
1
Q609 2SC2412K-T-146-QR
D607 1SS119-25TD
K R660 220 1/10W :CHIP
R661 220 1/10W :CHIP
R674 18k 3W
T602 9
10
8
11
R636 47k 3W :RS
7 6
OCP/ FB
S D VIN GND 2
4
5
R685 22k 1/10W :CHIP
C620 470 25V
C667 100p 50V B
134.8 R681 4.7k 1/10W :CHIP
Q611 2SA1091R-TPE2 SW
IC605 SI-3120CA MOTOR REG
R680 150k 1/4W
16.0 C621 47 25V
MOTOR-RECT
15
C627 1000p 500V
PS604 FB605 1.1UH
3
16
R609 1k 3W :RS
C625 1000 50V
2
AUDIO-RECT
17 18 FB613 1.1UH
4
3
2
1
D619 AK04V0
D620 D1NL20U-TR2
PROTECT
R644 2.2k 1/10W :CHIP
C660 220 25V
C618 470p 50V B:CHIP
7.6
1.7
11 2.4
R827 10k 1/10W :CHIP
Q601 2SC2412K-T-146-QR RY-DRIVE
C818 *
R82 12 1/10 :RN-
Q802 BU4508DX-ON521 H-OUT
-0.2
0.2
4
1
14.2
3.1
3
2
13.2
C665 100 25V
R635 15k 1/10W :CHIP
135.5 13.3
R640 3.3k 1/10W :CHIP
PH601 TCET1103G FEED BACK
O
R639 1.8k 1/10W :CHIP
R645
R665 100k 1/2W C643 0.001 250V E
C648 0.1 25V B:CHIP
R666 2.2k 1/10W :CHIP
D634 3.9k C639 1/10W 0.0047 MTZJ-T-77-39 :RN-CP 50V Q602 2SC2412K-T-146-QR B:CHIP REG-SW 1.2
D628 1SS119-25TD SW
R620 15k 1/10W :CHIP
0.7
13.3 0.7
REG-DRIVE R653 5.6k 1/10W :RN-CP
0.6 D629
1SS119-25TD BIAS
Q604 2SC2412K-T-146-QR
BIAS
16
14 R835 2.2k 1/10W :CHIP
D812 MTZJ-T-77-9.1C
R629 1k 1/10W :CHIP
4.2
75.0
Q803 2SK2251-01 S
H-DRIVE
R841 6.8k 1/2W
IC607 SE135N-LF4
C830 330p 500V B
+135V-RECT
4.0
D624 MTZJ-T-77-3.9B
R633 15k 1/10W :CHIP
15
R638 100 1/4W :FPRD
R618 1k 1/10W :CHIP
R652 680 1/10W :CHIP
2
16.7
R663 220 1/4W
0.7
3
D618 D1NL20U-TR2
R831 *
R810 *
+B C632 100 160V
D612 RU4AM-T3
D614 1SS119-25TD R662
R646 680 1/10W :CHIP C641 470p 50V B
3.1 1.7
R833 100k 1/10W
1
C640 220p 50V B:CHIP
FB610 1.1UH
1.2
C809 R818 18k 0.1 25V 1/10W F:CHIP :RN-CP
0
C630 470p 2kV B
220 1/4W
R608 15k 1/10W :CHIP
P – 37 –
C622 47 25V
1
1 :
IC801 R809 33k NJM2903D 1/10W :CHIP PIN-COMP
C808 0.001 50V CH:CHIP
11.9
C804 47 25V
B
FB609 1.1UH
N
9V C645 47 25V
3
R816 33k 1/10W :RN-CP
R667 1.2k 1/10W :CHIP
FB607 1.1UH
RY601
R649 0.22 2W :RS
3 4
5.0
AUDIO VCC
+135V-RECT
R648 0.22 2W :RS
5 2
R801 *
D610 RN1Z-LF-B1
C636 470p 50V B:CHIP
C638 0.0015 2kV
0
C624 1000p 500V
C644 470p 50V B:CHIP
L601 10µH :LHL08
IC608 PQ09RD11 5V REG
2
R811 R812 2.2k 33k 1/10W 1/10W :CHIP :RN-CP
D609 RN1Z-LF-B1
FB603 1.1UH
R630 1M 1/4W
1.8 0.1 257 16.7
3
1/10W :CHIP
0
+12V-RECT
13
4
C657 47 25V
C666 100 16V
14 4
C623 220 50V
135.2 Q612 2SC2412K-T-146-QR R684 SW 10k 3.9
R601 220 1/10W :CHIP
R679 0.82 2W :RS
R683 680 1/4W :FPRD
R682 180k 1/4W
12
PS603 FB604 1.1UH
RECT
L604 1mH :LHL13
D605 EGP30DL-6085
R668 18k 3W R621 47 1/4W
D636 1SS133T-77
C663 100 25V C626 3300 25V
4.1
C662 22 25V
1
R627 0.47 1/4W :FPRD
C619 1000p 500V PS602 FB602 1.1UH
D606 D1NL20U-TR2
1
C635 0.01 500V E C646 D625 2200 RN3Z-LF014-302 25V +7V-RECT
FB606 FB601 PS601 1.1UH 1.1UH
D617 RG1C-LFC1 DUMPER
M
L602 47µH :LHL08 R675 1k 1/10W :CHIP
R626 4.7k 1/10W
14V
C642 0.01 630V :PP
IC606 STR-F6654-LF1357 SWITCHING REG
D633 1SS119-25TD
IC601 PQ05RD11 5V REG
R634 1k 1/10W :CHIP
R619 10k 1/10W :CHIP
0.7
R656 15k 1/10W :CHIP
D608 MTZJ-T-77-18B
FB620 1.1UH
C610 47 25V
0
PROTECT-DRIVE
R616 1k 1/4W
FB608 1.1UH
L
R613 330 1/10W :CHIP
Q606 2SC2412K-T-146-QR R611 15k 1/10W :CHIP
2 3
C664 100 25V
R622 10k 1/10W :CHIP
DGC-DRIVE 0
15.1
1
O
THP601 3
4
R671 220 1/10W :CHIP
G C612 2200 25V
RY602 4
5.0
R610 1.3k 1/10W :RN-CP
1.2 L605 56µH
5.5
DGC 3 NC 2 DGC 1
IC603 PQ30RV11 6V REG
R655 10k 1/10W :CHIP
2
C606 0.1 50V :MPS
7V
DGC
R605 0.1 1/2W :RF
C605 180 450V
C659 0.0047 250V F
IC611 µPC1093J-1-T
3
CN602 2P
R615 10k 1/10W :CHIP
3
AC-RECT
2.5
J
R602 39k 1/10W
5.6 1/4W
8
:CHIP R606 470k
4
D601 D4SB60L-F
C604 0.001 250V E
CHECK 2 CHECK 1
R669
IC604 3.9k PQ30RV11 1/10W 6V REG :RN-CP
7
R603 8.2M 1W
C617 47 25V
6
TO MA10(3/3)BOARD CN1702
6V STBY
G
C655 1000 25V
TV-DRIVE C603 0.001 250V E
O
C601 47 25V
7
R651 33 1/10W :CHIP R637 22 1/10W 4.3 :CHIP
R659 15k 1/10W :CHIP
0
VC
I
5
C661 0.1 50V B:CHIP
D632 1SS119-25TD
R670 15k 1/10W
1.2
1
C647 100 25V
D621 D1NL20U-TA2 RECT
Q608 2SC2412K-T-146-QR
C607 0.001 250V E
R689 1k 1/10W :CHIP
2
0.1 R612 3.3 1/2W :FPRD
D631 MA111-TX
15.1
RY603
FB612
C668 220 35V
FB614 1.1UH
1 4
D623 MA111-TX
D639 MTZJ-T-77-8.2C
10 9
D627 D2S6MF S
IC602 MC33364DR2 SW REG CONTROL
C602 0.001 250V E
R642 10k 1/4W
3
16 3.1
D615 1SS119-25TD 5 4 3 2 1
4 3
47 25V
1/10W
11 8
4
A.C NC NC NC AC NUET
D1NL20U-TR2 RECT D635 D1NL20-TA RECT
3
R624 2.2k 1/10W 1.5 :CHIP
13.5
9 10 11 12 13
CSENSE V FB A VCC P VCC V REF G DRIVE P GND F CLAMP R GND
CN601 5P :VH
I
DUMPER
Q605 2SK2733 POWER SWITCHING 257
MOTOR VCC
C631 0.01 50V B:CHIP
LINE
2 3 4 5 6 8
PFC 3 NC 2 PFC 1
ZC
SW 5V
56mH
R677 *
7
H
257
1
6.8 0 0.1 4.3 C634 0 0.01 R623 50V 1k B:CHIP 1/10W 5.0 0 R676 150k 1/10W:CHIP 1.9
C649 0.001 250V E
CN606 *
47 1/10W :CHIP
C628 0.001 50V B:CHIP
– 38 –
4
1 2 3
6
T803 :HDT
Q302 2SC2412K T 146 Q BUFFER 2SC2412K-T-146-QR
10µH :LAV35 C330 100 25V
BUFFER
R357 5.7 2.2k 1/10W :CHIP
L301 JW(5)
R520 47k 1/10W :CHIP R504 100k -0.21/10W :CHIP
R502
5.7
C501 47k 0.1 220 1/10W 16V :CHIP
0.1
R358 2.7k 1/10W :CHIP
5.0 5.7
R347 :CHIP
Q501 UN2211-TX V-PROTECT
R503 22k
5
2.1
R351 10k 1/10W :CHIP 2.7
C328 10 16V
1k 0 1/10W
Q303 1 2SC2412K-T-146-QR 2 BUFFER
L303 R350 C329 R352 15k 50V 10µH 1/10W 470 68p :CHIP 1/10W CH:CHIP :LAV35 R349 :CHIP 0 3.4 6.1 2.7 :CHIP
R353 R354 470 470 1/10W 1/10W :CHIP :CHIP
C502 1
1/10W 50V Q502 Q304 :CHIP 2SD601A-QRS-TX 2SC2412K-T-146-QR V-PROTECT VM SW
R346 10k 1/10W :CHIP
R355 470 1/10W :CHIP
19 20
-15V
OUT
VCC
REF
IN
+15V
BOOST
2
3
4
5
6
7
0.3
13.9
2.4
2.4
R655 10k 1/10W :CHIP R510 C505 R507 D502 100k 0.1 1k MTZJ-T-77-5.6 1/10W 50V 1/10W
PROTECT
0
17
1 1/10W :CHIP
Q606 2SC2412K-T-146-QR
22
IC501 LA7840L V-OUT
R306 *
0.7
R656 15k 1/10W :CHIP
L602 47µH :LHL08
IC608 PQ09RD11 5V REG
C510 0.01 50V F:CHIP
R518 10k 1/10W :CHIP
2
1
2
7
2
R814 0 :CHIP
R817 2.2k 1/10W :CHIP
8
1
1.2 7.6
C805 33 160V
C513 470 25V
R815 (JW7.5)
12
6
3
2.4
09 R818 18k 1 V 1/10W HIP :RN-CP
R824 *
D805 MTZJ-T-77-5.1C
5
4
11
R823 12k 1/10W :RN-CP
C813 *
R825 10k 1/10W :CHIP
R822 330 1/4W :FPRD
R827 10k 1/10W :CHIP
18 *
2
PAL
1.0Vp-p (H)
1.4Vp-p (H)
3
PAL
3
SECAM
1.4Vp-p (H)
1.0Vp-p (H)
R802 *
13
C810 500V B
C807 3.3 250V
C
-0.2 B
16
C824 *
C826 0.0047 200V :PT
C827 *
TO CVM BOARD J701
FV R803 0.68 1/2W :FPRD
G2
9
3.0Vp-p (H)
3.0Vp-p (H)
3.0Vp-p (H)
10
PAL
10
SECAM
11
13 R808 *
ABL
11 +24V
D804 GP08DPKG23
1.4Vp-p (H)
4.0Vp-p (H)
2.6Vp-p (H)
+13V
9
12
8
13
14
S801 -13V
2
7 C817 *
R
C819 1 250V
D810 ERC06-15S
7.9Vp-p (H)
TO CVM BOARD CN706
14
R805 *
R826 1k 2W :RS
L805 *
L802 *
C823 C821 220p 2kV * B
5
H-CENT
1
Q802 BU4508DX-ON5210 137 H-OUT
C812 *
1.4Vp-p (V)
8
7
1
Q801 S 2SK2251-01 PIN OUT
1.4Vp-p (V)
TO PICTURE TUBE HV
C802 470 25V R806 0.68 1/2W :FPRD
6
5
TO CVM BOARD CN707
10
R828 100k 1/10W :CHIP R831 *
SECAM
4
6
D801 RGP10GPKG23
1
14.3 0.001 7.6
R838 *
200V NC GND NC H1
+13V-RECT
L804 3.3mH
R821 6.8 1/4W :FPRD
C806 *
1.7
P
SECAM
3
2
L803 10mH :LHL10
D803 RGP10GPKG23
R830 *
R809 IC801 33k NJM2903D 1/10W :CHIP PIN-COMP
3.1 1.7
C803 *
2
-13V-RECT
R807 150 2W
1 2 3 4 5
+B
D507 RGP10GPKG23
L801 33µH
W P
1
HV
4
C801 *
R837 22k 1/10W :RN-CP
1 200V
C515 L501 10 47µH 250V :LHL08
C514 0.01 50V F:CHIP
9V
C804 47 25V
PAL
1.0Vp-p (H)
CN803 5P :S-MICRO
C
R519 1.2 1/4W
C511 220p 500V B
R515 4.7 2W :RS
C645 47 25V
811 R812 2k 33k 10W 1/10W HIP :RN-CP
1
C303 *
200V-RECT
C508 0.1 100V :PT
R514 R512 10k 220 1/10W 2W :CHIP :RS
R516 2.2 1/4W :FPRD
R517 4.7k 1/10W :CHIP
R675 1k 1/10W :CHIP
3
A BOARD WAVEFORMS
1.4Vp-p (H)
PUMPUP
C509 0.47 50V :MPS
R513 4.7k 1/10W :CHIP
4
—: Not used
TO CVM BOARD CN1705
CN801 6P :DY
T801 *
D506 RGP10GPKG23
D503 GP08DPKG23
C507 100 50V :HT
B
4.1
BTF-EU602
PROTECT
PROTECT-DRIVE
W P
BTF-EF412
Q305 * N/S OUT
D501 MTZJ-T-77-18B
:CHIP B:CHIP :CHIP
BTF-EC402
2 D314 *
0.4 C504 100 50V :HT
H.DY+ H.DY+ H.DYH.DYV.DYV.DY+
TU102
R308 *
R311 2.4 *
R508 1k -11.7 1/10W :CHIP
1 2 3 4 5 6
R359 10k 1/10W :CHIP
21 18
3 4 5 6
+B NC GND 9V VM OUT N.S.
D807 GP08DPKG23
10.0Vp-p (H)
H-CENT L808 *
C820 *
R832 *
2
DUMPER
C L
15
14.3Vp-p (H)
3.0Vp-p (H)
17
16
D811 RGP15GPKG23 DUMPER
15 E
B-SS10253-A-15 R842 10k 2W
75.0
H-DRIVE
R841 6.8k 1/2W C830 330p 500V B
4
1 2 3
R839 1 1W :RS
18
DY
C822 0.047 250V :MPS
6
T803 :HDT
3.2Vp-p (H)
171Vp-p (H)
Q803 2SK2251-01
1.2Vp-p (V)
20
19
R843 47 1/2W
54.0Vp-p (V)
No mark:PAL/SECAM ( ):PAL < >:SECAM
H.DY
H.DY V.DY
1190Vp-p (H)
V.DY
21
22
5.5Vp-p (V)
– 39 –
54.0Vp-p (V)
– 40 –
174Vp-p (H)
CVM BOARD WAVEFORMS
1
3
2
2.3Vp-p (H)
4
2.3Vp-p (H)
2.3Vp-p (H)
6
5
132Vp-p (H)
125Vp-p (H)
CVM BOARD : IC1801 M5216P VCC
OUT2
IN2–
IN2+
8
7
6
5
130Vp-p (H)
– 2 +
8
7
24.0Vp-p (H)
1
1
+ –
1
2
3
4
OUT1
IN1–
IN1+
VEE
1.4Vp-p (5msec)
3
2
4
5
6
7
8
10
9
11
A R1703 100 1/4W
(RGB OUT,VM)
R1719 1.2k 1/10W
R1722 4.7k 1/10W
R1728 150 1/4W
Q1709 BC327-25 BUFFER
C1703 470 10V R1729 3.3 1/4W
134.5
133.4
8V
8V
133.4
B
8
L1703 *
CN1705 6P
NS CORRECT VM +8V GND NC +135V
C
TO A BOARD CN1306
R1717 1.5k 1/10W :CHIP
130.1
D1704 0 :CHIP
129.7 R1705 D1707 1k Q1708 1SS355TE-17 1/10W 2SA933AS-RT
C1716 47 160V
C
C1717 47 25V
130.1
BUFFER
6 5 4 3 2 1
L1701 10µH :EL0606
2.0
R1710 2.2k 1/10W :CHIP
Q1701 2SC2412K-T-146-R BUFFER
1.4 C1701 100 16V
FB1701 0UH
C1704 0.01 50V B:CHIP
R1702 1k 1/10W :CHIP
R1713 4.7k 1/10W :CHIP
Q1706 2SC1740S-RT BUFFER C1702 *
5.7
Q1704 2SC2412K-T-146-R AMP
C1705 33p 50V CH:CHIP
R1701 F1701 220 6.3A 1/10W :CHIP
R1709 100 1/10W :CHIP D1703 1SS355TE-17
C1710 0.022 250V
5.0 2.0
L1704 470µH
R1714 R1711 56 4.7k 1/10W 1/10W :CHIP :CHIP R1715 150 1/10W :CHIP R1712 470 1/10W :CHIP
VCC VM
2.0 C1709 10
1.3
R1718 220 1/2W
C1711 0.022 250V
D1705 0 :CHIP Q1705 2SC2412K-T-146-R AMP
R1708 39k 1/4W C1712 0.01 250V
R1723 270k 1/10W
R1707 39k 1/4W
R1706 1k 1/10W
D1706 1SS355TE-17
1.4 50V
R1716 180 1/10W :CHIP
2.0 R1721 1.2k 1/10W
R1805 *
R1806 *
4.3
C1803 *
4
4.2
3
2
R1725 4.7k 1/10W
Q1711 2SA1837 BUFFER Q1712 2SC4793 BUFFER
CN1703 3P :S-MICRO
C1715 0.1 200V :MPS R1732 R1731 470 1W 12k :RS 3W
3 2 1
VM NC GND
5.5
5.5
Q1707 2SC1740S-RT 4.9 BUFFER Q1710 1.4 BC337-25 BUFFER
R1727 150 1/4W
R1801 *
1
50.2
R1726 22k 1/4W
R1724 270k 1/10W
C1706 470 10V
D
VCC VM
D1711 MTZJ-T-77-5.6
CVM
R1730 3.3 1/4W R1704 100 1/4W
0.8 C1713 47 25V
D1710 MTZJ-T-77-5.6
D1802 *
CN1801
–C VM
CVM
[RGB OUT,VM]
– CVM BOARD –
VIDEO section
C
F1701 220 6.3A 1/10W :CHIP
CN1306
100 1/10W :CHIP D1703 1SS355TE-17
R1714 R1711 56 4.7k 1/10W 1/10W :CHIP :CHIP R1715 150 1/10W :CHIP R1712 470 1/10W :CHIP
VCC VM
C1709 10
1/2W
1SS355TE 17
D1705 0 :CHIP Q1705 R1716 2SC2412K-T-146-R 180 AMP 1/10W
1.3
1/10W
1.4 50V
:CHIP
2.0 R1721 1.2k 1/10W
R1725 4.7k 1/10W R1727 150 1/4W
R1805 *
R1806 *
4.3
C1803 *
4.2
4
3
R1730 3.3 1/4W R1704 100 1/4W
0.8 C1713 47 25V
D1710 MTZJ-T-77-5.6
D1802 *
R1801 *
2
4.9 Q1710 BC337-25 BUFFER
1.4
C1706 470 10V
D
Q1707 2SC1740S-RT BUFFER
CN1801 *
1 1 2 3
IC1801 * ROTATION OUT
ROT (+) NC ROT (-) ROTATION
4.4
5 6 7 4.4 4.6
8
R1809 *
E
R1808 *
D1803 *
R1802 *
8V R1807 *
D1801 *
C1804 *
R1810 *
CVM BOARD CN707 5P :S-MICRO
F
1 2 3 4 5
R704 JW(12.5) L703 * J701
FV TO A BOARD T801(FBT)
G
GND
4 13
RV702 110M :RS
Be sure to connect the connector fo safety.
C708 0.0047 2kV E
7 6 11
7 10
L704 10µH
H R734 100 1/4W
4 R709 1k 1/10W
Q715 BF421-AMMO R OUT Q702 2SC2412K-T-146-R R AMP
9V
D702 1SS355TE-17 R706 220 1/10W 1.7 :CHIP C723 100p 50V CH
8.4
Q706 BF420-126 G AMP
1.5
G
R717 *
L706 10µH
3
C715 * C714 100 16V
C720 *
R710 470k 1/10W :CHIP R713 470k 1/10W
6.8 C716 *
9.3 7.8
R725 4.7k 1/10W :CHIP
Q711 2SC2412K-T-146-R IK BUFFER
C705 149.0 0.01 50V B:CHIP
150.9
C725 100p 50V CH
146.7 D717 1SS355TE-17 Q710 BF421-AMMO B IK DET
Q709 BF420-126 B AMP
D709 1SS355TE-17 Q708 2SC2412K-T-146-R B AMP
1.0
R719 47 1/10W :CHIP
R726 2.2k 1W
149.2
8.3
B
C702 * R750 1k 1/10W :CHIP
R723 1k 1/10W Q701 BF420-126 B OUT
R729 *
C712 * R730 47 1/10W :CHIP
R751 1k 1/10W :CHIP D703 1SS355TE-17
R737 680k 1/10W
R741 100 1/2W :RC
Q717 BF421-AMMO 8.7 B OUT
R727 220 1/10W 1.5 :CHIP
1.0
R721 100 1/4W :FPRD
148.4
C719 470p 50V B:CHIP
Q705 2SC2412K-T-146-R G AMP
C724 100p 50V CH
L702 * L705 *
L701 *
R736 22k 2W D718 1SS355TE-17 149.3
D707 1SS355TE-17
D705 1SS355TE-17
K
CV KR G1 G4 HV
G2
C710 0.1 250V :MPS
R701 470k 1/4W
D704 1SS355TE-17
R732 1M 1/10W
R733 100k 1/10W
TO A BOARD T801(FBT)
TO A BOARD T801(FBT) HV
Ref No.
14inch model
21inch model
C702 C703 C712 C715 C716 C720 C1702 C1803 C1804 CN1801 D1801 D1802 D1803 IC1801 L701 L702 L703 L705 L1703 R707 R717 R729 R1801 R1802 R1805 R1806 R1807 R1808 R1809 R1810
100p CH:CHIP 100p CH:CHIP 100p CH:CHIP — — — — — — — — — — — — — 27UH — — 560 :CHIP 560 :CHIP 560 :CHIP — — — — — — — —
150p CH:CHIP 150p CH:CHIP 150p CH:CHIP 68p CH:CHIP 68p CH:CHIP 68p CH:CHIP 22p CH:CHIP 0.022 B:CHIP 1 16V B:CHIP 3P UDZ-TE-1-10B UDZ-TE-1-10B UDZ-TE-1-10B M5216P 4.7UH 4.7UH 47UH 4.7UH 15UH 390 :CHIP 390 :CHIP 390 :CHIP 1K :CHIP 1K :CHIP 10K :CHIP 680K :CHIP 10K :CHIP 10K :CHIP 10K :CHIP 10K :CHIP —: Not used
B-SS10253-CVM-15
Schematic diagram
Schematic diagram
< A board
D721 1SS355TE-17
R716 220 1/10W :CHIP
C703 * R707 R708 47 * 1/10W :CHIP
151.2
Q714 2SA1037AK-T146-QR BIAS
TO A BOARD CN305
6 5 4 3 2 1
2
R715 100 1/4W :FPRD
D711 1SS355TE-17
R IN G IN B IN 9V GND AUTO CUTOFF
1
C704 0.01 50V B:CHIP
151.1
150.5
C718 470p 50V B:CHIP
1.2
R R746 1k 1/10W :CHIP
8.4
R712 2.2k 1W
Q712 BF420-126 G OUT
D719 1SS355TE-17
138.8
R722 1k 1/10W
R714 22k
D716 1SS355TE-17
138.0
C717 470p 50V B:CHIP
I
C713 0.01 50V B:CHIP
R705 2.2k 1W
D722 2W 1SS355TE-17 151.5
Q707 BF421-AMMO G IK DET
138.8
D708 1SS355TE-17
D710 1SS355TE-17
R703 100 1/4W :FPRD
G
Q716 BF421-AMMO G OUT
R C701 0.0047 400V :PT
Q713
Q703 BF420-126 R AMP
J
1
B
BF420-126 R OUT D706 1SS355TE-17 139.0
CN703 6P :S-MICRO
6
5
D714 1SS355TE-17 D715 1SS355TE-17
R702 22k 2W
H
1
137.1 Q704 D712 BF421-AMMO R IK DET 1SS355TE-17
GND
A34LRG70X (14inchi model) A51LPT60X (21inchi model)
8
9
CN706 CN702
V901 PICTURE TUBE
5
GND
H-STAT
KG KB G2
TO A BOARD CN803
R718 33k 1/2W :RC
3
1
200V NC GND NC NC/H2
– 41 –
CVM
board
,
* MARK LIST
– 42 –
NOTE: The circuit indicated as left contains high voltage of over 600 Vp-p. Care must be paid to prevent an electric shock in inspection or repairing.
– 43 –
– 44 –
TABLE OF CONTENTS Section
Title
Page
[ VIDEO SECTION] 1. GENERAL 1-1.
Section
5-1. 5-2. 5-3. • • • • 5-4.
INTERNAL VIEWS ............................................... 46
Top Cover Removal ................................................. VCR Block Assy Removal ...................................... H10 Board Removal ................................................ MA10 Board Removal ............................................ Service Position (MA10 Board) ..............................
Page
5. DIAGRAMS
2. DISASSEMBLY 2-1. 2-2. 2-3. 2-4. 2-5.
Title
47 47 47 47 47
Block Diagrams ....................................................... Circuit Boards Location .......................................... Printed Wiring Boards and Schematic Diagrams .... H10 Board ............................................................... MA10 (1/3) Board .................................................. MA10 (2/3) Board .................................................. MA10 (3/3) Board .................................................. Semiconductors .......................................................
55 59 59 60 65 69 73 75
6. EXPLODED VIEWS 3. CIRCUIT ADJUSTMENTS .................................... 48
6-3. 6-4. 6-5.
4. INTERFACE, IC PIN FUNCTION DESCRIPTION 4-1. 4-2. 4-3. 4-4. 4-5. 4-6. 4-7.
µ-COM Poart Function Description (MA10 Board IC001) .............................................. 51 System Control-Video Block Interface (MA10 Board IC402) .............................................. 52 System Control-Servo Peripheral Circuit Interface (MA10 Board IC402) .............................................. 52 System Control-Mechanism Block Interface (MA10 Board IC402) .............................................. 53 System Control-System Control Peripheral Circuit Interface (MA10 Board IC402) .............................................. 53 System Control-Audio Block Interface (MA10 Board IC402) .............................................. 53 Servo/System Control Port Function Description (MA10 Board IC402) .............................................. 54
Mechanism Deck Assembly (1) .............................. 79 Mechanism Deck Assembly (2) .............................. 80 Mechanism Deck Assembly (3) .............................. 81
7. ELECTRICAL PARTS LIST ...................................... 90
– 45 –
SECTION 1 GENERAL 1-1. INTERNAL VIEWS
Drum assembly DZH-89A-R x-xxx-xxx-xx
- Top Side -
ACE block assembly A-6775-791-A
FE head 1-500-471-11
Pinch press block assmbly A-6759-863-B
FL complete assembly A-6759-619-B
Reel table (S) 3-977-507-01
- Bottom Side -
Reel table (T) 3-977-508-01
M902 Capstan motor 1-698-971-11
Timing belt 3-977-510-01
M903 Cam motor assembly (Loading motor) X-3947-577-1
– 46 –
SECTION 2 DISASSEMBLY 2-1. TOP COVER REMOVAL
2-2. VCR BLOCK ASSY REMOVAL 1 Four screws (+BVTP 3 X 12)
4 screw (+BVTP 3 X 6) 3 Five screws (+BVTP 3 X 12) RP earth plate
2 Top cover 5 VCR BLOCK assembly
1 CN701
2 Two screws (+BVTP 3 X 12)
2-3. H10 BOARD REMOVAL
2-4. MA10 BOARD REMOVAL 1 Two Screws (+BVTP 3 X 12)
3 H holder
MA10 board 2 Five craws
4 H10 board
2-5. SERVICE POSITION (MA10 BOARD)
MA10 board
Chassis assmbry
– 47 –
SECTION 3 CIRCUIT ADJUSTMENTS Necessary items and indications for total adjustment of electric circuit of this unit will be described in this chapter.
[ SET-UP FOR ADJUSTMENT ] The video signal from the pattern generator is used as adjustment signal for electrical adjustment. This video signal should meet the requirement. Connect the oscilloscpe to the video input terminal
[ INSTRUMENTS TO BE USED ] 1) Color TV 2) Signal or dual trace type oscilloscope, band more than 30 MHz, delay, as provided. 3) Frequency counter (4 digits or more) 4) PAL pattern generater
on the MF 1 board and make sure that the amplitudes of sync signal of video signal, video portion and burst signal are flat at approximately 0.3, 0.7 and 0.3 V, respectively, and that the level ratio of the burst signal and “red siganl” are 0.30 : 0.66, Fig.3-2 shows video signals (color bars) used in adjusting the electrical adjustment.
5) Digital voltmeter 6) Audio level meter 7) Audio generator 8) Attenuator
White (approx. 100%)
9) Distortion meter 10) Alignment tape
Burst signal (To be flat)
Approx. 0.7V
Part code : H7099052H (MH-2)
Approx. 0.3V
Approx. 0.3V
Red
[ CONNECTION ]
Horizontal sync signal
Unless otherwise specified, connect and adjust the measurement equipment as follows.
Fig.3-2 Alignment Tape (MH-2)
Pattern generator
1
Time 10 minutes
Video signal Starir-step
Audio signal 6kHz
2 3
5 minutes 10 minutes
Color bar
3kHz 1kHz
4
3 minutes
RF sweep
-
[ SPECIFIED INPUT/OUTPUT LEVEL IMPEDANCE ] VIDEO INPUT
Input/Output terminal
VIDEO LINE OUT (75Ω)
Video input Fig.3-1
Pin jack Input signal : 1Vp-p, 75 , unbalanced Sync negative
AUDIO LINE IN
Pin jack Input level : -7.5dBs (0dBs=0.775Vrms) Input impedance : More than 47k
– 48 –
X’tal OSC CHECK
CARRIER DEVIATION CHECK
Mode Signal
PB Alignment tape, Stair step
Mode Signal
E-E Color bar
Measurement Point Measurement Equipment
MA10 board IC802 %ªpin(PAL) Oscilloscope
Measurement Point Measurement Equipment
MA10 board IC802 !•pin Spectrum Analyzer
Specified Value
500±200mVp-p
Specified Value
f2-f1=1.00±0.08MHz
Check: 1)Confirm the frequency is 4.433619MHz±100Hz(PAL).
Check: Confirm f2-f1=1.00±0.08MHz
2)Confirm the waveform amplitude is 500±200mVp-p.
Confirm f 1 =3.80±0.13MHz(PAL)
f2
f1
500 ± 200mVp-p 4.433619MHz ± 100Hz (PAL)
Fig.3-3 Fig.3-5
WHITE/DARK CLIP CHECK
SYNC AGC CHECK Mode
E-E
Mode
E-E
Signal Measurement Point
Color bar MA10 board Q830 emitter
Signal Measurement Point
Color bar MA10 board IC802 #¶pin
Measurement Equipment Specified Value
Oscilloscope 1.0±0.1Vp-p
Measurement Equipment Specified Value
Oscilloscope 190±20%(White), 55±20%(Dark)
Check: Confirm the waveform amplitude is 1.0±0.1Vp-p.
Preparation: Add 3.3k r esistor between IC802 $™pin and GND. Check: Taking the height from sync to white level as 100%, check white clip and dark clip.
1.0 ± 0.1Vp-p
White clip 100%
Fig.3-4
Dark clip
Fig.3-6
– 49 –
REC Y LEVEL CHECK
PB Y LEVEL CHECK
Mode
E-E(SP)
Signal Measurement Point
No signal MA10 board IC802 !•pin
Measurement Equipment Specified Value
Oscilloscope 260±70mVp-p(PAL)
Mode Signal
PB Color bar
Measurement Point Measurement Equipment
MA10 board Q830 emitter Oscilloscope
Specified Value
1.0±0.1Vp-p
Check: Confirm the Vp-p of the waneform is 1.0±0.1Vp-p.
Check: Confirm the Vp-p of the waveform is 220±70mVp-p.
1.0 ± 0.1Vp-p (Y Level)
260 ± 70mVp-p (PAL)
Fig.3-7
Fig.3-9
REC CHROMA CHECK
HALF H SHIFT CHECK
Mode
REC(SP)
Mode
EE
Signal Measurement Point
Color bar MA10 board IC802 !¢pin
Signal Measurement Point
No signal MA10 board IC802 !•pin
Measurement Equipment Specified Value
Oscilloscope 350±60mVp-p(PAL)
Measurement Equipment Specified Value
Spectrum Analyzer 8.2±2kHz
Check: Confirm the Vp-p of the waveform is 350±60mVp-p.
Check: Confirm the 1/2fH of the waveform is 8.2±2kHz. 1 2 fH
350 ± 60mVp-p (PAL)
Fig.3-8
Fig.3-10
– 50 –
SECTION 4 INTERFACE, IC PIN FUNCTION DESCRIPTION 4-1.
µ-COM PORT FUNCTION DESCRIPTION (MA10 BOARD IC001)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
Signal S SEL F S SEL R ST BIL DGC SW ST/ MONO – MAIN /SUB F MONO VM SW GP A GP B GP C ASURA CS SLAVE RESE J CLK FACT 1TU /2TU JUST CLOCK SIRCS HSYNC 1 HSYNC 0 SI SO SCK Vss B INT X TAL EXTAL RESET A MUTE CLK OS KEY2 KEY1 AFT1 AFT0 OVP G SW XLC EXLC OSD R OSD G OSD B I YS YM SDA1 SDA0 SCL1 SCL0 LED2 LED1 NS VOL MP NC Vdd Vss HPULSE VPULSE CRTPOW VCRPOW M SW SP MUTE
I/O I I I I – I – O O O I I I O O O I I I I I I I O O – I – – – O O I I I I I I – – – – – – – – O O O O O O O O – – – – I I O O I O
Function S-INPUT SELECT (FRONT) S-INPUT SELECT (REAR) TU STEREO MODE TU BILINGUAL MODE DGC ON/OFF CONTROL SET MODE STEREO/MONO TU MAIN/SUB CONTROL TU FOCE MONO CONTROL VM ON/OFF CONTROL "REC PON" SW A "REC PON" SW B "REC PON" SW C CHIP SELECT FOR ASURA RESET FOR ASURA JUST CLOCK DISABLE ("H" : DISAB) FACTORY MODE SET MODE 1TU/2TU JUST CLOCK DET INPUT REMOCON SIGNAL IN H SYNC DET INPUT (REC) H SYNC DET INPUT (TV) SIGNAL DATA INPUT SIGNAL DATA OUTPUT SIGNAL CLOCK OUTPUT BUS INT
AUDIO MUTE CHIP SELECT FOR RT CLOCK KEY SCAN 2 KEY SCAN 1 AFT DET 1 AFT DET 0 OVP DET "REC PON" SW
2
1 C BUS DATA FOR YCJ etc 2 1 C BUS DATA FOR NVM 2 1 C BUS CHECK FOR YCJ etc 2 1 C BUS CHECK FOR NVM POWER LED STBY LED NS COIL CONTROL (PWM) VOLUME CONTROL (PWM)
CRT POWER ON VCR POWER ON MAIN SW SPEAKER MUTE
– 51 –
4-2.
SYSTEM CONTROL-VIDEO BLOCK INTERFACE (MA10 BOARD IC402) TAPE Signal
TAPE
PB ·
REC ·
I/O
STOP
FF
REW
RF SW P (SW30)
IC402 1
O
*1
*1
*1
Q VD
IC402 4
O
L
L
L
L
L
*2
*3
*3
*3
*3
*3
L
L
V SYNC
IC402 ^§
I
*4
*4
*4
*5
*5
*5
*5
*5
*5
*5
*5
*5
*5
*1. *2. *3. *4. *5.
4-3.
THREADING UNTHREADING
PICTURE SEARCH
Pin No.
*1
*1
PB
PAUSE
SLOW
X2
CUE
REVIEW
REC
PAUSE
*1
*1
*1
*1
*1
*1
*1
*1
30Hz 50% duty pulse synchronizing with drum rotation. Normally “L” . “H” when the video signal is not detected. V period “H” pulse. “H” in the LP mode. Selected according to the recording mode. Selected according to the tape recording mode.
SYSTEM CONTROL-SERVO PERIPHERAL CIRCUIT INTERFACE (MA10 BOARD IC402) TAPE Signal
– 52 –
Pin No.
I/O
STOP
FF
REW
REC CTL
IC402 7
O
HI-Z
HI-Z
HI-Z
CAP STOP
IC402 #¢
O
TAPE
THREADING UNTHREADING HI-Z
HI-Z
PB ·
REC ·
PAUSE
SLOW
X2
CUE
REVIEW
REC
PAUSE
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
*1
HI-Z
L
*3
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
(O.D)
(O.D)
(O.D)
(O.D)
(O.D)
L
L
L (O.D)
PICTURE SEARCH
PB
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
(O.D)
(O.D)
(O.D)
(O.D)
(O.D)
STEP PLS
IC402 (ª
O
L
L
L
PB CTL
IC402 ^¶
I
H
*6
*6
DRUM PG
IC402 ^•
I
*4
*1
*1
*5
DRUM FG
IC402 ^ª
I
*4
*7
*7
*5
CAP FG
IC402 &º
I
H/L
*6
*6
*5
CAP DA
IC402 &£
O
*8
*8
*8
*8
DRUM DA
IC402 &¢
O
*10
*10
*10
*10
*10
*10
*10
*10
*10
*10
*10
*10
*10
CTL RESET
IC402 0
I/O
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
*11
HI-Z
HI-Z
HI-Z
HI-Z
HI-Z
*1. 30Hz 50% pulse. *2. Pulse in tape running. *3. Reverse logic pulse of STEP PLS. *4. “L” when drum rotation stops. *5. Unstable period pulse. *6. Pulse of Period proportionate to tape speed. *7. 360Hz pulse. *8. Pulse in tape running. *9. Approx. 2 msec. period “H” or “L” pulse. *10. Approx. 1.5 msec. period “H” or “L” pulse.
L
L
*2
L
L
L
L
L
*1
H/L
*2
*6
*6
*6
*1
H
*5
*1
*1
*1
*1
*1
*1
*1
*1
*5
*7
*7
*7
*7
*7
*7
*7
*7
*5
*6
H/L
*2
*6
*6
*6
*6
H/L
*8
*9
*8
*8
*9
*9
*9
*9
*8
4-4.
SYSTEM CONTROL-MECHANISM BLOCK INTERFACE (MA10 BOARD IC402) CASSETTE CASSETTE
Signal
Pin No.
CAM UN LOAD CAM LOAD MODE 1 MODE 2 MODE 3 MODE 4 C IN REC PRF T REEL FG S REEL FG
IC402 9 IC402 8 IC402 @™ IC402 @¡ IC402 @º IC402 !ª IC402 !¶ IC402 ^¢ IC402 ^£
T/S LED
IC402 #∞
CAP STOP
IC402 #¢
CAP RVS T SENS S SENS
IC402 &™ IC402 ^¡ IC402 ^™
– 53 –
*1. *2. *3. *4. *5. *6. *7.
TAPE
TAPE
PB ·
I/O EJECTED LOADING UNLOADING THREADING UNTHREADING STOP O O I I I I I I I O (O.D) O (O.D) O I I
PICTURE SEARCH
REC ·
FF
REW
PB
PAUSE
SLOW
X2
CUE
REVIEW
REC
PAUSE
HI-Z L H H L L L H/L H/L
H L L L L H *2 H/L H/L
L L L L L H *2 H/L H/L
H L *1 *1 *1 *1 *2 H/L *3
L L *1 *1 *1 *1 *2 H/L *3
*7 L H H H L *2 H/L H/L
*7 L H H L H *2 *3 *3
*7 L H H L H *2 *3 *3
*7 L H L L L *2 *3 *3
*7 L H L L L *2 H/L H/L
*7 L H L L L *2 *3 *3
*7 L H L L L *2 *3 *3
*7 L H L L L *2 *3 *3
*7 L L L H L *2 *3 *3
*7 L H L L L *2 *3 *3
*7 L H L L L *2 H/L H/L
*4
*4
*4
*4
*4
*4
*4
*4
*4
*4
*4
*4
*4
*4
*4
*4
L
L
L
H
H
L
H
H
H
L
*5
H
H
H
H
L
L *4 *4
*4 *4
*4 *4
H *6 *6
L *6 *6
H/L *6 *6
H *6 *6
L *6 *6
H *6 *6
H *6 *6
H/*5 *6 *6
H *6 *6
H *6 *6
L *6 *6
H *6 *6
H *6 *6
Uncertainty. “L” when the erasing protection tab is bent, “H” when not bent. Pulse of period proportionate to reel rotation speed. Apporx. 2 msec. period “H” pulse. Pulse in tape running. Normally “L”. 2 msec. period “H” pulse when tape top or tape end is detected. “L” when unloading to switchover. “H” when loading. “HI-Z” when CAM motor is stop.
4-5.
SYSTEM CONTROL-SYSTEM CONTROL PERIPHERAL CIRCUIT INTERFACE (MA10 BOARD IC402) Pin No.
I/O
ASURA RESET
Signal
IC402 $º
I
Normally "H"."L"when service interruption is detected or restored.
ASURA CS
IC402 $¢
I
Chip select signal from the timer microprocessor. V period “L” pulse.
S IN 0
IC402 $∞
I
Serial communication data from the timer microprocessor. V period “L” pulse.
S OUT 0
IC402 $§
O
Serial communication data to the timer microprocessor. V period “L” pulse.
S CLK
IC402 $¶
I
Serial communication clock with the timer microprocessor. V period “L” pulse.
4-6.
Function
SYSTEM CONTROL-AUDIO BLOCK INTERFACE (MA10 BOARD IC402) Sigmal
A MUTE
TAPE
TAPE
Pin No.
I/O
STOP
FF
REW
LOADING
UNLOADING
PB
PAUSE
SLOW
X2
CUE
REVIEW
REC
PAUSE
IC402 $ª
O (O.D)
L
L
L
L
L
*1
H
H
H
H
H
L
L
*1. 30Hz 50% duty pulse approximately 5 msec. delayed from RF SW P.
PB ·
PICTURE SEARCH
REC ·
4-7. Pin No.
– 54 –
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
SERVO/SYSTEM CONTROL PORT FUNCTION DESCRIPTION (MA10 BOARD IC402) Signal
I/O
RF SWP O – – – – QVD O CTLHYS HIGH O – – REC CTL O CAM LOAD O CAM UNLOAD O CTL RESET O – – – – – – – – – – – – C IN I – – MODE4 I MODE3 I MODE2 I MODE1 I LED6 O LED5 O LED4 O LED3 O – – SDA I/O – – SCL O – – – – GND O CAP STOP O T/S LED O GND O GND O GND O MP – ASURA RESET – Vss – XTAL – EXTAL – ASURA CS I S IN 0 I S OUT 0 O S CLK I GND O MUTE O POS I
Function RF SWITCHING PULSE
QUASI VD CTL CONTROL REC CTL SIGNAL CAM LOADING CAM UNLOADING CTL CONTROL
CASSETTE IN MD MODE DET MD MODE DET MD MODE DET MD MODE DET REC PON LED ON TIMER LED REC LED TIMER REC LED I2C BUS DATA FOR VIDEO/HiFi I2C BUS CLOCK FOR VIDEO/HiFi
T/S LED CONTROL
ASURA u-COM CHIP SELECT SERIAL DATA IN SERIAL DATA OUT SERIAL CLOCK AUDIO MUTE SWITCHING POSITION ADJ MODE
Pin No.
Signal
I/O
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
GND AVss AV ref AVdd SECAM/SVHS GND DEW GND – RF ENV T SENS S SENS SREEL FG TREEL FG GND VSYNC PB CTL DRM PG DRM FG CAP FG – CAP RVS CAP DA DRM DA JOG S VHS REC COUNT – – SO 1 SCK1 GND V PB CAP PWM – – – Vss Vdd – – – – – – – – – STEP PLS –
O – – – I O I O – I I I I I O I I I I I – O O O O O I – – O O O O O – – – – – – – – – – – – – – O –
Function
SVHS DET IN DEW SENSOR
VIDEO RF ENVELOPE DET TAPE TOP SENSOR TAPE END SENSOR S-REEL FG T-REEL FG V SYNC SIGNAL IN PB CTL SIGNAL DRUM PG DRUM FG CAPSTAN FG CAPSTAN REVERSE CAPSTAN D/A OUTPUT DRUM D/A OUTPUT JOG CONTROL S VHS DET OUT REC CTL COUNT
SERIAL DATA OUTPUT FOR RP AMP SERIAL CLOCK FOR RP AMP VIDEO PB MODE CAPSTAN
SECTION 5 DIAGRAMS
5-1. BLOCK DIAGRAMS
VIDEO BLOCK
CN702 GND RF SWP PB RF REC CUR
CHECK CONNECTOR
4 3 2 1
17 V PB
IC701 VIDEO REC/PB AMP
AMP Q803
AMP Q808
CN? SP1 S
3 2
PB VIDEO SW(REC)
5 6
PB VIDEO SW(REC)
4
REC VIDEO
PB RF
4
SP CH2
BUFFER Q701
22
VIDEO RF(PB) SP2 S
VIDEO RF (REC) REC RF 28
VIDEO RF(REC) SP COMON F 5
20 V SUB PB
JOG SW Q809
VIDEO RF (PB)
VIDEO RF(PB) 6
BUFFER Q812
Y OUT 42 C OUT 1 50 C OUT 2 48
Y OUT
1 C IN1 3 C IN2
C OUT 13
CLK 10
21 TRICK HIGH OUT
BUFFER Q801
15 V PB IN VIDEO RF(PB)
X801 4.43MHz
CLK BUFFER Q823
OSC 59
18 Y REC VIDEO RF(REC)
Y/C MIX Q815
14 C REC
OSC 60 C IN 52
C BUFFER Q825
LOGIC
66 C ROT IN 37 COMP SYNC
17 18 19 20
BUFFER Q821
REC/PB SIG 25
T1001 BIAS OSC TRANS
CLAMP IN 26 VIDEO(REC/PB)
45 PB IN C (SECAM)
C
TO A BOARD CN301
1 2 4 6 8 9 11
AUDIO(REC) VIDEO(PB)
VIDEO(PB)
BUFFER Q830
38 PB V OUT 79 NOR AU 77 PB A OUT
AUDIO(PB) AUDIO(PB)
AUDIO OUT(REC)
5
BIAS SW
6
1 RF SWP 66 V SYNC 60 RF ENV
A
SDA 0 28 SCL 0 30
64 SDA 63 SCL
4
33 QVD
BUFFER Q1804
A ERASE HEAD
GND(AV) GND(AV)
CTL HEAD X AUDIO ERASE HEAD
X AUDIO REC/PB HEAD
BIAS SW Q1002
IC1001 AUDIO HEAD SW 2
A MUTE 40
70 MUTE CTL
ME SECAM 55
65 ME SECAM
4 A-H SW 80 AUDIO(PB)
NT JUDGE 79
62 ACK OUT
AUDIO IN(PB)
7
83 V PB REC CTL
IC1801 SECAM CHROMA PROCESS
BUFFER Q1806
7
REC COUNT 77 3
CTL RESET 10 2
CLK IN
13 PB IN AUDIO
17 PB OUT
27 SYNC IN
REC IN 15
34 VCR REC OUT 35 VCR REC IN
IC404 CTL AMP
SECAM DET OUT 26
MODE
1
11 SECAM DET
SECAM SW Q1802
PB CTL 67 CTL HYS HIGH
SW Q402
5
12 SECAM ON
BUFFER Q1804
8
1.1MHz BELL
X430 16MHz E XTAL 43
16 PB H C IN 17 SP AUDIO
+V IN 1
1
7
OUT 2
-V IN 1
2
5
-V IN 2
OUT1
1
IC902 3.3V REG O
I
BELL SW Q1807,1808
58 OSC
S451 REC PRF
CN1003 D5V SW 5V MTR13.2V VCC(SP)
XTAL 42
21 4.43MHz BELL
14/21 FV1B model ONLY
OUT 1
IC405 CTL AMP
REC OUT 17
+3.3V BUFFER Q1804
FACT MODE
FOR JIG
50 SW POS
X
5 QVD
80 S01 81 SCK1
FULL ERASE HEAD
OSC Q1001
3
J101 V
1 2 3 4 5 6 7 8 9
CN1002 CTL(X) CTL(Y)
1 2 5
30 VCR V IN 73 VCR A IN
IC402(1/2) SYSTEM CONTROL
CN1004 V IN SW POSI FACT MODE V OUT V PB A OUT GND(A) A IN SP AUDI0
7 6
3 A HEAD REC 4 A HEAD PB
RF ENV 26
CN001(1/2) VCR V VCR A RF LINE V RF LINE A PB V PB A SP AUDIO
3 2 1
CN1001 GND(AC) NC FE HEAD
Y BUFFER Q824
Y IN 40 RF SWP COMP SYNC DATA COCK
7
5 Y IN
12 NT+2FSC
NT+2FSC 43
30 REC CUR SP CH1
IC801 1H DELAY
IC802 Y/C PROCESS
MA10(1/2)
1 3 5 6
SYSTEM CONTROL,Y/C PROCESS, VIDEO REC/PB AMP, SECAM CHROMA PROCESOR (Schematic diagram P.65 to 74)
G TO A BOARD CN302
1 (15)
– 55 –
D5.6V SW5V MTR 13.2V VCC(SP)
– 56 –
IC252 MEMORY 2 X OUT
CS
5
3 X IN
SIO
7
SCL
6
INVERTER Q008
SI 23
32 CLK CS
X251 32.768kHz
SDA 1
SP
GND(SP) GND(SP) SP L OUT
44 ASURA CS 40 ASURA RESET
ASURA CS 15 ASURA RST 16 SDA 1 47 SCL 1 49
IC1101 SIRCS
CAP PWM 64
3 20 SIRCS
2
4 SCL
DGC SW VPS ON VCR PWR CRT PWR OVP
IC003 RESET
D5V
3 2 1
I
O
30 RESET
D451 T/S LED
1 63 62 61 64
T/S LED 35
LED DRIVE Q451
SVRR
MUTE Q201
7
11 SP MUTE
VM SW V PULSE H PULSE NS
AUDIO 54 VOL 31 A MUTE
VOL 3 MUTE 10 TV A
5
CN403 SW 5V CAP RVS CAP FG REF CAP VS LIM MTR 13V GND(M) GND(A)
1 2 3 4 5 6 7 8 9
16 32 FRC
22 VS 21 LIMIT
1 2 3 FRC 4 FRC 5 6
U(+) U(-) V(+) V(-) W(-)
D5V
7 60 59 52
S SENS 62
V PLS
Q452 TAKE-UP END SENSOR
OUTPUT
Q453 SUPPLY END SENSOR
OUTPUT
MATRIX AGC DEFEAT AUTO DGC FRGB B INT MODE
AUDIO 18 FACT MODE
MUTE Q009
1
2 33 8 27 36
DRM FG 69 DRM PG 68
1 2 3 4 5
IC403(2/2) DRUM D/A AMP
DRM DA 74
6 -V IN 2
8 9
3 CAM 1 4 CAM 2
OUT2
CN401 GND(M) D FG D PG D VS MTR 12V
1 2 3 4 5
7
CN1301 1 2 7
LED DRIVE Q1301 LED
D1301-D1306
CAM LOAD CAM UNLOAD
CAM(-) 2 CAM(+) 10
CN002 GP A GP B D TMR
10 9 4
12 GP A 13 GP B 35 KEY 0
KEY 1 34
3 LED(D.TMR)
8
24 LED(D.MTR)
4 LED(TMR REC) 5 LED(REC) D5V 6 8 LED(STBY)
7 6 5 3
26 LED(TMR REC) 25 LED(REC)
MODE 4 MODE 3 MODE 2 MODE 1
19 20 21 22
9 10
EJECT GND(A)
FUNCTION KEY S1101-1109
H10(FUNCTION SW,LED)
IC901 TELE TEXT
INVERTER Q003
(Schematic diagram P.60) 17 TEXT BUSY RESET SW Q902
F1701 1 2
E TO A BOARD CA601
AC
5
AC NUET
BUFFER Q903
41 XTAL IN
S1701 T1701 1
43 SLAVE RESET V BLK 15
AC IN AC IN
AC IN
V PLS
V SYNC 37
BUFFER Q901,904
H SYNC 36 X901 42 XTAL OUT
MA10 (2/2) SYSTEM CONTROL,MAIN -COM, AUDIO,VCR SERVO
SCL 1
49 SCL
SDA 1
50 SDA
R 34 G 33 B 32 OSD BLK 35
D903
SDA 1 SCL 1
CORB 29 CVBS(TEXT) 23
1 2 3
1 2 3 4 5
CN401 MODE 4 MODE 3 MODE 2 MODE 1 GND(A)
1 2 3 4 5
M903 LOADING MOTOR
M
ROTARY SWITCH MECHA POSITION
27 26 25 24 20
DGC SW VPS ON VCR PWR CRT PWR OVP
F
TO A BOARD CN301
31 23 22 21
VM SW V PLS H PLS NS CTL
D
TO A BOARD CN301
B
TO A BOARD CN301
28 AUTO AGC 32 F RGB 12 B INT 16 MODE 34 H SYNC 0 33 H SYNC 1 13 OSD R 14 OSD G 15 OSDB 18 SDA 1 19 SCL 1 17 YM/YS 35 SSCP 10 TEXT VIDEO
(Schematic diagram P.65 to 74) (15)
– 57 –
– 58 –
HALL DEVICE
DRUM PG
CN001(2/2)
S REEL FG PH451
S REEL FG 63
2 1
CN404 CAM(-) CAM(+) CAM(+)
T REEL FG PH452
T REEL FG 64
S1301 EJECT
1 2 3
IC401 CAM MOTOR DRIVE
LED(STBY) 53
M
DRUM FG
10 TEXT RST 9 TEXT BUSY
M901 DRUM MOTOR
DRUM MOTOR
H SYNC 0 22 H SYNC 1(REC) 21
S1302 DIAL TIMER
HALL DRIVE
W(+)
CAPSTAN MOTOR
SP AUDIO
J1102 HEADPHONE
M902 CAPSTAN MOTOR
IC1 DRUM MOTOR DRIVE T SENS 61
IC201 AUDIO OUT 14 OUT
A1 B1 A2 B2 A3 B3 A4 B4 A5
CAP RVS 72 CAP FG 70
SDA 1 SCL 1
M
15
38 VPS INT
5 SDA DAVN
SCL 1
14 CAP STOP 34 STEP PLS 99
47 S CLK
SCK 25
IC005 VPS PROCESSOR
IC1 CAPSTAN MOTOR DRIVE
OUT 1 1
45 S IN 0
28 XTAL X001 8.38MHz
2 -V IN
CAPSTAN AM FG SENSOR
CAP FG AMP
IC403(1/2) CAP MOTOR D/A AMP CAP DA 73
46 S OUT 0
SO 24
I/O SW Q005,006
29 E XTAL
EXCEPT 14/21FV1E model
IC402(2/2) SYSTEM CONTROL
IC001 MAIN µ-COM
5-2. CIRCUIT BOARDS LOCATION
1
3
2
4
A
H10 CVM
(FUNCTION SW,LED)
B
H10
MA10
RESISTOR
5-3. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note: • All capacitors are in µF unless otherwise noted. pF: µµF Capacitors without voltage indication are all 50V. • All resistors are in ohms.
COIL CAPACITOR
k = 1000 , M = 1000k • Indication of resistance, which does not have one for rating electrical power, is as follows. Pitch: 5 mm Rating electrical power: 1/4W(CHIP:1/10W) • •
f F
: nonflammable resistor. : fusible resistor.
• •
¢ p
: internal component. : panel designation and adjustment for repair.
• All variable and adjustable resistors have characteristic curve B, unless otherwise noted. •
E
: RN
METAL FILM
: RC : FPRD
SOLID NONFRAMMABLE CARBON
: FUSE : RW
NONFRAMMABLE FUSIBLE NONFRAMMABLE WIREWOUND
: RS : RB
NONFRAMMABLE METAL OXIDE NONFRAMMABLE CEMENT
: : LF-8L
ADJUSTMENT RESISTOR MICRO INDUCTOR
: TA : PS : PP
TANTALUM STYROL POLYPROPYLENE
: PT : MPS
MYLAR METALIZED POLYESTER
: MPP : ALB
METALIZED POLYPROPYLENE BIPOLAR
: ALT : ALR
HIGH TEMPERATURE HIGH RIPPLE
: earth-chassis.
• Readings are taken with a color-bar signal input. • Readings are taken with a 10M digital multimeter.
1
• Voltage variations may be noted due to normal production tolerances. • All voltages are in V.
2
no mark : REC/PB ( ) : REC
3
< > : PB • Circled numbers are waveform reference.
•
V V
P
0 0 0.1 5.4 5.4 5.4 4.7 5.4
D1302 SLR-325VCT31 D1301 SLR-325VCT31 D1304 SLR-325VCT31
TIME REC
STBY
D
Terminal name of semiconductors in silk screen printed circuit ( ) Device
• •
C
Reference information
A
CN1301 10P 1 GP A 2 GP B LED(D.TMR) 3 4 LED(TMRREC) TO MA10(1/3) LED(REC) 5 6 BOARD D 5V CN002 7 D TMR LED (STBY) 8 9 EJECT GND (A) 10
*
Printed symbol
Terminal name Collector
Circuit
Transistor Base Transistor
Base Diode
Emitter
Collector Emitter
Cathode Anode Cathode
4
: B + line : B – line.
Diode
Anode
(NC)
Cathode
5
Diode
: signal path.
Anode
(NC)
Common
6 7
Diode Anode Diode
Cathode
Common Anode
Cathode
(Chip semiconductors that are not actually used are included.)
Ver.1.6
Note: Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
Note: The components identified by shading and mark B are critical for safety. Replace only with part nummber specified.
– 59 –
– 60 –
1 2 3 4 5 6 7 8 9 0
H10 3
4
5
[FUNCTION SW, LED]
6 – H10 BOARD –
H10
S1302 DIAL TIMER
C
(FUNCTION SW,LED)
A
B
0 0 0.1 5.4 5.4 5.4 4.7 5.4
D1302 SLR-325VCT31 D1301 SLR-325VCT31 D1304 SLR-325VCT31
R1308 10k :CHIP
TIMER REC
R1307 10k :CHIP
REC
STBY
S1301
R1301 68 1/4W
R1302 120 1/4W
EJECT
D1305 SLR-325DCT31
DIAL TIMER
D1303 D1306 SLR-325DCT31 SLR-325DCT31 * 0.1
Q1301 UN2215-QRS(TX) LED DRIVE
B-SS10253-H10-15
– 60 –
– 61 –
– MA10 BOARD –
MA10 (1/3)
SYSTEM CONTROL, MAIN MICON VCR SERVO, AUDIO
MA10 (2/3)
[Y/C PROCESS, SECAM CHROMA PROCESS]
MA10 (3/3)
[AC IN, VIDEO REC/PB AMP]
MA10 BOARD Q904 Q1001 Q1002 Q1801 Q1802 Q1804 Q1805 Q1806 Q1807 Q1808
IC IC001 IC002 IC003 IC005 IC201 IC252 IC401 IC402 IC403 IC404 IC405 IC701 IC801 IC802 IC901 IC902 IC1001 IC1101 IC1801
C-6 B-6 C-7 J-4 K-2 A-4 D-7 G-7 E-4 A-3 A-3 J-2 E-2 C-3 I-7 I-8 B-1 A-9 F-2
B-7 C-4 C-4 C-5 C-8 L-3 A-4 G-6 B-5 J-5 I-2 F-4 D-4 D-4 D-3 D-4 C-3 D-3 C-1 E-2 E-1 E-2 J-8 I-8 I-6
1 1 1 1 1 1 1 1 1
DIODE
TRANSISTOR Q003 Q005 Q006 Q008 Q009 Q201 Q402 Q451 Q452 Q453 Q701 Q801 Q803 Q808 Q809 Q812 Q815 Q821 Q822 Q824 Q825 Q830 Q901 Q902 Q903
J-8 A-2 B-2 G-3 H-2 H-2 G-2 H-2 G-3 G-3
*
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
D001 D002 D004 D005 D006 D007 D008 D009 D201 D202 D251 D252 D253 D254 D402 D403 D405 D406 D407 D432 D433 D451 D901 D902 D903 D904 D905 D1101 D1102 D1103 D1104 D1105 D1106 D1107 D1108 D1109 D1110
C-5 B-6 B-7 B-8 C-8 B-8 B-6 ––– A-7 A-7 A-4 B-4 B-4 B-4 E-4 E-7 G-1 B-5 B-5 F-7 H-7 F-5 H-8 J-7 J-7 J-7 I-8 J-8 J-9 J-9 J-9 J-9 B-5 B-5 A-5 A-5 B-9
*8 -
*: Refer to Terminal name of semiconductors in silk screen printed circuit (see page 59).
– 62 –
– 63 –
– 63 –
– 64 –
4
5
6
A
7
8 FOR JIG
CN1003 7P
D407 11ES2-TA1B
IC405 BA6305F-E2 CTL AMP
2.1
CN1004 9P
F4 F3
IC404 BA10393F-E2 CTL AMP
L401 JW(5)
Q402 UN2113-TX SW
4.9
1.9
B
R411 4.7k 1/10W :CHIP
1 2 3 4 5
F2 F1 F5 F6
SW5V
CN401 5P
1
TO A BOARD CN302
9 SP AUDIO 8 A IN 7 GND(A) 6 A OUT 5 V PB 4 V OUT 3 FACT MODE 2 SW POSI 1 V IN
GND (M) D FG D PG D VS MTR 12V
TO DRUM MOTOR
10
9
D 5.8V GND(A) SW 5V GND(M) MTR 13.2V VCC(SP) GND(SP)
3
2
1 2 3 4 5 6 7
1
D406 11ES2-TA1B
D405 11ES2-TA1B
8
5
6
7
8
4
3
2
1
4 R418 100k 1/10W :CHIP
2.0
R414 100k 1/10W :CHIP
2.4
C410 0.047 50V F:CHIP
2.3
C
C412 1 50V
C413 330p 50V CH:CHIP
R419 100k 1/10W :CHIP
R420 680k 1/10W :CHIP R429 4.7k 1/10W :CHIP
R436 560 1/10W :CHIP C421 100 10V
1 1.4
R416 220k 1/10W :CHIP
D
2
(1.7) <1.3>
R417 390k 1/10W :CHIP
R412 2.2k 1/10W :CHIP
3
R435 1k 1/10W :CHIP
1.2
TO MA10(2
C424 1 50V C422 0.0056 50V B:CHIP
R430 330 1/10W :CHIP
C414 47 10V
G1 G2 G3 G4 G5
GND(A) RF ENV RF SWP COMP SYNC DATA V CLOCK V
G7
NT JUDGE
G9 G10 G12 G13 G14 G15 G16
R437 4.7k 1/10W :CHIP
ME SECAM QVD SECAM DET ≠≠≠≠≠≠≠≠ SECAM ≠≠≠≠≠≠≠ ON
O2
S2
R415 100k 1/10W :CHIP
SCL SDA A MUTE
S0
7
S7
6
C409 47 10V
TO MA
SW 5V
S8
5
1.9
2.3
2.0
CTL(X) CTL(Y)
CN403 9P
JW401 7.5MM
A1 B1 A2 B2 A3 B3 A4 B4 A5
CTL CHECK SW 5V
C2 C3
GND(A) R402 R401 10k 10k 1/10W 1/10W :CHIP :CHIP
C402 47 10V
C425 0.1 25V F:CHIP
Q009 2SC2412K-T-146-QR MUTE
MTR 12V
R007 0 2.2k
D005 0.7 MTZJ-T-77-4.7B
C430 10p 50V CH:CHIP
C401 0.047 50V F:CHIP
4.9 4.9 * *
B1
I4 I3 I2 I1
DA CONVERTER (CAP & Drum)
R476 1k 1/10W G3 :CHIP R477 1k 1/10W :CHIP
I
IC401 LB1643 CAM MOTOR DRIVER
VCC 2
1
9 10
5
J
6
7
8
F3 0.1 R403 1k F4 2.8 1/10W 2.5 :CHIP R478 1k 1/10W :CHIP R479 4.7k 2.5 1/10W2.5 :CHIP
R480 R481 1k 1k 1/10W 1/10W :CHIP :CHIP
2.4
A1 A2 R445 47k 1/10W :CHIP C407 0.01 50V F:CHIP
L403 10µH
B1
0.3
4
4.8 6.3
3
0.3 2.5 2.5
2
CAM(+)
MTR GND CAM(-) CAM 1 CAM 2 VCL VCH V REF VCC 1
C3 C2
B2
F2
R447 22k 1/10W :CHIP
R450 15k 1/10W :CHIP
G7 G4
R449 22k 1/10W :CHIP
C406 0.01 50V F:CHIP
CN404 3P
G5
R448 12k 1/10W :CHIP
CXP87852-063Q-TL
VSYNC(2.3)<1.7> PB CTL 5 DRM PG 6 DRM FG CAP FG 7 NC 4.8 CAP RVS CAP DA DRM DA NC NC REC COUNT NC NT JUDGE SO1
R446 12k 1/10W :CHIP
D403 11ES2-TA1B
C405 47 16V
0 4.8
IC402 SYSTEM CONTROL
4.9 0.1 0.1 0.1
1.7
L4 L1
D1 D2 D3 D4
4.9 R484 1k 1/10W :CHIP
G16 G15 F5 2.5 2.5 A1 2.7 A2
R438 0 :CHIP R444 0 :CHIP F6
4.9 0
F1
R405 10k 1/10W :CHIP
C456 0.001 50V B:CHIP
PH452 GP3S120 T.REEL
1.2 1
G14 (2.3) <2.8>
PH451 GP3S120
R454 120 1/4W :FPRD
1.2
RF SWP
R404 10k 1/10W :CHIP
S19
R409 10k 1/10W :CHIPL3
R487 680 4.9 1/10W :CHIP
S4
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
G1
8
R428 10k 1/10W :RN-CP
R410 1k 1/10W :CHIP
:CHIP R465 680
C455 330 6.3V
Q451 2SC1815GR-TPE2 LED DRIVER
G10
4.91/10W :CHIP
7
G12
3
G9
R407 3.61.5k 3.61/10W
6
G13
SCL NC SDA NC LED(TMR REC) LED(REC) (0.3)<0> LED(D.TMR) NC MODE1 MODE2 MODE3 MODE4 NC C IN NC NC NC 5.2 0.2(SECAM) NC 0.2 SECAM ON 4.7(SECAM) (1.8)<1.4> SECAM DET CTL RESET CAM UNLOAD CAM LOAD REC CTL 2 NC CTLHYS HIGH QVD NC NC
5
C419 2.2 50V
B2
B3
B4
D402 1SS119-25TD
C432 0.1 25V R460 F:CHIP 2.2k 1/10W :CHIP
4
R427 180k 1/10W :CHIP
R426 2.2k 1/10W :CHIP
H
3
0.5
C418 0.027 50V :PT
2.6
R425 2.2k 1/10W :CHIP
2 2.5 2.5
1
NC AVSS AV ref AVDD ME SECAM 0.3 GND 4.2(SECAM) GND GND GND (0)<1.2> RF ENV T SENS S SENS SREEL FG TREEL FG 4 GND
D4 GL52
0.5
4
0.1
R408 10k 1/10W :CHIP
R406 1.5k 1/10W :CHIP
3
4.9
5
R470 470 1/10W :CHIP
2
6
0
7
R463
R443 1k 1/10W :CHIP
D 5V R452 39 T.S 1/4W :FPRD
R451 2.2k 1/10W :CHIP R453 39 1/4W :FPRD
81 SCK1 82 NC 83 V PB 84 CAP PWM 85 NC 86 Vss 87 NC 88 Vss 89 Vdd 90 Vdd 91 NC 92 NC 93 NC 94 NC 95 NC 96 NC 97 NC 98 NC 99 STEP PLS 100 NC
8
4.8
C417 22 25V
2.5 2.5
2.5
G
R424 10k 1/10W :RN-CP
2.8
R422 39k 1/10W :CHIP
C415 0.033 R423 50V :PT 1k 1/10W :CHIP
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
C416 L404 0.01 0 50V F:CHIP
R471 470 1/10W :CHIP R472 470 1/10W :CHIP R473 470 1/10W :CHIP
R461 33k 1/10W :CHIP
G2
1
R421 18k 1/10W :CHIP
R459 33k 1/10W :CHIP
D433 MTZJ-T-77-6.2B
SW POS 50 0.2 A MUTE 49 NC 48 1.1 SCLK 47 0.8 S OUT 0 46 0.8 S IN 0 45 4.4 ASURA CS 44 * EXTXL 43 2.6 XTAL 42 Vss 41 4.8 ASURA RESET 40 Vss 39 NC 38 NC 37 NC 36 0.5 T/S LED 35 CAP STOP 34 B3 NC 33 2.5 NC 32 NC 31
IC403 NJM062M-TE2 CAP/DRUM D/A AMP
C441 0.01 50V F:CHIP
H1 H2 H3 H4
R474 10k 1/10W :CHIP
C431 15p 50V CH:CHIP X430 16MHz
H5
F
I1
TO CAPSTAN M0T0R
K
GND(M)
C1
S.REEL 2 1
4
1 2
3
*
2.5
2
3
1
4
*
2
1
4.9
C457 0.001 50V B:CHIP
R432 10k 1/10W :CHIP
0.1
E
SW 5V CAP RVS CAP FG REF CAP VS LIM MTR 13V GND (M) GND (A)
Q452 RPT-37PBT32 TAKE-UP END SENSOR T.SENS D 5V
B4
CAM(-) 1 CAM(+) 2 CAM(+) 3 TO CAM M0TOR C1 TO MODE SW
MODE MODE MODE MODE
D4 D3 D2 D1
4 3 2 1 GND(A)
S401 R442 47k 1/10W :CHIP
C436 100 10V
R439 R440 R441 47k 47k 47k 1/10W 1/10W1/10W :CHIP :CHIP:CHIP
C408 0.1 25V B:CHIP
M
L402 10µH
R1115 1.8k 1/10W :CHIP
R1113 3.3k 1/10W :CHIP
S1105 S1102
S1103
S1104
S1106
S1107
S1109 S1101 C1107 0.0068 50V B:CHIP
C1106 0.01 50V B:CHIP
L1104 10µH
L1102 100µH :EL0405 R1106 75 1/10W :CHIP
TIMER REC
C1105 0.01 50V B:CHIP
STOP REC
INSEL
REW VOL-
PLAY VOL+
CH-
FWD CH+
R 1/ :
IC1 IC SBX SIR
PAUSE
T1 T2
R1128 330 1/10W :CHIP
C1101 0.001 50V B:CHIP C1102 0.001 50V B:CHIP
V
R1129 330 1/10W :CHIP
J1102
J1101 2P
HEAD PHONE A IN
V IN
P
LED(TMR REC) 7 LED(REC) 6 D 5V 5 D.TMR 4 LED(STBY) 3 EJECT 2 GND(A) 1
L1103 1µH
R1116 820 1/10W :CHIP
R1136 1.2k 1/10W :CHIP
L2
D1103 MTZJ-T-77-6.2 D1104 MTZJ-T-77-6.2
R1111 5.6k 1/10W :CHIP
R1103 680 1/10W :CHIP
L1 L3 L4
D1102 MTZJ-T-77-6.2
R1109 18k 1/10W :CHIP
R1112 820 1/10W :CHIP
S30
C1103 0.022 50V F:CHIP
S14
D1105 MTZJ-T-77-6.2
R1102 1.2k 1/10W :CHIP
D1107 MTZJ-T-77-6.2B
R1104 1.8k 1/10W :CHIP
K2
R1108 3.3k 1/10W :CHIP
D1106 MTZJ-T-77-6.2B
AUDIO
N3
N1 N2
AUDIO D1101 MTZJ-T-77-6.2
L1101 JW(5)
O
D432 MTZJ-T-77-6.2B GND(A)
R1110 5.6k 1/10W :CHIP
N
L431 10µH
C435 0.1 25V F:CHIP
GP A 10 GP B 9 LED(D.TMR) 8
L
TO H10 BOARD CN1301
– 65 –
C
10
9
11
12
16
17
18
19
20
3
TO MA10(2/3)BOARD
R218 220k 1/10W :CHIP
SW 5V
4
5
6
7
8
R206 330k 1/10W :CHIP
C208 4.7 50V
C214 220 25V
0.6
AUDIO
0
0
0 TEXT
BUSY
D007 1SS119 R901 4.7k 1/10W :CHIP
D006 MTZJ-T-77-5.1C
D005 0.7
C912 0.1 25V B:CHIP
R910 330 1/10W
R15
1.1 0.2 0.7 1.3
S0
MTZJ-T-77-4.7B
C906 0.1 25V B:CHIP
R902 100 1/10W :CHIP
C913 0.1 25V B:CHIP
D 5V R452 39 T.S.LED 1/4W :FPRD
R451 2.2k 1/10W :CHIP R453 39 1/4W :FPRD
IC901 SAA5563PS/M3/0189 TELE TEXT
R912 24k 1/10W :CHIP
4.3 R905 100 1/10W :CHIP L901 10µH :EL0606 C902 1 16V F:CHIP
0 1.6 1.6
3.3V
C903 33p 50V CH:CHIP
X901
R907 47k 1/10W :CHIP
0.6
L902 10µH :EL0606
-0.1 0.5
0
C901 0.001 50V B:CHIP
C904 33p 50V CH:CHIP
C907 1 16V F:CHIP
R906 4.7k 1/10W :CHIP
Q902 2SD601A-QRS-TX RESET SW
R30
R911 4.7k 1/10W :CHIP
Q903 2SD601A-QRS-TX BUFFER
N Q2 Q1
D902 MTZJ-T-77-3.9B
D903 DAN202K-T-146
C908 470 10V
R903 100 1/10W
Q6 Q5 Q4
R908 100 1/10W R915 150 1/10W
R914 100 1/10W
R918 100 1/4W :FPRD
R913 100 1/10W :CHIP
SECAM DET ≠≠≠≠≠≠≠≠ SECAM ≠≠≠≠≠≠≠ ON
R904 100 1/10W
4.3 :CHIP
D905 MTZJ-T-77-3.9B
6 7 8
ME SECAM QVD
R007 0 2.2k
3.3V
IC902 L78L33ABZ-AP 3.3V REG
R917 100 1/10W :CHIP
2
R212 1k 1/10W :CHIP
GND GND GND GND SDA GND SCL GND GND GND GND GND GND GND GND GND GND Vddp GND SLAVE RESET GND XTAL OUT 11 GND XTAL IN OSC GND GND Vddc GND Vssp V-BLK 12 V SYNC TEXT RESET TEXT BUSY 13 H SYNC GND OSD BLK GND R GND G GND B Vdda GND CVBS(TEXT) GND CVBS(AUTO CLOCK)CORB GND SYNC FILTER IREF NC
Q904 2SD601A-QRS-TX BUFFER
C909 100p 50V CH:CHIP R923 820 1/10W :CHIP
Q901 2SB709A-QRS-TX BUFFER 4.7
R916 150 1/10W C910 1 16V F:CHIP
C209 0.33 50V
D901 MTZJ-T-77-5.6 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
1
TEXT/OSD
R210 2.2k 1/10W :CHIP
S7 S8
R101 10k :CHIP
O G
AUDIO(PB)
Q009 2SC2412K-T-146-QR MUTE
I
D 5V
VIDEO(PB)
SCL SDA A MUTE
R220 4.7k 1/10W :CHIP
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
G9 G10 G12 G13 G14 G15 G16
0
C210 0.01 50V F:CHIP
AUDIO(REC) PB V PB A
C217 0.47 50V JW201 5MM
R219 220 1/10W :CHIP
9.6
3
NT JUDGE
R216 2.2 1/4W :FPRD C219 0.1 25V F:CHIP
C218 1000 25V
AUDIO
Q201 2SD601A-QRS-TX MUTE
4
G7
R211 10k 1/10W :CHIP
C220 1000 25V
5
GND(A) RF ENV RF SWP COMP SYNC VIDEO(REC) S0 DATA VCR V S2 CLOCK VCR A
N
0.2 4.9
9.6
C216 10 50V
9.6 C211 2.2 50V
TO MA10(2/3)BOARD G1 G2 G3 G4 G5
MA10(1/3)(SYSTEM CONTROL, MAIN µ-COM, VCR SERVO, A
AUDIO AMP.
PS201
R205 1k 1/10W :CHIP
R1
CTL(X) CTL(Y)
9 10 11 12 13 14 15
2 0.3
R15
1 0.1
D407 11ES2-TA1B
ST-BY SW MUTE GND NC VCC OUT GND
R204 100 1/4W :FPRD
TV(R) SW VOL MON OUT TV A NC SVRR GND
IC201 TDA7494 AUDIO OUT
CN1003 7P
1 2 3 4 5 6 7
D 5.8V GND(A) SW 5V GND(M) MTR 13.2V VCC(SP) GND(SP)
TO A BOARD CN302
06 -TA1B
R909 470 1/10W
L903 10µH :EL0606
R919 150 1/10W R920 470 1/10W :CHIP
C905 470 10V
0.1
R928 100k 1/10W
4.5
R922 3.3k 1/10W :CHIP
0.4 R925 47k
0.1
1/10W :CHIP R930 10k 1/10W
R927 R926 22k 1k 1/10W 1/10W :CHIP :CHIP
R921 1k 1/10W :CHIP
SW5V
R924 10k 1/10W :CHIP
Q3
1.7
D451 GL528V1
0.5
C455 330 6.3V
D904 MTZJ-T-77-5.6B
L904 JW(5)
AUDIO Q451 2SC1815GR-TPE2 LED DRIVER
S0
S4
R929 4.7k 1/10W
≠≠≠≠≠≠≠≠ TEXT ≠≠≠≠≠≠≠ RST
D.5V
D 5V L004 10µH
K2
4.5
L1 L3 L4
R017 100 1/10W :CHIP
R3 5
4
4.4 4.4
Q2
8
7
6
R050 *
R036 100 1/10W :CHIP
10 9
5.3
T1 T2
4 3 2
(1.4) R087 <1.0> *
C018 *
1.5
R093 *
R092 * C017 *
R089 * R090 *
C016 *
R088 * C019 *
R091 *
R083 *
(2.6)<0:PAL><5.1:SECAM>
MTZJ-T-77-6.2B C004 0.01 50V F:CHIP
D1109 MTZJ-T-77-6.2B
IC252 S-3510ACFJA-TB MEMORY VDD (0.6) <1.3> X OUT SIO (1.0) <1.8> X IN SCL GND
X251 0.9 32.768kHz
0.7
NC
8
D1108 MTZJ-T-77-6.2B
C259 C258 0.33F 0.1 5.5V 25V F:CHIP
R263 100 1/10W :CHIP R264 100 1/10W
CS
CLOCK
O
D252 MTZJ-T-77-6.2 R020 100 1/10W :CHIP
H2 H3 0.3
0.2
R006 470 1/10W :CHIP
G
C262 8p 50V CH:CHIP
0.2
1.2
:CHIP
Q7
R265 0 :CHIP
I
Q005 UN2213-TX I/O SW
C263 8p 50V CH:CHIP
D251 MTZJ-T-77-6.2
IC003 PST572C-T RESET IC
C260 100 10V
7
R049 4.7k 1/10W :CHIP
6
K1 K2
0.2
Q006 UN2213-TX I/O SW
D253 MTZJ-T-77-6.2 D254 MTZJ-T-77-6.2
L202 10µH
S1108
B-SS10253<
VOLTAGE no mark:REC/PB ( ):REC < >:PB LED(TMR REC) 7 LED(REC) 6 D 5V 5 D.TMR 4 LED(STBY) 3 EJECT 2 GND(A) 1
R095 * C010 *
L201 10µH
C009 0.001 R022 50V 4.7k B:CHIP C005 1/10W 0.001 50V B:CHIP :CHIP
Q008 UN2213-TX INVERTER
L003 *
R7
R100 10k 1/10W :CHIP
R026 0.2 1k 1/10W 4.9 :CHIP C002 22p 50V CH:CHIP
C033 *
C006 39p 50V CH:CHIP
R027 0 18k 1/10W :CHIP R040 5.210k 1/10W :CHIP 5.2
D001
C099 *
VPS
L001 18µH :EL0405
R025 10k 1/10W 5.2 :CHIP
VDD VDD NC CVBS IREF VCO PD2 NC PD1 TI
C007 39p 50V CH:CHIP
1
3.0 3.0 5.2
GND GND NC SCL SDA CSO VCS NC DAVN FHE
POWER
CN002 10P
TO H10 BOARD CN1301
– 66 –
1
5 6 7 1 2 3
R011 *
Q1 Q2
Q1
R030 220 1/10W :CHIP
L005 *
IC005 * VPS PROCESSOR
R044 4.7k 1/10W :CHIP
4.3 4.3 R038 100 4.2 1/10W :CHIP R037 100 4.2 1/10W :CHIP
R005 47k 1/10W :CHIP
GND(A)
EXCEPT FOR KV-14/21FV1E Q8
11 12 13 14 15 16 17 18 19 20
R041 4.7k 1/10W :CHIP R042 4.7k R039 1/10W 100 :CHIP 1/10W :CHIP
R085 1k 1/10W :CHIP
R018 470 1/10W :CHIP
X001 8.38MHz
R029 1k 1/10W :CHIP
IC1101 IC SBX1981-51 SIRCS
PAUSE
AUDIO
C008 0.47 16V F:CHIP
D002 MTZJ-T-77-6.2
R097 10k 1/10W :CHIP R043 4.7k 1/10W :CHIP
2
L2 4.9 0.8
0.2
4.3
4.8 -0.1
D009 1SS355TE-17
VDD
VCC OUT GND
C1104 0.1 25V F:CHIP
R015 R016 R075 1k 1k 1k 1/10W 1/10W 1/10W :CHIP :CHIP :CHIP
C001 30p 50V CH:CHIP
D1110 MTZJ-T-77-6.2
R1119 0 :CHIP
D1107 MTZJ-T-77-6.2B
D1106 MTZJ-T-77-6.2B
S1107
R1101 680 1/10W :CHIP
L2
R1116 820 1/10W :CHIP
R1136 1.2k 1/10W :CHIP
AUTO DGC
R15 K1
K5
D 5V
R014 1k 1/10W :CHIP
VSS A2 A1 A0
H1
4.9 R012 100 1/10W :CHIP
K5
R013 1k 1/10W :CHIP
SDA CLK
4.3 R045 R047 0 100 :CHIP 1/10W :CHIP
5
R004 1k 1/10W :CHIP
REC PRF
5.0
OVP 64 VPS ON 63 VCRPWR 62 CRTPWR 61 VPULSE 60 HPULSE 59 Vss 58 Vdd 57 Vdd 56 Vss 55 VOL 54 (std By)LED 53 NS 52
S451
L002 10µH :EL0607
3
O2
5.0
R468 47k 1/10W :CHIP
0 C021 R30 0.001 50V B:CHIP T1 C022 0.001 T2 50V B:CHIP R009 4.7 1k H4 1/10W 5.2 :CHIP H5 R065 1k 1/10W 5.3 :CHIP R064 1k 1/10W :CHIP
2.6 5.2
GND (A)
R068 R067 100 1/10W 100 1/10W :CHIP :CHIP
R076 4.7k 1/10W :CHIP
R457 33k 1/10W :CHIP
5.2 2.6
D 5V
0.2 1.7
R059 1k 1/10W 0 R21 :CHIP R060 0 R9 1k 1/10W :CHIP * R098 100 1/10W :CHIP
S.SENS
T.SENS
0.2
C458 0.001 50V B:CHIP
NC SCL0 SCL1 SDA0 SDA1 NC NC NC NC NC NC EXLC XLC VSP INT NC MODE KEY0 KEY1
H2 H3 H1
Q452 RPT-37PBT32 TAKE-UP END SENSOR
R084 220 1/10W :CHIP R048 680 R058 1/10W 390 :CHIP 1/10W :CHIP
20 SIRCS HSYNC1 21 (REC) 22 HSYNC0 23 SI 24 SO 25 SCK 26 Vss 27 BINT 28 XTAL 29 EXTAL 30 RESET 31 A MUTE 32 CLK CS
5.2
4
4.9
AGC DEFEAT 10 9 NC GND NC NC VM SW FRGB TEXT BUSY 5.2 IC001 TEXT RST CXP85452-233Q-TL SP MUTE 5.2 MAIN µ-COM GP A 0 GP B NC ASURA CS ASURA RST NC 8 FACT MODE NC
0.2 0.2
Q453 RPT-37PBT32 SUPPLY END SENSOR
4
1
2
D456 #
DGC SW
5
*
C460 0.001 50V B:CHIP
5.2 0
2
R456 47k 1/10W :CHIP
3
4.9
3
1
R057 1k 1/10W :CHIP R001 1k 1/10W 0 R10 :CHIP
6
3
7
1 2
R455 47k 1/10W :CHIP
2.5
C457 0.001 50V B:CHIP
R458 33k 1/10W :CHIP
*
4
8
T.REEL 2
2
C456 0.001 50V B:CHIP
PH452 GP3S120 1.2 1
S.REEL 1
R051 4.7k 1/10W :CHIP
IC002 M24C16-MN6T N.V.M
R046 100 1/10W :CHIP 4.3
JW001 5MM
R055 220 1/10W :CHIP
R056 220 1/10W :CHIP
19 18 17 16 15 14 13 12 11 10 9
1.2
I1 I2
PH451 GP3S120
R454 120 1/4W :FPRD
I4 I3
R077 47k 1/10W R054 :CHIP 1k 1/10W :CHIP
R052 10k 1/10W :CHIP
AUDIO(PB)
4
R078 10k 1/10W :CHIP
R096 6.8k 1/10W :CHIP
C013 10 50V
D008 MTZJ-T-77-6.2B
4.1
8
C024 220p 50V CH:CHIP
0
R25
D004 MTZJ-T-77-6.2
C015 100 10V C025 220p 50V CH:CHIP
VIDEO(PB)
C014 0.1 25V F:CHIP
R1
R17 R5 R4 R3 R2
R053 2.2k 1/10W :CHIP
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Q003 UN2211-TX INVERTER
0
GND(A)
GP A 10 GP B 9 LED(D.TMR) 8
5 W P
15
14
13
– 67 –
19
20
22
21
23
µ-COM, VCR SERVO, AUDIO) N3
CN251 3P :S-MICRO
SPEAKER
AUDIO N2
1 2 3
SP L OUT GND(SP) GND(SP)
N1 Q2 Q1
06 7k 0W IP
Q902 2SD601A-QRS-TX RESET SW
R907 47k 1/10W :CHIP
R918 100 1/4W :FPRD
0.6
Q904 2SD601A-QRS-TX BUFFER
C909 100p 50V CH:CHIP R923 820 1/10W :CHIP
Q901 2SB709A-QRS-TX BUFFER 4.7
R920 470 1/10W :CHIP
0.1
R924 10k 1/10W :CHIP R928 100k 1/10W
4.5
R922 3.3k 1/10W :CHIP
0.4 R925 47k
0.1
1/10W :CHIP R930 10k 1/10W
R927 R926 22k 1k 1/10W 1/10W :CHIP :CHIP
R921 1k 1/10W :CHIP
C911 0.001 50V B
MA10(1/3) BOARD
R929 4.7k 1/10W
S0
VIDEO(REC)
VIDEO(PB) AUDIO(PB)
IC002 4C16-MN6T N.V.M
3 2 1
DD
4
VSS A2 A1 A0
DA LK
AUDIO
1FV1E
L005 *
IC005 * S PROCESSOR
L A O S
VN E
C099 *
11 12 13 14 15 16 17 18 19 20
VDD VDD NC CVBS IREF VCO PD2 NC PD1 TI
D D
C033 *
L003 * R095 *
(1.4) R087 <1.0> *
C018 *
1.5
C010 *
R093 *
R092 * C017 *
R089 * R090 *
C016 *
R088 * C019 *
R091 *
R083 *
S0 S2
1 2 AUDIO(REC) 3 S30 4 5 S14 6 7 S7 8 S8 9 10 11 Q7 12 Q6 13 Q5 14 Q4 15 R7 16 Q3 17 Q2 18 Q1 19 Q8 20 R25 21 R2 22 R3 23 R4 24 R5 25 R17 26 R10 27 28 29 30 R21 31 R9 32 S19 33 S4 34 35
H2 1.2
H3
:CHIP
0.3
OCK
D252 MTZJ-T-77-6.2
D251 MTZJ-T-77-6.2
H1
R265 0 :CHIP
67 –
0.2
5
0.2
CS
FR/AEP/UK model
ESP model
C010 C016 C017 C018 C019 C033 C099 IC005 L003 L005 R011 R050 R083 R087 R088
0.033 25V B:CHIP 0.022 B:CHIP 150p CH:CHIP 0.047 25V B:CHIP 0.033 25V B:CHIP 100 10V 0.1 25V F:CHIP SDA5650X-GEG 10µH JW(5) 100 :CHIP 100 :CHIP 6.8k :CHIP 100k :CHIP 1.2M :CHIP
— — — — — — — — — — — — — — —
R089 R090 R091 R092 R093 R095
100 :CHIP 6.8k :CHIP 1.2M :CHIP 1M :CHIP 2.2k :CHIP 0 :CHIP
— — — — — — —: Not used
MA10(1/3) BOARD WAVEFORMS REC/PB
2
REC
4
Q006 UN2213-TX I/O SW
REC/PB
5
7
REC/PB
REC/PB
REC/PB
5.0Vp-p (16MHz)
6
5.0Vp-p (20msec)
3.8Vp-p (V)
D253 MTZJ-T-77-6.2 D254 MTZJ-T-77-6.2
3
4.4Vp-p (V)
5.0Vp-p (V) D201 MTZJ-T-77-6.2
8
R264 100 1/10W
C260 100 10V
D202 MTZJ-T-77-6.2
0.2
7
Q005 UN2213-TX I/O SW
6
VDD (0.6) <1.3> T SIO (1.0) <1.8> SCL
C259 C258 0.33F 0.1 5.5V 25V F:CHIP
R263 100 1/10W :CHIP
SP AUDIO B INT OSD R OSD G OSD B MODE YM/YS SDA1 SCL1 OVP NS CTL H PLS V PLS CRT PWR VCR PWR VPS ON DGC SW AUTO AGC NC NC VM SW F RGB H SYNC 1 H SYNC 0 SSCP
Ref No.
1
L201 10µH
IC252 0ACFJA-TB MEMORY
TEXT VIDEO
TO A BOARD CN301
(2.6)<0:PAL><5.1:SECAM>
VPS
CN001 35P
VCR V VCR A GND FR V FR LINE V GND FR V FR LINE A GND(A) PB V PB A
* MARK LIST
8
REC/PB
REC/PB
5.1Vp-p (1.6msec)
9
REC/PB
L202 10µH
4.9Vp-p (1.3msec)
5.0Vp-p(8.38MHz)
5.5Vp-p (H)
B-SS10253-MA10-P1-15
10
REC/PB
5.3Vp-p (V)
13
11
REC/PB
2.5Vp-p (50nsec)
REC/PB
3.5Vp-p (H)
– 68 –
12
REC/PB
6.0Vp-p (V)
1
3
2
A
CN1001 3P :S-MICRO
GND(AV) 3 NC 2 FE HEAD 1 FULL ERASE HEAD
CN1002 7P
B CTL HEAD
SECAM 2.4Vp-p (H)
11
REC:0.4Vp-p(H) PB:0.3Vp-p(H)
REC:0.3Vp-p(H) PB:0.2Vp-p (H)
13
REC:0.3Vp-p(H) PB:0.2Vp-p (H)
15
PAL
PB
15
12
SECAM
18
REC
SECAM 1.0Vp-p (H)
PAL
REC:0.4Vp-p(H) PB:0.3Vp-p (H)
14
REC/PB
0.4Vp-p (H)
16
REC:0.3Vp-p(H) PB:0.2Vp-p (H)
SECAM 0.38Vp-p (H)
20
REC/PB
REC/PB
0.54Vp-p (4.43MHz)
0.4Vp-p(H)
REC:0.46Vp-p(H) PB:0.3Vp-p (H)
17
SECAM
10
REC
SECAM 0.4Vp-p (H)
19
REC/PB
SECAM 0.38Vp-p (H)
REC/PB
SECAM 3.8Vp-p (H)
H C1803 *
C
R1804 *
C
I
J
28
27 SYNC-IN
REC/PB
4.0Vp-p (H)
G
1
2
R1809 *
K
C1815
9
PAL 2.3Vp-p (H)
SECAM
PB
3.8Vp-p (H)
REC/PB
12
8
VIDEO RF
0.3
REC
F
0.5
8
SECAM 1.0Vp-p (H)
PAL
PAL 1.2Vp-p(H)
0.5Vp-p (H)
REC
11
7
REC
VIDEO RF
E
TIMING SYNC GATE
6
REC/PB
SECAM 0.25Vp-p (H)
9
PAL 0.32Vp-p (H)
0.28p-p (H)
PB
7
PB
D
CLK IN
0.32Vp-p (H)
5
C
MODE
REC
SECAM 0.36Vp-p (H)
AUDIO ERASE HEAD
1.9
4
PB
5
PB
PAL 0.32Vp-p (H)
0.3Vp-p (H)
3
2
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4.7
PB
AEP/UK/ESP model
0.01 B:CHIP 150p CH:CHIP 220p CH:CHIP 0.0047 B:CHIP 0,0047 B:CHIP 0.1 25V B:CHIP 0.01 B:CHIP 0.01 B:CHIP 0.001 B:CHIP 0.01 F:CHIP 0.01 F:CHIP 47 10V 82p CH:CHIP 680p CH:CHIP 0.01 B:CHIP 220p CH:CHIP 0.1 25V B:CHIP 0.022 B:CHIP 10 0.47 1 0.01 B:CHIP 2.2 100p CH:CHIP LA7337 6.8µH 22µH 68µH 27µH JW(5) 47µH 2SA1162-YG-TE85L UN211L-TX 2SC2712-YG-TE85L 2SC2712-YG-TE85L 2SC2712-YG-TE85L UN2213-TX UN2111-TX 47k :CHIP 8.2k :CHIP 9.1k :CHIP 20k :CHIP 27k :CHIP 8.2k :CHIP 1k :CHIP 39k :CHIP 27k :CHIP 470 :CHIP 5.6k :CHIP 22k :CHIP 15k :CHIP 10k :CHIP 47k :CHIP 2.7k :CHIP 47k :CHIP 47k :CHIP 10k :CHIP 0 :CHIP 27k :CHIP 39k :CHIP 10k :CHIP 0 :CHIP
R1812 *
2
REC
FR model
C1801 C1802 C1803 C1804 C1805 C1806 C1807 C1808 C1809 C1810 C1811 C1812 C1813 C1814 C1815 C1816 C1817 C1818 C1819 C1820 C1821 C1822 C1824 C1826 IC1801 L1801 L1802 L1803 L1804 L1805 L1806 Q1801 Q1802 Q1804 Q1805 Q1806 Q1807 Q1808 R1801 R1802 R1803 R1804 R1805 R1806 R1807 R1808 R1809 R1810 R1811 R1812 R1813 R1814 R1815 R1816 R1817 R1818 R1819 R1820 R1821 R1822 R1823 R1831
AUDIO(P
R1816 *
1
Ref No.
AUDIO REC/PB HEAD
IC1801 *
MA10(2/3) BOARD WAVEFORMS
* MARK LIST
7 6 5 4 3 2 AERASE HEAD 1
SECAM CHROMA PROSESS
MA10(2/3) BOARD
CTL(X) CTL(Y) GND(AV) A HEAD PB A HEAD REC GND(AV)
TO RP BLOCK
C18 *
L
PB RF 5V REC RF RF SWP GND COMP SYNC RF ENV
M
R831 0 :CHIP
DATA CLOCK TO MA10(3/3) BOARD
—: Not used Schematic diagram
< MA10(1/3) board
Schematic diagram
– 69 –
MA10(2/3) board ,
– 70
3
2
4
5
6
7
8
10
9
11
12
13
01 CRO
VOLTAGE no mark:REC/PB ( ):REC < >:PB
D(AV) 3 NC 2 HEAD 1
SW5V
02
TL(X) TL(Y) D(AV) AD PB D REC D(AV)
7 6 5 4 3 2 HEAD 1
AUDIO(PB)
Q1001 2SD879-AA OSC C1014 0.01 50V F:CHIP
(4.4) <4.8>
IC1001 BA7755AF-E2 AUDIO HEAD SW 1
1 2
AUDIO(PB)
C1017 4.7 50V
2.2
75
76
2.2
77
0
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
30
29
R847
(2.5)<3.1>
C829 16V F:CHIP
(2.2)<0>
26
25 2.2
(1.1)<1.5>
28
18 19 20 21 22 23
VIDEO RF(REC)
*
(3.6) BUFFER
R1823 *
R1808 <3.2> *
L1803 *
C1810 *
C1812 * C1811 *
VIDEO(REC) C1820 *
R1814 *
R1815 *
L1805 *
Q1806 * BUFFER
C1817 *
(3.1) <3.5> C1819 *
R1821 *
C832 1 16V F:CHIP
AGC FILTER
Q1804 C1813 *
3.8 R1820 *
Q821 2SD601A-QRS-TX BUFFER
2.6
PB-H
REC-IN
2.4
PB-IN
(3.0)<2.4>
2.4
REG
C1826 *
L1804 *
(0.4) <4.7>
LIM EXC
PB-OUT
REC-OUT
4.3
2.3
2.2
IREF1
VREF1
R1818 *
R1817 *
3.1
R1803 * IREF4
2.1
VREF4
2.3
R1805 *
R1802 *
2.4
2.4 2.4
Vcc
4.3MHz BELL 1.1MHz BELL
GND
R1831 2.4 * C1814 *
C1816 *
C1815 *
R1812 *
24
(1.8) C1801 * <4.7>
C1802 * C1805 *
2.7
2.8
S/H C1 1.1MHz OFFSET
0.1
DET C
S/H C2 4.3MHz OFFSET
0.1
BGP TIMING
4.7
(4.0) <4.5>
3.7
0.4
AFC SECAM-DET FILTER OUT
0.5 SYNC-IN
0.3 TIMING SYNC GATE
CLK IN
MODE
1.9
4.7
IC1801 *
SECAM CHROMA PROSESS
R1816 *
C1818 *
1.1MHZ BELL
R845 2.2k 1/10W :CHIP
C1808 * 3.9
CLAMP
(0.3) <3.0>
SW
R839 1.8k 1/10W :CHIP
P
2.4
C1809 * R1810 *
(0.2) <3.3>
YC MIX
R1813 *
R1807 *
Q1807 *
R1822 * L1806 *
R831 0 :CHIP
ATA OCK
3)
– 71 –
BPF
MAIN CONV
14
(0.3) <4.7>
RF 5V
– 70 –
ACC AMP
C868 22p 50V CH:CHIP
R1806 *
R
SW
5.2
P
13
R1811 *
C1822 *
Q1808 (4.7) * <0.1>
* SECAM SW
Y-GND
12
* BUFFER
R838 4.7k 1/10W :CHIP
CLAMP
11
Q1805
Q1802
R1819 *
19 17
10
2.4
AGC DET
9
15
R
C1821 *
8
4.7
18
16
DETAIL ENH
R1809 *
17
N.L. EMPH
7
18
MAIN EMPH
6
19
L1802 *
SW5V
CLAMP
5
20
16
C1807 *
FM AGC
4
21
DOUBLE LIMIT
22
VIDEO (REC/PB) C1806 *
MOO
23
P
24
6
R
3
2
25
R1801 *
5 SUB LPF
26
C819 390p 50V CH:CHIP C825 180p 50V CH:CHIP
VOLTAGE: SECAM REC/PB mode
N
27
S
28
3.1
C818 0 0.01 50V F:CHIP C822 1.6 22 25V C815 L809 33p 100µH (0)<1.4> 50V CH:CHIP (2.4)<1.8>
MAIN PEAKING EMPH
L1801 *
4
TRICK HIGH OUT
2.4
R815 470 1/4W :FPRD
DEMOO
C1824 *
1
Q1801 * BUFFER
R1804 * C1804 *
R837 10k 1/10W :CHIP
2.1 REC EQ
(B model only)
R840 100 1/10W :CHIP
N
VIDEO RF Y
2 3
S
R843 470 1/10W :CHIP L815 120µH
2.4
2.5
(3.1)<1.4> C879 220p 50V CH:CHIP
P
C817 0.01 50V F:CHIP
R875 0 :CHIP
S-EQ
R829 4.7k 1/10W :CHIP
4.3MHZ BELL
(0)<3.0> C816 0.022 50V B:CHIP
VIDEO RF(PB) 0
Q809 UN2213-TX JOG SW
PB-EQ
VIDEO RF(PB)
C807 10p 50V CH:CHIP
R
(JOG) R811 470 1/10W :CHIP
R803 2.2k 1/10W :CHIP
R801 470 1/10W :CHIP
1 R
C1013 (2.7) 1 16V F:CHIP <2.2> C823 2.3 1 50V VIDEO RF C C820 1.8 0.047 25V B:CHIP Q815 1.5 2SD601A-QRS-TX R841 C824 (2.5)<0> 2.1 Y/C MIX 3.6k 1/10W :CHIP 0.01 50V F:CHIP C1006 0.01 50V B:CHIP
R835 470 1/10W :CHIP
C-LPF
1.0
C1009 10 50V
P
R827 100 1/10W :CHIP
R1008 270 1/10W :CHIP
P
R814 470 1/10W :CHIP
2.2
C1010 2.3 0.01 50V :PT R1011 R1015 10k 6.8k R1010 1/10W 1/10W2.2 330k :CHIP :CHIP 1/10W :CHIP R1012 2.2 820 1/10W :CHIP
KIL
L804 39µH :EL0405
SW5V
R824 1k 1/10W :CHIP
<0>
C1008 4.7 50V
BAL TC1
(2.4) <0.8>
R813 820 1/10W :CHIP
2.5
L808 15µH
R820 22k 1/10W :CHIP
1.5
L1003
3.1
C813 100p 50V CH:CHIP
ACC DET
Q803 2SD601A-QRS-TX AMP
PB
Q801 2SD601A-QRS-TX BUFFER
ALC DET
(3.1) <4.7>
A-VCC
1.7 2.1
AUDIO(PB)
PB-LP,SP
Q808 2SD601A-QRS-TX AMP
PB
2.3
Q812 2SD601A-QRS-TX BUFFER
3.1
LINE AMP
R823 1k 1/10W :CHIP
REC
R819 22k C808 1/10W 0.01 :CHIP 50V F:CHIP
L803 39µH :EL0405
EQ AMP
C804 39p 50V CH:CHIP
(0.8)<4.8>
C102 1 50V
MUTE
R810 470 1/10W :CHIP
(2.4) <4.0>
C801 0.15 16V B:CHIP
R882 39k 1/10W :CHIP
C1012 0.0015 AUDIO(REC) 50V B:CHIP (0.8)
AUTO BIAS
C1007 47 10V R881 47k 1/10W :CHIP
C1019 47 10V
A-GND
REC
R1013 2.2 18k 1/10W(2.2) :CHIP<0.1>
REC
C1011 0.0015 50V B:CHIP
REC-EP,LP PB-EP
Q1002 2SD601A-QRS-TX BIAS SW
VIDEO RF(PB)
L801 470µH
REC AMP
R1014 1.2k 1/10W 2.2 :CHIP
R1007 18k 1/10W :CHIP
VIDEO RF(REC)
LOCK
RF WP ND YNC ENV
A-H.SW
8
78
80
L1001 100µH
79
3
C1001 0.047 100V :PT
2.2
27
4
(3.9) <0.3>
(3.9) <0.3> 2.2
2
5
5
4
R1002 180 1/4W :FPRD
1
C1015 1 50V
C1004 47 10V
7 6
R1019 10k 1/10W :CHIP
0
7
R1006 12k 1/10W :CHIP
6
R1005 47 1/4W :FPRD
2
T1001
3
R1001 JW(5)
R1018 3.3k 1/10W :CHIP
4.1
R1004 3.9k 1/10W :CHIP
R1023 5.6k 1/10W :CHIP
C834
(1.0)<4.8>
C1003 0.01 50V B:CHIP
R1017 5.6k 1/4W :FPRD
8
R1003 1 1/4W
L 4
C1016 47 16V
VIDEO (REC/PB)1
(1.1)<4.8> C1002 0.01 50V F:CHIP
C1803 *
SW5V
R1020 100 1/10W :CHIP
AUDIO(REC)
12
15
14
13
16
17
18
19
20
21
22
MA10(2/3)(Y/C PROCESS,SECAM CHROMA PROCESS) GND(A) PB A
AUDIO(PB) SW 5V GND(A) PB V
TO MA10(1/3) BOARD
VIDEO(PB)
SW5V R871 2.2k 1/10W :CHIP
AUDIO(REC)
0.9(1.5 SECAM)<0.9 SECAM>
64 63 62
ACK OUT
61
KIL DET
60 2.0 X801
59
2
VDD
3
C-IN2 NT+2FSC
4
NC
4FSC
11
5
Y-IN
CLK
10
NC
VCO
9
RD
8
47
C-OUT
Q825 2SD601A-QRS-TX C BUFFER
15
12
13
0.4
C865 0.90.1 25V B:CHIP
2.1 R869 1k 1/10W :CHIP
2.0
C853 0.1 25V F:CHIP
7
Y-OUT
Q824 2SB709A-QRS-TX Y BUFFER
C854 1 50V
C867 9.0 0.01 50V B:CHIP
14
1.4
46 45
14
1
1.3
R867 C862 C860 2.2k 1 1/10W 0.01 50V 16V :CHIP F:CHIP 2.2 F:CHIP
L812 22µH
C848 0.01 50V F:CHIP
VSS
C866 0.1 25V B:CHIP
44 40 (0)<3.0>
39
38 3.0
37 0.6
1.8
36
35
34 3.0
33 (2.2)<0>
43
0.4 R860 3.3k 1/10W :CHIP
41
42
1.9
IC802 LA71514M-MPB PROCESSOR
C845 Y/C 1 16V F:CHIP
R850 4.7k 1/10W :CHIP C843 100 10V
VIDEO(PB)
32 R804 2.2k 1/10W :CHIP
0.2
31
30 R847 0 :CHIP
4.1
29 (2.2)<0>
C835 0.1 25V F:CHIP C837 47 10V
C834 0.1 25V F:CHIP
VIDEO (REC/PB)1
C829 16V F:CHIP
(2.5)<3.1>
28
27
26
25 2.2
3.1
60/50
CLAMP
(1.1)<1.5>
YNR
C832 1 16V F:CHIP
18 19 20 22
R
VIDEO AMP
R849 0 :CHIP
L811 22µH
LPF
23
P
QV/QH INS
Y-VCC
SYNC SEP
C841 10 50V
NT+2FSC
1/2
21
R
R
9
8
Q830 2SB709A-QRS-TX BUFFER 1.5 0.8 C844 10 50V
C840 100 10V C842 0.01 50V F:CHIP
VIDEO(REC)
P
VIDEO AGC
24
CNC
P
R
FBC
P
REG
CLAMP
Q821 2SD601A-QRS-TX BUFFER
C-VCC
BPF
NAP
KIL B.D
12 3
7
CLAMP
Y-GND
CLAMP
R845 2.2k 1/10W :CHIP
1.7
P
AGC DET
CLAMP
P
R839 1.8k 1/10W :CHIP
FM AGC
R
VIDEO (REC/PB)
C849 1 50V
1.8
R
DOUBLE LIMIT
SUB LPF
6
DETAIL ENH
N
MAIN PEAKING EMPH
C819 390p 50V H:CHIP C825 180p 50V CH:CHIP
TRICK HIGH OUT
(2.4)<1.8>
C-IN1
11
1.2 1/10W :CHIP
13
58 54 53 52
13 14
51 50 49
3.7 2.6
C861 0.01 50V 2.6 F:CHIP
IC801 LC89977M-TE-L 1H DELAY
2.6 C857 0.022 50V B:CHIP C852 47 10V
R870 2.2k
C864 0.0039 50V B:CHIP
L813 47µH
C851 C850 0.047 0.01 25V 50V F:CHIP B:CHIP C856 R852 1 1.5k 1/10W :CHIP 50V
(0) <3.7> 0
48
DL EQ
N.L. DE-EN
INV SLD
15
VCO
COMB
P
DHP NC
16
AMP
LPF
TH
3.0
C858 1 50V
C847 0.1 25V F:CHIP
(0.2)<2.7>
5
1.4
R856 8.2k 1/10W :CHIP
55
10 11 12
REC APC DET
0
AFC DET
R
PIC CTL
YC MIX
N.L. EMPH
S
DEMOO
3.1
C818 0 01 50V F:CHIP C822 1.6 22 25V L809 100µH (0)<1.4>
MOO
REC EQ
4
R862 680 1/10W :CHIP
C863 47 10V
2.1 R815 470 1/4W :FPRD
R859 1.8k 1/10W :CHIP
2.2
S
N
17
4.43MHz
(0.2 SECAM) <3.3 SECAM>
R861 47k 1/10W :CHIP
56
VX01
PB APC DET
BPF1
P
BPF2
MAIN EMPH
P
3
C859 0.1 25V F:CHIP
2.1
57
6 7 8
C-GND
R
9
P
PB BGA-B
SUB CONV
SUB BPF
MAIN CONV
R
S-EQ
(3.1)<1.4>
2
Q822 2SD601A-QRS-TX CLK BUFFER
12
VX02
3.6
6
SERIAL DECODER
1.8
PB BGA-A
P
R
ACC AMP
P
C-LPF
PB-EQ
2.5
R858 1k 1/10W :CHIP C855 0.047 25V B:CHIP
0
10
B
REC BGA
R
P
P
R
KIL
(0)<3.0> C816 22 50V B:CHIP
843 470 /10W CHIP
REC
BAL TC1
1
C824 (2.5)<0> CHIP 0.01 50V F:CHIP
O RF Y
PB-LP,SP
C1013 (2.7) 1 16V F:CHIP <2.2> C823 2.3 1 50V C820 1.8 47 25V B:CHIP
EQ AMP
1010 2.3 50V :PT R1011 R1015 10k 6.8k 1/10W 1/10W2.2 :CHIP :CHIP R1012 2.2 820 1/10W :CHIP
R857 1k 1/10W :CHIP
0
R,A
ACC DET
PB
2.2
C817 01 50V F:CHIP
R885 1k 1/10W :CHIP
65
68
2.4
69
0.2
2.3
C1021 10 50V
(1.0)<0>
2.2
2.2
75
70
AUDIO(PB) 76
2.2
77
78
79
0
(3.9) <0.3> 2.2
80 1
0.4 4.1(SECAM) C-ROT IN
2
C828 0.01 50V F:CHIP
SECAM DET
ALC
3
R873 1k 1/10W :CHIP
RF SW IN
VREF
ALC DET
4
C846 0.01 50V B:CHIP
(0)<3.8>
<0>
8 4.7 50V
AUDIO(REC)
MUTE CTL
A-VCC
PB
AUTO BIAS
5
R1025 2.2M 1/10W :CHIP
LINE AMP
REC
C1012 0.0015 AUDIO(REC) 50V B:CHIP (0.8)
4.8>
C1020 1 50V
MUTE
A-GND
REC-EP,LP PB-EP
11 15 V IP
R1013 2.2 18k 1/10W(2.2) :CHIP<0.1>
REC
A-H.SW
REC AMP
R1014 1.2k 1/10W 2.2 :CHIP
C1019 47 10V
C1017 4.7 50V
C1015 1 50V
72
R1019 10k 1/10W :CHIP
73
R1018 3.3k 1/10W :CHIP
R872 2.2k 1/10W :CHIP
R1024 68k 1/10W :CHIP
R1023 5.6k 1/10W :CHIP
71
R1017 5.6k 1/4W :FPRD
74
C1014 0.01 50V F:CHIP
66
L1004 47µH
C1016 47 16V
67
R1020 100 1/10W :CHIP
R848 4.7k 1/10W :CHIP
R883 1k 1/10W :CHIP
SW5V TO SERVO BLOCK CTL(X) CTL(Y) VCR A A MUTE SDA SCL NT JUDGE
VIDEO(PB)
ME SECAM QVD VCR V
VIDEO(REC)
TO MA10(1/3) BOARD SECAM ≠≠≠≠≠≠≠≠ ≠≠≠≠≠≠≠ ON SECAM DET
COMP SYNC RF ENV RF SWP DATA CLOCK
B-SS10253-MA10-P2-15
– 72 –
1
3
2
4
5
6
7
8
10
9
11
A CN702 4P
VOLTAGE no mark:REC/PB ( ):REC < >:PB
C727 0.01 50V F:CHIP
30
R708 1k 1/10W :CHIP
27
(1.9) <2.2>
26
(0.3) <1.3> C725 0.1 25V F:CHIP C719 0.1 25V F:CHIP
Q701 2SD601A-QRS-TX BUFFER
2 (1.2) (0.6) <2.9> <2.2>
VIDEO RF(PB)
CLOCK DATA COMP SYNC RF SWP RF ENV GND REC RF 5V PB RF GND
23 22 21 20
VIDEO RF(REC) C726 0.01 50V F:CHIP
TO MA10(2/3) BOARD
VIDEO RF(PB)
3.2 R711 1k 1/10W :CHIP
19
R712 1k 1/10W :CHIP
14
EP REC
15
18
R706
17
12 13
R710 1k 1/10W :CHIP
VIDEO RF(PB)
0.3
VCC
LOGIC SP/EP REC/PB ENV DET T.PLAY AGC CONT R.MUTE
SW6
SW10
R709 3.3k 1/10W :CHIP
R707 10k 1/10W :CHIP
3
PB
0.6
(1.2) <2.9>
3.1
REC SW2
0
C702 0.01 50V F:CHIP
22k (2.8) 1/10W <2.2> :CHIP
4
C720 100 10V
F
L704 100µH
16
11
PB
0.6
C728 0.01 50V F:CHIP
(1.6) <0.8>
VIDEO RF(REC)
24 SW5
R701 100 1/10W :CHIP
25
6 7 8 9 10
ENV DET
COMP
0
HPF AMP
REC IDLE
DET
SW9
EP REC
2.1
C717 0.01 50V F:CHIP
CHECK CONNECTOR
29 28
1 2 3 5
L703 100µH
3.6
DET
C707 0.022 50V F:CHIP
SW8
DET
C716 0.022 50V F:CHIP
VCA
(4.5) <2.1>
SP REC
C709 C713 39p 39p 50V 50V CH:CHIP CH:CHIP
E
VCC
VCA
(3.8) <0>
REC CUR PB RF RF SWP GND
C724 100 10V
C718 0.01 50V F:CHIP
SW4
C701 0.022 50V F:CHIP
D
DET
(0) <0.6>
PB
C
VIDEO RF(REC)
C723 0.1 25V F:CHIP
R705 1.8k 1/10W :CHIP
(3.6) <4.8>
1 SW1
C706 22p 50V CH:CHIP
VIDEO RF(PB)
SW3
REC
(3.8) <0>
REC ADJ
C712 0.022 50V (0.1) F:CHIP<0.6>
R702 680 1/10W :CHIP
EP
C705 0.022 50V F:CHIP
(3.8) <0>
PB
SP CH1
VIDEO RF(PB)
SP
SP CH2
SW7
SP REC
1 1 LP2 S 2 LP COMMON F 2 3 3 LP1 S 4 4 SP2 S 5 SP COMMON F 5 6 6 SP1 S
(1.8) <2.2>
4
C711 0.022 50V F:CHIP
CN701 6P
B
IC701 HA118295NT VIDEO REC/PB AMP
1 2 3 4
C722 0.1 25V F:CHIP
MA10(3/3) (AC IN, VIDEO REC/PB AMP)
CN1702 5P :VH
JW186 12.5MM VDR601
S1701
AC IN CN1703 0P :TAB
1
R1701 1M 1/2W
C1701 0.1 300V :MPS
2
4
B-SS10253-MA10-P3-15
T1701
3
4
2 FH1701
1
AC IN 1 AC IN 2
G
F1701 :FUSE
3
CN1701 2P :VH
JW185 12.5MM C1702 0.1 300V :MPS
1 2 3 4 5
AC NC NC NC AC NUET TO A BOARD CN601
GND 1
• MA10 (3/3) BOARD WAVEFORMS
C1703 0.0047 250V E
H
1
REC
2
62mVp-p (H)
3
REC/PB
2.2Vp-p (H)
– 73 –
– 74 –
PB
0.36Vp-p (H)
4
PB
5.0Vp-p (H)
5-4.SEMICONDUCTORS IC
TRANSISTOR
BA10393F-E2 BA6305F-E2 BA7755AF-E2 M24C16-MN6T NJM062M S-3510ACFJA-TB
MC33364DR2
LA6393DLL M5216P
1
TOP VIEW
1
SDA5650-GEG
1
TOP VIEW
8pin DIP
BC327-25 BC337-25 2SA1091O 2SC1815-GR 2SD879
2SA1837 2SC4793
2 1 3 2
B
1
TOP VIEW
64 65
8pin SOP
SE-135N-LF4
41 40
ANODE
4 3
LETTER SIDE
CATHODE
BF420-126
TOP VIEW
37
1
1
PQ05RD11 PQ09RD11
36
LA7337
2 3
ANODE CATHODE
SI-3120C
25
12 13 24 TOP VIEW
1
D2SB60F
TOP VIEW
1
3
4 5
STR-F6654-LF135 G
1
CXP85452-233Q-TL
52
32
64
20
7pin SIP
GL528V1 LB1643
1 3
1
-
-
~ ~
TDA7494 CXP87852-063Q-TL
2
1
MARKING SIDE VIEW
5 51
81
3 50
1
1
LC89978M-TE-L
INDEX
15pin ZIP
SAA5563PS/M3/0189
31
100
DTC114TK UN211L UN2113 UN2211 UN2213 2SA1037AK-T146-R 2SA1162-G 2SC1623-L5L6 2SC2712-YG 2SD601A-Q
30
TOP VIEW
µPC1093J-1-T 1
1
TOP VIEW
16pin SOP
TOP VIEW
C B E
52pin DIP
L78L33ABZ-AP
CATHODE
ANODE
HA118295NT
2
31
3
E
2
C
DAN202K 3
TOP VIEW
ANODE
30pin DIP
CATHODE
CATHODE
SLR-325DCT31 SLR-325VCT31
ANODE
MTZJ-13 MTZJ-4.3B MTZJ-4.7C MTZJ-5.1C MTZJ-6.2B RD10ESB2 RD18ES-B2 RD3.9ES-B2 RD39ES-B2 RD5.6ESB2 RD6.2ESB-2 RD6.8ES-B2 RD8.2ES-B3 RD9.1ES-B3 1SS119-25 11ES2
2 1 3
CATHODE
2 1
ANODE
– 75 –
CATHODE
EGP30D
AK04V0 D1NL20U D1NL20U-TR2 D2S6MF EGP20G EL1Z ERA22-08 ERC06-15S GP08D RG1C-LFC1 1SS133T-77
RPT-37PBT32 RPT-37PB3F
SBX1981-51(21)
-
ANODE
DIODE
µPC574J
1
~-
4 5
PST572C
TOP VIEW
-
E 2
19
~
C
4
GP3S120
CATHODE
D4SB60L
D S
B
33
1
ANODE
-
BU4508DX-ON5210 2SC5388
PQ30RV11
MARKING SIDE VIEW
48pin DIP
80
~ ~
LA7840L
1
-
-
2
12 34
UDZS-TE17-5.6B UDZS-TE17-9.1B
2SK2251-01 2SK2733(LBS4SONY)
B C E
CXA2139S
51
ANODE
E C B
28pin DIP
TOP VIEW
RN1Z-LF-B1 RN3Z-LF014-302
2
25 24
80 1
1
DTZ10B DTZ-TT11-16B MA111 1SS355TE-17
1
CXA1855Q
1
1
C E
2SA933AS-QT 2SC2785-HFE E C B
48
CATHODE
3
20pin SOP
PC123F2
RU4AM-T3
TOP VIEW
16pin SOP
LA71514M-MPB
DAP202K
– 76 –
ANODE
CATHODE
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
SECTION 6 EXPLODED VIEWS • The construction parts of an assembled part are indicated with a collation number in the remark column.
NOTE: • Items with no part number and no description are not stocked because they are seldom required for routine service.
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
• Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
6-1. PICTURE TUBE : 7-685-648-79 : 7-685-663-71 : 7-685-663-79
+BVTP 3X12 +BVTP 4X16 +BVTP 4X16
27 26
29
30 31
17
32
27 16
1
18
25
19
28
15 12
24
28
14
21
23 22
2 3
20 13
7 8
4
9
10 6
5
REF. NO. PART NO. ------------ ------------1 X-4200-633-1 1 X-4200-643-1 1 X-4200-644-1 1 X-4200-628-1 1 X-4200-638-1
11 DESCRIPTION ------------------BEZNET ASSY BEZNET ASSY BEZNET ASSY BEZNET ASSY BEZNET ASSY
REMARK ------------(14FV1D, 14FV1E) 2-13 (14FV1B) 2-13 (14FV1U) 2-13 (21FV1D, 21FV1E) 2-13 (21FV1U) 2-13
REF. NO. PART NO. ------------ ------------18 4-074-601-01 18 4-704-495-01 19 2-163-920-01 20 ! 8-738-570-05 20
1 2 3 4 5
X-4200-639-1 4-205-325-01 4-050-155-01 4-205-318-01 4-205-326-01
BEZNET ASSY GUIDE, LIGHT SPRING, FL DOOR, CONTROL WINDOW, REMOTE
6 7 8 9 10
3-703-035-11 4-072-192-01 4-045-250-01 4-204-426-01 4-205-387-01
SHAFT, LID CHATCHER, PUSH DAMPER SPRING LABEL CONTROL
(21FV1B) 2-13
DESCRIPTION REMARK ------------------------------SPACER, DY (14inch model) SPACER, DY (21inch model) PLATE, TLH CORRECTION PICTURE TUBE (A34LRG70X) (14inch model) ! 8-738-836-05 PICTURE TUBE (A51LPT60X) (21inch model)
24
! 1-416-864-12 COIL, VM ! 8-451-401-21 DEFLECTION YOKE (Y14RSA-L) (14inch model) ! 8-451-505-41 DEFLECTION YOKE (Y21RSA-L) (21inch model) ! 1-452-728-61 COIL, NA ROTATION (RT-154) (21inch model) 4-369-318-21 SPRING, TENSION
25 25 26 27 27
! 1-419-548-11 ! 1-419-772-11 4-203-390-11 4-205-377-01 4-204-900-01
28 28 29
4-205-314-01 REAR COVER (14) (14inch model) 4-205-316-01 REAR COVER (21) (21inch model) ! 1-251-317-32 CAP ASSY, HIGH VOLTAGE 17 (14inch model) 1-452-032-00 MAGNET,DISK ; 10mmø 1-452-094-00 MAGNET, ROTATABLE DISK ; 15mmø 4-051-736-21 PIECE A(90), CONV. CORRECT
21 22 22 23 (AEP/ESP/UK model)
10 11 12 13 14
4-205-387-11 LABEL CONTROL 4-205-323-01 BUTTON, POWER 4-205-319-01 TRAY, CASSETTE * 4-203-553-11 SHEET, BLOTTING * A-1639-006-A CVM BOARD COMPLETE
14 15 15 16 17
* A-1639-005-A CVM BOARD COMPLETE 1-529-474-11 SPEAKER (5CM) 1-529-710-11 SPEAKER (5X9CM) 4-365-808-01 SCREW (5), TAPPING 4-203-097-01 HOLDER, HV
(FR model) (21inch model) (14inch model) (21inch model) (14inch model) (21inch model) (14inch model)
– 77 –
30 31 32
COIL, DEGAUSSING COIL, DEGAUSSING CUSHION, DGC HOLDER, DGC BAND, DGC
(14inch model) (21inch model) (21inch model) (14inch model) (21inch model)
6-2. CHASSIS : 7-685-648-79 : 7-682-147-01
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
+BVTP 3X12 +P 3X6
66
56
54
65
59
71
61
51 53
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
57
70 63
55
67
68
62
64 52
69
REF. NO. PART NO. DESCRIPTION ------------ ------------------------------51 * A-1632-904-A A BOARD, COMPLETE 51 * A-1632-910-A A BOARD, COMPLETE 51 * A-1632-911-A A BOARD, COMPLETE 51 * A-1632-900-A A BOARD, COMPLETE 51 * A-1632-907-A A BOARD, COMPLETE
REMARK ------------(14FV1D,14FV1E) (14FV1B) (14FV1U) (21FV1D,21FV1E) (21FV1B)
REF. NO. PART NO. ------------ ------------60 3-979-508-01 61 8-598-536-00 61 8-598-532-00 61 8-598-528-00 62 8-598-536-00
DESCRIPTION REMARK ------------------------------SCREW +HXA TPSW 3X8 FRONTED BTF-EF412 (VTR) (FR model) FRONTED BTF-EC402 (VTR) (AEP/ESP model) FRONTED BTF-EU602 (VTR) (UK model) FRONTED BTF-EF412 (TV) (FR model)
51 52 53 54 54
* A-1632-906-A A BOARD, COMPLETE (21FV1U) 4-205-324-01 BUTTON, RECORDING 4-205-332-01 BUTTON, MAIN POWER * A-1635-042-A MA10 BOARD, COMPLETE(14FV1D,14FV1U) * A-1635-043-A MA10 BOARD, COMPLETE (14FV1E)
62 62 63
54 54 54 54
* A-1635-044-A MA10 BOARD, COMPLETE (14FV1B) * A-1635-042-A MA10 BOARD, COMPLETE(21FV1D,21FV1U) * A-1635-043-A MA10 BOARD, COMPLETE (21FV1E) * A-1635-044-A MA10 BOARD, COMPLETE (21FV1B)
64
8-598-532-00 FRONTED BTF-EC402 (TV) (AEP/ESP model) 8-598-528-00 FRONTED BTF-EU602 (TV) (UK model) ! 8-598-852-00 TRANSFORMER ASSY, FLYBACK (NX-1912//M) (14inch model) ! 1-453-314-11 TRANSFORMER ASSY, FLYBACK (21inch model) * A-1646-216-A H10 BOARD, COMPLETE
65 65 66 67 68
! 1-765-286-11 ! 1-776-860-12 4-022-115-00 * 4-205-333-01 * 4-316-015-00
69 70
* 4-205-327-01 BRACKET, MAIN ! 1-900-900-24 LEAD ASSY, FOCUS
55 56 57 58 59
1-900-905-61 1-900-905-74 1-900-905-56 1-900-905-60 4-205-331-01
CONNECTOR ASSY 35P CONNECTOR ASSY, MICRO 5P (21inch model) CONNECTOR ASSY 7P CONNECTOR ASSY 5P BOARD TERMINAL
63
71
– 78 –
CORD, POWER (AEP,ESP,FR model) POWER CORD, FILTER (UK) (UK model) HOLDER, AC CORD COVER, TOP HOLDER, WIRE
1-419-494-44 COIL, CHOKE 56.0MM
(21inch model)
6-3. MECHANISM DECK ASSEMBLY (1) : 7-685-646-79
+BVTP 3X8
207
210 208 209 206 205 202
Not supplied
224
204
212 211
203
201
213 223
201
220
221 222 216 219
214 215
217 218
REF. NO. PART NO. ------------ ------------201 3-977-509-01 202 3-977-507-01 203 3-977-508-01 204 1-500-471-11 205 3-977-495-01
DESCRIPTION ------------------WASHER, THRUST TABLE, REEL (S) TABLE, REEL (T) HEAD, FE SHAFT TG2
REMARK -------------
206 207 208 209 210
3-977-494-01 HOLDER, FEH A-6759-619-B FL COMPLETE ASSY 208-210 3-977-535-01 PLATE, LUMINOUS(END SENSOR) 3-977-536-01 PLATE, LUMINOUS(TOP SENSOR) 3-970-471-01 SPRING (DECK OPEN), TORSION
211 212
A-6759-863-B PRESS BLOCK ASSY, PINCH 3-958-455-01 SPRING (PINCH), TENSION
REF. NO. PART NO. DESCRIPTION ------------ ------------------------------213 3-977-447-01 GEAR, ELEVATOR 214 3-977-514-01 OPENER, LID 215 3-977-441-03 GEAR, PINCH PRESSING
212
– 79 –
REMARK -------------
216 217 218 219 220
3-977-445-02 3-062-763-01 X-3947-582-1 3-977-446-01 X-3947-590-1
GEAR, TG8 ARM DRIVING SPRING,EXTENSION(RVS BRAKE) ARM ASSY, RVS BRAKE GEAR, TG8 ARM TG8 ASSY 221,222
221 222 223 224
3-059-300-03 LOCK ACE SCREW 3-059-958-01 SPRING, TG8 A-6775-791-A ACE BLOCK ASSY (ALPS) (EURO3) 3-979-508-01 SCREW +HEXA TP SW 3X8
6-4. MECHANISM DECK ASSEMBLY (2) : 7-685-646-79
+BVTP 3X8
266 269 267 268 261
259 262 263
260 258
263 262
257 265
256
264
255 254
252
253
251
REF. NO. PART NO. ------------ ------------251 X-3947-581-4 252 3-977-462-01 253 X-3947-573-1 254 X-3947-580-5 255 3-050-810-04 256 257 258 259 260
3-976-767-01 3-977-487-01 X-3950-427-1 3-969-632-04 3-977-488-01
DESCRIPTION REMARK ------------------------------BRAKE ASSY,MAIN(T) SPRING,EXTENTION. (MAIN BRAKE) ARM ASSY, PENDULUM BRAKE ASSY, MAIN(S) LEVER, REC. PROOF SPRING, TENS. (REC. PROOF) BOSS, TG1 FULCRUM TG1 ASSY (SD) BASE, DRUM SPRING (POWER TENSION)
REF. NO. PART NO. DESCRIPTION ------------ ------------------------------261 A-6775-922-A SHUTTLE (S) BLOCK ASSY, ST 262 3-965-178-01 SPRING 263 X-3948-050-1 ROLLER ASSY, GUIDE 264 A-6750-328-G SHUTTLE (T) BLOCK ASSY 265 3-977-501-01 PLATE, LUMINOUS 266 267 268 269
– 80 –
A-6746-074-G ROLLER BLOCK ASSY, HC X-3947-255-1 ROLLER ASSY, HC 3-975-724-07 ARM, HC x-xxx-xxx-xx DRUM ASSY (XXX)
REMARK ------------262,263 262,263 267,268
6-5. MECHANISM DECK ASSEMBLY (3) : 7-685-646-79 : 7-685-133-19
316
+BVTP 3X8 +BVTP 2.6
315 317
336
318
303
303
335
314 312 313 328
311
329
319 320 321
310 308 309
327 326
307 305
322
304
306
323 324
332 334
325 333
331 337 REF. NO. PART NO. ------------ ------------301 3-977-437-01 302 X-3947-584-1 303 3-977-443-01 304 3-977-438-01 305 3-977-506-01
301
303 302
DESCRIPTION ------------------RETAINER,CAM MOTOR ASSY, REEL DIRECT WASHER, STOPPER WORM - WHEEL ARM, LIMITTER SELECTION
306 307 308 309 310
3-977-444-01 3-977-515-01 3-977-517-01 3-977-519-01 3-977-518-02
GEAR, PINCH TRANSMISSION GUIDE, FL SLIDER PLATE, SLIDE, FL SPRING, TENS. (LIMIT, FL) PLATE, LIMITTER, FL
311 312 313 314 315
3-977-516-01 3-977-877-01 3-977-504-01 X-3947-585-1 3-977-510-01
HOLDER, FL SLIDER PLATE, RETAINER GEAR, CLUTCH GEAR ASSY, PULLEY BELT, RUBBER
316 317 318 319
3-056-952-11 3-977-439-01 3-977-442-01 3-977-455-01
WASHER, STOPPER GEAR, CAM SLIDER GEAR, LOADING(T)
330 REMARK -------------
REF. NO. PART NO. DESCRIPTION ------------ ------------------------------320 3-977-456-03 SPRING, TORSION (LOAD T)
– 81 –
REMARK -------------
321 322 323 324 325
X-3948-132-2 LEVER ASSY, LOADING(T) 3-977-451-01 GEAR, LOADING(S) 3-977-452-01 SPRING, TORSION (LOAD S) X-3948-133-1 LEVER ASSY, LOADING(S) A-6759-616-A GEAR BLOCK ASSY, LOADING(S)322-324
326 327 328 329 330
3-977-468-01 3-977-467-02 X-3947-583-1 3-977-489-01 3-989-917-01
SHAFT, CAPSTAN BRAKE SPRING, CAP BRAKE BRAKE ASSY, CAPSTAN ARM, TG1 DRIVING SPACER (REC PROOF)
331 332 333 334 335
X-3947-577-1 1-766-723-21 1-541-309-11 3-977-436-01 3-056-824-01
MOTOR ASSY, CAM (LOADING) 332-334 CONNECTOR, BOARD TO BOAR 3P MOTOR, L (RF-370C) WORM WASHER, STOPPER
336 337
1-698-971-11 MOTOR, DC 3-974-477-01 WASHER, (GEAR, LIMITTER)
SECTION 7
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
ELECTRICAL PARTS LIST
A NOTE: REF. NO. PART NO. DESCRIPTION -----------------------The components identified------------------by shading and mark ! are critical for safety. Replace only with part number specified.
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
When indicating parts by referenceREMARK number, DESCRIPTION please include the board name. -------------------------------
• All variable and adjustable resistors have characteristic curve B, unless otherwise noted.
• CAPACITORS PF : µµ F
RESISTORS • All resistors are in ohms • F : nonflammable
• There are some cases the reference number on one board overlaps on the other board. Therefore, when ordering parts by the reference number, please include the board name.
TV BLOCK REF. NO. ------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Items marked " * " are notREF. stocked theyNO. are REMARK NO. since PART -----------------------------------seldom required for routine service. Some delay should be anticipated when ordering these items.
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
PART NO. DESCRIPTION REMARK ------------------------------------------* A-1632-910-AA BOARD, COMPLETE (KV-14FV1B) ****************************
* A-1632-904-AA BOARD, COMPLETE (KV-14FV1D/14FV1E) *************************** * A-1632-911-AA BOARD, COMPLETE (KV-14FV1U) *************************** * A-1632-907-AA BOARD, COMPLETE (KV-21FV1B) ***************************
* A-1632-900-AA BOARD, COMPLETE (KV-21FV1D/21FV1E) *************************** * A-1632-906-AA BOARD, COMPLETE (KV-21FV1U) ***************************
1-555-110-00 CABLE, PIN (TU101-CP101) 4-382-854-01 SCREW (M3X8), P, SW (+) (IC501, IC603, IC605, IC608, IC610, Q802) 4-382-854-11 SCREW (M3X10), P, SW (+) (IC606) C101 C102 C103 C104 C105
1-163-021-91 CERAMIC CHIP 1-126-964-11 ELECT 1-163-021-91 CERAMIC CHIP 1-104-664-11 ELECT 1-164-004-11 CERAMIC CHIP
0.01UF 10UF 0.01UF 47UF 0.1UF
10.00% 20.00% 10.00% 20.00% 10.00%
50V 50V 50V 25V 25V
C106 C107 C108 C109 C110
1-104-664-11 ELECT 1-163-021-91 CERAMIC CHIP 1-126-964-11 ELECT 1-163-021-91 CERAMIC CHIP 1-104-664-11 ELECT
47UF 0.01UF 10UF 0.01UF 47UF
20.00% 10.00% 20.00% 10.00% 20.00%
25V 50V 50V 50V 25V
C111 C112 C113 C114 C115
1-164-004-11 CERAMIC CHIP 1-104-664-11 ELECT 1-163-113-00 CERAMIC CHIP 1-163-113-00 CERAMIC CHIP 1-163-113-00 CERAMIC CHIP
0.1UF 47UF 68PF 68PF 68PF
10.00% 20.00% 5.00% 5.00% 5.00%
25V 25V 50V 50V 50V
C116 C117 C118 C119 C120
1-164-346-11 CERAMIC CHIP 1-164-346-11 CERAMIC CHIP 1-164-004-11 CERAMIC CHIP 1-164-004-11 CERAMIC CHIP 1-163-809-11 CERAMIC CHIP
1UF 1UF 0.1UF 0.1UF 0.047UF
16V 16V 10.00% 25V 10.00% 25V 10.00% 25V
C121 C122 C123 C124 C301
1-104-760-11 CERAMIC CHIP 1-163-253-11 CERAMIC CHIP 1-163-253-11 CERAMIC CHIP 1-163-113-00 CERAMIC CHIP 1-126-963-11 ELECT
0.047UF 120PF 120PF 68PF 4.7UF
10.00% 5.00% 5.00% 5.00% 20.00%
C302 C303
1-163-233-11 CERAMIC CHIP 18PF 1-126-964-11 ELECT 10UF
C304 C306 C307
1-163-233-11 CERAMIC CHIP 18PF 1-163-259-91 CERAMIC CHIP 220PF 1-126-957-11 ELECT 0.22UF
C308
1-115-185-11 CERAMIC CHIP 0.033UF
50V 50V 50V 50V 50V
5.00% 50V 20.00% 50V (21inch model) 5.00% 50V 5.00% 50V 20.00% 50V 10.00% 50V (14inch model)
REF. NO. -----------C308
PART NO. DESCRIPTION ------------------------------1-107-823-11 CERAMIC CHIP 0.47UF
C309 C310 C311
1-126-965-11 ELECT 1-126-964-11 ELECT 1-104-664-11 ELECT
22UF 10UF 47UF
REMARK ------------10.00% 16V (21inch model) 20.00% 50V 20.00% 50V 20.00% 25V
C312 C313 C315 C317 C318
1-126-963-11 ELECT 1-115-339-11 CERAMIC CHIP 1-104-664-11 ELECT 1-126-964-11 ELECT 1-104-665-11 ELECT
4.7UF 0.1UF 47UF 10UF 100UF
20.00% 10.00% 20.00% 20.00% 20.00%
C319 C320 C321 C322 C323
1-163-038-11 1-163-031-11 1-163-038-11 1-163-031-11 1-163-031-11
0.1UF 0.01UF 0.1UF 0.01UF 0.01UF
C325 C326 C327 C328 C329
1-104-664-11 ELECT 1-126-960-11 ELECT 1-163-009-11 CERAMIC CHIP 1-107-714-11 ELECT 1-163-113-00 CERAMIC CHIP
47UF 20.00% 25V 1UF 20.00% 50V 0.001UF 10.00% 50V 10UF 20.00% 16V 68PF 5.00% 50V
C330 C333 C335 C339 C401
1-104-665-11 ELECT 1-163-021-91 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP 1-163-038-11 CERAMIC CHIP 1-126-964-11 ELECT
100UF 0.01UF 0.01UF 0.1UF 10UF
20.00% 25V 10.00% 50V 10.00% 50V 25V 20.00% 50V
C402 C403 C404 C405 C406
1-126-964-11 ELECT 1-126-964-11 ELECT 1-126-964-11 ELECT 1-104-664-11 ELECT 1-164-346-11 CERAMIC CHIP
10UF 10UF 10UF 47UF 1UF
20.00% 20.00% 20.00% 20.00%
C407 C408 C410 C412 C413
1-164-346-11 CERAMIC CHIP 1-163-009-11 CERAMIC CHIP 1-104-664-11 ELECT 1-164-505-11 CERAMIC CHIP 1-126-935-11 ELECT
1UF 16V 0.001UF 10.00% 50V 47UF 20.00% 25V 2.2UF 16V 470UF 20.00% 6.3V
C414 C418 C419 C420 C421
1-164-346-11 1-164-346-11 1-163-021-91 1-163-021-91 1-163-021-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1UF 1UF 0.01UF 0.01UF 0.01UF
16V 16V 10.00% 50V 10.00% 50V 10.00% 50V
C501 C502 C504 C505 C507
1-126-934-11 ELECT 1-126-960-11 ELECT 1-107-910-11 ELECT 1-115-339-11 CERAMIC CHIP 1-107-910-11 ELECT
220UF 1UF 100UF 0.1UF 100UF
20.00% 20.00% 20.00% 10.00% 20.00%
C508 C509 C510 C511 C513
1-106-220-00 MYLAR 1-137-194-81 FILM 1-163-031-11 CERAMIC CHIP 1-102-244-00 CERAMIC 1-126-941-11 ELECT
0.1UF 0.47UF 0.01UF 220PF 470UF
10.00% 100V 5.00% 50V 50V 10.00% 500V 20.00% 25V
C514 C515 C601 C602 C603
1-163-031-11 CERAMIC CHIP 1-107-652-11 ELECT 1-104-664-11 ELECT ! 1-117-699-51 CERAMIC ! 1-117-699-51 CERAMIC
– 82 –
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
50V 50V 25V 50V 25V 25V 50V 25V 50V 50V
50V 50V 50V 25V 16V
16V 50V 50V 50V 50V
0.01UF 50V 10UF 20.00% 250V 47UF 20.00% 25V 0.001UF 250V 0.001UF 250V
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
0.001UF 180UF 0.1UF 0.001UF 10UF
REMARK ------------250V 20% 450V 5.00% 50V 250V 20.00% 100V
C610 C612 C614 C615 C616
1-104-664-11 ELECT 1-126-943-11 ELECT 1-130-785-11 MYLAR 1-130-785-11 MYLAR 1-107-681-41 ELECT
47UF 2200UF 0.47UF 0.47UF 33UF
20.00% 20.00% 10.00% 10.00% 20.00%
25V 25V 100V 100V 450V
C617 C618 C619 C620 C621
1-104-664-11 ELECT 1-163-005-11 CERAMIC CHIP 1-164-645-11 CERAMIC 1-126-941-11 ELECT 1-104-664-11 ELECT
47UF 470PF 1000PF 470UF 47UF
20.00% 10.00% 10.00% 20.00% 20.00%
25V 50V 500V 25V 25V
C622 C623 C624 C625 C626
1-104-664-11 ELECT 1-126-969-11 ELECT 1-164-645-11 CERAMIC 1-126-972-11 ELECT 1-126-944-21 ELECT
47UF 220UF 1000PF 1000UF 3300UF
20.00% 20.00% 10.00% 20.00% 20.00%
25V 50V 500V 50V 25V
C627 C628 C630 C631 C632
1-164-645-11 CERAMIC 1-163-009-11 CERAMIC CHIP 1-162-134-11 CERAMIC 1-163-021-91 CERAMIC CHIP 1-127-759-51 ELECT
1000PF 0.001UF 470PF 0.01UF 100UF
10.00% 10.00% 10.00% 10.00% 20%
500V 50V 2KV 50V 160V
C634 C635 C636 C638 C639
1-163-021-91 CERAMIC CHIP 1-102-050-00 CERAMIC 1-163-005-11 CERAMIC CHIP 1-109-880-11 FILM 1-163-017-00 CERAMIC CHIP
0.01UF 0.01UF 470PF 0.0015UF 0.0047UF
10.00% 50V 500V 10.00% 50V 3.00% 2KV 10.00% 50V
C640 C641 C642 C643 C644
1-163-001-11 CERAMIC CHIP 1-102-114-00 CERAMIC 1-130-338-91 FILM 1-117-699-11 CERAMIC 1-163-005-11 CERAMIC CHIP
220PF 470PF 0.01UF 0.001UF 470PF
10.00% 50V 10.00% 50V 5.00% 630V 250V 10.00% 50V
C645 C646 C647 C648 C649
1-104-664-11 ELECT 1-126-943-11 ELECT 1-104-665-11 ELECT 1-164-004-11 CERAMIC CHIP ! 1-117-699-51 CERAMIC
47UF 20.00% 25V 2200UF 20.00% 25V 100UF 20.00% 25V 0.1UF 10.00% 25V 0.001UF 250V
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. PART NO. DESCRIPTION ------------ ------------------------------C604 ! 1-117-699-51 CERAMIC C605 1-125-991-11 ELECT C606 1-136-165-00 FILM C607 ! 1-117-699-51 CERAMIC C609 1-107-929-11 ELECT
C650 C655 C657 C659 C660
1-137-605-11 MYLAR 1-126-942-61 ELECT 1-104-664-11 ELECT 1-161-964-51 CERAMIC 1-104-666-11 ELECT
0.01UF 1000UF 47UF 0.0047UF 220UF
10.00% 250V 20.00% 25V 20.00% 25V 250V 20.00% 25V
C661 C662 C663 C664 C665
1-115-339-11 CERAMIC CHIP 1-128-551-11 ELECT 1-104-665-11 ELECT 1-104-665-11 ELECT 1-104-665-11 ELECT
0.1UF 22UF 100UF 100UF 100UF
10.00% 20.00% 20.00% 20.00% 20.00%
50V 25V 25V 25V 25V
C666 C667 C668 C669 C670
1-126-933-11 ELECT 1-102-106-00 CERAMIC 1-126-949-11 ELECT 1-104-664-11 ELECT 1-104-664-11 ELECT
100UF 100PF 220UF 47UF 47UF
20.00% 10.00% 20.00% 20.00% 20.00%
16V 50V 35V 25V 25V
C801
1-106-371-00 MYLAR
0.015UF
C801
1-107-364-11 MYLAR
0.01UF
C802 C803
1-126-941-11 ELECT 1-119-859-11 FILM
470UF 0.36UF
C803
1-117-667-11 FILM
0.47UF
99% 200V (14inch model) 10.00% 400V (21inch model) 20.00% 25V 5.00% 250V (14inch model) 5.00% 250V (21inch model)
C804 C805 C806
1-104-664-11 ELECT 1-123-024-21 ELECT 1-162-117-00 CERAMIC
47UF 33UF 100PF
C806
1-102-228-00 CERAMIC
470PF
C807
1-107-650-11 ELECT
3.3UF
A
REF. NO. -----------C808 C809 C810 C812
PART NO. DESCRIPTION ------------------------------1-163-275-11 CERAMIC CHIP 1-163-038-11 CERAMIC CHIP 1-162-318-11 CERAMIC 1-107-366-11 MYLAR
0.001UF 0.1UF 0.001UF 0.022UF
C812
1-136-196-11 MYLAR
0.033UF
C813
1-117-721-11 CERAMIC CHIP 4700PF
20.00% 25V 160V 10.00% 500V (14inch model) 10.00% 500V (21inch model) 20.00% 250V
– 83 –
C813 C817 C818 C818
5.00% 25V (14inch model) 1-164-690-91 CERAMIC CHIP 0.0022UF 5.00% 50V (21inch model) 1-102-114-00 CERAMIC 470PF 10.00% 50V (14inch model) 1-163-263-11 CERAMIC CHIP 330PF 5.00% 50V (14inch model) 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V (21inch model)
C819 C820
1-115-522-11 FILM 1-106-375-12 MYLAR
1UF 0.022UF
C820
1-106-383-00 MYLAR
0.047UF
C821
! 1-162-116-51 CERAMIC
680PF
C821
! 1-162-134-51 CERAMIC
470PF
C822 C823 C824
1-136-207-11 MYLAR 1-162-131-11 CERAMIC ! 1-117-637-31 FILM
0.047UF 220PF 5600PF
C824
! 1-117-643-21 FILM
C826
1-137-417-11 MYLAR ! 1-129-716-51 FILM
0.015UF
C827
! 1-135-840-51 FILM
0.036UF
1-102-030-00 CERAMIC
5.00% 250V 99% 200V (14inch model) 10.00% 200V (21inch model) 10.00% 2KV (14inch model) 10.00% 2KV (21inch model)
10.00% 250V 10.00% 2KV 3.00% 1.2KV (14inch model) 9100PF 3.00% 1.2KV (21inch model) 0.0047UF 10.00% 200V
C827
C830
REMARK ------------5.00% 50V 25V 10.00% 500V 10.00% 200V (14inch model) 10.00% 250V (21inch model)
330PF
5.00% 630V (14inch model) 3% 400V (21inch model) 10.00% 500V
CN301 CN302 CN304 CN305 CN306
1-785-386-11 SOCKET, CONNECTOR 35P * 1-564-510-11 PLUG, CONNECTOR 7P * 1-564-508-11 PLUG, CONNECTOR 5P * 1-564-509-11 PLUG, CONNECTOR 6P * 1-564-509-11 PLUG, CONNECTOR 6P
CN601 CN602 CN603 CN604 CN606
* 1-691-291-11 PIN, CONNECTOR (PC BOARD) 5P * 1-508-786-00 PIN, CONNECTOR (5mm PITCH) 2P * 1-508-765-00 PIN, CONNECTOR (5mm PITCH) 3P 1-695-915-11 TAB (CONTACT) * 1-691-960-11 PIN, CONNECTOR (PC BOARD) 3P (21inch model)
CN801 CN803
* 1-580-798-11 CONNECTOR PIN (DY) 6P * 1-564-508-11 PLUG, CONNECTOR 5P
CP101
1-251-658-11 SPLITTER RF
D101 D102 D103 D301 D302
8-719-914-43 8-719-069-55 8-719-069-55 8-719-109-89 8-719-109-89
DIODE DAN202K ZENER DIODE UDZS-TE17-5.6B ZENER DIODE UDZS-TE17-5.6B ZENER DIODE RD5.6ESB2 ZENER DIODE RD5.6ESB2
D304 D305 D307 D308 D313
8-719-110-14 8-719-911-19 8-719-911-19 8-719-110-14 8-719-110-14
ZENER DIODE RD9.1ES-B3 DIODE 1SS119-25 DIODE 1SS119-25 ZENER DIODE RD9.1ES-B3 ZENER DIODE RD9.1ES-B3
D314
8-719-914-44 DIODE DAP202
(21inch model)
A
PART NO. DESCRIPTION REMARK ------------------------------------------8-719-069-60 ZENER DIODE UDZS-TE17-9.1B 8-719-110-17 ZENER DIODE RD10ESB2 8-719-109-97 ZENER DIODE RD6.8ES-B2 8-719-110-14 ZENER DIODE RD9.1ES-B3
D406 D407 D408 D409 D410
8-719-110-14 ZENER DIODE RD9.1ES-B3 8-719-109-97 ZENER DIODE RD6.8ES-B2 8-719-110-14 ZENER DIODE RD9.1ES-B3 8-719-921-86 ZENER DIODE MTZJ-13 8-719-921-54 ZENER DIODE MTZJ-6.2B
D411 D412 D413 D414 D501
8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-109-97 ZENER DIODE RD6.8ES-B2 8-719-109-97 ZENER DIODE RD6.8ES-B2 8-719-109-97 ZENER DIODE RD6.8ES-B2 8-719-110-49 ZENER DIODE RD18ES-B2
D502 D503 D506 D507 D601
8-719-109-89 ZENER DIODE RD5.6ESB2 8-719-908-03 DIODE GP08D 8-719-302-43 DIODE EL1Z 8-719-302-43 DIODE EL1Z ! 8-719-510-63 DIODE D4SB60L-F
D602 D604 D605 D606 D607
! 8-719-510-35 DIODE D2SBA60F 8-719-911-19 DIODE 1SS119-25 8-719-979-50 DIODE EGP30D 8-719-063-74 DIODE D1NL20U-TR2 8-719-911-19 DIODE 1SS119-25
D608 D609 D610 D611 D612
8-719-110-49 ZENER DIODE RD18ES-B2 8-719-064-47 DIODE RN1Z-LF-B1 8-719-064-47 DIODE RN1Z-LF-B1 8-759-157-40 HTC µPC574J 8-719-312-10 DIODE RU4AM-T3
D613 D614 D615 D616 D617
8-719-978-69 ZENER DIODE DTZ-TT11-16B 8-719-911-19 DIODE 1SS119-25 8-719-911-19 DIODE 1SS119-25 8-719-063-74 DIODE D1NL20U-TR2 8-719-077-12 DIODE RG1C-LFC1
D618 D619 D620 D621 D622
8-719-063-74 DIODE D1NL20U-TR2 8-719-043-76 DIODE AK04V0 8-719-063-74 DIODE D1NL20U-TR2 8-719-063-70 DIODE D1NL20U 8-719-911-19 DIODE 1SS119-25
D623 D624 D625 D626 D627
8-719-073-01 DIODE MA111-(K8).S0 8-719-109-72 ZENER DIODE RD3.9ES-B2 8-719-067-78 DIODE RN3Z-LF014-302 8-719-948-45 DIODE ERA22-08 8-719-023-07 DIODE D2S6MF
D628 D629 D631 D632 D633
8-719-911-19 DIODE 1SS119-25 8-719-911-19 DIODE 1SS119-25 8-719-073-01 DIODE MA111-(K8).S0 8-719-911-19 DIODE 1SS119-25 8-719-911-19 DIODE 1SS119-25
D634 D635 D636 D637 D638
8-719-110-88 ZENER DIODE RD39ES-B2 8-719-063-70 DIODE D1NL20U 8-719-991-33 DIODE 1SS133T-77 8-719-982-11 ZENER DIODE MTZJ-4.3B 8-719-911-19 DIODE 1SS119-25
D639 D801 D803 D804 D805
8-719-110-09 ZENER DIODE RD8.2ES-B3 8-719-302-43 DIODE EL1Z 8-719-302-43 DIODE EL1Z 8-719-908-03 DIODE GP08D 8-719-921-44 ZENER DIODE MTZJ-5.1C
D807 D810 D811 D812
8-719-908-03 DIODE GP08D 8-719-945-80 DIODE ERC06-15S 8-719-979-85 DIODE EGP20G 8-719-110-14 ZENER DIODE RD9.1ES-B3 1-410-397-21 FERRITE 1-410-397-21 FERRITE 1-410-397-21 FERRITE 1-410-397-21 FERRITE
1.1UH 1.1UH 1.1UH 1.1UH
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------D401 D402 D404 D405
FB601 FB602 FB603 FB604
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
REF. NO. -----------FB605
PART NO. DESCRIPTION ------------------------------1-410-397-21 FERRITE
1.1UH
REMARK -------------
FB606 FB607 FB608 FB609 FB610
1-410-397-21 1-410-397-21 1-410-397-21 1-410-397-21 1-410-397-21
FERRITE FERRITE FERRITE FERRITE FERRITE
1.1UH 1.1UH 1.1UH 1.1UH 1.1UH
FB611 FB613 FB614 FB620
1-410-397-21 1-410-397-21 1-410-397-21 1-410-397-21
FERRITE FERRITE FERRITE FERRITE
1.1UH 1.1UH 1.1UH 1.1UH
IC301 IC401 IC501 IC601 IC602
8-752-090-41 IC CXA2139S 8-752-068-45 IC CXA1855Q 8-759-444-83 IC LA7840L 8-759-471-81 IC PQ05RD11 8-759-678-14 IC MC33364DR2
IC603 8-759-098-24 IC PQ30RV11 IC604 8-759-098-24 IC PQ30RV11 IC605 8-749-921-21 IC SI3120C IC606 ! 8-749-016-20 IC STR-F6654-LF1357 IC607 ! 8-749-016-19 IC SE135N-LF4 IC608 IC609 IC610 IC611 IC801
8-759-459-99 IC PQ09RD11 8-759-098-24 IC PQ30RV11 8-759-098-24 IC PQ30RV11 8-759-198-31 IC uPC1093J-1-T 8-759-659-67 IC LA6393DLL
J401
1-695-551-11 SOCKET 21P
JR2 JR3 JR4 JR5 JR6
1-216-295-11 1-216-295-11 1-216-296-91 1-216-295-11 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR7 JR9 JR10 JR12 JR13
1-216-295-11 SHORT 1-216-296-91 SHORT 1-216-295-11 SHORT 1-216-295-11 SHORT 1-216-296-91 SHORT
0 0 0 0 0
JR14 JR15 JR16 JR17 JR18
1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR19 JR20 JR23 JR24
1-216-296-91 1-216-296-91 1-216-295-11 1-216-295-11
SHORT SHORT SHORT SHORT
0 0 0 0
JR25 JR26 JR130
1-216-295-11 SHORT 1-216-295-11 SHORT 1-216-295-11 SHORT
0 0 0
L102 L103 L104 L105 L106
1-408-611-31 1-408-611-31 1-412-002-31 1-412-002-31 1-408-607-31
INDUCTOR 47UH INDUCTOR 47UH INDUCTOR CHIP 4.7UH INDUCTOR CHIP 4.7UH INDUCTOR 22UH
L107 L108 L302 L303 L304
1-412-002-31 1-412-002-31 1-414-856-11 1-414-856-11 1-410-396-41
INDUCTOR CHIP 4.7UH INDUCTOR CHIP 4.7UH INDUCTOR 10UH INDUCTOR 10UH FERRITE 0.45UH
– 84 –
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
PART NO. DESCRIPTION ------------------------------1-408-615-31 INDUCTOR 100UH 1-408-599-31 INDUCTOR 4.7UH 1-414-856-11 INDUCTOR 10UH 1-412-533-21 INDUCTOR 47UH 1-412-525-31 INDUCTOR 10UH
L602 L603 L604 L605 L801
1-412-533-21 INDUCTOR 47UH 1-412-525-31 INDUCTOR 10UH 1-406-983-11 INDUCTOR 1MH 1-412-534-31 INDUCTOR 56UH 1-412-531-31 INDUCTOR 33UH
L802 L802 L803 L804 L805 L805 L808 L808
REMARK -------------
REF. NO. -----------R107 R108 R109 R110
PART NO. ------------1-216-025-11 1-216-025-11 1-216-025-11 1-216-069-00
DESCRIPTION ------------------RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 100 100 6.8K
5% 5% 5% 5%
REMARK ------------1/10W 1/10W 1/10W 1/10W
R111 R118 R119 R120 R121
1-216-121-11 1-216-033-00 1-216-105-91 1-216-081-00 1-216-073-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1M 220 220K 22K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R122 R123 R124 R125 R126
1-216-073-00 1-216-077-91 1-216-033-00 1-216-081-00 1-216-105-91
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 15K 220 22K 220K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R127 R128 R129 R151 R152
1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP 1-216-077-91 RES-CHIP 1-216-295-11 SHORT 1-163-021-91 CERAMIC CHIP
10K 10K 15K 0 0.01UF
5% 5% 5%
1/10W 1/10W 1/10W
R159 R160 R301
1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-085-00 RES-CHIP
100 100 33K
R301
1-216-057-00 RES-CHIP
2.2K
R303
1-216-073-00 RES-CHIP
10K
R304 R305 R306
1-216-025-11 RES-CHIP 1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP
100 10K 10K
R307 R308
1-216-081-00 RES-CHIP 1-216-073-00 RES-CHIP
22K 10K
R309 R311
1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP
10K 10K
R312 R313 R314
1-216-675-91 METAL CHIP 1-216-061-00 RES-CHIP 1-216-025-11 RES-CHIP
10K 3.3K 100
5% 1/10W 5% 1/10W (21inch model) 0.50% 1/10W 5% 1/10W 5% 1/10W
R315 R316 R317 R318 R319
1-216-025-11 1-216-025-11 1-216-025-11 1-216-025-11 1-216-025-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R320 R321 R322 R323 R324
1-216-049-11 1-216-025-11 1-216-041-00 1-216-049-11 1-216-025-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1K 100 470 1K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R325 R326 R327 R328 R329
1-216-041-00 1-216-049-11 1-216-025-11 1-216-041-00 1-216-049-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
470 1K 100 470 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R330 R331 R332 R334 R335
1-216-025-11 1-216-065-91 1-216-085-00 1-216-057-00 1-247-807-31
RES-CHIP RES-CHIP RES-CHIP RES-CHIP CARBON
100 4.7K 33K 2.2K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/4W
R336 R337 R338 R340 R341
1-216-057-00 1-216-057-00 1-216-057-00 1-216-097-11 1-247-807-31
RES-CHIP RES-CHIP RES-CHIP RES-CHIP CARBON
2.2K 2.2K 2.2K 100K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/4W
R342 R343 R344 R346 R347
1-216-025-11 1-247-807-31 1-216-077-91 1-216-073-00 1-216-049-11
RES-CHIP CARBON RES-CHIP RES-CHIP RES-CHIP
100 100 15K 10K 1K
5% 5% 5% 5% 5%
1/10W 1/4W 1/10W 1/10W 1/10W
R349
1-216-295-11 SHORT
! 1-419-551-11 COIL, HORIZONTAL LINEARITY (14inch model) ! 1-419-552-11 COIL, HORIZONTAL LINEARITY (21inch model) 1-406-677-11 INDUCTOR 10MH 1-412-553-11 INDUCTOR 3.3MH 1-406-989-21 INDUCTOR 10MH (14inch model) 1-459-111-00 INDUCTOR 10MH 1-406-984-11 INDUCTOR 1.5MH 1-419-263-11 COIL, WITH CORE
(21inch model) (14inch model) (21inch model)
PH601 ! 8-749-016-21 PHOTO COUPLER TCET1103G PH602 ! 8-749-016-21 PHOTO COUPLER TCET1103G PS601 PS602 PS603 PS604
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------L401 L402 L403 L501 L601
! 1-532-686-91 LINK, IC (2.7A/150V) ! 1-532-686-91 LINK, IC (2.7A/150V) ! 1-532-686-91 LINK, IC (2.7A/150V) ! 1-532-686-91 LINK, IC (2.7A/150V)
Q101 Q102 Q301 Q302 Q303
8-729-026-50 TRANSISTOR 2SA1037AK-T-146-QR 8-729-026-50 TRANSISTOR 2SA1037AK-T-146-QR 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q304 Q305 Q306 Q401 Q402
8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (21inch model) 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-216-22 TRANSISTOR 2SA1162-G 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q403 Q404 Q405 Q501 Q502
8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-216-22 TRANSISTOR 2SA1162-G 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-421-22 TRANSISTOR UN2211 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q601 Q602 Q603 Q604 Q605
8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-026-50 TRANSISTOR 2SA1037AK-T-146-QR 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-053-40 TRANSISTOR 2SK2733(LBS4SONY)
Q606 Q608 Q609 Q611 Q612
8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-200-17 TRANSISTOR 2SA1091-O 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q801 Q802 Q803
8-729-038-82 TRANSISTOR 2SK2251-01 8-729-051-82 TRANSISTOR BU4508DX-ON5210 8-729-038-82 TRANSISTOR 2SK2251-01
R101 R102 R103 R104 R105
1-216-069-00 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP
6.8K 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R106
1-216-025-11 RES-CHIP
100
5%
1/10W
A
– 85 –
0
10.00% 50V 5% 1/10W 5% 1/10W 5% 1/10W (14inch model) 5% 1/10W (21inch model) 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W (21inch model) 5% 1/10W 5% 1/10W (21inch model)
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
A PART NO. DESCRIPTION ------------------------------1-216-077-91 RES-CHIP 1-216-073-00 RES-CHIP 1-216-041-00 RES-CHIP 1-216-041-00 RES-CHIP
15K 10K 470 470
5% 5% 5% 5%
REMARK ------------1/10W 1/10W 1/10W 1/10W
R354 R355 R357 R358 R359
1-216-041-00 RES-CHIP 1-216-041-00 RES-CHIP 1-216-057-00 RES-CHIP 1-216-059-00 RES-CHIP 1-216-073-00 RES-CHIP
470 470 2.2K 2.7K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R364 R365 R401 R402 R403
1-216-045-00 RES-CHIP 1-216-073-00 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-033-00 RES-CHIP
680 10K 100 100 220
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R404 R405 R406 R407 R408
1-216-057-00 RES-CHIP 1-216-295-11 SHORT 1-216-033-00 RES-CHIP 1-216-053-00 RES-CHIP 1-216-033-00 RES-CHIP
2.2K 0 220 1.5K 220
5%
1/10W
5% 5% 5%
1/10W 1/10W 1/10W
R409 R410 R411 R412 R413
1-216-057-00 RES-CHIP 1-216-089-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-022-00 RES-CHIP
2.2K 47K 100 100 75
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R414 R415 R416 R417 R418
1-216-022-00 RES-CHIP 1-216-022-00 RES-CHIP 1-216-022-00 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP
75 75 75 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R419 R420 R421 R422 R423
1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-022-00 RES-CHIP 1-216-067-00 RES-CHIP 1-216-081-00 RES-CHIP
100 100 75 5.6K 22K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R424 R425 R426 R427 R428
1-247-804-11 CARBON 1-216-113-00 RES-CHIP 1-216-067-00 RES-CHIP 1-216-037-00 RES-CHIP 1-216-081-00 RES-CHIP
75 470K 5.6K 330 22K
5% 5% 5% 5% 5%
1/4W 1/10W 1/10W 1/10W 1/10W
R429 R431 R432 R434 R435
1-216-037-00 RES-CHIP 1-216-065-91 RES-CHIP 1-216-057-00 RES-CHIP 1-216-097-11 RES-CHIP 1-216-057-00 RES-CHIP
330 4.7K 2.2K 100K 2.2K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R436 R437 R438 R439 R441
1-216-095-00 RES-CHIP 1-216-057-00 RES-CHIP 1-216-067-00 RES-CHIP 1-216-067-00 RES-CHIP 1-216-025-11 RES-CHIP
82K 2.2K 5.6K 5.6K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R442 R443 R444 R445 R446
1-216-033-00 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-249-413-11 CARBON 1-216-041-00 RES-CHIP
220 100 100 470 470
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/4W 1/10W
R447 R448 R449 R502 R503
1-216-025-11 RES-CHIP 1-216-089-11 RES-CHIP 1-216-089-11 RES-CHIP 1-216-089-11 RES-CHIP 1-216-081-00 RES-CHIP
100 47K 47K 47K 22K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R504 R507 R508 R510 R512
1-216-097-11 RES-CHIP 1-216-049-11 RES-CHIP 1-216-049-11 RES-CHIP 1-216-097-11 RES-CHIP 1-215-888-00 METAL OXIDE
100K 1K 1K 100K 220
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 2W
R513 R514 R515 R516 R517
1-216-065-91 RES-CHIP 1-216-073-00 RES-CHIP 1-216-377-11 METAL OXIDE 1-249-385-11 CARBON 1-216-065-91 RES-CHIP
4.7K 10K 4.7 2.2 4.7K
5% 5% 5% 5% 5%
1/10W 1/10W 2W 1/4W 1/10W
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------R350 R351 R352 R353
REF. NO. -----------R518 R519 R520 R601 R602 R603 R605 R606 R607 R608
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
PART NO. DESCRIPTION ------------------------------1-216-073-00 RES-CHIP 1-249-382-11 CARBON 1-216-089-11 RES-CHIP 1-216-033-00 RES-CHIP 1-216-689-11 METAL CHIP ! 1-218-265-21 METAL ! 1-220-778-11 FUSIBLE 1-247-895-91 CARBON 1-216-683-11 METAL CHIP 1-216-077-91 RES-CHIP
10K 1.2 47K 220 39K
5% 5% 5% 5% 0.50%
REMARK ------------1/10W 1/4W 1/10W 1/10W 1/10W
8.2M 0.1 470K 22K 15K
5% 10% 5% 0.50% 5%
1W 1/2W 1/4W 1/10W 1/10W
R609 R610 R611 R612 R613
1-215-917-11 METAL OXIDE 1-216-654-11 METAL CHIP 1-216-077-91 RES-CHIP 1-249-480-11 CARBON 1-216-037-00 RES-CHIP
1K 1.3K 15K 3.3 330
5% 0.50% 5% 5% 5%
3W 1/10W 1/10W 1/2W 1/10W
R614 R615 R616 R617 R618
1-249-417-11 1-216-073-00 1-249-417-11 1-216-049-11 1-216-049-11
CARBON RES-CHIP CARBON RES-CHIP RES-CHIP
1K 10K 1K 1K 1K
5% 5% 5% 5% 5%
1/4W 1/10W 1/4W 1/10W 1/10W
R619 R620 R621 R622 R623
1-216-073-00 1-216-077-91 1-249-401-11 1-216-073-00 1-216-049-11
RES-CHIP RES-CHIP CARBON RES-CHIP RES-CHIP
10K 15K 47 10K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/4W 1/10W 1/10W
R624 R625 R626 R627 R628
1-216-057-00 1-216-041-00 1-216-065-91 1-249-377-11 1-216-017-91
RES-CHIP RES-CHIP RES-CHIP CARBON RES-CHIP
2.2K 470 4.7K 0.47 47
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/4W 1/10W
R629 R630 R631 R632 R633
1-216-049-11 1-247-903-00 1-216-013-00 1-216-081-00 1-216-077-91
RES-CHIP CARBON RES-CHIP RES-CHIP RES-CHIP
1K 1M 33 22K 15K
5% 5% 5% 5% 5%
1/10W 1/4W 1/10W 1/10W 1/10W
R634 R635 R636 R637 R638
1-216-049-11 RES-CHIP 1-216-077-91 RES-CHIP 1-215-927-00 METAL OXIDE 1-216-009-91 RES-CHIP 1-249-405-11 CARBON
1K 15K 47K 22 100
5% 5% 5% 5% 5%
1/10W 1/10W 3W 1/10W 1/4W
R639 R640 R641 R642 R643
1-216-055-00 RES-CHIP 1-216-061-00 RES-CHIP 1-216-025-11 RES-CHIP 1-216-675-91 METAL CHIP 1-216-695-11 METAL CHIP
1.8K 3.3K 100 10K 68K
5% 5% 5% 0.50% 0.50%
1/10W 1/10W 1/10W 1/4W 1/4W
R644 R645 R646 R647 R648
1-216-057-00 RES-CHIP 1-216-665-11 METAL CHIP 1-216-045-00 RES-CHIP 1-249-389-11 CARBON 1-216-361-00 METAL OXIDE
2.2K 3.9K 680 4.7 0.22
5% 0.50% 5% 5% 5%
1/10W 1/10W 1/10W 1/4W 2W
R649 R650 R651 R652 R653
1-216-361-00 METAL OXIDE 1-216-089-11 RES-CHIP 1-216-013-00 RES-CHIP 1-216-045-00 RES-CHIP 1-216-669-11 METAL CHIP
0.22 47K 33 680 5.6K
5% 5% 5% 5% 0.50%
2W 1/10W 1/10W 1/10W 1/10W
R655 R656 R657 R658 R659
1-216-073-00 1-216-077-91 1-215-469-00 1-216-073-00 1-216-077-91
RES-CHIP RES-CHIP METAL RES-CHIP RES-CHIP
10K 15K 100K 10K 15K
5% 5% 1% 5% 5%
1/10W 1/10W 1/4W 1/10W 1/10W
R660 R661 R662 R663 R665
1-216-033-00 1-216-033-00 1-249-409-11 1-249-409-11 1-260-123-11
RES-CHIP RES-CHIP CARBON CARBON CARBON
220 220 220 220 100K
5% 5% 5% 5% 5%
1/10W 1/10W 1/4W 1/4W 1/2W
R666 R667 R668 R669 R670
1-216-057-00 RES-CHIP 1-216-051-00 RES-CHIP 1-216-488-11 METAL OXIDE 1-216-665-11 METAL CHIP 1-216-679-11 METAL CHIP
2.2K 1.2K 18K 3.9K 15K
5% 5% 5% 0.50% 0.50%
1/10W 1/10W 3W 1/10W 1/10W
– 86 –
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
PART NO. DESCRIPTION ------------------------------1-216-033-00 RES-CHIP 1-216-113-00 RES-CHIP 1-216-488-11 METAL OXIDE 1-216-049-11 RES-CHIP 1-216-101-00 RES-CHIP
220 470K 18K 1K 150K
5% 5% 5% 5% 5%
R677
1-202-962-11 CEMENTED
3.3
R678 R679 R680 R681
1-216-081-00 RES-CHIP 1-216-368-11 METAL OXIDE 1-247-883-00 CARBON 1-216-065-91 RES-CHIP
22K 0.82 150K 4.7K
5% 10W (14inch model) 5% 1/10W 5% 2W 5% 1/4W 5% 1/10W
R682 R683 R684 R685 R686
1-247-885-00 CARBON 1-247-711-11 CARBON 1-216-073-00 RES-CHIP 1-216-081-00 RES-CHIP 1-216-049-11 RES-CHIP
180K 680 10K 22K 1K
5% 5% 5% 5% 5%
R687 R688 R689 R801
1-216-073-00 RES-CHIP 1-249-435-11 CARBON 1-216-049-11 RES-CHIP 1-218-768-11 METAL CHIP
10K 33K 1K 470K
R801
1-218-764-11 METAL CHIP
330K
5% 1/10W 5% 1/4W 5% 1/10W 0.50% 1/10W (14inch model) 0.50% 1/10W (21inch model)
R802
1-216-447-00 METAL OXIDE
27
R802
1-215-884-11 METAL OXIDE
47
R803 R805
1-249-377-11 CARBON 1-214-775-00 METAL
0.47 82K
R805
1-214-765-00 METAL
33K
R806 R807 R808
1-249-377-11 CARBON 1-215-887-00 METAL OXIDE 1-214-775-00 METAL
0.47 150 82K
R808
1-214-907-00 METAL
56K
R809
1-216-085-00 RES-CHIP
33K
R810
1-216-683-11 METAL CHIP
22K
R811 R812 R814 R816
1-216-057-00 RES-CHIP 1-216-687-11 METAL CHIP 1-216-295-11 SHORT 1-216-687-11 METAL CHIP
2.2K 33K 0 33K
R817 R818 R821 R822 R823
1-216-057-00 RES-CHIP 1-216-681-11 METAL CHIP 1-249-391-11 CARBON 1-249-411-11 CARBON 1-216-677-11 METAL CHIP
2.2K 18K 6.8 330 12K
5% 0.50% 5% 5% 0.50%
R824
1-218-753-11 METAL CHIP
110K
R824
1-216-699-91 METAL CHIP
100K
R825 R826 R827
1-216-073-00 RES-CHIP 1-215-892-11 METAL OXIDE 1-216-073-00 RES-CHIP
10K 1K 10K
0.50% 1/10W (14inch model) 0.50% 1/10W (21inch model) 5% 1/10W 5% 2W 5% 1/10W
R828 R830
1-216-097-11 RES-CHIP 1-216-689-11 METAL CHIP
100K 39K
R830
1-216-691-11 METAL CHIP
47K
R831
1-218-769-11 METAL CHIP
510K
R831
1-216-696-11 METAL CHIP
75K
R832
1-216-675-91 METAL CHIP
10K
R832
1-216-661-11 METAL CHIP
2.7K
R833 R835 R837
1-216-699-91 METAL CHIP 1-216-057-00 RES-CHIP 1-216-683-11 METAL CHIP
100K 2.2K 22K
REMARK ------------1/10W 1/10W 3W 1/10W 1/10W
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------R671 R673 R674 R675 R676
1/4W 1/4W 1/10W 1/10W 1/10W
REF. NO. -----------R838
PART NO. DESCRIPTION ------------------------------1-215-886-11 METAL OXIDE 100
R839 R841 R842 R843
1-216-349-00 METAL OXIDE 1-260-338-51 CARBON 1-215-898-11 METAL OXIDE 1-260-083-11 CARBON
RY601 ! 1-755-198-12 RELAY, AC POWER RY602 ! 1-755-198-12 RELAY, AC POWER RY603 ! 1-755-245-11 RELAY, AC POWER S801
1-572-707-11 SWITCH, LEVER (H-CENT)
T602 T604 T801 T801 T803
! 1-435-635-11 TRANSFORMER, CONVERTER (SRT) ! 1-435-634-11 TRANSFORMER, CONVERTER (SRT) ! 8-598-852-00 TRANSFORMER ASSY, FLYBACK (NX-1912//M) (14inch model) ! 1-453-314-11 TRANSFORMER ASSY, FLYBACK (21inch model) 1-437-210-11 TRANSFORMER, HORIZONTAL DRIVE
TH601 ! 1-803-586-11 THERMISTOR, NTC THP601! 1-809-827-11 THERMISTOR, POSITIVE
5% 1/4W 5% 2W 1% 1/4W (14inch model) 1% 1/2W (21inch model) 5% 1/10W
TU101 TU101 TU101 TU102 TU102
0.50% 1/10W (21inch model) 5% 1/10W 0.50% 1/10W
1/10W 1/10W 1/4W 1/4W 1/10W
1 6.8K 10K 47
REMARK ------------5% 2W (21inch model) 5% 1W 5% 1/2W 5% 2W 5% 1/2W
5% 2W (14inch model) 5% 2W (21inch model) 5% 1/4W 1% 1/4W (14inch model) 1% 1/4W (21inch model)
0.50% 1/10W
A CVM
TU102
8-598-528-00 FRONTEND BTF-EU602 (VTR) (UK model) 8-598-532-00 FRONTEND BTF-EC402 (VTR) (AEP/ESP model) 8-598-536-00 FRONTEND BTF-EF412 (VTR) (FR model) 8-598-528-00 FRONTEND BTF-EU602 (TV) (UK model) 8-598-532-00 FRONTEND BTF-EC402 (TV) (AEP/ESP model) 8-598-536-00 FRONTEND BTF-EF412 (TV)
(FR model)
X301 X302
1-567-504-11 OSCILLATOR, CRYSTAL 1-567-505-11 OSCILLATOR, CRYSTAL
**********************************************************************************
5% 1/10W 0.50% 1/10W (14inch model) 0.50% 1/10W (21inch model) 0.50% 1/10W (14inch model) 0.50% 1/10W (21inch model) 0.50% 1/10W (14inch model) 0.50% 1/10W (21inch model) 0.50% 1/10W 5% 1/10W 0.50% 1/10W
– 87 –
* A-1639-006-ACVM BOARD, COMPLETE (14inch model) ******************************** * A-1639-005-ACVM BOARD, COMPLETE (21inch model) ******************************** 4-352-844-01 PIN, LEAD, COATING (LP701, LP702, LP703) 4-382-854-01 SCREW (M3X8), P, SW (+) (Q1711, Q1712) C701 C702 C702 C703 C703 C704 C705
1-137-043-11 MYLAR 0.0047UF 10.00% 400V 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V (14inch model) 1-163-255-11 CERAMIC CHIP 150PF 5.00% 50V (21inch model) 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V (14inch model) 1-163-255-11 CERAMIC CHIP 150PF 5.00% 50V (21inch model) 1-163-021-91 CERAMIC CHIP 0.01UF 1-163-021-91 CERAMIC CHIP 0.01UF
10.00% 50V 10.00% 50V
CVM
C712 C713 C714 C715 C716
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------C708 C710 C712
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
PART NO. DESCRIPTION REMARK REF. NO. -----------------------------------------------------D1703 1-162-114-00 CERAMIC 0.0047UF 2KV 1-136-189-00 MYLAR 0.1UF 10.00% 250V D1704 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V (14inch model) D1705 D1706 D1707 1-163-255-11 CERAMIC CHIP 150PF 5.00% 50V (21inch model) D1710 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V D1711 1-104-665-11 ELECT 100UF 20.00% 16V D1801 1-163-113-00 CERAMIC CHIP 68PF 5.00% 50V (21inch model) D1802 D1803 1-163-113-00 CERAMIC CHIP 68PF 5.00% 50V (21inch model)
C717 C718 C719 C720
1-163-005-11 CERAMIC CHIP 1-163-005-11 CERAMIC CHIP 1-163-005-11 CERAMIC CHIP 1-163-113-00 CERAMIC CHIP
470PF 470PF 470PF 68PF
C723
1-163-251-11 CERAMIC CHIP 100PF
C724 C725 C1701 C1702
1-163-251-11 CERAMIC CHIP 1-163-251-11 CERAMIC CHIP 1-104-665-11 ELECT 1-163-235-11 CERAMIC CHIP
100PF 100PF 100UF 22PF
C1703
1-126-925-11 ELECT
470UF
5.00% 50V 5.00% 50V 20.00% 16V 5.00% 50V (21inch model) 20.00% 10V
C1704 C1705 C1706 C1709 C1710
1-163-021-91 CERAMIC CHIP 1-163-239-11 CERAMIC CHIP 1-126-925-11 ELECT 1-126-964-11 ELECT 1-106-375-12 MYLAR
0.01UF 33PF 470UF 10UF 0.022UF
10.00% 5.00% 20.00% 20.00% 10.00%
50V 50V 10V 50V 250V
C1711 C1712 C1713 C1715 C1716
1-106-375-12 MYLAR 1-136-203-11 MYLAR 1-104-664-11 ELECT 1-104-999-11 MYLAR 1-107-639-11 ELECT
0.022UF 0.01UF 47UF 0.1UF 47UF
10.00% 10.00% 20.00% 5.00% 20.00%
250V 250V 25V 200V 160V
C1717 C1803
1-104-664-11 ELECT 47UF 1-163-033-91 CERAMIC CHIP 0.022UF
C1804
1-164-346-11 CERAMIC CHIP 1UF
CN702 1-695-915-11 TAB (CONTACT) CN703 * 1-564-509-11 PLUG, CONNECTOR 6P CN706 1-695-915-11 TAB (CONTACT) CN707 * 1-564-508-11 PLUG, CONNECTOR 5P CN1703 * 1-564-506-11 PLUG, CONNECTOR 3P CN1705 * 1-564-509-11 PLUG, CONNECTOR 6P CN1801 * 1-564-506-11 PLUG, CONNECTOR 3P D702 D703 D704 D705 D706
8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17
D707 D708 D709 D710 D711
8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17
D712 D714 D715 D716 D717
8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17
D718 D719 D721 D722
8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17
10.00% 50V 10.00% 50V 10.00% 50V 5.00% 50V (21inch model) 5.00% 50V
20.00% 25V 50V (21inch model) 16V (21inch model)
PART NO. DESCRIPTION ------------------------------8-719-988-61 DIODE 1SS355TE-17
REMARK -------------
1-216-295-11 SHORT 0 1-216-295-11 SHORT 0 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 8-719-109-89 ZENER DIODE RD5.6ESB2 8-719-109-89 8-719-977-28 8-719-977-28 8-719-977-28
ZENER DIODE RD5.6ESB2 ZENER DIODE DTZ10B ZENER DIODE DTZ10B ZENER DIODE DTZ10B
(21inch model) (21inch model) (21inch model)
F1701 ! 1-576-470-21 LINK, FUSE (6.3A) FB1701
1-412-911-11 FERRITE
0UH
IC1801
8-759-603-37 IC M5216P
(21inch model)
J701
! 1-251-595-11 SOCKET, PICTURE TUBE
L701 L702 L703 L703 L704
1-412-947-11 1-412-947-11 1-412-530-31 1-412-533-21 1-414-183-41
INDUCTOR 4.7UH INDUCTOR 4.7UH INDUCTOR 27UH INDUCTOR 47UH INDUCTOR 10UH
(21inch model) (21inch model) (14inch model) (21inch model)
L705 L706 L1701 L1703 L1704
1-412-947-11 INDUCTOR 4.7UH 1-414-183-41 INDUCTOR 10UH 1-414-183-41 INDUCTOR 10UH 1-412-953-11 INDUCTOR 15UH 1-412-545-11 INDUCTOR 470UH
(21inch model) (21inch model)
Q701 Q702 Q703 Q704 Q705
8-729-046-28 8-729-120-28 8-729-046-28 8-729-200-17 8-729-120-28
TRANSISTOR BF420-126 TRANSISTOR 2SC1623-L5L6 TRANSISTOR BF420-126 TRANSISTOR 2SA1091-O TRANSISTOR 2SC1623-L5L6
Q706 Q707 Q708 Q709 Q710
8-729-046-28 8-729-200-17 8-729-120-28 8-729-046-28 8-729-200-17
TRANSISTOR BF420-126 TRANSISTOR 2SA1091-O TRANSISTOR 2SC1623-L5L6 TRANSISTOR BF420-126 TRANSISTOR 2SA1091-O
Q711 Q712 Q713 Q714 Q715
8-729-120-28 8-729-046-28 8-729-046-28 8-729-026-49 8-729-200-17
TRANSISTOR 2SC1623-L5L6 TRANSISTOR BF420-126 TRANSISTOR BF420-126 TRANSISTOR 2SA1037AK-T146-R TRANSISTOR 2SA1091-O
Q716 Q717 Q1701 Q1704 Q1705
8-729-200-17 TRANSISTOR 2SA1091-O 8-729-200-17 TRANSISTOR 2SA1091-O 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-120-28 TRANSISTOR 2SC1623-L5L6 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q1706 Q1707 Q1708 Q1709 Q1710
8-729-119-78 TRANSISTOR 2SC2785-HFE 8-729-119-78 TRANSISTOR 2SC2785-HFE 8-729-026-39 TRANSISTOR 2SA933AS-QT 8-729-049-09 TRANSISTOR BC327-25 8-729-049-10 TRANSISTOR BC337-25
Q1711 Q1712
8-729-017-05 TRANSISTOR 2SA1837 8-729-017-06 TRANSISTOR 2SC4793
(21inch model)
– 88 –
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
PART NO. -------------
DESCRIPTION ------------------
REMARK ------------1/4W 2W 1/4W 1W 1/10W
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. ------------
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
R701 R702 R703 R705 R706
1-247-895-91 CARBON 1-215-900-11 METAL OXIDE 1-247-807-31 CARBON 1-215-871-11 METAL OXIDE 1-216-033-00 RES-CHIP
470K 22K 100 2.2K 220
5% 5% 5% 5% 5%
R707
1-216-043-91 RES-CHIP
560
R707
1-216-039-00 RES-CHIP
390
R708 R709 R710
1-216-017-91 RES-CHIP 1-216-049-11 RES-CHIP 1-216-113-00 RES-CHIP
47 1K 470K
5% 1/10W (14inch model) 5% 1/10W (21inch model) 5% 1/10W 5% 1/10W 5% 1/10W
R712 R713 R714 R715 R716
1-215-871-11 METAL OXIDE 1-216-113-00 RES-CHIP 1-215-900-11 METAL OXIDE 1-247-807-31 CARBON 1-216-033-00 RES-CHIP
2.2K 470K 22K 100 220
5% 5% 5% 5% 5%
R717
1-216-043-91 RES-CHIP
560
R717
1-216-039-00 RES-CHIP
390
R718 R719 R721
1-202-814-11 SOLID 1-216-017-91 RES-CHIP 1-247-807-31 CARBON
33K 47 100
5% 1/10W (14inch model) 5% 1/10W (21inch model) 10% 1/2W 5% 1/10W 5% 1/4W
R722 R723 R725 R726 R727
1-216-049-11 RES-CHIP 1-216-049-11 RES-CHIP 1-216-065-91 RES-CHIP 1-215-871-11 METAL OXIDE 1-216-033-00 RES-CHIP
1K 1K 4.7K 2.2K 220
5% 5% 5% 5% 5%
R729
1-216-043-11 RES-CHIP
560
R729
1-216-039-00 RES-CHIP
390
R730 R732 R733
1-216-017-91 RES-CHIP 1-216-121-91 RES-CHIP 1-216-097-11 RES-CHIP
47 1M 100K
5% 1/10W (14inch model) 5% 1/10W (21inch model) 5% 1/10W 5% 1/10W 5% 1/10W
R734 R736 R737 R741 R746
1-247-807-31 CARBON 1-215-900-11 METAL OXIDE 1-216-117-00 RES-CHIP 1-202-549-00 SOLID 1-216-049-11 RES-CHIP
100 22K 680K 100 1K
5% 5% 5% 20% 5%
1/4W 2W 1/10W 1/2W 1/10W
R750 R751 R1701 R1702 R1703
1-216-049-11 RES-CHIP 1-216-049-11 RES-CHIP 1-216-033-00 RES-CHIP 1-216-049-11 RES-CHIP 1-247-807-31 CARBON
1K 1K 220 1K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/4W
R1704 R1705 R1706 R1707 R1708
1-247-807-31 CARBON 1-216-049-11 RES-CHIP 1-216-049-11 RES-CHIP 1-249-436-11 CARBON 1-249-436-11 CARBON
100 1K 1K 39K 39K
5% 5% 5% 5% 5%
1/4W 1/10W 1/10W 1/4W 1/4W
R1709 R1710 R1711 R1712 R1713
1-216-025-11 RES-CHIP 1-216-057-00 RES-CHIP 1-216-065-91 RES-CHIP 1-216-041-00 RES-CHIP 1-216-065-91 RES-CHIP
100 2.2K 4.7K 470 4.7K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R1714 R1715 R1716 R1717 R1718
1-216-019-00 RES-CHIP 1-216-029-00 RES-CHIP 1-216-031-00 RES-CHIP 1-216-053-00 RES-CHIP 1-260-091-11 CARBON
56 150 180 1.5K 220
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/2W
R1719 R1721 R1722 R1723 R1724
1-216-051-00 RES-CHIP 1-216-051-00 RES-CHIP 1-216-065-91 RES-CHIP 1-216-107-00 RES-CHIP 1-216-107-00 RES-CHIP
1.2K 1.2K 4.7K 270K 270K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R1725 R1726 R1727
1-216-065-91 RES-CHIP 1-249-433-11 CARBON 1-249-407-11 CARBON
4.7K 22K 150
5% 5% 5%
1/10W 1/4W 1/4W
1W 1/10W 2W 1/4W 1/10W
1/10W 1/10W 1/10W 1W 1/10W
CVM
REF. NO. -----------R1728 R1729
PART NO. ------------1-249-407-11 1-249-387-11
DESCRIPTION ------------------CARBON CARBON
150 3.3
5% 5%
REMARK ------------1/4W 1/4W
R1730 R1731 R1732 R1801
1-249-387-11 1-216-487-11 1-215-867-00 1-216-049-11
CARBON METAL OXIDE METAL OXIDE RES-CHIP
3.3 12K 470 1K
R1802
1-216-049-11 RES-CHIP
1K
5% 1/4W 5% 3W 5% 1W 5% 1/10W (21inch model) 5% 1/10W (21inch model)
R1805
1-216-073-00 RES-CHIP
10K
R1806
1-216-117-00 RES-CHIP
680K
R1807
1-216-073-00 RES-CHIP
10K
R1808
1-216-073-00 RES-CHIP
10K
R1809
1-216-073-00 RES-CHIP
10K
R1810
1-216-073-00 RES-CHIP
10K
5% 1/10W (21inch model) 5% 1/10W (21inch model) 5% 1/10W (21inch model) 5% 1/10W (21inch model) 5% 1/10W (21inch model) 5% 1/10W (21inch model)
RV702 ! 1-241-656-21 RES, ADJ, METAL FILM 110M (H-STAT)
**********************************************************************************
– 89 –
MA10
C001 C002 C004 C005 C006 C007 C008 C009 C010 C013 C014 C015 C016 C017 C018 C019 C021 C022 C024 C025 C033 C099 C208 C209 C210 C211 C214 C216 C217 C218 C219 C220 C258 C259 C260 C262 C263 C401 C402 C405 C406 C407 C408 C409 C410 C412 C413 C414
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
VIDEO BLOCK
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. ------------
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
PART NO. DESCRIPTION REMARK REF. NO. -----------------------------------------------------* A-1635-042-AMA10 BOARD, COMPLETE C415 (KV-14/21FV1D,-14/21FV1U) C416 ********************************* C417 * A-1635-043-AMA10 BOARD, COMPLETE (KV-14/21FV1E) C418 ********************************* C419 C421 * A-1635-044-AMA10 BOARD, COMPLETE (KV-14/21FV1B) C422 ********************************* C424 3-960-273-11 SPACER, TOP END (Q452, Q453) C425 * 3-960-274-01 SPACER, LED (D451) C430 4-352-844-01 PIN, LEAD, COATING (LP001, LP002) C431 * 4-374-846-01 COVER, CAPACITOR, CAP TYPE (VDR601) C432 4-382-854-01 SCREW (M3X8), P, SW (+) (IC201) C435 C436 C441 C455 1-163-104-00 CERAMIC CHIP 30PF 5.00% 50V C456 1-163-235-11 CERAMIC CHIP 22PF 5.00% 50V 1-163-031-11 CERAMIC CHIP 0.01UF 50V C457 1-163-009-11 CERAMIC CHIP 0.001UF 10.00% 50V C458 1-163-241-11 CERAMIC CHIP 39PF 5.00% 50V C460 C701 1-163-241-11 CERAMIC CHIP 39PF 5.00% 50V C702 1-107-823-11 CERAMIC CHIP 0.47UF 10.00% 16V 1-163-009-11 CERAMIC CHIP 0.001UF 10.00% 50V C705 1-163-989-11 CERAMIC CHIP 0.033UF 10.00% 25V C706 (except ESP model) C707 1-126-964-11 ELECT 10UF 20.00% 50V C709 C711 1-163-038-11 CERAMIC CHIP 0.1UF 25V C712 1-124-584-00 ELECT 100UF 20.00% 10V C713 1-163-037-11 CERAMIC CHIP 0.022UF 10.00% 50V (except ESP model) C716 C717 1-163-255-11 CERAMIC CHIP 150PF 5.00% 50V (except ESP model) C718 1-163-809-11 CERAMIC CHIP 0.047UF 10.00% 25V (except ESP model) C719 C720 C722 1-163-989-11 CERAMIC CHIP 0.033UF 10.00% 25V (except ESP model) C723 C724 1-163-009-11 CERAMIC CHIP 0.001UF 10.00% 50V 1-163-009-11 CERAMIC CHIP 0.001UF 10.00% 50V C725 1-163-259-91 CERAMIC CHIP 220PF 5.00% 50V C726 1-163-259-91 CERAMIC CHIP 220PF 5.00% 50V C727 C728 1-124-584-00 ELECT 100UF 20.00% 10V (except ESP model) C801 1-163-038-11 CERAMIC CHIP 0.1UF 25V (except ESP model) C804 C807 1-126-963-11 ELECT 4.7UF 20.00% 50V C808 1-124-252-00 ELECT 0.33UF 20.00% 50V C813 1-163-031-11 CERAMIC CHIP 0.01UF 50V C815 1-119-821-11 ELECT MELF 2.2UF 20% 50V C816 1-104-666-11 ELECT 220UF 20.00% 25V 1-126-964-11 ELECT 10UF 20.00% 50V C817 C818 1-126-959-11 ELECT 0.47UF 20.00% 50V 1-126-942-61 ELECT 1000UF 20.00% 25V C819 C820 1-163-038-11 CERAMIC CHIP 0.1UF 25V 1-126-942-61 ELECT 1000UF 20.00% 25V C822 C823 1-163-038-11 CERAMIC CHIP 0.1UF 25V C824 1-107-791-11 DOUBLE LAYER 0.33F 5.5V C825 1-104-665-11 ELECT 100UF 20.00% 10V C828 1-163-091-00 CERAMIC CHIP 8PF 0.25PF 50V C829 1-163-091-00 CERAMIC CHIP 8PF 0.25PF 50V C832 1-163-035-00 CERAMIC CHIP 0.047UF 50V C834 1-104-664-11 ELECT 47UF 20.00% 10V C835 1-104-664-11 ELECT 47UF 20.00% 16V C837 1-163-031-11 CERAMIC CHIP 0.01UF 50V C840 1-163-031-11 CERAMIC CHIP 0.01UF 50V C841 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V C842 1-104-664-11 ELECT 47UF 20.00% 10V C843 1-163-035-00 CERAMIC CHIP 0.047UF 50V C844 1-126-960-11 ELECT 1UF 20.00% 50V C845 1-163-263-11 CERAMIC CHIP 330PF 5.00% 50V C846 1-104-664-11 ELECT 47UF 20.00% 10V
– 90 –
PART NO. DESCRIPTION ------------------------------1-130-489-00 MYLAR 0.033UF 1-163-031-11 CERAMIC CHIP 0.01UF
REMARK ------------5.00% 50V 50V
1-128-551-11 ELECT 1-130-488-00 MYLAR 1-126-961-11 ELECT 1-104-665-11 ELECT 1-163-018-00 CERAMIC CHIP
22UF 0.027UF 2.2UF 100UF 0.0056UF
20.00% 5.00% 20.00% 20.00% 10.00%
1-126-960-11 ELECT 1-163-038-11 CERAMIC CHIP 1-163-227-11 CERAMIC CHIP 1-163-231-11 CERAMIC CHIP 1-163-038-11 CERAMIC CHIP
1UF 0.1UF 10PF 15PF 0.1UF
20.00% 50V 25V 0.50PF 50V 5.00% 50V 25V
1-163-038-11 CERAMIC CHIP 1-124-584-00 ELECT 1-163-031-11 CERAMIC CHIP 1-126-924-11 ELECT 1-163-009-11 CERAMIC CHIP
0.1UF 100UF 0.01UF 330UF 0.001UF
25V 20.00% 10V 50V 20.00% 6.3V 10.00% 50V
1-163-009-11 1-163-009-11 1-163-009-11 1-163-033-91 1-163-031-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.001UF 0.001UF 0.001UF 0.022UF 0.01UF
10.00% 50V 10.00% 50V 10.00% 50V 50V 50V
1-163-033-91 1-163-235-11 1-163-033-91 1-163-241-11 1-163-033-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.022UF 22PF 0.022UF 39PF 0.022UF
50V 5.00% 50V 50V 5.00% 50V 50V
1-163-033-91 1-163-241-11 1-163-033-91 1-163-031-11 1-163-031-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.022UF 39PF 0.022UF 0.01UF 0.01UF
50V 5.00% 50V 50V 50V 50V
1-163-038-11 CERAMIC CHIP 1-104-665-11 ELECT 1-163-038-11 CERAMIC CHIP 1-163-038-11 CERAMIC CHIP 1-104-665-11 ELECT
0.1UF 100UF 0.1UF 0.1UF 100UF
25V 20.00% 10V 25V 25V 20.00% 10V
1-163-038-91 1-163-031-11 1-163-031-11 1-163-031-11 1-164-492-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1UF 0.01UF 0.01UF 0.01UF 0.15UF
25V 50V 50V 50V 10.00% 16V
1-163-241-11 1-163-227-11 1-163-031-11 1-163-251-11 1-163-239-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
39PF 10PF 0.01UF 100PF 33PF
5.00% 50V 0.50PF 50V 50V 5.00% 50V 5.00% 50V
1-163-037-11 1-163-031-11 1-163-031-11 1-163-131-00 1-163-809-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.022UF 0.01UF 0.01UF 390PF 0.047UF
10.00% 50V 50V 50V 5.00% 50V 10.00% 25V
1-128-551-11 ELECT 1-126-960-11 ELECT 1-163-031-11 CERAMIC CHIP 1-163-257-11 CERAMIC CHIP 1-163-031-11 CERAMIC CHIP
22UF 1UF 0.01UF 180PF 0.01UF
20.00% 25V 20.00% 50V 50V 5.00% 50V 50V
1-164-346-11 CERAMIC CHIP 1-164-346-11 CERAMIC CHIP 1-163-038-91 CERAMIC CHIP 1-163-038-91 CERAMIC CHIP 1-104-664-11 ELECT
1UF 1UF 0.1UF 0.1UF 47UF
16V 16V 25V 25V 20.00% 10V
1-104-665-11 ELECT 1-126-964-11 ELECT 1-163-031-11 CERAMIC CHIP 1-104-665-11 ELECT 1-126-964-11 ELECT
100UF 10UF 0.01UF 100UF 10UF
20.00% 10V 20.00% 50V 50V 20.00% 10V 20.00% 50V
1-164-346-11 CERAMIC CHIP 1UF 1-163-021-91 CERAMIC CHIP 0.01UF
16V 10.00% 50V
25V 50V 50V 10V 50V
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
PART NO. DESCRIPTION ------------------------------1-163-038-11 CERAMIC CHIP 0.1UF 1-163-031-11 CERAMIC CHIP 0.01UF 1-126-960-11 ELECT 1UF
C850 C851 C852 C853 C854
1-163-031-11 CERAMIC CHIP 1-163-809-11 CERAMIC CHIP 1-104-664-11 ELECT 1-163-038-11 CERAMIC CHIP 1-126-960-11 ELECT
0.01UF 50V 0.047UF 10.00% 25V 47UF 20.00% 10V 0.1UF 25V 1UF 20.00% 50V
C855 C856 C857 C858 C859
1-163-809-11 CERAMIC CHIP 1-126-960-11 ELECT 1-163-037-11 CERAMIC CHIP 1-126-960-11 ELECT 1-163-038-11 CERAMIC CHIP
0.047UF 1UF 0.022UF 1UF 0.1UF
C860 C861 C862 C863 C864
1-164-346-11 CERAMIC CHIP 1-163-031-11 CERAMIC CHIP 1-163-031-11 CERAMIC CHIP 1-104-664-11 ELECT 1-163-016-00 CERAMIC CHIP
1UF 16V 0.01UF 50V 0.01UF 50V 47UF 20.00% 10V 0.0039UF 10.00% 50V
C865 C866 C867 C868 C879
1-164-004-11 CERAMIC CHIP 1-164-004-11 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP 1-163-235-11 CERAMIC CHIP 1-163-259-91 CERAMIC CHIP
0.1UF 0.1UF 0.01UF 22PF 220PF
10.00% 10.00% 10.00% 5.00% 5.00%
C901 C902 C903 C904 C905
1-163-009-11 CERAMIC CHIP 1-164-346-11 CERAMIC CHIP 1-163-239-11 CERAMIC CHIP 1-163-239-11 CERAMIC CHIP 1-126-925-11 ELECT
0.001UF 1UF 33PF 33PF 470UF
10.00% 50V 16V 5.00% 50V 5.00% 50V 20.00% 10V
C906 C907 C908 C909 C910
1-164-004-11 CERAMIC CHIP 1-164-346-11 CERAMIC CHIP 1-126-925-11 ELECT 1-163-251-11 CERAMIC CHIP 1-164-346-11 CERAMIC CHIP
0.1UF 1UF 470UF 100PF 1UF
10.00% 25V 16V 20.00% 10V 5.00% 50V 16V
C911 C912 C913 C1001 C1002
1-163-009-11 CERAMIC CHIP 1-164-004-11 CERAMIC CHIP 1-164-004-11 CERAMIC CHIP 1-137-397-11 MYLAR 1-163-031-11 CERAMIC CHIP
0.001UF 0.1UF 0.1UF 0.047UF 0.01UF
10.00% 10.00% 10.00% 5.00%
C1003 C1004 C1006 C1007 C1008
1-163-021-91 CERAMIC CHIP 1-104-664-11 ELECT 1-163-021-91 CERAMIC CHIP 1-104-664-11 ELECT 1-126-963-11 ELECT
0.01UF 47UF 0.01UF 47UF 4.7UF
10.00% 20.00% 10.00% 20.00% 20.00%
50V 10V 50V 10V 50V
C1009 C1010 C1011 C1012 C1013
1-126-964-11 ELECT 1-137-150-11 MYLAR 1-163-011-11 CERAMIC CHIP 1-163-011-11 CERAMIC CHIP 1-164-346-11 CERAMIC CHIP
10UF 0.01UF 0.0015UF 0.0015UF 1UF
20.00% 5.00% 10.00% 10.00%
50V 50V 50V 50V 16V
C1014 C1015 C1016 C1017 C1019
1-163-031-11 CERAMIC CHIP 1-126-960-11 ELECT 1-104-664-11 ELECT 1-126-963-11 ELECT 1-104-664-11 ELECT
0.01UF 1UF 47UF 4.7UF 47UF
20.00% 20.00% 20.00% 20.00%
50V 50V 16V 50V 10V
C1020 C1021 C1101 C1102 C1103
1-126-960-11 ELECT 1-126-964-11 ELECT 1-163-009-11 CERAMIC CHIP 1-163-009-11 CERAMIC CHIP 1-163-033-91 CERAMIC CHIP
1UF 10UF 0.001UF 0.001UF 0.022UF
20.00% 20.00% 10.00% 10.00%
50V 50V 50V 50V 50V
0.1UF 0.01UF 0.01UF 0.0068UF 0.1UF
10.00% 10.00% 10.00% 20.00%
25V 50V 50V 50V 300V
C1104 1-163-038-11 CERAMIC CHIP C1105 1-163-021-91 CERAMIC CHIP C1106 1-163-021-91 CERAMIC CHIP C1107 1-163-019-00 CERAMIC CHIP C1701 ! 1-136-516-12 FILM
REMARK ------------25V 50V 20.00% 50V
10.00% 20.00% 10.00% 20.00%
25V 50V 50V 50V 25V
25V 25V 50V 50V 50V
50V 25V 25V 100V 50V
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------C847 C848 C849
MA10
REF. NO. -----------C1803
PART NO. DESCRIPTION ------------------------------1-163-259-91 CERAMIC CHIP 220PF
C1804
1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V (FR model) 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V (FR model) 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V (FR model) 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V (FR model) 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V (FR model)
C1702 ! 1-136-516-12 FILM 0.1UF 20.00% 300V C1703 ! 1-113-924-91 CERAMIC 0.0047UF 20.00% 250V C1801 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V (FR model) C1802 1-163-255-11 CERAMIC CHIP 150PF 5.00% 50V (FR model)
– 91 –
C1805 C1806 C1807 C1808 C1809
1-163-009-11 CERAMIC CHIP 0.001UF
C1810
1-163-031-11 CERAMIC CHIP 0.01UF
C1811
1-163-031-11 CERAMIC CHIP 0.01UF
C1812
1-104-664-11 ELECT
C1813
1-163-249-11 CERAMIC CHIP 82PF
C1814
1-163-137-00 CERAMIC CHIP 680PF
C1815
1-163-021-91 CERAMIC CHIP 0.01UF
C1816
1-163-259-91 CERAMIC CHIP 220PF
C1817
1-164-004-11 CERAMIC CHIP 0.1UF
C1818
1-163-037-11 CERAMIC CHIP 0.022UF
C1819
1-126-964-11 ELECT
10UF
C1820
1-126-959-11 ELECT
0.47UF
C1821
1-126-960-11 ELECT
1UF
C1822
1-163-021-91 CERAMIC CHIP 0.01UF
C1824
1-126-961-11 ELECT
C1826
1-163-251-11 CERAMIC CHIP 100PF
47UF
2.2UF
REMARK ------------5.00% 50V (FR model)
10.00% 50V (FR model) 50V (FR model) 50V (FR model) 20.00% 10V (FR model) 5.00% 50V (FR model) 5.00% 50V (FR model) 10.00% 50V (FR model) 5.00% 50V (FR model) 10.00% 25V (FR model) 10.00% 50V (FR model) 20.00% 50V (FR model) 20.00% 50V (FR model) 20.00% 50V (FR model) 10.00% 50V (FR model) 20.00% 50V (FR model) 5.00% 50V (FR model)
CN001 CN002 CN251 CN401 CN403
1-785-386-11 SOCKET, CONNECTOR 35P * 1-766-715-11 CONNECTOR, BOARD TO BOARD 10P * 1-564-506-11 PLUG, CONNECTOR 3P 1-695-328-11 SOCKET, CONNECTOR 5P 1-779-723-11 CONNECTOR, BOARD TO BOARD 9P
CN404 CN701 CN702 CN1001 CN1002
* 1-766-716-11 CONNECTOR, BOARD TO BOARD 3P * 1-695-329-31 PIN, CONNECTOR (PC BOARD) 6P * 1-560-892-00 PIN, CONNECTOR 4P * 1-564-506-11 PLUG, CONNECTOR 3P * 1-569-926-11 SOCKET, CONNECTOR 7P
CN1003 * 1-564-510-11 PLUG, CONNECTOR 7P CN1004 1-784-038-11 CONNECTOR, BOARD TO BOARD 9P CN1701 * 1-580-843-11 PIN, CONNECTOR (POWER) CN1702 * 1-691-291-11 PIN, CONNECTOR (PC BOARD) 5P CN1703 1-695-915-11 TAB (CONTACT) D001 D002 D004 D005 D006
8-719-109-93 ZENER DIODE RD6.2ESB2 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-40 ZENER DIODE MTZJ-4.7C 8-719-921-44 ZENER DIODE MTZJ-5.1C
D007 D008 D009
8-719-911-19 DIODE 1SS119-25 8-719-109-93 ZENER DIODE RD6.2ESB2 8-719-988-61 DIODE 1SS355TE-17
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
MA10 PART NO. DESCRIPTION ------------------------------8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B
D251 D252 D253 D254 D402
8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-911-19 DIODE 1SS119-25
D403 D405 D406 D407 D432
8-719-200-82 DIODE 11ES2 8-719-200-82 DIODE 11ES2 8-719-200-82 DIODE 11ES2 8-719-200-82 DIODE 11ES2 8-719-109-93 ZENER DIODE RD6.2ESB2
D433 D451 D901 D902 D903
8-719-109-93 ZENER DIODE RD6.2ESB2 8-719-048-26 DIODE GL528V1 8-719-109-89 ZENER DIODE RD5.6ESB2 8-719-109-72 ZENER DIODE RD3.9ES-B2 8-719-914-43 DIODE DAN202K
D904 D905 D1101 D1102 D1103
8-719-109-89 ZENER DIODE RD5.6ESB2B 8-719-109-72 ZENER DIODE RD3.9ES-B2 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B
D1104 D1105 D1106 D1107 D1108
8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-921-54 ZENER DIODE MTZJ-6.2B 8-719-109-93 ZENER DIODE RD6.2ESB2 8-719-109-93 ZENER DIODE RD6.2ESB2 8-719-109-93 ZENER DIODE RD6.2ESB2
D1109 D1110
8-719-109-93 ZENER DIODE RD6.2ESB2 8-719-921-54 ZENER DIODE MTZJ-6.2B
F1701 ! 1-576-232-21 FUSE (H.B.C.) (5A/250V) FH1701 * 1-533-725-11 HOLDER, FUSE; F1701 IC001 IC002 IC003 IC005 IC201
8-752-917-77 IC CXP85452-233Q-TL 8-759-527-77 IC M24C16-MN6T 8-759-510-43 IC PST572C 8-759-484-61 IC SDA5650X-GEG 8-759-442-73 IC TDA7494
IC252 IC401 IC402 IC403 IC404
8-759-530-93 IC S-3510ACFJA-TB 8-759-353-59 IC LB1643 8-752-918-13 IC CXP87852-063Q-TL 8-759-702-02 IC NJM062M 8-759-510-73 IC BA10393F-E2
IC405 IC701 IC801 IC802 IC901
8-759-438-83 IC BA6305F-E2 8-759-357-84 IC HA118295NT 8-759-439-50 IC LC89977M-TE-L 8-759-479-25 IC LA71514M-MPB 8-759-689-43 IC SAA5563PS/M3/0189
IC902 IC1001 IC1101 IC1801
8-759-591-02 IC L78L33ABZ-AP 8-759-499-30 IC BA7755AF-E2 8-742-014-21 HYB IC SBX1981-51(21) 8-759-438-17 IC LA7337
1-779-205-11 JACK, PIN 2P (VIDEO/AUDIO IN) 1-568-267-21 JACK (HEADPHONE)
JR001 JR101 JR103 JR109 JR110
1-216-295-11 SHORT 1-216-295-11 SHORT 1-216-295-11 SHORT 1-216-295-11 SHORT 1-216-295-11 SHORT
0 0 0 0 0
REF. NO. -----------JR111 JR112 JR113 JR114 JR115
PART NO. DESCRIPTION ------------------------------1-216-295-11 SHORT 1-216-296-91 SHORT 1-216-296-91 SHORT 1-216-296-91 SHORT 1-216-296-91 SHORT
0 0 0 0 0
REMARK -------------
JR116 JR117 JR118 JR119 JR121
1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91 1-216-295-11
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR122 JR123 JR125 JR126 JR127
1-216-295-11 1-216-296-11 1-216-296-11 1-216-296-11 1-216-295-11
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR136 JR137 JR138 JR140 JR142
1-216-295-11 1-216-295-11 1-216-295-11 1-216-295-11 1-216-295-11
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR143 JR144 JR145 JR146 JR147
1-216-295-11 1-216-295-11 1-216-295-11 1-216-295-11 1-216-295-11
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR148 JR149 JR150 JR151 JR152
1-216-295-11 1-216-295-11 1-216-296-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR153 JR154 JR155 JR156 JR157
1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
JR158 JR159 JR160 JR163 JR164
1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 0
(except ESP model)
J1101 J1102
REMARK -------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------D201 D202
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
(FR model)
L001 L002 L003 L004 L201
1-469-013-31 1-410-509-11 1-414-856-11 1-414-856-11 1-414-856-11
INDUCTOR 18UH INDUCTOR 10UH INDUCTOR 10UH INDUCTOR 10UH INDUCTOR 10UH
L202 L402 L403 L404 L431
1-414-856-11 1-410-509-11 1-414-856-11 1-216-295-11 1-410-509-11
INDUCTOR 10UH INDUCTOR 10UH INDUCTOR 10UH SHORT 0 INDUCTOR 10UH
L703 L704 L801 L803 L804
1-408-615-31 INDUCTOR 100UH 1-408-615-31 INDUCTOR 100UH 1-410-439-11 INDUCTOR 470UH 1-408-977-21 INDUCTOR 39UH 1-408-977-21 INDUCTOR 39UH
L808 L809 L811 L812 L813
1-414-184-41 INDUCTOR 15UH 1-408-615-31 INDUCTOR 100UH 1-414-185-41 INDUCTOR 22UH 1-414-185-41 INDUCTOR 22UH 1-414-187-11 INDUCTOR 47UH
L815 L901 L902 L903 L1001
1-414-190-31 INDUCTOR 120UH 1-414-856-11 INDUCTOR 10UH 1-414-856-11 INDUCTOR 10UH 1-414-856-11 INDUCTOR 10UH 1-408-615-31 INDUCTOR 100UH
L1003 L1004
1-420-872-00 COIL, AIR CORE 1-414-187-11 INDUCTOR 47UH
– 92 –
(except ESP model)
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
L1801 L1802 L1803 L1804 L1806
PART NO. DESCRIPTION ------------------------------1-408-982-11 INDUCTOR 100UH 1-414-177-11 INDUCTOR 1UH 1-414-183-41 INDUCTOR 10UH
REMARK -------------
1-408-968-21 INDUCTOR 6.8UH 1-408-974-21 INDUCTOR 22UH * 1-408-980-21 INDUCTOR 68UH 1-408-975-21 INDUCTOR 27UH 1-408-978-21 INDUCTOR 47UH
8-749-013-23 PHOTO INTERRUPTER GP3S120 8-749-013-23 PHOTO INTERRUPTER GP3S120
PS201 ! 1-532-605-91 LINK, IC (0.4A/150V) Q003 Q005 Q006 Q008 Q009
8-729-421-22 TRANSISTOR UN2211 8-729-421-19 TRANSISTOR UN2213 8-729-421-19 TRANSISTOR UN2213 8-729-421-19 TRANSISTOR UN2213 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q201 Q402 Q451 Q452 Q453
8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-424-18 TRANSISTOR UN2113 8-729-281-53 TRANSISTOR 2SC1815-GR 8-729-042-88 TRANSISTOR RPT-37PB3F 8-729-042-88 TRANSISTOR RPT-37PB3F
Q701 Q801 Q803 Q808 Q809
8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-421-19 TRANSISTOR UN2213
Q812 Q815 Q821 Q822 Q824
8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-216-22 TRANSISTOR 2SA1162-G
Q825 Q830 Q901 Q902 Q903
8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-216-22 TRANSISTOR 2SA1162-G 8-729-216-22 TRANSISTOR 2SA1162-G 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-422-27 TRANSISTOR 2SD601A-Q
Q904 Q1001 Q1002 Q1801 Q1802
8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-802-91 TRANSISTOR 2SD879 8-729-422-27 TRANSISTOR 2SD601A-Q 8-729-216-22 TRANSISTOR 2SA1162-G 8-729-424-56 TRANSISTOR UN211L
(FR model) (FR model)
Q1804 Q1805 Q1806 Q1807 Q1808
8-729-230-49 TRANSISTOR 2SC2712-YG 8-729-230-49 TRANSISTOR 2SC2712-YG 8-729-230-49 TRANSISTOR 2SC2712-YG 8-729-421-19 TRANSISTOR UN2213 8-729-424-08 TRANSISTOR UN2111
(FR model) (FR model) (FR model) (FR model) (FR model)
R001 R004 R005 R006 R007
1-216-049-11 RES-CHIP 1-216-049-11 RES-CHIP 1-216-089-11 RES-CHIP 1-216-041-00 RES-CHIP 1-249-421-11 CARBON
1K 1K 47K 470 2.2K
R009 R011
1-216-049-11 RES-CHIP 1-216-025-11 RES-CHIP
1K 100
R012 R013 R014
1-216-025-11 RES-CHIP 1-216-049-11 RES-CHIP 1-216-049-11 RES-CHIP
100 1K 1K
R015
1-216-049-11 RES-CHIP
1K
REF. NO. -----------R016 R017 R018 R020
PART NO. ------------1-216-049-11 1-216-025-11 1-216-041-00 1-216-025-11
DESCRIPTION ------------------RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1K 100 470 100
5% 5% 5% 5%
REMARK ------------1/10W 1/10W 1/10W 1/10W
R022 R025 R026 R027 R029
1-216-065-91 1-216-073-00 1-216-049-11 1-216-079-00 1-216-049-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
4.7K 10K 1K 18K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R030 R036 R037 R038 R039
1-216-033-00 1-216-025-11 1-216-025-11 1-216-025-11 1-216-025-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
220 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R040 R041 R042 R043 R044
1-216-073-00 1-216-065-91 1-216-065-91 1-216-065-91 1-216-065-91
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 4.7K 4.7K 4.7K 4.7K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R045 R046 R047 R048 R049
1-216-295-11 1-216-025-11 1-216-025-11 1-216-045-00 1-216-065-91
SHORT RES-CHIP RES-CHIP RES-CHIP RES-CHIP
0 100 100 680 4.7K
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
R050
1-216-025-11 RES-CHIP
100
R051 R052 R053 R054
1-216-065-91 1-216-073-00 1-216-057-00 1-216-049-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP
4.7K 10K 2.2K 1K
R055 R056 R057 R058 R059
1-216-033-00 1-216-033-00 1-216-049-11 1-216-039-00 1-216-049-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
220 220 1K 390 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R060 R064 R065 R067 R068
1-216-049-11 1-216-049-11 1-216-049-11 1-216-025-11 1-216-025-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1K 1K 1K 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R075 R076 R077 R078 R083
1-216-049-11 1-216-065-91 1-216-089-11 1-216-073-00 1-216-069-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1K 4.7K 47K 10K 6.8K
5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W (except ESP model)
R084 R085 R087
1-216-033-00 RES-CHIP 1-216-049-11 RES-CHIP 1-216-097-11 RES-CHIP
220 1K 100K
R088
1-216-123-11 RES-CHIP
1.2M
R089
1-216-025-11 RES-CHIP
100
5% 1/10W 5% 1/10W 5% 1/10W (except ESP model) 5% 1/10W (except ESP model) 5% 1/10W (except ESP model)
R090
1-216-069-00 RES-CHIP
6.8K
R091
1-216-123-11 RES-CHIP
1.2M
R092
1-216-121-11 RES-CHIP
1M
R093
1-216-057-00 RES-CHIP
2.2K
R095
1-216-295-11 SHORT
0
R096 R097 R098 R100 R101
1-216-069-00 1-216-073-00 1-216-025-11 1-216-073-00 1-216-073-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
6.8K 10K 100 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R204 R205 R206
1-247-807-31 CARBON 1-216-049-11 RES-CHIP 1-216-109-00 RES-CHIP
100 1K 330K
5% 5% 5%
1/4W 1/10W 1/10W
(FR model) (FR model) (FR model) (FR model) (FR model)
PH451 PH452
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------L1102 L1103 L1104
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/4W
5% 1/10W 5% 1/10W (except ESP model) 5% 1/10W 5% 1/10W 5% 1/10W 5%
1/10W
MA10
– 93 –
5% 1/10W (except ESP model) 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W
5% 1/10W (except ESP model) 5% 1/10W (except ESP model) 5% 1/10W (except ESP model) 5% 1/10W (except ESP model) (except ESP model)
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
MA10 PART NO. DESCRIPTION ------------------------------1-216-057-00 RES-CHIP 1-216-073-00 RES-CHIP
2.2K 10K
5% 5%
REMARK ------------1/10W 1/10W
R212 R216 R218 R219 R220
1-216-049-11 RES-CHIP 1-249-385-11 CARBON 1-216-105-91 RES-CHIP 1-216-033-00 RES-CHIP 1-216-065-91 RES-CHIP
1K 2.2 220K 220 4.7K
5% 5% 5% 5% 5%
1/10W 1/4W 1/10W 1/10W 1/10W
R263 R264 R265 R401 R402
1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-295-11 SHORT 1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP
100 100 0 10K 10K
5% 5%
1/10W 1/10W
5% 5%
1/10W 1/10W
R403 R404 R405 R406 R407
1-216-049-11 RES-CHIP 1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP 1-216-053-00 RES-CHIP 1-216-053-00 RES-CHIP
1K 10K 10K 1.5K 1.5K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R408 R409 R410 R411 R412
1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP 1-216-049-11 RES-CHIP 1-216-065-91 RES-CHIP 1-216-057-00 RES-CHIP
10K 10K 1K 4.7K 2.2K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R414 R415 R416 R417 R418
1-216-097-11 RES-CHIP 1-216-097-11 RES-CHIP 1-216-105-91 RES-CHIP 1-216-111-00 RES-CHIP 1-216-097-11 RES-CHIP
100K 100K 220K 390K 100K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R419 R420 R421 R422 R423
1-216-097-11 RES-CHIP 1-216-117-00 RES-CHIP 1-216-079-00 RES-CHIP 1-216-689-11 RES-CHIP 1-216-049-11 RES-CHIP
100K 680K 18K 39K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R424 R425 R426 R427 R428
1-216-675-91 METAL CHIP 1-216-057-00 RES-CHIP 1-216-057-00 RES-CHIP 1-216-103-00 RES-CHIP 1-216-675-91 METAL CHIP
10K 2.2K 2.2K 180K 10K
0.50% 5% 5% 5% 0.50%
1/10W 1/10W 1/10W 1/10W 1/10W
R429 R430 R432 R435 R436
1-216-065-91 RES-CHIP 1-216-037-00 RES-CHIP 1-216-073-00 RES-CHIP 1-216-049-11 RES-CHIP 1-216-043-11 RES-CHIP
4.7K 330 10K 1K 560
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R437 R438 R439 R440 R441
1-216-065-91 RES-CHIP 1-216-295-11 SHORT 1-216-089-11 RES-CHIP 1-216-089-11 RES-CHIP 1-216-089-11 RES-CHIP
4.7K 0 47K 47K 47K
5%
1/10W
5% 5% 5%
1/10W 1/10W 1/10W
R442 R443 R444 R445 R446
1-216-089-11 RES-CHIP 1-216-049-11 RES-CHIP 1-216-295-11 SHORT 1-216-089-11 RES-CHIP 1-216-075-00 RES-CHIP
47K 1K 0 47K 12K
5% 5%
1/10W 1/10W
5% 5%
1/10W 1/10W
R447 R448 R449 R450 R451
1-216-081-00 RES-CHIP 1-216-075-00 RES-CHIP 1-216-081-00 RES-CHIP 1-216-077-91 RES-CHIP 1-216-057-00 RES-CHIP
22K 12K 22K 15K 2.2K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R452 R453 R454 R455 R456
1-249-400-11 CARBON 1-249-400-11 CARBON 1-249-406-11 CARBON 1-216-089-11 RES-CHIP 1-216-089-11 RES-CHIP
39 39 120 47K 47K
5% 5% 5% 5% 5%
1/4W 1/4W 1/4W 1/10W 1/10W
R457 R458 R459 R460 R461
1-216-085-00 RES-CHIP 1-216-085-00 RES-CHIP 1-216-085-00 RES-CHIP 1-216-057-00 RES-CHIP 1-216-085-00 RES-CHIP
33K 33K 33K 2.2K 33K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R465 R468
1-216-045-00 RES-CHIP 1-216-089-11 RES-CHIP
680 47K
5% 5%
1/10W 1/10W
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------R210 R211
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
REF. NO. -----------R470 R471 R472
PART NO. DESCRIPTION ------------------------------1-216-041-00 RES-CHIP 1-216-041-00 RES-CHIP 1-216-041-00 RES-CHIP
470 470 470
5% 5% 5%
REMARK ------------1/10W 1/10W 1/10W
R473 R474 R476 R477 R478
1-216-041-00 1-216-073-00 1-216-049-11 1-216-049-11 1-216-049-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
470 10K 1K 1K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R479 R480 R481 R484 R487
1-216-065-91 1-216-049-11 1-216-049-11 1-216-049-11 1-216-045-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
4.7K 1K 1K 1K 680
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R701 R702 R705 R706 R707
1-216-025-11 1-216-045-00 1-216-055-00 1-216-081-00 1-216-073-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 680 1.8K 22K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R708 R709 R710 R711 R712
1-216-049-11 1-216-061-00 1-216-049-11 1-216-049-11 1-216-049-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1K 3.3K 1K 1K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R801 R803 R804 R810 R811
1-216-041-00 1-216-057-00 1-216-057-00 1-216-041-00 1-216-041-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
470 2.2K 2.2K 470 470
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R813 R814 R815 R819 R820
1-216-047-91 1-216-041-00 1-249-413-11 1-216-081-00 1-216-081-00
RES-CHIP RES-CHIP CARBON RES-CHIP RES-CHIP
820 470 470 22K 22K
5% 5% 5% 5% 5%
1/10W 1/10W 1/4W 1/10W 1/10W
R823 R824 R827 R829 R831
1-216-049-11 1-216-049-11 1-216-025-11 1-216-065-91 1-216-295-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT
1K 1K 100 4.7K 0
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
R835 R837 R838 R839 R840
1-216-041-00 1-216-073-00 1-216-065-91 1-216-055-00 1-216-025-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
470 10K 4.7K 1.8K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R841 R843 R845 R847 R848
1-216-062-00 1-216-041-00 1-216-057-00 1-216-295-11 1-216-065-91
RES-CHIP RES-CHIP RES-CHIP SHORT RES-CHIP
3.6K 470 2.2K 0 4.7K
5% 5% 5%
1/10W 1/10W 1/10W
5%
1/10W
R849 R850 R852 R856 R857
1-216-295-11 1-216-065-91 1-216-053-00 1-216-071-00 1-216-049-11
SHORT RES-CHIP RES-CHIP RES-CHIP RES-CHIP
0 4.7K 1.5K 8.2K 1K
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
R858 R859 R860 R861 R862
1-216-049-11 1-216-055-00 1-216-061-00 1-216-089-11 1-216-045-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1K 1.8K 3.3K 47K 680
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R867 R869 R870 R871 R872
1-216-057-00 1-216-049-11 1-216-057-00 1-216-057-00 1-216-057-00
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
2.2K 1K 2.2K 2.2K 2.2K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R873 R875 R881 R882 R883
1-216-049-11 1-216-295-11 1-216-089-11 1-216-689-11 1-216-049-11
RES-CHIP SHORT RES-CHIP RES-CHIP RES-CHIP
1K 0 47K 39K 1K
5%
1/10W
5% 5% 5%
1/10W 1/10W 1/10W
R885
1-216-049-11 RES-CHIP
1K
5%
1/10W
– 94 –
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------R901 R902 R903 R904
PART NO. DESCRIPTION ------------------------------1-216-065-91 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP
4.7K 100 100 100
5% 5% 5% 5%
REMARK ------------1/10W 1/10W 1/10W 1/10W
R905 R906 R907 R908 R909
1-216-025-11 RES-CHIP 1-216-065-91 RES-CHIP 1-216-089-11 RES-CHIP 1-216-025-11 RES-CHIP 1-216-041-00 RES-CHIP
100 4.7K 47K 100 470
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R910 R911 R912 R913 R914
1-216-037-00 RES-CHIP 1-216-065-91 RES-CHIP 1-216-082-00 RES-CHIP 1-216-025-11 RES-CHIP 1-216-025-11 RES-CHIP
330 4.7K 24K 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R915 R916 R917 R918 R919
1-216-029-00 RES-CHIP 1-216-029-00 RES-CHIP 1-216-025-11 RES-CHIP 1-247-807-31 CARBON 1-216-029-00 RES-CHIP
150 150 100 100 150
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/4W 1/10W
R920 R921 R922 R924 R925
1-216-041-00 RES-CHIP 1-216-049-11 RES-CHIP 1-216-061-00 RES-CHIP 1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP
470 1K 3.3K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R927 R928 R929 R930 R1002
1-216-049-11 RES-CHIP 1-216-097-11 RES-CHIP 1-216-065-91 RES-CHIP 1-216-073-00 RES-CHIP 1-249-408-11 CARBON
1K 100K 4.7K 10K 180
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/4W
R1003 R1004 R1005 R1006 R1007
1-249-381-11 CARBON 1-216-063-91 RES-CHIP 1-249-401-11 CARBON 1-216-075-00 RES-CHIP 1-216-079-00 RES-CHIP
1 3.9K 47 12K 18K
5% 5% 5% 5% 5%
1/4W 1/10W 1/4W 1/10W 1/10W
R1008 R1010 R1011 R1012 R1013
1-216-035-00 RES-CHIP 1-216-109-00 RES-CHIP 1-216-073-00 RES-CHIP 1-216-047-91 RES-CHIP 1-216-079-00 RES-CHIP
270 330K 10K 820 18K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R1014 R1015 R1017 R1018 R1019
1-216-051-00 RES-CHIP 1-216-069-00 RES-CHIP 1-249-426-11 CARBON 1-216-061-00 RES-CHIP 1-216-073-00 RES-CHIP
1.2K 6.8K 5.6K 3.3K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/4W 1/10W 1/10W
R1020 R1023 R1024 R1025 R1101
1-216-025-11 RES-CHIP 1-216-067-00 RES-CHIP 1-216-093-91 RES-CHIP 1-216-129-00 RES-CHIP 1-216-045-00 RES-CHIP
100 5.6K 68K 2.2M 680
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R1102 R1103 R1104 R1106 R1108
1-216-051-00 RES-CHIP 1-216-045-00 RES-CHIP 1-216-055-00 RES-CHIP 1-216-022-00 RES-CHIP 1-216-061-00 RES-CHIP
1.2K 680 1.8K 75 3.3K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R1109 R1110 R1111 R1112 R1113
1-216-079-00 RES-CHIP 1-216-067-00 RES-CHIP 1-216-067-00 RES-CHIP 1-216-047-91 RES-CHIP 1-216-061-00 RES-CHIP
18K 5.6K 5.6K 820 3.3K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R1115 R1116 R1119 R1128 R1129
1-216-055-00 RES-CHIP 1-216-047-91 RES-CHIP 1-216-295-11 SHORT 1-216-037-00 RES-CHIP 1-216-037-00 RES-CHIP
1.8K 820 0 330 330
5% 5%
1/10W 1/10W
5% 5%
1/10W 1/10W
R1136 1-216-051-00 RES-CHIP R1701 ! 1-260-135-91 CARBON R1801 1-216-089-11 RES-CHIP
1.2K 1M 47K
5% 5% 5%
R1802
8.2K
5%
1/10W 1/2W 1/10W (FR model) 1/10W (FR model)
1-216-071-00 RES-CHIP
MA10
REF. NO. -----------R1803
PART NO. DESCRIPTION ------------------------------1-216-072-00 RES-CHIP
9.1K
5%
R1804
1-216-080-00 RES-CHIP
20K
5%
R1805
1-216-083-00 RES-CHIP
27K
5%
R1806
1-216-071-00 RES-CHIP
8.2K
5%
R1807
1-216-049-11 RES-CHIP
1K
5%
R1808
1-216-689-11 RES-CHIP
39K
5%
R1809
1-216-083-00 RES-CHIP
27K
5%
R1810
1-216-041-00 RES-CHIP
470
5%
R1811
1-216-067-00 RES-CHIP
5.6K
5%
R1812
1-216-081-00 RES-CHIP
22K
5%
R1813
1-216-077-91 RES-CHIP
15K
5%
R1814
1-216-073-00 RES-CHIP
10K
5%
R1815
1-216-089-11 RES-CHIP
47K
5%
R1816
1-216-059-00 RES-CHIP
2.7K
5%
R1817
1-216-089-11 RES-CHIP
47K
5%
R1818
1-216-089-11 RES-CHIP
47K
5%
R1819
1-216-073-00 RES-CHIP
10K
5%
R1820 R1821
1-216-295-11 SHORT 1-216-083-00 RES-CHIP
0 27K
5%
R1822
1-216-689-11 RES-CHIP
39K
5%
R1823
1-216-073-00 RES-CHIP
10K
5%
R1831
1-216-295-11 SHORT
0 (FR model)
– 95 –
REMARK ------------1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model) (FR model) 1/10W (FR model) 1/10W (FR model) 1/10W (FR model)
S401 S451 S1101 S1102 S1103
1-771-155-11 SWITCH, ROTARY (MODE SW) 1-762-108-11 SWITCH, PUSH (1 KEY) (REC PRF) 1-571-532-21 SWITCH, TACTIL (TIMER REC) 1-570-577-11 SWITCH, PUSH (STOP/REC) 1-570-577-11 SWITCH, PUSH (REW/VOL -)
S1104 S1105 S1106 S1107 S1108
1-570-577-11 SWITCH, PUSH (PLAY/VOL +) 1-571-532-21 SWITCH, TACTIL (CH -) 1-570-577-11 SWITCH, PUSH (FWD/CH +) 1-570-577-11 SWITCH, PUSH (PAUSE) 1-571-532-21 SWITCH, TACTIL (POWER)
S1109 1-571-532-21 SWITCH, TACTIL (INPUT SELECT) S1701 ! 1-571-433-31 SWITCH, PUSH (AC POWER) T1001 1-431-097-11 TRANSFORMER, BIAS OSCILLATION T1701 ! 1-427-962-11 TRANSFORMER, LINE FILTER VDR601!1-803-830-31 VARISTOR (ERZV14D621) X001 X251 X430
1-767-755-11 VIBRATOR, CRYSTAL 1-579-463-11 VIBRATOR, CRYSTAL 1-760-494-11 VIBRATOR, CRYSTAL
KV-14FV1B/FV1D/FV1E/FV1U RM-816 RM-814 RM-814
RM-815
KV-21FV1B/FV1D/FV1E/FV1U RM-816 RM-814 RM-814
The components identified by shading and mark ! are critical for safety. Replace only with part number specified.
RM-815
MA10 H10 PART NO. DESCRIPTION ------------------------------1-579-608-11 VIBRATOR, CRYSTAL 1-578-774-11 VIBRATOR, CRYSTAL
REMARK -------------
********************************************************************************** * A-1646-216-AH10 BOARD, COMPLETE ******************************* CN1301
1-766-719-11 CONNECTOR, BOARD TO BOARD 10P
D1301 D1302 D1303 D1304 D1305
8-719-053-43 DIODE SLR-325VCT31 (REC) 8-719-053-43 DIODE SLR-325VCT31 (TIMER REC) 8-719-061-96 DIODE SLR-325DCT31 (DIAL TIMER) 8-719-053-43 DIODE SLR-325VCT31 (STBY) 8-719-061-96 DIODE SLR-325DCT31 (DIAL TIMER)
D1306
8-719-061-96 DIODE SLR-325DCT31 (DIAL TIMER)
JR165
1-216-296-91 SHORT
0
Q1301
8-729-902-99 TRANSISTOR DTC114TK
R1301 R1302 R1307 R1308
1-249-403-11 CARBON 1-249-406-11 CARBON 1-216-073-00 RES-CHIP 1-216-073-00 RES-CHIP
68 120 10K 10K
5% 5% 5% 5%
1/4W 1/4W 1/10W 1/10W
S1301 S1302
1-762-196-21 SWITCH, TACT (EJECT) 1-418-156-11 ENCODER, ROTARYRY (DIAL TIMER)
**********************************************************************************
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REF. NO. -----------X801 X901
REF. NO. ------------
PART NO. -------------
! 1-251-317-32 ! 1-416-864-12 ! 1-419-548-11 1-419-494-11 ! 1-419-772-11
DESCRIPTION ------------------MISCELLANEOUS **********************
REMARK -------------
CAP ASSY, HIGH VOLTAGE COIL, VM COIL, DEGAUSSING COIL, CHOKE 56.0 mH COIL, DEGAUSSING
(14inch model) (14inch model) (21inch model) (21inch model)
1-452-032-00 MAGNET, DISC ; 10mmø 1-452-094-00 MAGNET, ROTATABLE DISC ; 15mmø ! 1-452-728-61 COIL, NA ROTATION (RT-154) (21inch model) 1-529-474-11 SPEAKER (5CM) (14inch model) 1-529-710-11 SPEAKER (5X9CM) (21inch model) ! 1-765-286-11 ! 1-776-860-12 1-900-905-56 1-900-905-60 1-900-905-61
V901 V901
CORD, POWER (FR/AEP/ESP model) POWER CORD, FILTER (UK) (UK model) CONNECTOR ASSY 7P CONNECTOR ASSY 5P CONNECTOR ASSY 35P
1-900-905-74 CONNECTOR ASSY, MICRO 5P(21inch model) ! 8-451-401-21 DEFLECTION YOKE (Y14RSA-L) (14inch model) ! 8-451-505-41 DEFLECTION YOKE (Y21RSA-L) (21inch model) ! 8-738-570-05 PICTURE TUBE (A34LRG70X) (14inch model) ! 8-738-836-05 PICTURE TUBE (A51LPT60X) (21inch model)
********************************************************************************** ACCESSORIES AND PACKING MATERIALS ***************************************************** 1-501-615-31 * 4-039-905-02 * 4-395-957-01 * 4-205-654-01 * 4-205-655-01 4-205-660-01 4-205-687-11 4-205-687-21 4-205-687-31 4-205-687-41
ANTENNA, LOOP (14inch UK model) BAG, PROTECTION (14inch model) BAG, PROTECTION (21inch model) CUSHION LOWER ASSY (14inch model) CUSHION UPPER ASSY (14inch model) INDIVIDUAL CARTON INSTRUCTION, MANUAL INSTRUCTION, MANUAL INSTRUCTION, MANUAL INSTRUCTION, MANUAL
(14inch model) (ESP model) (FR model) (UK model) (AEP model)
4-205-687-51 INSTRUCTION, MANUAL 4-205-687-61 INSTRUCTION, MANUAL
(ESP model) (AEP model)
********************************************************************************** REMOTE COMMANDER ***************************** 1-476-246-11 REMOTE COMMANDER (RM-814) (AEP/ESP model) 1-476-247-11 REMOTE COMMANDER (RM-815) (UK model) 1-476-248-11 REMOTE COMMANDER (RM-816) (FR model) 9-882-043-01 POCKET, COVER (FOR RM-814/815/816)
Sony Ichinomiya Corporation 9-927-400-01
Les composants identifiés par la marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
Quality Assurance Division
– 96 –
English 00FN7169-1 Printed in the UK © 2000. 7
