Service - Manual

Transcript

Service - Manual Compressed Air dryers MKE 23 - MKE 12500 TABLE OF CONTENTS 1. IMPORTANT SAFETY NOTES - Please read ................ 1 1.1. Transportation ............................................................. 4 1.2 Positioning ................................................................... 4 1.3 Installation .................................................................... 4 1.4 Before operating ........................................................ 4 1.5 Maintenance by an engineer .................................. 5 1.6 Maintenance by the user ......................................... 5 2. INTRODUCTION TO THE MKE DRYER ................ 5 3. OPERATION .................................................................. 9 4. 4.1 ELECTRICAL CONTROLLER ................................... 11 Digi-Pro ......................................................................... 11 4.2 ESD 3.............................................................................. 13 5. TECHNİCAL SPECIFICATIONS................................. 19 6. DIAGRAMS..................................................................... 20 Air Flow Diagrams....................................................... 20 Electrical Diagrams..................................................... 24 6.1 6.2 Page 2 7. P&ID DIAGRAMS........................................................... 38 GENERAL ARRANGEMENTS..................................... 52 8. EXPLODED DIAGRAMS ............................................. 53 9. COMPONENTS LOCATION ..................................... 106 10. TROUBLESHOOTING ................................................ 107 11. WARRANTY .................................................................. 109 EC DECLARATION OF CONFORMITY In accordance with EC Machinery directives 2006/95/EEC (LVD), 2004/108/EEC (EMC) Inspection certificate No:46,57 2006/42/EC. Inspection Certificate No:47,58 Inspection Body :Bureau Vertias (2287) We, MIKROPOR Org.San. Bol. Buyuk Selcuklu Blv. No:4 06935 Ankara/ TURKEY declare that, under our sole responsibility for manufacture and supply, the products; The Product: Refrigerant Air Dryer Type: MKE 23 to MKE 12500 Trade Mark: Mikropor Refrigerant Air Dryer Serial No: 0117MA00001 to 5217MA99999 Which this declaration relates, are in conformity with the provisions of the above directives using the following principal standards, EN12100-1:2011, EN12100-2:2011, EN1050, EN13857:2010, EN378-1+A2:2012, EN60204-1:2010, EN60529:2003, NEN-EN-IEC61000-6-1:2008, NEN-EN-IEC61000-6-2:2008, NEN-EN-IEC61000-6-3:2008/A1:2011, NEN-EN-IEC61000-6-4:2008, EN61000-3-2, BS EN 13445-1:2009, BS EN 13445-3:2009, ISO 15609-2:2005, ISO 15613-2006, ISO 15614-6:2008 issued at Ankara, on 02/01/2013 for Mikropor by Volkan AYHAN V.P. of Sales and Operations Page 3 I. IMPORTANT SAFETY NOTES Please READ When operating the air dryer the operator must apply safe working methods and observe all local safety instructions and relevant regulations. A) Prior to installation, the dryer and the compressed air system are to be depressurized and disconnected from the electrical main supply. B) The user is responsible for safe operating conditions. Parts and accessories must be replaced if inspection shows that safe operation cannot be assured. C) Installation, operation, maintenance and repair are only to be authorized, trained and skilled engineers. D) The minimum and maximum values stated must be observed, as well as all of the safety precautions described in this manual. E) If any statement in this manual does not comply with the local legislation, the strongest standard is to be applied. 1.1. Transportation A) Use care and caution when transporting the dryer. Avoid dropping and other physical abuse. B) A forklift can be used to transport the dryers provided the forks are long enough to support its full width or length and caution is used throughout the move. 1.2. Positioning A) The dryer must be installed horizontally. A minimum of 50 cm clearance around the dryer is necessary to allow a good ventilation and easy access for servicing. B) The ambient temperature in the room should not exceed 45°C and should not be below 4°C, taking the heat radiated by the dryer into account. C) (40 watt for each liter/sec under ISO 7183-A condition or 18 watts for each SCFM under ISO 7183-B condition). D) There should be no chemicals in the atmosphere that will damage the copper source. (Ammonia gas etc.) 1.3. Installation In addition to the general mechanical construction procedures and local regulations, the following instructions need to be emphasized: 1) Only authorized, trained and skilled engineers should install the compressed air dryer. 2) Safety devices, protecting covers or insulation in the dryers never to be dismantled or modified. Each pressure vessel or accessory installed outside the dryer with air above atmospheric pressure must be fitted with the required pressure relief safety valves. 1.4. Before Operating The following points must be observed before operating the air dryer: A) Review all safety precautions. B) The dryer connection piping measurements must be selected correctly. (See Technical specifications) C) The dryer connection piping must be adapted to the operating pressure. (See Technical specifications) D) Never operate the dryer at pressure above the maximum specified on the dryer label (check the technical specs too). E) The drains should be opened to atmosphere. If the drains are connected to a pipe / hose, the diameter of the hose / pipe should be large enough to create no back pressure during drain. It is not recommended to reduce the diameter of the hose / pipe less than port that is given at the drain outlet of the unit. The hose / pipe should be at atmospheric pressure at all time. Back pressure in relevant pipe will result in permanent damage on drain system and the affect function of the filters and / or dryers. Page 4 1.5. Maintenance by an Engineer A) Maintenance and repairs should only be performed when the air dryer is shut down and depressurized and when the main power switch is turned off. B) Use only the appropriate tools for maintenance and repair. C) Before dismantling a part under pressure, disconnect the pressure sources and depressurize the system. D) Proceed carefully during maintenance and repair. Prevent dirt from entering by covering parts and orifices with a clean cloth, paper or tape. A receiver should never be welded or modified in any way. E) Never leave tools, loose parts or cleaning rags in or on the air dryer. F) Before returning the dryer into service, check the setting of the control and safety devices as well as the pressure and the temperature of the compressed air circuit. 1.6. Maintenance by the user A) Keep the dryer clean. B) Regularly check the correct operation of the condensate drain trap. C) Every six months, check and clean the drain strainer by undoing the access screw and rinsing the filter with tap water to remove the trapped dirt from the inside. D) For aircooled dryers, clean the air condenser as soon as it’s dirty or clogged. E) For optional water-cooled condensers, use only clean water andinstall a water filter if needed. Use water counter flow to clean condenser if need. F) Check the trouble-shooting list in case of maintenance troubles. G) Check operating pressures, temperatures and time settings after maintenance. If operating and safety devices function properly, the air dryer may be used. 2. INTRODUCTION TO THE DRYER A) Manufacturer: MiKROPOR / www.mikropor.com B) Purpose of this dryer 1) This refrigerated compressed air dryer has been designed to remove water vapor from industrial compressed air. 2) This dryer has been designed for indoor operation. 3) The minimum and maximum values stated must be observed, as well as the safety precautions described in this manual. Page 5 C) Dryer label The following label is affixed on the cabinet of the refrigerant compressed air dryer. Dryer label describtions Model No: Manufactured In : 2UJDQඈ]H6DQD\ඈ%ROJHVඈ%X\XN6HOFXNOX%XOYDUඈ   1R$QNDUD785.(< Dryer Model No Serial No: Dryer Serial No Max Pressure: Dryer maximum working pressure Max Amper: Maximum allowed amount of current Fuse Amp Maximum size of protector Element Type: Filter element type in Air Dryer Refrigerant : Type of refrigerant gas used Refri Quantity: Amount of refrigerant gas used Voltage: Main supply voltage Power: Nominal input power under conditions specified for this type of dryer D) Working details 1) Refrigerant circuit: The refrigerant circuit can be divided in 3 parts: a) Low pressure section with an evaporator (heat exchanger) b) High-pressure section including: Condenser, liquid receiver, (if installed) and the filter dryer. c) Control circuit including: Compressor, Expansion valve, by-pass valve (if installed), Fan pressure switch (if installed) 2) For water - cooled dryers: a) Water valve b) Safety high pressure switch (if installed) 3) The Refrigerant circuit operates as follows: a) The compressor compresses gaseous refrigerant to a high temperature. b) The hot refrigerant condenses in the condenser. Being liquefied it is stored in the liquid receiver (if installed). c) The liquid is taken out the storage vessel and injected in the evaporator (heat exchanger) by an expansion valve. This expansion valve is protected by a filter, which removes particles and humidity that could be in the circuit. d) The injected liquid fills in the refrigerant section of the air / refrigerant heat exchanger and evaporates by taking out the calories from the compressed air. The gaseous refrigerant is sucked in the compressor and the cycle carries on. e) In order to keep the evaporation pressure steady, and thus the refrigerant temperature in the heat exchanger, a by-pass valve is injecting hot gaseous refrigerant in the circuit. On certain dryers, an automatic expansion valve regulates this. Page 6 4) Compressed air circuit: a) The saturated hot compressed air flows into the Economiserwhere it is pre-cooled by the out flowing dry chilled air. In the cold zone of the air refrigerant section it continues to cool down to dew point and enters the separator where condensates are collected. The outgoing chilled air is then warmed up in the economizer by the hot incoming air. b) The condensates are collected after centrifugal separation and drained out through the automatic trap. c) As long as the compressed air temperature does not drop below dew point, there will be no condensation in the air circuit. Compressed Air Dryer Working Principle Refrigerant Gas High Pressure Line Refrigerant Gas Low Pressure Line A Compressed Dry Air Outlet F Compressed Wet Air Inlet B E Refrigerant Compressor - A Condenser -B Filter dryer - C Expansion Valve - D Heat Exchanger - E Hot Gas Bypass Valve - F C D 5) Refrigerant compressor Drain - G G Being of the hermetic type, it requires no servicing. 6) Condenser a) The air condensers are equipped with a helecoidal at the condenser refrigerant level. On certain type of dryers, a water-cooled condenser can be fitted. b) In this case, a water valve being driven by the refrigerant circuit is taking care of its regulation. 7) Refrigerant circuit protection a) Klixon: The single phase compressors are equipped with a klixon which is a thermal sensitive switch controlling the temperature of the compressor and possible overintensity. In case of malfunction, the klixon trips but switches on again automatically as soon as the compressor has cooled down. b) High Pressure Security Switch: Refrigerant line is considered as a pressure vessel. That is why it is protected against bursts by the help of manually reset switch. It is set to 25 bars for dryers working with R134a c) Filter dryer: A refrigerant circuit is a closed circuit and total water removal in the refrigerant circuit is paramount in order to obtain a correct functioning. d) To avoid problems, the refrigerant circuit must be vacuumed before loading the refrigerant. It is equipped with a filter dryer, which also traps any solid particles, which may have migrated into the circuit during assembly. e) Water-cooled dryers have a safety high-pressure switch. In case of cooling water failure, the safety switch stops the dryer. When the safety switch has tripped out, it has to be manually resettled before switching on the dryer. Page 7 8) Refrigerant circuit controls a) Liquid refrigerant injection: The liquid refrigerant is into the evaporator by a control valve. This valve is a thermostatic or pressostatic one maintaining a constant overheats of the refrigerant in the evaporator(s). b) Constant evaporating pressure: In the dryers equipped with a by-pass valve, the evaporating pressure is kept constant by a controlled injection of hot gas from the high-pressure side into the low-pressure section of the circuit. 9) Condensate drain - trap assembly Dismantling the drain is easy because it can be isolated from the air circuit under pressure with a ball valve. The drain has to be depressurized before being dismantled. 10) Heat Exchanger Modular design a)The dryers are equipped with a compact Mono Bloc Heat Exchanger module. This assembly has been specially designed to dry compressed air and is made of: 1) An Economiser which pre-cools the entering hot air with the out flowing cold air. 2) An air/refrigerant exchanger cooling down the compressed air. 3) A centrifugal separator concentrating all condensates and requiring no maintenance. 11) Accessories Temperature switch: Temperature switch: Located inside the dryer, this temperature switch is adjustable from 0° up to 35 °C. Digital Controller –DigiPro: This device helps dryer save energy when there is not any compressed air flow in the dryer. Those information can be reached; Dewpoint value, periodic maintenance interval display, status report, run time meter, temperature unit selection (°F or °C) Digital Controller – ESD3: Energy Saving Device: (ESD) This device helps dryer save energy when there is not any compressed air flow in the dryer. Those information can be reached; Dewpoint value, periodic maintenance interval display, status report, run time meter, temperature unit selection (°F or °C) (Please see the models have standard and optional in next page) Page 8 3. OPERATION Control panels for MKE Series The control panel of the dryer includes the following elements: Monophase Digital Controller MKE 23 - MKE 623 Digi-Pro Triphase Digital Controller Accessories MKE 930 - MKE 3915 Digi-Pro Main Switch Triphase Digital Controller Accessories MKE 5085 - MKE 12500 ESD3 Emergency Stop IMPORTANT NOTE The Dryer has two Compressed Air Filter inside. It is better to change filter element for the best efficiency when the alarm status is active. It is recommended to keep replacement filter elements in your stock in order to replace them when needed. ATTENTION MKE range dryers have low pressure drop according its competitors. Do not use MKE range dryers together with other dryers which have higher pressure drop without getting the confirmation from our technical team. Page 9 3.1. During Operation Regularly check the digital temperature controller ESD3 or Digi-Pro on dryer. 3.2 Start up and shut-down Warning: Avoid leaving the dryer off when compressed air is still flowing through it. 3.3 Starting for the first time or after a long stop 1) Set the rotary switch to “I” This preheats the dryer and turns the drain system on. It is recommended to leave the dryer power on permanently so the crankcase heater runs continuously. IMPORTANT NOTE! 2) After a long stop of the dryer it is MANDATORY to allow a preheating period of minimum 4 hours before starting again, to avoid any compressed air flow during preheating. 3) Follow the daily starting and shut down preocedure. 3.4 Daily starting and shut-down 1) Push on the ON button to start the dryer. 2) The start light or Dryer Active will indicate that the dryer is running. 3) To stop the dryer, first stop the airflow (either shut-down the air compressor or close the inlet/outlet or by-pass valve) When the air flow is stopped, set the rotary switch on “ 0 “ Set it again on “ I “ in order to keep the preheating on. IMPORTANT NOTE ! 4) Avoid leaving the dryer stopped when compressed air is still flowing through it. 5) To switch the already preheated dryer on again, simply push the green start button. Page 10 4) ELECTRICAL CONTROLLER 4.1 DIGI-PRO 4.1.1 Description With the Digi-Pro series controllers, air dryers have outstanding technology for both functionality and dynamism, as well as appearance. The multi-functional display provides an accurate digital dew point display as well as coded alarm monitoring of the refrigerant dryer. DIGITAL CONTROLLER ADVANTAGES; • • • • • • Digital dew point monitoring Energy-saving mode display Periodic maintenance interval display Status report Run time meter Fahrenheit and Centigrade selection 4.1.2 Operation Using the Digi Pro controller as shown in the picture below: 4.1.3 Menu Buttons PROGRAM To modify the parameter, press and release button set. The menu is used by service team. To disable the Key Lock: Press and hold the SET for 4 sec. POWER This button is used for starting and stopping the dryer. Press and hold for 4 seconds to start or stop. MENU These buttons are used to navigate between screens and adjust values. MANUAL DRAİN This button is used for manual control of the drain output. Press and hold for 4 seconds to drain manually. Page 11 4.1.4 ALARM DISPLAY Alarms / warnings are displayed on the digital screen. That means the dryer is not working under normal operating conditions, which are outside the range of set values. Alarm Code Alarm Description Reason for Alarm tAL Low Temperature Alarm Refrigerant line temperature is lower than specified set values tAH High Temperature Alarm Refrigerant line temperature is higher than specified set values FIL Filter Change Alarm Filter element needs to be replaced SEr General Service Alarm General service time of the dryer HPr High Pressure Alarm Refrigerant high line pressure is higher than specified set values Pr1 Temperature Probe Alarm Temperature sensor is faulty. hFI Working Hours Alarm The dryer working hours allowed has been reached. Please contact to the service when an alarm/warning occurs. 4.1.5 MODE DISPLAY Page 12 DRYER ACTIVE MODE This mark indicates that the dryer is performed in active state and drying. AUTOMATIC DRAIN MODE Shows if the drain system is activated. ENERGY SAVİNG MODE Shows if the energy saving mode is activated CELSİUS UNİT MODE Indicates that Celsius temperature unit is selected. FAHRENHEİT UNİT MODE Indicates that Fahrenheit temperature unit is selected. COMPRESSOR STANDBY MODE This mode shows that the dryer is ready for drying operation. SERVİCE MODE This mode shows that the dryer in the service time. 4.2 ESD 3 4.2.1 DESCRIPTION E-687 is designed as a controller for refrigerant type compressed air dryers. The controller has 8 temperature sensor inputs. The controller has an RS-485 communication interface that can be used for remotely monitoring channel temperatures, set points, input and output states. Modbus RTU protocol is used for communication. The front panel of the controller contains a four line 20 character LCD display and buttons that are used in configuration and manual control operations. The dimensions of the controller are 96 x 192 mm (front panel) with a depth of 110 mm. The panel cutout should be 90x185 mm. The operating voltage of the controller is 20 - 60V AC or 20 - 85V DC. 4.2.2 OPERATION The front panel view of E-687 controller is given in the below figure. The front panel of the controller contains a four line 20 character LCD display, 10 buttons and 2 indicator leds. The Front Panel View of E-687 Controller button is used to enable or disable the ECO (economy) mode. Pressing this button complements the state of ECO, i.e. if it is enabled; disables, if it is disabled; enables the ECO mode. The green led on the left side of the button lights if the ECO mode is enabled. button is used for manual control of the drain output. button is used for alarm acknowledge. The dryer is automatically stopped if an anomaly is detected. In that case, the alarm output and the alarm indicator led (red) on the front panel become activated. In order to restart the dryer, alarm should be acknowledged and “restart delay” period should be timed out. Pressing button acknowledges the alarm and reenergizes the alarm output and alarm led. The buttons below the LCD display ( configuration operations. , , and ) are used in screen selection and button is used to change the temperature unit from ºC to ºF or vice versa. and buttons are used for starting and stopping the dryer respectively. If the dryer is stopped manually, it can not be started before “restart delay” period is timed out. , , , , and buttons are disabled during configuration operations. Page 13 4.2.3 OPERATION SCREENS 4.2.3.1 The Normal Operation Screen When the controller is powered on, it displays the type and version message, and then the restart delay timer is set to 5 seconds. After 5 seconds, the normal operation screen is displayed as shown in below figure The exchanger temperature (Dew Point) and operation state of the dryer is displayed in this screen. If there is a situation which will prevent the operation of the dryer then the “READY” message in the last line will become “DISABLED”. See below figure In order to start the dryer, the following conditions must be satisfied. 1. All the temperatures except the exchanger temperature and condenser outlet temperature must be between their low and high limits. The low pressure line temperature can be ‘HIGH’. 2. Digital Input 3 (Compressor Fault) is not activated. 3. Digital Input 4 (Compressor Overload) is not activated. 4. Digital Input 5 (Fan Fault) is not activated. 5. Digital Input 6 (Fan Overload) is not activated. 6. Digital Input 7 (Phase Sequence Error) is not activated. 7. Digital Input 8 (Remote Disable) is not activated. 8. Digital Input 11 (High Pressure) is not activated. 9. Digital Input 12 (Low Pressure) is not activated. Page 14 If all the above conditions are satisfied, the message in the last line of the normal operation screen will be “READY” and the dryer can be started either pressing button on the front panel or activating Digital Input 1 (Remote Start) or activating Digital Input 13 (Remote Control). When the dryer is started, the normal operation screen is displayed as shown in below figure. In the beginning, Digital Output 1 (Compressor Motor), Digital Output 2 (Drain Output) and Digital Output 3 (Dryer is Running) become active. While in normal operation, the drain output is controlled according to the configured “drain on” and “drain off” periods. “DRAIN ON” message is displayed in the end of the last line while the drain output is active. When the Digital Input 9 (Fan Motor is on) is activated, “FAN MOTOR IS ON” message is displayed in the second line as shown in below figure. Digital Input 14 (Water Pump is on) activates “WATER PUMP IS ON” message as shown in below figure. When ECO mode is enabled and the exchanger temperature is less than or equal to “ECO Start Set point” and this condition is prevailed more than “ECO Start Delay”, then, the compressor motor is stopped and ECO operation starts. During the ECO operation the appearance of the display is given in below figure. The value at the end of the second row indicates the time in seconds since beginning of the ECO operation. Page 15 Pressing and keys simultaneously at this page toggles the controller between automatic and manual mode. In manual mode, the dryer starts and stops manually by using and buttons. Unlike the manual mode, automatic mode enables the controller start and stop automatically at pre-programmed times on a daily basis When running in automatic mode, current scheduling information messages are also activated in the second line of the displays as show in below figure. “NOT SCHEDULED” message is displayed when no schedule exists. “START IN XXX” shows the time to the next scheduled program in minutes and “STOP IN XXX” message shows the time to the end of current running program in minutes. If the dryer is stopped manually by using button, or activating Digital Input 2 (Remote Stop) or deactivating Digital Input 13 (Remote Control), the normal operating screen is displayed as shown in below figure. The number at the end of the last line indicates the remaining time in seconds from the restart delay. If this number becomes zero and there is no anomaly, the dryer can be restarted. The first line in the normal operation screen (NO NAME) is user configurable. If the exchanger temperature sensor is broken, dew point temperature will be displayed as 1000ºC. 4.3.3. The Info Screens Various data related to the dryer can be monitored by sequentially pressing button. Pressing button, changes the display screen. While one screen is displayed, pressing button reverts to the normal operation screen. The flow chart for monitoring the dryer data is given in Figure 2.13. In this figure, screen numbers are shown on the upper left of the screens. Screen1 is the normal operation screen. While this screen is displayed, pressing button selects Screen2. By successively pressing button, all the screens can be accessed. Screens may also be selected by and buttons. Page 16 In Screen2, Screen3 and Screen4, the sensor temperatures are displayed. If the measured temperatures “LOW” or “HIGH” message is added in the end of the line. In case of sensor break, only “SENSOR BREAK” message is displayed. are between their low and high limits, only the temperature value is displayed, otherwise In screen 5 and 6 the states of the compressor motor, fan motor, the phase sequence, remote disable and air pressure are displayed. Actually this data is derived from the digital inputs. The message in the first line of Screen5 is determined by Digital Input 3 and Digital Input 4 (Compressor Fault and Compressor Overload). in the below table shows the relation between digital inputs and the message. Page 17 Screen8 displays the last four events that caused the dryer to be stopped automatically. The possible alternatives for the messages are given below. INLET AIR TEMP.LO INLET AIR TEMP.HI COMPRESSOR FAULT COMP.OVERLOAD EXCH.TEMP.LO FAN MOTOR FAULT EXCH.TEMP.HI LO.PRES.L.TEMP.LO FAN MOT.OVERLOAD PHASE SEQ.ERROR LO.PRES.L.TEMP.HI HI.PRES.L.TEMP.LO REMOTE DISABLE PRESSURE HIGH HI.PRES.L.TEMP.HI AMB.TEMP.LO PRESSURE LOW CONDENSER FAULT AMB.TEMP.HI Screen9 displays the date and time. Screen10 displays the states of the digital inputs and digital outputs. The letters ‘L’ and ‘H’ stands for ‘not activated’ and ‘activated’ states respectively. The data in the first line of Screen10 (D.INPUT1), from right to left corresponds to Digital Input 1 to 8. The data in the second line of Screen10 (D.INPUT2), from right to left corresponds to Digital Input 9 to 16. The data in the third line of Screen10 (D.OUTPUT), from right to left corresponds to Digital Output 1 to 8. Secreen11 displays automatic mode scheduling of the day. Please see Section 2.3.3 for scheduling for auto/manual selection. 4.3.4 Operation Principles In order to start the dryer, the following conditions must be satisfied. 1. 2. 3. All the temperatures except the exchanger temperature and condenser outlet temperature must be between their low and high limits. The low pressure line temperature can be ‘HIGH’. Digital Input 3 (Compressor Fault) is not activated. Digital Input 4 (Compressor Overload) is not activated. 4. 5. 6. 7. Digital Input 5 (Fan Fault) is not activated. Digital Input 6 (Fan Overload) is not activated. Digital Input 7 (Phase Sequence Error) is not activated. Digital Input 8 (Remote Disable) is not activated. 8. 9. Digital Input 11 (High Pressure) is not activated. Digital Input 12 (Low Pressure) is not activated. If all the above conditions are satisfied, the dryer can be started. Page 18 5. TECHNICAL SPECIFICATIONS Model Capacity (m³/h) Connection Size Voltage Absorbed Power (kw) Nominal Current (Amp) Fuse Amperaje (Amp) Refrigerant gas Pressure drop (mbar) Max. Working Pressure (bars) Max. ambient temperature (°C) Max. inlet temperature (°C) MKE 23 23 1/2” 230/1/50 0,32 1,71 4 R134a 150 16 45 50 MKE 38 38 1/2” 230/1/50 0,33 1,72 4 R134a 220 16 45 50 MKE 53 53 1/2” 230/1/50 0,36 1,87 4 R134a 350 16 45 50 MKE 100 100 3/4” 230/1/50 0,37 1,9 4 R134a 100 16 45 50 MKE 155 155 3/4” 230/1/50 0,59 3,32 6 R134a 220 16 45 50 MKE 190 190 3/4” 230/1/50 0,68 3,93 6 R134a 320 16 45 50 MKE 210 210 1 1/2” 230/1/50 0,82 5,22 8 R134a 220 16 45 50 MKE 305 305 1 1/2” 230/1/50 1,07 6,48 10 R134a 320 16 45 50 MKE 375 375 1 1/2” 230/1/50 1,19 5,56 8 R134a 200 16 45 50 MKE 495 495 2” 230/1/50 1,23 5,74 8 R134a 310 16 45 50 MKE 623 623 2” 230/1/50 1,32 6,63 10 R134a 240 16 45 50 MKE 930 930 2” 230/1/50 1,84 9,65 15 R134a 150 16 45 50 MKE 1200 1200 2” 230/1/50 2,35 12,7 15 R134a 190 16 45 50 MKE 1388 1388 3” 400/3/50 2,97 5,36 15 R134a 350 16 45 50 MKE 1800 1800 3” 400/3/50 3,38 6,66 15 R134a 290 16 45 50 MKE 2500 2500 3” 400/3/50 4,85 10,57 20 R134a 190 16 45 50 MKE 2775 2775 3” 400/3/50 4,86 10,57 20 R134a 350 16 45 50 MKE 3330 3330 DN100 400/3/50 5,61 11,97 25 R134a 270 16 45 50 MKE 3915 3915 DN100 400/3/50 6,33 11,87 30 R134a 380 16 45 50 MKE 5085 5085 DN100 400/3/50 7,92 15,25 35 R134a 320 16 45 50 MKE 5850 5850 DN100 400/3/50 9,22 19,75 40 R134a 350 16 45 50 MKE 6975 6975 DN150 400/3/50 11,66 21,85 45 R134a 320 16 45 50 MKE 7875 7875 DN150 400/3/50 12,27 21,85 45 R134a 350 16 45 50 MKE 9000 9000 DN150 400/3/50 14,71 28,45 60 R134a 350 16 45 50 MKE 10500 10500 DN200 400/3/50 14,77 28,65 60 R134a 350 16 45 50 MKE 12500 12500 DN200 400/3/50 18,57 37,65 75 R134a 350 16 45 50 FOR ALL MODELS Nominal Pressure 7 bar Maximum pressure 16 bar Maximum ambient temperature 45°C Minimum ambient temperature 4°C Maximum inlet temperature 50°C Page 19 Page 20 3 3,/27)/2:/,1( '5$,1)/2:/,1( M M - 5 4 9 1 6 10 7 +ඈJK3UHVVXUH6ZඈWFK3DUW1R ඈVQRWXVHGIURP0.(WR0.( +RW*DV%\3DVV9DOYH3DUW1R ඈVQRWXVHGIURP0.(WR0.( /ඈTXඈG5HFHඈYHU3DUW1R ඈVQRWXVHGIURP0.(WR0.( /ඈTXඈG6HSDUDWRU3DUW1R ඈVXVHGIURP0.(WR0.( /RZ3UHVVXUH6ZඈWFK3DUW1R ඈVRQO\0.(DQG0.( IMPORTANT NOTICE: 2 5()5,*(5$17*$6)/2:/,1( &2035(66('$,5)/2:/,1( 8 11 14 12 16 6 14 13 13 6 15 'UDඈQ 2XWOHW AIR INLET 6HUYඈFH'UDඈQ AIR OUTLET 6.DIAGRAMS 6.1 AIR FLOW DIAGRAMS MKE 23 - MKE 1800 6.1 AIR FLOW DIAGRAMS MKE 23 - MKE 1800 16 CHECK VALVE 1 15 SOLENOID VALVE 1 14 MANUEL VALVE 1 13 FILTER 2 12 HEAT EXCHANGER 1 11 LOW PRESSURE SWITCH 1 10 LIQUID SEPARATOR 1 9 BY-PASS VALVE 1 8 EXPANSION VALVE 1 7 FILTER DRIER 1 6 LIQUID RECEIVER 1 5 HIGH PRESSURE SWITCH 1 4 FAN SWITCH 1 3 CONDENSER 1 2 FAN MOTOR 2 1 COMPRESSOR 1 POS. DESCRIPTION QTY Page 21 Page 22 M M 3 - 5 16 4 9 1 6 7 $ඈU&RPSUHVVHG)ඈOWHUVDUHRQO\XVHG0.(DQG0.( IMPORTANT NOTICE: 2 PILOT FLOW LINE DRAIN FLOW LINE COMPRESSED AIR FLOW LINE REFRIGERANT GAS FLOW LINE 8 10 12 11 18 'UDඈQ Outlet 15 14 18 13 S 17 18 AIR INLET AIR OUTLET 6.1 AIR FLOW DIAGRAMS MKE 2500 - MKE 12500 6.1 AIR FLOW DIAGRAMS MKE 2500 - MKE 12500 18 MANUEL VALVE 4 17 SELONOID VALVE 1 16 OIL SEPARATOR 1 15 DRAIN COLLECTOR 1 14 MEMBRANE VALVE 3 13 AIR COLLECTOR 2 12 HEAT EXCHANGER 3 11 LOW PRESSURE SWITCH 1 10 LIQUID SEPARATOR 1 9 BY-PASS VALVE 1 8 EXPANSION VALVE 1 7 FILTER DRIER 1 6 LIQUID RECEIVER 1 5 HIGH PRESSURE SWITCH 1 4 FAN SWITCH 1 3 CONDENSER 1 2 FAN MOTOR 2 1 COMPRESSOR 1 POS. DESCRIPTION QTY Page 23 6.2 MKE ELECTRICAL DIAGRAMS With Control & Power “User must supply the protective earth conductor of the dryer. The conductor is to be connected to the point on the conducting body of the dryer, specified by a sticker with the protective earth symbol next to it. The size of the protective earth conductor should be minimum the size of the power conductor, minimum 16 mm² for power conductor size between 16 and 35 mm², minimum half the size of the conductor if it is larger than 35 mm².” Page 24 6.2 ELECTRICAL DIAGRAMS MKE 23 to MKE 53 Page 25 6.2 ELECTRICAL DIAGRAMS MKE 100 to MKE 190 Page 26 6.2 ELECTRICAL DIAGRAMS MKE 210 to MKE 1200 Page 27 6.2 ELECTRICAL DIAGRAMS MKE 1388 - MKE 3915 CONTROL Page 28 6.2 ELECTRICAL DIAGRAMS MKE 1388 to 3915 POWER Page 29 6.2 ELECTRICAL DIAGRAMS MKE 5085 to 6975 CONTROL Page 30 6.2 ELECTRICAL DIAGRAMS MKE 5085 to 6975 POWER Page 31 6.2 ELECTRICAL DIAGRAMS MKE 7875 CONTROL Page 32 6.2 ELECTRICAL DIAGRAMS MKE 7875 POWER Page 33 6.2 ELECTRICAL DIAGRAMS MKE 9000 - 10500 CONTROL Page 34 6.2 ELECTRICAL DIAGRAMS MKE 9000-10500 POWER Page 35 6.2 ELECTRICAL DIAGRAMS MKE 12500 CONTROL Page 36 6.2 ELECTRICAL DIAGRAMS MKE 12500 POWER Page 37 8. MKE P&ID DIAGRAM DRAWINGS & GENERAL ARRANGEMENTS Page 38 Page 39 6.3 P&ID DIAGRAM DRAWINGS MKE 23 to MKE 53 Page 40 6.3 P&ID DIAGRAM DRAWINGS MKE 100 to MKE 190 Page 41 6.3 P&ID DIAGRAM DRAWINGS MKE 210 to MKE 375 Page 42 6.3 P&ID DIAGRAM DRAWINGS MKE 495 - MKE 623 Page 43 6.3 P&ID DIAGRAM DRAWINGS MKE 930 - MKE 1200 Page 44 6.3 P&ID DIAGRAM DRAWINGS MKE 1388 - MKE 1800 Page 45 6.3 P&ID DIAGRAM DRAWINGS MKE 2500 - MKE 2775 Page 46 6.3 P&ID DIAGRAM DRAWINGS MKE 3330 - MKE 3915 Page 47 6.3 P&ID DIAGRAM DRAWINGS MKE 5085 - MKE 5850 Page 48 6.3 P&ID DIAGRAM DRAWINGS MKE 6975 - MKE 7875 Page 49 6.3 P&ID DIAGRAM DRAWINGS MKE 9000 - MKE 10500 Page 50 6.3 P&ID DIAGRAM DRAWINGS MKE 12500 Page 51 7.GENERAL ARRANGEMENTS Model Filter Quantity and Type Element Type Length (mm) Width (mm) Height (mm) Weight (kg) MKE 23 GKO50 X + Y MKO50 KIT 413 363 557 32 MKE 38 GKO50 X + Y MKO50 KIT 413 363 557 32 MKE 53 GKO50 X + Y MKO50 KIT 413 363 557 32 MKE 100 GKO150 X + Y MKO150 KIT 473 453 832 51 MKE 155 GKO150 X + Y MKO150 KIT 473 453 832 53 MKE 190 GKO150 X + Y MKO150 KIT 473 453 832 55 MKE 210 GKO500 X + Y MKO500 KIT 553 503 874 78 MKE 305 GKO500 X + Y MKO500 KIT 553 503 874 83 MKE 375 GKO500 X + Y MKO500 KIT 553 503 874 86 MKE 495 GKO851 X + Y MKO851 KIT 678 648 1157 160 MKE 623 GKO1210 X + Y MKO1210 KIT 678 648 1157 165 MKE 930 GKO1210 X + Y MKO1210 KIT 948 728 1370 220 MKE 1200 GKO1210 X + Y MKO1210 KIT 948 728 1370 230 MKE 1388 GKO1820 X + Y MKO1820 KIT 948 798 1460 270 MKE 1800 GKO1820 X + Y MKO1820 KIT 948 798 1460 285 MKE 2500 GKO2700 X + Y MKO2700 KIT 1163 778 1725 392 MKE 2775 GKO2700 X + Y MKO2700 KIT 1163 778 1725 410 MKE 3330 Not Included Not Included 1397 847 1770 492 MKE 3915 Not Included Not Included 1397 847 1770 520 MKE 5085 Not Included Not Included 1467 1077 1930 696 MKE 5850 Not Included Not Included 1467 1077 1930 718 MKE 6975 Not Included Not Included 2188 1062 1925 900 MKE 7875 Not Included Not Included 2188 1062 1925 925 MKE 9000 Not Included Not Included 2697 897 1975 975 MKE 10500 Not Included Not Included 2697 897 1975 1100 MKE 12500 Not Included Not Included 2550 1550 2100 1600 Security low pressure switch Drain timer Refrigerant temperature switch Water flow valve (if water condenser) 1.6 bar 5 min. -5sec. 45°C 11 bar ALL MODELS Page 52 Superheat of thermostatic expansion valve Evaporating pressure Fan pressure switch Security high pressure switch 5°C - 10°C 2.05 bar 9 - 12 bar 25 bar 8. MKE EXPLODED DIAGRAMS & SPARE PART LISTS Page 53 Page 54 57 56 58 36 47 48 55 62 51 53 45 63 41 1 52 54 2 41 44 11 9 8 30 10 12 60 61 59 49 3 17 13 14 35 29 15 4 18 16 7 19 20 38 34 6 18 33 40 50 32 5 35 41 37 28 24 23 25 26 6 43 31 42 22 21 39 46 27 8.1 - ED & Spare Part List MKE 23 8.1 - ED & Spare Part List MKE 23 63 ROTOLOC ADAPTOR2 2 M 60E-RTA2 62 POWER CA LE RI ET 3 5 1 3 M 130E-PWC CA LE STRAP 3 M 90E-CSP 8 1 M 260E-CFS 58 CA INET FASTENER CA INET TOP 57 CA INET STRIPPING 2 M 30E-CSG 2 M 260E-CA CA INET RIG T CA INET LEFT 1 M 30E-C R 1 M 30E-CLT RI ET NUT M8 4 1 M 260E-RNT8 CONTROLLER PANEL ALL AL E CA INET STUD AND NUT 1 1 M 30E-COP M 260E- L 8 M 260E-STU DIGITAL CONTROLLER 1 M 170E-DPI PLASTIC CONTROL PANEL 1 M 170E-PCP 1 M 260E-FNS 1 1 M 90E-DRI 61 60 59 CA INET 56 55 54 53 52 51 50 49 48 47 CA LE GLAND PG11 FAN ON OFF SWITC 46 45 ANDLE DE DRATOR FILTER DRIER M 90E-R T3 5 M 30E-CAT M 260E-CG11 44 E PANSION AL E 43 SETTING T E CONNECTION OLT M4 8 1 M 30E-STC 8 M 60E- LT48 OLT M4 12 22 M 90E- LT412 1 1 M 30E-CAI 42 41 40 39 38 37 36 35 34 33 CA INET INSIDE CA INET REAR TOP COMPRESSED AIR FILTER ELEMENT COMPRESSED AIR FILTER ELEMENT GAS ET FOR DRAIN REDUCTION 1 / 2" - 1 / 4" EAT E C ANGER SUPPORT STEEL ORING M 30E- P M 30E-CRT 1 M 30E-FIE- 1 M 30E-FIE- 1 M 90E-GFD 1 1 M 260E-RDC 4 M 30E-ORG M 30E-E S 32 CONNECTION CIT 2 M 30E-CN 31 COUPLING CLAMP 4 M 30E-CPG 90* 1 / 4" - 6mm ELBOW COMPRESSED AIR FILTER ELEMENT IT 1 M 170E-EWF 1 M 30E-EL - COMPRESSED AIR FILTER ELEMENT IT 1 M 30E-EL - 4 4 M 30E-NT6 26 NUT M6 WAS ER 18 7 1 25 START CAPACITOR 1 M 20E-SCR 24 O ERLOAD PROTECTOR 1 M 20E-O P 23 START RELA 1 M 20E-STR 22 COMPRESSOR ELECTRICAL O 1 M 20E-CEP 21 20 COMPRESSOR M 20E-CMP SOLENOID AL E COIL 1 1 19 SOLENOID AL E 1 M 260E-SL 18 1 / 4" - 6mm FITTINGS 3 M 150E-FIT6 17 1 / 4" NIPPLE 1 / 4" T CONNECTOR 2 1 M 170E-NIP1 4 30 29 28 27 16 15 C EC AL E M 40E-WSR18 M 260E-S C M 170E-T1 4 1 M 170E-C 14 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 13 DRAIN ALL AL E 1 M 260E-D 1 M 260E-ELW2 1 1 1 M 30E-I E 12 11 10 09 EL OW 2 INSULATION OF EAT E C ANGER EAT E C ANGER WAS ER 20 4 5 1 5 M 30E-E C M 30E-W R20 08 OLT M4 14 1 M 30E- LT414 07 06 NUT M4 OLT M6 30 4 8 M 30E-NT4 M 260E- LT630 05 FAN 1 M 40E-FAN 04 03 1 1 M 40E-FGR 02 )$1*5ø// FAN GLADE CONDANSER 1 M 30E-CON 01 CA INET ASE 1 M 30E-CA ITEM NO MATERIAL NAME T M 40E-F L SPARE PART CODE RE PART LIST Page 55 Page 56 57 56 58 36 47 48 55 62 51 53 45 63 41 1 52 54 2 41 44 11 9 8 30 10 12 60 61 59 49 3 17 13 14 35 29 15 4 18 16 7 19 20 38 34 6 18 33 40 50 32 5 35 41 37 28 24 23 25 26 6 43 31 42 22 21 39 46 27 8.1 - ED & Spare Part List MKE 38 8.1 - ED & Spare Part List MKE 38 63 ROTOLOC ADAPTOR2 2 M 60E-RTA2 62 POWER CA LE RI ET 3 5 1 3 M 130E-PWC CA LE STRAP 3 M 90E-CSP 8 1 M 260E-CFS 58 CA INET FASTENER CA INET TOP 57 CA INET STRIPPING 2 M 30E-CSG 2 M 260E-CA CA INET RIG T CA INET LEFT 1 M 30E-C R 1 M 30E-CLT RI ET NUT M8 4 1 M 260E-RNT8 CONTROLLER PANEL ALL AL E CA INET STUD AND NUT 1 1 M 30E-COP M 260E- L 8 M 260E-STU DIGITAL CONTROLLER 1 M 170E-DPI PLASTIC CONTROL PANEL 1 M 170E-PCP 1 M 260E-FNS 1 1 M 90E-DRI 61 60 59 CA INET 56 55 54 53 52 51 50 49 48 47 CA LE GLAND PG11 FAN ON OFF SWITC 46 45 ANDLE DE DRATOR FILTER DRIER M 90E-R T3 5 M 30E-CAT M 260E-CG11 44 E PANSION AL E 43 SETTING T E CONNECTION OLT M4 8 1 M 30E-STC 8 M 60E- LT48 OLT M4 12 22 M 90E- LT412 1 1 M 30E-CAI 42 41 40 39 38 37 36 35 34 33 CA INET INSIDE CA INET REAR TOP COMPRESSED AIR FILTER ELEMENT COMPRESSED AIR FILTER ELEMENT GAS ET FOR DRAIN REDUCTION 1 / 2" - 1 / 4" EAT E C ANGER SUPPORT STEEL ORING M 30E- P M 30E-CRT 1 M 30E-FIE- 1 M 30E-FIE- 1 M 90E-GFD 1 1 M 260E-RDC 4 M 30E-ORG M 30E-E S 32 CONNECTION CIT 2 M 30E-CN 31 COUPLING CLAMP 4 M 30E-CPG 90* 1 / 4" - 6mm ELBOW COMPRESSED AIR FILTER ELEMENT IT 1 M 170E-EWF 1 M 30E-EL - COMPRESSED AIR FILTER ELEMENT IT 1 M 30E-EL - 4 4 M 30E-NT6 26 NUT M6 WAS ER 18 7 1 25 START CAPACITOR 1 M 20E-SCR 24 O ERLOAD PROTECTOR 1 M 20E-O P 23 START RELA 1 M 20E-STR 22 COMPRESSOR ELECTRICAL O 1 M 20E-CEP 21 20 COMPRESSOR M 20E-CMP SOLENOID AL E COIL 1 1 19 SOLENOID AL E 1 M 260E-SL 18 1 / 4" - 6mm FITTINGS 3 M 150E-FIT6 17 1 / 4" NIPPLE 1 / 4" T CONNECTOR 2 1 M 170E-NIP1 4 30 29 28 27 16 15 C EC AL E M 40E-WSR18 M 260E-S C M 170E-T1 4 1 M 170E-C 14 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 13 DRAIN ALL AL E 1 M 260E-D 1 M 260E-ELW2 1 1 1 M 30E-I E 12 11 10 09 EL OW 2 INSULATION OF EAT E C ANGER EAT E C ANGER WAS ER 20 4 5 1 5 M 30E-E C M 30E-W R20 08 OLT M4 14 1 M 30E- LT414 07 06 NUT M4 OLT M6 30 4 8 M 30E-NT4 M 260E- LT630 05 FAN 1 M 40E-FAN 04 03 1 1 M 40E-FGR 02 )$1*5ø// FAN GLADE CONDANSER 1 M 30E-CON 01 CA INET ASE 1 M 30E-CA ITEM NO MATERIAL NAME T M 40E-F L SPARE PART CODE RE PART LIST Page 57 Page 58 57 56 58 36 47 48 55 62 51 53 45 63 41 1 52 54 2 41 44 11 9 8 30 10 12 60 61 59 49 3 17 13 14 35 29 15 4 18 16 7 19 20 38 34 6 18 33 40 50 32 5 35 41 37 28 24 23 25 26 6 43 31 42 22 21 39 46 27 8.1 - ED & Spare Part List MKE 53 8.1 - ED & Spare Part List MKE 53 63 ROTOLOC ADAPTOR2 2 M 60E-RTA2 62 POWER CA LE RI ET 3 5 1 3 M 130E-PWC CA LE STRAP 3 M 90E-CSP 8 1 M 260E-CFS 58 CA INET FASTENER CA INET TOP 57 CA INET STRIPPING 2 M 30E-CSG 2 M 260E-CA CA INET RIG T CA INET LEFT 1 M 30E-C R 1 M 30E-CLT RI ET NUT M8 4 1 M 260E-RNT8 CONTROLLER PANEL ALL AL E CA INET STUD AND NUT 1 1 M 30E-COP M 260E- L 8 M 260E-STU DIGITAL CONTROLLER 1 M 170E-DPI PLASTIC CONTROL PANEL 1 M 170E-PCP 1 M 260E-FNS 1 1 M 90E-DRI 61 60 59 CA INET 56 55 54 53 52 51 50 49 48 47 CA LE GLAND PG11 FAN ON OFF SWITC 46 45 ANDLE DE DRATOR FILTER DRIER M 90E-R T3 5 M 30E-CAT M 260E-CG11 44 E PANSION AL E 43 SETTING T E CONNECTION OLT M4 8 1 M 30E-STC 8 M 60E- LT48 OLT M4 12 22 M 90E- LT412 1 1 M 30E-CAI 42 41 40 39 38 37 36 35 34 33 CA INET INSIDE CA INET REAR TOP COMPRESSED AIR FILTER ELEMENT COMPRESSED AIR FILTER ELEMENT GAS ET FOR DRAIN REDUCTION 1 / 2" - 1 / 4" EAT E C ANGER SUPPORT STEEL ORING M 30E- P M 30E-CRT 1 M 30E-FIE- 1 M 30E-FIE- 1 M 90E-GFD 1 1 M 260E-RDC 4 M 30E-ORG M 30E-E S 32 CONNECTION CIT 2 M 30E-CN 31 COUPLING CLAMP 4 M 30E-CPG 90* 1 / 4" - 6mm ELBOW COMPRESSED AIR FILTER ELEMENT IT 1 M 170E-EWF 1 M 30E-EL - COMPRESSED AIR FILTER ELEMENT IT 1 M 30E-EL - 4 4 M 30E-NT6 26 NUT M6 WAS ER 18 7 1 25 START CAPACITOR 1 M 30E-SCR 24 O ERLOAD PROTECTOR 1 M 30E-O P 23 START RELA 1 M 30E-STR 22 COMPRESSOR ELECTRICAL O 1 M 30E-CEP 21 20 COMPRESSOR M 30E-CMP SOLENOID AL E COIL 1 1 19 SOLENOID AL E 1 M 260E-SL 18 1 / 4" - 6mm FITTINGS 3 M 150E-FIT6 17 1 / 4" NIPPLE 1 / 4" T CONNECTOR 2 1 M 170E-NIP1 4 30 29 28 27 16 15 C EC AL E M 40E-WSR18 M 260E-S C M 170E-T1 4 1 M 170E-C 14 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 13 DRAIN ALL AL E 1 M 260E-D 1 M 260E-ELW2 1 1 1 M 30E-I E 12 11 10 09 EL OW 2 INSULATION OF EAT E C ANGER EAT E C ANGER WAS ER 20 4 5 1 5 M 30E-E C M 30E-W R20 08 OLT M4 14 1 M 30E- LT414 07 06 NUT M4 OLT M6 30 4 8 M 30E-NT4 M 260E- LT630 05 FAN 1 M 40E-FAN 04 03 1 1 M 40E-FGR 02 )$1*5ø// FAN GLADE CONDANSER 1 M 30E-CON 01 CA INET ASE 1 M 30E-CA ITEM NO MATERIAL NAME T M 40E-F L SPARE PART CODE RE PART LIST Page 59 49 48 59 Page 60 44 47 58 60 62 55 54 61 52 1 53 40 14 15 13 10 2 29 30 16 12 17 57 10 56 42 11 28 27 8 9 26 25 51 20 24 31 7 3 6 23 A 33 45 4 65 21 66 67 67 34 46 5 64 38 40 63 22 43 32 39 36 37 50 41 19 A 18 35 8.1 - ED & Spare Part List MKE 100 8.1 - ED & Spare Part List MKE 100 67 1 4 -6 3 M 150E-FIT6 66 SOLENOID AL E COIL FITTINGS 1 M 260E-S C 65 1 4 NIPPLE 2 M 170E-NIP1 4 64 1 4 T CONNECTOR 1 M 170E-T1 4 63 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 62 POWER CA LE 1 M 130E-PWC 61 CA LE GLAND PG11 1 M 260E-CG11 60 OLT M6 15 4 M 90E- LT615 59 CA INET TOP 1 M 60E-CAT 58 CA INET RIG T 1 M 60E-C R 57 CA LE STRAP 3 M 90E-CSP 56 CA INET FASTENER 8 M 260E-CFS 55 CA INET STRIPPING 2 M 60E-CSG 54 CA INET 4 M 260E-CA ANDLE 53 CA INET LEFT 1 M 60E-CLT 52 RI ET NUT M8 4 M 260E-RNT8 51 COMPRESSED AIR FILTER ELEMENT 1 M 60E-FIE- 50 COMPRESSED AIR FILTER ELEMENT 1 M 60E-FIE- 49 DIGITAL CONTROLLER 1 M 130E-DPI 48 PLASTIC CONTROL PANEL 1 M 170E-PCP 47 CONTROLLER PANEL 1 M 60E-COP 46 REDUCTION 1 / 2" - 1 / 4" 2 M 260E-RDC 45 90* 1 / 4" - 6mm ELBOW 1 M 170E-EWF 44 GAS ET FOR DRAIN 1 M 90E-GFD 43 C EC 1 M 170E-C 8 M 260E-STU 42 AL E CA INET STUD AND NUT 41 OLT M4 8 8 M 60E- LT48 40 OLT M4 12 22 M 90E- LT412 39 CA INET REAR TOP 1 M 60E-CRT 38 CA INET INSIDE 1 M 60E-CAI 37 CONNECTION CIT2 2 M 60E-CN 2 36 25ø1* 5 M 60E-ORG 35 COUPLING CLAMP 5 M 60E-CPG 1 M 260E- ALL AL E 34 L 33 COMPRESSED AIR FILTER ELEMENT IT 1 M 60E-EL - 32 COMPRESSED AIR FILTER ELEMENT IT 1 M 60E-EL - 31 CONNECTION CIT1 1 M 60E-CN 1 IG 30 PRESSURE SWITC 1 M 110E- PS 29 ADAPTOR T 1 M 60E-TDP 28 FAN ON OFF SWITC 1 M 260E-FSW 1 M 60E-CPT1 1 M 90E-DRI 1 M 60E- 1 M 70E-RTA3 CUPPER T1 27 26 25 24 DE DRATOR FILTER DRIER E PANSION AL E ROTOLOC ADAPTOR3 EL OW 2 P 1 M 260E-ELW2 22 DRAIN AL E 1 1 M 260E-DRA1 21 SELONOID AL E 1 M 150E-S A 20 ROTOLOC ADAPTOR2 1 M 60E-RTA2 1 M 60E-I E 1 M 60E-E C 4 M 60E-W R22 23 19 18 17 INSULATION OF EAT E C ANGER EAT E C ANGER WAS ER 22 85 25 16 OLT M8 40 4 M 60E- LT840 15 START RELA 1 M 40E-STR 14 O ERLOAD PROTECTOR 1 M 40E-O P 13 START CAPACITOR 1 M 40E-SCR 12 COMPRESSOR ELECTRICAL O 1 M 40E-CE 11 COMPRESSOR 1 M 40E-CMP 9 M 40E-R T3 5 1 M 40E-W R20 10 09 RI ET WAS ER 35 20 43 15 08 OLT M4 14 1 M 40E- LT414 07 NUT M4 4 M 40E-NT4 06 OLT M6 20 4 M 40E- LT620 05 FAN 1 M 40E-FMT 04 )$1*5ø// 1 M 40E-GRL 03 FAN LADE 1 M 40E-FAN 02 CONDANSER 1 M 40E-CON 01 CA INET ASE 1 M 60E-CA MATERIAL NAME T SPARE PART RE CODE ITEM NO PART LIST Page 61 49 48 59 Page 62 44 47 58 60 62 55 54 61 52 1 53 40 14 15 13 10 2 29 30 16 12 17 57 10 56 42 11 28 27 8 9 26 25 51 20 24 31 7 3 6 23 A 33 45 4 65 21 66 67 67 34 46 5 64 38 40 63 22 43 32 39 36 37 50 41 19 A 18 35 8.1 - ED & Spare Part List MKE 155 8.1 - ED & Spare Part List MKE 155 67 1 4 -6 3 M 150E-FIT6 66 SOLENOID AL E COIL FITTINGS 1 M 260E-S C 65 1 4 NIPPLE 2 M 170E-NIP1 4 64 1 4 T CONNECTOR 1 M 170E-T1 4 63 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 62 POWER CA LE 1 M 130E-PWC 61 CA LE GLAND PG11 1 M 260E-CG11 60 OLT M6 15 4 M 90E- LT615 59 CA INET TOP 1 M 60E-CAT 58 CA INET RIG T 1 M 60E-C R 57 CA LE STRAP 3 M 90E-CSP 56 CA INET FASTENER 8 M 260E-CFS 55 CA INET STRIPPING 2 M 60E-CSG 54 CA INET 4 M 260E-CA ANDLE 53 CA INET LEFT 1 M 60E-CLT 52 RI ET NUT M8 4 M 260E-RNT8 51 COMPRESSED AIR FILTER ELEMENT 1 M 60E-FIE- 50 COMPRESSED AIR FILTER ELEMENT 1 M 60E-FIE- 49 DIGITAL CONTROLLER 1 M 130E-DPI 48 PLASTIC CONTROL PANEL 1 M 170E-PCP 47 CONTROLLER PANEL 1 M 60E-COP 46 REDUCTION 1 / 2" - 1 / 4" 2 M 260E-RDC 45 90* 1 / 4" - 6mm ELBOW 1 M 170E-EWF 44 GAS ET FOR DRAIN 1 M 90E-GFD 43 C EC 1 M 170E-C 8 M 260E-STU 42 AL E CA INET STUD AND NUT 41 OLT M4 8 8 M 60E- LT48 40 OLT M4 12 22 M 90E- LT412 39 CA INET REAR TOP 1 M 60E-CRT 38 CA INET INSIDE 1 M 60E-CAI 37 CONNECTION CIT2 2 M 60E-CN 2 36 25ø1* 5 M 60E-ORG 35 COUPLING CLAMP 5 M 60E-CPG 1 M 260E- ALL AL E 34 L 33 COMPRESSED AIR FILTER ELEMENT IT 1 M 60E-EL - 32 COMPRESSED AIR FILTER ELEMENT IT 1 M 60E-EL - 31 CONNECTION CIT1 1 M 60E-CN 1 IG 30 29 28 25 24 1 M 110E- PS ADAPTOR T 1 M 60E-TDP FAN ON OFF SWITC 1 M 260E-FSW 1 M 60E-CPT1 1 M 90E-DRI 1 M 60E- 1 M 70E-RTA3 CUPPER T1 27 26 PRESSURE SWITC DE DRATOR FILTER DRIER E PANSION AL E ROTOLOC ADAPTOR3 EL OW 2 P 1 M 260E-ELW2 22 DRAIN AL E 1 1 M 260E-DRA1 21 SELONOID AL E 1 M 150E-S A 20 ROTOLOC ADAPTOR2 1 M 60E-RTA2 1 M 60E-I E 1 M 60E-E C 4 M 60E-W R22 23 19 18 17 INSULATION OF EAT E C ANGER EAT E C ANGER WAS ER 22 85 25 16 OLT M8 40 4 M 60E- LT840 15 START RELA 1 M 50E-STR 14 O ERLOAD PROTECTOR 1 M 50E-O P 13 START CAPACITOR 1 M 50E-SCR 12 COMPRESSOR ELECTRICAL O 1 M 50E-CE 11 COMPRESSOR 1 M 50E-CMP 9 M 50E-R T3 5 1 M 50E-W R20 10 09 RI ET WAS ER 35 20 43 15 08 OLT M4 14 1 M 50E- LT414 07 NUT M4 4 M 50E-NT4 06 OLT M6 20 4 M 50E- LT620 05 FAN 1 M 50E-FMT 04 )$1*5ø// 1 M 50E-GRL 03 FAN LADE 1 M 50E-FAN 02 CONDANSER 1 M 50E-CON 01 CA INET ASE 1 M 60E-CA MATERIAL NAME T SPARE PART RE CODE ITEM NO PART LIST Page 63 49 48 59 Page 64 44 47 58 60 62 55 54 61 52 1 53 40 14 15 13 10 2 29 30 16 12 17 57 10 56 42 11 28 27 8 9 26 25 51 20 24 31 7 3 6 23 A 33 45 4 65 21 66 67 67 34 46 5 64 38 40 63 22 43 32 39 36 37 50 41 19 A 18 35 8.1 - ED & Spare Part List MKE 190 8.1 - ED & Spare Part List MKE 190 67 1 4 -6 3 M 150E-FIT6 66 SOLENOID AL E COIL FITTINGS 1 M 260E-S C 65 1 4 NIPPLE 2 M 170E-NIP1 4 64 1 4 T CONNECTOR 1 M 170E-T1 4 63 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 62 POWER CA LE 1 M 130E-PWC 61 CA LE GLAND PG11 1 M 260E-CG11 60 OLT M6 15 4 M 90E- LT615 59 CA INET TOP 1 M 60E-CAT 58 CA INET RIG T 1 M 60E-C R 57 CA LE STRAP 3 M 90E-CSP 56 CA INET FASTENER 8 M 260E-CFS 55 CA INET STRIPPING 2 M 60E-CSG 54 CA INET 4 M 260E-CA ANDLE 53 CA INET LEFT 1 M 60E-CLT 52 RI ET NUT M8 4 M 260E-RNT8 51 COMPRESSED AIR FILTER ELEMENT 1 M 60E-FIE- 50 COMPRESSED AIR FILTER ELEMENT 1 M 60E-FIE- 49 DIGITAL CONTROLLER 1 M 130E-DPI 48 PLASTIC CONTROL PANEL 1 M 170E-PCP 47 CONTROLLER PANEL 1 M 60E-COP 46 REDUCTION 1 / 2" - 1 / 4" 2 M 260E-RDC 45 90* 1 / 4" - 6mm ELBOW 1 M 170E-EWF 44 GAS ET FOR DRAIN 1 M 90E-GFD 43 C EC 1 M 170E-C 8 M 260E-STU 42 AL E CA INET STUD AND NUT 41 OLT M4 8 8 M 60E- LT48 40 OLT M4 12 22 M 90E- LT412 39 CA INET REAR TOP 1 M 60E-CRT 38 CA INET INSIDE 1 M 60E-CAI 37 CONNECTION CIT2 2 M 60E-CN 2 36 25ø1* 5 M 60E-ORG 35 COUPLING CLAMP 5 M 60E-CPG 1 M 260E- ALL AL E 34 L 33 COMPRESSED AIR FILTER ELEMENT IT 1 M 60E-EL - 32 COMPRESSED AIR FILTER ELEMENT IT 1 M 60E-EL - 31 CONNECTION CIT1 1 M 60E-CN 1 30 IG PRESSURE SWITC 1 M 110E- PS 29 ADAPTOR T 1 M 60E-TDP 28 FAN ON OFF SWITC 1 M 260E-FSW 1 M 60E-CPT1 1 M 90E-DRI 1 M 60E- 1 M 70E-RTA3 CUPPER T1 27 26 25 24 DE DRATOR FILTER DRIER E PANSION AL E ROTOLOC ADAPTOR3 EL OW 2 P 1 M 260E-ELW2 22 DRAIN AL E 1 1 M 260E-DRA1 21 SELONOID AL E 1 M 150E-S A 20 ROTOLOC ADAPTOR2 1 M 60E-RTA2 1 M 60E-I E 1 M 60E-E C 4 M 60E-W R22 23 19 18 17 INSULATION OF EAT E C ANGER EAT E C ANGER WAS ER 22 85 25 16 OLT M8 40 4 M 60E- LT840 15 START RELA 1 M 60E-STR 14 O ERLOAD PROTECTOR 1 M 60E-O P 13 START CAPACITOR 1 M 60E-SCR 12 COMPRESSOR ELECTRICAL O 1 M 60E-CE 11 COMPRESSOR 1 M 60E-CMP 9 M 60E-R T3 5 1 M 60E-W R20 10 09 RI ET WAS ER 35 20 43 15 08 OLT M4 14 1 M 60E- LT414 07 NUT M4 4 M 60E-NT4 06 OLT M6 20 4 M 60E- LT620 05 FAN 1 M 60E-FMT 04 )$1*5ø// 1 M 60E-GRL 03 FAN LADE 1 M 60E-FAN 02 CONDANSER 1 M 60E-CON 01 CA INET ASE 1 M 60E-CA T SPARE PART RE CODE ITEM NO MATERIAL NAME PART LIST Page 65 70 71 57 56 69 Page 66 55 62 63 67 60 1 23 24 12 22 54 68 61 52 29 10 28 38 40 65 66 64 27 26 37 35 33 25 31 21 36 72 52 74 59 74 73 53 39 30 A 42 44 10 48 34 A 41 46 18 19 16 43 10 2 58 32 20 50 17 45 51 13 14 49 11 8 7 9 15 6 3 47 4 5 8.1 - ED & Spare Part List MKE 210 8.1 - ED & Spare Part List MKE 210 74 1 / 4" - 6mm FITTINGS 73 SOLENOID VALVE COIL 3 M 150E-FIT6 1 M 260E-S C 1 / 4" NIPPLE 2 M 170E-NIP1 4 71 POWER CA LE 1 M 130E-PWC 70 CA LE GLAND PG11 1 M 260E-CG11 69 CA INET TOP 1 M 90E-CAT 68 OLT M6 15 4 M 90E- LT615 67 CA INET LEFT 1 M 90E-CLT 66 RI ET 6 M 90E-R T3 5 65 CA LE STRAP 6 M 90E-CSP 64 CA INET FASTENER 8 M 260E-CFS 63 CA INET STRIPPING 2 M 90E-CSG ANDLE 4 M 260E-CA 61 CA INET RIG T 1 M 90E-C R 60 RI ET NUT M8 4 M 260E-RNT8 72 35 CA INET 62 59 1 / 4" T CONNECTOR 1 M 170E-T1 4 58 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 57 DIGITAL CONTROLLER 1 M 130E-DPI 56 PLASTIC CONTROL PANEL 1 M 110E-PCP 55 CONTROLLER PANEL 1 M 90E-COP 54 GAS ET FOR DRAIN 1 M 90E-GFD 53 REDUCTION 1 / 2" - 1 / 4" 2 M 260E-RDC 52 BALL VALVE 1 M 260E- 51 OLT M6 10 8 M 90E- LT610 50 CA INET REAR TOP 49 CA INET INSIDE 48 CONNECTION CIT2 L 1 M 90E-CRT 1 M 90E-CAI 2 M 90E-CN 2 5 M 90E-CPG 46 COMPRESSED AIR FILTER ELEMENT 1 M 90E-FIE- 45 COMPRESSED AIR FILTER ELEMENT 1 M 90E-FIE- 44 COMPRESSED AIR FILTER ELEMENT IT 1 M 90E-EL - 43 COMPRESSED AIR FILTER ELEMENT IT 1 M 90E-EL - COUPLING CLAMP 47 42 25ø1* 5 M 90E-ORG 41 CONNECTION CIT1 1 M 90E-CN 1 1 M 260E-FNS 1 M 110E- PS 1 M 90E-TDP 1 M 90E-CPT2 40 FAN ON OFF SWITC 39 IG CUPPER T2 37 36 PRESSURE SWITC ADAPTOR T 38 DE DRATOR FILTER DRIER 35 E PANSION AL E 34 ROTOLOC ADAPTOR2 33 EL OW 2 1 M 90E-DRI 1 M 100E-E P 2 M 260E-RTA2 1 M 260E-ELW2 32 DRAIN AL E 1 1 M 130E-DRA1 31 SELONOID AL E 1 M 130E-S A 1 M 110E-RTA2 1 M 90E-I E 1 M 90E-E C 4 M 260E-STU 2 M 90E-R T4 1 M 170E-EWF 30 29 28 27 26 25 ROTOLOC ADAPTOR2 INSULATION OF EAT E C ANGER EAT E C ANGER CA INET STUD AND NUT RI ET 45 90* 1 / 4" - 6mm ELBOW 24 START RELA 1 M 90E-STR 23 T ERMINAL LOC 1 M 90E-TRM 1 M 90E-SCR 1 M 90E-EL S 1 M 170E-C 4 M 90E-W R22 22 21 START CAPACITOR ELECTRICAL O LOWER SUPPORT PLATE 20 C EC AL E 19 WAS ER 22 85 25 18 OLT M8 40 4 M 90E- LT840 17 CUPPER T1 2 M 90E-CPT1 16 -PASS AL E 1 M 130E- ROTOLOC ADAPTOR1 1 M 260E-RTA1 SETTING T E CONNECTION 1 M 150E-STC O ERLOAD PROTECTOR 1 M 70E-O P 1 M 70E-CE 15 14 13 12 COMPRESSOR ELECTRICAL O P 11 COMPRESSOR 1 M 70E-CMP 10 OLT M4 12 30 M 90E- LT412 1 M 90E-W R 09 WAS ER 20 43 15 08 OLT M4 14 1 M 90E- LT414 07 NUT M4 4 M 90E-NT4 06 OLT M6 30 4 M 260E- LT630 05 FAN 1 M 70E-FMT 04 )$1*5ø// 1 M 70E-FGR 03 FAN LADE 1 M 70E-FAN 02 CONDANSER 1 M 70E-CON 01 CA INET ASE 1 M 90E-CA ITEM NO MATERIAL NAME T SPARE PART CODE RE PART LIST Page 67 70 71 57 56 69 Page 68 55 62 63 67 60 1 23 24 12 22 54 68 61 52 29 10 28 38 40 65 66 64 27 26 37 35 33 25 31 21 36 72 52 74 59 74 73 53 39 30 A 42 44 10 48 34 A 41 46 18 19 16 43 10 2 58 32 20 50 17 45 51 13 14 49 11 8 7 9 15 6 3 47 4 5 8.1 - ED & Spare Part List MKE 305 8.1 - ED & Spare Part List MKE 305 74 1 / 4" - 6mm FITTINGS 3 M 150E-FIT6 73 SOLENOID VALVE COIL 1 M 260E-S C M 170E-NIP1 4 72 1 / 4" NIPPLE 2 71 POWER CA LE 1 M 130E-PWC 70 CA LE GLAND PG11 1 M 260E-CG11 69 CA INET TOP 1 M 90E-CAT 68 OLT M6 15 4 M 90E- LT615 67 CA INET LEFT 1 M 90E-CLT 66 RI ET 6 M 90E-R T3 5 65 CA LE STRAP 6 M 90E-CSP 64 CA INET FASTENER 8 M 260E-CFS 63 CA INET STRIPPING 2 M 90E-CSG ANDLE 4 M 260E-CA 61 CA INET RIG T 1 M 90E-C R 60 RI ET NUT M8 4 M 260E-RNT8 35 CA INET 62 59 1 / 4" T CONNECTOR 1 M 170E-T1 4 58 REDUCTION 3/8" - 1/4" 1 M 150E-RDC 57 DIGITAL CONTROLLER 1 M 130E-DPI 56 PLASTIC CONTROL PANEL 1 M 110E-PCP 55 CONTROLLER PANEL 1 M 90E-COP 54 GAS ET FOR DRAIN 1 M 90E-GFD 53 REDUCTION 1 / 2" - 1 / 4" 2 M 260E-RDC 52 BALL VALVE 1 M 260E- 51 OLT M6 10 8 M 90E- LT610 50 CA INET REAR TOP CA INET INSIDE 49 L 1 M 90E-CRT 1 M 90E-CAI 48 CONNECTION CIT2 2 M 90E-CN 2 47 COUPLING CLAMP 5 M 90E-CPG 46 COMPRESSED AIR FILTER ELEMENT 1 M 90E-FIE- 45 COMPRESSED AIR FILTER ELEMENT 1 M 90E-FIE- 44 COMPRESSED AIR FILTER ELEMENT IT 1 M 90E-EL - 43 COMPRESSED AIR FILTER ELEMENT IT 1 M 90E-EL - 42 25ø1* 5 M 90E-ORG 41 CONNECTION CIT1 1 M 90E-CN 1 1 M 260E-FNS 1 M 110E- PS 1 M 90E-TDP 1 M 90E-CPT2 40 FAN ON OFF SWITC 39 IG ADAPTOR T 38 CUPPER T2 37 36 PRESSURE SWITC DE DRATOR FILTER DRIER 35 E PANSION AL E 34 ROTOLOC ADAPTOR2 33 EL OW 2 1 M 90E-DRI 1 M 100E-E P 2 M 260E-RTA2 1 M 260E-ELW2 32 DRAIN AL E 1 1 M 130E-DRA1 31 SELONOID AL E 1 M 130E-S A 1 M 110E-RTA2 1 M 90E-I E 1 M 90E-E C 4 M 260E-STU 2 M 90E-R T4 1 M 170E-EWF 30 29 28 27 26 25 ROTOLOC ADAPTOR2 INSULATION OF EAT E C ANGER EAT E C ANGER CA INET STUD AND NUT RI ET 45 90* 1 / 4" - 6mm ELBOW 24 START RELA 1 M 90E-STR 23 T ERMINAL LOC 1 M 90E-TRM 1 M 90E-SCR 1 M 90E-EL S 1 M 170E-C 4 M 90E-W R22 22 21 START CAPACITOR ELECTRICAL O LOWER SUPPORT PLATE 20 C EC AL E 19 WAS ER 22 85 25 18 OLT M8 40 4 M 90E- LT840 17 CUPPER T1 2 M 90E-CPT1 -PASS AL E 1 M 130E- 1 M 260E-RTA1 SETTING T E CONNECTION 1 M 150E-STC O ERLOAD PROTECTOR 1 M 80E-O P 1 M 80E-CE 16 15 14 13 12 ROTOLOC ADAPTOR1 COMPRESSOR ELECTRICAL O P 11 COMPRESSOR 1 M 80E-CMP 10 OLT M4 12 30 M 90E- LT412 1 M 90E-W R 09 WAS ER 20 43 15 08 OLT M4 14 1 M 90E- LT414 07 NUT M4 4 M 90E-NT4 06 OLT M6 30 4 M 260E- LT630 05 FAN 1 M 90E-FMT 04 )$1*5ø// 1 M 90E-FGR 03 FAN LADE 1 M 90E-FAN 02 CONDANSER 1 M 90E-CON 01 CA INET ASE 1 M 90E-CA ITEM NO MATERIAL NAME T SPARE PART CODE RE PART LIST Page 69 70 71 57 56 69 Page 70 55 62 63 67 60 1 23 24 12 22 54 68 61 52 29 10 28 38 40 65 66 64 27 26 37 33 25 31 21 36 72 52 59 74 73 74 53 35 A 39 30 42 44 10 48 34 A 41 46 18 19 16 43 10 2 58 32 20 50 17 45 51 13 14 49 11 8 7 9 15 6 3 47 4 5 8.1 - ED & Spare Part List MKE 375 8.1 - ED & Spare Part List MKE 375 74 1 / 4" - 6mm FITTINGS 3 MK150E-FIT6 73 SOLENOID VALVE COIL 1 MK260E-SVC MK170E-NIP1 4 72 1 / 4" NIPPLE 2 71 POWER CABLE 1 MK130E-PWC 70 CABLE GLAND PG11 1 MK260E-CG11 69 CABINET TOP 1 MK90E-CAT 68 BOLT M6 15 4 MK90E-BLT615 67 CABINET LEFT 1 MK90E-CLT 66 RIVET 6 MK90E-RVT3 5 65 CABLE STRAP 6 MK90E-CSP 64 CABINET FASTENER 8 MK260E-CFS 63 CABINET STRIPPING 2 MK90E-CSG 35 62 CABINET HANDLE 4 MK260E-CAH 61 CABINET RIGHT 1 MK90E-CBR 60 RIVET NUT M8 4 MK260E-RNT8 59 1 / 4" T CONNECTOR 1 MK170E-T1 4 58 REDUCTION 3/8" - 1/4" 1 MK150E-RDC 57 DIGITAL CONTROLLER 1 MK130E-DPI 56 PLASTIC CONTROL PANEL 1 MK110E-PCP 55 CONTROLLER PANEL 1 MK90E-COP 54 GASKET FOR DRAIN 1 MK90E-GFD 53 REDUCTION 1 / 2" - 1 / 4" 2 MK260E-RDC 52 BALL VALVE 1 MK260E-BVL 51 BOLT M6 10 8 MK90E-BLT610 50 CABINET REAR TOP 1 MK90E-CRT 49 CABINET INSIDE 1 MK90E-CAI 48 CONNECTION CIT2 2 MK90E-CNK2 47 COUPLING CLAMP 5 MK90E-CPG 46 COMPRESSED AIR FILTER ELEMENT Y 1 MK90E-FIE-Y 45 COMPRESSED AIR FILTER ELEMENT X 1 MK90E-FIE-X 44 COMPRESSED AIR FILTER ELEMENT KIT Y 1 MK90E-ELK-Y 43 COMPRESSED AIR FILTER ELEMENT KIT X 1 MK90E-ELK-X 42 25ø1* 5 MK90E-ORG 41 CONNECTION CIT1 1 MK90E-CNK1 40 FAN ON OFF SWITCH 1 MK260E-FNS 39 HIGH PRESSURE SWITCH 1 MK110E-HPS 1 MK90E-TDP 1 MK90E-CPT2 38 37 36 ADAPTOR T CUPPER T2 DEHYDRATOR FILTER DRIER 35 EXPANSION VALVE 34 ROTOLOCK ADAPTOR2 33 ELBOW 2 1 MK90E-DRI 1 MK100E-EXP 2 MK260E-RTA2 1 MK260E-ELW2 32 DRAIN VALVE 1 1 MK130E-DRA1 31 SELONOID VALVE 1 MK130E-SVA 1 MK110E-RTA2 1 MK90E-IHE 1 MK90E-EXC 4 MK260E-STU 2 MK90E-RVT4 30 29 28 27 26 ROTOLOCK ADAPTOR2 INSULATION OF HEAT EXCHANGER HEAT EXCHANGER CABINET STUD AND NUT RIVET 45 90* 1 / 4" - 6mm ELBOW 1 MK170E-EWF 24 START RELAY 1 MK90E-STR 23 THERMINAL BLOCK 1 MK90E-TRM 22 START CAPACITOR 1 MK90E-SCR 25 21 ELECTRICAL BOX LOWER SUPPORT PLATE 1 MK90E-ELBS 20 CHECH VALVE 1 MK170E-CHV 19 WASHER 4 MK90E-WHR22 4 MK90E-BLT840 18 22 85 25 BOLT M8 40 17 CUPPER T1 2 MK90E-CPT1 16 BY-PASS VALVE 1 MK130E-BYP 15 ROTOLOCK ADAPTOR1 1 MK260E-RTA1 14 SETTING THE CONNECTION 1 MK150E-STC 13 OVERLOAD PROTECTOR 1 MK100E-OVP 12 COMPRESSOR ELECTRICAL BOX 1 MK100E-CEB 11 COMPRESSOR 1 MK100E-CMP 10 BOLT M4 12 30 MK90E-BLT412 1 MK90E-WHR 1 MK90E-BLT414 4 MK90E-NT4 09 08 07 WASHER 20 43 15 BOLT M4 14 NUT M4 06 BOLT M6 30 4 MK260E-BLT630 05 FAN 1 MK90E-FMT 04 )$1*5ø// 1 MK90E-FGR 03 FAN BLADE 1 MK90E-FAN 02 CONDANSER 1 MK90E-CON 01 CABINET BASE 1 MK90E-CAB ITEM NO. MATERIAL NAME QTY SPARE PART CODE REV PART LIST Page 71 Page 72 62 70 66 6 64 72 73 69 56 65 74 68 60 59 1 12 7 14 9 17 18 13 78 61 77 63 71 67 58 16 55 7 8 11 19 2 15 54 21 22 80 57 79 23 24 25 32 31 6 3 75 7 33 34 4 26 5 27 41 82 10 20 85 34 49 28 84 30 53 52 85 35 37 29 83 36 48 51 50 86 81 38 82 85 76 42 43 45 47 40 39 46 44 8.1 - ED & Spare Part List MKE 495 8.1 - ED & Spare Part List MKE 495 86 90 1 4 - 6 85 1 4 -6 84 1 4 T CONNECTOR 83 ELBOW FITTINGS 1 / 4" NIPPLE 1 MK170E-EWF 3 MK150E-FIT6 1 MK170E-T1 4 2 MK170E-NIP1 4 82 REDUCTION 1 2 - 1 4 2 MK260E-RDC 81 SOLENOID VALVE COIL 1 MK260E-SVC 80 WASHER 1 MK110E-WHR 79 BOLT M4 14 1 MK110E-BLT414 78 POWER CABLE 1 MK130E-PWC 1 MK260E-CG11 77 20 43 15 CABLE GLAND PG11 76 BOLT M8 15 8 MK170E-BLT815 75 BOLT M8 30 3 MK260E-BLT830 74 CABINET TOP 1 MK110E-CAT 73 CABINET HANDLE 6 MK260E-CAH 72 CABINET LOWER RIGHT 1 MK110E-CLR 71 CABINET REAR BOTTOM 1 MK110E-CRB 70 CABINET BOTTOM LEFT 1 MK110E-CBL 69 CABINET FRONT BOTTOM 1 MK110E-CFB 68 CABINET UPPER RIGHT 1 MK110E-CUR 67 CABINET REAR TOP 1 MK110E-CRT 16 MK260E-NUT 65 CABINET FASTENER 14 MK260E-CFS 64 CABINET INSIDE 1 MK110E-CAI 63 CABINET UPPER LEFT 1 62 CABINET LEG3 2 MK110E-CAL3 61 CABINET LEG2 1 MK110E-CAL2 60 CABINET LEG1 1 MK110E-CAL1 DRAIN SLEEVE 1 66 59 58 57 CAGE NUTS DIGITAL CONTROLLER NUT M4 56 CABINET STUD AND NUT 55 PLASTIC CONTROL PANEL 54 CONTROLLER PANEL MK110E-CUL MK150E-DRS 1 MK130E-DPI 4 MK110E-NT4 14 MK260E-STU 1 MK110E-PCP 1 MK110E-COP MK150E-NT10 NUT M10 1 52 LIQUID RECEVIER 1 MK110E-LIQ 51 T CONNECTION FOR SWITCH CAPILLARY 1 MK260E-TSC HIGH PRESSURE SWITCH 1 MK260E-HPS FAN ON OFF SWITCH 53 50 1 MK260E-FNS 48 DEHYDRATOR FILTER DRIER 1 MK100E-DRI 47 EXPANSION VALVE 1 MK100E-EXP 1 MK260E-DFD 1 MK260E-FTT2 1 MK260E-ELW 49 46 45 44 DRAIN FIXING DEVICE FITTING 2 ELBOW FITTING MK170E-FTT1 43 FITTING 1 1 42 ORING 4 MK170E-ORG 41 COMPRESSED AIR FILTER ELEMENT Y 1 MK110E-FIE-Y 40 COMPRESSED AIR FILTER ELEMENT X 1 MK110E-FIE-X 2 MK110E-CNK3 38 COMPRESSED AIR FILTER ELEMENT KIT X 1 MK110E-ELK-X 37 COMPRESSED AIR FILTER ELEMENT KIT Y 1 MK110E-ELK-Y 39 CONNECTION CIT3 MK170E-CPG2 36 COUPLING CLAMP2 4 35 CONNECTION CIT2 1 MK110E-CNK2 2 MK260E-BVL CONNECTION CIT1 1 MK110E-CNK1 ELBOW 2 2 MK170E-ELW2 4 MK260E-CPG1 1 MK110E-IHE 1 MK130E-SLV 34 33 32 31 30 29 BALL VALVE COUPLING CLAMP1 INSULATION OF HEAT EXCHANGER SELONOID VALVE 28 DRAIN NUT 1 MK260E-DRN 27 DRAIN BALL VALVE 1 MK260E-DBV 26 ELBOW 2 1 MK260E-ELW2 25 BY-PASS VALVE 1 MK130E-BYP 24 CUPPER T2 1 MK260E-CPT2 23 CUPPER T1 1 MK260E-CPT1 22 ROTOLOCK ADAPTOR3 1 MK260E-RTA3 21 ROTOLOCK ADAPTOR2 1 MK260E-RTA2 20 HEAT EXCHANGER 1 MK110E-EXC 19 RUN CAPACITOR 1 MK100E-RUN 18 7+(50ø1$/%/2&. 1 MK110E-TRM 1 MK110E-STR 1 MK110E-SCR 17 START RELAY 16 START CAPACITOR 15 ELECTRICAL BOX 14 BOLT M8 40 1 MK110E-ELB 4 MK150E-BLT840 13 SETTING THE CONNECTION 1 MK150E-STC 12 ROTOLOCK ADAPTOR1 1 MK260E-RTA1 11 OVERLOAD PROTECTOR 1 MK100E-OVP 10 CHECH VALVE 1 MK170E-CHV 09 COMPRESSOR 1 MK100E-CMP 08 BOLT M8 25 4 MK150E-BLT825 07 06 05 WASHER 22 8 2 2 4 BOLT M6 30 FAN 11 MK260E-WHR 20 MK260E-BLT630 1 MK110E-FMT 04 )$1*5ø// 1 MK110E-FGR 03 FAN BLADE 1 MK110E-FAN 02 CONDANSER 1 MK110E-CON 01 CABINET BASE 1 MK110E-CAB ITEM NO. MATERIAL NAME QTY SPARE PART CODE REV PART LIST Page 73 Page 74 62 70 66 6 64 72 73 69 56 65 74 68 60 59 1 12 7 14 9 17 18 13 78 61 77 63 71 67 58 16 55 7 8 11 19 2 15 54 21 22 80 57 79 23 24 25 32 31 6 3 75 7 33 34 4 26 5 27 41 82 10 20 85 34 49 28 84 30 53 52 85 35 37 29 83 36 48 51 50 86 81 38 82 85 76 42 43 45 47 40 39 46 44 8.1 - ED & Spare Part List MKE 623 8.1 - ED & Spare Part List MKE 623 86 90 1 4 - 6 85 1 4 -6 84 1 4 T CONNECTOR 83 ELBOW FITTINGS 1 / 4" NIPPLE 1 MK170E-EWF 3 MK150E-FIT6 1 MK170E-T1 4 2 MK170E-NIP1 4 82 REDUCTION 1 2 - 1 4 2 MK260E-RDC 81 SOLENOID VALVE COIL 1 MK260E-SVC 80 WASHER 79 78 77 76 1 MK110E-WHR BOLT M4 14 1 MK110E-BLT414 POWER CABLE 1 MK130E-PWC 1 MK260E-CG11 8 MK170E-BLT815 20 43 15 CABLE GLAND PG11 BOLT M8 15 3 MK260E-BLT830 1 MK110E-CAT 73 CABINET HANDLE 6 MK260E-CAH 72 CABINET LOWER RIGHT 1 MK110E-CLR 71 CABINET REAR BOTTOM 1 MK110E-CRB 70 CABINET BOTTOM LEFT 1 MK110E-CBL 69 CABINET FRONT BOTTOM 1 MK110E-CFB 68 CABINET UPPER RIGHT 1 MK110E-CUR 67 CABINET REAR TOP 75 74 BOLT M8 30 CABINET TOP 1 MK110E-CRT 16 MK260E-NUT 65 CABINET FASTENER 14 MK260E-CFS 64 CABINET INSIDE 1 MK110E-CAI 63 CABINET UPPER LEFT 1 MK110E-CUL 62 CABINET LEG3 2 MK110E-CAL3 61 CABINET LEG2 1 MK110E-CAL2 60 CABINET LEG1 1 MK110E-CAL1 DRAIN SLEEVE 1 66 59 58 57 CAGE NUTS DIGITAL CONTROLLER NUT M4 56 CABINET STUD AND NUT 55 PLASTIC CONTROL PANEL MK150E-DRS 1 MK130E-DPI 4 MK110E-NT4 14 MK260E-STU 1 MK110E-PCP 1 MK110E-COP NUT M10 1 MK150E-NT10 52 LIQUID RECEVIER 1 MK110E-LIQ 51 T CONNECTION FOR SWITCH CAPILLARY 1 MK260E-TSC 50 HIGH PRESSURE SWITCH 1 MK260E-HPS FAN ON OFF SWITCH 54 53 CONTROLLER PANEL 1 MK260E-FNS 48 DEHYDRATOR FILTER DRIER 1 MK110E-DRI 47 EXPANSION VALVE 1 MK110E-EXP 1 MK260E-DFD 1 MK260E-FTT2 49 46 45 DRAIN FIXING DEVICE FITTING 2 1 MK260E-ELW 43 FITTING 1 1 MK170E-FTT1 42 ORING 4 MK170E-ORG 1 MK110E-FIE-Y 44 ELBOW FITTING 41 COMPRESSED AIR FILTER ELEMENT Y 40 COMPRESSED AIR FILTER ELEMENT X 39 CONNECTION CIT3 38 COMPRESSED AIR FILTER ELEMENT KIT X 37 COMPRESSED AIR FILTER ELEMENT KIT Y 1 MK110E-FIE-X 2 MK110E-CNK3 1 MK110E-ELK-X 1 MK110E-ELK-Y 36 COUPLING CLAMP2 4 MK170E-CPG2 35 CONNECTION CIT2 1 MK110E-CNK2 34 33 32 31 30 29 2 MK260E-BVL CONNECTION CIT1 1 MK110E-CNK1 ELBOW 2 2 MK170E-ELW2 4 MK260E-CPG1 1 MK110E-IHE 1 MK130E-SLV BALL VALVE COUPLING CLAMP1 INSULATION OF HEAT EXCHANGER SELONOID VALVE 28 DRAIN NUT 1 MK260E-DRN 27 DRAIN BALL VALVE 1 MK260E-DBV 26 ELBOW 2 1 MK260E-ELW2 25 BY-PASS VALVE 1 24 CUPPER T2 23 CUPPER T1 MK130E-BYP 1 MK260E-CPT2 1 MK260E-CPT1 22 ROTOLOCK ADAPTOR3 1 MK260E-RTA3 21 ROTOLOCK ADAPTOR2 1 MK260E-RTA2 20 HEAT EXCHANGER 1 MK110E-EXC 19 RUN CAPACITOR 1 MK110E-RUN 18 7+(50ø1$/%/2&. 1 MK110E-TRM 1 MK110E-STR 16 START CAPACITOR 1 MK110E-SCR 15 ELECTRICAL BOX 1 MK110E-ELB 4 MK150E-BLT840 17 14 START RELAY BOLT M8 40 13 SETTING THE CONNECTION 1 MK150E-STC 12 ROTOLOCK ADAPTOR1 1 MK260E-RTA1 11 OVERLOAD PROTECTOR 1 MK110E-OVP 10 CHECH VALVE 1 MK170E-CHV 09 COMPRESSOR 1 MK110E-CMP 08 BOLT M8 25 4 MK150E-BLT825 11 MK260E-WHR 20 MK260E-BLT630 1 MK110E-FMT )$1*5ø// 1 MK110E-FGR 03 FAN BLADE 1 MK110E-FAN 02 CONDANSER 1 MK110E-CON 01 CABINET BASE 1 MK110E-CAB 07 06 05 04 ITEM NO. WASHER 22 8 2 2 4 BOLT M6 30 FAN MATERIAL NAME QTY SPARE PART CODE REV PART LIST Page 75 Page 76 75 73 80 83 81 74 66 38 79 69 62 71 68 72 70 83 65 1 78 16 13 37 82 67 15 76 77 14 60 45 21 20 22 19 54 55 59 5 6 47 46 5 6 29 2 28 30 10 9 7 11 23 4 24 31 27 18 42 25 56 42 5 3 26 40 12 52 32 61 57 34 58 48 51 41 42 39 35 57 53 49 17 84 33 36 85 42 44 50 5 6 8.1 - ED & Spare Part List MKE 930 8.1 - ED & Spare Part List MKE 930 COMPRESSED AIR FILTER ELEMENT Y COMPRESSED AIR FILTER ELEMENT X 65 MK130E-FIE-X CONDUIT FOR CONTROL PANEL 1 MK190E-CFS MK260E-CCP BOLT M8 25 24 MK260E-BLT826 CAGE NUTS M6 MK260E-CGN6 CABINET FASTENER 24 14 CABINET TOP 1 MK130E-CAT CABINET REAR TOP 1 MK130E-CRT CABINET REAR BOTTOM 1 MK130E-CRB CABINET BOTTOM LEFT 1 MK130E-CBL CABINET INSIDE 1 MK130E-CAI CABINET UPPER LEFT 1 MK130E-CUL CABINET HANDLE 6 MK260E-CAH CONTROLLER PANEL 1 MK130E-COP CABINET UPPER RIGHT 1 MK130E-CUR CABINET FRONT BOTTOM 1 MK130E-CFB CABINET LOWER RIGHT 1 MK130E-CLR CABINET LEG3 1 MK130E-CAL3 CABINET LEG2 2 MK130E-CAL2 CABINET LEG1 1 MK130E-CAL1 NA 63 62 MAIN SWITCH 60 59 MK130E-FIE-Y 4 64 61 1 1 REMOVABLE SHIELD MK260E-CFS NA NA NA 1 MK190E-MNS 1 MK260E-BVL DEWPOINT INDICATOR 1 MK130E-DPI PLASTIC CONTROL PANEL 1 MK260E-PCP 1 MK260E-SVC BALL VALVE 58 SOLENOID VALVE COIL 57 REDUCTION 1 2 - 1 4 2 MK260E-RDC 56 1 4 T CONNECTOR 1 MK170E-T1 4 55 HIGH PRESSURE SWICH 1 MK130E-HPS 54 53 SUPPORT PLATE UNCTION 1 MK130E-SP MK170E-BLT815 52 51 SEPARATOR 8 1 NUT M10 1 MK150E-NT10 LIQUID RECEIVER 1 MK130E-LIQ T CONNECTION FOR SWITCH CAPILLARY 1 MK260E-TSC FAN ON OFF SWITCH 1 MK260E-FNS 1 MK150E-FDC 1 MK150E-DRI 1 MK150E-EXP 1 MK150E-DRS 4 MK150E-FIT6 50 49 48 BOLT M8 15 FILTER DRIER CLAMP 46 45 44 43 DEHYDRATOR FILTER DRIER EXPANSION VALVE DRAIN SLEEVE NA 42 1 4 -6 41 ELBOW FITTING MK130E-SPR NA FITTINGS 1 MK260E-EWF 40 1 4 NIPPLE 2 MK170E-NIP1 4 39 25ø1* 4 MK170E-ORG 38 CABINET STUD AND NUT 14 MK260E-STU 37 POWER BOX 1 MK130E-PBX CONNECTION CIT3 2 MK130E-CNK3 35 COMPRESSED AIR FILTER ELEMENT KIT X 1 MK130E-ELK-X 34 COMPRESSED AIR FILTER ELEMENT KIT Y 1 MK130E-ELK-Y 4 MK170E-CPG2 36 33 COUPLING CLAMP2 32 CONNECTION CIT2 31 30 29 28 2 MK130E-CNK2 1 MK260E-BVL CONNECTION CIT1 1 MK130E-CNK1 ELBOW2 2 3 MK170E-ELW2 BALL VALVE COUPLING CLAMP1 MK260E-CPG1 27 CHECH VALVE 1 MK170E-CHV 26 SELENOID VALVE 1 MK130E-SVA DRAIN NUT 1 MK260E-DRN DRAIN VALVE1 1 MK260E-DRA1 ELBOW2 1 MK260E-ELW2 22 BY-PASS VALVE 1 MK130E-BYP 21 CUPPER T1 1 MK260E-CPT1 20 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 25 24 23 1 MK260E-RTA2 19 ROTOLOCK ADAPTOR3 1 MK260E-RTA3 18 17 HEAT EXCHANGER 1 MK130E-EXC RUN CAPACITOR 1 MK130E-RUN 1 MK130E-TRM 15 THERMINAL BLOCK START RELAY 1 MK130E-STR 14 START CAPACITOR 1 MK130E-SCR 13 ELECTRICAL BOX 1 4 MK130E-ELB 16 12 BOLT M8 50 MK260E-BLT850 SETTING THE CONNECTION ROTOLOCK ADAPTOR2 1 MK150E-STC 10 1 MK130E-RTA2 09 ROTOLOCK ADAPTOR1 1 MK130E-RTA1 11 08 NA 07 COMPRESSOR 06 BOLT M8 25 05 04 03 WASHER MK260E-WHR22 MK260E-BLT630 BOLT M6 30 02 01 CABINET BASE MK120E-CMP MK150E-BLT825 22 8 2 2 4 FAN CONDANSER ITEM NO. NA 1 MK120E-FMT MK120E-CON MK130E-CAB MATERIAL NAME QTY SPARE PART CODE REV PART LIST Page 77 Page 78 75 73 80 83 81 74 66 38 79 69 62 71 68 72 70 83 65 1 78 16 13 37 82 67 15 76 77 14 60 45 21 20 22 19 54 55 59 5 6 47 46 5 6 29 2 28 30 10 9 7 11 23 4 24 31 27 18 42 25 56 42 5 3 26 40 12 52 32 61 57 34 58 48 51 41 42 39 35 57 53 49 17 84 33 36 85 42 44 50 5 6 8.1 - ED & Spare Part List MKE 1200 8.1 - ED & Spare Part List MKE 1200 1 MK130E-FIE-Y 1 MK130E-FIE-X REMOVABLE SHIELD 4 MK190E-CFS CONDUIT FOR CONTROL PANEL 1 COMPRESSED AIR FILTER ELEMENT Y COMPRESSED AIR FILTER ELEMENT X 65 24 MK260E-BLT826 24 14 MK260E-CGN6 CABINET FASTENER CABINET TOP 1 MK130E-CAT CABINET REAR TOP 1 MK130E-CRT 1 MK130E-CRB CABINET BOTTOM LEFT 1 MK130E-CBL CABINET INSIDE 1 MK130E-CAI CABINET UPPER LEFT 1 MK130E-CUL CABINET HANDLE 6 MK260E-CAH CONTROLLER PANEL 1 MK130E-COP CABINET UPPER RIGHT 1 MK130E-CUR CABINET FRONT BOTTOM 1 MK130E-CFB CABINET LOWER RIGHT 1 MK130E-CLR CABINET LEG3 1 MK130E-CAL3 CABINET LEG2 2 MK130E-CAL2 CABINET LEG1 1 MK130E-CAL1 NA 63 62 MAIN SWITCH 60 59 MK260E-CFS CABINET REAR BOTTOM 64 61 MK260E-CCP BOLT M8 25 CAGE NUTS M6 NA NA NA 1 MK190E-MNS 1 MK260E-BVL DEWPOINT INDICATOR 1 MK130E-DPI PLASTIC CONTROL PANEL 1 MK260E-PCP 1 MK260E-SVC BALL VALVE 58 SOLENOID VALVE COIL 57 REDUCTION 1 2 - 1 4 2 MK260E-RDC 56 1 4 T CONNECTOR 1 MK170E-T1 4 55 HIGH PRESSURE SWICH 1 MK130E-HPS 54 53 SUPPORT PLATE UNCTION 1 MK130E-SP SEPARATOR 8 1 MK170E-BLT815 52 51 NUT M10 1 MK150E-NT10 LIQUID RECEIVER BOLT M8 15 MK130E-SPR 1 MK130E-LIQ 49 T CONNECTION FOR SWITCH CAPILLARY 1 MK260E-TSC 48 FAN ON OFF SWITCH 1 MK260E-FNS 1 MK150E-FDC 1 MK150E-DRI 1 MK150E-EXP 50 FILTER DRIER CLAMP 46 45 44 43 DEHYDRATOR FILTER DRIER EXPANSION VALVE DRAIN SLEEVE 1 MK150E-DRS 4 MK150E-FIT6 1 MK260E-EWF NA 42 1 4 -6 41 ELBOW FITTING NA FITTINGS 2 MK170E-NIP1 4 39 25ø1* 4 MK170E-ORG 38 CABINET STUD AND NUT 14 MK260E-STU 37 POWER BOX 1 MK130E-PBX 40 1 4 NIPPLE CONNECTION CIT3 2 MK130E-CNK3 35 COMPRESSED AIR FILTER ELEMENT KIT X 1 MK130E-ELK-X 34 COMPRESSED AIR FILTER ELEMENT KIT Y 1 MK130E-ELK-Y 36 33 COUPLING CLAMP2 4 MK170E-CPG2 32 CONNECTION CIT2 2 MK130E-CNK2 1 MK260E-BVL CONNECTION CIT1 1 MK130E-CNK1 ELBOW2 2 3 MK170E-ELW2 31 30 29 28 BALL VALVE COUPLING CLAMP1 MK260E-CPG1 27 CHECH VALVE 1 MK170E-CHV 26 SELENOID VALVE 25 24 23 1 MK130E-SVA DRAIN NUT 1 MK260E-DRN DRAIN VALVE1 1 MK260E-DRA1 ELBOW2 1 MK260E-ELW2 22 BY-PASS VALVE 1 MK130E-BYP 21 CUPPER T1 1 MK260E-CPT1 20 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 1 MK260E-RTA2 19 ROTOLOCK ADAPTOR3 1 MK260E-RTA3 18 17 HEAT EXCHANGER 1 MK130E-EXC RUN CAPACITOR 1 MK130E-RUN THERMINAL BLOCK START RELAY 1 MK130E-TRM 15 1 MK130E-STR 14 START CAPACITOR 1 MK130E-SCR 13 ELECTRICAL BOX 1 MK130E-ELB 4 MK260E-BLT850 16 12 BOLT M8 50 1 MK150E-STC 10 SETTING THE CONNECTION ROTOLOCK ADAPTOR2 1 MK130E-RTA2 09 ROTOLOCK ADAPTOR1 1 MK130E-RTA1 11 08 NA 07 COMPRESSOR 06 BOLT M8 25 05 04 03 WASHER 02 01 CABINET BASE MK130E-CMP MK150E-BLT825 22 8 2 2 4 MK260E-WHR22 MK260E-BLT630 BOLT M6 30 FAN CONDANSER ITEM NO. NA 1 MK130E-FMT MK130E-CON MK130E-CAB MATERIAL NAME QTY SPARE PART CODE REV PART LIST Page 79 77 89 76 1 75 Page 80 74 80 78 79 89 72 73 84 82 83 81 88 86 87 5 6 4 59 58 2 48 56 22 21 57 94 52 47 70 3 5 20 19 55 53 4 49 50 62 61 60 45 8 46 12 13 15 14 17 16 18 11 63 29 7 10 5 64 6 5 5 28 44 23 27 20 90 24 31 25 26 32 39 43 9 92 35 37 44 30 44 51 85 51 33 66 36 41 71 42 44 65 91 34 69 38 40 8.1 - ED & Spare Part List MKE 1388 8.1 - ED & Spare Part List MKE 1388 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. LOW VOLTAGE FUSE HOLDER N/A COMPRESSED AIR FILTER ELEMENT (X) COMPRESSED AIR FILTER ELEMENT (X) ROTOLOCK ADAPTOR2 REMOVABLE SHIELD CAGE NUTS CABINET STUD AND NUT CABINET FASTENER BALL VALVE CABINET TOP CABINET HANDLE CABINET REAR BOTTOM CABINET REAR TOP CABINET LOWER RIGHT CABINET UPPER RIGHT CABINET FRONT BOTTOM CABINET BOTTOM LEFT CABINET LEG3 CABINET LEG2 CABINET LEG1 CABINET INSIDE CABINET UPPER LEFT ELBOW FITTINGS MAIN SWITCH DRAIN SLEEVE DRAIN FIXING DEVICE MEMBRAN VALVE SOLENOID VALVE SOLENOID VALVE COIL DRAIN BALL VALVE ELBOW2 FAN ON/OFF SWITCH HIGH PRESSURE SWICH LOW PRESSURE SWICH TRANSFORMERS PHASE PROTECTION RELAY HIGH VOLTAGE FUSE HOLDER FAN CONTACTOR CONTACTOR N/A ELECTRICAL PANEL DIGITAL CONTROLLER REDUCTION 1 / 2" - 1 / 4" PLASTIC CONTROL PANEL HINGE DOOR LOCK CONDUIT FOR CONTROL PANEL SWITCH CONNECTION FITTING ELECTRICAL BOX 1 / 4" - 6mm FITTINGS BALL VALVE BOLT M8x15 CONNECTION CIT2 COUPLING CLAMP 2 COUPLING CLAMP 1 25ø1* 1 / 4" T CONNECTOR 1 / 4" NIPPLE DRAIN NUT COMPRESSED AIR FILTER ELEMENT KIT (X) COMPRESSED AIR FILTER ELEMENT KIT (Y) COUPLING PIPE ELBOW1 CONNECTION CIT1 CLAMP DRIER-DEHYDRATOR EXPANSION VALVE SENSOR ADAPTOR ROTOLOCK ADAPTOR3 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER HEAT EXCHANGER NUT M10 SEPARATOR BOLT M8x30 LIQUID RECEIVER CUPPER T2 BY-PASS VALVE CUPPER T1 SETTING THE CONNECTION CAPPILARY TUBE CONNECTION2 CAPPILARY TUBE CONNECTION1 T CONNECTION FOR SWITCH CAPILLARY BOLT M8x50 ROTOLOCK ADAPTOR1 CHECH VALVE COMPRESSOR ELECTRICAL BOX COMPRESSOR BOLT M8x25 WASHER 22x8,2x2,4 BOLT M6x30 FAN CONDANSER CABINET BASE MATERIAL NAME 1 1 1 1 4 26 14 14 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 2 1 2 2 8 3 1 4 1 8 2 4 6 1 1 2 1 1 1 2 2 2 1 1 1 1 1 2 1 1 1 6 1 1 1 2 1 2 1 1 4 1 1 1 1 13 23 30 2 1 1 QTY MK260E-FHL N/A MK150E-FIE-Y MK150E-FIE-X MK150E-RTA2 MK190E-CFS MK260E-NUT MK260E-STU MK260E-FAS MK260E-BVL MK150E-CAT MK260E-CAH MK150E-CRB MK150E-CRT MK150E-CLR MK150E-CUR MK150E-CFB MK150E-CBL MK150E-CAL3 MK150E-CAL2 MK150E-CAL1 MK150E-CAI MK150E-CUL MK170EWF MK190E-MNS MK150E-DRS MK260E-DFD MK190E-MEV MK260E-SVA MK260E-SVC MK260E-DBV MK260E-ELW2 MK260E-FNS MK260E-HPS MK260E-LPS MK260E-TRF MK260E-PHR MK260E-FHH MK190E-FCN-230 MK190E-CNT-230 N/A MK150E-ELP MK130E-DPI MK260E-RDC MK260E-PCP MK260E-HNG MK260E-DLK MK260E-CG16 MK260E-SCF MK150E-ELB MK150E-FIT6 MK260E-BVL MK170E-BLT815 MK170E-CNK2 MK170E-CPG2 MK260E-CPG1 MK170E-ORG MK170E-T1/4 MK170E-NIP1/4 MK260E-DRN MK150E-ELK-X MK150E-ELK-Y MK150E-CPP MK170E-ELW1 MK150E-CNK1 MK150E-FDC MK150E-DRI MK150E-EXP MK150E-SSD MK260E-RTA3 MK260E-RTA2 MK150E-EXC MK190E-NT10 MK170E-SPR MK260E-BLT830 MK150E-LIQ MK260E-CPT2 MK180E-BYP MK260E-CPT1 MK150E-STC MK260E-CTC2 MK260E-CTC1 MK260E-TSC MK260E-BLT850 MK260E-RTA1 MK170E-CHV MK140E-CEB MK140E-CMP MK150E-BLT825 MK260E-WHR22 MK260E-BLT630 MK140E-FMT MK140E-CON MK150E-CAB SPARE PART CODE REV PART LIST Page 81 77 89 76 1 75 Page 82 74 80 78 79 89 72 73 84 82 83 81 88 86 87 5 6 4 59 58 2 48 56 22 21 57 94 52 47 70 3 5 20 19 55 53 4 49 50 62 61 60 45 8 46 12 13 15 14 17 16 18 11 63 29 7 10 5 64 6 5 5 28 44 23 27 20 90 24 31 25 26 32 39 43 9 92 35 37 44 30 44 51 85 51 33 66 36 41 71 42 44 65 91 34 69 38 40 8.1 - ED & Spare Part List MKE 1800 8.1 - ED & Spare Part List MKE 1800 LOW VOLTAGE FUSE HOLDER 94 93 92 91 90 89 88 87 86 85 84 83 82 NA COMPRESSED AIR FILTER ELEMENT X COMPRESSED AIR FILTER ELEMENT X ROTOLOCK ADAPTOR2 REMOVABLE SHIELD CAGE NUTS CABINET STUD AND NUT CABINET FASTENER BALL VALVE CABINET TOP CABINET HANDLE CABINET REAR BOTTOM 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 CABINET REAR TOP CABINET LOWER RIGHT CABINET UPPER RIGHT CABINET FRONT BOTTOM CABINET BOTTOM LEFT CABINET LEG3 CABINET LEG2 CABINET LEG1 CABINET INSIDE CABINET UPPER LEFT ELBOW FITTINGS MAIN SWITCH DRAIN SLEEVE DRAIN FIXING DEVICE MEMBRAN VALVE SOLENOID VALVE SOLENOID VALVE COIL DRAIN BALL VALVE ELBOW2 FAN ON OFF SWITCH HIGH PRESSURE SWICH LOW PRESSURE SWICH 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 TRANSFORMERS PHASE PROTECTION RELAY HIGH VOLTAGE FUSE HOLDER FAN CONTACTOR CONTACTOR NA ELECTRICAL PANEL DIGITAL CONTROLLER REDUCTION 1 2 - 1 4 PLASTIC CONTROL PANEL HINGE DOOR LOCK CONDUIT FOR CONTROL PANEL SWITCH CONNECTION FITTING ELECTRICAL BOX 1 4 -6 FITTINGS BALL VALVE BOLT M8 15 CONNECTION CIT2 COUPLING CLAMP 2 COUPLING CLAMP 1 25ø1* 1 4 T CONNECTOR 1 4 NIPPLE DRAIN NUT COMPRESSED AIR FILTER ELEMENT KIT X COMPRESSED AIR FILTER ELEMENT KIT Y COUPLING PIPE ELBOW1 CONNECTION CIT1 CLAMP DRIER-DEHYDRATOR EXPANSION VALVE SENSOR ADAPTOR ROTOLOCK ADAPTOR3 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. DATE HEAT EXCHANGER NUT M10 SEPARATOR BOLT M8 30 LIQUID RECEIVER CUPPER T2 BY-PASS VALVE CUPPER T1 SETTING THE CONNECTION CAPPILARY TUBE CONNECTION2 CAPPILARY TUBE CONNECTION1 T CONNECTION FOR SWITCH CAPILLARY BOLT M8 50 ROTOLOCK ADAPTOR1 CHECH VALVE COMPRESSOR ELECTRICAL BOX COMPRESSOR BOLT M8 25 WASHER 22 8 2 2 4 BOLT M6 30 FAN CONDANSER CABINET BASE MATERIAL NAME 1 1 1 1 4 26 14 14 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 2 1 2 2 8 3 1 4 1 8 2 4 6 1 1 2 1 1 1 2 2 2 1 1 1 1 1 2 1 1 1 6 1 1 1 2 1 2 1 1 4 1 1 1 1 13 23 30 2 1 1 QTY MK260E-FHL NA MK150E-FIE-Y MK150E-FIE-X MK150E-RTA2 MK190E-CFS MK260E-NUT MK260E-STU MK260E-FAS MK260E-BVL MK150E-CAT MK260E-CAH MK150E-CRB MK150E-CRT MK150E-CLR MK150E-CUR MK150E-CFB MK150E-CBL MK150E-CAL3 MK150E-CAL2 MK150E-CAL1 MK150E-CAI MK150E-CUL MK170EWF MK190E-MNS MK150E-DRS MK260E-DFD MK190E-MEV MK260E-SVA MK260E-SVC MK260E-DBV MK260E-ELW2 MK260E-FNS MK260E-HPS MK260E-LPS MK260E-TRF MK260E-PHR MK260E-FHH MK190E-FCN-230 MK190E-CNT-230 NA MK150E-ELP MK130E-DPI MK260E-RDC MK260E-PCP MK260E-HNG MK260E-DLK MK260E-CG16 MK260E-SCF MK150E-ELB MK150E-FIT6 MK260E-BVL MK170E-BLT815 MK170E-CNK2 MK170E-CPG2 MK260E-CPG1 MK170E-ORG MK170E-T1 4 MK170E-NIP1 4 MK260E-DRN MK150E-ELK-X MK150E-ELK-Y MK150E-CPP MK170E-ELW1 MK150E-CNK1 MK150E-FDC MK150E-DRI MK150E-EXP MK150E-SSD MK260E-RTA3 MK260E-RTA2 MK150E-EXC MK190E-NT10 MK170E-SPR MK260E-BLT830 MK150E-LIQ MK260E-CPT2 MK180E-BYP MK260E-CPT1 MK150E-STC MK260E-CTC2 MK260E-CTC1 MK260E-TSC MK260E-BLT850 MK260E-RTA1 MK170E-CHV MK150E-CEB MK150E-CMP MK150E-BLT825 MK260E-WHR22 MK260E-BLT630 MK150E-FMT MK150E-CON MK150E-CAB SPARE PART CODE REV PART LIST SIGNATURE Page 83 Page 84 74 69 22 94 87 95 86 86 89 99 90 91 92 88 93 97 33 98 1 99 96 6 93 7 43 8 29 30 7 77 71 76 73 75 63 8 30 28 78 70 79 72 3 34 35 32 68 36 30 4 66 49 67 45 34 35 37 25 24 46 44 31 47 37 48 44 61 50 2 5 65 27 26 63 11 10 26 38 82 81 80 39 12 9 85 29 30 30 42 23 17 56 56 41 40 26 31 35 20 21 62 19 64 34 24 57 13 15 54 58 27 43 53 60 26 56 57 18 14 16 52 55 51 84 101 100 30 8.1 - ED & Spare Part List MKE 2500 8.1 - ED & Spare Part List MKE 2500 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. 2,/6(3$5$72525,1* OIL SEPARATOR ELEMENT REMOVABLE SHIELD CABINET TOP CABINET FASTENER CABINET SIDE BOTTOM2 CABINET FRONT BOTTOM CABINET FRONT TOP CABINET SIDE TOP CABINET SIDE BOTTOM1 CABINET HANDLE CABINET REAR BOTTOM CABINET INSIDE CABINET REAR TOP &$%,1(7/(* &$%,1(7/(* COMPRESSED AIR FILTER ELEMENT Y COMPRESSED AIR FILTER ELEMENT X FILTER AUTOMATIC DRAIN FAN ON OFF SWITCH +,*+35(6685(6:,TCH LOW PRESSURE SWITCH H,*+ V2/7$*( FUSE HOLDER PHASE PROTECTION RELAY TRANSFORMERS CONTACTOR FAN CONTACTOR DIGITAL CONTROLLER POWER CONNECTOR  25,),&(&833(53,3(),77,1* LOW V2/7$*( FUSE HOLDER ROTOLOCK ADAPTOR1 PLASTIC CONTROL PANEL ELECTRICAL PANEL +,1*( DOOR LOCK SWITCH&211(&7,21),77,1* ASTROFLEX CONDUIT FOR CONTROL PANEL MEMBRANE ELECTRICAL BOX SOLENOID VALVE COIL NA MEMBRAN VALVE REDUCTION 1 2 - 1 4 ),77,1*6 MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD DRAIN SLEEVE ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER CUPPER T CLAMP DEHYDRATOR FILTER DRIER EXPANSION VALVE DISTRIBUTOR ROTOLOCK ADAPTOR4 ROTOLOCK SERVICE VALVE OIL SEPARATOR NUT M10 SEPARATOR BY-PASS VALVE REINFORCEMENT SHEET METAL ROTOLOCK ADAPTOR2 LIQUID RECEIVER BOLT M8 50 WASHER 22 8 2 2 4 CABINET STUD AND NUT COMPRESSOR ELECTRICAL BOX ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER  25,),&(&833(53,3(),77,1* ROTOLOCK ADAPTOR2 COMPRESSOR DRAIN VALVE (/%2:),77,1*6 T CONNECTION BALL VALVE ELBOW MAIN SWITCH SOLENOID VALVE 1 4 NIPPLE CHECH VALVE COMPRESSED AIR FILTER ELEMENT KIT X COMPRESSED AIR FILTER ELEMENT KIT Y BOLT M8 15 CONNECTION KIT 2 25ø1* &283/,1*&/$03 CONNECTION KIT 1 COLLECTOR &283/,1*&/$03 HEAT (;&+$1*(5 BOLT M6 30 &$*(187 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN CONDENSER CABINET BASE MATERIAL NAME 1 1 4 1 14 1 1 1 2 1 6 1 1 1 1 3 1 1 2 1 1 1 4 1 1 1 2 1 3 1 1 1 1 1 3 3 3 1 8 1 1 1 1 2 4 2 1 1 1 1 2 2 1 1 1 1 2 3 1 1 1 1 1 2 1 10 10 14 1 3 15 2 1 3 6 1 1 2 1 1 2 1 1 1 8 2 MK170E-OSO MK170E-OSE MK190E-RMS MK170E-CAT MK260E-FAS MK170E-CSB2 MK170E-CFB MK170E-CFT MK170E-CST MK170E-CSB1 MK260E-CHN MK170E-CRB MK170E-CAI MK170E-CRT MK170E-CAL2 MK170E-CAL1 MK170E-FIE-Y MK170E-FIE-X MK260E-ODR MK260E-FNS MK260E-HPS MK260E-LPS MK260E-FHH MK260E-PPR MK260E-TRF MK260E-CNT-230 MK260E-FCT-230 MK130E-DPI MK190E-PWC MK260E-CPF-0 MK260E-FHL MK160E-RTA1 MK260E-PCP MK170E-ELP MK260E+1* MK260E-DLK MK260E-SCF MK210E-ASF MK260E-CCP MK260E-MMM MK170E-ELB MK260E-SVC NA MK190E-MEV MK260E-RDC MK260E-FTT MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK170E-DRS MK260E-RTA5 MK260E-CPT MK170E-CLP MK170E-DRI MK160E-EXP MK260E-DST MK260E-RTA4 MK260E-RSV MK190E-OSP MK170E-NUT10 MK170E-SPR MK180E-BYP MK170E-RSM MK170E-RTA2 MK170E-LIQ MK260E-BLT850 MK260E-WHR22 MK260E-STU MK160E-CEB MK260E-RTA2 MK260E-CPF MK160E-RTA2 MK160E-CMP MK260E-DBV MK260E-EWF MK260E-TCN MK260E-BVL MK170E-ELW MK190E-MNS MK190E-SLV-230 MK170E-NIP1 4 MK170E-CHV MK170E-ELK-X MK170E-ELK-Y MK170E-BLT815 MK170E-CNK2 4 4 2 2 MK170E25* 8 2 48 48 1 1 8 2 1 1 MK260E&3* QTY MK170E&3* MK170E-CNK1 MK170E-CLL MK170E-EXC MK260E-BLT630 MK260E-NUT MK260E-CRP MK260E-FPRT MK260E-BLT830 MK170E-FMT MK170E-CON MK170E-CAB SPARE PART CODE REV PART LIST Page 85 Page 86 74 69 22 94 87 95 86 86 89 99 90 91 92 88 93 97 33 98 1 99 96 6 93 7 43 8 29 30 7 77 71 76 73 75 63 8 30 28 78 70 79 72 3 34 35 32 68 36 30 4 66 49 67 45 34 35 37 25 24 46 44 31 47 37 48 44 61 50 2 5 65 27 26 63 11 10 26 38 82 81 80 39 12 9 85 29 30 30 42 23 17 56 56 41 40 26 31 35 20 21 62 19 64 34 24 57 13 15 54 58 27 43 53 60 26 56 57 18 14 16 52 55 51 84 101 100 30 8.1 - ED & Spare Part List MKE 2775 8.1 - ED & Spare Part List MKE 2775 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. 2,/6(3$5$72525,1* OIL SEPARATOR ELEMENT REMOVABLE SHIELD CABINET TOP CABINET FASTENER CABINET SIDE BOTTOM2 CABINET FRONT BOTTOM CABINET FRONT TOP CABINET SIDE TOP CABINET SIDE BOTTOM1 CABINET HANDLE CABINET REAR BOTTOM CABINET INSIDE CABINET REAR TOP &$%,1(7/(* &$%,1(7/(* COMPRESSED AIR FILTER ELEMENT Y COMPRESSED AIR FILTER ELEMENT X FILTER AUTOMATIC DRAIN FAN ON OFF SWITCH +,*+35(6685(6:,TCH LOW PRESSURE SWITCH H,*+ V2/7$*( FUSE HOLDER PHASE PROTECTION RELAY TRANSFORMERS CONTACTOR FAN CONTACTOR DIGITAL CONTROLLER POWER CONNECTOR  25,),&(&833(53,3(),77,1* LOW V2/7$*( FUSE HOLDER ROTOLOCK ADAPTOR1 PLASTIC CONTROL PANEL ELECTRICAL PANEL +,1*( DOOR LOCK SWITCH&211(&7,21),77,1* ASTROFLEX CONDUIT FOR CONTROL PANEL MEMBRANE ELECTRICAL BOX SOLENOID VALVE COIL NA MEMBRAN VALVE REDUCTION 1 2 - 1 4 ),77,1*6 MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD DRAIN SLEEVE ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER CUPPER T CLAMP DEHYDRATOR FILTER DRIER EXPANSION VALVE DISTRIBUTOR ROTOLOCK ADAPTOR4 ROTOLOCK SERVICE VALVE OIL SEPARATOR NUT M10 SEPARATOR BY-PASS VALVE REINFORCEMENT SHEET METAL ROTOLOCK ADAPTOR2 LIQUID RECEIVER BOLT M8 50 WASHER 22 8 2 2 4 CABINET STUD AND NUT COMPRESSOR ELECTRICAL BOX ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER  25,),&(&833(53,3(),77,1* ROTOLOCK ADAPTOR2 COMPRESSOR DRAIN VALVE (/%2:),77,1*6 T CONNECTION BALL VALVE ELBOW MAIN SWITCH SOLENOID VALVE 1 4 NIPPLE CHECH VALVE COMPRESSED AIR FILTER ELEMENT KIT X COMPRESSED AIR FILTER ELEMENT KIT Y BOLT M8 15 CONNECTION KIT 2 25ø1* &283/,1*&/$03 CONNECTION KIT 1 COLLECTOR &283/,1*&/$03 HEAT (;&+$1*(5 BOLT M6 30 &$*(187 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN CONDENSER CABINET BASE MATERIAL NAME 1 1 4 1 14 1 1 1 2 1 6 1 1 1 1 3 1 1 2 1 1 1 4 1 1 1 2 1 3 1 1 1 1 1 3 3 3 1 8 1 1 1 1 2 4 2 1 1 1 1 2 2 1 1 1 1 2 3 1 1 1 1 1 2 1 10 10 14 1 3 15 2 1 3 6 1 1 2 1 1 2 1 1 1 8 2 MK170E-OSO MK170E-OSE MK190E-RMS MK170E-CAT MK260E-FAS MK170E-CSB2 MK170E-CFB MK170E-CFT MK170E-CST MK170E-CSB1 MK260E-CHN MK170E-CRB MK170E-CAI MK170E-CRT MK170E-CAL2 MK170E-CAL1 MK170E-FIE-Y MK170E-FIE-X MK260E-ODR MK260E-FNS MK260E-HPS MK260E-LPS MK260E-FHH MK260E-PPR MK260E-TRF MK260E-CNT-230 MK260E-FCT-230 MK130E-DPI MK190E-PWC MK260E-CPF-0 MK260E-FHL MK190E-RTA1 MK260E-PCP MK170E-ELP MK260E+1* MK260E-DLK MK260E-SCF MK210E-ASF MK260E-CCP MK260E-MMM MK170E-ELB MK260E-SVC NA MK190E-MEV MK260E-RDC MK260E-FTT MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK170E-DRS MK260E-RTA5 MK260E-CPT MK170E-CLP MK170E-DRI MK190E-EXP MK260E-DST MK260E-RTA4 MK260E-RSV MK190E-OSP MK170E-NUT10 MK170E-SPR MK180E-BYP MK170E-RSM MK170E-RTA2 MK170E-LIQ MK260E-BLT850 MK260E-WHR22 MK260E-STU MK170E-CEB MK260E-RTA2 MK260E-CPF MK160E-RTA2 MK170E-CMP MK260E-DBV MK260E-EWF MK260E-TCN MK260E-BVL MK170E-ELW MK190E-MNS MK190E-SLV-230 MK170E-NIP1 4 MK170E-CHV MK170E-ELK-X MK170E-ELK-Y MK170E-BLT815 MK170E-CNK2 4 4 2 2 MK170E25* 8 2 48 48 1 1 8 2 1 1 MK260E&3* QTY MK170E&3* MK170E-CNK1 MK170E-CLL MK170E-EXC MK260E-BLT630 MK260E-NUT MK260E-CRP MK260E-FPRT MK260E-BLT830 MK170E-FMT MK170E-CON MK170E-CAB SPARE PART CODE REV PART LIST Page 87 Page 88 86 85 20 89 84 88 83 83 93 91 92 90 99 87 96 98 1 97 100 32 33 94 95 9 23 35 10 29 43 44 76 23 40 34 39 75 10 9 11 28 30 12 41 38 42 36 12 8 49 4 46 45 47 48 50 51 6 37 24 52 2 7 25 80 74 79 77 78 26 13 81 38 22 82 59 21 19 27 64 15 67 68 63 14 17 72 58 62 27 60 57 61 66 27 56 11 55 59 73 54 53 65 18 16 70 71 69 8.1 - ED & Spare Part List MKE 3330 8.1 - ED & Spare Part List MKE 3330 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. REMOVABLE SHIELD CABINET FASTENER CABINET TOP CABINET POST SECONDARY SIDE CABINET REAR SIDE BOTTOM CABINET HANDLE CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM CABINET STUD AND NUT DIGITAL CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 HIGH VOLTAGE FUSE HOLDER PHASE PROTECTION RELAY TRANSFORMERS CONTACTOR FAN CONTACTOR POWER CONNECTOR 1 4 90 ORIFICE CUPPER PIPE FITTING ROTOLOCK ADAPTOR1 LOW VOLTAGE FUSE HOLDER SOLENOID VALVE COIL MEMBRANE FAN ON OFF SWITCH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING DRAIN SLEEVE ELECTRICAL PANEL ELECTRICAL BOX T12 )/$7)ø77ø1*6 T14 DRAIN BALL VALVE MEMBRAN VALVE SOLENOID VALVE ELBOW FITTINGS2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD PLASTIC PIPE CLAMP PIPING CONNECTION SHEET BY-PASS VALVE DISTRIBUTOR DISTRIBUTOR CLAMP EXPANSION VALVE CLAMP DEHYDRATOR FILTER DRIER 1 4 CUPPER PIPE FITTING ROTOLOCK SERVICE VALVE ASTROFLEX SIGHT GLASS2 4 14 1 2 1 10 1 1 1 2 4 1 1 1 1 1 1 3 4 1 1 1 1 3 1 1 1 1 1 1 1 1 3 3 3 1 1 1 1 1 1 3 1 1 1 3 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 OIL SEPARATOR 8 CAPPILARY TUBE CONNECTION1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 1 OIL SEPARATOR ORING 1 LIQUID RECEIVER 1 SEPERATOR 1 SIGHT GLASS1 1 BOLT M8 50 10 10 WASHER 22 8 2 2 4 NA COMPRESSOR ELECTRICAL BOX 1 COMPRESSOR 1 3 1 4 90 ORIFICE CUPPER PIPE FITTING ELBOW FITTINGS1 4 ROTOLOCK ADAPTOR4 2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2 OIL SEPARATOR ELEMENT 1 ROTOLOCK ADAPTOR2 2 COUPLING CLAMP 4 2 BALL VALVE G 1 4 1 MAIN SWITCH 1 COUPLING CLAMP 3 4 SENSOR CONNECTION FITTING 1 COUPLING CLAMP 2 2 COLLECTOR BOTTOM 1 COLLECTOR TOP 1 COUPLING CLAMP 1 HEAT EXCHANGER ROTOLOCK ADAPTOR2 CONDUIT FOR CONTROL PANEL BOLT M6 30 CAGE NUTS CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 NA FAN NA CONDANSER CABINET BASE MATERIAL NAME MK190E-RMS MK260E-FAS MK190E-CAT MK190E-CPS MK190E-CRS MK260E-CHN MK190E-CSB2 MK190E-CSB1 MK190E-CRT MK190E-CSB MK190E-CST MK190E-CFT MK190E-CFB MK260E-STU MK130E-DPI MK260E-PCP MK190E-CAL2 MK190E-CAL1 MK260E-FHH MK260E-PPR MK260E-TRF MK260E-CNT-230 MK260E-FCN-230 MK190E-PWC MK260E-CPF-O MK210E-RTA1 MK260E-FHL MK260E-SVC MK260E-MMM MK260E-FNS MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-DRS MK190E-ELP MK190E-ELB MK260E-T12 MK260E-FTS MK260E-T14 MK260E-DBV MK190E-MMV MK190E-SLV-230 MK260E-EWF2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK260E-PPC MK190E-PCS MK180E-BYP MK260E-DST MK260E-DSTK MK190E-EXP MK190E-CLP MK190E-DRI MK260E-CPF MK260E-RSV MK190E-ASF MK190E-SGL2 MK190E-OSP MK260E-CTC1 MK260E-RTA5 MK190E-OSO MK190E-RCV MK190E-SPR MK190E-SGL1 MK260E-BLT850 MK260E-WHR22 NA MK190E-CEB MK190E-CMP MK260E-CPF MK260E-EWF1 MK260E-RTA4 MK260E-RTA2 MK190E-OSE MK160E-RTA2 MK210E-CPG4 MK260E-BVL MK190E-MNS MK210E-CPG3 MK260E-SCF MK210E-CPG2 MK190E-CLLB MK190E-CLLT 4 2 2 8 MK260E-CPG1 58 58 1 1 8 2 1 1 MK260E-BLT630 QTY MK260E-EXC MK150E-RTA2 MK260E-CCP MK260E-NUT MK190E-CRP MK190E-FPRT MK260E-BLT830 NA MK190E-FMT NA MK190E-CON MK190E-CAB SPARE PART CODE REV PART LIST DATE Page 89 Page 90 86 85 20 89 84 88 83 83 93 91 92 90 99 87 96 98 1 97 100 32 33 94 95 9 23 35 10 29 43 44 76 23 40 34 39 75 10 9 11 28 30 12 41 38 42 36 12 8 49 4 46 45 47 48 50 51 6 37 24 52 2 7 25 80 74 79 77 78 26 13 81 38 22 82 59 21 19 27 64 15 67 68 63 14 17 60 72 58 62 27 57 61 66 27 56 11 55 59 73 54 53 65 18 16 70 71 69 8.1 - ED & Spare Part List MKE 3915 8.1 - ED & Spare Part List MKE 3915 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. REMOVABLE SHIELD CABINET FASTENER CABINET TOP CABINET POST SECONDARY SIDE CABINET REAR SIDE BOTTOM CABINET HANDLE CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM CABINET STUD AND NUT DIGITAL CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 HIGH VOLTAGE FUSE HOLDER PHASE PROTECTION RELAY TRANSFORMERS CONTACTOR FAN CONTACTOR POWER CONNECTOR 1 4 90 ORIFICE CUPPER PIPE FITTING ROTOLOCK ADAPTOR1 LOW VOLTAGE FUSE HOLDER SOLENOID VALVE COIL MEMBRANE FAN ON OFF SWITCH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING DRAIN SLEEVE ELECTRICAL PANEL ELECTRICAL BOX T12 )/$7)ø77ø1*6 T14 DRAIN BALL VALVE MEMBRAN VALVE SOLENOID VALVE ELBOW FITTINGS2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD PLASTIC PIPE CLAMP PIPING CONNECTION SHEET BY-PASS VALVE DISTRIBUTOR DISTRIBUTOR CLAMP EXPANSION VALVE CLAMP DEHYDRATOR FILTER DRIER 1 4 CUPPER PIPE FITTING ROTOLOCK SERVICE VALVE ASTROFLEX SIGHT GLASS2 4 14 1 2 1 10 1 1 1 2 4 1 1 1 1 1 1 3 4 1 1 1 1 3 1 1 1 1 1 1 1 1 3 3 3 1 1 1 1 1 1 3 1 1 1 3 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 OIL SEPARATOR 8 CAPPILARY TUBE CONNECTION1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 1 OIL SEPARATOR ORING 1 LIQUID RECEIVER 1 SEPERATOR 1 SIGHT GLASS1 1 BOLT M8 50 10 10 WASHER 22 8 2 2 4 NA COMPRESSOR ELECTRICAL BOX 1 COMPRESSOR 1 3 1 4 90 ORIFICE CUPPER PIPE FITTING ELBOW FITTINGS1 4 ROTOLOCK ADAPTOR4 2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2 OIL SEPARATOR ELEMENT 1 ROTOLOCK ADAPTOR2 2 COUPLING CLAMP 4 2 BALL VALVE G 1 4 1 MAIN SWITCH 1 COUPLING CLAMP 3 4 SENSOR CONNECTION FITTING 1 COUPLING CLAMP 2 2 COLLECTOR BOTTOM 1 COLLECTOR TOP 1 COUPLING CLAMP 1 HEAT EXCHANGER ROTOLOCK ADAPTOR2 CONDUIT FOR CONTROL PANEL BOLT M6 30 CAGE NUTS CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 NA FAN NA CONDANSER CABINET BASE MATERIAL NAME MK190E-RMS MK260E-FAS MK190E-CAT MK190E-CPS MK190E-CRS MK260E-CHN MK190E-CSB2 MK190E-CSB1 MK190E-CRT MK190E-CSB MK190E-CST MK190E-CFT MK190E-CFB MK260E-STU MK130E-DPI MK260E-PCP MK190E-CAL2 MK190E-CAL1 MK260E-FHH MK260E-PPR MK260E-TRF MK260E-CNT-230 MK260E-FCN-230 MK190E-PWC MK260E-CPF-O MK210E-RTA1 MK260E-FHL MK260E-SVC MK260E-MMM MK260E-FNS MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-DRS MK190E-ELP MK190E-ELB MK260E-T12 MK260E-FTS MK260E-T14 MK260E-DBV MK190E-MMV MK190E-SLV-230 MK260E-EWF2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK260E-PPC MK190E-PCS MK180E-BYP MK260E-DST MK260E-DSTK MK190E-EXP MK190E-CLP MK190E-DRI MK260E-CPF MK260E-RSV MK190E-ASF MK190E-SGL2 MK190E-OSP MK260E-CTC1 MK260E-RTA5 MK190E-OSO MK190E-RCV MK190E-SPR MK190E-SGL1 MK260E-BLT850 MK260E-WHR22 NA MK190E-CEB MK190E-CMP MK260E-CPF MK260E-EWF1 MK260E-RTA4 MK260E-RTA2 MK190E-OSE MK160E-RTA2 MK210E-CPG4 MK260E-BVL MK190E-MNS MK210E-CPG3 MK260E-SCF MK210E-CPG2 MK190E-CLLB MK190E-CLLT 4 2 2 8 MK260E-CPG1 58 58 1 1 8 2 1 1 MK260E-BLT630 QTY MK260E-EXC MK150E-RTA2 MK260E-CCP MK260E-NUT MK190E-CRP MK190E-FPRT MK260E-BLT830 NA MK190E-FMT NA MK190E-CON MK190E-CAB SPARE PART CODE REV PART LIST DATE Page 91 Page 92 78 83 84 82 80 81 79 89 78 86 85 94 88 87 93 1 92 90 91 9 10 32 33 72 39 29 35 75 69 68 73 34 71 77 76 74 70 67 30 31 10 9 11 38 43 3 41 42 36 37 26 25 23 5 62 40 4 63 6 24 8 13 60 11 59 28 56 61 56 58 2 12 7 21 44 27 66 65 64 56 57 15 48 52 49 51 20 19 46 45 47 50 53 55 17 22 54 18 16 14 8.1 - ED & Spare Part List MKE 5085 8.1 - ED & Spare Part List MKE 5085 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. CABINET FASTENER CABINET TOP CABINET POST SECONDARY SIDE CABINET HANDLE CABINET REAR SIDE BOTTOM CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM MAIN SWITCH ESD3 CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 FUSE PHASE PROTECTION RELAY MOTOR THERMAL HEAT EXCHANGER CONTACTOR FAN CONTACTOR 7+(50ø1$/%/2&. THERMINAL BLOCK PROTECTION 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. CONTROLLER FAN SWICH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING CABLE GLAND PG11 CABLE GLAND PG7 ELECTRICAL BOX BY PASS VALVE BY PASS SERVICE VALVE )/$7)ø77ø1*6 SENSOR HOLDER MANSON 1 2 ELBOW FITTINGS2 T14 MANUAL VALVE MEMBRAN VALVE MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD ELECTRONIC DISCHARGE BALL VALVE DISTRIBUTOR CLAMP DISTRIBUTOR EXPANSION VALVE1 OIL SEPARATOR ROTOLOCK ADAPTOR5 ROTOLOCK ADAPTOR4 LIQUID RECEIVER LIQUID ACCUMULATOR SIGHT GLASS1 BOLT M8 50 WASHER 22 8 2 2 4 OVERLOAD PROTECTOR COMPRESSOR ELECTRICAL BOX COMPRESSOR DRAIN VALVE1 ELBOW FITTINGS1 ROTOLOCK ADAPTOR3 ROTOLOCK ADAPTOR2 CUPPER T ROTOLOCK ADAPTOR1 COUPLING CLAMP 4 DEWPOINT SERVICE VALVE PLUG G 1 4 COUPLING CLAMP 3 COLLECTOR MANSON COUPLING CLAMP 2 COLLECTOR BOTTOM COLLECTOR TOP COUPLING CLAMP 1 HEAT EXCHANGER CABLE PLUG PG16 CABLE GLAND PG16 BOLT M6 30 CAGE NUT M6 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN BLADE FAN FAN GRILL CONDANSER CABINET BASE MATERIAL NAME 14 1 2 10 2 1 1 1 1 4 1 1 1 1 1 1 3 4 1 1 1 2 4 3 9 1 24 1 1 1 1 3 3 3 2 8 1 1 3 1 1 2 4 1 2 2 1 3 1 1 1 2 1 1 1 1 1 2 1 1 1 10 10 1 1 1 3 6 2 2 3 3 2 1 1 6 4 2 1 1 MK260E-CFS MK190E-CAT MK210E-CPS MK260E-CAH MK210E-CRS MK210E-CSB2 MK210E-CSB1 MK210E-CRT MK210E-CSB MK210E-CST MK210E-CFT MK210E-CFB MK260E-MSW MK260E-ES3 MK260E-PCP MK210E-CAL2 MK210E-CAL1 MK260E-FUS MK260E-PHR MK260E-MTRL MK260E-EXCN MK260E-FCT MK260E-TRM4 MK260E-TBP MK260E-TRM3 MK260E-TRM2 MK260E-TRM1 MK260E-CTR MK260E-FSW MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-CG11 MK260E-CG7 MK210E-ELB MK260E-SVA MK260E-BSRV MK260E-FTS MK260E-SRH MK260E-MNS MK260E-EWF2 MK260E-T14 MK260E-MVL MK260E-MEV MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK260E-CTC2 MK260E-RSV MK260E-DSTK MK260E-DST MK210E-EXP2 MK210E-OSE MK260E-RTA5 MK260E-RTA4 MK210E-LIQ MK210E-LIQA MK210E-SGL1 MK260E-BLT850 MK260E-WHR22 MK210E-OVP MK210E-CEB MK210E-CMP MK260E-DRA1 MK260E-EWF1 MK260E-RTA3 MK260E-RTA2 MK260E-CPT MK260E-RTA1 MK210E-CPG4 MK260E-TMPS MK260E-PLG MK210E-CPG3 MK260E-CLLM MK210E-CPG2 MK210E-CLLB MK210E-CLLT MK260E-CPG1 MK260E-EXC 6 3 2 5 MK260E-CG16 58 MK260E-BLT630 58 1 1 8 1 2 2 1 1 MK260E-CGN6 QTY MK260E-CP16 MK260E-CRP MK260E-FPRT MK260E-CRP MK210E-FBL MK210E-FAN MK210E-FGR MK210E-CON MK210E-CAB SPARE PART CODE REV PART LIST DATE Page 93 Page 94 78 83 84 81 82 80 79 89 78 86 85 94 88 87 93 1 92 90 91 9 10 32 33 72 39 29 35 75 69 68 73 34 71 77 76 74 70 67 30 31 10 9 11 38 43 3 41 42 26 25 62 36 37 23 5 40 4 63 6 24 8 7 13 60 11 59 28 56 61 56 58 2 12 21 44 27 66 65 64 56 57 15 48 52 49 51 20 19 46 45 47 50 53 55 17 22 54 18 16 14 8.1 - ED & Spare Part List MKE 5850 8.1 - ED & Spare Part List MKE 5850 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 ITEM NO. CABINET FASTENER CABINET TOP CABINET POST SECONDARY SIDE CABINET HANDLE CABINET REAR SIDE BOTTOM CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM MAIN SWITCH ESD3 CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 FUSE PHASE PROTECTION RELAY MOTOR THERMAL HEAT EXCHANGER CONTACTOR FAN CONTACTOR 7+(50ø1$/%/2&. THERMINAL BLOCK PROTECTION 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. CONTROLLER FAN SWICH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING CABLE GLAND PG11 CABLE GLAND PG7 ELECTRICAL BOX BY PASS VALVE BY PASS SERVICE VALVE )/$7)ø77ø1*6 SENSOR HOLDER MANSON 1 2 ELBOW FITTINGS2 T14 MANUAL VALVE MEMBRAN VALVE MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD ELECTRONIC DISCHARGE BALL VALVE DISTRIBUTOR CLAMP DISTRIBUTOR EXPANSION VALVE1 OIL SEPARATOR ROTOLOCK ADAPTOR5 ROTOLOCK ADAPTOR4 LIQUID RECEIVER LIQUID ACCUMULATOR SIGHT GLASS1 BOLT M8 50 WASHER 22 8 2 2 4 OVERLOAD PROTECTOR COMPRESSOR ELECTRICAL BOX COMPRESSOR DRAIN VALVE1 ELBOW FITTINGS1 ROTOLOCK ADAPTOR3 ROTOLOCK ADAPTOR2 CUPPER T ROTOLOCK ADAPTOR1 COUPLING CLAMP 4 DEWPOINT SERVICE VALVE PLUG G 1 4 COUPLING CLAMP 3 COLLECTOR MANSON COUPLING CLAMP 2 COLLECTOR BOTTOM COLLECTOR TOP COUPLING CLAMP 1 HEAT EXCHANGER CABLE PLUG PG16 CABLE GLAND PG16 BOLT M6 30 CAGE NUT M6 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN BLADE FAN FAN GRILL CONDANSER CABINET BASE MATERIAL NAME 14 1 2 10 2 1 1 1 1 4 1 1 1 1 1 1 3 4 1 1 1 2 4 3 9 1 24 1 1 1 1 3 3 3 2 8 1 1 3 1 1 2 4 1 2 2 1 3 1 1 1 2 1 1 1 1 1 2 1 1 1 10 10 1 1 1 3 6 2 2 3 3 2 1 1 6 4 2 1 1 6 3 2 5 58 58 1 1 8 1 2 2 1 1 QTY MK260E-CFS MK190E-CAT MK210E-CPS MK260E-CAH MK210E-CRS MK210E-CSB2 MK210E-CSB1 MK210E-CRT MK210E-CSB MK210E-CST MK210E-CFT MK210E-CFB MK260E-MSW MK260E-ES3 MK260E-PCP MK210E-CAL2 MK210E-CAL1 MK260E-FUS MK260E-PHR MK260E-MTRL MK260E-EXCN MK260E-FCT MK260E-TRM4 MK260E-TBP MK260E-TRM3 MK260E-TRM2 MK260E-TRM1 MK260E-CTR MK260E-FSW MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-CG11 MK260E-CG7 MK210E-ELB MK260E-SVA MK260E-BSRV MK260E-FTS MK260E-SRH MK260E-MNS MK260E-EWF2 MK260E-T14 MK260E-MVL MK260E-MEV MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK260E-CTC2 MK260E-RSV MK260E-DSTK MK260E-DST MK210E-EXP2 MK210E-OSE MK260E-RTA5 MK260E-RTA4 MK210E-LIQ MK210E-LIQA MK210E-SGL1 MK260E-BLT850 MK260E-WHR22 MK210E-OVP MK210E-CEB MK210E-CMP MK260E-DRA1 MK260E-EWF1 MK260E-RTA3 MK260E-RTA2 MK260E-CPT MK260E-RTA1 MK210E-CPG4 MK260E-TMPS MK260E-PLG MK210E-CPG3 MK260E-CLLM MK210E-CPG2 MK210E-CLLB MK210E-CLLT MK260E-CPG1 MK260E-EXC MK260E-CP16 MK260E-CG16 MK260E-BLT630 MK260E-CGN6 MK260E-CRP MK260E-FPRT MK260E-CRP MK210E-FBL MK210E-FAN MK210E-FGR MK210E-CON MK210E-CAB SPARE PART CODE REV PART LIST DATE Page 95 Page 96 84 89 90 88 86 87 85 95 84 100 94 92 93 91 99 1 40 44 98 43 96 97 47 75 45 78 72 71 42 37 38 48 46 9 10 76 80 79 77 73 70 34 23 25 26 74 41 11 9 29 27 10 39 36 35 24 28 83 31 30 65 49 3 66 81 82 13 62 4 33 63 64 5 6 21 69 68 67 32 60 60 8 2 12 7 61 60 53 54 57 56 19 32 59 15 18 51 22 52 16 50 55 17 20 58 14 8.1 - ED & Spare Part List MKE 6975 8.1 - ED & Spare Part List MKE 6975 CABINET FASTENER CABINET TOP1 CABINET POST SECONDARY SIDE CABINET HANDLE 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 CABINET REAR SIDE BOTTOM CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET REAR SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM MAIN SWITCH ESD3 CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 CUPPER CLAMP2 CAPPILARY TUBE CONNECTION ROTOLOCK SERVICE VALVE FUSE PHASE PROTECTION RELAY 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 MOTOR THERMAL HEAT EXCHANGER CONTACTOR FAN CONTACTOR 7+(50ø1$/%/2&. THERMINAL BLOCK PROTECTION 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. CONTROLLER FAN SWICH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING CABLE GLAND PG7 ELECTRICAL BOX BY PASS VALVE BY PASS SERVICE VALVE )/$7)ø77ø1*6 SENSOR HOLDER MANSON 1 2 T14 MANUAL VALVE MEMBRAN VALVE MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD ELECTRONIC DISCHARGE DISTRIBUTOR CLAMP DISTRIBUTOR EXPANSION VALVE1 FILTER DRYER OIL SEPARATOR ROTOLOCK ADAPTOR5 ROTOLOCK ADAPTOR4 LIQUID RECEIVER LIQUID ACCUMULATOR SIGHT GLASS1 BOLT M8 50 WASHER 22 8 2 2 4 OVERLOAD PROTECTOR COMPRESSOR ELECTRICAL BOX COMPRESSOR DRAIN VALVE1 ELBOW FITTINGS1 CUPPER CLAMP1 SETTING VALVE T CUPPER T2 CUPPER ELBOW ROTOLOCK ADAPTOR4 ROTOLOCK ADAPTOR3 ROTOLOCK ADAPTOR2 25 24 23 22 21 CUPPER T1 ROTOLOCK ADAPTOR1 COUPLING CLAMP 4 DEWPOINT SERVICE VALVE COUPLING CLAMP 3 20 19 18 17 PLUG G 1 4 COUPLING CLAMP 2 COLLECTOR MANSON COLLECTOR BOTTOM COLLECTOR TOP 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 COUPLING CLAMP 1 HEAT EXCHANGER CABLE PLUG PG16 CABLE GLAND PG16 BOLT M6 30 CAGE NUT M6 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN BLADE FAN FAN GRILL CONDANSER CABINET BASE ITEM NO. MATERIAL NAME 28 2 4 14 3 1 1 1 2 6 1 1 1 1 1 1 3 2 9 1 MK260E-CFS 4 1 2 1 2 4 3 9 1 24 1 1 1 1 3 3 3 MK260E-FUS MK260E-PHR 6 1 1 3 4 1 5 1 3 3 1 3 1 1 1 1 1 1 1 1 2 2 1 1 2 12 12 1 1 1 4 8 1 1 2 9 2 4 2 3 4 2 1 2 1 8 4 1 1 8 4 2 5 60 60 1 1 8 2 2 2 1 1 QTY MK220E-CAT1 MK230E-CPS MK260E-CAH MK230E-CRS MK230E-CSB2 MK230E-CSB1 MK230E-CRT MK230E-CRS MK230E-CST MK230E-CFT MK230E-CFB MK260E-MSW MK260E-ES3 MK260E-PCP MK230E-CAL2 MK230E-CAL1 MK260E-CCP2 MK260E-RSV MK260E-RSV MK260E-MTRL MK260E-EXCN MK260E-FCT MK260E-TRM4 MK260E-TBP MK260E-TRM3 MK260E-TRM2 MK260E-TRM1 MK260E-CTR MK260E-FSW MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-CG7 MK250E-ELB MK260E-SVA MK260E-BSRV MK260E-FTS MK260E-SRH MK260E-MNS MK260E-T14 MK260E-MVL MK260E-MEV MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK230E-DRM MK260E-CTC2 MK260E-DSTK MK220E-DST MK230E-EXP2 MK230E-FTD MK230E-OSE MK260E-RTA5 MK260E-RTA4 MK230E-LIQ MK230E-LIQA MK230E-SGL1 MK260E-BLT850 MK260E-WHR22 MK230E-OVP MK230E-CEB MK230E-CMP MK260E-DRA1 MK260E-EWF1 MK260E-CCP1 MK260E-SVT MK260E-CPT2 MK260E-CPE MK260E-RTA4 MK260E-RTA3 MK260E-RTA2 MK260E-CPT1 MK260E-RTA1 MK250E-CPG4 MK260E-TMPS MK250E-CPG3 MK260E-PLG MK250E-CPG2 MK260E-CLLM MK250E-CLLB MK250E-CLLT MK260E-CPG1 MK260E-EXC MK260E-CP16 MK260E-CG16 MK260E-BLT630 MK260E-CGN6 MK220E-CRP MK220E-FPRT MK260E-CRP MK220E-FBL MK220E-FAN MK220E-FGR MK220E-CON MK230E-CAB SPARE PART CODE REV PART LIST DATE Page 97 Page 98 84 89 90 88 86 87 85 95 84 101 94 92 93 91 100 99 1 40 44 98 43 96 97 47 75 45 78 72 71 42 37 38 48 46 9 10 76 80 79 77 73 70 34 26 25 23 74 41 11 29 27 10 9 39 36 35 24 28 83 31 30 65 49 3 66 81 82 13 62 5 6 33 63 64 4 21 69 68 67 32 60 60 8 2 12 7 61 60 53 54 57 56 19 32 59 15 18 51 22 52 16 50 55 17 20 58 14 8.1 - ED & Spare Part List MKE 7875 8.1 - ED & Spare Part List MKE 7875 CABINET FASTENER CABINET TOP2 CABINET TOP1 CABINET POST SECONDARY SIDE CABINET HANDLE 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 CABINET REAR SIDE BOTTOM CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET REAR SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM MAIN SWITCH ESD3 CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 CUPPER CLAMP2 CAPPILARY TUBE CONNECTION ROTOLOCK SERVICE VALVE FUSE PHASE PROTECTION RELAY MOTOR THERMAL HEAT EXCHANGER CONTACTOR FAN CONTACTOR 7+(50ø1$/%/2&. THERMINAL BLOCK PROTECTION 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. CONTROLLER FAN SWICH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING CABLE GLAND PG7 ELECTRICAL BOX BY PASS VALVE BY PASS SERVICE VALVE )/$7)ø77ø1*6 SENSOR HOLDER MANSON 1 2 T14 MANUAL VALVE MEMBRAN VALVE MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD ELECTRONIC DISCHARGE DISTRIBUTOR CLAMP DISTRIBUTOR EXPANSION VALVE1 FILTER DRYER OIL SEPARATOR ROTOLOCK ADAPTOR5 ROTOLOCK ADAPTOR4 LIQUID RECEIVER LIQUID ACCUMULATOR SIGHT GLASS1 BOLT M8 50 WASHER 22 8 2 2 4 OVERLOAD PROTECTOR COMPRESSOR ELECTRICAL BOX COMPRESSOR DRAIN VALVE1 ELBOW FITTINGS1 CUPPER CLAMP1 SETTING VALVE T CUPPER T2 CUPPER ELBOW ROTOLOCK ADAPTOR4 ROTOLOCK ADAPTOR3 ROTOLOCK ADAPTOR2 25 24 23 22 21 CUPPER T1 ROTOLOCK ADAPTOR1 COUPLING CLAMP 4 DEWPOINT SERVICE VALVE COUPLING CLAMP 3 20 19 18 17 PLUG G 1 4 COUPLING CLAMP 2 COLLECTOR MANSON COLLECTOR BOTTOM COLLECTOR TOP 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 COUPLING CLAMP 1 HEAT EXCHANGER CABLE PLUG PG16 CABLE GLAND PG16 BOLT M6 30 CAGE NUT M6 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN BLADE FAN FAN GRILL CONDANSER CABINET BASE ITEM NO. MATERIAL NAME 32 1 2 4 14 3 1 1 1 2 6 1 1 1 1 1 1 3 2 9 1 MK260E-CFS 4 1 2 1 2 4 3 9 1 24 1 1 1 1 3 3 3 MK260E-FUS MK260E-PHR 6 1 1 3 4 1 5 1 3 3 1 3 1 1 1 1 1 1 1 1 2 2 1 1 2 12 12 1 1 1 4 8 1 1 2 9 2 4 2 3 4 2 1 2 1 8 4 1 1 8 4 3 6 60 60 1 1 12 3 3 3 1 1 QTY MK230E-CAT2 MK230E-CAT1 MK230E-CPS MK260E-CAH MK230E-CRS MK230E-CSB2 MK230E-CSB1 MK230E-CRT MK230E-CRS MK230E-CST MK230E-CFT MK230E-CFB MK260E-MSW MK260E-ES3 MK260E-PCP MK230E-CAL2 MK230E-CAL1 MK260E-CCP2 MK260E-RSV MK260E-RSV MK260E-MTRL MK260E-EXCN MK260E-FCT MK260E-TRM4 MK260E-TBP MK260E-TRM3 MK260E-TRM2 MK260E-TRM1 MK260E-CTR MK260E-FSW MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-CG7 MK250E-ELB MK260E-SVA MK260E-BSRV MK260E-FTS MK260E-SRH MK260E-MNS MK260E-T14 MK260E-MVL MK260E-MEV MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK230E-DRM MK260E-CTC2 MK260E-DSTK MK230E-DST MK230E-EXP2 MK230E-FTD MK230E-OSE MK260E-RTA5 MK260E-RTA4 MK230E-LIQ MK230E-LIQA MK230E-SGL1 MK260E-BLT850 MK260E-WHR22 MK230E-OVP MK230E-CEB MK230E-CMP MK260E-DRA1 MK260E-EWF1 MK260E-CCP1 MK260E-SVT MK260E-CPT2 MK260E-CPE MK260E-RTA4 MK260E-RTA3 MK260E-RTA2 MK260E-CPT1 MK260E-RTA1 MK250E-CPG4 MK260E-TMPS MK250E-CPG3 MK260E-PLG MK250E-CPG2 MK260E-CLLM MK250E-CLLB MK250E-CLLT MK260E-CPG1 MK260E-EXC MK260E-CP16 MK260E-CG16 MK260E-BLT630 MK260E-CGN6 MK230E-CRP MK230E-FPRT MK260E-CRP MK230E-FBL MK230E-FAN MK230E-FGR MK230E-CON MK230E-CAB SPARE PART CODE REV PART LIST DATE Page 99 Page 100 79 84 85 83 81 82 80 90 79 96 87 86 89 88 95 36 1 33 34 94 30 93 69 76 70 31 73 35 32 42 44 43 74 78 77 75 71 68 72 41 91 92 9 40 10 26 25 23 27 11 39 63 38 10 9 24 64 37 59 61 11 60 62 13 3 67 66 65 29 21 4 49 28 57 53 58 45 52 57 50 54 57 5 6 8 7 2 47 15 12 46 48 51 56 19 22 18 17 16 20 55 14 8.1 - ED & Spare Part List MKE 9000 8.1 - ED & Spare Part List MKE 9000 CABINET FASTENER CABINET TOP2 CABINET TOP1 CABINET POST SECONDARY SIDE CABINET HANDLE 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 CABINET REAR SIDE BOTTOM CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET REAR SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM MAIN SWITCH ESD3 CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 FUSE PHASE PROTECTION RELAY 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 MOTOR THERMAL HEAT EXCHANGER CONTACTOR FAN CONTACTOR 7+(50ø1$/%/2&. THERMINAL BLOCK PROTECTION 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. CONTROLLER FAN SWICH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING CABLE GLAND PG11 CABLE GLAND PG7 ELECTRICAL BOX BY PASS VALVE BY PASS SERVICE VALVE )/$7)ø77ø1*6 SENSOR HOLDER MANSON 1 2 ELBOW FITTINGS2 T14 MANUAL VALVE MEMBRAN VALVE MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD ELECTRONIC DISCHARGE DISTRIBUTOR CLAMP DISTRIBUTOR EXPANSION VALVE1 FILTER DRYER OIL SEPARATOR ROTOLOCK ADAPTOR5 ROTOLOCK ADAPTOR4 LIQUID RECEIVER LIQUID ACCUMULATOR SIGHT GLASS1 BOLT M8 50 WASHER 22 8 2 2 4 OVERLOAD PROTECTOR COMPRESSOR ELECTRICAL BOX COMPRESSOR DRAIN VALVE1 ELBOW FITTINGS1 ROTOLOCK ADAPTOR4 ROTOLOCK ADAPTOR3 ROTOLOCK ADAPTOR2 25 24 23 22 21 CUPPER T ROTOLOCK ADAPTOR1 COUPLING CLAMP 4 DEWPOINT SERVICE VALVE COUPLING CLAMP 3 20 19 18 17 PLUG G 1 4 COUPLING CLAMP 2 COLLECTOR MANSON COLLECTOR BOTTOM COLLECTOR TOP 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 COUPLING CLAMP 1 HEAT EXCHANGER CABLE PLUG PG16 CABLE GLAND PG16 BOLT M6 30 CAGE NUT M6 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN BLADE FAN FAN GRILL CONDANSER CABINET BASE ITEM NO. MATERIAL NAME 28 1 2 2 12 2 1 1 1 1 4 1 1 1 1 1 1 3 4 1 2 1 2 4 3 9 1 24 1 1 1 1 3 3 3 2 8 1 1 3 1 1 5 6 3 4 4 1 5 2 2 1 1 1 1 1 1 2 2 1 1 2 14 14 2 2 2 6 6 3 5 2 4 5 2 1 2 1 10 4 1 1 10 5 2 5 58 58 2 1 12 3 3 3 1 1 QTY MK260E-CFS MK260E-CAT2 MK250E-CAT1 MK250E-CPS MK260E-CAH MK250E-CRS MK250E-CSB2 MK250E-CSB1 MK250E-CRT MK250E-CRS MK250E-CST MK250E-CFT MK250E-CFB MK260E-MSW MK260E-ES3 MK260E-PCP MK250E-CAL2 MK250E-CAL1 MK260E-FUS MK260E-PHR MK260E-MTRL MK260E-EXCN MK260E-FCT MK260E-TRM4 MK260E-TBP MK260E-TRM3 MK260E-TRM2 MK260E-TRM1 MK260E-CTR MK260E-FSW MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-CG11 MK260E-CG7 MK250E-ELB MK260E-SVA MK260E-BSRV MK260E-FTS MK260E-SRH MK260E-MNS MK260E-EWF2 MK260E-T14 MK260E-MVL MK260E-MEV MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK260E-CTC2 MK260E-DSTK MK260E-DST MK250E-EXP2 MK250E-FTD MK250E-OSE MK260E-RTA5 MK260E-RTA4 MK250E-LIQ MK250E-LIQA MK250E-SGL1 MK260E-BLT850 MK260E-WHR22 MK250E-OVP MK250E-CEB MK250E-CMP MK260E-DRA1 MK260E-EWF1 MK260E-RTA4 MK260E-RTA3 MK260E-RTA2 MK260E-CPT MK260E-RTA1 MK250E-CPG4 MK260E-TMPS MK250E-CPG3 MK260E-PLG MK250E-CPG2 MK260E-CLLM MK250E-CLLB MK250E-CLLT MK260E-CPG1 MK260E-EXC MK260E-CP16 MK260E-CG16 MK260E-BLT630 MK260E-CGN6 MK260E-CRP MK260E-FPRT MK260E-CRP MK250E-FBL MK250E-FAN MK250E-FGR MK250E-CON MK250E-CAB SPARE PART CODE REV PART LIST DATE Page 101 Page 102 81 86 87 85 83 84 82 92 81 98 89 88 91 90 97 38 1 35 36 96 32 95 37 34 44 75 33 46 45 25 78 72 71 41 28 27 76 80 79 77 73 70 43 74 40 93 94 9 42 39 10 29 11 26 65 10 9 66 61 63 11 62 64 13 31 3 69 68 67 23 30 5 54 59 6 52 56 59 51 4 55 47 60 59 8 7 2 49 58 15 12 48 50 53 24 19 18 20 17 16 57 21 14 22 8.1 - ED & Spare Part List MKE 10500 8.1 - ED & Spare Part List MKE 10500 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 CABINET FASTENER CABINET TOP2 CABINET TOP1 CABINET POST SECONDARY SIDE CABINET HANDLE 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 MOTOR THERMAL HEAT EXCHANGER CONTACTOR FAN CONTACTOR 7+(50ø1$/%/2&. THERMINAL BLOCK PROTECTION 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. CONTROLLER FAN SWICH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING CABLE GLAND PG11 CABLE GLAND PG7 ELECTRICAL BOX 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 CABINET REAR SIDE BOTTOM CABINET SIDE BOTTOM2 CABINET REAR BOTTOM1 CABINET REAR TOP CABINET REAR SIDE BOTTOM CABINET SIDE TOP CABINET FRONT TOP CABINET FRONT BOTTOM MAIN SWITCH ESD3 CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 FUSE PHASE PROTECTION RELAY BY PASS VALVE BY PASS SERVICE VALVE )/$7)ø77ø1*6 SENSOR HOLDER MANSON 1 2 ELBOW FITTINGS2 T14 MANUAL VALVE MEMBRAN VALVE MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD ELECTRONIC DISCHARGE DISTRIBUTOR CLAMP DISTRIBUTOR EXPANSION VALVE1 FILTER DRYER OIL SEPARATOR ROTOLOCK ADAPTOR5 ROTOLOCK ADAPTOR4 LIQUID RECEIVER LIQUID ACCUMULATOR SIGHT GLASS1 BOLT M8 50 WASHER 22 8 2 2 4 OVERLOAD PROTECTOR COMPRESSOR ELECTRICAL BOX COMPRESSOR DRAIN VALVE1 ELBOW FITTINGS1 ROTOLOCK ADAPTOR4 ROTOLOCK ADAPTOR3 ROTOLOCK ADAPTOR2 CUPPER T ROTOLOCK ADAPTOR1 25 24 23 22 21 COUPLING CLAMP 5 DEWPOINT SERVICE VALVE COUPLING CLAMP 4 REDUCTION COUPLING CLAMP 3 20 19 18 17 PLUG G 1 4 COUPLING CLAMP 2 COLLECTOR MANSON COLLECTOR BOTTOM COLLECTOR TOP 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 COUPLING CLAMP 1 HEAT EXCHANGER CABLE PLUG PG16 CABLE GLAND PG16 BOLT M6 30 CAGE NUT M6 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN BLADE FAN FAN GRILL CONDANSER CABINET BASE ITEM NO. MATERIAL NAME 28 1 2 2 12 2 1 1 1 1 4 1 1 1 1 1 1 3 4 1 2 1 2 4 3 9 1 24 1 1 1 1 3 3 3 2 8 1 1 3 1 1 5 6 3 4 4 1 5 2 2 1 1 1 1 1 1 2 2 1 1 2 14 14 2 2 2 6 8 4 6 2 4 6 2 1 2 2 2 1 12 4 1 1 12 6 2 5 58 58 2 1 12 3 3 3 1 1 QTY MK260E-CFS MK260E-CAT2 MK250E-CAT1 MK250E-CPS MK260E-CAH MK250E-CRS MK250E-CSB2 MK250E-CSB1 MK250E-CRT MK250E-CRS MK250E-CST MK250E-CFT MK250E-CFB MK260E-MSW MK260E-ES3 MK260E-PCP MK250E-CAL2 MK250E-CAL1 MK260E-FUS MK260E-PHR MK260E-MTRL MK260E-EXCN MK260E-FCT MK260E-TRM4 MK260E-TBP MK260E-TRM3 MK260E-TRM2 MK260E-TRM1 MK260E-CTR MK260E-FSW MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-CG11 MK260E-CG7 MK250E-ELB MK260E-SVA MK260E-BSRV MK260E-FTS MK260E-SRH MK260E-MNS MK260E-EWF2 MK260E-T14 MK260E-MVL MK260E-MEV MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK260E-CTC2 MK260E-DSTK MK260E-DST MK250E-EXP2 MK250E-FTD MK250E-OSE MK260E-RTA5 MK260E-RTA4 MK250E-LIQ MK250E-LIQA MK250E-SGL1 MK260E-BLT850 MK260E-WHR22 MK250E-OVP MK250E-CEB MK250E-CMP MK260E-DRA1 MK260E-EWF1 MK260E-RTA4 MK260E-RTA3 MK260E-RTA2 MK260E-CPT MK260E-RTA1 MK250E-CPG5 MK260E-TMPS MK250E-CPG4 MK250E-RDN MK250E-CPG3 MK260E-PLG MK250E-CPG2 MK260E-CLLM MK250E-CLLB MK250E-CLLT MK260E-CPG1 MK260E-EXC MK260E-CP16 MK260E-CG16 MK260E-BLT630 MK260E-CGN6 MK260E-CRP MK260E-FPRT MK260E-CRP MK250E-FBL MK250E-FAN MK250E-FGR MK250E-CON MK250E-CAB SPARE PART CODE REV PART LIST DATE Page 103 Page 104 81 86 88 87 85 83 84 82 92 81 93 101 90 91 89 95 94 96 35 36 97 31 100 32 37 34 33 99 38 1 60 75 78 72 71 59 76 80 79 77 73 70 42 74 59 98 51 52 56 8 7 64 54 41 63 55 29 27 26 24 39 65 12 40 11 49 43 66 48 50 53 47 28 45 44 61 46 11 62 23 69 68 67 25 13 30 22 29 21 7 8 15 58 19 18 3 16 4 17 57 14 10 9 6 5 2 20 8.1 - ED & Spare Part List MKE 12500 8.1 - ED & Spare Part List MKE 12500 CABINET FASTENER CABINET TOP2 CABINET TOP1 CABINET REAR SIDE BOTTOM2 CABINET BACK BOTTOM RIGHT CABINET BACK TOP RIGHT CABINET LEFT BOTTOM BACK CABINET LEFT TOP BACK CABINET POST SECONDARY SIDE CABINET SIDE BOTTOM2 CABINET HANDLE 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 CABINET REAR SIDE BOTTOM1 CABINET SIDE TOP CABINET FRONT RIGHT TOP CABINET FRONT LEFT TOP CABINET FRONT BOTTOM MAIN SWITCH ESD3 CONTROLLER PLASTIC CONTROL PANEL CABINET LEG2 CABINET LEG1 FUSE PHASE PROTECTION RELAY TRANSFORMER COMPRESSOR OVERLOAD PROTECTION FAN CONTACTOR 7+(50ø1$/%/2&. THERMINAL BLOCK PROTECTION 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. 7+(50ø1$/%/2&. CONTROLLER FAN SWICH HIGH PRESSURE SWICH LOW PRESSURE SWICH HINGE DOOR LOCK SWITCH CONNECTION FITTING CABLE GLAND PG7 CABLE GLAND PG19 ELECTRICAL BOX BY PASS VALVE BY PASS SERVICE VALVE )/$7)ø77ø1*6 SENSOR HOLDER MANSON 1 2 CABLE GLAND PG21 T14 MANUAL VALVE MEMBRAN VALVE MANIFOLD BLIND CAP2 MANIFOLD BLIND CAP1 MANIFOLD REINFORCEMENT SHEET METAL DRAIN MANIFOLD SOLENOID VALVE DISTRIBUTOR CLAMP DISTRIBUTOR EXPANSION VALVE1 OIL SEPARATOR FILTER DRYER ROTOLOCK ADAPTOR5 ROTOLOCK ADAPTOR4 LIQUID RECEIVER LIQUID ACCUMULATOR SIGHT GLASS1 BOLT M8 50 WASHER 22 8 2 2 4 FAN OVERLOAD PROTECTOR COMPRESSOR ELECTRICAL BOX COMPRESSOR LOWER PLATE COMPRESSOR DRAIN VALVE1 ELBOW FITTINGS1 ROTOLOCK ADAPTOR4 ROTOLOCK ADAPTOR3 ROTOLOCK ADAPTOR2 CUPPER T 25 24 23 22 21 ROTOLOCK ADAPTOR1 COUPLING COVER COUPLING CLAMP 4 DEWPOINT SERVICE VALVE COUPLING CLAMP 3 20 19 18 17 PLUG G 1 4 COUPLING CLAMP 2 COLLECTOR MANSON COLLECTOR BOTTOM COLLECTOR TOP 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 COUPLING CLAMP 1 HEAT EXCHANGER CABLE GLAND PG16 CABLE GLAND PG36 CONDENSER LOWER PLATE SUPPORT CONDENSER SUPPORT ADDITIONAL BOLT M6 30 CAGE NUT M6 CONDENSER REINFORCEMENT PLATE FAN PROTECTOR BOLT M8 30 FAN CONDANSER CABINET BASE ITEM NO. MATERIAL NAME DATE 34 1 2 3 1 1 1 1 6 1 15 2 6 1 1 1 1 1 1 1 3 4 1 1 1 3 4 3 9 1 24 1 1 1 1 3 3 3 1 1 1 1 3 1 1 5 1 3 4 5 1 5 2 2 1 1 1 1 1 1 4 4 2 1 2 16 16 3 2 1 2 7 15 5 7 2 6 7 2 2 1 2 1 14 3 1 1 14 7 2 2 2 2 70 70 2 1 24 6 1 1 QTY MK260E-CFS MK260E-CAT2 MK260E-CAT1 MK260E-CRS2 MK260E-CBR MK260E-CTR MK260E-CBB MK260E-CLB MK260E-CPS MK260E-CSB2 MK260E-CAH MK260E-CRS1 MK260E-CST MK260E-CGT MK260E-CLT MK260E-CFB MK260E-MSW MK260E-ES3 MK260E-PCP MK260E-CAL2 MK260E-CAL1 MK260E-FUS MK260E-PHR MK260E-TRF MK260E-COP MK260E-FCN MK260E-TRM4 MK260E-TBP MK260E-TRM3 MK260E-TRM2 MK260E-TRM1 MK260E-CTR MK260E-FSW MK260E-HPS MK260E-LPS MK260E-HNG MK260E-DLK MK260E-SCF MK260E-CG7 MK260E-CG19 MK260E-ELB MK260E-SVA MK260E-BSRV MK260E-FTS MK260E-SRH MK260E-MNS MK260E-CG21 MK260E-T14 MK260E-MVL MK260E-MEV MK260E-MBC2 MK260E-MBC1 MK260E-MRS MK260E-DRM MK260E-SLV MK260E-DSTK MK260E-DST MK260E-EXP2 MK260E-OSE MK260E-FTD MK260E-RTA5 MK260E-RTA4 MK260E-LIQ MK260E-LIQA MK260E-SGL1 MK260E-BLT850 MK260E-WHR22 MK260E-FOP MK260E-CEB MK260E-CLP MK260E-CMP MK260E-DRA1 MK260E-EWF1 MK260E-RTA4 MK260E-RTA3 MK260E-RTA2 MK260E-CPT MK260E-RTA1 MK260E-CPC MK260E-CPG4 MK260E-TMPS MK260E-CPG3 MK260E-PLG MK260E-CPG2 MK260E-CLLM MK260E-CLLB MK260E-CLLT MK260E-CPG1 MK260E-EXC MK260E-CG16 MK260E-CG36 MK260E-CPS MK260E-CSA MK260E-BLT630 MK260E-CGN6 MK260E-CRP MK260E-FPRT MK260E-CRP MK260E-FMT MK260E-CON MK260E-CAB SPARE PART CODE REV PART LIST Page 105 9. COMPONENTS LOCATION All main components located into dryer identified with labels as listed here under. CAUTION: Due to manufacture design, some components out of the list are not installed into the dryer. Electrical components: Accessories : A01: A02: A10: A11: A20: A30: A31: A40: EV3 A50-3: Control circuit transformer Power circuit transformer ON warning light OFF warning light Drain solenoid valve Cranckase heater Electrical resistor Electrical capacity Digital Controller (Digi-Pro) Energy saving device 3 (ESD3) K01: K10: K20: K30: Compressor motor relay Fan motor relay Drain timer or Bekomat (optional) Temperature Controller Relays : Switches : S01: S02: S03: S10: S11: S12: S13: S20: S21: Main switch Start push button Stop push button Fan pressure control High-low pressure security control High pressure security control Low pressure security control Refrigerant temperature control Air temperature control M01: M10: Refrigerant compressor motor Fan motor P01: P10: Refrigerant compressor thermal overload Fan motor thermal overload Motors : Thermal protections : Fuses protections : See complete identification into electrical sketch included in dryer F--: F--: F--: F--: F--: F--: Transformer protection Fan protection Compressor relay protection Transformer protection Drain protection Fan relay protection Refrigerant components: G01: G02: G03: G04: G05: G06: G10: G11: G20: G21: Liquid receiver Refrigerant drier Expansion valve Liquid separator Hot gas bypass valve Refrigerant solenoid valve Water cooled condenser Water control valve Refrigerant evaporating pressure gauge Refrigerant evaporating temperature gauge Compressed air components : H01: H11: H12: Air inlet prefilter Drain filter Pneumatic drain valve Terminal boxes: B01: B11: B12: Page 106 Main terminal box Refrigeranbt unit termal box Free of potential terminal box Problem Possible Cause Repair Comments Dryer is switched on, indicator light is lit but the refrigerant compressor does not turn on. The connection has inverted phases Invert two phases 3-phase dryers are equipped with a phase controller to avoid the fans from turning in the opposite direction. Refrigeration unit is not functioning Check refrigeration compressor Several factors can cause compressor failure. A qualified refrigeration technician needs to check all the electrical and refrigerant circuit and controls. The refrigerant highpressure protection has tripped The refrigerant safety high pressure switch has tripped. The dryer is protected against excessively high refrigerant pressure. If the condenser efficiency has reduced, the switch will trip. Manually reset the switch. In case of water cooled condensers, check the water control valve Excessive ambient temperature Be sure that dryer is working in temperatures lower than the design conditions. Designed conditions and correction factors are described in this manual. A high ambient temperature may cause the refrigerant system to operate at higher than normal pressures. Results will be higher than normal evaporator temperature. lmportant: adequate air circulation around the dryer, and proper ventilation in the equipment room should guarantee a low enough ambient temperature. Excessive temperature on crankcase of compressor. Allow time to compressor to cool down. Reason may be a possible incorrect adjustment of hot gas bypass valve or shortage of refrigerant Compressor is protected against overly high temperatures of the crankcase by a thermal switch. Excessive compressed air inlet temperature. Be sure that dryer is working in temperatures lower than design conditions. The dryer is designed for working in calculated conditions (see description in this manual). If conditions are exceeded, the dryer will be overflowed, dew point will go up and protecting devices can switch off. Clogged condenser fins or clogged water condenser. Possible high crankcase temperature Possible loss of phase Possible low voltage causing overload trip Possible failed compressor Clear fins or water condenser of all obstructions. The clogged fins in the condenser will restrict the air passage and reduce the refrigeration capacity, causing high temperature in the evaporator. Same will occur if water condenser is clogged with mud or dirt. Air condenser and water condenser should be periodically checked and cleaned. Protect water circuit by an adapted filter. Too much compressed air flow. Check actual flow through the dryer. This dryer is designed for a maximum air flow at design conditions. If too much air is pumped into the dryer, water removal capacity may not be sufficient, resulting in liquid carryover down stream. Check the rated output the air compressor. Faulty electrical wiring Inspect the circuit The compressor-on light should be wired into the refrigerant compressor circuit. See wiring diagrams in this manual. One electrical protection has tripped. Reset the protection or replace the blown fuse. The dryer is protected against high amp draw by fuse and/or overload relay that can trip in case of need. Reset or replace fuse once, but do not persist if it trips again, request assistance from a qualified refrigeration contractor. Dryer is switched on but fan is not running. Fan has to run if refrigerant high pressure reaches upper set point. Check that compressed air flows through the dryer. Check that fan blades are free to move. Check the fan pressure switch. Fan operates automatically to keep refrigerant pressure below the maximum value. The fan can stop if pressure is under the recommended setting. When compressor starts, it vibrates a lot and makes mechanical noise. Compressor is slugging liquid refrigerant at start up. Be sure the pre-heating period of at least 2 hours is respected Refrigerant may move between receivers when refrigerant compressor is stopped and not heated, especially if stopped for a long time. This migration may cause liquid shock (slugging) in valves specially on large dryers containing more refrigerant Dryer is switched on, but the refrigerant compressor does not turn on. Page 107 Problem Possible Cause Repair Comments Water in system Compressed Air Inlet and outlet connections are reversed. Check inlet and outlet connections. This dryer is designed for air flow in one direction only. Inlet and outlet directions are identified on the dryer. Drain system is clogged or inoperative. Restore a free flow of water condensate. Check water evacuation. Drain system is timed solenoid valve, pneumatically assisted which has to be adjusted in accordance with values listed in this manual. The Solenoid valve includes a strainer that has to be periodically checked and cleaned. Membranes of pneumatically assisted drain have to be checked or replaced every 6 months. Bypass system is open Check the valves Important: Bypass piping should be installed around the dryer so the dryer can be isolated for service without shutting down the air supply. During dryer operation, valves must be set so all air goes into the system. Check tightness of the bypass system. Free moisture remains in pipe lines. Blow out the system Before the dryer is first started all free moisture should be blown out of the system. Excessive air flow Check actual flow through the dryer. This dryer is designed for a maximum air flow. If too much air is pumped into the dryer, water removal capacity may not be sufficient, resultingin liquid Carry over downstream. Check the rated flow of the air compressor . Excessive free moisture Check the separator and drain system and compressor after cooler ahead of the dryer. In some system there may be an accumulation of free moisture in the line ahead of the dryer. If this moisture is pumped into the dryer intermittently, the water removal capacity may not be sufficient. A water separator should be installed in the line before the dryer. Excessive compressed air inlet temperature. Be sure that dryer is working lower than design conditions The dryer is designed to work for calculated design conditions. Should the conditions be exceeded, the dryer will be overflowed, dew point will go up and protecting devices can switch off. Clogged condenser fins Clear fins of all obstructions The clogged fins in the condenser will restrict air passage and reduce refrigerant capacity causing water downstream. Fins should be periodically checked and cleaned. Shortage of refrigerant Fix the leak and add a charge of refrigerant. Loss of refrigerant will cause improper functioning. A qualified, refrigeration specialist should perform the necessary repairs, or factory should be contacted if the unit is in warranty. Refrigeration system is not functioning Check to be certain refrigerant compressor is running To check if the compressor is running, check compressor-on light. lt is possible for the fan to be operating but not the compressor. Compressor not running can be caused by several taeters. A qualified refrigeration technician should check all refrigerant and electrical controls Excessive pressure dew point Readjust refrigerant evaporating pressure The refrigerant pressure adjustment should be done by a qualified refrigeration engineer. This is a very sensitiye device and incorrect settings may create other failures. Excessive compressed air flow or too law air inlet pressure. Check actual pressure and flow through the dryer. This dryer is designed for a maximum air flow. If too much air is pumped into the dryer, water removal capacity may not be sufficient, resulting in liquid carry-over downstream. Check the rated flow of the air compressor. Freeze up Check that compressor room ambient, Frosting of the Iines is an indication that controls are set too low. The following should be done by an experienced refrigeration technician. High pressure drop Fan switch could have failed in closed position keeping fan on. The unit will not run or cycles off and on. Page 108 Controls may be adjusted in the fields by means of the hot gas bypass valve. This is to be done by a qualified refrigerant technician. Clogged heat exchanger Clean heat exchanger with areverse air flow. Dryer are supposed to be used with compressed air free of any aggressive contaminants. Some contamination may require extra maintenance of the heat exchanger. Line disconnect switch is open. Close the start or disconnect switch. If the dryer is not operating, check the disconnect switch or circuit breaker to be certain it is on. Fuse or breaker is open Replace fuse or reset breaker. The fuse to the power line should be checked and replaced if needed. Never replace a burnt fuse with an oversized fuse. Faulty refrigerant compressor or controls. Determine the cause and make correction Failure of compressor to run may be caused by several factors. A qualified refrigeration specialist should check all electrical and refrigeration controls, or factory should be contacted if unit is in warranty. Excessive compressed air inlet temperature. Design conditions and correction factors are described in this manual. Be sure that dryer is working in ambient temperatures below design conditions. The dryer is designed for working into calculated design conditions. Should the conditions be exceeded, the dryer will be overflowed, dew point will go up and protecting devices may trip. Problem Possible Cause Repair Comments The unit will not run or cycles off and on. Excessive ambient temperature Designed conditions and correction factors are described in dryer . Be sure that dryer is working lower than design conditions. A high ambient temperature may cause the refrigerant system to operate at higher than normal pressures. Results will be a higher than normal evaporator temperature. Important: there should be adequate air circulation around the dryer, and proper ventilation in the equipment room should guarantee a low enough ambient temperature. Clogged condenser fins Clear fins of all obstructions. The clogged fins in the condenser will restrict the air passage and reduce the refrigeration capacity, causing high temperature in the evaporator. Fins should be periodically checked and cleaned. Shortage of refrigerant Fix the leak and add a charge of refrigerant. Loss of refrigerant will cause improper functioning. Dryers are equipped with a temperature switch which maintains the amount of refrigerant to maintain proper cooling of the compressor. A shortage of refrigerant may cause suction line to become very hot, causing the temperature switch to trip. A qualified refrigeration specialist should perform the necessary repairs. Error sign occurs on digital temperature control device The dew point is too low or too high Check refrigerant gas and make sure that the working conditions are within the correct range. If there is not enough refrigerant gas or if the working temperature and inlet temperatures are very high, the dew point will increase. Drain Failure Back pressure or reduction of drain port. Back First of all replace the drain / drains. Open drain to atmosphere (no back pressure) -  if hose / pipe is used to carry the drain somewhere else; keep or enlarge the diameter. Max drain hose length after the dryer must not exceed 10 meters. Max drain hose height from the dryer must not exceed 3 meters. The drain port size should not be reduced. There should not be any fitting that may cause pressure drop such as valves, elbow, tees, etc. on the drain connection. Drain should be at atmospheric pressure at all times. Any back pressure will result in failure and malfunction. Refrigerated Dryer (MKE) WARRANTY POLICY When used under the conditions recommended by the manufacturer Mikropor, MKE Dryer is warranted to be free from defects in material and workmanship for a period of twenty-four (24) months from date of receipt, not to exceed thirty (30) months from the factory ship date, provided Mikropor is furnished the customer’s name, address, and date of shipment information. The heat exchanger will be warranted for two (2) years. This warranty is limited to the replacement of the heat exchangers, F.O.B. Factory, and subject to the same restrictions as outlined below concerning misuse, abuse or accident. The standard equipment external float drain and optional automatic drain carry a 90-day warranty. This warranty will apply to equipment installed, operated and maintained in accordance with the procedures and recommendations as outlined in the owner’s manual published by Mikropor during the life of this warranty, Mikropor will repair or replace (at Mikropor option) any defective part or assembly free of charge F.O.B. its warehouse if such defect occurred in normal service and was not due to apparent misuse, abuse or accident. This Warranty is not transferable. Any warranty service performed in the field must be authorized by Mikropor Unauthorized service voids the warranty and any resulting charges will not be paid by Mikropor. Mikropor makes no other warranties or guarantees, expressed or implied. The merchantability of the components is expressly excluded. The manufacturer assumes no liability for indirect or consequential damages. Page 109 firstAir is a brand of ALMiG Kompressoren GmbH Adolf-Ehmann-Str.2 73257 Köngen, Germany Email: info@firstaircompressors.com www.firstaircompressors.com Article number 195. 03706