Service Manual Cd-m10000w Cp-m10000 Model

Transcript

CD-M10000W/CP-M10000 SERVICE MANUAL No. SY183CDM1000W MINI COMPONENT SYSTEM MODEL CD-M10000W SPEAKER SYSTEM MODEL CP-M10000 • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used. CONTENTS Page SAFETY PRECAUTION FOR SERVICE MANUAL ........................................................................................................... 2 VOLTAGE SELECTION ..................................................................................................................................................... 2 AC POWER SUPPLY CORD AND AC PLUG ADAPTOR ................................................................................................. 2 SPECIFICATIONS ............................................................................................................................................................. 3 NAMES OF PARTS ........................................................................................................................................................... 4 OPERATION MANUAL ...................................................................................................................................................... 6 DISASSEMBLY .................................................................................................................................................................. 9 REMOVING AND REINSTALLING THE MAIN PARTS ................................................................................................... 12 ADJUSTMENT ................................................................................................................................................................. 13 BLOCK DIAGRAM ........................................................................................................................................................... 17 SCHEMATIC DIAGRAM / WIRING SIDE OF P.W.BOARD .............................................................................................. 20 VOLTAGE ........................................................................................................................................................................ 38 NOTES ON SCHEMATIC DIAGRAM .............................................................................................................................. 39 TYPES OF TRANSISTOR AND LED ................................................................................................................................ 39 WAVEFORMS OF CD CIRCUIT ...................................................................................................................................... 40 TROUBLESHOOTING ..................................................................................................................................................... 41 FUNCTION TABLE OF IC ................................................................................................................................................ 45 FL DISPLAY ...................................................................................................................................................................... 53 REPLACEMENT PARTS LIST/EXPLODED VIEW SHARP CORPORATION –1– This document has been published to be used for after sales service only. The contents are subject to change without notice. CD-M10000W/CP-M10000 SAFETY PRECAUTION FOR SERVICE MANUAL WARNINGS THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1 BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR CLASS 1. THEREFORE IT IS IMPORTANT THAT THE FOLLOWING PRECAUTIONS ARE OBSERVED DURING SERVICING TO PROTECT YOUR EYES AGAINST EXPOSURE TO THE LASER BEAM. 1-WHEN THE CABINET IS REMOVED, THE POWER IS TURNED ON WITHOUT A COMPACT DISC IN POSITION AND THE PICKUP IS ON THE OUTER EDGE THE LASER WILL LIGHT FOR SEVERAL SECONDS TO DETECT A DISC. DO NOT LOOK INTO THE PICKUP LENS. 2-THE LASER POWER OUTPUT OF THE PICKUP UNIT AND REPLACEMENT SERVICE PARTS ARE ALL FACTORY PRESET BEFORE SHIPMENT. DO NOT ATTEMPT TO READJUST THE LASER PICKUP UNIT DURING REPLACEMENT OR SERVICING. 3-UNDER NO CIRCUMSTANCES STARE INTO THE PICKUP LENS AT ANY TIME. 4-CAUTION-USE OF CONTROLS OR ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Laser Diode Properties Material: GaAIAs Wavelength: 780 nm Emission Duration: continuous Laser Output: max. 0.6 mW VOLTAGE SELECTION Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage as follows. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V-240 V AC). AC POWER SUPPLY CORD AND AC PLUG ADAPTOR QACCA0005AW00 QACCL0007AW00 QACCE0014AW00 QPLGA0003AWZZ –2– QPLGA0005AWZZ CD-M10000W/CP-M10000 FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. SPECIFICATIONS CP-M10000 CD-M10000W General Power source Power consumption Dimensions Weight Main speaker AC 110/127/220/230 - 240 V, 50/60 Hz 260 W 2-way 3-speaker system 13 cm (5-1/4") Woofer 2 8 cm (3-1/8") Tweeter Maximum input power 300 W (Total) 150 W Rated input power (Total) 6 ohms Impedance Width: 330 mm (13") Dimensions Height: 197 mm (7-13/16") Depth: 322 mm (12-11/16") 4.8 kg (10.6 lbs.)/each Weight Type Width: 270 mm (10-5/8") Height: 330 mm (13") Depth: 458 mm (18") 14.3 kg (31.5 lbs.) Amplifier Output power Main speakers: MPO: 580 W (290 W + 290 W) (10 % T.H.D.) RMS: 300 W (150 W + 150 W) (10 % T.H.D.) RMS: 220 W (110 W + 110 W) (0.9 % T.H.D.) Woofers: Woofer Woofer 25 cm (10") Woofer Maximum input power 400 W (Total) 200 W Rated input power (Total) 6 ohms Impedance Dimensions Width: 330 mm (13") Height: 330 mm (13") Depth: 378 mm (14-7/8") Weight 8.6 kg (19.0 lbs.)/each Type MPO: 900 W (450 W + 450 W) (10 % T.H.D.) RMS: 400 W (200 W + 200 W) (10 % T.H.D.) Output terminals RMS: 280 W (140 W + 140 W) (0.9 % T.H.D.) Main speakers: 6 ohms Woofers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Input terminals Video/Auxiliary (audio signal): 500 mV/47 kohms Microphone: 1 mV/600 ohms CD player Type Signal readout 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup D/A converter 1-bit D/A converter Frequency response Dynamic range 20 - 20,000 Hz 90 dB (1 kHz) Specifications for this model are subject to change without prior notice. Tuner Frequency range FM: 88 - 108 MHz AM: 531 - 1,602 kHz Cassette deck Frequency response Signal/noise ratio Wow and flutter 50 - 14,000 Hz (Normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) 0.3 % (WRMS) –3– CD-M10000W/CP-M10000 NAMES OF PARTS CD-M10000W Front panel 6 1. Disc Tray 2. Timer Set Indicator 3. On/Stand-by Button 4. Tape 2 Cassette Compartment 5. Tape 1 Cassette Compartment 6. Equaliser Mode Select Button 7. Volume Control 8. Monster Bass/Demo Mode Button (with Indicator) 9. Disc Tray Open/Close Button 10. Disc Number Select Buttons (with Indicator) 11. Disc Skip Button 12. Tuning and Time Up Button 13. Tape 2 Reverse Play Button (with Indicator) 14. CD Button 15. Tuner (Band) Button 16. Tape (1 2) Button 17. Video/Auxiliary Button 18. Dimmer Button 19. Clock Button 20. Timer/Sleep Button 21. Headphone Socket 22. CD or Tape Stop Button (with Indicator) 23. CD Play or Repeat, Tape 1 Play, Tape 2 Forward Play Button (with Indicator) 24. Tape 2 Reverse Mode Select Button 25. CD Track Up or Fast Forward, Tape 2 Fast Wind, Tuner Preset Up Button 26. Tuning and Time Down Button 27. Memory/Set Button 28. Tape 2 Record Pause Button 29. CD Track Down or Fast Reverse, Tape 2 Fast Wind, Tuner Preset Down Button 30. Microphone Level Control 31. Microphone Socket 7 8 9 10 11 1 2 3 4 5 12 13 14 15 16 17 22 23 24 25 18 19 20 21 26 27 28 29 30 31 Display 1. FM Stereo Mode Indicator 2. FM Stereo Receiving Indicator 3. Karaoke Mode Indicator 4. CD Repeat Play Indicator 5. CD Pause Indicator 6. CD Play Indicator 7. Tape 2 Record Indicator 8. Tape Reverse Mode Indicator 9. Disc Number Indicators 10. Timer Play Indicator 11. Memory Indicator 12. Tape 2 Reverse Play Indicator 13. Tape 1 Play or Tape 2 Forward Play Indicator 14. Sleep Indicator 15. Timer Recording Indicator 16. Spectrum Analyser/Volume Level Indicator 7 8 1 2 345 6 16 –4– 16 9 10 11 12 13 14 15 16 CD-M10000W/CP-M10000 CD-M10000W Rear panel 1 1. Cooling Fan 2. FM 75 Ohms Aerial Terminal 3. FM Aerial Earth Terminal 4. AM Loop Aerial Socket 5. Span Selector Switch 6. Video/Auxiliary (Audio Signal) Input Sockets 7. Main Speaker Terminals 8. Woofer Terminals 9. AC Voltage Selector 10. AC Power Lead 1 2 3 4 5 6 9 7 7 10 8 1 Remote control 1. Remote Control Transmitter 2. Disc Number Select Buttons 3. CD Random Button 4. CD Memory Button 5. CD Track Up or Fast Forward, Tape 2 Fast Wind Button 6. Tuner Preset Up Button 7. Tape 2 Reverse Play Button 8. Tape 2 Record Pause Button 9. Tuner Preset Down Button 10. CD Button 11. Tuner (Band) Button 12. Equaliser Mode Select Button 13. Monster Bass Button 14. On/Stand-by Button 15. Karaoke Mode Button 16. Echo Level Up and Down Buttons 17. CD Clear Button 18. CD Track Down or Fast Reverse, Tape 2 Fast Wind Button 19. CD Play or Repeat, Tape 1 Play Tape 2 Forward Play Button 20. CD Pause Button 21. CD or Tape Stop Button 22. Video/Auxiliary Button 23. Tape (1 2) Button 24. Volume Up and Down Buttons 14 2 15 16 3 4 5 6 7 8 9 10 11 12 13 Buttons with " " mark in the illustration can be operated on the remote control only. Other buttons can be operated both on the main unit and the remote control. –5– 17 18 19 20 21 22 23 24 CD-M10000W/CP-M10000 CP-M10000 Main speaker 3 1. Woofer 2. Tweeter 3. Bass Reflex Duct 4. Speaker Terminals 1 2 1 4 Woofer 1. Woofer 2. Bass Reflex Duct 3. Speaker Terminals 2 3 1 OPERATION MANUAL System connections (Except for Australia/New Zealand) Setting the AC voltage selector Setting the FM/AM span selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC). Connecting the AC power lead After making all connections, plug the unit. If you plug the unit first, the unit will enter the demonstration mode. Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. AC Plug Adaptor In areas (or countries) where a wall socket as shown in illustration is used, connect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug adaptor is not included in areas where the wall socket and AC power plug can be directly connected (see illustration ). 1 The International Telecommunication Union (ITU) has established that member countries should maintain either a 100 kHz or a 50 kHz interval between broadcasting frequencies of FM stations and 10 kHz or 9 kHz for AM station. The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2). Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to the interval (span) of your area. To change the tuning zone: 2 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Set the SPAN SELECTOR switch (on the rear panel) as follows. For 50 kHz FM interval (9 kHz in AM) 50/9 For 100 kHz FM interval (10 kHz in AM) 100/10 3 Whilst pressing down the button and the MONSTER-BASS button, press the ON/ STAND-BY button until "CLEAR AL" appears. Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. –6– CD-M10000W/CP-M10000 System connections (For Australia/New Zealand) Setting the AC voltage selector Setting the FM/AM span selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC). Connecting the AC power lead After making all connections, plug the unit. If you plug the unit first, the unit will enter the demonstration mode. Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. 230V 240V The International Telecommunication Union (ITU) has established that member countries should maintain either a 100 kHz or a 50 kHz interval between broadcasting frequencies of FM stations and 10 kHz or 9 kHz for AM station. The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2). Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to the interval (span) of your area. Wall socket To change the tuning zone: 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Set the SPAN SELECTOR switch (on the rear panel) as follows. For 50 kHz FM interval (9 kHz in AM) 50/9 For 100 kHz FM interval (10 kHz in AM) 100/10 3 Whilst pressing down the button and the MONSTER-BASS button, press the ON/ STAND-BY button until "CLEAR AL" appears. (230 - 240 V, 50/60 Hz) Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. Setting the clock 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. When the 12-hour display is selected, "AM" will change automatically to "PM". 5 Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display. 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING/TIME ( or ) button to select 24-hour or 12hour display and then press the MEMORY/SET button. Press the TUNING/TIME ( or ) button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. The hour will not advance even if minutes advance from "59" to "00". The clock begins counting from "0" seconds. (Seconds are not displayed.) The time display will disappear after a few seconds. Press the CLOCK button and within 5 seconds, press the MEMORY/SET button. To confirm the time display: Press the CLOCK button. The time display will appear for about 5 seconds. Note: The "CLOCK" or time will flash at the push of the CLOCK button when the AC power supply is restored after a power failure or unplugging the unit. Readjust the clock as follows. "0:00" "AM 12:00" The 24-hour display will appear. (0:00 - 23:59) The 12-hour display will appear. To readjust the clock: Perform "Setting the clock" from the beginning. If the time display is flashing, step 3 (for selecting the 24-hour or 12-hour display) will be skipped. (AM 12:00 - PM 11:59) "AM 0:00" The 12-hour display will appear. To change the 24-hour or 12-hour display: (AM 0:00 - PM 11:59) 1 Clear all the programmed contents. 2 Perform "Setting the clock" from the beginning. Note that this can only be set when the unit is first installed or it has been reset. –7– CD-M10000W/CP-M10000 Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. General Symptom The clock is not on time. Possible cause Did a power failure occur? Reset the clock. When a button is pressed, the unit does not respond. Set this unit to the power stand-by mode and then turn it back on. Symptom Cannot record. Possible cause Is the erase-prevention tab removed? Cannot record tracks with proper sound quality. Cannot erase completely. Is it a normal tape? (You cannot record on a metal or CrO tape.) Sound skipping. Is there any slack? Is the tape stretched? Are the capstans, pinch rollers, or heads dirty? Cannot hear treble. Sound fluctuation. Cannot remove the tape. If the unit still malfunctions, reset it. No sound is heard. Cassette deck Is the volume level set to "0"? Are the headphones connected? Are the speaker wires disconnected? Is the karaoke mode set to "L-CH", "R-CH" or "V-CANCEL"? Karaoke Symptom The vocal part of a multiplexed disc is not heard. CD player Symptom Playback does not start. Playback stops in the middle or is not performed properly. Possible cause Is the disc loaded upside down? Does the disc satisfy the standards? Is the disc distorted or scratched? Playback sounds are skipped, or stopped in the middle of a track. Is the unit located near excessive vibrations? Is the disc very dirty? Possible cause Is the karaoke mode set to "L-CH", "R-CH" or "V-CANCEL"? Remote control Symptom The remote control does not operate. Possible cause Is the AC power lead of the unit plugged in? Is the battery polarity respected? Are the batteries dead? Is the distance or angle incorrect? Has condensation formed inside the unit? Does the remote control sensor receive strong light? Tuner Symptom Radio makes unusual noise consecutively. If a power failure occurs during playback, the heads remain engaged with the tape. Do not open the compartment forcibly. Wait until electricity resumes. Possible cause Is the unit placed near the TV or computer? Is the FM aerial or AM loop aerial placed properly? Move the AC power lead away from the aerial if located near. Remote control Troubleshooting chart Test of the remote control If trouble occurs Check the remote control after checking all connections have been made correctly. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. Face the remote control directly to the remote sensor on the unit. The remote control can be used within the range shown below: If su ch a problem occu rs, do th e following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the music. Note: Remote sensor If neither operation above restores the unit, clear all the memory by resetting it. Clearing all the memory (reset) 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the button and the MONSTER-BASS button, press the ON/STAND-BY button until "CLEAR AL" appears. . Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. Before transporting the unit 1 2 3 4 5 Press th e ON/STAND-BY butt on to tu rn th e power on. Press th e CD butto n. Press th e OPEN/CLOSE butto n to open th e disc tray. Remove all CDs inserted in the unit. Press th e OPEN/CLOSE butto n to cl ose the disc tray. Make sure that "NO DISC" is displayed. Press th e ON/STAND-BY butto n to enter th e stand-by mode,and then unplug th e AC power lead fro m the wall so cket. –8– 0.2 m - 6 m (8" - 20') CD-M10000W/CP-M10000 DISASSEMBLY Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling. 4. Take sufficient care on static electricity of integrated circuits and other circuits when servicing. CD-M10000W (A1) x 2 ø3 x 12mm Top Cabinet (A1) x 2 ø3 x 12mm Side Panel (Right) (B1) x 4 ø3 x 10mm CD-M10000W STEP REMOVAL PROCEDURE FIGURE 1 Top Cabinet 1. Screw ....................... (A1) x4 9-1 2 Side Panel (Left/Right) 1. Screw ..................... (B1) x12 9-1 3 CD Player Unit/ CD Tray Cover 1. Turn on the power supply, ... open the disc tray, take out the CD tray cover, and close. (Note 1) 2. Screw ....................... (C1) x1 3. Hook ......................... (C2) x3 4. Hook ......................... (C3) x2 5. Socket ...................... (C4) x2 9-2 1. Screw ..................... (D1) x11 2. Socket ...................... (D2) x1 9-2 5 Main PWB 1. Screw ....................... (E1) x1 2. Flat Cable ................ (E2) x1 3. Socket ...................... (E3) x5 9-2 10-2 1. Screw ....................... (F1) x8 2. Socket ...................... (F2) x3 3. PWB Holder ............. (F3) x5 4. Flat Wire ................... (F4) x1 10-3 1. Screw ....................... (G1) x3 2. Socket ...................... (G2) x1 3. Hook ......................... (G3) x2 10-3 10-2 10-3 8 Mic PWB 1. Screw ....................... (H1) x2 2. Lug Wire ................... (H2) x1 10-4 9 Display PWB 1. Knob .......................... (J1) x1 2. Screw ...................... (J2) x10 3. Flat Cable ................. (J3) x1 10-4 10 Tape Mechanism 1. Open the cassette holder. 2. Screw ....................... (K1) x6 10-4 11 Headphones PWB 1. Screw ....................... (L1) x1 10-4 12 Turntable 1. Hook ........................ (M1) x2 2. Cover ...................... (M2) x1 10-5 1. Turn fully the lock lever in the . arrow direction. 2. While holding the lock lever,rotate the cam gear until the cam gear rib engages with the clamp lever. 3. Push the slide chassis backward to engage the claw with the groove and remove it in the direction of the arrow. ................. (N1) x6 9-3 14 15 CD Servo PWB (Note 2) CD Mechanism CD Tray Cover (C2) x 3 (D1) x 2 ø3 x 10mm 1 (C3) x 1 2 CD Player Unit (C1) x 1 ø3 x 10mm Front Panel Disc Tray Figure 9-1 Pull 7 13 Side Panel (Left) 1 Rear Panel with Fan Motor Amp. PWB Rear Panel CD Servo PWB (C4) x 2 4 6 (B1) x 4 ø3 x 10mm (B1) x 4 ø3 x 10mm (C3) x 1 (E1) x 1 ø3 x 10mm Lug Wire (D2) x 1 Amp. PWB Rear Panel (D1) x 2 ø3 x 10mm Main PWB (D1) x 7 ø3 x 10mm Figure 9-2 Lock Lever 10-1 CD Player Unit (Bottom View) 10-6 1. Screw ....................... (P1) x1 2. Hook ......................... (P2) x3 3. Socket ...................... (P3) x4 11-1 1. Hook ......................... (Q1) x2 2. Hook ......................... (Q2) x3 11-2 Figure 9-3 Note 2: 1. After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of the connector so as to protect the optical pickup from electrostatic damage. Note 3: 1. Be careful not to break the claw of the CD mechanism. 2. When fining back the cam gear assembly, let it lock by front movement. Note 1: How to open the changer manually. (Fig. 9-3) 1. In this state, turn fully the lock lever in the arrow direction through the hole on the loading chassis bottom. 2. While holding the lock lever, rotate the cam gear anticlockwise until the cam gear rib engages with the clamp lever. (Fig. 10-1) 3. After that, push forward the slide Chaissis. –9– CD-M10000W/CP-M10000 (J1) x 1 (J3) x 1 Clamp Lever (H2) x 1 Display PWB (J2) x 10 ø3 x 10mm (H1) x 2 ø3 x 10mm CD Player Unit (Top View) Front Panel Lug Wire Cam Gear Rib Open (K1) x 6 ø3 x 10mm Cassette Holder Tape Mechanism Mechanism Dust Cover Figure 10-1 (L1) x 1 ø3 x 10mm Lug Wire (E3) x 1 (E3) x 1 (G2) x 1 Tape Mechanism Headphones PWB Front Panel (E3) x 1 Mic PWB Figure 10-4 (E3) x 1 (M2) x 1 Mic PWB Power PWB Turntable (E2) x 1 Transformer PWB Main PWB (E3) x 1 Amp. PWB Main PWB Slide Chassis (M1) x 2 Amp. PWB Figure 10-2 (F2) x 2 (F1) x 4 ø3 x 6mm CD Player Unit (F4) x 1 (F1) x 2 ø3 x 10mm (F1) x 2 ø3 x 6mm Figure 10-5 Headphones PWB (N1) x 3 Slide Chassis (G3) x 1 Front Panel 3 2 (F2) x 1 1 (G3) x 1 (F3) x 4 Push (F3) x 1 Push Amp. PWB (N1) x 3 CD Player Unit (G1) x 3 ø3 x 10mm Figure 10-3 Figure 10-6 – 10 – CD-M10000W/CP-M10000 (P1) x 1 ø3 x 8mm CD Servo PWB CD Mechanism Slide Chassis (Q2) x 3 (P3) x 2 CD Mechanism Chassis (Q1) x 1 (P2) x 3 (Q1) x 1 (P3) x 2 Slide Chassis Figure 11-1 Figure 11-2 CP-M10000 STEP REMOVAL PROCEDURE FIGURE 1 Woofer (Woofer) 1. Front Panel ............ (A1) x1 2. Screw ..................... (A2) x8 11-3 11-4 2 Super Tweeter 1. Front Panel ............ (B1) x1 2. Screw ..................... (B2) x4 11-5 11-6 3 Woofer (Main speaker) 1. Screw ..................... (C1) x8 11-6 (B1) x 1 Screwdriver Driver should be pried away from Speaker Box. (A1) x 1 Screwdriver Speaker Box Ass'y Driver should be pried away from Speaker Box. Figure 11-5 (B2) x 4 ø3 x 12mm Front Panel Speaker Box Ass'y Tweeter Figure 11-3 Speaker Box Ass'y Speaker Box Ass'y Woofer Woofer (A2) x 8 ø4 x 16mm (C1) x 4 ø4 x 16mm (C1) x 4 ø4 x 16mm Woofer Figure 11-6 Figure 11-4 – 11 – CD-M10000W/CP-M10000 REMOVING AND REINSTALLING THE MAIN PARTS TAPE 2 TAPE MECHANISM SECTION Clutch Ass'y Perform steps 1 to 7 and 10 of the disassembly method to remove the tape mechanism. Record/Playback Head How to remove the record/playback and erase heads (TAPE 2) (See Fig. 12-1) Erase Head 1. When you remove the screws (A1) x 2 pcs., the recording/ playback head and three-dimensional head of the erasing head can be removed. How to remove the playback head (TAPE 1) (See Fig. 12-2) (A1) x 2 Ø2 x 6mm 1. When you remove the screws (B1) x 2 pcs., the playback head can be removed. Figure 12-1 TAPE 1 Clutch Ass'y How to remove the pinch roller (TAPE 1/2) (See Fig. 12-3) Playback Head 1. Carefully bend the pinch roller pawl in the direction of the arrow , and remove the pinch roller (C1) x 1 pc., in the direction of the arrow . Note: When installing the pinch roller, pay attention to the spring mounting position. (B1) x 1 Ø2 x 9mm How to remove the belt (TAPE 2) (See Fig. 12-4) (B1) x 1 Ø2 x 5mm 1. Remove the main belt (D1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (D2) x 1 pc. Figure 12-2 How to remove the belt (TAPE 1) (See Fig. 12-4) 1. Remove the main belt (E1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (E2) x 1 pc. How to remove the motor (See Fig. 12-5) 1. Remove the screws (F1) x 2 pcs., to remove the motor. Tape Motor Pinch Roller (C1) x 1 Pull Pull Pinch Roller Pawl Figure 12-3 TAPE 2 Clutch Ass'y Tape Motor FF/REW Tape Roller Motor FF/REW Belt (D2) x 1 TAPE 2 Main Belt (D1) x 1 TAPE 1 Main Belt (E1) x 1 (F1) x 2 Ø2.6 x 5mm TAPE 1 Main Belt (D1) x 1 FF/REW Belt (E2) x 1 Flywheel Ass'y Main Belt (E1) x 1 Flywheel Ass'y Figure 12-5 Figure 12-4 – 12 – FF/REW Roller CD-M10000W/CP-M10000 CD MECHANISM SECTION Perform steps 1, 2, 3, 12, 13, 14 and 15 of the disassembly method to remove the CD mechanism. Slide Chassis How to remove the CD loading motor (See Fig. 13-1) CD Loading Motor CD Loading Motor PWB (A1) x 1 (A1) x 2 1. Bend the hooks (A1) x 5 pcs., to remove the CD loading motor. 2. Remove the drive belt (A2) x 1 pc. (A1) x 2 CD Loading Motor Pulley Drive Belt (A2) x 1 Figure 13-1 How to remove the pickup (See Fig. 13-2) Stop Washer (B3) x 2 (B1) x 1 ø2.6 x 6mm 1. Remove the stop washer (B1) x 1 pc., to remove the gear (B2) x 1 pc. 2. Remove the screws (B3) x 2 pcs., to remove the shaft (B4). 3. Remove the pickup. Note After removing the connector for the optical pickup from the connector wrap the conductive aluminium foil around the front end of connector so as to protect the optical pickup from electrostatic damage. Pickup Shaft (B4) x 1 CD Mechanism Gear (B2) x 1 Figure 13-2 ADJUSTMENT • Tape Speed MECHANISM SECTION • Driving Force Check Torque Meter Test Tape Adjusting Point Specified Value Instrument Connection MTT-111 Variable Resistor in motor. 3,000 ± 30 Hz Speaker terminal (Load resistance: 6 ohms) Specified Value Play: TW-2111 Normal speed Tape 1: Over 80 g Tape 2: Over 80 g • Torque Check Torque Meter Specified Value Tape 1 TAPE MECHANISM Tape 2 Play: TW-2111 30 to 80 g.cm 30 to 80 g.cm Fast forward: TW-2231 — 70 to 180 g.cm Rewind: TW-2231 — 70 to 180 g.cm Tape Motor Variable Resistor in motor Figure 13-3 – 13 – CD-M10000W/CP-M10000 • FM RF Signal generator: 1 kHz, 40 kHz dev., FM modulated TUNER SECTION fL: Low-range frequency fH: High-range frequency • AM IF/RF Signal generator: 400 Hz, 30%, AM modulated Test Stage Frequency Frequency Display Setting/ Instrument Adjusting Connection Parts AM IF 450 kHz 1,602 kHz T351 AM Band Coverage — 531 kHz (fL): T306 *2 1.1 ± 0.1 V 990 kHz (fL): T303 AM Tracking 990 kHz *1. Input: Antenna *2. Input: Antenna FM Band Coverage — FM RF 98.00 MHz 98.00 MHz (10-30 dB) *1 *1 CNP301 AM LOOP ANTENNA T303 C393 FM BAND COVERAGE fL 10.7 MHz 98 MHz MAIN PWB IC301 T302 L312 FM IF FM RF T301(fL): *1 3.4 V ± 50 mV L312 *2 Setting/ Adjusting Point Test Stage Frequency Frequency Display IF TP301 87.50 MHz Instrument Connection *1. Input: Antenna Output: TP301 *2. Input: Antenna Output: Speaker terminal • FM IF Signal generator: 10.7 MHz, FM modulated Output: TP302 Output: TP301 SO301 FM ANTENNA TERMINAL Setting/ Adjusting Point Test Stage Frequency Frequency Display AM TRACKING fL *1. Input: Antenna Instrument Connection T302 *1 (Turn the core of transformer T302 fully counterclock wise) Output: TP301 T306 T301 AM BAND COVERAGE fL T351 AM IF TP302 R357 Figure 14-1 ADJUSTMENT POINTS CD SECTION • Adjustment Since this CD system incorporates the following automatic adjustment functions, readjustment is not needed when replacing the pickup. Therefore, different PWBs and pickups can be combined freely. Each time a disc is changed, these adjustments are performed automatically. Therefore, playback of each disc can be performed under optimum conditions. T Stopped CH1=500 mV DC 10:1 T CH2=200 mV DC 10:1 CH3=1 V DC 10:1 1999/04/05 20:26:47 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 Items adjusted automatically (1) Offset adjustment (The offset voltage between the head amplifier output and the VREF reference voltage is compensated inside the IC.) * Focus offset adjustment * Tracking offset adjustment (2) Tracking balance adjustment (waveform drawing Fig. 14-2 EFBL) (3) Gain adjustment (The gain is compensated inside the IC so that the loop gain at the gain crossover frequency will be 0 dB.) * Focus gain adjustment * Tracking gain adjustment TE 3 EFBL 2 CH2 v/DIV 200 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2k Figure 14-2 – 14 – =Trigger= Mode : SINGLE Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs CD-M10000W/CP-M10000 TEST MODE • Setting the test mode Any one of test mode can be set by pressing several keys as follows. + + TEST:CD operation test Function:-CD test mode. -Enter test mode. C D T E S T IL isn't done OPEN/CLOSE operation is using manual. << >>, << >> buttons make pick's slide possible. <> key input. Do TOC IL. Do normal play When these following key is input into PLAY key, track number can be appoint directly <> key input Adjustment result automatically will display as below for each 2 sec : a) "FOF_XXXX" b) "TOF_XXXX" c) "TBA_XXXX" d) "TGA_XXXX" f) "FGA_XXXX" g) "RFL_XXXX" explanation: a) Focus off set b) Tracking off set c) Tracking balance d) Tracking Gain f) Focus Gain g) RF level shift ="FOF_XXXX" ="TOF_XXXX" ="TBA_XXXX" ="TGA_XXXX" ="FGA_XXXX" ="RFL_XXXX" <> key input. Laser ON. <> key input. Tracking OFF play at that specific point. <> key input. << << << 1>> key: Track 4 2>> key: Track 9 3>> key: Track 15 Tracking ON play from that specific point. <> key input. Adjustment result automatically will display as below for each 2 sec : a) "FOF_XXXX" b) "TOF_XXXX" c) "TBA_XXXX" d) "TGA_XXXX" f) "FGA_XXXX" g) "RFL_XXXX" <> key input. <> key input. STOP VOL — Last memory BAL — CENTER P.GEQ — FLAT X-BASS — OFF STOP Sliding the PICKUP with << >>, << >> button must only be in STOP mode. To cancel : Power OFF – 15 – CD-M10000W/CP-M10000 Standard Specification of Stereo System Error Message Display Contents Error Contents Display Output while Device Protection Operation 'PROTECT' Notes 00: While in Protect Circuit Operate 01: Over Current Detection 02: DC Detection 03: TAPE Mechanism Error 'ER-TA**' 00: Tape Mechanism Error 01: Initial Error 02: 03: CD/VCD Pickup Mechanism Error 'ER-CD**' 00: Pickup Mechanism Error 01: PU-IN SW Detection NG 02: 03: CD Changer Mechanism Error 'ER-CD**' 10: Changer Error 11: Initial Error 12: 13: Tray Error 'ER-CD**' 20: Tray Error 21: 22: 23: Micon Communication Error Focus Not Match IL Time Over TUN PLL Unlock 'ER-CD**' 30: System-VCD 31: System-CD Servo 'NO DISC' 'NOT READ' 'ER-TU**' 00: TUN Error 01: PLL Unlock 02: 03: – 16 – CD-M10000W/CP-M10000 SW3 SW2 DISC CLAMP NUMBER SW1 OPEN/ CLOSE TO MAIN SECTION M TO DISPLAY SECTION M3 CD LOADING CLAMP SW O/C, DISC NO 2 3 4 5 6 7 8 9 CNP8 2 3 4 5 6 BI4 1 2 3 4 5 6 CNS4 1 2 3 4 5 6 CNP4 1 2 17 25 FD CD RES 1 1 SLDO CL 6 DI 5 DO +5V (+B7 ) 4 CE +5V (+B7) 3 DRF DGND 2 WRQ AGND 1 L-CH CNP7 R-CH + - 70 71 75 69 57 63 DI 56 64 DO 55 65 VWRQ 51 50 66 VRES 40 67 DRF 37 IC1 LC78645NE CD SERVO 28 19 6 TO SPDO 22 FDO 21 49 XIN 42 41 39 38 SPO SLDO 23 48 XOUT 9 10 LDD 8 LDS TIN1 E 7 TIN2 F FIN2 B RVDD 41 46 FIN1 A 77 18 38 47 LVDD XVDD ADAVDD VDD VVDD RFVDD TDO 20 5 +3.3V (+B11) 35 CONT5 26 IC2 M63001FP FOCUS/TRACKING/ VCC2 SPIN/SLED VCC3 DRIVER 18 VCC1 40 VCC4 79 80 SW4 PICKUP IN +3.3V (+B11) +5V 24 (+B7) 23 28 ZD1 3.3V Q2 CONSTANT VOLTAGE 4 LASER DRIVER +3.3V (+B11) 5 6 7 15 16 Q1 +5V (+B7) TRACKING COIL FOCUS COIL M2 SLED MOTOR PICKUP UNIT XL1 33.8688 MHz CONT2 25 CONT3 RCHO 62 CL LVSS 61 CE RVSS LCHO 42 43 44 45 CONT4 Q3 Figure 17 BLOCK DIAGRAM (1/3) – 17 – M1 SPINDLE MOTOR M + M + - 26 27 29 22 21 14 8 CD-M10000W/CP-M10000 FM ANTENNA +B9 7 9 8 FM L312 RF IC302 LA1832S FM IF DET./ FM MPX./ AM IF T301 AM OSC IN FM OSC AM LOOP ANTENNA OSC BUFF Q302 CNP301 AM TRACKING AM BAND COVERAGE T306 T303 CE JK1 MIC X352 4.5 MHZ VT ICK1 M65856SP MIC AMP. 20 1 22 15 16 OSC LATCH 40 9 +B9 MIC IN L OUT 36 R OUT 35 12 13 8 +B9 7 FM/AM Q360 6 MCLKCONT 2 2 VACL 3 3 L-CH R-CH ICK2 KIA4558P OPE AMP. IC101 AN7345K PLAYBACK AND RECORD/PLAYBACK AMP. 3 L 21 Q121 Q122 MUTING 3 H/N 7 L REC 18 R –B5 MOTOR DRIVER T1/T2 19 10 ALC TAPE MECHANISM ASS'Y +B9 REC ZD701 6.2V IC703,IC704 1 KIA4558P OPE AMP. 7 28 30 IC701(2/2) IX0460AW 29 Q708 Q704 Q705 SOLENOID DRIVER 4 Q864 Q865 +B +B9 8 8 L NF 17 R NF 12 NOR/ CRO2 15 Q603 Q60 Q604 Q60 SYS MU 1 3 IC860 KIA4558P OPE AMP. 5 REF 14 BIAS Q128 OSC L104 7 18 8 17 L R L R MIC –20dB ATT 21 R 4 L Q862 Q863 20 POP REDUCE 6 T1/T2 +B9 IC601 LC75341 AUDIO PROCESSOR 4 L PB 21 R L NF 3 R NF 22 SWITCHING Q107 Q108 Q111 DI 1 CE 2 CLK 24 L 9 R 16 8 P.B L(T2) 2 R(T2) 23 SWITCHING +B9 +B9 13 L REC 9 REC R REC 16 ERASE HEAD 17 23 TAPE L 10 R 15 TUNER L 11 R 14 CD L 12 R 13 2 L(T1) 1 R(T1) 24 TAPE 2 L-CH R-CH RECORD PLAYBACK HEAD AC BIAS 6 JK601 VIDEO/AUX CNS11 R 1 REC P.B. Q103Q106 5 MO/ST FM/AM 1 L 7 R QK1 TAPE 1 L-CH PLAYBACK R-CH HEAD 4 5 R IN 32 FROM CD SERVO SECTION CNP7 9 10 CONSTANT VOLTAGE L IN 31 VCC 23 VRK1 MIC VOLUME +B FM 3 IC303 LC72131 PLL(TUNER) +B9 CLOCK 41 DATA 42 11 DO 2 1 CF351 450 kHz MO/ST T351 CF352 AM IF 1 2 4 5 9 8 17 13 AM IF GND VCC FM MPX AM IN DET VCO L 14 MIX OUT R 15 FM/AM OUT MPX IN 23 21 24 7 18 16 12 PHASE(FM/AM) 5 DI CL 4 3 FM OSC 2 X351 456 kHz STEREO B.P.F CF303 T302 AM RF IN 1 BF301 SO301 FM ANTENNA TERMINAL 6 ZD351 5.1V 10.7 MHz FM IF IC301 TA7358AP FM FRONT END +B8 T1/T2 SWITCHING Q109 Q110 +B9 SWITCHING BIAS Q124 Q126 +B9 +B9 Figure 18 BLOCK DIAGRAM (2/3) – 18 – BIAS CD-M10000W/CP-M10000 FL701 FL DISPLAY 6 ~ 13 1 2 3 14 ~ 16 33 ~ 44 23 ~ 32 JOG701 JOG VOLUME 56 57 58 +B7 Q701-Q703 LED722 TO CD SERVO SECTION +B7 53 52 49 48 46 45 78 79 VLOAD 80 39 38 37 - IC701(1/2) IX0460AW SYSTEM MICROCOMPUTER 89 AVDD 34 33 KEY SW701-SW703 SW709-SW717 SW722-SW734 +B7 IC702 BU2092F INPUT/OUTPUT EXPANDER 1 5 ~ 90 RX701 1 REMOTE SENSOR 3 +B7 2 41 VDD 57 CD CLAMP SW 61 67 31 9 10 11 12 15 16 17 CE CLK DI DO 20 21 22 23 24 IC702 Q709 +B7 RESET SPAN SELECTOR IC401 KIA4558P OPE AMP. 6 –20dB ATT 03 Q605 04 Q606 SYSTEM MUTE R 2 3 4 RL902 -1B 7 +B2 +B6 IC901 STK41217 POWER AMP. –B2 Q907 Q908 VF1 VF2 29 +3B D804 F806 T5A L 250V 9 R-OUT 11 L-OUT F801 T15A L 250V F807 T5A L 250V D803 T.F. VOLTAGE REGULATOR /T2 +B7 +B8 +B9 +5V +12V A+10V Q852 Q850 F808 T2A L 250V +B5 F809 T2A L 250V Q851 IAS –VF SO901 SPEAKER TERMINAL RL901 SW801 VOLTAGE SELECTOR 230-240V 220V 127V 110V +4B 7 M1 QFM M 906 M M2 FAN MOTOR DRIVER MAIN SPEAKER WOOFER F805 T6.3A L 250V -4B 1 6 VH+ VH14 18 VLVL+ 5 2 -3B 30 +B9 F803 T8A L 250V P901 IC902 STK41223 POWER AMP. 14 F802 T8A L 250V F804 T6.3A L 250V –B6 ZD401 15V D802 +B7 REC/PLAY 1(2/2) 60AW T801 MAIN POWER TRANSFORMER 9 R-OUT 11 L-OUT –B6 64 65 +B9 Q905 D801 +1B 1 6 VH+ VH14 7 R 1 L 18 VLVL+ 5 2 ZD402 15V L 5 3 +B7 +B8 Q911 Q912 8 9 2 +B7 18 JK670 HEADPHONES Q901 Q902 Q903 Q904 +B6 6 LED701-708 4 58 XL701 4.1943 MHz +B7 +B7 SP. DET. VDD RESET 1 2 4 5 6 7 - - VDD 93 100 - 92 ~ +B7 Q803 SWITCHING T802 SUB POWER TRANSFORMER Figure 19 BLOCK DIAGRAM (3/3) – 19 – AC POWER SUPPLY CORD AC 110/127/220/ 230-240 V, 50/60 Hz CD-M10000W/CP-M10000 A PICKUP UNIT CD SERVO PWB-C M PU-IN R11 10K C3 47/25 R13 1K 7 6 5 4 R14 FD 8 FO+ 9 FO– 21 20 19 18 17 16 15 14 13 12 11 10 TR+ MUTE 3 2 IC2 M63001FP FOCUS/TRACKING/ SPIN/SLED DRIVER – + SP+ 6 SP– 5 4 SL+ SL– 3 PUIN 2 1 GND CNP3 1 TR– 6 5 4 3 2 1 C39 100/10 SL– 6 5 4 3 2 1 CT2 0.001 1 2 3 TP3 R12 4 330 C8 5 0.0047 6 7 TP1 C50 8 22P TP2 9 (CH) 10 C10 11 10/50 C9 12 100/10 13 C11 0.22/50 14 15 4 16 C12 17 100P 18 19 20 GND 6 5 4 3 2 1 C6 0.1 2 SL+ + SPIN – + SLED – C5 0.047(ML) R10 27K R65 3.3 + – SW4 PICKUP IN M C38 0.01 – + M1 SPINDLE MOTOR M2 SLED MOTOR CNS3A CD MOTOR PWB-G CNS3B E CNP3A GND 1 TR– 2 TR+ FO+ 3 4 FO– 5 GND 6 PD VR 7 LD 8 CNP2 STANDBY VCC1 R44 12K SLDO 1 2 3 4 5 6 7 8 VREF TR– 1 2 3 4 5 6 7 8 CT1 0.001 C40 220/6.3 FO+ FO– D CNS2A TR– 1 TR+ 2 FO+ 3 FO– 4 5 PD 6 VR 7 LD 8 TR+ CNS2B C1 47/25 C R3 33K C49 47/25 CNP1 LASER DRIVER C4 0.001 C R6 33K R5 12K R9 3.3 VCC VREF E A B R4 F 12K Q1 KTA1266 GR 7 6 5 4 3 2 1 R2 12K 7 6 5 4 3 2 1 C2 0.01 7 6 5 4 3 2 1 R7 47 R1 12K 7 6 5 4 3 2 1 CNS1A VCC VREF E A B F C B CNS1B CD SIGNAL F – + – + + – + – + – C41 100/10 G H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 20 SCHEMATIC DIAGRAM (1/10) – 20 – 5 6 VCC4 M+ M– SP– VCC3 SP+ SPO VCC2 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 L CD-M10000W/CP-M10000 3 C34 100P C32 100P R38 R37 R36 R35 R34 R33 R32 C30 100P 2 R31 1K CONT2 CONT3 VSS VDD5 DRF VRES VWRQ DO DI CL CE LDD LDS FR VVDD PCKIST VVSS PDO2 PDO1 SBCK/FG DEFECT V/1P FSEQ MON11 MON12 MON13 MON14 MON15 VSS VDD DOUT TEST 11 R28 2.2K 60 DATA 59 DATACK 58 10 57 56 55 54 XL1 53 33.8688 MHz 52 51 50 R43 49 220 48 47 R22 46 100 45 ZD1 DZ3.3BSB 44 C24 43 C16 10/50 42 330/6.3 R25 41 2.2K C23 C44 C26 0.001 10/50 0.0015 R24 R27 2.2K 10K C25 0.0015 C14 100/10 C13 0.022 R18 1K 1 12 C51 0.022 C42 0.01 R-CH AGND L-CH DGND +5V 1 2 3 4 5 +5V 6 CNS11 FROM MAIN PWB P23 12-C C48 0.022 Q2 KTC3203 Y R47 100 R80 3.3 (1/4W) Fusible C18 100/10 R45 470 D1 DS1SS133 D2 DS1SS133 CNS703 FROM DISPLAY PWB P25 10-A CNP7 R26 10K 9 R46 470 1 2 3 4 5 6 7 8 9 CNP8 CONSTANT VOLTAGE 3 R20 10K TO R14 1K R15 1K R16 1K R17 1K 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 FD FO+ 4 RF 5 RFVDD RSVSS FIN1 A FIN2 B TIN1 E TIN2 F VREF REF1 FE TEC TE RFMON JITTC LRSY ASDFIN 8 ASDACK 7 ASLRCK 1 SLCO IGMOUT 2 SLCIST EFLG 3 EFMIN IC1 C2F XVSS LC78645NE FSX/16MIN CD SERVO XIN XOUT ADAVDD 18 43 LVSS XVDD 19 ADAVSS RVDD 42 LCHO 20 TDO RCHO 6 41 LVDD RVSS FDO SPDO SLDO GPDAC CONT4 CONT5 R13 1K 2 1 R29 2.2K 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 1 2 3 4 C8 5 047 6 7 TP1 8 9 10 C10 11 10/50 12 13 C11 0.22/50 14 15 4 16 17 P 18 19 20 WRQ DRF CE DO DI CL CD RES CLAMP SW O/C, DISC NO L1 0.82µH R11 10K C5 47(ML) R41 12K C37 0.1 R40 680 C36 2.2/50 C35 R39 0.047 680 (ML) R42 1.2K C28 100P C27 0.022 1K 1K 1K 1K 1K 1K 1K R23 220 C33 100P ZD2 DZ3.9BSB 1 R30 8.2K Q3 KRC102 M 39 40 41 42 LD_M+ LD_M– R19 15K VCC4 M+ BI4 2 3 R49 1 CNP4 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 CNS4 SW1 OPEN/CLOSE SW2 CLAMP SW3 DISC NUMBER + M M3 – CD LOADING MOTOR CD LOADING MOTOR PWB-E • The numbers 1 to 12 are waveform numbers shown in page 40. 7 8 9 10 Figure 21 SCHEMATIC DIAGRAM (2/10) – 21 – 11 12 CD-M10000W/CP-M10000 +B 1 DI 5 R611 5.6K C617 2.2/50 6 6 T2_L1 T2_L2 BI102 Q105 C105 180P 0V 2SC1845 F 0.7V 0V R105 3.3K 0.7V 0V R103 2.2K Q103 2SC1845 F 0V 1 0V 2 + – R874 100K C863 22/50 R875 100K C864 22/50 R868 12K 3 R171 1K C115 100/25 Q103~Q108: SWITCHING 7 16 – + 56K Hich=CHROME 56K + – 8 9 C145 22/50 C146 220/10 R146 10K C142 47/25 C132 270P R138 6.8K 6 R140 1.5K R142 100 C136 0.022 C140 0.0033 R134 68K 5 17 15 14 10 11 12 C127 0.022 R137 6.8K C117 C119 C121 0.033 560P 1/50 R131 12K C141 47/25 R145 10K R111 15K G 13 C133 22/25 R173 R121 100K 1K R119 56 R136 4.7K R126 5.6K 4 C113 330P R117 1K L 0V R124 3.9K – R169 1K C111 330P 18 IC101 AN7345K Q124 SWITCHING 2SA1015 GR 11.7V 6 T2_R1 0V 19 R167 47K 5 Q106 2SC1845 F 20 Q12 R166 22K 5 A_GND 21 – + 112K Hich=T1 + 112K R15 220 C154 0.047 5 0V T2_R2 22 R158 220 Vcc 4 23 C134 22/25 GND 3 4 C122 1/50 C114 330P ALC RIPPLE 3 4 C865 47/25 0V Q121 0V KTC3199 GR ALC Nor/CrO2 3 R170 24 1K R122 100K Q122 KTC3199 GR R141 100 0.7V R118 1K C112 330P R153 10K 0.7V R154 10K C135 0.022 C139 0.0033 ERASE 0V C131 270P R139 1.5K 2 0.7V C118 C120 0.033 560P R120 56 C116 100/25 0V C107 560P 2 0V 0V R125 5.6K C123 0.0022 M_GND R108 47K R Q111 KRC104 M L R104 2.2K R106 3.3K C153 100/16 C108 560P C106 180P 2 REC_R R156 220K 3.4V Q104 0V 2SC1845 F 0.7V R867 100K 6 8 3 +B 3 R101 1K C101 560P 3 1 R Q108 KTC3199 GR 3 0V 0V Q109 KTA1266 GR R878 22K R123 3.9K 9.3V 2 0V 2 T1_L 7 TAPE 2 RECORD/ PLAYBACK HEAD R112 15K 1 5 3.4V 2 R110 4.7K A_GND 3 R155 150 Q107 KTC3199 GR L-CH R114 R115 10K 4.7K 8.6V R109 4.7K 2 Q110 KRC104 M R102 1K CNS102 R-CH R113 10K R107 47K 1 CNP101 T1_R ERASE HEAD F 9.3V C102 560P 1 0.001(ML) 0V M_GND(TAPE) R-CH Q109~Q111: SWITCHING 4 C859 D863 DS1SS133 R174 1K D_GND 7 D861 DS1SS133 D862 DS1SS133 R879 22K C124 0.0022 R132 12K A_GND (CD) C866 0.001 IC860 KIA4558P OPE AMP. C867 1/50 Q863 KTC3199 GR R853 22K VOLTAGE REGULATOR Q852 KIA7805AP 1 3 R854 2 10K Q862 KTC3199 GR ZD851 DZ3.9BSB R172 1K C860 2200/35 R866 330 R880 10K R873 1K C128 3.3/50 VOLTAGE C856 REGULATOR 100P Q851 KIA7810AP 1 3 2 C855 0.1(ML) C852 0.047(ML) R852 22K A_+10V R856 330 C850 2200/35 A_GND (A_PRO) Q850 VOLTAGE KTC2026 REGULATOR +B R855 3.3 +B +B GND E R870 2.2K LVL-CTRL R871 10K Q864 KRC102 M 3 2 1 R869 12K Q865 KTC3199 GR +B A_GND(MIC) 2 C630 1/50 C899 10/50 SW+5V BASE CHASSIS 1 13 R624 4.7K RL GND 1 R1 CD R135 4.7K R620 22K LG1 1 14 C62 1/5 C628 1/50 R619 22K C618 22/50 A_GND (MUTE) –B BI13 TAPE 1 PLAYBACK HEAD 15 L1 SP_DET 13 L-CH 16 R2 TUNER C620 1/50 C622 10/50 C624 1/50 17 R3 DECK 11 C629 1/50 RTRE 18 – + +B CNS13 D R4 L2 SP_RLY 12 TO POWER PWB P26 5-G RSEL0 AUX 10 M_GND(MTR) 11 2 LSEL0 L4 12 C642 0.0033 R616 2.2K RIN IC601 C6 0. – + –15V 9 10 2 R617 10K 19 LTRE LIN L3 C627 1/50 C616 0.001 9 C610 0.22 RBASS 20 –20dBATT S_MUTE CD+B M_+12V 8 1 C625 1/50 C615 0.001 R614 390 8 C623 1/50 R615 2.2K 21 GND(REG) 7 1 R613 390 ROUT C602 22/25 22 +B 6 CNP902 Q603 Q604 KTC3199 GR KTC3199 GR C636 0.001 R622 Q606 2.2K KTC3199 GR LVL-CTRL 4 R612 5.6K R-CH 3 C R610 330 R609 330 A_GND 2 FROM AMP. PWB P26 1-G C635 0.001 CNS901 L-CH 1 CNP901 R621 2.2K 7 INTERFACE LOUT + – B R607 10K VREF + – + – R605 3.9K C611 C619 0.0015 1/50 C621 10/50 4 C609 0.22 5 LBASS 6 24 VDD 23 + – Q605 KTC3199 GR Q605,Q606: SYSTEM MUTE CCB 3 VSS C607 0.22 C613 10/50 CLK CE + – 2 + – C606 100/16 + – IC601 LC75341 AUDIO PROCESSOR A 0.03 IC101: PLAYBACK AND RECORD/PLAYBACK AMP. H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 22 SCHEMATIC DIAGRAM (3/10) – 22 – 5 6 CD-M10000W/CP-M10000 CLK 24 VDD 23 VREF ROUT C602 22/25 22 C614 R608 10/50 10K R606 C608 3.9K 0.22 21 C610 0.22 20 RBASS 19 RIN RSEL0 R4 RTRE C622 10/50 C624 1/50 17 16 R3 15 R2 14 R633 39K C612 0.0015 C620 1/50 18 MAIN PWB-A (1/2) FM SIGNAL PLAYBACK SIGNAL RECORD SIGNAL CD SIGNAL VIDEO SIGNAL MIC SIGNAL +B C626 1/50 C628 1/50 R631 8.2K C631 390P R632 8.2K C632 390P L-CH JK601 VIDEO/AUX R634 39K R-CH CHASSIS C641 0.0033 R618 4.7K R1 13 BI11 R623 4.7K C630 1/50 –20dBATT S_MUTE R-CH A_GND 1 1 2 2 L-CH CD_GND 3 3 4 4 5 5 +B M_+5V A_+5V D864 DS1N404S TUN_R GND(A_GND) –B R866 330 C866 0.001 – + 1 D862 DS1SS133 8 3 CLK CD_GND 4 R873 1K DI 6 2 100K C863 22/50 R875 100K C861 0.022 R867 100K CNS11 7 8 9 5 CE +B R865 100 – + 7 61 1SS133 5 6 6 DO R625 1K R626 1K R627 1K IC860 KIA4558P PE AMP. TUN_L R861 68K 80 K D_GND A_+10V +B –B TO TUNER SECTION P28 1-G 2 3 4 6 1 –B SW601 SPAN SELECTOR R863 33K C865 47/25 CNP7 TO CD SERVO PWB P21 12-C +B 50 kHz/9 kHz 100 kHz/10 kHz +B CNS602 REC_R IN(L) R638 470K OUT(L) REC_L GND(A) R153 10K 0.7V Q121 0V KTC3199 GR +10 V(A) +B 0V R157 220K IN(R) R637 470K OUT(R) DATA Q121,Q122: MUTING CLK 1 2 2 3 3 4 4 5 5 CNPK1 6 6 7 7 TO MIC PWB P29 12-C 8 8 9 9 10 10 BI602 BIAS 0V CNP601 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 A_+10V KO LATCH MIC IN SPAN SP_RLY SP_DET SW+5V –20dB ATT –15V M+12V A_GND REC/PLAY T_T1 T2 T_BIAS D_GND C152 47/25 SPA_SIG Q128 KTC3203 Y L104 330µH R167 47K C151 0.039(ML) BIAS OSC R168 4.7 0V C150 0.0082 (P.P.) C154 0.047 R166 22K R145 10K 0V 0V Q126 KRC104 M S_MUTE 3 11.6V C141 7/25 C605 4.7/50 1 0V 2 DO R160 82 R164 4.7K DI 12 CLK 11 CE 10 R162 47K 11.6V 13 +B 0V 14 GND 15 Vcc R158 220 Q124 SWITCHING 2SA1015 GR 11.7V +B ALC RIPPLE C145 22/50 C146 220/10 MIC IN ALC Nor/CrO2 47/25 R146 10K LATCH 1 20 21 21 1 FC701 CNP701 7 8 9 TO DISPLAY PWB P25 12-D 10 Figure 23 SCHEMATIC DIAGRAM (4/10) – 23 – 11 12 CD-M10000W/CP-M10000 DISPLAY PWB-B1 A P03 P01 G11 24 23 16 81 82 83 84 85 86 87 88 89 90 P3 P2 R716 100K Q703 KTC3199 GR C714 47/50 80 P10 R724 33 R719 1K R705 1K G11 C715 22/50 P1 Q702 KTC3199 GR R702 1K P02 P04 25 P06 26 P07 P05 36 35 34 33 32 P08 28 27 P09 29 P10 P11 P12 P13 31 30 P4 38 37 P14 P15 P16 P17 P18 40 39 P5 41 P6 42 P19 P20 P21 P22 43 P9 Q701 KTC3199 GR 44 P7 B R704 100K 57 56 P8 R701 100K F 58 F F FL701 FL DISPLAY 79 VLOAD 78 P11 77 P12 76 P13 75 P14 74 P15 73 P16 C 72 P17 DT701 DS1SS133 71 P18 70 P19/DIST0 R794 1K IX0 SY MICRO 69 P20/DIST1 68 P21/DIST2 DT703 DS1SS133 67 P22/DIST3 66 NO USE 65 HSS_DO 64 HSS_DI 63 HSS_STB 62 HSS_ACK 61 NO USE/MPEG_POW D 60 NO USE R793 10K R743 1K R744 1K R745 1K 56 FPB (R-REC) 55 FPA (F-REC) 2.2/50 100K CS710 RS713 IC703 KIA4558P OPE AMP. 0.022 T_SOL B SMUTE R758 1K T_SOL A 470 R756 T_MOTOR 470 41 R755 TIMER LED 42 2.2K 43 R754 44 1.8K 45 +B R717 10K R714 10K R718 10K R720 10K R749 10K R746 10K R721 4.7K 7 ZD701 MTZJ6.2C 6 R713 10K CS708 8 270 1 5 0.022 4 3 CS713 0.022 RS720 180K F 2 RS708 RS719 15K 46 R725 10K RS716 1M RS714 2.2M CS705 0.022 RS709 150K 47 D704 DS1SS133 CS709 RS717 470K CS712 0.0068 48 R753 50 VDD 51 D701 DS1SS133 CS711 0.0068 RS718 56K 49 T1 RUN 52 RS711 100K SP_RLY 53 CD CLAMP SW D703 DS1SS133 CS706 2.2/50 51 T2 RUN 54 PLAY SW_B LED722 CS704 0.0027 1K SP_DET 7 +B 1K R742 1K 6 RS715 100K CS707 2.2/50 R741 58 LCK 0 57 MIC SW 1K 8 1K R751 5 R739 1K RS705 12K CS703 0.0027 1K 1K R748 E 1 RS706 220K RS707 390K RS703 68K 3 -B D702 DS1SS133 4 2 RS704 220K RS701 33K RS710 270 RS712 820K CS702 270P R740 R738 R747 CS701 270P RS702 10K 59 DISTOUT/SW OUT R792 10K +B IC704 KIA4558P OPE AMP. +B -B -B +B TAPE MECHANISM PWB-F Q704,Q705: SOLENOID DRIVER 0V CASSETTE SOLENOID G F. PLAY SOLENOID + TAPE MOTOR M - CNP702 PH FC702 N.C. 10 10 9 8 8 7 7 6 6 5 5 4 4 3 3 2 PLAY 10 9 2 1 1 1 10V R737 10K Q705 KTA1273 Y N.C. C 0 R_REC 10V T1 RUN R736 10K Q704 KTA1273 Y F_REC SOLA SOLB R752 10K +MTR Q708 KTA1273 Y MOTOR DRIVER T2 RUN GND +B 10V C719 47/25 D712 DS1SS133 D713 DS1SS133 T2 PLAY H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 24 SCHEMATIC DIAGRAM (5/10) – 24 – 5 6 CD-M10000W/CP-M10000 TO CD SERVO PWB P21 12-B G10 G9 G8 1 3 T-BIAS 4 T-T1/T2 5 REC/PLAY R773 2 DSA_STB R775 6 7 DRF 8 WRQ 9 9 1 2 3 4 5 6 7 8 9 CNS703 C725 0.022 CNS705 VF1 -VF R776 RES OUT 1K 7 8 RESET 10 1K VF2 1K P_IN R777 1K R778 1K R779 1K R780 1K R781 1K X2 11 X1 12 XL701 4.1943 MHz A_+10 V C723 15P MIC_IN SPAN SP_RLY XT2 14 SPN 15 R782 SP DET 1K SW +5 V VDD 16 CD CLK 17 CD DI 18 CD DO 19 CD CE 20 CE 21 CLK 22 DI 23 R783 1K R784 1K R785 1K R786 1K R787 1K R788 1K R789 1K R790 1K -20dB ATT A_GND SPA_SIG DSA_ACK 27 R771 1K R772 1K R769 1K R708 10K LED701 LED702 10K 10K R706 1K 1K 31 R768 R766 32 R767 33 R700 10K PLAY RL702 1K 4204UYT7 R703 SPEANA0 30 RL701 1K 4204UYT7 STOP REW_PLAY LED705 RL705 1K Q11 16 4 LCK Q10 15 T_T1 T2 47/25 T_BIAS D_GND C702 OE 17 3 CLOCK REC/PLAY +B VDD 18 2 DATA C727 470P SPEANA1 29 1K 34 1K 1 VSS SPEANA2 28 AVDD AVREF P-IN 35 1K JOG 0 JOG 1 36 R762 1K 37 R761 REMOCON 1K 1K R759 38 R760 SMUTE VSS 39 40 1K T_SOL A T_SOL B 41 R758 470 470 42 R756 43 R755 T_MOTOR TIMER LED 2.2K 1.8K R753 44 R754 45 KEY 2 31 KEY 1 32 KEY 0 33 1K R770 S_MUTE IC702 BU2092F INPUT/OUTPUT EXPANDER C701 R791 M_+12 V +B AVSS 25 DSA_DATA 26 -15 V -B DO 24 51 T2 RUN 3 2 2 1 1 FC701 21 CNP701 +B C724 18P XVPP/IC 13 4 3 BI705 KARAOKE LATCH IC701 IX0460AW SYSTEM MICROCOMPUTER 4 0.022 DO DI LED706-708: 4204UGT7 RL704 1K Q9 14 5 Q0 8 Q3 Q8 13 RL703 RL708 Q7 12 RL707 Q6 11 9 Q4 Q5 10 RL706 6 Q1 7 Q2 CLK CE 1K 1K LED708 1K LED707 1K 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 CNP704 3 3 3 2 2 2 1 1 LED706 4204UYT7 +B +B TO MAIN PWB P23 10-H G11 VDD -20dBATT 6 CNP903 P1 98 5 TO POWER PWB P26 5-G P2 97 4 CNP601 P3 96 3 O/C SW DISC NO SW P4 99 100 95 G1 93 94 G2 92 G3 91 G5 90 G4 89 G6 88 G7 87 2 BI703 C726 220/10 86 1 DRF 1 WRQ(DSP) 2 CD DI 3 CD CE F 6 CD DO F 7 CD CLK F 8 RES OUT G01 9 CLAMP SW G02 10 G03 12 11 G04 G05 14 13 G06 15 G07 16 G08 G10 24 23 G09 G11 25 P01 P03 26 P02 P04 CNP8 1 +B LED704 31URT21 LED703 31URT21 BI704 CNS704 LED PWB-B3 +B 5 V BACK UP +B D721 DS1SS133 +B +B 3 -B +B D718 DS1SS133 1 C728 0.01 +B +B JOG701 JOG VOLUME B C720 0.001 +B RD25 680 RD26 820 SW722 CD SW723 TAPE RD13 680 RD14 820 RD27 1K RD28 1.5K RD29 2.2K RD30 2.7K RD31 3.9K SW725 MEMORY SET SW726 FAST REWIND SW727 FAST FORWARD SW728 PLAY RD32 5.6K RD33 10K 1 2 3 RD34 15K RD35 33K D722 DS1SS133 2 RX701 REMOTE SENSOR C729 3.3/50 R799 100 Q709 KRC102 M RESET C733 47/25 R796 47K C732 0.022 R795 10K D720 DS1SS133 +B R763 10K R764 10K R765 10K R797 100K R757 10K +B D723 DS1SS133 R721 4.7K +B RD36 100K A C721 0.001 SW724 TUNING DOWN SW729 STOP SW730 REVERSE PLAY SW731 RECORD/ PAUSE SW732 TUNING UP SW733 VIDEO SW734 TUNER RD15 180K +B SW714 DIMMER RD01 680 SW701 ON/ STAND-BY 7 8 SW715 SW716 MONSTER EQUALIZER BASS RD02 820 SW702 CLOCK RD03 1K SW717 REVERSE MODE RD04 1.5K RD05 2.2K RD06 2.7K RD07 3.9K RD08 5.6K RD09 10K SW703 TIMER 9 SW709 DISC 1 RD10 18K SW710 DISC 2 10 Figure 25 SCHEMATIC DIAGRAM (6/10) – 25 – RD11 33K SW711 DISC 3 11 RD12 100K SW712 DISC SKIP SW713 OPEN/CLOSE 12 IC901 STK41217 POWER AMP. + – + R933 3.9K C909 0.22 R924 R943 10 (1/2W) 10(1/2W) C998 47/50 R938 10(1/2W) C906 0.22 C907 0.22 R939 10(1/2W) D919 DS1SS133 R955 10(1/2W) L904 3µH +B +B C915 R940 56K R957 R941 10 56K (1/2W) R942 10(1/2W) R999 56K C997 0.1/50 C999 0.22 Q907 KRA107 M C918 0.22 R958 10 (1/2W) R959 10 (1/2W) R900 10 (1/2W) R956 56K C917 0.22 3 D908 DS1SS133 2 1 C932 0.22 R945 12K C912 820P C913 47P R903 56K C916 4.7/25 R908 560 R944 33K C905 0.1/50 R946 10K +B -B R976 1K P901 R936 10(1/2W) R935 10(1/2W) C914 47P L903 3µH C908 0.22 R907 560 C995 100/50 R934 3.9K R998 56K Q911 KTC3199 GR R-CH ZD904 DZ15BSB C993 100/50 +B VH+ ZD903 DZ15BSB +B C911 820P 4.7/25 R975 1K R991 100 (1/4W) Fusible R912 100 (1/4W)Fusible 18 17 16 15 14 13 R904 56K C919 100/100 VH+ 1 R902 1K C920 100/100 VL+ 2 R988 0.1(5W) R989 0.1(5W) R990 0.1(5W) C986 820P R982 1K R986 100 (1/4W) Fusible R987 0.1(5W) 3 R901 1K R91 100(1/ Fusib L-CH B 4 Q908 KTC3199 GR R985 1K 5 Q912 KTC3199 GR R909 560 6 C991 100/100 C990 100/100 R984 33K C988 0.1/50 7 SP DET C985 47/50 8 C992 100/100 R981 1K C987 47P R910 56K C984 47/50 R906 560 C983 47P R905 1K R983 56K C989 100/100 C982 820P 9 VL– + – 22 21 20 19 18 17 16 15 14 13 12 11 10 – + – A VH– CD-M10000W/CP-M10000 -B R405 C435 0.15(ML) 8.2K R-CH R402 18K R407 4.7K C436 0.18 R408 8.2K 3 C437 100P (CH) R-CH 5 6 R409 560 C438 10/50 L-CH D 2 – + + – VL– 1 R411 C443 1K 2.2/50 R412 C442 1K 2.2/50 7 R413 68K C440 47/50 R410 4 560 C439 10/50 ZD401 C441 MTZJ15C 0.022 R417 100K C448 0.1(ML) R419 68K C450 220P(CH) R418 100K C449 R420 0.1(ML) 68K C451 220P(CH) C446 0.1 (ML) VH– C978 3300/100 R948 22K VL– VH+ D914 DS1N404S R-CH C447 0.1(ML) C979 3300/100 D915 DS1N404S R947 22K(1/2W) R974 22K(1/2W) R980 C904 22K C903 4700/35 4700/35 VL+ C901 3300/71 VH+ VH– R416 820(2W) C902 3300/71 D902 DS1N404S R978 22K R979 22K (1/2W) D901 DS1N404S C433 0.15(ML) C980 4700/50 C981 4700/50 C434 100P(CH) R401 L-CH 18K VL+ R937 22K 8 R414 68K R404 4.7K C444 47/25 C445 0.022 R415 820(2W) IC401 KIA4558P OPE AMP. C432 0.18 ZD402 MTZJ15C L-CH C R977 22K (1/2W) +B +B +B +B R949 470K D913 DS1SS133 R950 1K BI905 +B E +B -B VH– +B VH+ +B BI906 -B +B -B +B L-CH A_GND R-CH LVL_CTRL +B GND CD+B M_+12V –15V M_GND SP_RLY SP_DET +5V 1 2 3 4 5 6 7 8 9 10 11 12 13 7 6 5 4 3 2 1 VH+ 7 6 5 4 GND 3 VL+ 2 1 VL– CNP906 CNS906 VL– 1 VL+ 2 GND 3 VH– -B F CNP905 CNS905 7 6 5 4 GND 3 VL+ 2 VL– 1 1 2 3 4 5 6 7 4 5 6 7 VL– 1 2 VL+ GND 3 4 5 6 7 V V CNP901 CNS901 CNP902 FROM MAIN PWB P22 1-D G +B GND 1 2 CNS13 FROM MAIN PWB P22 1-D P_I V 1 2 3 4 CNS705 CNP903 FROM DISPLAY PWB P25 12-C H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 26 SCHEMATIC DIAGRAM (7/10) – 26 – 5 6 –V VF1 VH+ 3 VL+ 4 2 1 +B Q901 KTC3199 GR R952 3.9K R929 56K R927 10(1/2W) C925 47/50 D903 DS1SS133 D904 DS1SS133 R928 10(1/2W) R926 10(1/2W) L902 R923 56K R954 R953 10(1/2W) 10(1/2W) Q902 KTC3199 GR R922 1.8K C957 100/100 C920 100/100 R902 1K R951 3.9K D905 DS1SS133 Q904 KTC3199 GR C921 100/50 ZD901 DZ12BSB 0.022(ML) R920 1.5K ZD902 DZ12BSB C922 100/50 C956 100/100 R904 56K C919 100/100 R918 0.1(3W) C924 Q903 R925 KTC3199 GR 10(1/2W) R930 56K 3µH C927 0.22 SO901 SPEAKER TERMINAL C929 0.22 R931 10(1/2W) R932 10(1/2W) C930 0.22 C928 0.22 R921 1.8K R911 100(1/4W) Fusible GND R-CH (WOOFER) GND – R901 1K L-CH (MAIN SPEAKER) GND L-CH (WOOFER) + R-CH +B VH+ L901 3µH R944 33K C905 0.1/50 FM SIGNAL R916 0.22(3W) R913 0.22(3W) C912 820P R912 100 (1/4W)Fusible R976 1K 5 – C914 47P 6 – R908 560 7 + R903 56K C916 4.7/25 8 – C913 47P 9 + C911 820P VL– + – 18 17 16 15 14 13 12 11 10 75 K AMP. PWB-D2 IC902 STK41223 POWER AMP. + + – VH– CD-M10000W/CP-M10000 R-CH (MAIN SPEAKER) GND R919 C923 0.022(ML) 1.5K L R917 0.1(3W) R RL901 R961 1.2 (2W) -B D906 Q905 DS1SS133 KTC3199 GR R962 1K R963 10K R964 560 (2W) 1 2 3 4 5 6 CHASSIS GND 1 2 1 2 + 1 2 + – M904 FAN MOTOR M BI908B R965 560 (2W) R969 1K R968 1K QFM906 DFM907 DS1SS133 KTC3203 Y DFM920 DS1SS133 RFM937 15K – M M903 FAN MOTOR RFM939 1K CFM943 47/50 RFM938 68K DFM921 DS1SS133 +B 1 2 FAN MOTOR DRIVER CFM947 10/50 CNP904 CNS904 R960 1.2 (2W) -B 1 2 3 4 5 6 RL902 LG901 R967 1K CNP907 CNS907 R966 1K BI908A +B HEADPHONES PWB-B2 FW901 POWER PWB-D1 +B CNP905 CNS905 7 6 5 4 GND 3 VL+ 2 VL– 1 VH– D801 D10XB60F VH+ -B D802 D10XB60F F806 T5A L 250V D803 D10XB60F C813 0.22 C814 0.22 D804 D10XB60F C816 0.22(ML) C815 0.22(ML) -B 3 4 5 6 7 F807 T5A L 250V VH– T.F. VH+ -B 110V 127V 220V 230-240V +B SW801 VOLTAGE SELECTOR F808 T2A L 250V D805 DS1N404S +B R807 47K ZD804 DZ6.2BSA C817 0.22 F801 T15A L 250V C819 22/50 C818 0.22 CNP902 D806 DS1N404S F809 T2A L 250V D809 DS1N404S P_IN VF2 R806 220K R803 12K C823 47/50 +B GND 1 2 C824 100/35 1 2 3 4 5 6 7 1 2 3 4 CNP903 BI906 1 2 3 4 5 6 7 JK670 HEADPHONES F803 T8A L 250V F805 T6.3A L 250V +B VL– 1 VL+ 2 GND 5 C811 0.22 C812 0.22 CNP906 CNS906 FW901A 1 2 R 3 4 L 5 CNP705 F802 T8A L 250V F804 T6.3A L 250V +B 1 TRANSFORMER PWB-D3 T801 MAIN POWER TRANSFORMER C809 0.22(ML) C810 0.22(ML) -B HP_RLY M_+12V HP_R-CH HP_GND HP_L-CH –VF VF1 7 R810 47 C822 47/50 R819 47K R805 10 ZD802 DZ6.2BSA ZD801 DZ30BSB R802 1K C821 220/63 D810 DS1N404S 1 2 3 4 5 T802 SUB POWER TRANSFORMER LG802 AC POWER SUPPLY CORD AC 110/127/220/ 230-240 V, 50/60 Hz LG801 CNS802 7 6 5 4 3 2 1 CNS801 7 6 5 4 3 2 1 CNP801 BI905 +B 1 2 3 4 5 1 2 1 2 CNP802 Q803 KTA1274 Y SWITCHING R811 47 8 9 10 Figure 27 SCHEMATIC DIAGRAM (8/10) – 27 – 11 12 CD-M10000W/CP-M10000 AM LOOP ANTENNA SO301 FM ANTENNA TERMINAL 2 1 2 1 CNP301 R311 R314 22 C309 0.001 100K VD302 KDV147B R313 33K C317 0.001 C305 4.7P (CH) C310 15P (CH) 2 IC301 TA7358AP 3 FM FRONT END 1 4 C323 0.022 5 +B 6 B C312 0.022 +B R322 680 Q302 KTC3194 Y 7 T301 FM OSC. R325 47K OSC BUFF T302 C324 8.2P(UJ) FM IF C318 100P CF303 FM SIGNAL R316 4.7K AM SIGNAL C335 560P C334 22P (UJ) C307 10/16 T303 R323 68K C313 22P R309 (CH) 10K 3 C 9 C306 0.022 VD303 KDV147B 1 2 AM BAND COVERAGE fL 8 C311 R302 10 18P AM OSC. T306 R327 33 C330 15P(UJ) VD301 SVC348S +B C332 0.022 C331 0.047 R336 10K TP301 AM TRACKING C315 0.0047 C316 0.022 C303 10P(CH) C304 0.01 0.001 FM RF DS1SS133 4.7P(CH) L312 C338 C308 1 2 BF301 B.P.F. 3 AM ANT. DS1SS133 DS1SS133 +B D305 D301 C314 0.0047 D302 MAIN PWB-A (2/2) A +B +B +B C382 15P (CH) R375 470 C381 12P (CH) R374 1K R373 1K R372 1K R378 1K C397 0.022 4 DI 5 CL 6 DO R381 10K R380 1.5K AIN 19 PD 18 R368 22K C351 0.022 C352 10/16 C350 0.022 AM IF 0.022 1 2 L351 100µH CF352 R377 47K R393 1K 0.022 C354 0.022 +B 3 4 0.022 C395 2 C363 0.022 C364 C365 2.2/50 0.022 C366 0.001 R350 2.7K R353 270 C356 0.001 C357 2.2/50 R355 3.3K MPX VCO 17 9 VCC 10 IF OUT 11 PHASE X351 456 kHz C368 1/50 TP302 MPX IN 16 R356 1K C369 27P(UJ) R-CH OUT 15 C374 L-CH OUT 14 12 PHASE MO/ST 13 C358 (FM/AM) 1/50 R357 470K 0.018 C373 0.018 C372 1/50 R362 3.3K C371 1/50 R361 3.3K R364 6.8K +B CE DI C396 TO MAIN SECTION P23 12-C 1 R391 270 R383 5.6K +B 0.022 C367 1/50 IC303 LA1832S FM IF DET./FM MPX./AM IF L352 100µH R392 270 100/10 C391 47/16 Q360 KTA1266 GR CONSTANT VOLTAGE R385 5.6K 3.3/50 C361 7 STEREO C370 1/50 R359 1.8K R384 5.6K G C355 22P C362 +B VSM 20 AM LOW CUT 19 4 AM IF IN FM/AM OUT 18 5 GND 6 SD C398 100/10 R387 5.6K R388 3.9K F AM OSC OUT 24 FM IF IN AM OSC IN 23 2 AM MIX OUT FM AFC 22 REG 3 AM RF IN 21 8 FM DET C399 0.022 R395 47K R352 1K 3 C353 CF351 R360 4.7K R358 3.9K R365 10K R351 5.6K T351 C392 C380 0.001 10/16 C387 +B 1 C394 47/16 C393 1/50 R379 7 FM/AM VDD 17 2.2K FM IN 16 8 IF CONT 15 AM IN C385 9 FM/AM 14 0.01 10 MO/ST SD 13 IF IN 12 11 ST IND R376 C386 1K 330P E C342 0.022 R382 150 4.5 MHz 1 X IN X OUT 22 VSS 21 2 AOUT 20 3 CE IC303 IC302 LC72131 PLL(TUNER) D X352 ZD351 DZ5.1BSB R363 6.8K CLK DO 5 D_GND C388 0.001 6 7 TUN_R A_GND 8 9 TUN_L H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 28 SCHEMATIC DIAGRAM (9/10) – 28 – 5 6 CD-M10000W/CP-M10000 MIC PWB-H MIC SIGNAL RK4 10K RK5 1K CK2 0.47 CK32 0.0047 0.1 CK7 0.47 CK8 4.7/50 CK9 2.2/50 5.6K JK1 MIC CK6 CK10 RK8 RK7 1K VRK1 CK11 20K(B) MIC CK13 VOLUME 0.0047 CK14 RK50 10K DATA 42 RK11 1K 2 MCLKCONT CLOCK 41 RK10 1K 3 VACL LATCH 40 RK9 1K 1 MICSW 4 MIC1 IN PS2 39 5 ALC1 PS1 38 6 MIC1NF IN VCF IL 37 7 MIC1 OUT L OUT 36 8 MIC1VOL IN R OUT 35 47P CK34 47P CK33 0.15 2.2/50 CK30 2.2/50 3 CK51 1/50 RK49 10K CK49 100P CK52 1/50 47P RK43 18K R IN 32 0.1 12 MIC2 OUT L IN 31 CK25 2.2/50 0.1 13 MIC2VOL IN VOL IN 30 CK24 2.2/50 LPF2OUT 29 15 LPF1 IN1 LPF2IN2 28 16 LPF2 IN2 LPF2IN1 27 2.2/50 0.22 20 ADCONT VCC 23 CK17 220/10 21 REF GND 22 CNPK1 MIC IN(L) MIC OUT(L) RK37 390 A_GND RK36 390 A_+10V RK40 1K MIC OUT(R) DATA CK23 0.001 CK22 0.0047 MIC LATCH CK21 0.068 MIC IN CK20 0.22 CLOCK QK1 KTC3203 Y DACONT 24 CK16 RK39 1K MIC IN(R) 18 AD INTOUT DAINTIN 25 19 AD INTIN 4 ICK2 KIA4558P OPE AMP. KEYCONIN 33 CK12 MICOUT 2.2/50 14 CK45 2.2/50 7 9 MIC2 IN SOURCEOUT 34 10 ALC2 ICK2 5 CK47 220P 11 MIC2NF IN 0.068 1 6 CK31 CK29 CK26 0.001 RK45 6.8K RK44 6.8K 17 LPF1 OUT DAINTOUT 26 CK15 CK35 CK46 2.2/50 2 10K 0.01 8 CK50 100P 10K CK1 18K RK41 0.001 ICK1 M65856SP MIC AMP. RK1 10K 220P RK46 RK42 CHASSIS GND DK2 DS1SS133 CK3 CK53 47/50 RK48 10K RK3 56K 56K DK1 DS1SS133 CK48 RK47 8.2K +B RK2 PINK1 CK41 100/16 RK14 100 +B CK18 100/16 RK13 1.2K CK42 0.022 CK19 0.022 CK44 47/25 RK12 100 CK43 47/25 +B RK38 100 RK15 100 CK72 100/16 ZDK1 MTZJ5.6B • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. Figure 29 SCHEMATIC DIAGRAM (10/10) MIC PWB-H CK30 CK29 CK24 CK25 CK26 CK3 DK2 CK21 CK22 CK19 CK42 CK20 DK1 CK31 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 CK18 CK35 ICK1 CK23 CK33 CK34 JK1 MIC CK17 RK11 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 CK10 CK41 CK32 RK12 CK2 CK6 CK7 RK1 B C E CK9 RK9 RK13 ZDK1 CK11 VRK1 MIC VOLUME RK3 QK1 RK7 RK8 RK5 RK4 CK1 CK14 CK13 CK8 CK12 CK16 CK15 RK10 RK2 CK43 CK44 CK53 4 5 3 6 2 7 1 8 7 8 9 RK44 RK49 CK49 RK47 RK38 RK36 RK37 CNS602 FROM MAIN PWB P30 6-A CNPK1 RK43 CK47 CK45 CK72 CK46 RK45 CK50 CK48 RK46 RK40 RK42 RK41 CK51 ICK2 RK14 RK15 CK52 RK50 RK48 10 9 8 7 6 5 4 3 2 1 10 Figure 29 WIRING SIDE OF P.W.BOARD (1/9) – 29 – RK39 11 12 1 2 3 4 5 6 7 8 9 10 CNS602 FROM MAIN PWB P23 12-E CD-M10000W/CP-M10000 TO MIC PWB P29 12-G CNPK1 CNS602 A 1 2 3 4 5 6 7 8 9 10 RD GY WH GY WH GY WH GY WH GY TO CD SERVO PWB P36 5-A CNP7 MAIN PWB-A RD WH GY WH GY WH CNS11 1 2 3 4 5 6 B R373 R374 R368 R378 R372 R388 C386 R387 X352 1 2 3 4 5 6 7 8 9 10 11 C387 C394 R381 TP301 SO301 L352 ZD351 C398 C388 C308 C314 R316 T303 C317 R311 C309 C356 C357 R355 C316 C362 C323 T306 C330 C331 1 R361 R358 C332 R323 IC303 C358 C355 X351 C399 C366 24 23 22 21 20 19 18 17 16 15 14 13 VD302 R313 R336 C334 B C351 CF351 C354 R353 C353 R352 1 2 3 4 5 6 7 8 9 10 11 12 T302 CF303 1 2 3 10 C370 C369 C367 C371 TP302 C373 R357 R350 R362 R356 C368 C364 C365 VD301 C335 C338 R626 C374 C372 R364 L312 D301 BF301 1 2 3 D302 SW601 SPAN SELECTOR Q360 R365 C303 E R395 R383 T351 R351 1 2 B C E R363 CNP301 1 2 R382 CF352 3 B C E 2 C324 R325 1 R327 R314 VD303 R302 C311 C310 C313 C352 R309 C350 T301 C342 AM LOOP ANTENNA R393 C385 R391 R385 Q302 R322 9 C306 8 7 IC301 6 5 C305 4 3 C304 2 1 C315 D C393 C307 GND C318 C361 C363 FM ANTENNA TERMINAL R380 R392 C312 FM 75 OHMS D305 C R384 22 21 20 19 18 17 16 15 14 13 12 R377 C392 L351 C380 R375 R627 C397 C395 R360 R379 CNP601 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 C396 R376 R625 IC302 C381 R359 C391 C382 50 kHz/9 kHz R606 C612 R607 R608 IC601 R613 Q603 C632 R631 C616 R616 C631 R633 B C E B C E Q604 R614 C635 C614 R621 Q605 C636 C617 R632 JK601 VIDEO/AUX IN L-CH E C B E C B R619 R634 R-CH R611 R615 C615 100 kHz/10 kHz F R620 C620 R622 Q606 C618 C6 C606 1 C611 2 R605 3 C607 4 5 6 7 C609 8 C6 9 10 C627 11 12 C602 24 23 22 C608 21 20 19 C610 18 17 16 15 C622 14 13 C628 R618 R612 G C630 C641 C624 R617 C623 R623 C626 R610 R609 C 1 2 3 4 5 6 7 H CN TO AM P3 1 2 3 4 Figure 30 WIRING SIDE OF P.W.BOARD (2/9) – 30 – 5 6 CD-M10000W/CP-M10000 TO MIC PWB P29 12-G TO DISPLAY PWB P33 11-A CNP701 8 9 10 WH GY FC701 21 1 Q122 R140 R146 C142 C140 R142 C145 R158 R154 R153 C135 Q121 R145 B C E C136 C134 C139 R126 R136 12 13 11 14 R138 R638 R637 R139 10 15 C132 9 R137 C122 16 R157 8 17 R134 C131 C123 C605 7 18 C128 C114 C116 6 19 Q865 R131 C127 R125 5 20 C113 C120 4 21 B C119 C121 Q864 3 22 C R123 R172 2 23 R124 E 3 1 24 C118 R174 R171 C117 2 R121 R865 C867 R169 IC101 R120 1 C861 R122 R119 Q105 R102 R173 R863 C102 R105 E C B C105 C865 R101 Q103 R118 1 4 5 R103 E C B BI102 BI12A IC860 6 Q108 Q104 3 7 R104 C101 E E 2 7 E C B 1 BI11 R112 C C 1 8 3 B R873 Q107 B R106 C863 E C B R880 C154 R110 Q106 D862 1 C106 R166 R109 R874 R878 R108 R867 R167 R107 R168 Q111 R879 C150 C864 E C B 6 R115 R875 1 L104 C153 1 Q128 2 C152 B B Q109 Q863 R868 2 R114 3 C C C151 E 3 E E R164 Q110 R155 C R160 Q862 R869 R162 R113 B C899 E C B C133 R625 1 R170 C112 C107 R111 D864 C108 BI602 R861 C866 R117 R870 C111 C115 R871 D861 R866 10 R627 R132 C124 C141 R141 R135 CNP601 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 R156 B C E C146 Q850 1 2 3 1 2 3 B C E 1 P37 11-F TO TAPE 2 RECORD/PLAYBACK ERASE HEAD 1 Q126 Q851 CNS102 BL YL 6 WH 5 4 PK 3 WH 2 BK 1 Q124 3 2 1 Q852 BI102 7 BL YL WH BK PK WH BK 3 1 PK BK WH BI12B PK BK WH BI12A 3 C613 C856 C606 D863 C611 C859 R856 R605 R855 R854 C607 C621 C609 ZD851 R853 1 C852 C625 R852 C629 0 P37 10-F FROM TAPE 1 PLAYBACK HEAD C855 C619 BI12B C627 2 3 CNP101 R624 R618 COLOR TABLE 1 2 3 BI13 R617 C850 1 C860 C642 2 C623 1 623 LG1 CNS901 1 2 3 4 5 6 7 8 9 10 11 12 13 CNP901 TO AMP. PWB P34 2-E 7 1 RD WH CNP902 2 CNS13 TO POWER PWB P35 8-G 8 RD WH BI13 9 1 BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 2 10 Figure 31 WIRING SIDE OF P.W.BOARD (3/9) – 31 – 11 12 CD-M10000W/CP-M10000 DISPLAY PWB-B1 A 1 2 3 CNS703 B 9 BI703 9 RD 8 GY 7 WH 6 GY 5 WH GY 4 3 WH 2 GY 1 WH Q703 Q701 B C E B C E C714 1 R702 R705 R719 R701 R704 CNP8 TO CD SERVO PWB P36 4-A 6 7 8 9 10 11 12 13 14 15 16 B C E R716 R796 C725 Q702 Q709 BI705 C724 C732 R799 3 2 1 R703 C733 1 R782 RS707 SW710 DISC 2 CS705 1 2 3 4 RS716 RD10 F R779 R780 R773 R775 R776 R777 RD08 CS713 CS707 CS710 D704 RS717 SW733 VIDEO R752 R737 Q704 C721 RS715 C720 B C E R795 LED707 SW715 RD12 MONSTER RD11 BASS RD07 CS706 RS711 B C E B Q708 RD14 C E SW716 EQUAL D713 D712 R R757 C719 JOG701 RD15 RL70 LED708 SW711 DISC 3 CNP702 1 3 5 7 9 2 4 6 8 10 SW712 DISC SKIP 1 10 FC702 LED PWB-B3 G P37 9-A TO TAPE MECHANISM PWB 3 3 GL 2 GL 1 RD CNS704 BI704 LED703 1 LED704 H 1 2 3 RD35 RD36 RD13 R736 Q705 LED706 RD09 RS709 E IC703 RS720 8 7 D701 6 RS714 5 ZD701 SW709 DISC 1 CS702 D702 RS708 SW713 OPEN/ CLOSE RS705 3 2 1 RS701 CNP704 RS702 RS718 CS711 CS712 RS704 R706 D703 CS704 RS703 1 2 3 CS703 CS701 4 RS713 8 7 CS709 6 RS706 5 IC704 CS708 D RS710 RS719 D723 R724 D722 RS712 R783 R784 R785 R786 R791 R770 XL701 R778 R708 C729 C723 C728 D718 4 R797 C CNS705 4 WH 3 BL CNP903 2 WH TO POWR 1 RD PWB P35 9-G R781 RX701 3 2 1 4 Figure 32 WIRING SIDE OF P.W.BOARD (4/9) – 32 – 5 6 CD-M10000W/CP-M10000 TO MAIN PWB P31 9-A CNP601 85 90 75 70 65 95 R744 R745 R742 R741 R739 R738 60 55 IC701 10 15 51 50 45 40 20 25 35 R743 R751 R767 R764 R763 R765 R761 R760 R756 R755 R766 R700 LED722 R762 R768 R772 R771 R769 R790 R789 R788 R787 SW701 ON/ STAND-BY R740 R720 R718 R714 R717 R713 R792 R783 R784 R785 R786 R791 R770 R721 R758 31 D720 C726 R747 R748 R753 30 D721 R746 5 1 R793 CNP701 1 3 5 7 9 11 13 15 17 19 21 2 4 6 8 10 12 14 16 18 20 C715 R749 100 C725 80 DT703 81 DT701 FL701 FC701 21 1 56 57 58 R794 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 RD03 RD04 C701 C727 SW734 TUNER RD35 RD36 R754 RL704 RL703 R759 RD05 RD06 SW722 CD R725 SW723 TAPE RD13 RL702 LED701 LED702 C702 18 1 RL701 15 5 RL705 4 9 SW716 EQUALIZER LED705 SW729 STOP SW728 PLAY RL707 SW727 FAST FORWARD SW702 CLOCK 10 RD01 RD31 RD30 RD29 RD02 SW730 REVERSE PLAY SW726 FAST REWIND SW717 REVERSE MODE SW731 RECORD/ PAUSE RD28 COLOR TABLE RD34 RD27 BR SW724 TUNING DOWN SW725 MEMORY SET 8 SW703 TIMER RD25 RD26 RD33 7 IC702 SW732 TUNING UP RD32 RL706 D15 RL708 SW714 DIMMER 9 10 Figure 33 WIRING SIDE OF P.W.BOARD (5/9) – 33 – BROWN RD( R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY W H( W ) WHITE BK BLACK PK PINK 11 12 CD-M10000W/CP-M10000 A R950 R949 M904 FAN MOTOR D913 AMP. PWB-D2 Q903 1 5 R902 FW901A D904 2 2 1 1 D903 B C E C904 E C B CNP907 BR E C B Q904 B C E Q902 R922 C925 R921 C924 C923 R923 R919 R920 Q901 RD D905 R901 R980 R978 CNS907 C903 C914 R904 B R903 R913 C915 IC902 C913 R907 R975 R908 C901 C911 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 C C922 C920 R911 ZD902 R951 R952 ZD901 C919 C957 C921 R917 R929 R926 R927 R925 C930 7 L902 L901 CNS906 GY 7 WH 6 GY 5 WH 4 GY 3 WH 2 RD 1 BI906 C928 R945 R946 C902 R930 R953 R928 C929 R976 R944 R977 R932 R954 R931 R979 C905 R916 C927 C912 R918 C916 R912 BI908A 6 1 D908 D902 C956 R420 C451 C448 R401 R418 C446 R906 1 2 3 4 R410 C434 IC401 C436 R412 C437 R404 R402 C435 E CNS901 TO MAIN PWB P31 7-H R910 R981 C983 C986 R982 C444 C442 C445 ZD402 R415 ZD401 C440 C997 Q911 B C E Q912 E C B R988 R987 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R937 1 WH R991 WH C993 D914 R934 R933 7 C981 C995 C991 1 6 D906 RL901 1 BI908A 6 RL902 1 C999 R957 R958 R964 R965 CFM943 R963 QFM906 M903 FAN MOTOR RFM938 E C B DFM921 CNP904 2 1 C978 6 E Q905 C B R967 CFM947 R966 R969 R968 RFM937 DFM920 DFM907 R962 BI908B R960 RFM939 R959 RD WH GY WH GY WH BI908B L903 C918 C932 C917 6 ZD903 R961 R900 5 IC901 G L-CH 2 4 7 ZD904 R940 1 3 R989 L904 2 RD R974 R999 R998 R936 R935 R942 1 CNS904 WH R948 2 C979 R955 RD RD 1 D915 R956 H RD C980 C992 C998 BR CNS905 RD BI905 C990 R990 D919 R941 F LG901 C988 C989 C987 C443 R924 R943 C909 C908 C982 R411 R408 C438 R938 C906 C907 R983 R985 R905 R409 13 12 11 10 9 8 7 6 5 4 3 2 1 CNP901 C985 8 7 6 5 R407 C432 C433 R939 Q907 R947 C441 R405 C447 R909 R986 R417 R984 C439 R419 1 D901 P901 3 2 1 C984 C449 C450 R414 R416 D Q908 B C E R413 3 L-CH R-CH SO901 SPEAKER TERMINAL R-CH 4 Figure 34 WIRING SIDE OF P.W.BOARD (6/9) – 34 – 5 6 CD-M10000W/CP-M10000 TRANSFORMER PWB-D3 AC POWER SUPPLY CORD AC 110/127/220/ 230-240 V, 50/60 Hz SW801 VOLTAGE SELECTOR 220V 230-240V 110V F803 T8A L 250V 127V F802 T8A L 250V LG802 CNP802 LG801 2 1 110 V BL 127 V 1 BL CNS802 2 220 V 230-240 V F801 T15A L 250V T.F T801 MAIN POWER TRANSFORMER T802 SUB POWER TRANSFORMER COLOR TABLE BROWN RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY W H ( W) WHITE BK BLACK PK PINK YL BK YL WH WH BR RD(R) 1 2 3 4 5 CNS801 1 2 3 4 5 CNP801 F804 T6.3A L 250V F809 T2A L 250V F805 T6.3A L 250V F806 T5A L 250V F807 T5A L 250V D802 C811 F808 T2A L 250V D801 D806 C813 D803 C812 D805 D809 HEADPHONES PWB-B2 C816 D810 C810 C815 C818 FW901 C814 C809 C817 1 JK670 HEADPHONES C819 C821 D804 CNP705 5 ZD804 R807 R806 R802 C822 B C E Q803 ZD801 R803 C824 CNP905 1 2 3 4 5 CNP906 6 7 1 2 3 4 5 67 R805 R819 ZD802 C823 FROM MAIN PWB P31 8-H FROM DISPLAY PWB P32 1-C CNS705 R810 R811 1 2 3 4 CNP903 2 1 CNP902 CNS13 POWER PWB-D1 7 8 9 10 Figure 35 WIRING SIDE OF P.W.BOARD (7/9) – 35 – 11 12 CD-M10000W/CP-M10000 P32 1-B FROM DISPLAY PWB CNS703 CD SERVO PWB-C A C38 P30 4-A FROM MAIN PWB CNS11 3 R37 CNP8 7 CNP1 7 C 5 C50 80 R4 R32 CT1 20 C12 CT2 20 15 25 30 35 C23 R14 1 2 3 Q3 40 R19 42 D2 D1 R45 CNP4 CNP3 6 5 4 3 2 1 E 6 R18 R30 R17 R16 R13 R15 C10 22 9 C14 R46 C41 10 R24 R26 C25 C16 C44 C9 10 5 11 R20 C11 IC2 C40 41 40 C13 1 C48 R27 R25 C24 C26 R43 21 C39 D L1 XL1 60 65 55 70 50 75 45 IC1 35 5 10 30 15 25 1 R1 R6 R3 C18 12 R28 C6 R2 21 B C E 61 R5 R44 ZD2 Q2 R29 R40 R39 R41 R65 R22 C35 C27 R49 R23 R47 ZD1 C36 C8 6 5 4 3 2 1 R80 C42 R31 R10 R12 1 2 3 4 5 6 C30 C28 C34 C37 R9 R42 8 R34 C33 C32 C3 C5 C1 R11 C2 R36 R35 C51 R33 R38 8 7 C49 6 5 C4 4 3 Q1 E C B 2 1 CNP2 B CNP7 1 2 3 4 5 6 7 8 9 R7 4 6 5 4 3 2 1 2 1 CNS3A 654 321 WH GR WH GR WH RD PICKUP UNIT(306) F CD MOTOR PWB-G 654 321 CNS3B 1 CNP3A 654 321 7 8 M2 SLED MOTOR 1 2 3 4 5 6 7 8 + G RD WH GY WH GY WH GY WH 1 SW4 PICKUP IN CNS2B + 1 2 3 4 5 6 7 8 CNS2A CNS1B 1 2 3 4 5 6 7 RD WH BL WH BL WH BL - CNS1A 1 2 3 4 5 6 7 - H M1 SPINDLE MOTOR • The numbers 1 to 12 are waveform numbers shown in page 40. 1 2 3 4 Figure 36 WIRING SIDE OF P.W.BOARD (8/9) – 36 – 5 6 CD-M10000W/CP-M10000 P32 4-B TO DISPLAY PWB TAPE MECHANISM ASSEMBLY CNP702 FC702 1 SW TAPE MECHANISM PWB-F 10 SW 1 3 5 7 9 2 4 6 8 10 SW SW PH 1 2 SOLENOID + - SOLENOID TAPE MOTOR TAPE 1 PLAYBACK HEAD PK WH BK TAPE 2 RECORD/PLAYBACK/ERASE HEAD PK WH BK GR 123456 3 2 1 CNP101 CNS102 P31 12-D FROM MAIN PWB P31 12-F TO MAIN PWB COLOR TABLE CD LOADING MOTOR PWB-E WH BK WH BK WH RD 6 5 4 3 2 1 M3 CD LOADING MOTOR CNS4 6 1 BI4 + – SW3 DISC NUMBER 7 SW1 OPEN/ CLOSE SW2 CLAMP 8 9 10 Figure 37 WIRING SIDE OF P.W.BOARD (9/9) – 37 – 11 BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 12 CD-M10000W/CP-M10000 VOLTAGE IC1 PIN NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 IC101 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VOLTAGE VOLTAGE 1.6 V 1V 1.6 V 1.8 V 3.3 V 0V 1.6 V 1.6 V 1.6 V 1.6 V 1.6 V 1.6 V 1.5 V 1.5 V 1.5 V 1.5 V 0.8 V 3.2 V 0V 1.6 V 1.6 V 1.6 V 1.6 V 0V 0V 3.2 V 0V 0V 0V 0V 0V 0V 0V 0V 1.6 V 0V 0V 3.2 V 3.2 V 0V 3.7 V 3.7 V 0V 0V 3.7 V 3.2 V 3.2 V 3.2 V 0V 0V 0V 3.2 V 0V 0V 0V 0V 0V 3.2 V 0V 0V 0V 4.7 V 0V 4.9 V 4.9 V 4.9 V 0V 4.9 V 0V 0V 0V 0V 0V 0V 0V 3.2 V 3.2 V 3.2 V 0V 3.2 V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 VOLTAGE Q850 IC2 1.7 V 1.7 V 1.8 V 2.1 V 2.1 V 2.1 V 2V 0V 0V 0V 0V 0V 0V 0V 2.1 V 2.1 V 1.6 V 4.9 V 3V 1.6 V 0V 0V 4.9 V 4.9 V 1.6 V 2.1 V 2.1 V 0V 0V 0V 0V 0V 0V 0V 0V 4.2 V 0V 2.1 V 2.1 V 4.9 V 3.7 V 3.7 V PIN NO. 1 2 3 VOLTAGE 13.9 V 13.3 V 22.1 V Q851 PIN NO. 1 2 3 VOLTAGE 22 V 0V 10 V VOLTAGE 20 V 0.6 V 5.6 V IC301 PIN NO. 1 2 3 4 5 6 7 8 9 VOLTAGE 0V 0V 0.3 V 0V 0V 0V 0V 0V 0V IC703 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE 0V 0V 0.5 V 2V 0V 1.3 V 0V 0.6 V 3.5 V 3.4 V 0V 0V 7V 4.1 V 0V 3.4 V 0.6 V 0V 0.7 V 0V 2V 0.5 V 0V 0V VOLTAGE 0.2 V 0.2 V 0.2 V -11 V 0V 0V 0V 6.44 V IC601 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VOLTAGE PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 VOLTAGE IC303 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VOLTAGE 2.1 V 5V 2.1 V 2.1 V 0V 5.1 V 5.1 V 2.9 V 5V 4.3 V 3.9 V 3.9 V 3.5 V 1.3 V 1.3 V 2.1 V 2.4 V 2.3 V 0V 0.4 V 2.7 V 2.7 V 5V 3.5 V IC901 Q852 PIN NO. 1 2 3 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 VOLTAGE 71.58 V 31.25 V 16.82 V -17.12 V -31.45 V -71.51 V 0V 0V 0V 0V 0V -70 V -70 V -0.15 V -0.15 V -68.54 V -0.15 V -0.15 V 0V 0V 0V 0V 0V 0V 0V 5.3 V 5.3 V 5V 5V 5.3 V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 10.2 V 0V ICK1 0.81 V 1V 0.75 V 2.5 V 4.6 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 0.5 V 2.5 V 0V 5V 0V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 0V 0V 0V 0V 0V IC704 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE 0V 0V 0V -10.96 V 0V 0V 0V 6.41 V – 38 – PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 IC701 PIN NO. 4.23 V 51 52 4.14 V 53 0V 54 0V 55 4.15 V 56 4.2 V 57 4.2 V 58 0V 59 0V 60 4.23 V 61 2.34 V 62 1.86 V 63 0V 64 3.87 V 65 4.45 V 66 0V 67 0V 68 0V 69 0V 70 0V 71 0V 72 0V 73 0V 74 0V 75 0V 76 4.63 V 77 4.23 V 78 0V 79 0V 80 0V 81 4.48 V 82 4.25 V 83 4.5 V 84 4.3 V 85 4.44 V 86 2.13 V 87 4.88 V 88 4.9 V 89 4.36 V 90 0V 0V 91 92 12.66 V 12.78 V 93 94 12.3 V 95 4.9 V 96 4.42 V 97 4.33 V 98 4.32 V 99 4.48 V 100 4.78 V VOLTAGE IC702 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 VOLTAGE 0V 0V 0V 0V 8.56 V 8.54 V 0V 0V 8.59 V 8.57 V 8.56 V 8.56 V 8.71 V 8.72 V 0V 0V 0V 5.1 V CNP902 PIN VOLTAGE NO. 1 11.1 V 2 0V 3 21.9 V 4 0V IC902 VOLTAGE 0V 0V 4.6 V 5V 5V 5V 0V 0V -33.1 V 0V 0V 0V 0V 0V 0V 0V -37.4 V -32.6 V -32.7 V -29.8 V -29.9 V -32.7 V -19.2 V -22 V -32.8 V -30.1 V -32.8 V -17.6 V -32.8 V -32.3 V -24.9 V -19.5 V -22.2 V -33 V -33 V -19.6 V -19.6 V -14.41 V -22.8 V -27.2 V -27.2 V -27.5 V -27.7 V -27.7 V -27.7 V -27.6 V -27.7 V -27.7 V -27.7 V -30.2 V IC302 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 VOLTAGE PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE 2.4 V (-2.4 V) 0 V (0 V) 0 V (0 V) 0 V (0 V) 2.9 V (2.9 V) 4.8 V (4.9 V) 0.1 V (9.9 V) 4.2 V (0 V) 3.3 V (0 V) 0 V (3.9 V) 5.1 V (5.1 V) 2.2 V (0 V) 5 V (5 V) 0 V (0 V) 0 V (2.4 V) 2.3 V (0 V) 5 V (5 V) 0.6 V (4.8 V) 0.8 V (1.8 V) 2 V (1.0 V) 0 V (0 V) 2.5 V (3.0 V) ICK2 5V 5V 5V 0V 5V 5V 5V 10 V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 VOLTAGE 59.32 V 26.55 V 14.68 V -14.64 V -26.54 V -59.19 V 0V 0V 0V 0V 0V -57.75 V 57.88 V -0.15 V -0.15 V -56.6 V -0.16 V -0.16 V CNP903 PIN VOLTAGE NO. 1 -26.4 V 2 26.5 V 3 0V 4 0V 5 -60.2 V 6 0V 7 60.3 V 8 60.3 V IC401 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE 0V 0V 0V -14.15 V 0V 0V 0V 14.75 V IC860 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE -10.34 V 3.22 V 0.6 V -12.2 V 0V 0.4 V -10.9 V 10.1 V CNP905 PIN VOLTAGE NO. 1 1.95 V 2 -26.3 V 3 -32.8 V 4 -26.3 V CNP901 PIN VOLTAGE NO. 1 0V 2 0V 3 0V 4 0V 5 21.7 V 6 0V 7 10.4 V 8 12.25 V 9 -13.25 V 10 0 V 11 3.88 V 12 4.38 V 13 5.02 V CD-M10000W/CP-M10000 NOTES ON SCHEMATIC DIAGRAM • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means pico-farad and the unit of the capacitor without such a symbol is microfarad. As to electrolytic capacitor, the expression “capacitance/withstand voltage” is used. (CH), (TH), (RH), (UJ): Temperature compensation (ML): Mylar type (P.P.): Polypropylene type • Schematic diagram and Wiring Side of P.W.Board for this model are subject to change for improvement without prior notice. REF. NO • The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given. 1. In the tuner section, indicates AM indicates FM stereo 2. In the main section, a tape is being played back. 3. In the deck section, a tape is being played back. ( ) indicates the record state. 4. In the power section, a tape is being played back. 5. In the CD section, the CD is stopped. • Parts marked with “ ”( ) are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. POSITION REF. NO SW1 OPEN/CLOSE ON—OFF SW717 REVERSE MODE ON—OFF SW2 CLAMP ON—OFF SW722 CD ON—OFF SW3 DISC NUMBER ON—OFF SW723 TAPE ON—OFF SW4 PICKUP IN ON—OFF SW724 TUNING DOWN ON—OFF SW601 SPAN SELECTOR 50 kHz/9 kHz SW725 MEMORY SET ON—OFF SW701 ON/STAND-BY ON—OFF SW726 FAST REWIND ON—OFF SW702 CLOCK ON—OFF SW727 FAST FORWARD ON—OFF SW703 TIMER ON—OFF SW728 PLAY ON—OFF SW709 DISC 1 ON—OFF SW729 STOP ON—OFF SW710 DISC 2 ON—OFF SW730 REVERSE PLAY ON—OFF SW711 DISC 3 ON—OFF SW731 RECORD/PAUSE ON—OFF TUNING UP ON—OFF ON—OFF DESCRIPTION POSITION DESCRIPTION SW712 DISC SKIP ON—OFF SW732 SW713 OPEN/CLOSE ON—OFF SW733 VIDEO SW714 DIMMER ON—OFF SW734 TUNER ON—OFF SW801 VOLTAGE SELECTOR 230-240 V SW715 MONSTER BASS ON—OFF SW716 EQUALIZER ON—OFF TYPES OF TRANSISTOR AND LED FRONT VIEW FRONT VIEW E C B (S) (G) (D) (1) (2) (3) KTA1266 GR KTA1273 Y KTA1274 Y KTC3194 Y KTC3199 GR KTC3203 Y KRC102 M KRC104 M KRA107 M 2SA1015 GR 2SC1845 F FRONT VIEW B C E (1) (2) (3) KTC2026 KIA7810AP KIA7805AP – 39 – 4204SRT7 4204UYT7 4204UGT7 31URT21 CD-M10000W/CP-M10000 WAVEFORMS OF CD CIRCUIT Stopped CH1=500 mV DC 10:1 CH3=500 mV DC 10:1 T 1 IC1 21 Stopped CH1=200 mV DC 10:1 500 ms/div (500 ms/div) NORM:20 kS/s IC1 20 1999/04/07 09:51:15 500 ms/div (500 ms/div) NORM:20 kS/s FDO T 1 TDO 2 T CH2=500 mV DC 10:1 3 FDO 1 IC1 21 2 6 IC1 22 1 SPDO CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.000 V CH4 : 0.00 V Stopped CH1=500 mV DC 10:1 1 IC1 21 3 IC1 67 CH2=10 V DC 10:1 =Record Length= Main : 100 K Zoom : 2K CH3=1 V DC 10:1 =Filter= Smoothing : ON BW : FULL =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V Stopped CH1=500 mV DC 10:1 500 ms/div (500 ms/div) NORM:20 kS/s =Record Length= Main : 100 K Zoom : 2K CH3=1 V DC 10:1 =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924 ms Hold off : 0.2 µs 1999/04/05 17:33:17 CH4=1 V 500 ms/div (500 ms/div) DC 10:1 NORM:20 kS/s PDO1 7 FDO IC1 73 3 1 4 T 2 DRF 8 PDO2 IC1 74 T 4 TE IC1 15 3 1 CH Position To -3 div -1 div 0 div +1 div +3 div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000 V Main : 100 K BW : FULL CH2 : 0.0 V Zoom : 2K CH3 : 0.00 V CH4 : 0.00 V IC1 21 FDO 1 CH1 v/DIV 500 mV CH2 Position 0.20 div =Filter= Smoothing : ON BW : FULL =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Stopped CH1=2 V DC 10:1 =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K T =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0 ns Hold off : 0.2 µs 1999/04/07 09:25:28 500 ns/div (500 ns/div) NORM:200 MS/s T 5 9 IC1 39 DOUT =Filter= Smoothing : ON BW : FULL Vp-p=1.0 V~1.3 V 0.5 mV/div,0.5 µsec/div Stopped CH1=10 V DC 10:1 IC1 15 =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 1K Zoom : 100 =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887 ms Hold off : 0.2 µs T CH2=1 V DC 10:1 100 ms/div (100 ms/div) NORM:100 kS/s Stopped CH1=2 V DC 10:1 10 TE 4 1 IC1 4 T CH2=2 V DC 10:1 CH3=2 V DC 10:1 1999/04/05 20:50:17 5 µs/div (5 µs/div) NORM:100 kS/s IC1 58 2 1 LRSY 11 IC1 59 2 3 IC1 67 T 1 DRF DATACK 12 IC1 60 T 3 DATA =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.0 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924 ms Hold off : 0.2 µs =Filter= Smoothing : ON BW : FULL – 40 – CH3 v/DIV 2V =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 5K Zoom : 100 =Trigger= Mode : AUTO Type : EDGE CH3 Delay : 0.0 ns Hold off : 0.2 µs CD-M10000W/CP-M10000 TROUBLESHOOTING When the CD does not function When the CD section does not operate when the objective lens of the optical pickup is dirty, this section may not operate. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check the following items. Remove the cabinet and follow the trouble shooting instructions. "Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attempting any adjustment make certain that the lens is clean. If not, clean it as mentioned below." Turn off the power, and wipe the lens softly using a cleaning paper moistened with commercially available cleaning solution so as not to damage it. Be careful not to touch the lens with bare hands. Dust gradually accumulates on the objective lens during use, and it may degrade performance. To avoid this problem, use a cleaning disc designed for CD optical pickup lenses.. 1. CD optical pickup Lens cleaner disc Parts code UDSKA0004AFZZ HOW TO USE 1. Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the brush on the CD cleaner disc which has the mark next to it. 2. Place the CD cleaner disc onto the CD disc tray with the brush side down,then press the play button. 3. You will hear music for about 20 seconds and the CD player will automatically stop. If it continuous to turn, press the stop button. Cleaning fluid CAUTION The CD lens cleaner should be effective for 30-50 operations, however if the brushes become worn out earlier then please the cleaner disc. If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft cloth. Do not drink the cleaner fluid or allow it to come in contact with the eyes. In the event of this happening then drink and / or rinse with clean water and seek medical advice. The CD cleaner disc must not be used on car CD players or on computer CD-ROM drives. All rights reserved. Unauthorized duplicating, broadcasting and renting this product is prohibited by law. Cleaner disc When a CD cannot be played 1. "E-CD01" is displayed. (1) Check the power to IC1 (LC78645NE), the presence of the clock signal (33.8688 MHz) and the status of the RESET terminal (pin 66 on IC1). (2) Does the pickup move to the PICKUP-IN Switch (SW4) position ? If (1) and (2) are OK, check the system microcomputer (especially the communication line with the DSP). 2. Pressing the CD operation key is accepted, but playback does not occur. (1) Focus-HF system check (2) Tracking system check (3) Spin system check (4) PLL system check (5) Others – 41 – CD-M10000W/CP-M10000 Stopped CH1=500 mV DC 10:1 (1) Focus-HF system check. Although a CD is inserted and the cover is closed, "NO DISC" is displayed. CH3=500 mV DC 10:1 T 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 Press the OPEN/CLOSE switch (SW1) without inserting a disc, and try starting the playback operation. TDO 3 CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.000 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Figure 42-1 1. Does the pickup move to the PICKUP-IN Switch (SW4) position ? No Sled motor (M2). Yes No 2. Does the focus (lens) move up and down ? (Waveform drawing Figure 42-1) Check the focus peripheral circuit. Yes No 3. Is the laser lit ? Check the laser diode driver Q1 peripheral circuit. Yes No 4. Is the turntable rotating ? Spindle motor (M1). When a disc is loaded, start playback operation. No 1. Is focus servo activated ? (Waveform drawing Figure 42-2) Pins 7~12, 79 and 80 on IC1 Check the laser diode driver Q1 peripheral circuit. Yes No 2. Does DRF change from "L" to "H" ? Is the disc rotating ? No 3. Is the HF waveform normal ? (Waveform drawing Figure 42-3) CH3=1 V DC 10:1 Check the spin system. If the disc is spinning and a HF waveform is generated, DRF will go H. Yes Stopped CH1=500 mV CH2=10 V DC 10:1 DC 10:1 No If the level is not normal. 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 T 2 DRF TE 3 CH Position To -3 div -1 div 0 div +1 div +3 div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000 V Main : 100 K BW : FULL CH2 : 0.0 V Zoom : 2K CH3 : 0.00 V CH4 : 0.00 V CH2 Position 0.20 div =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Vp-p=1.0 V~1.3 V 0.5 mV/div,0.5 µsec/div Figure 42-2 Figure 42-3 – 42 – CD-M10000W/CP-M10000 (2) Tracking system check. Check the TE waveform at pin 15 on IC1. If the waveform shown in Figure 43-1 appears and soon after NO DISC appears ? Yes The tracking servo is not activated. Check the peripheral circuits at pins 14, 15 and 20 on IC1, and CNS1A/B. Yes A normal jump operation cannot be completed or the beginning of the track cannot be found. Check the around pin 20 on IC1. No "Initialization" is possible, but play is not possible ? No "Initialization" is not possible. Data cannot be read. Check the VCO-PLL system. Stopped CH1=10 V DC 10:1 T CH2=1 V DC 10:1 100 ms/div (100 ms/div) NORM:100 kS/s TE 2 T 1 DRF =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.0 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924 ms Hold off : 0.2 µs Figure 43-1 (3) Spin system check. Press the OPEN/CLOSE switch without inserting a disc, and then try starting the play operation. 1. The turntable rotates a little ? (Waveform drawing Figure 43-2) The spin driver circuit is OK. Yes No 2. The turntable doesn't rotate. Check around pin 22 on IC1, pins 15 and 16 on IC3, and CNS3A/B. Stopped CH1=200 mV DC 10:1 T 1999/04/07 09:51:15 500 ms/div (500 ms/div) NORM:20 kS/s CH2=500 mV DC 10:1 T FDO 2 1 SPDO =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K Figure 43-2 – 43 – =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924 ms Hold off : 0.2 µs CD-M10000W/CP-M10000 (4) PLL system check. Stopped CH1=500 mV DC 10:1 CH3=1 V DC 10:1 1999/04/05 17:33:17 CH4=1 V 500 ms/div (500 ms/div) DC 10:1 NORM:20 kS/s PDO1 When a disc is loaded, start play operation. 3 4 The HF waveform is normal, but the TOC data cannot be read. PDO2 T FDO 1 Check the PDO waveform. (Figure 44-1) CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0 ns Hold off : 0.2 µs Check around pins 73~78 on IC1. Figure 44-1 (5) Others. The HF waveform is normal and the time is displayed normally, but no sound is produced. Or the sound has dropouts. No Is pin 52 (C2F) on IC1 "L" ? There are too many error flags on a damaged disc which makes error correction impossible. Yes 1. When playing at normal speed. Check the peripheral circuit at pin 39 (DOUT) on IC1 and the waveform (Figure 44-2). Check again using a known good disc. Stopped CH1=2 V DC 10:1 If OK, Check the unit. T 1999/04/07 09:25:28 500 ns/div (500 ns/div) NORM:200 MS/s T 1 DOUT =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 1K Zoom : 100 Figure 44-2 – 44 – =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887 ms Hold off : 0.2 µs CD-M10000W/CP-M10000 FUNCTION TABLE OF IC IC1 VHiLC78645NE1: CD Servo (LC78645NE) (1/2) Pin No. Terminal Name Input/Output Setting in Reset 1 SLCO Output — 2 SLCIST Input — 3 EFMIN Input — 4 RF Output — 5 RFVDD Input — RF power terminal. 6 RFVSS — — RF earth terminal. To be connected to 0 V. 7 FIN1 Input — A+C signal input terminal. 8 FIN2 Input — B+D signal input terminal. 9 TIN1 Input — E signal input terminal. 10 TIN2 Input — F signal input terminal. 11 VREF Output RFVDD/2 12 REFI Input — 13* FE Output ZHI 14 TEC Output — 15* TE Output ZHI TE signal monitor terminal. 16* RFMON Output ZHI RF internal signal monitor terminal. 17 JITTC — — Capacitor connection terminal for jitter detection. 18 ADAVDD Input — Power terminal for servo A/D, D/A. 19 ADAVSS — — Earth terminal for serve A/D, D/A. To be connected to 0 V. 20 TDO Output ADAVDD/2 Output terminal for tracking control. D/A output. 21 FDO Output ADAVDD/2 Output terminal for focus control. D/A output. 22 SPDO Output ADAVDD/2 Output terminal for spindle control. D/A output. 23 SLDO Output ADAVDD/2 Output terminal for sled control. D/A output. 24* GPDAC Output ADAVDD/2 25 CONT4 Input/Output Input Mode 26 CONT5 Input/Output Input Mode 27* SBCK/CONT6 Input/Output Input Mode 28 SBCK/FG Input — 29* DEFECT Output L Defect terminal. 30* V/1P Output H Auto switching monitor output terminal for rough servo phase control. “H”: rough servo, “L”: phase servo. 31* FSEQ Output L Sync signal detection output terminal. The status changes to “H” when the sync signal detected in EFM and the sync signal of internal generation are identified. 32* MON11 Output L Internal signal monitor terminal 1. 33* MON12 Output L Internal signal monitor terminal 2. 34* MON13 Output L Internal signal monitor terminal 3. 35* MON14 Output L Internal signal monitor terminal 4. 36* MON15 Output L Internal signal monitor terminal 5. 37 VSS — — Digital system earth terminal. To be connected to 0 V. 38 VDD Input — Digital system power terminal. Function Control output. For slice level control. Resistor connection terminal for SLCO output current setting. RF signal input terminal. RF signal monitor terminal. VREF voltage output terminal. Reference supply setting terminal. FE signal monitor terminal. LPF capacitor connection terminal for TE signal. Servo D/A general-purpose output terminal. Controlled by commands from the microcomputer. When not used, set General-purpose I/O terminal 5. them as input terminals and connect General-purpose I/O terminal 6 or to 0 V, or set them as output Subcode reading clock input terminal. terminals and leave open. General-purpose I/O terminal 4. Subcode reading clock input terminal/FG signal input terminal/external emphasis setting terminal. Terminal functions are set by commands. When not used, connect to 0 V. 39* DOUT Output L Digital OUT output terminal. (EIAJ format) 40 TEST Input L Input terminal for test. To be connected to 0 V. 41 LVDD Input — 42 LCHO Output LVDD/2 43 LVSS — — Power supply for Left channel. Left channel D/A converter Left channel output. GND for Left channel. Must be connected to 0 V. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 45 – CD-M10000W/CP-M10000 IC1 VHiLC78645NE1: CD Servo (LC78645NE) (2/2) Pin No. Terminal Name Input/Output Setting in Reset 44 RVSS — — 45 RCHO Output LVDD /2 46 RVDD Input — 47 XVDD Input — 48 XOUT Output — 49 XIN Input — 50 FSX/16MIN Input/Output Input 51 XVSS — — 52* C2F Output H C2 FLAG monitor port. 53* EFLG Output L C1, C2 error corrected monitor port. 54* IGMOUT Output Clock 55 ASLRCK Input — 56 ASDACK Input — 57 ASDFIN Input — 58* LRSY Output L 59* DATACK Output L 60* DATA Output L Left/Right channel data output port. 61 CE Input — Chip enable signal input port. 62 CL Input — Microcomputer 63 DI Input — Interface 64 DO Output (H) 65 *WRQ Output H Interruption signal output. 66 *RES Input — Chip reset signal input port. This port must be set LOW after first applied power on. 67 DRF Output L Focus detection output port. 68 VDD5 Input — Power supply for Microprocessor. 69 VSS — — 70 CONT3 Input/Output Input 71 CONT2 Input/Output Input 72* CONT1 Input/Output Input 73 PDO1 Output — 74 PDO2 Output Input 75 VVSS — — 76 PCKIST Input — 77 VVDD Input — Power supply for internal VCO. 78 FR Input — VCO frequency range adjustment port. 79 LDS Input — LASER power detected signal input port. 80 LDD Output — LASER power control signal output port. Function Right channel D/A converter GND for Right channel. Must be connected to 0 V. Right channel output. Power supply for Right channel. Power supply for crystal oscillator. Crystal Oscillator Connected for the 33.8688 MHz crystal oscillator cement. 7.35 kHz Synchronization signal monitor port. or Clock input port for Digital filter & D/A Crystal Oscillator GND for crystal oscillator. Must be connected to 0 V. 16.9344 MHz output port. Word clock input port. (If this port does not use, must be connect to 0 V.) Anti-shock Bit clock input port. (If this port does not use, must be connect to 0 V.) Left/Right channel data input port. (If this port does not use, must be connect to 0 V.) Word clock output port. Digital data Bit clock output port. Data transfer clock input port. Data input port. Data output port. (N-ch. open drain output.) GND for digital circuit. Must be connected to 0 V. General purpose port 1. Controlled with serial data command from microcomputer. When not used, General purpose input/ General purpose port 2. output terminal 7. set it as the input terminal and open it by connecting to 0 V, or set it as the output terminal General purpose port 3. and open it. Internal VCO control phase comparator output port 1. Internal VCO control phase comparator output port 2. PLL GND for internal VCO. Must be connected to 0 V. PDO output current adjustment resistor connection port. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. Be sure to supply the same potential to each power terminal. (VVDD, ADAVDD, VDD, LVDD, RVDD, XVDD) Terminal witch is controlled by the power terminal (VDD5V) for a microcomputer interface : CE(61 pin), CL(62 pin), DI(63 pin), DO(64 pin), WRQ(65 pin), RES(66 pin), DRF(67 pin) – 46 – CD-M10000W/CP-M10000 LDD LDS FR VVDD PCKIST VVSS PD02 PD01 CONT1 CONT2 CONT3 VSS VDD5 DRF *RES *WRQ DO DI CL CE IC1 VHiLC78645NE1: CD Servo (LC78645NE) 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 SLC0 1 60 DATA SLCIST 2 59 DATACK EFMIN 3 58 LRSY RF 4 57 ASDFIN RFVDD 5 56 ASDACK RFVSS 6 55 ASLRCK FIN1 7 54 IGMOUT FIN2 8 53 EFLG TIN1 9 52 C2F TIN2 10 51 XVSS LC78645NE VREF 11 50 FSX/16MIN REFI 12 49 XIN 35 36 37 FIN1 + – FIN2 + – TIN1 + – TIN2 + – MIX MON14 (3.3V)VSS AGC 38 39 40 TEST 34 VDD 32 33 DOUT 31 MON15 29 30 MON13 28 RF 26 27 TEC 25 MON12 24 TE 23 FE 22 V/1P FDO 21 MON11 41 LVDD FSEQ 42 LCH0 TDO 20 DEFECT 43 LVSS ADAVSS 19 SBCK/FG 44 RVSS ADAVDD 18 SBCK/CONT6 45 RCH0 JITTC 17 CONT5 46 RVDD RFMON 16 CONT4 47 XVDD TE 15 GPDAC TEC 14 SLDO 48 XOUT SPDO FE 13 EQ RFVDD RFVSS PH + – LPF TBAL + BH LPF SW + – LPF + – + – – TBAL LEVEL SET MONI CONT – + REF1 RFMON RAM VREF DETECT TRACK JUMP ADIN ADAVDD ADAVSS SERVO PROCESSOR A/D LDS JITTER DETECT JITTC SLC0 EFMIN SLCIST SW DRF XIN XOUT IGMOUT XVDD XVSS *RES *WRQ CL CE DI DO VDD5V CONT1, 2, 3 CONT4, 5 SBCK/CONT6 VDD RUPTURE DEFECT PLL VCEC FRAME SYNC DETECT,PROTECT INSERT, EFN DECODE CLV,CAV CONTROL SBCK/FG FDO TDO SLDO SPDO GPDAC D/A S/H SLICE LEVEL CONTROL PCK PDO1 PDO2 FR PCKIST VVDD VVSS LDD APC AUTO ADJUST DRF FSEQ V/1P SUBCODE DECODE CRC CLOCK MONITOR SIGNAL SELECTOR VDD VSS MON11~15 GENERATOR RAM ERROR COMMAND CORRECTION INTERFACE AUDIO CD FSK/16MIN C2F EFLG AUDIO OUT GENERAL-PURPOSE PORTS DOUT 8FS DIGITAL FILTER INTERPOLATION MUTE ATTENUATION DEEMPHSIS SERIAL OUT LRSY DATACK DATA 1bit DAC LPF EXTERNAL AUDIO IN ASLRCK ASDQCK ASDFIN RVDD RVSS RCHO LCHO LVDD LVSS TEST Figure 47 BLOCK DIAGRAM OF IC – 47 – CD-M10000W/CP-M10000 IC701 RH-iX0460AWZZ: System Microcomputer (IX0460AW) (1/2) Pin No. Port Name 1 VDD VDD 2 P37 -20 dB ATT 3 P36 NO USE Terminal Name DSA_STB Input/Output Function Input (+) Power supply. Output -20 dB attenuator. Output Input/Output Output GND DSA strube 4 P35 T_BIAS 5 P34 T_T1/T2 Output Tape T1/T2 change. 6 P33 REC/PLAY Output Tape REC/PLAY change. 7 P32 RES OUT Output CD DSP RESET & MPEG microcomputer reset. 8 P31 DRF Input Tape record BIAS. CD RF level detection. 9 P30 WRQ Input CD DSP write request. 10 RESET RESET Input Reset 11 X2 X2 Output Main clock. 12 X1 X1 Input Main clock. 13 VPP/IC XVPP/IC — GND 14* XT2 XT2 — Open 15 P04 SPN Input 16 VDD VDD Input 17 P27 CD CLK Output CD DSP clock. 18 P26 CD DI Output CD DSP commsnd. 19 P25 CD DO Input CD DSP code Q out. 20 P24 CD CE Output CD DSP CE output. 21 P23 CE Output CE output. 22 P22 CLK Output Clock output. 23 P21 DI Output Data output. 24 P20 DO Input (+) Power supply. Data input. 25 AVSS AVSS 26 ANI7 O/C SW Input CD open/Close switch. DISC NO SW Input CD disc number switch. DSA_DATA 27 ANI6 — Tuner span change. Input/Output Analog ground. DS data input. NO USE Input GND. TUNER SM Input Tuner signal meter input. DSA_ACK Input/Output 28 ANI5 SPEANA 2 Input Speana data input 16 kHz. 29 ANI4 SPEANA 1 Input Speana data input 1 kHz. 30 ANI3 SPEANA 0 Input Speana data input 63 kHz. 31-33 ANI2-ANI0 KEY 2-KEY 0 Input Key input. 34 AVDD AVDD Input Analog VDD. 35 AVREF AVREF Input Analog REF voltage. 36 INTP3 P_IN Input Power failure detect. 37 P02 JOG 1 Input JOG volume input 1. 38 P01 JOG 0 Input JOG volume input 0. 39 INTP0 REMOCON Input Remocon input. 40 VSS VSS 41 P74 SMUTE Output System mute control. 42 P73 T_SOL_B Output Tape 2 solenoid control. 43 P72 T_SOL_A Output Tape 1 solenoid control. 44 P71 T_MOTOR Output Tape motor control. 45 P70 TIMER LED Output Timer LED control. 46 VDD VDD Input (+) Power supply. 47* P127 AC RLY_CONT Output AC relay control. 48 P126 SP-RLY Output Speaker output relay control. 49 P125 SP_DET Input — DSA acr. Ground voltage. Speaker output detection. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 48 – CD-M10000W/CP-M10000 IC701 RH-iX0460AWZZ: System Microcomputer (IX0460AW) (2/2) Pin No. Port Name 50 P124 T 1 RUN Input Tape 1 run pulse imput. 51 P123 T 2 RUN Input Tape 2 run pulse input. 52 P122 CD CLAMP SW Input CD changer clamp switch. 53 P121 XBAS-MONST Input X-BASS/Monster ekchange control. L:X-BASS, H:Monster 54 P120 PLAY SW_B Input PLAY switch for T2. 55 P117 FPA Input Tape 2 A-SIDE full proof. 56 P116 FPB Input Tape 2 B-SIDE full proof. 57 P115 MIC SW Input Mic switch. 58 P114 LCK 0 59 P113 DISTOUT Output Destination output. 60 FIP39 NO USE Output GND 61 FIP38 KARAOKE LATCH Output Karaoke latch. 62 FIP37 NO USE Output GND MPEG_POW Output Mpeg power control. 63* FIP36 NO USE Output GND RDS RST/ESS_ACE Output RDS fan reset/Dsa sys acenowledge. 64 FIP35 Terminal Name Input/Output Output Function LED driver lck. NO USE Input GND RDS RDDA/ESS_STB Input RDS transmit data input/dsa strobe. 65* FIP34 NO USE Output GND RDS RDCL/ESS_DI Output RDS clock/Dsa data output. 66 FIP33 NO USE Input GND RDS READY/ESS_DO Input Ready/dsa data input. Input Destination input. 67 P103 DIST3 FIP32 P22 68 P102 DIST2 FIP31 P21 69 P101 DIST1 FIP30 P20 70 P100 DIST0 FIP29 P19 71-78 FIP28-FIP21 P18-P11 79 VLOAD 80-89 FIP20-FIP11 P10-P1 Output FL display driver. 90-100 FIP10-FIP0 Output FL display driver. VLOAD G11-G1 Output FL display driver. Input Destination input. Output FL display driver. Input Destination input. Output FL display driver. Input Destination input. Output FL display driver. Output FL display driver. Input FL driver (-) power supp. -30 V In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 49 – CD-M10000W/CP-M10000 DI CL VDD Yref 2 1 24 23 22 CCB INTERFACE LTRE 6 20 RBASS 0.1uF CONTROL CIRCUIT CONTROL CIRCUIT LBASS 5 0.1uF 21 ROUT CONTROL CIRCUIT LOUT 4 RVref CE 3 LVref YSS IC601 VHiLC75341/-1: Audio Processor (LC75341) 19 RTRE 18 R1N LIN 7 LSEL0 8 Video Tape CD Tuner 17 RSEL0 R1 R2 R3 R4 RSEL0 16 R4 RIN 15 R3 RTRB 14 R2 RBASS 13 R1 ROUT 12 L1 VREF 11 L2 VDD 10 L3 CL 9 L4 24 23 22 21 20 19 18 17 16 15 14 13 7 8 9 LTRE LIN LSEL0 L4 10 11 12 Figure 50 BLOCK DIAGRAM OF IC – 50 – L1 6 L2 5 L3 4 LBASS CE 3 LOUT 2 VSS 1 DI LC75341 CD-M10000W/CP-M10000 ICK1 VHiM65856SP-1: Mic Amp. (M65856SP) (1/2) Pin No. Port Name Input/Output Input Function 1 MIC SW 2 MCLKCONT — Clock Control. Controls built-in clock generation circuit with external R. 3 VALC — ALC operating voltage setting terminal. To set ALC operating voltage according to applied voltage. 4 MIC1 IN 5* ALC1 6* MIC1NFIN Input 7* MIC1 OUT Output 8 MIC1 VOLIN Input Microphone 1 volume input. To connect capacitor to reduce noise generated at time of volume change. 9 MIC2 IN Input Microphone 2 input. To connect MIC 2. 10 ALC2 11 MIC2 NFIN Input 12 MIC2 OUT Output 13 MIC2 VOLIN 14 MICOUT Output 15 LPF1IN1 Input Low pass filter 1 input 1. Pre-filter before A/D convertor for digital delay. 16 LPF1 IN2 Input Low pass filter 1 input 2. Pre-filter before A/D convertor for digital delay. 17 LPF1 OUT Output Low pass filter 1 output. Pre-filter before A/D convertor for digital delay. 18 AD INTOUT Output A/D integrator output. Composes D/A conversion integrator with external capacitor. 19 AD INTIN Input A/D integrator input. Composes D/A conversion integrator with external capacitor. 20 ADCONT — A/D control. To determine adaptive time constant of A/D convertor with ADM system. 21 REF — Reference power output. To connect 1/2 Vcc output and filter capacitor. Ground. Input — — Input Microphone SW L: MIC OFF, H: MIC ON Microphone 1 input. To connect MIC 1. ALC1 control. To connect ALC1 attack/recovery time setting capacitor. Microphone 1 negative feedback input. To connect low cut-off frequency of MIC1 amplifier setting capacitor. Microphone 1 output. ALC2 control. To connect ALC2 attack/recovery time setting capacitor. Microphone 2 negative feedback input. To connect low cut-off frequency of MIC2 amplifier setting capacitor. Microphone 2 output. Microphone 2 volume input. To connect capacitor to reduce noise generated at time of volume change. Microphone output. Mixing output of MIC 1 and MIC 2. 22 GND — 23 VCC Input 24 DACONT — 25 DAINTIN Input D/A Integrator input. Composes D/A conversion integrator with external capacitor. 26 DAINTOUT Output D/A Integrator output. Composes D/A conversion integrator with external capacitor. 27 LPF2IN1 Input Low pass filter 2 input 1. Post-filter after D/A convertor for digital delay. 28 LPF2IN2 Input Low pass filter 2 input 2. Post-filter after D/A convertor for digital delay. 29 LPF2OUT Output Low pass filter 2 output. Post-filter after D/A convertor for digital delay. 30 VOLIN 31 L IN Input Lch line input. 32 R IN Input Rch line input. Input Power supply. D/A control. To determine adaptive time constant of D/A convertor with ADM system . Echo effect/Echo feed back volume input. To connect capacitor to reduce noise generated at time of volume change. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 51 – CD-M10000W/CP-M10000 ICK1 VHiM65856SP-1: Mic Amp. (M65856SP) (2/2) Pin No. Port Name Input/Output Input Function Monaural input for external KEYCONTROL IC. Input/Output interface terminal for external KEYCONTROL IC. 33* KEYCONIN 34* SOURCEOUT Output Monaural input for external KEYCONTROL IC. Input/Output interface terminal for external KEYCONTROL IC. 35 R OUT Output Rch mixing output. 36 L OUT Output 37 VCF IL — 38* PS1 Input Phase shift input 1. Determines a constant at time of phase shift. 39* PS2 Input Phase shift input 2. Determines a constant at time of phase shift. 40 LATCH Input Latch input via serial bus. 41 CLOCK Input Clock input via serial bus. 42 DATA Input Data input via serial bus. Lch mixing output. Vocal cut filter. Processes frequencies lower then the vocal band. LATCH PS2 PS1 VCFIL LOUT ROUT SOURCEOUT KEYCONIN RIN LIN VOLIN LPF2OUT LPF2IN2 LPF2IN1 DAINTOUT DAINTIN DACONT 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 PHASE SHIFTER SURROUND µ-COM I/F LPF (L,R)/2 L GND CLOCK 42 VCC DATA In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. 23 22 VCC GND D/A R STEREO MIC SW ECHO VOL ECHO F.BVOL 16kbit SRAM MAIN LOGIC MIC VOL MCLK 1/ZVcc MIC VOL ALC 15 16 17 18 19 20 21 REF MIC1OUT 14 ADCONT MIC1NFIN 13 ADINTIN ALC1 12 ADINTOUT MIC1IN 11 LPF1OUT VALC 10 LPF1IN2 MCLKCONT 9 LPF1IN1 MIC SW 8 MICOUT 7 MIC2VOLIN 6 MIC2OUT 5 MIC2NFIN 4 ALC2 3 MIC2IN 2 MIC1VOLIN 1 ND LPF ALC Figure 52 BLOCK DIAGRAM OF IC – 52 – CD-M10000W/CP-M10000 FL DISPLAY FL701 VVKBJ11LM02T1: FL Display 11G S1 B21 B20 B19 B18 B17 B16 B15 S1 B7 B6 B5 B4 10G S1 B3 B2 B1 1G 2G B8 B9 B10 B11 B12 B13 B14 3G 4G 9G S1 S1 B7 B6 B5 B4 B3 B2 B1 5G 6G 7G S1 8G B1 B2 B3 B4 B5 B6 B7 S4 S5 S2 S3 a j h f g col e k b m n r p d c Dp 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G P1 S1 S1 S1 Dp Dp Dp Dp Dp Dp Dp Dp P2 B1 B1 B1 d d d d d d d d P3 B2 B2 B2 c c c c c c c c P4 B3 B3 B3 n n n n n n n n P5 B4 B4 B4 p p p p p p p p P6 B5 B5 B5 r r r r r r r r P7 B6 B6 B6 e e e e e e e e P8 B7 B7 B7 m m m m m m m m g g g g g g g g P9 B8 P10 B9 P11 B10 b b b b b b b b P12 B11 k k k k k k k k P13 B12 j j j j j j j j h h h h h h h h f f f f f f f f P14 B13 col (Hiper) (Lower) P15 B14 P16 B15 a a a a a a a a P17 B16 S2 S2 S2 S2 S2 S2 S2 S2 P18 B17 S3 S3 S3 S3 S3 S3 S3 S3 P19 B18 S4 S4 S4 S4 S4 S4 S4 S4 P20 B19 S5 S5 S5 S5 S5 S5 S5 S5 P21 B20 P22 B21 – 53 – CD-M10000W/CP-M10000 –– MEMO –– – 54 – CD-M10000W/CP-M10000 PARTS GUIDE MINI COMPONENT SYSTEM MODEL CD-M10000W SPEAKER SYSTEM MODEL CP-M10000 “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call Toll-Free; 1-800-BE-SHARP MARK: SPARE PARTS-DELIVERY SECTION Explanation of capacitors/resistors parts codes Capacitors Resistors VCC ....................... Ceramic type VCK ........................ Ceramic type VCT ........................ Semiconductor type VC • • MF ............... Cylindrical type (without lead wire) VC • • MN ............... Cylindrical type (without lead wire) VC • • TV ................ Square type (without lead wire) VC • • TQ ............... Square type (without lead wire) VC • • CY ............... Square type (without lead wire) VC • • CZ ............... Square type (without lead wire) VC • • • • • • • • • J .. The 13th character represents capacity difference. ("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%, "C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.) VRD ....................... Carbon-film type VRS ........................ Carbon-film type VRN ....................... Metal-film type VR • • MF ............... Cylindrical type (without lead wire) VR • • MN ............... Cylindrical type (without lead wire) VR • • TV ................ Square type (without lead wire) VR • • TQ ............... Square type (without lead wire) VR • • CY ............... Square type (without lead wire) VR • • CZ ............... Square type (without lead wire) VR • • • • • • • • • J .. The 13th character represents error. ("J" ±5%, "F" ±1%, "D" ±0.5%.) If there are no indications for the electrolytic capacitors, error is ±20%. If there are no indications for other parts, the resistors are ±5% carbon-film type. NOTE: Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace parts with specified ones for maintaining the safety and performance of the set. – 55 – CD-M10000W/CP-M10000 NO. PRICE RANK PART CODE DESCRIPTION CD-M10000W INTEGRATED CIRCUITS IC1 IC2 VHILC78645NE1 VHIM63001FP-1 J J IC101 VHIAN7345K/-1 J IC301 IC302 IC303 VHITA7358AP-1 VHILC72131/-1 VHILA1832S/-1 J J J IC401 IC601 IC701 VHIKIA4558P-1 VHILC75341/-1 RH-IX0460AWZZ J J J IC702 IC703,704 IC860 IC901 IC902 ICK1 ICK2 VHIBU2092F/-1 VHIKIA4558P-1 VHIKIA4558P-1 VHISTK41217-1 VHISTK41223-1 VHIM65856SP-1 VHIKIA4558P-1 J J J J J J J AY CD Servo,LC78645NE AX Focus/Tracking/Spin/Sled Driver, M63001FP AM Playback and Record/Playback Amp.,AN7345K AG FM Front End,TA7358AP AP PLL (Tuner),LC72131 AN FM IF Det./FM Mpx./AM IF, LA1832S AC Ope Amp.,KIA4558P AM Audio Processor,LC75341 AM System Microcomputer, IX0460AW AM Input/Output Expander,BU2092F AC Ope Amp.,KIA4558P AC Ope Amp.,KIA4558P Power Amp.,STK41217 Power Amp.,STK41223 AX Mic Amp.,M65856SP AC Ope Amp.,KIA4558P TRANSISTORS Q1 Q2 Q3 Q103~106 Q107,108 Q109 Q110,111 Q121,122 Q124 Q126 Q128 Q302 Q360 Q603~606 Q701~703 Q704,705 Q708 Q709 Q803 Q850 Q851 Q852 VSKTA1266GR-1 VSKTC3203Y/-1 VSKRC102M//-1 VS2SC1845F/-1 VSKTC3199GR-1 VSKTA1266GR-1 VSKRC104M//-1 VSKTC3199GR-1 VS2SA1015GR-1 VSKRC104M//-1 VSKTC3203Y/-1 VSKTC3194Y/-1 VSKTA1266GR-1 VSKTC3199GR-1 VSKTC3199GR-1 VSKTA1273Y/-1 VSKTA1273Y/-1 VSKRC102M//-1 VSKTA1274Y/-1 VSKTC2026//-1 VHIKIA7810AP1 VHIKIA7805AP1 J J J J J J J J J J J J J J J J J J J J J J AB AC AC AC AB AB AC AB AB AC AC AD AB AB AB AE AE AC AE AF AF AF Q862,863 Q864 Q865 Q901~905 Q907 Q908 Q911,912 QFM906 QK1 VSKTC3199GR-1 VSKRC102M//-1 VSKTC3199GR-1 VSKTC3199GR-1 VSKRA107M//-1 VSKTC3199GR-1 VSKTC3199GR-1 VSKTC3203Y/-1 VSKTC3203Y/-1 J J J J J J J J J AB AC AB AB AE AB AB AC AC Silicon,PNP,KTA1266 GR Silicon,NPN,KTC3203 Y Digital,NPN,KRC102 M Silicon,NPN,2SC1845 F Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1266 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3199 GR Silicon,PNP,2SA1015 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3203 Y Silicon,NPN,KTC3194 Y Silicon,PNP,KTA1266 GR Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1273 Y Silicon,PNP,KTA1273 Y Digital,NPN,KRC102 M Silicon,PNP,KTA1274 Y Silicon,NPN,KTC2026 Voltage Regulator,KIA7810AP Constant Voltage Regulator, KIA7805AP Silicon,NPN,KTC3199 GR Digital,NPN,KRC102 M Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3199 GR Digital,PNP,KRA107 M Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3203 Y Silicon,NPN,KTC3203 Y VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDD10XB60F-1 VHDDS1N404S-1 VHDDS1N404S-1 VHDDS1N404S-1 VHDDS1SS133-1 VHDDS1N404S-1 VHDDS1N404S-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1N404S-1 J J J J J J J J J J J J J J J J J J AB AB AB AB AB AB AB AL AB AB AB AB AB AB AB AB AB AB Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,D10XB60F Silicon,DS1N404S Silicon,DS1N404S Silicon,DS1N404S Silicon,DS1SS133 Silicon,DS1N404S Silicon,DS1N404S Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1N404S DIODES D1,2 D301,302 D305 D701~704 D712,713 D718 D720~723 D801~804 D805,806 D809 D810 D861~863 D864 D901,902 D903~906 D908 D913 D914,915 PRICE RANK NO. PARTS CODE D919 DFM907 DFM920,921 DK1,2 DT701 DT703 LED701,702 LED703,704 LED705 LED706~708 LED722 ZD1 ZD2 ZD351 ZD401,402 ZD701 ZD801 ZD802 ZD804 ZD851 ZD901,902 ZD903,904 ZDK1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHP4204UYT7-1 VHP31URT21+-1 VHP4204UYT7-1 VHP4204UGT7-1 VHP4204SRT7-1 VHEDZ3R3BSB-1 VHEDZ3R9BSB-1 VHEDZ5R1BSB-1 VHEMTZJ150C-1 VHEMTZJ6R2C-1 VHEDZ300BSB-1 VHEDZ6R2BSA-1 VHEDZ6R2BSA-1 VHEDZ3R9BSB-1 VHEDZ120BSB-1 VHEDZ150BSB-1 VHEMTZJ5R6B-1 J J J J J J J J J J J J J J J J J J J J J J J AB AB AB AB AB AB AD AD AD AD AD AB AC AC AC AC AB AB AB AC AB RFILR0008AWZZ RFILF0124AFZZ RFILF0003AWZZ RFILA0009AWZZ J J J J AE AD AK AE Band Pass Filter FM IF,10.7 MHz FM IF AM IF RCILB0065AWZZ RCILI0017AWZZ RCILA0052AWZZ RCILB0067AWZZ RCILI0019AWZZ RTRNP0397AWZZ RTRNP0390AWZZ J J J J J J J AC AB AE AD AD FM OSC. FM IF AM Tracking AM OSC. AM IF Power [MAIN] Power with CNS801/CNS802 [SUB] VP-XHR82K0000 VP-MK331K0000 RCILR0056AWZZ VP-DH101K0000 RCILZ0024AFZZ J J J J J AC AB AB AB 0.82 µH,Choke 330 µH,Choke FM RF 100 µH,Choke 3 µH,Choke J AF 20 kohms (B) [Mic Volume] DESCRIPTION Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 LED,Yellow,4204UYT7 LED,Red,31URT21 LED,Yellow,4204UYT7 LED,Green,4204UGT7 LED,Red,4204SRT7 Zener,3.3V,DZ3.3BSB Zener,3.9V,DZ3.9BSB Zener,5.1V,DZ5.1BSB Zener,15V,MTZJ15C Zener,6.2V,MTZJ6.2C Zener,30V,DZ30BSB Zener,6.2V,DZ6.2BSA Zener,6.2V,DZ6.2BSA Zener,3.9V,DZ3.9BSB Zener,12V,DZ12BSB Zener,15V,DZ15BSB AD Zener,5.6V,MTZJ5.6B FILTERS BF301 CF303 CF351 CF352 TRANSFORMERS T301 T302 T303 T306 T351 1 T801 1 T802 COILS L1 L104 L312 L351,352 L901~904 VARIABLE RESISTOR VRK1 92LVRR1674A VARIABLE CAPACITORS VD301 VD302,303 VHCSVC348S/-1 VHCKDV147B/-1 J J AK Variable Capacitance,SVC348S AH Variable Capacitance,KDV147B J J J J AF AF AF AH Crystal,456 kHz Crystal,4.5 MHz Ceramic,33.8688 MHz Crystal,4.1943 MHz J AL Posistor J J J J J J J AB AA AB AA AB AB AA 47 µF,25V,Electrolytic 0.01 µF,16V 47 µF,25V,Electrolytic 0.001 µF,50V 0.047 µF,50V,Mylar 0.1 µF,16V 0.0047 µF,16V VIBRATORS X351 X352 XL1 XL701 92LCRSTL1425A RCRSP0019AWZZ RCRM-0041AWZZ RCRSP0003AWZZ THERMISTOR 1 P901 VHHZPP221A+-1 CAPACITORS C1 C2 C3 C4 C5 C6 C8 –1– VCEAZA1EW476M VCTYMN1CY103N VCEAZA1EW476M VCKYMN1HB102K VCQYKA1HM473J VCTYPA1CX104K VCTYMN1CX472K CD-M10000W/CP-M10000 NO. C9 C10 C11 C12 C13 C14 C16 C18 C23,24 C25,26 C27 C28 C30 C32~34 C35 C36 C37 C38 C39 C40 C41 C42 C44 C48 C49 C50 C51 C101,102 C105,106 C107,108 C111~114 C115,116 C117,118 C119,120 C121,122 C123,124 C127 C128 C131,132 C133,134 C135,136 C139,140 C141,142 C145 C146 C150 C151 C152 C153 C154 C303 C304 C305 C306 C307 C308 C309 C310 C311 C312 C313 C314,315 C316 C317 C318 C323 C324 C330 C331 C332 C334 C335 C338 C342 C350,351 C352 C353,354 C355 C356 C357 C358 C361 PART CODE VCEAZA1AW107M VCEAZA1HW106M VCEAZA1HW224M VCCSPA1HL101J VCTYMN1EF223Z RC-EZY107AF1A VCEAEA0JW337M VCEAZA1AW107M RC-EZY106AF1H VCTYMN1CX152K VCTYMN1EF223Z VCKYMN1HB101K VCKYMN1HB101K VCKYMN1HB101K VCQYKA1HM473J VCEAZA1HW225M VCTYPA1CX104K VCTYMN1CY103N VCEAZA1AW107M VCEAZA0JW227M VCEAZA1AW107M VCTYMN1CY103N VCKYMN1HB102K VCKZPA1HF223Z VCEAZA1EW476M VCCCPA1HH220J VCTYBT1EF223Z VCKYMN1HB561K VCKYMN1HB181K VCKYMN1HB561K VCKYMN1HB331K VCEAZA1EW107M VCTYPA1EX333K VCKYMN1HB561K VCEAZA1HW105M VCTYPA1EX222K VCTYMN1EF223Z VCEAZA1HW335M VCKYMN1HB271K VCEAZA1EW226M VCTYPA1CX223K VCTYMN1CX332K VCEAZA1EW476M VCEAZA1HW226M VCEAZA1AW227M VCQPKA2AA822J VCQYKA1HM393K VCEAZA1EW476M VCEAZA1CW107M VCKYPA1HF473Z VCCCMN1HH100J VCTYMN1CY103N VCCCMN1HH4R7C VCTYMN1EF223Z VCEAZA1CW106M VCCCMN1HH4R7C VCKYMN1HB102K VCCCMN1HH150J VCCSMN1HL180J VCTYMN1EF223Z VCCCMN1HH220J VCTYMN1CX472K VCTYMN1EF223Z VCKYMN1HB102K VCKYMN1HB101K VCTYMN1EF223Z VCCUMN1HJ8R2D VCCUMN1HJ150J VCKYPA1HF473Z VCTYMN1EF223Z VCCUMN1HJ220J VCKYMN1HB561K VCKYMN1HB102K VCTYMN1EF223Z VCTYMN1EF223Z VCEAZA1CW106M VCTYMN1EF223Z VCCSMN1HL220J VCKYMN1HB102K VCEAZA1HW225M VCEAZA1HW105M VCTYMN1EF223Z J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J PRICE RANK DESCRIPTION AB AB AB AA AA AB AD AB AB AA AA AA AA AA AB AB AB AA AB AC AB AA AA AA AB AA AA AA AA AA AA AB AA AA AB AA AA AB AA AB AA AA AB AB AC AA AB AB AC AB AA AA AA AA AC AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AC AA AA AA AB AB AA 100 µF,10V,Electrolytic 10 µF,50V,Electrolytic 0.22 µF,50V,Electrolytic 100 pF,50V 0.022 µF,25V 100 µF,10V,Electrolytic 330 µF,6.3V,Electrolytic 100 µF,10V,Electrolytic 10 µF,50V,Electrolytic 0.0015 µF,16V 0.022 µF,25V 100 pF,50V 100 pF,50V 100 pF,50V 0.047 µF,50V,Mylar 2.2 µF,50V,Electrolytic 0.1 µF,16V 0.01 µF,16V 100 µF,10V,Electrolytic 220 µF,6.3V,Electrolytic 100 µF,10V,Electrolytic 0.01 µF,16V 0.001 µF,50V 0.022 µF,50V 47 µF,25V,Electrolytic 22 pF (CH),50V 0.022 µF,25V 560 pF,50V 180 pF,50V 560 pF,50V 330 pF,50V 100 µF,25V,Electrolytic 0.033 µF,25V 560 pF,50V 1 µF,50V,Electrolytic 0.0022 µF,25V 0.022 µF,25V 3.3 µF,50V,Electrolytic 270 pF,50V 22 µF,25V,Electrolytic 0.022 µF,16V 0.0033 µF,16V 47 µF,25V,Electrolytic 22 µF,50V,Electrolytic 220 µF,10V,Electrolytic 0.0082 µF,100V,Polypropylene 0.039 µF,50V,Mylar 47 µF,25V,Electrolytic 100 µF,16V,Electrolytic 0.047 µF,50V 10 pF (CH),50V 0.01 µF,16V 4.7 pF (CH),50V 0.022 µF,25V 10 µF,16V,Electrolytic 4.7 pF (CH),50V 0.001 µF,50V 15 pF (CH),50V 18 pF,50V 0.022 µF,25V 22 pF (CH),50V 0.0047 µF,16V 0.022 µF,25V 0.001 µF,50V 100 pF,50V 0.022 µF,25V 8.2 pF (UJ),50V 15 pF (UJ),50V 0.047 µF,50V 0.022 µF,25V 22 pF (UJ),50V 560 pF,50V 0.001 µF,50V 0.022 µF,25V 0.022 µF,25V 10 µF,16V,Electrolytic 0.022 µF,25V 22 pF,50V 0.001 µF,50V 2.2 µF,50V,Electrolytic 1 µF,50V,Electrolytic 0.022 µF,25V NO. –2– C362 C363 C364 C365 C366 C367,368 C369 C370~372 C373,374 C380 C381 C382 C385 C386 C387 C388 C391 C392 C393 C394 C395 C396 C397 C398 C399 C432 C433 C434 C435 C436 C437 C438,439 C440 C441 C442,443 C444 C445 C446~449 C450,451 C602 C605 C606 C607~610 C611,612 C613,614 C615,616 C617 C618 C619,620 C621,622 C623~630 C631,632 C635,636 C641,642 C701 C702 C714 C715 C719 C720,721 C723 C724 C725 C726 C727 C728 C729 C732 C733 C809,810 C811~814 C815,816 C817,818 C819 C821 C822,823 C824 C850 C852 C855 C856 C859 PRICE RANK PARTS CODE VCEAZA1HW335M VCTYMN1EF223Z VCEAZA1HW225M VCKYPA1HF223Z VCKYMN1HB102K VCEAZA1HW105M VCCUMN1HJ270J VCEAZA1HW105M VCTYPA1CX183K VCEAZA1CW106M VCCCMN1HH120J VCCCMN1HH150J VCTYMN1CY103N VCKYMN1HB331K VCTYMN1EF223Z VCKYMN1HB102K VCEAZA1CW476M VCKYMN1HB102K VCEAZA1HW105M VCEAZA1CW476M VCTYMN1EF223Z VCEAZA1AW107M VCTYMN1EF223Z VCEAZA1AW107M VCTYMN1EF223Z VCFYHA1HA184J VCQYKA1HM154K VCCCPA1HH101J VCQYKA1HM154K VCFYHA1HA184J VCCCPA1HH101J VCEAZA1HW106M VCEAZA1HW476M VCKYPA1HF223Z VCEAZA1HW225M VCEAZA1EW476M VCKYPA1HF223Z VCQYKA1HM104K VCCCPA1HH221J VCEAZA1EW226M VCEAZA1HW475M VCEAZA1CW107M VCFYHA1HA224J VCTYMN1CX152K VCEAZA1HW106M VCKYMN1HB102K VCEAZA1HW225M VCEAZA1HW226M VCEAZA1HW105M VCEAZA1HW106M VCEAZA1HW105M VCKYMN1HB391K VCKYMN1HB102K VCCSPA1HL470J VCEAZA1EW476M VCTYMN1EF223Z VCEAZA1HW476M VCEAZA1HW226M VCEAZA1EW476M VCKYMN1HB102K VCCSMN1HL150J VCCSMN1HL180J VCTYMN1EF223Z VCEAZA1AW227M VCKYBT1HB471K VCTYMN1CY103N VCEAZA1HW335M VCTYMN1EF223Z VCEAZA1EW476M VCQYKU2AM224K VCFYDA1HA224J VCQYKU2AM224K VCFYDA1HA224J VCEAZA1HW226M VCEAZV1JW227M VCEAZA1HW476M VCEAZA1VW107M RC-EZ0060AWZZ VCQYKA1HM473K VCQYKA1HM104K VCKYPA1HB101K VCQYKA1HM102K J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AB AA AB AB AA AB AA AB AA AC AA AA AA AA AA AA AB AA AB AB AA AB AA AB AA AC AB AA AB AC AA AB AB AB AB AB AB AB AA AB AB AC AC AA AB AA AB AB AB AB AB AA AA AA AB AA AB AB AB AA AA AA AA AC AA AA AB AA AB AB AB AB AB AB AC AB AC AD AB AB AA AA DESCRIPTION 3.3 µF,50V,Electrolytic 0.022 µF,25V 2.2 µF,50V,Electrolytic 0.022 µF,50V 0.001 µF,50V 1 µF,50V,Electrolytic 27 pF (UJ),50V 1 µF,50V,Electrolytic 0.018 µF,16V 10 µF,16V,Electrolytic 12 pF (CH),50V 15 pF (CH),50V 0.01 µF,16V 330 pF,50V 0.022 µF,25V 0.001 µF,50V 47 µF,16V,Electrolytic 0.001 µF,50V 1 µF,50V,Electrolytic 47 µF,16V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 0.022 µF,25V 0.18 µF,50V,Thin Film 0.15 µF,50V,Mylar 100 pF (CH),50V 0.15 µF,50V,Mylar 0.18 µF,50V,Thin Film 100 pF (CH),50V 10 µF,50V,Electrolytic 47 µF,50V,Electrolytic 0.022 µF,50V 2.2 µF,50V,Electrolytic 47 µF,25V,Electrolytic 0.022 µF,50V 0.1 µF,50V,Mylar 220 pF (CH),50V 22 µF,25V,Electrolytic 4.7 µF,50V,Electrolytic 100 µF,16V,Electrolytic 0.22 µF,50V,Thin Film 0.0015 µF,16V 10 µF,50V,Electrolytic 0.001 µF,50V 2.2 µF,50V,Electrolytic 22 µF,50V,Electrolytic 1 µF,50V,Electrolytic 10 µF,50V,Electrolytic 1 µF,50V,Electrolytic 390 pF,50V 0.001 µF,50V 0.0033 µF,16V 47 µF,25V,Electrolytic 0.022 µF,25V 47 µF,50V,Electrolytic 22 µF,50V,Electrolytic 47 µF,25V,Electrolytic 0.001 µF,50V 15 pF,50V 18 pF,50V 0.022 µF,25V 220 µF,10V,Electrolytic 470 pF,50V 0.01 µF,16V 3.3 µF,50V,Electrolytic 0.022 µF,25V 47 µF,25V,Electrolytic 0.22 µF,100V,Mylar 0.22 µF,50V,Polyester 0.22 µF,100V,Mylar 0.22 µF,50V,Polyester 22 µF,50V,Electrolytic 220 µF,63V,Electrolytic 47 µF,50V,Electrolytic 100 µF,35V,Electrolytic 2200 µF,35V,Electrolytic 0.047 µF,50V,Mylar 0.1 µF,50V,Mylar 100 pF,50V 0.001 µF,50V,Mylar CD-M10000W/CP-M10000 NO. C860 C861 C863,864 C865 C866 C867 C899 C901,902 C903,904 C905 C906~909 C911,912 C913,914 C915,916 C917,918 C919,920 C921,922 C923,924 C925 C927~930 C932 C956,957 C978,979 C980,981 C982 C983 C984,985 C986 C987 C988 C989~992 C993 C995 C997 C998 C999 CFM943 CFM947 CK1 CK2 CK3 CK6 CK7 CK8 CK9 CK10,11 CK12 CK13 CK14 CK15 CK16 CK17 CK18 CK19 CK20 CK21 CK22 CK23 CK24~26 CK29,30 CK31 CK32 CK33~35 CK41 CK42 CK43,44 CK45,46 CK47,48 CK49,50 CK51,52 CK53 CK72 CS701,702 CS703,704 CS705 CS706,707 CS708,709 CS710 CS711,712 CS713 CT1,2 PRICE RANK PART CODE RC-EZ0060AWZZ VCTYMN1EF223Z VCEAZA1HW226M VCEAZA1EW476M VCKYMN1HB102K VCEAZA1HW105M VCEAZA1HW106M RC-EZ0029AWZZ RC-EZ0061AWZZ VCEAZA1HW104M VCFYDA1HA224J VCKYPA1HB821K VCCSPA1HL470J VCEAZA1EW475M VCFYHA1HA224J VCEAZV2AW107M VCEAZA1HW107M VCQYKA1HM223J VCEAZA1HW476M VCFYHA1HA224J VCFYHA1HA224J VCEAZV2AW107M VCEAZW2AW338M RC-GZW478AF1H VCKYPA1HB821K VCCSPA1HL470J VCEAZA1HW476M VCKYPA1HB821K VCCSPA1HL470J VCEAZA1HW104M VCEAZV2AW107M VCEAZA1HW107M VCEAZA1HW107M VCEAZA1HW104M VCEAZA1HW476M VCFYHA1HA224J VCEAZA1HW476M VCEAZA1HW106M VCTYPA1CX103K VCFYHA1HA474J VCKYBT1HB102K VCFYDA1HA104J VCFYHA1HA474J RC-EZY475AF1H RC-EZY225AF1H VCFYDA1HA104J RC-EZY225AF1H VCTYPA1CX472K VCTYPA1CX102K VCFYDA1HA683J VCFYHA1HA224J VCEAEA1AW227M VCEAEA1CW107M VCTYBT1EF223Z VCFYHA1HA224J VCFYDA1HA683J VCTYPA1CX472K VCKYPA1HB102K VCEAZA1HW225M VCEAZA1HW225M VCFYDA1HA154J VCTYPA1EX472K VCCSBT1HL470J VCEAZA1CW107M VCTYBT1EF223Z VCEAZA1EW476M RC-EZY225AF1H VCCSPA1HL221J VCCSPA1HL101J VCEAZA1HW105M VCEAZA1HW476M VCEAZA1CW107M VCKYMN1HB271K VCTYMN1CX272K VCTYMN1EF223Z VCEAZA1HW225M VCTYMN1EF223Z VCEAZA1HW225M VCTYMN1CX682K VCTYMN1EF223Z VCTYPA1CX102K J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AD AA AB AB AA AB AB AN AE AB AB AA AA AC AC AE AC AB AB AC AC AE AR AH AA AA AB AA AA AB AE AC AC AB AB AC AB AB AA AD AA AB AD AB AB AB AB AA AA AB AC AB AB AA AC AB AA AA AB AB AB AA AA AC AA AB AB AA AA AB AB AC AA AA AA AB AA AB AA AA AA DESCRIPTION 2200 µF,35V,Electrolytic 0.022 µF,25V 22 µF,50V,Electrolytic 47 µF,25V,Electrolytic 0.001 µF,50V 1 µF,50V,Electrolytic 10 µF,50V,Electrolytic 3300 µF,71V,Electrolytic 4700 µF,35V,Electrolytic 0.1 µF,50V,Electrolytic 0.22 µF,50V,Polyester 820 pF,50V 47 pF,50V 4.7 µF,25V,Electrolytic 0.22 µF,50V,Polyester 100 µF,100V,Electrolytic 100 µF,50V,Electrolytic 0.022 µF,50V,Mylar 47 µF,50V,Electrolytic 0.22 µF,50V,Thin Film 0.22 µF,50V,Thin Film 100 µF,100V,Electrolytic 3300 µF,100V,Electrolytic 4700 µF,50V,Electrolytic 820 pF,50V 47 pF,50V 47 µF,50V,Electrolytic 820 pF,50V 47 pF,50V 0.1 µF,50V,Electrolytic 100 µF,100V,Electrolytic 100 µF,50V,Electrolytic 100 µF,50V,Electrolytic 0.1 µF,50V,Electrolytic 47 µF,50V,Electrolytic 0.22 µF,50V,Thin Film 47 µF,50V,Electrolytic 10 µF,50V,Electrolytic 0.01 µF,16V 0.47 µF,50V,Thin Film 0.001 µF,50V 0.1 µF,50V,Thin Film 0.47 µF,50V,Thin Film 4.7 µF,50V,Electrolytic 2.2 µF,50V,Electrolytic 0.1 µF,50V,Thin Film 2.2 µF,50V,Electrolytic 0.0047 µF,16V 0.001 µF,16V 0.068 µF,50V,Polyester 0.22 µF,50V,Thin Film 220 µF,10V,Electrolytic 100 µF,16V,Electrolytic 0.022 µF,25V 0.22 µF,50V,Thin Film 0.068 µF,50V,Polyester 0.0047 µF,16V 0.001 µF,50V 2.2 µF,50V,Electrolytic 2.2 µF,50V,Electrolytic 0.15 µF,50V,Polyester 0.0047 µF,25V 47 pF,50V 100 µF,16V,Electrolytic 0.022 µF,25V 47 µF,25V,Electrolytic 2.2 µF,50V,Electrolytic 220 pF,50V 100 pF,50V 1 µF,50V,Electrolytic 47 µF,50V,Electrolytic 100 µF,16V,Electrolytic 270 pF,50V 0.0027 µF,16V 0.022 µF,25V 2.2 µF,50V,Electrolytic 0.022 µF,25V 2.2 µF,50V,Electrolytic 0.0068 µF,16V 0.022 µF,25V 0.001 µF,16V NO. PRICE RANK PARTS CODE DESCRIPTION RESISTORS R1,2 R3 R4,5 R6 R7 R9 R10 R11 R12 R13~17 R18 R19 R20 R22 R23 R24,25 R26,27 R28,29 R30 R31~38 R39,40 R41 R42 R43 R44 R45,46 R47 R49 R65 1 R80 R101 R102 R103,104 R105,106 R107,108 R109,110 R111 R112 R113,114 R115 R117,118 R119 R120 R121,122 R123,124 R125,126 R131,132 R134 R135,136 R137,138 R139,140 R141,142 R145,146 R153 R154 R155 R156 R157 R158 R160 R162 R164 R166 R167 R168 R169~174 R302 R309 R311 R313 R314 R316 R322 R323 R325 R327 R336 R350 –3– VRD-MN2BD000C VRD-ST2CD123J VRD-ST2CD333J VRD-ST2CD123J VRD-ST2CD333J VRD-ST2CD470J VRD-ST2CD3R3J VRD-ST2CD273J VRD-MN2BD103J VRD-MN2BD331J VRD-MN2BD102J VRD-ST2CD102J VRD-ST2CD153J VRD-ST2CD103J VRD-ST2CD101J VRD-MN2BD221J VRD-MN2BD222J VRD-MN2BD103J VRD-ST2CD222J VRD-ST2CD822J VRD-ST2CD102J VRD-MN2BD681J VRD-MN2BD123J VRD-MN2BD122J VRD-MN2BD221J VRD-ST2CD123J VRD-MN2BD471J VRD-MN2BD101J VRD-ST2EE1R0J VRD-ST2CD332J VRG-ST2EG3R3J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD222J VRD-MN2BD332J VRD-MN2BD473J VRD-MN2BD472J VRD-ST2CD153J VRD-MN2BD153J VRD-MN2BD103J VRD-MN2BD472J VRD-ST2CD102J VRD-ST2CD560J VRD-MN2BD560J VRD-MN2BD104J VRD-MN2BD392J VRD-MN2BD562J VRD-MN2BD123J VRD-MN2BD683J VRD-MN2BD472J VRD-MN2BD682J VRD-MN2BD152J VRD-MN2BD101J VRD-MN2BD103J VRD-MN2BD103J VRD-ST2CD103J VRD-ST2EE151J VRD-MN2BD224J VRD-ST2CD224J VRD-ST2EE221J VRD-ST2EE820J VRD-MN2BD473J VRD-ST2CD472J VRD-MN2BD223J VRD-MN2BD473J VRD-ST2CD4R7J VRD-MN2BD102J VRD-MN2BD100J VRD-ST2CD103J VRD-MN2BD104J VRD-MN2BD333J VRD-ST2CD220J VRD-MN2BD472J VRD-MN2BD681J VRD-MN2BD683J VRD-MN2BD473J VRD-MN2BD330J VRD-MN2BD103J VRD-MN2BD272J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 0 ohm,Jumper,ø1.4×3.5mm,Ivory 12 kohms,1/6W 33 kohms,1/6W 12 kohms,1/6W 33 kohms,1/6W 47 ohms,1/6W 3.3 ohms,1/6W 27 kohms,1/6W 10 kohm,1/8W 330 ohms,1/8W 1 kohm,1/8W 1 kohm,1/6W 15 kohms,1/6W 10 kohm,1/6W 100 ohm,1/6W 220 ohms,1/8W 2.2 kohms,1/8W 10 kohm,1/8W 2.2 kohms,1/6W 8.2 kohms,1/6W 1 kohm,1/6W 680 ohms,1/8W 12 kohms,1/8W 1.2 kohms,1/8W 220 ohms,1/8W 12 kohms,1/6W 470 ohms,1/8W 100 ohm,1/8W 1 ohm,1/4W 3.3 kohms,1/6W 3.3 ohms,1/4W,Fusible 1 kohm,1/8W 1 kohm,1/6W 2.2 kohms,1/8W 3.3 kohms,1/8W 47 kohms,1/8W 4.7 kohms,1/8W 15 kohms,1/6W 15 kohms,1/8W 10 kohm,1/8W 4.7 kohms,1/8W 1 kohm,1/6W 56 ohms,1/6W 56 ohms,1/8W 100 kohm,1/8W 3.9 kohms,1/8W 5.6 kohms,1/8W 12 kohms,1/8W 68 kohms,1/8W 4.7 kohms,1/8W 6.8 kohms,1/8W 1.5 kohms,1/8W 100 ohm,1/8W 10 kohm,1/8W 10 kohm,1/8W 10 kohm,1/6W 150 ohms,1/4W 220 kohms,1/8W 220 kohms,1/6W 220 ohms,1/4W 82 ohms,1/4W 47 kohms,1/8W 4.7 kohms,1/6W 22 kohms,1/8W 47 kohms,1/8W 4.7 ohms,1/6W 1 kohm,1/8W 10 ohm,1/8W 10 kohm,1/6W 100 kohm,1/8W 33 kohms,1/8W 22 ohms,1/6W 4.7 kohms,1/8W 680 ohms,1/8W 68 kohms,1/8W 47 kohms,1/8W 33 ohms,1/8W 10 kohm,1/8W 2.7 kohms,1/8W CD-M10000W/CP-M10000 NO. R351 R352 R353 R355 R356 R357 R358 R359 R360 R361,362 R363,364 R365 R368 R372~374 R375 R376 R377 R378 R379 R380 R381 R382 R383 R384 R385 R387 R388 R391,392 R393 R395 R401,402 R404 R405 R407 R408 R409,410 R411,412 R413,414 R415,416 R417,418 R419,420 R605,606 R607,608 R609,610 R611,612 R613,614 R615,616 R617,618 R619,620 R621,622 R623,624 R625~627 R631,632 R633,634 R637,638 R700 R701 R702 R703 R704 R705 R706 R708 R713,714 R716 R717,718 R719 R720 R721 R724 R725 R736,737 R738~745 R746 R747 R748 R749 R751 R752 R753 R754 R755,756 PRICE RANK PART CODE VRD-MN2BD562J VRD-MN2BD102J VRD-MN2BD271J VRD-MN2BD332J VRD-MN2BD102J VRD-ST2CD474J VRD-ST2CD392J VRD-MN2BD182J VRD-MN2BD472J VRD-MN2BD332J VRD-ST2CD682J VRD-MN2BD103J VRD-ST2CD223J VRD-MN2BD102J VRD-ST2CD471J VRD-MN2BD102J VRD-MN2BD473J VRD-MN2BD102J VRD-MN2BD222J VRD-MN2BD152J VRD-MN2BD103J VRD-ST2EE151J VRD-MN2BD562J VRD-ST2CD562J VRD-MN2BD562J VRD-ST2CD562J VRD-MN2BD392J VRD-ST2EE271J VRD-MN2BD102J VRD-MN2BD473J VRD-ST2CD183J VRD-ST2CD472J VRD-ST2CD822J VRD-ST2CD472J VRD-ST2CD822J VRD-ST2CD561J VRD-ST2CD102J VRD-ST2CD683J VRS-VV3DA821J VRD-ST2CD104J VRD-ST2CD683J VRD-MN2BD392J VRD-MN2BD103J VRD-ST2CD331J VRD-MN2BD562J VRD-MN2BD391J VRD-MN2BD222J VRD-MN2BD472J VRD-MN2BD223J VRD-MN2BD222J VRD-ST2CD472J VRD-ST2CD102J VRD-MN2BD822J VRD-MN2BD393J VRD-MN2BD474J VRD-MN2BD103J VRD-MN2BD104J VRD-ST2CD102J VRD-ST2CD103J VRD-MN2BD104J VRD-ST2CD102J VRD-ST2CD103J VRD-ST2CD103J VRD-MN2BD103J VRD-MN2BD104J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD103J VRD-ST2CD472J VRD-ST2CD330J VRD-MN2BD103J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD182J VRD-ST2CD222J VRD-ST2CD471J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AC AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION NO. 5.6 kohms,1/8W 1 kohm,1/8W 270 ohms,1/8W 3.3 kohms,1/8W 1 kohm,1/8W 470 kohms,1/6W 3.9 kohms,1/6W 1.8 kohms,1/8W 4.7 kohms,1/8W 3.3 kohms,1/8W 6.8 kohms,1/6W 10 kohm,1/8W 22 kohms,1/6W 1 kohm,1/8W 470 ohms,1/6W 1 kohm,1/8W 47 kohms,1/8W 1 kohm,1/8W 2.2 kohms,1/8W 1.5 kohms,1/8W 10 kohm,1/8W 150 ohms,1/4W 5.6 kohms,1/8W 5.6 kohms,1/6W 5.6 kohms,1/8W 5.6 kohms,1/6W 3.9 kohms,1/8W 270 ohms,1/4W 1 kohm,1/8W 47 kohms,1/8W 18 kohms,1/6W 4.7 kohms,1/6W 8.2 kohms,1/6W 4.7 kohms,1/6W 8.2 kohms,1/6W 560 ohms,1/6W 1 kohm,1/6W 68 kohms,1/6W 820 ohms,2W 100 kohm,1/6W 68 kohms,1/6W 3.9 kohms,1/8W 10 kohm,1/8W 330 ohms,1/6W 5.6 kohms,1/8W 390 ohms,1/8W 2.2 kohms,1/8W 4.7 kohms,1/8W 22 kohms,1/8W 2.2 kohms,1/8W 4.7 kohms,1/6W 1 kohm,1/6W 8.2 kohms,1/8W 39 kohms,1/8W 470 kohms,1/8W 10 kohm,1/8W 100 kohm,1/8W 1 kohm,1/6W 10 kohm,1/6W 100 kohm,1/8W 1 kohm,1/6W 10 kohm,1/6W 10 kohm,1/6W 10 kohm,1/8W 100 kohm,1/8W 10 kohm,1/8W 1 kohm,1/6W 10 kohm,1/8W 4.7 kohms,1/6W 33 ohms,1/6W 10 kohm,1/8W 10 kohm,1/8W 1 kohm,1/6W 10 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 10 kohm,1/8W 1 kohm,1/8W 10 kohm,1/8W 1.8 kohms,1/8W 2.2 kohms,1/6W 470 ohms,1/6W R757 R758~761 R762 R763~765 R766~768 R769 R770 R771~773 R775~777 R778 R779~782 R783~791 R792,793 R794 R795 R796 R797 R799 R802 R803 R805 R806 R807 R810,811 R819 R852,853 R854 R855 R856 R861 R863 R865 R866 R867 R868,869 R870 R871 R873 R874,875 R878,879 R880 R900 R901,902 R903,904 R905 R906~909 R910 1 R911,912 R913 R916 R917,918 R919,920 R921,922 R923 R924 R925~928 R929,930 R931,932 R933,934 R935,936 R937 R938,939 R942 R943 R944 R945 R946 R947 R948 R949 R950 R951,952 R953,954 R955 R956 R957~959 R960,961 R962 R963 R964,965 R966~969 R974 –4– PRICE RANK PARTS CODE VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD103J VRD-MN2BD473J VRD-MN2BD104J VRD-MN2BD101J VRD-ST2CD102J VRD-ST2CD123J VRD-ST2EE100J VRD-ST2CD224J VRD-ST2CD473J VRD-ST2EE470J VRD-ST2CD473J VRD-ST2CD223J VRD-ST2CD103J VRD-RT2HD3R3J VRD-ST2EE331J VRD-MN2BD683J VRD-MN2BD333J VRD-ST2EE101J VRD-ST2EE331J VRD-ST2CD104J VRD-MN2BD123J VRD-MN2BD222J VRD-ST2EE103J VRD-MN2BD102J VRD-MN2BD104J VRD-MN2BD223J VRD-MN2BD103J VRD-RT2HD100J VRD-ST2CD102J VRD-ST2CD563J VRD-ST2CD102J VRD-ST2CD561J VRD-ST2CD563J VRG-ST2EC101J VRN-VV3LAR22J VRN-VV3LAR22J VRN-VV3LAR10J VRD-ST2CD152J VRD-ST2CD182J VRD-ST2CD563J VRD-RT2HD100J VRD-RT2HD100J VRD-ST2CD563J VRD-RT2HD100J VRD-ST2CD392J VRD-RT2HD100J VRD-ST2EE223J VRD-RT2HD100J VRD-RT2HD100J VRD-RT2HD100J VRD-ST2CD333J VRD-ST2CD123J VRD-ST2CD103J VRD-RT2HD223J VRD-ST2EE223J VRD-ST2CD474J VRD-ST2CD102J VRD-ST2CD392J VRD-RT2HD100J VRD-RT2HD100J VRD-ST2CD563J VRD-RT2HD100J VRS-VV3DA122J VRD-ST2CD102J VRD-ST2CD103J VRS-VV3DA561J VRD-ST2EE102J VRD-RT2HD223J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AC AC AD AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AC AA AA DESCRIPTION 10 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 10 kohm,1/8W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/6W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 10 kohm,1/8W 1 kohm,1/6W 10 kohm,1/8W 47 kohms,1/8W 100 kohm,1/8W 100 ohm,1/8W 1 kohm,1/6W 12 kohms,1/6W 10 ohm,1/4W 220 kohms,1/6W 47 kohms,1/6W 47 ohms,1/4W 47 kohms,1/6W 22 kohms,1/6W 10 kohm,1/6W 3.3 ohms,1/2W 330 ohms,1/4W 68 kohms,1/8W 33 kohms,1/8W 100 ohm,1/4W 330 ohms,1/4W 100 kohm,1/6W 12 kohms,1/8W 2.2 kohms,1/8W 10 kohm,1/4W 1 kohm,1/8W 100 kohm,1/8W 22 kohms,1/8W 10 kohm,1/8W 10 ohm,1/2W 1 kohm,1/6W 56 kohms,1/6W 1 kohm,1/6W 560 ohms,1/6W 56 kohms,1/6W 100 ohm,1/4W,Fusible 0.22 ohms,3W 0.22 ohms,3W 0.1 ohm,3W 1.5 kohms,1/6W 1.8 kohms,1/6W 56 kohms,1/6W 10 ohm,1/2W 10 ohm,1/2W 56 kohms,1/6W 10 ohm,1/2W 3.9 kohms,1/6W 10 ohm,1/2W 22 kohms,1/4W 10 ohm,1/2W 10 ohm,1/2W 10 ohm,1/2W 33 kohms,1/6W 12 kohms,1/6W 10 kohm,1/6W 22 kohms,1/2W 22 kohms,1/4W 470 kohms,1/6W 1 kohm,1/6W 3.9 kohms,1/6W 10 ohm,1/2W 10 ohm,1/2W 56 kohms,1/6W 10 ohm,1/2W 1.2 ohms,2W 1 kohm,1/6W 10 kohm,1/6W 560 ohms,2W 1 kohm,1/4W 22 kohms,1/2W CD-M10000W/CP-M10000 NO. R975,976 R977 R978 R979 R980 R981,982 R983 R984 R985 1 R986 R987~990 1 R991 R998,999 RD01 RD02 RD03 RD04 RD05 RD06 RD07 RD08 RD09 RD10 RD11 RD12 RD13 RD14 RD15 RD25 RD26 RD27 RD28 RD29 RD30 RD31 RD32 RD33 RD34 RD35 RD36 RFM937 RFM938 RFM939 RK1 RK2,3 RK4 RK5 RK7 RK8 RK9~11 RK12 RK13 RK14,15 RK36,37 RK38 RK39,40 RK41,42 RK43 RK44,45 RK46 RK47 RK48~50 RL701~705 RL706~708 RS701 RS702 RS703 RS704 RS705 RS706 RS707 RS708 RS709 RS710 RS711 RS712 RS713 RS714 RS715 RS716 RS717 RS718 PRICE RANK PART CODE VRD-ST2CD102J VRD-RT2HD223J VRD-ST2EE223J VRD-RT2HD223J VRD-ST2EE223J VRD-ST2CD102J VRD-ST2CD563J VRD-ST2CD333J VRD-ST2CD102J VRG-ST2EC101J VRN-CM05N0R1J VRG-ST2EC101J VRD-ST2CD563J VRD-MN2BD681J VRD-MN2BD821J VRD-MN2BD102J VRD-MN2BD152J VRD-MN2BD222J VRD-MN2BD272J VRD-MN2BD392J VRD-MN2BD562J VRD-MN2BD103J VRD-MN2BD183J VRD-MN2BD333J VRD-MN2BD104J VRD-MN2BD681J VRD-MN2BD821J VRD-ST2CD184J VRD-MN2BD681J VRD-MN2BD821J VRD-MN2BD102J VRD-MN2BD152J VRD-MN2BD222J VRD-MN2BD272J VRD-MN2BD392J VRD-MN2BD562J VRD-MN2BD103J VRD-MN2BD153J VRD-MN2BD333J VRD-MN2BD104J VRD-ST2CD153J VRD-ST2CD683J VRD-ST2CD102J VRD-ST2CD103J VRD-ST2CD563J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD102J VRD-ST2CD562J VRD-ST2CD102J VRD-ST2CD101J VRD-ST2CD122J VRD-RT2HD101J VRD-ST2CD391J VRD-ST2CD101J VRD-ST2CD102J VRD-ST2CD103J VRD-ST2CD183J VRD-ST2CD682J VRD-ST2CD183J VRD-ST2CD822J VRD-ST2CD103J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD333J VRD-MN2BD103J VRD-MN2BD683J VRD-MN2BD224J VRD-MN2BD123J VRD-MN2BD224J VRD-MN2BD394J VRD-ST2EE271J VRD-MN2BD154J VRD-ST2EE271J VRD-MN2BD104J VRD-MN2BD824J VRD-ST2CD104J VRD-MN2BD225J VRD-MN2BD104J VRD-MN2BD105J VRD-MN2BD474J VRD-MN2BD563J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AB AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 1 kohm,1/6W 22 kohms,1/2W 22 kohms,1/4W 22 kohms,1/2W 22 kohms,1/4W 1 kohm,1/6W 56 kohms,1/6W 33 kohms,1/6W 1 kohm,1/6W 100 ohm,1/4W,Fusible 0.1 ohms,5W 100 ohm,1/4W,Fusible 56 kohms,1/6W 680 ohms,1/8W 820 ohms,1/8W 1 kohm,1/8W 1.5 kohms,1/8W 2.2 kohms,1/8W 2.7 kohms,1/8W 3.9 kohms,1/8W 5.6 kohms,1/8W 10 kohm,1/8W 18 kohms,1/8W 33 kohms,1/8W 100 kohm,1/8W 680 ohms,1/8W 820 ohms,1/8W 180 kohms,1/6W 680 ohms,1/8W 820 ohms,1/8W 1 kohm,1/8W 1.5 kohms,1/8W 2.2 kohms,1/8W 2.7 kohms,1/8W 3.9 kohms,1/8W 5.6 kohms,1/8W 10 kohm,1/8W 15 kohms,1/8W 33 kohms,1/8W 100 kohm,1/8W 15 kohms,1/6W 68 kohms,1/6W 1 kohm,1/6W 10 kohm,1/6W 56 kohms,1/6W 10 kohm,1/6W 1 kohm,1/6W 1 kohm,1/6W 5.6 kohms,1/6W 1 kohm,1/6W 100 ohm,1/6W 1.2 kohms,1/6W 100 ohm,1/2W 390 ohms,1/6W 100 ohm,1/6W 1 kohm,1/6W 10 kohm,1/6W 18 kohms,1/6W 6.8 kohms,1/6W 18 kohms,1/6W 8.2 kohms,1/6W 10 kohm,1/6W 1 kohm,1/6W 1 kohm,1/8W 33 kohms,1/8W 10 kohm,1/8W 68 kohms,1/8W 220 kohms,1/8W 12 kohms,1/8W 220 kohms,1/8W 390 kohms,1/8W 270 ohms,1/4W 150 kohms,1/8W 270 ohms,1/4W 100 kohm,1/8W 820 kohms,1/8W 100 kohm,1/6W 2.2 Mohms,1/8W 100 kohm,1/8W 1 Mohm,1/8W 470 kohms,1/8W 56 kohms,1/8W NO. RS719 RS720 PRICE RANK PARTS CODE VRD-ST2CD153J VRD-MN2BD184J J J DESCRIPTION AA 15 kohms,1/6W AA 180 kohms,1/8W OTHER CIRCUITRY PARTS BI4/CNS4 BI11/CNS11 BI12A/B BI13/CNS13 BI102/CNS102 BI602/CNS602 BI703/CNS703 BI704/CNS704 BI705/CNS705 BI905/CNS905 BI906/CNS906 BI908A/B CNP1 CNP2 CNP3 CNP3A CNP4 CNP7 CNP8 CNP101 CNP301 CNP601 CNP701 CNP702 CNP704 CNP705 CNP801 CNP802 CNP901 CNP902 CNP903 CNP904 CNP905 CNP906 CNP907 CNPK1 CNS1A/B CNS2A/B CNS3A/B CNS901 CNS904 CNS907 1 F801 1 F802,803 1 F804,805 1 F806,807 1 F808,809 FC701 FC702 FL701 FW901 FW901A JK1 JK601 JK670 JOG701 LG1 LG801,802 LG901 M1 M2 M3 QCNWN1572AWZZ QCNWN2190AWZZ QCNWN2201AWZZ QCNWN2186AWZZ QCNWN2189AWZZ QCNWN2188AWZZ QCNWN1843AWZZ QCNWN2038AWZZ QCNWN2033AWZZ QCNWN2187AWZZ QCNWN1285AWZZ QCNWN2192AWZZ QCNCM704GAWZZ QCNCM704HAWZZ 92LCONE6P53253 92LCONE6P53254 QCNCM705FAFZZ 92LCONE6P53254 92LCONE9P53254 QCNCM705CAFZZ 92LCONE2P5268 QCNCWZX21AWZZ QCNCWZF21AWZZ QCNCWZY10AWZZ 92LCONE3P53253 92LCONE5P52287 QCNCM035EAWZZ QCNCM049BAWZZ QCNCM010NAWZZ 92LCONE2P5267 92LCONE4P53253 92LCONE2P53253 QCNCM050GAWZZ 92LCONE7P5267 92LCONE2P53253 QCNCM705KAWZZ QCNWN1537AWZZ QCNWN1538AWZZ QCNWN1539AWZZ QCNCW010NAWZZ QCNWN1582AWZZ QCNWN1452AWZZ QFS-D153EAWNI QFS-D802EAWNI QFS-D632CAWNI QFS-D502CAWNI QFS-D202CAWNI QCNWN2191AWZZ QCNWN1845AWZZ VVKBJ11LM02T1 QCNWN1927AWZZ QCNCW019EAWZZ QJAKJ0007AWZZ QSOCJ0224AWZZ QJAKM0004AWZZ QSW-Z0014AWZZ QLUGP0001AWZZ QLUGP0004AWZZ QLUGP0001AWZZ 92LMTR2790CASY 92LMTR1854BASY 92LTWMEN7E6Y J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M903,904 PINK1 RL901,902 RX701 SO301 SO901 SW1 SW2 SW3 SW4 SW601 RMOTV0027AWZZ QLUGP0002AWZZ RRLYD0004AWZZ VHLN63H380A-1 QTANC0206AWZZ QTANA0810AWZZ SWMPU10780MLB SWMPU11470MLB SWMPU11470MLB QSW-F9001AW01 QSW-S0024AWZZ J J J J J J J J J J J AM AB AP AK AD AF AH AE AE AD AE SW701 92LSWICHT1663T J AC –5– AF AH AE AC AK AC AC AC AC AB AC AD AA AB AD AF AC AB AC AB AC AC AB AB AB AB AC AG AG AE AC AC AC AC AC AC AE BC AD AF AC AK AF AC AC BB AP AR Connector Ass’y,6/6Pin Connector Ass’y,6/6Pin Connector Ass’y,3/3Pin Connector Ass’y,2/2Pin Connector Ass’y,7/7Pin Connector Ass’y,10/10Pin Connector Ass’y,9/9Pin Connector Ass’y,3/3Pin Connector Ass’y,4/4Pin Connector Ass’y,7/7Pin Connector Ass’y,7/7Pin Connector Ass’y,6/6Pin Plug,7Pin Plug,8Pin Plug,6Pin Plug,6Pin Plug,6Pin Plug,6Pin Plug,9Pin Plug,3Pin Plug,2Pin Plug,21Pin Socket,21Pin Socket,10Pin Plug,3Pin Socket,5Pin Plug,5Pin Plug,2Pin Plug,13Pin Plug,2Pin Socket,4Pin Plug,2Pin Plug,7Pin Socket,7Pin Plug,2Pin Plug,10Pin Connector Ass’y,7/7Pin Connector Ass’y,8/8Pin Connector Ass’y,6/6Pin Connector,13Pin Connector,2Pin Socket,2Pin Fuse,T15A L 250V Fuse,T8A L 250V Fuse,T6.3A L 250V Fuse,T5A L 250V Fuse,T2A L 250V Flat Cable,21Pin Flat Cable,10Pin FL Display Flat Wire,5Pin Holder,Flat Wire Jack,Mic Jack,Video/AUX Jack,Headphones Switch,Push Type [Jog,Volume] Lug Lug Terminal Lug Motor with Chassis [Spindle] Motor with Gear [Sled] Motor with Worm Pulley [CD Loading] Motor,Air Cooling Fan Lug Relay Remote Sensor,N63H380A Terminal,FM Antenna Terminal,Speaker Switch,Push Type [Open/Close] Switch,Push Type [Clamp] Switch,Push Type [Disc Number] Switch,Leaf Type [Pickup In] Switch,Slide Type [Span Selector] Switch,Key Type [ON/Stand-by] CD-M10000W/CP-M10000 NO. PRICE RANK PART CODE SW702 SW703 SW709 SW710 SW711 SW712 SW713 SW714 SW715 SW716 SW717 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T J J J J J J J J J J J AC AC AC AC AC AC AC AC AC AC AC SW722 SW723 SW724 SW725 SW726 SW727 SW728 SW729 SW730 SW731 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T J J J J J J J J J J AC AC AC AC AC AC AC AC AC AC SW732 SW733 SW734 1 SW801 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T QSOCE0010AWZZ J J J J AC AC AC DESCRIPTION NO. Switch,Key Type [Clock] Switch,Key Type [Timer] Switch,Key Type [Disc 1] Switch,Key Type [Disc 2] Switch,Key Type [Disc 3] Switch,Key Type [Disc Skip] Switch,Key Type [Open/Close] Switch,Key Type [Dimmer] Switch,Key Type [Monster Bass] Switch,Key Type [Equalizer] Switch,Key Type [Reverse Mode] Switch,Key Type [CD] Switch,Key Type [Tape] Switch,Key Type [Tuning Down] Switch,Key Type [Memory Set] Switch,Key Type [Fast Rewind] Switch,Key Type [Fast Forward] Switch,Key Type [Play] Switch,Key Type [Stop] Switch,Key Type [Reverse Play] Switch,Key Type [RECORD/Pause] Switch,Key Type [Tuning Up] Switch,Key Type [Video] Switch,Key Type [Tuner] Switch,Slide Type [Voltage Selector] CD MECHANISM PARTS 301 302 303 304 305 1 306 306- 1 NGERH0011AWZZ NGERH0012AWZZ MLEVP0080AWZZ NSFTM0020AWFW 92LM-CUSN1524A 92LHPC1LXASY ———— J J J J J J AC AC AC AD AC BD — 306- 2 306- 3 701 702 703 704 M1 M2 SW4 NGERR0043AFZZ MSPRC0961AFZZ XBSSD26P06000 XHBSD20P05000 XBBSD20P03000 LX-WZ1070AFZZ 92LMTR2790CASY 92LMTR1854BASY QSW-F9001AW01 J J J J J J J J J AC AA AA AA AA AA BB AP AD 201 201- 1 92LCAB3808AASY J ———— — 201- 2 201- 3 201- 4 201- 5 201- 6 201- 7 201- 8 201- 9 201-10 201-11 201-12 201-13 201-14 201-15 201-16 201-17 201-18 201-19 201-20 201-21 201-22 201-23 201-24 201-25 201-26 201-27 201-28 GDORF0097AWSA GDORF0098AWSA GCOVA1352AWSA GCOVA1384AWSA HDECQ0670AWSA HDECQ0671AWSA HDECQ0829AWSA JKNBZ0820AWSA JKNBZ0766AWSA JKNBZ0768AWSA HDECQ0674AWSA JKNBZ0800AWSA JKNBZ0801AWSA MLIFP0008AWZZ JKNBZ0834AWSA 92LBADGE1671A GCOVA1339AWSA GCOVA1380AWSA GCOVA1381AWSA PSPAK0006AWZZ MLOKC0006AWZZ MLOKC0007AWZZ LHLDZ1328AWZZ GCOVA1382AWSA GCOVA1344AWSA GCOVA1345AWSA GCOVA1346AWSA Gear,Middle Gear,Drive Rail,Guide Shaft,Guide Cushion Pickup Unit Ass’y Pickup Unit (Not Replacement Item) Gear,Rack Spring,Rack Screw,ø2.6×6mm Screw,ø2×5mm Screw,ø2×3mm Washer,ø1.5×3.8×0.25mm Motor with Chassis [Spindle] Motor with Gear [Sled] Switch,Leaf Type [Pickup In] CABINET PARTS J J J J J J J J J J J J J J J J J J J J J J J J J J J AE AE AH AK AE AE AE AG AE AE AF AG AD AG AC AB AB AB AB AB AB AC AB AB AB AB Front Panel Ass’y Front Panel (Not Replacement Item) Holder,Cassette [Tape 1] Holder,Cassette [Tape 2] Cover,Cassette [Tape 1] Cover,Cassette [Tape 2] Panel,Cassette [Tape 1] Panel,Cassette [Tape 2] Panel,Amp. Button,ON/Stand-by Button,Dimmer/Tuning Button,Function Volume Ring Button,Disc Control Button,Center Operation Damper Button,Equalizer/Monster Bass Badge,SHARP Cover,LED,Power Cover,LED,A Cover,LED,B Spacer,Cassette Lock Holder Lock Lever,Cassette [Tape 1] Lock Lever,Cassette [Tape 2] Holder,Cassette Lock Cover,LED,C Cover,Disc No.LED,A Cover,Disc No.LED,B Cover,Disc No.LED,C –6– PRICE RANK PARTS CODE 201-29 201-30 201-31 201-32 201-33 201-34 202 202- 1 GCOVA1394AWSA MSPRC0029AWFJ PSHEM0008AWZZ GCOVA1404AWSA MSPRD0167AWFJ MSPRD0168AWFJ 92LCAB3808BASY ———— J J J J J J J AD AB AD AE AB AB 202- 2 203 203- 1 PCUSG0022AWZZ J 92LCAB3808CASY J ———— AB 203- 2 204 206 207 PCUSG0022AWZZ GCAB-1192AWSA GCOVA1338AWSA GITAR0873AWSA J J J J AB AN AH 207 207 209 210 211 213 214 215 218 219 220 221 1 222 1 222 1 222 223 1 224 225 226 227 228 229 230 231 231- 1 231- 2 231- 3 231- 4 231- 5 232 233 235 236 237 238 239 241 242 243 244 245 246 247 248 250 251 252 253 254 256 257 258 258- 1 258- 2 258- 3 258- 4 258- 5 258- 6 258- 7 258- 8 258- 9 258-10 258-11 GITAR0932AWSA GITAR0933AWSA LANGK0318AWFW LANGK0311AWFW LANGK0313AWFW LCHSM0149AWFW LHLDZ1332AWZZ QCNWN2030AWZZ NFANP0001AWZZ PCUSG0022AWZZ PRDAR0228AWFW PRDAR0227AWFW QACCA0005AW00 QACCE0014AW00 QACCL0007AW00 QCNWN2200AWZZ QFSHD0001AWZZ 92LBE231616 92LCSPR1431C 92LEVA0330702 92LMAG0104302 92LMT0304302 92LNBAND1318A TWPT0312005 92LPT0312005 92LSP0304303 92LPT0304304 92LNM0305401 92LPT0305413 92LPT0303002 92LPT0304303 92LPT0304305 92LPT0304306 92LPT0304307 92LPT0304308 92LPT0304309 92LPT0309506 92LPT0309507 92LPT0309508 92LPT0309509 92LPT0309510 92LPT0309511 92LPT0311101 92LPT0311102 92LPT0320201 92LPT0330301 92LPT0330803 92LPT0331003 92LPT0331105 92LSP0304305 92LSP0304306 KMECB0019AWZZ 92PF513-853 92PF525-336 92PF567-677 92PFF19N-21 92PF514-133 92PF19S-31 92PFF19N-11 92PF522-061 92PFF19S-52 92PF513-861 92PF522-063 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J — — AD AD AD AB AB AD AA AD AE AB AA AL AB AB AB AG AB AB AE AG AC AB AB AD AD AD AD AE AD AB AC AE AU AK AT AM AB AB BH BL BE BA AL AL AL AL AZ AL AG AZ DESCRIPTION Cover,Remote Control Sensor Spring,Cassette Lock Sheet,Shield Cover,Monster Button Spring,Cassette [Tape 1] Spring,Cassette [Tape 2] Side Panel Ass’y,Left Side Panel,Left (Not Replacement Item) Cushion,Leg Side Panel Ass’y,Right Side Panel,Right (Not Replacement Item) Cushion,Leg Top Cabinet Cover,CD Tray Rear Panel [Except for Philippines/Russia] Rear Panel [For Philippines] Rear Panel [For Russia] Bracket,Main Heat Sink [Left] Bracket,Main Heat Sink [Right] Bracket,Fan Support A Chassis,Main Holder,FL Display Lug Wire Rotary Fan Cushion,Leg Heat Sink,Main Heat Sink,Sub AC Power Supply Cord AC Power Supply Cord AC Power Supply Cord Lug Wire Holder,Fuse Belt Spring,Ring Velvet Carpet,Chassis Magnet Plate,Metal Nylon Band,80mm Cam Gear Ass’y Gear,Cam Spring,Stopper Stopper Velvet Carpet Cam Gear Lower Roller Lever,Stop Lever,Lock Stabilizer Support,Cam Lock Gear Pin Cap,Pulley Stopper Gear,Turntable Drive Gear,Open/Close Drive Gear,Planet Gear,Drive Gear,Pulley Gear,Middle Lever,Clamp Lever,Disc Support,Stabilizer Chassis,Loading Chassis,CD Mechanism Shassis,Slide Turntable Spring,Lock Spring,Lock Gear Tape Mechanism Ass’y Head Plate Block [Tape 2] Motor with Pulley [Tape] Tape Mechanism PWB Ass’y Belt,Main [Tape 2] Pinch Roller Belt,FF/REW [Tape 2] Belt,Main [Tape 1] Clutch Ass’y Block [Tape 1] Belt,FF/REW [Tape 1] Head Plate Block [Tape 1] Clutch Ass’y Block [Tape 2] CD-M10000W/CP-M10000 NO. 259 261 261 262 263 266 268 272 273 274 275 276 277 603 604 605 606 607 608 609 610 611 614 615 616 618 620 621 622 623 624 625 626 PRICE RANK PART CODE TLABS0354AWZZ TSPC-1003AWZZ TSPC-1004AWZZ JKNBK0012AWSG LHLDZ1320AWZZ LHLDF1019AWSA GITAR0872AWSA JKNBK0084AWSA LHLDZ1327AWZZ PCOVQ3005AWZZ LANGK0312AWFW LANGK0316AWFW LANGK0298AWFW LX-JZ0010AFFD LX-LZ0012AWZZ XBBSD20P04000 XEBSD30P10000 XEBSD30P12000 XESSD30P10000 XHBSD30P06000 XJBSD30P10000 XJBSD30P16000 92LSC0308MBZI 92LSC0308RBZI LX-HZ0169AFFD XEBSD26P10000 XEBSD30P08000 LX-EZ0010AWFD LX-JZ0022AFFD XHBSD40P0600 XJSSD30P10000 XEBSD26P08000 XJBSF30P10000 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J DESCRIPTION AC Label,Class 3 Label,Specification [For Thailand] Label,Specification [For Mexico] AK Knob,Karaoke AC Holder,Disc No.LED AD Holder,Main PWB Support Back Plat Top AE Button,Volume AE Holder,Button Block Dust Cover,Mechanism Bracket,PWB Support Bracket,Fan Support B Bracket,Changer Support AA Screw,ø3×10mm Push Rivet AA Screw,ø2×4mm AA Screw,ø3×10mm AA Screw,ø3×12mm AA Screw,ø3×10mm AA Screw,ø3×6mm AA Screw,ø3×10mm AA Screw,ø3×16mm AB Screw,ø3×8mm AB Screw,ø3×8mm AA Screw,ø4×8mm AA Screw,ø2.6×10mm AA Screw,ø3×8mm AA Screw,Special AA Screw,ø3×8mm Screw,ø4×6mm AA Screw,ø3×10mm Screw,ø2.6×8mm AA Screw,ø3×10mm ACCESSORIES/PACKING PARTS 1 1 QANTL0008AWZZ QPLGA0003AWZZ QPLGA0005AWZZ SPAKA0353AWZZ SPAKC1363AWZZ J J J J J SPAKC1364AWZZ J SPAKP0026AWZZ J SPAKP0090AWZZ SPAKZ0573AWZZ SPAKZ0870AWZZ SSAKA0007AWZZ TCAUZ0035AWZZ TCAUZ0125AWZZ TGANE0011AW85 TINST0114AWZZ TINSZ0762AWZZ J J J J J J J J J TINSZ0763AWZZ TINSZ0764AWZZ J J TLABB0001AWZZ TLABE0639AWZZ TLABE0640AWZZ TLABJ0003AWZZ TLABR1221AWZZ TLABS0100AWZZ J J J J J J TLABS0102AWZZ TLABZ0838AWZZ TLABZ1035AWZZ J J J TLABZ1036AWZZ J TLABZ1037AWZZ 92LBAG760C 92LFANT1746A 92LGCARD1266E1 92LLABL1204C 92LLABL1507B 92LPANEL713A RRMCG0316AWSA GFTAB1042AWSA J J J J J J J J J AH AM Loop Antenna AF Adaptor,AC Plug Adaptor,AC Plug Packing Add. Packing Case [For Australia/New Zealand] Packing Case [Except for Australia/New Zealand] AB Polyethylene Bag,AC Power Supply Cord Miramat Bag,Unit AB Sheet,CD Tray Spacer AB Polyethylene Bag,Accessories AB Sheet,Caution Sheet,Caution Warranty Card [For Philippines] Operation Manual [For Thailand] Operation Manual [Except for Australia/New Zealand/Russia/Thailand] Operation Manual [For Russia] Operation Manual [For Australia/New Zealand] AB Label,Japan [For Set] Label,Bar Code Label,Bar Code AB Label,Japan [For Packing Case] Label,Bar Code AB Label,Gost Rostest [Packing Case] AB Label,Gost Rostest [Rear Panel] AB Label,FDA Label,Feature [Tape 1] [Except for Australia/New Zealand] Label,Feature [Tape1] [For Australia/New Zealand] Label,Feature [Tape 2] AA Polyethylene Bag,AC Plug AD FM Antenna AC Warranty Card AA Label,MADE IN MALAYSIA AA Label,Made in Malaysia AB Panel,Made in Malaysia Remote Control Battery Lid,Remote Control NO. PRICE RANK PARTS CODE DESCRIPTION P.W.B. ASSEMBLY (Not Replacement Item) PWB-A PWB-B1~3 92LPWB3808MANS J 92LPWB3808DPLS J PWB-C 1 PWB-D1~3 92LPWB3563CDUS J 92LPWB3808PWRS J PWB-E PWB-F PWB-G PWB-H 92LPC99C017 92PF567-649 QPWBF0027AWZZ 92LPWB3553MICS — — J J J J Main Display/Headphones/LED (Combined Ass’y) — CD Servo — Power/Amp./Transformer (Combined Ass’y) AE CD Loading Motor (PWB Only) — Tape Mechanism AD CD Motor (PWB Only) — Mic J AZ CD Pickup Lens Cleaner AB Net Frame Ass’y [Woofer] Net Cover [Woofer] Front Panel Ass’y [Woofer] Speaker Box Ass’y [Woofer] Decoration Bar,Left Decoration Bar,Right Catching Holder Speaker Cord Foot Cushion [Woofer] Label,Specification [Woofer] Label,Caution [Woofer] Label [Woofer] Screw,ø3×8×10mm Screw,ø6×16mm Screw,ø4×16mm Front Panel Ass’y [Main speaker] Tweeter Ring [Main speaker] Speaker Box Ass’y [Main speaker] Speaker Cord Ass’y (With Capacitor C1,2) Foot Cushion [Main speaker] Label,Specification [Main speaker] Label [Main speaker] Screw,ø3×12mm Screw,ø4×16mm Woofer [Woofer] Woofer [Main speaker] Tweeter OTHER SERVICE PART UDSKA0004AFZZ CP-M10000 SPEAKER BOX PARTS 901 902 903 904 905 906 907 908 909 910 911 912 920 921 922 930 931 932 CWAKP1066AWSA HDECQ0827AWSA CPNLS1050AW01 GBOXS0081AWSA HDECA0017AWSA HDECA0018AWSA LHLDZ8002AWSA QCNWN2203AWSA PCUSG0022AWSA TSPC-0997AWSA TLABZ1073AWZZ TLABZ1117AWZZ LX-JZ0035AWSA XJBSD60P16000 XJBSD40P16000 CPNLS1046AW01 HDECQ0622AWSA GBOXS0080AWSA J J J J J J J J J J J J J J J J J J 933 QCNWN2155AWSA J 934 935 936 940 941 SP1,2 SP3~6 SP7,8 PUSG0103AWSA TSPC-0993AWSA TLABZ1118AWZZ XJBSD30P10000 XJBSD40P16000 RSPA10003AW6W RSPA10052AWCS RSPA00045AW6T J J J J J J J J AG AA AB PACKING PARTS SPAKC1355AWZZ SPAKA0339AWZZ SPAKA0340AWZZ J J J SPAKA0341AWZZ J SSAKH0087AWZZ J SSAKH0079AWZZ J QCNWN2157AWZZ J QCNWN2193AWZZ J –7– Packing Case Packing Add.,Top [Main speaker] Packing Add.,Bottom [Main speaker] Packing Add.,Top/Bottom [Woofer] Polyethylene Bag [Woofer] Polyethylene Bag [Main speaker] Speaker Cord Ass’y [Main speaker] Speaker Cord Ass’y [Woofer] CD-M10000W/CP-M10000 CD-M10000W 701 306 A 304 306-2 701 306-1 B 704 306-3 302 C 301 702 303 D 703x2 E M1 F 305 M2 305x2 G SW4 PWB-G H 1 2 3 4 Figure 8 CD MECHANISM EXPLODED VIEW –8– 5 6 CD-M10000W/CP-M10000 CD-M10000W 610x2 266 202-1 202 603x2 610 620 610x3 A 610x12 207 626x2 603 221 202-2 Q851 226 Q850 Silicon Grease PWB-A C FF/REW ROLLER ASS'Y Tape Motor FF/REW ROLLER ASS'Y FLYWHEEL FLYWHEEL MAIN BELT ASS'Y 606x10 ASS'Y TAPE1 TAPE2 FL701 610x2 611x2 218 BELT CONNECTION 609x2 220 211 605x2 214 261 610x3 Q852 M903 223 610x4 B 268 610x2 IC902 611x2 258-1, 258-2, 258-3, 258-4, 258-5, 258-6, 258-7, 258-8, 258-9, 258-10, 258-11 610 IC901 258 Silicon Grease 608x5 210 274 223 609x2 222 610x2 608 603x2 209 201 PWB-B1 215 201-20 201-25 201-14 263 PWB-B2 276 M904 605x2 226 PWB-F D 609x2 PWB-D2 621 201-19 603 201-9 608 201-10 625 603 201-26 201-27 201-32 201-24 201-1 T801 PWB-B3 201-28 201-21 201-30 201-22 E 618 201-18 201-11 201-29 201-17 616x5 218 273 621 201-13 201-16 262 201-31 201-15 621 609 201-23 201-30 201-21 272 PWB-H 608 201-12 201-24 224x6 277 PWB-D1 625 F 224x4 201-15 609 PWB-D3 213 275 224x8 219x2 201-8 622 201-2 G 624x3 623x2 201-33 T802 201-4 609 275 201-5 H 203-2 203-1 201-6 201-3 201-7 604x5 230 203 610x4 201-34 Note: Only the unit and consumable parts are supplied as parts supply for the Tape mechanism. 1 2 3 4 Figure 9 CABINET EXPLODED VIEW (1/2) –9– 5 6 CD-M10000W/CP-M10000 CD-M10000W 607x2 250 204 A 229 228 B 236 254 614 237 615x2 C CD MECHANISM 231-1 231-2 231-3 231-4 231-5 252 D PWB-C 241 231 243x4 PWB-G 244 M3 239 248 245 242 E 607x2 259 246 SW3 SW1 SW2 225 232 232 614 247 253 F 256 232 615 235 227 232x4 251 G 233 206 257 238 H 1 2 3 4 Figure 10 CABINET EXPLODED VIEW (2/2) – 10 – 5 6 CD-M10000W/CP-M10000 CP-M10000 (WOOFER) 921x2 903 A 921x2 905 B 907x4 920x3 C 906 909x2 911 904 902 D 910 901 912 908 E SP1, 2 F 909x2 SP1,2 WOOFER 922x8 G SPEAKER TERMINAL RD BK SP1,2 WOOFER SPEAKER TERMINAL H 1 2 3 4 Figure 11 SPEAKER EXPLODED VIEW (1/2) – 11 – 5 6 CD-M10000W/CP-M10000 CP-M10000 (MAIN SPEAKER) SP7,8 940x4 930 A 933 B SP3,4 941x4 931 C 936 932 SP5,6 D 935 941x4 E SP7,8 TWEETER F RD BK C1,2 SP5,6 Capacitor(N.P.) 2.2 µF,250 V WOOFER Electrolytic SP3,4 WOOFER 934x4 G TWEETER SP7(L-CH) SP8(R-TH) BK BL BL C1,2 Capacitor(N.P.) 2.2 µF,250 V Electrolytic BK WOOFER SP3(L-CH) SP4(R-TH) H 1 2 SPEAKER TERMINAL WOOFER SP5(L-CH) SP6(R-TH) SPEAKER TERMINAL 3 4 Figure 12 SPEAKER EXPLODED VIEW (2/2) – 12 – 5 6 CD-M10000W/CP-M10000 COPYRIGHT © 2001 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. SHARP CORPORATION AV Systems Group Audio Systems Division Higashihiroshima, Hiroshima 739-0192, Japan Printed in Japan A0112-1281DS•HA•M SA • SZ • EX