Transcript
SERVICE WASH-UP SINKS WSS SERIES
PROJECT#:_________________________________ ITEM#_____________________________________ MODEL#___________________________________ FEATURES: NSF approved, listed and labeled Sanitary design Engineered for use in cleaning, food prep and medical environments 14 gauge 304 type stainless steel fabrication available Units available with integral drainboards
SERVICE WASH-UP SINKS
Complete line of faucets and valves available
Custom configurations available
SPECIFICATIONS: A multipurpose sink fabricated in 16 gauge 304 type stainless steel. Wall mounted with cantilevered and flush mount wall brackets to provide maximum support. The sanitary design includes 1 3/4” rolled rim, 3/4” interior cove corners for easy cleaning and maintenance.
MECHANICAL SPECIFICATIONS: Standard 3 1/2” crumb cup drain with basket strainer. 1 1/2” NPS connection 10” high integral backsplash with 2” return to the wall at 45 degree angle Faucet holes drilled through the backsplash, 8” on center Cantilevered and flush mount wall brackets for installation
PLAN VIEW
Heavy-duty 16 gauge 304 series stainless steel material Fully welded, seamless, polished fabrication
SIDE VIEW
FRONT VIEW
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
01/09
Model No.
Bowl ID
O.A.
WSS-2015 WSS-2216 WSS-2816
20"x15"x14" 22"x16"x14" 28"x16"x14"
23 1/2" x 18 3/4" 25 1/2"x 19 3/4" 31 1/2"x 19 3/4"
SURGEON SCRUB SINK
PROJECT#:_______________________________ ITEM#___________________________________ MODEL#_________________________________
PLAN VIEW
END VIEW
FRONT VIEW Bowl Size
Model #
O.A. Dims
Weight
A
B
C
D
E
F
SCS-1814
18"
14"
12"
21 1/2"
17 3/4"
18"
59 lbs
SCS-2216
22"
16"
10"
25 1/2"
19 3/4"
16"
63 lbs
SCS-2820
28"
20"
10"
31 1/2"
23 3/4"
16"
67 lbs
SCS-2-2020
44"
20"
10"
47 1/2"
23 3/4"
16"
124 lbs
Performance Specifications A multipurpose sink fabricated in 14 gauge 304 type stainless steel. Wall mounted with cantilevered and flush mount wall brackets to provide maximum support. The sanitary design includes 1 3/4” rolled rim, 3/4” interior cove corners for easy cleaning and maintenance. Mechanical Specifications • Heavy-duty 14 gauge 304 stainless steel • Standard 3 1/2” die raised drain opening • Fully welded, seamless, polished fabrication to uniform brush finish for sanitary environments • Integral 6” stainless steel backsplash with 2” return to wall at 90 degree angle • Faucet hole drillings through the backsplash, 8” on center for 2 single spouts or mixing facets • Cantilevered and flush mount brackets for installation. 14 gauge 304 stainless steel Features • NSF listed and labeled • Sanitary design • Engineered for use in medical environments • Units available with integral drain boards • Complete line of faucets, spouts and valves available • Custom configurations available SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
04/10
