Transcript
READ ME FIRST! Setup Instructions The AIRAVE 2.5+ you requested is enclosed. The AIRAVE provides a boosted signal for your wireless voice and 3G data services. It’s like having your very own cell tower.
Before You Install Your AIRAVE Check that all these components are in the box:
Connect the External GPS Antenna
Install Your AIRAVE 1. Disconnect all power on your network, including your cable or DSL modem and router.
1. Follow the diagram below to connect the antenna to the AIRAVE. 2. Place the GPS antenna on a flat surface and next to a closed window, if possible.
1
2. Plug one end of the yellow Ethernet cable into your broadband modem.
GPS Antenna Module
LAN 2
ile
2
LAN 1
Mob
ork
Netw
GPS d
GPS
dban
Broa
Reset
WAN
AIRAVE 2.5+
12VDC
3
To Broadband Modem
LAN 2
LAN 1
AIRAVE
WAN
Mobile
Power Cord
Yellow Ethernet Cable
3. Connect the other end of the cable into the yellow WAN port at the back of the AIRAVE. 4. Reconnect power to your cable or DSL modem and wait about two minutes for the modem to power up and initialize.
GPS
Place on Window Sill
Note: It may take up to 30 minutes for the GPS LED light to become solid green.
4
Note: In large homes, the external GPS antenna can be used to allow the AIRAVE to be placed in a more central location, allowing for more even coverage throughout the house.
LAN 1
5. Plug the power supply connector into the back of the AIRAVE. 6. Plug the other end of the power cord into an available electrical outlet.
WAN
5
12VDC
to Power Supply
6
External GPS Antenna Cable Note: You will also need a working electrical outlet and a broadband connection (cable, DSL, etc.) to use this device.
12VDC
AIRAVE
AIRAVE Technical Support: 1-866-556-7310
co ot ntin he ue rs d id on e
Printed Materials
Network
Broadband
READ ME FIRST! Setup Instructions (Continued) PC or LAN Router Option
Check Your Connection
PC or LAN (local area network) Router: Connect your PC, your LAN router, or both to the AIRAVE’s LAN ports.
Your AIRAVE’s LED lights will flash as your device initializes and acquires a GPS lock.
If your AIRAVE is still not working, you have several resources that will have you up and running in no time:
When the Mobile, Network, GPS, and Broadband LED lights have stopped blinking, your AIRAVE is ready to use.
• In the Box The Technical and Troubleshooting Guide, with expanded details.
WAIT
GPS
This process can take up to two hours. Do not interrupt the process during this time.
Reset
LAN 2
LAN 1
WAN
12VDC
Resources
Once the four LED lights have stopped blinking and are a steady green, test your AIRAVE connection: Dial *99 on any Sprint phone. You should hear a message that says “You are now within AIRAVE coverage.” Note: You will hear three short beeps when placing or answering calls on your wireless phone if you are within range of the AIRAVE.
Important: To ensure the best voice and data quality, always connect the LAN router to your AIRAVE. Do not connect the router directly to your broadband modem or other broadband connection device.
• Online (sprint.com/airave) • FAQs, technical documentation, and more. • The latest User Guide, with detailed instructions for advanced features. • Phone AIRAVE Technical Support: 1-866-556-7310 • Ready Now – Visit sprint.com/readynow for additional help to get started on your new device. You’ll find more information on basic setup, activation, maximizing your device’s performance, etc. Plus, you can even schedule a personalized one-on-one Ready Now appointment at a Sprint Store near you.
The AIRAVE will display solid green lights when it is activated and functioning properly.
©2013 Sprint. SPRINT and the logo are trademarks of Sprint. Other marks are property of their respective owners.
AIRAVE Technical Support: 1-866-556-7310
912902
