Transcript
Package Contents Receiver (DMX-NV1) & Cable Cover
AC Adapter with AC Power Cord
Stand
Mounting Bracket
HDMI Cable
DMX-NV1 Warranty Card
Attachment Guide
312 611 111 (1 )
Quick Setup Guide
US A. in
Pr in te d
©
So ny
Co rp or at io n2 00 7.
NE TW O RK
VID EO
D M X-N V1
RE CE IV ER
Q uic k
Se tu p
Gu id e
USB Cable
Screws, Type 1
Mounting Knobs
Screws, Type 2
z Remote control not supplied. To operate this receiver, use your TV’s remote control equipped with the DMeX button.
NETWORK VIDEO RECEIVER Quick Setup Guide
z Ethernet cable required (not supplied).
© Sony Corporation 2007. Printed in USA.
z Using your PC, view the Operating Instruction Manual on the Internet at http://internet.sony.tv/manual
3-216-111-11(2)
Setting up the BRAVIATM Internet Video Link
Please read all instructions before beginning the installation. Refer to the separate Attachment Guide for instructions on attaching to your TV.
The BRAVIATM Internet Video Link receiver is compatible with certain Sony televisions with the XMBTM(XrossMediaBar®) and DMeX interface. High-speed Internet access is also required. Power off your TV before beginning the setup. The receiver can be installed either as a stand-alone or mounted to the back of your TV set.
1
Remove Cable Cover Remove the cable cover to expose the ports located on the bottom of the receiver.
2
Connect Cables
3
Connect the cables in the order shown below.
DC IN 9V
LAN OUT
%
# "
$
Connect to TV
B Connect the large end of the USB cable to the DMeX/SERVICE port on the TV. D Connect the straight end of the HDMI cable to any HDMI port on the TV.
B
INPUT LAN
DC IN 9V
LAN
DC IN 9V
DC IN SERVICE
NETWORK
Front of Receiver
A DC IN 9V: Connect the AC adapter to this port. Do not plug into the wall outlet at this time.
OUT
OUT
OUT
9V
LAN
%
$
" #
Connect an Ethernet cable to your Internet source by choosing one of the following recommendations for easy “plug and play.” Your receiver will automatically attempt to connect to the Internet.
Powerline Ethernet Adapter
Gaming Adapter
Ex ist in g
T1 POR ER
POW
Ethernet Cable
#
DMex
% HDMI
C LAN: Connect an Ethernet cable (not supplied) to this port.
Connect to the Internet
Gaming Adapter as Wireless Bridge
B
B DMex: Connect the small end of the USB cable to this port.
D HDMI OUT: Connect the L-shaped end of the HDMI cable to this port.
4
DC IN 9V
LAN OUT
z The rear view and location of the ports as shown may differ from your TV set.
5
Direct to Router
Verify Connection
a. Plug in the receiver and power on the TV. b. Once the receiver and TV are powered on, confirm the LED lights.
Powerline Ethernet Adapter El ec t
r ic al
Ethernet Cable
W ir i
Power LED
ng
Ethernet Cable
Network LED
NETWORK
ET
INTERN R POWE
Modem
Ethernet Cable
T1 POR
T2 POR
T3 POR
T4 POR
Wireless Router
T1 POR
T2 POR
ER
POW
R POWE
Standard Definition video: 802.11g High Definition video: 802.11n
T3 POR
When you see...
T4 POR
T1 POR
Router
T2 POR
T3 POR
T4 POR
R POWE
Router
Power LED
Receiver...
Green Red
is powered “On.” is not connected. Check all cable components. is in update mode. is connected to the Internet. has network activity.
Orange Network Green LED Blinking Green
Standard Definition video: HomePlug Turbo, HomePlug AV, UPA, HD-PLC High Definition video: HomePlug AV, UPA, HD-PLC
z If you need to configure a fixed IP address or proxy server, check the Operating Instruction Manual for more information.
6
Confirm Connection
7
Follow these instructions to confirm.
a. Press the DMeX button on your TV’s remote control to view the connection status.
Enter Region
It is strongly recommended that you complete Region Setup before using your receiver.
8
Attach Cable Cover
Slide the cable cover back into place.
a. Highlight the Internet Video icon at the bottom of the Settings menu on the XMBTM (XrossMediaBar®) and press .
z If “Feature available with DMeX module” appears on the screen, wait a few moments and try again.
b. Highlight Region and press
b. When you see the message “Configuration Successful,” press the HOME button on your TV’s remote control. These menu icons associated with the receiver will appear on the XMBTM (XrossMediaBar®).
.
Front of Receiver
c. Follow the on-screen instructions to complete the setup. z Default country is the United States. Press the B button to select a different country. Video Icon
DC IN 9V
LAN OUT
LAN
DC IN 9V
OUT
B
Network Icon
z IMPORTANT: Do not press the INPUT button on the remote control to access the BRAVIA™ Internet Video Link. It is available on the XMBTM. Internet Video Icon
z For attachment options to the TV, see the separate Attachment Guide.
Media Category Bar
Getting to Know Your Receiver
Using Your TV’s Remote Control with Your Receiver Use your Sony TV’s remote control with the DMeX button to operate the BRAVIATM Internet Video Link receiver. This receiver does not come with its own remote control. Button
Internet Video Guide BRAVIA Internet Video Link is a gateway that brings Internet videos straight to your BRAVIA TV.
Button description for receiver use
Displays the Control Panel in the Video Player
Returns to the previous screen or saves selections, depending on the screen
Opens the TV Home Menu/ XMBTM (XrossMediaBar ®) Look for the Internet Video icon on the Settings menu when connected
Make or confirm a selection
Move up, down, left or right on the screen
The videos in the Internet Video Guide are arranged in thumbnails. Each video’s title and parental guideline rating is labeled in the lower left-hand corner of the screen.
Launches My Page
1. Scroll between videos using the V/v/B/b buttons. To page up and down, press CH +/–. 2. Highlight the video you want to watch. 3. Press to open the video in the Video Player.
Displays Options menu to select additional features unique to the receiver
z In the Internet Video Guide, press OPTIONS and select Categories to view more videos.
Enters numbers
IMPORTANT: The Parental Lock function set on the TV will block video content based on the TV Rating. The Movie Rating will not block content with this receiver.
Page Up/Down
1. Press HOME on your TV’s remote control to access the Video menu on ® the XMBTM (XrossMediaBar ). 2. Press the v button to highlight the service content provider of your choice. 3. Press to open the Internet Video Guide with videos provided by the service content provider.
While in the Video Player Press...
To Do This
7/W
Zoom in/out (if available) View the control panel Stop video playback and return to Internet Video Guide Pause/play a video
Remote controls may vary. Shown with RM-YD018.
Display Options menu to zoom in and out
Video Player = Press to Pause the video during playback. Press again to Play. = Press the RETURN button to stop the video and return to the Internet Video Guide. = Press V/v to zoom in/out. z Original quality of the picture may be lost when zooming in or out.
While in the Internet Video Guide Press...
To Do This
View Home Category, view additional Categories, Sort by category, Save this Link
Page up/down in Internet Video Guide
My Video Links Follow the instructions below to save videos to My Video Links for quick and easy viewing. Save this Link 1. In the Internet Video Guide, highlight the video you wish to save. 2. Press the OPTIONS button and select Save this Link.
Helpful Hints and Troubleshooting
View My Video Links 1. Press the HOME button and highlight the Video menu. 2. Press the UP button to select My Video Links.
•
The receiver should be installed near an easily accessible power outlet.
•
To turn off or reset the receiver, unplug it from the wall.
•
Test the receiver’s connection before mounting it to your TV, especially if you are mounting the TV to a wall.
•
If icons related to the receiver do not appear as shown in step 6 of Setting up the BRAVIATM Internet Video Link, check your cable connections and Internet connection.
•
Make sure that the USB and the HDMI cables are connected to the receiver and to the corresponding ports on the TV set.
•
Verify your network connection by ensuring the Internet Video icon, shown to the right, appears on the XMBTM under the Settings menu.
•
If the screen is black, press the HOME button to access the XMBTM and select an icon associated with the receiver. Do not try to access the receiver using the INPUT button on the remote control. The HDMI input on the TV will not activate the receiver.
•
z The Favorites button on your TV’s remote control is specifically for TV channel Favorites.
(connected, green)
To view more videos while in the Internet Video Guide, press the OPTIONS button and select Categories. Select Home Category to return to the main page.
•
Some videos may not be available for viewing, depending on the TV’s Parental Lock.
•
Videos saved to My Video Links may not be available if they have been removed from the service content provider.
•
Your receiver will update software from time to time. See the Operating Instruction Manual for more details.
•
It is normal to see a black screen following an update or a reset of the receiver. To proceed, press the HOME button and select an icon from the XMBTM.
•
Recommended connection speed: Standard Definition video 2.5 Mbps, High Definition video 10 Mbps
•
To register your BRAVIATM Internet Video Link and access enhanced features, visit https://internet.sony.tv
•
To view or download the Operating Instruction Manual, visit http://internet.sony.tv/manual
•
A hard copy of the Operating Instruction Manual is available by calling 800-488-SONY (7669) or by visiting http://www.sony.com/accessories (handling charges may apply).
•
For further assistance, contact Sony at 866-918-BIVL (2485)
My Page You must complete Region Setup before accessing this feature. My Page gives you instant access to news, weather, and traffic information, all with the click of a button. To access My Page, press the shortcut button, DMeX, on your remote control. To control the news articles: 1. Press the B/b buttons on your TV’s remote control to change source. 2. Press the V/v buttons to change topics. 3. Press to view the full article in a new screen.
Messages From time to time, Sony and the service content providers will send important information to your Message Inbox. To open your Message Inbox: 1. Press HOME on your TV’s remote control to access the Network menu ® on the XMBTM (XrossMediaBar ). 2. Highlight the Messages icon and press . 3. Your Message Inbox will open. To read a message, highlight it using the V/v buttons and press .
Specifications Model Name: Network Video Receiver DMX-NV1
Dimensions (receiver alone): 4.1 x 6.4 x 1.3 inches (105.4 x 163.7 x 32.3 mm)
Power Requirement: AC 120V ~ 0.5A 60Hz External AC Adapter
Dimensions (with cable cover and stand): 4.1 x 8.8 x 4.3 inches (105.4 x 224 x 32.3 mm)
DC Input: 9V 1A 9W
Mass (receiver alone): 1.1 lbs (0.5 kg)
z The screen images shown above may differ from the actual images you see on your TV.
