Transcript
SFP Vi01310MM 1310 nm Multi-Mode SX Small Format Pluggable Fiber Transceiver
Features
• RoHS compliant • Compliant with Fast Ethernet standard • Compatible with SONET/SDH application • Industry standard small form pluggable (SFP) package • Duplex LC connector • Conforms to MultiSource Agreement for SFP • Distances of 2Km • Single power supply 3.3V • TTL signal detect indicator • Hot pluggable • Class 1 laser product complies with EN 60825-1 • Compatible with 62.5/125 um and 50/125 um fiber
Applications
• Switch-to-Switch interconnect • High speed wide bandwidth up and downlink
Vi01310MM is a 1310 nanometer SFP transmitting on multimode fiber. Compatible with the MultiSource Agreement (MSA), the Vi01310MM is designed to work with any device conforming to the MSA standards. The Vi01310MM is also compatible with 62.5/125 um fiber for distance of up to 2Km. The Vi01310MM is the perfect solution for interfacing with existing fiber cable installation for single/multiple camera transmission or short haul backbones.
Application Diagram
Vi3026
Vi01310MM
Absolute Maximum Ratings Parameter Storage Temperature
Min -40
Recommended Operating Conditions Max Units
Parameter
85
°C
Case Operating Temperature
Min -10
Max Units 70
°C
Supply Voltage
-0.5
4.0
V
Supply Voltage
3.1
3.5
V
Input Voltage
-0.5
Vcc
V
Supply Current
---
300
mA
Output Current
---
50
mA
Operating Current
---
400
mA
RoHS
The Smart Choice for Transmission Solutions
www.vigitron.com DSVi01310MM_0114
Technical Specifications Electrical
Ordering Information
Input/Output
AC/AC
Input Voltage
-0.5V
Supply Voltage
Maximum: -0.5V to 4.0V Recommended: 3.1V to 3.5V
Current
Output: 50mA Operating: 400mA Recommended: 250mA
Signal Detect
TTL
Compatible with
Fiber Channel 100-M5-SN-I and 100-M6-SN-I standard IEEE802.3z Gigabit Ethernet standard
Fiber Type
Multi-mode
Transmission Distance:
2Km
Transmission Speed:
100 Mbps Compatible with fast Ethernet standards
Wavelength:
1310nm
Environmental Temperature
Description 1310MM NM Multi-mode small format Vi01310MM pluggable fiber transceiver Part No.
Transmitter Electro-optical Characteristics Vcc = 3.1V to 3.5V, Tc = -10°C to 70°C (-40°C to +85°C) Parameter
Min
Typ.
Max
Units
Data Rate
10
155
200
Mb/s
Outpout Optical Power
-20
-14
dBm
Outpout Optical Power
-23.5
-14
dBm
62.5/125 μm fiber 50/125 μm fiber
Operating: 0°C to +70°C Storage: -40°C to +85°C
Mechanical
Extinction Ratio Center Wavelength
10 1270
Spectral Width (FWHM)
Dimensions
2.2 x .49 x 0.3 in (55.2 x 12.46 x 7.6mm)
Rise/Fall Time (10-90%)
Weight
0.035 lbs (15g)
Differential Input Voltage
Material
Metal Alloy
dB 1310
1380
nm nm
Fig 1
0.4
3
ns
2.0
V
Accessories Dust cover *Specifications subject to change without notice.
Receiver Electro-optical Characteristics Vcc = 3.1V to 3.5V, Tc = 10°C to +70°C Parameter
Min
Typ.
Max
Units
Data Rate
10
155
200
Mb/s
Optical Input Power-max.
-8
dBm
Optical Input Power-min.
(Sensitivity)
Operating Center Wavelength 1260 Data Output Rise, Fall Time
1
(10-90%)
Loss of Signal-Asserted
-31
dBm
1600
nm
2
ns
-32
dBm
Loss of Signal-Deasserted
-47
dBm
Loss of Signal-Hysteresis
1.0
dB
Differential Output Voltage
0.5
1.8
V
Receiver Loss of Signal Output Voltage-Low
0
0.5
V
Receiver Loss of Signal Output Voltage-High
2.4
Vcc
V
Note 1: The input data is at 155.52 Mbps, 2 23-1 PRBS data pattern with 72 “1”s and 72 “0”s inserted per the ITU-T recommendationG.958 Appendix 1. The receiver is guaranteed to provide output data with Bit Error Rate (BER) better than or equal to 1x10 -10.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 7810 Trade Street, Suite 100, San Diego, CA 92121, USA •
[email protected] • www.vigitron.com © Copyright 2013 Vigitron, Inc.
Notes Transmitter Section
The transmitter section consists of a 1310 nm LED in an eye safe optical subassembly (OSA) which mates to the fiber cable. The laser OSA is driven by a LD driver IC which converts differential input LVPECL logic signals into an analog laser driving current.
TX_DISABLE
The TX_DISABLE signal is high (TTL logic “1”) to turn off the laser output. The laser will turn on when TX_DISABLE is low (TTL logic “0”).
Receiver Section
The receiver utilizes an InGaAs PIN photodiode mounted togther with a trans-impedance preamplifier IC in an OSA. This OSA is connected to a circuit providing post-amplication quantization, and optical signal detection.
Receive Loss (RX_LOS)
The RX_LOS is high (logic “1”) when there is no incoming light from the companion transceiver. This signal is normally used by the system for the diagnostic purpose. The signal is operated in TTL level.
SPECTRAL WIDTH (FWHM) - nm
∆λ - TRANSMITTER OUTPUT OPTICAL
200
180
3.0
1.5
160 2.0
140
3.5
2.5
120 3.0 tr/f - TRANSMITTER OUTPUT OPTICAL RISE/FALL TIMES - ns
3.5
100
1200
1300
1320
1340
1360
1380
λ c- TRANSMITTER OUTPUT OPTICAL CENTER WAVELENGTH - nm
Fig 1 LED Spectral Width Limit
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 7810 Trade Street, Suite 100, San Diego, CA 92121, USA •
[email protected] • www.vigitron.com © Copyright 2013 Vigitron, Inc.
13.40
Notes
8.00
13.35 45.00 55.50
1.68
8.20
TX
6.25
RX
14.60 + 0.40
14.00
56.60
13.70
8.40
0.60 + 0.40
41.80 + 0.15
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 7810 Trade Street, Suite 100, San Diego, CA 92121, USA •
[email protected] • www.vigitron.com © Copyright 2013 Vigitron, Inc.
