Transcript
SFP Vi01310SM 1310 nm Single-Mode LX Small Format Pluggable Fiber Transceiver
Features
• Compliant with IEEE802.3z Gigabit Ethernet Standard • Compliant with Fiber Channel 100-SM-LC-L Standard • Conforms to MultiSource Agreement for SFP • Distances of 10km (1000Base-LX) • Duplex LC connector • Industry standard small form pluaggable (SFP) package • Single power supply 3.3V • TTL signal detect indicator • Hot pluggable • Class 1 laser produt complies with EN 60825-1 • Conforms to the multistandard Agreement (MSA) • Compatible 9/125um cable
Applications
• Switch-to-Switch interconnect • High speed wide bandwidth up and downlink Vi01310SM is a 1310 nanometer SFP transmitting on singlemode fiber. Compatible with the MultiSource Agreement (MSA), the Vi01310SM is designed to work with any device conforming to the MSA standards. The Vi01310SM compatible with 9/125um fiber for distances up to 10km (over 6 miles). The Vi01310SM is the perfect solution for interfacing between network switches and Network Video Recorders over long distances.
Application Diagram
Vi3026
Vi01310SM
Absolute Maximum Ratings Parameter
Min
Max Units
Recommended Operating Parameter
Min
Max Units
-40
85
°C
Case Operating Temperature
0
70
°C
Supply Voltage
-0.5
4.0
V
Supply Voltage
3.1
3.5
V
Input Voltage
-0.5
Vcc
V
Supply Current
---
250
mA
Output Current
---
50
mA
Operating Current
---
400
mA
Storage Temperature
RoHS
The Smart Choice for Transmission Solutions
www.vigitron.com DSVi01310SM_0114
Technical Specifications Electrical
Ordering Information
Input/Output
AC/AC
Input Voltage
-0.5V
Supply Voltage
Maximum: -0.5V to 4.0V Recommended: 3.1V to 3.5V
Current
Output: 50mA Operating: 400mA Recommended: 250mA
Description 1310SM NM Single-mode small format Vi01310SM pluggable fiber transceiver
Part No.
Transmitter Electro-optical Characteristics
Signal Detect
TTL
Compatible with
IEEE 802.3z, Fiber Channel 100-SM-LC-L
Fiber type
SingleMode
Transmission speed
1.00Gbps
Outpout Optical Power
Wavelength
1310nm
Extinction Ratio
Distance
10Km
Center Wavelength
Environmental Temperature
Operating: 0°C to +70°C Storage: -40°C to +85°C
Mechanical Dimensions
2.2 x .49 x 0.3 in (55.2 x 12.46 x 7.6mm)
Weight
0.035 lbs (15g)
Material
Metal Alloy
Accessories
Vcc = 3.1V to 3.5V, Tc = 0°C to +70°C (-40°C to +85°C) Parameter 9/125 μm fiber
Min
Typ.
-9.5
Max
Units
-3
dBm dB
9 1355
nm
Spectral Width (RMS)
2.5
nm
Rise/Fall Time, (20-80%)
260
ps
Relative Intensity Noise
-120
dB/Hz
Total Jitter
227
ps
Output Eye
1270
1310
Compliant with IEEE802.3z
Max. Pout TX-Disable Asserted Differential Input Voltage
0.4
-45
dBm
2.0
V
Max
Units
3V Single-power supply (optional) *Specifications subject to change without notice. **Distances are based on indicated power at the PD input and are obtained using Cat-5e cable, 56V power supply. Factors such as cabling, connections and environmental conditions may affect actual distances and should be taken into consideration.
Receiver Electro-optical Characteristics Vcc = 3.1V to 3.5V, Tc = 0°C to +70°C Parameter Optical Input Power-max.
Min
(Sensitivity)
Operating Center Wavelength 1260
dBm nm dB
-20
0.5
Data Output Rise, Fall Time (20-80%)
dBm dBm
-35
Stressed Receiver Sensitivity Differential Output Voltage
-20 1610
12
Signal Detect-Asserted Signal Detect-Deasserted
dBm
-3
Optical Input Power-min.
Optical Return Loss
Typ.
-14
dBm
1.2
V
0.35
ns
Receiver Loss of Signal Output Voltage-Low
0
0.5
V
Receiver Loss of Signal Output Voltage-High
2.4
Vcc
V
Note 1: Measured with conformance test signal at TP3 for BER= 10 at the eye center. Note 2: Meausred with a transmit signal having a 9 dB extinction ratio. If another extinction ratio is used, the Stressed receiver sensitivity should be corrected for the extinction ratio penalty.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 7810 Trade Street, Suite 100, San Diego, CA 92121, USA •
[email protected] • www.vigitron.com © Copyright 2013 Vigitron, Inc.
Notes Transmitter Section
The transmitter section consists of a 1310 nm InGaAsP laser in an eye safe optical subassembly (OSA) which mates to the fiber cable. The laser OSA is driven by a LD driver IC which converts differential input LVPECL logic signals into an analog laser driving current.
TX_DISABLE
The TX_DISABLE signal is high (TTL logic “1”) to turn off the laser output. The laser will turn on when TX_DISABLE is low (TTL logic “0”).
Receiver Section
The receiver utilizes an InGaAs PIN photodiode mounted togther with a trans-impedance preamplifier IC in an OSA. This OSA is connected to a circuit providing post-amplication quantization, and optical signal detection.
Receive Loss (RX_LOS)
The RX_LOS is high (logic “1”) when there is no incoming light from the companion transceiver. This signal is normally used by the system for the
13.40
diagnostic purpose. The signal is operated in TTL level.
8.00
13.35 45.00 55.50
1.68
8.20
TX
6.25
RX
14.60 + 0.40
14.00
56.60
13.70
8.40
0.60 + 0.40
41.80 + 0.15
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 7810 Trade Street, Suite 100, San Diego, CA 92121, USA •
[email protected] • www.vigitron.com © Copyright 2013 Vigitron, Inc.
