Transcript
SFP10G SFP10G-CWDM-LR+-SO CWDM SFP+, 10Gbps, 1270nm to 1610nm (20nm Steps), 10dB, with DOM
General Description The SFP10G-CWDM-LR+-SO optical transceivers are designed for Storage, IP network and LAN. The transceiver is a hot pluggable module in the Z-direction Z direction that is mainly usable in typical router/switch line card applications. In addition, they comply with the SFP Multi Sourcing Agreement (MSA). This transceiver uses a temperature rature Stabilized CWDM laser transmitter to achieve 10km 0km over standard single mode fibre as 10GBASE-LR R of the IEEE 802.3ae. 802.3ae
Product Features •
Operating data rate up to 10.3Gbps 10.
•
18-Wavelength Wavelength CWDM DFB LD transmitter from 1270nm to 1610nm, 0nm, with steps of 20nm 20
•
10dB power budget guaranteed
•
Single 3.3V power supply and TTL logic interface i
•
Duplex LC connector interface nterface
•
Hot pluggable
•
Operating case temperature emperature standard: 0°C to +70°C
•
Compliant with MSA SFP specification s
•
Digital diagnostic monitor interface (also called DOM or DDM)
•
Compliant to SFP+ Electrical Electr MSA SFF-8431
1 www.Solid-Optics.com
SFP10G SFP10G-CWDM-LR+-SO CWDM SFP+, 10Gbps, 1270nm to 1610nm (20nm Steps), 10dB, with DOM
Product Selection Wavelength(nm) Nomenclature Min.
Typ.
Max.
SFP10G-CWDM1270-LR+-SO
1264.5
1270
1277.5
SFP10G-CWDM1290-LR+-SO
1284.5
1290
1297.5
SFP10G-CWDM1310-LR+-SO
1304.5
1310
1317.5
SFP10G-CWDM1330-LR+-SO
1324.5
1330
1337.5
SFP10G-CWDM1350-LR+-SO
1344.5
1350
1357.5
SFP10G-CWDM1370-LR+-SO
1364.5
1370
1377.5
SFP10G-CWDM1390-LR+-SO
1384.5
1390
1397.5
SFP10G-CWDM1410-LR+-SO
1404.5
1410
1417.5
SFP10G-CWDM1430-LR+-SO
1424.5
1430
1437.5
SFP10G-CWDM1450-LR+-SO
1444.5
1450
1457.5 57.5
SFP10G-CWDM1470-LR+-SO
1464.5
1470
1477.5 77.5
SFP10G-CWDM1490-LR+-SO
1484.5
1490
1497.5 97.5
SFP10G-CWDM1510-LR+-SO
1504.5
1510
1517.5 17.5
SFP10G-CWDM1530-LR+-SO
1524.5
1530
1537.5 37.5
SFP10G-CWDM1550-LR+-SO
1544.5
1550
1557.5 57.5
SFP10G-CWDM1570-LR+-SO
1564.5
1570
1577.5 77.5
SFP10G-CWDM1590-LR+-SO
1584.5
1590
1597.5 97.5
SFP10G-CWDM1610-LR+-SO
1604.5
1610
1617.5 17.5
2 www.Solid-Optics.com
SFP10G SFP10G-CWDM-LR+-SO CWDM SFP+, 10Gbps, 1270nm to 1610nm (20nm Steps), 10dB, with DOM
Optical Characteristics No. 1 2
Parameters Transmitter Center Wavelength Signaling speed
Symbols
Min.
Typ.
λc
λc -6.5 -
λc 10.3125
Max. λc ＋6.5 -
Unit nm Gbit/s
3
Extinction Ratio
ER
3.5
4
Optical Output Power Transmitter and Dispersion Penalty Side mode suppression ratio
Pf
-5
-
0
dBm
TDP
-
-
3.0
dB
SMSR
-
-
30
dB
-
0.1
0.26
UI
5 6
dB
7
Optical Rise/Fall Time
Txj1
8
Avarage Launch Power
Poff
-40
dBm
Rsense
-15
dBm
1610 -20
dBm nm dBm dBm dB
Max. 3.46 300
Unit V mA
2000 Vcc+0.3 0.8 10
ohm mV V V us
9 10 11 12 13 14
Receiver Receiver Sensitivity @10.5Gb/s Max Input Power Wavelength Range LOS De-Assert LOS Assert LOS Hysteresis
Pmax W LOSD LOSA c
0.5 1270
Remarks
-
-28 0.5
Average
Electrical Performance No. 1 2 3 4 5 6 7 8 9 10 11 12
Parameter Main Voltage Supply Current Transmitter Input differential Data input swing Transmit Disable Transmit Enable Trnasmit Assert Time Receiver Data output swing Data output rise time Data output fall time LOS De-assert LOS Assert
Symbol
Min. 3.14
Typ. 3.3
ohm Vin Vd Ven
500 2.0 0
100 -
Vout tr tf
370 30 30 2.0 0
VCC Icc
2000
Vcc+0.3 0.8
Remarks
mV ps ps V V 3
www.Solid-Optics.com
SFP10G SFP10G-CWDM-LR+-SO CWDM SFP+, 10Gbps, 1270nm to 1610nm (20nm Steps), 10dB, with DOM
Absolute Maximum Conditions No. 1 2 3
Parameter Main Voltage Storage Temperature Case Operating Temperature
Symbol VCC Ts Tcase
Min. 3.15 -40 -5
Typ.
Max. 3.45 450 70
Unit V
Remarks
°C °C
Dom Parameters Values Parameter
Unit min.
Transponder Temperature Monitor Accuracy1) Laser Bias Current Monitor Accuracy Transmit Power Monitor Accuracy3) Receive Power Monitor Accuracy
3)
2)
typ.
max.
-5
+5
°C
-10
+10
%
-3
+3
dB
-3
+3
dB
4 www.Solid-Optics.com
