Transcript
4. Specifications
HOME & BUSINESS SECURITY
It’s all on the web Camera Specifications: Image Sensor Minimum Illumination Transmission Frequency Battery Type/Capacity
1/3” CMOS 1.5 Lux / F1.5 ISM 2.4~2.483 MHz (4 CH*) Lithium Battery / 500 mAh
Charge Time Work Time Power Supply Camera Dimensions (W x D x H) Operating Temperature Range
2 hr. charge Up to 5 hrs (less in IR mode) +5V (DC), 700 mA 3.5” x 1.25” x 1.25” 10cm x 3cm x 3cm( 14 F ~ 122 F -10 C ~ 50 C
° °
2.4 GHz Wireless Color Video System with Rechargable Lithium Battery
Product Information
Specification Sheets
User Manuals
Software Upgrades
Quick Start Guides
Firmware Upgrades
Model SG8840
° °
Wireless Receiver Specifications: Receiving Frequency Video Output Level Audio Output Level Power Supply Consumption Current Unobstructed Range Receiver Dimensions (W x D x H) Operating Temperature Operating Humidity
ISM 2.4~2.483 MHz (4 CH*) 1 Vp-p@75OHM,S/N>38DB 1 Vp-p@600OHM 8V (DC) 180 mA Up to 328 ft. / 100 meters ** 4” x 0.75” x 3.25” 10cm x 2cm x 8.5cm( 14 F ~ 122 F -10 C ~ 50 C 85% RH
° °
° °
* 4 Available channels for optimal signal. ** Maximum open space transmission range. Actual range dependent upon building materials and other obstructions in path of wireless signal.
Dimensions:
VISIT www.lorexcctv.com LOREX Technology Inc. Copyright © 2006 LOREX Technology Inc. As our products are subject to continuous improvement, LOREX and its subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE
Quick Setup Guide
Wireless Disclaimer This product broadcasts over public airways and its video and audio signals may be intercepted without your consent.
1. Confirm Package Contents
1 x 2.4 GHz Wireless Color Camera with Adjustable Stand
1 x Wireless Receiver, Antenna and Bracket
2. Camera & Receiver Setup
3. Viewing the Camera
1. Set up the Camera:
3. Viewing the Camera
A: Mount the camera to a wall, ceiling or tabletop using the supplied screws, or leave unattached for portability. B: Connect the 5V power adapter to the camera (make sure the camera is OFF). Plug the Adapter into a wall outlet. Note: The camera needs to be charged for 2 hours before it can run on battery power.
IMPORTANT: You may find some static on the picture at a selected channel setting.
2. Set up the Wireless Receiver:
• • • • • • • • •
Turns your TV into a Video Security System Install and Operate in less than 1 minute Portable - Move the camera from room to room Integrated rechargable Lithium battery powers the camera for up to 5 hours Audio Monitoring 4 Channels available for selecting optimum clear reception 300 ft. wireless transmission (open space) * Automatic IR illumination provides B&W Video images in low light conditions ** Record picture to any standard VCR / DVR
* Maximum open space transmission range. Actual range dependent upon building materials and other obstructions in path of wireless signal. ** IR illumination range of 12ft. under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application..
A: Power up the Camera and Receiver B: Set the Camera to CH1 (the Wireless Receiver is set to CH1 by default) C: Set the Monitor / TV to Video Mode - See your specific MONOTOR / TV Manual for further information.
YOU SHOULD NOW SEE LIVE VIDEO ONSCREEN!
1 x AV Cable 1 x Power Adapter for Camera 1 x Power Adapter for Wireless Receiver
Features:
The camera can be viewed immediately (with the AC Adapter connected from the camera to a wall outlet), however if portability is desired, the Cameras’ Lithium Battery much be charged for 2 hours. The Camera is charged when the Charge Light Indicator goes dark.
A: Attach the Wireless Receiver to the bracket. B: Attach the Antenna to the Wireless Receiver C: Connect the 8V power adapter to the Wireless Receiver (make sure the receiver is OFF). Plug the Adapter into a wall outlet. D: Connect the Wireless Receiver to a Monitor/TV using the AV Cable:
For optimum viewing reception, you may need to change the channels on BOTH the Camera and Receiver (between CH1-CH4). BOTH the Camera and Receiver must be set to a matching channel.
•Connect the Black end to the Receiver •Connect the Yellow/Red plugs to the VIDEO/ AUDIO port on the TV
If Static persists on your image, try adjusting the Antenna on the Wireless Receiver and Camera, or reposition the camera.
