Transcript
SGA-6589
Product Description
DC-3500 MHz, Cascadable SiGe HBT MMIC Amplifier
Sirenza Microdevices SGA-6589 is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring 1 micron emitters provides high F T and excellent thermal perfomance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. At 850 Mhz and 80mA , the SGA6589 typically provides +32.5 dBm output IP3, 25.5 dB of gain, and +21.5 dBm of 1dB compressed power using a single positive voltage supply. Only 2 DC-blocking capacitors, a bias resistor and an optional RF choke are required for operation.
Product Features High Gain : 20 dB at 1950 MHz Cascadable 50 Ohm Patented SiGe Technology
Gain & Return Loss vs. Frequency VD= 4.9 V, ID= 80 mA (Typ.) 32
Operates From Single Supply Low Thermal Resistance Package
0
Gain (dB)
24
-10
IRL ORL
16
-20
8
-30
0
Return Loss (dB)
GAIN
Applications PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite
-40 0
1
2 3 Frequency (GHz)
S y mbol G
4
5
P arameter S mall S i gnal Gai n
U nits
Frequency
Min.
Ty p.
Max.
dB
850 MHz 1950 MHz 2400 MHz
23.0
25.5 20.0 18.2
28.1
P 1dB
Output P ower at 1dB C ompressi on
dB m
850 MHz 1950 MHz
21.5 19.0
OIP 3
Output Thi rd Order Intercept P oi nt
dB m
850 MHz 1950 MHz
32.5 32.0
B andwi dth D etermi ned by Return Loss (>9dB )
IRL
MHz
4000
Input Return Loss
dB
1950 MHz
13.1
Output Return Loss
dB
1950 MHz
9.2
NF
Noi se Fi gure
dB
1950 MHz
3.0
VD
D evi ce Operati ng Voltage
V
4.5
4.9
5.3
ID
D evi ce Operati ng C urrent
mA
72
80
88
ORL
RTH, j-l
Thermal Resi stance (juncti on to lead)
Test Conditions:
VS = 8 V RBIAS = 39 Ohms
°C /W
ID = 80 mA Typ. TL = 25ºC
97
OIP3 Tone Spacing = 1 MHz, Pout per tone = 0 dBm ZS = ZL = 50 Ohms
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the users own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2001 Sirenza Microdevices, Inc.. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC 1
http://www.sirenza.com EDS-101268 Rev. C
Preliminary SGA-6589 DC-3500 GHz Cascadable MMIC Amplifier Typical RF Performance at Key Operating Frequencies Sy mbol
G
Parameter
Frequency (MHz) Frequency Frequency (MHz)(MHz)
U nit
100
500
850
1950
2400
3500
dB
28.4
27.1
25.2
19.8
18.2
15.1
32.1
32.5
32.0
30.3
Small Si gnal Gai n
OIP3
Output Thi rd Order Intercept Poi nt
dB m
P 1dB
Output Power at 1dB C ompressi on
dB m
21.6
21.5
19
17.8
IRL
Input Return Loss
dB
13.9
15.0
15.6
13.1
12.4
11.4
ORL
Output Return Loss
dB
16.1
13.5
11.4
9.2
9.4
10.6
S 12
Reverse Isolati on
dB
30.3
29.8
28.7
24.3
23.1
19.2
NF
Noi se Fi gure
dB
2.5
2.5
2.9
3.3
VSS== 88 V V V Test TestConditions: Conditions: = 39 Ohms RBIAS R BIAS= 39 Ohms
80 mA mA Typ. Typ. IIDD == 80 25ºC TTLL == 25ºC
OIP33 Tone Tone Spacing Spacing == 11 MHz, MHz, Pout Pout per per tone tone == 00 dBm dBm OIP 50 Ohms Ohms ZZSS== ZZLL== 50
Absolute Maximum Ratings Noise Figure vs. Frequency
Parameter
Absolute Limit
Max. Device Current (ID)
160 mA
Max. Device Voltage (VD)
7V
4
Max. RF Input Pow er
+16 dBm
3
Max. Junction Temp. (TJ)
+150°C
Operating Temp. Range (TL)
-40°C to +85°C
Max. Storage Temp.
+150°C
VD=4.9 V, ID= 80 mA
Noise Figure (dB)
5
2
TL=+25ºC
Operation of this device beyond any one of these limits may cause permanent damage. For reliable continous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one.
1 0 0
0.5
1
1.5 2 Frequency (GHz)
2.5
3
Bias Conditions should also satisfy the follow ing expression: IDVD < (TJ - TL) / RTH, j-l
OIP3 vs. Frequency
P1dB vs. Frequency
VD= 4.9 V, ID= 80 mA
VD= 4.9 V, ID= 80 mA
24
40
22 P1dB (dBm)
OIP3 (dBm)
35 30 25
20 18 16
TL=+25ºC
TL=+25ºC
14
20 0
0.5
1 1.5 2 Frequency (GHz)
522 Almanor Ave., Sunnyvale, CA 94085
2.5
0
3
Phone: (800) SMI-MMIC 2
0.5
1 1.5 2 Frequency (GHz)
2.5
3
http://www.sirenza.com EDS-101268 Rev. C
Preliminary SGA-6589 DC-3500 GHz Cascadable MMIC Amplifier
|S | vs. Frequency
|S | vs. Frequency
21
11
VD= 4.9 V, ID= 80mA
32
0
-10 |S11| (dB)
24 |S21| (dB)
VD= 4.9 V, ID= 80 mA
16
8
0 0
1
2 3 4 Frequency (GHz)
-30
+25°C -40°C +85°C
TL 5
-20
-40 6
0
1
|S | vs. Frequency
5
6
22
VD= 4.9 V, ID= 80 mA
0
-10 |S22| (dB)
-15 |S12| (dB)
2 3 4 Frequency (GHz)
|S | vs. Frequency
12
VD= 4.9 V, ID= 80 mA
-10
+25°C -40°C +85°C
TL
-20
-25
-30 0
1
2 3 4 Frequency (GHz)
-30
+25°C -40°C +85°C
TL 5
-20
+25°C -40°C +85°C
TL -40 6
0
1
2 3 4 Frequency (GHz)
5
6
* Note: In the applications circuit on page 4, RBIAS compensates for voltage and current variation over temperature.
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC 3
http://www.sirenza.com EDS-101268 Rev. C
Preliminary SGA-6589 DC-3500 GHz Cascadable MMIC Amplifier Basic Application Circuit Application Circuit Element Values
R BIAS
VS
1 uF
1000 pF
500
850
1950
2400
3500
CB
220 pF
100 pF
68 pF
56 pF
39 pF
CD
100 pF
68 pF
22 pF
22 pF
15 pF
LC
68 nH
33 nH
22 nH
18 nH
15 nH
CD LC
4 1 SGA-6589 3
RF in
RF out CB
2
CB
Frequency (Mhz)
Reference Designator
Recommended Bias Resistor Values for ID=80mA RBIAS=( VS-VD ) / ID Supply Voltage(VS) RBIAS
12
8V 39
10 V
12 V
62
91
Note: RBIAS provides DC bias stability over temperature.
VS RBIAS
1 uF Mounting Instructions
1000 pF A65
6V
LC
CD
1. Solder the copper pad on the backside of the device package to the ground plane. 2. Use a large ground pad area with many plated
CB
CB
through-holes as shown. 3. We recommend 1 or 2 ounce copper. Measurement for this data sheet were made on a 31 mil thick FR-4 board with 1 ounce copper on both sides.
Part Identification Marking The part will be marked with an A65 designator on the top surface of the package. 4
A65
Function
1
RF IN
RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation.
2, 4
GND
Connection to ground. For optimum RF performance, use via holes as close to ground leads as possible to reduce lead inductance.
3
3
3
2
2
1
1
Pin #
RF OUT/ RF output and bias pin. DC voltage is BIAS present on this pin, therefore a DC blocking capacitor is necessary for proper operation.
Part Number Ordering Information
Caution: ESD sensitive
Appropriate precautions in handling, packaging and testing devices must be observed.
522 Almanor Ave., Sunnyvale, CA 94085
Description
Part Number
Reel Size
Devices/Reel
SGA-6589
13"
3000
Phone: (800) SMI-MMIC 4
http://www.sirenza.com EDS-101268 Rev. C
Preliminary SGA-6589 DC-3500 GHz Cascadable MMIC Amplifier PCB Pad Layout
Dimensions in inches [millimeters]
Nominal Package Dimensions
Dimensions in inches [millimeters] Refer to package drawing posted at www.sirenza.com for tolerances.
Bottom View
Side View
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC 5
http://www.sirenza.com EDS-101268 Rev. C
