Transcript
LSB 300 Instructions • Note: Dial 100 on Intercom Phone for Assistance
VCR
DVD AUX DOC LTOP PC
NOTE: SOURCE Buttons #3 & 4 ARE “TOGGLE” FUNCTION. BUTTON COLOR IS AMBER FOR UPPER SOURCE & RED FOR LOWER SOURCE.
SELECTING A VIDEO OR COMPUTER SOURCE
Extron Controller Image #1
Turn on the LCD Display monitor with the DISPLAY ON button located on the Extron controller. Select a source by pressing the button corresponding to the device that you want to use (selection area located in the middle) (see Image #1). Volume knob is used for playback control of all media sources with audio.
TO DISPLAY VHS VIDEO 1. Turn on DISPLAY on Extron controller (see Image #1). 2. Press the VCR button for VHS video on the Extron Control Panel to display picture. 3. Turn on the VCR player by pressing the power button on the left side of the machine. Function operations (Play, Pause, Stop, Rewind, and Fast Forward) are performed by buttons and a round wheel on the right side of the machine. There is a handheld remote control located under a sliding top on the teaching station below the Document Camera for menu operations. Insert a VHS tape and press play. TO DISPLAY DVD VIDEO 1. Turn on DISPLAY on Extron controller (see Image #1). 2. Press the DVD button for DVD video on the Extron Control Panel to display picture. 3. Turn on the DVD player by pressing the power button on the far-left side of the machine. Function operations are performed by the buttons (Play, Pause, and Stop) on the right side of the machine. There is a handheld remote control located under a sliding top on the teaching station below the Document Camera for menu operations. Insert a DVD disc to play.
10/7/2013
Doc#2013300
LSB 300 Instructions LAPTOP COMPUTER 1. Connect laptop to input panel located on side of teaching station using the cables provided. VGA (Video) cables are stored under a sliding top on the teaching station. 2. Turn on DISPLAY and press button LTOP on Extron Controller. Button switch Toggles, when Amber the Laptop is selected. If button shows Red push again until Amber. (see Image #1). 3. Boot up computer (Select a key combination on laptop of the FN key, located in the lower left corner of the keyboard, plus one Function key, located in the top row of the keyboard). All computer manufacturers use a different top row key. For example, Dell manufacturer uses the combination of FN + F8 to turn on their laptop video output. LOCAL COMPUTER 1. The built-in Windows computer can be powered up by accessing the machine behind doors located in the teaching station cabinet. 2. Turn on DISPLAY and press PC button on Extron controller to view local computer. Button switch Toggles, when Red the PC is selected. If button shows Amber push again until Red. (see Image #1).
DOCUMENT CAMERA Turn on DISPLAY and press DOC button on Extron Controller. Button switch Toggles, when Red the Document Camera is selected. If button shows Amber push again until Red. (see Image #1). DOCUMENT CAMERA ASSEMBLY & CONTROLS 1. Grasp green ring and pull up (see Images #2A and #2B). 2. Grasp camera head and rotate camera up (see Images #2C and #2D). 3. Auto-focus on/off and Zoom in/out buttons are on camera (see close-up Image #2E). 4. Power and Light buttons are on base (see close-up Image #2F). A
B
C
D
E
F
Document Camera Images# 2 A-F
5. To store, rotate camera so lens points towards light, pull forward and down on green ring.
10/7/2013
Doc#2013300
LSB 300 Instructions DOCUMENT CAMERA CONTROL 1. Press the POWER button located on the upper left of Document Camera stage to turn on Document Camera. A green LED will illuminate (see Image #2F). 2. Press the LIGHT button located next to the POWER button (see Image #2F). 3. Place media on Document Camera stage. The unit will auto focus and adjust brightness automatically. • Zooming in or out can be done by using the Zoom Wheel located on top right side of the camera head. The auto focus on/off button is also located on the right of the camera head. A light above the button indicates auto focus is on (see Image #2E). • A remote for the Document Camera is located in the accessory drawer in the teaching station. All basic functions can be performed without the remote. However some advanced functions can be done only with the remote. For the advanced functions please contact ITS for a demonstration and/or training at 35659.
AUXILIARY VIDEO • Turn on DISPLAY and press button AUX when using a portable video source, such as a camcorder. Audio-Video cables from the video source plug into input panel located on the teaching station. Button switch Toggles, when Amber AUX Video is selected. If button shows Red push again until Amber (see Image #1).
ADJUST AUDIO • This room has a single audio system used for media playback. To control the audio volume of any source, i.e. video or computers, use the Extron volume knob (see Image #1). The LED lights displayed will indicate increased or decreased volume.
POWER OFF – Press the DISPLAY OFF Button located on the Extron Controller (see Image #1).
Call 3-5659 for individual or group instruction in media equipped classrooms Please send suggestions for improving these instructions to
[email protected] 10/7/2013
Doc#2013300
