Shield 200 Wireless Indoor Ip Camera - English

Transcript

VOH1012 Illustration Specifications 1. LED lights Indications: Red blinking: In Wi-Fi setup mode Red on: Not connected Blue blinking: connecting to the local network Blue on: connected to the local network 2. Lens (3.6mm) 3. IR LEDs for night vision 4. TF card Slot 5. Microphone 6. Speaker 7. Reset button / WPS 8. Power USB Slot 9. QR Code Image sensor: H.264, CMOS Sensor resolution: 1280*720 CMOS Focal: 3.6mm, Aperture: F2.0 (IR Lens) Vision scope: 90 Refresh frequency: up to 25 pictures/sec Built in Microphone and speaker Wi-Fi: IEEE 802.11b/g/n 12 IR LEDs for night vision Supports up to 32GB TF Card Power supply: 5V 1A, AC100-240V/USB Jack Compatible with smartphones under iOS 7.0 and Android 4.0 (or higher) Connection to ViewOnHome APP Controls on Connect ViewOnHome to APP 1.Click the center or“+”to add your Camera. 2.For the first time, choose“WiFi Connect”. 1.Enter your username and password to Login. Android and iOS apps 3.Select the Wi-Fi network which your camera will be connected. Enter the password of the Wi-Fi network and press “Connected” 4.Camera Setting. 5. Short press to monitor the area. To get started, download the ViewOnHome App from Apple’s App store or the Google Play Store. Box content --IP CAMERA x1 --AC/DC adaptor x1 --USB Cable x1 --User Manual x1 --Mounting screw kit x1 Noted: If the camera is connected to your Wi-Fi network, you can choose“Manual adding”, “LAN adding”to add the camera. Power on Connect AC/DC adaptor to camera via USB cable, then plug the adaptor into the mains. Reset Press and hold the reset button (about 10 seconds) until LED light OFF. Then LED lights Indication will be blink with Red color. 2. For the first time, please create an APP account by pressing "Quick Register". Wi-Fi Setup Mode Camera on/off View next camera View last camera Record a video Take a picture FAQ Camera Mounting 1.Device Information: Rename the camera and change password 2.QR Code: View the QR code of the camera 3.Record Mode: Turn off/24 hours Record/Alarm Record 4.Device Version: Check the FW version or SD card capacity 5.Unbundle the device: Disconnect the camera from the APP To mount the Camera to the wall, place the camera in a position to ensure the most comprehensive view for video monitoring. Remove the plate on the base support of the camera. The dots on the base of the cmera indicate the location of the expansion bolts. Insert the expansion bolts into the drilled holes. Use a screwdriver to tighten or loosen the screws and secure the camera. Connect the device cables. Hold and talk Press and hold the WPS button (about 3 seconds) until LED light turns OFF. Then LED lights Indication will be blink with blue color, the IP Cam will connect the router WIFI automatically after you press the router WPS button about 3 seconds. (Note: WPS function only works if your router supports WPS. ) 1 Video quality Sound on/off In Wi-Fi setup mode the LED will blinking in RED. WPS Camera setting 2 3 4 5 6 7 8 9 10 11 12