Transcript
MEGHALAYA URBAN DEVELOPMENT AUTHORITY Shillong – 793001
CORRIGENDUM TO TENDER NOTICE NO. MUDA/MON/3/PT-I/2010-11/170 DATED 4TH OCTOBER, 2012.
Name of Work:
SUPPLY OF INTELLIGENT TRANSPORT SYSTEM FACILITIES FOR BUSES IN SHILLONG CITY UNDER JNNURM
Corrigendum:
1. Modified Technical Specifications Annexed. 2.
PIS for Bus Stops is Deleted.
3. Specifications for Closed Circuit Television System (pages 14 – 24) of previous tender document replaced by Item No. 17 & 18 of Technical Details of Modified Technical Specifications.
Shillong, Meghalaya, India
Phone : +91-0364-2227967 Fax : +91-0364-2227844
MEGHALAYA URBAN DEVELOPMENT AUTHORITY Shillong – 793001
Dated Shillong, the 17h October 2012.
No. MUDA /MON/3/Pt-I 2010–11/174
CORRIGENDUM In partial amendment to Tender Notice No. MUDA/MON/3/Pt-I/2010-11/170 dated 4th October, 2012 for Intelligent Transport System (ITS) components and Multiplexing for Buses under JnNURM, Shillong, the modified technical specifications are hereby annexed to the tender document which may be viewed/downloaded from the website www.smb.gov.in. The item PIS for Bus Stops is not required and hence deleted. The date of submission of tender is extended to 15:00 hrs on 31st Oct. 2012 which will be opened on the same date at 15:30 hrs. There will be no pre-bid meeting in view of shortage of time. However, in case of any queries / clarification interested parties may email at
[email protected] Other terms and conditions remain unchanged.
- Sd /Secretary Meghalaya Urban Development Authority, Shillong.
MODIFIED TECHNICAL SPECIFICATIONS
SCOPE OF WORK 1. General Requirements. 1.1 The bidder should provide the required IT infrastructure hardware and software components to implement the respective solution defined in the SRS. 1.2 The bidder shall supply the required equipment and devices to build a Close Circuit Television solution should have Control and Command Centre/Operational Control Centre facility for administration and monitoring. 1.3 The bidder shall provide preferably rack based servers with appropriate accessories, monitoring and management tools. 1.4 The bidder shall provide appropriate storage capacity for the total solution. 1.5 The bidder should provide required networking operational communication network including necessary hardware/equipment for respective domain. 1.6 The system network shall be designed in a way to meet performance requirements for the system such that it is adaptable and can meet the changing business requirements including reliability, new software applications or service additions, high availability and security. 1.7 The system shall be designed with confidentiality and security of data as a priority and its design will include levels of redundancy, fault tolerance and disaster recovery based on business requirements. 1.8 The bidder shall be required to design, supply, install, test, commission, operate and maintain all components of the network for their respective domain. 1.9 The entire Network shall be managed through a dashboard style of Graphical User Interface (GUI) 1.10 The bidder shall provide 3rd party Software, wherever required, to complete the required functionality of the respective domain. 1.11 The bidder shall provide necessary mechanism with process to report faults and its resolution to measure and monitor SLA (system level agreement) 1.12 The bidder shall provide the required Software Development Kit (SDK) and Application Programming Interfaces(APIs) to enable integration with various systems. 1.13 The bidders should provide the required backend solution based on objective and minimum requirements. The supplier is required to supply, design, install, test, commission, operate and maintain the solution for the various systems as defined in the scope for the respective parts including manpower but not limited to: i) All required IT Hardware infrastructure and software including server at Data Center. ii) All required infrastructure and software which should include a. Base Station with Control Centre. b. Database and software to store CCTV surveillance and record information. c. CCTV Application. d. Surveillance Review software with zoom, store, forward and backward viewing facility of downloaded data. e. Backup and restore facility for the solution. iii) All requirements 3rd party Software such as Operating System, Antivirus etc. iv) All requirements licenses to make CCTV operational. v) Furniture and fixture required for operation. 2 Operational Control Centre (OCC)/ Control & Command Centre 2.1 An Operational Control Centre would be established at MUDA Office for regular monitoring, operations, reports printing related work under CCTV. The required LCD screen, computer hardware, software, printer, UPS network, connectivity, antivirus, Air Conditioners, furniture & fixture will be delivered as per schedule. The required space & electric connection / GSM Connections / Lease Lines for establishing an OCC will be provided and bear by MUDA. 2.2 Delivery of Materials and Related Documentation: The successful bidder shall submit all documents on System Architecture, installation Procedure, / drawing for all equipment’s, details of fault diagnostics, operating and maintenance manuals, FAT and SAT report of all equipment.
2.3 The successful bidder shall supply the following set of documents. All documents shall be English Language. An index of all handbooks, drawing, design documents etc shall be available with each set. a. Installation manual. b. Equipment layout drawing c. Cabling diagrams d. Overall system Architecture, description of hardware/software e. Schematic drawing of all circuit in the system f. Equipment installation drawings g. Installation instruction and testing procedures h. Acceptance testing Procedure i. Emergency action Procedure 2.4 The successful bidder shall submit the layout drawing of deploy of CCTV equipment’s clearly depicting its integration and logic flow with other devices and systems. The drawing shall be the “as built drawing“ and shall also include the networking arrangements fully operational solution. 2.5 The bidder shall provide two (2) full sets of documents for each element supplied. This documentation shall provide information on all aspect of installing the element. 2.6 The bidder shall submit all requirements documents for the goods/ materials and services as below: (i) Installation, detail of fault diagnostics, operation and maintenance manual 2.7 All documents submitted by the bidder shall be in the form of bounded hard copies along with softcopy in DVD/CDs. 3. Incident Services The bidder shall be required to provide all of the following services: 3.1 The successful bidder shall be required to undertake the supply, design, install customize, integrate. 3.2 After initial maintenance period of three (3) years, MUDA may extend the services of the bidder for providing maintenance services. The maintenance and support contract will be renewed for mutually agreed term based on satisfactory performance of the previous period. 3.3 The condition of uptime commitment and service level parameters governing during the contract period shall prevail for subsequent maintenance and support. 3.4 Development of close Circuit Television and security policy and procedure. 4. System Performance and Availability (i) The IT Infrastructure for production environment should be designed in such a way that the infrastructure shall be made available 99.5% without single point of failure. (ii) The system shall be operational, reliable, and available (24 hours by 7 days per week, 365 days in the year) for essential business processes and mission – critical business operation. (iii) The key information losses should be zero. (iv) The redundancy factor shall be such that the loan on any of the components shall no exceed 70% of the capacity of full operation. (v) The close Circuit Television and injection system shall be able to recover all keys generated and used before the system goes down. (vi) The disaster recovery of close circuit Television shall be designed in a manner that in the event of disaster, the recovery system takes over within 1 to 5 minutes. (vii) System performance standards should meet industry standards based on the technology used. In general the system should support a) 1‐2 seconds response time for data input after pressing the enter (save) key to display a response. b) 1.5 seconds response time for on‐line inquiry.
5. Data Backup and Archival The bidder shall be responsible to put in place a mechanism for efficient data backup and recovery for the scoped item at production and disaster recovery Centers. They shall develop a strategy for backup, archiving and recovery of data and submit to MUDA for review and approval. 5.1 Data Backup and Recovery process (i) Daily data backup of all devices and solution components shall be maintained in order to ensure continuity of business operations. (ii) Detailed recovery processes shall be laid to allow restoration of information from backup. (iii) The bidder shall need to ensure that data is complete i.e. no data is lost or omitted from any collection and/or transmission at all levels of the system. (iv) The backup of recovery will not take more than one hour. The functionalities and performance of system shall not degrade during backup process. (v) The system should have provision to identify and load from data archive if need arises. 6. Training (i) The bidder should provide information on the training course offered with duration of each module and required knowledge for MUDA and its consortium staff to attend such courses. (ii) Bidder should clearly specify with training schedule and infrastructure required for such training. (iii) Bidder must ensure that adequate training shall be provided to MUDA Technical and operational staff to handle first / second level maintenance and operation. 7. Load Testing and Stress Testing (i) The bidder must arrange to demonstrate that the system that the system is able to perform under high load a) CPU Utilization must not cross beyond 70% at any time of processing b) Initialization load as prescribed in this document Load testing test cases should also cover scenarios like NCMC initialization various key generations etc. (ii) Stress testing scenario must be simulated in order to come down in a graceful way. 8. Documentation and Manuals The bidder shall provide three full sets of Installation, Configuration and Operating documentation for each element supplied. This documentation shall be written in English and provide information on all aspect of installing the element. There will be a requirement for provision of both user and technical documentation to support the ongoing operation of the system. This will encompass: (i) System and Database design (ii) System Specification (iii) Detailed functional specification (iv) System Implementation strategy and plan (v) Network an d security strategy and implementation plan (vi) System Integration an d interface document with various modules, functions and devices (vii) System and network texting including load test (viii) User manual for the application association with the solution (ix) Operation Procedure manual: including procedure for fault logging, helpdesk and support and fault resolution. (x) Training manual for all levels of operational staff (xi) disaster contingency Plan and Procedure(s) (xii) Any other relevant document The standards of documentation required should be such that all elements of the solution can be maintained effectively in terms of availability, operation and control by the user without any referral or assistance from the bidder.
9. Security Management The CCTV shall be designed in a way to ensure maximum security of all sub – systems/ components of the system. The CCTV system should be suitably protected from internal as well as external treats. The main features of security Management will include, but not limited to the following: (i) The system will e developed to be protected from the attack of viruses, malware, and intrusion. Etc. (ii) The bidder shall ensure to have suitable security policies, processes and monitoring built‐in the solution and enforced to the fullest extend to prevent unauthorized access, hacking, denial of service attack and/ or other security threats/ vulnerabilities. (iii) All critical information like the customer bank account details and other sensitive financial data (internal as well as external) will be protected to meet applicable banking industry standards/ other applicable laws. 10. Operation, Maintenance and support The Operation service include day to day operation of CCTV solution and provide management report on timely basis for 24x7x365 system availability. The bidder takes complete end‐ to‐ end responsibility to keep the system working and maintained the solution by providing skilled resource and marked Service Level Agreement (SLAs). The bidder should undertake corrective & preventive maintenance to resolve faults, restore service & minimize the downtime and number of faults. Restore system if need arises. The bidder would have to provide assistance and support to operational team and give emergency service if required. The following software maintenance activities should be provided by the successful bidder through the contract Period: (i) Routine and Preventive maintenance service (ii) Fixing of bugs and carrying out test as required (iii) Assisting in interfacing with other application as required (iv) Carrying out modification up‐gradation in the software required due to any change in the hardware/ equipment/ third party software specifications (v) Installation, re‐installation and reconfiguration of CCTV and its associated software required sue to any reasons; and (vi) Change, Incident, Problem and Release Management. During the Period of contract, the bidder shall provide onsite support as per the plan agreed with MUDA. During the period of contract, the bidder shall under take repair, maintenance and replacement of all items related to supply items/ related to supply items/ solutions provided by it during AMC Contract Period. The maintenance will include all Preventive maintenance, unit replacement, on‐call maintenance and schedule replacement services. The bidder shall maintain adequate stock of spare units for replacement, components/ spares, consumable, etc., to minimize downtime. The bidder shall try to anticipate defects based on the alert and take proactive actions to prevent occurrence of actual defects, wherever possible and rectify defects in minimum time. The bidder should also establish and maintain and support plan addressing all aspects of the maintenance program. 11. Systems Requirement Specification ACCTV system is required to be installed in the public transport (Bus) for surveillance of security and safety of passenger travelling in the vehicle. The system should have the following components: (i) In‐Bus Installation a. 2 (two) Cameras in each Bus Mini Bus‐Facing the entry /exit service door and at the middle of gangway Standard Bus‐Facing the entry/exit service door b. A MVDR (Mobile Video Digital Recorder) with minimum data storage for 500 hours and download facility through USB ports. (ii) Backend software to review/ search the recorded data The CCTV solution should have the following minimum features and specification:
TECHNICAL DETAILS OF ITEMS TO BE SUPPLIED 1.
72” LCD TV 9
Sl. REQUIRED SPECIFICATION a. Screen Size: 72″ Inch
OFFERED SPECIFICATION
REMARKS
Resolution: Full HD (1920 x 1080) Pixels Backlight: LED IPS‐Advanced LED LCD Panel: Yes XD Engine: Yes DivX through USB 2.0: Yes (DivX HD) Clear Voice II: Yes Mono/Stereo/Dual (MTS/SAP): Yes / Yes / Yes Audio Output (Watts – THD 10%): 10W + 10W + 5W(Sub Woofer) Speaker System: 2 Way 3 Speakers Dolby Digital Decoder: Yes Simplink (HDMI‐CEC): Yes PC Connectivity: Yes USB 2.0: 3 HDMI In: 4 AV In: 1 RF In: 1 Digital Audio Out (Co‐Axial/Optical): 1 RGB In (D‐Sub 15 Pin): PC‐1 PC Audio Input: 1 Ethernet LAN: 1 Power Supply: 100‐240V / 50‐60Hz Dimensions: 1694 x 386.3 x 114 mm Weight: Approx. 65.5 kg
2.
Server
Sl. REQUIRED SPECIFICATION
OFFERED SPECIFICATION
REMARKS
a.
E5645 1P 6GB / (1) (1) Intel® Xeon® E5645 (2.40GHz/6‐core/12MB/80W) / 12MB (1 x 12MB) L3 cache / 6GB (3 x 2GB) PC3‐10600 (DDR3‐1333) Registered DIMMs / Embedded NC326i PCI Express Dual Port Gigabit Server Adapter / Embedded HP Smart Array P410i/256MB Controller/ 1) 750 Watt Hot‐Plug (Redundancy enabled) power supply / 3 fans ship standard/ Tower (5U) , 8TB HDD
4.
Desktop Computer
Sl. REQUIRED SPECIFICATION
a. Form Factor b. Processors c. Chipset d. Memory e. Optical Drive f.
Storage
g. Drive Bays h. Slots
i.
Ports
j.
Audio
k. Power Supplies l. m .
Graphics Controller Display
n. NIC o. Keyboard p. Pointing Device Operating q. Systems(as per choice)
r.
Micro Tower Intel Core i7-3770 CPU , Quad ,3.4 Ghz, 8 MB Intel Q 75 4GB DDR3 PC3-8500 (1066MHz) Non ECC Memory(4 DIMM Slots )- Max upto 32 GB SATA Super Multi DVD Writer 8X of better Drive 500 GB SATA Harddisk Drive 7200RPM Total of Min. 4 Bays (Including - 2* 3.5"and 2 * 5.25") (1) PCI, (2) PCIe x1, (1) PCIe x16 ( 3.0 ) Front : 4 USB 2.0 , Microphone headphone Rear : 4 USB 3.0 , 2 USB 2.0 , one VGA, one DisplayPort, one RJ-45 Ethernet, one line in, one line out, one serial one parallel port and color coded PS/2 for keyboard and mouse 8-Channel High Definition Audio with Internal Speaker 320W standard efficiency or 90% high efficiency (HE ) power supply & Energy Star 5.0 Certified & GOLD EPEAT Integrated Intel Graphics Media Accelerator 4500 18.5" TFT Maximum Resolution 1366x768 @60Hz, TCO certified (Same make as PC) Integrated Gigabit (10/100/1000 NIC) LAN 104 keys US STD. keyboard (Same make as PC) Optical 2/3 Button Scroll Mouse (Same make as PC) (A) Preinstalled Genuine Windows 7 Professional Edition with media & Certificate of Authenticity (B) Preinstalled RHEL5/6 Workstation with media and
OFFERED SPECIFICATION
REMARKS
s.
Antivirus (Optional)
t.
Add on Memory (Optional)
u. Certifications
subscription Kaspersky/Norton/AVG/McA fee/Bitdefender Antivirus with 1 Yr. Subscription Extra 2GB DDR3 PC3-8500 (1066-MHz) Non ECC Memory Certifications: For OEM : ISO 9001:2000 & For PC : UL/CSA, FCC and Windows certification & Linux (Redhat/ Suse Certification), Energy Star 5.0 Certified
5.
L3 24 port Core Switch (Advance Modular Layer 3 Switch)
Sl. REQUIRED SPECIFICATION a. Performance : Switch Come with 48 copper ports of 10/100/1000 Mbps & 12 Fibre ports of 1Gbps as well 2 Nos. 10G port Upgradation in Future Chassis with minimum of 8 payload slots with redundant dual active active core 350Mpps forwarding rate Extensive wire‐speed traffic classification for ACLs and QoS Supports 10KB Jumbo frame size Wire‐speed multicasting for CCTV traffic 640Gbps or more Switching Fabric Up to 128 or 250K IPv4 routes Up to 16K MAC addresses Up to 2 or 4K layer 2 multicast entries Up to 1K layer 3 IPv4 multicast entries 4K VLANs Chassis shall have IPV4 and IPV6 in hardware b. Reliability : Mean Time Between Failures: 185000 hours or more Dual hot swappable PSUs with 1 + 1 redundancy Hot‐swappable modules Hot swappable fan modules Switches shall support graceful restart for OSPF/BGP/IS‐IS c. IEEE Standards : IGMPv3, Internet Group Management Protocol v2 (IGMPv2), PIM‐SM, OSPFv2
OFFERED SPECIFICATION
REMARKS
IEEE 802.1v VLAN classification by protocol & port IEEE 802.3ac VLAN tagging IEEE 802.1ad VLAN double tagging (Q‐in‐ Q) Configurable Guest and Auth Fail VLANs. RADIUS RADIUS Accounting RADIUS Attributes for Tunnel Protocol Support IEEE 802.1p Priority Tagging DiffServ Precedence for 8 queues/port DiffServ Architecture IEEE 802.1D Spanning Tree Protocol (STP) ‐ MAC Bridges IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.1t ‐ 2001 801D maintenance IEEE 802.1w ‐ 2001 Rapid Spanning Tree Protocol (RSTP) d. Routing : Advanced routing protocol like RIPing, OSPFv3, BGPv4+, VRRPv3 Up to 5K RIP routes Up to 15K OSPF routes Up to 5K BGP routes Up to 5K RIPng routes VLAN support IPv6 routing option Supports 4096 VLANs Virtual Routing and Forwarding (VRF) Lite e. Security 801x support Dynamic and Private VLANs NAC or equivalent BPDU Protection STP Root Guard RADIUS server Port, Web and MAC Based Authentication f. Quality of Service Policy based QoS features Highly configurable traffic classification Mixed scheduling, to support complex traffic queuing requirements 8 QoS queues per port Two‐rate three‐contrasting colors bandwidth metering, with burst sizes of 64 Kbps
Access Control Lists (ACLs) and IEEE 802.1p Priority Tagging g. IPv6 Features:‐ IPv4 and IPv6 Dual Stack IPv6 Management via Ping, TraceRoute, Telnet and SSH Static Unicast Routes for IPv6 RFC 1886 DNS Extensions to support IPv6 RFC 1887 An Architecture for IPv6 Unicast Address Allocation RFC 2461 Neighbour Discovery for IPv6 RFC 2462 IPv6 Stateless Address Autoconfiguration RFC 2464 Transmission of IPv6 Packets over Ethernet Networks RFC 2711 IPv6 Router Alert Option RFC 3056 Connection of IPv6 Domains via IPv4 Clouds RFC 3513 IPv6 Addressing Architecture RFC 4443 Internet Control Message protocol (ICMPv6) h. Management : GUI, Telnet, Industry‐standard CLI with built‐in Help SD/SDHC memory card socket allowing software release files, configurations and other files to be stored for backup and distribution to other devices Support sFlow or Equivalent RMON (4 groups) Out of band 10/100/1000 Ethernet management port and console management port SSH and SNMPv3 for secure management Local RADIUS database and RADIUS Authentication i. Electrical Approvals and Compliances EMC: EN55022 class A, FCC class A, VCCI class A Immunity: EN55024, EN61000‐3‐levels 2 (Harmonics), and 3 (Flicker) j. Safety : Standards: UL60950‐1, Certification: UL, cUL, TUV Restrictions on Hazardous Substances (RoHS) Compliance Power Characteristics AC Voltage: 100 to 240V (+/‐10% auto
ranging) Frequency: 47 to 63Hz with 1+1 PSU k. Power Consumption : 700W or less l. Environmental Specifications : Operating Temperature Range: 0°C to 40°C Contractors must provide an OEM authorization confirming the compliance to above technical specifications, along with the OEM authorization letter.
6.
Distribution Switch
Sl. REQUIRED SPECIFICATION a. Port Density and Redundancy The switch shall have at least 24 ports of 10/100/1000 Base‐T which share the same switch fabric and 4 ports of SFP Slots (Small Form‐factor Pluggable, Combo port) Loaded with 1000 Base LX The switch shall have at least 4 ports of 10G SFP+ slots Redundant Power Supply available to load share with internal power supply, providing uninterrupted power and extra reliability b. Performance The switch shall support at least 136 Gbps Switching capacity The switch shall support at least 100 Mpps forwarding rate (as 64Byte per packet) Support 48Gbps of stacking bandwidth Supports 9KB jumbo frames Support Wire speed multicasting Support Up to 32K MAC addresses Support 8K Layer 3 entries The switch shall be able to configure IP address to 2000 VLAN. Full environmental monitoring of PSUs, fans, temperature and internal voltages. SNMP traps alert network managers in case of any failure c. VLAN Support Generic VLAN Registration Protocol (GVRP)
OFFERED SPECIFICATION REMARKS
IEEE 802.1ad Provider bridges (VLAN stacking, Q‐in‐Q) IEEE 802.1Q‐2005 Virtual LAN (VLAN) bridges IEEE 802.1v VLAN classification by protocol and port IEEE 802.3ac VLAN tagging The switch shall support port‐based VLAN, IEEE 802.1q tag‐based VLAN, IP subnet‐ based VLAN, protocol‐based VLAN, and Private VLAN LLDP‐MED ANSI/TIA‐1057 and Voice VLAN d. Routing Protocol Support Black hole routing Directed broadcast forwarding DNS relay Equal Cost Multi‐Path (ECMP) routing Policy‐based routing Route maps Route redistribution (OSPF, BGP, RIP) UDP broadcast helper (IP helper) Up to eight Virtual Routing and Forwarding (VRF Lite) domains (with license) e. Security Access control list, SSH, RADIUS, SSLv3, MAC‐based authentication Dynamic VLAN assignment, NAC, BPDU Protection, Guest VLAN support, Web‐ based Authentication Transport Layer Security (TLS) Extensions, PPP Extensible Authentication Protocol and IEEE 802.1x Multi Supplicant authentication DHCP snooping, IP source guard and dynamic ARP inspection DoS attack blocking and virus throttling IEEE 802.1x Authentication protocols (TLS, TTLS, PEAP & MD5), SSH Remote Login IEEE 802.1x, MAC‐based and Web‐ based—can be enabled simultaneously on the same port. The switch shall support inbuilt scalable RADIUS server. The supplicants can be access to especial server (ex. Active Directory) and be authenticated properly before the switch authenticates the port which the supplicants connected.
The switch shall support be able to move the users who are failed authentication to arbitrary VLAN f. Multicast Support The switch shall support IGMPv2, IGMPv3, IGMPv2 snooping, and IGMPv3 snooping. The switch shall support PIM‐SM and PIM‐ DM, MLD Snooping (v1 and v2) g. Quality of Service Limit bandwidth per port or per traffic class down to 64kbps Wire speed traffic classification with low latency essential for VoIP and real‐time streaming media applications Policy‐based QoS based on VLAN, port, MAC and general packet classifiers Policy‐based storm protection Extensive remarking capabilities Strict priority scheduling, weighted round robin or mixed RED and WRED curves for drop precedence RFC 2474 DiffServ Precedence for 8 queues/port, RFC 2475 DiffServ Architecture, RFC 2597 DiffServ Assured Forwarding (AF) and RFC 3246 DiffServ Expedited Forwarding (EF) h. Resiliency features Stacking ports can be configured as 10G Ethernet ports Control plane prioritization ensures the CPU always has sufficient bandwidth to process network control traffic Link Aggregation (802.3ad LACP), Dynamic Link Failover, STP Root Guard The switch shall be able to detection and block the port automatically, in case of it receive loop detection packets which itself send at other port. The switch is configured received rate‐ limit of broadcast, multicast and unknown‐unicast packets. In case of it received over setting value, discard excess packets to prevent packet storm IEEE 802.1D Spanning Tree Protocol (STP) ‐ MAC Bridges, IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
i. j.
IEEE 802.1t ‐ 2001 802.1D maintenance and IEEE 802.1w ‐ 2001 Rapid Spanning Tree Protocol (RSTP) Should Support Long‐distance stacking as well Virtual Router Redundancy Protocol (VRRP) Support PVST+ compatibility‐mode Stackable up to eight units in a VCStack IPv6 Features 6to4 tunnelling DHCPv6 relay, DNSv6, NTPv6 IPv4 and IPv6 dual stack IPv6 management via Ping, TraceRoute, Telnet and SSH Neighbor discovery for IPv6 Management SNMPV3, Web based GUI, Telnet, RMON (4 groups) and command Line Interface. Out of band 10/100/1000 Ethernet management port , Console management port SD/SDHC memory card socket allowing software release files, configurations and other files to be stored for backup and distribution to other devices Event‐based triggers allow user‐defined scripts to be run upon selected system events The switch shall support IEEE 802.1ab Link Layer Discovery Protocol (LLDP) SSH and SNMPv3 for secure management, Support RFC 2741 Agent Extensibility (AgentX) Protocol The switch shall support MIB‐II and RMON MIB (groups 1, 2, 3, and 9) and Port Mirroring RFC 2575 View‐based Access Control Model (VACM) for SNMP RFC 2574 User‐based Security Model (USM) for SNMPv3, RFC 1212 Concise MIB definitions RFC 1212 Concise MIB definitions, RFC 3164 Syslog Protocol, Diagnostic Tools ,BIST (Built‐In Self Test) The switch shall support sFlow: A method for monitoring traffic in switched and routed networks
The switch shall support an editor function to edit a configuration directly. k. Electrical Approvals and Compliances EMC: EN55022 class A, FCC class A, VCCI class A Certification: UL, cUL, TUV Safety :UL60950‐1, CAN/CSA‐C22.2 No. 60950‐1‐03,EN60950‐1, EN60825‐1, AS/NZS 60950.1 RoHS Compliant l. Power Consumption 89 Watts or less m. Environmental Specifications Operating Temperature Range: 0°C to 40°C Storage Temperature Range: ‐30°C to 70°C SM FO Module Operation Temperature ‐ 5°C to 70°C
7.
L2 24 port Gigabit Managed Switches
Sl. REQUIRED SPECIFICATION a. Port Density 24 10/100/1000 Mbps with minimum two SFP combo ports and one console port. 2 nos. dedicated 1G ethernet Stack port and Stack between switch within 100 Mtrs. Wire speed non blocking architecture b. Performance Switch fabric 80+ Gbps with upwards of 50Mpps of throughput for cctv video traffic 64MB RAM Up to 2048 VLAN ID 8,000 MAC address c. Interface support 10/100‐TX RJ‐45 10/100/1000TX RJ‐45 100‐FX, 1000‐SX, 1000‐LX SFP slot RS232 RJ‐45 connector d. Management Industry Standard CLI Web Interface Secure encrypted WEB and CLI management with SSH v2 and SSL
OFFERED SPECIFICATION
REMARKS
e.
SNMP v3 General Features Single IP address Stack management Across Stack Link Aggregation, VLAN configuration, Port Mirroring, Trunking across stack 20 Gig Rissilance link between Stack f. Quality of Services 4 or more Priorities assigned to 4 queues 802.1p for Layer 2 QoS DSCP (Diffserv) for Layer 3 QoS 802.1p to DSCP remarking traffic Traffic prioritization using 802.1p, ToS, DSCP fields Strict Scheduling and Weighted Round Robin g. Security Guest/Private VLAN SSHv2 for Telnet management SSLv3 for WEB management RFC 1492 TACACS+ RADIUS Authentication IEEE 802.1x Port‐based network access control Broadcast Storm Control MAC & IP based ACLs h. General Standards 802.1d Bridging 802.3x BackPressure/ Flow Control i. Redundancy Standards 802.1D Spanning Tree Protocol 802.1W Rapid Spanning Tree 802.1s Multiple Spanning Tree 802.3ad LACP Link Aggregation Static port trunk IGMP snooping v3 j. VLANs IEEE 802.1Q VLAN Tagging Up to 256 VLANs Port‐based VLANs MAC‐based VLANs Private VLANs GARP VLAN Registration Protocol (GVRP) k. Power Characteristics Voltage input 100‐ 240VAC l. Electrical/ Mechanical Approvals Safety UL 1950 (UL/cUL), EN60950 (TUV) EMI FCC Class A, EN55022 Class A,
VCCI Class A, C‐Tick, EN61000‐3‐2, EN61000‐3‐3 Immunity EN55024 RoHS compliant Contractors must provide an OEM authorization confirming the compliance to above technical specifications, along with the OEM authorization letter.
8.
GSM Modem
Sl. REQUIRED SPECIFICATION OFFERED SPECIFICATION a. Certification CE/FCC Interface Type USB Style External Type Wireless Download 7.2 Mbps Upload 2Mbps MicroSD card slot up to 8GB Color White/Black 3G Frequency HSDPA/UMTS Band 850/1900/2100MHz 2G Frequency GSM/GPRS/EDGE Band 850/900/1800/1900MHz Weight About 30g Dimension 69*26.5*12mm Temp. storage ‐20C ‐ +60C Operation Temp ‐10C ‐ +55C Windows 2000/XP/Vista, Compatible Mac, and OS
REMARKS
9.
Storage Box
Sl. REQUIRED SPECIFICATION
OFFERED SPECIFICATION support
a. The storage array should industry‐leading Operating System platforms & clustering including: Windows Server 2003, Windows Server 2008, Sun Solaris, HP‐UX, IBM‐AIX, Linux, Vmware& Citrix Xen Server. b. Offered Array shall be scalable to at‐least minimum of 100 or higher numbers of Drives 80TB or higher capacity using 300GB/450GB/600GB, 15K drives. c. Every offered storage node / Controller shall be supplied with minimum of 4 X 6 SAS Ports and 2 x 1Gbps/8 x 1 Gbps ISCSI ports and shall be upgradable to 10Gbps,
REMARKS
d. e.
f.
g. h.
i. j.
k. l.
m. n. o.
p.
if required. Offered Controllers shall be active‐active . Offered Storage Array shall be supplied with minimum of 3.6TB raw capacity using 300GB 15K capacity drive Storage system shall have support of both SAS and SATA drives like 300GB SAS and 1TB SATA drives. Every storage node / Controller shall be provided with minimum of 4GB memory. Offered Storage array shall be configured in such a way that future capacity growth shall not warrant any additional software license on the storage array. Array must support Automatic Load Balancing. Offered storage array shall be configured in a no single point of failure so that failure of storage node / Controller shall not impact the operations. Every offered storage controller shall support RAID 10, 5 and 6 levels. Storage shall be offered with both Snapshot and clone license for the complete capacity supported by the array and shall not warrant any additional license for Snapshot and clone in future due to capacity growth.. Clone space shall be equivalent to the actual data in the Source volume. Storage shall support more than 32 snapshots for a given volume. Storage shall support both Synchronous and Asynchronous based replication and shall be supplied with required licenses for complete supported capacity of the array. Storage array shall be supplied with performance management software.
OFFERED SPECIFICATION
REMARKS
10.
Air Conditioner
Sl. REQUIRED SPECIFICATION a.
Star Rating
5
Capacity (Tonnage)
1.5
Capacity (W)
5,300
Air Circulation (Max, ㎥/min)
16.0
Energy Efficiency
EER (Cooling, W/W)
Moisture removal (l/hr)
2.0
Noise level
Indoor High/Low
.38
1
11.
Network Printer
Sl. REQUIRED SPECIFICATION a. Functions
Print. copy, scan, digital send, black/white fax (optional) Multitasking supported Yes
Printing specifications Print speed black: ISO Laser comparable:Up to 50 ppm Normal:Up to 50 ppm (All printed pages originate from the default tray of a HP LaserJet 9040/9050mfp with a High‐ Capacity Input (HCI) Tray 4. ) First page out (ready) Black:Less than 9.5 sec Duty cycle (monthly, A4) Up to 300,000 pages Recommended monthly page volume 15000 to 50000 Print technology Monochrome Laser Print quality black (best) Resolution 1200 (1200 dpi quality), 600 x 600 dpi Print languages
OFFERED SPECIFICATION
REMARKS
postscript level 3 emulation
direct PDF printing (v 1.3) with at least 128 MB memory enabled
XHTML‐Print v 0.95
PML (Printer Management Language); 80 internal scalable TrueType fonts; additional font solutions available Display
Graphical touchscreen display Processor speed 533 MHz
Connectivity Connectivity, standard
Hi‐Speed USB 2.0, Gigabit Ethernet Embedded Print Server, 1 open EIO slot, connection for paper handling device, host USB port (compatible with USB 2.0 specifications) for additional functionality, 1 Foreign Interface Harness (FIH) Network ready Standard Connectivity, optional
EIO internal print servers, external print servers, Fast Infrared connect (FIR): Connectivity: en1700 USB 2.0 Print Server J7988G, en3700 USB 2.0 Print Server J7942G, ew2400 Wireless USB 2.0 Print Server J7951G, 510x Parallel Print Server J7983G, 300x Parallel Print Server J3263G, EIO 1284 adapter J7972G, 620n EIO print server J7934G, 635n EIO Print Server J7961G, 630n EIO Print Server J7997G 690n Wireless print server J8007G Minimumsystemrequirements Microsoft® Windows® 2000: 300 MHz processor, 64 MB RAM;
Microsoft® Windows® XP Home and XP Professional: 233 MHz processor, 64 MB RAM; 180 MB of free hard disk space for Windows®, CD‐ROM drive or Internet connection; Mac OS X v10.2.8, v10.3, v10.4 or higher with 128 MB RAM, CD‐ ROM, 160 MB of free hard disk space. For Mac OS v10.4 and higher, PowerPC and Intel® Core Processor Macs are supported Compatible operating systems
Microsoft® Windows® 2000
XP Home, XP Professional
Windows Vista® Ready
OS/2 v3.0 or higher
Mac OS X v10.2.8, v10.3, v10.4 or higher
Linux
AutoCAD
Memory specifications Memory, standard 384 MB Memory, maximum 512 MB Hard disk
Standard, 80 GB
Paper handling Paper handling input, standard 100‐sheet multipurpose tray, two 500‐sheet input trays, 2000‐sheet input tray, 100‐sheet automatic document feeder, automatic two‐ sided printing Paper handling output, standard Choose one finishing output solution: 3000‐sheet stacker, 3000‐ sheet stapler/stacker, multifunction finisher, 2000‐sheet 8‐bin mailbox Duplex printing
Automatic (standard) Media sizes supported
A3, A4, A5, B4 (JIS), B5 (JIS), B6 (JIS), C5, DL Media types Paper (bond, colour, letterhead, plain, preprinted, prepunched, recycled, rough), labels, cardstock, transparencies Media weights, supported Multipurpose tray 1: 64 to 216 g/m²; Tray 2, 3 and 4: 64 to 199 g/m²
Scanner specifications Scanner type Flatbed, ADF Scan file format PDF, JPEG, TIFF, MTIFF Scan resolution, optical Up to 600 dpi Scan size (flatbed), maximum 27,9 x 43,2 cm Automatic document feeder capacity Standard, 100 sheets Digital sending standard features
Scan to e‐mail
Desktop folder
Network folder. LDAP addressing. User Authentication: PIN
LDAP/Active Directory with Kerberos File formats, supported
PDF
JPEG
TIFF
MTIFF
Copier specifications Copy speed (normal) Black:Up to 50 cpm Copy resolution (black text) Up to 600 x 600 dpi Copy reduce / enlarge settings 25 to 400% Copies, maximum Up to 999
Fax specifications Faxing Optional Fax transmission speed 33.6 Kbps (with optional analog fax accessory) Fax note Optional, enabled with purchase of optional analog fax accessory Fax memory Dependent upon available disk space Fax resolution Up to 300 x 300 dpi Speed dials, maximum number Up to 100 Broadcast locations 100 Power and operating requirements Power Input voltage 110 to 127 VAC (+/‐ 10%), 50/60 Hz (+/‐ 2 Hz); 220 to 240 VAC (+/‐ 10%), 50/60 Hz (+/‐ 2 Hz) Power consumption 1022 watts (active/printing), 1030 watts (copy), 331 watts (ready), 244 watts (sleep), 2 watts (off); Typical Electricity Consumption (TEC): 18.9 kWh/Week (Power reported is highest values measured for printing and copying using all standard voltages.) Operating temperature range 15 to 32.5° C Operating humidity range 30 to 70% RH Dimensions and weight Minimum dimensions (W x D x H) With 8‐bin mailbox: 1092 x 838 x 1219 mm, with stacker: 1168 x 787 by 1194 mm, with stapler/stacker: 1168 x 787 x 1194 mm, with multifunction finisher: 1295 x 787 x 1194 mm
Weight 143 kg (without finishing output solution) Package weight 181.4 kg (without finishing output solution)
12. Sl. a.
10 KVA UPS REQUIRED SPECIFICATION
UPS Type
Double Conversion True On‐Line b. CAPACITY ‐ KVA 10 KVA c. Phase Three d. Voltage 305 – 475 V e. Power Factor 0.9 f. Frequency 45 Hz – 55 Hz g. Phase Single h. Voltage / Regulation 230 V +/‐ 1% i. Nominal Frequency 50 Hz +/‐ 0.05 Hz j. Power Factor 0.8 p.f. k. Over Load 125% for 10 Minutes & 150% for 1 Minute l. Static Voltage Regulation +/‐ 6% for 50% step load change m. Dynamic Voltage +/‐ 1% Nominal for all Regulation variations of Line Load +/‐ 10% for 10% to 100% step load change n. Wave From Sinusodial o. Total Harmonic <3% Distortion p. Inverter Efficiency 85% to 93% on full load q. Charger Input circuit breaker, Charger over voltage, Charger over current limit. r. Battery Battery low cut off / Current limit, HRC fuse in battery path, Battery over charger trip s. Inverter Out over voltage / Over load trip, Current limit, Short circuit
OFFERED SPECIFICATION
REMARKS
t.
Main ON, UPS ON, UPS trip, UPS OV/UV, Battery low trip u. Display LCD Display for Checking Input and Output Parameters v. Operating Temperature 0o to 55oC Range w. Relative Humidity 95% non condensing x. Max. Operating altitude 3000 meters without derating y. Acoustic Noise <55db z. Back‐up Time Min. 2 Hours on Full Load
Indications
13.
Antivirus Software
Sl. REQUIRED SPECIFICATION
OFFERED SPECIFICATION detection,
a. Real time virus cleaning/quarantine. b. Heuristic scanning to allow rule‐based detection of unknown viruses facility of Quarantine Manager c. Scanning of compressed file archives in ZIP, ARJ and Microsoft Compressed formats. d. Protection from viruses hiding in compressed files, such as Internet downloads and email attachments e. Protection against spyware f. Proactive protection against zero‐day threats. g. Central management console to centrally control desktop configurations, including scanning and cleaning options. h. Centralized Audit trail logging and reporting capability with ability to communicate the reports using email. i. Role based administration of the solution. j. Real‐time lock down of client configuration – allow or prevent users from changing setting or unloading/uninstalling the software. k. Pattern file roll‐back – shall be able to return to past pattern file if there is any problem with the new pattern file. l. Automatic downloads of latest virus signature updates from the Internet to desktops and servers, across different
REMARKS
m. n.
o.
p. q. r.
s. t.
platform running Windows. The distribution should happen seamlessly from a single management console Integration with Windows Active Directory. Remote deployment of Client software installation/Windows 2003/ 2008 remote installation. Support for Windows XP Professional, Windows Vista, Windows 7, Windows 2003 Server, Windows 2008 Server Ability to force an update (PUSH) to client Application and Device control. Support for additional features like Desktop Firewall, Intrusion Prevention System etc. Multiple AV server management and AV client syn. Client av should be transfer or manage another AV server without down time of the system.
14.
Firewall
Sl. REQUIRED SPECIFICATION a. The Firewall must be appliance based and should facilitate multi‐application environment. It should be modular based to accommodate future growth/ expansion The Firewall should be ICSA Labs certified for ICSA 4.0 and EAL 4 certified, if not the same model The platform should be based on realtime, secure embedded operating system The platform should use ASIC based architecture that is optimized for packet and application level content processing The proposed system shall support unlimited IP/User license for Firewall / VPN (IPSec& SSL)/ IPS/WCF/AV Should provide a Http, Https, SSH, Telnet, SNMP based management console for managing and configuring various components of the appliance The device should belong to a family of products that attains NSS Approved (UTM) Certification The device should belong to a family of products that attains IPv6 Ready Phase 2 & IPv6 Certification
OFFERED SPECIFICATION
REMARKS
The Firewall Appliance should be rack mountable and shall not exceeding 2U The Firewall should have facility to provide Two Factor Authentication solution with additional token based solution The Firewall should have facility to provide Wireless Controller to support wireless access points for wi‐fi environment b. Networking & System Performance Requirements: The Firewall should support a minimum of 10 ‐ 10/100/1000 interfaces with auto sensing capacity The platform should support the standards based Link aggregation technology (IEEE 802.3ad) to achieve higher bandwidth. The Firewall should support IEEE 802.1q VLAN Tagging with about 1024 VLANs supported (in NAT/Route mode) Should support automatic ISP failover as well as ISP load sharing for outbound traffic The Firewall should support Dynamic Routing Protocol for RIP1 & 2, OSPF, OSPFv3, BGP4, ISIS, RIPng The Firewall should support Static, Policy Based, and Multicast routing The Firewall should support throughputs of 7.0 Gbps or better. The firewall should support throughput of atleast4 Gbpsof AES ‐ IPSEC VPN. should support concurrent session atleast20,00,000 Should support new session per second atleast 45,000 Should support and IPS throughput of 1.2 GBPS or better Should support and GAV throughput of upto500 Mbps Should support Site to Site VPN Tunnels up to 5000 Should support firewall Policies up to 35,000 c. Operating System & Management Requirements: Be proprietary to prevent inheriting common OS vulnerabilities Resided on flash disk for reliability over hard disk Allow multiple OS firmware image for booting options Upgradeable via Web UI or TFTP Be easily backup or restored via GUI and CLI to/from local PC, remote centralized management or USB disk
The system shall support profile base login account administration, offering gradual access control such as only to Policy Configuration & Log Data Access The proposed system shall be able to limit remote management access from certain trusted network or host with corresponding administrator account The proposed system should be able to facilitate administration audits by logging detailed activities to event log for management & configuration updates The administrator authentication shall be facilitated by local database, PKI & remote services such as Radius, LDAP and TACAS+ with option of 2 Factor Authentication The Firewall must be capable of clustering multiple firewalls together into a redundant and highly available stateful configuration without any extra license cost for creating HA. d. Firewall Requirements: The Firewall should support deployment modes as; “Stealth Mode” or “Route Mode" or "Transparent Mode” or "Proxy Mode". The proposed system should have integrated Traffic Shaping / QoS functionality The firewall shall be able to handle VoIP traffic securely with “pinhole opening” and support SIP, SCCP, MGCP and H.323 ALGs Should support DHCP server & DHCP Agent functionality The Firewall should support Stateful inspection with optional Policy based NAT (Static OR Dynamic) The Firewall should support Inbound Port Forwarding with optional inbound Load Balancing Should support IPv6 ACL to implement security Policy for IPv6 traffic All internet based applications should be supported for filtering like Telnet, FTP,SMTP, HTTP, DNS, ICMP, DHCP, RPC,SNMP, BGP, IMAP, NFS etc Should be able to inspect HTTP and FTP traffic when these are deployed using non standard port( i.e when HTTP is not using standard port TCP/80) e. High Availability Requirements: The firewall must support Active‐Active as well as Active‐Passive redundancy. The Firewall must support stateful clustering of multiple active firewalls, and the firewalls must load balance the traffic between them to
share the load. The cluster should support simple and minimal downtime during upgrade f. IPSEC VPN Requirements: The IPSEC VPN and SSL VPN capability shall minimally attain Internet Computer Security Association (ICSA) Certification or equivalent. The proposed system shall comply/support industry standards, L2TP, PPTP, IPSEC, and SSL VPN without additional external solution, hardware or modules: The device shall utilize inbuilt hardware VPN acceleration supported for: IPSEC (DES, 3DES, AES) encryption/decryption SSL encryption/decryption The system shall support the following IPSEC VPN capabilities: Multi‐zone VPN supports. IPSec, ESP security. Supports Aggressive and Dynamic mode Hardware accelerated encryption using IPSEC, DES, 3DES, AES Support perfect forward secrecy group 1 and group 2 configuration MD5 or SHA1 authentication and data integrity. Automatic IKE (Internet Key Exchange) and Manual key exchange. Supports NAT traversal Supports Extended Authentication Supports Hub and Spoke architecture Supports Redundant gateway architecture DDNS support The system shall support IPSEC site‐to‐site VPN and remote user VPN in transparent mode. g. SSL VPN Requirements: The Firewall should be integrated solution and there should be no user based licensing for SSL VPN. The Firewall should support for TWO modes of SSL VPN: Web‐only mode: for thin remote clients equipped with a web browser only and support web application such as:HTTP/HTTPS PROXY, FTP, SMB/CIFS, SSH, VNC, RDP Tunnel mode, for remote computers that run a variety of client and server applications The system shall be capable of enforcing host checking prior to SSL tunnel mode connections: The system shall provide SSL VPN tunnel
mode that supports 32 and 64‐bit Windows operating systems The proposed solution shall allow administrators to create multiple bookmarks to add to a group and make these bookmarks available for SSL‐VPN users. h. Network Intrusion Detection & Prevention System Requirements: The IPS capability shall minimally attain Internet Computer Security Association (ICSA) NIPS/NSS Certification Should have a built‐in Signature and Anomaly based IPS engine on the same unit Able to prevent denial of service and Distributed Denial of Service attacks. Signature based detection using real time updated database Anomaly based detection that is based on thresholds Administrator shall be able to configure DoS policies that are used to associate DoS settings with traffic that reaches an interface based on defined services, source and destinations IP/Range. The device shall allow administrators to create Custom IPS signatures IPS Signatures can be updated in three different ways: manually, via pull technology or push technology. Administrator can schedule to check for new updates or if the device has a public IP address, updates can be pushed to the device each time an update is available. Configurable IPS filters to selectively implement signatures based on severity, target (client/server), protocol, OS and Application types. Supports automatic security updates directly over the internet. (ie no dependency of any intermediate device) Security check updates do not require reboot of the unit. Supports attack recognition inside IPv6 encapsulated packets. Supports user‐defined signatures with Regular Expressions. Supports several prevention techniques including drop‐packet, tcp‐rst (Client, Server & both) etc. List all prevention options i. Antivirus System Requirements: The Antivirus capability shall minimally attain Internet Computer Security Association (ICSA) AV Certification or equivalent
j.
The proposed system should be able to block, allow or monitor only using AV signatures and file blocking based on per firewall policy The System should be able to scan following Protocols: HTTP and HTTPS SMTP and SMTPS POP3 and POP3S IMAP Instant Messenger (AIM, YAHOO!, MSN, ICQ, SIMPLE) NNTP The proposed system shall provide ability to allow, block and intercept (allow but quarantine) attachments or downloads according to file extensions and/or file types AV Signatures can be updated in three different ways: manually, via pull technology or push technology. Administrator can schedule to check for new updates or if the device has a public IP address, updates can be pushed to the device each time an update is available. The AV solution shall be able to quarantine blocked and infected files to either local hard disk or externally. The proposed system should be able to block or allow oversize file based on configurable thresholds for each protocol types and per firewall policy. The solution should be capable scanning Encrypted VPN tunnel traffic originating from the unit for virus Web & Application Content Filtering System Requirements: The proposed system should have integrated Web Content Filtering solution without external solution, devices or hardware modules. URL database should have atleast 40 million + sites and 75 + categories. The proposed solution should be able to enable or disable Web Filtering per firewall policy or based on firewall authenticated user groups for both HTTP and HTTPS traffic. Should blocks web plug‐ins such as ActiveX, Java Applet, and Cookies. Shall include Web URL block Shall include score based web keyword block Shall include Web Exempt List The proposed solution should be able to replace the web page when the web page matches the Web Filtering blocking criteria.
Should have the intelligence to identify &
k. Data Leak Prevention Requirements: Should have the ability to prevent data loss
The proposed solution shall be able to identify, retrieve and rate the actual URL of the cache content commonly available in search engines such as Yahoo and Google. The proposed solution shall be able to identify, retrieve and rate the image files from image search engines. If belongs to a blocked category, image will be replaced by a blank. The proposed solution shall be able to identify, retrieve and rate the multimedia files from multimedia, video & Audio search engines. If belongs to a blocked category, content will be replaced by a blank. For example, a YouTube component will be blanked while retaining the rest of the content in a webpage. The solution shall allow administrators to create multiple new local URL filtering categories besides dynamic categories The solution shall allow administrators to override Online URL Database ratings with local settings Many web sites use HTTP redirects legitimately; however, in some cases, redirects may be designed specifically to circumvent web filtering, as the initial web page could have a different rating than the destination web page of the redirect. The solution shall be able to rate redirected sites. The solution shall be capable of rating URLs by domain and IP address which sends both the URL and the IP address of the requested site for checking, providing additional security against attempts to bypass the rating system.
Should have application control feature
control of popular IM & P2P applications like KaZaa,BitTorrent etc. Should have minimum database of 1500 types of application awareness
through SMTP, FTP, HTTP, HTTPS & IM Should have built in pattern database
15.
Furniture and Fixture
Sl. REQUIRED SPECIFICATION
a.
OFFERED SPECIFICATION 2.5 Ft X 4 FT Tables with Cabinets and
REMARKS
b. c. d. e.
f.
16.
keyboard Tray (Made of Board, sandmica) 5 nos. Should be customised based on site conditions. Chairs revolving 10 nos with high back, leather finish. 6u wall mount Rack to store the switches./ network accessories. Steel Cupboards 4 nos required to store records made of high quality CRCA steel. Other works as directed by the department based on requirement within the Control Room. Laying of all cables and accessories to connect all systems. (Cabling will include all Network and Electrical Cabling)
Command and Control Software
Sl. REQUIRED SPECIFICATION OFFERED SPECIFICATION a. The Central Control Station is the nerve centre of the ITS system. Polling and receiving data from and to the vehicles in the field from the Automatic Vehicle Location Information sub‐system are its main functions. Central control station shall be housed in a premises identified by the purchaser (MUDA). The geographical information system (GIS) application shall enable display of the position of vehicles on a detailed digitized road map of Shillong and linked with the communication control and reporting applications. The central control station applications that will be web enabled shall provide for appropriate user access and security controls. The GIS system shall provide for color coded on arrival times of buses at various bus stations Automatic Vehicle Location / Tracking Location of different buses in its fleet at Shillong. The tracking and locating the buses will cover those buses in movement. Ability to locate a bus at given time in its track to estimate its arrival/departures time at the next destination, based on traffic density, distance, speed, bus occupancy, run‐time information from the previous bus arrival time for the same location etc. Facility to track defined vs. actual movement of vehicles. Facility to view vehicle movements real‐time
REMARKS
on digital on digital maps. Facility to generate information such as travel time destination, average time at bus stop, number of passengers boarding at each point, density of passenger traffic at different bus stops enroute, passengers traffic at different location, alerts on exceptions, and logging of the journey details of the bus for each trip. Support tracking of buses that deviate from the scheduled route based on definition of permitted geographic regions of operation. Facility for playing back the recorded details of the bus movement along the authorized Route. Vehicle Fleet Summary Dashboard – Quick view on fleet performance. The system will be customised with the above options and also with certain other MIS reports required by the Management.
17.
Digital Video Recorder(DVR)
Sl. REQUIRED SPECIFICATION OFFERED SPECIFICATION a. Multiple levels of video quality, CIF (352x288) to full (704x576) selectable for each channel of videos Total resource: 4 channel full D1 Anti‐vibration, anti‐shock mounted case and hard drive carrier for maximum reliability Real time (25/30 frames per second) on every channel Lockable, removable hard disk drive Short leading distance for HDD (hard disk drive) case installation Software option for easy search and review of incidents(when required) The recording should be carried out with time, date and this should be visible while reviewing the recording. Software For Easy review, backup of video recorded on DVR hard drive Password Protection Self‐contained aluminum die‐case enclosed to protect from dust and moisture, IP56 Wide Operating temperature range Ultra low power consumption when in standby mode Should allow to take the backup data at the end of the day Software option for live view and tracking the vehicle location Support wireless video data downloading, WIFI IEEE802.11n File system on the HDD shall be Protected from Unauthorized access or modification Backup battery support at least 10 minutes normal recording when bus power was cut off
REMARKS
Support GPS
Network System
Video
Audio
Built-in Modules Optional
Built-in GPS、WCDMA、WIFI Module, G-sensor Language English Operating Linux/Android system Video input 4 CH Video output 1 CH RCA Signal NTSC/ PAL system Audio input 4 CH Audio ADPCM compression Video D1/HD1/CIF resolution 2.5 inch 1TB hard disk LocalOne SD card, max storage 32GB Alarm input 6 CH Alarm output
2 CH
GPS 3G WIFI
GPS module WCDMA / EVDO 802.11b/g/n 1 RJ45 Ethernet
Network interface Serial interface Speed interface USB2.0 Power input Power & Power output Consumption Consumption Extended Interface
G-sensor General
Dimension Weight Operating temperature
interface 1 RS232 & 2 RS485 1 Speed sensor 1 DC8V ~ 36V 4 channel DC12V 2A 12W-30W Built-in G-sensor module 220mmx166mmx70mm 2.5kg -25℃ ~ +85℃
18.
Dome Camera
Sl. REQUIRED SPECIFICATION
OFFERED SPECIFICATION
REMARKS
a.
Image Sensor
CMOS, PC1089
System
PAL/NTSC
Horizontal 600TVL Resolution Minimum Color:0.1Lux /F1.2 Illumination Effective PAL:512(H)×582(V) Pixels NTSC:510(H)×492(V) S/N Ratio More than 48dB Gamma AGC White Balance
0.45 Auto Auto
Day &NightIR Cut AUTO Switch Electronic Shutter Video Output BLC Sensing Area Sync System IR Distance Lens Power Supply Operation Temp. Dimension Weight
1/50(60)~1/100,000 sec 1.0Vp-p/75Ω on/off 4.9mm*3.7mm Internal 10-15m, 24pcs Ф5 IR LED 3.6 / 6 mm Lens DC12V -10℃～50℃ 94mm(Φ)×80mm 390g
19.
Reverse Gear Camera
Sl. REQUIRED SPECIFICATION Aluminium Shell Waterproof IR Color CCD Camera Image Type: 1/3 Color SHARP CCD Horizontal Resolution: 420 TV Lines Effective Pixel: NTSC: 510(H)X492(V); PAL:500(H)X582(V) Useable Illumination: 0Lux (Built in 18pcs IR LED’s for picture Support in the dark Free viewing angle: 1300 Waterproof: IP66 Shockproof: 10G Video Output: 1.0Vp‐p75Ω Automatic Heating Below + 100C
OFFERED SPECIFICATION
REMARKS
Power Supply: DC12V from Reversing Monitor Dimensions: 69 (W) x 43(H) x 38(D) mm (without mounting)
20.
Announcement System with Internal Display
Sl. REQUIRED SPECIFICATION OFFERED SPECIFICATION a. The announcement System comprises of Amplifiers and speakers units. These are mounted inside the bus for next bus stop & destination announcements meant for passengers inside and outside the bus. There are two independent audio inputs. The audio signal for these is delivered by the Controller unit by text to voice conversion. The Controller unit drives the integrate voice announcement System – both inside & outside the bus. The controller unit has two independent audio output ports. The audio output signals from these ports are given to the amplifiers for driving the speakers. The controller unit also maintains a database of announcement messages. It outputs suitable announcement message to the respective speakers at requisite time for making the announcement. The Audio output is transmitted to various speakers mounted inside and outside the bus on two independent channels – one for speakers mounted on external display boards and other mounted inside the bus. Specification of Speakers: 2 Nos 4 watts for internal Display unit which will be controlled by the Driver Control Unit to display information based on announced information. The display shall automatically display the bus stop name and produce audio announcement when the bus reaches a particular stop based on the signal derived from DCU.
REMARKS
21.
Driver Information System (DIS/DCU
Sl. REQUIRED SPECIFICATION a. Features of the Driver Console Unit (DCU) User friendly user interface with 7” TFT touch screen Password based user authentication for driver Secure data communication with central
OFFERED SPECIFICATION
REMARKS
server over GPRS and Wi‐Fi Interface with Can bus and camera Support LED displays on 485 Port or Ethernet Automatic stage change facility based on GPS with line‐out facility for voice announcement Synchronize ETM over serial communication Advertisement module to generate revenue Alert module to display various public alerts/ warnings Read video content from DVR and display it on Screen for drivers reference. b. Compatibility with ticketing machine: Receive and transmit transaction to back officeControl Passenger information systems (LED signs and Voice announcement) Automatic announcement of stop & next stop Interface vehicle tracking Device Transmit GPS Location of Bus and Route Number data to back office for Vehicle Tracking, Driver Bus Route Guidance 1GB memory USB Host Port, RS232C port, RS485 ports, CAN port, Wi‐Fi Support Hindi and English language display Works on Bus Battery c. The Controller unit interfaces with following devices On Board Display Voice Announcement Device Vehicle Tracking Device On Board Camera Electronic Ticketing machine (thru Wi‐ Fi/Bluetooth) The System integrates all JnNURM buses plying in the city with central control station, Bus stand and Bus terminals.
22.
LED Display Front/Rear
Sl. REQUIRED SPECIFICATION a. LED based Display system as per dimensions of the bus to display data from the Control Unit . These Display units will be placed in front and rear of the bys to display bus number and route details.
OFFERED SPECIFICATION
REMARKS
23.
Cables and Accessories
Sl. REQUIRED SPECIFICATION
a.
OFFERED SPECIFICATION accessories
All Cables and required to connect devices within the BUS .
REMARKS
24.
System Integration
Sl. REQUIRED SPECIFICATION
a.
OFFERED SPECIFICATION System Integration will be the one
REMARKS
time job to be performed where by integrating the entire Hardware with the help of software customised as per requirement to meet all the requirements to run the system efficiently.
25.
Web Site (
Sl. REQUIRED SPECIFICATION
a.
OFFERED SPECIFICATION of
Design and development Website for Passengers and tourists whish can later be upgraded to a dynamic site. Some of the Key features of the Website :‐ Information portal. Feedback System Search Options Booking Options Bus Schedules and Routes.
REMARKS
26.
Service/Support and Manpowerper month
Sl. REQUIRED SPECIFICATION
a.
OFFERED SPECIFICATION This will include providing live
REMARKS
support for systems installed at Control Room and on buses. Adequate and skilled manpower for running complete systems at Control Room . 27.
Add‐on Battery
Sl. REQUIRED SPECIFICATION
a. Add‐on Battery – 12V, 80AH
OFFERED SPECIFICATION
REMARKS
28.
Multiplex Wiring System
1. Multiplex Wiring System Parameters Status,' Fault list’, Voltage, Current, and 'diagnostic' of all External and Internal lamps, ITS equipment , Passenger/driver, Compartment illumination, Ventilation, defroster, motors, valves, Kneeling automation, CNG, Solenoids, Speed Limiter, Fans, Buzzer, Horn , Doors Sensors & Fuel/Coolant Levels/Pressures and such parameters as related to 'Driving Habits' for the purpose of improving operational efficiency. 2. Safety Critical vehicle Systems such as Braking, door locking, Tyre behaviour. 3. Engine • Engine CAN • Engine oil Pressure, • Engine Coolant temperature, • Engine Speed in RPM, • Vehicle Speed, Engine % load (Torque), • Diagnostic message (Engine Specific) 4. Transmission • Transmission CAN • Transmission Output Shaft Speed • Transmission Input Shaft Speed • Transmission Current Gear • Transmission Oil Filter Restriction Switch • Transmission Oil Life Remaining • Transmission Service Indicator • Transmission Sump Oil Temperature • Transmission Oil Level High / Low • Hydraulic Retarder Oil Temperature • Accelerator Pedal • Diagnostic message (Transmission Specific) 5. Diesel Bus Electronics Data • Drivers Demand of Engine Torque Percentage • Actual Engine Torque Percentage • Engine And Retarder Torque • Engine Speed • Source Address Controlling Device • Engine Starter Mode • Engine Demand Torque Percentage • Accelerator Pedal 2 Low Idle Switch • Road Speed Limit Status • Accelerator Pedal Kickdown Switch • Accelerator Pedal Low Idle Switch • Accelerator Pedal Position • Percent Load At Current Speed• Remote Accelerator Pedal Position • Accelerator Pedal Position 2 • Vehicle Acceleration Rate Limit Status • Engine Temperature
• Engine Coolant Temperature • Fuel Temperature • Engine Oil Temperature • Turbo Oil Temperature • Engine Intercooler Temperature • Engine Intercooler Thermostat Opening • Engine Fluid Level Pressure • Fuel Delivery Pressure • Extended Crankcase Blow By Pressure • Engine Oil Level • Engine Oil Pressure • Crankcase Pressure • Coolant Pressure • Coolant Level 29. Test Standard Compliance Document These Tests Standard Compliances are common to PIS Controllers / Multiplexing nodes / Single Controller / Displays Offered Specifications Sl No. Test Standards Compliance 1
Performance Parametric test
2
Cold
3
Dry Heat
4
Damp Heat
5
Vibration‐Standard AIS 012/AIS:062‐10g
6
Dust and Water Ingress Protection
7
Free fall
8
ESD Protection
9
Fire Resistant
10
Reverse polarity protection without fuse
11
Over Voltage protection
12
Short Circuit protection
13
Insulation Resistance
14
Cranking Voltage
Note: To ensure service life requirements and functionality. The component shall run for 60 minutes at alternate voltage system, without effecting the service life or function. Note: All Infotainment components shall be able to withstand a Short‐circuit or overload on all external outputs without resulting in thermal damage to the component or its interfaces. All external outputs shall be over current and short‐circuit protected. Note: The components shall have an electrical energy reserve that can handle voltage drop during cranking. Component shall not reset during cranking.
15
Load Dump Test on Controller
16
Salt Spray Test
17
EMC
18
Operating Parameters
30.
31.
Critical DTC messages for PIS Signs Sl No.
Description
1
Overvoltage
2
Low Voltage
3
Overheat
Critical Error messages for PIS Signs Description Sl No. Hardware Revision 1 Serial Number 2 Boot Loader SW Revision 3 Application SW Revision 4 Front Library Revision 5 CPU part number 6 CPU Qualification 7 CPU temperature range 8 Compilation of FW date and time 9 Flash Update status 10 Test date and time 11 Article number sign level 12 Production date 13 End Customer 14 Order number 15 Bus/Vehicle type 16 Bus builder number (bus build) 17 Language 18 Board temp sensor 19 Internal CPU temp 20 Min temp CPU 21 Max temp CPU 22 Max temp board 23 Min temp board 24 Max Input poer voltage 25 Min Input poer voltage 26 Operating hours 27 Number of resets 28
32.
33.
Diagnostic Trouble Codes Comments Sl No. 1
Watchdog reset
2
Low voltage reset
3
Lost communication, GPS satellite (GPS receiver is not available to the system)
4
GPS antenna error
5
USB, Invalid USB Mass Storage device
6
USB, Unknown USB device connected
7
USB, USB invalid File system
8
USB, overcurrent
9
Overvoltage
10
Low Voltage
11
Overheat
Parameter IDs Description Sl No. 1
Hardware revision
2
Serial number
3
Bootloader SW revision
4
Application SW revision
5
Font library revision
6
CPU part number
7
CPU qualification
8
CPU temperature range
9
Compilation of FW date and time
10
Test date and time
TENDER FORM (To be signed and submitted by Bidder) From M/s.___________________ _______________________ _______________________ _______________________ _______________________ To The Secretary, Meghalaya Urban Development authority, Parking Cum Shopping Complex Police Bazar, shilling – 793001 Sub: ‐ Supply, Installation and Maintenance of Intelligent Tracking System (ITS) components for Buses under JnNURM of the Ministry of Urban Development. Dear Sirs, I/We hereby offer to carry out and complete the work referred to above in accordance with the enclosed schedule of work, specifications and such other details as may be supplied from time to time by the MUDA (Purchaser) or its authorized representative at the rate offered by me/us in the schedule. I/we further undertake to complete the work in 30 days from the date of acceptance of the work order. Should this tender be accepted, I/We hereby agree to abide by and fulfill all the terms and provisions of the conditions of the contract annexed here to. We confirm that we have not been disqualified by any Govt. Dept. / PSU for supply of Supply, Installation and Maintenance of Intelligent Tracking System (ITS) components. Should it be found that our Company / Firm was under disqualification prior to filling up this tender, we will be subject to immediate disqualification and our Earnest Money Deposit / security Deposit is likely to be forfeited. Also we understand that in such eventuality, the purchaser, is liable to cancel the award / Letter of intent / Purchase order (if given to us). Further, Earnest Money Deposit (EMD)/ Security Deposit, in full value of which is to be absolutely forfeited to MUDA, should I/We fail to complete the work specified. We hereby undertake to provide Performance Security equivalent to 10% of the value of the Invoice amount with a validity period of three years (renewable for a further period as per requirement) OR MUDA may retain the EMD & SD to be released after three years (or afterwards as per requirement). Place: Yours faithfully, Date: Signature of the bidder with seal
PRICE SCHEDULE FORMS Note: In information systems procurement, the Contract Price (and payment Schedule) should be linked as much as possible to achievement of operational capabilities, not just to the physical delivery of technology. General 1. The Price Schedules are divided into separate Schedules as follows: a. Grand Summary Cost Table b. Supply and Installation Cost Summary Table c. Recurrent Cost Summary Table 2. The Schedules do not generally give a full scope of the information technologies to be supplied, installed, and operationally accepted, or the Services to be performed under each item. The quoted rates and prices shall be deemed to cover the full scope of these Technical Requirements, as well overhead and profit. 3. The Schedule does not cover costs to be incurred by means of rental for usage of connectivity methods like Lease Line/Rental for GSM networks for sending messages/Internet Usage Charges. SL PARTICULARS QTY A/U RATE CONTROL ROOM 1 72" LCD Display 2 Nos 2 Server 4 Nos 3 Windows Server 2012 DC 2 Nos 4 Desktop Computer 8 Nos 5 24 Port Core Switch 1 Nos 6 24 Port distribution switch 1 Nos 7 24 Port GBIC Switch Managed L2 1 Nos 8 GSM Modem 4 Nos 9 Storage box 2 Nos 10 Air Conditioner 2 Nos 11 Network Printer 1 Nos 12 10 KVA UPS 1 Nos 13 Antivirus Software Corporate for 4 Server 1 Nos 14 Firewall 2 Nos 15 Furniture and Fixture 1 Job 16 Command and Control Software 1 Nos 17 Software Licence (CAL) Per Bus per month 120 Nos 18 TOTAL ( 1 to 17) 19 VAT/CST on SL 18 20 TOTAL WITH TAX (18+19) 21 Installation and Commissioning 1 Job 22 SERVICE TAX ON (21) 23 TOTAL WITH SERVICE TAX (21+22)
AMOUNT
BUS 24 Digital Video Recorder(DVR) 120 Nos 25 Dome Camera 240 Nos 26 Announcement System with internal Display 120 Nos 27 Driver Information System 120 Nos 28 Software Licence per month (GPS,DMS,AS) 120 Nos 29 LED Display Front 120 Nos 30 LED Display Rear 120 Nos 31 Cables and Accessories 120 Nos 32 Add‐on Battery 120 Nos 33 Reverse Camera 120 Nos 34 TOTAL ( 24 to 33) 35 VAT/CST on SL 34 36 TOTAL WITH TAX (34+35) 37 Installation and Configuration 120 Job 38 SERVICE TAX ON (37) 39 TOTAL WITH SERVICE TAX (37+38) OTHERS 40 System Integration 1 Job 41 Web Site 1 Nos 42 Service/Support and Manpower per month 1 Month 43 TOTAL(40 to 42) 44 SERVICE TAX ON (43) 45 TOTAL WITH SERVICE TAX (43+44) GRAND TOTAL Rupees___________________________________________________________________________Only. The Prices are inclusive of All Duties and Taxes. The Prices are valid for a period of 120 days from the date of deposit of this tender. AMC @ ________For First Year AMC @________For Second Year AMC @________For Third Year. AMC @________For Fourth Year AMC @________For Fifth Year. Name of Bidder: Authorized Signature of Bidder:
