Transcript
SB-5440 8x1 COMPOSITE VIDEO ROUTING SWITCHER VIDEO
Input : 8x COMPOSITE VIDEO (RCA Connectors) Output : 1x COMPOSITE VIDEO (RCA Connector)
INTRODUCTION
SWITCHER
DIAGRAM TYPICAL
SB-5440 is a 8 Inputs To 1 Output Composite Video Router Switcher. This switcher video use Bandwidth 100MHz product. It’s one of the most innovative Composite Video Routing Switcher product on the market today. Support wall
OUTPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
mount pair Rack mount type. It has 8 individual inputs with 1 individual output. Because it is a router switcher, so any inputs may be routed to any 1 output. It completely eliminates the need to constantly move around Composite Video
Plasma / LCD Display
input and output cables. This switcher is ideally suited for full HDTV for the
TV-1
resolution of 480p, 720p. Control is provided via front selections push buttons
-8
with LED readout or IR remote controller. DV
D
-7
07
-6 -5 -4 -3
HD Device Source -DVD Player - VCR Player -HD Player -Sat. Receiver
-2 -1 DV
FEATURES
SPECIFICATIONS
01. Support 8 Inputs To 1 Output Composite Video (RCA) Router Switcher 02. Support switch signal Composite Video via 8x RCA Connectors 03. Video Bandwidth : 100MHz (-3dB) 04. Infrared : IR Remote Control via Frequency (38KHz) 05. Suitable for full HD high resolution Video player device and HDTV, LCD TV, Plasma TV, HD Monitor displays 06. Controls by Front panel selection pushbuttons with LED readout and IR Remote Controller 07. Support Lower power consumed full load under 450 mA 08. Power supply offer a universal type 100~240 VAC switch
D
Type of switcher
8 inputs to 1 output Router Switcher
Type of Signals
Composite Video via 8x RCA Female Connector
Video Bandwidth
100MHz, (-3dB)
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
Scan Rates Accepted
50Hz or 60Hz
IR Infrared Frequency 38 KHz Controls
Direct selection via Front panel pushbuttons with LED readout or IR Remote Controller
Safety Approvals
CE, FCC, VCCI
Dimension (WxDxH)
6.90" x 3.12" x 1.00" (176mm x 80mm x 25mm)
Weight
0.5 kg / 1.1 lb
Power Voltage Input
DC 12V @ 1A
2015 Copyirghted All Rights Reserved.
07-01
SB-5440BNC 8x1 COMPOSITE VIDEO(BNC) SWITCHER VIDEO
Input : 8x COMPOSITE VIDEO (BNC Connectors) Output : 1x COMPOSITE VIDEO (BNC Connector)
INTRODUCTION
BNC
SWITCHER
DIAGRAM TYPICAL
SB-5440BNC is a 8 inputs to 1 output Composite Video Router Switcher via BNC connector. The video use Bandwidth 100MHz product. It’s one of the most innovative Composite Video Routing Switcher product on the market today. It
OUTPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
has 8 individual inputs with 1 individual output. Because it is a Router Switcher, so any inputs may be routed to any one output. It completely eliminates the need to constantly move around Composite Video input and output cables.
Plasma / LCD Display
This switcher is ideally suited for TV for the resolution of 480p, 720p. Control is provided via front selections push buttons with LED readout or IR remote
TV-1
controller.
-8 DV
D
-7 -6 -5
07
-4 -3
HD Device Source -DVD Player - VCR Player -HD Player -Sat. Receiver
-2 -1 DV
FEATURES
SPECIFICATIONS
01. Support 8 Inputs to 1 Output Composite Video (BNC) Router Switcher 02. Support switch signal Composite Video via 8x BNC Connectors 03. Video Bandwidth : 100MHz (-3dB) 04. Infrared : IR Remote Control via Frequency (38KHz) 05. Suitable for full HD high resolution Video player device and HDTV, LCD TV, Plasma TV, HD monitor displays 06. Controls by Front panel selection pushbuttons with LED readout and IR Remote Controller 07. Support Lower power consumed full load under 450 mA 08. Power supply offer a universal type 100~240 VAC switch
07-02
D
Type of switcher
8 inputs to 1 output Router Switcher
Type of Signals
Composite Video via 8x BNC Female Connector
Video Bandwidth
100MHz, (-3dB)
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
Scan Rates Accepted
50Hz or 60Hz
IR Infrared Frequency 38 KHz Controls
Direct selection via front panel pushbuttons with LED readout or IR Remote Controller
Safety Approvals
CE, FCC, VCCI
Dimension (WxDxH)
6.90" x 3.12" x 1.00" (176mm x 80mm x 25mm)
Weight
0.5 kg / 1.1 lb
Power Voltage Input
DC 12V @ 1A
2015 Copyirghted All Rights Reserved.
SB-5440SV 8x1 S-VIDEO ROUTER SWITCHER S-VIDEO SWITCHER
Input : 8x S-VIDEO (Y/C via Mini-Din 4-pin Female Connectors) Output : 1x S-VIDEO (Y/C via Mini-Din 4-pin Female Connectors)
INTRODUCTION
DIAGRAM TYPICAL
SB-5440SV is a 8 Inputs To 1 Output S-Video(Y/C) Router Switcher. This switcher video use Bandwidth 100MHz product. It’s one of the most innovative S-Video(Y/C) Video Routing Switcher product on the market today. Support
OUTPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
wall mount pair Rack mount type. It has 8 individual inputs with 1 individual output. Because it is a router switcher, so any inputs may be routed to any 1 output. It completely eliminates the need to constantly move around S-Video (Y/C) input and output cables. This switcher is ideally suited for TV for the
S -V
resolution of 480p, 720p. Control is provided via front selections push buttons with LED readout or IR remote controller.
IDE
HD
O -8
TV
DV
DV
DV
DV
DV
DV
DV
DV
FEATURES 02. Support switch signal S-Video via 8x Mini-din Female Connectors 03. Video Bandwidth : 100MHz (-3dB) 04. Infrared : IR Remote Control via Frequency (38KHz) 05. Suitable for full HD high resolution Video player device and HDTV, LCD TV, Plasma TV, HD Monitor displays 06. Controls by Front panel selection pushbuttons with LED readout and IR Remote Controller 08. Power supply offer a universal type 100~240 VAC switch
D
D
D
D
D
D
-7 -6 -5 -4 -3 -2
07
S-Video Device Sources -DVD Player - VCR Player -HD Player -Sat. Receiver
-1
D
SPECIFICATIONS
01. Support 8 Inputs To 1 Output S-Video Routing Switcher
07. Support Lower power consumed full load under 450 mA
D
Type of switcher
8 inputs to 1 output S-Video Router Switcher
Type of Signals
S-Video via 8x Mini-Din Female Connectors
Video Bandwidth
100MHz, (-3dB)
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
Scan Rates Accepted
50Hz or 60Hz
IR Infrared Frequency 38 KHz Controls
Direct selection via front panel pushbuttons with LED readout or IR Remote Controller
Safety Approvals
CE, FCC, VCC I, Erp, WEEE
Dimension (WxDxH)
6.90" x 3.12" x 1.00" (176mm x 80mm x 25mm)
Weight
0.5 kg / 1.1 lb
Power Voltage Input
DC 12V @ 1A
2015 Copyirghted All Rights Reserved.
07-03
SB-5420 4x2 AUTO SCAN AV SWITCHER
AUTO
Input : 4x AV Composite video, Stereo Audio (AR/AL) Output : 2x AV Composite video, Stereo Audio (AR/AL)
COMPOSITE
AUDIO
SWITCHER
DIAGRAM TYPICAL DVD
Video
Video TV-1
GAME
Satellite Receiver
INPUT INPUT
AV Players
OUTPUT
INPUT OUTPUT
INPUT
SB-5420
OUTPUT
Video TV-2
FEATURES
SPECIFICATIONS
01. Automatically Scan 4x inputs to 2x outputs AV Switcher 02. Support Signals Composite Video and Stereo Audio (AR/AL) 03. Suitable for HD high resolution Video player device and LCD/Plasma monitor displays. The HDTV Resolution 480i, 480p, 576p, 720p 04. Video Bandwidth : 100MHz, (-3dB) 2Vpp 05. Audio bandwidth : 30MHz. (-3dB) 06. Audio Frequency Respond : 20Hz ~ 20KHz 07. Low all hostile crosstalk of -56dB @ 5MHz 08. Competible NTSC or PAL TV Video System 09. Automatically Scan input AV signals switch to output. 10. Support output status via LED readout on front panel 11. Select Auto and Manu function via selection press button on front panel 12. Support Lower power consumed full load under 150 mA 13. Power supply offer a universal type 100~240 VAC switch
Type of Switcher Type of Signals Video Bandwidth Audio Bandwidth Audio Frequency Respond All Hostile Crosstalk Scan Rates accepted Controls Scan Signal Safety Approvals Dimension (WxDxH) Weight Power Voltage Input
4 inputs to 2 outputs Auto scan switcher Composite Video and Stereo Audio (AR/AL) signals 100MHz, (-3dB) 2Vpp 30MHz, (-3dB)(Audio-Right=30MHz, Audio-Lift=30MHz) 20Hz~20KHz -56dB @ 5MHz 50Hz or 60Hz Manu or Auto via press buttons on front panel Support Automatically Scan AV signals function CE, FCC 7.80" x 5.12" x 1.73" (200mm x 130mm x 44mm) 0.45 kg / 1 lb DC 12V @ 1A
SB-5425 4x2 AUTO SCAN S-VIDEO•AUDIO SWITCHER
07
AUTO S-VIDEO AUDIO
Input : 4x S-Video, Stereo Audio (AR/AL) Output : 2x S-Video, Stereo Audio (AR/AL)
SWITCHER
DIAGRAM TYPICAL DVD
Video
S-Video TV-1
GAME
Satellite Receiver
INPUT INPUT
SV Players
OUTPUT
INPUT
SB-5425
FEATURES
OUTPUT
S-Video TV-2
SPECIFICATIONS
01. Automatically Scan 4x inputs to 2x outputs S-Video / Stereo Audio Switcher 02. Support Signals of S-Video(Y/C) and Stereo Audio (AR/AL) 03. Suitable for HD high resolution Video player device and LCD/Plasma monitor displays. The HDTV Resolution 480i, 480p, 576p, 720p 04. Video Bandwidth :100MHz, (-3dB) 2Vpp 05. Audio bandwidth :30MHz. (-3dB) 06. Audio Frequency Respond : 20Hz ~ 20KHz 07. Low all hostile crosstalk of -56dB @ 5MHz 08. Competible NTSC or PAL TV Video System 09. Automatically Scan input S-Video/Audio signals switch to output. 10. Support output status via LED readout on front panel 11. Select Auto and Manu function via selection press button on front panel 12. Support Lower power consumed full load under 150 mA 13. Power supply offer a universal type 100~240 VAC switch
07-04
OUTPUT
INPUT
Type of Switcher Type of Signals Video Bandwidth Audio Bandwidth Audio Frequency Respond All Hostile Crosstalk Scan Rates accepted Controls Scan Signal Safety Approvals Dimension (WxDxH) Weight Power Voltage Input
2015 Copyirghted All Rights Reserved.
4 inputs to 2 outputs Auto scan switcher S-Video(Y/C) and Stereo Audio (AR/AL) signals 100MHz, (-3dB) 2Vpp 30MHz, (-3dB) (Audio-Right=30MHz, Audio-Lift=30MHz) 20Hz ~20KHz -56dB @ 5MHz 50Hz or 60Hz Manu or Auto via press buttons on front panel Support Automatically Scan AV signals function CE, FCC 7.80" x 5.12" x 1.73" (200mm x 130mm x 44mm) 0.45 kg / 1 lb DC 12V @ 1A
SB-5430 4x2 S-VIDEO•COMPOSITE VIDEO•AUDIO SWITCHER Input : 4x S-VIDEO(Y/C), COMPOSITE VIDEO, Stereo Audio (AR/AL) Output : 2x S-VIDEO(Y/C), COMPOSITE VIDEO, Stereo Audio (AR/AL)
SB-5430 4:2 Routing Switcher
S-VIDEO COMPOSITE
VIDEO
SWITCHER
AUDIO
SB-5430M 1RU Metal case
Ear Rack : 1U-300L
INTRODUCTION
DIAGRAM TYPICAL
SB-5430 is a 4 Inputs to 2 Outputs S-video, Composite Video & Stereo Audio Router Switcher. The Video Bandwidth 100MHz Router Switcher product. It’s one of the most innovative signal S-Video(Y/C), Composite Video and Stereo Audio (AR/AL) Switching product on the market today. Support 19 inch Ear
OUTPUT
mount pair part number #1U-300L and MRM is 19 inch 1RU Rack mount type.
INPUT INPUT
It has 4 individual inputs with 2 individual outputs. Because it is a 4 to 2 signal
OUTPUT
Router Switcher, any input may be routed to output. It completely eliminates
INPUT INPUT
the need to constantly move around S-Video, Video and Stereo Audio input and output cables. This Router Switcher is ideally suited for full HDTV for the resolution of 480p, 720p. Control is provided via front pushbuttons with LED
1-DVD Player
readout or IR remote controller.
TV
DV
2-VCR Player DV
DV
S-Vidoe or Video TV Players
FEATURES
D
DV
D
D
4-Sat. Receiver
D
SPECIFICATIONS
01. Support 4 inputs to 2 outputs S-Video-Composite Video-Audio Switcher
Type of switcher
4 inputs to 2 outputs Component-Audio Router Switcher
Video Bandwidth
100MHz, (-3dB) 2V p-p
Audio Bandwidth
30MHz, (-3dB)(Audio-Right=30MHz, Audio-Lift=30MHz)
Audio Frequency Respond
20Hz ~20KHz
07. Infrared : IR Remote Control via Frequency (38KHz)
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
08. Signals switch including: S-Video(Y/C), Composite & Stereo Audio(AR/AL)
Scan Rates Accepted
50Hz or 60Hz
09. Direct selection channel via Front pushbuttons with LED readout
IR Infrared Frequency 38 KHz
02. Support HDTV Resolution for 480i, 480p, 576p, 720p 03. Video Bandwidth : 100MHz (-3dB), 200 mVp-p 04. Audio bandwidth : 30MHz 05. Audio Frequency Respond : 20Hz ~ 20KHz 06. Scan Rates Accepted for 50Hz or 60Hz
10. Enclosure type : SB-5430M Support 19 inch Ear & 1RU Rack mountable 11. Support Lower power consumed full load under 250 mA 12. Power supply offer a universal type 100~240 VAC switch
07
3-HD Player
Controls
Direct switch channel via front Panel selection buttons with LED readout or IR Remote Controller
Safety Approvals
CE, FCC, VCCI, Erp, WEEE
Dimension (WxDxH)
SB-5430 : 9.45" x 5.7" x 1.77" (240mm x 145mm x 45mm) SB-5430M : 11.97" x 6.06" x 1.73" (304mm x 154mm x 44mm)
Weight
0.5 kg / 1.10 lb ---- SB-5430 1.4 kg / 3.08 lb ---- SB-5430M
Power Voltage Input
DC 12V @ 1A
2015 Copyirghted All Rights Reserved.
07-05
SB-5450 4x2 S-VIDEO•COMPOSITE VIDEO•AUDIO MATRIX SWITCHER S-VIDEO COMPOSITE
Input : 4x S-VIDEO(Y/C), COMPOSITE VIDEO, Stereo Audio (AR/AL) Output : 2x S-VIDEO(Y/C), COMPOSITE VIDEO, Stereo Audio (AR/AL)
MATRIX
SB-5450 4x2 Matrix Switcher
SWITCHER
VIDEO AUDIO
SB-5450M 1RU Metal case
Ear Rack : 1U-300L
INTRODUCTION
DIAGRAM TYPICAL
SB-5450 is a 4 Inputs to 2 Outputs for S-video, Composite Video & Stereo Audio Matrix Router Switcher. This is a Video Bandwidth 100MHz Matrix Router Switcher product. It’s one of the most innovative S-Video(Y/C), Composite Video and Stereo Audio (AR/AL) Matrix Switching product on the market
OUTPUT INPUT
today. Support 19 inch Ear mount pair part number #1U-300L and MRM is
INPUT
19 inch 1RU Rack mount type. It has 4 individual inputs with 2 individual
OUTPUT
INPUT
outputs. Because it is a Matrix Router Switcher, so any input may be routed
INPUT
to any output. It completely eliminates the need to constantly move around S-Video,Composite and Stereo Audio input and output cables. This Matrix
HD Device Source
Switcher is ideally suited for full HDTV for the resolution of 480p, 720p. Control
1-DVD Player
HDTV
is provided via front selections pushbuttons with LED readout or IR remote
07
controller.
DV
D
2-VCR Player DV
DV
DV
D
D
3-HD Player 4-Sat. Receiver
D
S-Vidoe or Video TV Players
FEATURES
SPECIFICATIONS
01. Support 4 to 2 S-Video-Composite Video-Stereo Audio Matrix Switcher 02. Support HDTV Resolution for 480i, 480p, 576p, 720p 03. Video Bandwidth : 100MHz (-3dB), 200 mVp-p 04. Audio bandwidth : 30MHz 05. Audio Frequency Respond : 20Hz ~ 20KHz 06. Scan Rates Accepted for 50Hz or 60Hz 07. Infrared : IR Remote Control via Frequency (38KHz) 08. Signals switch including: S-Video(Y/C), Composite & Stereo Audio(AR/AL)
Type of switcher
4 inputs to 2 outputs Matrix Router Switcher
Video Bandwidth
100MHz, (-3dB) 2V p-p, S-Video(Y/C) and Composite Vidoe
Audio Bandwidth
30MHz, (-3dB)(Audio-Right=30MHz, Audio-Lift=30MHz)
Audio Frequency Respond
20Hz ~20KHz
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
09. Front panel control via selection channel pushbuttons with LED readout
Scan Rates Accepted 50Hz or 60Hz
10. Enclosure type : SB-5430M Support 19 inch Ear & 1RU Rack mountable
IR Infrared Frequency
38 KHz
Controls
Direct selection via front panel pushbuttons with LED readout or IR Remote Controller
Safety Approvals
CE, FCC, VCCI, Erp, WEEE
Dimension (WxDxH)
SB-5450 : 9.45" x 5.7" x 1.77" (240mm x 145mm x 45mm) SB-5450M : 11.97" x 6.06" x 1.73" (304mm x 154mm x 44mm)
Weight
0.5 kg / 1.10 lb ---- SB-5450 1.4 kg / 3.08 lb ---- SB-5450M
11. Support Lower power consumed full load under 250 mA 12. Power supply offer a universal type 100~240 VAC switch
Power Voltage Input DC 12V @ 1A
07-06
2015 Copyirghted All Rights Reserved.
SB-5544 4x4 AV MATRIX SWITCHER MATRIX
Input : 4x COMPOSITE VIDEO, 4x Stereo Audio (AR/AL) Output : 4x COMPOSITE VIDEO, 4x Stereo Audio (AR/AL)
PRO
AUDIO
VIDEO
Ear Rack : 1U-300L
INTRODUCTION
DIAGRAM TYPICAL
SB-5544 support (4) Inputs to (4) Outputs signals Composite Video & Stereo Audio Matrix Router Switch. The Video Bandwidth is 450MHz and support LCM display show out the status. Its one of the most innovative Composite Video
OUTPUT
and Stereo Audio (AR/AL) Matrix Switching product on the market today.
OUTPUT INPUT
Support 19 inch Ear mount pair part number #1U-300L and MRM is full 19
INPUT
inch 1RU Rack mount part type. It has (4) individual inputs with (4) individual outputs. Because it is a Matrix Switcher, so any input may be routed to any output. It completely eliminates the need to constantly move around Composite Video and Stereo Audio input and output cables. This switcher is ideally suited for full High Definition LCD HDTV Television for NTSC 50/60Hz and PAL 50/60Hz TV system or HD Plasma display monitor resolution applications. Support world
HDTV
wide control functions: ALL/OFF/RECALL/ENTER/MEMORY/EDID/LOCK, Control is provided via front panel push buttons, IR remote or RS-232. A RS-232
-1
Stereo Audio AR/AL
DV
Windows GUI interface is provided for matrix routing control (Windows only).
D
07
-2 -3 -4
HD Device Source
FEATURES
-DVD - VCR -HD -Sat.
PC RS232 Control Player Player Player Receiver
SPECIFICATIONS
01. Supports 4x inputs to 4x outputs A/V (Composite Video-Audio) Matrix Switcher 02. Input/Output signals via Composite Video & Stereo Audio(AR/AL) 03. Higher Video Bandwidth 450MB each path signals 04. Supported selection buttons direct channel on front panel 05. Audio support Stereo Audio (AR/AL) 06. Various User Interface controls : • Windows based GUI control via RS-232 port • Front Panel push button • IR wireless remote controller • Third party RS-232 controller (via simple ASCII) 07. Wall mounted Ear Rack included 08. Power supply DC12Volt, Universal Type Switch 100~240VAC, 50/60Hz
Type of AV Switcher 4 in To 4 out, A/V (Composite Video-Audio) Matrix Switcher Video : Composite Video 0.5~1.0Vpp, 75 Ohms, RCA connector Video support 4x Video (Composite Video) use BNC connectors Stereo Audio (AR/AL), Via 2x RCA connector(Red/white) Audio support 4x Audio (Stereo Audio) use RCA connectors Video Bandwidth 450MHz (-3db), 200mVp-p, Higher resolution formats Audio Bandwidth 60MHz, (-3db), Audio-R60MHz, Audio-L 60MHz Audio Frequency Respond 20Hz ~20KHz Low all hostile -56dB @ 5MHz, -45dB @ 50MHz crosstalk Gain control 60MHz 0.1dB gain flatness Scan Rates Accepted 50Hz or 60Hz 1x Select & Function buttons on front panel (Data status via LCM panel show out) Switch Controls 1x IR Remote Controller (switch control) 1x RS 232 series interface (switch control) Infrared Frequency 38 KHz IR External Distance ~984 feet / 300 meters maximum. AV I/O Connector Video : RCA, Audio : RCA connector. Dimension (WxDxH) 11.97" x 5.95" x 1.73" (304mm x 150mm x 44mm) Rack Mount 1RU High 19" Rack Mount #1U-300L (with rack mount) DC12V / 2A (consumption 1000mA), Power Supply Use Universal Type 50/60Hz,100~240 VAC Safety Approvals CE, FCC, VCCI, Erp, WEEE Weight 1.4 Kg / 3.09 lb
2015 Copyirghted All Rights Reserved.
07-07
SB-5544LCM 4x4 AV MATRIX SWITCHER MATRIX
Input : 4x COMPOSITE VIDEO, 4x Stereo Audio (AR/AL) Output : 4x COMPOSITE VIDEO, 4x Stereo Audio (AR/AL)
PRO
AUDIO
VIDEO
Ear Rack : 1U-300L
INTRODUCTION
DIAGRAM TYPICAL
SB-5544-LCM support (4) inputs to (4) outputs signals Composite Video & Stereo Audio Matrix Router Switch. The Video Bandwidth is 450MHz and support LCM display show out the status. It’s one of the most innovative
OUTPUT
Composite Video and Stereo Audio (AR/AL) Matrix Switching product on the
OUTPUT INPUT
market today. Support 19 inch Ear mount pair part number #1U-300L. It has
IR EXT.
INPUT
(4) individual inputs with (4) individual outputs. Because it is a Matrix Switcher, so any input may be routed to any output. It completely eliminates the need to constantly move around Composite Video and Stereo Audio input and output cables. This switcher is ideally suited for full High Definition LCD HDTV Television for NTSC 50/60Hz and PAL 50/60Hz TV system or HD Plasma display monitor resolution applications. Support world wide control functions ALL / OFF
HDTV
/ RECALL / ENTER / MEMORY / LOCK Control is provided via front panel push buttons, IR remote or RS-232. A RS-232 Windows GUI interface is provided for
-1
Stereo Audio AR/AL
DV
matrix routing control (Windows only).
D
-2 -3
07
-4
HD Device Source
FEATURES
PC RS232 Control Player Player Player Receiver
SPECIFICATIONS
01. Supports 4x inputs to 4x outputs A/V (Composite Video-Audio) Matrix Switcher 02. Input/Output signals via Composite Video & Stereo Audio(AR/AL) 03. Support Video Bandwidth 450MHz (13dB),200mVp-p for each path signals 04. Audio Bandwidth 60MHz 05. Audio Frequency Respond : 20Hz ~ 20KHz 06. Supported selection buttons direct channel on front panel 07. Composite Video supports both NTSC and PAL TV system 08. Audio support Stereo Audio (AR/AL) 09. Various User Interface controls: • Windows based GUI control via RS-232 port • Front Panel push button • IR wireless remote controller • Third party RS-232 controller (via simple ASCII) 10. Support world wide (6)x control function keys: ALL / OFF / LOCK / RECALL / MEMORY / ENTER 11. Wall mounted Ear Rack included 12. Power supply DC12Volt, Universal Type Switch 100~240VAC, 50/60Hz
07-08
-DVD - VCR -HD -Sat.
Type of AV Switcher Video support Audio support Video Bandwidth Audio Bandwidth Audio Frequency Low all hostile crosstalk Gain control Scan Rates Accepted
4 in to 4 out, A/V (Composite Video-Audio) Matrix Switcher Video:Composite Video 0.5~1.0Vpp, 75 Ohms, RCA connector Stereo Audio (AR/AL) Via 2x RCA connector (Red/white) 450MHz (-3dB), 200mVp-p, Higher resolution formats 60MHz, (-3dB), Audio-R60MHz, Audio-L 60MHz Respond 20Hz ~20KHz -56dB @ 5MHz, -45dB @ 50MHz 60MHz 0.1dB gain flatness 50Hz or 60Hz 1x Select & Function buttons on front panel (Data status via LCM panel show out) 1x IR Remote Controller (switch control) Switch Controls 1x IR External port (switch control via 3.5mm OD Jack) 1x RS 232 series interface (switch control) Source Status Input status LEDs indicates presence of a live signal (14) Function 1.ALL, 2.OFF, 3.RECALL, 4.ENTER, 5.MEMORY, 6.LOCK, Control Keys 7.Destination button (1) thru (4), 8.Source button (1) thru (4) Infrared Frequency 38 KHz IR External Distance ~984 feet / 300 meters maximum AV I/O Connector Video : RCA, Audio : RCA connector Dimension (WxDxH) 11.97" x 5.95" x 1.73" (304mm x 150mm x 44mm) Rack Mount 1RU High 19 "Rack Mount #1U-300L (with rack mount) DC12V / 2A (consumption 1000mA), Use Universal Type Power Supply 50/60Hz,100~240 VAC Safety Approvals CE, FCC Weight 1.95 Kg / 3.25 lb
2015 Copyirghted All Rights Reserved.
SB-5544BNC 4x4 AV MATRIX SWITCHER MATRIX
Input : 4x COMPOSITE VIDEO(BNC), 4x Stereo Audio (AR/AL) Output : 4x COMPOSITE VIDEO(BNC), 4x Stereo Audio (AR/AL)
VIDEO
AUDIO
VOLUME
PRO
BALANCE
Ear Rack : 1U-440L
INTRODUCTION
DIAGRAM TYPICAL
SB-5544BNC supported (4) inputs to (4) outputs signals Composite Video & Stereo Audio Matrix Router Switch. Composite Video use BNC and RCA for Audio connector. The Video Bandwidth is 450MHz and support LCM display show out the status. It’s one of the most innovative Composite Video and Stereo OUTPUT
Audio (AR/AL) Matrix Switching product on the market today. Stereo Audio output support Volume(+0~+100 levels) and Balance (L=0~50 , R=51~100)
INPUT OUTPUT
control function. Support 19 inch Ear mount pair part number #1U-440L. It
INPUT
has (4) individual inputs with (4) individual outputs. Because it is a Matrix Switcher, so any input may be routed to any output. It completely eliminates
IR EXT.
OUTPUT
-1
TV
DVD
-2 -3
the need to constantly move around Composite Video and Stereo Audio input
-4
and output cables. This switcher is ideally suited for full High Definition LCD
DVD Players
-1
HDTV Television for NTSC 50/60Hz and PAL 50/60Hz TV system or HD Plasma DVD
display monitor resolution applications. Support world wide control functions
TV
-2 -3
ALL / OFF / RECALL / ENTER / MEMORY / LOCK, Control is provided via front
PC RS232 Control
-4
panel push buttons, IR remote or RS-232. A RS-232 Windows GUI interface is
07
DVD Players
provided for matrix routing control (Windows only).
FEATURES
SPECIFICATIONS
01. Supports 4x inputs to 4x outputs A/V (Composite Video-Audio) Matrix Switcher 02. Input/Output signals via Composite Video & Stereo Audio(AR/AL) 03. Support Higher Video Bandwidth 450MHz (13dB),200mVp-p, for each path signals 04. Audio Bandwidth 60MHz 05. Audio Frequency Respond : 20Hz ~ 20KHz 06. Stereo Audio output support Volume(+0~+100 levels) and Balance (L50~R50) control function. 07. Supported selection buttons direct channel on front panel 08. Composite Video (BNC) supports both NTSC and PAL TV system 09. Audio support Stereo Audio (AR/AL) 10. Various User Interface controls: • Windows based GUI control via RS-232 port • Front Panel push button • IR wireless remote controller • Third party RS-232 controller (via simple ASCII) 11. Support world wide (6)x control function keys : ALL / OFF / LOCK / RECALL / MEMORY / ENTER 12. Wall mounted Ear Rack included 13. Power supply DC12Volt, Universal Type Switch 100~240VAC, 50/60Hz
Type of AV Switcher
4 in To 4 out, A/V (Composite Video-Audio) Matrix Switcher Video : Composite Video 0.5~1.0Vpp, 75 Ohms, Video support 4x Video (Composite Video) use BNC connectors Stereo Audio (AR/AL), Via 2x RCA connector (Red/ Audio support white) 4x Audio (Stereo Audio) use RCA connectors Video Bandwidth 450MHz (-3db), 200mVp-p, Higher resolution formats Audio Bandwidth 60MHz, (-3db), Audio-R60MHz, Audio-L 60MHz Audio Frequency Respond 20Hz ~20KHz Audio Volume control +0 ~ +100 levels (+6db) Audio Balance control L=+0 ~ +50, R=+51 ~ +100 Low all hostile crosstalk -56dB @ 5MHz, -45dB @ 50MHz Gain control 60MHz 0.1dB gain flatness Scan Rates Accepted 50Hz or 60Hz 1x Select & Function buttons on front panel (Data status via LCM panel show out) 1x IR Remote Controller (switch control) Switch Controls 1x IR External port (switch control via 3.5mm OD Jack) 1x RS 232 series interface (switch control) Source Status Input status LEDs indicates presence of a live signal 1.ALL, 2.OFF, 3.RECALL, 4.ENTER, 5.MEMORY, 6.LOCK, (14) Function Control Keys 7.Destination button (1) thru (4), 8.Source button (1) thru (4) Infrared Frequency 38 KHz IR External Distance ~984 feet / 300 meters maximum. AV I/O Connector Video : BNC connector, Audio : RCA connector Dimension (WxDxH) 19" x 7.87" x 1.73" (440mm x 200mm x 44mm) Rack Mount 1RU High 19 "Rack Mount #1U-440L (with rack mount) DC12V / 2A (consumption 1000mA), Use Universal Power Supply Type 50/60Hz,100~240 VAC Safety Approvals CE, FCC Weight 2.45 Kg / 4.09 lb
2015 Copyirghted All Rights Reserved.
07-09
SB-5562 8x2 S-VIDEO•VIDEO(BNC)•AUDIO MATRIX SWITCHER MATRIX
Input : 8x S-VIDEO(Y/C), COMPOSITE VIDEO(BNC), Stereo Audio (AR/AL) Output : 2x S-VIDEO(Y/C), COMPOSITE VIDEO(BNC), Stereo Audio (AR/AL)
SWITCHER
S-VIDEO
VIDEO
PRO AUDIO
Ear Rack : 1U-440L
INTRODUCTION
DIAGRAM TYPICAL
SB-5562 is a 8 Inputs to 2 Outputs S-video, Composite Video (BNC) & Stereo Audio Matrix Router Switcher. This is a Video Bandwidth 250MHz Matrix Router Switcher product. It’s one of the most innovative S-Video(Y/C), Composite Video and Stereo Audio (AR/AL) matrix switching product on the market today.
OUTPUT
Support 19 inch Ear mount pair part number #1U-440L. It has 8 individual
INPUT
INPUT
inputs with 2 individual outputs. Because it is a matrix router switcher, so
INPUT
INPUT
any input may be routed to any output. It completely eliminates the need to
HDTV
constantly move around S-Video, Composite Video and Stereo Audio input and output cables. This switcher is ideally suited for full High Definition LCD HDTV
Stereo Audio AR/AL
TV for resolution 480p, 720p 1080i and 1080p or HD Plasma display monitor applications. Control is provided via Front selections pushbuttons with LED
07
-1
readout or IR remote controller. RS-232 interface is provide with third control.
-5
A windows-based control software package is including to provide complete
-6
-3
control of the SB-5562 from a PC.
-7
-4
FEATURES 02. Support HDTV Resolution for 480i, 480p, 576p, 720p 03. Video Bandwidth : 250MHz (-3dB), 200 mVp-p 05. Audio Frequency Respond : 20Hz ~ 20KHz
PC RS232 Control
8 inputs to 2 outputs Matrix Router Switcher
Type of Signals
S-Video (Y/C) via mini-din 4pin Female connectors Composite Video via BNC Female Connector Stereo Audio (AR/AL) via 2x RCA Female Connectors
Video&Audio Bandwidth 300MHz, (-3dB) 2V p-p
06. Infrared : IR Remote Control via Frequency (38KHz) 07. Support RS-232 series interface control from a PC 08. RS-232 interface via PC control Driver compatible with 95/98/2000/XP 09. Front panel control via selection channel pushbuttons with LED readout
07-10
D
Type of switcher
04. Audio Bandwidth : 60MHz
12. Power supply offer a universal type 100~240 VAC switch
-2
SPECIFICATIONS
01. Support 8x2 S-Video-Composite Video(BNC)-Stereo Audio Matrix Switcher
11. Support Lower power consumed full load under 750 mA
D
-8 DV
10. Wall mounted Ear Rack included
DV
Audio Frequency Respond
20Hz ~20KHz
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
Scan Rates Accepted
50Hz or 60Hz
IR Infrared Frequency
38KHz
Controls
Direct selection via front panel pushbuttons with LED readout or IR Remote Controller and RS-232 series interface
Safety Approvals
CE, FCC, VCCI, Erp, WEEE
Dimension (WxDxH)
17.32" x 7.87" x 1.73" (440mm x 200mm x 44mm)
Weight
2.45 kg / 5.4 lb
Power Voltage Input
DC 12V @ 2A
2015 Copyirghted All Rights Reserved.
SB-5560 8x4 S-VIDEO•COMPOSITE VIDEO•AUDIO MATRIX SWITCHER MATRIX
Input : 8x S-VIDEO(Y/C), COMPOSITE VIDEO, Stereo Audio (AR/AL) Output : 4x S-VIDEO(Y/C), COMPOSITE VIDEO, Stereo Audio (AR/AL)
SWITCHER
S-VIDEO
VIDEO
PRO AUDIO
Ear Rack : 1U-440L
INTRODUCTION
DIAGRAM TYPICAL
SB-5560 is a 8 Inputs To 4 Outputs S-video, Composite Video & Stereo Audio Matrix Router Switcher. This is a Video Bandwidth 250MHz Matrix Router Switcher product. It’s one of the most innovative S-Video(Y/C), Composite
OUTPUT OUTPUT INPUT
Video and Stereo Audio (AR/AL) Matrix Switching product on the market today. Support 19 inch Ear mount pair part number #1U-440L. It has 8 individual inputs with 4 individual outputs. Because it is a matrix router switcher, so
INPUT
INPUT
HDTV
any input may be routed to any output. It completely eliminates the need to constantly move around S-Video, Composite Video and Stereo Audio input and
INPUT
Stereo Audio AR/AL
output cables. This switcher is ideally suited for TV Television for resolution
HDTV
480p, 720p 1080i and 1080p or HD Plasma display monitor applications.
-1 DV
Stereo Audio AR/AL
D
-2
Control is provided via front selections pushbuttons with LED readout or IR
-3
remote controller. RS-232 interface is provide with third control. A windows-
-4
07
-5
based control software package is including to provide complete control of the
-6
SB-5560 from a PC.
PC RS232 Control
-7 -8 DV
FEATURES
SPECIFICATIONS
01. Support 8 to 4 S-Video-Composite Video-Stereo Audio Matrix Switcher 02. Support HDTV Resolution for 480i, 480p, 576p, 720p 03. Video Bandwidth : 250MHz (-3dB), 200 mVp-p
Type of switcher
8 inputs to 4 outputs Matrix Router Switcher
Type of Signals
S-Video (Y/C) via 1x mini-din 4pin Female connector Composite Video via 1x RCA Female Connector Stereo Audio (AR/AL) via 2x RCA Female Connectors
04. Audio bandwidth : 60MHz 05. Audio Frequency Respond : 20Hz ~ 20KHz 06. Infrared : IR Remote Control via Frequency (38KHz) 07. Support RS-232 series interface control from a PC 08. RS-232 interface via PC control Driver compatible with 95/98/2000/XP 09. Front panel control via selection channel pushbuttons with LED readout 10. Wall mounted Ear Rack included 11. Support Lower power consumed full load under 750 mA 12. Power supply offer a universal type 100~240 VAC switch
D
Video Bandwidth
250MHz, (-3dB) 2V p-p, S-Video(Y/C) and Composite Video
Audio Bandwidth
60MHz, (-3dB)(Audio-Right=60MHz, Audio-Lift=60MHz)
Audio Frequency Respond
20Hz ~20KHz
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
Scan Rates Accepted
50Hz or 60Hz
IR Infrared Frequency 38 KHz Controls
Direct selection via front panel pushbuttons with LED readout or IR Remote Controller and RS-232 series interface
Safety Approvals
CE, FCC, VCCI, Erp, WEEE
Dimension (WxDxH)
17.32" x 7.87" x 1.73" (440mm x 200mm x 44mm)
Weight
2.45 kg / 5.4 lb
Power Voltage Input
DC 12V @ 2A
2015 Copyirghted All Rights Reserved.
07-11
SB-5548LCM 8x8 COMPOSITE VIDEO•AUDIO MATRIX SWITCHER PRO
Input : 8x COMPOSITE VIDEO, Stereo Audio (AR/AL) Output : 8x COMPOSITE VIDEO, Stereo Audio (AR/AL)
MATRIX
VIDEO
AUDIO
Ear Rack : 1U-440L
INTRODUCTION
DIAGRAM TYPICAL
SB-5548-LCM support (8) Inputs to (8) Outputs signals Composite Video & Stereo Audio Matrix Router Switch. The Video Bandwidth is 450MHz and OUTPUT
support LCM display show out the status. It’s one of the most innovative
OUTPUT
OUTPUT
Composite Video and Stereo Audio (AR/AL) Matrix Switching product on the market today. Support 19 inch Ear mount pair part number #1U-440L. It has
OUTPUT
INPUT
INPUT
INPUT
INPUT
(8) individual inputs with (8) individual outputs. Because it is a matrix switcher, so any input may be routed to any output. It completely eliminates the need to constantly move around Composite Video and Stereo Audio input and output cables. This switcher is ideally suited for full High Definition LCD HDTV
HDTV Stereo Audio AR/AL
Television for NTSC 50/60Hz and PAL 50/60Hz TV system or HD Plasma display
-1
monitor resolution applications. Support world wide control functions: ALL/ OFF/RECALL/ENTER/MEMORY/LOCK, Control is provided via front panel push buttons, IR remote or RS-232. A RS-232 Windows GUI interface is provided for
07
DVD
HDTV
-2 -3
Stereo Audio AR/AL
-4
P C RS232 Control
-5
matrix routing control (Windows only).
HD Device Source -DVD Player - VCR Player -HD Player -Sat. Receiver
-6 -7 -8 DVD
FEATURES
SPECIFICATIONS
01. Supports 8x inputs to 8x outputs A/V (Composite Video-Audio) Matrix Switcher 02. Input/Output signals via Composite Video & Stereo Audio(AR/AL) 03. Higher Video Bandwidth 450MHz (13dB),200mVp-p, each path signal 04. Audio Bandwidth 60MHz 05. Audio Frequency Respond : 20Hz ~ 20KHz 06. Supported selection buttons direct channel on front panel 07. Audio support Stereo Audio (AR/AL) 08. Various User Interface controls: • Windows based GUI control via RS-232 port • Front Panel push button • IR wireless remote controller • Third party RS-232 controller (via simple ASCII) 09. Support world wide (6)x control function keys: ALL / OFF / LOCK / RECALL / MEMORY / ENTER 10. Wall mounted Ear Rack included 11. Power supply DC12Volt, Universal Type Switch 100~240VAC, 50/60Hz
07-12
Type of AV Switcher
8 in to 8 out, A/V (Composite Video-Audio) Matrix Switcher Video : Composite Video 0.5~1.0Vpp, 75 Ohms, RCA connector Audio support Stereo Audio (AR/AL), Via 2x RCA connector(Red/white) Video Bandwidth 450MHz (-3db), 200mVp-p, Higher resolution formats Audio Bandwidth 60MHz, (-3db), Audio-R60MHz, Audio-L 60MHz Audio Frequency Respond 20Hz ~20KHz Low all hostile crosstalk -83dB@5MHz Gain control 60MHz 0.1dB gain flatness Scan Rates Accepted 50Hz or 60Hz 1x Select & Function buttons on front panel (Data status via LCM panel show out) 1x IR Remote Controller (switch control) Switch Controls 1x IR External port (switch control via 3.5mm OD Jack) 1x RS-232 series interface (switch control) Source Status Input status LEDs indicates presence of a live signal. 1.ALL, 2.OFF, 3.RECALL, 4.ENTER, 5.MEMORY, 6.LOCK, (22) Function Control Keys 7.Destination button (1) thru (8), 8.Source button (1) thru (8) Infrared Frequency 38 KHz IR External Distance ~984 feet / 300 meters maximum. AV I/O Connector Video : RCA, Audio : RCA connector. Dimension (WxDxH) 19" x 7.87" x 1.73" (482mm x 200mm x 44mm) Rack Mount 1RU High 19" Rack Mount #1U-440L (with rack mount) DC12V / 2A (consumption 1250mA), Use Universal Power Supply Type 50/60Hz,100~240 VAC Safety Approvals CE, FCC, VCCI, Erp ,WEEE Weight 3.25 Kg / 5.41 lb Video support
2015 Copyirghted All Rights Reserved.
SB-5548BNC 8x8 COMPOSITE VIDEO•AUDIO MATRIX SWITCHER MATRIX
Input : 8x COMPOSITE VIDEO(BNC), Stereo Audio (AR/AL) Output : 8x COMPOSITE VIDEO(BNC), Stereo Audio (AR/AL)
PRO
VIDEO
VOLUME
AUDIO
BALANCE
Ear Rack : 1U-440L
INTRODUCTION
DIAGRAM TYPICAL
SB-5548BNC supported (8) inputs to (8) outputs signals Composite Video & Stereo Audio Matrix Router Switch. Composite Video use BNC connector and RCA for Audio. The Video Bandwidth is 450MHz and support LCM display show out the status. It’s one of the most innovative Composite Video and Stereo IR EXT.
Audio (AR/AL) Matrix Switching product on the market today. Stereo Audio output support Volume(+0~+100 levels) and Balance (L=0~50 , R=51~100)
OUTPUT
control function. Support 19 inch Ear mount pair part number #1U-440L.
INPUT
OUTPUT
It has (8) individual inputs with (8) individual outputs. Because it is a Matrix
INPUT
Switcher, so any input may be routed to any output. It completely eliminates
-1 DVD
the need to constantly move around Composite Video and Stereo Audio input and output cables. This switcher is ideally suited for full High Definition LCD
-2 -3
Stereo Audio AR/AL
-4
HDTV Television for NTSC 50/60Hz and PAL 50/60Hz TV system or HD Plasma
-5
display monitor resolution applications. Support world wide control functions:
-6
TV
ALL/OFF/RECALL/ENTER/MEMORY/LOCK, Control is provided via front panel
-7 -8
push buttons, IR remote or RS-232. A RS-232 Windows GUI interface is
PC RS232 Control
07
DVD
DVD Player
provided for matrix routing control (Windows only).
FEATURES
SPECIFICATIONS
01. Supports 8x inputs to 8x outputs A/V (Composite Video-Audio) Matrix Switcher 02. Input/Output signals via Composite Video & Stereo Audio(AR/AL) 03. Higher Video Bandwidth 450MHz (13dB),200mVp-p, each path signals 04. Audio Bandwidth 60MHz 05. Audio Frequency Respond : 20Hz ~ 20KHz 06. Stereo Audio output support Volume(+0~+100 levels) and Balance (L50~R50) control function. 07. Supported selection buttons direct channel on front panel 08. Audio support Stereo Audio (AR/AL) 09. Various User Interface controls: • Windows based GUI control via RS-232 port • Front Panel push button • IR wireless remote controller • Third party RS-232 controller (via simple ASCII) 10. Support world wide (7) control function keys : ALL / OFF / LOCK / RECALL / MEMORY / ENTER 11. Wall mounted Ear Rack included 12. Power supply DC12Volt, Universal Type Switch 100~240VAC, 50/60Hz
Type of AV Switcher
8 in to 8 out, A/V (Composite Video-Audio) Matrix Switcher Video : Composite Video 0.5~1.0Vpp, 75 Ohms, BNC connector 8x Video (Composite Video) use BNC connectors Stereo Audio (AR/AL), Via 2x RCA connector(Red/ Audio support white) 8x Audio (Stereo Audio) use RCA connectors Video Bandwidth 450MHz (-3db), 200mVp-p, Higher resolution formats Audio Bandwidth 60MHz, (-3db), Audio-R60MHz, Audio-L 60MHz Audio Frequency Respond 20Hz ~20KHz Audio Volume control +0 ~ +100 levels (+6db) Audio Balance control L=+0 ~ +50, R=+51 ~ +100 Low all hostile crosstalk -83dB @ 5MHz Gain control 60MHz 0.1dB gain flatness Scan Rates Accepted 50Hz or 60Hz 1x Select & Function buttons on front panel (Data status via LCM panel show out) 1x IR Remote Controller (switch control) Switch Controls 1x IR External port (switch control via 3.5mm OD Jack) 1x RS 232 series interface (switch control) Source Status Input status LEDs indicates presence of a live signal (22) Function Control 1.ALL, 2.OFF, 3.RECALL, 4.ENTER, 5.MEMORY, 6.LOCK, Keys 7.Destination button (1) thru (8), 8.Source button (1) thru (8) Infrared Frequency 38 KHz IR External Distance ~984 feet / 300 meters maximum AV I/O Connector Video : BNC connector, Audio : RCA connector Dimension (WxDxH) 19" x 7.87" x 1.73" (440mm x 200mm x 44mm) Rack Mount 1RU High 19" Rack Mount #1U-440L (with rack mount) DC12V / 2A (consumption 1000mA), Use Universal Power Supply Type 50/60Hz, 100~240 VAC Safety Approvals CE, FCC Weight 2.55 Kg / 4.29 lb Video support
2015 Copyirghted All Rights Reserved.
07-13
SB-3701•SB-3701BNC 1x4 COMPOSITE VIDEO DISTRIBUTION AMPLIFIER VIDEO
Input : 1x COMPOSITE VIDEO (RCA/BNC Female Connector) Output : 4x COMPOSITE VIDEO (RCA/BNC Female Connectors)
SB-3701 1x4 VIDEO(RCA) Distribution Amplifier
AMPLIFIER
SB-3701BNC 1x4 VIDEO(BNC) Distribution Amplifier
INTRODUCTION
DIAGRAM TYPICAL
SB-3701 is a 1 Input to 4 Outputs Composite Video(RCA/BNC) Distribution Amplifier. The Video Bandwidth 80MHz Amplifier product. It’s one of the most innovative signal Composite Video via RCA connector (SB-3701) and BNC connector (SB-3701BNC) Distribution Amplifier product on the market today. Support wall mount Rack mount type. It has 1 individual input with 4 individual Outputs. Because it is a 1 to 4 signal Amplifier, any input may be
07
routed to outputs. It completely eliminates the need to constantly move around Composite Video input and output RCA or BNC cables. This Amplifier is ideally suited for TV for the resolution of 480p, 720p.
OUTPUT
INPUT OUTPUT INPUT
INPUT
DV
TV
D
DVD Player
FEATURES
SPECIFICATIONS
01. Support 1x4 Composite Video (RCA/BNC) Distribution Amplifier 02. Signals amplifier including: Composite Video 03. SB-3701 via RCA Connector, SB-3701BNC via BNC Connector
Type of switcher
1 input to 4 outputs Composite Video Distribution Amplifier
Type of Signals
Composite Video SB-3701 Via RCA connector SB-3701BNC Via BNC connector
Video Bandwidth
80MHz, (-3dB) 2V p-p
Video Boost
about 100M distance
04. Support HDTV Resolution for 480i, 480p, 576p, 720p 05. Video Bandwidth : 80MHz (-3dB), 200 mVp-p 06. Scan Rates Accepted for 50Hz or 60Hz 07. Signals amplifier including: Composite Video 08. Enclosure type : Wall Rack mountable 09. Support Lower power consumed full load under 150 mA
Scan Rates Accepted 50Hz or 60Hz Safety Approvals
CE, FCC, VCCI, REACH, Erp, WEEE
Dimension (WxDxH)
SB-3701 : 5.05" x 2.85" x 1.08" (128mm x 72.5mm x 27.5mm) SB-3701BNC : 5.05" x 2.85" x 1.08" (128mm x 72.5mm x 27.5mm)
Weight
0.3 kg / 0.66 lb
10. Power supply offer a universal type 100~240 VAC switch
Power Voltage Input DC 12V @ 1A
07-14
2015 Copyirghted All Rights Reserved.
SB-3702•SB-3702BNC 1x9 COMPOSITE VIDEO DISTRIBUTION AMPLIFIER VIDEO
Input : 1x COMPOSITE VIDEO (RCA/BNC Female Connector) Output : 9x COMPOSITE VIDEO (RCA/BNC Female Connectors)
SB-3702 1x9 VIDEO(RCA) Distribution Amplifier
AMPLIFIER
SB-3702BNC 1x9 VIDEO(BNC) Distribution Amplifier
INTRODUCTION
DIAGRAM TYPICAL
SB-3702 is a 1 input to 9 outputs Composite Video(RCA/BNC) Distribution Amplifier. The Video Bandwidth 80MHz Amplifier product. It’s one of the most innovative signal Composite Video via RCA connector(SB-3702) and BNC connector(SB-3702BNC) Distribution Amplifier product on the market today. Support wall mount Rack mount type. It has 1 individual input with 9 individual Outputs. Because it is a 1 To 9 signal Amplifier, any input may be routed to outputs. It completely eliminates theneed to constantly move around Composite Video input and output RCA or BNC cables. This Amplifier is ideally
OUTPUT OUTPUT
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT INPUT
suited for TV for the resolution of 480p, 720p.
07
TV
INPUT
TV DV
D
DVD Player
FEATURES
SPECIFICATIONS
01. Support 1x9 Composite Video (RCA/BNC) Distribution Amplifier 02. Signals amplifier including: Composite Video 03. SB-3702 via RCA Connector, SB-3702BNC via BNC Connector
Type of switcher
1 input to 9 outputs Composite Video Distribution Amplifier
Type of Signals
Composite Video SB-3702 Via RCA connector SB-3702BNC Via BNC connector
Video Bandwidth
80MHz, (-3dB) 2V p-p
Video Boost
about 100M distance
04. Support HDTV Resolution for 480i, 480p, 576p, 720p 05. Video Bandwidth : 80MHz (-3dB), 200 mVp-p 06. Scan Rates Accepted for 50Hz or 60Hz 07. Signals amplifier including: Composite Video 08. Enclosure type : Wall Rack mountable 09. Support Lower power consumed full load under 220 mA
Scan Rates Accepted 50Hz or 60Hz Safety Approvals
CE, FCC, VCCI, REACH, Erp, WEEE
Dimension (WxDxH)
SB-3702 : 5.05" x 2.85" x 1.08" (128mm x 72.5mm x 27.5mm) SB-3702BNC : 5.05" x 2.85" x 1.08" (128mm x 72.5mm x 27.5mm)
Weight
0.3 kg / 0.66 lb
Power Voltage Input
DC 12V @ 1A
10. Power supply offer a universal type 100~240 VAC switch
2015 Copyirghted All Rights Reserved.
07-15
SB-3706•SB-3706BNC 1x8 COMPOSITE VIDEO DISTRIBUTION AMPLIFIER VIDEO
Input : 1x COMPOSITE VIDEO ( RCA/BNC Female Connector) Output : 8x COMPOSITE VIDEO ( RCA/BNC Female Connectors)
SB-3706 1x8 VIDEO(RCA) Distribution Amplifier
DISTRIBUTOR
SB-3706BNC 1x8 VIDEO(BNC) Distribution Amplifier
INTRODUCTION
DIAGRAM TYPICAL
SB-3706 is a 1 input to 8 outputs Composite Video(RCA/BNC) Distribution Amplifier. The Video Bandwidth 80MHz Amplifier product. It’s one of the most innovative signal Composite Video via RCA connector(SB-3706) and BNC connector(SB-3706BNC) Distribution Amplifier product on the market
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
today. Support wall mount Rack mount type. It has 1 individual input with 8 individual outputs. Because it is a 1 to 8 signal Amplifier, any input may
INPUT
be routed to outputs. It completely eliminates the need to constantly move around Composite Video input and output RCA or BNC cables. This Amplifier is ideally suited for full HDTV Television for the resolution of 480p, 720p.
07
DV
TV
FEATURES
SPECIFICATIONS
01. Support 1x8 Composite Video (RCA/BNC) Distribution Amplifier 02. Signals amplifier including: Composite Video 03. SB-3706 via RCA Connector, SB-3706BNC via BNC Connector
Type of switcher
1 input to 8 outputs Composite Video Distribution Amplifier
Type of Signals
Composite Video SB-3706 Via RCA connector SB-3706BNC Via BNC connector
Video Bandwidth
80MHz, (-3dB) 2V p-p
Slew Rate
1000V/us, Fixed internal gain of 2
04. Support HDTV Resolution for 480i, 480p, 576p, 720p 05. Video Bandwidth : 80MHz (-3dB), 200 mVp-p 06. Scan Rates Accepted for 50Hz or 60Hz 07. Low all hostile crosstalk of -83dB@5MHz 08. Support Lower power consumed full load under 210 mA 09. Power supply offer a universal type 100~240 VAC switch
07-16
D
HD Device Source -DVD Player - VCR Player -HD Player -Sat. Receiver
Scan Rates Accepted 50Hz or 60Hz Safety Approvals
CE, FCC, VCCI, REACH, Erp, WEEE
Dimension (WxDxH)
SB-3706 : 6.93" x 3.15" x 1.00" (176mm x 80mm x 25mm) SB-3706BNC : 6.93" x 3.15" x 1.00" (176mm x 80mm x 25mm)
Weight
0.5 kg / 1.1 lb
Power Voltage Input
DC 12V @ 1A
2015 Copyirghted All Rights Reserved.
SB-3708 1x8 COMPOSITE VIDEO•AUDIO DISTRIBUTION AMPLIFIER DISTRIBUTOR
Input : 1x COMPOSITE VIDEO, Stereo Audio (AR/AL) Output : 8x COMPOSITE VIDEO, Stereo Audio (AR/AL)
SB-3708 1x8 Distribution Amplifier
VIDEO
AUDIO
SB-3708M 1RU 19inch Rack Metal case
Ear Rack : 1U-300L
INTRODUCTION
DIAGRAM TYPICAL
SB-3708 is a 1 input to 8 outputs Composite Video & Stereo Audio Distribution Amplifier. The Video Bandwidth 440MHz Distribution Amplifier product. It’s one of the most innovative Composite Video and Stereo Audio (AR/AL) Distribution Amplifier product on the market today. Support 19 inch Ear mount pair part number #1U-300L. It has 1 individual inputs with 8 individual outputs. Because
INPUT OUTPUT
it is a distributor, so one(1) input may be distribution to any eight(8) outputs in
OUTPUT
DVD Player
SB-3708
DV
D
OUTPUT
the same time. It completely eliminates the need to constantly move around
OUTPUT
Composite Video and Stereo Audio input and output cables. This Distribution Amplifier is ideally suited for distributing AV signals from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box Devices to High Definition LCD TV for HDTV resolution 480p, 720p.
07 HDTV
FEATURES
SPECIFICATIONS
01. Support 1x8 Composite Video-Stereo Audio Distribution Amplifier 02. Distributing Composite Video and Stereo Audio (AR/AL) Signals 03. Support HDTV Resolutions for 480i, 480p, 576p, 720p 04. Video Bandwidth : 440MHz (-3dB), 200 mVp-p 05. Audio Bandwidth : 60MHz 06. Audio Frequency Respond : 20Hz ~ 20KHz 07. Application Source devices from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box
Type of distributor
1 input to 8 outputs Distribution Amplifier
Type of Signals
Composite Video via 1x RCA Female Connector Stereo Audio (AR/AL) via 2x RCA Female Connectors
Video Bandwidth
440MHz, (-3dB) 2V p-p,
Audio Bandwidth
60MHz, (-3dB)(Audio-Right=60MHz, Audio-Lift=60MHz)
Audio Frequency Respond
20Hz ~20KHz
08. Power switch control via selection pushbuttons with LED readout
All Hostile Crosstalk -56dB @ 5MHz, -45dB @ 50MHz
09. Enclosure type : Support 19 inch Ear & 1RU Rack mountable
Scan Rates Accepted 50Hz or 60Hz
10. Support Lower power consumed full load under 450 mA
Slew Rate
1000V/us, Fixed internal gain of 2
Controls
Power switch selection via pushbuttons with LED readout
Safety Approvals
CE, FCC, VCCI, Erp, WEEE
Dimension (WxDxH)
SB-3708 : 9.45" x 5.70" x 1.77" (240mm x 145mm x 45mm) SB-3708M : 11.97" x 6.06" x 1.73" (304mm x 154mm x 44mm)
Weight
0.5 kg / 1.10 lb ---- SB-3708 1.4 kg / 3.08 lb ---- SB-3708M
11. Power supply offer a universal type 100~240 VAC switch
Power Voltage Input DC 12V @1A
2015 Copyirghted All Rights Reserved.
07-17
SB-3772 1x2 COMPOSITE VIDEO•AUDIO DISTRIBUTION AMPLIFIER VIDEO
Input : 1x COMPOSITE VIDEO, Stereo Audio(AR/AL) Output : 2x COMPOSITE VIDEO, Stereo Audio(AR/AL)
INTRODUCTION
AMPLIFIER
DIAGRAM TYPICAL
SB-3772 is a 1 input to 2 outputs AV Distribution Amplifier. The Video Bandwidth 80MHz Distribution Amplifier product. It’s one of the most innovative Composite Video and Stereo Audio (AR/AL) via RCA connector Distribution
OUTPUT
Amplifier product on the market today. It has 1 individual input with 2
OUTPUT INPUT
individual outputs. Because it is a 1 to 2 signal Distribution Amplifier, one (1) input may be routed to two (2) outputs. It completely eliminates the need to constantly move around Composite Video and Stereo Audio input and output cables. This Distribution Amplifier is ideally suited for TV for the resolution of 480p, 720p.
TV
07
DVD Player
DV
FEATURES
D
SPECIFICATIONS
01. Support 1x2 Composite Video / Stereo Audio Distribution Amplifier
Type of switcher
1 input to 2 outputs AV Distribution Amplifier
Type of Signals
Composite Video, Stereo Audio(AR/AL)
Video Bandwidth
80MHz, (-3dB) 2V p-p
05. Support HDTV Resolution for 480i, 480p, 576p, 720p
Audio Bandwidth
30MHz
06. Scan Rates Accepted for 50Hz or 60Hz 07. Signals amplifier including : Composite Video and Stereo Audio
Audio Frequency Respond
20Hz ~ 20KHz
08. Support Lower power consumed full load under 120 mA
Video Boost
about 100M distance
09. Power supply offer a universal type 100~240 VAC switch
Scan Rates Accepted 50Hz or 60Hz
02. Signals amplifier including: Composite Video and Stereo Audio (AR/AL) 03. Video Bandwidth : 80MHz, Composite Video 04. Audio Bandwidth : 30MHz, Stereo Audio (AR/AL)
Safety Approvals
CE, FCC, VCCI
Dimension (WxDxH) 6.93" x 3.11" x 1.00" (176mm x 80mm x 25mm) Weight
0.5 kg / 1.1 lb
Power Voltage Input DC 12V @ 1A
07-18
2015 Copyirghted All Rights Reserved.
SB-3714 1x4 COMPOSITE VIDEO•AUDIO DISTRIBUTION AMPLIFIER VIDEO
Input : 1x COMPOSITE VIDEO, Stereo Audio(AR/AL) Output : 4x COMPOSITE VIDEO, Stereo Audio(AR/AL)
INTRODUCTION
AMPLIFIER
DIAGRAM TYPICAL
SB-3714 is a 1 input to 4 outputs AV Distribution Amplifier. The Video Bandwidth 80MHz Distribution Amplifier product. It’s one of the most innovative Composite Video and Stereo Audio(AR/AL) via RCA connector Distribution Amplifier product on the market today. It has 1 individual input with 4 individual outputs. Because it is a 1 to 4 signal Distribution Amplifier, one (1)
INPUT
SB-3714
input may be routed to four (4) outputs. It completely eliminates the need to
OUTPUT
DVD Player
OUTPUT
constantly move around Composite Video and Stereo Audio input and output
DV
cables. This Distribution Amplifier is ideally suited for TV for the resolution of
D
OUTPUT
480p, 720p.
TV
OUTPUT
07
TV
FEATURES
SPECIFICATIONS
01. Support 1x4 Composite Video/Stereo Audio Distribution Amplifier
Type of switcher
1 input to 4 outputs AV Distribution Amplifier
Type of Signals
Composite Video, Stereo Audio (AR/AL)
Video Bandwidth
80MHz, (-3dB) 2V p-p
05. Support HDTV Resolution for 480i, 480p, 576p, 720p
Audio Bandwidth
30MHz
06. Scan Rates Accepted for 50Hz or 60Hz 07. Signals amplifier including: Composite Video and Stereo Audio
Audio Frequency Respond
20Hz ~ 20KHz
08. Support Lower power consumed full load under 150 mA
Video Boost
about 100M distance
09. Power supply offer a universal type 100~240 VAC switch
Scan Rates Accepted 50Hz or 60Hz
02. Signals amplifier including: Composite Video and Stereo Audio (AR/AL) 03. Video Bandwidth : 80MHz, Composite Video 04. Audio Bandwidth : 30MHz, Stereo Audio (AR/AL)
Safety Approvals
CE, FCC, VCCI, REACH, WEEE
Dimension (WxDxH) 5.12" x 3.75" x 1.58" (130mm x 95mm x 44mm) Weight
0.48 kg / 1.05 lb
Power Voltage Input DC 12V @ 1A
2015 Copyirghted All Rights Reserved.
07-19
SB-3712 1x16 COMPOSITE VIDEO•AUDIO DISTRIBUTION AMPLIFIER DISTRIBUTOR
Input : 1x COMPOSITE VIDEO, Stereo Audio (AR/AL) Output : 16x COMPOSITE VIDEO, Stereo Audio (AR/AL)
VIDEO
PRO AUDIO
Ear Rack : 1U-440L
INTRODUCTION
DIAGRAM TYPICAL
SB-3712 is a 1 input to 16 outputs Composite Video & Stereo Audio Distribution Amplifier. The Video Bandwidth 440MHz Distribution Amplifier product. It’s one of the most innovative Composite Video and Stereo Audio (AR/AL) Distribution Amplifier product on the market today. Support 19 inch Ear mount pair OUTPUT
part number #1U-440L and MRM is 19 inch 1RU Rack mount type. It has 1
OUTPUT OUTPUT OUTPUT
individual input with 16 individual outputs. Because it is a distributor, so (1)
O UT P U T
OUTPUT OUTPUT OUTPUT
input may be distribution to any (16) outputs in the same time. It completely
OUTPUT
INPUT
eliminates the need to constantly move around Composite Video and Stereo Audio input and output cables. This Distribution Amplifier is ideally suited for
I NP U T
distributing AV signals from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box Devices to LCD TV for TV
07
resolution 480p, 720p.
DVD Player
HDTV
DV
D
HDTV
FEATURES
SPECIFICATIONS
01. Support 1x16 Composite Video-Stereo Audio Distribution Amplifier
Type of distributor
1 input to 16 outputs Distribution Amplifier
Type of Signals
Composite Video via 1x RCA Female Connector Stereo Audio (AR/AL) via 2x RCA Female Connectors
Video Bandwidth
440MHz, (-3dB) 2V p-p,
Audio Bandwidth
60MHz, (-3dB)(Audio-Right=60MHz, Audio-Lift=60MHz)
Audio Frequency Respond
20Hz ~20KHz
08. Power switch control via selection pushbuttons with LED readout
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
09. Wall mounted Ear Rack included
Scan Rates Accepted 50Hz or 60Hz
10. Support Lower power consumed full load under 750 mA
Slew Rate
11. Power supply offer a universal type 100~240 VAC switch
Controls
Power switch selection via pushbuttons with LED readout
Safety Approvals
CE, FCC, VCCI, Erp, WEEE
02. Distributing Composite Video and Stereo Audio(AR/AL) Signals 03. Support HDTV Resolutions for 480i, 480p, 576p, 720p 04. Video Bandwidth : 440MHz (-3dB), 200 mVp-p 05. Audio Bandwidth : 60MHz 06. Audio Frequency Respond : 20Hz ~ 20KHz 07. Application Source devices from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box
1000V/us, Fixed internal gain of 2
Dimension (WxDxH) 17.32" x 7.87" x 1.73" (440mm x 200mm x 44mm) Weight
2.45 kg / 5.4 lb
Power Voltage Input DC 12V @2A
07-20
2015 Copyirghted All Rights Reserved.
SB-3706SV 1x8 S-VIDEO DISTRIBUTION AMPLIFIER S-VIDEO
Input : 1x S-VIDEO (Y/C via Mini-Din Female Connectors) Output : 8x S-VIDEO (Y/C via Mini-Din Female Connectors)
INTRODUCTION
DISTRIBUTOR
DIAGRAM TYPICAL
SB-3706SV is a 1 input to 8 outputs S-Video(Y/C) Distribution Amplifier. The Video Bandwidth 80MHz Amplifier product. It’s one of the most innovative signal S-Video via Mini-din female connector Distribution Amplifier product on the market today. Support wall rack mount type. It has 1 individual input with
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
8 individual outputs. Because it is a 1 to 8 signal Distributor, any input may be routed to outputs. It completely eliminates the need to constantly move around
INPUT
S-Video input and output cables. This Distribution Amplifier is ideally suited for TV for the resolution of 480p, 720p.
DV
S -V i
deo
TV
FEATURES 01. Support 1x8 S-Video (Y/C) Distribution Amplifier
SPECIFICATIONS Type of switcher
1 input to 8 outputs S-Video Distribution Amplifier
Type of Signals
S-Video (Y/C)
Video Bandwidth
80MHz, (-3dB) 2V p-p
05. Video Bandwidth : 80MHz (-3dB), 200 mVp-p
Slew Rate
1000V/us, Fixed internal gain of 2
06. Scan Rates Accepted for 50Hz or 60Hz
Scan Rates Accepted 50Hz or 60Hz
07. Support Lower power consumed full load under 210 mA
Safety Approvals
CE, FCC, VCCI, Erp , WEEE
08. Power supply offer a universal type 100~240 VAC switch
Dimension (WxDxH)
6.93" x 3.15" x 1.00" (176mm x 80mm x 25mm)
Weight
0.5 kg / 1.1 lb
Power Voltage Input
DC 12V @ 1A
02. Signals amplifier including : S-Video (Y/C) 03. Terminator via Mini-Din 4 pin Female Connector 04. Support HDTV Resolution for 480i, 480p, 576p, 720p
07
D
HD Device Source -DVD Player - VCR Player -HD Player -Sat. Receiver
2015 Copyirghted All Rights Reserved.
07-21
SB-3709 1x8 S-VIDEO•AUDIO DISTRIBUTION AMPLIFIER DISTRIBUTOR
Input : 1x S-VIDEO (Y/C), Stereo Audio (AR/AL) Output : 8x S-VIDEO (Y/C), Stereo Audio (AR/AL)
S-VIDEO AUDIO
SB-3709 1x8 Distribution Amplifier
SB-3709M 1RU 19inch Rack Metal case
Ear Rack : 1U-300L
INTRODUCTION
DIAGRAM TYPICAL
SB-3709 is a 1 input to 8 outputs S-Video & Stereo Audio Distribution Amplifier. Video Bandwidth 440MHz Distribution Amplifier product. It’s one of the most innovative S-Video(Y/C) and Stereo Audio (AR/AL) distribution amplifier product on the market today. Support 19 inch Ear mount pair part number
INPUT OUTPUT
#1U-300L and MRM is 19 inch 1RU Rack mount type. It has 1 individual inputs
OUTPUT OUTPUT
with 8 individual outputs. Because it is a distributor, SO the (1) input maybe
OUTPUT
distribution to any (8) outputs in the same time. It completely eliminates the need to constantly move around S-Video and Stereo Audio input and output
DVD Player
cables. This distribution amplifier is ideally suited for distributing S-Video/
DV
D
Audio signals from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box Devices to TV for resolution 480p, 720p.
07
HDTV HDTV
FEATURES
SPECIFICATIONS
01. Support 1x8 Composite S-Video-Stereo Audio Distribution Amplifier 02. Distributing S-Video(Y/C) and Stereo Audio(AR/AL) Signals 03. Support HDTV Resolutions for 480i, 480p, 576p, 720p 04. S-Video Bandwidth : 440MHz (-3dB), 200 mVp-p 05. Audio bandwidth : 60MHz 06. Audio Frequency Respond : 20Hz ~ 20KHz 07. Application Source devices from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box
Type of distributor
1 input to 8 outputs Distribution Amplifier
Type of Signals
S-Video (Y/C) via 1x RCA Female Connector Stereo Audio (AR/AL) via 2x RCA Female Connectors
S-Video Bandwidth
440MHz, (-3dB) 2V p-p
Audio Bandwidth
60MHz, (-3dB)(Audio-Right=60MHz, Audio-Lift=60MHz)
Audio Frequency Respond
20Hz ~20KHz
08. Power switch control via selection pushbuttons with LED readout
All Hostile Crosstalk -56dB @ 5MHz, -45dB @ 50MHz
09. Enclosure type : SB-3709M Support 19 inch Ear & 1RU Rack mountable
Scan Rates Accepted 50Hz or 60Hz
10. Support Lower power consumed full load under 480 mA
Slew Rate
1000V/us, Fixed internal gain of 2
11. Power supply offer a universal type 100~240 VAC switch
Controls
Power switch selection via pushbuttons with LED readout
Safety Approvals
CE, FCC, VCCI, Erp, WEEE
Dimension (WxDxH)
SB-3709 : 9.45" x 5.70" x 1.77" (240mm x 145mm x 45mm) SB-3709M : 11.97" x 6.06" x 1.73" (304mm x 154mm x 44mm)
Weight
0.5 kg / 1.10 lb ---- SB-3709 1.4 kg / 3.08 lb ---- SB-3709M
Power Voltage Input DC 12V @1A
07-22
2015 Copyirghted All Rights Reserved.
SB-3737SV 1x8 S-VIDEO•DIGITAL•VIDEO•AUDIO DISTRIBUTION AMPLIFIER DISTRIBUTOR
Input : 1x S-VIDEO(Y/C), DIGITAL(S/PDIF), COMPOSITE VIDEO, Stereo Audio (AR/AL) Output : 8x S-VIDEO(Y/C), DIGITAL(S/PDIF), COMPOSITE VIDEO, Stereo Audio (AR/AL)
DIGITAL S-VIDEO
VIDEO
PRO AUDIO
Ear Rack : 1U-440L
INTRODUCTION
DIAGRAM TYPICAL
SB-3737SV is a 1 input to 8 outputs S-Video, Digital Audio, Composite Video & Stereo Audio Distribution Amplifier. The Video Bandwidth 440MHz Distribution Amplifier product. It’s one of the most innovative S-Video (Y/C), Digital (S/PDIF), Composite Video and Stereo Audio (AR/AL) Distribution Amplifier product on the market today. Support 19 inch Ear mount pair
OUTPUT OUTPUT
part number #1U-440L and MRM is 19 inch 1RU Rack mount type. It has 1
OUTPUT
individual input with 8 individual outputs. Because it is a distributor, so the (1)
OUTPUT
INPUT
input may be distribution to any (8) outputs in the same time. It completely eliminates the need to constantly move around S-Video(Y/C), Digital Audio, Composite Video and Stereo Audio input and output cables. This Distribution Amplifier is ideally suited for distributing AV signals from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box
HDTV
Devices to TV for resolution 480p, 720p.
HDTV
DV
FEATURES
07
DVD Player
D
SPECIFICATIONS
01. Support 1x8 S-Video, Digital, Video & Audio Distribution Amplifier
Type of distributor
1 input to 8 outputs Distribution Amplifier
Type of Signals
S-Video (Y/C), Via 1x Mini-Din 4P Female Connector Digital Audio (S/PDIF), via 1x RCA Female Connector Composite Video, via 1x RCA Female Connector Stereo Audio (AR/AL) via, 2x RCA Female Connectors
Video Bandwidth
440MHz, (-3dB) 2V p-p,
Audio Bandwidth
Digital Audio : 110MHz, (3dB), Stereo Audio : 60MHz, (-3dB) (Audio-Right=60MHz, Audio-Lift=60MHz)
08. Power switch control via selection pushbuttons with LED readout
Audio Frequency Respond
20Hz ~20KHz
09. Wall mounted Ear Rack included
All Hostile Crosstalk
-56dB @ 5MHz, -45dB @ 50MHz
10. Support Lower power consumed full load under 820 mA
Scan Rates Accepted 50Hz or 60Hz
02. Distributing S-Video(Y/C), Digital(S/PDIF), Composite Video and Stereo Audio(AR/AL) Signals 03. Support HDTV Resolutions for 480i, 480p, 576p, 720p 04. Video Bandwidth : 440MHz (-3dB), 200 mVp-p 05. Audio bandwidth : 60MHz. Digital Audio : 110MHz 06. Audio Frequency Respond : 20Hz ~ 20KHz 07. Application Source devices from VCRs, Camcorders, Video Game Console, Video CDs, DVDs, Satellite Receivers, CATV Set-Top Box
11. Power supply offer a universal type 100~240 VAC switch
Slew Rate
1000V/us, Fixed internal gain of 2
Controls
Power switch selection via pushbuttons with LED readout
Safety Approvals
CE, FCC, VCCI, Erp ,WEEE
Dimension (WxDxH) 17.32" x 7.87" x 1.73" (440mm x 200mm x 44mm) Weight
2.45 kg / 5.4 lb
Power Voltage Input DC 12V @1.25A
2015 Copyirghted All Rights Reserved.
07-23