Preview only show first 10 pages with watermark. For full document please download

Shoppro - Winzer

   EMBED


Share

Transcript

SHOPPRO THE ULTIMATE IN PRECISION AND QUALITY SHOPPRO CUTTING TOOLS 135º Split Point Drill Bits ShopPro Premium Drill Bits are the best on the market and are specially designed to last longer and save you money! • Manufactured from a special high molybdenum tool steel for rigid strength • Nitro-Carbonized finish for optimum lubricity and substantially longer cutting life • 135° split point, self-centering for fast penetration and easy starting on rounded surfaces Prefix No. Description 661.04 661.05 661.12 661.08 661.03 661.06 661.40 661.020 661.021 661.41 Mechanics Length 3/8” Reduced Shank Mechanics Length Quick Release Mechanics Length Jobber Length Fractional Jobber Length Number Jobber Length Letter Metric Jobber Length Screw Machine (Stub) Length Fractional, Number and Letter Twin End (Body) Drill Left handed Drill Bits • Effective replacement for cobalt drills in work hardening stainless steel applications due to the split point and thinner web construction • Runs cooler, uses less torque • Made in the USA Our Mechanics Length (Prefix 661.04) as well as our 3/8” Reduced Shank Drill Bits (Prefix 661.05) 3/16” and larger, have 3 flats on the shank that allows for a strong, positive chuck grip. **Refer to product catalog for available sets Premium Silver and Deming Drill Bits Available under prefixes (661.30 and 661.31) • Manufactured from a premium grade of M-7N molybdenum high-speed steel • 118° Split Point reduces thrust and eliminates walking at the drill point • 1/2” Shank • 3” of flute, 6” overall length • 3 Flats on the shank virtually eliminates chuck slippage • Nitride surface-treated to increase hardness without increasing brittleness • Body and clearance surface-treated for maximum lubricity • Recommended for use in stainless steel and other hard metal drilling • Expands the size range capacity of a 1/2” portable drill chuck • 33/64” diameter up to 1-1/2” diameter • Made in USA Titanium Nitride Coated Cobalt Spot Weld Drill Bits ShopPro Cobalt Spot Weld Drill Bits provide amazing performance on the newest and toughest steels on today’s vehicles! • Titanium Coated M-42 Cobalt Steel • ShopPro Centering Tip • Tin Coating doubles the life of the tool by giving it additional lubricity and protects the cutting edges in tough removal applications Part No. Diameter Length Type 697.10096 697.10097 M8 M10 2.25” 2.25” Single End Single End • Designed to penetrate the newest high-strength, high alloy steels commonly used in the automotive and fleet industries • Requires a slower operating speed of 490 RPM when drilling difficult materials versus the1800 RPM of a conventional spot weld drill bit • Made in the USA SHOPPRO CUTTING TOOLS Solid Carbide Drill Bits ShopPro Solid Carbide Drills are ideal for drilling steel, cast iron and other non-ferrous materials in challenging applications. • • • • Jobber Length 118° Split Point (sizes larger than 7/64”) Regular 25° helix and polished flutes for rapid chip removal Recommended for use under high-drilling temperatures and where the drill body must withstand continuous abrasion • For use in CNC Machines (Not recommended for hand-drilling due to brittleness of solid carbide) • Available in fractional sizes 1/16” – 1/2” • Sets available as well as a replacement index • Made in USA Part Number Size Part Number Size Part Number Size 611.37.116 1/16” 661.37.732 7/32” 661.37.38 3/8” 611.37.564 5/64” 661.37.1564 15/64” 661.37.2564 25/64” 611.37.332 3/32” 661.37.14 1/14” 661.37.1332 13/32” 611.37.764 7/64” 661.37.1764 17/64” 661.37.2764 27/64” 611.37.18 1/8” 661.37.932 9/32” 661.37.716 7/16” 661.37.964 9/64” 661.37.1964 19/64” 661.37.2964 29/64” 661.37.532 5/32” 661.37.516 5/16” 661.37.1532 15/32” 661.37.1164 11/64” 661.37.2164 21/64” 661.37.3164 31/64” 661.37.316 3/16” 661.37.1132 11/32” 661.37.12 1/2” 661.37.1364 13/64” 661.37.2364 23/64” **Refer to product catalog for available sets - 29 PC Solid Carbide Set (1/16” - 1/2”) - Starter set includes 6 sizes 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8” - Replacement Index • Heavy-duty drills feature a regular helix and polished flutes for rapid chip removal • Recommended for use under high-drilling temperatures and where the drill body must withstand continous abrasion • Ideal for drilling steel, cast iron and other non-ferrous materials where greater tortional stresses are encountered Premium Quality Taps ShopPro Taps are the ultimate in precision and quality! • • • • • • • • Hi-Tungsten and Hi-Molybdenum tool steels Bright finish Precision ground tap threads for the ultimate in precision and accuracy Longer lasting and out perform other high-speed steel taps Available in Spiral Point, Taper, Plug and Bottom in both Fractional and Metric 3-Piece Sets available Pipe Taps (NPT Thread) available Made in USA **Refer to product catalog for available sets Taps Tap Wrenches Prefix Description Part No. Description For Tap Sizes 661.14 661.19 661.20 661.21 661.22 661.25 661.2 661.4 661.24.25 661.24.26 661.40 T-handle Tap Wrench #2 T-handle Tap Wrench #4 Adjustable Tap Wrench 7-3/4” DAL Adjustable Tap Wrench 11” DAL Adjustable Tap Wrench 19-1/2” DAL #0 - 1/4” #12 - 1/2” 4-40 - 1/2” 1/4” - 3/4” 1/2” - 1-3/8” Spiral Point Taps Straight Flute 3 Piece Sets Straight Flute Taps Bottoming Straight Flute Taps Plugs Straight Flute Taps Taper Pipe Taps NPT Thread SHOPPRO CUTTING TOOLS High Speed Steel Spot Weld Drill Bits Individual Part No. Bulk Pack Part No. (20 per) 661.16.65 661.17.8 661.16.65.1 M6.5x90mm 661.17.8.1 M8x90mm Description ShopPro – Your choice for all spot weld removal tools! Designed to effectively cut auto body panel spot welds while leaving the second panel free of holes. Cost effective alternate to other spot weld drill bits due to its rigid durability and tool longevity. • Special Hi-Tungsten/Hi-Molybdenum alloy construction • Heavy-duty spur point • Ferro-Gold surface treatment for maximum lubricity and smooth cutting • Heat-treated and stress relieved for longer tool life • 3 Flats on the Shank virtually eliminates chuck slippage • Made in USA Premium Step Drills For Step Drills that last and outperform the competition, ShopPro is the right choice! • • • • 135° split point self-centers and easily starts Special Moly Alloy Steel Gold surface-treated The dual flute construction drills clean accurate holes in thin materials quickly and easily • 3 Flats on the shank • For use in all thin metals, rigid plastics such as plexiglass, wood or composite materials with a thickness equal to or less than the step thickness • Made in the USA **Refer to product catalog for available sets Part No. Hole Sizes 661.110.700 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 13/32”, 7/16”, 15/32”, 1/2”, 3/16”,1/4”, 5/16”, 3/8”, 7/16”, 1/2” 3/16”,1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8” 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4” 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” 13/16”,27/32”, 7/8”, 29/32”, 15/16”, 31/32”, 1”, 1-1/32”, 1-1/16”, 1-1/18” 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/18”, 1-1/4”, 1-3/8” 661.110.701 661.110.702 661.110.703 661.110.704 661.110.710 661.110.711 Solid Carbide Burs ShopPro Solid Carbide Burs deliver the performance and long life that your industry demands! Solid Carbide Burs are one of the most versatile metal working tools. Used widely in the automotive, aerospace, foundry, power station and engineering industries. Burs are used in mold and pattern making, die sinking, tool making and maintenance. • • • • • 1/4” and 1/8” shank available Double Cut and select sizes in Single Cut Standard and Mini cut lengths available Solid Carbide cutter for Steel, Stainless Steel and Aluminum available Many shapes in stock such as: Cylindrical, Ball Nose, Ball, Oval, Round Nose, Pointed Cone, Inverted Cone, Round Tree, 14° Included Angle, Cone and Flame • For use in high speed die grinders • Made in USA • Available under Prefix 661.01 **Refer to product catalog for available sets Shank Size 1/4” 1/4” 3/8” 3/8” 3/8” 3/8” 3/8” SHOPPRO CUTTING TOOLS Spiral Flute Reamers ShopPro Reamers get the job done, from automotive to industrial! • M-7N Molybdenum High Speed Steel • Ferritic Nitro Carburizing surface treatment that gives a hard, protective layer which increases hardness without increasing brittleness • Gold surface-treated • Specifically designed for enlarging existing holes in structural steel plates commonly found in truck frames, rail cars, bridges and pressure vessels • Left hand spiral with right hand cut eliminates “hogging” into holes and the need for stop collars • Made in USA Hex Shank Spiral Flute Construction Reamers • Specially designed with a magnet to protect against the danger and loss of a falling tool • Meets OSHA 29CFR Part 1926.759 (Falling object protection) Part No. Diameter Point Diameter Min. Start Hole Size Overall Length Hex Shank Wrench Size 661.16.916 9/16” .343 7/16” 5-7/8” 1-1/16” 661.16.58 5/8” .343 7/16” 6-3/8” 1-1/16” 661.16.1116 11/16” .375 15/32” 6-3/8” 1-1/16” 661.16.1316 13/16” .468 35/64” 6-7/8” 1-1/4” 661.16.1516 15/16” .585 5/8” 6-7/8” 1-7/16” 661.16.11116 1-1/16” .807 7/8” 6-7/8” 1-5/8” 661.16.11316 1-3/16” .719 1” 6-7/8” 1-13/16” Spiral Flute Car Reamers • • 3 Flats on Shank Four-piece set available (661.15.04). Includes: 3/8”, 1/2”, 5/8”, & 3/4” diameter reamers Part No. Diameter Point Diameter Min. Start Hole Size Overall Length Shank Wrench Size 661.15.38 3/8” .250 5/16” 4-5/8” 3/8” 661.15.12 1/2” .281 3/8” 5-7/8” 1/2” 661.15.916 9/16” .343 7/16” 5-7/8” 1/2” 661.15.58 5/8” .343 7/16” 6-3/8” 1/2” 661.15.34 3/4” .406 1/2” 6-7/8” 1/2” 661.15.1 1” .594 7/8” 6-7/8” 1/2” Tap and Die Assortments ShopPro Premium Taps and Dies are your best choice for precision and quality! • • • • Special tool steel, gold surface-treated Recommended for use in production tapping and drilling in work hardening grades of stainless steel and other hard metal applications Precision ground threads for accuracy and performance Supplied in sturdy red plastic case Part No. Description 661.24.5 661.24.10 661.24.12 661.24.05 40 Piece, Straight Flute Plug Taps and Hex Dies 40 Piece, Spiral Point Taps and Hex Dies 23 Piece, Metric Spiral Point Taps and Hex Dies 37 Piece, Metric Plug Taps and Hex Dies **Refer to product catalog for available sets and replacement tools SHOPPRO CUTTING TOOLS Portaband Blades ShopPro Premium Bi-Metal Portaband Blades with Matrix II Cutting Edges are long lasting and fast cutting! Part No. • Premium variable pitch blades offer high heat, wear and shock resistance • Use on machinable metals, including stainless steel, pipe, tubing and solids • Fits all standard portable bandsaw machines • 44-7/8”x1/2”x.020” • Sold by the individual blade 660.561014 10/14 660.561418 14/18 TPI Power-Brite Surface Conditioning Discs Part No. Size Grade Color Qty Per Box 50 Pack Part No. 100 PK w/Holder Part No. 821.074800 2” Coarse Brown 50 821.074800.1 821.074800.100 821.074810 2” Medium Maroon 50 821.074810.1 821.074810.100 821.075150 2” Very Fine Blue 50 821.075150.1 821.075150.100 821.074850 3” Coarse Brown 25 821.074850.1 821.074850.100 821.074860 3” Medium Maroon 25 821.074860.1 821.074860.100 821.075130 3” Very Fine Blue 25 821.075130.1 821.075130.100 821.074820 4” Coarse Brown 25 821.074830 4” Medium Maroon 25 • • • • • • • Newest generation of non-woven abrasives High initial rate of cut Resists loading on soft materials Removes old gaskets, coatings and sealants Fits Roloc™ style disc pad Sold by the disc or by the 50 or 100 pack (2” and 3” only) Max 25,000 RPM when used with holder (820.05539) Strip Discs Part No. 821.07472 821.07473 Heavy Duty Surface Conditioning Discs Part No. Size Grade Color Qty Per Box 100 PK w/Holder Part No. 821.59341 2” Coarse Brown 50 821.59341.100 821.59342 2” Medium Maroon 50 821.59342.100 821.59361 3” Coarse Brown 25 821.59361.100 821.59362 3” Medium Maroon 25 821.59362.100 Description 4” X 5/8” Strip Disc 4-1/2” X 7/8” Strip Disc • Ideal for cleaning and cutting through heavy rust, corrosion stains, scale, dirt, paint, adhesives and residue of old seals and gaskets • Non-woven material has outstanding life that lasts up to 30% more than other materials • Reinforced fiberglass backing to create a depressed center wheel for use with angle grinders • Quickly removes contaminants exposing bare metal for panting, welding and other coatings • Safer than wire brush because there are no dangerous edges or sharp bristles to cause injury SHOPPRO CUTTING TOOLS Hook & Loop Disc Power-Grit Quick-Change Disc Part No. Grit Size Part No. Size Grade Qty Per Box 898.349506 80 5" 820.013980 2” 24 100 2” 36 100 898.349507 100 5" 820.013970 898.349508 120 5" 820.013960 2” 50 100 2” 60 100 898.349509 150 5" 820.013955 898.349510 180 5" 820.013950 2” 80 100 2” 120 100 898.349511 220 5" 820.013940 898.349512 240 5" 820.014080 3” 24 50 820.014070 3” 36 50 820.014060 3” 50 50 820.014055 3” 60 50 820.014050 3” 80 50 820.014040 3” 120 50 898.349514 320 5" 898.349515 400 5" 898.349517 600 5" 898.349606 80 6" 898.349607 100 6" 898.349608 120 6" 898.349609 150 6" 898.349610 180 6" 898.349611 220 6" 898.349612 240 6" 898.349614 320 6" 898.349615 400 6" 898.349617 600 6" • The Shop Pro Disc cuts costs with increased performance • Shop Pro H&L products are semi-open, stearated B-weight PSA discs • High Quality abrasive grains, grinding aids and backings are used to create a cost effective and superior product with outstanding performance • Fits Roloc™ style disc holder • Longer life and higher cut rate than both 3M Green Corps™ and Norton Norzon™ in head-to-head testing • Cool running, resists loading • Zirconia Alumina • Green color • Sold by the disc Socatt Style Quick Changes Discs Part No. Size Grade 820.013810 2” 36 820.013813 2” 60 820.013814 2” 80 820.013816 2” 120 820.013819 3” 24 820.013820 3” 36 820.013823 3” 60 820.013824 3” 80 820.013826 3” 120 • • • • • Fits Socatt style disc pad Aluminum oxide 2 ply discs Color: Brown Ideal for flat or contour surfaces Use For: general purpose grinding, deburring and blending on ferrous metals • Discs are sold individually Mini Type 1 Cut-Off Wheels Part No. Grade Dia. X Thickness x Ardor 886.700 ZA-60 3” X 1/32 X 1/4” 886.701 ZA-60 3” X 1/32” X 3/8 886.702 ZA-36 3” X 1/16” X 1/4” 886.703 ZA-36 3” X 1/16” X 3/8” 886.704 ZA-60 4” X 1/32’ X 1/4” 886.705 ZA-60 4” X 1/32” X 3/8” 886.706 ZA-36 4” X 1/16” X 3/8 886.707 ZA-36 4” X 1/16” X 1/4” Trimmable Flap Disc Aluminum Wet Cut Cloth Rolls (Super Blue) Part No. Type 27 Size Grit 685.1.500 4-1/2 x 5/8-11” 40 685.1.501 4-1/2 x 5/8-11” 60 685.1.502 4-1/2 x 5/8-11” 80 685.1.503 6 x 5/8-11” 40 685.1.504 6 x 5/8-11” 60 685.1.505 6 x 5/8-11” 80 Part No. Grit Roll Length Yards 886.9312 320-J 1-1/2” x 20 yds 886.9314 240-J 1-1/2” x 20 yds 886.9316 180-J 1-1/2” x 20 yds 886.9317 150-J 1-1/2” x 20 yds 886.9318 120-J 1-1/2” x 20 yds 886.9319 60-J 1-1/2” x 20 yds 886.9320 80-J 1-1/2” x 20 yds • Super Blue from ShopPro is a new aluminum oxide abrasive cloth that is 100% impervious to bonding degradation by water, cutting oils, grease chemicals and other solvents • Available in dispensing rolls “Super Blue” is ideal for deburring, cleaning and polishing metal parts exposed to fluids • It will not load or shed from exposure to solvents making it the most cost-effective finishing cloth available for industrial and automative applications • Trimmable Zirconia flap disc backing easily trims down to expose flaps for extended working life and allows more of the flap disc to be used for fewer disc changes • Premium Zirconia Alumina grain with a poly/cotton heat treated backing provides low stretch and strength for the high Zirconia concentration • Recommended for aggressive use and heavy-duty applications • To trim down the backing, simply grind the backing edge against a metal edge until the flaps are exposed to the level needed • Contaminate-free Aluminum Oxide Cloth Roll Assortment Super Blue Combo pack 886.95218 • Convenient Dispenser Box • 1-1/2” X 10 yrd 80 Grit • 1-1/2” X 10 yrd 120 Grit • 1-1/2” X 10 yrd 150 Grit 886.95219 • Convenient Dispenser Box • 1-1/2” X 10 yrd 180 Grit • 1-1/2” X 10 yrd 240 Grit • 1-1/2” X 10 yrd 320 Grit Aluminum Oxide Cloth Roll Assortment Refill Rolls 1-1/2” x 10 yds Part No. Grit 886.175 150-J 886.180 120-J 886.185 80-J • Handy dispenser • Box of three 1-1/2” x 10 yard rolls • Three different grits (80, 120, 150) per box 4060 E Plano Parkway | Plano, TX 75074 | 1-800-527-4126 | www.winzer.com Copyright © 2016 Winzer 979.8931