Transcript
GeBE Label Paper
Label Paper Roll „Thin Label“ for GeBE Printer Series GPT-4352 l GPT-4378 GPT-4389 l GPT-4454
GeBE Dokument-Nr.:
KI-E-713-V1.0 Article No.: 13388 Status: 26.03.2012 Printed: 26.03.2012 German: KI-D-712
Short Information Selecting the right thermal paper The color processing in thermal printing is generated in the coating itself, making the thermal paper part of the printing system and decisively affecting the overall result. The wrong thermal paper or one of minor quality can damage a printer within a short period of time. Only specified papers guarantee that the indicated life time is to be achieved.
The GeBE logo is a registered trademark of GeBE Elektronik und Feinwerktechnik GmbH. All other brands named in this brochure are trademarks of their respective companies. Errors and changes reserved. The technical data given are non-committal information and do not represent any assurance of certain features. Our terms of payment and delivery apply. Copyright © 2012 GeBE Elektronik und Feinwerktechnik GmbH. All rights reserved.
GeBE Elektronik und Feinwerktechnik GmbH Beethovenstr. 15 • D-82110 Germering • Germany • www.gebe.net Telefon: +49 (0) 89/894141-31 • Fax: +49 (0) 89/8402168 • email:
[email protected]
GeBE E+F GmbH • www.gebe.net • GeBE Doc.No. KI-E-713-V1.0 • Label Specification
Page 1 of 4
Label Specification – Selecting the right thermal paper
Short Description of the released topcoat thermal paper General The released label paper with back barrier is a thermal paper consisting of an undercoat, a thermo coat and a top coat. The coat covers the paper against external influences from the frontside. From the backside, the back barrier avoids that e.g. clue or softening agents reacting with the paper. Shelf life before and after thermo print Storing the label paper at a constant temperature of 23 ± 5 °C at 50 ± 10% humidity, the shelf life is up to 10 years before usage and up to 12 years archivability after print. The paper must be protected against intensive solar radiation and day light, as well as exposure to chemical fumes. Print and application testing Perform a printout test to verify the usability of the selected paper.
GeBE Label Specification:
Article no. 12346 12542 12698
Roll specification in mm *) GPR-T151-
X
Y
-114-059-025-120A-Label/110x76 -057-060-025-120A-Label/52x51 -057-031-012-120A-Label/52X51
76,2 50,8 50,8
109,5 52 52
Paper
Z
Diameter in mm *) roll core
113,5 57,3 57,3
59 60+3 31
128 µm 128 µm 128 µm
25 25 12
thickness
*) tolerance ± 0,5 mm
GeBE E+F GmbH • www.gebe.net • GeBE Doc.No. KI-E-713-V1.0 • Label Specification
Page 2 of 4
Label Specification – Selecting the right thermal paper Label positioning through black marks for printers for printer mechanisms GPT-4352 MiniMulde LTPZ 245 GPT-4378 Flash FTP 628 GPT-4389 Sky FM 205 GPT-4454 MaxiMulde ELM 208 MP 205 SS 205 LTP 1245
Black Mark Positions (tolerance ± 0,5 mm) Article no. 12542 / 12698:
Article no. 12346:
GeBE E+F GmbH • www.gebe.net • GeBE Doc.No. KI-E-713-V1.0 • Label Specification
Page 3 of 4
Label Specification – Selecting the right thermal paper Technical data of the label paper Physical characteristics Grammage Thickness Humidity Brightness Smoothness (Bekk) Tensile strength (MD/CD) Tearing resistance (MD/CD)
Typical value 59 ± 5 g/m2 63 ± 5 µm 6.5 ± 1 % (R457-) > 90 % > 500 s > 3 / > 1.5 kN/m > 300 / > 300 mN
Remark ISO 536 ISO 534 ISO 287 ISO 2470 ISO 5627 DIN EN ISO 1924/1 DIN EN 21974
Image development characteristics Image Printing speed Archivability Start temperature (OD 0,2) Effective temperature (OD 0,8) Saturated optical density
Typical value
Remark
schwarz max. 200 mm/s min. 12 Jahre 75 ± 5 °C 80 ± 5 °C >1
depends on printer and settings depends on storage condition X-Rite 530, TP3000QM X-Rite 530, TP3000QM X-Rite 530, Atlantek 200 (4 inch/s)
Resistance against Water Alcohol Oil or grease Softeners Special adhesives Heat
good good good good very good standard
Static sensitivity
Dynamic sensitivity
Technical data of the back barrier Physical characteristics Grammage Thickness Tensile strength (MD/CD) Smoothness (Bendtsen) Cobb 60
Typical value 45 ± 2 g/m2 45 ± 5 µm > 2.5 / > 1.5 kN/m 80/250 (unbeschichtete Seite) 20 – 26 g/m2
Remark ISO 536 ISO 534 ISO 1924/1 ISO 8791-2 ISO 535
Technical data of the adhesive Physical characteristics Precoating on back barrier Adhesive type Applied grammage of the layer
Typical value 1.5 g/m2, solventless silicone Permanent waterbased modified acrylic 20 ± 2 g/m2 (dry weight)
Remark for release properties ISEGA approved
Hint: During the print process, little amounts of adhesive can escape from the label paper. This can stick down to the printer mechanism. Therefore regularly cleaning of the printhead is highly recommended (detailed description see operation manual).
GeBE E+F GmbH • www.gebe.net • GeBE Doc.No. KI-E-713-V1.0 • Label Specification
Page 4 of 4
