Preview only show first 10 pages with watermark. For full document please download

Shure Sm58 Collar Replacement

   EMBED

Share

Transcript

Shure SM58 Collar Replacement Shure SM58 Collar Replacement This guide shows you how to dissemble the collar of the microphone. The collar is basically where the microphone screws together. This guide shows you how to get to the inside of the microphone. Written By: nat coll © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 3 Shure SM58 Collar Replacement INTRODUCTION The collar is the place the top and bottom of the microphone screw together. After unscrewing it, you will have access to most of the internal parts of the microphone. © iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 3 Shure SM58 Collar Replacement Step 1 — Collar  Grab the microphone base with one hand. With the other hand, grab just below the grille (the collar). Twist the collar clockwise to loosen it.  Be careful to not pull on the collar or you may rip the wires from the faceplate. To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-23 09:18:28 PM. © iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 3