Transcript
The Kramer SID-VGA UXGA Step-In Commander
Figure 2 illustrates how to connect the SID-VGA to a source and switcher.
Congratulations on purchasing your Kramer DigiTOOLS® SID-VGA UXGA Step-In Commander which is ideal for boardrooms and presentation rooms. The Kramer SID-VGA is a VGA (up to UXGA) and unbalanced stereo audio remote control panel that is used to remotely take control of a compatible switcher, for example, the VP-81SID. Figure 1 and Table 1 define the SID-VGA UXGA Step-In Commander.
Figure 2: SID-VGA Wiring Connections
To connect the SID-VGA as illustrated in Figure 2: 1. Connect the VGA video source (for example, a computer graphics source) to the VGA connector on the front panel of the SID-VGA. 2. Connect the unbalanced stereo audio source (for example, a computer graphics source) to the 3.5mm mini jack AUDIO INPUT connector on the front of the SID-VGA. Figure 1: SID-VGA UXGA Step-In Commander Front and Rear Panel Table 1: SID-VGA UXGA Step-In Commander Front and Rear Features #
Feature
Function
1
AUDIO INPUT 3.5mm Mini Jack
Connect to the unbalanced stereo audio source
2
UXGA INPUT 15-pin HD Connector
Connect to the VGA video source
3
STEP IN Button
Press to switch the input to this remote control commander. The button lights when active
4
ON LED
Lights green when the unit receives power
5
LINE OUT Twisted Pair RJ-45 Connector
Connect to the TP input of a compatible switcher (for example, the VP-81SID) using CAT 6 or higher specification cable
6
Remote Switch Terminal Block Connections
Connect to the remote step-in switch
7
12V DC Power Connector
Connect to the power adapter
8
Remote LED Terminal Block Connections
Connect to the remote LED (observe correct polarity as shown in the graphic)
3. Using STP cable, connect the LINE OUT RJ-45 connector on the rear panel of the SID-VGA to one of the inputs on the rear panel of the VP-81SID (up to 50m away). 4. Optional—Connect the terminal block on the rear of the SID-VGA to the remote switch and LED. Note: The LED supply includes a current limiting resistor and is designed to work with any standard LED. 5. Connect the power adapter to the 12V DC connector on the rear of the SID-VGA and to the mains electricity.
Performing a Phase Calibration In the event that there is noise visible on the picture, you should perform a phase calibration. To perform a phase calibration: 1. Press the Step-In button to ensure that the SID-VGA is the active input. The Step-In button lights. 2. Press and hold the Step-In button. The phase calibration pattern is displayed. 3. Release the Step-In button as soon as the noise disappears.
Technical specifications Technical specifications of the SID-VGA are shown in Table 2. Table 2: Technical specifications1 of the SID-VGA UXGA Step-In Commander INPUTS: OUTPUT: STEP-IN COMMANDER DISTANCE: POWER CONSUMPTION: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS: WEIGHT: ACCESSORIES:
Video: 1 VGA (up to UXGA) on a 15-pin HD (F) connector Audio: 1 unbalanced stereo audio on a 3.5mm mini jack TP on an RJ-45 Ethernet connector 50m (164ft) up to 1080p @60Hz 12V DC, 380mA 0° to +40°C (32° to 104°F) –40° to +70°C (–40° to 158°F) 10% to 90%, RHL non-condensing 12cm x 7cm x 2.4cm (4.7" x 2.76" x 0.94”) W, D, H 0.3kg (0.66lbs) approx Power supply
SID-VGA UXGA Step-In Commander Installation Instructions For the latest information on our products and a list of Kramer distributors, visit our Web site at www.kramerelectronics.com
P/N:
2900- 000712
Rev:
4
Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail:
[email protected] P/N: 2900-000712 REV 4 1 Product details are subject to change without notice
