Transcript
Intrunet SPC series – advanced security for a connected world
The SPC series intrusion systems combine unmatched flexibility and scalability up to 512 wired/120 wireless zones, with a cost effective design and installation concept. All SPC controllers are designed to meet EN50131 standards, offering versatile operation and alarm management functionality. A common range of system components can be mixed and matched to expand the system and connect detectors and peripherals from the comprehensive Intrunet wired and wireless range. Straightforward system commissioning is achieved thanks to a powerful suite of configuration tools and a high speed/high length field bus, which also ensures high fault tolerance. The common look & feel’ across the hardware, configuration software and operational devices facilitate installation and set up and make operation very intuitive. With future-proof and high performance processor technology, the SPC series offer sophisticated functionality – including advanced door control and true system partitioning – for all application sizes and criticality, with ample room for expansions or upgrades.
Answers for infrastructure.
Planning for the future with scalable SPC series intruder alarm systems A modular range for all applications Scalable up to 512 wired or wireless zones, the modular SPC series facilitate the planning and installation phases thanks to common keypads, modules and expanders, which can be mixed and matched to fit applications of all sizes and allow the systems to grow with the customer requirements. Sophisticated programming, alarm management and control functionality – including door control – enable the system to be truly tailored to the most stringent security requirements. True system partitioning All SPC series controllers support “true” system partitioning, enabling multi-area and multi-tenant applications. Multitenant systems have the capability to report multiple URNs to central stations and enable private (SMS) notification to specific users. For added security, access to the Web server is also partitioned with authentication for each tenant. Advanced connectivity With increasing requirements for security services, connectivity to Alarm Receiving Centres (ARC) is now a major part of any security system. The SPC controllers can connect to an ARC over PSTN, GSM or IP with GPRS backup, also enabling multi-transmission of queued alarms over PSTN and GSM in a single call. Unmatched installation flexibility The SPC series system design concept delivers a consistent overall performance regardless of the system size. The concept is supported by the high-speed and high-length field bus, a reliable backbone that is ideal for larger system installations, as it delivers high fault tolerance (loop configuration) and allows up to 400 m to separate each bus device. Seamless on-site programming The panel can also be set-up locally using the keypads, PC application or preprogrammed configurations by connecting the “Fast Programmer” to the controller. A parameter server enables a streamlined
3
commissioning across a large installer team as it provides a common SPC configuration database. Engineer friendly menus (based upon mobile phone formats) along with system templates make the SPC series some of the quickest panels to program directly from the keypad.
Highlights Controllers from 8 to 512 alarm zones From 6 up to 512 freely programmable outputs Advanced door control management functionality on all models
Remote configuration with unique on-board Web server The higher end controller models can be configured remotely through any of the communication channels (PSTN, GSM or IP over Ethernet using the on-board Web server or through the PC application. This remote programming facility minimises expensive on-site engineering costs and can contribute to lower the overall costs of ownership for the enduser.
Powerful control and operation Various keypad variants are available, with additional integrated function modules such as card reader, Intrunet wireless receiver or voice assistance support. The 32-character standard keypads with clear text display provide a modern and functionally advanced user interface for all standard applications. The comfort keypad with its large LCD display and optional voice assistance functionality is ideal for a wide range of applications, from simple single area systems up to complex multi area systems. Control over SMS enables the system to be fully or part set and alarms to be restored. Advanced door management The SPC range cost effectively combine intrusion protection and door control management in the same controller. Compatible with card and card/PIN readers, they enable the control of up to 64 entry doors or 32 entry/exit doors, combined with automatic setting and unsetting of areas depending on the individual user rights. The definition of door groups supports high security applications, with additional functionality such as anti-passback, card holder escort or custodian access.
Separate intrusion and access event logs On-board Web server as standard on all models for local or remote programming and control IP communication on all SPC panels series PSTN and GSM plug-in modules for versatile communication Reliable High fault tolerance with highspeed X-BUS expansion interfaces Future-proof and scalable systems Reduced on-site engineering time with flexible programming options Comprehensive suite of communication devices enables full up-/downloads
EN Compliant (independently validated) Grade 2 & Grade 3
Remote or on-site programming and maintenance
Intrunet SPC panels System example Expander
Motion detection
IR160
Fast Programmer
IR60
SPC Pro software On-board Web server
System Keypad expander (8 inputs/ 2 outputs)
IR65
IR270 IR120
IR270
IR120
RS232
System expander (Smart Power Keypad Keypad System Supply) expander Wireless (8 outputs) expander
Keypad
IR120
IR60
IR160 IR60 IR65
IR60 IR65
USB
IR160 IR65
IR160 IR60 IR270 IR120
IR160
IR270
Keypad IR160
IR65
Keypad
SPC ZentraleExpander SPC ZentraleExpander
SPC Zentrale
IR65
IR270
IR120
IR60
IR270
IR270
IR270IR120
Wireless sensors
IR120
IR270 IR120
Wired sensors
IR270 IR270 IR120 IR120
SPC Zentrale
Manage/control/configure On-site connection via: IR120
Expander
Keypad
On-site services
SPC Zentrale
Keypad
Alarm signalling
Expander SPC Zentrale
Expander
Max. 400 m
IR60
IR65
IR160
2 X-BUS spurs Keypad IR65or 1 loop* IR160 IR160
SPC Zentrale
IR60
IR60 IR60
IR160
IR65
Expander
SPC Zentrale
IP
IR270
IR120
Ethernet
PSTN
GSM/ Keypad GPRS
IR60
IR120
IR270
IR120
IR65
IR160
Standard Keypad LCD keypad
Remote services
IR60
Manage/control/configureIR60
IR160
IR65
IR160
IR65
IR160
IR65
Keypad
SPC Zentrale
Expander
SPC Zentrale
1
Expander
Comfort keypad, indication/key 2-door switch expanders expander (door management) SPC Zentrale
IR270
Remote PC connection via: IR60 On-board Web server SPC Pro software SPC remote maintenance server SPC Safe with automated site administration over IP
IR65
X-BUS
IR270
IR120
Expander
Expander
SPC Zentrale IR1
20
PSTN
GSM/ GPRS IR2
Keypad
70
IR6
0
Text messages to mobile phones
IR6
5
IR270
IR120
Central Monitoring Station IR160 IR60 IR65
IR270
IR120
Control/event management
To Com IR270 IR120SPC
IR1
60
User notification SP C
Expander
SPC Zentrale
SPC Com IP alarm receiver (Ethernet with GPRS backup)
Ke
y
pa Keypad d
Ze nt ra le
Keypad Ex
pa
IR60
IR60
IR65
IR65
IR160
IR60
IR160
Connect on alarm/ event and on demand
Control/event management Keypad
nd
er
IP IR65 networkIR160 X-BUS SPCSPC Zentrale Zentrale
Expander SPCExpander Zentrale
Expander
Event messages via SMS Control commands via SMS
Other communications
*Dependent on panel. SPC4000 1 spur, SPC5000/6000 2 x spurs or 1 loop. IR120
Remote connection to an Alarm Receiving Centre
IR270
Versatile communications with plug-in GSM and PSTN modules
Remote event management and system control via SMS
Keypad
IR60
IR65
IR160 SPC Zentrale
Expander
4
Expander
Versatile operation and comprehensive alarm management functionality
Intuitive keypad for direct operation
User-friendly local operation The system features various setting options accessible through the keypads: in “FULLSET” mode, it gives full protection to a building whilst opening of entry/ exit zones will start the entry timer. Two “PARTSET” modes provide perimeter protection to a building while allowing free movement through the exit and access areas. When selected, these modes will exclude pre-defined zones from protection, and the alarm is instantly activated. Instant control and safe operation over Web browser The on-board Web server enables users or engineers to log on remotely from any PC and check the system and zones status, as well as logs and perform certain programming operations over IP such as area setting or unsetting. A “system alerts user page” provides information on all of the alerts that the user can clear or isolate. The alert signal (or zone) and its current status is displayed along with the action available to the user for each of the alert conditions. This enables faults to be isolated until rectified, without impacting the performance of the rest of the system. Remote system control Users or engineers can log on from any remote PC and check the status of alarms, view event logs or turn on and off different areas. Users can also be notified
5
Flexible remote control and operation via SPC Com or Web browser
of events via SMS text messaging and even control the panel via SMS commands sent over the GSM network (set, part-set, restore alarm). Direct alarm management The type of alarms generated by the SPC systems can vary depending on the type of zone that triggered the alarm activation (Each zone type will activate its own unique output type – an internal flag or indicator – that can then be logged or assigned to a physical output for activation of a specific device).
Powerful remote services On-site engineering time is minimised with remote configuration and control available through the unique Web server or a PC with SPC Pro – both allowing engineers to access secure a full range of service functions, via Broadband/LAN or data channels over GSM/PSTN.
Highlights
– A Full Alarm activation will report the alarm to the Alarm Receiving Centre (ARC) if one has been configured. – A Local Alarm activation will not attempt to call the ARC even if one has already been configured. – A Silent Alarm activation will not generate any visual or audible indications of the alarm. The alarm event will be reported to the ARC. Safer alarm handling The SPC Com alarm receiver software provides a graphical status representation of all SPC panels connected to the system. This enables a quicker event investigation and intervention. Actions undertaken in response to alarms can be logged for future reference, and response procedures can also be displayed to guide the user through the appropriate alarm handling steps.
Pre-defined operation modes facilitate set-up and reduce operator error Comprehensive system “set” options Local or remote system control Zone-specific alarm activation and transmission types Alarm transmission delay functionality with verification through event filtering Optimal queued alarms transmission in one call
Reduced on-site engineering time with flexible programming options Graphical system alarm status Log of alarm responses and procedures
Technical overviews Controllers
SPC4220 / SPC4320
Hard-wired zones (max.)
SPC5230
SPC5320
SPC5330
SPC6330
8 to 32
8 to 128
8 to 512
32
120
120
6 to 30
6 to 128
6 to 512
Number of areas (max.)
4
16
32
Number of doors (max.)
2 entry-exit/ 4 entry
16 entry-exit/16 entry
32 entry-exit/ 64 entry
Number of users (max.)
32
256
512
Wireless zones (max.) Programmable outputs (max.)
Field bus
1 X-BUS interface (1 spur)
X-BUS devices (max.)
11 (5 expanders + 4 keypads + 2 door expanders)
48 (16 expanders + 16 keypads + 16 door expanders)
128 (64 expanders + 32 keypads + 32 door expanders)
4
32
64
Yes
Yes
Yes
Calendars ”Cause & Effect” programming Event memory
2 X-BUS interfaces (2 spurs or 1 loop)
1,000
10,000 intrusion and 10,000 access events
Ethernet Language
On board
On board
On board
Multiple
Multiple
Multiple
Comfort keypad, indication expander, keyswitch
Supported
Supported
Supported
Remote maintenance server
Supported
Supported
Supported
SPC Safe
Supported
Supported
SPC Com
Supported
Supported
Supported
Supported
Supported
Supported
Fast Programmer
Supported
Operating voltage
Max. 750 mA (subject to size of battery fitted & Security Grade required)
Auxiliary power Battery (optional) Housing Security grade
Plug-on modules and accessories
Type Network connection
1 output with max. 750 mA (at 12 V DC) on integrated PSU on controller PCB Max. 7 Ah/12 V
Max. 17 Ah/12 V
Max. 7 Ah/12 V
Max. 17 Ah/12 V
Max. 17 Ah/12 V
Small metal enclosure
Hinged metal enclosure
Small metal enclosure
Hinged metal enclosure
Hinged metal enclosure
EN50131-1 (Grade 2, Class II)
EN50131-1 (Grade 3, Class II)
EN50131-1 (Grade 2, Class II)
EN50131-1 (Grade 3, Class II)
EN50131-1 (Grade 3, Class II)
SPCN110
SPCN310
PSTN module, V.90
GSM module incl. antenna
PSTN (analogue telephone network)
GSM / GPRS (Dual band)
Frequency
SPCN910
Communications Interface SiWay RF kit for panel Module
Supports 3rd party comms. devices Redcare, Dualcom
900/1800 MHz
SPCW101
External aerial kit Connection to SPCN310 or SPCW110 with 2 m cable
868 MHz
Wireless receiver Current consumption
SPCW110
SiWay RF receiver Min. 25 mA Max. 35 mA
Min. 130 mA Max. 130 mA
40mA consumption quiescent
Min. 10 mA Max. 10 mA 6
Keypads
SPCK420
SPCK421
SPCK422
SPCK620
SPCK623
SPCE120
SPCE110
Indication Expander with LED’s and function keys
Keyswitch Expander
Type
Wired LCD keypad Wired LCD keypad Wired LCD keypad with integrated with integrated card reader wireless receiver
Wired keypad with large LCD
Wired keypad with large LCD and integrated card reader and audio
LCD display
2 x 16 characters 2 x 16 characters 2 x 16 characters
128 x 64 pixels
128 x 64 pixels
Card reader
125 kHz (EM4102 or compatible)
125 kHz (EM4102 125 kHz (EM4102 or compatible) or compatible)
Voice annunciation
Supported SiWay RF receiver (868 MHz)
Wireless receiver Indication
3 status LED’s
3 status LED’s
3 status LED’s
5 status LED’s
5 status LED’s
16 LED’s (freely programmable)
2 LED’s (freely programmable)
Operation
2 soft keys and 1 navigation key
2 soft keys and 1 navigation key
2 soft keys and 1 navigation key
4 soft keys and 1 navigation key
4 soft keys and 1 navigation key
4 function keys (freely progr.)
Keyswitch with 3 positions (2-0-1)
9.5 – 14 V DC
9.5 – 14 V DC
9.5 – 14 V DC
9.5 – 14 V DC
9.5 – 14 V DC
9.5 – 14 V DC
9.5 – 14 V DC1
Min. 45 mA Max. 90 mA
Min. 80 mA Max.110 mA
Min. 50 mA Max.95 mA
Min. 55 mA
Min. 110 mA
Min. 30 mA Max. 90 mA
Min. 30 mA Max. 50 mA
Operating voltage urrent C consumption
Plastic enclosure (ABS)
Housing
Expanders
Type
Plastic enclosure Plastic enclosure Plastic enclosure Plastic enclosure Plastic enclosure Plastic enclosure (ABS) (ABS) (ABS) (ABS) (ABS) (ABS)
SPCE650
SPCE450
SPCW130
SPCA210
8 inputs /2 outputs
8 outputs
Wireless receiver
2-door expander
Harwired zones
8
Outputs
2
8
Card reader interfaces
SPCP332
SPCP333
SPCP432
SPCP433
Smart PSU (7 AH) Smart PSU (17 AH) Smart PSU (7 AH) Smart PSU (17 AH) with I/O-expander with I/O-expander with I/O-expander with I/O-expander
4
8
8
8
8
2
2
2
2
2
2 (Wiegand 26 bit/ Clock&Data) 1 entry/exit or 2 entry
Door capacity Wireless receiver
SiWay RF receiver (868 MHz)
voltage
9.5 – 14 V DC
230 V AC, +10 to –15%, 50 Hz
Auxiliary power
Max. 2 x 750 mA (subject to size of battery fitted & Security Grade required)
Battery
Max. 7 Ah/12 V Max. 17 Ah/12 V Max. 7 Ah/12 V Max. 17 Ah/12 V
Housing
Small metal enclosure
Plastic enclosure (ABS)
Cards & Tags
IB41-EM
IB42-EM
Hinged metal enclosure
IB44-EM
Small metal enclosure
Hinged metal enclosure
IB45-EM
Proximity 125 kHz (EM Technology)
Description
7
Printed ISO cards compliant with EM4102 reading technology. Can be used with the readers xx500-EM. Cards also include magnetic stripe and card number on back.
Adhesive tag with Siemens Blank printable ISO card Keyring tag with Siemens logo, logo, compliant with EM4102 compliant with EM4102 reading compliant with EM4102 reading reading technology. Can to be technology. Can be used with technology. Can be used with attached to existing magnetic the readers xx500-EM. Cards the readers xx500-EM. Card stripe cards when adding also include magnetic stripe number on front. EM4102 readers to an existing and card number on back. magstripe installation. Card number on back.
Readers
PP500-EM
HD500-EM
PR500-EM
SP500-EM
PM500-EM
Proximity 125 kHz (EM Technology)
Description
Interface to controller Environment
Remote/on-site programming and operation
Type
Availability
Heavy-duty card and PIN reader. Position indicator light and illuminated keypad make it easy to use in dark places. Tamper switch.
Heavy-duty card-only reader. Vandal-proof, impact and fire resistant. Popular both in vulnerable locations and modern office environments.
Card-only reader. Slim and compact.
Card-only reader. Compact design. Designed for mounting in single-gang back boxes.
Card-only reader. Designed for panel mounting. Suitable for most remote call-point locations.
BC-Link, Clock&Data or Wiegand
BC-Link, Clock&Data or Wiegand
BC-Link, Clock&Data or Wiegand
BC-Link, Clock&Data or Wiegand
BC-Link, Clock&Data or Wiegand
Indoor and outdoor use
Indoor and outdoor use
Indoor and outdoor use
Indoor and outdoor use
Indoor and outdoor use
SPCX410
SPCS310
SPC Web server
SPC Fast Programmer
SPC Pro programming software
On-board Web server
SPC41xx SPC52xx SPC53xx SPC63xx
SPC41xx SPC52xx SPC53xx SPC63xx
SPC52xx SPC53xx SPC63xx
– Save/back‑up site configurations (store up to 100 configuration files)
Common engineering tool for SPC series for configuration, commissioning and maintenance:
– Save default files (sites with static values for future reuse) – Retrieve/download firmware releases – 1MB memory Key functionality
Connection
USB (PC) and 10-pin socket (SPC controller)
– Offline preconfigurations – On site (RS232/ USB/IP) – Remote (PSTN/ GSM/IP over Ethernet)
RS232, USB, IP over Ethernet
SPCS320
SPCS410
SPC Remote SPC Safe site maintenance server administration server SPC52xx SPC53xx SPC63xx
SPC53xx SPC63xx Limited features for SPC41xx SPC52xx
SPCS510
SPC Com alarm receiving software
SPC53xx SPC 63xx
– Authenticated access
– Automatic or – Repository for all – Provides full manual technical SPC4000/5000/ alarming Chain, status report / log 6000 configuration from detector – Graphical status file transmission files with client / to receiver for representation from panels server architecture SPC53xx and with icons (SPC5000/6000) SPC 63xx to remote – Export of – Only the maintenance configuration files – Simple interface from SPC Safe parameters and server at to monitor and attributes of the predefined time database to local control a large configured devices intervals PC’s for offline panel park (status and options are configuration icon for each visible – Every status report changes in field connected panel) is stored with SPC Pro. – Accessible via any in a database – Supports PC with standard – Import of integration of SPC browser Com into existing SPC4000/5000/ – SPC Pro (standalone) as 6000 configuration CMS annunciation software via installer interface files in SPC Safe to maintenance database from local standard SurGard serial interface server PC’s after offline protocol) configuration – Notification in changes in field SPC Pro if results with SPC Pro requires attention by installer – Automatic update of central database – Supports up to via IP after local 250 Installation configuration change of panel – Reporting via (SPC53xx/63xx PSTN, GSM or IP model) (over Ethernet) GSM, PSTN, IP over Ethernet
GSM, PSTN, IP over Ethernet
IP over Ethernet
IP over Ethernet, IP over GPRS 8
Siemens plc I BT Security Products Suite 7 Castlegate Business Park Caldicot South Wales NP26 5AD UK Main: +44 (0) 1291 437920 Fax: +44 (0) 1291 437943
The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract.
www.siemens.co.uk/buildingtechnologies/securityproducts
