Preview only show first 10 pages with watermark. For full document please download

Sigma Inverter Data Logger With Web Server And Rs485 3 831063 901662

   EMBED


Share

Transcript

SIGMA INVERTER DATA LOGGER WITH WEB SERVER AND RS485 3 831063 901662 1. INTRODUCTION Sigma Inverter Data Logger is a complete system that provides you all important information, parameters and condition and allows full control over your inverters. 1.1 FEATURES - User friendy website with all actual monitoring data of inverters and weather station with charts Compatible with inverter brands Delta: http://www.solar-inverter.com /en-GB/index.htm and SMA: http://www.sma.de/en/ support for other inverters coming soon! HTTP Web server Telnet server (console) Local weather station (transmitter/receiver) Remote firmware upgrade Log file generation 2GB SD Card support 2 x RS485 (Modbus) port 1 x Ethernet(LAN) interface 3 x Open collector output (report status) Up to 32 slaves (single port or both ports together) Current Solar power indicator (meter) Efficiency indicator (meter) Daily energy indicator (meter) Daily income indicator (meter) S0 counter 3 x Analog input ▪ Temperature sensor ▪ Radiation sensor ▪ S0 counter ▪ Functions can be swapped - - ACCESS FROM ANY PART OF THE WORLD Sigma Inverter Data Logger is a web-based server. When connected to local network, you have full insight and control over Sigma Logger from anywhere on Earth via internet. STANDALONE SYSTEM Sigma Inverter Data Logger doesn’t need a computer or any extra equipment to operate. It’s powered by 24V supply, which is already included in package. If power supply fails, Sigma Logger has internal battery so no settings will be lost! EASY INSPECTION Sigma Inverter Data Logger is user-friendly system which provides you all important information on the very first page, so no navigating through system is needed for basic inspection. It includes graphic display for easy overview of daily, monthly or yearly power production. Inverter status can be inspected by simply clicking on it. PLUG AND PLAY Unlike our competition, no pre-setting is needed. With simple click network is scanned for inverters and system is set up into operating mode. Published by and copyright © 2011: Sat Control d.o.o. Pozenik 10, SI-4207 Cerklje Slovenia For more information, please contact our Customer Support Center. Phone: +386 4 281 62 22 (Charges depending on provider) E-mail: [email protected] All rights reserved. Trademarks mentioned in this document are the property of Sat Control d.o.o., its affiliates, or their respective owners. Subject to change without prior notice. The information in this document contains general descriptions of the technical options available, which may not apply in all cases. The required technical options should therefore be specified in the contract.