Transcript
Autoscope Solo® Terra™ Branch Cable
Description
Technical Specifications
This 3-conductor cable is designed to pass power and BPL (Broadband-Over-Power-Line) communication signals to Autoscope Solo Terra traffic detection cameras. Suitable for aerial and duct type installations, this cable typically goes from the Terra Interface Panel (TIP) in the traffic cabinet to the base of the traffic camera pole, where it is then spliced with the cable coming from the Autoscope Terra camera.
Features and Benefits • Black, white, and green color-coded conductors are easily identifiable to installers and signal technicians as hot, neutral, and earth ground • Sunlight and moisture resistant PVC outer jacket is durable, yet easy to work with • 14 AWG conductors are ideal for minimizing voltage drops over long cable runs
Conductors: Number of Conductors Conductor Material Conductor Size Stranding
3 Bare copper 14 AWG 7/0.0242
Insulation: Insulation Material Insulation Thickness Color Code
LDPE 0.0250” Black, White, Green
Outer Jacket: Jacket Material Jacket Thickness Nom. Outer Diameter Jacket Color
PVC, Sunlight Resistant 0.0450“ 0.355” Black
Performance Parameters: DC Resistance Capacitance Impedance Nom. Velocity of Prop.
2.73 Ω/Mft at 20°C 13.6 pF/ft nom. at 1 kHz 113 Ω ± 15%, 1-20 MHz 66.2%
General Parameters: Operating Temperature Weight per 1000 feet RoHS Compliant
75°C 80 lbs Yes
• RoHS Compliant Corporate Headquarters 199 Evans Way Branchburg, NJ 08876-4600 Ph: 908-231-1133 Fax: 908-707-0333
Visit us on the web at www.signalcontrol.com © 2010 Signal Control Products, Inc. All rights reserved. Signal Control Products, Inc. reserves the right to change or update these specifications at any time without prior notification. Rev. 7-27-12
Pennsylvania Branch Office 737 Hagey Center Drive, Unit B1 Souderton, PA 18964 Ph: 215-721-2210 Fax: 215-721-2240
