Preview only show first 10 pages with watermark. For full document please download

Similar Pages

   EMBED


Share

Transcript

MED-VIZION™ MRI LIGHTING  LED DOWN LIGHT ETS-Lindgren's Med-Vizion ZXR Down Light is the latest in lighting technology, specifically designed for MRI suite applications. It produces the equivalent of a 150 W incandescent light using only 32 W of power. This high-performance, light-emitting diode down light has no UV, IR, or RF emissions and features engineered heat displacement which prevents premature LED failure. Without filaments, the LEDs are unaffected by magnetic fields. MODELS ZXR-3000 AND ZXR-4000 ■■Maintenance-free Lighting Solution ■■Rated up to 50,000 Hours ■■Reduced Energy Consumption ■■MRI Safe ■■Camera ■■Easy Compatible Installation ■■Optional Dimmer Switch ■■Optional Trim Finish ■■Optional Lens Maintenance-free Use The Med-Vizion ZXR is a low-cost, maintenance-free lighting solution which greatly reduces the need for lamp replacement, a primary safety concern with traditional incandescent lighting. This also helps to reduce the amount of service-related accidents. Long Life Rating The lamp lifetime of 50,000 hours means less maintenance, lower operating costs and less room down time. Reduced Energy Consumption This reliable and efficient lighting also uses less energy. That means less electricity used while green initiatives are supported. It also means lower operating costs over time. MRI Safe The non-ferrous construction of the Med-Vizion ZXR makes it MRI safe and allows for use in any diagnostic MRI suite. Applications ■■Diagnostic MRI Suites ■■Inter-operative MRI Suites Optimal illumination is offered at task and floor levels. There is immense flexibility in suite design and functionality while interference with MRI imaging is avoided. Camera-compatible for Reduced Light Fluctuations ETS-Lindgren Med-Vizion Down Lights have been designed to match shutter speeds of many MRI video cameras. This will negate the visible light fluctuations or “flicker” that can be seen when viewing LED-illuminated objects through a camera lens. Easy Installation This light has been designed to operate on either 120 or 240 VAC. The simple control wiring offers a plug- and-play interface. Only two wires are needed to control all fixtures on a circuit compared, to two wires per fixture with other systems. Optional Trim Finishes Ordering information, following page. ZXR Down Lights come standard with white trim. Brushed nickel trim, antique bronze trim, or an antimicrobial white trim with 93% frosted lens can be ordered as optional. Optional Dimmer Switch An optional dimmer switch offers digital preset programmability with consistency throughout the dimming range. Various levels of illumination are available in one suite, with one dimmer unit controlling up to sixteen light fixtures. Standard ■■Light Assembly ■■Rails ■■Trim Ring —— Model T01WW White Trim ■■Manual Options ■■Trim Ring/Lens —— Model T03BN Brushed Nickel Trim —— Model T03ABS Antique Bronze Trim —— Model T04AAL3 Antimicrobial White Trim with 93% Frosted Lens ■■Low Voltage Filter ■■Custom Color Temperatures ■■Dimmer Signal Module for Customer-provided Lutron or Creston Dimming Controller UL 1598 Listed ets-lindgren.com MED-VIZION™ MRI LIGHTING  LED DOWN LIGHT Ordering Information When ordering the Med-Vizion Down Light, it should be ordered as Model # - Trim. For example: Ordering the ZXR-3000-T04AAL3 would be the ZXR-3000 with Antimicrobial White Trim and 93% Frosted Lens. Ordering the ZXR-4000-T03BN would be the ZXR-4000 with Brushed Nickel Trim. Technical Specifications Electrical (ZXR-3000) Light Source Correlated Color Temperature Input Voltage Input Current Input Power Electrical (ZXR-4000) High Power LEDs with Proprietary Reflector System 3000o K 120/240V, 50/60 Hz 1/0.5 Amp 32W Light Source Correlated Color Temperature Input Voltage Input Current Input Power High Power LEDs with Proprietary Reflector System 4000o K 120/240V, 50/60 Hz 1/0.5 Amp 32W Physical (ZXR-3000 and ZXR-4000) Length 35.56 cm 14.00 in 21.91 cm 8.60 in 8.33 cm 3.28 in 1.95 kg 4.30 lb 20.30 cm 8.00 in Width Height Weight Ceiling Clearance (Minimum) 17.15 cm ± 0.60 cm 6.75 in ± .25 in 2.00 cm .50 in to .75 in Cutout Diameter Ceiling Thickness (Max.) 90 Candela 75 300 177.8 mm (7.0 in) 60 560 45 13.5 mm (0.53 in) 880 132 mm (5.19 in) 321 mm (12.63 in) 0 15 30 354.8 mm (14.0 in) Degrees Candela Chart- Luminous Intensity Med-Vizion ZXR Product Diagram ets-lindgren.com Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 8/15 - PDF/RR © 2015 ETS-Lindgren  v3.0