Transcript
T F A DR Basler Accessories
Technical Specification POWER-I/O-PLC CABLE M5 4P/OPEN Order Numbers 2000031226 Document Number: AW001160 Version: 02 Language: 000 (English) Release Date: 22 January 2015
Contacting Basler Support Worldwide Europe Basler AG An der Strusbek 60-62 22926 Ahrensburg Germany Tel. +49-4102-463-515 Fax +49-4102-463-599
[email protected]
The Americas Basler, Inc. 855 Springdale Drive, Suite 203 Exton, PA 19341 USA Tel. +1-610-280-0171 Fax +1-610-280-7608
[email protected]
Asia Basler Asia Pte. Ltd. 35 Marsiling Industrial Estate Road 3 # 05 - 06 Singapore 739257 Tel. +65 6367 1355 Fax +65 6367 1255
[email protected]
www.baslerweb.com
All material in this publication is subject to change without notice and is copyright Basler AG.
AW00116002000
Basler Technical Specification
1 Introduction The Power-I/O-PLC+ cable with M5 connector and open end features an integrated PLC electronic. The electronic has been designed to adjust input voltage levels coming from PLC devices (up to 24 V) to the TTL voltage levels required by the camera (0 to 5 V). Table 1 contrasts these different voltage levels.
Camera Voltage
PLC+ Cable Input Voltage
Significance
Max. +24 VDC
Max. +24 VDC + 10 %
Operating voltage limit.
+0 to +1.4 VDC
+0 to +8.4 VDC
Voltage indicates a logical 0.
> +1.4 to +2.2 VDC
> +8.4 to +10.4 VDC
Logical state is undefined.
> +2.2 VDC
> +10.4 VDC
Voltage indicates a logical 1.
Table 1: Voltage Requirements
Basler Power-I/O-PLC Cable M5 4p/open
1
Basler Technical Specification
2
AW00116002000
Basler Power-I/O-PLC Cable M5 4p/open
AW00116002000
Basler Technical Specification
2 Technical Data Order Number
Description
2000031226
Applicable Cameras
Power-I/O Cable for PLC with M5 4-pin connector and open end, 10 m
ace CL
Table 2: Cable Types
Length depending on order number 100 27.5
3.5
130 max.
10 max.
6.5 0.5
2000... xx/yy
M5 4-pin plug
Electronic components inserted in the cable and covered by heat shrink tubing
Label with manufacturing date and order number
Open end
Dimensions in mm Fig. 1: Cable Overview
Wiring Information Pin Number
Wire Color
Designation
1
Brown
Camera Power
2
White
General Purpose I/O (GPIO)
3
Blue
Camera Power Ground
4
Black
GPIO Ground
Table 3: Wiring Information
Basler Power-I/O-PLC Cable M5 4p/open
3
Basler Technical Specification
AW00116002000
Physical Specifications Camera-Side Connector
M5, 4 pin
Host-Side Connector
None, open end
Cable Cross-Section
4 x 0.14 mm2 (close to AWG 26)
Cable Diameter
3.5 mm
Wire Insulation
PVC
Outer Jacket
PUR
Minimum Bending Radius
35 mm (10 x cable diameter), fixed installation
Maximum Bending Cycles
None (fixed installation only)
Suitable for Drag Chain Applications
No
Suitable for Robotics Applications
No
Table 4: Physical Specifications
Electrical Specifications Maximum Operating Voltage
See camera user’s manual
Wire Resistance
≤ 148 Ω/km
Table 5: Electrical Specifications
Environmental Specifications Operating Temperature Range
-25 °C - +80 °C (not moving)
Table 6: Environmental Specifications
Plug Specifications Durability
> 100 mating cycles
Contact Resistance
≤ 3 mΩ
Contact Plating
Gold
Protection Rating
IP67
Plug Insulation Material
PUR
Table 7: Plug Specifications
4
Basler Power-I/O-PLC Cable M5 4p/open
AW00116002000
Basler Technical Specification
General Information RoHS Compliance
Yes
CE Conformity
Yes (RoHS)
UL Conformity
No
Warranty
1 year
Table 8: General Information
The cables are intended for use with the camera specified in Table 2 only.
Read the camera user’s manual including the safety warnings before connecting the cable to the camera. The user’s manual also contains further information about pin assignments, power requirements, as well as comprehensive information about installing and using the camera. You can download the user’s manual and related documents for your camera free of charge from the Basler website: www.baslerweb.com.
Basler Power-I/O-PLC Cable M5 4p/open
5
Basler Technical Specification
AW00116002000
Revision History
Doc. ID Number
Date
Changes
AW00116001000
13 Jul 2011
Initial release of this document.
AW00116002000
22 Jan 20154
New cover photo. Changed the layout of the document. Added technical specifications in tables Table 1 and Table 3 to Table 8.
6
Basler Power-I/O-PLC Cable M5 4p/open
